Samsung DS-5012L Product specifications

Digital Phone Quick Reference Guide
DS-5012L
SAFETY CONCERNS
For product safety and correct operation, the following information must be given to the
operator/user and shall be read before the installation and operation.
Conventions
WARNING
Provides information or instructions that you should follow in order to avoid personal injury
WARNING
or fatality.
CAUTION
Provides information or instructions that you should follow in order to avoid a service failure
CAUTION
or damage to your phone.
NOTE
Indicates additional information for reference.
Symbols
Caution
Indication of a general caution
Restriction
Indication of a prohibited action for the phone
Instruction
Indication for commanding a specifically required action
2
© SAMSUNG Electronics Co., Ltd.
WARNING
The DS-5012L digital phone is only for connection
to SELV systems.
The handset receiver on the phone may retain
metallic objects. Care should be taken when using the
handset in the vicinity of small metal objects.
Avoid placing objects containing water such as
vases, cups, cosmetics, and medicines near the
phone.
Moisture in the phone may cause a fire and electric shocks.
Do not place the phone in a dusty area or areas with
extreme or volatile changes in temperature.
It may cause a fire or electric shocks.
Do not install the phone near a heater or
flames(cigarette lighter, heating apparatus, etc.).
It may cause a fire or electric shocks.
Do not use flammable solvent or materials
near the phone. Do not store them near the phone.
It may cause a fire or electric shocks.
© SAMSUNG Electronics Co., Ltd.
3
If the phone makes excessive noise,
emits an odour, or smoke, immediately unplug
the phone and call your Authorised Samsung
Reseller.
CAUTION
Use a soft dry cloth to clean the phone.
Do not use any chemical solvents like wax, benzene,
alcohol, thinner, aerosols, lubricant, or detergent.
The use of chemicals on the phone may cause
fading/discoloring or damage to the parts.
Do not place heavy things on the phone.
It may cause damage to some parts.
Do not install the phone on an unstable surface
or in direct sunlight.
It may cause severe damage to the plastic case of
the phone, and reduced the performance of your phone.
Do not separate, repair or remodel the phone
arbitrarily.
If a repair is needed, please contact your
Authorised Samsung Reseller.
4
© SAMSUNG Electronics Co., Ltd.
TABLE OF CONTENTS
SAFETY CONCERNS
Conventions..................................................................................................................................... 2
Symbols........................................................................................................................................... 2
Warning ........................................................................................................................................... 3
Caution ............................................................................................................................................ 3
PREPARATION
Main Features.................................................................................................................................. 6
Front View of the Phone .................................................................................................................. 9
Connecting Lines to the Phone...................................................................................................... 10
THINGS YOU SHOULD KNOW
Volume Adjustment.........................................................................................................................11
Entering Characters....................................................................................................................... 13
Telephone Status Indicator ............................................................................................................ 16
Button LED .................................................................................................................................... 16
USING THE FEATURES
Making a Call................................................................................................................................. 17
Answering a Call............................................................................................................................ 22
Features Used During a Call ......................................................................................................... 24
APPLICATION MENUS
Navigation Buttons ........................................................................................................................ 29
Entering Application Menus ........................................................................................................... 31
ANNEX
Troubleshooting ............................................................................................................................. 33
Product Specifications ................................................................................................................... 35
© SAMSUNG Electronics Co., Ltd.
5
PREPARATION
PREPARATION
Main Features
THINGS YOU SHOULD KNOW
Large LCD Screen
Displays various kinds of information, and you can simply press the
related [Selection] button next to the feature/menu. This feature provides
easy search and selection of menus and features.
USING THE FEATURES
Application menu
Allows you to easily check the phone functions(Phonebook, E-Diary,
Message, Volume, Forward, Config., and My Phone) with an icon or
menu on the LCD screen just like a mobile cellular phone. You can use
the Application menu to search any long text displayed on the LCD
panel.
APPLICATION MENUS
Speed Dial
For further convenient use of your phone, you can program your
frequently used phone numbers into the phone’s Phone Book. For
important numbers, you can press one dial button to make a call to the
speed dial number.
Pickup
ANNEX
You can answer a call at another extension.
6
© SAMSUNG Electronics Co., Ltd.
Automatic Redial/Retry
PREPARATION
When your call is important but your party is busy on another call you
can use automatic redial/retry function. The digital phone redials the
called number automatically until your party is free to take your call.
