Philips 19PFL4322/45 User manual

Register your product and get support at
www.philips.com/welcome
15PFL4122
19PFL4322
20PFL4122
EN
USER MANUAL
Downloaded From TV-Manual.com Manuals
www.philips.com/support
Country
Austria
Belgium
Czech Rep
Denmark
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Luxemburg
Netherlands
Norway
Poland
Portugal
Slovakia
Spain
Sweden
Switzerland
UK
Number
0810 000205
078250145
800142840
3525 8759
09 2311 3415
0821 611655
01803 386 852
0 0800 3122 1280
0680018189
01 601 1777
840320086
40 6661 5644
0900 8407
2270 8111
0223491504
2 1359 1442
0800004537
902 888 784
08 5792 9100
0844 800 544
0870 900 9070
This information is correct at the time of press.
For updated information, see www.support.philips.com
Downloaded From TV-Manual.com Manuals
Model
Serial
Tariff
€0.07/min
€0.06/min
free
local
local
€0.09/min
€0.09/min
free
free
local
€0.08/min
local
€0.10/min
local
local
local
free
€0.10/min
local
local
local
Positioning the TV
Disposal of your old product
Product information
The model and serial number can be found at
the rear of the TV and on the packaging.
Your product is designed and manufactured with
highly quality material and components, which can
be recycled and reused. When this crossed-out
wheeled bin symbol is attached to a product, it
means the product is cov-ered by the European
Directive 2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and elec-tronic
products. Please act according to your local
rules and do not dispose of your old products
with your normal household waste. The correct
disposal of your old product will help prevent
potential negative consequences for the
environment and human health.
Disposal of batteries
The batteries supplied do not contain the heavy
metals mercury and cadmium. Please check on
how to dispose of exhausted batteries according
to local regulations.
• Standby power consumption is less than 1W.
• The power consumption of the set is given on
the type plate at the rear of the TV.
• For more product specifications, see the
product leafl et on www.philips.com/support.
Note: specifi cations and information are
subject to change without notice.
For further assistance call the customer support
service in your country. The corresponding
telephone numbers and addresses are given in
the supplied worldwide guarantee booklet.
Pixel characteristics
Your TV display is made with high-precision
technology with a high number of color pixels.
Although it has effective pixels of 99,999% or
more, black dots or bright points of light (red,
green or blue) may appear constantly on the
screen. This is a structural property of the
display (within common industry standards)
and is not a malfunction.
Downloaded From TV-Manual.com Manuals
Reference Table of Countries
The following table lists the countries and their
abbreviations.
Abbreviation
Country
Abbreviation
Country
A
Austria
NL
Netherlands
B
Belgium
P
Portugal
CH
Switzerland
S
Sweden
D
Germany
CZ
Czech Republic
DK
Denmark
H
Hungary
E
Spain
HR
Croatia
F
France
PL
Poland
FL
Finland
RO
Romania
GB
England
RUS
Russia
GR
Greece
SK
Slovakia
I
Italy
SLO
Slovenia
IRL
Ireland
TR
Turkey
L
Luxembourg
---
Others
N
Norway
Downloaded From TV-Manual.com Manuals
Information for Users in the UK
This information is specific to the UK. If you are
using your TV in the UK, use this information in
conjunction with the rest of this manual.
Positioning the TV
For the best results, choose a position where light
does not fall directly on the screen, and at some
distance away from radiators or other sources of
heat. Leave a space of at least 5cm around the TV
for ventilation. Ensure that curtains, cupboards
and other items cannot obstruct the air flow
through the ventilation apertures. The TV is
intended for use in a domestic environment only
and should never be operated or stored in excessively hot or humid atmospheres.
Interference
The Department of Trade and Industry operates
a Radio Interference Investigation Service to help
TV licence holders improve reception of BBC and
IBA programmes where they are being spoilt by
interference. If your dealer cannot help, ask at a
main Post Office for the booklet “How to Improve
Televi-sion and Radio Reception”.
Mains Connection
Before connecting the TV to the mains, check
that the mains supply voltage cor-responds to
the voltage printed on the type plate on the rear
panel of the TV. If the mains voltage is different,
consult your dealer.
Important
This apparatus is fitted with an approved moulded
13 AMP plug. Should it become necessary to
replace the mains fuse, this must be replaced with
a fuse of the same value as indicated on the plug.
