SOUND PANORAMA
SON PANORAMIQUE
SONIDO PANORAMA
KLANGPANORAMA
ЗВУКОВАЯ ПАНОРАМА
OPERATING INSTRUCTIONS
GUIDE D’UTILISATION
INSTRUCCIONES DE FUNCIONAMIENTO
BEDIENUNGSANLEITUNG
РАБОЧАЯ ИНСТРУКЦИЯ
Safety Information
READ THIS BEFORE OPERATING YOUR UNIT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE FRONT OR BACK COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates the presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock.
This symbol indicates important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
•• Leave space around the unit for sufficient
ventilation.
•• Avoid installation in extremely hot or cold
locations, or in an area that is exposed to
direct sunlight or heating equipment.
•• Keep the unit free from moisture, water, and
dust.
•• Do not let foreign objects in the unit.
•• Keep the ventilation openings clear of items,
such as newspapers, linens, or curtains.
•• Keep open flame from candles or other
sources away from the unit.
•• Observe the local regulations regarding
disposal of packaging materials, exhausted
batteries and old equipment.
•• Do not expose the unit to dripping or
splashing, or place objects filled with liquids
such as vases.
•• Do not let insecticides, benzene, or thinner
come in contact with the unit.
•• Never disassemble or modify the unit in any
way.
2
Notes on the AC power cord and the wall
outlet
•• The unit remains connected to AC power
as long as it is plugged into the wall outlet,
even if the unit has been turned off.
•• To completely disconnect this product from
AC power, disconnect the plug from the wall
socket outlet.
•• When setting up this product, make sure
that the AC outlet you are using is easily
accessible.
•• Disconnect the plug from the wall outlet
when not using the unit for long periods of
time.
2
Safety Information
4
Getting Started
4
What's Included
5
Parts Description
English
Table of Contents
8Installation
8
Installing the System
9
Installing the Remote Control Battery
10Connections
10
Subwoofer Connection
10
Connecting to HDMI Components
12
Connecting to Audio Components
13
Connecting the FM Antenna (Only for S9)
13
Power Connection
14Operation
14
Listening to Your System
16
Listening to USB (Only for S9)
18
Listening to FM Radio (Only for S9)
22
Listening to Music via Bluetooth (Only for S9)
23Settings
23
Setting the System
25Troubleshooting
27Specifications
28 Trademarks and Licenses
29Index
3
Getting Started
What's Included
Main unit
4
Remote control (1 ea)
Battery (1 ea)
HDMI cable (1 ea)
Power adapter (1 ea)
FM antenna (1 ea)
(Only for S9)
User manual (1 ea)
Getting Started
English
Parts Description
Front Panel
1
1
2
2
3
4
5
Sherwood BRAND
3
Power Button
Press to turn the main unit on or turn off to
standby mode.
Display Panel
Displays the current status of the main unit.
4
Volume Controller
Adjusts the volume level.
5
USB Port (Only for S9)
Connects a USB device.
Input Selector
Rotate to select an input source for playback.
5
S9/S7 3D Sound Soundbar
Rear Panel
8
1
7
6
2
3
4 5
1
HDMI OUT
See page 10.
5
FM TUNER (Only for S9)
See page 13.
2
HDMI IN 1/2/3
See page 10.
6
SUBWOOFER PRE OUT 1/2
See page 10.
3
DC IN
See page 13.
7
AUX IN R/L
See page 12.
4
Power Switch
See page 13.
8
OPTICAL IN
See page 12.
6
Getting Started
5
( USB )
Starts or pauses playback.
1
11
SEARCH.M ( FM TUNER )
Searches FM tuner stations.
2
10
( USB )
Stops playback.
3
9
4
MO/ST ( FM TUNER )
Toggles between FM stereo and mono modes.
/
( USB )
Skips to the next or returns to the previous file
or track.
8
REPEAT ( USB )
Selects a repeat function.
< RDS/ RDS > ( FM TUNER )
Tunes to the previous or next RDS station.
7
5
6
English
Remote Control
6
7
8
RANDOM ( USB )
Selects random playback.
SLEEP
Sets a certain period of time for the main unit
to be turned off.
DIMMER
Dims or brightens the display panel.
/ / /
•• Selects a file, folder, or track for music files.