Hold
THINGS YOU SHOULD KNOW
You can use the Hold function when you need something or another call
is arrives. Use this button to temporally hold the current call until you are
ready to resume the call. You can even pickup the held call at another
station.
Conference Calls
USING THE FEATURES
This button is used when multiple parties need to be connected
simultaneously during a phone conversation. Up to five parties including
you can be connected in a conference call.
Call Forwarding
If you cannot answer an incoming call, the call can be forwarded to
another extension(unconditionally, while you are busy on a call, or when
you are away from your phone).
APPLICATION MENUS
Do Not Disturb
When you do not want to be disturbed, the DND function can be set to
block incoming calls and the phone will not ring. Your calls can be
forwarded to another station when you cannot be disturbed.
ANNEX
Paging
If you have an urgent announcement to make, or you wish to locate a
colleague, you can page through the speaker of other stations, or
through optional external speakers.
© SAMSUNG Electronics Co., Ltd.
7
PREPARATION
Executive/Secretary
When the Executive/Secretary button is pressed once, the executive and
his/her secretary can be connected.
The secretary can use this Executive/Secretary feature to receive an
incoming call and then simply forward it to the executive.
THINGS YOU SHOULD KNOW
Call ID
When there is an incoming call, the caller ID or name will be displayed
on the LCD screen. You can see who is calling before answering the call
and respond accordingly.
USING THE FEATURES
NOTE
If you have any questions or concerns regarding the features which are not introduced in
this user guide, refer to the User Guide at e-manual site(http://www.samsungdocs.com).
APPLICATION MENUS
ANNEX
8
© SAMSUNG Electronics Co., Ltd.
Front View of the Phone
PREPARATION
Selection Buttons
LCD screen
Status Indicator
Speaker
THINGS YOU SHOULD KNOW
Selection Buttons
Screen Button
Volume Button
Scroll Key
Conference Button
Transfer Button
Dial Buttons
Speaker Button
Hold Button
Microphone
Navigation Buttons
USING THE FEATURES
APPLICATION MENUS
ANNEX
© SAMSUNG Electronics Co., Ltd.
9
Connecting Lines to the Phone
PREPARATION
1 Connect the handset to the handset connection port.
2 Connect the line cord to the phone line connection port.
3 To connect a recording device to the phone, connect the recording device connection
port(REC) to your recorder.
THINGS YOU SHOULD KNOW
• The recording device jack can be connected to the recorder.
• The recording device can record the phone conversation.
4 To use the Samsung Network SYNC program by connecting PC to the phone,
connect one end of the data cable to the USB connection port of the phone and
connect the other end to the USB port of PC.
• The users who wish to use the Samsung Network SYNC program should refer to the User Guide.
USING THE FEATURES
APPLICATION MENUS
ANNEX
10
© SAMSUNG Electronics Co., Ltd.
PREPARATION
THINGS YOU SHOULD KNOW
Volume Adjustment
THINGS YOU SHOULD KNOW
The [TVolumeS] button is used for adjusting the volume of the handset, speaker, and ringer.
Adjusting Handset Volume
1 During a call using the handset, press
the [VolumeS] button to increase the
handset volume.
USING THE FEATURES
2 Press the [TVolume] button to decrease
the handset volume.
APPLICATION MENUS
ANNEX
© SAMSUNG Electronics Co., Ltd.
11
Adjusting Speaker Volume
PREPARATION
1 During a call using the [Speaker] button, press
the [VolumeS] button to increase the speaker
volume.
THINGS YOU SHOULD KNOW
2 Press the [TVolume] button to decrease
the speaker volume.
USING THE FEATURES
Adjusting Ring Volume
1 To increase the ring volume, press the
[VolumeS] button while the phone is ringing.
APPLICATION MENUS
2 To decrease the ring volume, press the
[TVolume] button while the phone is ringing.
ANNEX
12
© SAMSUNG Electronics Co., Ltd.
Entering Characters
PREPARATION
Using the dial buttons and the navigation buttons of this phone, you can easily enter/edit,
letters, numbers and special characters.
Selecting an Input Mode
THINGS YOU SHOULD KNOW
When the input screen appears, press the [Menu] button until the required input mode
is selected.
y Example of Character Input Screen
USING THE FEATURES
: Alphabet Capital Letters Input Mode
: Alphabet Lowercase Input Mode
: Numeric Input Mode
: Special Characters Input Mode
APPLICATION MENUS
NOTE
The default input mode is set to English.
ANNEX
© SAMSUNG Electronics Co., Ltd.
