Philips 32PFL3205/12 User manual

Register your product and get support at
www.philips.com/welcome
32PFL3605/12
42PFL3605/12
32PFL3205/12
EN
User Manual
Downloaded From TV-Manual.com Manuals
Model
Serial
www.philips.com/support
Österreich
0800 180 016
België/Belgique
80080190
България
00800 11 544 24
Hrvatska
01 6403 776
Česká republika
800142840
Bezplatný hovor
Danmark
3525 8759
Lokalt opkald
Lokalni poziv
Estonia
6008600
kohalik kõne tariifi
Suomi
09 2311 3415
paikallispuhelu
France
0805 025 510
numéro sans frais
Deutschland
0800 000 7520
gebührenfreier Anruf
Ελλάδα
0 0800 3122 1280
Κλήση χωρίς χρέωση
Magyarország
0680018189
Ingyenes hívás
Hrvatska
0800 222778
free
Ireland
01 601 1777
Italia
800 088774
Numero Verde
Қазақстан
+7 727 250 66 17
local
Latvia
52737691
local
Lithuania
67228896
local
Luxemburg/Luxembourg
40 6661 5644
Ortsgespräch/Appel local
Nederland
0800 0230076
Gratis nummer
Norge
22 70 81 11
Lokalsamtale
Polska
00800-311-13-18
Pozosta?e produkty RTV oraz AGD
Portugal
800 780 903
Chamada Grátis
România
0800-894910
0318107125
Apel gratuit
Apel local
Россия
(495) 961-1111
0.15 USD/minute
Србија
+381 114 440 841
Lokalni poziv
Slovensko
0800 004537
Bezplatný hovor
Slovenija
00386 12 80 95 00
lokalni klic
España
900 800 655
Teléfono local gratuito solamente para
clientes en España
Sverige
08 5792 9100
Lokalsamtal
Suisse/Schweiz/Svizzera
0800 002 050
Schweizer Festnetztarif/ Tarif réseau fixe
France
Türkiye
0800 261 3302
Şehiriçi arama
United Kingdom
General No: 0800 331 6015
General National Rate No:
0870 911 0036
free
National rate
Україна
0-800-500-697
Downloaded From TV-Manual.com Manuals
This information is correct at the time of press. For updated information, see www.philips.com/support.
7 Connect devices
1 Notice
2
2 Important
4
3 Your TV
7
7
7
8 Product information
Side controls and indicators
Remote control
4 Use your TV
Switch your TV on / off or to standby
Switch channels
Watch connected devices
Adjust TV volume
Use teletext
5 Use more of your TV
Access TV menus
Rename devices from the home menu
Remove devices from the home menu
Change picture and sound settings
Use advanced teletext features
Create and use list of favourite channels
Use the TV clock
Use timers
Use TV locks
View photos and play music from a USB
storage device
Update the TV software
Change TV preferences
Access decoder channel
Start a TV demo
Reset the TV to factory settings
6 Install channels
Automatically install channels
Manually install channels
Rename channels
Rearrange channels
25
25
27
28
29
30
Back connector
Side connector
Connect a computer
Use Philips EasyLink
Use a Kensington lock
9
9
9
10
10
10
11
11
11
11
12
14
15
16
16
17
31
31
31
31
31
31
31
32
Supported display resolutions
Multimedia
Tuner / Reception / Transmission
Remote control
Power
Supported TV mounts
Product specification
9 Troubleshooting
33
33
33
34
34
34
35
35
General TV issues
TV channel issues
Picture issues
Sound issues
HDMI connection issues
Computer connection issues
Contact us
10 Index
36
18
20
20
21
21
21
22
22
22
24
24
Downloaded From TV-Manual.com Manuals
EN
1
E n g l i sh
Contents
1 Notice
2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Warranty
• Risk of injury, damage to TV or void of
warranty! Never attempt to repair the TV
yourself.
• Use the TV and accessories only as
intended by the manufacturer.
• The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
•
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
2
EN
Downloaded
From TV-Manual.com Manuals
Pixel characteristics
This LCD product has a high number of
colour pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Compliance with EMF
Koninklijke Philips Electronics N.V. manufactures
and sells many products targeted at consumers
which, like any electronic apparatus, in
general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to
take all necessary health and safety measures
for our products, to comply with all applicable
legal requirements and to stay well within
the EMF standards applicable at the time of
producing the products.
Philips is committed to develop, produce and
market products that cause no adverse health
effects. Philips confirms that if its products are
handled properly for their intended use, they
are safe to use according to scientific evidence
available today.
Philips plays an active role in the development
of international EMF and safety standards,
enabling Philips to anticipate further
developments in standardisation for early
integration in its products.
Mains fuse (UK only)
This TV is fitted with an approved moulded
plug. Should it become necessary to replace
the mains fuse, this must be replaced with a
fuse of the same value as indicated on the plug
(example 10A).
1
2
Remove fuse cover and fuse.
The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3 Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord cable.
E n g l i sh
Copyright
®
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
All other registered and unregistered
trademarks are the property of their respective
owners.
Downloaded From TV-Manual.com Manuals
EN
3
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!
• Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
• Never place the TV, remote control or
batteries near naked flames or other heat
sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.
•
Never insert objects into the ventilation
slots or other openings on the TV.
• When the TV is swivelled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Risk of short circuit or fire!
• Never expose the remote control or
batteries to rain, water or excessive heat.
• Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
fire.
4
EN
Downloaded
From TV-Manual.com Manuals
Risk of injury or damage to the TV!
• Two people are required to lift and carry
a TV that weighs more than 25 kg.
• When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat, level
surface that can support the combined
weight of the TV and the stand.
• When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
• Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
• Ensure that no part of the TV hangs over
the edge of the surface.
• Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
• Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of overheating!
• Never install the TV in a confined space.
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
• Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
Disposal of your old product and
batteries
E n g l i sh
Risk of injury, fire or power cord damage!
• Never place the TV or any objects on the
power cord.