•• Selects a setting option or menu.
TUNE +/ TUNE Tunes to a desired FM station.
1
2
3
4
PRESET -/PRESET +
Selects a preset FM station.
SETUP
Enters or exits the system setup menu.
SURROUND
Selects surround mode.
ENTER/MEMO
•• Confirms the selection.
•• Stores a preset station.
DISPLAY
Displays the current status of the main unit.
9
MUTE
Mutes or activates the sound.
10 INPUT SELECT
VOLUME
Adjusts the volume level.
Selects an input source for play back.
11
ON/STANDBY
Turns on the main unit or turn off to normal
standby mode.
7
Installation
Installing the System
To Install on a shelf
You can install the main unit on a shelf. Place
the main unit at a height close to ear-level in
the listening area.
When installing the main unit, use a stable
surface to avoid accidents or injury.
To Install on a Wall
You can install the main unit on the wall. Before
installation, see "CONNECTIONS" on page 10
and complete the wiring connections.
600 mm
5 mm
10 mm
4-5 mm
8
Caution
•• When the main unit is installed on a
wall, its weight could cause the screws
to come loose over time, or it may not
be adequately supported by the wall,
resulting in the unit falling. Make sure that
the wall you intend to mount the unit on is
strong enough to support it. Do not mount
on plywood or soft surface walls. If you
are uncertain of the wall quality, consult a
professional for an advice.
•• Sherwood is not responsible for
any accidents or damage that result
from improper installation, misuse or
modification of the product, or from
natural disasters.
•• Mounting screws are not supplied. Use
screws suitable for the wall material and
that can support the weight of the unit. It
is recommended to use 2 inch (50 mm)
long screws.
•• The main unit is magnetically shielded.
However, depending on the installation
location, color distortion may occur if the
main unit is installed extremely close to
the screen of the TV. If this happens,
turn the main unit off, and turn it on after
15 minutes. If the problem persists, move
the main unit further from the TV.
Installation
1
Press inward to release the lock (1),
and at the same time, slide the battery
holder out of the remote control with your
fingernail (2).
2
Place the "+" (top) side of the battery
down into the battery holder.
3
Push the battery holder back into its
original position.
English
Installing the Remote
Control Battery
Caution
•• If the battery is placed incorrectly, it can
cause explosion.
•• Use only one CR2025 (3 V) lithium
battery.
•• Remove the battery if the remote control
is not used for a long period of time.
•• Do not leave the product in a hot or
humid place.
•• Do not handle and store the battery with
metallic tools.
9
Connections
Subwoofer Connection
You can enjoy deep bass sounds by connecting
an active subwoofer.
Connecting to HDMI
Components
With HDMI, you can easily enjoy high quality
sounds and images. The main unit plays
audio from HDMI compatible products while
also passing on the video signal to a HDMIconnected TV.
1
(RIGHT)
2
(LEFT)
Active Subwoofer
Caution
•• Do not place objects behind the subwoofer
and block the ventilation ports.
•• Signal reception by the subwoofer may
be unstable if it is placed too close to
the main unit. In this case, separate the
subwoofer at least 1 m from the main
unit.
•• Signal reception by the subwoofer may
be interrupted if an obstruction (metal
door or concrete wall, aluminum covered
insulation, etc.) is placed between it and
the main unit. If this occurs, install the
subwoofer in an uninterrupted line-ofsight orientation from the main unit.
10
Blu-ray Player
Cable Box
HDMI TV
Confirming the HDMI control
functions
To use the HDMI control functions properly,
it is recommended to confirm the HDMI
control functions usable with each connected
component by performing the following
operations.
1
Turn on all the components connected
with HDMI cables.
2
Turn the TV off to standby mode.
•• Confirm that all the components are
turned off.
3
With all the components off, start
playback of a device (connected with
HDMI cable).
4
Confirm that all the components are
turned on and the inputs of the main unit
and TV are switched automatically.
About HDMI
HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the
technologies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual
Interface (DVI) in one specification. HDCP is
used to protect the digital content transmitted
and received by DVI-compliant displays.
This main unit is also compatible with the
DeepColor and x.v.Color feature (x.v.Color is
trademarks of Sony Corporation.).
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
Note
•• Check the setup of the connected
component if an image is poor or the
sound does not come out of a component
connected via the HDMI cable.
