Sartorius CPA124S Operating instructions

Operating Instructions
Sartorius CP|Gemplus Series
CPA, GCA and GPA Models
Electronic Micro-, Analytical and Precision Balances and Precious Metal Scales
98648-015-70
Contents
Generating a Printout
ISO/GLP-compliant Printout/Record
51
53
Interface Port
Data Input Format
Pin Assignment Charts
Cabling Diagram
55
59
62
63
15
16
18
20
Troubleshooting Guide
64
Preparing CPA2P.. Models for
Transport
65
Configuration
Printing the Parameter Settings
Setting the Parameters
(Menu Codes)
Parameter Settings (Overview)
Setting IDs, Time, Date and
Display Brightness
25
25
Care and Maintenance
66
Instructions for Recycling
68
Application Programs
Net-total Formulation
Counting
Reference Balance/Scale for Counting
Weighing in Percent
Animal Weighing/Averaging
Toggling between Weight Units
35
36
40
40
44
47
50
Overview
Specifications
Accessories (Options)
Declarations of Conformity
EC Type-approval Certificate
Plates and Markings
69
69
81
84
87
88
Safety Precautions
3
Getting Started
5
Installation
6
Operation
Overview of Display and
Operating Elements
Basic Weighing Function
Below-Balance Weighing
Calibration and Adjustment
2
15
26
27
32
Safety Precautions
Safety Instructions
§ Please read these operating instructions
carefully before using your balance
to prevent damage to the equipment.
! If there is visible damage to the equip-
ment or power cord, disconnect the
equipment from power and lock it in
a secure place to ensure that it cannot
be used for the time being.
! Do not use this equipment in hazardous
areas/locations.
! The balance housing may be opened
only by Sartorius service technicians
who have been trained at the factory.
! Make sure you disconnect the balance
from power before connecting or
disconnecting peripheral devices to or
from the balance.
! If you operate the equipment under
ambient conditions that require higher
safety standards, you must comply with
the installation regulations applicable
in your country.
When cleaning your balance, make
sure that no liquid enters the balance
housing; use only a slightly moistened
cloth to clean the balance.
Installation
– Connect only Sartorius accessories
and options, as these are optimally
designed for use with your balance.
The operator shall be responsible
for any modifications to Sartorius
equipment and for any connection
of cables or equipment not supplied
by Sartorius and must check and,
if necessary, correct these modifications
and connections. On request, Sartorius
will be happy to provide information on
operating specifications (in accordance
with the Standards for defined immunity
to interference).
$ Do not open the balance. If the seal
is broken, this will result in forfeiture
of all claims under the manufacturer's
warranty.
$ If you have any problems with your
balance, please contact your local
Sartorius office, dealer or service center.
! Make sure the voltage rating printed
on the AC adapter is identical to your
local line voltage.
– Proceed with extreme caution when
using pre-wired RS-232 connecting
cables, as the pin assignments may
not be compatible with Sartorius
equipment. Check all pin assignments
against the cabling diagrams and disconnect any lines that do not match.
3
Equipment Supplied
The equipment supplied includes the
components listed below:
–
–
–
–
–
–
CPA2P, CPA2P-F
Balance with display and control unit
Kit of standard accessories
AC adapter
Dust cover
Filter pan and lid (model CPA2P-F only)
Spacer (model CPA2P-F only)
The kit of standard accessories contains
the following:
– Weighing pan
– Interior draft shield
– Hanger for below-balance weighing
– 1 brush
– 1 pair of forceps
– 1 piece of lint-free cloth
–
–
–
–
–
–
CPA Balances with a Readability of
< 0.1 mg; CPA…-DS, GCA Scales
Balance/scale with display and
control unit
Electronics box (model CPA225D only)
Draft shield with base plate
(not available for the CPA64-WDS)
AC adapter
Weighing pan
Shield disk
Centering plate (only for CPA…DS)
In-use dust cover
Gem tray (GCA scales only)
–
–
–
–
–
–
–
CPA Balances with a Readability of 1 mg
(except for the CPA…-DS models)
Balance with display and control unit
Draft shield with cover
AC adapter
Weighing pan
Pan support
Base plate
In-use dust cover
–
–
–
–
–
–
–
CPA-Balances with a Readability of
0.01 g/0.1 g, GPA Scales
Balance/scale with display and
control unit
AC adapter
Weighing pan
Gem tray (GPA scales only)
In-use dust cover
–
–
–
–
CPA34001S, CPA34001P, CPA16001S,
CPA12001S, CPA34000
Balance with display and control unit
AC adapter
Weighing pan
In-use dust cover
–
4
Getting Started
Storage and Shipping Conditions
– Do not expose the balance to
extreme temperatures, moisture, shocks,
blows or vibration.
Unpacking the Balance
§ After unpacking the equipment,
please check it immediately for any
external damage
$ If damage is evident, refer to the
instructions under “Safety Inspection"
in the chapter entitled “Care and
Maintenance."
$ Save the box and all parts of the
packaging for any future transport.
Disconnect all cables before packing
the balance for shipping!
–
–
–
–
Installation
Choose a location that is not subject
to the following negative influences:
Heat (heater or direct sunlight)
Drafts from open windows and doors
Extreme vibrations during weighing
Excessive moisture
Conditioning the Balance
Moisture in the air can condense on
the surfaces of a cold balance whenever
it is brought into a substantially warmer
place. If you transfer the balance to
a warmer area, make sure to condition it
for about 2 hours at room temperature,
leaving it unplugged from AC power.
Seal on Balances Verified for Use
in Legal Metrology in the EU*:
EU legislation requires that a control
seal be affixed to verified balances of
accuracy class K. The control seal
consists of a sticker with the “Sartorius"
logo. If the seal is broken, the verification becomes null and void and the
balance must be re-verified.
* Including the Signatories of the Agreement on the European Economic Area
5
Installation
Model CPA2P
§ Remove the adhesive tape from the chamber doors
§ Place the components listed below inside the
chamber in the order given:
– Interior draft shield
– Weighing pan
§
§
–
–
–
§
§
–
–
–
Model CPA2P-F
1) Weighing filters of up to 125 mm d:
Lift the chamber lid gently and turn it to the
left or right
Place the components listed below inside
the chamber in the order given:
Interior draft shield
Filter pan
Cover the sample (filter) with the lid
or
2) Weighing with the standard weighing pan
(20 mm d):
Lift the chamber lid gently and turn it to the
left or right
Place the components listed below inside
the chamber in the order given:
Interior draft shield
Spacer ring
Weighing pan
Balances with an Analytical Draft Shield
! Check the sliding lock device on the back of the
draft shield; make sure it is in the “open" position
(to the right).
§ Position the draft shield carefully on the balance
6
§ Secure the draft shield by pressing lightly on
the draft shield base and moving the sliding lock
device to the left
Triangular weighing pan shape
§ Place components inside the chamber in the
following order:
– Base plate
– Shield ring
– Pan support
– Weighing pan
– Gem tray (GCA scales only)
Round weighing pan shape
§ Place components inside the chamber in the
following order:
– Base plate
– Centering plate
– Shield ring
– Pan support
– Weighing pan
7
Connecting Model CPA26P, CPA225D (-0CE)
to the Electronics Box
– Plug the male connector on the cable into the
female connector on the electronics box
! Do not exchange the balance or electronics box with
a component of a different balance!
1
2
Balances with a 3-Sided Draft Shield
§ Place draft shield on the balance with the cover
opening in front on the right
§ Turn the draft shield clockwise until it is firmly
in position
§ Place components inside the chamber in the
following order:
– Base plate
– Weighing pan receptor
– Weighing pan
$ To access the weighing chamber from the side,
remove side panels as desired
8
Balances/Scales with a Rectangular Weighing Pan
and a Weighing Capacity up to 10 kg
§ Place the components listed below on the
balance/scale in the order given:
– Weighing pan
– Gem tray (GPA scales only)
Balances with a Rectangular Weighing Pan and
a Weighing Capacity over 10 kg
§ Place the weighing pan on the balance
9
Connecting the Balance to AC Power/
Safety Precautions
$ Use only original Sartorius equipment.
The AC adapter meets the requirements of IP20 in
accordance with EN 60529.
$ For AC adapters with higher protection ratings
or for an external rechargeable battery pack, please
see “Accessories."
CPA26P, CPA225D:
G Insert the right-angle plug from the AC adapter into
the jack on the electronics box.
All other balances with a weighing capacity
up to 10 kg:
G Insert the right-angle plug from the AC adapter
into the jack on the balance.
G Connect the AC adapter to an electrical outlet
(mains supply)
AC Adapter with Country-specific Power Cord
Some models come with separate country-specific
power cords for the AC adapter. In Europe, use only
original Sartorius AC adapter part no. 6971983.
§ Connect the angle plug to the balance/scale
§ Select the power cord for your area and connect it to
the AC adapter
§ Plug the power cord into the wall outlet (mains)
Connect the power cord to the AC adapter
(on balances with weighing capacities up to 10 kg)
$ Use an original Sartorius AC adapter with a wide input
voltage range (100 to 240 V~), order no. 6971966,
and replaceable power cord:
6900900 (Europe)
6900901 (US/CDN)
6971945 (UK)
6900905 (AUS)
6900902 (ZA)
10
Balances with a Weighing Capacity over 10 kg:
G Insert the right-angle plug into the jack and
tighten the screw.
G Connect the AC adapter to an electrical outlet
(mains supply)
Safety Precautions
Plug-in AC Adapter:
The balance/scale is intended to be supplied by a
listed direct plug-in power unit marked “Class 2."
Universal AC Adapter 6971966:
The AC adapter rated to Class 1 can be plugged
into any wall outlet without additional safety
precautions.
The ground terminal is connected to the balance
housing, which can be additionally grounded
for operation. The data interface is also electrically
connected to the balance housing (ground).
Note:
This equipment has been tested and found to
comply with the limits pursuant to part 15 of FCC
Rules. These limits are designed to provide reasonable protection against harmful interference. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with these instructions, may cause
harmful interference to radio communications.
For information on the specific limits and class
of this equipment, please refer to the Declaration
of Conformity. Depending on the particular class,
you are either required or requested to correct the
interference.
11
If you have a Class A digital device, you need
to comply with the FCC statements as follows:
“Operation of this equipment in a residential area
is likely to cause harmful interference in which case
the user will be required to correct the interference
at his own expense.”
If you have a Class B digital device, please read and
follow the FCC information given below:
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on
a circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
Before you operate this equipment, check which
FCC class (Class A or Class B) it has according
to the Declaration of Conformity included. Be sure
to observe the information of this Declaration.
12
Connecting Electronic Peripheral Devices
§ Make sure to unplug the balance from AC power
before you connect or disconnect a peripheral device
(printer or PC) to or from the interface port.
Warmup Time
To deliver exact results, the balance must warm up
as listed below after initial connection to AC power
or after a relatively long power outage.
– Model CPA2P…, CPA26P…: at least 4 hours
– All other precision and analytical models:
at least 30 minutes
Only after this time will the balance have reached
the required operating temperature.
Using Verified Balances in Legal Metrology:
$ Allow the equipment to warm up for at least
24 hours after initial connection to AC power.
Antitheft Locking Device on Balances with
a Weighing Capacity of up to 10 kg
G To secure the balance at the place of installation,
fasten a chain or a lock to the lug located on the
rear panel of the balance (order no.: LC1).
13
Leveling the Balance
Purpose:
– To compensate for unevenness at the place
of installation
Leveling Balances with a Weighing Capacity
of up to 10 kg
Only the 2 front feet are adjusted to level the
balance.
§ Retract the two rear feet (only on models with
a rectangular weighing pan).
§ Turn the 2 front feet as shown in the diagram
until the air bubble is centered within the circle of
the level indicator.
> In most cases this will require several adjustment
steps.
§ For weighing heavy samples: Extend the 2 rear
feet until they touch the surface on which the
balance rests (only on models with a rectangular
weighing pan).
Leveling Balances with a Weighing Capacity
of over 10 kg
§ Adjust the leveling feet until the air bubble
is centered within the circle on the level indicator.
14
Operation
Overview of Display and Operating Elements
15
1
2
2
14
13
12
11
3
4
5
6
10
9
7
8
Position Designation
Position Designation
1
2
3
10
4
5
6
7
8
9
Weight units
Tare key
Symbol: “GLP printing mode
active"
Symbol: “Printing mode active"
Display: Data in memory for
net-total formulation program
Data output: Press this key
to output readout values to the
built-in data interface.
Function key:
Start application program
Symbols for active application
Start calibration/adjustment
routine
11
12
13
14
15
Delete (Clear Function)
This key is generally used to
cancel functions.
– Quit application program
– Cancel calibration/
adjustment routine
On/off
Display: Calibration/adjustment
function
Display: Animal weighing with
automatic start
Symbols for stand-by mode
or zero range
Weight value displayed in selected
weight unit
15
Basic Weighing Function
Purpose
The basic weighing function can
be used alone or in combination with
an application program (counting,
weighing in percent, etc.).
Features
– Taring the balance
– Assigning IDs to weights (as needed)
– Printing weights
Using Verified Balances as Legal
Measuring Instruments in the EU*:
The type-approval certificate for verification applies only to non-automatic
weighing instruments. For automatic
operation with or without auxiliary
measuring devices, you must comply
with the regulations applicable to
the place of installation.
G Before using the balance as a legal
measuring instrument, calibrate and
adjust it at the place of use using the
built-in motorized calibration weight;
for details, see “Calibration and
Adjustment" in the next chapter.
$ The temperature range (°C) indicated
on the verification label may not be
exceeded during operation.
