Mitsubishi DV270 User`s manual

ENGLISH
DV270
27" LCD Flat Panel Display
USER'S MANUAL
Thank you for purchasing this flat panel display. Before using your DV270,
please read the "SAFETY PRECAUTIONS" section of this manual and
carefully to learn how to operate the display properly.
Keep this manual in a safe place.
Notes on lnstallation
This product is marketed with the assumption that it is to be
installed by qualified personnel with relevant skills and
competence. It is recommended to consult with an installation
specialist or your dealer to install and set up the product. We cannot
assume liabilities for damages caused by improper installation or
mounting, misuse, modifications or natural disasters.
DV270
USER’S MANUAL
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS --------------------------- 2
PREPARATION ----------------------------------------------------------- 4
OPERATING INSTRUCTIONS ---------------------------------------Using the remote control -----------------------------------------Using the menus ---------------------------------------------------Main menu ------------------------------------------------------------
6
6
7
7
CONNECTING PERIPHERAL EQUIPMENT --------------------Front Panel Controls----------------------------------------------Preparation ---------------------------------------------------------Video recorder -----------------------------------------------------Camera, camcorder, Video Game set -----------------------DVD player ---------------------------------------------------------Digital Set Top box ----------------------------------------------PC -------------------------------------------------------------------Headphone ---------------------------------------------------------Tips --------------------------------------------------------------------
11
11
11
12
13
13
14
14
15
15
PRODUCT SPECIFICATION ---------------------------------------
16
BEFORE CALLING SERVICE --------------------------------------- 18
Glossary ------------------------------------------------------------- 19
Service Contacts--------------------------------------------------- 20
Thankyou very much for choosing the DV270 LCD TV.
We recommend that you take a few minutes to read carefully through this
manual before installing and switching on the TV. Please keep this manual in a
safe place for future reference.
0
SYMBOL
SA 1965
SA 1966
SYMBOL DEFINITION
DANGEROUS VOLTAGE: The lightning flash with
arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
INSTRUCTIONS: The exclamation point within an
equilateral triangle to alert the user to the presence of
important operating and maintenance (servicing)
instructions In the literature accompanying the appliance.
Apparatus shall not be exposed to dripping or splashing, and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Caution - Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
1
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Observe all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and third grounding prong. The wide
blade or third prong is provided for your safety. When the provided plug
does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. The TV should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supplied to your
home, consult your local power company.
14. Unplug this apparatus during lightning storms or when unused for long
periods of time.
15. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
16. This product may contain lead or mercury. Disposal of these materials
may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the
Electronic Industries Alliance: www.eiae.org
17. Damage Requiring Service – The appliance should be serviced by
qualified service personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
2
18.
19.
20.
21.
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. The appliance has been dropped, or the enclosure damaged.
Tilt/Stability – All televisions must comply with recommended
international global safety standards for tilt and stability properties of its
cabinets design.
Do not compromise these design standards by applying excessive
pull force to the front, or top, of the cabinet, which could ultimately
overturn the product.
Also, do not endanger yourself, or children, by placing electronic
equipment/toys on the top of the cabinet. Such items could
unsuspectingly fall from the top of the set and cause product damage
and/or personal injury.
Wall or Ceiling Mounting – The appliance should be mounted to a wall
or ceiling only as recommended by the manufacturer.
Power Lines – An outdoor antenna should be located away from power
lines.
Outdoor Antenna Grounding – If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges.
Section 810 of the National Electric Cord, ANSI/NFPA No. 70-1984,
provides information with respect to proper grounding of the mats and
supporting structure grounding of the lead-in wire to an antennadischarge unit, size of grounding connectors, location of antennadischarge unit, connection to grounding electrodes and requirements for
the grounding electrode. See Figure below.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL
CODE
Note to the CATV system installer: This reminder is provided to call the CATV
system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to
the point of cable entry as practical.
Please, make sure to connect the power plug to the wall outlet socket after
connecting the TV to the adapter!
22. Objects and Liquid Entry – Care should be taken so that objects do not
fall and liquids are not spilled into the enclosure through openings.
3
PREPARATION
1.
Place the TV on a solid surface.
