Samsung TC300 3 Series User manual

TC300
LED TV MONITOR
(MFM TV)
user manual
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and speciications may be changed without notice.
Digital LED display notice
1.
2.
3.
4.
5.
6.
Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals are
broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your local
dealer the possibility to receive DVB-T or DVB-C signal.
DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast
transmission of digital LED display over cable.
Although this LED display set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital
terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.
Depending on the countries/areas where this LED display set is used some cable-TV providers may charge an additional fee for such a service and
you may be required to agree to terms and conditions of their business.
Some Digital LED display functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service
providers.
For more information, please contact your local Samsung customer care centre.
✎ The reception quality of LED display may be affected due to differences in broadcasting method between the countries. Please check the LED
display performance in the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconiguring LED
display setting or not.
Still image warning
Avoid displaying still images (like jpeg picture iles) or still image element (like LED display programme logo, panorama or 4:3 image format, stock or news
bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of screen, which will affect image quality. To reduce risk of
this effect, please follow below recommendations:
Avoid displaying the same LED display channel for long periods.
Always try do display any image on full screen, use LED display set picture format menu for best possible match.
Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
Frequently use all LED display features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in ire or a problem with the product due to an increase in the internal temperature of the product.
✎
✎
The actual appearance of the LED display may differ from the images in this manual, depending on the model.
Be careful when you touch the LED display. Some parts can be somewhat hot.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
An administration fee may be charged if either
– (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
– (b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is carried out.
English
2
Contents
Getting Started
4
Connections
14
Basic Features
19
Advanced Features
Other Information
Safety Precautions
Accessories
Viewing the Control Panel
Viewing the Remote Control
14
14
15
16
17
19
Connecting to an Antenna
Setup (Initial Setup)
Connecting to an AV Device
Connecting to a COMMON INTERFACE slot
Connecting to a Audio device and PC
Changing the Input Source
19
20
20
22
23
25
27
30
How to Navigate Menus
Using the INFO button (Now & Next guide)
Using the Channel Menu
Channel Menu
Picture Menu
Sound Menu
System Menu
Support Menu
31 Using the Media Play
38
39
40
41
45
ENGLISH
31
38
4
11
12
13
Analogue Channel Teletext Feature
Attaching a Wall Mount/Desktop Stand
Anti-theft Kensington Lock
Troubleshooting
Speciications
Check the Symbol!
t
This function can be used by pressing the TOOLST
button on the remote control.
Note
Indicates additional information.
English
3
Getting Started
Safety Precautions
Icons used for safety precautions
WARNING
Failing to follow the precautions marked with this sign may result in a serious injury or even
a fatality.
CAUTION
Failing to follow the precautions marked with this sign may result in a personal injury or
property damage.
Do not perform.
Must be followed.
This symbol indicates that high voltage is present
inside. It is dangerous to make any kind of contact
with any internal part of this product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol alerts you that important literature
concerning operation and maintenance has been
included with this product.
¦ Power Related
✎
The following images are for your reference and may differ depending on models and countries.
Warning
Avoid using a damaged power cord
or plug or a loose power outlet.
x Otherwise, it may result in
electric shock or ire.
Avoid connecting multiple electric
appliances to a single wall outlet.
x Otherwise, it may result in ire due
to overheating of the wall outlet.
Avoid plugging in or unplugging the
power supply with wet hands.
x Otherwise, it may result in
electric shock.
Plug the power plug in irmly.
x Otherwise, it may result in ire.
!
Make sure to connect the power
cord to a grounded wall outlet (for
insulation class 1 equipment only).
x Otherwise, it may result in
electric shock or injury.
!
Avoid bending or twisting the power
cord excessively and avoid placing
heavy objects on the cord.
x Otherwise, it may result in electric
shock or ire due to a damaged
power cord.
English
4
Getting Started
!
!
If the product generates a strange
noise, a burning smell, or smoke,
unplug the power plug immediately
and contact a service centre.
x Otherwise, it may result in
electric shock or ire.
Avoid letting children hang or climb
onto the product.
x Otherwise, it may result in the
product falling and this may result
in injury or death.
If you drop the product or the case
is damaged, turn the power off and
unplug the power cord. Contact a
service centre.
x Otherwise, it may result in ire or
electric shock.
Avoid placing objects such as toys
and cookies on top of the product.
x If a child hangs over the product
to grab an object, the object or
the product may fall and this may
result in injury or even death.
When thunder or lighting occurs,
unplug the power cord and under
no circumstance touch the antenna
cable as this is dangerous.
x Otherwise, it may result in
electric shock or ire.
Avoid dropping an object over the
product or cause impact to the
product.
x Otherwise, it may result in electric
shock or ire.
Avoid moving the product by pulling
the power cord or antenna cable.
x Otherwise, it may result in
electric shock, ire or a problem
with the product due to damage
to the cable.
Avoid lifting up or moving the
product by holding only the power
cord or signal cable.
x Otherwise, it may result in
electric shock, ire or a problem
with the product due to damage
to the cable.
Take care not to block the vent by a
table cloth or curtain.
x Otherwise, it may result in ire
due to internal overheating.
!
GAS
!
When a gas leak occurs, do not touch
the product or the power plug and
ventilate immediately.
x A spark may result in an
explosion or ire.
x During a thunder or lighting
storm, do not touch the power
cord or antenna cable.
Avoid using or placing inlammable
spray or objects near the product.
x This may result in an explosion
or ire.
!
100
Avoid inserting metal objects such
as a chopsticks, coins or hairpins, or
inlammable objects into the product
(the vents, ports, etc).
x If water or substances enters
the product, turn the power
off, unplug the power cord and
contact a service centre.
x Otherwise, it may result in a
problem with the product, electric
shock or ire.
English
8
Getting Started
Keep the small accessories in a
location out of the reach of children.
!
!
Avoid placing a heavy object over
the product.
x Otherwise, it may result in a
problem with the product or
injury.
!
Be careful that children do not place
the batteries in their mouths when
removed from the remote control.
Place the battery in a location that
children or infants cannot reach.
x If children have had the battery
in their mouths, consult your
doctor immediately.
Use only speciied standard
batteries. Do not use new and used
batteries together.
x This may cause a battery to
break or leak and may cause
ire, injury, or contamination
(damage).
!
Take care when adjusting the angle of
the product or the height of the stand.
x If your hand or inger is caught,
you may be injured.
x If the product is tilted excessively,
the product may fall and this may
result in injury.
When replacing the batteries, insert
them with right polarity (+, -).
x Otherwise, the battery may
become damaged or it may
cause ire, personal injury or
damage due to leakage of the
internal liquid.
The batteries (and rechargeable
batteries) are not ordinary refuse
and must be returned for recycling
purposes. The customer is
responsible for returning the used or
rechargeable batteries for recycling.
x The customer can return used
or rechargeable batteries to a
nearby public recycling centre or
to a store selling the same type
of the battery or rechargeable
battery.
English
10
Getting Started
Accessories
✎ Please make sure the following items are included with your LED display. If any items are missing, contact your dealer.
✎ The items’ colours and shapes may vary depending on the models.
✎ Cables not included in the package contents can be purchased separately.
✎ Check that there is no accessory hidden behind packing materials when you open the box.
[ CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
x
x
x
x
x
x
User Manual
Remote Control & Batteries (AAA x 2)
Warranty Card / Safety Guide (Not available in some locations)
x
Stand Connector
x
Stand Base
x
Audio Cable
x
Quick Setup Guide
Cleaning Cloth
Power Cord
D-Sub Cable
x
Stereo Cable
Component Cable
x
HDMI Cable
Input Cables (Sold Separately)
x
HDMI to DVI Cable
x
English
11
Getting Started
Viewing the Control Panel
✎ The product colour and shape may vary depending on the model.
