Samsung P2050 User manual

SyncMaster P1950W,P2050,P2250,P2350,P2050G,P2250G,P2350G
LCD Monitor
User Manual
The appearance and the color may differ depending on the
model.
Downloaded from ManualMonitor.com Manuals
Downloaded from ManualMonitor.com Manuals
Table Of Contents
MAJOR SAFETY PRECAUTIONS
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Custody and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
INSTALLING THE PRODUCT
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Installing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Removing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Installing the Stand for the Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Connecting with a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Kensington Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
USING THE PRODUCT
Setting the Optimal Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Installing the Device Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Product Operating Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Using the Screen Adjustment Menu (OSD: On Screen Display) . . . . 3-5
INSTALLING THE SOFTWARE
Natural Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
MagicTune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
MultiScreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
TROUBLESHOOTING
Monitor Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
MORE INFORMATION
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only . . . . . . . 6-4
Downloaded from ManualMonitor.com Manuals
Downloaded from ManualMonitor.com Manuals
1
Major Safety Precautions
1-1
Before You Start
Icons used in this manual
ICON
NAME
MEANING
Caution
Indicates cases where the function may not work or the setting may be canceled.
Note
Indicates a hint or tip to operate a function.
Using this Manual
•
Make yourself fully aware of the safety precautions before using this product.
•
If a problem occurs, refer to the 'Troubleshooting' section.
Copyright Notice
The contents of this manual are subject to change without prior notice for performance improvement.
Copyright © 2009 Samsung Electronics Co., Ltd. All Rights Reserved.
The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written
permission of Samsung Electronics, Co., Ltd.
The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics, Co., Ltd.
Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.
The ENERGY STAR logo is the registered trademark of the U.S. Environmental Protection Agency.
All other trademarks mentioned herein belong to their respective companies.
As a partner of ENERGY STAR, Samsung Electronics, Co., Ltd. admits that this product satisfies the ENERGY STAR
specifications for energy saving.
Major Safety Precautions
Downloaded from ManualMonitor.com Manuals
1-1
1-2
Custody and Maintenance
External Surface and Screen Maintenance
Clean the product with a soft dry cloth.
•
Do not clean the product with an inflammable substance such
as benzene or thinner or with a wet cloth. This may result in a
problem with the product.
•
Do not scratch the screen with your fingernails or a sharp
object.
This may result in scratches or damage to the product.
•
Do not clean the product directly by spraying water onto the
product.
If water enters the product, it may result in fire, electric shock or
a problem with the product.
•
A white stain may be generated on the surface of the highglossy model due to the inherent characteristics of the material,
if a supersonic humidifier is used.
The appearance and the color may differ depending on the
model.
About persistent images
•
Displaying a still image for a long time may create a persistent image or stain on the screen. If you do not use the product for
a long time, set the power-saving mode or screen saver.
•
Due to technological constraints of the LCD Panel manufacturer, the images generated by this product may appear either
brighter or darker than normal by appr. 1ppm (parts per million) pixel.
The number of sub-pixels of an LCD panel by size: The number of Sub-Pixels = Max. Horizontal Resolution x Max. Vertical
Resolution x 3
Example) If the maximum resolution is 1680 x 1050, the number of sub-pixels is 1680 x 1050 x 3 = 5,292,000.
1-2
Downloaded from ManualMonitor.com Manuals
Major Safety Precautions
1-3
Safety Precautions
Icons used for safety precautions
ICON
NAME
MEANING
Warning
Failing to follow the precautions marked with this sign, may result in a serious injury or
even a fatality.
Caution
Failing to follow the precautions marked with this sign, may result in a personal injury or
property damage.
Meaning of Signs
Do not perform.
Must be followed.
Do not disassemble.
The power plug must be unplugged from the
wall outlet.
Do not touch.
Must be grounded to prevent electric shock.
Power Related
The following images are for your reference and may differ depending on models and countries.
Warning
Avoid using a damaged power cord or plug or a
loose power outlet.
Avoid connecting multiple electric appliances to
a single wall outlet.
•
•
Otherwise, it may result in electric shock or
fire.
Avoid plugging in or unplugging the power
supply with wet hands.
•
Otherwise, it may result in fire due to
overheating of the wall outlet.
Plug the power plug in firmly.
•
Otherwise, it may result in fire.
Otherwise, it may result in electric shock.
Make sure to connect the power cord to a
grounded wall outlet (for insulation class 1
equipment only).
Avoid bending or twisting the power cord
excessively and avoid placing heavy objects on
the cord.
•
•
Otherwise, it may result in electric shock or
injury.
Otherwise, it may result in electric shock or
fire due to a damaged power cord.
Keep the power cord and the product away
from a heater.
If the pins of the power plug or the wall outlet
are covered in dust, clean it using a dry cloth.
•
•
Otherwise, it may result in electric shock or
fire.
Major Safety Precautions
Downloaded from ManualMonitor.com Manuals
Otherwise, it may result in fire.
1-3
Caution
Avoid unplugging the power plug while the
product is operating.
•
Otherwise, it may damage the product due
to electric shock.
When unplugging the power plug from the wall
outlet, make sure to hold it by the plug and not
by the cord.
•
Make sure to use only the power cord supplied
by our company. In addition, do not use the
power cord of another electric appliance.
•
Otherwise, it may result in electric shock or
fire.
Connect the power plug to a wall outlet that can
be easily reached.
•
Otherwise, it may result in electric shock or
fire.
When a problem occurs with the product,
you must unplug the power plug to cut the
power off completely. You cannot cut the
power off completely using only the power
button on the product.
Installation Related
Warning
Avoid placing burning candles, mosquitorepellent or cigarettes on the product and
installing the product near a heater.
Ask an installation engineer or relevant
company to install the product onto the wall.
•
Otherwise, it may result in injury.
•
•
Make sure to use the specified wall mount.