Example:
BD BL 200
+10°C to +30°C
0°C to +40°C isoCAL
K
* Including the Signatories of the Agreement on the European Economic Area
16
Working with CPA2P, CPA26P…
Models:
Working with the microbalance
requires a steady hand and a smooth,
uninterrupted technique.
Use forceps or other suitable utensil to
place the sample on the weighing pan.
Perform a number of test measurements
before you begin weighing, to allow the
temperature inside the weighing chamber
to adjust to the ambient temperature
outside the chamber. Otherwise, if the
chamber door was closed for a longer
period of time prior to beginning
weighing, the sudden change in temperature inside the chamber when you
open the door might affect the weight
readout. This is why a series of test
measurements is recommended; the
repeated opening and closing of the
weighing chamber door, at the same
rate of speed as will be used during the
actual weighing sequence, will both
compensate this difference in temperature to some extent and help you
develop a smooth working rhythm.
Place the sample gently on the weighing
pan. The weight readout should stabilize
within 15 to 20 seconds. The degree of
precision attained increases in proportion as the weighing operations become
more consistent.
Preparation
A circle in the upper right-hand corner of the display
indicates that the balance was disconnected from
power. This symbol is shown, for example, the first
time the balance is put into operation, or after a
power outage.
G Switch on the balance: Press (E)
> All symbols on the display light up briefly.
> The balance performs a display test.
$ Tare the balance, if necessary: Press (TARE)
When you turn on the balance, the b symbol is
displayed until you press a key.
If the b symbol is displayed during operation,
this indicates that the processor is performing
a function and cannot receive further commands
at the moment.
Additional Functions
G Switching off the balance: Press (E)
A circle in the lower left-hand corner of the display
indicates that the balance has been switched off and
is in stand-by mode.
Filter Weighing with Model CPA2P-F
The CPA2P-F filter microbalance comes with
a filter pan that has a utilizable diameter of 125 mm
as standard equipment. Place the filter on the pan
and close the lid.
17
Analytical and precision balances:
Below-Balance Weighing
A port for a below-balance weighing hanger
is located on the bottom of the balance (for models
with a weighing capacity of 12 kg or more, see
chapter on “Accessories.”
$ Below-balance weighing is not permitted in
legal metrology.
G Open cover plate on the bottom of the balance.
G Using the built-in hanger 1: Attach the sample
(e.g., using a suspension wire) to the hanger.
$ If necessary, install a shield for protection against
drafts.
1
Microbalance CPA2P..:
G Remove the brass screw
G Suspend the below-balance weighing hook
supplied from the hanger
G If necessary, install a shield for protection against
drafts
18
Example
Simple Weighing
Step
Key (or instruction)
Display/Data Output
1. Switch on the balance.
Self-test is performed,
followed by automatic
initial tare function.
(E)
+
0.0 g
+
11.5 g
+
0.0 g
2. Place container on the balance
(in this example, 11.5 g).
3. Tare the balance.
(TARE)
+ 132.0 g
4. Place sample in container
on balance
(in this example, 132 g).
6. Print weight.
(A)
N
+
132.0 g
19
Calibration and Adjustment
Purpose
Calibration is the determination of the
difference between the weight readout
and the true weight (mass) of a sample.
Calibration does not entail making any
changes within the balance.
Adjustment is the correction of any
difference between the measured value
displayed and the true weight (mass)
of the sample, or the reduction of the
difference to an allowable level within
the maximum permissible error limits.
Using Verified Balances as Legal
Measuring Instruments in the EU*:
Before using your balance as a legal
measuring instrument, you must perform
“internal calibration/adjustment" at the
place of installation after the warmup
period.
Features
Calibration/adjustment can be performed
only when:
– there is no load on the balance,
– the balance is tared, and
– the internal signal is stable.
If these conditions are not met,
an error message is displayed (Err 02).
Adjustment can be performed
– automatically following calibration
(1 10 1) or
– manually, at operator discretion,
after calibration (1 10 2)
* Including the Signatories of the Agreement on the European Economic Area
20
– The weight displayed for the sample
on the balance must not differ from the
nominal weight by more than 2%.
– You can use any of the following
weight units to calibrate/adjust the
balance: g, kg, lb
(1 11 1 to 3, factory setting: 1 11 1)
You can block calibration/adjustment
of the balance as follows:
– Select menu code1 9 7, or
– Close the menu access switch on the
back of the balance
– You can have calibration/adjustment
start automatically when a specified
time or temperature limit is reached
(isoCAL function; 1 15 3).
– You can have calibration and
adjustment results documented as
an ISO/GLP-compliant printout;
see the chapter on ISO/GLP-compliant
Printout/Record.
External Calibration/Adjustment
in Verified Balances of Accuracy
Class K
– When the balance is used in legal
metrology, external calibration/adjustment is blocked by a seal over the menu
access switch.
Internal Calibration/Adjustment
The menu code setting 1 9 3
must be selected in the Setup menu.
Inside the balance housing is a
motorized calibration weight which
is applied and removed automatically
for internal calibration.
G
Activate calibration: Press (CAL)
>
The built-in calibration weight is
applied automatically.
>
The balance is calibrated.
>
If “Calibrate, then auto adjust in one
operation" is selected in the Setup
menu, the balance is now adjusted
automatically.
>
!
Calibration and Adjustment Sequence
In the Setup menu, you can configure
whether:
– Calibration is always followed automatically by adjustment (1 10 1; factory
setting), or
– You have the choice of ending the
sequence or starting adjustment after
calibration (1 10 2)
If no difference is determined between
nominal and actual weights, you can
end the calibration/adjustment routine
following calibration.
Two keys are active at this point:
– (CAL) = start calibration/adjustment
– (CF) = end the sequence
The internal calibration weight is
removed.
Important note for calibration/adjustment of the CPA2P-F model: position
the cover before calibration/adjustment
21
isoCAL*:
Automatic Calibration and Adjustment
–
The menu code setting 1 15 3 must be
–
selected in the Setup menu.
– Temperature range with isoCAL:
0°C to +40°C
The “AUTOCAL" display automatically
begins flashing if the ambient temperature
has changed in relation to the temperature at the time of the last calibration/
adjustment, or after a defined time interval has elapsed. The balance is telling you !
that it wants to self-calibrate and adjust.
This adjustment prompt is activated when:
– The change in temperature or the elapsed
time interval is greater than that shown in
the table below
– The load on the pan has not been
changed within the last 2 minutes
– The balance has not been operated within
the last 2 minutes
– The weight on the pan is no more than 2%
–
of the maximum capacity of the balance
*= CPA64-WDS models:
factory setting isoCAL off (Code 1 15 1)
–
When these requirements are met,
the following symbols are displayed:
C in the measured value line
AUTOCAL flashes in the symbol display
In the Setup menu, you can configure
the balance to display the adjustment
prompt only, without performing
calibration/adjustment automatically
(menu code 1 15 2).
Important note for calibration/adjustment of the CPA2P-F model: position
the cover before calibration/adjustment.
This is necessary to enable automatic
calibration (isoCAL) to take place.
isoCAL Deactivated on Verified
Balances:
The permitted operating temperature
range for balances used in applications
subject to legal metrology (legal for
trade) is restricted as follows:
Balances of accuracy class k:
+15°C to 25°C (+59 to +77°F)
Balances of accuracy class K:
+10°C to +30°C (+50 to 86°F)
Fully automatic adjustment is initiated under the following conditions:
Model
When the
temperature
changes by
CPA2P, CPA2P-F, CPA26P, CPA225D, CPA324S, CPA224S,
CPA124S, CPA64, CPA1003S, CPA1003P, GCA1603, GCA803 1.5 Kelvin
CPA623S, CPA423S, CPA6202S, CPA5202S-DS, CPA6202P,
CPA4202S, CPA523S-PCE, GPA5202, GPA3202
2 Kelvin
CPA323S, CPA2202S…, CPA34001P, CPA34001S,
CPA223S, CPA3202S, GCA2502
4 Kelvin
CPA5201, CPA2201-0CE, CPA10001, CPA16001S
CPA12001S, CPA34000, CPA8201
4 Kelvin
These values are also set in the corresponding verified balances
(CPA…-0CE/-PCE models with the -0CE designation).
22
After a time
interval of
4 hours
6 hours
12 hours
24 hours
Internal Calibration
Step
Key (or instruction)
1. Zero the balance.
(TARE)
Display
0.0 g
CPA2P-F model:
Either position the standard pan
(8 g) or the filter pan (5 g) along
with the cover (3 g) beforehand.
2. Start calibration.
The internal weight is
applied automatically.
C
(CAL)
3. The balance is calibrated
(displayed only if menu
code 1 10 2 is set).
4. If the “Calibrate, then auto
adjust" setting is selected
(1 10 1), the balance is
now adjusted automatically.
5. The calibration sequence
is completed.
6. The internal weight is removed.
CAL
–
CAL
0.2 g
±
G
Adjust*
CAL
CC
CAL
0.0 g
* = Adjust displayed only if menu item 1 10 2 is selected.
23
External Calibration
Settings:
Calibration/adjustment mode: External calibration/adjustment (menu code 1 9 1)
The weight required for calibration/adjustment is defined in the factory settings
(see “Specifications").
Step
Key (or instruction)
1. Zero the balance.
(TARE)
2. Start calibration.
(CAL)
Display
0.0 g
+ 5000.0 g
G
CAL
3. Apply the prompted calibration
weight (in this example, 5000 g).
4. The balance is calibrated
(displayed only if menu
code 1 10 2 is set).
–
5. If the “Calibrate, then auto
adjust" setting is selected
(1 10 1), the balance is now
adjusted automatically.
Adjust*
6. The calibration/adjustment
sequence is completed.
7. After calibration/adjustment, the
weight is displayed with weight unit.
8. Remove the calibration weight.
CAL
0.2 g
±
G
CAL
CC
CAL
+ 5000.0 g
0.0 g
* Adjust shown only if menu code 1 10 2 is set.
Important note: Afterwards, do not perform internal calibration/adjustment again.
24
Configuration
Purpose
To adapt the balance to individual
requirements by choosing from
parameters options in the Setup menu.
G Printing the Parameter Settings
– At the 3rd menu level (lowest level;
see also the next page): Press and hold
(A) (> 2 sec.).
Features
To open the Setup menu, switch the
balance off and then on again by
pressing (E). While all segments are lit,
press (TARE) briefly.
> Printout (Example)
Menu 7 1
Scroll upward ↑:
Press (CAL)
Scroll to the right →:
Press (A)
Confirm input:
Press (TARE)
Save settings and exit menu:
Press and hold (TARE) (> 2 sec.)
> Printout (Example)
Menu 7 1
Menu 7 2
Menu 7 3
1
– At the 2nd menu level:
Press and hold (A) (> 2 sec.).
1
1
1
– All current menu settings are printed
when the 1st menu level (highest level)
is displayed: Press and hold (A)
(> 2 sec.).
25
Setting the Parameters (Menu Codes)
Example: Adapting the balance to “very unstable" ambient conditions (menu code 1 1 4).
Step
Key (or instruction)
1. Switch off the balance.
(E)
2. Switch the balance on;
(E)
while all segments
are displayed:
(TARE) briefly
Display
1
2
$ Scroll upward within a
menu level; after the last
menu code, the first
code is displayed again.
(CAL)
repeatedly
3. Select menu level 2
(scroll to the right).
(A)
9
1
1 1
4. Select menu level 3
(scroll to the right).
(A)
1 1 2o
5. Menu level 3:
Scroll until the desired
number is shown.
(CAL)
repeatedly
1 1 4
6. Confirm change;
“o” on display indicates
active setting.
(TARE)
1 1 4o
$ Return to higher menu level
(from the third level).
(A)
1
$ Set other codes as desired.
(A), (CAL)
7. Save changes and exit
the menu
Press and hold
(TARE) (> 2 sec.)
or
$ Exit menu without saving
changes.
26
(E)
...
Parameter Settings (Overview)
o Factory setting
√ User-defined setting
Setup
g
tin
l3
m
set
eve
l
ite
y
r
to
nu
nu
Me
Fac
Me
1 1 1
Very stable conditions
1 1 2
o Stable conditions
1 1 3
Unstable conditions
1 1 4
Very unstable conditions
el 1
lev
u
n
Me
el 2
lev
u
n
Me
1
1 1
Adapt filter
1 2
Application filter
1 2 1
1 2 2
1 3
Stability range
The stability symbol is
displayed when the
value is stable within
this number of digits.
1
1
1
1
1
1
Tare function*
1 5 1
1 5 2
Weighing
1 5
1
2
3
4
5
6
1 6
Auto zero
1 6 1
1 6 2
1 7
Weight unit 1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 8
2 through 9
3
3
3
3
3
3
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
o
o
o
o
o
Final readout
Filling mode
4 digit
1 digit
1 digit
2 digits
4 digits
8 digits*
Without stability
After stability
On
Off
Grams (display: o)*
Grams (display: g)
Kilograms 1)
Carats
Pounds*
Ounces*
Troy ounces*
Hong Kong taels*
Singapore taels*
Taiwanese taels*
Grains*
Pennyweights*
Milligrams 2)
Parts per pound*
Chinese taels*
Mommes*
Austrian carats*
Tola*
Baht*
Mesghal*
see next page
see following pages
* = Not available in balances verified for use in legal metrology
1) = Not available for models with a readability < 0.1 mg
2) = Not available for verified balances of accuracy class K
27
Menu
el 1
lev
nu
e
M
1 Weighing
el 2
lev
nu
e
M
1 1 through 1 7
ing
el 3
ett
m
lev
ite
ys
r
u
o
t
n
nu
Me
Fac
Me
see previous page
1 8
Display accuracy 1 *
1 8 1
1 8 5
1 9
(CAL) key function
1 9 1
1 9 3
1 9 6
o
o
1 9 7
1 10 Calibration/
adjustment sequence
1 10 1
2
Application
programs
3 through 9
1 11 1
1 11 2
1 11 3
1 15 isoCAL function
1 15 1
1 15 2
1 15 3
2 1
Program selection
see next page
* = Setting cannot be changed on verified balances
= Not available for verified balances of accuracy class K
= Factory setting for CPA64-WDS
3) = Not available for CPA…-PCE models
1)
2)
28
2
2
2
2
2
2
1
1
1
1
1
1
1
2
4
5
6
7
External cal./adj.1)
Internal cal./adj.