Downloaded From TV-Manual.com Manuals
1. Remove fuse cover and fuse.
2. Replace the fuse.
The replacement fuse must comply with BS
1362 and have the ASTA approval mark. If the
fuse is lost, contact your retailer in order to
verify the correct type.
3. Refit the fuse cover.
If for any reason the fitted plug is not suitable
for your socket outlet, consult your retailer or
a qualified electrician before proceeding with
the installation.
Connecting the Aerial
The aerial should be connected to the socket
marked : at the back of the set. An inferior
aerial is likely to result in a poor, perhaps
unstable picture with ghost images and lack
of contrast. Make-shift loft or set-top aerials
are often inadequate.Your dealer will know
from experience the most suitable type for
your locality. Should you wish to use the set in
conjunction with other equip-ment, which connects to the aerial socket such as TV games, or
a video camera it is recommended that these be
connected via a combiner unit to avoid repeated
connection and disconnection of the aerial plug.
Fitting the Stand (If Provided)
Use only the stand provided with the set.
Ensure that the fixings are properly tight-ened.
A diagram showing how to assemble the stand
is packed with the stand. Never use a make-shift
stand, or legs fixed with screws.
Introduction
EN
Thank you for purchasing this television set.
This handbook has been designed to help you install and operate your TV set.
We would strongly recommend that you read it thoroughly.
We hope our technology meets entirely with your satisfaction.
FR
NL
DE
Table of Contents
Important safety information
Installation
Presentation of the LCD Television . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The keys on the TV set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manual store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Channels setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other settings in the Install menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation
Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Screen Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using in PC monitor mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting Peripheral equipment
Bottom connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Practical information
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IT
2
3
3
4
6
7
7
8
8
9
9
10
11
12
13
13
14
14
15
15
DK
NO
SE
FI
RU
ES
PT
GR
TR
HU
PL
Recycling
The materials used in your set are either reusable or can be recycled.
To minimise environmental waste, specialist companies collect used appliances
and dismantle them after retrieving any materials that can be used again (ask your
dealer for further details).
1
Downloaded From TV-Manual.com Manuals
CZ
SK
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
Important
• For ventilation, leave at least 4” to 6” free
all around the TV. Do not place the TV on a
carpet.
• The equipment shall not be exposed to dripping
or splashing.
• The equipment shall not be exposed to rain or
moisture and objects filled with liquids, such as
vases, shall be placed on the apparatus.
• The apparatus must be connected to a mains
socket outlet with a protected earthed connection. (not available for 15”)
• The appliance coupler is used as the disconnect
device of this apparatus, the disconnect device
shall remain readily operable. (not available for
15”)
General
Care of the screen
• Do not touch, push or rub or strike the screen
with anything hard as this may scratch, mar or
damage the screen permanently.
• And please do not rub with dust clothes with
chemical treatment.
• Do not touch the surface with bare hands or
greasy cloth (some cosmetics are detrimental to
the screen).
• Unplug the TV before cleaning the screen.
• When the surface becomes dusty, please wipe
gently with absorbent cotton or other soft
materials like chamois soaks.
• Do not use acetone, toluene and alcohol because
they cause chemical damage.
• Do not use liquid cleaners or aerosol cleaners.
Wipe off saliva or water drops as soon as possible.
The long time contact with the screen causes
deformations and colour fading.
Do not insert the power plug in a wall
socket or hang the TV to the wall before all
Electric, Magnetic and Electromagnetic
connections are made.
Fields (“EMF”)
• Place or hang the TV wherever you want, but
make sure that air can circulate freely through • Philips Royal Electronics manufactures and sells
the ventilation slots.
many products targeted at consumers, which, like
any electronic apparatus, in general have the ability
to emit and receive electromagnetic signals.
• One of Philips’ leading Business Principles is to
take all necessary health and safety measures for
our products, to comply with all applicable legal
requirements and to stay well within the EMF
standards applicable at the time of producing the
products.
• Philips is committed to develop, produce and market products that cause no adverse health effects.
