Intrinsically Safe PDA i.roc® Ci70 -Ex

Mobile Computing
Intrinsically Safe PDA i.roc® Ci70 -Ex
A new Paradigm in Intrinsically Safe Mobile Computing
Mobile Computing
Intrinsically Safe PDA i.roc® Ci70 -Ex with ATEX / IECEx Zone
1/21 and Class I, II, III, Division 1 approval
1
The unique modular concept of the i.roc® Ci70 -Ex combines state-of-the-art technology with a flexible, modular head system for all kinds of data acquisition systems: (LF, HF
and UHF RFID with 1D Barcode Laser Scanner and 2D Multi-Range Barcode Imager)
2
The world‘s only PDA with global explosion protection approval for ATEX / IECEx
Zone 1 and NEC Class I, Division 1, combined in a single device
3
The world‘s first Zone 1 and Class 1, Division 1 certified PDA with wide-area radio
(WWAN 3G UMTS or CDMA)
4
The world‘s only Zone 1 and Class 1, Division 1 certified handheld computer with
complete WLAN standard (IEEE 802.11 a/b/g/n)
The i.roc® Ci70 -Ex is the latest development in
ecom‘s successful i.roc® series and, at the same time,
the first PDA to have been jointly developed in conjunction with Intermec. Its global certifications and
worldwide ecom Support Service make it a fully deployable product solution to ensure maximum productivity at all times.
state
of the
Art
t
Mobile computers for use in potentially explosive environments often constitute a compromise as they cannot use the latest technologies. Intermec and ecom have therefore
collaborated to produce and launch a state-of-theart, intrinsically safe handheld computer solution.
Using a unique modular design, the i.roc® Ci70 -Ex can
be specifically configured to the customer‘s requirements by selecting different head modules. When requirements change, the head module on the unit can
be replaced or enhanced by the ecom Service Center.
In addition to a traditional 1D Barcode Laser Scanner
with high motion tolerance as well as Radio Frequency
Identification (RFID) technology with the main frequency ranges (LF, HF or UHF), an intrinsically safe version of
a 2D Multi-Range Barcode Imager is now available for
the first time.
This will be added to by other combination modules
such as an HF or LF/1D Barcode Laser Scanner and a
HART modem.
The i.roc® Ci70 -Ex has the latest near and far scanning
technology.
Approvals
In addition, the i.roc Ci70 -Ex combines the widest
range of global approvals for use in hazardous environments, from ATEX through IECEx to NEC, so
that the use and integration of different devices on
different continents is no longer required.
®
Therefore it defines the new industry standard for
intrinsically safe mobile computing.
2
The modular head design
Thanks to the space-saving and form-integrated head
modules it provides an ergonomic design, balance and
extreme ruggedness. This is instead of a traditional approach using an attached housing or SnapOn module,
which may come loose or has to be charged separately.
The structural unit with the basic housing of the PDA
also ensures the stability and ruggedness of the head
module.
Produktbereich
Mobile Computing
3
Mobile Computing
Head module
1D Laser
Barcode Scanner:
SN-SE955
2D Multi-Range
Barcode Imager:
EN-EX25
LF RFID Reader
(AirCoil):
NL-TLB30
LF RFID Reader
(Ferrite):
NF-TLB30
HF RFID Reader:
NH-UNI13
UHF RFID Reader:
NU-T80
Single Cap
4
Function
Description
Typical applications
Range
Cost-effective solution for all
common 1D barcodes even
under the most extreme conditions.
Warehouse and logistics
10 cm to
90 cm
The self-adjusting 2D imager lens
allows a wide range of applications for both near and far range.
Automatic
read correction enables barcode
scanning even through safety
glass.
Warehouse and logistics
Rugged 125/134 kHz reader
with Aircoil antenna.
Well-suited for reading / writing
RFID tags even on metal. Waterresistant and resistant to electromagnetic fields.
Equipment identification
1 cm to
10 cm
Like NL-TLB30, but with Ferrite
antenna.
Optimized for reading glass
transponders.
Equipment identification
1 cm to
10 cm
Asset tracking
Product and equipment
identification
Asset tracking
15 cm to
15 m
Product and equipment
identification
13.56 MHz reader with interna- Physical access control
tionally recognized RFID technoProduct identification
logy and internationally standard
frequency. Supports ISO 15693,
ISO 14443 etc. Ideal for applications in which the transponders
not only have to be read, but also
written.
