ViewSonic VFM1036W-51E User guide

®
ViewSonic
VFM1036W
Digital Photo Frame
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guia do usuário
- Käyttöopas
- Руководство пользователя
- Kullanιcι kιlavuzu
- Οδηγός χρηστών
Model No.: VS13474
Compliance Information
FCC Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Warning: You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
For Canada
•
This Class B digital apparatus complies with Canadian ICES-003.
•
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CE Conformity for European Countries
The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive
2006/95/EC.
Following information is only for EU-member states:
The mark is in compliance with the Waste Electrical and Electronic Equipment Directive
2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment including any spent or
discarded batteries or accumulators as unsorted municipal waste, but use the return and collection
systems available.
If the batteries, accumulators and button cells included with this equipment, display the chemical
symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than
0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.
ViewSonic
i
VFM1036W
Declaration of RoHS Compliance
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the
European Parliament and the Council on restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum
concentration values issued by the European Technical Adaptation Committee (TAC) as shown
below:
Proposed Maximum
Concentration
Actual Concentration
Lead (Pb)
0.1%
< 0.1%
Mercury (Hg)
0.1%
< 0.1%
Cadmium (Cd)
0.01%
< 0.01%
Hexavalent Chromium (Cr6+)
0.1%
< 0.1%
Polybrominated biphenyls (PBB)
0.1%
< 0.1%
Polybrominated diphenyl ethers (PBDE)
0.1%
< 0.1%
Substance
Certain components of products as stated above are exempted under the Annex of the RoHS
Directives as noted below:
Examples of exempted components are:
1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not
specifically mentioned in the Annex of RoHS Directive.
2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic
ceramic parts (e.g. piezoelectronic devices).
3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more
lead).
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing
up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.
ViewSonic
ii
VFM1036W
Copyright Information
Copyright© ViewSonic Corporation, 2010. All rights reserved.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks
of ViewSonic Corporation.
Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from furnishing
this material, or the performance or use of this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any
purpose without prior written permission from ViewSonic Corporation.
For Your Records
Product Name:
VFM1036W
ViewSonic Digital Photo Frame
Model Number:
VS13474
Document Number:
VFM1036W_UG_ENG Rev. 1B 10-10-10
Serial Number:
____________________________________
____________________________________
Purchase Date:
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank you
for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/
Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx
ViewSonic
iii
VFM1036W
Table of Contents
Table of Contents…………………………………………..………..…………1
Important Safety Precautions............................................................................2
Cleaning the LCD Screen………………………………………………….2
Cleaning the Digital Picture Frame……………………………………….2
What’s in the Box……………………………………………………………..2
Identifying the Parts………………………………………..……………..3
Replacing Remote Control Battery……………………….……………...4
Product Specification……………………………………….…………………4
Specification………………………………………………………………..4
Using the Digital Picture Frame…………………………….………………..5
Select Mode…………………………………………..……………………5
Card Selection………………………………………..…………………...5
Photo………………………………………………………………………..6
Music……………………………………………………………………….6
Video………………………………………………………………………..7
File Management…………………………………………………………..7
Time…………………………………………………….………………….8
Frequently Asked Questions…………………………….…………………...9
ViewSonic
1
VFM1036W
Important Safety Precautions
Always follow these basic safety precautions when using your Digital Picture Frame. This
will reduce the risk of fire, electric shock, and injury.
Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or
moisture.
Warning: To prevent the risk of electric shock, do not remove the cover. There are no
user-serviceable parts inside. Refer all servicing to qualified personnel.
l The Digital Picture Frame is for indoor use only.
l Unplug the Digital Picture Frame before performing care and maintenance.
l Do not clock the ventilation holes on the back of the Digital Picture Frame at any time.
l Keep your Digital Picture Frame out of direct sunlight and heat sources.
l Protect the power cord. Route power cords so that they are not likely to be walked on
or pinched by items places on or against them. Pay particular attention to the point
where the cord attaches to the Digital Picture Frame.
l Only use the AC adapter included with the Digital Picture Frame. Using any other
power adapter will void your warranty.
l Unplug the power cord from the outlet when the unit is not in use.