• Do not install the TV in a confined space such • Philips confirms that if its products are handled
as a book case or a similar unit.
properly for their intended use, they are safe to
• To prevent any unsafe situations, no naked
use according to scientific evidence available today.
flame sources, such as lighted candles, should be • Philips plays an active role in the development of
placed in the vicinity.
international EMF and safety standards, enabling
• Avoid heat, direct sunlight and exposure to rain Philips to anticipate further developments in stanor water.
dardisation for early integration in its products.
• The equipment shall not be exposed to dripping
or splashing.
2
Downloaded From TV-Manual.com Manuals
Presentation of the LCD Television
POWER
POWER
PROGRAM
PROGRAM
MENU
MENU
Television keys:
• POWER: to switch the TV on or off.
• VOLUME -/+: to adjust sound level.
• MENU: to access or close menus.
The PROGRAM -/+ keys can be used to select an
adjustment and the VOLUME -/+ keys to make that
adjustment.
• PROGRAM -/+(- P +): to select programmes.
VOLUME
VOLUME
Side of set:
• Earphone
• AV 1: Video In, S-Video, Audio L/R input
• CV1/AV 2: Component Video (YPbPr),
Composite Video (Video In), Audio L/R input
19PFL4322 / 20PFL4122
HDMI
HDMI
VGA
VGA
AUDIO
AUDIO IN
IN
EXT
EXT
AUDIO
AUDIO IN
IN
EXT
EXT
PC
PC IN
IN
15PFL4122
HDMI
HDMI
VGA
VGA
PC
PC IN
IN
3
Downloaded From TV-Manual.com Manuals
Rear of set:
• TV 75
• EXT
• PC IN: VGA and Audio
• HDMI
• MAINS
• DC IN (for 15PFL4122 only)
Remote Control Keys
1)
POWER
Press to turn on/off the TV or to standby
mode.
Note: The TV is never powered off
completely unless it is physically unplugged.
1)
2)
3)
2)
These four color buttons allow you to access
the item or the page indicated by corresponding color in teletext.
3) Sleep button
Press to set the LCD TV to turn itself off
within a certain time.
4) Smart Sound button
Press repeatedly to select among the settings;
Personal, Speech, Music, Movies, Multimedia.
Cursor (
/
)
5) These 4 keys are used to move around the
menus.
Menu
6) To call up or exit the TV menus.
4)
5)
6)
7)
A/CH
8)
9)
A/CH
7) To access the previous viewed programme.
VOL +/8) To adjust the sound level.
10)
i+
AV
Mute
9) To mute or restore the sound.
Information button
10) Press to see the current channel number on
the TV screen.
4
Downloaded From TV-Manual.com Manuals
Remote Control Keys
11) Screen Format
(11
(12
(13
(14
(15
(16
A/CH
(17
(p.11)
12) I-II button / Sound mode
Press repeatedly to select MONO, DUAL I,
DUAL II, STEREO, NICAM MONO, NICAM
DUAL I, NICAM DUAL II, NICAM STEREO.
13) Teletext button
Teletext On/Off
Teletext hold
Freezes the teletext page.
Teletext mix
Teletext background become transparent,
content mixes with images.
Teletext reveal/conceal
Press to toggle between conceal and reveal
mode.
Main index
Press to return to the main index.
Teletext enlarge
Press to enlarge context to two times larger.
14) Smart Picture button
Press repeatedly to select either Personal, Rich,
Nature, Soft, or Multimedia of picture setting.
i+
AV
(18
15) OK button
Press OK button to access Program list or
confirm your selection.
(19
16) Incredible Surround button
Adds greater depth and dimension to TV sound.
Select from On or Off.
17) P +/Press to adjust the channel up or down.
Press to roll the teletext page up or down.
18) Number button
Press the number buttons for direct access to
the TV channels. For 2 digit channel, enter the
2nd digit after enter 1st digit.
19) AV button
Press to select the video input source: TV, CVI,
AV 1, AV 2, PC, EXT and HDMI.
5
Downloaded From TV-Manual.com Manuals
Installing your television set
Positioning the television set
Place your TV on a solid stable surface. To avoid
danger do not expose the TV to water, or a heat
source (e.g. lamp, candle, radiator). Do not obstruct
the ventilation grid at the rear.
Connecting the aerials
• Insert the aerial plug into the
socket at the
rear of the set.
• Connect the power lead to the television and the
mains plug into the wall socket (220-240 V/50 Hz).
For connecting other appliances see page p.13.
