advertisement
▼
Scroll to page 2
of 88
Printer/Scanner Unit Type 2018 Operating Instructions Scanner Reference 1 Network Scanner 2 Preparations for Use as a Network Scanner 3 Setting Originals 4 Sending Scan Files by E-mail 5 Using the Network Delivery Scanner Function 6 Using the Network TWAIN Scanner Function 7 Appendix For safe and correct use of this machine, please be sure to read the Safety Information in the "Copy Reference" before you use it. Introduction This manual describes detailed instructions on the operation and notes about the use of this machine. To get maximum versatility from this machine all operators are requested to read this manual carefully and follow the instructions. Please keep this manual in a handy place near the machine. The scanner function is available when the Printer/Scanner option is installed in the machine. Warning: Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. Two kinds of size notation are employed in this manual. With this machine refer to the inch version. Trademarks • Adobe, PostScript, and Acrobat are trademarks of Adobe Systems Incorporated. • Ethernet is a registered trademark of Xerox Corporation. • Pentium is a registered trademark of Intel Corporation. • MS, Microsoft, and Windows are registered trademarks of Microsoft Corporation. • Other product names used herein are for identification purposes only and might be trademarks of their respective companies. We disclaim any and all rights in those marks. • The product name of Windows® 95 is Microsoft® Windows® 95. • The product name of Windows® 98 is Microsoft® Windows® 98. • The product name of Windows® Me is Microsoft® Windows® Millennium Edition (Windows Me). • The product names of Windows® 2000 are as follows: Microsoft® Windows® 2000 Professional Microsoft® Windows® 2000 Server Microsoft® Windows® 2000 Advanced Server • The product names of Windows® XP are as follows: Microsoft® Windows® XP Home Edition Microsoft® Windows® XP Professional • The product names of Windows ServerTM 2003 are as follows: Microsoft® Windows ServerTM 2003 Standard Edition Microsoft® Windows ServerTM 2003 Enterprise Edition Microsoft® Windows ServerTM 2003 Web Edition • The product names of Windows NT® 4.0 are as follows: Microsoft® Windows NT® Workstation 4.0 Microsoft® Windows NT® Server 4.0 Manuals for This Machine The following manuals describe the operational procedures of this machine. For particular functions, see the relevant parts of the manual. Note ❒ The manuals provided are specific to machine type. ❒ Adobe Acrobat Reader is necessary to view the manuals as a PDF file. ❒ Tow CD-ROMs are provided: • CD-ROM 1 "Operating Instructions for Printer / Scanner" • CD-ROM 2 "Scanner Driver & Document Management Utilities" ❖ General Settings Guide Provides an overview of the machine and describes System Settings (paper trays, Key Operator Tools, etc.), and troubleshooting. Refer to this manual for Address Book procedures such as registering fax numbers, e-mail addresses, and user codes. ❖ Network Guide (PDF file - CD-ROM1) Describes procedures for configuring the machine and computers in a network environment. ❖ Copy Reference Describes operations, functions, and troubleshooting for the machine's copier function. ❖ Facsimile Reference <Basic Features> Describes operations, functions, and troubleshooting for the machine's facsimile function. ❖ Facsimile Reference <Advanced Features> Describes advanced functions and settings for key operators. ❖ Printer Reference 1 Describes system settings and operations for the machine's printer function. ❖ Printer Reference 2 (PDF file - CD-ROM1) Describes operations, functions, and troubleshooting for the machine's printer function. ❖ Scanner Reference (this manual) (PDF file - CD-ROM1) Describes operations, functions, and troubleshooting for the machine's scanner function. i ❖ Manuals for DeskTopBinder V2 Lite DeskTopBinder V2 Lite is a utility included on the CD-ROM labeled "Scanner Driver & Document Management Utilities". • DeskTopBinder V2 Lite Setup Guide (PDF file - CD-ROM2) Describes the installation of DeskTopBinder V2 Lite, and the operating environment for DeskTopBinder V2 Lite in detail. This guide can be displayed from the [Setup] dialog box when DeskTopBinder V2 Lite is installed. • DeskTopBinder V2 Lite Introduction Guide (PDF file - CD-ROM2) Describes operations with DeskTopBinder V2 Lite and provides an overview of its functions. This guide is added to the [Start] menu when DeskTopBinder V2 Lite is installed. • Auto Document Link Guide (PDF file - CD-ROM2) Describes operations and functions of Auto Document Link installed with DeskTopBinder V2 Lite. This guide is added to the [Start] menu when DeskTopBinder V2 Lite is installed. ❖ Manuals for ScanRouter V2 Lite ScanRouter V2 Lite is a utility included on the CD-ROM labeled "Scanner Driver & Document Management Utilities". • ScanRouter V2 Lite Setup Guide (PDF file - CD-ROM2) Describes the installation of ScanRouter V2 Lite, settings, and the operating environment for ScanRouter V2 Lite in detail. This guide can be displayed from the [Setup] dialog box when ScanRouter V2 Lite is installed. • ScanRouter V2 Lite Management Guide (PDF file - CD-ROM2) Describes delivery server management and operations, and provides an overview of ScanRouter V2 Lite functions. This guide is added to the [Start] menu when ScanRouter V2 Lite is installed. ❖ Other manuals • PostScript3 Supplement (PDF file - CD-ROM1) • UNIX Supplement (available from an authorized dealer, or as a PDF file on our Web site) ii TABLE OF CONTENTS Manuals for This Machine ......................................................................................i How to Read This Manual .....................................................................................1 Symbols ..................................................................................................................... 1 Names of Major Options ............................................................................................ 2 1. Network Scanner Outline..................................................................................................................... 3 E-mail ......................................................................................................................... 3 Network Delivery Scanner.......................................................................................... 4 Network TWAIN Scanner ........................................................................................... 5 Control Panel.......................................................................................................... 6 Reading the Display and Using Keys......................................................................... 8 2. Preparations for Use as a Network Scanner Initial Scanner Setup ............................................................................................. 9 Scanner Features....................................................................................................... 9 Scan Settings ........................................................................................................... 12 Destination List Settings........................................................................................... 14 Send Settings........................................................................................................... 14 Installing Software ............................................................................................... 17 Auto Run Program ...................................................................................................17 Software for Using a Network TWAIN Scanner .......................................................19 Software for Using the Network Delivery Scanner Function ....................................20 DeskTopBinder V2 Lite ............................................................................................21 Software Supplied on CD-ROM ............................................................................... 21 3. Setting Originals Placing Originals..................................................................................................27 Placing on the Exposure Glass ................................................................................28 Placing in the Auto Document Feeder ..................................................................... 29 Original Orientation and Scan Area ................................................................... 31 For E-mail and a Network Delivery Scanner ............................................................ 31 For a Network TWAIN Scanner................................................................................33 Scanning Originals in Several Times using the Exposure Glass.................... 34 4. Sending Scan Files by E-mail Preparation for Sending by E-mail ..................................................................... 35 E-mail Screen........................................................................................................... 36 Sending Scan Files by E-mail .............................................................................37 Procedure for Sending by E-mail .............................................................................37 Checking the Status of E-mail ............................................................................49 iii 5. Using the Network Delivery Scanner Function Preparation for Delivering...................................................................................51 Network Delivery Scanner Screen ........................................................................... 52 Delivering Scan Files........................................................................................... 54 Delivery Procedure...................................................................................................54 Checking the Status of Delivery ......................................................................... 64 6. Using the Network TWAIN Scanner Function Preparation for Using the Network TWAIN Scanner.........................................65 Network TWAIN Scanner Screen.............................................................................65 Scanning Originals ..............................................................................................66 Functions of the TWAIN Driver ................................................................................68 7. Appendix Relationship between Resolution and File Size................................................69 When Using as E-mail or Network Delivery Scanner............................................... 69 When Using as a Network TWAIN Scanner.............................................................69 Max. Number of Addresses Which Can Be Specified ...................................... 70 Troubleshooting...................................................................................................71 When Scanning Is Not Performed as Expected.......................................................71 When the Delivery Function Does Not Work............................................................ 71 When an Error Message Appears on the Control Panel ..........................................72 When an Error Message Appears on the Client Computer...................................... 74 Specifications.......................................................................................................77 INDEX......................................................................................................... 78 iv How to Read This Manual Symbols In this manual, the following symbols are used: Important If this instruction is not followed, paper might be misfed, originals might be damaged, or files might be lost. Be sure to read this. Preparation This symbol indicates the prior knowledge or preparations required before operating. Note This symbol indicates precautions for operation or actions to take after misoperation. Limitation This symbol indicates numerical limits, functions that cannot be used together, or conditions in which a particular function cannot be used. Reference This symbol indicates a reference. [ ] Keys that appear on the machine's display panel. [ ] Keys and buttons that appear on the computer's display. { } Keys built into the machine's control panel. { } Keys on the computer's keyboard. 1 Names of Major Options Major options of this machine are referred to as follows in this manual: • Exposure Glass Cover • Auto Document Feeder → ADF • Auto Document Feeder capable of scanning both sides of a sheet → ARDF • Printer/Scanner Unit Type 2018 → printer/scanner controller The following software products are referred to using a general name: • DeskTopBinder V2 Lite and DeskTopBinder V2 Professional → DeskTopBinder V2 Lite/Professional • ScanRouter V2 Lite and ScanRouter V2 Professional (optional) → ScanRouter V2 Lite/Professional 2 1. Network Scanner Outline By installing the printer/scanner controller, the machine can be used as a network scanner. As a network scanner, the machine can send scan files by e-mail, operate as a network delivery scanner, and operate as a network TWAIN scanner. E-mail Scan files that are attached to an e-mail can be sent using the e-mail system through a LAN or the Internet. Reference p.35 “Sending Scan Files by E-mail” AAH008S 1. This machine 3. Client computer Scan files that are attached to an e-mail can be sent to an e-mail server. An e-mail with scan files attached is received from the e-mail server using email software. Check the contents of the file with an application appropriate for the file type. 2. E-mail server An e-mail server is the SMTP server used for an e-mail system. It transfers a received e-mail to a specified destination through a LAN or the Internet. 3 Network Scanner Network Delivery Scanner The machine is used as a delivery scanner with ScanRouter V2 Lite/Professional. Scan files are stored in the delivery server and delivered to the folders of client computers on the same network. 