Otherwise, it may result in fire.
Avoid installing the product in a badly-ventilated
location such as inside a bookshelf or closet.
Keep a distance of at least 10 cm from the wall
when installing the product for ventilation.
•
•
Otherwise, it may result in fire due to
internal over-heating.
Keep the plastic bags used to pack the product
away from children.
•
If children place the plastic bags over their
heads, they may suffocate.
Otherwise, it may result in fire due to
internal over-heating.
Avoid installing the product in a location that is
unstable or exposed to excessive vibrations
such as on an unstable or slanted shelf.
•
The product may fall and this may result in
damage to the product or injury.
•
If you use the product in a location exposed
to excessive vibrations, it may result in a
problem with the product or fire.
Avoid installing the product in a location
exposed to dust, moisture (sauna), oil, smoke
or water (rain drops) and installing it within a
vehicle.
Avoid installing the product in a location
exposed to direct sunlight and installing the
product near a heat source such as a fire or
heater.
•
•
This may result in electric shock or fire.
This may shorten the product life cycle or
cause fire.
Avoid installing the product at an easily
reachable height where children may reach it.
•
If a child touches the product, the product
may fall and this may result in injury.
•
Since the front part is heavier, install the
product on a flat and stable surface.
1-3
Downloaded from ManualMonitor.com Manuals
Major Safety Precautions
Caution
Do not let the product drop while moving it.
•
This may result in a problem with the
product or injury.
When installing the product on a console or
shelf, make sure that the front of the product
does not protrude out of the console or shelf.
•
Otherwise, this may cause the product to
fall off and result in a malfunction or injury.
•
Make sure to use a cabinet or shelf suitable
to the size of the product.
Do not place the product face down on the
floor.
•
This may damage the panel of the product.
When putting the product down, handle it
gently.
•
Otherwise, it may result in a problem with
the product or injury.
If the product is installed in a location where the
operating conditions vary considerably, a
serious quality problem may occur due to the
surrounding environment. In this case, install
the product only after consulting one of our
service engineers about the matter.
•
Places exposed to microscopic dust,
chemicals, too high or low temperature,
high humidity, such as airports or stations
where the product is continuously used for
a long time and so on.
Cleaning Related
Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result
in the discoloration or cracking of the product exterior or the panel surface coming off, be sure to use the recommended cleansing agent only.
You can purchase the recommended cleansing agent from a service center.
Before cleaning the product, unplug the power
cord.
When cleaning the product, do not spray water
directly over the product parts.
•
•
Make sure that water does not enter the
product.
•
Otherwise, it may result in fire, electric
shock or a problem with the product.
Otherwise, it may result in electric shock or
fire.
Major Safety Precautions
Downloaded from ManualMonitor.com Manuals
1-3
Caution
Avoid spraying cleansing agent directly onto
the product.
•
This may result in discoloration or cracking
of the exterior of the product or the panel
coming off.
When cleaning the product, disconnect the
power cord and clean the product with a soft
dry cloth.
•
Avoid using chemicals such as wax,
benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or cleansing
agent when cleaning the product.
This may result in the exterior being
deformed or the print being removed.
Use a soft, damp cloth with a "monitorexclusive cleansing agent" and wipe the
product with it.
•
If no monitor-exclusive cleansing agent is
available, dilute a cleansing agent with
water at a ratio of 1:10 before cleaning the
product.
Since the exterior of the product is easily
scratched, be sure to use a proper cleansing
cloth. Use the cleansing cloth with a small
amount of water. However, if the cloth is
contaminated by alien substances, it may result
in scratches to the exterior; therefore shake off
any alien substances from the cloth before
using it.
Usage Related
Warning
Since a high voltage runs through the product,
never disassemble, repair or modify the product
yourself.
•
Otherwise, it may result in fire or electric
shock.
•
If the product needs to be fixed, contact
a service center.
If the product generates a strange noise, a
burning smell, or smoke, unplug the power
plug immediately and contact a service center.
•
Make sure that water does not enter the
product.
•
Otherwise, it may result in fire, electric
shock or a problem with the product.
Avoid letting children to hang or climb onto the
product.
•
Otherwise, it may result in the product
falling and this may result in injury or death.
Avoid placing objects such as toys and cookies
on top of the product.
•
Otherwise, it may result in fire or electric
shock.
When thunder or lighting occurs, unplug the
power cord and under no circumstance touch
the antenna cable as this is dangerous.
•
•
Otherwise, it may result in electric shock or
fire.
If you drop the product or the case is damaged, turn the power off and unplug the
power cord. Contact a service center.
•
When cleaning the product, do not spray water
directly over the product parts.
Otherwise, it may result in electric shock or
fire.
1-3
Downloaded from ManualMonitor.com Manuals
If a child hangs over the product to grab an
object, the object or the product may fall
and this may result in injury or even death.
Avoid dropping an object over the product or
cause impact to the product.
•
Otherwise, it may result in electric shock or
fire.
Major Safety Precautions
Avoid moving the product by pulling the power
cord or antenna cable.
•
Otherwise, it may result in electric shock,
fire or a problem with the product due to
damage to the cable.
When a gas leak occurs, do not touch the
product or the power plug and ventilate
immediately.
•
A spark may result in an explosion or fire.
•
During a thunder or lighting storm, do not
touch the power cord or antenna cable.
Avoid lifting up or move the product by holding
only the power cord or signal cable.
Avoid using or placing inflammable spray or
objects near the product.
•
•
Otherwise, it may result in electric shock,
fire or a problem with the product due to
damage to the cable.
Take care not to block the vent by a table cloth
or curtain.
•
Otherwise, it may result in fire due to
internal overheating.
This may result in an explosion or fire.
Avoid inserting metal objects such as a
chopsticks, coins or hairpins, or inflammable
objects into the product (the vents, ports, etc).