Ensure that the TV is placed in a position to allow free flow of air. Do not
cover the ventilation openings on the back cover.
To prevent any unsafe situations, no naked flame sources, such as lit
candles, should be placed on or in the vicinity of the LCD TV.
Avoid heat, direct sunlight and exposure to rain or water. The equipment
shall not be exposed to dripping or splashing.
2.
Insert the aerial plug firmly into the aerial socket ANT IN 75Ω at the
back of the TV.
4
3.
Remote control:
Remove the cover of the battery compartment. Insert the 2 batteries
supplied (Type AAA 1.5V).
4.
Power:
Insert the power cord into the 240V AC wall socket.
5.
Turn the TV on:
Press the power button on the control panel of the TV to turn it on.
If the TV is in standby mode, the indicator on the front of the TV
turns amber.
5
OPERATING INSTRUCTIONS
USING THE REMOTE CONTROL
POWER
MUTE
Press to turn the TV
on/off. The TV is never
completely
powered off
br
unless it is physically
unplugged.
Disable / enable sound.
DISPLAY
(1)
Display Channel number
when using RF input.
(2) Display input source
when using other input
except TV RF input.
CH
Press or (or ▲ or ▼) to
browse through the available
TV channels.
PRE-CH
To display the previously
selected TV channel.
0~9/100 Digit buttons
Press to select a TV
channel.
TV / VIDEO
VOL
Press + or – (or
or
to adjust the volume.
)
SOUND
To select Mono
/Stereo/Sound A /Sound
B / Sound AB from TV
RF input.
SLEEP
With this key you can set a
time period after which the
TV should switch itself to
standby. Press the key
repeatedly to select the
number of minutes. The
counter runs from 30, 60,
90,120 minutes. The timer
begins to count down from
the number of minutes
selected after the display has
disappeared.
PIP
Toggle Picture in
Picture on/off
MENU Press repeatedly
to display OSD menu.
DPF
Not Supported.
Select your input source:
press repeatedly to select
TV, AV1, AV2, S-VIDEO or
COMPONENT mode,
according to where you
connected your external
source.
AV1 / AV2 for a VCR
connected to the AV
connectors of the TV.
S-VIDEO for a S-Video
VCR connected to the
S-VIDEO connector of
the TV.
COMPONENT for a
DVD/DTV Set Top Box or
another component video
device connected to Y,
Pb, Pr and to the AV
AUDIO inputs L and R.
WIRELESS
SWAP
Not Supported.
Not supported.
PC
WIDE
Includes 3 modes: Press
repeatedly to select 4:3 /
16:9 /16:9 non-Linear.
6
Select input source from
PC.
USING THE MENUS
1.
2.
3.
4.
Press the MENU button repeatedly to display each menu.
Use the cursor up/down to select a menu item or adjust the setting of
Menu item.
Use the cursor left/right to enter a submenu or enable the function.
Press the MENU button to exit the menu.
MAIN MENU
Press the MENU button to open the OSD (On Screen Display). Adjustable
items include: VIDEO ADJUST, AUDIO ADJUST, PIP, SLEEP TIMER ,
SET UP and PC ADJUST.
7
Video Adjust
1.
2.
3.
4.
Contrast, Brightness and Saturation are adjusted from 0 to 100.
Black Level is adjusted from 0 to 100.
Sharpness is adjusted from -5 to +5.
You can adjust picture contrast, brightness, colour, tint and sharpness to
the levels you prefer.
Reset will restore settings to the default value.
When adjusting any item a sub-OSD will be displayed.
Audio Adjust
1.
2.
Volume is adjustable from 0 to 100.
Bass and Treble are adjustable from 0 to 100.
You can adjust Volume, Bass and Treble to the levels you prefer.
When adjusting any item a sub-OSD will be displayed.
8
PIP
1. PIP function toggles small picture on / off
2. Position moves the small picture
3. Source: Choose from TV /AV1/AV2/S VIDEO
4. Audio Select: Choose from MAIN/SUB
Sleep Timer adjusts the time period after which the TV should enter standby.
The counter runs from 30 > 60 > 90 > 120 minutes.