CPA225D model:
Internal linearization
(CAL) key blocked
o
Calibrate, then auto adjust
in one operation
Calibrate, then manual
adjust
o
Grams
Kilograms
Pounds
1 10 2
1 11 Weight unit for
calibration weight *
All digits
Reduced by 1 digit*
o
o
Off 2)
Only adjustment prompt
On
Weighing
Toggle weight units
Counting
Weighing in percent 3)
Net-total formulation
Animal weighing 3)
Menu
el 1
lev
nu
e
M
el 2
lev
nu
e
M
1
through 2
see previous page
3
Application
parameters
3 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
3 2 1
3 2 5
3 5
Storage parameter
for Counting and
Weighing in Percent
3 5 1
Decimal places for
calculations
3
3
3
3
Animal activity
3 7 1
3 7 2
3 7 3
3 8
5 through 9
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Display accuracy 2*
3 7
Application
parameters
Counting
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3 2
3 6
4
Weight unit 2
ing
el 3
ett
m
lev
ite
ys
r
u
o
t
n
nu
Me
Fac
Me
4 1
Start Animal weighing
Autom. reference
sample updating
3 5 2
6
6
6
6
1
2
3
4
3 8 1
3 8 2
4 1 1
4 1 2
o
o
Grams (display: o)*
Gramm (Anzeige: g)
Kilograms 1)
Carats
Pounds*
Ounces*
Troy ounces*
Hong Kong taels*
Singapore taels*
Taiwanese taels*
Grains*
Pennyweights*
Milligrams 2)
Parts per pound*
Chinese taels*
Mommes*
Austrian carats*
Tola*
Baht*
Mesghal*
All digits
Reduced by 1 digit
Internal resolution
o
o
o
o
o
Display accuracy with
higher stability
None
1 decimal place
2 decimal places
3 decimal places
Calm
Normal
Strong vibration
Manual start
Automatic start
Off
On
see next page
* = Setting cannot be changed on verified balances
1) = Not available for models with a readability < 0.1 mg
2) = Not available for verified balances of accuracy class K
29
Menu
el 1
lev
nu
e
M
1 through 3
el 2
lev
nu
e
M
see previous page
5
5 1
Data interface
5 2
Baud rate
Parity
ing
el 3
ett
m
lev
ite
ys
r
u
o
t
n
nu
Me
Fac
Me
5
5
5
5
5
5
5
5
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
5
5
5
5
2
2
2
2
1
2
3
4
5 3
Number of stop bits
5 3 1
5 3 2
5 4
Handshake mode
5 4 1
5 4 2
o
o
o
o
5 4 3
5 5
6
Print for
weighing
6 1
Communication mode
Manual/auto/mode
5 5 1
5 5 2
o
6 1 1
6 1 2
o
6 1 3
6 1 4
6 1 5
6 1 6
6 2
7 through 9
1)
150 baud
300 baud
600 baud
1,200 baud
2,400 baud
4,800 baud
9,600 baud
19,200 baud
Mark
Space
Odd
Even
1 stop bit
2 stop bits
Software
Hardware,
2 char. after CTS
Hardware,
1 char. after CTS
SBI (ASCII) 1)
Universal printer
Manual without stability
with (A) key
Manual after stability
with (A) key
Manual at stability
with (A) key
Automatic without stability
Automatic at stability
Automatic when load
is changed 1)
Stop automatic
printing
6 2 1
6 2 2
6 3
Time-dependent
autom. printing
6 3 1
6 3 2
o
1 display update
2 display updates
6 4
Tare the balance
after ind. printout
6 4 1
6 4 2
o
Off
On
o
Manual with (A) key
Not stoppable
see next page
= Note concerning balances verified for legal metrology:
In the “SBI” setting, the non-verified digit indicated is not automatically identified.
Be sure to take the steps or make the settings on the auxiliary device so that these digits are properly identified.
See also the “Interface Port” chapter.
2) = Auto print when load change is > 10 d and stability is reached: no printout until residual difference in load
value is < 5 d
30
el 1
lev
nu
e
M
Menu
el 2
lev
nu
e
M
1
through 6
see previous page
7
Printing with
application
programs
7 1
7 2
7 3
8
Extra
functions
8 1
ing
el 3
ett
m
lev
ite
ys
r
u
o
t
n
nu
Me
Fac
Me
Print
application
parameters
7 1 1
7 1 2
7 1 3
Line format
of printout
7 2 1
o
o
Printout with
Net-total
program
7 3 1
o
Autom. printout
of last net value
Autom. printout
of tare value
Menu*
8 1 1
o
Parameter settings
alterable
Parameters “read only"
7 3 2
8 2
Acoustic signal
8 2 1
8 2 2
o
On
Off
8 3
Keypad
8 3 1
8 3 2
o
Accessible
Blocked
8 4
External switch
function
8
8
8
8
8
1
2
3
4
5
o
(A) key
(TARE) key
(CAL) key
(F) key
(CF) key
8 5
Power-on mode
for balance
8 5 1
8 5 3
8 5 4
o
Off/on/standby
Standby/on
Auto on
8 8
Reference balance
for Counting
8 8 1
8 8 2
8 8 3
o
Off
On for QC scale
On for FB /FC /LA /LP
balances/scales
On for isi terminal
o
No ISO/GLP printout
For calibration/adjustment only
Always on
4
4
4
4
4
8 8 4
Reset menu
For raw data
(16 characters)
For other apps.
(22 characters)
7 2 2
8 1 2
9
Off
On; all parameters
On; main
parameters only
8 10 ISO/GLP-compliant
printout
8 10 1
8 10 2
8 10 3
9 –
9 – 1
9 – 2
Factory settings
Restore
Do not restore
*= Setting cannot be changed on verified balances
31
Setting IDs, Time, Date
and Display Brightness
Purpose
Configuring measurement environment parameters
for ISO/GLP-compliant data records.
Setting date and time (for ISO/GLP-compliant
records only).
Adapting display to ambient lighting conditions.
Features
– Enter up to 8 characters to identify a measurement
series. Permissible characters include the numbers
0 through 9 and the dash or minus sign (“–").
A dash is output as a space on printouts. Leading
zeroes are not output.
– Date and time at beginning and end of ISO/GLPprintouts.
– Display brightness 1):
0 = off; levels of brightness: 1 through 9
Key functions during configuration:
Activate input of IDs, time and date:
Switch the balance off and then on again by
pressing (E); while all segments are displayed,
press the (F) key briefly
Scroll upward ↑: Press (CAL)
Scroll to the right →: Press (A)
Confirm input and toggle between IDs,
time and date: Press (TARE)
Save settings and exit menu:
Press and hold (TARE) (> 2 sec.)
1)
32
No display backlighting on models CPA2P…,
CPA26P(-0CE) and CPA225D(-0CE)
Example: Setting the time, date and display brightness
Step
Key (or instruction)
1. Switch off the balance.
(E)
2. Switch the balance on;
(E)
while all segments
are displayed:
Display
(F) briefly
--------
$ To move the cursor within
ID number:
(A)
repeatedly
--------
$ ITo set or change ID:
(CAL)
repeatedly
-3------
3. Confirm ID and activate
time setting.
(TARE)
H10.14.11
(CAL)
H10.14.19
(A)
H10.15.19
(CAL)
H10.15.00
4. Select 24-hour clock (“H") or
112-hour clock (“P").
5. Toggle between hours,
minutes, seconds and 12-hour
or 24-hour time mode.
6. Synchronize seconds with
a reference clock.
7. Confirm time and activate date. (TARE)
29.jan.01
8. Set date
“Day,"
“Month," and,
01.jan.01
if desired, “Year."
Confirm date and activate
display brightness.
(CAL) repeatedly,
(A)
(CAL) repeatedly
(A)
(CAL) repeatedly
(TARE)
22.apr.01
22.apr.01
33
Step
Key (or instruction)
Display
9. Set display brightness.
(CAL) repeatedly
lamp 7
10. Save changes and exit
the menu
Press and hold
(TARE) (2 sec.)
or
$ Exit menu without
saving changes.
34
(E)
Application Programs
Function Keys
(F) key:
Start application program/
store component
(F) key
press and
hold for
2 seconds
Toggle between component
weight and total weight
(net-total formulation);
change reference quantity
(counting), reference percentage
(weighing in percent) or number
of measurements (animal weighing)
(CF) key:
End application program; delete
Using Verified Balances as Legal Measuring
Instruments in the EU*:
All application programs can be selected on balances
used as legal measuring instruments.
Calculated values are alternately indicated with the
following symbols:
– Percent
=%
– Piece count (Counting) = pcs
– Computed value
= o, G
* Including the Signatories of the Agreement
on the European Economic Area
35
Net-total Formulation
Menu code: 2 1 6 *
Display symbol: R
Purpose
With this application program you can weigh in
different components up to a defined total.
Features
– Weigh up to 99 components from “0" to a defined
total component weight.
– Store component weights (“Store xx comp."), with
– display zeroed automatically after value is stored,
and
– automatic printout
– Clear component memory following cancellation
of the weighing sequence [by pressing (CF)] and
printout of the total weight.
– Toggling between component weight and total
weight by pressing and holding (F) (2 sec.).
– Printout of the total of the individual component
weights (T COMP)
* = Factory setting on CPA…-PCE models
36
Preparation
Set parameters for net-total formulation:
§ Set parameters for automatic printout when
component stored
2 Application programs
2 1 Program selection
2 1 6 * Net-total
7 Print for application
7 1 Print application parameters
7 1 1 Off
7 1 2 ο On; all parameters
7 1 3 On; main parameters only
7 3 Printout of net-total formulation data
7 3 1 ο Autom. print of last net value
7 3 2 Autom. print of tare value
ο
*
= Factory setting
= Factory setting on CPA…-PCE models
Printout of Net-total Formulation Data
COMP2 +
T COMP+
T1
+
N1
+
278.1
2117.5
1821.5
278.1
N
2099.6 g :
+
g:
g:
g:
g:
Second component
Sum of components
Tare weight (2nd tare memory)
Net weight = Gross – tare
2nd tare memory
Net weight = Gross – tare
37
Example: Counting parts into a container
Settings: Application program: Net-total formulation 2 1 6;
Print application parameters: On, print all 7 1 2; Automatic printout of last net value 7 3 1
Step
Key (or instruction)
+
1. Place empty container
on the balance.
2. Tare the balance.
65.0 g
0.0 g
(TARE)
+ 120,5 g
3. Add first component.
4. Store component data.
Display/Data output
0.0 g NET
(F)
COMP1 +
+
5. Add next component.
6. Store component data.
(F)
70,5 g
0.0 g NET
COMP2 +
7. Weigh in further components
as desired.
Repeat steps
5 and 6.
8. Continue filling to target
(view total).
press and hold (F)
(2 sec.)
38
120.5 g
+ 191,0 g
G
70.5 g
Step
Key (or instruction)
Display/Data output
+ 203,5 g
9. Add last component.
G
10. Store component data.
(F)
0.0 g NET
COMP 3+
11. Display total weight.
(CF)
12.5 g
+ 203,5 g
T COMP+
203.5 g
39
Counting
Menu code: 2 1 4
Display symbol: Z
Purpose
With the Counting program you can
determine the number of parts that
each have approximately equal weight.
To do this, a known number of parts
(the reference sample quantity) is
weighed first, and the individual piece
weight (reference weight) is calculated
from this result. Thus the number
of parts subsequently placed on the
balance can be determined from
their weight.
Features
– The minimum load is equal to one digit,
defined according to the resolution of
the active weight unit.
– Press and hold the (F) key (2 seconds) to
set the reference sample quantity.
– Configure the resolution used when
reference sample quantity is stored and
piece counts are calculated.
– Optional automatic output of the piece
count and average piece weight to the
data interface port when the menu
code 7 1 2 (print application parameters) is set.
40
– Long-term storage of the last reference
sample quantity “nRef" entered.
– Toggling between piece count and
weight by pressing (F).
Function Keys
(F):
Begin determination of piece weight
> Application program initialized with
predefined reference sample quantity.
(CF):
End application program; clear
initialization data
§
>
$
§
Changing the reference sample
quantity:
Press and hold (F) (2 sec.)
Current reference sample quantity
is displayed.
Press (F) briefly to change the value;
press repeatedly until the desired reference sample quantity is displayed.
Quantities to choose from: 1, 2, 5, 10,
20, 50, 100.
Store setting in long-term memory:
Press and hold (F).
Reference Sample Updating
Automatic reference sample updating
optimizes the counting accuracy.
You can activate or deactivate this
function in the Setup menu.
§ Please order the required connecting
cables directly from Sartorius.
When this function is active, automatic
reference sample updating is performed
when the criteria of the factory-set
parameters are met.
–
–
–
–
> The abbreviation opt, for “optimizing,"
is displayed briefly with the new
reference sample quantity.