1 Reference p.51 “Using the Network Delivery Scanner Function” Note ❒ When the optional ScanRouter V2 Professional is used, the machine can also deliver scan files using e-mail, and the files can be viewed from a client computer using a Web browser. AAH009S 1. This machine 3. Client computer Scan files are sent to the delivery server. The contents of stored files can be checked in the following ways: 2. Delivery server ScanRouter V2 Lite/Professional is installed in this computer which is used as a delivery server. A received file is delivered to the in-tray of the specified destination. (A in the figure). According to the settings of the intray, the file is stored in the in-tray or in a Windows folder. (B in the figure) 4 • View the file in the in-tray using DeskTopBinder V2 Lite to check the contents. (C in the figure) • Use Auto Document Link to receive the file stored in the in-tray, and check the contents with an application appropriate for the file type. (D in the figure) • Access the Windows folder where the file is stored via the network, and check the contents with an application appropriate for the file type. (E in the figure) Outline Reference For more information about ScanRouter V2 Lite, DeskTopBinder V2 Lite, or Auto Document Link, see p.i “Manuals for This Machine”. 1 Network TWAIN Scanner The scanning function of this machine can be used from a client computer via a network (Ethernet, IEEE 1394 (IP over 1394) [optional], or IEEE 802.11b (Wireless LAN) [optional]). Reference p.65 “Using the Network TWAIN Scanner Function” AAH010S 1. This machine 2. Client computer The scanning function of the machine can be used from a client computer via a network. Originals are scanned using the TWAIN driver for the machine from an application. 5 Network Scanner Control Panel This illustration shows the control panel when options are installed. 1 1 Start Manual Reception Receive File Immediate Trance. Memory Trance. 01 ABC 05 Transmission Stamp 02 DEF 06 03 Scanner 6 7 8 09 Standard YZ Detail Fine 13 Shift PQR 10 @. ___ @. 14 User Tools/ Counter Copy Space Clear Modes On Hook Dial Clear/Stop ABC JKL Main Power DEF Printer On OK VWX Pause/ Redial GHI JKL MNO PRS TUV WXY Start 12 Duplex Original -& 15 1011 12 13 08 STU 11 9 04 GHI 07 5 Cancel MNO Switch RX Mode 4 Search Check Job Destination Destination Information Facsimile Communicating 2 3 Text 16 Combine/ Series Sort Lighter Darker Photo OPER Enter Symbols 14 15 16 17 18 19 20 21 AAH026S 1. {Search Destination}} key 8. Scroll keys Press to search for the destination from the Destination List. Press to check the destinations currently selected. Press to select an item. {U}: scroll upward {T}: scroll downward {V}: scroll right {W}: scroll left 3. {Job Information}} key 9. {User Tools/Counter}} key Press to check the status of sent and delivered e-mail. Press to change default or operation parameters according to requirement. 4. {Scanner}} key 10. {Clear Modes}} key Press to activate the scanner function. Press to clear the current settings. 5. Indicators 11. {Clear/Stop}} key Display errors and machine status. h:Error indicator B:Load Paper indicator D:Add Toner indicator Clear: clears an entered numeric value. Stop: stops scanning. 2. {Check Destination}} key Reference For more information, see Copy Reference. 6. Display Displays operation status and messages. 7. Selection keys Correspond to items on the display. Press to select the corresponding item. 6 12. Main power indicator and On indicator The main power indicator lights when the main power switch is turned on. The On indicator lights when the operation switch is on. 13. Operation switch Press to turn the power on. The On indicator lights. To turn the power off, press again. Note ❒ This key is inactivate during scanning or while setting scanner defaults. Control Panel 14. Quick Dial keys Press to select the registered destination with a single touch, or to enter letters and symbols. 1 Reference For more information, see General Settings Guide. Note ❒ You can register up to 32 destinations using the Quick Dial keys. 15. Quick Dial Flip Plate Flip this plate down to access the Quick Dial keys 01 through 16; flip it up to access keys 17 through 32. 16. {Lighter}} and {Darker}} keys Press to change the image density setting. Select the image density in five increments, Lighter to Darker. 17. {Original}} key Press to select the original type registered with [Type 1(Text):] or [ Type 2(Photo):]. When the original type is selected, the corresponding indicator lights. 18. {Cancel}} key Press to cancel an operation or return to the previous display. 19. {OK}} key Press to set a selected item or an entered numeric value. 20. Number keys Press to enter numeric values. 21. {Start}} key Press to start scanning or sending. 7 Network Scanner Reading the Display and Using Keys This section explains how to read the display and use the selection key. 1 Note ❒ The copy screen is set as the default screen when the machine is turned on. You can change the settings in [ System Settings ]. See General Setting Guide. 4 1 8 Cancel OK 2 3 AAH032S 1. Selection keys 2. {Cancel}} key Correspond to items at the bottom line on the display. Example: The E-mail screen Press to cancel an operation or return to the previous display. • When the instruction “press [ ]” is given in this manual, press the left selection key. • When the instruction “press [Manual]” is given in this manual, press the center selection key. • When the instruction “press [Options]” is given in this manual, press the right selection key. Press to set a selected item or an entered numeric value. 3. {OK}} key 4. Scroll keys Press to move the cursor in each direction, step by step. When the {U},{ {T},{ {V}, or {W} key appears in this manual, press the scroll key of the same direction. 2. Preparations for Use as a Network Scanner To use the machine as a network scanner, you must make settings required for use as a scanner as well as basic settings for use in a network. Reference First, see General Settings Guide for details about how to make basic settings, and then make scanner settings. For more information about settings for sending by e-mail, see Network Guide. Initial Scanner Setup This section explains all required settings and procedures for using the machine as a network scanner. Scanner Features The settings for using the network scanner functions of the machine are listed below. Make the necessary settings. Note ❒ Make settings for the items marked with ❍ if necessary. ❖ Scan Settings For explanations of settings, see p.12 “Scan Settings”. Settings Scan Settings Default Scan Settings Default E-mail Delivery Resolution 200dpi ❍ ❍ Scan Size Auto Detect ❍ ❍ 1 Sided Original ❍ ❍ Off ❍ ❍ ❍ ❍ Original Setting Mixed Orig. Sizes Priority Orig. Orientation Priority Original Type Setting Type 1(Text): Text (Print) ❍ ❍ Type 2(Photo): Photo ❍ ❍ TWAIN Note ❒ [Original Setting] will be effective only when you have installed the optional ADF capable of scanning both sides of a sheet (ARDF). 9 Preparations for Use as a Network Scanner ❖ Destination List Settings For explanations of settings, see p.14 “Destination List Settings”. Settings Destination List Settings 2 Destination List Priority Default E-mail Delivery Delivery Server ❍ ❍ Update Server Dest. List TWAIN ❍ — ❖ Send Settings For explanations of settings, see p.14 “Send Settings”. Settings Send Settings Default E-mail Delivery TWAIN TWAIN Standby Time 10 sec. ❍ ❍ ❍ File Type Priority Multi-page:TIFF ❍ Compression On ❍ ❍ Print&Del. Scanner Journal On ❍ ❍ 2048KB ❍ On (per max. size) ❍ British English ❍ None ❍ Max. E-mail Size Divide & Send E-mail E-mail Informatn. Language Sender's Name Default Setting procedure A Press the {User Tools/Counter}} key. User Tools/ Counter Clear Modes On Hook Dial Pause/ Redial Clear/Stop GHI ABC DEF JKL MNO Start PRS TUV WXY AAH027S 10 Initial Scanner Setup B Select [Scanner Features] using {U} or {T}, and then press the {OK}} key. 2 C Select a menu using {U} or {T}, and then press the {OK}} key. D Select a setting using {U} or {T}, and then press the {OK}} key. Example: TWAIN Standby Time setting E Change the settings. • Select an item using {U} or {T}, and then press the {OK} } key. • Enter numbers using the number keys, and then press the {OK} } key. The “Programmed” message appears, and then the Send Settings screen returns. Note ❒ To cancel changing a setting, press the {Cancel} } key. The setting returns to the previous condition. F Press the {Cancel}} key. The Scanner Features screen reappears. 11 Preparations for Use as a Network Scanner G Repeat steps C to F to make other settings. H Press the {Cancel}} key. The main menu appears. Scan Settings 2 This section explains how to set the defaults for scan settings. The scan settings consist of the following. For the list about settings and defaults, see p.9 “Scanner Features”. ❖ Default Scan Settings Resolution and scan size can be set. • Resolution Select the resolution from 100dpi, 200dpi, 300dpi, 400dpi, or 600dpi. • Scan Size Select the size of the original to be scanned. When [Auto Detect] is selected, the auto detect function of the machine is used to set the original size. When the size is specified, scanning is performed for that size, regardless of the actual size of the original. The following sizes can be selected: 11 × 17S, 81/2 × 14S, 81/2 × 13S, 81/ 2 × 11R, 81 /2 × 11S, 5 1/2 × 81/2R, 51/2 × 81/2S, A3S, A4R, A4S, A5R, A5S, B4 JISS (Japanese Industrial Standard), B5 JISR, B5 JISS, Custom size Note ❒ When [Custom Size] is selected, the dimensions of the scan area (width and height) can be specified. ❒ When selecting [Custom Size] for [Scan Size], see p.13 “Selecting a custom size”. 12 ❖ Original Setting Note ❒ This setting is available only when you have installed the optional ADF capable of scanning both sides of a sheet (ARDF). Set the default for whether originals are one-sided or two-sided and if two-sided, the relationship between those sides. When the originals are always the same, set this for the default to make operation easier. You can select [1 Sided Original], [2 Sided Orig.(T to T )] (Top to Top), or [2 Sided Orig.(T to B )] (Top to Bottom). Reference p.31 “Original Orientation and Scan Area” ❖ Mixed Orig. Sizes Priority This setting determines whether the original size is to be automatically detected when originals of different sizes are inserted in the ADF. You can select [On] or [Off]. Note ❒ If the original size is specified when scanning, this setting is ignored. ❒ When [Off] is selected, [Auto Detect] is selected for [Scan Size], and originals of different sizes are placed in the ADF, the maximum size of the originals is detected as the scan size. Initial Scanner Setup ❖ Orig. Orientation Priority Select the default for original placement orientation. When originals are always positioned the same way, select that orientation as the default to make operation easier. Reference p.31 “Original Orientation and Scan Area” ❖ Original Type Setting Select the original type registered in [Type 1(Text):] or [Type 2(Photo):]. The original type that can be registered is as follows: • Text (Print) For standard originals containing mainly text (for print) • Text (OCR) For standard originals containing mainly text (for OCR) • Text/Photo For originals containing a mixture of text and photographs • Photo For originals containing photographs and other pictures Note ❒ You can register “Text (Print)” or ”Text (OCR)” in [Type 2(Photo):], or “Text/Photo” or ”Photo” in [Type 1(Text):]. ❒ Printer printing is best scanned with Text (Print). Text (OCR) is suitable for higher OCR accuracy. Selecting a custom size When selecting [Custom Size] as the scan size, follow the procedure below. A Select [Custom Size] on the Scan Size screen using the scroll keys, and then press the {OK} } key. 2 B Enter the width of the original using the number keys. Enter the value in [Horiz.], and then press the {OK} } or {#} } key. C Enter the height of the original using the number keys. Enter the value in [Vert.], and then press the {OK} } or {#} } key. The range of possible dimensions for original sizes is as follows: • Original Size Horiz.: 128 - 432 mm(5.1” - 17.0”) Vert.: 105 - 297 mm(4.2” - 11.6”) The “Programmed” message appears, and then the Scan Size screen returns. D Press the {User Tools/Counter}} key. 13 Preparations for Use as a Network Scanner Destination List Settings This section explains how to set the defaults for the destination list displayed. The destination list settings consist of the following. For the list about settings and defaults, see p.9 “Scanner Features”. 2 ❖ Destination List Priority Select a destination list to be displayed when the machine is in the initial state. You can select either [E-mail] or [Delivery Server]. ❖ Update Server Dest. List To update the Delivery Server Destination List, press [Update Server Dest. List]. Ordinarily, the Delivery Server Destination List is automatically updated. This function allows updating at any time. Send Settings This section explains how to set the defaults for sending settings and how the machine switches to the network TWAIN scanner function. The send settings consist of the following. For the list about settings and defaults, see p.9 “Scanner Features”. ❖ TWAIN Standby Time When the machine is being used to send e-mail or functioning as a network delivery scanner, a scanning request to the machine as a TWAIN scanner will switch the machine to the network TWAIN scanner function. This setting determines the delay until the machine switches to the network TWAIN scanner function. 