•• Audio signals (sampling frequency,
bit length, etc.) transmitted from an
HDMI jack may be suppressed by the
connected component.
•• When the connected component is not
compatible with copyright protection
technology (HDCP), the image and the
sound from the HDMI TV OUT jack may
be distorted or may be not output. In
this case, check the specification of the
connected component.
•• Regardless of which input is selected
for the system, the video signal from the
HDMI input jack (BD, DVD, SAT) that was
last selected is output from the HDMI TV
OUT jack.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multi-channel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and AV
devices such as DTVs.
11
English
Connections
S9/S7 3D Sound Soundbar
Connecting to Audio
Components
AUX Connection
You can connect your audio devices to the
unit and enjoy multichannel surround sound
capabilities.
•• Ensure the left (L) and right (R) channels
and the inputs and outputs are correctly
connected.
•• To listen to the sound of a connected audio
device, select AUX as the input source.
•• To listen to TV audio, select TV as the input
source.
Optical Connection
You can connect components equipped
with an optical out jack. On the main unit,
you can enjoy more plentifully the sound of
components, such as DVD players, Satellite
receiver/Cable boxes, BD (Blu-ray DiscTM)
players or TVs.
* "Blu-ray Disc" is a trademark of Blu-ray Disc
Association.
OPTICAL OUT
TV, DVD Player, etc.
Caution
R
L
TV, DVD Player, etc.
12
•• TVs without an optical output jack cannot
be connected to the unit.
Connecting the FM
Antenna (Only for S9)
You can listen to FM radio by connecting the
FM antenna to the FM terminal on the main
unit.
To strengthen the signal reception, extend the
antenna to its full length.
Power Connection
Make sure to plug in after you have connected
all your components to the main unit. Plug the
supplied AC input cord into the AC inlet and
then into the wall AC outlet.
Make sure to turn on the power switch after
plugging in. Otherwise, you cannot turn on the
main unit even after plugging in completely and
pressing the power button on the front panel.
Power Switch
Caution
•• The supplied AC adapter is designed
exclusively for use with this unit. Do not
attempt to use it with any device for which
was not expressly designed, since fires
or shocks may occur.
•• Handle the power cord by the plug part.
Do not pull out the plug by tugging the
cord, and never touch the power cord
when your hands are wet, as this could
cause a short circuit or electric shock.
•• The system should be disconnected by
removing the main plug from the wall
socket when not in regular use for a long
period of time.
13
English
Connections
Operation
Listening to Your
System
Basic Operation
4
Start playback of the component you
selected in step 1.
5
During playback, you can adjust the
volume level.
•• On the main unit, rotate the volume
controller.
•• On the remote control, press
VOLUME -/+.
You can listen to audio by following the basic
procedures below.
1
Turn on the connected component.
2
Turn on the main unit.
•• On the main unit, press PUSH ON/
STANDBY.
•• On the remote control, press ON/
STANDBY .
VOL -
VOL +
Muting the Sound
You can mute the sound temporarily by
pressing MUTE.
3
14
Select an input source you want to play
back.
•• On the main unit, rotate INPUT
SELECT.
•• On the remote control, press INPUT
SELECT </>.
•• Each time the button is pressed, the
display changes as follows.
S9
HDMI1 → HDMI2 → HDMI3 → TV →
AUX → OPTICAL → FM STEREO →
USB → BLUETOOTH
S7
HDMI1 → HDMI2 → HDMI3 → TV →
AUX → OPTICAL
1
Press MUTE to mute the sound.
2
Press MUTE or VOLUME - / + to turn on
the sound.
Selecting Surround Mode
This system uses OPSODIS Technology,
which generates spatial sound, without having
to use walls to reflect the sound. This creates
the illusion of three-dimensional acoustics and
enables you to experience the film soundtrack
and music with a power and intensity not
previously achieved. However, the options
available will depend on the type of source
you're listening to. The following modes
provide basic surround sound for stereo and
multichannel sources.
1
Press SURROUND to select STEREO,
3D STEREO, or 3D SURROUND.
If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding format
will automatically be selected and appear in the
display.