Cleaning the LCD Screen
Treat the screen gently.
To clean fingerprints or dust from the LCD screen, it is recommended to use a soft,
non-abrasive cloth such as a camera lens cloth to clean the LCD screen.
If you use a commercial LCD cleaning kit, do not apply the cleaning liquid directly to the
LCD screen. Clean the LCD screen with cleaning cloth moistened with the liquid.
Cleaning the Digital Picture Frame
Clean the outer surface of the Digital Picture Frame (excluding the screen) with a soft cloth
dampened with water.
What’s In the Box
Digital Picture Frame
Power Adapter
Remote Control
USB Cable
Quick Start Guide
User’s Manual
ViewSonic
2
VFM1036W
Identifying the Parts
Function Buttons
Mini USB
USB host
4-in-1 card reader
Speaker
DC in jack
Zoom In
SETUP
EXIT
POWER
ROTATION
Volume Control
SELECT
Direction Control
SLIDESHOW
ENTER
STOP
ViewSonic
3
VFM1036W
Replacing the Remote Control Battery
If the remote control stops working or works improperly, replace the battery (CR2025 lithium
battery) with a new one.
1. Pull out the battery tray.
2. Remove the old battery from the tray and put a new battery with “+” facing up.
3. Push the battery tray back in.
Warning
Battery may explode if mistreated. Do not recharge,
disassemble or dispose of in fire
Notes
l When the lithium battery becomes weak, the operating distance of the Remote Control may
shorten, or the Remote Control may not function properly. In this case, replace the battery with a
CR2025 lithium battery. Use of another battery may present a risk of fire or explosion.
l Dispose the used batteries as specified by the local authorities.
l Do not leave the Remote Control in a very hot and humid place.
l Incorrect use of the battery may cause leaking and corrosion.
- When the Remote control will not be used for a long period of time, remove the battery from
the remote control to prevent leaking and corrosion.
- Incorrectly inserting, shorting, dismantling, or heating the battery, or throwing it into a fire
may cause the battery to rupture and leak.
Product Specification
Specification
Product
Resolution
Memory Card Formats
Image Formats
Audio Formats
Video Formats
USB Ports
Power Input
Power Output
Internal Speakers
Certification
ViewSonic
10w Digital P hoto Frame
1024 x600 Pixel
Secure Digital™, Multi-Media Card™, Memory Stick™,
Memory Stick Pro™, Memory Stick Duo™, xD Picture
CardTM and USB flash drives
JPEG, BMP, PNG, GIF, TIFF
MP3
MPEG1/4, M-JPEG, AVI, Divx
USB 2.0 (Host) x 1, mini-USB x 1
AC 100V~240V, 50~60Hz
DV 5V / 2A
0.5W x 2
CE / FCC / RoHS
4
VFM1036W
Using the Digital Picture Frame
After the Digital Picture Frame is turned on, the slide show starts automatically after 2
seconds. Press EXIT button to Select Mode screen.
(Your icons may look slightly different depending on models.)
l Select Mode
In Select Mode, you will see the screen below. There are 6 options: Card Selection, Photo,
Music, Video, File Management, and Time. Please highlight the desired mode and press
ENTER.
Card Photo Music Video File
Time
l Card Selection
If there is no memory card inserted, the “Internal Memory” icon will be highlighted
automatically. When the memory card is inserted, eg. SD card, the SD icon will be
highlighted; if the MS card is inserted, the MS icon will be highlighted. The card also can
be selected by pressing ENTER on the Card Selection icon.
ViewSonic
5
VFM1036W
l Photo
n
n
n
By pressing SETUP, the following options are available:
File Sorting, (By time or name) Copy Photo (memory card to internal memory),
Delete Photo (from internal memory), Factory Default, Select Card, Display Image
Size, Magic Window, Slideshow Transition, Slideshow Speed, and Adjust LCD Color.
By pressing ZOOM or ENTER once, the single photo displays.