14 • When [Off] is selected, the machine will switch to the network TWAIN scanner function at once. • When [On] is selected, you can enter the delay time with the number keys (3 - 30 seconds). The machine will switch to the network TWAIN scanner function when the time set here passes after the last key operation. ❖ File Type Priority Select whether to send the file of scanned originals using a single page or multiple pages. When sending using multiple pages, select either TIFF or PDF. ❖ Compression This setting determines whether a scan file is to be compressed. Note ❒ The actual time required for file transfer will vary depending on the file size and network load. ❒ Compression reduces the time required for transferring the scan file. ❖ Print&Del. Scanner Journal Select whether to print the Scanner Journal automatically when the number of delivered e-mails reaches 50. Important ❒ When the main power switch is turned off, all records are deleted. Initial Scanner Setup Note ❒ When [On] is selected, all records are deleted after printing. When [Off] is selected, records that exceed the limit are automatically deleted from the oldest records. ❖ Max. E-mail Size Select whether the size of an e-mail with a scan file attached is limited or not. When [On] is selected, enter the size limit (64 - 8580 KB) with the number keys. Note ❒ When the SMTP limits the size, match that setting. ❖ Divide&Send Mail This function is effective only when [On] is selected for [Max. Email Size]. When an e-mail with an attached file exceeds the size specified in [Max. E-mail Size], select whether or not to divide the file and send using more than one e-mail. Select either [On (per page)], [On (per max. size)], or [Off]. When [On (per max. size)] is selected, enter the maximum number of divisions (2-130) with the number keys. Note ❒ When [Multi-page:TIFF] or [Multipage:PDF] is selected for [File Type Priority], an attached scan file will not be divided even if [On (per page)] is selected. ❒ When [On (per max. size)] is selected, some received files may not be able to be restored, depending on the type of e-mail software. ❒ When [Off] is selected, the email is not sent if its size exceeds the limit, and an error message appears. The scan file is discarded. ❒ Set the maximum e-mail size within the capacity of the SMTP server. 2 ❖ E-mail Informatn. Language Select a language for E-mail Information Language for message, date, key operator's e-mail address to be sent. Select one of the following 20 languages: British English, American English, German, French, Italian, Spanish, Dutch, Portuguese, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian, Danish, Japanese, Simplified Chinese, Traditional Chinese, Russian, and Hangul. Note ❒ “E-mail Information Language” is as follows (Example: When [British English] is selected): “This E-mail was sent from. ”, “Scan Date”, and “Queries to:”. These messages cannot be changed. ❖ Sender's Name Default Select whether to register an administrator as a sender or to specify a sender each time e-mail is sent. If the key operator code has been set, enter the code with the number keys, and then press the {OK} } key. • Select [None] to specify the sender each time. • Select [Key Op's E-mail Address] to specify an administrator as the sender. 15 Preparations for Use as a Network Scanner Important ❒ It is recommended that a sender's password be set to prevent the sender's name from being misused. ❒ When [On] is selected for [Key Operator Code] in [Key Operator Tools] of [System Settings] and [On: Partial] is set for the range, enter the key operator code when [Sender's Name Default] in [Send Settings] of [Scanner Features] is selected. For more information about System Settings, see General Settings Guide. 2 16 Installing Software Installing Software The machine comes with three CD-ROMs containing various software. The CD-ROM labeled“Scanner Driver & Document Management Utilities” contains the necessary software to use the machine as a network scanner. The CDROM labeled “Printer Driver & Utilities” contains the necessary software to use the machine as a printer. This section explains the software to use the machine as a network scanner. 2 Auto Run Program When the CD-ROM is inserted into a client computer in Windows 95/98/Me/2000/XP, or Windows NT 4.0, the installer starts automatically (Auto Run) to install the TWAIN driver and various software. Note ❒ Auto Run might not automatically work with certain operating system settings. In this case, launch “Set up.exe” located in the CD-ROM root directory. ❒ If you want to install the software without using Auto Run, hold down the {Shift} } key while inserting the CD-ROM. Keep the {Shift} } key held down until the client computer has finished accessing the CD-ROM. ❒ If [Cancel] is pressed during installation, the installation will be stopped and all the remaining software will not be installed. If [Cancel] has been pressed, reinstall the remaining software after restarting the client computer. Limitation ❒ For installation in Windows 2000/XP, or Windows NT 4.0, log in as a member of the administrators group. 17 Preparations for Use as a Network Scanner The installing sequence using Auto Run is as follows. Installation Sequence Insert the CD-ROM. 2 TWAIN Driver Ver.3 TWAIN Driver The installer starts up. ScanRouter V2 Lite Select the software. ScanRouter V2 Lite ScanRouter V2 Administration Utility Install all at once, or select and install individually. DeskTopBinder V2 Lite The installation complete message is displayed. DeskTopBinder V2 Lite Acrobat Reader Restart your PC. Acrobat Reader ZHSY070E For information about the software that can be installed by Auto Run, see p.21 “Software Supplied on CD-ROM”. 18 Installing Software Software for Using a Network TWAIN Scanner To use the machine as a network TWAIN scanner, it is essential to install the TWAIN driver. If you do not have applications that work with TWAIN, it is necessary to also install DeskTopBinder V2 Lite. For information about the installation of DeskTopBinder V2 Lite, see p.21 “DeskTopBinder V2 Lite”. 2 Preparation Before installation, check the operating environment for the TWAIN driver. See p.21 “Type2018 TWAIN Driver”. Using Windows 95/98/Me/2000/XP, or Windows NT 4.0 Install the TWAIN driver using Auto Run. A Start Windows, and then insert the supplied CD-ROM labeled “Scanner Driver & Document Management Utilities” into the CD-ROM drive of the client computer. The CD-ROM Launcher screen appears. ❒ After the installation is complete, the “Type2018 TWAIN V3” folder is in the “Program” folder on the Start menu. Help can be displayed from here. ❒ Be sure to read“Readme.txt”before use. Reference If the installer does not start automatically, see p.17 “Auto Run Program”. B Click [TWAIN Driver]. The Software Setup screen appears. C The installer of the TWAIN driver starts. Follow the instructions on the screen. Note ❒ When the installation is complete, a message to prompt you to restart the client computer may appear. In this case, restart the client computer. 19 Preparations for Use as a Network Scanner Software for Using the Network Delivery Scanner Function To use the machine as a network delivery scanner, it is essential to install ScanRouter V2 Lite on the delivery server. To check an in-tray or retrieve files, it is necessary to install DeskTopBinder V2 Lite on the client computer. Use Auto Run for installation. 2 Preparation Before installation, check the system requirements for the software. See p.21 “Software Supplied on CD-ROM”. A Start Windows, and then insert the supplied CD-ROM labeled “Scanner Driver & Document Management Utilities” into the CD-ROM drive of the client computer. The CD-ROM Launcher screen appears. B Click the key of the software to be installed. • Click [ScanRouter V2 Lite], and then the ScanRouter V2 Lite Setup screen appears. • Click [DeskTopBinder V2 Lite], and then the DeskTopBinder V2 Lite Setup screen appears. C Click [ScanRouter V2 Lite] or [DeskTopBinder V2 Lite]. The installer of the software starts. Follow the instructions on the screen. Reference For information about the subsequent installation procedure, see Setup Guide that can be displayed from the Setup screen of the respective software. 20 Installing Software DeskTopBinder V2 Lite Use Auto Run for installation. Preparation Before installation, check the system requirements for DeskTopBinder V2 Lite. See p.22 “DeskTopBinder V2 Lite”. 2 A Start Windows, and then insert the supplied CD-ROM labeled “Scanner Driver & Document Management Utilities” into the CD-ROM drive of the client computer. The CD-ROM Launcher screen appears. B Click [DeskTopBinder V2 Lite]. The DeskTopBinder V2 Lite Setup screen appears. C Click [DeskTopBinder V2 Lite]. The Installer of the DeskTopBinder V2 Lite starts. Follow the instructions on the screen. Reference For information about the subsequent installation procedure, see Setup Guide that can be displayed from the Setup screen of DeskTopBinder V2 Lite. Software Supplied on CD-ROM List of files CD-ROM Drive Wizard for the TWAIN driver and utilities Drivers Twain TWAIN driver for Windows 95/98/Me/2000/XP, Windows NT 4.0 Utility RouterV2 ScanRouter V2 Lite , ministration Utility DeskV2 Acroread ScanRouter V2 Ad- DeskTopBinder V2 Lite Acrobat Reader Type2018 TWAIN Driver This driver is required to scan an original on the machine. To use the machine as a network TWAIN scanner, this driver must be installed. ❖ File storage folder The files are stored in the following folder on the CD-ROM provided with this machine: \DRIVERS\TWAIN 21 Preparations for Use as a Network Scanner ❖ System requirements Limitation ❒ Under Windows NT with RISC-based processors (MIPS R series, Alpha AXP, or PowerPC), this driver is not available. • Hardware PC/AT compatible • CPU Pentium or faster (Pentium 150 MHz or faster recommended) • Operating system Microsoft Windows 95 (OSR 2 or later) Microsoft Windows 98 Microsoft Windows Millennium Edition Microsoft Windows 2000 Professional Microsoft Windows 2000 Server Microsoft Windows XP Home Edition Microsoft Windows XP Professional Microsoft Windows NT Workstation 4.0 (Service Pack 5 or later) Microsoft Windows NT Server 4.0 (Service Pack 5 or later) • Memory Operating system minimum operation memory + 8 MB (64 MB or more recommended) • Hard disk space 100 MB or more • Display resolution 800 × 600 pixels, 256 colors or higher • Network protocol TCP/IP 2 DeskTopBinder V2 Lite DeskTopBinder V2 Lite is to be installed on the client computers for integration and management of various kinds of files such as scan files, files created with applications, and existing files. This software allows you to use various functions for scan files stored in the Document Server, e.g., viewing stored files. Also, with ScanRouter V2 Lite, you can view the files stored in in-trays of the delivery server or use other functions for stored files. Reference See DeskTopBinder V2 Lite Help or the manuals for DeskTopBinder V2 Lite. ❖ File storage folder The files are stored in the following folder on the CD-ROM provided with this machine: \UTILITY\DESKV2 22 Installing Software ❖ System requirements • Hardware PC/AT compatible • CPU Pentium 133 MHz or faster (Pentium II 266 MHz or faster recommended) • Operating system Microsoft Windows 95 (OSR 2 or later) Microsoft Windows 98 Microsoft Windows Millennium Edition Microsoft Windows 2000 Professional (Service Pack 1 or later) Microsoft Windows 2000 Server (Service Pack 1 or later) Microsoft Windows XP Home Edition Microsoft Windows XP Professional Microsoft Windows Server 2003 Standard Edition Microsoft Windows Server 2003 Enterprise Edition Microsoft Windows Server 2003 Web Edition Microsoft Windows NT Workstation 4.0 (Service Pack 5 or later) Microsoft Windows NT Server 4.0 (Service Pack 5 or later) • Memory 48 MB or more (128 MB or more recommended) • Hard disk space 50 MB or more (200 MB or more recommended) • Display resolution 800 × 600 pixels, 64K colors or higher • Network protocol TCP/IP 2 ❖ Software installed with DeskTopBinder V2 Lite • Auto Document Link Auto Document Link on the client computer monitors in-trays of the delivery server. In addition, the files delivered to in-trays can be retrieved or notification of the arrival of a file can be received at the client computer with this software. • Function Palette Function Palette allows you to use functions such as the network TWAIN scanner, printing, printing preview, sending files by e-mail, or sending faxes without starting DeskTopBinder V2 Lite. You must make settings in advance in the [Extended Features...] to use Function Palette. See the DeskTopBinder V2/Lt manuals for more information. • Extended Features Wizard You can make settings equivalent to the settings made with [Extended Features...] of the [Tools] menu with Extended Features Wizard. See the DeskTopBinder V2/Lt manuals for more information. 23 Preparations for Use as a Network Scanner ScanRouter V2 Lite ScanRouter V2 Lite is to be installed on the delivery server. Scan files can be sorted in the delivery server, stored in specified in-trays, or saved in folders of client computers on the same network. Reference See ScanRouter V2 Lite Help or the manuals for ScanRouter V2 Lite. 2 ❖ File storage folder The files are stored in the following folder on the CD-ROM provided with this machine: \UTILITY\ROUTERV2 ❖ System requirements Limitation ❒ When installing the software in Windows NT Server or Windows 2000 Server, a stand-alone server must be used. Do not use the primary domain controller or backup domain controller. ❒ If you install this software in an operating system, such as Windows NT Workstation and Windows 2000 Professional, in which a client server is not permitted to be used in a network, you may violate the license agreement of Microsoft Corporation. • Hardware PC/AT compatible • CPU Pentium 200 MHz or faster (Pentium II 350 MHz or faster recommended) • Operating system Microsoft Windows 95 (OSR 2 or later) Microsoft Windows 98 Microsoft Windows Millennium Edition Microsoft Windows 2000 Professional (Service Pack 1 or later) Microsoft Windows 2000 Server (Service Pack 1 or later) Microsoft Windows XP Home Edition Microsoft Windows XP Professional Microsoft Windows NT Workstation 4.0 (Service Pack 5 or later) Microsoft Windows NT Server 4.0 (Service Pack 5 or later) • Memory 64 MB or more (128 MB or more recommended) • Hard disk space Minimum free space required for installing: 200 MB 24 Note ❒ In addition to the space required for installation, the hard disk should have at least 500 MB of free space for files. • Network protocol TCP/IP Installing Software ❖ Software installed with ScanRouter V2 Lite • ScanRouter V2 Administration Utility ScanRouter V2 Administration Utility manages the delivery system run by ScanRouter V2 Lite. You can register destination and sender information for the scan files in the delivery server. In addition, you can perform maintenance for free disk space monitoring, error log recording, and other features of the delivery server. 