POWER
PROGRAM
MENU
VOLUME
Switching on
To switch on the set, press the POWER key. A blue
indicator comes on and the screen lights up. Go
straight to the Quick Installation chapter. If the TV
remains in standby mode (red indicator), press the
P -/+key on the remote control. The indicator will
flash when you use the remote control.
19PFL4322
20PFL4122
15PFL4122
Note-Quick installation
ATS (Automatic Tuning System) feature
If the transmitter or cable network sends the
automatic sort signal, the programmes are
numbered correctly. In this case, the installation is
complete. If this is not the case, you can use the
Channel setting menu to number the
programmes correctly.
ACI (Automatic Channel Installation)
feature
If a cable system or a TV channel which broadcasts
ACI is detected, a programme list appears.
Without ACI broadcast, the channels are
numbered according to your language and country
selection. You can use the Channel setting menu
to re-number them.
6
Downloaded From TV-Manual.com Manuals
Quick installation
When you turn on the TV set for the first time, a
menu is displayed on screen. This menu prompts
you to select the country and language for the
menus:
(1)
(2)
Country
Language
...
English
The search starts automatically. All the available TV
programmes and radio stations will be stored. This
operation takes a few minutes. The display shows
the progress of the search and the number of
programs found. At the end of the search, the menu
disappears.
To exit or interrupt the search, press MENU. If no programme is found, consult the possible solutions p.15.
If the transmitter or cable network sends the automatic sort signal, the programs will be numbered
correctly. In this case, the installation is complete.
If the menu is not displayed, press the MENU key to
storemenu.
displayAutothe
Please wait
UseProg.
the
keys on the remote control to
found 0
Freq. your
246.50 MHz
select
country and validate with .
keys
Next select your language using the
and
validate with .
Main Control
Install
6
If this is not the case, you need to use the
Channel setting menu to number the programs
correctly. ( p.8)
Auto store
Language
Country
Auto store
Manual
Store
Start ?
Manual store
Channel setting
Factory reset
This
menu is used to store the programmes
one at a time.
Info
Press the MENU key.
With the cursor, select the Install menu then
Manual store:
Main Control
Install
6
Manual store
Language
System
Country
Manual store
Auto store
Prog. No
Manual store
Finetune
Channel setting
Store
5
Factory reset
Info
Manual store: press . The search starts. Once
a programme is found, the scanning stops and its
name is displayed (when available). Go to the next
step. If you know the frequency of the required
programme, this can be entered directly using the
0 to 9 keys.
If no picture is found, consult the possible solutions
(p.15).
Prog. No.: enter the required number with the
or 0 to 9 keys.
Finetune: if the reception is not satisfactory,
adjust using the
keys.
Store: press . The program is stored.
System: select Europe (automatic
detection*) or Western Europe (BG standard),
Eastern
Main ControlEurope (DK standard), United King4
Install
Channel setting
dom
(I standard)6 or France
(LL’ standard).
Language
Channel edit
Country
Channel swap
Auto store
Name edit
Manual store
Channel sort
Channel setting
Factory reset
7
Info
Downloaded From TV-Manual.com Manuals
Repeat steps
to
for each programme to store.
To quit the menus, press MENU.
Main Control
Install
6
System
Country
Manual store
Channel
setting
Auto store
5
Manual store
Language
Prog. No
Manual store
Finetune
Channel setting
Store
This
you to set the selected channel
Factoryallow
reset
skipped or active.
Info
Press the MENU key.
With the cursor, select the Install menu then
Channel setting:
Main Control
Install
6
Channel setting
Language
Channel edit
Country
Channel swap
Auto store
Name edit
Manual store
Channel sort
4
Channel setting
Factory reset
Indicate your choice by
keys and validate with
key.
• Channel edit: it allows you to select channel
for edit.
• Channel swap: This switches the selected
channel to the destination channel.
• Name edit: If required, you can give a name to
the programmes and external connectors. Use
the
keys to move around the name display
area (6 characters) and the
keys to select
the characters. When the name has been entered,
use the key to exit. The name is stored.
• Channel sort: This arranges all the available
channels by numberical and alphabetical character.
Info
Other settings in the Install menu
Press the MENU key.