1 cm to
10 cm
Latest high performance RFID
technology.
Ideal for applications where longer read ranges are required.
1 cm to
80 cm
Housing cover only.
However, head modules can be
added at any time.
Warehouse and logistics
Produktbereich
Mobile Computing
• Multi-core OMAP processor - 1 GHz
• 512 MB RAM, 1 GB flash memory
Flexibility
• Windows Embedded Handheld 6.5.3
The optional WWAN module combines both mobile
standards UMTS and CDMA in a single version. This also
means maximum flexibility for international companies.
• WWAN: 3G UMTS / CDMA
The devices can be used worldwide as the built-in WWAN
module supports all standards.
GSM/UMTS/CDMA/GPS
• WLAN: 802.11 a/b/g/n
• Bluetooth: 2.1 EDR
• IrDA infrared interface
• A-GPS
The i.roc® Ci70 -Ex constitutes the only solution for Zone
1/21 and Class I, II, III, Division 1 that combines all wireless
networking (WWAN, WLAN and Bluetooth 2.1) in a single
device. This allows fast data exchange across different networks even where coverage conditions are difficult.
Depending on the user‘s location due to the on-the-fly selection function, the i.roc® Ci70 -Ex is able to dial into the
respective networks, thus ensuring continuous network coverage.
• Attitude sensor
WLAN: 802.11 a/b/g/n
• Brilliant 3.5” VGA display - rugged Gorilla
Glass® with backlight and touch panel
Approved for Zone 1/21 and Class I, II, III, Division 1, the
i.roc® Ci70 -Ex is the only handheld computer that offers the
WLAN standard n, enabling integration of the i.roc® Ci70 -Ex
in all WLAN environments with 2.4 or 5 GHz.
• Long service life due to ruggedness and
wear-resistance
The n-standard increases the signal range and hence network
coverage as well as offering the highest data transfer rates.
Certification:
Windows Embedded Handheld 6.5.3
ATEX (Zone 1) IIC T4
ATEX (Zone 21) IIIC IP 64
Thanks to a resistive touch display, Windows MobileTM 6.5.3,
the latest standard for industrial PDAs, can be navigated
using a stylus or fingers even in humid or wet conditions or
when wearing gloves.
IECEx (Zone 1) IIC T4
IECEx (Zone 21) IIIC IP 64
NEC Class I, Division 1, A,B,C,D T4
NEC Class II, Division 1, E,F,G T4
NEC Class III, Division 1
5
Mobile Computing
Intermec platform
The i.roc® Ci70 -Ex is based on the successful CN70e
platform. For this reason the i.roc® Ci70 -Ex is fully compatible
with development tools and applications from the Intermec
Development Library and easy to integrate in an environment
of devices of the existing 70 series from Intermec.
This also has advantages when maintaining various PDAs
as there is no need to distinguish between the individual
devices. This allows effortless management of devices.
In contrast to the CN70e, the i.roc Ci70 -Ex is:
®
•
intrinsically safe
•
has various head modules for data acquisition, which
allows flexible use.
IP 64
Ruggedness
Due to its rugged construction, the i.roc® Ci70 -Ex is
ideally suited for mobile applications requiring compact design without compromising on technology.
The i.roc® Ci70 -Ex was developed with consideration for
all the adversities of everyday work of its users. Extreme
weather conditions or drops from distances of up to 1.2 m
(4 feet) are no problem thanks to its special design as well
as gas and dust certification. Durability
A durable display protected by Gorilla Glass® and lasercut, high wear-resistant keypad buttons complete the
excellent user experience:
permanent readability of the laser-cut buttons
• display readable in all lighting conditions and rain
System integration
• eliminates or minimizes downtime such as repair times
Intermec SmartSystemsTM
• increases PDA service life, thereby reducing TCO
(total cost of ownership)
For seamless, intelligent integration into your workflow,
functions such as SmartSystemsTM installation and ScanNGo
clients are available from Intermec.
These functions can be used for configuration or installation
in advance or carried out locally, for example by scanning a
barcode to ensure usability.
