Model No. 831.21952.3
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal (under frame)
• Assembly
• Operation
• Maintenance
• Part List and Drawing
Sears, Roebuck and Co.
Hoffman Estates, IL 60179
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Keep this manual
for future reference.
BIKE EXERCISER
User’s Manual
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
HOW TO USE THE EXERCISE BIKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
HOW TO ORDER REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
90 DAY FULL WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning
decal(s). If a decal is missing or illegible, call
1-888-533-1333 and request a free replacement
decal. Apply the decal in the location shown.
Note: The decal(s) may not be shown at actual size.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise bike before using your exercise bike.
Sears assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons with pre-existing health problems.
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the exercise bike. Always wear
athletic shoes for foot protection.
2. Use the exercise bike only as described in
this manual.
10. The heart rate monitor is not a medical
device. Various factors may affect the accuracy of heart rate readings. The heart rate
monitor is intended only as an exercise aid
in general.
3. It is the responsibility of the owner to ensure
that all users of the exercise bike are adequately informed of all precautions.
11. The exercise bike should not be used by
persons weighing more than 275 lbs.
(125 kg).
4. The exercise bike is intended for home use
only. Do not use the exercise bike in a commercial, rental, or institutional setting.
12. Always keep your back straight while using
the exercise bike; do not arch your back.
5. Keep the exercise bike indoors, away from
moisture and dust. Do not put the exercise
bike in a garage or covered patio, or near
water.
13. The exercise bike does not have a freewheel;
the pedals will continue to move until the
flywheel stops. Reduce your pedaling speed
in a controlled way.
6. Place the exercise bike on a level surface,
with a mat beneath it to protect the floor or
carpet. Make sure that there is at least 2 ft.
(0.6 m) of clearance around the exercise bike.
14. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
7. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
8. Keep children under age 12 and pets away
from the exercise bike at all times.
3
BEFORE YOU BEGIN
Thank you for selecting the new PROFORM XP™ 440
R exercise bike. Cycling is an effective exercise for
increasing cardiovascular fitness, building endurance,
and toning the body. The 440 R exercise bike provides
a selection of features designed to make your workouts
at home more effective and enjoyable.
reading this manual, please see the back cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
For your benefit, read this manual carefully before
you use the exercise bike. If you have questions after
Length: 4 ft. 5 in. (135 cm)
Width: 2 ft. (61 cm)
Console
Handlebar
Accessory Tray
Pedal
Backrest
Seat
Wheel
Handlebar
Heart Rate Monitor
Adjustment Handle
Handle
Leveling Foot
4
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included. If a part is missing, please call 1-888-533-1333.
M10 Jam Nut
(57)–2
M8 x 20mm
Screw (55)–7
M4 x 16mm
Screw (61)–4
M5 x 16mm
Screw (60)–2
M8 x 30mm
Screw (56)–1
M10 x 80mm Screw/Bolt (54)–4
5
M6 x 36mm
Screw (69)–2
M8 x 40mm
Screw (58)–4
ASSEMBLY
• Assembly requires two persons.
• In addition to the included tool(s), assembly
requires the following tools:
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
one Phillips screwdriver
one adjustable wrench
• To identify small parts, see page 5.
Assembly may be easier if you have your own set
of wrenches. To avoid damaging parts, do not use
power tools.
1. Orient the Rear Stabilizer (31) as shown.
1
While a second person lifts the rear of the Frame
(1), attach the Rear Stabilizer (31) to the Frame
with two M10 x 80mm Bolts (54) and two M10
Jam Nuts (57).
57
31
1
54
2. Orient the Front Stabilizer (32) as indicated by
the sticker.
2
32
While a second person lifts the front of the
Frame (1), attach the Front Stabilizer (32) to the
Frame with two M10 x 80mm Screws (54).
1
6
54
3. Orient the Upright (2) as shown. Have a second
person hold the Upright near the Frame (1).
3
Locate the wire tie inside the Upright (2). Tie the
lower end of the wire tie to the ends of the Main
Wire (53) and the Frame Pulse Wire (42).