Control Panel
SOURCE
E
Toggles between all the available input sources. In the on-screen menu, use this button as
you would use the ENTERE button on the remote control.
MENU
Displays an on-screen menu, the OSD (on screen display) of your LED display's features.
Y
z
Adjusts the volume. In the OSD, use the Y buttons as you would use the l and r
buttons on the remote control.
Changes the channels. In the OSD, use the z buttons as you would use the u
and d buttons on the remote control.
P (Power)
Turns the LED display on or off.
Power Indicator
Blinks and turns off when the power is on and lights up in standby mode.
Remote control sensor
Aim the remote control towards this spot on the LED display.
Standby mode
Do not leave your LED display in standby mode for long periods of time (when you are away on a holiday, for example). A small
amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
English
12
Getting Started
Viewing the Remote Control
✎ This is a special remote control for the visually impaired and has Braille points on the Channel and Number buttons.
Turns the TV on and off.
Displays and selects the available video
sources.
Have direct access to channels.
Alternately select Teletext ON, Double,
Mix or OFF.
Adjusts the volume.
Displays the main on-screen menu.
Displays the Contents Home, which
includes Channel List, Guide, Media
Play, Schedule Manager, and Source.
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays channel lists on the screen.
Displays the EPG (Electronic Programme
Guide).
Quickly select frequently used functions.
Displays information on the TV screen.
Move the cursor and select an item.
Conirm the setting.
Returns to the previous menu.
Exits the menu.
Use these buttons according to the
direction on screen.
PIP: Turns the PIP on or off.
P.SIZE: Selects the Picture Size.
AD/SUBT.: Turns the audio description
on and off (not available in some
locations). / Displays digital subtitles.
Using these buttons in Media Play
mode.
Installing batteries (Battery size: AAA)
English
13
Connections
Connecting to an Antenna
When the LED display is initially powered on, basic settings proceed automatically.
✎ Preset: Connecting the mains and antenna.
ANT OUT
Power Input
Setup (Initial Setup)
When the LED display is initially powered on, a sequence of on-screen prompts will assist in coniguring basic settings. Press the
POWERP button. Setup is available only when the Input Source is set to TV.
✎ Before turning on the LED display, make sure the antenna cable is connected.
1
2
Selecting a menu
language
Selecting Store Demo
or Home Use
3
4
Selecting an area
Auto Tuning
Press the u or d button to select a menu language. Press ENTERE button
twice when done.
Press the u or d button, then press the ENTERE button.
x Select the Home Use mode. Store Demo Mode is for retail environments.
x To return the unit’s settings from Store Demo to Home Use (standard):
Press the volume button on the LED display. When you see the volume
OSD, press and hold MENU for 5 sec.
x Store Demo is only for shop display. If you select it, several functions are
not able to use. Please select Home Use when you watch at home.
Press the ENTERE button. Select the appropriate area by pressing the u or d button.
Press the ENTERE button to conirm your choice.
Press the u or d button to select correct option, and then press ENTERE button twice. Let’s
ind and store channels on your TV. Do you need to search for channels?
x Yes, I need to. All the channels available will be found and stored on your TV. (Auto Tuning
necessary)
x No, I don’t need to. My set-top box provides all the channels that are available, so I don't
need to search for channels.
You can complete Setup by selecting it.
P
✎
x
Air / Cable: Select the antenna source to memorise.
Digital & Analogue / Digital / Analogue: Select the channel source to memorise.
You can check more details on page22.
Setting the Clock Mode Set the Clock Mode automatically or manually.
x Auto: Select the time zone (depending on the country) where you are located.
x Manual: Allows you to manually set the current date and time.
If the customer chooses "No, I don t need to." in step 4, the clock just
can be set manually.
Complete
Press the ENTERE button.
✎
5
✎
6
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change the
PIN number, use the Change PIN function.
You should do Setup (MENU System) again at home although you did in shop.
✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN
to “0-0-0-0”: POWER (off)
MUTE
8
2
4
POWER (on).
English
14
Connections
Connecting to an AV Device
Using an HDMI or an HDMI to DVI cable (up to 1080p)
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, VCR
HDMI OUT
DVD /
Blu-ray player
DVI OUT
DVD /
Blu-ray player
R
AUDIO OUT
W
✎ HDMI IN(DVI) / PC/DVI AUDIO IN
x
x
If an HDMI to DVI cable is connected to the HDMI IN(DVI) port, the audio does not work.
x
x
Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of
HDMI mode is connected to the LED display. If such a problem occurs, ask the manufacturer of the external device about
the HDMI version and, if out of date, request an upgrade.
A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet
function via HDMI.
Using a Scart Cable
Available devices: DVD, VCR
VCR / DVD
EXT
EXT (RGB)
✎ In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
English
15
Connections
Using a Component (up to 1080p) or Audio/Video (480i only) Cable
Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Audio Cable
(Not Supplied)
Video Cable
(Not Supplied)
Y
PB
W
R
Y
PR
W
W
R
AUDIO OUT
VIDEO OUT
COMPONENT
/ AV IN
R-AUDIO-L
Device
R
W
R
R
B
G
Audio Cable
(Not Supplied)
Component Cable
(Not Supplied)
R
R
Red
W
White
R
Red
W
B
G
AUDIO OUT
Bule
Green
R-AUDIO-L
R
R
B
G
COMPONENT OUT
PR
PB
Device
Y
R
Red
W
White
Y
Yellow
✎ When connecting to AV IN, the colour of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow).
✎ For better picture quality, the Component connection is recommended over the A/V connection.
Connecting to a COMMON INTERFACE slot
(Just for Europe, Turkey,Algeria,South Africa, and CIS area)
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
x If you don’t insert the “CI or CI+ CARD,” some channels will display the message
“Scrambled Signal”.
x The pairing information containing a telephone number, the “CI or CI+ CARD” ID
the Host ID and other information will be displayed in about 2~3 minutes. If an error
message is displayed, please contact your service provider.
x When the coniguration of channel information has inished, the message “Updating
Completed” is displayed, indicating the channel list is updated.
✎ NOTE
x
x
You must obtain a “CI or CI+ CARD” from a local cable service provider.
x
x
x
x
x
Insert the “CI or CI+ CARD” in the direction marked on the card.
When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause
damage to it.
The location of the COMMON INTERFACE slot may be different depending on the model.
“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
If you have any problems, please contact a service provider.
Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.
English
16
Connections
Connecting to a Audio device and PC
Using an HDMI cable or an HDMI to DVI cable or a D-sub cable
✎ Connecting through the HDMI cable may not be supported depending on the PC.