- Press ENTER to start or pause the slideshow.
- Press ZOOM to zoom in the image.
- Press ROTATE to rotate the image 90° counterclockwise.
- Press SELECT to select or unselect the image(s). The selected images can be
copied or deleted at one time.
l Music
n
n
n
n
In Music, slideshow plays while the music is playing. The music information and
the play time are shown at the right side of the slideshow. The control buttons are
located below.
By pressing SETUP, following options are available:
File Sorting, Copy Music (memory card to internal memory), Delete Music (from
internal memory), Factory Default, Select Card, Audio Playback Repeat, and Set
As Alarm Music.
To show the music file list, move to the most right control button and press
ENTER.
ViewSonic
6
VFM1036W
l Video
n
In Video, the list of video files will be displayed on the left side and the preview of
n
highlighted file will be shown on the right side.
Press ENTER to play the video, RIGHT to forward, LEFT to backward, UP to play
n
n
last video, and DOWN to play next video.
By pressing SETUP, following options are available:
File Sorting, Copy Movie (memory card to internal memory), Delete Movie
(internal memory), Factory Default, Select Card, and Video Playback Repeat.
l File Management
n
n
n
n
n
In File, the file list will be on the left side and the image previews will be shown on
the right side. For video and music files, only the file information will be shown on
the right side.
Press ENTER on video/music files to play the video/music. Press ENTER on image
files to view the image on full screen; press ENTER again to start the slideshow.
Press SELECT to select the files.
By pressing SETUP, following options are available:
Copy Files (memory card to internal memory), Delete Files (internal memory),
Factory Default, and Select Card.
ViewSonic
7
VFM1036W
l Time
n
In Time mode, the slideshow plays on the left side, calendar shows on the right side,
n
n
n
and the time is displayed at the bottom.
When the alarm is set, the red alarm icon shows.
Today’s date will be highlighted in yellow.
Press SETUP to setup alarm, clock, and date, as shown below.
-Set the alarm time duration at the first block. The alarm will be ringing for
every 3, 5, or 10 minutes.
-Set the alarm for once or daily at the second block.
ViewSonic
8
VFM1036W
Frequently Asked Questions
Q: How do I set up my Digital Picture Frame?
A: It is very simple to set you Digital Picture Frame up in just a few minutes. Plug the
power adapter into the Digital Picture Frame and into a standard wall socket. Insert a
memory card into the appropriate card slot on the side of the Digital Picture Frame and
turn it on. Your first slideshow will automatically start to play.
Q: What memory cards can the Digital Picture Frame read?
A: Compatible memory cards include Secure Digital™, Multi-Media Card™, Memory
Stick™, Memory Stick Pro™, Memory Stick Duo™,and xD Picture CardTM.
Q: I have set up the Digital Picture Frame; why didn’t it turn on?
A: The adapter may be not securely connected to the Digital Picture Frame or wall socket,
or the Power Switch may not be on. Please check if the adapter is properly plugged to
the Digital Picture Frame and the wall socket.
Q: I have a memory card in the Digital Picture Frame; why can’t I view my photos?
A: First, check whether the memory card is one of the listed above and the images are one
of the formats listed in the Specification on page 6. Second, turn the Digital Picture
Frame off and make sure that the memory card is facing the correct direction and is
inserted all the way into the card slot and. Third, turn the Digital Picture Frame on; you
should see the Select Mode Screen. Follow the instruction of Card Selection to select
your memory card.
Note: Some digital cameras save images in other formats. Please refer to your camera’s
manual if your photo format is not listed in the Specification.
Q: Why is the picture display slower with some pictures and faster with others?
A: Higher resolution pictures will be loaded slowly. Try to use lower resolution pictures or
down sampling your images. See your camera’s operating manual for details on
downsizing your photos.
Q: Does the Digital Picture Frame support all JPEG files?
A: No. The Digital Picture Frame supports the JPEG files taken by a digital camera. It may
not read all image files downloaded from the Internet or from other graphic applications.
ViewSonic
9
VFM1036W
Customer Support
For technical support or product service, see the table below or contact your reseller.