The devices can also be provided with the required configuration at the customer‘s request.
The Intermec SmartSystemsTM enables easy and
efficient maintenance of all systems of a company by allowing administrators to manage
PDAs, including the i.roc® Ci70 –Ex, from a
web portal and to install operating system and software updates online. This means that the devices can remain on-site
at all times, even when the software is being updated.
6
Power management & battery
Innovative power management and lithium-ion technology
of the batteries ensure extremely long operating times of
at least 10 hours - sufficient for a full workday. Charging
spare batteries during the shift is no longer required.
If the battery is not fully charged and fails during a shift,
the device can be equipped with a spare battery in nonhazardous areas at any time.
To eliminate confusion between standard and intrinsically safe
batteries, ecom has ensured by mechanical means, that only
intrinsically safe batteries can be used.
Produktbereich
Mobile Computing
Industries that require devices
certified for hazardous areas
More than 60% of manufacturers are in need of
intrinsically safe devices including; oil & gas, chemical and pharmaceutical industries, but also textile,
cosmetic, aerospace, automotive, food, agricultural,
mining and munitions industries - just to name a few.
i
When using the i.roc® Ci70 –Ex, many of our customers
obtain a full return on investment within only a few months.
• Reduces paperwork and shortens office working hours
by direct processing and availability in the ERP system or
similar.
• Reduces inspection times by up to 30%
• Improves data quality and reduces error rates
Typical types of locations where gases
are present include:
• Petroleum drilling platforms, refineries, gasoline
storage and dispensing areas
• Dry cleaning plants where vapors from cleaning
fluids can be present
• Aircraft hangars and fuel servicing areas
• Utility gas plants, and operations involving sto-
rage and handling of liquefied petroleum gas or
natural gas
Accessories*
A large selection of peripherals and accessories underlines
the flexibility and adaptability of the i.roc® Ci70 –Ex.
Product Division
Mobile Computing
• Cosmetic and Pharmaceutical plants
• Chemical and Paint plants
Typical types of locations where combustible dusts are present include:
• Grain elevators
• Flour and Feed Mills
• Plants that manufacture, use or store magnesium
Intrinsically Safe PDA i.roc® Ci70 -Ex
Product Guide
or aluminum powders.
• Producers of plastic, medicines and fireworks
• Producers of starch or candies
• Spice-grinding plants, sugar plants and cocoa
* All accessory components can be viewed in our Product Guide.
plants
• Coal preparation plants and other carbon handling or processing areas
7
Mobile Computing
Docking station
Computer Cup
The Dual and Quad Docks are used to charge the device
battery. A USB function is added to the Desktop Dock.
Insert for charging
one
i.roc® Ci70 -Ex
Battery Cup
Insert for charging
one
i.roc® Ci70 -Ex
Battery Pack
The various cups and base docks make them fully
customizable.
Desktop Dock
Base for USB client connectivity (1 bay) and charging
Dual Docks
Quad Docks
Pistol grip
Keypad
The i.roc® Ci70 -Ex comes with a QWERTY keypad for
regular text input or a numeric keypad with large function
keys.
A sensor measures the ambient light and adjusts the
keypad backlight accordingly. In this way, readability is
guaranteed even in poor light conditions.
The pistol grip can be easily attached to the housing as
required. The handle expands the functions and applications through its ergonomic design.
Numeric Keypad
8
QWERTY Keypad
Produktbereich
Mobile Computing
ecomprehensive
5
Days
Support
Service contract
Support makes all the difference: Being your partner,
we provide professional solutions.
By signing up for our ecomprehensive service
package, we offer you a guaranteed turnaround time
of five working days at our worldwide ecom Service
Centers in Germany, United States of America and
Singapore
Not only before and during, but particularly after the
sale and during the daily use of our products, it is
crucial that you rely on our mobile devices each and
every day.
To ensure this, ecom will provide you with professional assistance and customer care worldwide.
•
free servicing as part of the service contract
•
predictable costs
•
minimal downtime
•
professional solutions with the guarantee you
need.