• To disconnect the TV power cord easily
from the power outlet, ensure that you
have full access to the power cord at all
times.
• When you disconnect the power cord,
always pull the plug, never the cable.
• Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
• Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
• If the TV is transported in temperatures
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Screen care
•
•
•
•
•
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,
wipe off water drops as soon as possible.
Downloaded From TV-Manual.com Manuals
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
EN
5
Energy efficiency features
•
Ambient light sensor (Available in
selected models only)
To save energy, the built-in Ambient
light sensor lowers the brightness of the
TV screen when the surrounding light
darkens.
• Energy saving
The energy saving setting of the TV
combines several TV settings that result
in saving energy. See the smart settings in
the setup menu.
• Low standby power consumption
The class-leading and highly advanced
power circuitry brings down the power
consumption of the TV to an extremely
low level, without losing out on the
constant standby functionality.
Power management (Available in selected
models only)
The advanced power management of this TV
ensures the most efficient use of its energy.
You can check how your personal TV settings,
the level of brightness in current onscreen
pictures and the surrounding light conditions
determine the relative power consumption.
End of use
To inform yourself on the correct disposal
of the TV and batteries, refer to ‘Disposal of
your old product and batteries’ in the user
manual (see ‘Disposal of your old product and
batteries’ on page 5).
6
EN
Downloaded
From TV-Manual.com Manuals
3 Your TV
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your TV at
www.philips.com/welcome.
1
2
22
21
20
This section gives you an overview of
commonly used TV controls and functions.
E n g l i sh
Remote control
19
3
4
5
6
7
8
Side controls and indicators
18
9
17
10
11
16
12
1
2
3
13
4
5
a
+/-: Increases or decreases volume.
b
(Home): Toggles the home menu on
or off.
15
14
c P/CH +/-: Switches to the next or
previous channel.
d
(Power): Switches the product on
or off. The product is not powered
off completely unless it is physically
unplugged.
e Standby indicator and remote control
sensor.
Downloaded From TV-Manual.com Manuals
EN
7
a
•
•
b
(Standby-On)
Switches the TV to standby if it is on.
Switches on the TV if it is in standby.
MENU
Toggles the main menu on or off.
c MHEG/TELETEXT
Toggles teletext on or off.
d
SOURCE
Selects connected devices.
o
SOUND (Smart Sound)
Launches the sound menu.
p
+/- (Volume +/-)
Increases or decreases volume.
q
•
•
r
e Colour buttons
Selects tasks or options.
f AD (Audio Descriptor) (For RF Digital
TV only)
UK only: Enables audio commentary for
the visually handicapped.
g
OPTIONS
Accesses options relating to the current
activity or selection.
h OK
Confirms an entry or selection and
displays the channel grid, when watching
TV.
i
BACK P/P (Previous channel)
Returns to a previous screen.
Returns to the previously viewed
channel.
GUIDE
Switches between channel grid and
programme list.
s SUBTITLE (For RF Digital TV only)
Enables or disables subtitles.
t DEMO (Used in selected models only)
Toggles the demonstration menu on or
off.
u
FORMAT
Selects a picture format.
v
INCR. SURR
Enables Incredible Surround for stereo
sources. Enables spatial mode for mono
sources.
(Navigation buttons)
Navigates menus.
Remote control usage
j
INFO
Displays program information, when
available. If the information spans multiple
pages, press OPTIONS to go to the next
page.
When using the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight
between the remote control and TV is not
blocked by furniture, walls or other objects.
k
(Mute)
Mutes or restores volume.
l P +/- (Programme +/-)
Switches to the next or previous channel.
When the TV menu is on, this functions
as Page Up / Down.
m 0-9 (Numeric buttons)
Selects a channel or setting.
n
PICTURE (Smart picture)
Launches the picture menu.
8
EN
Downloaded
From TV-Manual.com Manuals
~5m
~30˚
Switch channels
•
This section helps you perform basic TV
operations.
Switch your TV on / off or to
standby
•
•
•
Press P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the
Numeric buttons.
Press OK to use the channel grid.
Press
BACK P/P on the remote
control to return to the previous channel.
Note
• When you use a favourite list, you can only
select those channels in the list (see ‘Select a
favourite list’ on page 15).
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
To switch on
• If the standby indicator is off, press
(Power) at the side of the TV.
• If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
• Press (Standby-On) on the remote
control.
» The standby indicator switches to red.
To switch off
• Press (Power) at the side of the TV.
» The standby indicator switches off.
1
Press OK.
» The channel grid appears.
2
Press
channel.
3
Press OK to watch the selected channel.
to select and preview a
Tip
• Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
Note
• If you cannot locate your remote control and
want to switch on the TV from standby, press
P/CH +/- on the side of the TV.
Downloaded From TV-Manual.com Manuals
EN
9
E n g l i sh
4 Use your TV
Watch connected devices
Use teletext
Note
• Switch on the device before selecting it as a
source on the TV.
Use the source button
1
Press
SOURCE.
» The source list appears.
2
3
Press
1
Press MHEG/TELETEXT.
» The main index page appears.
2
Select a page as follows:
• Press the Numeric buttons to enter
a page number
• Press P +/- to view the next or
previous page
• Press the Colour buttons to select a
colour coded item
• Press
BACK to return to a
previously viewed page
3
Press MHEG/TELETEXT to exit teletext.
to select a device.
Press OK to confirm your choice.
» The TV switches to the selected
device.
Adjust TV volume
To increase or decrease volume
• Press
+/-.
To mute or unmute sound
• Press to mute the sound.
• Press again to restore the sound.
10 EN
Downloaded
From TV-Manual.com Manuals
Rename devices from the
home menu
After adding a new device to the home menu,
you can rename it to your preference.
Access TV menus
Menus help you to install channels, change
picture and sound settings and access other
features.
1
Press MENU.
» The menu screen appears.
Watch TV
Add new device
Setup
1
2
3
Press
Press
MENU.
to select a device to rename.
Press OPTIONS.
» The options menu appears.