The timer begins to count down from the number of minutes selected after the
display has disappeared.
Note: To view the remaining time, press the SLEEP button once. To cancel
the sleep time, repeatedly press the SLEEP button until “---“ appears. If you
turn the TV off after setting the sleep time, the setting will be erased.
Set up
1. Blue screen: When no video input is detected, the screen will be blue or
blank. If set to ON, the screen will be blue. If set to OFF, the screen will be
blank. Default is ON.
2. Language: Configure language. OSD MENU includes English / Chinese.
Default is English.
3. System: Select the TV broadcast system.
9
4.
5.
6.
7.
8.
9.
CH Search: Search for all TV channels and store in memory.
CH Del: /Add. If “ Del” the channel will be hidden.
Manu Scan: Search manually for TV channels, and
Program channel by channel. After locating a new channel,
press the Menu key, and it will be automatically saved in the
next available channel.
CH Swap save the location of current channel and destination channel
for each other
View Mode: Includes 3 modes: Press repeatedly to select 4:3 /16:9 /
non-Linear.
Reset will set the default values for Blue Screen and Language.
PC Adjust
1.
2.
Auto tune is the auto-sizing function for VGA input.
Contrast, Brightness, Focus, Clock, H Position, V Position and
Colour Adjust are the functions for PC adjustment.
Colour Adjust Adjusts the colour temperature of the display.
10
Connecting Peripheral Equipment
FRONT PANEL CONTROLS
POWER
Power Key:
Press to toggle power on or off.
Menu Key:
Press to show the OSD menu and exit OSD menu on the TV.
Down / Up Key: Press to select function or channel.
- / + Key:
Press to confirm function selection or adjustment.
Source Key:
Press to select input source.
There is a wide range of video and audio equipment that can be connected to
your LCD TV. The following connection diagrams show you how to connect
them.
PREPARATION
Remove the back plate from the back of the TV as shown in the illustration.
Lay the LCD TV with the screen facing down on a table, as it will be easier to
connect your peripheral equipment. Please take precautions not to damage
the screen.
11
VIDEO RECORDER
How to connect
1.
Connect the supplied
antenna cable
to the
RF IN port of your VCR.
2.
Connect another RF cable from the output RF of your VCR to the input
of your TV. Better quality can be obtained if you also connect the Video,
Audio left and right (only for stereo equipment) cables
to the VIDEO,
AUDIO L and R inputs AV.
If you are using only mono equipment, connect only the VIDEO and the
AUDIO L (Mono) ports.
If your VCR has an S-VHS video jack:
For improved picture quality, connect an S-Video cable to the S-VIDEO input
on the TV, instead of connecting the VCR to the VIDEO port.
S-Video does not provide audio, audio cables must still be connected to
provide sound.
Watching VCR
1.
2.
3.
If you use connection , select CH Search.
If you use connection , select AV1.
Insert videotape in the VCR and press the PLAY button.
12
CAMERA, CAMCORDER, VIDEO GAME SET …
DIGITAL CAMERA
How to connect
1.
Connect your digital
camera, camcorder or
videogame set to
VIDEO port
and
for mono
AUDIO L
equipment.
2.
For stereo equipment also connect AUDIO R .
S-VHS quality with an S-VHS camcorder is obtained by connecting the
S-VHS cable with the S-VIDEO input
and AUDIO input .
How to use
1.
2.
Select VIDEO AV2 or S-VIDEO.
Turn on the external AV equipment.
DVD PLAYER
How to connect
1.
Connect the three
separate component
video cables
to the
DVD player’s Y, Pb, Pr
or Y, Cb, Cr ports and
to the Y, Pb and Pr
ports on the TV.
2.
Connect the audio cables
to the DVD player’s AUDIO L and R ports
and to the AUDIO L and R ports on the TV.
How to use
1.
2.
Select COMPONENT
Turn on the DVD set.
13
DIGITAL SET TOP BOX
Connect the Digital Set
Top Box to the LCD TV,
using the COMPONENT
INPUT and ensure an
aerial is connected to the
set top box.
How to connect
1.
Connect the three separate component video cables
to the DTV
player’s Y, Pb, Pr or Y, Cb, Cr ports and to the Y, Pb and Pr ports on
the TV.