9
Mobile Computing
Applications
Process reliability is essential for product quality to be
maintained allowing all processes to be carried out according to precise specifications. The i.roc® Ci70 -Ex,
with a direct link to an ERP system via WLAN or UMTS,
offers the ideal solution. Processes can be supported,
controlled and documented in real-time from stock
removal through to the production line and to the
warehouse.
Asset & Life-Cycle Management
The i.roc® Ci70 -Ex can be used to configure, control
and monitor system components and field devices via
a wireless connection.
During downtime or in the event of system errors,
cancellation or breakdown expenses can occur.
The freedom of movement and flexibility will make
work easier and also improve both production and
maintenance.
In summary, this ensures effective systems management,
optimal process execution and reduced downtime.
Warehousing and logistics
The i.roc® Ci70 -Ex uses barcodes and RFID to quickly
and accurately detect and identify goods in warehouses,
on trucks and in cars.
The 2D Multi-Range Imager reads barcodes up to 15
m (49 ft) away and eliminates walking unnecessary
distances and regular stooping or bending for employees.
Maintenance and systems service
The direct data connection via WLAN or WWAN
keeps the ERP system continuously up to date.
Based on an adequate round-trip software, a route is
created within the system that the field worker covers
on his regular round with the i.roc® Ci70 -Ex.
The system components (e.g. individual valves) can be
identified by means of RFID or barcode and checked
against exact specifications.
The results are then available online or per synchronization after completion of the round. Information on critical conditions and the resulting steps help to effectively
reduce downtimes.
10
Security through personal identification
In certain situations, it is important to locate employees.
For example, thanks to integrated GPS, injured users
can be located which allows rescue teams to reach
them in hazardous areas more quickly to provide the
necessary aid.
Produktbereich
Mobile Computing
Technical Data
Physical
Characteristics
incl. battery weight approx. 900 grams (2 pounds)
225 x 85 x 58 mm (8.8 x 3.3 x 2.3 inches) (standard configuration)
249 x 85 x 58 mm (9.8 x 3.3 x 2.3 inches) (with optional head module)
Environmental
Operating Temperature -20 °C ... +50 °C (-4 °F ... +120 °F)
Storage Temperature -20 °C ... +60 °C (-4 °F ... +140 °F)
Drop Specifications 1.20 m (4 feet) according to MIL-STD-810G at -20 °C and +50 °C (-4 °F and +120 °F)
Electrostatic Discharge +/- 8 KV contact discharge and +/- 15KV air discharge
Rain and Dust Resistance IP65
Power
Battery 3.7 V, 4,000 mAh ∙ IEEE 1725 compliant ∙ Li-Ion ∙ swappable
Operating System
Windows Embedded Handheld 6.5.3
Processor
OMAP Multi Core Processor 1GHz
Memory and
Storage
512 MB RAM, 1 GB Flash Memory, Customer-accessible microSD slot for removable
memory cards up to 32 GB
Display
3.5 inches, VGA (640 x 480 pixels), 65,536 colors, ambient light sensor, LED backlight, transmissive TFT-LCD
touchscreen display, highly durable due to Gorilla Glass®
Interfaces
USB – Full Speed 2.0 Client ∙ IrDA
Wireless LAN
IEEE 802.11 a/b/g/n ∙ Data Rates 6, 9, 12, 18, 24, 36, 48 and 54 Mbps and MCS0-7 ∙ Domestic Channels Frequencies 2412 - 2472, 2484, 5180, 5200, 5220, 5240, 5260 - 5320 MHz ∙ IEEE 502.11d ∙ Security: WPA2, WEP,
