Universal Remote CAM-DC-O Owner`s manual

Owner’s Manual
CAM-DC-O
Vandal/Weatherproof Network Camera
CAM-DC-O Vandal and Weatherproof Network Camera Owners Manual
©2013 Universal Remote Control, Inc.
The information in this Owner’s Manual is copyright protected. No part of this
manual may be copied or reproduced in any form without prior written consent from
Universal Remote Control, Inc.
Universal Remote Control, INC. shall not be liable for operational, technical or
editorial errors/omissions made in this manual.
The information in this Owner’s Manual may be subject to change without priornotice.
Total Control is a registered trademark of Universal Remote Control, Inc.
URC is a registered trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OF CONTENTS
Introduction
1
Features and Benefits
1
Parts Guide
1
CAM-DC-O Description
2
CAM-DC-O Description
3
Basic Installation
4
Communicating with the Camera
5
Navigating the Web Interface - Live View
6
Navigating the Web Interface - Admin
7
Specifications
8
Limited Warranty Statement
9
End User Agreement
12
Regulatory Information to the User
13
Declaration of Conformity
14
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
Introduction
Congratulations on your purchase of the CAM-DC-O Vandal
and Weatherproof Surveillance Dome IP Camera! The
CAM-DC-O is an outdoor IP camera that allows for seamless
viewing over the network with Total Control interfaces such as
the TRC-1280, TKP-2000, TKP-7000 and future Total Control
graphical interfaces. Once networked, it relays video to these
devices or your PC.
Features and Benefits
• Viewable on Total Control’s TRC-1280, TKP-2000, TKP7000 and Complete Control™ KP4000 / 4000C
• Viewable on PCs, iPad®, iPhone® and iPod touch®
• Uses a progressive scan CMOS sensor, H.264/MJPEG
dual encoding and transmission with simultaneous dual
streaming capabilities.
• Camera uses a PoE power supply such as the MFSPOE-8.
• The camera has a minimum Lux rating of 4.0 for color.
Parts Guide
The CAM-DC-O Vandal and Weatherproof Network Camera
includes:
1
1
1
1
1
- CAM-DC-O Outdoor Mini Dome Camera
- Attach Guide
- Bracket Screws
- Allen Wrench
- Quick Installation Manual
Page 1
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
CAM-DC-O Description
Front View
Dome
Cover
LAN connection
Dome Cover: Use the supplied allen wrench to open the
dome cover. Once it is opened, you can adjust the position of
the lens. Use a screwdriver to loosen the lens case and move
the camera lens to the desired position.
Note: If you need to focus the lens, use a Philips screwdriver to
loosen the screw and turn the lens until the image is clear.
LAN: Plug an Ethernet cable from the camera’s LAN connection
to a PoE router or switch like URC's MFS-POE8. (If a PoE
switch is not used, you must use a PoE injector to supply
power to the camera.)
Page 2
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
CAM-DC-O Description
Inside View
Reset
Reset: Pressing the “F.D” button will return the unit back to
factory default settings, including the Admin ID and
password.
Page 3
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
Basic Installation
Follow these basic steps to install the Vandal and
Weatherproof Network Camera CAM-DC-O.
1. Fasten the camera to your planned location.
2. Plug an ethernet cable to the LAN port of the camera.
Note: No separate power supply is needed as the camera
receives power via a PoE supply or a MFSPOE-8 router.
Page 4
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
Communicating with the Camera
An IP address is required to view the camera and modify
surveillance options. Once installed, locate the IP address
assigned by your router (which will differ from the default
address below). Your router contains a DHCP table which
displays each connected device and its IP address. IP
addresses normally resemble 10.20.30.40 or 192.168.1.xx.
For further information, refer to the router’s documentation.
The camera’s factory default options listed below may have
changed depending upon your router settings made by the
Custom Professional who installed your camera.
Admin ID
Admin password
IP address
Factory Default
root
root
10.20.30.40
1. Enter the camera’s IP address into the web browser’s
address bar. URC recommends using Internet Explorer
to view the live surveillance.
2. The IP camera’s web interface opens. You now have
access to the Live View and Administration sections
described next.
Page 5
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
Navigating the Web Interface - Live View
Select from the options below to modify the Live View.
Control Bar
Channel Control
Displays multiple camera streams. It modifies the primary and
secondary streams (frame rate, image size, encoding, camera name,
rate control mode, image quality and group of pictures structure)
from the Admin page (Device Configuration> Camera & Motion).
Show Full/Normal Screen
View live video in either full or normal screen. Also capture images
or video by hovering the mouse cursor over the top left corner to
reveal the Snapshot stream and Video icons. Press the Snapshot icon
to save JPEG images or the video icon to save AVI files to your PC.
The maximum AVI recording time is 10 minutes. Press ESC to exit.
Show image in original size
Displays image in its original resolution with zooming capability.
Use the mouse button or keys to zoom-in (+), zoom-out (-), and
original size (/).