4
Press
to select [Rename device], then
press OK.
» A text input box appears.
5
6
7
Press
to select characters.
Press OK to confirm each character.
Select [Done], then press OK to finish
renaming devices.
Note
• The device name can be up to six characters
long.
• Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
2
3
4
Press
to select and navigate
through one of the following menus.
• [Watch TV]: Switches back to the
aerial source if another source is
selected.
• [Add new device]: Adds new devices
to the home menu.
• [Setup]: Accesses menus to change
picture, sound and other settings.
Press OK to confirm your choice.
Press
MENU to exit.
Tip
• After selecting [Add new device], follow the
on-screen instructions to select the correct
device and connector.
Downloaded From TV-Manual.com Manuals
Remove devices from the
home menu
If a device is no longer connected to the TV,
remove it from the home menu.
1
2
3
4
5
Press
Press
Press
MENU.
to select a device to remove.
OPTIONS.
Press
to select [Remove device], then
press OK.
Select [Remove], then press OK.
» The selected device is removed from
the home menu.
EN
11
E n g l i sh
5 Use more of
your TV
Change picture and sound
settings
Change picture and sound settings to suit your
preferences. You can apply pre-defined settings
or change settings manually.
Note
•• When watching TV or using external devices,
press OPTIONS then select [Picture and
sound] for quick access to picture and sound
settings.
Use smart picture
Use smart picture to apply pre-defined
picture settings.
1
2
3
Press PICTURE.
»» The [Smart picture] menu appears.
Press
to select one of the following
settings.
• [Vivid]: Applies rich and dynamic
settings.
• [Standard]: Adjusts picture settings
to suit most environments and types
of video.
• [Cinema]: Applies settings for movie
viewing.
• [Game]: Applies settings for games.
• [Energy saving]: Applies low-energy
settings.
• [Natural]: Applies the best picture
quality.
• [Custom]: Lists customised picture
settings.
Manually adjust picture settings
1
2
3
•
•
•
•
•
•
•
•
•
•
•
Press OK to confirm your choice.
»» The selected smart picture setting is
applied.
•
•
12 EN From TV-Manual.com Manuals
Downloaded
Press
MENU.
Press
[Picture].
to select [Setup] >
Press
to select the following
settings.
[Smart picture]: Accesses pre-defined
smart picture settings.
[Video contrast]: Adjusts the intensity
of video contents, keeping backlight
unchanged.
[Contrast]: Adjusts the intensity of
backlight areas, keeping video contents
unchanged.
[Brightness]: Adjusts the intensity and
details of dark areas.
[Colour]: Adjusts colour saturation.
[Hue]: Compensates for colour variations.
[Sharpness]: Adjusts sharpness in the
image.
[Noise reduction]: Filters and reduces
noise in an image.
[Tint]: Adjusts the colour balance in an
image.
[Custom tint]: Customises tint setting.
(Only available if [Tint] > [Custom] is
selected)
[Crystal Clear]: Fine-tunes each pixel to
match surrounding pixels. This produces a
brilliant, high-definition image.
• [Dynamic contrast]: Enhances
contrast. You can switch this feature
on or off.
• [Dynamic backlight]: Adjusts
brightness of the TV backlight to
match lighting conditions.
• [Colour enhancement]: Makes
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
[PC mode]: Adjusts the picture when a
PC is connected to the TV via HDMI or
DVI.
[Picture format]: Changes the picture
format.
•
•
[Picture size]: Adjusts the viewing area.
(when set to maximum, you might see
noise or a rough edge of an image.)
[Horizontal shift]: Adjusts the picture
horizontally for PC-VGA input.
[Vertical shift]: Adjusts the picture
vertically for PC-VGA input.
Change picture format
1
Press
FORMAT.
» A picture format bar appears.
2
Press
to select a picture format.
» The selected picture format is
activated.
3
Press OK to confirm your choice.
Summary of picture formats
The following picture settings can be
configured.
Note
• Depending on the format of the picture
source, some picture settings are not available.
[Subtitle zoom]: Displays
4:3 pictures over the full
area of the screen, with
sub-titles visible. Part of
the top of the picture is
clipped off.
[Movie expand 14:9]: (Not
for HD and PC mode.)
Scales 4:3 format to 14:9.
[Movie expand 16:9]:
(Not for HD and PC
mode.) Scales 4:3 format
to 16:9.
[Wide screen]: Scales 4:3
format to 16:9.
[Unscaled]: Available in
selected models with
PC resolution under
1024 x 768, only. Allows
maximum sharpness.
Some distortion may
be present due to the
broadcaster’s systems.
Set your PC resolution to
wide screen mode for best
results.
[Auto format]: (Not for
HDMI, YPbPr or PC mode.)
Automatically displays the
suitable picture format. If
not, widescreen is applied.
[Super zoom]: (Not
for HD and PC mode.)
Removes the black bars on
the side of 4:3 broadcasts.
There is minimal
distortion.
[4:3]: Shows the classic 4:3
format.
Downloaded From TV-Manual.com Manuals
EN
13
E n g l i sh
•
Use smart sound
•
Use smart sound to apply pre-defined sound
settings.
1 Press SOUND.
» The [Smart sound] menu appears.
•
2
3
Press
to select the following settings.
• [Standard]: Adjusts sound settings
to suit most environments and types
of audio.
• [News]: Applies settings for spoken
audio, such as news.
• [Movie]: Applies settings for movies.
• [Custom]: Applies the settings that
were customised in the sound menu.
Press OK to confirm your choice.
» The selected smart sound setting is
applied.
Manually adjust sound settings
1
2
Press
3
Press
to select the following
settings.
• [Smart sound]: Accesses pre-defined
smart sound settings.
• [Bass]: Adjusts the bass level.
• [Treble]: Adjusts the treble level.
• [Volume]: Adjusts the volume.
• [Balance]: Adjusts the balance of the
right and left speakers.
• [Dual I-II]: Selects audio languages if
dual sound broadcast is available.