TKIP, AES; Authentication OPEN, SHARED-KEY, PEAP (MS-CHAP V2, Generic Token Card (GTC), MD5), TLS,
TTLS (PAP, CHAP, MS-CHAP, MS-CHAP V2, PAP/Token Card, EAP with GTC), LEAP, FAST ∙ Cisco CCXv4
compliant
Wireless WAN
3G WWAN for data communications:
UMTS/HSDPA/HSUPA (14.4 Mbps D/L, 5.76 Mbps U/L peak); Frequencies: 850, 900, 1800, 1900 MHz
CDMA/EV-DO Rev A (3.1 Mbps D/L, 1.8 Mbps U/L peak); Frequencies: 800, 850, 1900, 2100 MHz
GSM, GPRS, EDGE; Frequencies: 850, 900, 1800, 1900 MHz
Bluetooth
Class II, Version 2.1 + EDR ∙ Operating Channels: 0 - 78 (2402 - 2480 MHz) ∙ Data Rates 1, 2, 3 Mbps
GPS
A-GPS
Audio
Loudspeaker ∙ Bluetooth headset support ∙ VOIP audio support via headset
Sensor Technology Accelerometer: Enables automatic or application-specific features
Head Options
2D imager, 1D laser scanner, HF RFID, LF RFID, UHF RFID
Keyboard
Backlit numeric or alpha numeric ∙ laser etched hard keycaps
Regulatory
Approvals and
Conformity
Safety: 60950-1
EMC: FCC, CE
Laser: IEC/EN 60825-1 Class 2
Environmental: WEEE, RoHS
Radio: FCC, CE
Battery: UL 1642, IATA
Certification
ATEX (Zone 1) IIC T4
ATEX (Zone 21) IIIC IP 64
IECEx (Zone 1) IIC T4
IECEx (Zone 21) IIIC IP 64
NEC Class I, Division 1, A,B,C,D T4
NEC Class II, Division 1, E,F,G T4
NEC Class III, Division 1
11
Produktbereich
Mobile Computing
Germany (Headquarters) *
ecom instruments GmbH
Industriestraße 2
97959 Assamstadt
Tel.: +49 62 94 42 24-0
Fax: +49 62 94 42 24-100
E-mail: sales@ecom-ex.com
* also covering Switzerland
Benelux * *
ecom instruments BV
Watertoren 45c
3247 CL Dirksland, Netherlands
Tel.: +31 1 87 60 59 16
Fax: +31 1 87 60 33 47
E-mail: info.nl@ecom-ex.com
* * also covering Belgium and Luxembourg
France
ecom Nied sarl
4 Rue Ettore Bugatti
67201 Eckbolsheim
Tel.: +33 3 88 76 46 84
Fax: +33 3 88 76 02 85
E-mail: info.fr@ecom-ex.com
Italy
ecom instruments srl
Via Gandhi, 15 Galleria
20017 Rho (MI)
Tel.: +39 02 93 90 92 16
Fax: +39 02 93 90 62 97
E-mail: info.it@ecom-ex.com
Nordic * * *
ecom instruments ab
Trädgårdsgatan 4
45231 Strömstad, Sweden
Tel.: +46 52 66 65 20
Fax: +46 52 66 65 24
E-mail: info.se@ecom-ex.com
* * * covering the Baltic States, Denmark,
Island, Finland, Norway, Sweden
Southeast Europe * * * *
ecom instruments GmbH
Lärchengasse 15
2601 Siedlung Maria Theresia, Austria
Tel.: +43 2628 61 558
Fax: +43 2628 61 744
E-mail: info.at@ecom-ex.com
United Kingdom
ecom instruments ltd
A310, The Wilton Centre,
Redcar, TS10 4RF,
United Kingdom
Tel.: +44 1642 46 54 00
Fax: +44 1642 46 54 02
E-mail: info.uk@ecom-ex.com
America
North-, Central & South America
ecom instruments Inc.
1779 Westborough Drive, Suite 102
Katy, Texas 77449
Tel.: +1 281 496 59 30
Fax: +1 281 496 23 21
E-mail: info.us@ecom-ex.com
Asia
China
ecom instruments GmbH
Beijing Office
Room 11-C, CITIC Building Tower A 19
No.19 Jianguomenwai Dajie, Choyang District
Beijing 100004
Tel.: +86 1 08 52 61 81 76 01
Fax: +86 1 08 52 61 43 6
E-mail: info.cn@ecom-ex.com
Middle East * * * * *
ecom instruments fze
P.O. Box 8918
Saif-Zone, Sharjah, UAE
Tel.: +971 6 5 57 34 30
Fax: +971 6 5 57 34 31
E-mail: info.uae@ecom-ex.com
* * * * * also covering Egypt and Libya.
South East Asia
ecom instruments (SEA) Pte Ltd.
12 Arumugam Road
#05-11 Lion Building B
Singapore 409958
Tel.: +65 61 00 33 29
Fax: +65 63 99 33 29
E-mail: info.sg@ecom-ex.com
* * * * also covering Bulgaria, Croatia, Czech
Republic, Hungary, Romania, Serbia, Slovakia
and Slovenia.