Connect the audio cables
to the DTV player’s AUDIO L and R ports
and to the AUDIO L and R ports on the TV.
2.
How to use
1.
2.
Select COMPONENT
Turn on the DTV Set Top Box.
Warning: If you notice scrolling images, wrong colours or no colour, no
picture or even combinations of these on your screen, check if the
connections are inserted properly. Check if the cable colours match with
the Input connector colours.
PC
1
2
How to connect PC input
.
.
Insert a D-sub signal cable into the D-sub port located on the back of the
LCD TV.
Insert the Audio cable into the PC audio connector port on the back of
the LCD TV.
14
HEADPHONES
1.
2.
3.
Insert the plug into the headphones port , when inserted, the
headphones will block the speaker audio output.
Press the
key on the remote control to mute the sound from the
headphones and the internal loudspeakers of the TV.
Press the cursor left / right to adjust the volume.
Note: When a TV channel or external AV source is blocked because of a
rating set via the Parental control menu, the headphones are also muted.
TIPS
Caring for the screen
Do not rub or strike the screen with anything hard as this may scratch, mark,
or damage the screen permanently.
Unplug the LCD TV before cleaning the screen. Dust the TV by wiping the
screen and the cabinet with a soft, clean cloth. If the screen requires
additional cleaning, use a clean, damp cloth. Do not use liquid cleaners or
aerosol cleaners.
Mobile telephone warning
To avoid disturbances in picture and sound, malfunctioning of your TV or even
damage to the TV, keep your mobile telephone away from the TV.
End of life directives
Your new receiver contains materials that can be recycled and reused.
At the end of its life, specialized companies can dismantle the discarded
receiver and concentrate the reusable materials to minimize the amount of
waste.
Please ensure you dispose of your old receiver according to local regulations.
15
Product Specification
Feature
27” screen
WXGA (1280 x 720) Resolution
High Brightness (550 cd/m2 )
High Contrast Ratio (600:1)
Wide Viewing Angle (170 H / 170 V)
PC Input
Items
Specification
Screen Size
Aspect Ratio
27” TFT-LCD Panel
16 : 9
Resolution
1280 x 720 (WXGA)
Display Area (opening) H x V 597mm x 336mm
0.4665mm x 0.4665mm
Pixel Pitch
LCD Panel
Display colours
Contrast Ratio
16.7 million
600:1
Brightness
550 cd/ m
2
Viewing Angle
170° (Horizontal)/ 170° (Vertical)
Response Time
16.6ms
Lamp Type/Life
50000 hrs
Colour Temperature
Cool / Warm
TV Standard
PAL B/G ,D/K , I , NTSC M
TV Function Sound systems
NICAM ,A2 ,BTSC
Video Colour systems
PAL / SECAM / NTSC
AV1
RCA x 1
RCA x 1
Video Inputs AV2
S-Video x 1
Component
YPbPr x 1
16
Audio L/R x 1
Audio L/R x 1
Audio L/R x 1
Analog: D-Sub 15 pin (detachable
cable)
DDC 2B
Analog: FH: 31.5kHz to 48kHz
FV: 60Hz to 75Hz
Signal Input
PnP compatibility
PC Input
Input frequency
Recommended
Analog: 1024 x 768 (60Hz)
Headphone Mini-jack for stereo
(3.5ø)
Speaker (built-in): Two 3 watt
speakers
Headphone Mini-jack for stereo
(3.5ø)
Line Output (RCA L/R)
Input Audio
Audio Output
Audio Output: L / R
OSD language English/ Chinese(Default Language: English)
Table Stand
Included
Wall Mount
VESA 100 x 100 mm
Power Supply
AC100V~240V, 50/60Hz
Power Consumption
<140W
Panel Tilt
Forwards/Backwards/
Rotation
-5° / +20° / ±35°
Environment
Operating temp
Storage temp
Operating humidity
+ 0 °C ~ + 40 °C
- 25 °C ~ + 60 °C
10% ~ 85%
Dimensions
W x H x D (with stand)
898 x 470 x 287(mm)
Weight (net)
Kg (w/o Accessories)
13.4 Kg
Accessories
Remote Control, Batteries (x2), AC Power Cord,
D-sub Signal Cable, Audio cable, User’s Manual
Power
17
Before Calling Service
Please make these simple checks before calling service. These tips may save
you time and money since charges for receiver installation and adjustments of
customer controls are not covered under your warranty.