Main Control
Picture
Sound
4
Install
6
Language
Country
Features
Auto store
Install
Manual store
Some transmitters or cable networks broadcast their
own sort parameters (region, language, etc.). In this
case, indicate your choice using the
keys and
validate with .To quit or interrupt the search, press
MENU. If no picture is found, consult the possible
solutions (p.15).
Channel setting
Factory reset
Info
Indicate your choice by
with key.
• Auto Store: to start automatic search for all
programmes available in your region. If the transmitter or cable network sends the automatic sort
signal, the programmes will be numbered
correctly. If this is not the case, you need to use
the Channel setting menu to renumber the
programmes.
keys and validate
To quit the menus, press MENU.
• Language: to change the display language
for the menus.
• Country: to select your country
(GB for Great Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your
country does not appear in the list, select “...”
8
Downloaded From TV-Manual.com Manuals
Picture settings
Press the MENU then . The Picture menu
is displayed.
Main Control
4
Picture
Picture
Smart picture
Sound
Contrast
Features
Brightness
Install
Color
8
Sharpness
Tint
Color temp
Picture format
Info
Use the
keys to select or adjust a setting
and validate with .
Main Control
4
Sound
4
To Picture
quit the menus, press
MENU.
Smart sound
Sound
Main Control
4
Settings
Picture
Features
Picture
Incredible
surround
Smart picture
Install
Sound
AVL
Contrast
Features
Brightness
Install
Color
8
Description of the settings:
• Smart picture: there are five modes of Smart
picture including Personal, Rich, Nature, Soft, or
Multimedia.
• Brightness: this changes picture brilliance.
• Contrast: this changes the difference between
the light and dark tones.
• Color: this changes the intensity of the color.
• Sharpness: this changes the picture definition.
• Tint: this changes the picture color to mix or
hue.
• Color temp: this changes the color
rendering: Cool (bluer), Normal (balanced), or
Warm (redder).
• Picture format: Adjust to change the screen
format to match the type of program you are
watching. Please refer to p.11 for detail.
Sharpness
Tint
Info
Sound
settings
Color temp
Picture format
Info
Press MENU, select Sound ( ) and press .
The Sound menu is displayed:
Main Control
4
Picture
Sound
Main Control
Features
Picture
Install
Sound
Features
4
Timer
4
NR
Sound
Auto lock
Smart sound
Source list
Settings
Features
Incredible surround
Install
AVL
4
Info
Info
Main Control
4
Features
Picture
Timer
Sound
NR
Features
Auto lock
Install
Source list
4
Info
9
Downloaded From TV-Manual.com Manuals
Use the
keys to select or adjust a setting and
validate with .
To quit the menus, press MENU.
Description of the settings:
• Smart sound: you can press the Smart sound
button on the remote control repeatedly to select
Personal, Speech, Music, Movie and
Multimedia.
Personal mode can be set by your preference.
• Setting: this allows you to adjust Treble, Bass, and
Balance of the sound.
• Incredible surround: adds greater depth and
dimension to TV sound. Select from On or Off.
• AVL: this is used to limit increase in sound,
especially on program change or advertising slots.
Main Control
4
Sound
Picture
Smart sound
Sound
Settings
Features
Incredible surround
Install
AVL
4
Features settings
Press
MENU, select Features ( ) and press
Info
.You can adjust:
• Auto lock
You can lock channels to prevent your children
from watching unsuitable content of programmes.
Auto lock offers various Blocking controls:
Main Control
- Lock program: to lock the TV channels by your
choice.
- Change code: to change your access code.
- Clear all: to unlock all locked channels and
programming.
4
Features
Picture
Timer
Sound
NR
Features
Auto lock
Install
Source list
4
Info
• Timer
- Clock: to set the time.
- Start time: to set the time for turning on the TV
automatically.
- Stop time: to set the time for turning off the TV
automatically.
- Sleep timer: to select an automatic standby period.
This list will have values from 0 to 180.
• NR
Attenuates picture noise (snow) in difficult
reception conditions.
Remember that 0000 is the default pin code.
If your access code has been changed by someone
other than you (a child, for example) or you have
forgotten the code, you can always get in by inputting
0711 master pin code.
• Source list
It includes below video input source: TV, CV1, AV 1,
AV 2, PC, EXT and HDMI.
Use the
keys to select or adjust a setting and
validate with .
To quit the menus, press MENU.