Locate your nearest ecom partner on www.ecom-ex.com
E0000426/3000/01/13 · WEEE-Reg.-Nr. DE 934 99306 · 01/2013 Subject to modifications!
Europe
Mobile Computing
Intrinsically Safe PDA i.roc® Ci70 -Ex
Product Guide
Mobile Computing
i.roc® Ci70 -Ex
Product Guide
•Unless otherwise indica­ted
all accessories support
the i.roc® Ci70 -Ex
mobile com­puter.
marked acces­
•Only
sories are qualified for use
inside hazardous areas.
Certifications
Intrinsic Safety
Standard
Sample Configuration Code: CI70AN2NN00W10 A 00111
Config. Number
Position 15
Description
ATEX Zone 1/21
A
IECEx Zone 1/21
B
• Depending on country of
usage you have to select
your needed approval which
is marked on the device.
ATEX Zone 1/21 //
IECEx Zone 1/21
C
ATEX Zone 1/21 //
NEC Cl I, Div 1
D
NEC CI I, Div 1
E
NEC Cl I, Div 1 //
IECEx Zone 1/21
F
Radio Modules
Accessory Name
2
Sample Configuration Code: CI70AN2NN00 F3 0A00111
Config. Number
Position 10
Description
WLAN Module
00
IEEE 802.11 a/b/g/n
WWAN + WLAN Module
F3
Offers 3G connectivity:
UMTS/HSDPA/HSUPA, CDMA/EV-DO
IEEE 802.11 a/b/g/n
i.roc® Ci70 -Ex
Product Guide
•Unless otherwise indica­ted
all accessories support
the i.roc® Ci70 -Ex
mobile com­puter.
marked acces­
•Only
sories are qualified for use
inside hazardous areas.
Head Modules
Data Capturing
Module
Sample Configuration Code: CI70AN2 SN 00W10A00111
Config. Number
Position 8
SN-SE955-AA
Description
1D Short Range Laser Barcode Scanner.
SN
NL-TLB30-AA
125/134 kHz LF RFID R/W Module AirCoil.
NL
NF-TLB30-AA
125/134 kHz LF RFID R/W Module Ferrite.
NF
NH-UNI13-AA
13.56 MHz HF RFID R/W Module.
NH
Single Cap
No data Capturing Module attached.
NN
Keypads
Keypad Option
Sample Configuration Code: CI70A N2 SN00W10A00111
Config. Number
Position 6
Numeric Keypad
Description
Large backlit numeric keypad.
N2
QWERTY Keypad
Backlit QWERTY numeric keypad.
Q2
3
Mobile Computing
i.roc® Ci70 -Ex
Product Guide
Accessories Accessory Name
& Part Number
•Unless otherwise indica­ted
all accessories support
the i.roc®® Ci70 -Ex
mobile com­puter.
Stylus Pen
marked acces­
•Only
sories are qualified for use
inside hazardous areas.
A0009206
•Blue marked part numbers
are related to Intermec
price guide, black marked
part numbers to ecom.
Sample Configuration Code: CI70AN2SN00W10A00 2 41
Config. Number
Position 18
Stylus Pen
For use with bracket for
hand strap.
Dust Cover
Ensures a firm grip.
Provides protection of
the docking connector.
Bracket for Hand Strap
Bracket for Hand Strap
Required for use of hand
strap; provides retaining
fixture of stylus.
0
none
none
none
1
none
none
mounted
A0030317
2
mounted
none
none
Hand Strap
3
mounted
none
mounted
4
mounted
mounted
none none
5
mounted
mounted
mounted
6
mounted
enclosed
none
7
mounted
enclosed
mounted
8
enclosed
enclosed
none
9
enclosed
enclosed
mounted
A0030316
Dust Cover
A0030318
Memory Cards
Cards Accessory Name
4
Hand Strap
Sample
Sample Configuration Code: CI70A
CI70AN2SN00W10A002
N2 SN00W10A00111
41
Config. Number
& Part Number
Position 19
ATP microSD Card, 1 GB
1
A0030326
P/N 856-065-004
ATP microSD Card, 2 GB
2
A0030327
P/N 856-065-005
ATP microSD Card, 4 GB
4
A0030305
P/N 856-065-006
ATP microSD Card, 8 GB
8
A0030306
P/N 856-065-007
Description
Industrial grade microSD Card for
reliable performance in all i.roc® Ci70 -Ex
operating environments.