Note: You will need the product serial number.
Country/
Region
Web Site
Australia/New
Zealand
www.viewsonic.com.au
Canada
www.viewsonic.com
Europe
www.viewsoniceurope.com
www.viewsoniceurope.com/uk/Support/Calldesk.htm
Hong Kong
www.hk.viewsonic.com
T= 852 3102 2900
service@hk.viewsonic.com
India
www.in.viewsonic.com
T= 1800 11 9999
service@in.viewsonic.com
Ireland (Eire)
www.viewsoniceurope.
com/uk/
www.viewsoniceurope.com/uk/
support/call-desk/
service_ie@viewsoniceurope.
com
Korea
www.kr.viewsonic.com
T= 080 333 2131
service@kr.viewsonic.com
Latin America
(Argentina)
www.viewsonic.com/la/
T= 0800-4441185
soporte@viewsonic.com
Latin America
(Chile)
www.viewsonic.com/la/
T=1230-020-7975
soporte@viewsonic.com
Latin America
(Columbia)
www.viewsonic.com/la/
T= 01800-9-157235
soporte@viewsonic.com
Latin America
(Mexico)
www.viewsonic.com/la/
T= 001-8882328722
soporte@viewsonic.com
T=Telephone
F=Fax
AUS=1800 880 818
NZ=0800 008 822
T (Toll-Free)= 1-866-463-4775
T (Toll)= 1-424-233-2533
F= 1-909-468-3757
E-mail
service@au.viewsonic.com
service.ca@viewsonic.com
Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS
Electroser, Av Reforma No. 403Gx39 y 41, 97000 Merida, Yucatan. Tel: 01.999.925.19.16
Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico
Latin America
(Peru)
www.viewsonic.com/la/
T= 0800-54565
soporte@viewsonic.com
Macau
www.hk.viewsonic.com
T= 853 2870 0303
service@hk.viewsonic.com
Middle East
ap.viewsonic.com/me/
Contact your reseller
service@ap.viewsonic.com
Puerto Rico &
Virgin Islands
www.viewsonic.com
T= 1-800-688-6688 (English)
T= 1-866-379-1304 (Spanish)
F= 1-909-468-3757
service.us@viewsonic.com
soporte@viewsonic.com
Singapore/
Malaysia/
Thailand
www.viewsonic.com.sg
T= 65 6461 6044
service@sg.viewsonic.com
South Africa
ap.viewsonic.com/za/
Contact your reseller
service@ap.viewsonic.com
United
Kingdom
www.viewsoniceurope.
com/uk/
www.viewsoniceurope.com/uk/
support/call-desk/
service_gb@
viewsoniceurope.com
United States
www.viewsonic.com
T (Toll-Free)= 1-800-688-6688
T (Toll)= 1-424-233-2530
F= 1-909-468-3757
service.us@viewsonic.com
ViewSonic
10
VFM1036W
Limited Warranty
VIEWSONIC Digital Photo Frame
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship, under normal
use, during the warranty period. If a product proves to be defective in material or workmanship during
the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer
purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Causes external to the product, such as electric power fluctuations or failure.
d. Use of supplies or parts not meeting ViewSonic’s specifications.
e. Normal wear and tear.
f. Any other cause which does not relate to a product defect.
3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static
image is displayed on the product for an extended period of time.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer Support (please
refer to Customer Support page). You will need to provide your product’s serial number.
2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your
name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service
center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
There are no warranties, express or implied, which extend beyond the description contained herein
including the implied warranty of merchantability and fitness for a particular purpose.
Exclusion of damages:
ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be
liable for:
1. Damage to other property caused by any defects in the product, damages based upon inconvenience,
loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill,
interference with business relationships, or other commercial loss, even if advised of the possibility of
such damages.
2. Any other damages, whether incidental, consequential or otherwise.
3. Any claim against the customer by any other party.
4.3: ViewSonic DPF Warranty DPF_LW01 Rev. 1A 06-20-08
ViewSonic
11
VFM1036W