13
Entering Letters of the Alphabet
PREPARATION
1 Press the [Menu] button to select the alphabet input mode.
direction button to move a cursor.
Use the
THINGS YOU SHOULD KNOW
2 Then, press the dial buttons to modify or insert the desired letters.
direction
If the letter to enter is the same as the previous character, press the
button to move the cursor one space to the right or wait until the cursor moves automatically
after a 3 second delay.
The location of alphabet letters on dial buttons is as follows.
Dial Button
Alphabet
Dial Button
Alphabet
Dial Button
Alphabet
USING THE FEATURES
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
*/.
#@-
- Press the button repetitively until the desired alphabet letter appears.
APPLICATION MENUS
e.g.) Press
Press
twice to enter K.
three times to enter L.
- To enter another letter from the same button sequentially, enter the first letter,
wait for about 3 seconds, and then press the button again.
• Press the
direction button to insert blank.
ANNEX
• To insert a blank between the entered characters, press the
direction buttons
to move a cursor to a character that will be right next to the blank, and press the dial button [0] once.
- Press the [Cancel] button to delete any characters one by one.
Press the [Cancel] button for more than 2 seconds to delete all characters.
14
© SAMSUNG Electronics Co., Ltd.
Entering Special Characters
PREPARATION
1 Press the [Menu] button to select the special character input mode.
2 Then, the special characters that can be selected will be displayed on the lower part
of the character input screen.
the [Enter] button. Or press
characters.
NOTE
THINGS YOU SHOULD KNOW
direction button, to select the special characters and press
Press
direction button to select another type of special
- Press the dial button [0] to insert a blank.
USING THE FEATURES
- Press the [Cancel] button to delete special characters one by one.
Press the [Cancel] button for more than 2 seconds to delete all characters.
Entering Numbers
Press the [Menu] button to select the numeric input mode and then press the dial button
associated with the desired number.
APPLICATION MENUS
ANNEX
© SAMSUNG Electronics Co., Ltd.
15
Telephone Status Indicator
PREPARATION
The status indicator turns on or off according to the telephone status.
THINGS YOU SHOULD KNOW
Status Indicator
Situation
USING THE FEATURES
Busy
Steady red.
Station Ring
Flashing red.
Trunk Ring
Flashing blue.
Recall Ring
Flashing purple.
Message Camp On
Flashing red.
DND
Fast flashing red within 1 second interval.
Button LED
APPLICATION MENUS
The [Transfer] button, [Hold] button, and [Speaker] button have a LED that turns on or
off according to the phone status.
Button LED
ANNEX
16
LED Status
Function
Steady red
When ‘Forward All Calls’ is set or a Follow me has been set.
Flashing red
When the phone is locked for any outgoing Trunk call.
Steady red
When the entire phone is locked.
Steady red
When the phone is used as a speakerphone.
© SAMSUNG Electronics Co., Ltd.
PREPARATION
USING THE FEATURES
Making a Call
Calling an Extension Number
This function is used when you want to make a call to other stations.
1 Pick up the handset and check for dial tone.
• Or, press the [Selection] button corresponding to the extension
number in the programmable feature screen.
APPLICATION MENUS
3 Press the [Send] button and ring tone will be heard.
• If beep tones are heard, without ring tone, the station you
called is set for a voice announcement or an automatic
answer function. After the beep tones end, you can speak
to the called party through their station speaker.
ANNEX
4 Begin speaking after the other party answers.
© SAMSUNG Electronics Co., Ltd.
USING THE FEATURES
2 Dial the extension number of the other party.
THINGS YOU SHOULD KNOW
This function is used when you want to make a call to other stations or to make an external call.
17
Calling an Outside number
PREPARATION
This function is used when you want to make an external call.
1 Lift the handset and dial the trunk access code [0]
and then dial the telephone number of outside party.
THINGS YOU SHOULD KNOW
• Or, press the [Selection] button corresponding to the trunk
line required in the programmable feature screen and dial
the outside telephone number.
2 Press the [Send] button to make the call.
USING THE FEATURES
3 Begin speaking after the other party picks up
the phone.
APPLICATION MENUS
ANNEX
18
© SAMSUNG Electronics Co., Ltd.
Using a Speakerphone
PREPARATION
This function is used when you make a call with a speakerphone.
THINGS YOU SHOULD KNOW
1 Dial the extension number(or the trunk access
code followed by the telephone number) without
lifting the handset and press [Send] button.
2 Listen to the speaker to hear a voice of the
other party and speak through the microphone.