Produktbereich
Mobile Computing
i.roc® Ci70 -Ex
Product Guide
•Unless otherwise indica­ted
all accessories support
the i.roc® Ci70 -Ex
mobile com­puter.
marked acces­
•Only
sories are qualified for use
inside hazardous areas.
Accessories Accessory Name
Part Number
Scan Handle
Description
Scan handle, customer installable.
A0030302
Carry Case
Carry case including one tethered stylus and
shoulder strap.
A0030303
Holster
Holster including shoulder strap.
A0030304
Stylus Pen for
Carry Case
A0002749
Shoulder Carrying Strap
Replacement for provided stylus with carry
case.
Strap for use with leather case / holster.
A0030315
Batteries
Accessory Name
Part Number
Spare Ex Battery Pack
AM Ci70 -Ex
Description
Lithium-ion, 3.7 V, 4000 mAh. Only for use with
the i.roc® Ci70 -Ex.
A0030301
One battery pack included in every i.roc® Ci70 -Ex
order.
5
Mobile Computing
i.roc® Ci70 -Ex
Product Guide
Pre-Configured FlexDock Packs *
Accessory Name
•Unless otherwise indica­ted
all accessories support
the i.roc® Ci70 -Ex
mobile com­puter.
Desktop Dock
marked acces­
•Only
sories are qualified for use
inside hazardous areas.
Dual Dock
•Blue marked part numbers
are related to Intermec
price guide, black marked
part numbers to ecom.
Dual Dock
Part Number
AS030302
Description
For charging 1 PDA and 1 battery;
provides USB client functionality;
includes Torx screwdriver and USB cable.
For charging 2 i.roc® Ci70 -Ex.
AS030303
AS030304
Quad Dock
For charging 2 batteries "AM Ci70 -Ex".
For charging 4 i.roc® Ci70 -Ex.
AS030305
Quad Dock
For charging 4 batteries „AM Ci70 -Ex“.
AS030306
FlexDock Parts
Accessory Name
* Modular docking system for
i.roc® Ci70 -Ex mobile computers
and battery packs. Packs are not
assembled.
Included
• Dock base
• Adapter cups
• Power supply
Desktop Dock
Part Number
A0030307
P/N 852-920-001
Dual Dock
A0030308
P/N 852-918-001
Quad Dock
A0030309
P/N 852-916-001
Battery Cup
To be ordered separately
• AC power cord
A0030310
Computer Cup
Description
Base for USB client connectivity
(1 bay) and charging
23.1 x 12.7 x 4.0 cm (9.1 x 5.0 x 1.6 in);
weight approx. 540 g (19.1 oz)
Base for charging
23.1 x 12.7 x 4.0 cm (9.1 x 5.0 x 1.6 in);
weight approx. 550 g (18.8 oz)
Base for charging
44.5 x 12.7 x 4.0 cm (17.5 x 5.0 x 1.6 in);
weight approx. 1.155 g (40.8 oz)
Insert for charging 1 battery pack
„AM Ci70 -Ex“.
Insert for charging 1 i.roc® Ci70 -Ex.
A0030311
Ethernet Adapter
A0030324
6
Including power supply and cables to be used
with Desktop Dock only. Enables i.roc® Ci70 -Ex
to connect to company network.
Produktbereich
Mobile Computing
i.roc® Ci70 -Ex
Product Guide
Power Supplies and Cables
Accessory Name
Part Number
•Unless otherwise indica­ted
all accessories support
the i.roc® Ci70 -Ex
mobile com­puter.
Power Supply for Desktop
and Dual Dock
A0030313
marked acces­
•Only
sories are qualified for use
inside hazardous areas.
Power Supply for Quad
Dock
P/N 851-095-121
A0030314
P/N 851-064-317
• Blue marked part numbers
are related to Intermec
price guide, black marked
part numbers to ecom.