2
Wire Tie
Then, pull the other end of the wire tie upward
until the Main Wire (53) and the Frame Pulse
Wire (42) are routed completely through the
Upright (2).
42
Wire Tie
53
1
4. Tip: Avoid pinching the wires. Set the Upright
(2) on the Frame (1).
4
55
Attach the Upright (2) to the Frame (1) with four
M8 x 20mm Screws (55).
2
Avoid pinching
the wires
5. Orient the Shield Cover (12) as shown. Then,
insert the Main Wire (53) and the Frame Pulse
Wire (42) upward through the Shield Cover.
1
5
53
42
Slide the Shield Cover (12) onto the Upright (2).
Then, press the Shield Cover into the Right and
Left Frame Shields (38, 39).
12
2
39
38
7
6. Orient the Console Plate (11) as shown. Then,
insert the Main Wire (53) and the Frame Pulse
Wire (42) upward through the Console Plate.
6
11
53
Tip: Avoid pinching the wires. Insert the
Console Plate (11) into the Upright (2).
42
Orient the Handlebar (13) as shown. Tip: Avoid
pinching the wires. Attach the Handlebar and
the Console Plate (11) to the Upright (2) with two
M8 x 20mm Screws (55).
Avoid pinching
the wires
2
13
55
7. The Console (4) can use four D batteries
(not included); alkaline batteries are recommended. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before inserting batteries. Otherwise, you may damage
the console displays or other electronic
components.
7
Battery
Cover
4
Remove the battery covers from the back of the
Console (4), and insert batteries into the battery
compartments. Make sure to orient the batteries as shown by the diagrams inside the
battery compartments. Then, reattach the battery covers.
Battery
Cover
Receptacle
To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the console,
use only a manufacturer-supplied power
adapter. Plug one end of the power adapter into
the receptacle inside the battery compartment
on the console; plug the other end into an outlet
installed in accordance with all local codes and
ordinances.
8
8. While a second person holds the Console (4)
near the Upright (2), connect the wires on the
Console to the Main Wire (53) and to the Frame
Pulse Wires (42).
8
4
Insert the excess wire into the Upright (2) or into
the Console (4).
53 42
2
Tip: Avoid pinching the wires. Attach the
Console (4) to the Upright (2) with four M4 x
16mm Screws (61).
61
61
Avoid pinching
the wires
9. Orient the Adjustment Lever (15) as shown.
Attach the Adjustment Lever to the Brake Axle
(16) with two M5 x 16mm Screws (60).
9
16
15
60
10. Orient the Backrest Frame (5) as shown. Attach
the Backrest Frame to the Seat Carriage (3) with
an M8 x 20mm Screw (55) and an M8 x 30mm
Screw (56).
10
56
3
5
9
55
11. Orient the Seat (8) and Seat Frame (7) assembly
as shown. Attach the Seat Frame to the Seat
Carriage (3) with four M8 x 40mm Screws (58).
11
8
58
7
58
3
12. Orient the Backrest (6) as shown. Attach the
Backrest to the Backrest Frame (5) with two M6
36mm Screws (69).
12
6
69
5
13. Plug the Seat Frame Pulse Wire (22) into the
receptacle in the Left Seat Shield (41).
13
22
Receptacle
41
10
14. Identify the Right Pedal (36), which is marked
with an “R.”
14
43
Using an adjustable wrench, firmly tighten the
Right Pedal (36) clockwise into the right side of
the Crank (43).
Strap
36
Firmly tighten the Left Pedal (not shown) counterclockwise into the left side of the Crank (not
shown).
Tab
Adjust the right strap to the desired position, and
press the ends of the straps onto the tabs on the
Right Pedal (36). Adjust the strap on the Left
Pedal (not shown) in the same way.
15. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.
11
HOW TO USE THE EXERCISE BIKE
HOW TO ADJUST THE SEAT
HOW TO MOVE THE EXERCISE BIKE
The seat can be
adjusted forward
or backward to the
position that is the
most comfortable. To
adjust the seat, push
downward on the
adjustment handle,
slide the seat to the
desired position, and
then pull upward
on the adjustment
handle to lock the seat in place.