2 Note ❒ ScanRouter V2 Administration Utility can be installed not only on the delivery server but also on client computers. To install it, click [ScanRouter V2 Administration Utility] on the ScanRouter V2 Lite Setup screen. 25 Preparations for Use as a Network Scanner 2 26 3. Setting Originals This chapter explains the procedure for placing originals on the exposure glass and in the ADF, and setting the original scan area and orientation according to the placement method. To correctly display the top/bottom orientation of the scanned original on a client computer, the placement of the original and the settings made on the control panel and scanner driver must match. Placing Originals There are two orientations for placing the original. See the table below. Note ❒ Normally, an original is or , but in the table below, a square original is used to make original orientation easy to understand. If the actual shape of the original is different, the combination of original orientation and the orientation specified on the control panel or scanner driver does not change. ❖ Specifying original orientation and setting originals An original to be scanned Exposure glass ADF Decide the placement method. Place the original. (There are two original orientations.) Place the original so that the top edge touches the top left of the exposure glass. Place the Place the top Place the edge of the original so original so original first. that the top that the top edge touches edge touches the back of the rear of the exposure the ADF. glass. 27 Setting Originals When scanning using the e-mail function or the delivery scanner function Specify the orien(Specified on the contation. trol panel screen) When scanning using the TWAIN scanner function (Specified in the Scanner Control dialog box) 3 The original displayed on a computer Placing on the Exposure Glass Originals which do not fit into the ADF, such as sheets with glued-on parts, books, etc., can be placed directly on the exposure glass for scanning. Note ❒ For information about the originals which can be placed on the exposure glass, see Copy Reference. B Place the original on the exposure glass with the side to be scanned facing down. Align the original with the back left corner mark. There are two original orientations. ❖ When placing the original so that the top edge touches the rear of the exposure glass A Lift the exposure glass cover or the ADF. Note ❒ Lift the exposure glass cover or ADF more than 30 degrees. The opening/closing action triggers the automatic original size detection process. 28 AAH004S 1. Positioning mark Placing Originals ❖ When placing the original so that the top edge touches the top left of the exposure glass When using the machine as a network TWAIN scanner, this orientation is the standard setting for the TWAIN driver. Normally, use this orientation for placing originals. AAH005S 1. Positioning mark C Lower the exposure glass cover or the ADF. D Select the original orientation ac- cording to the orientation of the placed original. Reference p.27 “Specifying original orientation and setting originals” Proceed to p.31 “Original Orientation and Scan Area”. Placing in the Auto Document Feeder The ADF allows you to place multiple originals at one time. Originals placed in the ADF can be scanned on one side or both sides. Note ❒ The duplex function is available only when you have installed the optional ADF capable of scanning both sides of a sheet (ARDF). 3 ❖ Originals that can and cannot be placed in the ADF For information about the originals that can and cannot be placed in the ADF, see Copy Reference. Attempting to use unsuitable originals in the ADF can lead to a misfeed and damage to the originals. Place such originals directly on the exposure glass. Important ❒ For information about original sizes that can be detected automatically and notes on placing originals in the ADF, see Copy Reference. A Adjust the original guide to match the size of the originals. B Place the originals with the side to be scanned facing up. (For originals which are to be scanned on both sides, the first side should face up.) There are two orientations. 29 Setting Originals ❖ When placing the originals so that the top edges touch the back of the ADF Note ❒ Originals of the same width and different length can be placed at the same time. Place the originals as shown: 3 AAH022S AAH006S ❖ When placing the top edges of the originals first When using the machine as a network TWAIN scanner, this orientation is the standard setting for the TWAIN driver. Normally, use this orientation for placing originals. 1. ADF placement orientation 2. Height Reference p.32 “Mixed size selection” ❒ Originals are scanned in the inserted order, starting with the topmost page. C Select the original orientation according to the orientation of the placed originals. Reference p.27 “Specifying original orientation and setting originals” Proceed to p.31 “Original Orientation and Scan Area”. AAH007S 30 Original Orientation and Scan Area Original Orientation and Scan Area Note ❒ The difference between scanning with the TWAIN scanner function and the e-mail function or the network delivery scanner function is shown in the following table. Auto Detect Non-Mixed Original Sizes TWAIN Scanner E-mail/Network Delivery Scanner A whole batch of originals is scanned using the size of the first original. Auto detection is used to determine the size of each original placed on the exposure glass. A batch of originals placed in the ADF is scanned using the size of the largest original placed. TWAIN Scanner E-mail/Network Delivery Scanner Size Specification Auto Detect Mixed Original Sizes To correctly display the top/bottom orientation of a scanned original on a client computer, original orientation must be set when placing the original. When using the e-mail function or the network delivery scanner function, settings are made on the control panel of the machine. When using the machine as a network TWAIN scanner, settings are made with the TWAIN driver. Auto detection is used to determine the size of each original. 3 When an original is smaller than the specified size, a blank space appears in the resulting image. For E-mail and a Network Delivery Scanner A To make settings for original orientation, one-sided/two-sided combination, and mixed original sizes, press [Options]. Note ❒ The default can be changed using the initial scan settings [Original Setting], [Mixed Orig. Sizes Priority], and [Orig. Orientation Priority]. See p.12 “Scan Settings”. 31 Setting Originals ❒ The duplex function is available only when you have installed the optional ADF capable of scanning both sides of a sheet (ARDF). Orientation selection A Select [Original Orientation] using {U} or {T}, and then press the {OK} } key. 3 B Select the icon for the same orientation as the actual orientation of the original, [ ] or [ ], and then press the {OK} } key. B When scanning one-sided originals, select [1 Sided Original] using {U} or {T}, and then press the {OK} } key. When scanning two-sided originals, select [2 Sided Orig.(T to T )] or [2 Sided Orig.(T to B )] using {U} or {T} according to the binding side of the original, and then press the {OK} } key. Top to top original: RS Top to bottom original: R S R S R S The “Accepted ” message appears, and then the Send Options screen returns. The “ Accepted” message appears, and then the Send Option screen returns. One-sided original/Two-sided original selection A Select [Original Setting] using {U} or {T}, and then press the {OK} } key. 32 Mixed size selection A Select [Mixed Sizes] using {U} or {T}, and then press the {OK} } key. Original Orientation and Scan Area B When originals of the same width and different length are placed, select [On] using {U} or {T}, and then press the {OK} } key. For a Network TWAIN Scanner A Open the scanner properties dialog box. Reference p.66 “Scanning Originals” B Select the position from the [Document] list in the [Document] area. The “ Accepted” message appears, and then the Send Options screen returns. Note ❒ When [Off] is selected and [Auto Detect] is selected for [Scan Size], if originals of different sizes are placed in the ADF, the size of the largest original placed is detected and set as the scan size. For originals smaller than this size, a blank space will appear in the resulting image. C Press the {Cancel} } key. The E-mail screen appears. C Select [ / ] or [ the [Orientation:] list. / 3 ] in Reference p.27 “Specifying original orientation and setting originals” D When the originals are placed in the ADF, select [Simplex] or [Duplex] in the [Side:] list. Note ❒ The duplex function is available only when you have installed the optional ADF capable of scanning both sides of a sheet (ARDF). ❒ If originals of different sizes are placed in the ADF, specify the original size or detection method in the [Size:] box. If [Auto detection (Uni-size)] is selected, all originals are scanned using the size of the first page. If [Auto detection (Multi-size)] is selected, all originals are scanned according to their own width. For both Uni-size and Multi-size, all originals are scanned using their own length. 33 Setting Originals Scanning Originals in Several Times using the Exposure Glass A Place the originals. Reference p.27 “Placing Originals” Note ❒ Originals are scanned in order. Place them from the first page. 3 B Make settings for scanning area and original orientation. Reference p.31 “Original Orientation and Scan Area” C Make settings for sending by email or delivering. Reference p.37 “Procedure for Sending by E-mail” p.54 “Delivery Procedure” D Press the {Start}} key. E When there are additional originals to scan, place them and press the {Start} } key. Repeat this step until all originals are scanned. 34 F After all originals are scanned, press the {#} } key. Sending will start. 4. Sending Scan Files by E-mail Scan files can be sent from this machine to a specified destination using e-mail. This chapter explains the preparation for sending scan files by e-mail, various display screens, procedures for sending, and how to check the sending result when this function is used. Preparation for Sending by E-mail To send by e-mail system, the preparation described below is required. Note ❒ Set up an e-mail server on the network in advance. For information about setting up an e-mail server, see the instruction manuals of the e-mail server to be used and the software to be installed. 1 Connect to Network 2 Make System Settings Connect the machine to the network with an Ethernet cable or IEEE 1394 (optional) cable, or use Wireless LAN (optional). See Network Guide. Make the network settings, settings for sending e-mail such as for the SMTP server and TCP/IP, and the destination (sender) settings in System Settings. See Network Guide and General Settings Guide. 3 Make Scanner Settings Make settings for sending e-mail such as the file type priority and sender's default. See p.14 “Send Settings”. 35 Sending Scan Files by E-mail E-mail Screen These screens are shown when using the machine for e-mail . ❖ Main display 2 1 4 3 4 5 AAH018S ❖ When a destination is selected. 6 1. E-mail icon ( ) Indicates that the E-mail screen is displayed. 2. Destination field Displays the selected destination. If multiple destinations are selected, the destinations are displayed in the order they were selected by pressing {U} or {T}. Note ❒ Press the {Check Destination} } key to check the selected destination. 3. [ ]E-mail/Network Delivery Scanner Press to switch between the e-mail function and the network delivery scanner function. 36 7 5 AAH025S 4. [Manual] When specifying a destination that is not registered, press [Manual], and then enter the e-mail address of the destination using the Quick Dial keys. 5. [Options] Press to make the scan settings such as resolution or scan size, the sender, the subject of the e-mail to be sent, and the file type of the scan file attached to the e-mail if necessary. 6. [Add Dest] When selecting multiple destinations after a manual entry of an e-mail address, press [Add Dest], and then enter the e-mail address of the destination. 7. [EditDest] When changing an e-mail address that has been entered, press [EditDest], and then enter the new e-mail address. Sending Scan Files by E-mail Sending Scan Files by E-mail Procedure for Sending by Email Scan files are sent after specifying scan settings and destinations. A Press the {Scanner}} key. Search Check Job Destination Destination Information 01 ABC 05 MNO 09 YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 tings remain. Note ❒ If a previous setting remains, press the {Clear Modes} } key. E Place the original, and then make the scan settings and settings for orientation if necessary. Scanner Reference p.12 “Scan Settings” 04 JKL 4 p.27 “Setting Originals” 08 VWX 12 Making the settings -& 15 D Make sure that no previous set- 16 Symbols AAH028S B If the user codes are set, enter a user code using the number keys, and then press the {#} } key. The initial scanner screen appears. Reference For information about user c odes, see Gene ral Settings Guide. C If the Network Delivery Scanner screen appears, press [ switch to the E-mail screen. ] to A Press [Options]. B Select items such as [Resolution], [Original Orientation],[Original Setting],[Mixed Sizes], and [Scan Size] using {U} or {T}, and then change their settings. Scan settings can be made in the same way as default scan settings. See p.12 “Scan Settings”. C Press the {Cancel} } key. The E-mail screen appears. F Specify the destination The E-mail screen appears. To specify a destination, you can select it using the Quick Dial key, search for and select it from the Destination List, select it by specifying a registration number, or enter the e-mail address directly. 37 On Hook Dial Sending Scan Files by E-mail Using a Quick Dial key to select a destination Searching to select a destination by name A Press the Quick Dial key in which the destination is registered. A Press the {Search Destination} } key. Search Check Job Destination Destination Information Search Check Job Destination Destination Information 01 Scanner 02 ABC 01 02 ABC 05 06 MNO 09 4 DEF PQR 10 YZ 13 @. ___ @. 14 03 GHI 07 STU 11 05 04 MNO JKL 09 08 PQR 10 YZ VWX 13 12 DEF 06 @. ___ @. 