Product Sheet - Projector Central

Specifications
Model
WD8200U / WD8200LU
Display technology
0.7" 1chip DMD, 12˚. LVDS,
Dark Chip 3TM with DDP3020(F)
Resolution
1280 x 800 (Total 1,024,000 pixels)
1024 x 768 (Total 786,432 pixels)
Brightness
Dual-lamp: 6500 lm
Single lamp: 3250 lm
Dual-lamp: 7000 lm
Single lamp : 3500 lm
1
Contrast ratio*
2000 : 1 (on/off)
1
Projection lens*
f=24.5-33.1mm, F=2.0-2.4
Zoom / focus*1
Powered focus / zoom (zoom ratio 1.35 : 1)
Picture size
40”-300” (100”=3.8m)
Source lamp
Dual / Single
Dual
Dual
Single
Single
Connection Terminals
2 3
1
1 S-Video/Video
4
5
6 7
8 9
2 PC/Component video input-1
3 Remote-1
:Off :On
10
Input terminals
PC: 5 BNC x 1, mini D-sub 15-pin x 1, DVI-D(with HDCP) x 1
Video: BNC x 1, S-Video (4-pin) x 1, HDMI (Ver 1.3, Deep Color) x 1
Communication
terminals
LAN (RJ-45): x 1 (projector control), RS-232C (in): D-Sub 9pin(male) x 1 (direct command is available.),
RS-232C (out): D-sub 9-pin(male) x 1 (direct command is available.)
Wired remote (in): x 1 ( 3.5mm stereo mini jack ), Wired remote (out): x 1 ( 3.5mm stereo mini jack),
Remote: D-sub 9-pin(female) x 1
11
342
506
Resolution: 640 x 400 - 1920 x 1200
True: 1024 x 768, Sync-on-Green available
Dimensions (W x H x D)
19.3” x 7.9” x 16.6” (exclude detachable terminal cover and protrusion)
Weight
35.3lbs (exclude detachable terminal cover)
Power supply
AC 100 - 240 V, 50/60 Hz
Included Accessories
AC Power Cable, RGB cable, RS-232C cable, Terminal-Cover, Remote Unit (incl. Battery),
User Manual CD, Safety Manual, Labels for ceiling mount usage
Warranty
3-Years Parts/Labor, 3-Years Express Replacement Assistance,
1-Year or 500 hours lamp warranty (whichever comes first)
*1 Varies depending on conditions. *The above specifications are for the standard lens model only. Specifications are different for
lens-less models. * Compliant with ISO21118 - 2005. * SXGA, XGA and SVGA are registered trademarks of IBM Corporation. * All
brand names and product names are trademarks, registered trademarks or trade names of their respective holders. * It's an
estimated life time and the lamp is to be shut off upon the arrival. Lamp life refers to the average time required for brightness to be
reduced by half, and not the time specified in the warranty. Service life may vary widely depending on the environment and
conditions, and whether or not cleaning and other maintenance procedures are followed.
192
421
142
Dimensions (unit: mm)
hours
hours
hours
hours
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM / PAL-60
Component video: 480i/p(525i/p), 576i/p(625i/p), 720p(750p 50/60Hz),
1080i(1125i 50/60Hz), 1080p(1125p 50/60Hz)
SCART (RGB + 1V sync, only mini D-sub 15-pin Terminal)
8 Serial RS-232C (I/O)
11 Main power switch
hour
2,000
4,000
4,000
8,000
Video compatibility
6 HDMI
10 Power in(3-pin with earth ternibal)
40”-300” (100”=3.8m)
Lamp mode
Normal
Low
Normal
Low
Resolution: 640 x 400 - 1920 x 1200
True: 1280 x 800, Sync-on-Green available
5 Remote-2 (IN/OUT)
9 LAN (RJ-45)
MULTIMEDIA DATA/VIDEO PROJECTORS
Computer
compatibility
4 PC/Component video input-2
7 DVI-D terminal (with HDCP, DVI-D 24-pin)
XD8100U / XD8100LU
0.65" 1Chip DMD, 12˚. LVDS,
Dark chip 2TM with DDP3020(F)
Screen Size and Projection Distance
Refer to the following table to determine the screen size and projection distance.