Symptoms
Ghosting or double
image
No power
No picture
Good picture but no
sound
Good sound but poor
colour
Poor picture
Snowy picture and noise
Horizontal dotted line
Television not
responding to remote
control
Items to Check and Actions to follow
*This may be caused by obstruction to the
antenna due to high rise buildings or hills.
Using a highly directional antenna may inprove
the picture.
*Check that the TV’s AC power cord is plugged
into the mains socket.
*Unplug the TV, wait for 60 seconds. Then reinsert plug into the mains socket and turn on
the TV again.
*Check antenna connections at the rear of the
TV to see if it is properly connected to the TV.
*Possible broadcast station trouble. Try another
channel.
*Adjust the contrast and brightness settings.
*Check the Closed Captions control. Some Text
modes could block the screen.
*Increase the Volume.
*Check that the TV is not muted; toggle the
mute button on the remote control.
*Adjust the contrast, colour and brightness
settings.
*Sometimes, poor picture quality occurs when
multiple peripherals are connected
simultaneously. In this case switch off one of
the other peripherals
*Check the antenna connection
*This may be caused by electrical interference
(e.g. hairdryer, nearby neon lights, etc.)
*Turn off the interfering equipment.
*Check whether the batteries are working, and
the polarity is correct. Replace if necessary
*Clean the remote control sensor lens on the
TV.
*Try using the buttons on the front of your TV.
*Select the TV mode to be sure your remote
control is in the TV mode.
18
GLOSSARY
Audio / Video Inputs
Located on the rear and the front of the receiver, these connectors
(RCA phono type plug) are used for the input of audio and video signals.
Designed for use with VCRs (or other accessories) in order to receive higher
picture resolution and offer sound connection options.
Menu
An on-screen listing of feature controls shown on the TV screen that are made
available for user adjustments.
Multichannel Television Sound (MTS)
The broadcast standard that allows for stereo sound to be transmitted with the
TV picture.
Programming
The procedure of adding or deleting channel numbers into the TV’s memory.
The TV only remembers the locally available or desired channel numbers and
skips over any unwanted channel numbers.
RF
Radio Frequency or modulated signal design used as the carrier for television
broadcasts.
Second Audio Program (SAP)
Another or additional audio channel provided for in the Multichannel Television
Sound (MTS) broadcast standard. A monaural soundtrack included within the
recorded or video signal (usually containing a second language translation for
the displayed program).
Sleep Timer
This function allows the user to set the time period after which the TV will
enter standby mode.
S-Video Input
Allows direct connection of high-resolution video sources, such as a Super
VHS videocassette recorder, Laser Disc player, etc. Provides improved
picture resolution, sharpness, and clarity.
19
Service Contacts
If problems remain after checking this manual, please contact your place of
purchase or contact. Australian Service Contacts visit the Mitsubishi Electric
Australia web site at www.mitsubishielectric.com.au for details of your
nearest Mitsubishi Electric Authorised Service Centre or contact the Service
Department for your state:
New South Wales and Australian Capital Territory
348 Victoria Road
Rydalmere, NSW, 2116
Telephone: 1300 651 808
Fax:
(02) 9684-7684
Queensland
12 / 469 Nudgee Road
Hendra, QLD, 4011
(Airlink Business Park)
Telephone: (07) 3623-2000
Fax:
(07) 3630-1888
South Australia and Northern Territory
77 Port Road
Hindmarsh, SA, 5007
Telephone: (08) 8340-0444
Fax:
(08) 8340-0555
Victoria and Tasmania
4 / 303 Burwood Hwy
East Burwood, VIC, 3151
Telephone: (03) 9262-9899
Fax:
(03) 9262-9850
Western Australia
5 / 329 Collier Road
Bassendean, WA, 6054
Telephone: (08) 9377-3411
Fax:
(08) 9377-3499
20