To move the exercise
bike, hold the handle
on the rear stabilizer
and carefully lift it
until the exercise
bike can be moved
on the front wheels.
Carefully move the
exercise bike to the
desired location and
then lower it.
Seat
Adjustment
Handle
HOW TO LEVEL THE EXERCISE BIKE
If the exercise bike
rocks slightly on your
floor during use, turn
one or both of the
leveling feet on the
rear stabilizer until
the rocking motion is
eliminated.
HOW TO ADJUST THE PEDAL STRAPS
To adjust the pedal
straps, first pull the
ends of the straps off
the tabs on the pedals. Adjust the straps
to the desired position, and then press
the ends of the straps
onto the tabs.
Handle
Pedal
Strap
Tab
12
Leveling
Feet
CONSOLE DIAGRAM
For example, lose unwanted pounds with the 8-week
Weight Loss workout. iFit workouts control the resistance of the pedals while the voice of a personal trainer
coaches you through your workouts. iFit cards are
available separately. To purchase iFit cards, go to
www.iFit.com or call 1-888-533-1333. iFit cards are
also available at select stores.
FEATURES OF THE CONSOLE
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable.
When you use the manual mode of the console, you
can change the resistance of the pedals with the touch
of a button. As you exercise, the console will provide
continuous exercise feedback. You can even measure
your heart rate using the handgrip heart rate monitor.
You can even connect your MP3 player or CD player
to the console sound system and listen to your favorite
music or audio books while you exercise.
The console offers eighteen preset workouts—nine
weight loss and nine performance workouts. Each
preset workout automatically changes the resistance
of the pedals and prompts you to vary your pedaling
speed as it guides you through an effective workout.
To use the manual mode, see page 14. To use a
preset workout, see page 15. To use an iFit workout, see page 16. To use the sound system, see
page 17. To use the user mode, see page 17.
Note: Before using the console, make sure that batteries are installed (see assembly step 7 on page 8).
If there is a sheet of plastic on the display, remove the
plastic.
The console also features the iFit interactive workout
system, which enables the console to accept iFit cards
containing workouts designed to help you achieve
specific fitness goals.
13
HOW TO USE THE MANUAL MODE
Profile—When a workout is selected, this display
mode will show a profile of the resistance settings
of the workout.
1. Turn on the console.
Press any button or begin pedaling to turn on the
console.
Pulse—This display mode will show your heart rate
when you use the handgrip heart rate monitor (see
step 5 on page 15).
When you turn on the console, the display will light.
A tone will sound and the console will be ready for
use.
Resistance (Res)—This display mode will show
the resistance level of the pedals for a few seconds
each time the resistance level changes.
2. Select the manual mode.
Speed—This display mode will show your pedaling
speed in miles per hour or kilometers per hour.
When you turn on the console, the manual mode will
be selected automatically.
Time—When the manual mode is selected, this
display mode will show the elapsed time. When a
workout is selected, this display mode will show the
time remaining in the workout.
If you have selected a
workout, reselect the manual
mode by pressing the 9 Wt.
Loss Workouts button or the
9 Perform. Workouts button repeatedly until a track
appears in the upper display.
Track—When the manual mode is selected, this
display mode will show a track representing 1/4
mile (400 m). As you exercise, indicators will
appear in succession around the track until the
entire track appears. The track will then disappear
and the indicators will again begin to appear in
succession.
3. Begin pedaling and change the resistance of
the pedals as desired.
As you pedal, change the
resistance of the pedals by
pressing the Resistance
increase and decrease
buttons.
Press the Display Mode
button repeatedly to view the
desired workout information.
To reset the display to zero,
press the On/Reset button.
Note: After you press the
buttons, it will take a moment
for the pedals to reach the
selected resistance level.
Note: The console can show
pedaling speed and distance
in either miles or kilometers.
To view or change the unit
of measurement, see THE USER MODE on page
17.