USB cable
A0030323
Description
Power supply, 12 V, 48 W;
for use with Desktop Dock or Dual Dock
13.0 x 7.6 x 3.3 cm (5.1 x 3.0 x 1.3 in);
weight approx. 270 g (9.6 oz)
Power supply, 12 V, 100 W;
for use with Quad Dock
18.0 x 5.8 x 3.9 cm (7.1 x 2.3 x 1.5 in);
weight approx. 690 g (24.3 oz)
Use with Desktop Dock for USB client
connection, Standard A - Micro B.
Power Cords
Accessory Name
Part Number
AC Power Cord EU
A0009206
AC Power Cord UK
A0009208
AC Power Cord IN, ZA, CH
A0009207
AC Power Cord US
A0009209
AC Power Cord IT
A0003485
AC Power Cord DK
A0003486
Description
To be ordered separately with every power
supply or pre-configured FlexDock packs.
7
Germany (Headquarters) *
ecom instruments GmbH
Industriestraße 2
97959 Assamstadt
Tel.: +49 62 94 42 24-0
Fax: +49 62 94 42 24-100
E-mail: sales@ecom-ex.com
* also covering Switzerland
Benelux * *
ecom instruments BV
Watertoren 45c
3247 CL Dirksland, Netherlands
Tel.: +31 1 87 60 59 16
Fax: +31 1 87 60 33 47
E-mail: info.nl@ecom-ex.com
United Kingdom
ecom instruments ltd
A310, The Wilton Centre,
Redcar, TS10 4RF,
United Kingdom
Tel.: +44 1642 46 54 00
Fax: +44 1642 46 54 02
E-mail: info.uk@ecom-ex.com
America
North-, Central & South America
ecom instruments Inc.
1779 Westborough Drive, Suite 102
Katy, Texas 77449
Tel.: +1 281 496 59 30
Fax: +1 281 496 23 21
E-mail: info.us@ecom-ex.com
* * also covering Belgium and Luxembourg
Asia
France
ecom Nied sarl
4 Rue Ettore Bugatti
67201 Eckbolsheim
Tel.: +33 3 88 76 46 84
Fax: +33 3 88 76 02 85
E-mail: info.fr@ecom-ex.com
China
ecom instruments GmbH
Beijing Office
Room 11-C, CITIC Building Tower A 19
No.19 Jianguomenwai Dajie, Choyang District
Beijing 100004
Tel.: +86 1 08 52 61 81 76 01
Fax: +86 1 08 52 61 43 6
E-mail: info.cn@ecom-ex.com
Italy
ecom instruments srl
Via Gandhi, 15 Galleria
20017 Rho (MI)
Tel.: +39 02 93 90 92 16
Fax: +39 02 93 90 62 97
E-mail: info.it@ecom-ex.com
Nordic * * *
ecom instruments ab
Trädgårdsgatan 4
45231 Strömstad, Sweden
Tel.: +46 52 66 65 20
Fax: +46 52 66 65 24
E-mail: info.se@ecom-ex.com
* * * covering the Baltic States, Denmark,
Island, Finland, Norway, Sweden
Southeast Europe * * * *
ecom instruments GmbH
Lärchengasse 15
2601 Siedlung Maria Theresia, Austria
Tel.: +43 2628 61 558
Fax: +43 2628 61 744
E-mail: info.at@ecom-ex.com
Middle East * * * * *
ecom instruments fze
P.O. Box 8918
Saif-Zone, Sharjah, UAE
Tel.: +971 6 5 57 34 30
Fax: +971 6 5 57 34 31
E-mail: info.uae@ecom-ex.com
* * * * * also covering Egypt and Libya.
South East Asia
ecom instruments (SEA) Pte Ltd.
12 Arumugam Road
#05-11 Lion Building B
Singapore 409958
Tel.: +65 61 00 33 29
Fax: +65 63 99 33 29
E-mail: info.sg@ecom-ex.com
* * * * also covering Bulgaria, Croatia, Czech
Republic, Hungary, Romania, Serbia, Slovakia
and Slovenia.
Locate your nearest ecom partner on www.ecom-ex.com
E0000427/7000/01/13 · WEEE-Reg.-Nr. DE 934 99306 · 01/2013 Subject to modifications
Europe