• Listen to the speaker to hear a voice of the other party and
speak through the microphone.
USING THE FEATURES
3 Finish the call, by pressing the [Speaker] button.
New Call
1 While on a call, press the [Selection] button corresponding
to [NEW] menu displayed on the LCD screen. This will
disconnect the current call and provide dial tone.
APPLICATION MENUS
This function allows you to disconnect the existing call and make a new call on the same line.
ANNEX
2 Dial an outside telephone number and press
the [Send] button.
© SAMSUNG Electronics Co., Ltd.
19
Redial
PREPARATION
This function allows you to redial the last external number dialled.
THINGS YOU SHOULD KNOW
1 When the phone is in standby mode, press
the [Screen] button repeatedly until the Soft menu
screen appears.
2 Press the [Selection] button corresponding to
[LAST REDIAL] displayed on the Soft menu screen.
USING THE FEATURES
3 Begin speaking after the other party picks up the phone.
APPLICATION MENUS
ANNEX
20
© SAMSUNG Electronics Co., Ltd.
Saving the Telephone Number
PREPARATION
You can save the current dialled external number for later use and redial the number.
THINGS YOU SHOULD KNOW
Press the [Selection] button for [SAVE/REPEAT]
before hanging up the call, to save the phone
number that has just been called.
Redialling the Saved Number
You can redial the saved number anytime.
USING THE FEATURES
Press the [Selection] button for [SAVE/REPEAT]
in the Soft Menu screen or press [1]►[7].
• [1][7] is the function code for redialling the saved number.
NOTE
The saved number is stored in memory until you save another external number.
APPLICATION MENUS
ANNEX
© SAMSUNG Electronics Co., Ltd.
21
Answering a Call
PREPARATION
This function is used when you want to answer an intercom call or outside call.
Using a Handset
THINGS YOU SHOULD KNOW
This function is used when you answer a call with a handset.
1 When the phone rings, a call receipt message
will be displayed on the LCD screen.
USING THE FEATURES
2 Lift the handset and the ringing call will be
automatically connected you.
3 Replace the handset after a conversation is over.
APPLICATION MENUS
ANNEX
22
© SAMSUNG Electronics Co., Ltd.
Using a Speakerphone
PREPARATION
This function is used when you answer a call with a speakerphone.
1 Press the [Send] button without lifting the handset.
THINGS YOU SHOULD KNOW
2 Listen to the speaker to hear a voice of the other
party and speak through the microphone.
• You can switch from the speakerphone to the handset by
lifting the handset.
3 Finish the call, by pressing the [Speaker] button.
USING THE FEATURES
NOTE
Press the [TVolumeS] button while the phone is ringing to adjust the ringer volume.
Call Pickup
APPLICATION MENUS
This function is used when you pickup a call that is ringing at another station.
1 When you hear an unattended ringing station
lift the handset.
ANNEX
2 Press [6]►[5], the function code for call pickup.
3 Dial the extension number of the ringing phone.
© SAMSUNG Electronics Co., Ltd.
23
Features Used During a Call
PREPARATION
These convenient functions may be used during a call.
Hold an Intercom Call
THINGS YOU SHOULD KNOW
You can put the other party on hold if another call arrives or you wish to use both hands for
another task and resume the call later.
1 Press [Hold] button and replace the handset to
put the current call on hold.
• The intercom call is placed into exclusive hold and cannot
be retrieved at another station.
USING THE FEATURES
2 To call again, press the blinking [CALL] button
in the programmable feature screen.
APPLICATION MENUS
ANNEX
24
© SAMSUNG Electronics Co., Ltd.
Hold an Outside Call
PREPARATION
You can put the other party on hold if another call arrives or you wish to use both hands for
another task and resume the call later.
1 Press [Hold] button and put the call on hold.
THINGS YOU SHOULD KNOW
2 Press the [Screen] button until the Programmable
Feature screen is displayed.
USING THE FEATURES
3 The number of the Trunk line call, which is on hold,
blinks on the Programmable Feature screen.
Press the [Selection] button of the blinking Trunk line
number to resume the call.
APPLICATION MENUS
4 Resume conversation.
NOTE
- If the [Hold] button is pressed once, you can reconnect to the party on hold from
another phone.
© SAMSUNG Electronics Co., Ltd.
ANNEX
- If the [Hold] button is pressed twice, you can reconnect to the party on hold only
from the original phone.
25
Mute
PREPARATION
During a call you can mute the handset transmitter or microphone while still listening to the
other party.