HDMI Cable
(Not Supplied)
HDMI to DVI
(Not Supplied)
Stereo Cable
Stereo Cable
D-Sub Cable
English
17
Connections
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution : 1366 x 768 pixels (T19C300 model only)
Mode
IBM
VESA DMT
MAC
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
MAC
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
Display Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
720 x 400
70Hz
31.469
70.087
28.322
-/+
640 x 480
60Hz
31.469
59.940
25.175
-/-
640 x 480
67Hz
35.000
66.667
30.240
-/-
640 x 480
72Hz
37.861
72.809
31.500
-/-
640 x 480
75Hz
37.500
75.000
31.500
-/-
800 x 600
60Hz
37.879
60.317
40.000
+/+
800 x 600
72Hz
48.077
72.188
50.000
+/+
800 x 600
75Hz
46.875
75.000
49.500
+/+
832 x 624
75Hz
49.726
74.551
57.284
-/-
1024 x 768
60Hz
48.363
60.004
65.000
-/-
1024 x 768
70Hz
56.476
70.069
75.000
-/-
1024 x 768
75Hz
60.023
75.029
78.750
+/+
1280 x 720
60Hz
45.000
60.000
74.250
+/+
1366 x 768
60Hz
47.712
59.790
85.500
+/+
Horizontal
Frequency (kHz)
Vertical
Frequency(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
Optimal resolution : 1920 x 1080 pixels
Display Mode
Mode
IBM
VESA DMT
MAC
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
MAC
VESA DMT
VESA DMT
VESA DMT
VESA DMT
MAC
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
VESA DMT
Resolution
720 x 400
70Hz
31.469
70.087
28.322
-/+
640 x 480
60Hz
31.469
59.940
25.175
-/-
640 x 480
67Hz
35.000
66.667
30.240
-/-
640 x 480
72Hz
37.861
72.809
31.500
-/-
640 x 480
75Hz
37.500
75.000
31.500
-/-
800 x 600
60Hz
37.879
60.317
40.000
+/+
800 x 600
72Hz
48.077
72.188
50.000
+/+
800 x 600
75Hz
46.875
75.000
49.500
+/+
832 x 624
75Hz
49.726
74.551
57.284
-/-
1024 x 768
60Hz
48.363
60.004
65.000
-/-
1024 x 768
70Hz
56.476
70.069
75.000
-/-
1024 x 768
75Hz
60.023
75.029
78.750
+/+
1152 x 864
75Hz
67.500
75.000
108.000
+/+
1152 x 870
75Hz
68.681
75.062
100.000
-/-
1280 x 720
60Hz
45.000
60.000
74.250
+/+
1280 x 800
60Hz
49.702
59.810
83.500
-/+
1280 x 1024
60Hz
63.981
60.020
108.000
+/+
1280 x 1024
75Hz
79.976
75.025
135.000
+/+
1366 x 768
60Hz
47.712
59.790
85.500
+/+
1440 x 900
60Hz
55.935
59.887
106.500
-/+
1600 x 900RB
60Hz
60.000
60.000
108.000
+/+
1680 x 1050
60Hz
65.290
59.954
146.250
-/+
1920 x 1080
60Hz
67.500
60.000
148.500
+/+
✎ NOTE
x
x
x
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
English
18
Connections
Changing the Input Source
Edit Name
SOURCEs
Source
SOURCE s
Edit Name
ENTERE
In the Source, press the TOOLST button, and then you can
set an external input sources name you want.
Source
■
Use to select LED display or an external input
sources such as a DVD / Blu-ray player / cable
box / STB satellite receiver.
■
TOOLST
TV / Ext. / PC / HDMI/DVI / AV / USB /
Component
VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your input
source selection easier.
✎ In the Source, connected inputs will be
✎ When connecting a PC to the HDMI IN (DVI) port with
✎ TV, PC and Ext. always stay activated.
✎ When connecting a PC to the HDMI IN (DVI) port with
HDMI cable, you should set the LED display to PC mode
under Edit Name.
highlighted.
HDMI to DVI cable, you should set the LED display to DVI
PC mode under Edit Name.
✎ When connecting an AV devices to the HDMI IN (DVI) port
with HDMI to DVI cable, you should set the LED display to
DVI Devices mode under Edit Name.
Information
SOURCEs
TOOLST
Information
ENTERE
You can see detailed information about the selected external
device.
Basic Features
How to Operate the OSD (On Screen Display)
How to Navigate Menus
Before using the LED display, follow the steps below to learn
how to navigate the menu and select and adjust different
functions.
The access step may differ depending on the selected menu.
1
MENU m
3
1
2
4
1 ENTERE / Direction button: Move the cursor and select
an item. Conirm the setting.
2 RETURN button: Returns to the previous menu.
2
3
4
5
6
7
/
ENTER E
/
/
ENTER E
EXIT e
The main menu options appear on
the screen:
Picture, Sound, Channel, System,
Support.
Select an icon with the or
button.
Press ENTERE to access the
sub-menu.
Select the desired submenu with the
or button.
Adjust the value of an item with the
or button. The adjustment in
the OSD may differ depending on the
selected menu.
Press ENTERE to complete the
coniguration.
Press EXIT.
3 MENU button: Displays the main on-screen menu.
4 EXIT button: Exits the on-screen menu.
English
19
Basic Features
x
x
x
✎
x
x
x
Aerial: Select the desired antenna source.
Channel: Select the desired channel.
Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or
Everyday to set at your convenience. If you select Manual,
you can set the day you want.
The c mark indicates the date is selected.
Date: you can set desired date.
It is available when you select Once in Repeat.
x
✎
Start Time: You can set start time you want.
On the Information screen, you can change or
cancel a reserved information.
Cancel Schedule: Cancel a show you have
reserved to watch.
x
x
Edit: Change a show you have reserved to watch.
x
Return: Return to the previous screen.
Channel List
You can view all the channel searched.
All
2
24ore.tv
3
BBC World
4
Class News
5
Coming Soon
6
R4 DTT
C2
a2
C4
T Tools L Ch. Mode E Watch k Page
The displayed image may differ depending on the model.
✎ When you press the CH LIST button on the remote
control, Channel List screen will be displayed at once.
Using the operation buttons with the Channel List.
■
T (Tools): Press Tools button to check the following
functions.
x
Programme View:Press the u/d buttons to select the
desired programme, then press the ENTERE button.
(Only for DIGITAL Channel)
x
Edit Favourites: Set channels you watch frequently as
favourites.
✎
Select the Edit Favourites, then press the
ENTERE button.
– If the channel is already added to favourite
channel, Edit Favourites will be shown.
Edit Channel Name (Only for Analogue channels):
Assign your own channel name.
This function may not support depending on the
region.
Edit Channel Number: Edit the number by pressing the
number buttons desired.
This function may not support depending on the
region.
x
Information: Display the channel name, resolution,
picture mode, language and so on.(Some just available
for DTV)
x
Sort: Change the list ordered by channel name or
channel number. (Only for DIGITAL Channel)
x
x
Change antenna: Switches to Air or Cable.
Edit Mode: You can select desired channels and edit it.
■
l r (Ch. Mode): Move to the type of channels you want to
display on the Channel List screen.
■
E (Watch / Information): Watches the channel you
select. / Displays details of the selected programme.
■
k (Page): Move to next or previous page.
✎
IL MEDICO E LO STREGONE
a1
The PIN input screen appears. Enter your 4-digit
PIN, the default of which is “0-0-0-0”. Change the
PIN using the Change PIN option.
Delete: You can delete a channel to display the
channels you want.
Channel List
1futech
✎
x
ENTERE
1
This function is available only when the Channel
Lock is set to On.
✎
Channel List
CONTENT
✎
✎
✎
x
Lock / Unlock: Lock a channel so that the channel
cannot be selected and viewed.
The option may differ depending on country.
How to use Schedule Viewing in Channel List (Depending
on the channels)
When you set the Schedule Viewing in Channel List, you can
only set the programme in Programme View.
1. Press the CH LIST button, then select a desired digital
channel.
2.
Press the TOOLST button and select Programme View.
3.
Press the u / d buttons to select the desired programme,
then press the E (Information) button.
4.
Select Schedule Viewing, then press the ENTERE
button when done.
✎ If you want to cancel Schedule Viewing, follow steps 1
through 3. Select Cancel Schedule.