4. Follow your progress with the display.
The display can show the following workout
information:
Change the volume level of the
console by pressing the Volume
increase and decrease buttons.
Calories—This display mode will show the approximate number of calories you have burned.
Distance—This display mode will show the distance that you have pedaled in miles or kilometers.
14
5. Measure your heart rate if desired.
HOW TO USE A PRESET WORKOUT
If there are sheets
Contacts
of plastic on the
metal contacts
on the handgrip
heart rate monitor, remove the
plastic. In addition, make sure
that your hands
are clean. To
measure your heart rate, hold the handgrip heart
rate monitor with your palms resting against the
contacts. Avoid moving your hands or gripping
the contacts tightly.
1. Turn on the console.
Press any button or begin pedaling to turn on the
console.
When you turn on the console, the display will light.
A tone will sound and the console will be ready for
use.
2. Select a preset workout.
To select a preset workout, press the 9 Wt. Loss
Workouts button or the 9
Perform. Workouts button
repeatedly until the number of the desired workout
appears in the lower display.
When your pulse is detected, a heart-shaped
symbol will flash in the display and then your heart
rate will be shown. For the most accurate heart rate
reading, hold the contacts for at least 15 seconds.
Profile
When you select a preset
workout, a profile of the
resistance levels of the
workout will scroll across
the upper display, the duration of the workout will
appear in the center display, and the number of the
workout will appear in the lower display.
If your heart rate is not shown, make sure that your
hands are positioned as described. Be careful not
to move your hands excessively or to squeeze the
contacts tightly. For optimal performance, clean
the contacts using a soft cloth; never use alcohol,
abrasives, or chemicals to clean the contacts.
6. When you are finished exercising, the console
will turn off automatically.
3. Begin pedaling to start the workout.
Each workout is divided into several one-minute
segments. One resistance level and one goal
speed is programmed for each segment. Note: The
same resistance level and/or goal speed may be
programmed for consecutive segments.
If the pedals do not move for several seconds, a
series of tones will sound, the console will pause,
and the time will flash in the display.
If the pedals do not move for several minutes, the
console will turn off and the display will be reset.
During the workout, the workout profile will show
your progress (see the drawing above). The flashing segment of the profile represents the current
segment of the workout. The height of the flashing
segment indicates the resistance level for the current segment.
At the end of each segment of the workout, a
series of tones will sound and the next segment of
the profile will begin to flash. If a different resistance level is programmed for the next segment,
the resistance level will appear in the display for
a few seconds to alert you. The resistance of the
pedals will then change.
15
HOW TO USE AN IFIT WORKOUT
As you exercise, keep your
pedaling speed near the goal
speed for the current segment. The goal speed will
appear in the display when
the speed display mode is
selected.
iFit cards are available separately. To purchase iFit
cards, go to www.iFit.com or call 1-888-533-1333. iFit
cards are also available at select stores.
1. Turn on the console.
Press any button or begin pedaling to turn on the
console.
IMPORTANT: The goal
speed is intended only to
provide motivation. Your
actual pedaling speed may be slower than the
goal speed. Make sure to pedal at a speed that
is comfortable for you.
When you turn on the console, the display will light.
A tone will sound and the console will be ready for
use.
2. Insert an iFit card and select a workout.
If the resistance level for the current segment is
too high or too low, you can manually override
the setting by pressing the Resistance buttons.
IMPORTANT: When the current segment of the
workout ends, the pedals will automatically
adjust to the resistance level programmed for
the next segment.
To use an iFit workout, insert an iFit card into the
iFit slot; make sure that the iFit card is oriented so
that the metal contacts are face down and are facing the slot. When the iFit card is properly inserted,
the indicator next to the slot will light.
If you stop pedaling for several seconds, a series of
tones will sound and the workout will pause.
To resume the workout, simply resume pedaling.
The workout will continue until the last segment
of the profile flashes and the last segment of the
workout ends.
iFit Slot
iFit Card
4. Follow your progress with the display.
See step 4 on page 14.