10
Downloaded From TV-Manual.com Manuals
Screen format
Press this button to display a list of available
display formats. Available display formats are
determined by the type of signal you are receiving.
To choose the display format you prefer, press the
FORMAT button repeatedly:
For 15PFL4122/ 20PFL4122
4:3
Compress 16:9
HD4:3
For 19PFL4322,
Super Zoom, 4:3, Movie expand 14:9, Movie expand 16:9, 16:9 subtitle and widescreen.
A/CH
4:3
i+
Expand 4:3
AV
16:9 subtitle
Movie expand 14:9
Super zoom
Movie expand 16:9
Widescreen
Super Zoom, Movie expand 14:9, Movie expand
16:9 and 16:9 subtitle makes the picture fill the
screen as much as possible. It is recommended to
press the cursor up/down key to adjust the picture
position on the screen.
Super zoom removes the black bars on the sides
of 4:3 programs with minimal distortion. When
in the Expand 4:3, Compress 16:9, HD 4:3, Movie
expand 14:9, Movie expand 16:9 or Super zoom
picture format, you can make subtitles visible with
the cursor up/down.
Note: Not all screen formats are available when
displaying HD sources.
11
Downloaded From TV-Manual.com Manuals
Using in PC monitor mode
PC mode
Press the AV key on the remote control to display
the Source list.
Use the
keys to select PC mode and
validate with .
- Phase: eliminates the horizontal interfering lines.
- Clock: eliminates the vertical interfering lines.
- Horizontal: adjust the horizontal placement of the
picture.
- Vertical: adjust the vertical placement of the picture.
Sound:
• Smart sound: you can press the Smart sound
button on the remote control repeatedly to select
Personal, Speech, Music, Movie and
Multimedia. Personal mode can be set by your
preference.
• Setting: this allows you to adjust Treble, Bass, and
Balance of the sound.
Using the PC menus
• Incredible surround: adds greater depth and
dimension to TV sound. Select from On or Off.
Press the MENU key to access the specific settings
• AVL: this is used to limit increase in sound,
of the PC monitor mode. Use the cursor to adjust
especially on program change or advertising slots.
them (the settings are automatically saved):
-First of all, you must connect your computer to
VGA jack on the back of TV and adjust to best
resolution.
-For laptop user, please press “Fn” + “CRT/
LCD” buttons to switch the screen to TV.
Features: (not available for 15” / 20”)
Picture:
• Picture format: to choose between full screen
• Color temp: this changes the color rendering:
or 4:3 of the PC screen.
Cool (bluer), Normal (balanced), or Warm
(redder).
Install:
• Brightness: to adjust the brightness.
• Language: to choose your preferred language.
• Contrast: to adjust the contrast.
• Factory reset: to reset the TV to the factory
• Auto adjust: to adjust the best image position and
settings.
phase/clock settings automatically.
• Manual adjust: to manually fine tune the image as
it appears on the screen.
Here is the list of the different PC display resolutions available on your TV:
640 x 480
15” / XGA
19” / WXGA
20” / VGA
V
V
V
720 x 400
V
800 x 600
V
V
1024 x 768
V
V
1280 x 720
V
1280 x 768
V
1360 x 768
V
1440 x 900
V
12
Downloaded From TV-Manual.com Manuals
Connecting peripheral equipment
Source List
Press the AV key on the remote control to display Source List and select TV or
peripheral equipment connected to TV, CVI, AV 1, AV 2, PC, EXT and HDMI.