English
21
Basic Features
Channel Menu
■
(depending on the country)
Sets additional search options such as the frequency and
symbol rate for a cable network search.
– Start Frequency / Stop Frequency: Set the start or
stop frequency (differs in each country).
– Symbol Rate: Displays available symbol rates.
– Modulation: Displays available modulation values.
¦ Retuning Channels
MENUm
Channel
Cable Search Option
ENTERE
Aerial (Air / Cable)t
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the LED display.
Manual Tuning
Country
✎ If a channel is locked using the Channel Lock function,
(depending on the country)
The PIN input screen appears. Enter your 4 digit PIN number.
■
Scans for a channel manually and stores in the LED display.
the PIN input window appears.
Digital Channel Tuning: Scans for a digital channel.
1.
✎ Select your country so that the LED display can correctly
auto-tune the broadcasting channels.
■
Digital Channel: Change the country for digital channels.
■
Analogue Channel: Change the country for analogue
channels.
Auto Tuning
Press the ENTERE button to select New.
✎
When selecting Aerial Air: Channel,
Frequency, Bandwidth
✎
2.
■
When selecting Aerial Cable: Frequency,
Modulation, Symbol Rate
Press the d button to select Search. When scanning
has innished, a channel is updated in the channel list.
Analogue Channel Tuning: Scans for a analogue channel.
(depending on the country)
1.
Press the ENTERE button to select New.
✎ Automatically allocated programme numbers may not
2.
Set the Programme, Colour System, Sound System,
Channel and Search.
3.
Press the d button to select Store. When scanning
has innished, a channel is updated in the channel list.
correspond to actual or desired programme numbers. If
a channel is locked using the Channel Lock function, the
PIN input window appears.
■
Auto Tuning
– Air / Cable: Select the antenna source to memorise.
Digital & Analogue / Digital / Analogue: Select the
channel source to memorise.
✎
When selecting Cable Digital & Analogue
or Digital: Provide a value to scan for cable
channels.
x Search Mode(Full / Network / Quick): Selects
the Search Mode settings among Full /
Network / Quick.
Transfer Channel List
The PIN input screen appears. Enter your 4 digit PIN number.
Imports or exports the channel map. You should connect a USB
storage to use this function.
■
Import from USB: Import channel list from USB.
■
Export to USB: Export channel list to USB. This function is
available when USB is connected.
✎ USB format should be FAT32.
x
Network (Auto / Manual): Selects the Network
ID setting mode among Auto or Manual.
x
Network ID: When Network is Manual, you
can set up Network ID using the numeric
buttons.
x
Frequency: Displays the frequency for the
channel. (differs in each country)
x
Modulation: Displays available modulation
values.
✎ Settings are applied to the channel you’re currently
x
Symbol Rate: Displays available symbol rates.
✎ Fine tuned channels that have been saved are marked
Fine Tune
(analogue channels only)
If the reception is clear, you do not have to ine tune the channel,
as this is done automatically during the search and store
operation. If the signal is weak or distorted, ine tune the channel
manually. Scroll to the left or right until the image is clear.
watching.
with an asterisk “*” on the right-hand side of the channel
number in the channel banner
✎ To reset the fine-tuning, select Reset.
English
22
Basic Features
Picture Menu
Screen Adjustment
¦ Changing the Preset Picture Mode
MENUm
Picture
Picture Mode
■
ENTERE
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magniies the picture size more than 4:3.
Adjusts the Position by using u / d buttons.
Picture Mode t
Select your preferred picture type.
✎ When connecting a PC, the Picture Mode is only available
✎
the Standard and Entertain.
■
Dynamic: Suitable for a bright room.
■
Standard: Suitable for a normal environment.
■
Movie: Suitable for watching movies in a dark room.
■
Zoom: Magniies the 16:9 wide pictures vertically to it the
screen size.
Adjusts the Zoom or Position by using u / d
button.
✎
Entertain: Suitable for watching movies and games.
✎
4:3: Sets the picture to basic (4:3) mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and centre of
the screen may cause image retention (screen burn)
which are not covered by the warranty.
✎
It is only available when connecting a PC.
¦ Adjusting Picture Settings
MENUm
Picture
Adjust screen viewing Angle to optimize screen quality according
to your viewing position.
■
■
Screen Fit: Displays the full image without any cut-off when
HDMI (720p / 1080i / 1080p) or Component (720p / 1080i /
1080p) signals are inputted.
Adjusts the Position by using u / d / l / r button.
ENTERE
Samsung MagicAngle
Picture Size: Your cable box / satellite
receiver may have its own set of screen
sizes as well. However, we highly
recommend you use 16:9 mode most of
the time.
✎
✎ NOTE
Samsung MagicAngle: When viewing the screen at an
angle from below or above by setting the appropriate mode
for each position you can obtain a similar picture quality as
viewing the screen directly from the front.
x
Depending on the input source, the picture size options
may vary.
x
The available items may differ depending on the
selected mode.
x
When connecting a PC, only 16:9 and 4:3 modes can
be adjusted.
x
x
Off: Select when viewing from the front position.
Lean back mode: Select when viewing from a slightly
lower position.
x
x
Settings can be adjusted and stored for each external
device connected to an input on the LED display.
Standing Mode: Select when viewing from the upper
position.
x
If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and right
as in the overscan function.
Mode: Adjust screen viewing angle.
✎ When Samsung MagicAngle is set to Lean back mode
■
or Standing Mode, Gamma is not available.
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality
control.
✎ NOTE
x
In analogue TV, PC, AV modes of the PAL system, the
Tint (G/R) function is not available.
x
When connecting a PC, you can only make changes to
Backlight, Contrast, Brightness and Sharpness.
x
Settings can be adjusted and stored for each external
device connected to the LED display.
x
Lowering picture brightness reduces power
consumption.
■
Zoom / Position:You can adjust picture size and position
by u / d / l / r button.
✎
It's only available when picture size is set as Zoom
and Wide Zoom.
✎
In Wide Zoom mode, you can only use Position
adjustment.
✎
Reset: Reset the Zoom and Position to the default
settings.
4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3):
Available only when picture size is set to Auto Wide.
You can determine the desired picture size at the 4:3
WSS (Wide Screen Service) size or the original size. Each
European country requires different picture size.
✎
Not available in HDMI , Component, and HDMI/DVI
mode.
English
23
Basic Features
■
PC Screen Adjustment
✎
Available only PC mode.
x
Coarse / Fine: Removes or reduces picture noise.
If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible
(Coarse) and Finetune again. After the noise has
been reduced, readjust the picture so that it is
aligned to the centre of screen.
x
Position: Adjusts the PC screen position with
direction button (u / d / l / r).
x
Image Reset: Resets the image to default settings.
x
x
x
Keep your elbow at a right angle and keep your arm level
with the back of your hand.
Keep your elbow at a right angle.
Place your heels lat on the ground while keeping your
knees at an angle of 90 degrees or higher and maintain the
position of your arm so that your arm is below your heart.
¦ Changing the Picture Options
Advanced Settings
MENUm
Auto Adjustmentt
Picture
Advanced Settings
ENTERE
Frequency values / position and ine tune are adjusted
automatically.
(Advanced Settings are available in Standard / Movie mode)
Compared to previous models, new Samsung LED display have
a more precise picture.
✎ It's only available in PC mode.
✎ When connecting a PC, you can only make changes to
White Balance.
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card, the
actual screens on your PC may differ in which case the same
basic set-up information will almost always be applied. (If not,
contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
2.