14 03 GHI 07 STU 11 Scanner 04 JKL 08 On Hook Dial VWX 12 -& 15 16 -& 15 Shift 16 Space Symbols AAH030S Shift Space Symbols AAH029S Reference For more information about how to register the destination, see General Settings Guide. B To select more destinations, repeat step A . Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. B Select [Search by Name] using {U} or {T}, and then press the {OK} } key. C Enter the beginning of the destination name, and then press the {OK} } key twice. Note ❒ Enter the first character or characters of the destination name. ❒ It is necessary to differentiate between uppercase and lowercase. Reference For information about how to enter characters, see General Settings Guide. 38 Sending Scan Files by E-mail D Select the destination using {U} or {T}, and then press the {OK} } key. C Select the destination using {U} or {T}, and then press the {OK} } key. E To select more destinations, repeat steps A to D. D To select more destinations, repeat steps A to C. Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. Selecting a destination from Destination List Searching to select a destination by registration number A Press the {Search Destination} } key. A Press the {Search Destination} } key. Search Check Job Destination Destination Information 01 ABC 05 MNO 09 YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 Search Check Job Destination Destination Information Scanner 04 01 JKL ABC 08 05 VWX MNO 12 09 16 13 -& 15 YZ Symbols Shift AAH030S B Select [Display Destination List] using { U } or { T } , and then press the {OK} } key. 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 4 Scanner On Hook Dial 04 JKL 08 VWX 12 -& 15 16 Symbols AAH030S B Select [Search by Registration No.] using { U } or { T } , and then press the {OK} } key. 39 Sending Scan Files by E-mail C Enter a 3-digit registration number that has been assigned to a destination using the number keys, and then press the {OK} } key. B Select [Search by E-mail Address] using { U } or { T } , and then press the {OK} } key. C Enter the beginning of the email address, and then press the {OK} } key twice. D Press the {OK} } key. 4 E To select more destinations, repeat steps A to D. Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. Searching to select a destination by e-mail address A Press the {Search Destination} } key. Search Check Job Destination Destination Information 01 ABC 05 MNO 09 YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 Reference For information about how to enter characters, see General Settings Guide. D Select the destination using {U} or {T}, and then press the {OK} } key. On Hook Dial 04 JKL 08 VWX 12 E To select more destinations, repeat steps A to D. 16 Symbols AAH030S 40 ❒ It is necessary to differentiate between uppercase and lowercase. Scanner -& 15 Note ❒ Enter the first character or characters of the destination name. Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. Sending Scan Files by E-mail Manual entry of an e-mail address A Press [Manual]. B Enter the e-mail address. Note ❒ Letters, number, and periods can be used. The symbols ()\,;:” cannot be used. Reference For information about how to enter characters, see General Settings Guide. C Press the {OK} } key. Note ❒ To change an e-mail address that has been entered, press [EditDest]. The E-mail Address screen appears. Enter the new e-mail address, and then press the {OK} } key. ❒ If the entered destination is longer than the Destination field, the address will be omitted and […] is displayed instead. D To enter more destinations, press [Add Dest], and then repeat steps A to C. Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. Checking selected destinations A Check the selected destinations in the Destination field. Note ❒ When multiple destinations are selected, the selected destinations are displayed in the order they were selected by pressing {U} or {T}. ❒ Press the {Check Destination} } key to check the selected destination. 4 G Select the file type if necessary. A Press [Options]. B Select [File Type] using {U} or {T}, and then press the {OK} } key. C Select the file type of the file to be attached to the e-mail using {U} or {T}, and then press the {OK} } key. The “Accepted ” message appears, and then the Send Options screen returns. D Press the {Cancel} } key. 41 Sending Scan Files by E-mail H Specify the e-mail sender. To specify a sender, you can select it using the Quick Dial key, search for and select it from the Destination List, or select it by specifying a registration number. A Press [Options]. B Select [Sender's Name] using {U} or {T}, and then press the {OK} } key. Using a Quick Dial key to select a sender A Press the Quick Dial key in which the sender is registered. Search Check Job Destination Destination Information 01 02 ABC 05 MNO 09 PQR 10 YZ 4 DEF 06 13 @. ___ @. 14 Shift Space 03 Scanner 04 GHI 07 JKL 08 STU 11 VWX 12 -& 15 16 Symbols AAH029S Note ❒ Step H can be omitted if [Key Op's E-mail Address] is specified for [Sender's Name Default] in [Send Settings] of [Scanner Features]. ❒ When a sender is selected, the sender name is automatically placed in the From field of the e-mail so that the sender can be identified by the recipient. ❒ To prevent misuse of a sender name, we recommend you set a sender's password for that sender name. ❒ Be sure to select or enter a sender name. Otherwise the key operator's e-mail address is used as the sender name. See General Settings Guide. Reference For more information about how to register the destination, see General Settings Guide. Note ❒ When a sender's password is set, a screen for entering the sender's password appears. Enter the sender's password using the number keys, and then press the {OK} } or {#} } key. If the password entered is correct, the sender name is displayed. B Press the {OK} } key. The “Accepted ” message appears, and then the Return Receipt screen returns. 42 Sending Scan Files by E-mail C For receiving a return receipt confirmation, select [On] using {U} or {T}, and then press the {OK} } key. The “ Accepted” message appears, and then the Send Options screen returns. Note ❒ When [On] is selected, an email notifying that the e-mail has been read by the recipient is sent to the sender selected here. However, if the mailing software used by the recipient does not support MDN (Message Disposition Notification), the e-mail may not be sent. Searching to select a sender by name A Press the {Search Destination} } key. Search Check Job Destination Destination Information 01 ABC 05 MNO 09 YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 B Select [Search by Name] using {U} or {T}, and then press the {OK} } key. C Enter the beginning of the sender name, and then press the {OK} } key twice. 4 Note ❒ Enter the first character or c h ara c t e r s o f t he s e nd e r name. ❒ It is necessary to differentiate between uppercase and lowercase. Reference For information about how to enter characters, see General Settings Guide. D Select the sender using {U} or {T}, and then press the {OK} } key. Scanner 04 On Hook Dial JKL 08 VWX 12 -& 15 16 Symbols AAH030S 43 Sending Scan Files by E-mail Note ❒ When a sender's password is set, a screen for entering the sender's password appears. Enter the sender's password using the number keys, and then press the { OK} } or {#} } key. If the password entered is correct, the sender name is displayed. E Press the {OK} } key. Selecting a sender from Destination List A Press the {Search Destination} } key. Search Check Job Destination Destination Information 01 ABC 05 MNO 09 YZ 13 4 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 Scanner 04 JKL 08 VWX 12 -& 15 16 Symbols AAH030S The “ Accepted” message appears, and then the Return Receipt screen returns. F For receiving a return receipt confirmation, select [On] using {U} or {T}, and then press the {OK} } key. B Select [Display Destination List] using { U } or { T } , and then press the {OK} } key. C Select the sender using {U} or {T}, and then press the {OK} } key. The “ Accepted” message appears, and then the Send Options screen returns. Note ❒ When [On] is selected, an email notifying that the e-mail has been read by the recipient is sent to the sender selected here. However, if the mailing software used by the recipient does not support MDN (Message Disposition Notification), the e-mail may not be sent. 44 Note ❒ When a sender's password is set, a screen for entering the sender's password appears. Enter the sender's password using the number keys, and then press the {OK} } or {#} } key. If the password entered is correct, the sender name is displayed. Sending Scan Files by E-mail D Press the {OK} } key. Searching to select a sender using a registration number A Press the {Search Destination} } key. Search Check Job Destination Destination Information The “ Accepted” message appears, and then the Return Receipt screen returns. E For receiving a return receipt confirmation, select [On] using {U} or {T}, and then press the {OK} } key. 01 ABC 05 MNO 09 YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 Scanner 04 JKL 08 VWX 12 -& 15 16 4 Symbols AAH030S B Select [Search by Registration No.] using { U } or { T } , and then press the {OK} } key. The “ Accepted” message appears, and then the Send Options screen returns. Note ❒ When [On] is selected, an email notifying that the e-mail has been read by the recipient is sent to the sender selected here. However, if the mailing software used by the recipient does not support MDN (Message Disposition Notification), the e-mail may not be sent. C Enter a 3-digit registration number that has been assigned to a sender using the number keys, and then press the {OK} } key twice. 45 Sending Scan Files by E-mail Note ❒ When a sender's password is set, a screen for entering the sender's password appears. Enter the sender's password using the number keys, and then press the { OK} } or {#} } key. If the password entered is correct, the sender name is displayed. D Press the {OK} } key. Searching to select a sender by e-mail address A Press the {Search Destination} } key. Search Check Job Destination Destination Information 01 02 ABC 05 MNO 09 PQR 10 YZ 13 4 DEF 06 @. ___ @. 14 Shift Space 03 GHI 07 STU 11 Scanner 04 JKL 08 VWX 12 -& 15 16 Symbols AAH030S The “ Accepted” message appears, and then the Return Receipt screen returns. E For receiving a return receipt conformation, select [On] using {U} or {T}, and then press the {OK} } key. B Select [Search by E-mail Address] using { U } or { T } , and then press the {OK} } key. C Enter the beginning of the sender's e-mail address, and then press the {OK} } key twice. The “ Accepted” message appears, and then the Send Options screen returns. Note ❒ When [On] is selected, an email notifying that the e-mail has been read by the recipient is sent to the sender selected here. However, if the mailing software used by the recipient does not support MDN (Message Disposition Notification), the e-mail may not be sent. F Press the {Cancel} } key. 46 Note ❒ Enter the first character or c h ara c t e r s o f t he s e nd e r name. ❒ It is necessary to differentiate between uppercase and lowercase. Reference For information about how to enter characters, see General Settings Guide. Sending Scan Files by E-mail D Select the sender using {U} or {T}, and then press the {OK} } key. Note ❒ When a sender's password is set, a screen for entering the sender's password appears. Enter the sender's password using the number keys, and then press the { OK} } or {#} } key. If the password entered is correct, the sender name is displayed. Note ❒ When [On] is selected, an email notifying that the e-mail has been read by the recipient is sent to the sender selected here. However, if the mailing software used by the recipient does not support MDN (Message Disposition Notification), the e-mail may not be sent. I Specify a subject if necessary. A Press [Options]. B Select [Attach Subject] using {U} or {T}, and then press the {OK} } key. 4 E Press the {OK} } key. The “ Accepted” message appears, and then the Return Receipt screen returns. F For receiving a return receipt confirmation, select [On] using {U} or {T}, and then press the {OK} } key. The “ Accepted” message appears, and then the Send Options screen returns. Note ❒ When a subject is set, it is added to the scan file. The subject appears automatically in the Subject field of the email. ❒ To specify a subject, you can select it from the list, enter it directly, or combine selecting and entering it. ❒ A subject to select from the list must be registered in [System Settings] in advance. See Network Guide. ❒ A subject can be entered using up to 64 characters. 47 Sending Scan Files by E-mail Manual entry of a subject A Select [Manual Input] using {U} or {T}, and then press the {OK} } key. B Enter a subject, and then press the {OK} } key. 4 B Select a subject using {U} or {T}, and then press the {OK} } key. The “Accepted ” message appears, and then the Send Options screen returns. J Press the {Cancel}} key. The initial scanner screen appears. K Press the {Start}} key. The “ Accepted” message appears, and then the Send Options screen returns. Note ❒ The original is scanned and the “ Scanning... ” message appears. Note ❒ When the subject to be entered exceeds 64 characters, “U” appears. • To interrupt scanning, press the {Clear/Stop} } key. ❒ The scan file is sent and the “ Sending... ” message appears. Selecting a subject from the list A Select [Select Programmed Subject] using {U} or {T}, and then press the {OK} } key. 48 • While sending a scan file, you cannot do any other job. • If sending fails, start the procedure again from the beginning. Checking the Status of E-mail Checking the Status of E-mail The status of the last 50 sendings can be checked. For every new sending record after 50, the oldest record is deleted. Important ❒ When the main power switch is turned off, all records are deleted. A Press the {Job Information}} key. Search Check Job Destination Destination Information 01 ABC 05 MNO Note ❒ When [Print&Del. Scanner Journal] is set to [On], the whole scanner journal is printed when the number of records reaches 50. ❖ Items that can be checked • Date/Time The date and time the e-mail was sent or the date “Error” was confirmed is displayed. • Page The number of pages of a scan file is displayed. • Status One of the following is displayed: “Done” or “Error”. • Destination The function that was used (e-mail or delivery function) is displayed with an icon. When multiple destinations were selected, the first selected destination is displayed. 