• [Mono/Stereo]: Selects mono
or stereo if stereo broadcast is
available.
• [TV speakers]: Turns TV speakers
on or off. Setting TV speakers
to automatic mode turns off the
speakers when content from an
EasyLink-compliant home theatre
system is detected.(Only available if
EasyLink is switched on.)
• [Surround]: Enables spatial sound.
Use advanced teletext
features
Access the teletext options menu
Access the teletext features through the
teletext options menu.
1
Press MHEG/TELETEXT.
» The teletext screen appears.
2
Press OPTIONS.
» The teletext options menu appears.
3
Press
to select one of the following
options.
• [Freeze page]: Freezes the current
page.
• [Dual/Full screen]: Enables and
disables dual screen teletext.
• [Reveal]: Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
• [Cycle subpage]: Cycles through
subpages automatically if subpages
are available.
• [Language]: Switches to a different
language group to display a language
correctly when it uses a different
character set.
4
Press
to make a selection, then
press OK to confirm.
5
Press
BACK to exit the teletext
options menu.
MENU.
Press
to select [Setup] > [Sound].
» The [Sound] menu appears.
14 EN
Downloaded
From TV-Manual.com Manuals
[Auto volume]: Automatically
reduces sudden volume changes, for
example, when switching channels.
[Delta volume]: Levels out volume
differences between channels or
connected devices. Switch to the
connected device before you change
the delta volume.
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1
Press MHEG/TELETEXT.
» The teletext screen appears.
2
3
Press P +/- to select a teletext page.
Press
to enter a subpage.
Select T.O.P. teletext broadcasts
Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to
another without using page numbers. T.O.P.
teletext is not broadcast on all TV channels.
1
Press MHEG/TELETEXT.
» The teletext screen appears.
2
Press INFO.
» The T.O.P. overview appears.
3
4
Press
Create and use list of
favourite channels
You can create a list of your preferred TV
channels so that you can find those channels
easily.
Select a favourite list
1
When watching TV, press OK to display
the channel grid.
2
Press OPTIONS.
» The channel options menu appears.
3
Press
to select [Select list], then
press OK to enter.
» The channel list options appear.
4
Select [Favourite], then press OK.
» Only channels in the favourite list
appear in the channel grid.
to select a subject.
Press OK to view the page.
E n g l i sh
Select teletext subpages
Note
• The favourite channel grid is empty until you
add channels into the favourite lists.
View all channels
You can exit a favourite list, and view all
installed channels.
1
When watching TV, press OK.
» The channel grid appears.
2
Press OPTIONS.
» The channel options menu appears.
3
Press
to select [Select list], then
press OK or to enter.
4
Select [All], then press OK.
» All channels are displayed in the
channel grid.
Note
• All favourite channels are marked by an
asterisk when you view the channel grid.
Downloaded From TV-Manual.com Manuals
EN
15
Add a channel to a favourite list
Display the TV clock
1
When watching TV, press OK.
» The channel grid appears.
1
When watching TV, press OPTIONS.
» The TV option menu appears.
2
Press
to select a channel to add to
a favourite list.
Select [Clock].
3
2
3
Press OPTIONS.
» The channel options menu appears.
4
Select [Mark as favourite], then press
OK.
» The channel is added to the favourite
list.
Press OK.
Use timers
You can set timers to switch the TV to standby
at a specified time.
Tip
Note
• All favourite channels are marked by an
• Set the TV clock before you use timers.
asterisk in the channel grid.
Remove a channel from a favourite
list
1
When watching TV, press OK.
» The channel grid appears.
2
Press
remove.
3
4
5
Press
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-defined period of time.
Tip
to select a channel to
• You can switch off your TV earlier or reset the
sleep timer during the countdown.
OPTIONS.
Select [Unmark as fav.], then press OK.
Select [Yes], then press OK.
» The channel is removed.
Use the TV clock
1
2
1
2
Press
MENU.
Select [Setup] > [Features] > [Clock]
» The [Clock] menu appears.
3
Press
or Numeric buttons to
enter time.
4
5
Select [Done] and press OK to confirm.
Press
MENU to exit.
16 EN
Downloaded
From TV-Manual.com Manuals
MENU.
Press
to select [Setup] >
[Features] > [Sleep timer].
» The [Sleep timer] menu appears.
3
Press
to select a value between zero
and 180 minutes.
» The sleep timer can be set in steps of
five minutes. If set to zero, the sleep
timer is switched off.
4
Press OK to switch on the sleep timer.
» The TV switches to standby after the
specified time.
You can display a clock on the TV screen.
Set the TV clock
Press
You can switch on the TV from standby to a
specific channel at a specified time.
1
2
3
4
Press
MENU.
Press
to select [Setup] >
[Features] > [On timer].
Press to enter the [On timer] menu.
• [Activate]: Selects how often the TV
is switched on.
• [Time]: Sets the time to switch on
the TV.
• [Programme no.]: Selects the
channel or the connected device.
Press
MENU to exit.
Lock or unlock the TV
Lock the TV to prevent access to all channels
and connected devices.
1 Press MENU.
2 Press
to select [Setup] >
[Features] > [TV lock].
» You are prompted to enter your PIN
code.
3
Enter your code using Numeric buttons.
» The [TV lock] menu appears.
4
5
Press
to select [Lock] or [Unlock].
Press OK to confirm.
» All channels and connected devices are
locked or unlocked.
6
Press
MENU to exit.
Note
Tip
• Select [On timer] > [Activate] > [Off] to
disable this feature.
• Switch the TV off and on again for the change
to take effect.
• If you select [Lock], you have to enter your
code every time you turn on your TV.
Use TV locks
Lock or unlock one or more channels
1
When watching TV, press OK to display
the channel grid.
2
Press
unlock.
3
4
Press
Set or change your PIN code
1
2
5
For each selection, press OK to lock or
unlock the channel.
» You are prompted to enter your PIN
code.
6
Enter your code and press OK.
» If the channel is locked, a lock icon is
displayed.