•
If water or an alien substance enters the
product, turn the power off, unplug the
power cord and contact a service center.
•
Otherwise, it may result in a problem with
the product, electric shock or fire.
Avoid placing a liquid container such as a vase,
flowerpot, beverage, cosmetics or drugs, or a
metal object over the product.
•
If water or an alien substance enters the
product, turn the power off, unplug the
power cord and contact a service
center.
•
Otherwise, it may result in a problem with
the product, electric shock or fire.
Caution
Displaying a still image for a long time may
create a persistent image or stain on the
screen.
When not using the product for a long time
such as leaving your home, unplug the power
cord from the wall outlet.
•
•
If you do not use the product for a long time,
use the power-saving mode or set the
screensaver to the moving picture mode.
Otherwise, it may cause dust accumulation
and result in fire caused by overheating or
short circuit or result in an electric shock.
Set the appropriate resolution and frequency
for the product.
Avoid turning the product upside down or move
the product holding only the stand.
•
•
Otherwise, it may result in eye strain.
Watching the product from too close a distance
continuously may damage your eyesight.
Avoid using a humidifier or cooker near the
product.
•
It is important to give your eyes some rest (5
minutes every hour) when viewing the product
screen for long periods of time.
•
This may cause the product to fall resulting
in damage to the product or injury.
Otherwise, it may result in electric shock or
fire.
Since the display panel is hot after using it for a
long time, do not touch the product.
This will alleviate any eye strain.
Major Safety Precautions
Downloaded from ManualMonitor.com Manuals
1-3
Keep small accessories away from the children.
Take care when adjusting the angle of the
product or the height of the stand.
•
If your hand or finger is caught, you may be
injured.
•
If the product is tilted excessively, the
product may fall and this may result in
injury.
Avoid placing a heavy object over the product.
•
Otherwise, it may result in a problem with
the product or injury.
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product.
•
Straighten your back.
•
Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and
face the screen forwards.
•
Maintain the correct posture when using this product.
•
Adjust the angle of the product so that light is not reflected onto the screen.
•
Keep your elbow at a right angle and keep your arm level with the back of your hand.
•
Keep your elbow at a right angle.
•
Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or
higher and maintain the position of your arm so that your arm is below your heart.
1-3
Downloaded from ManualMonitor.com Manuals
Major Safety Precautions
2
Installing the Product
2-1
Package Contents
•
Unpack the product and check if all of the following contents have been included.
•
Store the packaging box in case you need to move the Product at a later stage.
Monitor
CONTENTS
Installation Manual
Product Warranty
User Manual
D-Sub Cable
Power Cord
Cleaning Cloth
Cable Arrangement Link
Stand Connector
Stand
OPTIONAL PARTS
DVI Cable
The cleaning cloth is supplied with black high-glossy models only.
Installing the Product
Downloaded from ManualMonitor.com Manuals
2-1
2-2
Installing the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
Insert the Stand Connector into the Stand in the direction shown by the figure.
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Place a soft cloth over the table to protect the product and place the product onto the
cloth so that the front of the product is facing downwards.
2-2
Downloaded from ManualMonitor.com Manuals
Installing the Product
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in
the figure.
- Caution
Do not lift the product holding only the stand
Installing the Product
Downloaded from ManualMonitor.com Manuals
2-2
2-3
Removing the Stand
Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards.
Place a soft cloth over the table to protect the product and place the product onto the
cloth so that the front of the product faces downwards.
Hold the main body of the product with your hand as shown by the figure.
Pull the stand in the direction of the arrow as shown in the figure to separate it.
Turn the connecting screw at the bottom of the stand to separate it.
Take the Stand Connector out of the Stand by pulling it in the direction of the arrow as
shown in the figure.
2-3
Downloaded from ManualMonitor.com Manuals
Installing the Product
2-4
Installing the Stand for the Wall Mount
This product provides a stand mount of 75 mm x 75 mm that complies with the VESA specifications.
A. Stand Mount
B. Stand (Optional)
1. Turn the product off and unplug the power cord from the wall outlet.
2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of
the product faces downwards.
3. Separate the stand.
4. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand,
wall mount stand or another stand) and firmly fix the stand by fastening the screw.
•
If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.
•
For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ
depending on the corresponding specifications.
•
Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using
excessive force.
This may result in damage to the product or injury due to the product falling.
The company shall not be held liable for any damage or injury.
•
The company shall not be held liable for any damage to the product or injury caused by using a stand that is not
compatible with the specified specifications or due to an installation not performed by an authorized installation
engineer.
•
When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of space from the
wall.
•
The company shall not be held liable for any problems caused by using a stand that is not compatible with the specified
specifications.
•
Use the wall mount according to the international specifications.
Installing the Product
Downloaded from ManualMonitor.com Manuals
2-4
2-5
Connecting with a PC
The connecting part may differ depending on the product model.
1. Connect the product to a PC depending on the video output supported by the PC.
•
When the graphics card provides D-Sub (analog) output
•
•
Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.
When the graphics card provides DVI (digital) output
•
Connect the [DVI IN] port of the product to the DVI port of the PC with the DVI cable.
2. Connect one end of the power cord to the [POWER] port of the product and connect the other end of the power cord to the
220V or 110V wall outlet.
(The input voltage is switched automatically.)
When the product is connected to a PC, you can turn the product on and use it.
When both the DVI (<Digital>) and D-Sub (<Analog>) cables are connected, you can select the input signal <Analog/
2-5
Downloaded from ManualMonitor.com Manuals
Installing the Product
Digital> by pressing the
button.
Installing the Product
Downloaded from ManualMonitor.com Manuals
2-5
2-6
Kensington Lock
Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information,
refer to the User Manual supplied with the locking device. You have to purchase an additional locking device.
Locking the product
1. Insert the locking part of the locking device into the hole of the Kensington lock of the product and turn it in the locking
direction.