09 YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 Scanner 04 JKL 08 VWX 12 -& 15 16 4 Symbols AAH031S B Check the displayed records. C If you want to print the scanner journal, press [Print], and then press the {Start} } key. Note ❒ The whole scanner journal is printed. D Press the {Cancel}} key. The display returns to the E-mail screen. 49 Sending Scan Files by E-mail 4 50 5. Using the Network Delivery Scanner Function Scan files can be sent to a specified destination using the network delivery scanner function. This chapter explains the preparation sequence, various display screens, delivery procedures, and how to check the delivery result when this function is used. Important ❒ A delivery server in which ScanRouter V2 Lite/Professional is installed is necessary to use the network delivery scanner function. Information about delivery destinations and senders must be registered first into the delivery server. Also, configure connected devices in [Set I/O Device] of ScanRouter V2 Administration Utility. For more information, see ScanRouter V2 Administration Utility Help. Preparation for Delivering To use the machine as a network delivery scanner, the preparation described below is required. 1 Connect to Network 2 Make System Settings 3 4 Make Scanner Settings Install Delivery Software Connect the machine to the network with an Ethernet cable, IEEE 1394 (optional) cable, or use Wireless LAN (optional). See Network Guide. Check the network settings in System Settings, and change if required. See Network Guide. Make settings for the network delivery scanner function, such as Destination List Settings. See p.9 “Initial Scanner Setup”. Install the software required for using the network delivery scanner functions, such as ScanRouter V2 Lite, on the delivery server. After installing the software, make the required settings for server maintenance and delivery service. See p.24 “ScanRouter V2 Lite”. 51 Using the Network Delivery Scanner Function 5 6 Set Destination Information, Sender Information, and connected devices Install Client Computer Software Use ScanRouter V2 Administration Utility to add destinations, senders, and connected devices. On the client computers, install the application required for viewing or retrieving files by connecting to the delivery server, such as DeskTopBinder V2 Lite. See p.22 “DeskTopBinder V2 Lite”. Network Delivery Scanner Screen These screens are shown when using the machine as a network delivery scanner. ❖ Main display 2 5 1 3 4 5 AAH019S ❖ When a destination is selected 6 1. Network Delivery Scanner icon ( ) Indicates that the Network Delivery Scanner screen is displayed. 52 7 5 AAH023S 2. Destination field Displays the selected destination. If multiple destinations are selected, the destinations are displayed in the order they were selected by pressing {U} or {T}. Note ❒ Press the {Check Destination} } key to check the selected destination. ❒ Group destinations are denoted by this symbol ( ). Preparation for Delivering 3. [ ] E-mail/Network Delivery Scanner Press to switch between the network delivery scanner function and the email function. 4. [Manual] When specifying a destination that is not registered, press [Manual], and then enter the e-mail address of the destination using the Quick Dial keys. 5. [Options] Press to make the scan settings such as resolution or scan size, the sender, and the subject of the e-mail to be sent. 6. [Add Dest] When selecting multiple destinations after a manual entry of a e-mail address, press [Add Dest], and then enter the e-mail address of the destination. 5 7. [EditDest] When changing the e-mail address that has been entered, press [EditDest], and then re-enter the e-mail address. 53 Using the Network Delivery Scanner Function Delivering Scan Files D Make sure that no previous set- Delivery Procedure tings remain. Scan files are delivered after scan settings and destinations are specified. If necessary, you can select a sender and a subject. A Press the {Scanner}} key. Search Check Job Destination Destination Information 01 ABC 05 5 MNO 09 YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 E Place the original in the machine, and then make the scan settings and settings for orientation if necessary. Scanner Reference p.12 “Scan Settings” 04 JKL 08 p.27 “Setting Originals” VWX 12 Making the settings -& 15 Note ❒ If a previous setting remains, press the {Clear Modes} } key. 16 Symbols AAH028S B If the user codes are set, enter a user code using the number keys, and then press the {#} } key. The initial scanner screen appears. A Press [Options]. B Select items such as [Resolution], [Original Orientation],[Original Setting],[Mixed Sizes], and [Scan Size] using {U} or {T}, and then change their settings. Reference For information about user c odes, see Gene ral Settings Guide. C If the E-mail screen appears, press [ ] to switch to the Network Delivery Scanner screen. Scan settings can be made in the same way as default scan settings. See p.12 “Scan Settings”. C Press the {Cancel} } key. The Network Delivery Scanner screen appears. F Specify the destination. The Network Delivery Scanner screen appears. 54 To specify a destination, you can select it using the Quick Dial key, search for and select it from the Destination List, select it by specifying a registration number, or enter the e-mail address directly. On Hook Dial Delivering Scan Files Note ❒ When using ScanRouter V2 Lite/Professional , the Destination List is updated automatically. Searching to select a destination by name A Press the {Search Destination} } key. Search Check Job Destination Destination Information Using a Quick Dial key to select a destination 01 02 ABC A Press the Quick Dial key in which the destination is registered. 05 MNO 09 YZ 02 ABC 05 DEF 06 MNO 09 PQR 10 YZ 13 @. ___ @. 14 Shift Space 03 GHI 07 STU 11 @. ___ @. 14 GHI 07 STU 11 04 JKL 08 VWX 12 -& 15 16 Scanner Shift 01 PQR 10 13 Search Check Job Destination Destination Information DEF 06 03 Scanner Space Symbols AAH030S 04 On Hook Dial B Select [Search by Name] using {U} or {T}, and then press the {OK} } key. JKL 08 VWX 12 5 -& 15 16 Symbols AAH029S Reference For more information about how to register the destination, see General Settings Guide. C Enter the beginning of the destination name, and then press the {OK} } key twice. B To select more destinations, repeat step A . Note ❒ To deselect a destination, press {U} or {T} to display the Destination in the destination field, and then press the {Clear/Stop} } key. Note ❒ Enter the first character or characters of the destination name. ❒ It is necessary to differentiate between uppercase and lowercase. Reference For information about how to enter characters, see General Settings Guide. 55 Using the Network Delivery Scanner Function 5 D Select the destination using {U} or {T}, and then press the {OK} } key. C Select the destination using {U} or {T}, and then press the {OK} } key. E To select more destinations, repeat steps A toD D. D To select more destinations, repeat steps A to C. Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. When selecting a destination from Destination List Searching to select a destination by registration number A Press the {Search Destination} } key. A Press the {Search Destination} } key. Search Check Job Destination Destination Information 01 ABC 05 MNO 09 YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 Search Check Job Destination Destination Information Scanner 04 01 JKL ABC 08 05 VWX MNO 12 09 16 13 -& 15 YZ Symbols Shift AAH030S B Select [Display Destination List] using { U } or { T } , and then press the {OK} } key. 56 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 Scanner On Hook Dial 04 JKL 08 VWX 12 -& 15 16 Symbols AAH030S B Select [Search by Registration No.] using { U } or { T } , and then press the {OK} } key. Delivering Scan Files C Enter a 3-digit registration number that has been assigned to a destination using the number keys, and then press the {OK} } key. C Enter the beginning of the comment, and then press the {OK} } key twice. D Press the {OK} } key. E To select more destinations, repeat steps A to D. Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. Searching to select a destination by comment A Press the {Search Destination} } key. Search Check Job Destination Destination Information 01 ABC 05 MNO 09 YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 5 Note ❒ Enter the first character or characters of the comment. ❒ It is necessary to differentiate between uppercase and lowercase. Reference For information about how to enter characters, see General Settings Guide. D Select the destination using {U} or {T}, and then press the {OK} } key. Scanner On Hook Dial 04 JKL 08 VWX E To select more destinations, repeat steps A toD D. 12 -& 15 B Select [Search by Comment] using {U} or {T}, and then press the {OK} } key. 16 Symbols AAH030S Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. 57 Using the Network Delivery Scanner Function Manual entry of a destination Note ❒ When using ScanRouter V2 Professional, it is possible to enter the e-mail address of the destination directly. However, settings for sending e-mail must be made in advance. A Press [Manual]. B Enter the e-mail address. 5 Note ❒ It is possible to use letters, number, and periods. The symbols ()\,;:” cannot be used. Reference For information about how to enter characters, see General Settings Guide. C Press the {OK} } key. Note ❒ To change an e-mail address that has been entered, press [EditDest]. The display returns to the E-mail Address screen. Make any changes, and then press the {OK} } key. ❒ If the entered destination is longer than the Destination field, the address will be omitted and […] is displayed instead. D To enter more destinations, press [Add Dest], and then repeat steps A to C. 58 Note ❒ To deselect a destination, press {U} or {T} to display the destination in the Destination field, and then press the {Clear/Stop} } key. Checking selected destinations A Use the Destination field to check which destinations are selected. Note ❒ When multiple destinations are selected, the selected destinations are displayed in the order they were selected by pressing {U} or {T}. ❒ Press the {Check Destination} } key to check the details of the selected destination. G Specify the sender (scan file de- liver source) if necessary. To specify a sender, you can search for and select it from the Destination List, or select it by specifying a registration number. A Press [Options]. B Select [Sender's Name] using {U} or {T}, and then press the {OK} } key. Delivering Scan Files Note ❒ When a sender is selected, the sender name is automatically placed in the From field of the e-mail so that the sender can be identified by the recipient. Using a Quick Dial key to select a sender A Press the Quick Dial key in which the sender is registered. Search Check Job Destination Destination Information 01 02 ABC 05 DEF 06 MNO 09 PQR 10 YZ 13 @. ___ @. 14 Shift Space 03 04 JKL 08 STU 11 VWX 12 -& 15 The “Accepted ” message appears, and then the Send Options screen returns. Note ❒ When [On] is selected, an email notifying that the e-mail has been read by the recipient is sent to the sender selected here. However, if the mailing software used by the recipient does not support MDN (Message Disposition Notification), the e-mail may not be sent. Scanner GHI 07 C For receiving a return receipt confirmation, select [On] using {U} or {T}, and then press the {OK} } key. 16 Symbols 5 AAH029S Reference For more information about how to register the destination, see General Settings Guide. B Press the {OK} } key. Searching to select a sender by name A Press the {Search Destination} } key. B Select [Search by Name] using {U} or {T}, and then press the {OK} } key. The “ Accepted” message appears, and then the Return Receipt screen returns. 59 On Hook Dial Using the Network Delivery Scanner Function C Enter the beginning of the sender name, and then press the {OK} } key twice. Note ❒ Enter the first character or ch arac ters of th e s en der name. ❒ It is necessary to differentiate between uppercase and lowercase. 5 Reference For information about how to enter characters, see General Settings Guide. D Select the sender using {U} or {T}, and then press the {OK} } key. F For receiving a return receipt conformation, select [On] using {U} or {T}, and then press the {OK} } key. The “Accepted ” message appears, and then the Send Options screen returns. Note ❒ When [On] is selected, an email notifying that the e-mail has been read by the recipient is sent to the sender selected here. However, if the mailing software used by the recipient does not support MDN (Message Disposition Notification), the e-mail may not be sent. When selecting a sender from Destination List A Press {Search Destination} }. E Press the {OK} } key. Search Check Job Destination Destination Information 01 ABC 05 MNO 09 The “ Accepted” message appears, and then the Return Receipt screen returns. YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 Scanner 04 JKL 08 VWX 12 -& 15 16 Symbols AAH030S 60 Delivering Scan Files B Select [Display Destination List] using { U } or { T } , and then press the {OK} } key. C Select the sender using {U} or {T}, and then press the {OK} } key. Note ❒ When [On] is selected, an email notifying that the e-mail has been read by the recipient is sent to the sender selected here. However, if the mailing software used by the recipient does not support MDN (Message Disposition Notification), the e-mail may not be sent. Searching to select a sender by registration number A Press the {Search Destination} } key. D Press the {OK} } key. Search Check Job Destination Destination Information 01 ABC 05 MNO 09 YZ The “ Accepted” message appears, and then the Return Receipt screen returns. E For receiving a return receipt conformation, select [On] using {U} or {T}, and then press the {OK} } key. 