240
490
HOLES FOR HANGER (4 PLACES) [M4XDEPTH 10]
Front projection
Front projection, ceiling mounting
W
W1
W1
W
W1
H2
W1
192
H
H1
Center of the lens
H
120
9
H1
Center of the lens
* The lens focal point is the default set at the time of shipment from the factory.
L
L
L
H2
L
Maximum projection area
Options
Maximum projection area
Optional Lenses
OL-XD2000FR
OL-XD2000SZ
OL-XD2000LZ
Rear-projection Short -throw
Fixed Lens
Short-throw Zoom Lens
Long-throw Zoom Lens
Converter Lens
(mounted on the standard lens)
Converter Lens
(mounted on the standard lens)
Optional Lenses
OL-XD2000TZ
OL-XD8000UZ
Telescopic-throw Zoom Lens
Ultra-telescopic-throw Zoom Lens
Color Wheel
CW-FC2
Color-emphasized color wheel
WD8200U
Image(WXGA 16: 10)
Diagonal Size
Height
Width
inch cm inch cm inch cm
40 102 34
86 21 54
60 152 51 129 32 81
80 203 68 172 42 108
100 254 85 215 53 135
150 381 127 323 79 202
200 508 170 431 106 269
250 635 212 538 132 337
300 762 254 646 159 404
Distance from Screen
Default Height
Shortest(Wide) Longest(Tele) Projected Image(HO)
inch
cm
inch m inch m
58 1.5 80 2.0
0
0
88 2.2 121 3.1
0
0
118 3.0 162 4.1
0
0
148 3.8 203 5.2
0
0
224 5.7 306 7.8
0
0
299 7.6 408 10.4
0
0
375 9.5
0
0
450 11.4
0
0
H1
10
15
19
24
36
49
61
73
Movable V Position
H2 H1
inch
cm
5 25 0
0
7 37 0
0
9 49 0
0
11 62 0
0
17 92 0
0
23 123 0
0
28 154 0
0
34 185 0
0
3
5
7
9
13
17
21
26
Movable H Position
W1
W1
inch
cm
3
0
9
0
5 13 0
0
7 17 0
0
9 22 0
0
0
13 33 0
0
17 44 0
21 55 0
0
0
26 65 0
9
13
17
22
33
44
55
65
3
5
6
8
12
16
20
24
Movable H Position
W1
W1
inch
cm
3
0
8
0
5 12
0
0
6 16
0
0
8 20
0
0
12 30
0
0
16 41
0
0
20 51
0
0
24 61
0
0
8
12
16
20
30
41
51
61
H2
12
17
23
29
43
58
72
86
XD8100U
Distance from Screen
Screen(XGA 4: 3)
Movable V Position
Default Height
Diagonal Size
Width
Height
Max. Zoom Min. Zoom Projected Image(H) H1
H2 H1
inch
cm
inch
cm
inch cm inch cm inch cm inch m inch m
40 102 32
0
81 24 61 54 1.4 74 1.9
0
0
2 30 0
12
60 152 48 122 36 91 82 2.1 112 2.8
0
0
0
3 46 0
18
80 203 64 163 48 122 110 2.8 150 3.8
0
0
0
4 61 0
24
100 254 80 203 60 152 138 3.5 189 4.8
0
0
0
6 76 0
30
150 381 120 305 90 229 208 5.3 284 7.2
0
0
0
8 114 0
45
200 508 160 406 120 305 279 7.1 380 9.7
0
0
0
11 152 0
60
250 635 200 508 150 381 349 8.9
0
0
0
14 191 0
75
300 762 240 610 180 457 419 10.6
0
0
0
17 229 0
90
* The above figures are approximate and may be slightly different from the actual measurements.
H2
6
9
11
14
21
28
36
43
MITSUBISHI DIGITAL ELECTRONICS
AMERICA, INC.
MITSUBISHI ELECTRIC SALES
CANADA, INC.
Presentation Products Division
Phone: 888.307.0349
www.mitsubishi-presentations.com
Display & Imaging Solutions Division
Phone: 905.475.7728
www.mitsubishielectric.ca
LITWD8200U_XD8100U
New publication, effective July 2010.
Specifications subject to change without notice.