2. Connect the Kensington lock cable.
3. Tie the Kensington lock cable to a desk or heavy object.
You can purchase the locking device from an electronics store, an online shop, or our service center.
2-6
Downloaded from ManualMonitor.com Manuals
Installing the Product
3
Using the product
3-1
Setting the Optimal Resolution
If you turn the power on after purchasing the product, a message regarding the optimal resolution setting appears on the screen.
Select a language and the optimal resolution.
▲/▼ : You can select a language with these buttons.
MENU : If you press this button, the message disappears.
•
The message appears up to 3 times if the resolution has not been set to the optimal resolution.
•
To set the resolution to the optimal resolution
•
When the PC is turned off, connect the product and the PC and turn the power on.
•
Right-click over the Desktop and select 'Properties' from the pop-up menu.
•
In the 'Settings' tab, set the resolution to the optimal resolution.
Using the product
Downloaded from ManualMonitor.com Manuals
3-1
3-2
Standard Signal Mode Table
The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent
characteristics of the panel, unlike for a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
P1950W
DISPLAY MODE
HORIZONTAL
FREQUENCY (KHZ)
VERTICAL
FREQUENCY (HZ)
PIXEL CLOCK (MHZ)
SYNC POLARITY (H/
V)
IBM, 640 x 480
31.469
59.940
25.175
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
DISPLAY MODE
HORIZONTAL
FREQUENCY (KHZ)
VERTICAL
FREQUENCY (HZ)
PIXEL CLOCK (MHZ)
SYNC POLARITY (H/
V)
IBM, 640 x 480
31.469
59.940
25.175
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
P2050 / P2050G
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 X 1024
63.981
60.020
108.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 900
60.000
60.000
108.000
+/+
P2250 / P2250G / P2350 / P2350G
3-2
Downloaded from ManualMonitor.com Manuals
Using the product
DISPLAY MODE
HORIZONTAL
FREQUENCY (KHZ)
VERTICAL
FREQUENCY (HZ)
PIXEL CLOCK (MHZ)
SYNC POLARITY (H/
V)
IBM, 640 x 480
31.469
59.940
25.175
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 X 960
60.000
60.000
108.000
+/+
VESA, 1280 X 1024
63.981
60.020
108.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 1200
75.000
60.000
162.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA, 1920 x 1080
66.587
59.934
138.500
+/-
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product
Downloaded from ManualMonitor.com Manuals
3-2
3-3
Installing the Device Driver
If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is
included on the CD-ROM supplied with the product. If the supplied drive file is corrupted, please visit a service center or
Samsung Electronics website(http://www.samsung.com/), and download the driver.
1. Insert the driver installation CD-ROM into the CD-ROM drive.
2. Click on "Windows Driver".
3. Select the model of your product from the model list.
4. Complete the remaining installation steps according to the instructions displayed on the screen.
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information,
refer to the document about the Windows operating system.
3-3
Downloaded from ManualMonitor.com Manuals
Using the product
3-4
Product Operating Buttons
Product Operating Buttons
Touch one of the operating buttons lightly.
The LED buttons appear.
ICON
MENU
DESCRIPTION
Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu
* OSD Adjustment Lock
This function locks the OSD in order to maintain the current settings or to prevent the settings
from being changed by another person
On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock
function is activated.
Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment
Lock function is disabled.
Even if the OSD Adjustment Lock function is activated, users can adjust the brightness
and contrast and can set up the adjustment function assigned to the [ ].
▲/▼
Use these buttons to navigate the menu or to adjust a value in the OSD.
Users can set the Customized Key to one of the following functions. If the user presses the
Customized Key[ ] after setting it, the configured function will be performed
<MagicBright> - <MagicColor> - <Color Effect> - <Image Size>
You can set the function of the Customized Key by selecting "SETUP&RESET ->
Customized Key" in the OSD.
Use this button to control the brightness of the screen.
Use this button to select a function.
If you press the [
] button when there is no OSD, the input signal (analog/digital) is
switched. When the input signal is switched by pressing [
] button or the product is
turned on, a message displaying the selected input signal appears at the top left of the
screen.)
To select digital mode, you have to connect the product and the PC with the DVI cable.
Using the product
Downloaded from ManualMonitor.com Manuals
3-4
ICON
AUTO
DESCRIPTION
Press [AUTO] button to adjust the screen settings automatically
This function is only available in analog mode.
If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed.
Press this button to turn the product on or off
•
The buttons on the right of the product are touch-type buttons.
•
Touch the buttons lightly with your finger.
Power LED
This LED is turned on when the product works normally.
For more information on the power-saving function, refer to the power saving function
in More Information. When not using the product for a long time, unplugging the power
cord is recommended to minimize power consumption.
3-4
Downloaded from ManualMonitor.com Manuals
Using the product
3-5
Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
TOP MENUS
PICTURE
COLOR
SIZE & POSITION
SUB MENUS
Brightness
Contrast
Fine
Response Time
Sharpness
MagicBright
Coarse
MagicColor
Red
Green
Blue
Color Tone
Color Effect
Gamma
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
Reset
Menu Transparency
Language
LED On/Off
LED Brightness
Off Timer On/Off
Off Timer Setting
Auto Source
PC/AV Mode
Display Time
SETUP&RESET
Customized Key
INFORMATION
PICTURE
MENU
Brightness
DESCRIPTION
Controls the screen brightness.
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.
Contrast
Controls the contrast of the pictures displayed on the screen
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Sharpness
Controls the clarity of details of pictures displayed on the screen
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Using the product
Downloaded from ManualMonitor.com Manuals
3-5
MENU
MagicBright
Coarse
DESCRIPTION
Provides preset picture settings optimized for various user environments such as editing a document,
surfing the Internet, playing games, watching sports or movies and so on.