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 5 Scanner 04 JKL 08 VWX 12 -& 15 16 Symbols AAH030S B Select [Search by Registration No.] using { U } or { T } , and then press the {OK} } key. The “ Accepted” message appears, and then the Send Options screen returns. 61 Using the Network Delivery Scanner Function C Enter a 3-digit registration number that has been assigned to a sender using the number keys, and then press the {OK} } key twice. H Specify a subject if necessary. A Press [Options]. B Select[Attach Subject] using {U} or {T}, and then press the {OK} } key. D Press the {OK} } key. Note ❒ When a subject has been set, this information is added to the scan file. 5 The “ Accepted” message appears, and then the Return Receipt screen returns. E For receiving a return receipt conformation, select [On] using {U} or {T}, and then press the {OK} } key. The “ Accepted” message appears, and then the Send Options screen returns. Note ❒ When [On] is selected, an email notifying that the e-mail has been read by the recipient is sent to the sender selected here. However, if the mailing software used by the recipient does not support MDN (Message Disposition Notification), the e-mail may not be sent. 62 ❒ When ScanRouter V2 Professional is used to send files using e-mail, the subject is automatically placed in the Subject field of the e-mail. ❒ To specify a subject, you can select it from the list, enter it directly, or combine selecting and entering it. ❒ A subject to select from the list must be registered in [System Settings] in advance. See Network Guide. ❒ A subject can be entered using up to 64 characters. Manual entry of a subject A Select [Manual Input] using {U} or {T}, and then press the {OK} } key. Delivering Scan Files B Enter a subject, and then press the {OK} } key. The “ Accepted” message appears, and then the Send Options screen returns. Note ❒ When the subject to be entered exceeds 64 characters, “U” appears. B Select a subject using {U} or {T}, and then press the {OK} } key. The “Accepted ” message appears, and then the Send Options screen returns. I Press the {Cancel}} key. The initial scanner screen appears. J Press the {Start}} key. 5 Note ❒ The originals is scanned and the “ Scanning... ” message appears. When selecting a subject from the list A Select [Select Programmed Subject] using {U} or {T}, and then press the {OK} } key. • To interrupt scanning, press the {Clear/Stop} } key. ❒ The scan file is sent and the “ Sending... ” message appears. • While sending a scan file, you cannot do any other job. • If sending fails, start the all procedure again from the beginning. 63 Using the Network Delivery Scanner Function Checking the Status of Delivery The status of the last 50 deliveries can be checked. For every new delivery record after 50, the oldest record is deleted. Important ❒ When the main power switch is turned off, all records are deleted. A Press the {Job Information}} key. Search Check Job Destination Destination Information 01 ABC 05 MNO Note ❒ When [Print&Del. Scanner Journal] is set to [On], the whole journal is p ri n t ed w h e n th e nu m b er o f records reaches 50. ❖ Items that can be checked • Date/Time The date and time the delivery was requested or the date “Error ” was confirmed is displayed. • Page The number of pages of a scan file is displayed. • Status One of the following is displayed: “Done” or “Error”. • Destination The function that was used (email, or delivery function) is displayed with an icon. When multiple destinations were selected, the first selected destination is displayed. 5 64 09 YZ 13 Shift 02 DEF 06 PQR 10 @. ___ @. 14 Space 03 GHI 07 STU 11 Scanner 04 JKL 08 VWX 12 -& 15 16 Symbols AAH031S B Check the displayed records. C If you want to print the scanner journal, press [Print], and then press the {Start} } key. Note ❒ The whole scanner journal is printed. D Press the {Cancel}} key. The display returns to the E-mail screen. 6. Using the Network TWAIN Scanner Function This chapter describes the operations for scanning originals with the network TWAIN scanner using DeskTopBinder V2 Lite. In addition, the preparation for using the network TWAIN scanner and some functions of the TWAIN driver are introduced. Preparation for Using the Network TWAIN Scanner To use the machine as a network TWAIN scanner, the preparation described below is required. 1 Connect to Network 2 Make System Settings 3 Install Software Connect the machine to the network with an Ethernet cable, IEEE 1394 (optional) cable, or use Wireless LAN (optional). See Network Guide. Check the network settings in System Settings, and change if required. See Network Guide. On the client computers, install the software required for using the network TWAIN scanner functions, such as a TWAIN driver and DeskTopBinder V2 Lite. See p.19 “Software for Using a Network TWAIN Scanner”. Network TWAIN Scanner Screen When using the machine as a network TWAIN scanner, it is not necessary to press the {Scanner} } key on the control panel. When the TWAIN driver becomes active on a client computer, the display automatically switches to the following screen. Press [Exit] to use functions other than the network TWAIN scanner function. 65 Using the Network TWAIN Scanner Function Scanning Originals This section explains how to scan originals using the network TWAIN scanner function. A Start DeskTopBinder V2 Lite, and then select the scanner driver. A On the [Start] menu, point to [Program], point to [DeskTopBinder V2], and then click [DeskTopBinder V2]. B Click [Scanner Settings] on the [Tools] menu. If the scanner is already selected, no scanner settings are necessary. Check the settings in the [File format for scanned image(s)] area, and then proceed to step E. C Click [Select Scanner Driver...]. D Select the name of the machine you want to use in the list, and then click [Select...]. E Click [OK]. 6 B Place the original in the scanner. Reference p.27 “Setting Originals” C Make the scan settings. A On the [File] menu, point to [Add Document], and then click [Scan]. The TWAIN driver starts. After a short while, the dialog box of the TWAIN driver that operates the scanner appears. This dialog box is called the Scanner Properties dialog box. 66 Note ❒ The name of the scanner currently being used is shown on the title bar of the dialog bo x. W h en m ult iple m achines are connected, make sure that the indicated machine is the machine you want to use. If it is different, click [Select Scanner] to select the scanner again. ❒ If the machine you want to use is not displayed in the list, make sure that the IP address is configured and that the machine is correctly connected to the network. If the machine is still not displayed in the list after confirming the above, consult with your network administrator. B Depending on the type of original or the objective for scanning, click the appropriate button in [Mode]. • [Standard] is suitable for scanning standard originals that are comprised of mainly text. • [Photo] is suitable for scanning originals that include photos, shaded illustrations, etc. • [OCR] is suitable for conversion processing with an OCR (Optical Character Reading) application after scanning the original. • [Filing] is suitable for use with filing applications, etc. Scanning Originals Note ❒ For advanced settings, click [Detail] to display the Detail window. For information about the Detail window, see TWAIN driver Help. C According to the settings of [Document] and [Orientation:], change the other setting of the [Document] group. Reference p.33 “For a Network TWAIN Scanner” For information about making settings for the [Document] group, see TWAIN driver Help. When you want to configure the scanning area When you do not configure the scanning area, the area scanned is the size specified in the [Size:] box. A Click [Preview]. The original that was placed is scanned and the [Preview] dialog box appears. The scanning area in the preview is displayed within the broken lines. Note ❒ When you change the scan settings after previewing the original, scan that original again. B Configure the scanning area by dragging a border or a corner. When reconfiguring the area, click and drag one corner of the area towards or away from its opposite corner. Note ❒ Depending on the scanning resolution, the area to be scanned may be subject to restrictions. C Click [Close]. Note ❒ When an original placed in the ADF is previewed, place that original again. D Click [Scan]. When there are additional originals to scan, place the original, and then click [Continue]. When there are no more originals, click [Complete]. E Save the scan file in DeskTopBinder V2 Lite. A On the [File] menu, click [Exit]. B Enter the file name, and then click [OK]. The scan file is stored in DeskTopBinder V2 Lite, and DeskTopBinder Viewer closes. 6 - Editing and printing scan files With DeskTopBinder V2 Lite, it is possible to edit and print scan files. For more information about how to edit and print, see DeskTopBinder V2 Lite Help. 67 Using the Network TWAIN Scanner Function Functions of the TWAIN Driver The following is an introduction to the various functions of the TWAIN driver: ❖ Automatic Tilt Correction This function automatically corrects character strings that were scanned slanted. ❖ Printing to the Image This function allows you to imprint dates, page numbers, or your favorite characters on a scan file. You can also change the fonts of the imprints as well as change the ascending order of images to a descending order. ❖ Scanning Mode Registration This function allows you to register other scanning configurations that are often used as scanning modes besides the already pre-installed ones. After registration, you can quickly scan with these scanning configurations. 6 Reference For more information about these functions or other functions, see TWAIN driver Help. 68 7. Appendix Relationship between Resolution and File Size Resolution and scan area are inversely related. The higher the resolution is set, the smaller the area that can be scanned. Conversely, the larger the scan area, the lower the resolution that can be set. The relationship between the scanning resolution and the file size is shown below. If the file size is too large, the message “Exceeded max.data capacity. Check the scanning resolution.” appears on the control panel of the machine. Specify the scan size and resolution again. Limitation ❒ Depending on the image compression level, the maximum image size will be limited. When Using as E-mail or Network Delivery Scanner All combinations up to 297 × 432 mm/11.6 × 17.0 inches (A3, 11 × 17 inches) and 600 dpi are possible. When Using as a Network TWAIN Scanner All combinations up to 297 × 432 mm/11.6 × 17.0 inches (A3, 11 × 17 inches) and 600 dpi are possible. Reference To specify the scanning area or resolution when using the machine as a network TWAIN scanner, see TWAIN driver Help. Note ❒ When the originals cannot be scanned, select [No compression] in Select Device Data Compression. 69 Appendix Max. Number of Addresses Which Can Be Specified The number of addresses which can be specified at a time when sending The number of addresses which can be registered in the list E-mail Delivery Server 100 *1 100 *2 150 See the manuals for ScanRouter V2 Lite/Professional. The max. number of files which can be scanned 1 The max. number of pages which can be scanned 100 The max. number of pages which can be scanned as a single file 100 *1 *2 Up to 50 addresses can be entered directly. All remaining addresses have to be specified using the registered ones. The maximum number of addresses which can be specified varies depending on the software you use, ScanRouter V2 Lite or ScanRouter V2 Professional. For more information, see the manuals for ScanRouter V2 Lite/Professional. Note ❒ Sometimes the machine cannot scan files to the maximum number depending on the type of originals. ❒ When the power switch is turned off, all records are deleted. 7 70 Troubleshooting Troubleshooting This section contains advice on what to do if you have problems scanning an original, or if the network delivery scanner or e-mail function does not work. Various messages that may appear on the control panel or client computer are listed, along with causes and solutions. When Scanning Is Not Performed as Expected Problems Causes and solutions No image results from scanning. The original was placed with the front and back reversed. When the original is placed directly on the exposure glass, the side to be scanned must face down. When the original is fed via the ADF, the side to be scanned must face up. See p.27 “Setting Originals”. The image is distorted or out of position. • The original was moved during scanning. Do not move the original during scanning. • The original was not pressed flat against the exposure glass. Make sure that the original is pressed flat against the exposure glass. The scanned image is dirty. The exposure glass or the exposure glass cover is dirty. Clean these parts. See General Settings Guide. The scanned image is upside down. The original was placed upside down. Place the original in the correct orientation. See p.27 “Setting Originals”. 7 When the Delivery Function Does Not Work Problems Causes and solutions The delivery scanner function screen is not displayed. • If the network TWAIN scanner screen appears when the machine is switched to scanner mode, press [Exit] to switch to the network delivery scanner screen. • If the display does not switch from network TWAIN scanner to network delivery scanner, the delivery scanner settings are not correct. See p.9 “Scanner Features”, and then make the appropriate settings. 71 Appendix When an Error Message Appears on the Control Panel Note ❒ If an error message that is not included in this section appears, turn off the main power switch of the machine, and then turn it on again. If the message still appears, note the content of the message and the error number (if listed in the table), and contact your service representative. For information about how to turn off the main power switch, see General Settings Guide. Message Causes and solutions Cannot detect original size Select scan size • Place the original correctly. • Specify the scan size. • When placing an original directly on the exposure glass, the lifting/lowering action of the ADF triggers the automatic original size detection process. Lift the ADF by more than 30 degrees. Cannot enter manually more than nnn destinations. Note ❒ “nnn” in the message represents a changeable number. 