7
TV
CVI
AV1
AV2
PC
EXT
HDMI
15PFL4122
19PFL4322 / 20PFL4122
HDMI
VGA
AUDIO IN
EXT
PC IN
Bottom Connections
Connect to EXT
Select source EXT
HDMI
HDMI
VGA
Side Connections
Connect to CVI / Component (YPbPr)
Select source CVI
AUDIO IN
EXT
PC IN
VGA
AUDIO IN
EXT
PC IN
DVD Player
Satellite
Set-Top box
DVD Player
Game
Camera
Satellite
Set-Top box
Game
Camera
DVD recoder
DVD Player
Satellite
Set-Top box
DVD Player
Satellite
Connect
to AV
Set-Top box
DVD recoder
VCR recorder
VCR recorder
1, AV 2: Composite (1)+(2), (1)+(4)
Connect to AV 1: S-Video (3)+(2)
1 AV 1 or AV 2
Select source
Connect to earphone
2
1
2 3
3
4
14
DVD Player
Satellite
Set-Top box
DVD Player
Game
Camera
Satellite
Set-Top box
Game
Camera
1
13
HDMI
VGA
AUDIO IN
PC IN
EXT
Downloaded From TV-Manual.com Manuals
HDMI
VGA
AUDIO IN
PC IN
EXT
HDMI
HDMI
VGA
AUDIO IN
PC IN
VGA
AUDIO IN
PC IN
EXT
EXT
DVD Player
Satellite
Set-Top box
Game
Camera
4
1
Connect to HDMI
Select source HDMI
HDMI
VGA
AUDIO IN
PC IN
Connect to PC
Select source PC
EXT
HDMI
VGA
AUDIO IN
PC IN
EXT
HDMI
Analogue PC
VGA
VGA
DVD Player
Satellite
Set-Top box
HD receiver
HDMI input compliance with 480i/p, 576i/p, 720p,
1080i/p signal handling capability.
Fn
LCD/CRT
For laptop user, please press “ Fn “ + “CRT/
LCD” buttons to switch the screen to TV.
14
Downloaded From TV-Manual.com Manuals
Tips
Poor reception
The proximity of mountains or high buildings may be responsible for ghost pictures,
echoing or shadows. In this case, try manually adjusting your picture: see Finetune (p.7)
or modify the orientation of the outside aerial. If you are using an indoor aerial, reception may be difficult in certain conditions. You can improve reception by rotating the
aerial. If the reception remains poor, you will need to use an external aerial.
No picture
Have you connected the aerial socket properly ? Have you chosen the right system? (p.7).
Poorly connected euroconnector cables or aerial sockets are often the cause of picture
or sound problems (sometimes the connectors can become half disconnected if the TV
set is moved or turned). Check all connections.
No sound
If on certain channels you receive a picture but no sound, this means that you do not
have the correct TV system. Modify the System setting (p.7). The amplifier connected to
the TV does not deliver any sound? Check that you have not confused the audio output
with the audio input.
How to switch
TV / PC mode ?
Press AV key on remote control and select PC mode in Source List. (p.12)
First of all, you must connect your computer to VGA jack on the back of TV and adjust
to best resolution.
For laptop user, please press “Fn” + “CRT/LCD” buttons to switch the screen to TV.
PC mode don’t
work ?
Check that you have configured the computer on a compatible display
resolution (see p.12).
Remote control
The TV set does not react to the remote control; the indicator on the set no longer
flashes when you use the remote control? Replace the battery.
Standby
If the set receives no signal for 30 mins, it automatically goes into standby mode. To save
power, your set is fitted with components that give it a very low power consumption
when in standby mode (less than 1 W).
Cleaning the set
Only use a clean, soft and lint-free cloth to clean the screen and the casing of your set.
Do not use alcohol-based or solvent-based products.
Still no results?
Disconnect the mains plug of the TV for 30 seconds then reconnect it. If your TV set
breaks down, never attempt to repair it yourself: contact your dealer’s after-sales
service.
Glossary
VGA (Video Graphics Array): a common standard graphics display system for PCs.
RGB signals : These are the three video signals,
Red Green Blue, which make up the picture.
Using these signals improves picture quality.
S-VHS Signals: These are 2 separate Y/C video
signals from the S-VHS and Hi-8 recording standards.The luminance signals Y (black andwhite)
and chrominance signals C (colour) are recorded
separately on the tape.This provides better
picture quality than with standard video(VHS and
8 mm) where the Y/C signals are combined to
provide only one video signal.
15
Downloaded From TV-Manual.com Manuals
NICAM sound: Process by which digital sound can
be transmitted.
System: Television pictures are not broadcast in
the same way in all countries. There are different
standards: BG, DK, I, and L L’. The System setting
(p.7) is used to select these different standards. This
is not to be confused with PAL or SECAM colour
coding. Pal is used in most countries in Europe,
Secam in France, Russia and most African countries.
The United States and Japan use a different system
called NTSC. The input EXT is used to read NTSC
coded recordings.
16:9: Refers to the ration between the length and
height of the screen. Wide screen televisions have
a ration of 16/9, conventional screen TV sets have a
ration of 4/3.