With two channel sources, you can select from:
•• DOLBY Digital
Dolby Digital is a multi-channel digital
signal format developed by Dolby
Laboratories. Discs bearing the Dolby
Digital logo include the recording of
up to 5.1 channels of digital signals.
This will put you right in the middle of
the action, just like being in a movie
theater or concert hall.
•• DTS
DTS Digital Surround (also called
simply DTS) supports up to 5.1
discrete channels and uses less
compression for high fidelity
reproduction. Use it with DVDs and
CDs bearing the DTS logo.
•• STEREO
STEREO reproduces realistic sound
through the front speakers (and
possibly your subwoofer depending on
your speaker settings). Dolby Digital
and DTS multichannel sources are
downmixed to stereo with the aid of
digital sound processing.
•• 3D STEREO
3D STEREO produces more sound
expansion through 2 channel audio
system with the aid of Opsodis sound
processing.
•• 3D SURROUND
3D SURROUND enriches the sound
reproduction quality of an 2 or 5.1
audio input source with the aid of
virtual 5.1 channel 3D effects from
speakers that surround the listener.
15
English
Operation
S9/S7 3D Sound Soundbar
Displaying Operation Status
1
Press DISPLAY.
Each time the button is pressed, the
display mode changes as follows:
•• USB
Playback file status → Repeat setting
→ Random setting → Playback file
status
Listening to USB
(Only for S9)
You can play audio files from a USB device.
However, editing or copying the data file is not
possible.
•• BLUETOOTH
Paired device name → Surround
mode → Signal input → Volume level
→ Paired device name
•• HDMI
HDMI → Surround mode → Signal
input → Volume level → HDMI
Note
•• The USB jack does not support the
connection of other USB devices except
for a USB flash drive or a USB memory
card reader.
•• When the USB device does not fit into
the USB jack, a USB extension cable is
required.
•• You can only play back the content from
the connected USB device.
•• Copy-protected contents are not playable.
16
Operation
1
To Stop Playback
1
During playback, press .
During playback, press REPEAT.
Each time the button is pressed, repeat
mode changes as follows:
•• Repeat One
Repeats the currently playing music
file.
•• Repeat Fol
Repeats all music files in the folder.
2
To resume playback, press
To Pause Playback
1
During playback, press .
•• Playback will stop at the point where
the button is pressed.
•• To resume playback from this point,
press the button again.
To Skip Forward or Backward
1
•• Repeat All
Repeats all music files.
.
During playback, press
or
.
•• Each time the button is pressed, a
track is skipped forward or backward.
To Play Randomly
1
During playback, press RANDOM.
•• "Random On" is displayed on the
display panel.
•• All music files in the folder are played
in random order.
2
To cancel random playback, press
RANDOM again.
•• "Random Off" is displayed on the
display panel.
Note
•• You can only use the skip mode, repeat
mode and random mode when playing
music files stored on a USB memory
device.
17
English
To Play Repeatedly
Playback Operation
S9/S7 3D Sound Soundbar
Listening to FM Radio
(Only for S9)
Auto Tuning
1
Press TUNE + or TUNE - for more than
2 seconds.
•• The tuner keeps searching until a
station with strong signal strength is
found. The display shows the tuned
frequency.
•• If the station found is not the desired
one, simply repeat this operation.
•• Stations with weak signal strength are
skipped during auto tuning.
Auto Presetting
1
Press and hold down ENTER/MEMO for
more than 2 seconds.
•• "AUTO MEMORY" blinks and the
receiver begins to preset stations with
strong signal.
•• Up to 30 FM stations may be stored.
•• To stop auto presetting, press ENTER/
MEMO again.
Note
•• FM stations with weak signal strength
cannot be stored to memory.
Manual Tuning
1
18
Press TUNE + or TUNE - repeatedly until
the desired station is found.
Manual Presetting
Tuning in to Preset Stations
1
Tune in to the desired station with auto or
manual tuning.
1
Select FM TUNER as the input source.
2
Press ENTER/MEMO.
•• A preset number blinks.
2
Select a desired preset number by
pressing PRESET - or PRESET +.
3
Select a desired preset number (1~30) by
pressing TUNE + or TUNE -.
•• A station has now been stored in the
memory.
•• A stored station is erased from the
memory by storing another station in
its place.
4
Press ENTER/MEMO again to confirm
your selection.