Advanced Settings
Dynamic Contrast
Black Tone
Flesh Tone
RGB Only Mode
Colour Space
Click on “Appearance and Themes” in the “Control Panel”
window and a display dialog-box will appear.
3.
Click on “Display” and a display dialog box will appear.
4.
Navigate to the “Settings” tab on the display dialog-box.
High
Off
0
Off
Native
White Balance
Gamma
0
x
The correct size setting (resolution) [Optimum: 1920 x
1080 pixels]. (T19C300: 1366 x 768 pixels)
■
Dynamic Contrast (Off / Low / Medium / High): Adjust
the screen contrast.
x
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
■
Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■
Flesh Tone: Emphasize pink “Flesh Tone.”
■
RGB Only Mode (Off / Red / Green / Blue): Displays the
Red, Green and Blue colour for making ine adjustments to
the hue and saturation.
■
Colour Space (Auto / Native): Adjust the range of colours
available to create the image.
■
White Balance: Adjust the colour temperature for a more
natural picture.
Maintaining the Correct Posture when Using this Product
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red,
green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red,
green, blue) brightness.
Reset: Resets the White Balance to it’s default settings.
Maintain the correct posture when using this product.
x Straighten your back.
x Keep a distance of 45~50 cm (15~19 inches) from your
eyes to the screen. Look down at the screen and face the
screen forwards.
x Adjust the angle of the product so that light is not relected
onto the screen.
■
Gamma: Adjust the primary colour intensity.
■
Motion Lighting (Off / On): Reduce power consumption by
brightness control.
English
24
Basic Features
¦ Sound Systems, Etc.
MENUm
Sound
■
ENTERE
Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a voice
signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Broadcast Audio Options
■
Audio Language
(digital channels only)
Change the default value for audio languages.
The available language may differ depending on the
broadcast.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
✎
■
Audio Format
(digital channels only)
Select the audio format.
■
Audio Description
(not available in all locations) (digital
channels only)
This function handles the Audio Stream
for the AD (Audio Description) which is
sent along with the Main audio from the
broadcaster.
Audio Description (Off / On): Turn
the audio description function on
or off.
Speaker Settings
■
Speaker Select (External Speaker / TV Speaker):A sound
echo may occur due to a difference indecoding speed
between the main speaker and theaudio receiver. In this
case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker,
the volume and MUTE buttons will not operate and
the sound settings will be limited.
✎
When Speaker Select is set to External Speaker.
✎
✎
When Speaker Select is set to TV Speaker.
✎
✎
✎
If there is no video signal, both speakers will be mute.
Volume: Adjust the audio description volume.
Additional Settings
(digital channels only)
■
Select Line to obtain dynamic sound, and RF to
reduce the difference between loud and soft sounds
at night time.
■
x
x
TV Speaker: Off, External Speaker: On
TV Speaker: On, External Speaker: On
It's not available for TC300 series.
Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience
compared to Normal mode, making almost no noise. It is
useful at night.
DTV Audio Level (MPEG / HE-AAC): This function allows
you to reduce the disparity of a voice signal (which is one
of the signals received during a digital TV broadcast) to a
desired level.
Reset Sound (Yes / No)
✎
According to the type of broadcast signal, MPEG /
HE-AAC can be adjusted between -10dB and 0dB.
Reset all sound settings to the factory defaults.
✎
To increase or decrease the volume, adjust between
the range 0 and -10 respectively.
¦ Selecting the Sound Mode t
When you set to Dual fg, the current sound mode is displayed
on the screen.
A2
Stereo
NICAM
Stereo
Audio
Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual f-g
Default
Mono
Stereo Mono
Dual f Dual g
Mono
Mono Stereo
Mono Dual f
 Dual g 
Automatic
change
Dual f
Automatic
change
Dual f
✎ If the Stereo signal is weak and an automatic switching,
occurs, then switch to the Mono.
✎ Only activated in stereo sound signal.
✎ Only available when the input Source is set to TV.
English
26
Basic Features
Digital Text (Disable / Enable)
1. Purchase a CI CAM module at your nearest dealer or by
phone.
(UK only)
If the programme broadcasts with digital text, this feature is
enabled.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the
direction of the arrow.
Auto Protection Time
■
Off / 2 hours / 4 hours / 8 hours / 10 hours: If the
screen remains idle with a still image for a certain period
of time deined by the user, the screen saver is activated
to prevent the formation of ghost images on the screen.
General
■
■
Max. Power Saving (Off / On): Turn off PC monitor
when PC is not used for certain length of time to reduce
power consumption.
Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
a more realistic gaming experience by selecting game
mode.
✎ NOTE
y Precautions and limitations for game mode
– To disconnect the game console and connect another
external device, set Game Mode to Off in the setup
menu.
– If you display the LED display menu in Game Mode,
the screen shakes slightly.
y Game Mode is not available when the input source is
set to TV or PC.
y After connecting the game console, set Game Mode
to On. Unfortunately, you may notice reduced picture
quality.
y If Game Mode is On:
– Picture mode is set to Standard and Sound mode is
set to Movie.
■
■
3. Insert the CAM with the “CI or CI+ CARD” into the
common interface slot, in the direction of the arrow so
that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal
channel.
¦ Picture In Picture (PIP)
MENUm
System
PIP
ENTERE
PIP t
You can watch the LED display tuner and one external video
source simultaneously. PIP (Picture-in-Picture) does not
function in the same mode.
✎ NOTE
y For PIP sound, refer to the Sound Select instructions.
y If you turn the LED display off while watching in PIP
mode, the PIP window will disappear.
y You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
y screen to view a game or karaoke.
y While Program Rating Lock is in operation, the PIP
function cannot be used.
y PIP settings
Main picture
Sub picture
HDMI, HDMI(PC),
Component, PC
TV
■
PIP (Off / On): Activate or deactivate the PIP function.
■
Channel: Select the channel for the sub-screen.
Panel Lock (Off / On): Lock or unlock all the keys on
the front panel at once. When Panel Lock is on, none of
the keys on the front panel operate.
■
Size (Õ / Ã): Select a size for the sub-picture.
■
Position (à / – / — / œ): Select a position for the
sub-picture.
Boot Logo (Off / On): Display Samsung logo when the
LED display is turned on.
■
Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
Common Interface
■
CI Menu: This enables the user to select from the
CAMprovided menu. Select the CI Menu based on the
menu PC Card.
■
CAM video transcoding: Switch CAM video
transcoding auto or off.
■
Application Info: View information on the CAM inserted
into the CI slot and on the “CI or CI+ CARD” which is
inserted into the CAM. You can install the CAM anytime
whether the LED display is on or off.
¦ DivX® Video On Demand
Shows the registration code authorized for the TV. If you
connect to the DivX web site and register, you can download
the VOD registration ile. If you play the VOD registration
using Media contents, the registration is completed.
✎ For more information on DivX® VOD, visit “http://vod.
divx.com”.
English
29
Basic Features
Support Menu
MENUm
Support
ENTERE
Installing the Latest Version
■
By USB: Insert
TV Side
a USB drive
containing
the irmware
USB Drive
upgrade ile,
downloaded from
“www.samsung.com,” into the TV. Please be careful not
to disconnect the power or remove the USB drive until
upgrades are complete. The TV will be turned off and on
automatically after completing the irmware upgrade. When
software is upgraded, video and audio settings you have
made will return to their default settings. We advise you to
write down your settings so that you can easily reset them
after the upgrade.
■
By Channel: Upgrade the software using the broadcasting
signal.
Self Diagnosis
✎ Self Diagnosis might take few seconds, this is part of the
normal operation of the LED display
■
Picture Test (Yes / No): Use to check for picture problems.