Next, select the desired workout on the iFit card by
pressing the increase and decrease buttons next to
the iFit slot.
5. Measure your heart rate if desired.
See step 5 on page 15.
A profile of the resistance levels of the workout
will scroll across the upper display, the duration of
the workout will appear in the center display, and
the number of the workout will appear in the lower
display.
6. When you are finished exercising, the console
will turn off automatically.
See step 6 on page 15.
A moment after you select a workout, the voice of a
personal trainer will begin guiding you through your
workout. iFit workouts function in the same way as
preset workouts. To use the workout, see steps 3 to
6 starting on page 15.
3. When you are finished exercising, remove the
iFit card.
Remove the iFit card when you are finished exercising. Store the iFit card in a secure place.
16
HOW TO USE THE SOUND SYSTEM
2. Select a unit of measurement if desired.
To play music or audio books through the console
sound system while you exercise, plug the included
audio cable into the jack on the console and into a jack
on your MP3 player or CD player; make sure that the
audio cable is fully plugged in.
The console can show pedaling speed and distance in either miles or kilometers.
The upper display will show the selected unit of
measurement. An E for English miles or an M for
metric kilometers will appear in the upper display.
To change the unit of measurement, press the
Resistance decrease button repeatedly.
Next, press the Play button on your
MP3 player or CD player. Adjust
the volume level using the Volume
increase and decrease buttons on the
console or the volume control on your
MP3 player or CD player.
Note: When you replace the batteries, it may be
necessary to reselect the unit of measurement.
3. View console usage information if desired.
THE USER MODE
The center display will show the total number of
hours that the console has been used since the
exercise bike was purchased. The lower display
will show the total distance that the pedals have
moved since the exercise bike was purchased.
The console features a user mode that allows you to
select a unit of measurement for the console and to
view console usage information.
1. Select the user mode.
4. Exit the user mode.
To select the user mode,
press and hold down the
Display Mode button for a
few seconds until the user
mode information appears in
the display.
Press the Display Mode button to exit the user
mode.
17
MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the exercise bike regularly. Replace any worn parts immediately.
Next, locate the Reed Switch (46). Loosen, but do not
remove, the M4 x 16mm Screw (61).
To clean the exercise bike, use a damp cloth and a
small amount of mild soap. IMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
43
61
46
CONSOLE TROUBLESHOOTING
44
If the console display becomes dim, replace all the batteries at the same time; most console problems are the
result of low batteries. See assembly step 7 on page
8 for replacement instructions.
Next, rotate the Pulley (43) until a Magnet (44) is
aligned with the Reed Switch (46). Slide the Reed
Switch slightly toward or away from the Magnet. Then,
retighten the M4 x 16mm Screw (61).
If the console does not display your heart rate when
you use the handgrip heart rate monitor, see step 5 on
page 15.
HOW TO ADJUST THE REED SWITCH
Rotate the Pulley (43) for a moment. Repeat these
actions until the console displays correct feedback.
If the console does not display correct feedback, the
reed switch should be adjusted.
To adjust the reed switch,
you must first remove the
Shield Cover (12). Using
a flat screwdriver, release
the tabs on the Shield
Cover, and then lift the
Shield Cover away from
the frame.
When the reed switch is correctly adjusted, reattach
the shield cover.
12
18
Hold the two M8 Locknuts (67) and loosen the two
M8 x 16mm Flat Head Screws (73). Next, loosen the
M10 x 35mm Hex Screw (74) until the Drive Belt (49) is
tight. Then, hold the M8 Locknuts and tighten the M8 x
16mm Flat Head Screws.
HOW TO ADJUST THE DRIVE BELT
If you can feel the pedals slip while you are pedaling,
even when the resistance is adjusted to the highest
level, the drive belt may need to be adjusted.
To adjust the drive belt, you must remove the right
pedal, the shield cover, and the right frame shield (see
the instructions below).
49
Using an adjustable wrench, turn the right pedal counterclockwise and remove it.
See the HOW TO ADJUST THE REED SWITCH on
page 18 and remove the Shield Cover (12).