THINGS YOU SHOULD KNOW
1 Press the [Selection] button for [MUTE] displayed
on the screen.
2 Press the [Selection] button for [MUTE(OFF)] to clear
the Mute function.
USING THE FEATURES
APPLICATION MENUS
ANNEX
26
© SAMSUNG Electronics Co., Ltd.
Transferring a Call
PREPARATION
While on an external call you can transfer the call to another internal or outside party.
1 Press [Transfer] button during the call.
THINGS YOU SHOULD KNOW
2 Dial the station/external number
to which the call should be transferred.
NOTE
USING THE FEATURES
3 Press the [End] button or replace the handset
to immediately transfer the call or wait for the
called party to answer and announce the
transfer before disconnecting the call.
APPLICATION MENUS
- If the recipient of the transferred call does not answer or rejects the transfer, the call
will recall to you.
- You can also press the [Transfer] button to reconnect to the outside caller.
- If the station you wish to transfer the call to is busy, you can camp-on the caller
to the busy station by pressing the [End] button. The busy station will receive off
hook ring to indicate a camp-on call.
ANNEX
© SAMSUNG Electronics Co., Ltd.
27
Conference Calls
PREPARATION
You can make a conference call of up to 5 parties including yourself. The OfficeServ system also.
1 Press [Conference] button while on a call.
You will hear conference tone.
THINGS YOU SHOULD KNOW
2 Dial the number of the internal or external party you
wish to add to the conference, wait for them to answer
and press [Conference] button again.
USING THE FEATURES
3 Dial the number of another internal or external party
to be added to the conference or press the [Conference]
button to begin the conference.
The conference connection status of all the numbers
is displayed.
APPLICATION MENUS
NOTE
If you press [Transfer] button and dial the conference function code [4][6], you can
use the conference function to add additional parties.
ANNEX
28
© SAMSUNG Electronics Co., Ltd.
PREPARATION
APPLICATION MENUS
Navigation Buttons
THINGS YOU SHOULD KNOW
Navigation buttons are provided for your convenience.
USING THE FEATURES
Menu Button
When the [Menu] button is pressed in the standby mode, the phones application menus
are displayed as icons.
NOTE
APPLICATION MENUS
If the [End] button or [Speaker] button is pressed in the application menus, the phone
automatically exits the menus.
Send Button
© SAMSUNG Electronics Co., Ltd.
ANNEX
- The phone is set to ‘Enbloc’ dialling mode as default. So, when you enter phone numbers,
they can be reviewed before dialling. Press the [Send] button to dial the number.
- Answers incoming calls.
- Dials the most recently called number when pressed and held. If the [Send] button is
pressed briefly in the standby mode, your recent calls are listed on the screen.
29
Enter button
PREPARATION
The Enter button is used in the menu mode to select or save the corresponding item.
Direction button
THINGS YOU SHOULD KNOW
These buttons are used when editing menu entries, or when moving between menu items.
[ ∧ ] button is used
- To move the cursor upward.
- To select the main menu.
[ > ] button is used
- To select the Phonebook menu.
- To move the cursor to the right.
USING THE FEATURES
[ ∨ ] button is used
- To select the Ring Type/Volume menu.
- To move the cursor downward.
- When moving to the lower menu item of the current menu.
[ < ] button is used
APPLICATION MENUS
- To select the Text Message menu.
- To move the cursor to the left.
Cancel button
- Moves to the previous page of a menu.
- Deletes the entered letter or number.
ANNEX
End
- Disconnects the current call.
- Exits from the current mode to the idle screen.
30
© SAMSUNG Electronics Co., Ltd.
Entering Application Menus
PREPARATION
When the phone is in the standby mode, press the [Menu] button. The main application menu
will appear on the LCD screen.
THINGS YOU SHOULD KNOW
How to Select Menu
USING THE FEATURES
- Use the direction button to move to the desired application.
Then, press the [Enter] button.
- Dial the corresponding to the number of the required menu item.
(P-Book[1], E-Diary[2], Message[3], Volume[4], Forward[5], Config[6], My-Phone[7])
- Press the [End] button to exit the application menus.
APPLICATION MENUS
NOTE
When If there is a black mark at the bottom right of the LCD panel, you can press the
[Menu] button for other functions.
DND
Click [Menu] button
ANNEX
© SAMSUNG Electronics Co., Ltd.
31
Application Menus
PREPARATION
The main menus and their sub menus are shown as follows.