Reference Balance/Scale
(Counting with two balances/scales)
Purpose:
Use of a reference balance/scale affords
higher precision in counting large
amounts of parts. The CPA balance is
used to determine the reference weight.
The following weighing instruments or
terminals can be used for sample
weighing in conjunction with a reference balance/scale:
– For a QC scale: set menu code 8 8 2
– For an FB/FC/LA/LP balance/scale:
set menu code 8 8 3
– For an isi terminal:
set menu code 8 8 4
The following settings must have
the same configurations in both balances/scales:
Counting program
Weight units
Settings in the CPA balance:
Menu codes 7 1 2 and 7 2 2
All data interface parameters:
– Baud rate
– Parity
– Number of stop bits
– Handshake mode
Transferring the Reference Value from
the CPA Reference Balance:
– Press the (F) key
> The reference value is passed to the
counting balance/scale
Counting Balance/Scale:
$ Refer to the operating manual of
the particular weighing instrument for
further instructions
41
Preparation
Set parameters for the Counting program:
$ Select the application program in the Setup menu
§ Set the following parameters:
2 Application programs
2 1 Program selection
2 1 4
Counting
3 Application parameters
3 5 Storage parameter
Standard resolution
(internal resolution)
3 5 2 ο 10 + higher resolution
3 5 1
4 Application parameters for Counting
4 1 Autom. ref. sample updating
4 1 1 ο Off
4 1 2 On
8 Extra functions
8 8 Reference balance/scale
8
8
8
8
8
8
8
8
1ο
2
3
4
Off
On for QC scales
On for FB-/FC-/LA-/LP models
On for isi terminals
ο = Factory setting
Printout: Counting
nRef
wRef
Qnt
42
+
+
+
10
:
21.14 g
:
500 pcs :
Reference sample quantity
Reference weight
Calculated quantity
Example: Counting parts of equal weight
Settings:
Menu: Counting program (menu code 2 1 4)
Step
Key (or instruction)
+
1. Place empty container
on the balance/scale.
2. Tare the balance.
Display/Data output
22.6 g
0.0 g
(TARE)
3. Add reference sample quantity
to container
(in this example: 10 pcs).
4. Initialize the balance.
(F)
ref 10 (briefly)
+ 2.14 g
+
10 pcs
nRef
wRef
+
5. Add uncounted parts
as desired.
+
+
10 pcs
2.14 g
500 pcs
6. Print piece count, if desired.
(A)
Qnt
7. Display weight.
(F)
+ 1070.0 g
8. Display piece count.
(F)
+
500 pcs
–
0 pcs
9. Unload the balance.
+
500 pcs
10. Repeat as necessary,
starting from Step 5.
11. Delete reference
sample quantity
(CF)
0.0 g
43
Weighing in Percent
Menu code: 2 1 5 *
Display symbol: %
– Long-term storage of the last reference
percentage “pRef” entered.
Purpose
This application program allows you to
obtain weight readouts in percent which
are in proportion to a reference weight.
– Toggling between percentage and
weight by pressing (F).
Features
– The minimum load is equal to one digit,
defined according to the resolution of
the active weight unit.
– Press and hold the (F) key (2 seconds)
to set the reference percentage
– Storage parameter (rounding-off factor)
for storing the reference weight
to calculate the percentage can be
configured.
– Configuration of decimal places displayed with a percentage.
– Optional automatic output of the
reference weight “Wxx%” and reference
percentage to the data interface port
when the menu code 7 1 2 (print
application parameters) is set.
* = not available for CPA…-PCE models
44
Function Keys
(F):
Begin calculation of percentage
> Current weight value stored as
reference weight “Wxx%” to be
loaded at initialization.
(CF):
End application program;
clear initialization data
Changing the reference percentage:
§ Press and hold (F) (2 sec.)
> Current reference percentage is
displayed.
$ Press (F) briefly to change the value;
press repeatedly until the desired
reference percentage is displayed.
Quantities to choose from: 1, 2, 5, 10,
20, 50, 100.
§ Store setting in long-term memory:
Press and hold (F).
Preparation
Set parameters for the Weighing in
Percent program:
$ Select the application program in the
Setup menu
§ Set the following parameters:
2 Application programs
2 1 Program selection
2 1 5
Weighing in percent*
3 Application parameters
3 5 Storage parameter
3 5 1 ο Standard resolution
(internal resolution)
3 5 2 10 + higher resolution
3 6 Decimal places for calc.
3
3
3
3
ο
*
6
6
6
6
1
2ο
3
4
None
1 decimal place
2 decimal places
3 decimal places
= Factory setting
= Not in CPA…-PCE models
Printout: Weighing in Percent
pRef
Wxx%
Prc
+
+
+
100 % :
111.6 g :
94.7 % :
Reference percentage
Reference weight net xx%
Calculated percentage
45
Example: Determining residual weight in percent
Settings:
Menu: Weighing in percent program (menu code 2 1 5),
Print application parameters: On; all parameters (menu code 7 1 2),
Reference percentage: ref 100% (Code )
Step
Key (or instruction)
+
1. Place empty container
on balance
2. Tare the balance.
Display/Data output
22.6 g
0.0 g
(TARE)
3. Place sample equal to 100%
of reference percentage on the
balance (in this example:
111.6 g).
4. Initialize the balance.
(F)
ref 100 (briefly)
+ 111.6 g
+ 100.0 %
pRef
Wxx%
+
+
100 %
111.6 g
5. Remove container; e.g., to
treat sample (in this example,
the sample is now dried).
+
6. Place container with sample
on the balance again
(after treatment).
94.9 %
7. Optional: print percentage.
(A)
Prc
8. Display residual weight and
delete reference value.
(CF)
+ 105.9 g
9. Optional: print net
residual weight.
(A)
N
46
+
+
94.9 %
105.9 g
Animal Weighing/Averaging
Menu code: Code 2 1 7 *
Display symbol: V
Purpose
Use this program to determine the
weights of unstable samples (e.g., live
animals) or to determine weights under
unstable ambient conditions. With this
program, the balance calculates the
weight as the average of a defined
number of individual weighing operations (also referred to as “subweighing
operations").
Features
– Animal weighing started manually
or automatically
– Minimum load threshold for starting
animal weighing:
– for automatic start:
100 display intervals
– for manual start:
50 display intervals
– Automatic start:
Begin the averaging operation by
pressing (F). “AUTO” is displayed
during weighing to indicate that
the following values will be averaged
automatically.
Animal activity: Averaging begins
automatically once two subweights are
measured within a predefined tolerance
range (calm = 2%, normal = 5%,
active = 20%).
– Number of weighing operations for
calculation of an average mDef can be
set before the beginning of each series.
– Number of remaining weighing
operations in the current series is shown
during weighing.
– Arithmetic average displayed as a result
in the pre-set weight unit (identified by
G). The V symbol flashes during this
time.
– Toggling between weighed and
calculated results by pressing (F)
(after initialization)
– Unload threshold is one-half of the
minimum load.
– Balance/scale returns to the basic
weighing mode when unloaded;
i.e., when the load is below the unload
threshold
Function Keys
(F):
Activate animal weighing program
(CF):
End application program; delete result;
interrupt measuring operation.
§
>
$
§
Changing the number of subweighing
operations:
Press and hold (F) (2 sec.)
Current number of subweighing
operations is displayed.
Press (F) briefly to change the value;
press repeatedly until the desired
number is displayed.
Quantities to choose from: 5, 10, 20,
50, 100.
Store setting in long-term memory:
Press and hold (F).
* = not available for CPA…-PCE models
47
Preparation
Set parameters for the
Animal Weighing program:
$ Select the application program
in the Setup menu
§ Set the following parameters:
2 Application programs
2 1 Program selection
2 1 7
Animal weighing*
3 Application parameters
3 7 Animal activity
Calm (2% of the
animal/object)
3 7 2 ο Normal (5% of the
animal/object)
3 7 3 Strong vibration (20%
of the animal/object)
3 7 1
3 8 Start
3 8 1 Manual
3 8 2 ο Automatic
ο
*
= Factory setting
= Not in CPA…-PCE models
Printout: Animal Weighing
mDef
x-Net +
48
20
:
401.1 g :
Number of subweighing operations
Calculated average
Example: Determining animal weight with automatic start of 20 subweighing operations
Settings:
Menu: Animal weighing program (menu code 2 1 7),
Print application parameters: On; all parameters (menu code 7 1 2)
Step
Key (or instruction)
1. Switch on the balance.
(E)
+
2. Place animal weighing bowl
on the balance.
3. Tare the balance.
(TARE)
4. Place the first animal
in bowl.
5. Start automatic animal
weighing. The balance delays
starting the subweighing
operation until successive
subweights lie within the
range defined.
Display/Data output
22.6 g
0.0 g
Weight value fluctuates due
to animal activity.
(F)
6. After 20 subweighing operations
the arithmetic average “x-Net"
is displayed.
7. Unload the balance.
888
20
19
18
...
1
+ 410.1 g G
mDef
x-Net +
20
410.1 g
0.0 g
8. Weigh next animal (if applicable).
Next weighing series begins
automatically.
49
Toggling between Weight Units
Menu code: 2 1 2
With this application program you can switch the display of a weight value back and
forth between two weight units.
Configure the “Toggle Weight Units" application in the Setup menu:
see “Configuration" Menu code: 2.1. 2
(Factory setting on GCA and GPA models)
Menu code
Weight unit 1
Weight unit 2
Unit
Conversion
Display
Printout
1 7 1
1 7 2ο
3 1 1ο
Grams 1)
1.00000000000
o
o
3 1 2ο
Grams 2)
1.00000000000
g
g
1 7 3
3 1 3
Kilograms 3)
0.00100000000
kg
kg
1 7 4ο
3 1 4
Carats
5.00000000000
ct
ct
1 7 5
3 1 5
Pounds*
0.00220462260
lb
lb
1 7 6
3 1 6
Ounces*
0.03527396200
oz
oz
1 7 7
3 1 7ο
Troy ounces*
0.03215074700
ozt
ozt
1 7 8
3 1 8
Hong Kong taels*
0.02671725000
tl
tlh
1 7 9
3 1 9
Singapore taels*
0.02645544638
tl
tls
1 7 10
3 1 10
Taiwanese taels*
0.02666666000
tl
tlt
1 7 11
3 1 11
Grains*
15.4323583500
GN
GN
1 7 12
3 1 12
Pennyweights*
0.64301493100
dwt
dwt
1 7 13
3 1 13 ο
Milligrams 4)
1000.00000000
mg
mg
1 7 14
3 1 14
Parts per pound*
1.12876677120
o
/lb
1 7 15
3 1 15
Chinese taels*
0.02645547175
tl
tlc
1 7 16
3 1 16
Mommes*
0.26670000000
m
mom
1 7 17
3 1 17
Austrian carats*
5.00000000000
K
K
1 7 18
3 1 18
Tola*
0.08573333810
t
tol
1 7 19
3 1 19
Baht*
0.06578947437
b
bat
1 7 20
3 1 20
Mesghal*
0.21700000000
m
MS
o
*
1)
2)
3)
4)
= Factory setting, depends on model
= Not available in verified balances
= GPA5202/GPA3202: readability with Taiwanese taels reduced by one decimal place
= GCA1603P, GCA803S: readability 0.0002 g; GCA2502: readability 0.001 g
= Not available in the CPA64-0CE
= Not available in verified balances/scales of accuracy class K
Function
G Press (F) to toggle between weight unit 1 and weight unit 2
50
Generating a Printout
Purpose
You can generate printouts that include
weights, other measured values and
identification codes for documentation
purposes. You can format the printout
to meet individual requirements.
Features
Printouts generated automatically or
manually (at the press of a key): weight
or calculated value is output.
Line format: Values printed with up
to 6 preceding characters for identification.
Print application parameters:
Printout of initialization values before
printing measurement results.
ISO/GLP-compliant printout:
Printout of ambient characteristics.
Printouts generated automatically
or by pressing (A), dependent on or
independent of stability.
–
–
–
–
You can have the following values
output automatically when using the
application programs if menu code
7 1 2 is configured (printout with data
ID codes):
Net-total: Component or total weight
Counting:
Reference sample quantity (nRef)
Reference weight for one piece (wRef)
Weighing in percent:
Reference percentage (pRef)
Reference weight (Wxx%)
Animal weighing/averaging:
Number of subweighing operations
(mDef)
Calculated average (x-Net)
Factory settings:
Print manual/automatic: Individual
printout dependent on stability:
Manual at stability (menu code: 6 1 2)
Line format:
Up to 6 characters at the beginning
of each line to identify the weight
or calculated value: Print net, tare, or
gross value, reference sample quantity,
or average piece weight with ID
(menu code 7 2 2).
Print application parameters:
Printout of one or more initialization
values for the active application
program: On (menu code 7 1 2)
ISO/GLP-compliant printout:
No ISO/GLP-compliant printout
(menu code 8 10 1)
Auto print:
Automatic printout of weight values:
No default setting; see print manual/
automatic (menu code 6 1 2)
Auto print cannot be interrupted by
pressing (A) (menu code 6 2 2).
Auto print after each display update
(menu code 6 3 1)
§ Setting menu codes for the printout:
see “Configuration"
51
Printout without Data ID Codes: Examples
The value currently
displayed is printed (weight
or calculated value with unit)
+
+
+
+
1530.0
58.562
253
88.2
g
ozt
pcs
%
Weight in grams
Weight in Troy ounces
Piece count
Percentage
Printout with Data ID Codes:
The current value displayed
can be printed with a data
ID code of up to 6 characters
at the beginning of the line.