The Pinnacle of Digital Projectors
Image Quality, Functionality & Reliability – The bar just got raised a level higher.
Imagine a long presentation or seminar in a large, bright room like a hall or auditorium. The impact of that presentation will depend on the performance of the
projector you use. To ensure that nothing goes wrong, these projectors are equipped with digital light processing (DLPTM) technology that reproduces high-definition
images in high contrast and with superior brightness. Built for durability and easy installation and maintenance, they last and last with minimal upkeep. Both models
are equipped with dual lamps, allowing the continuous projection of images for long periods of time together with greatly increased reliability. For installation models,
our aim was to ensure the advanced level of performance essential for such units.
Brilliant Support for Various Presentation Venues
including business, education and entertainment
For Auditorium
For board room, conference hall
For Digital Signage
High Brightness
High Image Quality
Powerful Large-screen Images in
Well-lit Halls/Auditoriums
Original Technologies Reproduce Strikingly Sharp Images
Ample Features for Increased Expressiveness and Operation Ease
Super Resolution
7000lm High Brightness*
This innovative advanced image
processing algorithm is a product of
Mitsubishi Electric. The technology
analyzes blurred components of
the original images, estimates
the high-resolution data not provided
in the original signal—and corrects
the image quality. The result is
clear projection of images such
as people's faces in fine detail.
The XD8100U, delivers super bright 7000 lumen* images.
This high brightness level is perfect for presenting in large
meeting rooms and conference halls. *WD8200U is 6500 lumens.
Estimation of resolution compensation data
Low-resolution image
Enlargement
High resolution data that does not exist
in the enlarged image is estimated by
Mitsubishi’s proprietary image
processing algorithm.
Ultra Quiet 28dBA Operation
Modern Design
A projector’s an noise can be distracting during a presentation or videoconference.
The XD8100U and WD8200U projectors operate at a significantly low noise level
of only 28dBA (i.e., using a
Examples of Noise Levels
single lamp in “low lamp” mode).
20dBA: Rustling leaves, the ticking of
As a result, presentations and
a wall clock (from 1m in front)
28dBA
conferences can be held without
30dBA: A whisper, a suburban
area very late at night
the distraction of projector noise
in the background.
40dBA: A quiet neighborhood,
A stylish white-toned projector shell was chosen in
consideration of use as a ceiling-mounted installation.
Additionally, the detachable terminal cover hides projector
cables, showing the ingenuity incorporated to ensure
an appealing unit that matches most interior spaces.
small birds chirping
Compensation
Natural Color Matrix (NCM)
In addition to conventional red (R), green (G) and blue (B) color gradations, the
intermediate colors of yellow (Y), magenta (M) and cyan (C) can each be controlled
independently. Accentuating specified colors according to need brings the
reproduction of vivid color tones one step closer to natural.
Enlarged image (original)
Image processed by Super Resolution
Geometric Correction
Trapezoidal distortion caused when the projector is not positioned directly in front of
the screen is corrected in both vertical and horizontal directions.
Durable and Reliable – Confident Nonstop Use Year-round
The dual lamp system and lamp relay function enable continuous operation with no
risk of the image going out. Dust resistance and cooling performance are greatly
enhanced by the automated self-cleaning filter and heat-pipe cooling system
technologies that have proven so successful in air conditioners, enabling extended
continuous use for monitoring and digital signage applications.
Compared to liquid-cooling systems, the heat-pipe cooling system has a simpler
structure and does not require a power supply, enabling cost reductions and
a compact design. Not only is it highly reliable, it also provides exceptional
energy savings and quiet operation as well.
Long 4000hrs Lamp Life
Dual lamp and
lamp relay mode
24 hours a day, 7 days a week
Anxiety-free continuous operation
Filter cleaned
automatically
Cornerstone Correction
Heat-pipe Cooling System
Heat-pipe
cooling system
Designed with a lamp temperature controlling
system, the XD8100U and WD8200U can support
an estimated lamp rating of up to 4000 hours
(in low mode). The long estimated lamp life makes
dramatic reductions in overall cost of ownership by
decreasing the frequency of lamp replacements.
screen
Pixel conversion is used to correct
trapezoidal and diagonal distortion that
causes oblique images, ensuring the proper
aspect ratio.