•• The station has now been stored in
the memory.
•• A stored station is erased from the
memory by storing another station in
its place.
5
Repeat the above steps 1 - 4 to store
another station.
19
English
Operation
S9/S7 3D Sound Soundbar
RDS Tuning
RDS(Radio Data System) is a method for
sending information signals together with
transmitter signals. Your tuner is capable of
translating these signals and displaying the
information.
These codes contain the following information:
Program Service name(PS), A list of Program
Types(PTY), Traffic Announcement(TA), Radio
Text(RT).
TP search
Use this function to automatically search
and receive stations broadcasting the traffic
program.
1
In FM mode, select the TP search mode.
•• "TP SEARCH" is displayed.
2
While "TP SEARCH" is displayed:
•• The tuner automatically searches for
stations broadcasting traffic programs.
•• "NO TP" is displayed if the signal
is weak or there are no stations
broadcasting traffic programs.
•• When "TP SEARCH" is not displayed,
repeat again from step 1.
Note
•• In some countries, RDS tuner function
may not be available.
RDS search
Use this function to automatically search and
receive stations offering RDS services.
1
In the FM mode, press SEARCH.M to
select the RDS search mode.
•• Each time this button is pressed,
search mode changes as follows:
RDS SEARCH → TP SEARCH →
PTY SEARCH(PTY NAME) → OFF
2
While "RDS SEARCH" is displayed:
•• The tuner automatically searches for
stations offering RDS services and
displays the name of the station.
•• If no RDS station is found, "NO RDS"
is displayed.
•• When "RDS SEARCH" is not
displayed, repeat again from step 1.
20
Operation
Use this function to automatically search
and receive stations broadcasting a desired
program type.
1
Displaying RDS information
1
Press DISPLAY.
English
PTY search
In the FM mode, select the PTY search
mode.
•• "PTY SEARCH (PTY NAME)" is
displayed.
•• Each time this button is pressed, display
mode changes as follows:
Program Service → Normal (Frequency)
name (PS)
Radio Text (RT) ← Program Type (PTY)
2
3
While displaying "PTY SRCH", press
< RDS or RDS > to select a desired
program type.
•• Each time these buttons are pressed,
one of 29 different types of programs
is selected.
(NEWS, AFFAIRS, INFO, SPORT,
EDUCATE, DRAMA, CULTURE,
SCIENCE, VARIED, POP M, ROCK
M, EASY M, LIGHT M, CLASSICS,
OTHER M, WEATHER, FINANCE,
CHILDREN, SOCIAL, RELIGION,
PHONE IN, TRAVEL, LEISURE,
JAZZ, COUNTRY, NATION M,
OLDIES, FOLK M, DOCUMENT)
•• When "PTY SEARCH (PTY NAME)" is
not displayed, repeat again from step 1.
•• Program Service Name (PS)
The name of the radio station.
•• Program Type (PTY)
This indicates the kind of program currently
being broadcast.
•• Radio Text (RT)
Messages sent by the radio station. For
example, a talk show radio station may
provide a phone number as RT.
•• If signals are too weak or no RDS service
is available, "NO NAME", "NO PTY" or "NO
TEXT" will be displayed.
While a desired program type is
displayed:
•• The tuner automatically seeks a
station offering PTY services.
•• If no station is found, "NO PROG" is
displayed.
21
S9/S7 3D Sound Soundbar
Listening to Music via
Bluetooth (Only for S9)
4
Press ENTER/MEMO to display the pin
code(0000) on the display panel.
5
Press ENTER/MEMO. "PAIRING" blinks.
6
Search and pair the main unit with your
portable device.
The name of the main unit is displayed as
"Sherwood S9" on your portable device.
7
When the pairing is complete, the paired
device name is displayed on the display
panel.
The main unit uses Bluetooth wireless
technology to stream music from your portable
devices.
1
Turn on the main unit.
2
Press INPUT SELECT repeatedly to
select BLUETOOTH.
3
Press to display "PAIRING" on the
display panel.
22
Note
•• Before you connect a Bluetooth device to
the main unit, familiarize yourself with the
Bluetooth capabilities of the device.
•• Keep the main unit away from other
electronic devices that may cause
interference.
Settings
6
Press
7
Press ENTER/MEMO to confirm.