You can prevent your children from watching
certain programmes or channels by locking the
TV controls.
3
Press
MENU.
Press
to select [Setup] >
[Features] > [Set code] / [Change code].
» The [Set code] / [Change code] menu
appears.
Enter your code using the Numeric
buttons.
» Follow the on-screen instructions to
create or change your PIN code.
to select a channel to lock or
OPTIONS.
Press
to select [Lock channel] or
[Unlock channel].
Tip
• If you forget your code, enter ‘8888’ to
override any existing codes.
Downloaded From TV-Manual.com Manuals
EN
17
E n g l i sh
Automatically switch the TV on (on
timer)
7
Repeat the process to lock or unlock
more channels.
Note
• Switch the TV off and on again for the change
to take effect.
• If you access the locked channels by pressing
P +/- on the remote control or from the
channel grid, you are prompted to enter your
PIN code.
View photos
1
In the USB browser, press
[Picture] folder.
2
Press
album.
3
Press OK to view a full screen image of
the photo.
to enter the
to select a photo or a photo
Tip
• When in full screen mode, press
to move
between photos.
View photos and play music
from a USB storage device
Caution
View a slide show of your photos
1
When a full screen image of a photo is
displayed, press OK.
» A slide show begins from the selected
photo.
2
Press the following buttons to control the
slide show:
• OK to pause the slide show.
•
to go back or move forward to
the next image.
•
BACK to stop the slide show.
• Philips is not responsible if the USB storage
device is not supported, nor is it responsible
for damage or loss of data from the device.
Use the USB connector to view photos or
listen to music stored on a USB storage device.
1
2
3
4
Turn on the TV.
Connect the USB storage device to the
TV.
» The home menu appears.
Press
to select [Browse USB].
Press OK to confirm.
» The USB thumbnail browser appears.
Tip
• Press
GUIDE to switch between thumbnail
and file browsing views.
18 EN
Downloaded
From TV-Manual.com Manuals
Music settings
1
When viewing a slide show, press
OPTIONS.
» The slide show options menu appears.
2
Press
to select one of the following.
• [Start Slideshow] / [Stop Slideshow]:
Starts or stops a slide show.
• [Slideshow transitions]: Sets the
transition from one picture to the
next.
• [Slideshow frequency]: Sets the
amount of time that a picture is
shown.
• [Rotate image]: Rotates a picture.
• [Show info]: Displays the picture
name, date, size and next picture in
the slide show.
When listening to music, press OPTIONS
to access one of the following music settings.
• [Start playback] / [Stop playback]: Starts
or stops the music.
• [Play mode]:
• [Play once]: Disables repeat play and
plays a song once.
• [Repeat]: Repeats a song.
• [Shuffle]: Plays songs randomly.
• [Show info]: Displays the file name.
• [Sound]: Adjusts the sound setting.
• [TV speakers]: Sets the TV speakers
on or off.(Only available if EasyLink is
switched on.)
3
Press OK to confirm your setting.
Note
• [Rotate image] and [Show info] appear only
when you press OK to pause the slideshow.
Listen to music
1
In USB browser view, select [MUSIC] and
press to enter.
2
Press
album.
3
Press OK to play the selected music.
Button
OK
/
to select a music track or
Function
Pause, resume play or stop
playback.
Go to the previous or next
music.
Downloaded From TV-Manual.com Manuals
View a slideshow with music
You can view a picture slide show with
background music.
1
2
3
4
5
Select an album of songs.
Press OK.
Press
BACK to return to the USB
content browser.
Select an album of pictures.
Press OK.
Disconnect a USB storage device
Caution
• Follow this procedure to avoid damage to your
USB storage device.
1
2
Press
BACK to exit the USB browser.
Wait for five seconds then disconnect the
USB storage device.
EN
19
E n g l i sh
Change slide show settings
Update the TV software
Change TV preferences
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Use the preferences menu to customise your
TV settings.
1
2
Press
3
4
5
Press
Check the current software version
1
2
Press
MENU.
Press
to select [Setup] >
[Software update] > [Current software].
» The TV displays the current software
information.
Download the software
1
On your PC, open a web browser and go
to www.philips.com/support.
2
Download the latest software upgrade
file to your PC.
3
4
Decompress the ZIP-file.
Copy the autorun.upg file to the root
directory of the USB device.
Update using a USB device
Connect your USB device to the USB port at
the side of your TV.
1
If the software update screen does not
appear automatically, select [Setup] >
[Software update] > [Local updates].
2
Press OK to update the TV software
manually.
3
Follow the on-screen instructions to
complete the update.
Note
• The TV restarts after the software update is
complete.
20 EN
Downloaded
From TV-Manual.com Manuals
MENU.
Select [Setup] > [Installation] >
[Preferences].
• [Location]: Optimises TV settings for
your location - home or shop.
• [Volume bar]: Displays the volume
bar when you adjust the volume.
• [EasyLink]: Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
• [Pixel Plus Link]: Overrides the
settings of connected devices and
uses the settings of the TV.(Only
available if EasyLink is switched on.)
• [E-sticker]: For shop mode only. Sets
the location of the e-sticker.
to select your preference.
Press OK.
Press
MENU to exit.
Start a TV demo
You can map channels provided through a
decoder or descrambler to your TV channel
selection. In this way, you can select these
channels by using the RC of your TV. The
decoder or a descrambler must be connected
to EXT1 (SCART).
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
Set decoder channel
3
1
2
Press DEMO on the remote control.
Press
to select a demo and press OK
to view it.
Press
BACK to exit.
Map channels from a decoder or descrambler.
1
2
Press
MENU.
Select [Setup] > [Installation] >
[Decoder].
Reset the TV to factory
settings
3
4
Press
Press
to select [Channel], then press
to enter.
5
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
Select one channel to map to the
decoder / descrambler channel and press
OK to confirm.
1
2
Press
Select [Status], then press
3
4
5
6
Press
6
7
8
9
to enter [Decoder] menu.
to enter.