Curved Surface Projection Correction
Automatic Self-Cleaning Filter
4,000-hour
lamp
For the XD8100U and WD8200U, we've utilized the same
mechanism (mesh filter and cleaning brush) that has a
proven track record in Mitsubishi Electric air conditioners
and air purifiers. It automatically prevents dust from
building up in the radiator of the heat-pipe cooling
unit for the digital micromirror device (DMD), ensuring
trouble-free use for extended periods of time.
First lamp replacement
Factory-installed lamp
Edge blending creates a seamless
image by adjusting the brightness at
adjoining edges when using multiple
projectors side-by-side to reproduce
single widescreen images.
Multiple projectors side-by-side
Image overlap apparent
Projectors are equipped with a RJ-45 LAN terminal for remote operation.
Additionally, when used with Crestron® software, integrated control of up to 250
projectors including power on/off control, message display and confirmation of lamp
service hours is possible using RoomView™/
e-Control™. Both projectors are equipped
with AMX Device Discovery for
simplified device management and
compatible with PJLink™.
The trademark of PJLink is trademark applied for registration or registered
trademark in Japan, the United States, and other countries and areas.
Secound lamp
replacement
6,000 hours
Control operations remotely up to 98ft from the projector when using the
wireless remote controller (must be standing in front of the projector). When
using the wired remote controller, projector operation is possible at a distance
of up to 328ft.* These options give the presenter the ability to move more freely
at big venues, such as a large meeting rooms or auditoriums.
Network Connectivity
Stand-by Mode under 0.3W*
Lower
running
costs
Stand-by (low mode) power consumption is less than 0.3W, offering increased
energy savings and further contributing to environmental preservation.
With edge blending
Without edge blending
*When in stand-by (low) mode. At this time, use of the LAN function, RS-232C output and Remote 1 is not possible.
Motorized lens shift
2-Screen mode
(PinP : XD8100U / Split : WD8200U)
Test pattern
Mechanical shutter
Direct power off
Color Matching
3,000 hours 4,000 hours
ID-compatible Remote Control
ID settings for up to 63 projectors are possible. Setting the IDs allows control
of each individual projector when multiple projectors are installed.
*Depends on cable performance.
Edge Blending
First lamp replacement
Remote Control to Match the Installation
Edge Blending and Color Matching
Edge blending function
Factory-installed lamp
360° Projection
Images can be projected over a full 360° range along
the vertical axis* including reproduction on the ceiling
or floor. The application possibilities are limitless.
These projectors are equipped with technology for correcting distortion that occurs
when projecting images onto curved surfaces. This advanced feature is practical for
unique applications such as projecting onto pillars at special event sites.
Lamp Life Comparison
3,000-hour
lamp
Choose between two color wheels, one accentuating color and the other
emphasizing brightness, depending on the type of images to be projected.
This interchangeability enables a more appropriate expression of the images
being reproduced.
Control Projector from Remote Locations
Lamp Relay Mode
A dual lamp light source offers numerous advantages. Key benefits include the fact
that the lamps can be rested (turned off) alternately during long-term usage, ensuring
continuous projection. Additionally, if one of the lamps goes out, there is an automatic
back-up function that activates the other lamp, enabling reliable, continuous projection
with no interruption.
Terminai Cover
Optional
*Excluding use in high-altitude mode.
Keystone Correction
High Reliability
Interchangeable Color Wheel
8,000 hours
Lamp life is an estimated period based on verification under proper operating conditions and is not related
to the duration of the warranty. The lamp will turn-off automatically when usage has reached the specified
maximum lamp hours. Service life may vary widely depending on usage and operating environment conditions,
as well as adherence to the maintenance and cleaning procedures provided in the User’s Manual.
The color matching function corrects
variations in the color reproduced by
each projector when multiple
projectors are used simultaneously.
This color homogenization enables
the integrated display of images.
Color matching function
Lamp side replacement
Closed caption support
High-altitude mode
(2,000 to 2,700 m)
OSD menu multilanguage
compatibility (19 languages*)
*Previous languages: Chinese, English, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish,Swedish
Languages added: Dutch, Indonesian, Malaysian, Norwegian, Thai, Turkish, Vietnamese