•• To return to the previous menu,
press .
•• To exit the menu, press SETUP again.
or
to set a value.
English
Setting the System
You can set additional sound settings.
1
Press SETUP.
2
Press or to select 1 SYSTEM SET or
2 HDMI SET.
3
Press ENTER/MEMO to confirm.
4
Press
5
Press ENTER/MEMO to confirm the
selected setting.
to select an option.
23
S9/S7 3D Sound Soundbar
* Default settings are shown in bold below.
Setting
Option
Descriptions
6hr
STANDBY
(Auto Standby)
4hr
2hr
Sets the standby time for the system.
OFF
OFF
DRC (Dynamic
Range Control)
1 SYSTEM SET
DELAY
SW LEVEL
ON
0ms ~
200ms
Off ~
-20 ~ 0dB
AMP
HDMI (HDMI Audio)
THRU
2 HDMI SET
OFF
CEC
ON
Note
Adjusts the level of dynamic range for movie
soundtracks optimized for Dolby Digital, DTS,
Dolby Digital Plus and Dolby TrueHD (You
may need to use this feature when listening to
surround sound at low volumes.).
Some monitors have a slight delay during video
playback, so the soundtrack will be slightly
out of sync with the picture. By adding a bit of
delay, you can sync the sound to the video. The
delay can be adjusted within the range of 0 ms 200 ms.
Adjusts the sound level of the subwoofer.
Specifies the routing of the HDMI audio signal
from the system (amp) or through to a TV or flat
screen TV. When THRU is selected, no sound
is output from the system.
Allows input selection of this receiver to be
interlocked with the operation of the connected
components. The CEC Control function may not
work depending on the connected component
and its settings.
•• When the CEC Control is set to "ON", you can also use the ARC (Audio Return Channel)
function, enabling TV to send audio signals to this receiver via a HDMI cable. To use the ARC
function, TVs that support the ARC function of the HDMI 1.4 standards are required.
24
If you experience any of the following difficulties while using the system, use this troubleshooting
guide to help remedy the problem before requesting servicing. Should any problem persist, consult
your nearest authorized dealer or authorized independent company.
If the unit does not operate normally due to external influence such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.
GENERAL
Problem
Remedy
The power does not turn on.
•• Disconnect the power plug from the outlet, and connect again.
The system suddenly turns
off.
•• After about a minute (you won't be able to turn the unit on during this
time), turn the system back on. If the message persists, call an authorized
independent service company.
No sound is heard after a
function is selected.
•• Make sure the component is connected correctly.
(See "CONNECTIONS" on page 10.)
•• Press MUTE to restore the sound.
Can't operate the remote
control.
••
••
••
••
The display is dark or off.
•• Press DIMMER on the control repeatedly to return to the default setting.
Replace the batteries. (See page 9.)
Operate within 7 m, 30° of the remote sensor
Remove any obstacles, or operate from another position.
Avoid exposing the remote sensor on the front panel to direct light.
CONNECTED COMPONENTS
Problem
Remedy
There is no sound from the
selected component.
•• Check that the component is connected correctly to the audio input jacks of
components.
•• Check that the cords are fully inserted into the jacks on both the component
and the main unit.
•• Ensure that the component is selected correctly.
Sound is interrupted or there
is noise.
•• Check the output audio formats support system.
No sound is heard or there
is noise when software with
DTS is played back.
•• Set the digital volume level of the system to full, or to the neutral position.
•• Ensure the player's settings are correct and/or the DTS signal out is on.
Refer to the instruction manual supplied with the DVD player.
During playback search,
there is noise from a DTS
compatible CD player.
•• This is not a malfunction, but be sure to turn the volume down to prevent
the output of loud noise from the system.
25
English
Troubleshooting
S9/S7 3D Sound Soundbar
HDMI
Symptom
Remedy
No picture or sound.
•• If the problem still persists when connecting your HDMI component directly
to your monitor, consult the component or monitor manual or contact the
manufacturer for support.
No picture.
•• Depending on the output settings of the source component, the video
format may not be displayed. Change the output settings of the source,
or connect your source component directly to TV using the component or
composite video jacks.
•• This system is HDCP-compatible. Check that the components you are
connecting are also HDCP-compatible. If they are not, please connect your
source component directly to TV using the component or composite video
jacks.