Draw image by maintaining aspect ratio
Fits video to its original size or to the screen
(using the same aspect ratio). No zooming capability.
Draw image by filling the screen
Resizes the video to fill the entire screen. Zooming is not supported.
Enhanced Draw Mode On/Off
Enhances the image quality of a live video smaller than the original size.
About IP CCTV Information
Shows version information for the CCTV viewer.
Page 6
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
Navigating the Web Interface - Admin
Use the Admin interface to modify advanced features for the
camera. To gain acccess to the Admin site, enter the default
username and password (root and root).
Quick Configuration: A guided step-by-step walkthrough to
setup your camera’s configuration settings. Setup your Server
Name Setup, Date & Time, Network Configuration and IP-CCTV
DNS Setup.
System Configuration: View and/or modify system configuration
settings pertaining to the Server Name, Date & Time, Admin
Password, User Access Control and User Registration.
Network Configuration: Assign the connection network settings
for IP, Netmask, Gateway, DNS, Network Ports, Bandwidth
Control, Network Status, IP-CCTV DNS and Port Forwarding.
Device Configuration: Setup the connection between the
camera and server, by configuring the Serial Ports, adding
Privacy Zone screens, changing the Motion Detection
sensitivity, as well as modifying the camera name and image
quality for the Primary and Secondary streams.
Utilities: View the System Log file, Save the Configuration,
Reboot the camera, revert to the camera’s Factory Default
state, and update the camera’s firmware from System Update.
Page 7
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
Specifications
Camera Type
Image Sensor
Indoor / Outdoor Use
Lens
Min. illumination
Video Compression
Video Resolution
Image quality Control
Max Streaming Speed
Motion Detection
Network Bandwdth Control
Network Protocol
Viewer
Remote Admin.
Advanced Service
Dynamic IP
Security
System H/W
Audio Support
DI/DO Support
Serial Port
LAN Interface
Certification
Working Condition
Power Supply
Power Consumption
Size/Weight
Vandal-proof Mini Dome IP Camera
1/3" D1 progressive scan
CMOS image sensor
Indoor/Outdoor, weatherproof only
3.8mm F2.0 aperture, fixed, non-zoom
Color 4 Lux at F2.0
BW 0.1 Lux at F2.0 with DSS
H.264/MJPEG dual encoding
and transmission
720X480 / CIF = 352X240 / QCIF = 176X112
6 step quality control
Max 30 fps @ D1 resolution
H/W Motion Detection
VBR/CBR
(H.264, 32k~12Mbps)
HTTP, RTP/RTSP, TCP/IP, FTP,
Telnet, RARP, PPPoE, SNMP,DHCP, NTP,
SMTP client and etc
IE6 and later, Firefox, Safari, Chrome.
VLC, QuickTime, etc
Web based administration,
setup, control, and upgrade
Advanced e-mail / FTP / Alarm buffering
Event notification
DDNS / uPnP support
Channel-based user password protection for
live-cast, alarm output and audio
32bit embedded CPU running Linux
128MByte SDRAM
128MByte NAND FLASH
N/A
N/A
RS-232C
( built-in, Maintenance mode only)
10/100-base-T
FCC/CE, RoHS
0℃ ~ +50℃ / 20% ~ 80% RH
PoE support (router, switch or injector)
Max 5W, ( 48V, max 100mA )
4 3/4” Diameter x 3 5/8” H
1.3lbs (Camera Only)
Page 8
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
Limited Warranty Statement
1. Limited Warranty and Disclaimers
Universal Remote Control, Inc. (“URC”) warrants that the URC equipment
shall be free from defects in material and workmanship under normal usage
for one (1) year from purchase when such is purchased from URC. This
limited warranty is valid only in the United States of America. URC warrants
that the software will substantially conform in any material respect to its
functional specifications at the time of delivery. URC SHALL NOT BE LIABLE
FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS AND/OR
OMISSIONS MADE IN THE URC DOCUMENTATION. URC DOES NOT
WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE
OR THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE.
URC warrants that at the time of purchase the URC equipment and the URC
software complied with all applicable regulations and policies of the Federal
Communications Commissions (“FCC”) regarding electromagnetic
interference caused by electronic/computing devices and to the extent that
the URC equipment and/or the URC software fails to so comply, URC shall,
at its own expense, take all reasonable measures to promptly cause such to
comply.
URC equipment purchases from other than an authorized URC dealer or
distributor are without warranty.
THIS LIMITED WARRANT DOES NOT COVER TECHNICAL ASSISTANCE
FOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY
PROVIDED FOR HEREIN, THE EQUIPMENT, SOFTWARE AND
DOCUMENTATION OF URC ARE SUPPLIED “AS IS” WITHOUT ANY
WARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND. TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC EXPRESSLY
DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. URC
DOES NOT WARRANT, GUARANTEE, OR MAKE ANY
REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE
USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN
Page 9
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES
ARE SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS,
STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL
WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE
SKILL AND CARE, OR OUTCOME OR RESULTS.
WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER
PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE
FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS,
(III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE
WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY
CLAIM PROCEDURE.
The warranty limitations and warranty disclaimers may not apply to end user
in whole or in part, where such are restricted or excluded by applicable law
and such shall apply to the maximum extent permitted by applicable law.
In the event of any warranty claim, URC will, at its sole option, repair the
URC equipment using new or comparable rebuilt parts, or exchange the
URC equipment for new or rebuilt equipment. In the event of a defect, these
are the end user’s exclusive remedies.
All the URC equipment returned for service, exchange or repair require an
RGA number. To obtain an RGA number, you must complete a Return
Request Form which you may obtain by calling (914) 835-4484 or contacting
URC at returnrequest@universalremote.com. To obtain warranty service, end
user must deliver the URC equipment, freight prepaid, in its original
packaging or packaging affording adequate protection to URC at 420
Columbus Avenue, Valhalla, NY 10595. It is end user’s responsibility to
backup any macro programming, artwork, software or other materials that
may have been programmed into the unit. It is likely that such data, software,
or other materials will be lost during service and URC will not be responsible
for any such damage or loss. A dated purchase receipt, bill of sale, installation
contract or other verifiable proof of purchase is required. For the URC
Page 10
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
equipment support and other important information, please visit URC's
website available at www.universalremote.com or call the Customer Service
Center at (914) 835-4484.
This limited warranty only covers the URC equipment issues caused by
defects in material or workmanship during ordinary consumer use. It does not
cover product issues caused by any other reason, including but not limited to
product issues due to commercial use, acts of God, third-party installation,
misuse, limitations of technology, or modification of or to any part of the URC
equipment. This limited warranty does not cover the URC equipment sold as
used, as is, refurbished, so called "B stock" or consumables (such as batteries).
This limited warranty is invalid if the factory applied serial number has been
altered or removed from the URC equipment. This limited warranty
specifically excludes the URC equipment sold by unauthorized resellers.
With the exception of URC’s IR-only, broad-based consumer remotes, none
of URC’s PC programmable remotes or any of our Total Control® wholehouse equipment are authorized for online internet sales. Buying URC’s PC
programmable remotes or any of our Total Control® whole-house equipment
online means buying equipment that does not have a URC’s limited warranty.
Such equipment is not eligible for URC tech support or software support,
either.
2. URC’S Limitations of Liability
IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL,
INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES
OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY,
EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO
DATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS.
URC’S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALL
BE LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTS
PAID BY END USER FOR THE URC EQUIPMENT.
IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS
CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE.
Page 11
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF
END USER OR ANY THIRD PARTY.
THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN
WHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR
EXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.
URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE
BY OTHERS.
SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO
END USER. THIS LIMITED WARRANTY GIVES END USER SPECIFIC LEGAL
RIGHTS AND END USER MAY HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE OR JURISDICTION TO JURISDICTION.
End User Agreement
The terms and conditions of the End User Agreement available at
www.universalremote.com/eua.php shall apply.
Page 12
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
Regulatory Information to the user
n CE conformity Notice
Products with “CE” marking comply EMC Directive 2004/108/EC, issued
by the commission of the European Community.
1) EMC Directive
lEmission
: EN 55022
lImmunity
: EN 50130-4
lPower
: EN-61000-3-2, 3
n Declaration of Conformity
“Hereby, Universal Remote Control Inc. declares that this CAM-DC-O is
in compliance with the Essential requirements and other relevant provisions of EMC Directive 2004/108/EC.”
Certification
Type No.(Model No.)
Batch/Serial No.
Power Rating
CAM-DC-O
48.0V
0.06A
Page 13
CAM-DC-O VANDAL AND WEATHERPROOF NETWORK CAMERA
Declaration of Conformity
Company Name
:
Universal Remote Control Inc.
Company Address
:
Contact Information
:
Brand Name
:
500 Mamaroneck Avenue, Harrison, NY 10528, U.S.A
www.universalremote.com
Phone: (914)835-4484 Fax: (914)835-4532
UNIVERSAL remote control
Product Name
:
D1 CMOS IP CAMERA
Model Name
:
CAM-DC-O
This product herewith complies with the requirements of EMC Directive (2004/108/EC)
issued by the Commission of the European Community
Compliance with these directives implies conformity to the following European Community
n EMC Directive
l EN 55022
l EN 50130-4
l EN 61000-3-2
l EN 61000-3-3
List of test reports and/or certificate verified compliance with the standards above
n EMC Directive
l Report No.: KST-CEE-120026
l Testing Laboratory
: KOSTEC CO.,Ltd.
Date of issue
:
Name and signature of authorized person
:
Page 14
March 01, 2013
James Novak
Senior Product Manager
Universal Remote Control Inc.
NOTE
Page 15
NOTE
Page 16
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
www.universalremote.com
OCE-0140A Rev 01