73
Next, see the EXPLODED DRAWING near the end of
this manual and remove the M4 x 16mm Screws (61)
from the Right and Left Frame Shields (38, 39). Then,
gently remove the Right Frame Shield.
67
74
Then, reattach the right frame shield, the top shield,
and the right pedal.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to
computer or peripheral devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
19
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning this
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The heart rate monitor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise—never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each week,
if desired. Remember, the key to success is to make
exercise a regular and enjoyable part of your everyday
life.
20
PART LIST
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
2
2
2
2
1
1
2
1
1
2
4
2
2
1
1
2
2
2
1
1
1
1
1
Model No. 831.21952.3 R0911C
Description
Key No. Qty.
Frame
Upright
Seat Carriage
Console
Backrest Frame
Backrest
Seat Frame
Seat
Carriage Rail
Pulse Sensor
Console Plate
Shield Cover
Handlebar
Adjustment Handle
Adjustment Lever
Brake Axle
Handgrip
Handlebar Cap
Square Cap
Backrest Frame Cap
Round Seat Frame Cap
Seat Frame Pulse Wire
Locking Grommet
Carriage Bumper
Brake
Brake Plate
Brake Spacer
Roller Axle
Upper Roller
Lower Roller
Rear Stabilizer
Front Stabilizer
Stabilizer Cover
Leveling Foot
Wheel
Right Pedal/Strap
Left Pedal/Strap
Right Frame Shield
Left Frame Shield
Right Seat Shield
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
*
*
*
1
1
1
2
1
1
1
1
1
1
1
1
1
4
7
1
2
4
1
2
18
8
10
10
2
2
6
4
6
2
1
1
2
1
4
1
–
–
–
Description
Left Seat Shield
Frame Pulse Wire
Crank/Pulley
Magnet
Bearing Assembly
Reed Switch
Clamp
Resistance Mechanism
Drive Belt
Idler
Resistance Motor
Resistance Cable
Main Wire
M10 x 80mm Screw/Bolt
M8 x 20mm Screw
M8 x 30mm Screw
M10 Jam Nut
M8 x 40mm Screw
M4 x 16mm Bright Screw
M5 x 16mm Screw
M4 x 16mm Screw
M6 x 25mm Screw
M6 Split Washer
M6 Washer
1/4" x 1/2" Screw
M6 x 16mm Screw
M8 Locknut
M8 x 42mm Bolt
M6 x 36mm Screw
M10 x 41mm Shoulder Screw
M10 Flange Nut
M8 Flange Nut
M8 x 16mm Flat Head Screw
M10 x 35mm Hex Screw
M4 x 12mm Screw
Audio Cable
Jumper Wire
Assembly Tool
User’s Manual
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. If a part is missing, call 1-888-533-1333. *These parts are not illustrated.
21
69
22
69
20
5
6
20
22
27
66
64
21
26
16
60
29 30
27 28
62 63
3
56
23
58
63
64
25
7
10
64
29
63
15
68
64
28
63
62
30 67
64
63
65
55
69
58
19
8
62
61
24
10
9
76
21
14
61
24
13
67
68
4
55
18
17
12
11
18
2
61
55
EXPLODED DRAWING A
Model No. 831.21952.3 R0911C
23
34
61
33
61
54
31
61
39
61
37
37
41
52
34
57
61
57
71
61
48
46
1
45
33
67
42
74
61
61 47
59
50
51
75
40
73
72
73
45
49
44
70
61
53
35
44
61
43
32
38
54
61
61
35
36
36
70
EXPLODED DRAWING B
Model No. 831.21952.3 R0911C
90 DAY FULL WARRANTY
If this Sears Bike Exerciser fails due to a defect in material or workmanship within 90 days of the date of
purchase, call 1-800-4-MY-HOME® (1-800-469-4663) to arrange for free repair (or replacement if repair
proves impossible). There is a 7 year warranty on the frame.
This warranty does not apply when the Bike Exerciser is used commercially or for rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Part No. 319700 R0911C
Printed in China © 2011 ICON IP, Inc.