Select [EXT 1] (SCART) the connector
used by the decoder / descrambler.
Press OK.
Press
MENU to exit.
MENU.
Select [Setup] > [Installation] >
[Factory settings].
to enter [Factory settings].
Select [Reset] to start resetting.
Press OK.
Press
MENU to exit.
Note
• Select [None] if you do not want to map to
the decoder / descrambler channel.
Downloaded From TV-Manual.com Manuals
EN
21
E n g l i sh
Access decoder channel
6 Install channels
The first time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fine tune channels.
Automatically install channels
This section describes how to search and store
channels automatically.
5
Select [Start], then press OK to re-install
channels.
• To stop searching, select [Stop] and
press OK.
6
Press
MENU to exit.
Manually install channels
This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
Note
Step 1 Select your menu language
• Skip this step if your system settings are
correct.
Note
• Skip this step if your language settings are
correct.
1
2
3
4
5
6
Press
MENU.
Press
to select [Setup] >
[Installation] > [Menu language].
Press
Press
to enter [Menu language].
MENU to exit.
Step 2 Select your country
Select the country where you are installing the
TV. The available channels for the country are
installed on the TV.
1
2
3
4
Press
MENU.
Select [Setup] > [Installation] >
[Channel installation] >
[Channel assistant].
» The [Channel assistant] menu appears.
Select [Yes], then press OK to enter.
Press
press
3
4
to select a language.
Press OK to confirm.
Press
1
2
to select your country, then
to go to the next step.
22 EN
Downloaded
From TV-Manual.com Manuals
5
6
Press
MENU.
Press
to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
Select [System], then press OK to enter.
Press
region.
to select your country or
Press OK to confirm.
Press
MENU to exit.
Step 2 Search and store new TV
channels
1
2
Press
MENU.
Press
to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
3
Press
to select [Search], then press
to enter.
4
Press Numeric buttons to manually enter
the three-digit frequency.
Press OK to begin search.
» If a channel is unavailable at the
selected frequency, the system searches
for the next available channel.
6
Press
found.
7
Press
to select [Store as new
channel] to store the new channel under
a new channel number.
8
9
Press
BACK when the new channel is
Skip channels
1
When watching TV, switch to the channel
you want to skip.
2
3
Press
to enter [Store as new channel].
4
Select [OK], then press OK to store the
new channel.
Press
press
5
Press
to select [Yes], then press OK
to skip current channel.
» The selected channel is skipped when
you press P +/- on your remote
control or view from the channel grid.
6
Repeat the previous steps to skip more
channels.
10 Press
MENU to exit.
Step 3 Fine-tune analogue channels
1
2
Press
MENU.
Press to select [Setup] > [Installation] >
[Channel installation] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
to select [Skip channel], then
to enter.
Tip
• Press the Numeric buttons on the remote
control to access the skipped channel.
3
Press
press
4
5
6
Press
7
8
Press
9
MENU.
Press
to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: Manual].
» The [Analogue: Manual] menu appears.
to select [Fine-tune], then
to enter.
• To access the skipped channel, repeat steps
1-5 and select [No] to restore.
to adjust frequency.
Press OK to confirm.
Press
to select [Store current
channel] to store channel number.
to enter [Store current channel].
Select [OK], then press OK to store
current channel.
Press
MENU to exit.
Downloaded From TV-Manual.com Manuals
EN
23
E n g l i sh
5
Rename channels
Rearrange channels
You can rename channels. The name appears
when you select the channel.
After you install channels, you can rearrange the
order in which they appear.
1
When watching TV, press OK to display
the channel grid.
1
When watching TV, press OK to display
the channel grid.
2
3
Select the channel to rename.
2
Press OPTIONS.
» The channel options menu appears.
Press OPTIONS.
» The channel options menu appears.
3
Press
OK.
4
Select the channel to rearrange, then
press OK.
» The selected channel is highlighted.
5
Press
to move the highlighted
channel to the desired location, then
press OK.
6
Press OPTIONS.
» [Done reordering] appears on the
screen.
7
8
Press OK to confirm.
4
5
6
7
Press
to select [Rename channel],
then press OK.
» A text input box appears.
Press
to select characters.
Press OK to confirm each character.
Select [Done], then press OK to finish
renaming channels.
Tip
• The device name can be up to six characters
long.
• Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
24 EN
Downloaded
From TV-Manual.com Manuals
Press
to select [Reorder], then press
BACK to exit the channel grid.
This section describes how to connect devices
with different connectors. Examples are
provided in the Quick Start.
a TV ANTENNA
Signal input from an antenna, cable or
satellite.
E n g l i sh
7 Connect devices
TV ANTENNA
Note
• You can use different types of connectors to
connect a device to your TV.
Back connector
Downloaded From TV-Manual.com Manuals
b EXT 1 and EXT 2 (CVBS and RGB)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
EN
25
c EXT 3 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
f HDMI 1
Digital audio and video input from highdefinition digital devices such as Blu-ray
players.
Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 28).
d PC IN (VGA and AUDIO IN)
Audio and video input from a computer.
AUDIO IN
LEFT/RIGHT
VGA/DVI
VGA
VGA
e SERV. U
For use by service personnel only.
26 EN
Downloaded
From TV-Manual.com Manuals
b VIDEO
Composite video input from analogue
devices such as VCRs.
E n g l i sh
Side connector
c HDMI
Digital audio and video input from highdefinition digital devices such as Blu-ray
players.
a AUDIO L/R
Audio input from analogue devices
connected to VIDEO.
Downloaded From TV-Manual.com Manuals
d USB
Data input from USB storage devices.
EN
27
•
Connect a computer
HDMI cable and HDMI-DVI adaptor
AUDIO IN
LEFT/RIGHT
VGA/DVI
Before you connect a computer to the TV
• Set the screen refresh rate on your
computer to 60Hz.
• Select a supported screen resolution on
your computer.
Connect a computer with one of the
following connectors:
DVI
Note
• Connections via DVI or VGA require an
additional audio cable.