•
<Custom>
If the preset picture modes are not sufficient, users can configure the <brightness> and
<Contrast> directly using this mode.
•
<Text>
This mode provides the picture setting appropriate for editing a document.
•
<Internet>
This mode provides the picture setting appropriate for surfing the Internet (text + picture).
•
<Game>
This mode provides the picture setting appropriate for playing games that include lots of graphics
and that require a fast screen refresh rate.
•
<Sport>
This mode provides the picture setting appropriate for watching sports games that include lots of
movement.
•
<Movie>
This mode provides brightness and sharpness settings similar to those of a TV for the best
entertainment environment (movie, DVD, etc.).
•
<Dynamic Contrast>
Controls the picture contrast automatically so that bright and dark pictures are balanced overall.
Removes vertical noise lines (line pattern) from the screen.
The location of the screen may be changed after the adjustment. In this case, move the screen so
that the screen is displayed at the center of the display panel using the <H-Position> menu.
This function is only available in analog mode.
Fine
Removes horizontal noise lines (line pattern) from the screen.
If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then
use the <Fine> function again.
This function is only available in analog mode.
Response Time
Accelerates the response time of the LCD panel faster than the original response time so that moving
pictures appear sharper and more natural.
•
<Normal>
•
<Faster>
•
<Fastest>
It is recommended setting the Normal or Faster when not viewing a movie.
COLOR
3-5
Downloaded from ManualMonitor.com Manuals
Using the product
MENU
MagicColor
Red
DESCRIPTION
Expresses natural colors more clearly without changing the picture quality using proprietary digital
picture quality improvement technology developed by Samsung Electronics.
•
<Off> - Turns the MagicColor function off.
•
<Demo> - You can compare the pictures processed by MagicColor with the original pictures.
•
<Full> - Provides a clearer picture including areas corresponding to skin color.
•
<Intelligent> - Improves the chroma of pictures except for areas corresponding to skin color.
You can adjust the red color value of pictures according to your preference.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Green
You can adjust the green color value of pictures according to your preference.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Blue
You can adjust the blue color value of pictures according to your preference.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Color Tone
You can set the color temperature according to your preference.
•
<Cool> - Sets the color temperature of the screen to a cooler color.
•
<Normal> - Sets the color temperature of the screen to the standard color temperature.
•
<Warm> - Sets the color temperature of the screen to a warmer color.
•
<Custom> - Select this menu to set the color temperature manually.
If you do not like the preset color temperatures, you can manually adjust the colors of <Color
Effect>.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Color Effect
You can change the overall atmosphere by changing the color of pictures.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Gamma
•
<Off> - Turns the color effect function off.
•
<Grayscale> -Displays pictures in black and white.
•
<Green> - Displays pictures in green mono color.
•
<Aqua> - Displays pictures in aqua mono color.
•
<Sepia> - Displays pictures in sepia mono color.
Using this menu, you can change the intensity of the colors of medium brightness.
(This is unavailable when MagicBright is set to <Dynamic Contrast> mode.)
SIZE & POSITION
Using the product
Downloaded from ManualMonitor.com Manuals
3-5
MENU
H-Position
DESCRIPTION
Moves the position of the display area on the screen horizontally.
This function is only available in analog mode.
V-Position
Moves the position of the display area on the screen vertically.
This function is only available in analog mode.
Image Size
PC signals
•
<Auto> - The picture is displayed at the aspect ratio of the input signal.
•
<Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
•
A signal not in the standard mode table is not supported.
•
If the resolution is set to the optimal resolution, the aspect ratio does not change whether
the <Image Size> is set to <Auto> or <Wide>.
AV signals
•
<4 : 3> - Displays pictures at the 4 : 3 aspect ratio.
•
<16 : 9> - Displays pictures at the 16 : 9 aspect ratio.
•
<Screen Fit> - If a 720P, 1080i or 1080P signal is input in DVI input mode, the picture is displayed
as is without truncation.
This can only be set when the external input is connected through DVI and <PC/AV Mode> is
set to <AV>.
Menu H-Position
You can adjust the horizontal position of the OSD.
Menu V-Position
You can adjust the vertical position of the OSD.
SETUP&RESET
MENU
Reset
DESCRIPTION
Use this function to restore the visual quality and color settings to the factory defaults.
•
Menu Transparency
<No> - <Yes>
You can select the transparency of the OSD.
•
<Off> - <On>
3-5
Downloaded from ManualMonitor.com Manuals
Using the product
MENU
Language
DESCRIPTION
Select a language for the OSD.
The selected language is only applied to the product OSD. This setting does not affect the other
functions of the PC.
LED On/Off
Turns the Menu button LED on or off.
•
<Off> - Turns the Power button LED lamp off.
•
<On> - Turns the Power button LED lamp on.
LED Brightness
Adjusts the brightness of the Menu button LED in levels.
Off Timer On/Off
You can turn the Off Timer on or off.
Off Timer Setting
Turns the power off automatically when the configured time is reached.
Auto Source
•
<Auto> - The monitor automatically selects an input signal.
•
<Manual> - Users have to manually select an input signal.
•
PC/AV Mode
<Off> - <On>
Set to PC when connected to a PC.
Set to AV when connected to an AV device.
This function does not support analog mode.
Display Time
The OSD automatically disappears if no action is taken by the user.
You can determine the time to wait before the OSD is hidden.
•
Customized Key
<5 sec> - <10 sec> - <20 sec> - <200 sec>
You can set the function of the Customized Key to one of the following.
•
<MagicBright> - <MagicColor> - <Color Effect> - <Image Size>
INFORMATION
MENU
INFORMATION
DESCRIPTION
Shows the frequency and resolution set on the PC.
Using the product
Downloaded from ManualMonitor.com Manuals
3-5
4
Installing the Software
4-1
Natural Color
What is Natural Color ?
This software works only for Samsung products and enables adjusting the displayed colors on the product and matches the
colors on the product with the colors of the printed pictures. For more information, refer to the online help of the software (F1).
The Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html
4-1
Downloaded from ManualMonitor.com Manuals
Installing the Software
4-2
MagicTune
What is MagicTune?
MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor
functions and easy-to-understand guidelines.
Users can adjust the product with the mouse and the keyboard without using the operating buttons of the product.
Installing the Software
1. Insert the installation CD into the CD-ROM drive.
2. Select the MagicTune setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MagicTune setup file on the CD-ROM.
3. Select the installation language and click [Next].
4. Complete the remaining software installation steps according to the instructions displayed on the screen.
•
The software may not work properly if you do not restart the computer after the installation.
•
The MagicTune icon may not appear depending on the computer system and the product specifications.
•
If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MagicTune™)
The installation of MagicTune™may be affected by the graphics card, motherboard and the networking environment.
System Requirements
OS
•
Windows 2000
•
Windows XP Home Edition
•
Windows XP Professional
•
Windows Vista
For MagicTune™, Windows 2000 or later is recommended.
Hardware
•
At least 32MB of memory
•
At least 60MB of free space on the hard disk drive
For more information, refer to the website.
Removing the Software
You can only remove MagicTune™through [Add or Remove Programs ] in Windows.
To remove MagicTune™, complete the following steps.
1. Click [Start] select [Settings], and select [Control Panel] from the menu.
For Windows XP, click [Start], and select [Control Panel] from the menu.
2. Double-click the [Add or Remove Programs] icon in the Control Panel.
Installing the Software
Downloaded from ManualMonitor.com Manuals
4-2
3. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.
4. Click [Change or Remove Programs] to remove the software.
5. Select [Yes] to start removing MagicTune™.
6. Wait until a message box appears informing you that the software has been removed completely.
For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™,
please visit our website.
4-2
Downloaded from ManualMonitor.com Manuals
Installing the Software
4-3
MultiScreen
What is MultiScreen ?
MultiScreen enables users to use the monitor by partitioning multiple sections.
Installing the Software
1. Insert the installation CD into the CD-ROM drive.
2. Select the MultiScreen setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MultiScreen setup file on the CD-ROM.
3. When the Installation Wizard appears, click [Next].
4. Complete the remaining software installation steps according to the instructions displayed on the screen.
•
The software may not work properly if you do not restart the computer after the installation.
•
The MultiScreen icon may not appear depending on the computer system and the product specifications.
•
If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MultiScreen)
The MultiScreen installation may be affected by the graphics card, motherboard and the networking environment.
Operating System
OS
•
Windows 2000
•
Windows XP Home Edition
•
Windows XP Professional
•
Windows Vista
For MultiScreen, the operating systems Windows 2000 or later is recommended.
Hardware
•
At least 32MB of memory
•
At least 60MB of free space on the hard disk drive
Removing the Software
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].
Select MultiScreen from the program list and click the [Add/Delete] button.
Installing the Software
Downloaded from ManualMonitor.com Manuals
4-3
5
Troubleshooting
5-1
Monitor Self-Diagnosis
•
You can check if the product is working properly using the Self-Diagnosis function.
•
If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform
the self-diagnosis function according to the procedures below.
1. Turn the product and the PC off.
2. Separate the D-Sub cable from the product .
3. Turn the product on.
4. If the product is working properly, the 'Check Signal Cable' message appears.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The
product is working properly.
5-1
Downloaded from ManualMonitor.com Manuals
Troubleshooting
5-2
Before Requesting Service
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest
Samsung Electronics Service Center.
A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON
Is the power cord connected properly?
Check the connection status of the power cord.
Is the “Check Signal Cable” message displayed on the
screen?
Check the cable connecting the PC and the product.
Is the “Not Optimum Mode” message displayed on the
screen?
This occurs when the signal from the graphics card exceeds
the maximum resolution or the maximum frequency of the
product.
If the message appears on the screen even if the cable is
properly connected, recheck the input signal by pressing the
button of the product.
In this case, set up the appropriate resolution and the frequency for the product.
Is a blank screen displayed and does the power LED blink at
a 1 second interval?
This occurs when the power saving function is running.
Did you connect with a DVI cable?
If you connect the DVI cable when the PC has booted up or if
you reconnect the DVI cable after disconnecting the cable
while using a PC, the screen may not be displayed because
some graphics cards do not output the video signal.
If you click the mouse or press any key, the screen will be
turned on.
In this case, reboot the PC while the DVI cable is connected.
THE ON SCREEN ADJUSTMENT MENU (OSD) DOES NOT APPEAR.
Did you cancel the screen adjustment?
Check if the <OSD Adjustment Lock> function is set to Off.
THE COLOR IS WEIRD / THE PICTURE IS DISPLAYED IN BLACK AND WHITE
Is the entire screen displayed in the same color as if viewing
the screen through a cellophane paper?
Check the cable connection to the computer.
Is the graphics card configured correctly?
Set up the graphics card referring to the user manual.
Reinsert the graphics card into the computer completely.
Check if the <Color Effect> is set to <Off>.
THE DISPLAY AREA SUDDENLY MOVES TO AN EDGE OR TO THE CENTER.
Did you change the graphics card or the driver?
Please press the [AUTO] button to run the auto adjustment
function.
Did you change the resolution and frequency appropriate to
the product?
Set the resolution and the frequency to the appropriate values
in the graphics card
refer to the (Standard Signal Mode Table)
Is the graphics card configured correctly?
Set up the graphics card referring to the user manual.
THE PICTURES ARE OUT-OF-FOCUS.
Did you change the resolution and the frequency appropriate
to the product?
Set the resolution and the frequency to the appropriate values
in the graphics card
refer to the (Standard Signal Mode Table)
Troubleshooting
Downloaded from ManualMonitor.com Manuals
5-2
THE COLOR IS DISPLAYED IN 16 BIT (16 COLORS). THE COLOR HAS BEEN CHANGED AFTER CHANGING THE
GRAPHICS CARD.
Did you install the device driver for the product?
Windows ME/XP/2000 : Set the color again by selecting Control Panel → Display → Settings.
Is the graphics card configured correctly?
Configure the color again in accordance with the new graphics card driver.
WHEN I CONNECT THE MONITOR, THE 'UNKNOWN MONITOR, PLUG&PLAY (VESA DDC) MONITOR FOUND'
MESSAGE IS DISPLAYED.
Did you install the device driver for the product?
Install the device driver referring to the descriptions about the
driver installation.
Check if all the Plug&Play (VESA DDC) functions are supported referring to the User Manual of the graphics card.
Install the device driver referring to the descriptions about the
driver installation.
WHEN I LOOK AT THE EXTERIOR EDGES OF THE PRODUCT, SMALL ALIEN SUBSTANCES APPEAR ON IT.
Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black
edges, such things may be seen. This is not a defect of the product.
A “BEEP, BEEP” SOUND IS HEARD WHEN BOOTING THE COMPUTER.
If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.
5-2
Downloaded from ManualMonitor.com Manuals
Troubleshooting
5-3
FAQ
FAQ!
How can I change the frequency of the video signal?
PLEASE TRY THE FOLLOWING!
You have to change the frequency of the graphics card.
(For more information, refer to the User Manual of the computer or the graphics card.)
How can I change the resolution?
Windows XP : Change the resolution by selecting Control
Panel → Appearance and Themes → Display → Settings.
Windows ME/2000 : Change the resolution by selecting Control Panel
→ Display → Settings.
(For more information, refer to the User Manual of the computer or the graphics card.)
How can I use the power saving function?
Windows XP : Configure it by selecting Control Panel →
Appearance and Themes → Display → Screen Saver Setting or configure it in the BIOS Setup of the computer.
Windows ME/2000 : Configure it by selecting Control Panel
→ Display → Screen Saver Setting or Configure
it in the
BIOS Setup of the computer.
For more information, refer to the Windows user manual for
the computer.
Troubleshooting
Downloaded from ManualMonitor.com Manuals
5-3
6
More Information
6-1
Specifications
MODEL NAME
LCD
Panel
Synchronization
P1950W
P2050 / P2050G
P2250 / P2250G
P2350 / P2350G
Size
19 inch (48 cm)
20 inch (50 cm)
21.53 inch (54 cm)
23 inch (58 cm)
Display area
408.24 mm (H) X
255.15 mm (V)
442.8 mm (H) X
249.075 mm (V)
476.64 mm (H) X
268.11 mm (V)
509.73 mm (H) X
286.74 mm (V)
Pixel Pitch
0.2835 mm (H) X
0.2835 mm (V)
0.2768 mm (H) X
0.2768 mm (V)
0.248 mm (H) X 0.248
mm (V)
0.2655 mm (H) X
0.2655 mm (V)
Horizontal
30~81 kHz
Vertical
56~75 Hz
56~60 Hz
Display Color
16.7M
Resolution
Optimum resolution
1440 X 900 @ 60 Hz
(RB)
1600 X 900 @ 60 Hz
(RB)
1920 X 1080 @ 60 Hz
(RB)
1920 X 1080 @ 60 Hz
(RB)
Maximum resolution
1440 X 900 @ 60 Hz
(RB)
1600 X 900 @ 60 Hz
(RB)
1920 X 1080 @ 60 Hz
(RB)
1920 X 1080 @ 60 Hz
(RB)
RGB Analog, DVI(Digital Visual Interface)
Input Signal, Terminated
0.7 Vp-p ± 5 %
Separate H/V sync, Composite, SOG
TTL Level (V high ≥ 2.0 V, V low ≤ 0.8 V)
Maximum Pixel Clock
165 MHz (Analog, Digital)
164 MHz (Analog, Digital)
Power Supply
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz
Signal Cable
15pin-to-15pin D-sub cable, Detachable
DVI-D to DVI-D connector, Detachable
Dimensions (WxHxD) /
Weight (Simple stand)
Environmental
considerations
Tilt
Operating
449 x 314 x 66 mm /
17.7 x 12.4 x 2.6 inch
(Without Stand)
486.6 x 308.3 x 65 mm
/ 19.2 x 12.1 x 2.6 inch
(Without Stand)
518.2 x 327.7 x 66 mm
/ 20.4 X 12.9 X 2.6
inch (Without Stand)
555.8 x 345.0 x 63.8
mm / 21.9 X 13.6 X 2.5
inch (Without Stand)
449 x 384 x 190 mm /
17.7 x 15.1 x 7.5 inch /
4.3 kg / 9.5 Ibs (With
Stand)
486.6 x 377.3 x 189.4
mm / 19.2 x 14.9 x 7.5
inch / 4.4 kg / 9.7 Ibs
(With Stand)
518.2 x 396.7 x 189.4
mm / 20.4 X 15.6 X 7.5
inch / 4.4 kg / 9.7 Ibs
(With Stand)
555.8 x 416.2 x 189.4
mm / 21.9 X 16.4 X 7.5
inch / 5.1 kg / 11.2 Ibs
(With Stand)
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
-2° ~ 21°
Class B (Information Communication equipment for residential use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment
emits less electromagnetic waves than Class A equipment.)
6-1
Downloaded from ManualMonitor.com Manuals
More Information
6-2
Power Saving Function
This product provides a power saving function that automatically turns the screen off when the product is not used for a
predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a
different color to indicate that the product is in power saving mode.
When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key
or clicking the mouse. However, the power saving function only works when the product is connected to a computer that provides
the power saving function.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF
Power Indicator
On
Blinking
Off
Less than 1 watts
Less than 1 watts
P1950W : 34 watts
Power Consumption
P2050 / P2050G : 34 watts
P2250 / P2250G : 38 watts
P2350 / P2350G : 40 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
This product satisfies the ENERGY STAR® specifications.
More Information
Downloaded from ManualMonitor.com Manuals
6-2
6-3
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG(726-7864)
http://www.samsung.com/us
CANADA
1-800-SAMSUNG(726-7864)
http://www.samsung.com/ca
MEXICO
01-800-SAMSUNG(726-7864)
http://www.samsung.com/mx
LATIN AMERICA
ARGENTINA
0800-333-3733
http://www.samsung.com/ar
BRAZIL
0800-124-421
http://www.samsung.com/br
4004-0000
CHILE
800-SAMSUNG(726-7864)
COLOMBIA
01-8000112112
http://www.samsung.com/cl
http://www.samsung.com/co
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin
ECUADOR
1-800-10-7267
http://www.samsung.com/latin
EL SALVADOR
800-6225
http://www.samsung.com/latin
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin
HONDURAS
800-7919267
http://www.samsung.com/latin
JAMAICA
1-800-234-7267
http://www.samsung.com/latin
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin
PANAMA
800-7267
http://www.samsung.com/latin
PUERTO RICO
1-800-682-3180
http://www.samsung.com/latin
REP. DOMINICA
1-800-751-2676
http://www.samsung.com/latin
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
http://www.samsung.com/latin
VENEZUELA
0-800-100-5303
http://www.samsung.com/latin
EUROPE
AUSTRIA
0810 - SAMSUNG(7267864,€ 0.07/min)
http://www.samsung.com/at
BELGIUM
02 201 2418
http://www.samsung.com/be (Dutch)
http://www.samsung.com/be_fr
(French)
CZECH REPUBLIC
800 - SAMSUNG (800-726786)
http://www.samsung.com/cz
DENMARK
8 - SAMSUNG (7267864)
http://www.samsung.com/dk
EIRE
0818 717 100
http://www.samsung.com/ie
FINLAND
30 - 6227 515
http://www.samsung.com/fi
FRANCE
01 4863 0000
http://www.samsung.com/fr
GERMANY
01805 - SAMSUNG (7267864,€ 0.14/
Min)
http://www.samsung.de
6-3
Downloaded from ManualMonitor.com Manuals
More Information
EUROPE
HUNGARY
06-80-SAMSUNG(726-7864)
http://www.samsung.com/hu
ITALIA
800-SAMSUNG(726-7864)
http://www.samsung.com/it
LUXEMBURG
02 261 03 710
http://www.samsung.com/lu
NETHERLANDS
0900 - SAMSUNG (0900-7267864) (€
0.10/Min)
http://www.samsung.com/nl
NORWAY
3 - SAMSUNG (7267864)
http://www.samsung.com/no
POLAND
0 801 1SAMSUNG (172678)
http://www.samsung.com/pl
022 - 607 - 93 - 33
PORTUGAL
808 20 - SAMSUNG (7267864)
http://www.samsung.com/pt
SLOVAKIA
0800-SAMSUNG(726-7864)
http://www.samsung.com/sk
SPAIN
902 - 1 - SAMSUNG (902 172 678)
http://www.samsung.com/es
SWEDEN
075 - SAMSUNG (726 78 64)
http://www.samsung.com/se
SWITZERLAND
0848-SAMSUNG(7267864, CHF 0.08/
min)
http://www.samsung.com/ch
U.K
0845 SAMSUNG (7267864)
http://www.samsung.com/uk
ESTONIA
800-7267
http://www.samsung.com/ee
LATVIA
8000-7267
http://www.samsung.com/lv
CIS
LITHUANIA
8-800-77777
http://www.samsung.com/lt
KAZAKHSTAN
8-10-800-500-55-500
http://www.samsung.com/kz_ru
KYRGYZSTAN
00-800-500-55-500
RUSSIA
8-800-555-55-55
http://www.samsung.ru
TADJIKISTAN
8-10-800-500-55-500
UKRAINE
8-800-502-0000
http://www.samsung.ua
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com/kz_ru
ASIA PACIFIC
AUSTRALIA
1300 362 603
http://www.samsung.com/au
CHINA
800-810-5858
http://www.samsung.com/cn
400-810-5858
010-6475 1880
INDIA
HONG KONG:3698 - 4698
http://www.samsung.com/hk
3030 8282
http://www.samsung.com/in
1800 110011
1-800-3000-8282
INDONESIA
0800-112-8888
http://www.samsung.com/id
JAPAN
0120-327-527
http://www.samsung.com/jp
MALAYSIA
1800-88-9999
http://www.samsung.com/my
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com/nz
More Information
Downloaded from ManualMonitor.com Manuals
6-3
ASIA PACIFIC
PHILIPPINES
1800-10-SAMSUNG(726-7864)
http://www.samsung.com/ph
1800-3-SAMSUNG(726-7864)
02-5805777
SINGAPORE
1800-SAMSUNG(726-7864)
http://www.samsung.com/sg
THAILAND
1800-29-3232
http://www.samsung.com/th
02-689-3232
TAIWAN
0800-329-999
http://www.samsung.com/tw
VIETNAM
1 800 588 889
http://www.samsung.com/vn
MIDDLE EAST & AFRICA
SOUTH AFRICA
0860-SAMSUNG(726-7864)
http://www.samsung.com/za
TURKEY
444 77 11
http://www.samsung.com/tr
U.A.E
800-SAMSUNG(726-7864)
http://www.samsung.com/ae
8000-4726
6-3
Downloaded from ManualMonitor.com Manuals
More Information
6-4
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working
life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other commercial wastes for disposal.
More Information
Downloaded from ManualMonitor.com Manuals
6-4
6-4
Downloaded from ManualMonitor.com Manuals
More Information