12345678
153.0 g
23.4 g
253 pcs
88.23 %
Identification*
Current net weight
Value in 2nd tare memory
Piece count
Percentage
* = on ISO/GLP records only
Comp7 +
278.1 g
T COMP+
nRef +
21.14 g
10
Net-total:
7th component weight
Net-total: Total
Counting: Reference
sample quantity
Counting: Reference weight
Weighing in percent:
Reference weight
ID
N
T1
Qnt
Prc
+
+
+
+
Print Application Parameters:
You can generate a printout of one or more of the
values configured for
initialization of an application as soon as you
initialize the balance/scale.
wRef
Wxx%
+
+
21.14 g
1200.0 g
N
Stat
Stat
Stat
+
153.0 g
Auto Print:
You can have the weight
readout printed automatically.
52
L
H
Net weight
Display blank
Display underload
Display overload
ISO/GLP-compliant Printout/Record
–
–
–
–
–
–
–
Settings
Features
You can have the parameters pertaining
to the ambient weighing conditions
printed before (GLP header) and after
(GLP footer) the values of a weighing
series. These parameters include:
G Setting menu codes for the printout
(see “Configuration"):
GLP header:
Date
Time at beginning of measurement
Balance manufacturer
Balance model
Balance serial number
Software version number
Identification number of the current
sampling operation
– Line format for printout:
With data ID codes - 22 characters:
menu code 7 2 2
GLP footer:
– Date
– Time at end of measurement
– Field for operator signature
The record is output to a Sartorius data
printer or a computer.
– ISO/GLP-compliant record after
calibration/adjustment only: menu
code 8 10 2; or ISO/GLP-compliant
record always on: menu code 8 10 3
! No ISO/GLP-compliant record is output
if any of the following settings are
configured: menu code 6 1 4, 6 1 5,
6 1 6 (automatic printout) or 7 2 1
Function Keys
Press (A) to output header and first
measured value.
> Header is output the first time (A)
is pressed
Press (F) to include output header and
reference data on automatic printouts
when an application program is active
Close the application:
1) Output GLP footer:
Press (CF)
2) End application program:
Press (CF)
53
The ISO/GLP-compliant printout can contain the following lines:
-------------------17-Jan-2007
10:15
SARTORIUS AG
Mod.
CPA10001
Ser. no.
10105355
Ver. no.
00-13-47
ID
2690 923
-------------------L ID
nRef +
10 pcs
wRef +
21.14 g
Qnt
+
235 pcs
Qnt
+
567 pcs
-------------------17-Jan-2007
10:20
Name:
--------------------
Dotted line
Date/time (beginning of measurement)
Balance manufacturer
Balance model
Balance serial number
Software version
ID
Dotted line
Measurement series no.
Counting: Reference sample quantity
Counting: Reference weight
Counting result
Counting result
Dotted line
Date/time (end of measurement)
Field for operator signature
Blank line
Dotted line
ISO/GLP-compliant printout for external calibration/adjustment:
-------------------17-Jan-2007
10:30
SARTORIUS AG
Mod.
CPA10001
Ser. no.
10105355
Ver. no.
00-13-47
ID
2690 923
-------------------Cal. Ext.
Set
+
5000.0 g
Diff. +
0.2 g
Cal. Ext. Complete
Diff. +
0.0 g
-------------------17-Jan-2007
10:32
Name:
--------------------
54
Dotted line
Date/time (beginning of measurement)
Balance manufacturer
Balance model
Balance serial number
Software version
ID
Dotted line
Calibration/adjustment mode
Calibration weight
Difference determined in calibration
Confirmation of completed calibration procedure
Difference from target following adjustment
Dotted line
Date/time (end of measurement)
Field for operator signature
Blank line
Dotted line
Interface Port
Purpose
Your balance is equipped with an interface
port for connection to a computer or other
peripheral device.
You can connect a computer to change,
start and/or monitor the functions of the
balance and the application programs.
Features
Type of interface: Serial interface
Operating mode: Full duplex
Standard: RS-232
Transmission rates:
150, 300, 600, 1200, 2400, 4800, 9600
and 19,200 baud
Parity: Mark, space, odd, even
Character format:
1 start bit, 7-bit ASCII, parity,
1 or 2 stop bits
Handshake:
2-wire interface:
via software (XON/XOFF)
4-wire interface:
Hardware via handshake lines (CTS/DTR)
Operating mode: SBI
Data output format of the balance:
16 or 22 characters
Factory settings:
Transmission rate: 1200 baud (5 1 4)
Parity: Odd (5 2 3)
Stop bits: 1 stop bit (5 3 1)
Handshake: Hardware, 2 characters
after CTS (5 4 2)
Operating mode:
Standard Sartorius interface SBI (5 5 1)
Print manually/automatically:
Manual after stability (6 1 2)
Preparation
§ see “Pin Assignments" and
“Pin Assignment Chart"
Identification of Non-Verified Digits
Non-verified digits when “e#d”
are automatically identified on the
printout:
Select universal printer:
menu code 5 5 2.
Brackets are used to identify
non-verified digits.
55
Output Format with 16 Characters
Display segments that are not activated are output as spaces.
The following characters can be output, depending on the characters displayed on the
balance:
Normal Operation
Position
or
or
*:
D:
U:
1
+
–
*
2
3
4
.
*
.
*
5
D
.
*
6
D
.
*
Space
Digit or letter
Unit symbol
7
D
.
*
8
D
.
*
9
D
.
*
CR:
LF:
10
D
.
*
11
*
12
U
*
13
U
*
14 15 16
U CR LF
*
12
*
13
*
14 15 16
* CR LF
12
*
13
*
14 15 16
* CR LF
Carriage return
Line feed
Special Codes
Position
1
2
3
4
5
*
6
*
or
or
or
*:
C:
Space
Calibration/adjustment
7
*
H
L
C
8
*
*
*
*
9
*
H:
L:
10
*
11
*
Overload
Underload
Error Codes
Position
*:
# # #:
56
1
2
3
4
E
Space
Error code number
5
r
6
r
7
*
8
#
9
#
10
#
11
*
Data output example: +123.56 g
Position
1
+
+
Position 1:
Position 2:
Positions 3–10:
Position 11:
Positions 12–14:
Position 15:
Position 16:
2
3
4
5
1
2
1
6
2
3
7
3
.
8
.
5
9
5
[
10
6
6
11
]*
12
g
g
13
14
15 16
CR LF
CR LF
Plus or minus sign or space
Space or brackets*
Weight with a decimal point; leading zeros = space
Space or brackets*
Unit symbol or space
Carriage return
Line feed
Output Format with 22 Characters
When data is output with an ID code, the ID code (consisting of 6 characters) precedes
the 16-character string described above.
These 6 characters identify the subsequent value.
1
I
I:
*:
D:
2
I
*
3
I
*
4
I
*
5
I
*
6
I
*
7
+
–
*
8
*
9 10 11 12 13 14 15 16 17 18 19 20 21 22
D D D D D D D D * U U U CR LF
. . . . . . . .
* * *
* * * * * * * *
U: Unit symbol1)
CR: Carriage return
LF: Line feed
ID code character
Space
Digit or letter
Example:
1
N
N
2
3
4
5
6
7
+
+
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22
1 2 3 . 5 6
g
CR LF
1 2 3 . 5 [ 6 ] g
CR LF
1)
Depends on balance type; for example, not all units or characters are available on balances verified for use in legal
metrology.
*) Identification of non-verified digits:
Non-verified digits where e=d are identified by brackets (square) if you select the following setting:
Parameter settings: Communication mode: Universal printer (menu code 5 5 2); “SBI” menu setting
In the “SBI” setting (menu code 5 5 1), non-verified digits displayed are not automatically identified as such.
Be sure to take the steps or make the settings on the auxiliary device for this purpose.
57
Special Codes
1
S
*:
2
t
3
a
4
t
5
*
6
*
7
*
8
*
Space
9 10 11 12 13 14 15 16 17 18 19 20 21 22
* * * * * * * * * * * * CR LF
H *
L *
H:
L:
Overload
Underload
Error Codes
1
S
*:
2
t
3
a
4
t
Space
ID code
characters I
Stat
T1
N
N1
COMPxx
T COMP
Qnt
wRef
nRef
Prc
Wxx%
pRef
mDef
x-Net
58
5
*
6
*
7
*
8
*
9 10 11 12 13 14 15 16 17 18 19 20 21 22
* E r r * # # # * * * * CR LF
# # #: Error code number
Meaning
Status
Tare T1
Net N
Net N1
Net-total: Component no.
Net-total: Total weighed in
Counting: Quantity
Counting: Reference weight
Counting: Reference sample quantity
Weighing in percent: Percentage
Weighing in percent: Reference weight
Weighing in percent: Reference percentage
Animal weighing: No. of measurements remaining
Animal weighing: Calculated average
Data Input Format
You can connect a computer to your balance to send commands via the balance interface
port to control balance functions and applications.
The commands sent are control commands and may have different formats.
Each character must be transmitted according to the settings configured in the operating
menu for data transmission.
Format for Control Commands
Format 1: Esc
!
CR
Format 2: Esc
!
#
Esc: Escape
!: Command
character
LF
_
CR
CR: Carriage return (optional)
LF: Line feed (optional)
LF
! #: Letters (characters) and numbers
_: Underline
Command character
!
K
L
M
N
O
P
R
S
T
Z
Format 1:
Meaning
Weighing mode 1 (very stable conditions)
Weighing mode 2 (stable conditions)
Weighing mode 3 (unstable conditions)
Weighing mode 4 (very unstable conditions)
Block keys
(A) key (print, auto print; activate or block)
Unblock keys
Restart/self-test
(TARE) key
Internal calibration/adjustment
Command character
!#
f0
f1
s3
x0
x1
x2
Format 2:
Meaning
Function key (F)
Function key (CAL)
(CF) key
Perform internal calibration
Print balance mode
Print weigh cell serial number
59
Synchronization
Handshake
During data communication between the
balance and a connected device (computer),
messages consisting of ASCII characters are
transmitted via the interface. For error-free
data communication, the parameters for
baud rate, parity, handshake mode and
character format must be the same for both
units.
The balance interface (Sartorius Balance
Interface = SBI) has transmit and receive
buffers. You can define the handshake
parameter in the Setup menu:
You can set these parameters in the
Setup menu so that they match those of
the connected device. You can also define
parameters in the balance to make data
output dependent on various conditions.
The conditions that can be configured are
listed in the descriptions of the application
programs.
If you do not connect a peripheral device
to the balance interface port, this will not
generate an error message.
60
– Hardware handshake (CTS/DTR)
– Software handshake (XON, XOFF)
Hardware Handshake
With a 4-wire interface, 1 more
character can be transmitted after CTS
(Clear to Send).
The software handshake is controlled via
XON and XOFF. When a device is switched
on, XON must be transmitted to enable
any connected device to communicate.
If you select the auto print setting, data
will be transmitted immediately the
moment you turn on the balance. In the
operating menu, you can define whether
automatic printing can be stopped by
pressing (A).
Data Output by Print Command
Faster Output Speeds
The print command can be transmitted
by pressing (A) or by a software command
(Esc P).
If you require output speeds faster
than 10 Hz, please contact Sartorius for
information.
Software Handshake
Automatic Data Output
In the “auto print" operating mode, data
is output to the interface port without
a print command. You can have data output automatically at defined print intervals,
with or without the stability parameter.
The length of a print interval depends on
the settings for “Adapting the filter"
(1 1 x) and “Time-dependent automatic
printing" (6 3 x).
61
Pin Assignment Charts
Female Interface Connector:
25-contact D-Submini (DB25S) with screw lock hardware
Male connector used (please use connectors with the same specifications):
25-pin D-Submini DB25S with integrated shielded cable clamp assembly
(Amp 826 985-1C) and fastening screws (Amp 164 868-1)
! Warning When Using Pre-wired RS-232 Connecting Cables:
RS-232 cables purchased from other manufacturers often have incorrect pin assignments
for use with Sartorius weighing systems. Be sure to check the pin assignments against
the chart below before connecting the cable, and disconnect any lines identified differently
from those specified by Sartorius (e.g., pin 6).
Failure to do so may damage or even completely ruin your weighing system and/or
peripheral device.
Pin Assignment Chart:
Pin 1: Signal ground
Pin 2: Data output (T+D)
Pin 3: Data input (R+D)
Pin 4: Internal ground (GND)
Pin 5: Clear to send (CTS)
Pin 6: Internally connected
Pin 7: Internal ground (GND)
Pin 8: Internal ground (GND)
Pin 9: Reset _ In*)
Pin 10: Not connected
Pin 11: + 12 V
Pin 12: Reset _ Out *)
For remote switch
Pin 13: + 5 V
Pin 14: Internal ground (GND)
Pin 15: Universal remote switch
Pin 16: Not connected
Pin 17: Not connected
Pin 18: Not connected
Pin 19: Not connected
Pin 20: Data terminal ready (DTR)
Pin 21: Ground input for external voltage supply
Pin 22: Not connected
Pin 23: Not connected
Pin 24: Ext. supply voltage input +12 to 30 V
Pin 25: +5 V
*) = Hardware restart
62
Cabling Diagram
– For connecting a computer or other peripheral device to the balance using the
RS-232C/V24 protocol and cables up to 15 m (50 ft.) long.
V24
Balance (female connector)
7
1
Peripheral device
(male connector)
PC
PC
25-pin
or
9-pin
2
3
20
4
3
2
5
8
6
6
7
5
Cable type: AWG 24 specification
63
Troubleshooting Guide
Error codes are shown on the main display for 2 seconds. The program then returns
automatically to the previous mode (e.g., weighing).