Yes: If the test pattern does not appear or there is noise
in the test pattern, select Yes. There may be a problem
with the LED display. Contact Samsung’s Call Centre for
assistance.
No: If the test pattern is properly displayed, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
■
Sound Test (Yes / No): Use the built-in melody sound to
check for sound problems.
Yes: If you can hear sound only from one speaker or not
at all during the sound test, select Yes. There may be a
problem with the LED display. Contact Samsung’s Call
Centre for assistance.
No: If you can hear sound from the speakers, select No.
There may be a problem with your external equipment.
Please check your connections. If the problem persists,
refer to the external device’s user manual.
■
Signal Information: (digital channels only) An HD channel’s
reception quality is either perfect or the channels are
unavailable. Adjust your antenna to increase signal strength.
■
Reset: Restores all settings to factory defaults except
network settings.
Software Upgrade
Software Upgrade can be performed via a broadcasting signal
or downloading the latest irmware from “www.samsung.com,”
to a USB memory device.
Current Version the software already installed in the LED
display.
✎ Software is represented as “Year/Month/Day_Version”.
✎
If the function is selected during the software
transmission period, software will be automatically
searched and downloaded.
✎
The time required to download the software is
determined by the signal status.
■
Alternative Software: Replace the current software with
the alternative.
■
Standby Mode Upgrade (Off / 1 hour later / 2 hours later
/ 00:00 / 02:00 / 12:00 / 14:00): A manual upgrade will be
automatically performed at selected time. Since the power
of the unit is turned on internally, the screen may be turned
on slightly for the LED product. This phenomenon may
continue for more than 1 hour until the software upgrade is
complete.
Contact Samsung
View this information when your LED display does not work
properly or when you want to upgrade the software. You can
ind information regarding our call centres, and how to download
products and software.
Contents Home
You can enjoy useful and various contents.
Software Upgrade
By USB
By Channel
Alternative Software
Standby Mode Upgrade
2 hours later
English
30
Advanced Features
Supported Video Formats
File
Extension
Container
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
Comments
Audio Codec
DivX 3.11 / 4.x
/ 5.1 / 6.0
GMC Not Support
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.m2ts
*.mts
*.divx
MPEG4 SP /
ASP
H.264 BP / MP 1920 x 1080
/ HP
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
20 [40]
AC3
LPCM
ADMPCM(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG(MP3)
VC1 SP / MP / A P L3 Support,
DTS Core
L4 Not Support
Vorbis
Simple Proile Medium Level
Main Proile High Level
Advanced Proile Level 3
WMV9 support
Proile3, restricted up to SD
resolution
H.263
30
Motion JPEG
Not Include FMO / ASO / RS
Support BP / MP / HP Level 4.1
640 x 480
10
1920 x 1080
20 [40]
Window Media
Video v9
MPEG2
Hight Proile High Level
MPEG1
MPEG-1 except D-picture
English
34
Advanced Features
¦ Media Play - Additional Functions
Videos/Photos/Music Play Option menu
Press the TOOLST button and you can make the following operations.
Category
Operations
Videos
Photos
Music
>
Shuffle Mode
You can play the music randomly.
Repeat Mode
You can play media iles repeatedly.
>
Picture Mode
You can adjust the picture setting.
>
>
Sound Mode
You can adjust the sound setting.
>
>
Start Slide Show
/ STOP Slide Show
You can start or pause a Slide Show.
>
>
>
Slide Show Speed
You can select the slide show speed during the slide show.
>
Background Music On
You can on/off background music when watching a Slide Show.
>
Background Music Setting
You can select background music when watching a Slide Show.
>
Zoom
You can zoom into images in full screen mode.
>
Rotate
You can rotate images in full screen mode.
Information
You can see detailed information about the played ile.
>
>
>
Play Selection
You can play the items what you selected.
>
>
>
Title Search
You can move directly to another Title.
>
Time Search
You can search the movie using l and r buttons at intervals of
1 minute.
>
Picture Size
You can adjust the picture size to your preference.
>
Subtitle
You can set the subtitle On / Off.
>
Subtitle Settings
Play a video ile with captions displayed. This option is available only
when the caption ile name matches the video ile name.
>
Audio language
View a video in a supported language of your choice. The option is
available only when a stream-type ile that supports multiple audio
formats is played.
>
>
English
37
Other Information
Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
✎ You can change Teletext pages by pressing the numeric buttons on the remote control.
1 / (Teletext on/mix/off):
Activates the Teletext mode for the
current channel. Press the button
twice to overlap the Teletext mode
with the current broadcasting
screen. Press it one more time to
exit teletext.
2 8 (store): Stores the Teletext
pages.
3 6 (index): Displays the index
(contents) page at any time while
you are viewing Teletext.
4 4 (size): Displays the teletext
on the upper half of the screen in
double-size. To move the text to
the lower half of the screen, press
it again. For normal display, press it
once again.
5 9 (hold): Holds the display at the
current page, in the case that there
are several secondary pages that
follow automaticially. To undo, press
it again.
6 Colour buttons (red, green, yellow,
blue): If the FASTEXT system is
used by the broadcasting company,
the different topics on a Teletext
page are colour-coded and can
be selected by pressing the
coloured buttons. Press the colour
corresponding to the topic of your
choice. A new colour-coded page
is displayed. Items can be selected
in the same way. To display the
previous or next page, press the
corresponding coloured button.
7 0 (mode): Selects the Teletext
mode (LIST/ FLOF).
If pressed during LIST mode,
switches the mode to List save
mode. In List save mode, you can
save a Teletext page into a list using
the 8(store) button.
1
8 1 (sub-page): Displays the
available sub-page.
9 2 (page up): Displays the next
7
Teletext page.
0 3 (page down): Displays the
previous Teletext page.
5
(reveal): Displays the hidden
!
text (answers to quiz games, for
example). To display the normal
screen, press it again.
@ 7 (cancel): Shrinks the Teletext
display to overlap with the current
8
broadcast.
Typical Teletext page
9
2
0
3
4
5
6
!
@
Part
A
Contents
Selected page number.
B
Broadcasting channel
identity.
Current page number
or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
C
D
E
F
English
38
Other Information
Attaching a Wall Mount/Desktop Stand
Preparing before installing Wall-Mount/Desktop Stand
1.
Turn the product off and unplug the power cord from the wall outlet.
2.
Place a soft cloth or cushion on a lat surface to protect the panel and place the product face down.
3.
Hold the main body of the product with your hand. Pull the stand in the direction of the arrow as shown in the igure to separate
it.
Attaching a Wall Mount/Desktop Stand
1
2
A
3
4
A
Wall/Desktop Stand Mount
B
Wall mount kit/desktop stand (not supplied)
[ Caution
Important
4.
5.
For the installation of Wall-mount, please don’t use screws longer than 14mm(L14) of longitude.
Align wall mount/desktop stand to the Monitor/LED display and irmly ix the wall mount/desktop stand by fastening the screw.
Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall
mount stand or another stand) and irmly ix the stand by fastening the screw.
English
39
Other Information
✎ NOTE
x
x
If you use screws that are longer than the standard specifications, the inside of the product may be damaged.
x
Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive
force. This may result in damage to the product or injury due to the product falling. Samsung shall not be held liable for any
damage or injury.
x
Samsung shall not be held liable for any damage to the product or injury caused by using a wall mount/desktop stand that is
not compatible with the specifications or due to an installation not performed by an authorized installation engineer.
x
When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93 inches) of space
from the wall.
x
Use the wall mount according to the international specifications.