7 When there are nnn or more destinations for a delivery or an e-mail, split the destinations into two or more groups. Cannot specify more than 100 destina- When there are 100 or more destinations. tions for a delivery or an e-mail, split the destinations into two or more groups. Exceeded max. data capacity Check resolution and Start Specify the scan size and resolution again. Note that it may not be possible to scan very large originals at a high resolution. See p.69 “Relationship between Resolution and File Size”. Specify the scan size and resolution again. Note that it may not be possible to scan very large originals at a Note high resolution. See p.69 “Relation❒ This message appears when using the ADF. ship between Resolution and File ❒ “nnn” in the message represents a changeable num- Size”. ber. Exceeded max. data capacity Check the resolution and reset nnn original(s) Exceeded max. E-mail size. Sending E- • Increase the size of [Max. E-mail mail has been cancelled. Size]. • Set [Divide & Send E-mail] to [On (per page)] or [On (per max. size)]. 72 Troubleshooting Message Causes and solutions Exceeded max. page capacity. Do you want to send the scanned data? Scanned data will be cleared when selecting [No]. Because the number of pages has reached the maximum number that can be sent, the data up to this point is sent. Scan the remaining pages after transmission. Exceeded max.memory capa. Scanning will be cancelled. Scanned data will be cleared. Because of insufficient memory space, the first page could not be scanned. Try one of the following measures: • Wait for a while, and then retry the scan operation. • Reduce the scan area or scanning resolution. Exceeded max. memory capacity. Do you want to send the scanned data? Scanned data will be cleared when selecting [No]. Because there is not enough free memory space in the machine for delivery or e-mail, only some of the pages could be scanned. Specify whether or not to deliver the data. No valid dest. lists. Check the settings or the server status. Check that the delivery server is on and the authentic settings for the delivery server are correct. Original is being scanned by another function. The machine is using another function such as copying. Retry scanning after the operation with the other function is completed. Sending has failed. Press Job Information key to check the status. While a file was being sent, a network error occurred and the file could not be sent correctly. Try the operation once more. 7 If the message is still shown, the network may be crowded. Consult the network administrator. Use the Job Information screen to check for the file where the problem occurred. See p.49 “Checking the Status of E-mail” or p.64 “Checking the Status of Delivery”. If there is not enough free hard disk space in the destination server, free the necessary hard disk space. Destination list has been updated. Se- A specified destination or sender's name was cleared when the destinalected destinations/sender will be cleared. tion list in the delivery server was updated. Specify the destination or sender's name again. E-mail address entered is incorrect. Please re-enter. Make sure the e-mail address is correct, and then enter it again. 73 Appendix Message Causes and solutions Specified group contains some invalid dest. Do you want to select only valid dest.? The group contains members whose e-mail addresses are not registered. Please check the e-mail addresses of the group and make selections again. Updating destination list. Reselect destination(s) or sender's name later. If a destination or a sender's name was already selected, re-select it after this message disappears. Updating destination list has failed. Try again? Check whether the server is connected. When an Error Message Appears on the Client Computer This section describes the main possible causes and actions for error messages displayed on the client computer when the TWAIN driver is used. Note ❒ If an error message that is not contained in this section appears, turn off the main power switch of the machine, and then turn it on again. If the message is still shown after scanning is performed again, note the content of the message and the error number (if listed in the table), and contact your service representative. For information about how to turn off the main power switch, see General Settings Guide. 7 Message Causes and solutions [Cannot add any more scanning mode.] The maximum number of modes that can be stored is 99. Delete unneeded modes. [Cannot connect to the scanner. Check the network Ac- The access mask is set. Consult the network or scanner administrator. cess Mask settings in User Tools.] [Cannot detect the paper size of the original. Specify the scanning size.] • Place the original correctly. • Specify the scan size. • When placing an original directly on the exposure glass, the lifting/lowering action of the ADF triggers the automatic original size detection process. Lift the ADF by more than 30 degrees. [Cannot find the scanner. Check if the scanner main power is on.] • Check whether the main power switch of the machine is turned off. • Check whether the machine is connected to the network correctly. • Deselect the personal firewall function of the client computers. [Cannot specify any more scanning area.] 74 The maximum number of scanning areas that can be stored is 99. Delete unneeded scanning areas. Troubleshooting Message Causes and solutions [Clear Misfeed(s) in ADF.] Remove the jammed originals. When originals are misfed, place them again. Check whether the originals are suitable to be scanned by the machine. [Communication error has occurred on the network.] Check whether the client computer can use the TCP/IP protocol. [Error has occurred in the scanner.] Check whether the scanning settings made with the application exceed the setting range of the machine. [Error has occurred in the scanner driver.] • Check whether the network cable is connected correctly to the client computer. • Check whether the Ethernet board of the client computer is recognized correctly by Windows. • Check whether the client computer can use the TCP/IP protocol. [Fatal error has occurred in the scanner.] An unrecoverable error has occurred in the machine. Call your service representative. [Insufficient memory. Close all other applications, then restart scanning.] Close all the unnecessary applications running on the client computer. [Insufficient memory. Reduce the scanning area.] • Reset the scan size. 7 • Lower the resolution. • Set with no compression. See p.14 “Send Settings”. Note ❒ When a paper misfeed occurs in the machine during printing, scanning cannot be performed. In this case, after the misfed paper has been removed, proceed with scanning. [Invalid Winsock version. Please use version 1.1 or high- Reinstall the operating system of the comer.] puter or copy Winsock from the operating system CD-ROM. [No response from the scanner.] • Check whether the machine is connected to the network correctly. • The network is crowded. Wait for a while, and then try to reconnect. [No User Code is registered. Consult your system administrator.] Access is restricted with user codes. Consult the system administrator of the machine. [Please call your service representative.] An unrecoverable error has occurred in the machine. Call your service representative. 75 Appendix Message Causes and solutions [Scanner is in use for other function. Please wait.] A function of the machine other than the scanner function is being used such as the copier function. Wait for a while and reconnect. [Scanner is not available. Check the scanner connection status.] • Check whether the main power switch of the machine is turned off. • Check whether the machine is connected to the network correctly. • Deselect the personal firewall function of the client computers. 7 76 [Scanner is not ready. Check the scanner and the options.] Check whether the ADF cover is closed. [The name is already in use. Check the registered names.] You tried to register a name that is already in use. Use another name. Specifications Specifications Scan method Scan speed *1 Flatbed scanning • E-mail/Network Delivery Scanner Approx.43 pages/minute [Scan size:A4R, Original type: Text(Print), Resolution: 200dpi, Compression: On (MH), Document feeder: ADF, ITU-T No.1 Chart] • TWAIN Scanner Approx.25 pages/minute [Scan size:A4R, Colors/Gradations:Binary, Resolution: 200dpi, Select device data compression (Binary/Halftone): Data compression (MMR), Document feeder: ADF, ITU-T No.1 Chart] Maximum power consumption Less than 1280 W Image sensor type CCD Image Sensor Scan types Sheet, book Interface Ethernet interface (10BASE-T or 100BASE-TX), IEEE 1394 (IP over 1394) [optional], and IEEE 802.11b (Wireless LAN) [optional] Maximum scan size 297 × 432 mm/11.6 × 17.0 inches(A3, 11 × 17 inches) Scan sizes that can be detected au- • Exposure glass tomatically 11” × 17”S, 8.5” × 14”S, 8.5” × 11”RS, 8” × 13”S 7 • ADF 11” × 17”S, 8.5” × 14”S, 8.5” × 11”RS, 5.5” × 8.5”RS, 10” × 14”S Resolution 600 dpi Variable range of scan resolution • E-mail/Network Delivery Scanner Setting range: 100 dpi, 200 dpi, 300 dpi, 400 dpi, and 600 dpi • TWAIN Scanner Setting range: 100 dpi - 600 dpi File formats that can be sent by e- TIFF, PDF mail Compression method Binary: TIFF (MH, MR, MMR) Protocol Network: TCP/IP Sending e-mail:SMTP *1 Scanning speeds vary according to machine operating conditions, computer (specification, network traffic, and software, etc.), and original types. 77 INDEX A E Automatic Tilt Correction, 68 Auto run program, 17 E-mail, 35 E-mail Informatn. Language, 15 E-mail Screen, 36 C Checking the status of delivery, 64 Checking the Status of E-mail, 49 Compression, 14 Control Panel, 6 D Default Scan Settings, 12 Delivering Scan Files, 54 Delivery Procedure, 54 Checking selected destinations, 58 Manual entry of a destination, 58 Manual entry of a subject, 62 Searching to select a destination by comment, 57 Searching to select a destination by name, 55 Searching to select a destination by registration number, 56 Searching to select a sender by name, 59 Searching to select a sender by registration number, 61 Using a Quick Dial key to select a destination, 55 Using a Quick Dial key to select a sender, 59 When selecting a destination from Destination List, 56 When selecting a sender from Destination List, 60 When selecting a subject from the list, 63 DeskTopBinder V2 Lite, 21, 22, 65 Destination List Priority, 14 Destination List Settings, 10, 14 Divide&Send Mail, 15 78 F File Type Priority, 14 Functions of the TWAIN Driver, 68 I Initial scanner setup, 9 Installing software, 17 M Max. E-mail Size, 15 Max. Number of Addresses Which Can Be Specified and Files Which Can Be Stored, 70 Mixed Orig. Sizes Priority, 12 Mode, 66 N Network delivery scanner, 51 Network Delivery Scanner Screen, 52 Network TWAIN scanner, 65 O Original orientation and scan area, 31 For a Network TWAIN Scanner, 33 For E-mail and a Network Delivery Scanner, 31 Original Setting, 12 Original Type Setting, 13 Orig. Orientation Priority, 13 Outline, 3 E-mail, 3 Network delivery scanner, 4 Network TWAIN scanner, 5 P Placing Originals, 27 Placing on the exposure glass, 28 Placing original in the Auto Document Feeder (ADF), 29 Preparation for Delivering, 51 Preparation for Sending by E-mail, 35 Preview, 67 Print & Del. Scanner Journal, 14 Printing to the image, 68 Procedure for Sending by E-mail, 37 Checking selected destinations, 41 Manual entry of an e-mail address, 41 Manual entry of a subject, 48 Searching to select a destination by email address, 40 Searching to select a destination by name, 38 Searching to select a destination by registration number, 39 Searching to select a sender by e-mail address, 46 Searching to select a sender by name, 43 Searching to select a sender using a registration number, 45 Selecting a destination from Destination List, 39 Selecting a sender from Destination List, 44 Selecting a subject from the list, 48 Using a Quick Dial key to select a destination, 38 Using a Quick Dial key to select a sender, 42 R Reading the Display and Using Keys, 8 Relationship between resolution and file size, 69 When Using as a Network TWAIN Scanner, 69 When Using as E-mail or Network Delivery Scanner, 69 Resolution, 12 S Save, 67 Scanner Features, 9 Setting procedure, 10 Scanning mode registration, 68 Scanning originals, 66 Scanning Originals in Several Times using the Exposure Glass, 34 ScanRouter V2 Lite, 24 Scan Settings, 9, 12 Scan size, 12 Selecting a custom size, 13 Sender's Name Default, 15 Sending Scan Files by E-mail, 37 Send Settings, 10, 14 Setting Originals, 27 SMTP server, 3 Software for Using the Network Delivery Scanner Function, 20 Software supplied on CD-ROM, 21 Specifications, 77 T Troubleshooting, 71 When an Error Message Appears on the Client Computer, 74 When an Error Message Appears on the Control Panel, 72 When Scanning Is Not Performed as Expected, 71 When the Delivery Function Does Not Work, 71 TWAIN Standby Time, 14 Type2018 TWAIN Driver, 21 U Update server dest. list, 14 79 80 EN USA B622-8580 In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a means POWER ON. c means STAND BY. Note to users in the United States of America Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio /TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note to users in Canada Note: This Class B digital apparatus complies with Canadian ICES-003. Remarque concernant les utilisateurs au Canada Avertissement: Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Caution (in case of 100BASE-TX environment): Network interface cable with ferrite core must be used for RF interference suppression. Declaration of Conformity Product Name: Printer/Scanner Controller Model Number: Printer/Scanner Unit Type 2018 Responsible party: Ricoh Corporation Address: 5 Dedrick Place, West Caldwell, NJ 07006 Telephone number: 973-882-2000 This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Copyright © 2003 Printer/Scanner Unit Type 2018 Operating Instructions Scanner Reference EN USA B622-8580
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement