Cyber View MU-1603 User manual

dedicated KVM switch and rackmount screen technology
User Manual
N-117 / N-119
1U 17” / 19” LCD Console Drawer
Options :
- AV / DVI-D / Audio
- Full range KVM
- DC power
Designed and manufactured by Austin Hughes
UM-CV-N117-Q411V2
www.austin-hughes.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■
■
■
■
■
■
■
■
■
■
■
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing dam
age to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being dam
aged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and invali
date its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■
■
■
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
□
□
□
□
□
□
□
□
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
UM-CV-N117-Q411V2
www.austin-hughes.com
Contents
< Part 1 > N-117
1.1
1.2
1.3
1.4
1.5
1.6
1.7
N-119
P.1
P.2
P.3 - 6
P.7
P.8
P.9 - 10
P.11
Package Contents
Structure Diagram & Dimension
Installation
Connection to External KVM Switch or Server
On-screen Display Operation ( OSD )
LCD / Keyboard / Mouse Specification
Options : DVI-D / BNC + S-Video / Audio
: DC Power
For KVM options,
please download the links below according to the KVM series and models :
For Matrix Cat6
KVM
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MUKVM-KIT.pdf
MUIP1613 / 3213
MUIP1624 / 3224
MU1602 / 3202
MU1603 / 3203
For Combo Cat6
MU1604 / 3204
KVM
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-UKVM-KIT.pdf
UIP802 / 1602 / 3202
For Matrix DB-15
U802 / 1602 / 3202
U801 / 1601 / 3201
KVM
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MKVM-KIT.pdf
MIP813 / 1613
MIP824 / 1624
M802 / 1602
M803 / 1603
For Combo DB-15
M804 / 1604
KVM
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-SKVM-KIT.pdf
IP802 / 1602
For PS/2
802 / 1602
S801 / S1601
KVM
www.austin-hughes.com/support/usermanual/cyberview/UM-CV-PS2KVM-KIT.pdf
401 / 801
UM-CV-N117-Q411V2
www.austin-hughes.com
Before Installation
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
< Part 1 >
N-117 / 119
< 1.1 > Package Content
- N-117 or N-119 X 1
- CE-6 6ft Combo KVM cable X 1
- Power cord X 1
- M6 screw, cage nut & cup washer X 6
The above package content is only for the single console models.
It varies with options such as KVM, DVI-D, AV, audio & DC power.
UM-CV-N117-Q411V2
P.1
www.austin-hughes.com
< 1.2 > Structure Diagram & Dimension
N-117 / 119
1
5
2
6
3
7
8
4
1
Carry handle to release the 2-pt lock
5
Micro switch for screen auto power off
2
LCD interchangeable module kit
6
Membrane switch (KVM option)
3
“One Man” Installation Slides
7
Keyboard interchangeable module kit
4
LCD membrane
8
Mouse interchangeable module kit
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
N-117 series
441.6 x 650 x 44.3 mm
17.4 x 25.6 x 1.74"
595 x 860 x 140 mm
23.4 x 33.9 x 5.5”
13 kg
29 lb
19 kg
42 lb
N-119 series
441.6 x 650 x 44.3 mm
17.4 x 25.6 x 1.74"
595 x 860 x 140 mm
23.4 x 33.9 x 5.5”
13 kg
29 lb
19 kg
42 lb
Model
The weight is only for the single console models. It varies with accessories & options
such as KVM, DVI-D, AV, audio & DC power.
UM-CV-N117-Q411V2
P.2
www.austin-hughes.com
< 1.3 > Installation - How to install One Man Installation Slides
Step
Rear side
Right bracket
Front side
1
■
Attach the left and right mounting bracket to rack
19” mounting rails.
■
■
Adjust the rear mounting bracket to fit your rack.
M6 screw and cup washer x 6 pcs included.
Caution : Leave the screws slightly loose,
until you complete the installation
in step 4
Left bracket
Right front
Left front
Step
Mounting bracket
■
■
■
■
2
Pick up the LCD console drawer.
Insert the LCD console drawer into the mounting
bracket.
Pull and hold the left & right black arrow buttons on
the rails.
Return the LCD console drawer to park position.
Black arrow button
Step
3
■
Attach front left and right mounting ears of the LCD
console drawer to vertical mounting rails.
■
M6 screw and cup washer x 2 pcs included.
Step
4
Complete the installation
■
UM-CV-N117-Q411V2
P.3
Tighten all 8 pcs of M6 screw to complete the
installation.
www.austin-hughes.com
< 1.3 > Installation- How to install
L-bracket
Step
N-117 / 119
1
■
Install left & right rear L-brackets with two fasteners shown
above.
■
Leave the fasteners slightly loose.
Step
2
■
Measure the depth of the front and rear mounting
rails.
■
Align each rear L-bracket to a suitable length and
tighten the fasteners.
Step
■
3
Fix the LCD console drawer into the rack.
M6 mounting screws & cage nuts are not provided.
UM-CV-N117-Q411V2
P.4
www.austin-hughes.com
< 1.3 > Installation - How to Use the Slides
Figure 1.
L
■
A black arrow release button is located on the
front of each slide. (shown in Figure 1).
Figure 2.
■
Pull and hold the black arrow button on either side
of the LCD console drawer to unlock.
(shown in Figure 2).
L
I
I
Figure 3.
■
Push the LCD console drawer into the rack.
(shown in Figure 3).
Caution : Keep your fingers away from the slide
stop
UM-CV-N117-Q411V2
P.5
www.austin-hughes.com
< 1.3 > Installation- How to use the drawer
UM-CV-N117-Q411V2
P.6
N-117 / 119
■
Pull the tab on the front handle and gently
slide out the drawer.
■
Flip up the LCD to a suitable angle.
■
Operate the LCD console drawer.
www.austin-hughes.com
< 1.4 > Connection to
PS/2 or USB Server
LCD console drawer
LCD console drawer
CE-6 Combo
KVM cable
CE-6 Combo
KVM cable
PS/2 server
USB server
< 1.4 > Connection to external KVM
LCD console drawer
LCD console drawer
CE-6 Combo
KVM cable
CE-6 Combo
KVM cable
CE-6 KVM Cable
PS/2 console KVM
KVM
USB console KVM
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
UM-CV-N117-Q411V2
P.7
www.austin-hughes.com
N-117 / 119
< 1.5 > On-screen Display Operation ( OSD )
Power light
Green = On
Orange = Power saving
Membrane Switch
Function
Power on / off LCD
Display the OSD menu
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button
for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
UM-CV-N117-Q411V2
P.8
www.austin-hughes.com
< 1.6 > LCD / Keyboard / Mouse Specification
Item
Description
LCD Manufacturer
17" TFT
19" TFT
1280 x 1024
1280 x 1024
250
250
Color Support
16.7 M
16.7 M
Contrast Ratio (typ.)
1000:1
1000:1
Viewing Angle (H/V)
160˚ x 160˚
160˚ x 160˚
338 x 270
376 x 301
5
5
50,000
50,000
Diagonal Size
Max. Resolution
Brightness (cd/m²)
Active Area (mm)
Response Time Tr + Tf (ms)
LCD Panel MTBF (hrs)
Analog RGB, 0.7Vp-p
VGA Signal Input
Sync. Type
Separate H/V, Composite, SOG
800 x 600, 60/ 70/ 72/ 75 Hz
1024 x 768, 60/ 70/ 75 Hz
1152 x 864, 60/ 70/ 75 Hz
Resolution
1280 x 720, 60/ 75 Hz
1280 x 1024, 60/ 70/ 75 Hz
EDID 1.3
Plug & Play DDC
Console Port (Combo)
Power Input
DB-15 connector for VGA / keyboard / mouse
(Combo interface)
Auto-sensing 100 to 240VAC, 50 / 60Hz
Max. 48 Watt, Standby 5 Watt
Power Consumption
Compatibility
Multi-platform - Mix PCs, SUNs, IBMs, HPs & DELLs.
FCC, CE
Regulation Approval
Environmental
0˚ to 50˚C Degree
Operation
-5˚ to 60 ˚C Degree
Storage
5~90%, non-condensing
Relative Humidity
Shock
Vibration
UM-CV-N117-Q411V2
10G acceleration (11ms duration)
5~500Hz 1G RMS random vibration
P.9
www.austin-hughes.com
N-117 / 119
< 1.6 > LCD / Keyboard / Mouse Specification
Ne
Nb
N keyboard integrated with touchpad
N keyboard integrated with trackball
Key force
55 ± 5g
Travelling distance
3 ± 0.3mm
Switch life
> 10 million life cycle time
Software support
MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC
Linux / Mac
Supporting layouts
America
United States
United Kingdom
Germany
France
Spain
Norway
Italy
Russia
Switzerland
Netherlands
Portugal
China
Japan
Korea
Arabia
Turkey
EMEA
Asia
UM-CV-N117-Q411V2
P.10
www.austin-hughes.com
< 1.7 > Options : DVI-D / BNC + S-Video / Audio / DC power
■
DVI-D Option
Option includes 1 x 6ft DVI-D cable
DVI-D
KVM
■
BNC + S-Video Option
Option includes 1 x 6ft S-Video cable
S-Video
BNC
Audio Option
■
■
KVM
Audio input is 35mm audio plug
The speaker is sharing the same power with LCD.
Audio
KVM
Speaker
Left
DC Power Option
Model
12V
24V
48V
Input rating
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
Input current
Output rating
■
Option excludes 1 x power cord
KVM
DC Power
UM-CV-N117-Q411V2
P.11
www.austin-hughes.com
Right
The company reserves the right to modify product specifications without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2011 Austin Hughes Electronics Ltd. All rights reserved.
UM-CV-N117-Q411V2
www.austin-hughes.com