Display
No segments appear
on the display
h
l or Err 54
err 01
err 02
err 10
err 11
err 22
err 30
err 235
on CPA26P,
CPA225D
64
Cause
No AC power is available
Solution
Check the AC power supply
The power supply is not
plugged in
The load exceeds the balance
capacity
Something is touching
the weighing pan
CPA2P-F model:
calibration/adjustment not
possible without cover
Plug in the power supply
Display overrun (data output
incompatible with output format
Calibration parameter
not met; e.g.:
– balance not zeroed
– load on weighing pan
The tare keys are blocked
when there is data in the
second tare memory (nettotal); only 1 tare function
can be used at a time
Tare memory not allowed
Weight is too light or,
when using an application
program, there is no sample
on the balance
Interface port for printer
output is blocked
Connecting cable not
correctly plugged in
Electronics unit of
a different balance used
Unload the balance
Move the object that is
touching the weighing pan
To calibrate/adjust, position either
the standard pan (8 g) or the
filter pan (5 g) along with the
cover (3 g)
Change the configuration in
the operating menu
Calibrate only when zero
is displayed
– Press (TARE) to zero the balance
– Unload the balance
Press (CF) to clear the tare
memory and release the tare keys
Press (TARE)
Increase the weight on the
balance
Reset the menu factory settings,
or
Contact your local Sartorius
Service Center
Plug in the cable correctly
Connect the units that belong
to one another
Display
The weight readout
changes constantly
The weight readout
is obviously wrong
Cause
Unstable ambient conditions
(excessive vibration or draft)
at the place of installation
Solution
Set up the balance
in another area
A foreign object is caught between
weighing pan and balance housing
The balance was not calibrated/
adjusted before weighing
The balance was not zeroed
before weighing
Remove the foreign object
Calibrate/adjust the balance
Zero the balance before
weighing
If any other errors occur, contact your local Sartorius Service Center!
Contact information: Please point your Internet browser to: http://www.sartorius.com
Preparing CPA2P.. Models
for Transport
Model CPA2P:
§ Remove the weighing pan
§ Remove the interior draft shield from the chamber:
Use your fingers to raise the draft shield carefully
until it is free
$ Place these parts in the accessory kit
§ Fasten the chamber doors by placing a rubber band
around the door handles.
Model CPA2P-F:
§ Remove the filter pan cover from the chamber
§ Use forceps to remove the filter weighing pan
carefully from the chamber
§ Remove the interior draft shield from the chamber:
Use your fingers to raise the draft shield carefully
until it is free
$ Place these parts either in the accessory kit or in
the original packaging
The balance/scale must be acclimated again any
time it is set up in a new location (see “Installation”
chapter).
65
Care and Maintenance
Service
On request, Sartorius can offer you an
individual service contract.
Repairs
Repair work must be performed by
trained service technicians. Any attempt
by untrained persons to perform repairs
may lead to hazards for the user.
Caution
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
Cleaning
§ Unplug the AC adapter from the wall
outlet (mains supply). If you have an
interface cable connected to the
balance port, unplug it from the port.
§ Clean the balance using a piece of
cloth which has been wet with a mild
detergent (soap).
§ After cleaning, wipe down the balance
with a soft, dry cloth.
! Make sure that no liquid or other
foreign objects or dust (powder) enters
the balance housing.
! Do not use any aggressive cleaning
agents (solvents or similar agents).
Cleaning Stainless Steel Surfaces
Clean all stainless steel parts regularly.
Remove the stainless steel weighing
pan and thoroughly clean it separately.
Use a damp cloth or sponge to clean
any stainless steel parts on the balance
by wiping them down. You can use
any commercially available household
cleaning agent that is suitable for use
on stainless steel. Then wipe down the
equipment to rinse thoroughly, making
sure to remove all residues. Afterwards,
allow the balance to dry. If desired, you
can apply oil to the cleaned surfaces as
additional protection.
Solvents are permitted for use only on
stainless steel parts.
66
Cleaning the Weighing Chamber and Draft Shield
§ Open the draft shield cover and take out the
removable parts.
§ Use a hand-held vacuum cleaner and mini-hose
to remove any powdered sample material carefully.
§ Use blotting paper to remove any liquid sample
material.
§ On models with a 3-sided draft shield, pull the
3 draft shield walls upwards to remove, if necessary.
Safety Inspection
If there is any indication that safe operation of the
balance is no longer warranted:
§ Turn off the power and disconnect the equipment
from AC power immediately.
> Lock the equipment in a secure place to ensure
that it cannot be used for the time being.
Notify your nearest Sartorius Service Center.
Repair work must be performed by trained service
technicians.
We recommend having the power supply inspected
by a certified electrician at regular intervals,
according to the checklist given below:
– Insulating resistance: > 7 megaohms measured
with a constant voltage of at least 500 volts at
a 500 K-ohm load
– Leakage current: < 0.05mA measured with
a properly calibrated multimeter
67
Instructions for Recycling
Information and Instructions on
Disposal and Repairs
Packaging that is no longer required
must be disposed of at the local waste
disposal facility. The packaging is made
of environmentally friendly materials
that can be used as secondary raw
materials.
The equipment, including
accessories and batteries,
does not belong in your
regular household waste.
The EU legislation requires
its Member States to collect
electrical and electronic equipment
and dispose of it separately from other
unsorted municipal waste with the
aim of recycling it.
In Germany and many other countries,
Sartorius AG takes care of the return
and legally compliant disposal of its
electrical and electronic equipment
on its own. These products may not
be placed in household waste or
brought to collection centers run by
local public disposal operations – not
even by small commercial operators.
For disposal in Germany and in the
other Member States of the European
Economic Area (EEA), please contact
our service technicians on location
or our Service Center in Goettingen,
Germany:
Sartorius AG
Service Center
Weender Landstrasse 94–108
37075 Goettingen, Germany
68
In countries that are not members of the
European Economic Area (EEA) or where
no Sartorius affiliates, subsidiaries, dealers
or distributors are located, please contact
your local authorities or a commercial
disposal operator.
Prior to disposal and/or scrapping of the
equipment, any batteries should be
removed and disposed of in local collection
boxes.
Sartorius AG, its affiliates, subsidiaries,
dealers and distributors will not take back
equipment contaminated with hazardous
materials (ABC contamination) – either
for repair or disposal. Please refer to the
accompanying leaflet/manual or visit our
Internet website (www.sartorius.com) for
comprehensive information that includes
our service addresses to contact if you
plan to send your equipment in for repairs
or proper disposal.
Overview
Specifications
Model
CPA2P
CPA2P-F
Electronic weighing range
mg
500/1,000/2,000
500/1,000/2,000
Weighing capacity
mg
approx. 2,000
approx. 2,000
Readability
mg
0.001/0.002/0.005
0.001/0.002/0.005
Tare range (subtractive)
mg
approx. –2,000
approx. –2,000
Repeatability (std. deviation)
< ±mg
0.001/0.002/0.003
0,002/0.003/0.004
Linearity
< ±mg
0.002/0.004/0.005
0.002/0.004/0.005
Response (average)
s
10
10
Operating temperature range
°C
+15 to +30°C (59°F to 86°F)
Allowable ambient
operating temperature
°C
+5 to +40°C (41°F to 104°F)
Sensitivity drift within
+15… +30°C
< ±/K
5 · 10–6
External calibration weight
(of at least accuracy class…)
g
2 (E2)
2 (E2)
Weighing pan diameter
mm
20 d
125 d or 20 d
Dimensions (W+D+H)
mm
213 +342+151
213+342+115
Weighing chamber (W+ D+H) mm
54+ 49,5+55,5
Height: 12
Net weight, approx.
kg
4.35
5.0
AC power source/
Power requirements
V~
AC adapter, 230 V or 115 V, +15%…–20%
(protection rating IP20)
Frequency
Hz
48 – 60
Power consumption (average) VA
maximum 16; typical 8
Approx. hours of operation
with the YRB08Z
rechargeable battery pack
22
h
22
Selectable weight units
Grams, carats, pounds, ounces, Troy ounces, Hong Kong taels,
Singapore taels, Taiwanese taels, grains, pennyweights, milligrams,
parts per pound, Chinese taels, mommes, Austrian carats, tola,
baht and mesghal
Built-in interface
Format:
Parity:
Transmission rates:
Handshake mode:
RS-232/V24-V28
7-bit ASCII, 1 start bit, 1 or 2 stop bits
Mark, odd, even or space
150 to 19,200 baud
Software or hardware
69
Model
CPA26P
CPA225D
CPA324S CPA224S CPA124S CPA64 CPA64-WDS
Weighing capacity
g
5/21
40/100/220
320
220
120
64
64
Readability
mg
0.002/0.01 0.01/0.01/0.1 0.1
0.1
0.1
0.1
0.1
Tare range (subtractive)
g
–21
–220
–120
–64
-64
Repeatability
(std. deviation)
<±mg 0.004
0.02/0.05/0.1 0.2
0.1
0.1
0.1
0.11)
Linearity
<±mg 0.008
0.03/0.1/0.2
0.3
0.2
0.2
0.2
0.21)
Response time (average)
s
10
< 6/3
<3
<2
<2
<2
< 21)
Operating temperature
range
°C
+10 to +30°C (50° to 86°F)
Allowable ambient
operating temperature
°C
+5 to +40°C (41°F to 104°F)
Sensitivity drift within
+10… +30°C
<±/K 1 ·10–6
–220
–320
External calibration weight g
(of at least accuracy class…)
20
(E2)
200 (E2)
200 +
100 (E2)
200 (E2)
100 (E2)
50 (E2) 50 (E2)
Net weight, approx.
kg
7.6
7.6
6.5
6.5
6.5
6.5
Pan size (inner diameter)*
mm
50 d
80 d
80 d
80 d
80 d
80 d
80 d
Pan area*
cm2
20
64
64
64
64
64
64
Weighing chamber height
(from pan to cover)
mm
162
232
232
232
232
232
–
Dimensions (W+D+H)
– Balance
mm
– Electronics box
mm
213+
213+342+340
342+270
134+51+155
–
AC power source/
Power requirements
V~
–
–
–
22
22
22
AC adapter, 230 V or 115 V, +15%…–20%
(protection rating IP20)
Frequency
Hz
48 – 60
Power consumption
(average)
VA
maximum 16; typical 8
Approx. hours of operation
with the YRB05Z
rechargeable battery pack h
213+342+92
213+342+340
–
4.1
20
20
22
22
Selectable weight units
Grams, carats, pounds, ounces, Troy ounces, Hong Kong taels,
Singapore taels, Taiwanese taels, grains, pennyweights, milligrams,
parts per pound, Chinese taels, mommes, Austrian carats, tola, baht and mesghal
Built-in interface
Format:
Parity:
Transmission rates:
Handshake mode:
RS-232/V24-V28
7-bit ASCII, 1 start bit, 1 or 2 stop bits
Mark, odd, even or space
150 to 19,200 baud
Software or hardware
* Three-sided weighing pan: d = diameter of inner circle.
The cross-hatched section can be fully utilized.
1)
These specifications were determined with the draft shield in place.
70
Model
Weighing capacity
ct
GCA1603P
GCA803S
GCA2502
800/1,600
800
2,500 (500 g)
0.01 1)
Readability
ct
0.001/0.01
0.001
Tare range (subtractive)
ct
–1,600
–800
–2,500
Repeatability (std. deviation)
<± ct
0.001/0.01
0.001
0.01
0.001
0.01
Linearity
<± ct
0.002
Response time (average)
s
<2
Operating temperature range °C
+10.… +30°C (50°F to 86°F)
Allowable ambient
operating temperature
°C
+5.… +40°C (41°F to 104°F)
Sensitivity drift within
+10… +30°C
<±/K
1 ·10–6
1 ·10–6
2 ·10–6
External calibration weight
(of at least accuracy class…)
g
200 +
100 (E2)
100 (E2)
200 (F1)
Net weight, approx.
kg
6.1
Pan size (inner diameter)*
mm
80 d
80 d
110 d
Pan surface*
cm2
64
64
120
Weighing chamber height
(from pan to cover)
mm
162
Dimensions (W+D+H)
mm
213+342+270
AC power source/
Power requirements
V~
AC adapter, 230 V or 115 V, +15%…–20%
(protection rating IP20)
Frequency
Hz
Power consumption (average) VA
Approx. hours of operation
with the YRB08Z
rechargeable battery pack
h
48 – 60
maximum 16; typical 8
22
22
27
Selectable weight units
Grams, carats, pounds, ounces, Troy ounces, Hong Kong taels,
Singapore taels, Taiwanese taels, grains, pennyweights, milligrams,
parts per pound, Chinese taels, mommes, Austrian carats, tola,
baht and mesghal
Built-in interface
Format:
Parity:
Transmission rates:
Handshake mode:
RS-232/V24-V28
7-bit ASCII, 1 start bit, 1 or 2 stop bits
Mark, odd, even or space
150 to 19,200 baud
Software or hardware
1)
For readability 0.005 ct, select menu code 1 8 1 or 3 2 1 (see “Configuring the Balance/Scale”)
* Three-sided weighing pan: d = diameter of inner circle.
The cross-hatched section can be fully utilized.