For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending
on the corresponding specifications.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically ix the
system when using it in a public place. The appearance and locking method may differ
from the illustration depending on the manufacturer. Refer to the manual provided with the
Kensington Lock for additional information on proper use.
<TV Rear>
1
✎ Please find a “K” icon on the rear of the LED display. A kensington slot is beside
the “K” icon.
To lock the product, follow these steps:
1.
Wrap the Kensington lock cable around a large, stationary object such as desk or
chair.
2.
Slide the end of the cable with the lock attached through the looped end of the
Kensington lock cable.
3.
Insert the locking device into the Kensington slot on the product (1).
4.
Lock the lock.
<Optional>
✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎ The locking device has to be purchased separately.
✎ The location of the Kensington slot may be different depending on the LED display model.
English
40
Other Information
Troubleshooting
If you have any questions about the LED display, irst refer to this list. If none of these troubleshooting tips apply, please visit “www.
samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Issues
Solutions and Explanations
Picture Quality
First of all, please perform the Picture Test and conirm that your LED display is properly displaying test
image. (go to MENU - Support - Self Diagnosis - Picture Test) If the test image is properly displayed, the
poor picture may caused by the source or signal.
The LED display image does not look as
good as it did in the store.
If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI to deliver HD
(high deinition) picture quality.
Cable/Satellite subscribers: Try HD stations from the channel line up.
Antenna connection: Try HD stations after performing Auto tuning.
✎ Many HD channels are up scaled from SD(Standard Deinition) contents.
Adjust the Cable/Set top box video output resolution to 1080i or 720p.
Make sure you are watching the LED display at the minimum recommended distance based on the
size and deinition of the signal.
The picture is distorted: macroblock error,
small block, dots, pixelization
Compression of video contents may cause picture distortion especially in fast moving pictures such
as sports and action movies.
Low signal level or bad quality can cause picture distortion. This is not a LED display issue.
Mobile phones used close to the LED display (cca up to 1m) may cause noise in picture on analogue
and digital LED display.
There is poor colour or brightness.
Adjust the Picture options in the LED display menu. (go to Picture Mode / Colour / Brightness /
Sharpness)
Adjust Energy Saving option in the LED display menu. (go to MENU - System - Eco Solution Energy Saving)
Try resetting the picture to view the default picture settings. (go to MENU - Picture - Reset Picture)
There is a dotted line on the edge of the
screen.
If the picture size is set to Screen Fit, change it to 16:9.
Change cable/satellite box resolution.
When changing channels, the picture
freezes or is distorted or delayed.
If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until
the cable box reboots. It may take up to 20 minutes.
Set the output resolution of the cable box to 1080i or 720p.
Sound Quality
First of all, please perform the Sound Test to conirm that your LED display audio is properly operating. (go
to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low
at maximum volume.
Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your LED
display.
The picture is good but there is no sound.
If you are using a DVI to HDMI cable, LED display set does not support audio.
Reboot the connected device by reconnecting the device’s power cable.
If your LED display has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
noise.
For antenna or cable connections, check the signal strength. Low signal level may cause sound
distortion.
No Picture, No Video
The LED display will not turn on.
Make sure the AC power cord is securely plugged in to the wall outlet and the LED display.
Make sure the wall outlet is working.
Try pressing the POWER button on the LED display to make sure the problem is not the remote. If the
LED display turns on, refer to “The remote control does not work” below.
The LED display turns off automatically.
Ensure the Sleep Timer is set to Off in the Time menu.
If your PC is connected to the LED display, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the LED display.
When watching LED display from an antenna or cable connection, the LED display will turn off after
10 ~ 15 minutes if there is no signal.
English
41
Other Information
Issues
There is no picture/video.
Solutions and Explanations
Check cable connections (remove and reconnect all cables connected to the LED display and
external devices).
Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the
connections to the LED display input. For example, if an external device’s output is HDMI, it should be
connected to an HDMI input on the LED display.
Make sure your connected devices are powered on.
Be sure to select the LED display correct source by pressing the SOURCE button on the LED display
remote.
Reboot the connected device by reconnecting the device’s power cable.
RF(Cable/Antenna) Connection
The LED display is not receiving all
channels.
Make sure the Antenna cable is connected securely.
Please try Setup (Initial setup) to add available channels to the channel list. Go to MENU - System Setup (Initial setup) and wait for all available channels to be stored.
Verify the Antenna is positioned correctly.
The picture is distorted: macro block error
small block, dots, pixelization.
Compression of video contents may cause picture distortion, especially on fast moving pictures such
as sports and action movies.
A low signal can cause picture distortion. This is not a LED display issue.
Others
The picture will not display in full screen.
HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)
contents.
Black bars on the top and bottom will appear during movies that have aspect ratios different from
your LED display.
Adjust the picture size options on your external device or LED display to full screen.
The remote control does not work.
Replace the remote control batteries with the poles (+/–) in the right direction.
Clean the sensor’s transmission window on the remote.
Try pointing the remote directly at the LED display from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the LED display on or off, or
adjust the volume.
Programme the Cable/Set top box remote control to operate the LED display. Refer to the Cable/Set
user manual for the SAMSUNG LED display code.
A “Mode Not Supported” message
appears.
Check the supported resolution of the LED display, and adjust the external device’s output resolution
accordingly.
There is a plastic smell from the LED
display.
This smell is normal and will dissipate over time.
The LED display Signal Information is
unavailable in the Self Diagnosis Test
menu.
This function is only available with digital channels from an Antenna / RF / Coax connection.
LED display is tilted to the right or left side.
Remove the stand base from the LED display and reassemble it.
There are dificulties assembling the stand
base.
Make sure the LED display is placed on a lat surface. If you can not remove the screws from the LED
display, please use a magnetized screw driver.
The Channel menu is grey out
(unavailable).
The Channel menu is only available when the LED display source is selected.
Your settings are lost after 30 minutes or
every time the LED display is turned off.
If the LED display is in the Store Demo mode, it will reset audio and picture settings every 30
minutes. Change the settings from Store Demo mode to Home Use mode in the Setup (Initial setup)
procedure. Press the SOURCE button to select TV mode, and go to MENU System Setup
(Initial setup) ENTERE.
You have intermittent loss of audio or
video.
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables
are lexible enough for long term use. If mounting the LED display to the wall, we recommend using
cables with 90 degree connectors.
You see small particles when you look
closely at the edge of the frame of the LED
display.
This is part of the product’s design and is not a defect.
English
42
Other Information
Licence
TheaterSound HD, SRS and the
symbol are trademarks of SRS Labs, Inc.TheaterSound HD
technology is incorporated under licence from SRS Labs, Inc.
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
2.0 Channel
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other
U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks & DTS 2.0 Channel is a trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Deinition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other
countries.
DivX Certiied® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certiied® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an
oficial DivX Certiied® device that plays DivX video. Visit divx.com for more information and software tools to convert your
iles into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiied® device must be registered in order to play purchased DivX Videoon-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to
vod.divx.com for more information on how to complete your registration.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open source licence notice
In the case of using open source software, Open Source licence are available on the product menu.
Open Source Licence Notice is written only English.
WEEE
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of
waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government ofice, for
details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with
other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle
them through your local, free battery return system.
English
44
Other Information
Specifications
Environmental
considerations
Operating
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Tilt
-1°(±2°) ~ 20°(±2°)
LED display System
Analogue: B/G, D/K, L, I (Depending on your country selection)
Digital: DVB-T/DVB-C
Colour/Video System
Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, MP@L4.0, HP@L4.0
Sound System
BG, DK, L, NICAM, MPEG1, DD, DD+, HEAAC
Video: 1080 24p, 1080p, 1080i, 720p, 576p, 480p
Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits.