•
•
HDMI cable
VGA cable
AUDIO IN
LEFT/RIGHT
VGA/DVI
VGA
DVI-HDMI cable
VGA
•
AUDIO IN
LEFT/RIGHT
VGA/DVI
DVI
28 EN
Downloaded
From TV-Manual.com Manuals
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Use one-touch play
1
E n g l i sh
Use Philips EasyLink
After enabling EasyLink, press play on
your device.
» The TV automatically switches to the
correct source.
Use one-touch standby
Note
• The EasyLink-compliant device must be
1
switched on and selected as the source.
• Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
Press (Standby-On) on the TV’s or
device’s remote control.
» The TV and all connected HDMI
devices switch to standby.
EasyLink features
Set TV speakers to EasyLink mode
One-touch play
When you connect your TV to devices that
support one-touch play, you can control your
TV and the devices with one remote control.
One-touch standby
When you connect your TV to devices that
support standby, you can use your TV remote
control to put your TV and all connected
HDMI devices in standby mode.
System audio control
When you connect your TV to HDMI
CEC compliant devices, your TV can
switch automatically to play audio from the
connected device.
To use one-touch audio, you must map the
audio input from the connected device to
your TV.
You can use the remote control from the
connected device to adjust the volume.
When you play content from an EasyLink
compliant home theater, the TV speakers are
automatically muted.
Enable or disable EasyLink
1
Enable one-touch play and one-touch
standby between your Easylink compliant
devices by following the instructions
in the previous section (see ‘Enable or
disable EasyLink’ on page 29).
2
3
Press
4
MENU.
Press
to select [Setup] > [Sound]
> [TV speakers] > [Auto EasyLink].
» The TV speakers are turned off
automatically when content from an
Easylink compliant system is detected.
Press
to select [Setup] > [Sound]
> [TV speakers] > [On] to disable
system audio control and enable the TV
speakers.
Note
Note
• To mute the TV speakers, select [TV
• Do not enable Philips EasyLink if you do not
speakers] > [Off].
intend to use it.
1
2
3
Press
MENU.
Press
to select [Setup] >
[Installation] > [Preferences] >
[EasyLink].
Select [On] or [Off].
Downloaded From TV-Manual.com Manuals
EN
29
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
30 EN
Downloaded
From TV-Manual.com Manuals
Product information is subject to change
without notice. For detailed product
information, go to www.philips.com/support.
Tuner / Reception /
Transmission
•
•
•
•
E n g l i sh
8 Product
information
Aerial input: 75ohm coaxial (IEC75)
TV system: PAL I, B/G, D/K; SECAM B/G,
D/K, L/L’
Video playback: NTSC, SECAM, PAL
Tuner Bands: Hyperband, S-channel, UHF,
VHF
Supported display resolutions
Computer formats
• Resolution - refresh rate:
• 640 x 480 - 60Hz
• 800 x 600 - 60Hz
• 1024 x 768 - 60Hz
• 1280 x 768 - 60Hz
• 1280 x 1024 - 60 Hz
• 1360 x 768 - 60Hz
• 1440 x 900 - 60Hz
• 1680 x 1050 - 60Hz
Video formats
• Resolution - refresh rate:
• 480i - 60Hz
• 480p - 60Hz
• 576i - 50Hz
• 576p - 50Hz
• 720p - 50Hz, 60Hz
• 1080i - 50Hz, 60Hz
• 1080p - 24Hz, 25Hz, 30Hz, 50Hz,
60Hz.
Multimedia
Remote control
•
•
Type: PF02E09B
Batteries: 2 x AAA (LR03 type)
Power
•
•
•
Mains power: 220-240V, 50Hz
Standby power: < 1 W
Ambient temperature: 5 to 40 degrees
Celsius
Supported TV mounts
To mount the TV, purchase a Philips TV mount
or a VESA-compatible TV mount. To prevent
damage to cables and connectors, be sure to
leave a clearance of at least 2.2 inches or 5.5cm
from the back of the TV.
Warning
• Follow all instructions provided with the TV
•
•
Supported storage device: USB (Only
FAT or FAT 32 USB storage devices are
supported)
Supported multimedia file formats:
• Images: JPEG
• Audio: MP3
Downloaded From TV-Manual.com Manuals
mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper TV
mounting that results in accident, injury or
damage.
TV screen
size
(inches)
32
42
Required Required mounting
pitch (mm) bolts
200 x 200 4 x M6 (≤ 10 mm)
300 x 200 4 x M6 (≤ 10 mm)
EN
31
Product specification
Design and specifications are subject to change
without notice.
32PFL3605/32PFL3205
• Without TV stand
• Dimension (WxHxD): 795.6 x 508.3
x 93 (mm)
• Weight: 8.3 kg
• With TV stand
• Dimension (WxHxD): 795.6 x 556.6
x 220.8 (mm)
• Weight: 9.4 kg
42PFL3605
• Without TV stand
• Dimension (WxHxD): 1018.5 x
635.7 x 83 (mm)
• Weight: 11.5 kg
• With TV stand
• Dimension (WxHxD): 1018.5 x 683
x 235.8 (mm)
• Weight: 12.8 kg
32 EN From TV-Manual.com Manuals
Downloaded
This section describes commonly encountered
issues and accompanying solutions.
General TV issues
The TV does not switch on:
•
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
•
Check that the power cable is securely
connected.
The remote control is not working properly:
•
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
•
Replace the remote control batteries if
they are flat or weak.
•
Clean the remote control and TV sensor
lens.
The standby light on the TV blinks red:
•
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
You forgot the code to unlock the TV lock
feature
•
Enter ‘8888’.
The TV menu is in the wrong language.
•
Change the TV menu to your preferred
language.
Downloaded From TV-Manual.com Manuals
When turning the TV on / off / to standby, you
hear a creaking sound from the TV chassis:
•
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools down and warms up.
This does not impact performance.
Cannot remove ‘e-sticker’ banner displayed on
the TV.
•
To remove the logos and images, set the
location of your TV to home.