THINGS YOU SHOULD KNOW
Main Menu
USING THE FEATURES
APPLICATION MENUS
ANNEX
32
Sub Menu
Main Menu
Sub Menu
Phone Book
1. Search
2. Outgoing Calls
3. Incoming Calls
4. New number
5. Edit Group
6. Delete all
Call Forward
E-diary
1. Wakeup call
2. Alarm
3. Daily planner
4. Memo pad
5. Calculator
6. World Time
7. D-Day Plus
8. Unit Convert
Configuration
1. Password
2. Locked
3. Answering Mode
4. Boss Answering
5. LANGUAGE
6. CID Display
7. Absent Msg.
8. Internal Call
9. Dial Mode
0. Station On/Off
Text Message
1. Received
2. Write & Sent
3. Draft
My Phone
1. Select BG
2. My Name
3. Status Info
4. Enbloc Timeout
5. News Color
6. Privacy Option
7. Config. Reset
8. Version Info
Ring Type/Volume
1. Ring Type
2. Ringer
3. OffHook Ring
4. Handset
5. Speaker
6. BGM
7. Page
© SAMSUNG Electronics Co., Ltd.
PREPARATION
ANNEX
Troubleshooting
THINGS YOU SHOULD KNOW
Possible problems and troubleshooting steps for your phone are described below.
Check the troubleshooting steps before contacting your Authorised Samsung Reseller.
Dial tone is not heard when you lift the handset or press the [Speaker] button.
- If the phone’s dial mode is set to ‘Enbloc’, you will hear dial tone only after
pressing the [Send] button. You should consult the System Administrator.
USING THE FEATURES
- Check if the handset and phone line are correctly connected to each port of
the DS-5012L phone.(Refer to ‘Connecting Lines to the Phone’ section of
‘Preparation’ in this guide.)
Nothing appears on the LCD screen while the DS-5012L phone is being used.
Check if the phone line is correctly connected to the port of the DS-5012L phone.
(Refer to ‘Connecting Lines to the Phone’ section of ‘Preparation’ in this guide.)
APPLICATION MENUS
The DS-5012L phone does not ring and volume is too low.
Press the [TVolumeS] button to adjust the volume.
(Refer to ‘Volume Adjustment’ section of the ‘Things You Should Know’ section in
this guide.)
ANNEX
Conversation quality is reduced due to noise and echo.
If you are using the speakerphone, lift the handset and try speaking.
© SAMSUNG Electronics Co., Ltd.
33
Excessive echo is heard during a page announcement or with Auto Answer set.
PREPARATION
If the phones are too close to each other, sound from one speaker might echo
during a page or on auto answer call.
Keep a reasonable distance(about 1m) between phones.
THINGS YOU SHOULD KNOW
An alarm does not ring at the programmed time.
- Check the current time is set on the DS-5012L phone correctly. If the current time
setting needs to be changed, consult the System Administrator.
- Check if an alarm is set. You should consult the System Administrator.
Caller IDs are not displayed on the LCD screen.
USING THE FEATURES
- Confirm with your System Administrator that the caller ID service is available from
your Telephone Company.
- If the caller blocks the sending of their caller ID, the caller ID will not be displayed.
- If the caller makes a call from an area where the caller ID cannot be provided
(e.g. international calls), the caller ID will not be displayed.
- If the caller makes a call from a public phone, the caller ID will not be displayed.
- If the caller ID received from the Telephone Company is corrupt, the caller ID will
not be displayed.
APPLICATION MENUS
- If the Telephone Company does not send a caller ID, the caller ID will not be
displayed.
ANNEX
34
© SAMSUNG Electronics Co., Ltd.
Product Specifications
PREPARATION
The specifications and features of the DS-5012L digital phone are as follows.
Specification
Items
Model
DS-5012L
Size(mm)
1.1
266(width)×206(length)×122(height)
Operating Temperature(°C)
0 to 45
Operating Humidity(%)
10 to 90 non condensing
Number of the [Selection] buttons
12
Navigation Buttons
O
Speakerphone
LCD
THINGS YOU SHOULD KNOW
Weight(kg)
Full Duplex mode
Graphic LCD(320×240 pixel)
USING THE FEATURES
CLASS B(Digital device or Peripheral)
APPLICATION MENUS
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to International Standards EN55022, and EN61000, Part 15 of the FCC
Rules and Australian Standard AS/NZS3548. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
© SAMSUNG Electronics Co., Ltd.
ANNEX
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or experienced radio TV technician for help.
35