HDMI IN
T19C300
T22C300
T24C300
Screen Size (Diagonal)
Model Name
18.5 inches (47 cm)
21.5 inches (54 cm)
24 inches (61 cm)
Display Resolution
1366 x 768 @ 60Hz
1920 x 1080 @ 60Hz
Sound (Output)
Dimensions
(WxDxH)
Weight
5W x 2
(Without Stand)
444.7 x 48.5 x 278.2 mm
(17.5 x 1.9 x 11.0 inches)
509.7 x 47 x 318.2 mm
(20.1 x 1.9 x 12.5 inches)
569.2 x 49 x 349.4 mm
(22.4 x 1.9 x 13.8 inches)
(With Stand)
444.7 x 187 x 356.4 mm
(17.5 x 7.4 x 14.0 inches)
509.7 x 195 x 396.6 mm
(20.1 x 7.7 x 15.6 inches)
569.2 x 195 x 428 mm
(22.4 x 7.7 x 16.9 inches)
(Without Stand)
3.05 kg (6.7 Ibs)
3.7 kg (8.2 Ibs)
4.15 kg (9.1 lbs)
(With Stand)
3.3 kg (7.3 Ibs)
3.95 kg (8.7 Ibs)
4.45 kg (9.8 lbs)
✎ NOTE
Design and speciications are subject to change without prior notice.
For information about power supply, and more about power consumption, refer to the label attached to the product.
Some models may not be available for purchase depending on the region.
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
DPM(Display Power Management) Function does not work if you used in conjunction with the HDMI IN (DVI) port of
this product.
English
45
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country
Web Site
Customer Care Centre
EUROPE
AUSTRIA
0810 - SAMSUNG (7267864, € 0.07/min)
www.samsung.com
BELGIUM
02-201-24-18
www.samsung.com/be (Dutch)
www.samsung.com/be_fr (French)
BOSNIA
05 133 1999
www.samsung.com
BULGARIA
07001 33 11 , normal tariff
www.samsung.com
CROATIA
062 SAMSUNG (062 726 7864)
www.samsung.com
CZECH
800 - SAMSUNG (800-726786)
www.samsung.com
DENMARK
70 70 19 70
www.samsung.com
FINLAND
09 85635050
www.samsung.com
FRANCE
01 48 63 00 00
www.samsung.com
GERMANY
0180 5 SAMSUNG bzw.
0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus
dem Mobilfunk max. 0,42 €/Min.)
www.samsung.com
CYPRUS
8009 4000 only from landline
(+30) 210 6897691 from mobile and land line
www.samsung.com
GREECE
80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line
www.samsung.com
HUNGARY
06-80-SAMSUNG (726-7864)
www.samsung.com
ITALIA
800-SAMSUNG (726-7864)
www.samsung.com
LUXEMBURG
261 03 710
www.samsung.com
MACEDONIA
023 207 777
www.samsung.com
MONTENEGRO
020 405 888
www.samsung.com
NETHERLANDS
0900-SAMSUNG (0900-7267864) ( € 0,10/Min)
www.samsung.com
NORWAY
815 56480
www.samsung.com
POLAND
0 801-1SAMSUNG (172-678)
+48 22 607-93-33
www.samsung.com
PORTUGAL
80820-SAMSUNG (808 20 7267)
www.samsung.com
ROMANIA
08008 SAMSUNG (08008 726 7864)
TOLL FREE No.
www.samsung.com
SERBIA
0700 SAMSUNG (0700 726 7864)
www.samsung.com
SLOVAKIA
0800 - SAMSUNG (0800-726 786)
www.samsung.com/sk
SPAIN
902 - 1 - SAMSUNG (902 172 678)
www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
www.samsung.com
SWITZERLAND
0848 - SAMSUNG (7267864, CHF 0.08/min)
www.samsung.com/ch (German)
www.samsung.com/ch_fr (French)
U.K
0330 SAMSUNG (7267864)
www.samsung.com
EIRE
0818 717100
www.samsung.com
LITHUANIA
8-800-77777
www.samsung.com
LATVIA
8000-7267
www.samsung.com
ESTONIA
800-7267
Samsung Electronics Czech and Slovak, s.r.o.,Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8
www.samsung.com
CIS
RUSSIA
8-800-555-55-55
www.samsung.com
GEORGIA
0-800-555-555
www.samsung.com
ARMENIA
0-800-05-555
www.samsung.com
AZERBAIJAN
088-55-55-555
www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500(GSM: 7799)
www.samsung.com
UZBEKISTAN
8-10-800-500-55-500
www.samsung.com
KYRGYZSTAN
00-800-500-55-500
www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
www.samsung.com
Country
Web Site
Customer Care Centre
MONGOLIA
+7-800-555-55-55
www.samsung.com
UKRAINE
0-800-502-000
www.samsung.com/ua (Ukrainian)
BELARUS
810-800-500-55-500
MOLDOVA
0-800-614-40
www.samsung.com/ua_ru (Russian)
www.samsung.com
www.samsung.com
ASIA PACIFIC
AUSTRALIA
1300 362 603
www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com
CHINA
400-810-5858
www.samsung.com
HONG KONG
(852) 3698 - 4698
www.samsung.com/hk (Chinese)
www.samsung.com/hk_en (English)
INDIA
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
www.samsung.com
INDONESIA
0800-112-8888 021-5699-7777
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
MALAYSIA
1800-88-9999
www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG (726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe02-5805777
www.samsung.com
SINGAPORE
1800-SAMSUNG (726-7864)
www.samsung.com
THAILAND
1800-29-3232
02-689-3232
www.samsung.com
TAIWAN
0800-329-999
0266-026-066
www.samsung.com
VIETNAM
1 800 588 889
www.samsung.com
MIDDLE EAST
U.A.E
800-SAMSUNG (726-7864)
www.samsung.com
OMAN
800-SAMSUNG(726-7864)
www.samsung.com/ae (English)
www.samsung.com/ae_ar (Arabic)
KUWAIT
183-2255
www.samsung.com/ae (English)
www.samsung.com/ae_ar (Arabic)
BAHRAIN
8000-4726
www.samsung.com/ae (English)
www.samsung.com/ae_ar (Arabic)
EGYPT
08000-726786
www.samsung.com
JORDAN
800-22273
065777444
www.samsung.com
MOROCCO
080 100 2255
www.samsung.com
SAUDI ARABIA
9200-21230
www.samsung.com/ae (English)
www.samsung.com/ae_ar (Arabic)
TURKEY
444 77 11
www.samsung.com
AFRICA
NIGERIA
0800-726-7864
www.samsung.com
GHANA
0800-10077
www.samsung.com
0302-200077
COTE D' LVOIRE
8000 0077
www.samsung.com
SENEGAL
800-00-0077
www.samsung.com
CAMEROON
7095- 0077
www.samsung.com
KENYA
0800 724 000
www.samsung.com
UGANDA
0800 300 300
www.samsung.com
TANZANIA
0685 88 99 00
www.samsung.com
SOUTH AFRICA
0860-SAMSUNG(726-7864 )
www.samsung.com
BOTSWANA
0800-726-000
www.samsung.com
NAMIBIA
8197267864
www.samsung.com
ANGOLA
91-726-7864
www.samsung.com
ZAMBIA
211350370
www.samsung.com
© 2013 Samsung Electronics Co., Ltd. All rights reserved.
BN46-00319A-01
BN46-00319A-00