•• Some source components will not work with this system (even if it is
HDCP-compatible). In this case, connect your source component directly to
TV using the component or composite video jacks.
•• If video images do not appear on your TV or flat screen TV, try adjusting
the resolution, DeepColor or other setting for your component.
•• To output signals in DeepColor, use an HDMI cable (High Speed HDMITM
Cable) to connect this system to a component or TV with the DeepColor
feature.
No sound, or sound
suddenly ceases.
•• If you've made separate connections for audio, make sure you have
assigned the analog/digital jack(s) to the corresponding HDMI input for the
component.
•• Check the audio output settings of the source component.
•• If the component is a DVI device, use a separate connection for the audio.
Important Information Regarding the HDMI Connection
Some HDMI signals cannot be routed through this system. (This depends on the HDMI-equipped
component you are connecting. Check with the manufacturer for HDMI compatibility information.)
If you cannot receive HDMI signals properly through this system (from your component), please try
the following configuration when connecting up.
26
Specifications
Rated power output
Front Tweeter High/Low
Front Woofer
English
Amplifier
25 W per channel (6 Ω, 1 %)
Input/Output
HDMI terminal
Input
Output
Audio input
HDMI INPUT x 3
HDMI OUTPUT 1 (ARC)
AUX (Analog), Optical x1 (Digital)
Speaker
Woofer
Type
Impedance
Tweeter Low
Type
Impedance
Tweeter High
Type
Impedance
5" Cone Type
6Ω
1" Dome Type
6Ω
0.8" Dome Type
6Ω
General
Power Requirements
Power Consumption
In standby
Dimensions
Weight (without package)
AC 100-240 V, 50/60 Hz (DC 24 V)
AC 45 W (DC 1.8 A)
0.5 W or less
1,055 mm (W) x 145 mm (H) x 130.5 mm (D)
6.4kg (S9) / 6.3kg (S7)
27
Trademarks and Licenses
This system incorporates a sophisticated Digital Signal Processor that allows you to create
optimum sound quality and sound atmosphere in your personal Home Theater.
DTS Digital Surround
DTS Digital Surround (also called simply DTS)
supports up to 5.1 discrete channels and uses
less compression for high fidelity reproduction.
Use it with DVDs and CDs bearing the DTS
logo.
Manufactured under license under U.S.
Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued
& pending. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks
& DTS Digital Surround and the DTS logos
are trademarks of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.
Dolby Digital
Dolby Digital is the multi-channel digital signal
format developed by Dolby Laboratories.
Discs bearing the Dolby Digital logo include
the recording of up to 5.1 channels of digital
signals. This will put you right in the middle of
the action, just like being in a movie theater or
concert hall.
Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
28
HDMI
HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC
in the United States and other contries.
OPSODIS
OPSODIS is a registered trademark of the
OPSODIS LTD.
Opsodis and Opsodis Device are Trade Marks
of Adaptive Audio Limited and are used under
licence by Inkel corporation. Patents covering
Opsodis technology are owned by Adaptive
Audio Ltd and are also used under licence by
Inkel corporation.
Bluetooth
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Inkel
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
A
R
About HDMI 11
Auto Presetting 18
AUX Connection 12
RDS search 20
Rear Panel 6
Remote Control 7
B
S
Basic Operation 14
Bluetooth 22
Setting the System 23
STEREO 15
Subwoofer Connection 10
Surround Mode 15
C
Connecting to HDMI Components 10
D
Displaying the Operation Status 16
DOLBY Digital 15
DTS 15
F
English
Index
T
TP search 20
Tuning 19
Number
3D STEREO 15
3D SURROUND 15
FM Antenna 13
FM Radio 18
Front Panel 5
I
Installing the Remote Control Battery 9
Installing the System 8
L
Listening to USB 16
M
Manual Presetting 19
Muting the Sound 14
O
Optical Connection 12
P
Playback Operation 14
Power Connection 13
Preset Stations 19
PTY search 20
29
Memo
SOUND PANORAMA
SON PANORAMIQUE
SONIDO PANORAMA
KLANGPANORAMA
ЗВУКОВАЯ ПАНОРАМА
Printed in China
Imprimé en Chine
Impreso en China
Gedruckt in China
Отпечатано в Китае