71
Model
CPA1003S
CPA1003P
CPA623S CPA423S, CPA323S CPA223S
CPA423S-DS
Weighing capacity
g
1,000
500/1,010
620
420
320
220
Readability
g
0.001
0.001/0.01
0.001
0.001
0.001
0.001
Tare range (subtractive)
g
–1,000
–1,010
–620
–420
–320
–220
Repeatability
(std. deviation)
<± g
0.001
0.001/0.01
0.001
0.001
0.001
0.001
Linearity
<± g
0.002
0.002/0.02
0.002
0.002
0.002
0.002
Response time (average)
s
<2
<2
< 1.5
< 1.5
< 1.5
< 1.5
Operating temperature range
°C
10° to 30° (50° to 86°F)
Allowable ambient
operating temperature
°C
0° to 40° (32° to 104°F)
Sensitivity drift
within +10 to +30°C
<±/K
2 ·10–6
External calibration weight
(of at least accuracy class…)
g
1,000 (E2)
1,000 (E2)
500 (E2)
200 (F1)
200 (F1)
200 (F1)
Net weight, approx.
kg
6.5
6.5
4.6
4.6
4.6
4.6
Weighing pan size
(inner diameter)*
Weighing pan area*
mm
110 d
cm2
120
Weighing chamber height
(weighing pan to draft shield
cover)
mm
240
240
50
50
50
50
Dimensions (W+D+H)
mm
213+342+340
213+
342+153
213+342+153
CPA423S-DS:
213+342+340
AC power source/
power requirements
V~
AC adapter STNG6, 230 V or 115 V,
+15% to – 20% (protection rating IP20)
Frequency
Hz
48 – 60
Power consumption (average)
VA
maximum 16; typical 8
Approx. hours of operation
with the YRB05Z
rechargeable battery pack
h
27
Selectable weight units
Grams, carats, pounds, ounces, Troy ounces,
Hong Kong taels, Singapore taels, Taiwanese taels, grains, pennyweights,
milligrams, parts per pound, Chinese taels, mommes, Austrian carats,
tola, baht and mesghal
Built-in interface
RS-232C-S/V24-V28; 7-bit; parity: even, odd, mark,
or space; transmission rates: 150 to 19,200 baud;
1 or 2 stop bits; software/hardware handshake
* Three-sided weighing pan: d = diameter of inner circle.
The cross-hatched section can be fully utilized.
72
Model
CPA6202S CPA6202P GPA5202/
CPA4202S CPA3202S/ CPA2202S/
CPA5202S-DS
GPA3202 CPA2202S-DS
Weighing capacity
g
6,200
1,500/
5,200
3,000/6,200
4,200
3,200
2,200
Readability
g
0.01
0.01/0.02/ 0.01
0.05
0.01
0.01
0.01
Tare range (subtractive)
g
–6,200
–6,200
–5,200
–4,200
–3,200
–2,200
Repeatability
(std. deviation)
<± g 0.01
01/0.01/
0.03
0.01
0.01
0.01
0.01
Linearity
<± g 0.02
0.02/0.02/ 0.02
0.05
0.02
0.02
0.02
Response time (average)
s
< 1.5
Operating temperature range
°C
10° to 30° (50° to 86°F)
Allowable ambient
operating temperature
°C
0° to 40° (32° to 104°F)
Sensitivity drift
within +10 to +30°C
<±/K 2 ·10–6
External calibration weight
(of at least accuracy class...)
g
5,000 (E2)
5,000 (F1) 5,000 (E2)
2,000 (E2) 2,000 (F1)
2,000 (F1)
Net weight, approx.
kg
4.7
4.7
6
4.7
4.7
4.7/6
Weighing pan size
mm
190+204
190+204
190+204
190+204
Weighing pan area
cm2
388
388
190+204/
d 130
388/133
388
388
190+204/
d 130
388/133
Dimensions (W+D+H)
mm
213+
342+
88
213+
342+
88
213+
342+
88/340
213+
342+
88
213+
342+
88
213+
342+
88/340
AC power source/
power requirements
V~
AC adapter STNG6, 230 V or 115 V,
+15% to – 20% (protection rating IP20)
Frequency
Hz
Power consumption (average) VA
Approx. hours of operation
with the YRB05Z
rechargeable battery pack
h
48 – 60
maximum 16; typical 8
27
Selectable weight units
Grams, kilograms, carats, pounds, ounces, Troy ounces,
Hong Kong taels, Singapore taels, Taiwanese taels, grains,
pennyweights, milligrams, parts per pound, Chinese taels, mommes,
Austrian carats, tola, baht and mesghal
Built-in interface
RS-232C-S/V24-V28; 7-bit; parity: even, odd, mark, or space;
transmission rates: 150 to 19,200 baud;
1 or 2 stop bits; software/hardware handshake
73
Model
CPA
10001
CPA
8201
CPA
5201
CPA
CPA
34001S 34001P
CPA
16001S
CPA
12001S
CPA
34000
34
Weighing capacity
kg
10
8.2
5.2
34
8/16/34
16
12
Readability (scale interval)
g
0.1
0.1
0.1
0.1
0.1/0.2/0.5 0.1
0.1
1
Tare range (subtractive)
kg
–10
–8.2
–5.2
–34
–34
–16
–12
–34
Repeatability
(std. deviation)
<±g 0.1
0.1
0.1
0.1
0.1/0.2/0.5 0.1
0.1
0.5
Linearity
<±g 0.2
0.2
0.2
0.2
0.3/0.3/0.3 0.2
0.2
1
Response time (average)
s
<1
<1
<1
<2
<2
<2
<2
< 1.5
2 · 10–6
2 · 10–6
2 · 10–6
Operating temperature range °C
10° to 30° (50° to 86°F)
Allowable ambient
operating temperature
°C
0° to 40° (32° to 104°F)
Sensitivity drift
within 10° to 30°C
<±/K 4 · 10–6 4 · 10–6 4 · 10–6 2 · 10–6 2 · 10–6
External calibration weight kg
(of at least accuracy class...)
5 (F1)
5 (F2)
5 (F2)
10 (F1)
10 (F2)
10 (F1)
10 (F1)
10 (F2)
Net weight, approx.
kg
4.7
4.7
4.7
16
16
16
16
16
Weighing pan size
mm 190+204 190+204 300+400
300+400
300+400 300+400 300+400
Dimensions (W+D+H)
mm 213 +
342+
90
313+
532+
120
313+
532+
120
313+
532+
120
313+
532+
120
AC power source/
power requirements
V~
Frequency
Hz
22
22
22
Power consumption (average) VA
Approx. hours of operation
with a rechargeable
battery pack
h
Selectable weight units
Cable length between display
unit/weighing platform
m
Built-in interface
213+
342+
90
213+
342+
90
313+
532+
120
AC adapter STNG6, 230 V or 115 V,
+15% to – 20% (protection rating IP20)
48 – 60
maximum 16; typical 8
40
40
40
22
–
–
–
1.2
1.2
1.2
RS-232C-S/V24-V28; 7-bit; parity: even, odd, mark, or space;
transmission rates: 150 to 19,200 baud; 1 or 2 stop bits;
software/hardware handshake
* Three-sided weighing pan: d = diameter of inner circle.
The cross-hatched section can be fully utilized.
74
22
Grams, kilograms, carats, pounds, ounces, Troy ounces,
Hong Kong taels, Singapore taels, Taiwanese taels, grains,
pennyweights, milligrams, parts per pound, Chinese taels, mommes,
Austrian carats, tola, baht and mesghal
1.2
1.2
Model
CPA26P
-0CE
CPA225D
-0CE
CPA324S
-0CE
CPA224S
-0CE,
CPA224
-PCE
CPA124S
-0CE,
CPA124S
-PCE
CPA64
-0CE
Type
BC BL 100 BC BL 100 BC BL 100
BC BL 100
BC BL 100
BC BL 100
Accuracy class1)
k
k
k
k
k
k
Maximum capacity, Max1)
g
5/21
100/220
320
220
120
64
Scale interval d1)
mg
0.002/0.01 0.01/0.1
0.1
0.1
0.1
0.1
Tare range (subtractive)
g
< 100% of the maximum capacity
0.001
Verification scale interval, e1)
g
0.001
0.001
0.001
0.001
0.001
Minimum capacity, Min1)
g
0.0002
0.001
0.01
0.01
0.01
0.01
Response time (average)
s
10
< 6/3
<3
<2
<2
<2
Range of use according to CD1)
g
0.0002–21 0.001–220 0.01-320
0.01–220
0.01–120
0.01–64
Allowable ambient operating
temperature:
– with “isoCAL” function
– without “isoCAL” function
°C
°C
+10° to +30° (+50° to +86°F)
+15° to +25° (+59° to +77°F)
External calibration weight
(of at least accuracy class…)
g
20 (E2)
200 (E2)
200 +
100 (E2)
200 (E2)
100 (E2)
50 (E2)
Net weight, approx.
kg
7.6
7.6
6.5
6.5
6.5
6.5
Weighing pan size
(inner diameter)
Weighing pan area
mm 50 d
80 d*
80 d*
80 d*
80 d*
80 d*
cm2
64*
64*
64*
64*
64*
232
232
232
232
232
213+ 342
+ 340
134+ 51
+155
213+ 342
+ 340
–
213+342
+340
–
213+ 342
+ 340
–
213+ 342
+340
–
22
22
22
20
Weighing chamber height (weighing pan to draft shield cover)
mm 162
Dimensions (W+D+H)
– Balance
– Electronics box
AC power source/
power requirements
mm 213+ 342
+ 270
mm 134 + 51
+155
V~
AC adapter STNG6, 230 V or 115 V,
+15%…– 20% (protection rating IP20)
Frequency
Hz
48 – 60
Power consumption (average)
VA
maximum 16; typical 8
Approx. hours of operation
with the YRB05Z reachargeable
battery pack
h
20
20
22
Selectable weight units
Grams, carats, milligrams
Built-in interface
RS-232C-S/V24-V28; 7-bit; parity: even, odd, mark, or space; transmission
rates: 150 to19,200 baud; 1 or 2 stop bits; software/hardware handshake
1)
CD= Council Directive 90/384/ECC for non-automatic weighing instruments;
applicable to the European Economic Area
* Three-sided weighing pan: d = diameter of inner circle.
The cross-hatched section can be fully utilized.
75
Model
CPA1003S-0CE
CPA623S-0CE
CPA523S-PCE
CPA423S-0CE
Type
BD BL 100
BD BL 200
BD BL 200
BD BL 200
Accuracy class1)
Maximum capacity, Max1)
g
k
K
K
K
1,000
620
520
420
0.001
0.001
0.001
Scale interval, d1)
g
0.001
Tare range (subtractive)
g
< 100% of the maximum capacity
Verification scale interval, e1) g
0.01
0.01
0.01
0.01
Minimum capacity, Min1)
g
0.1
0.02
0.02
0.02
Response time (average)
s
< 1.5
Range of use according
to CD1)
g
0.1–1,000
0.02–620
0.02–520
0.02–420
+10 to +40°C
(+50° to +104°F)
+15 to +25°C
(+50° to +77°F)
+0° to +40°C
(+32° to +104°F)
+10° to +30°C
(+50° to +86°F)
+0° to +40°C
(+32° to +104°F)
+10° to +30°C
(+50° to +86°F)
+0° to +40°C
(+32° to +104°F)
+10° to +30°C
(+50° to +86°F)
4.6
4.6
4.6
Allowable ambient operating
temperature:
– with “isoCAL” function
– without “isoCAL” function
Net weight, approx.
kg
6.5
Weighing pan size
(inner diameter)*
Weighing pan surface*
mm
110 d
cm2
120
Weighing chamber height
(weighing pan to draft shield
cover)
mm
240
50
50
50
Dimensions (W+D+H)
mm
213+342+340
213+342+153
213+342+153
213+342+153
AC power source/
power requirements
V~
AC adapter STNG6 230 V or 115 V,
+15% to – 20% (protection rating IP20)
Frequency
Hz
Power consumption (average) VA
48 – 60
maximum 16; typical 8
Approx. hours of operation
with the YRB05Z reachargeable
battery pack
h
27
Selectable weight units
Grams, carats
Built-in interface
RS-232C-S/V24-V28; 7-bit; parity: even, odd, mark,
or space; transmission rates: 150 to19,200 baud;
1 or 2 stop bits; software/hardware handshake
1)
CD= Council Directive 90/384/ECC for non-automatic weighing instruments;
applicable to the European Economic Area
* Three-sided weighing pan: d = diameter of inner circle.
The cross-hatched section can be fully utilized.
76
Model
CPA323S-0CE
CPA223S-0CE
GC1603S-0CE
GC803S-0CE
Type
BD BL 200
BD BL 200
BC BL 100
BC BL 100
Accuracy class1)
K
K
k
k
Maximum capacity, Max1)
320 g
220 g
1,600 ct
800 ct
Scale interval, d1)
0.001 g
0.001 g
0.001 ct
0.001 ct
Tare range (subtractive)
< 100% of the maximum capacity
Verification scale interval, e1)
0.01 g
0.01 g
10 mct
10 mct
Minimum capacity, Min1)
0.02 g
0.02 g
0.1 ct
0.1 ct
Response time (average)
s
Range of use according
to CD1)
Allowable ambient operating
temperature:
– with “isoCAL” function
°C
– without “isoCAL” function °C
< 1.5
< 1.5
<2
<2
0.02–320 g
0.02–220 g
0.1–1,600 ct
0.1–800 ct
+0° to +40° (+32° to +104°F)
+10° to +30° (+50° to +86°F)
External calibration weight
(of at least accuracy class)
g
Net weight, approx.
kg
4.6
Weighing pan size
(inner diameter)*
Weighing pan area*
mm
110 d
cm2
+10° to +30° (+50° to +86°F)
+15 to +25 (59°F to 77°F)
200 +
100 (E2)
100 (E2)
4.6
6.1
6.1
110 d
80 d
80 d
64
64
120
120
Weighing chamber height
(weighing pan to draft shield
cover)
mm
50
50
162
162
Dimensions (W+D+H)
mm
213+342+153
213+342+153
213+342+270
213+342+270
AC power source/
power requirements
V~
AC adapter STNG6 230 V or 115 V,
+15% to –20% (protection rating IP20)
Frequency
Hz
48 – 60
Power consumption (average) VA
maximum 16; typical 8
Approx. hours of operation
with the YRB05Z reachargeable
battery pack
h
27
Selectable weight units
Grams, carats
Built-in interface
RS-232C-S/V24-V28; 7-bit; parity: even, odd, mark,
or space; transmission rates: 150 to19,200 baud;
1 or 2 stop bits; software/hardware handshake
1)
27
22
22
Grams, milligrams, carats
CD= Council Directive 90/384/ECC for non-automatic weighing instruments;
applicable to the European Economic Area
* Three-sided weighing pan: d = diameter of inner circle.