1. Press MENU.
2. Select [Setup] > [Installation] >
[Preferences] > [Location].
3. Select [Home] and press OK.
TV channel issues
Previously installed channels do not appear in
the channel list:
•
Check that the correct channel list is
selected.
Some channels are not automatically installed
on my TV:
•
During installation, make sure that
you select the country where you are
installing the TV (see ‘Step 2 Select your
country’ on page 22).
EN
33
E n g l i sh
9 Troubleshooting
Picture issues
Sound issues
The TV is on, but there is no picture:
•
Check that the antenna is properly
connected to the TV.
•
Check that the correct device is selected
as the TV source.
There is sound but no picture:
•
Check that the picture settings are
correctly set.
There is poor TV reception from an antenna
connection:
•
Check that the antenna is properly
connected to the TV.
•
Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
•
If reception on only one channel is poor,
fine tune this channel.
There is poor picture quality from connected
devices:
•
Check that the devices are connected
properly.
•
Check that the picture settings are
correctly set.
The TV did not save your picture settings:
• Check that the TV location is set to the
home setting. This mode offers you the
flexibility to change and save settings.
The picture does not fit the screen; it is too
big or too small:
•
Try using a different picture format.
The picture position is incorrect:
•
Picture signals from some devices may
not fit the screen correctly. Check the
signal output of the device.
There is a picture but sound quality is poor:
34 EN
Downloaded
From TV-Manual.com Manuals
Note
• If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
•
Check that all cables are properly
connected.
•
Check that the volume is not set to 0.
•
Check that the sound is not muted.
There is a picture but the sound quality is
poor:
•
Check that the sound settings are
correctly set.
There is a picture but sound comes from one
speaker only:
•
Verify that sound balance is set to the
centre.
HDMI connection issues
There are problems with HDMI devices:
•
Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
•
If the TV does not recognise the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
•
If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
•
If you use an HDMI-to-DVI adapter
or HDMI-to-DVI cable, check that an
additional audio cable is connected to
AUDIO IN (mini-jack only).
E n g l i sh
Computer connection issues
The computer display on the TV is not stable:
•
Check that your PC uses the supported
resolution and refresh rate.
•
Set the TV picture format to unscaled.
Contact us
If you cannot resolve your problem, refer to the
FAQs for this TV at www.philips.com/support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this user manual.
Warning
• Do not attempt to repair the TV yourself. This
may cause severe injury, irreparable damage to
your TV or void your warranty.
Note
• Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
Downloaded From TV-Manual.com Manuals
EN
35
10 Index
A
analogue
fine-tune
antenna
23
25
connectors
back connectors
HDMI
overview
side connectors
USB
country
25
34, 25
25
27
18
22
D
B
back connectors
batteries
bracket for wall mount
25
31, 5
31
C
care
channel decoder
channel grid
channels
favourites list
fine-tune
grid
install
automatic
manual
list
lock
rename
reorder / rearrange
skip channels
switch
troubleshooting
tune
child lock
lock channels
lock connected devices
PIN code
clock
set
computer
connect
display resolution
connect
antenna
PC
5
21
9
15
23
9
22
22
15
17
24
24
23
9
33
23
18
17
17
16
35, 28
31
25
35, 28
36 EN
Downloaded
From TV-Manual.com Manuals
decoder
default settings
demo
devices
devices
add to home menu
connect
remove
rename
watch
digital services
teletext
disconnect USB
display
resolution
dispose
21
21
21
10
11
25
11
11
10
10, 14
20
31
5
E
EasyLink
disable
enable
one-touch play
one-touch standby
system audio control
end of life
environmental care
e-sticker
29
29
29
29
29
5
5
20
F
factory settings
favourites list
create list
view list
fine-tune channels
21
15
15
23
HDMI
home mode
O
34, 25, 27
20
I
install channels
automatic
manual
30
L
language
menu
troubleshoot
list
favourites list
location
country
home or shop
lock
Kensington lock
lock channels
lock connected devices
PIN code
22
33
15
22
20
30
18
17
17
M
menu
language
main menu
teletext
MHEG teletext
MPEG artifact reduction
multimedia
music
USB
with slideshow
mute TV speakers
16
29
29
P
22
22
K
Kensington lock
on timer
one-touch play
one-touch standby
22
11
14
10
12
31
PC
connect
resolution
picture format
change
troubleshooting
picture settings
PIN code
pixel plus link
power
power consumption
preferences
product specifications
28, 35
31
13
34
12
17
20
31
31
20
31
R
rearrange channels
reception
recycle
register product
remote control
batteries
overview
technical specifications
rename channels
reorder channels
resolution
restore default
24
34
5
7
31, 5
7
31
24
24
31
21
19
19
29
Downloaded From TV-Manual.com Manuals
EN
37
E n g l i sh
H
S
safety
screen care
settings
picture
sound
shop mode
side connectors
skip channels
slideshow
view
with music
smart picture
smart settings
smart sound
software
version
sound settings
specifications
standby
subpages in teletext
switch
channels
on and off
source
U
4
5
12
14
20
27
23
19
19
12
12, 14
14
20
14
31
9
15
9
9
10
T
Table of Pages
technical specifications
teletext
features
menu
subpages
Table of Pages
use
timer
on timer
sleep timer
standby
transmission
transporting
troubleshooting
TV lock
lock channels
lock connected devices
PIN code
TV overview
15
31
14
14
15
15
10
17
16
16
31, 33
4
33
18
17
17
7
38 EN
Downloaded
From TV-Manual.com Manuals
USB
disconnect USB
listen to music
update software
view photos
20
19
20
18
V
video format
technical specifications
volume
adjust
automatic levelling
delta
mute
31
10
14
14
10, 29
W
wall mount
4, 31
Downloaded From TV-Manual.com Manuals
EN
39
To find out on how to re-tune your TV,check
the user manual online for details
40 EN
Downloaded
From TV-Manual.com Manuals
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Downloaded From TV-Manual.com Manuals