The cross-hatched section can be fully utilized.
77
Model
CPA6202S
-0CE
CPA6202P
-0CE
GPA5202
-0CE
CPA4202S
-0CE,
CPA4202S
-PCE
CPA3202S
-0CE,
CPA3202S
-PCE,
GPA3202
-0CE
CPA2202S
-0CE
Type
BD BL 200
BD BL 200
BD BL 200 BD BL 200
BD BL 200
BD BL 200
Accuracy class1)
K
K
K
K
K
K
Maximum capacity, Max1)
g
6,200
1,500/3,000/ 5,200
6,200
4,200
3,200
2,200
Scale interval, d1)
g
0.01
0.01/0.02/
0.05
0.01
0.01
0.01
Tare range (subtractive)
g
0.01
< 100% of the maximum capacity
Verification scale interval, e1) g
0.1
0.1
0.1
0.1
0.1
0.1
Minimum capacity, Min1)
g
0.5
0.5
0.5
0.5
0.5
0.5
Response time (average)
s
< 1.5
Range of use according
to CD1)
g
0.5–6,200
0.5–6,200
0.5–5,200
0.5–4,200
0.5–3,200
0.5–2,200
Allowable ambient operating
temperature:
– with “isoCAL” function
°C
– without “isoCAL” function °C
+0° to +40° (+32° to +104°F)
+10° to +30° (+50° to +86°F)
Net weight, approx.
kg
4.7
Weighing pan size
Weighing pan area*
mm
cm2
190+204
388
Dimensions (W+D+H)
mm
213+342+88
AC power source/
power requirements
V~
AC adapter STNG6 230 V or 115 V,
+15% to – 20% (protection rating IP20)
Frequency
Hz
48 – 60
Power consumption (average) VA
maximum 16; typical 8
Approx. hours of operation
with the YRB05Z reachargeable
battery pack
h
27
Selectable weight units
Grams, kilograms, carats
Built-in interface
RS-232C-S/V24-V28; 7-bit; parity: even, odd, mark,
or space; transmission rates: 150 to19,200 baud;
1 or 2 stop bits; software/hardware handshake
1)
CD= Council Directive 90/384/ECC for non-automatic weighing instruments;
applicable to the European Economic Area
78
Model
CPA10001-0CE
CPA8201-0CE
CPA5201-0CE
CPA2201-0CE
Type
BD BL 200
BD BL 200
BD BL 200
BD BL 200
K
K
K
K
Maximum capacity, Max1)
g
10,000
8,200
5,200
2,200
Scale interval, d1)
g
0.1
0.1
0.1
0.1
Tare range (subtractive)
g
< 100% of the maximum capacity
Accuracy class1)
Verification scale interval, e1) g
1
1
1
0.1
Minimum capacity, Min1)
g
5
5
5
5
Response time (average)
s
<1
Range of use according
to CD1)
g
5–10,000
5–8,200
5–5,200
5–2,200
Allowable ambient operating
temperature:
– with “isoCAL” function
°C
– without “isoCAL” function °C
0° to +40° (+32° to +104°F)
+10° to +30° (+50° to +86°F)
Net weight, approx.
kg
4.7
Weighing pan size
Weighing pan area*
mm
cm2
190+ 204
388
190 + 204
388
Dimensions (W+D+H)
mm
213+ 342+ 90
213 + 342+ 90
AC power source/
power requirements
V~
AC adapter STNG6 230 V or 115 V,
+15% to – 20% (protection rating IP20)
Frequency
Hz
48 – 60
Power consumption (average) VA
maximum 16; typical 8
Approx. hours of operation
with the YRB05Z
reachargeable battery pack
40
h
Selectable weight units
Grams, kilograms, carats
Built-in interface
RS-232C-S/V24-V28; 7-bit; parity: even, odd, mark, or space;
transmission rates: 150 to19,200 baud;
1 or 2 stop bits; software/hardware handshake
1)
CD= Council Directive 90/384/ECC for non-automatic weighing instruments;
applicable to the European Economic Area
* Three-sided weighing pan: d = diameter of inner circle.
The cross-hatched section can be fully utilized.
79
Model
CPA34001S
-0CE
CPA34001P
-0CE
CPA16001S
-0CE
CPA12001S
-0CE
CPA34000
-0CE
Type
BF BL 500
BF BL 500
BF BL 500
BF BL 500
BF BL 500
Accuracy class1)
K
K
K
K
K
kg
34
8/16/34
16
12
34
Scale interval, d1)
g
0.1
0.1/0.2/0.5
0.1
0.1
1
Tare range (subtractive)
g
< 100% of the maximum capacity
Maximum capacity, Max1)
Verification scale interval, e1)
g
1
1
1
1
1
Minimum capacity, Min1)
g
5
5
5
5
50
Response time (average)
s
<2
<2
<2
<2
< 1.5
Range of use according
to CD1)
g
5–34,000
5–34,000
5–16,000
5–12,000
50–34,000
Allowable ambient operating
temperature:
– with “isoCAL” function
– without “isoCAL” function
°C
°C
+0° to +40° (+32° to +104°F)
+10° to +30° (+50° to +86°F)
Net weight, approx.
kg
16
Weighing pan size
mm
300+400
Dimensions (W+D+H)
mm
313 +532+ 120
AC power source/
power requirements
V~
AC adapter STNG6, 230 V or 115 V,
+15% to –20% (protection rating IP20)
Frequency
Hz
48 – 60
Power consumption (average)
VA
maximum 16; typical 8
Approx. hours of operation
with the YRB06Z reachargeable
battery pack
h
220
Selectable weight units
Cable length between display
unit and weighing platform
Built-in interface
1)
Grams, kilograms, carats
1.20 m
RS-232C-S/V24-V28; 7-bit; parity: even, odd, mark, or space;
transmission rates: 150 to19,200 baud;
1 or 2 stop bits; software/hardware handshake
CD= Council Directive 90/384/ECC for non-automatic weighing instruments;
applicable to the European Economic Area
80
Accessories (Options)
Product
Order No.
Data printer
with date, time, statistics evaluation
and transaction counter functions
and LCD
YDP03-0CE
Remote display1) reflective
(data interface required)
YRD02Z
External rechargeable battery pack
– for models with weighing capacities
under 10 kg
YRB05Z
– for models with weighing capacities
over 10 kg
YRB06Z
With battery-level indicator (LED);
can be recharged using the AC adapter
(time it takes to charge the discharged
battery pack: 15 hours); see
“Specifications" for hours of operation
To recharge the battery pack:
– Unplug the AC adapter from the balance
and plug it into the battery pack
Carrying case
– for models with analytical
draft shield chamber
– for models with weighing capacities
up to 10 kg and without analytical
draft shield chamber
1)
Not available for verified balances
YDB01CP
YDB02CP
81
Product
SartoConnect,1) software for direct transfer of weighing data
to an application program (e.g. Excel) from the CPA balance to
a computer
– with RS-232C adapter cable; length: 1 m
– with RS-232C adapter cable; length: 5 m
– with RS-232C adapter cable; length: 15 m
Order No.
YSC01L
YSC01L
YSC01L5
YSC01L15
Density determination kit1)
– for CPA225D, CPA324S, CPA224S, CPA124S
YDK01
Antistatic weighing pan1)
– for CPA225D, CPA324S, CPA224S, CPA124S, CPA64
YWP01CP
Calibration weights
for all CPA balances; extensive assortment, optionally available
with DKD certificate
Standard Operating Procedure
optimum use of your balance in quality management systems
Information
available
on request
YSL07E
Industrial AC adapter, model ING1
for balances with weighing capacities up to 10 kg; protection rating:
IP65 in accordance with DIN VDE 0470/DIN EN 60529
– for 230 V
– for 120 V
69 71476
69 71480
Industrial AC adapter, model ING2
for balances with weighing capacities over 10 kg; protection rating:
IP65 in accordance with DIN VDE 0470/DIN EN 60529
– for 230 V
– for 120 V
69 71899
69 71500
Analytical draft shield chamber
– for CPA623S, CPA423S, CPA323S, CPA223S, GCA2502
YDS01CP
1)
82
Not available for verified balances
Product
Order No.
Draft shield cover with opening (d 30 mm)
– for CPA623S, CPA423S, CPA323S, CPA223S, GCA2502
YDS02CP
Data cable
– for PC connection, 25-pin
– for PC connection, 9-pin
7357312
7357314
Adapter:
D-Sub 25-pin male connector to D-Sub 9-position, length: 0.25 m
6965619
Universal remote control switch
for remote control of the following functions
(configured in the balance menu): (A), (TARE), (CF) or (F)
(see “Configuration" for details):
Foot switch with T-connector
Hand switch with T-connector
YFS01
YHS02
T-connector
YTC01
! The T-connector is not intended for use with multiple intelligent
peripheral devices, such as PCs or YDP03-0CE printers.
Hanger for below-balance weighing1)
– for models CPA34001S, CPA34001P, CPA16001S,
CPA12001S, CPA34000
69EA0040
Weighing bowl, nickel chromium steel, with pouring spout;
– Weighing capacity: >300 g; volume: 1,000 ml
– volume 500 ml
– volume 3,000 ml
641211
641212
641213
Dust cover
– for display unit on models CPA34001S, CPA16001S, CPA34001P,
CPA12001S, CPA34000
– for models CPA623S, CPA323S, CPA423S, CPA223S
– for models CPA6202S, CPA4202S, CPA2202S, CPA6202P, CPA10001,
CPA8201, CPA5201, CPA2201-0CE
– for display and control unit on models CPA225D, CPA324S, CPA224S,
CPA1003S, CPA1003P, CPA…-DS, CPA124, CPA64
1)
6960CP01
6960CP02
6960CP03
6960CP04
Not available for verified balances
83
Declaration of Conformity
Weighing Instruments for Use in
Legal Metrology:
Council Directive 90/384/EEC
“Non-automatic weighing instruments”
This Directive regulates the determination
of mass in legal metrology.
For the respective Declaration of Type
Conformity for weighing instruments that
have been verified by Sartorius for use as
legal measuring instruments and that have
an EC Type-Approval Certificate, see the
page after next.
This Directive also regulates the
performance of the EC verification by the
manufacturer, provided that an EC TypeApproval Certificate has been issued and
the manufacturer has been accredited
by an officer of a Notified Body registered
at the Commission of the European Community for performing such verification.
Sartorius complies with EC Directive
No. 90/384/EEC for non-automatic weighing instruments, which has been in effect
since January 1, 1993, within the Single
European Market, as well as the accreditation of the Quality Management System of
Sartorius AG by Lower Saxony’s Regional
Administrative Department of Legal Metrology (Niedersächsisches Landesverwaltungsamt – Eichwesen) on February 15,
1993.
For additional information on the C mark
on Sartorius equipment, see Sartorius
Publication No. W--0052-e93081.
“New Installation“ Service
Initial verification is covered in our “New
Installation” service package. In addition
to initial verification, this package provides
you with a series of important services
which will guarantee you optimal results in
working with your weighing instrument:
– Installation
– Startup
– Inspection
– Training
– Initial verification
“EC Verification“ – A Service Offered
by Sartorius
Our service technicians authorized to
perform the verification* of your weighing
instruments that are acceptable for legal
metrological verification can inspect and
verify the metrological specifications at the
place of installation within the Member
States of the European Union and the
Signatories of the Agreement on the
European Economic Area.
Subsequent Verifications
within the European Countries
The validity of the verification will become
void in accordance with the national regulations of the country in which the weighing instrument is used. For information on
verification and legal regulations currently
applicable in your country, and to obtain
the names of the persons to contact, please
contact your local Sartorius office, dealer
or service center.
For more information on the verification of
weighing instruments for use in legal
metrology, contact the Sartorius Service
Center.
* = in accordance with the accreditation
certificate received by Sartorius AG
84
85
86
87
88
89
Sartorius AG
Weender Landstrasse 94–108
37075 Goettingen, Germany
Phone +49.551.308.0
Fax +49.551.308-3289
www.sartorius-mechatronics.com
Copyright by Sartorius AG,
Goettingen, Germany.
All rights reserved. No part
of this publication may
be reprinted or translated in
any form or by any means
without the prior written
permission of Sartorius AG.
The status of the information,
specifications and illustrations
in this manual is indicated
by the date given below.
Sartorius AG reserves the
right to make changes to the
technology, features,
specifications and design of the
equipment without notice.
Stand:
October 2008, Sartorius AG,
Goettingen, Germany
Printed in Germany on paper that has
been bleached without any use of chlorine.
W1A000 · KT
Publication No.: WCP6007-e08107