Advantech FPM-2150 Series User manual

User Manual
FPM-2120G/2150G/
2170G Series
12"SVGA/15" XGA/17" SXGA
Industrial LED Monitor with
Resistive Touchscreen, VGA
Display Port and DC12 V Input
Copyright
The documentation and the software included with this product are copyrighted 2013
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, which may result from its use.
Acknowledgements
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows® are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
This manual includes the following products:
FPM-2120G Series
FPM-2150G Series
FPM-2170G Series
Part No. 2003212010
Edition 1
Printed in China
January 2013
FPM-2120G/2150G/2170G Series User Manual
ii
Product Warranty (2 years)
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.
Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For outof-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandize
authorization) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a fully-completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid
to your dealer.
iii
FPM-2120G/2150G/2170G Series User Manual
Declaration of Conformity
FCC Class A
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Technical Support and Assistance
1.
2.
Visit the Advantech web site at www.advantech.com/support where you can find
the latest information about the product.
Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software,
etc.)
– A complete description of the problem
– The exact wording of any error messages
FPM-2120G/2150G/2170G Series User Manual
iv
Safety Instructions
1.
2.
3.
Read these safety instructions carefully.
Keep this User Manual for later reference.
Disconnect this equipment from any AC outlet before cleaning. Use a damp
cloth. Do not use liquid or spray detergents for cleaning.
4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. DO NOT COVER THE OPENINGS.
8. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage by transient overvoltage.
12. Never pour any liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following situations arises, get the equipment checked by service
personnel:
 The power cord or plug is damaged.
 Liquid has penetrated into the equipment.
 The equipment has been exposed to moisture.
 The equipment does not work well, or you cannot get it to work according to the
user's manual.
 The equipment has been dropped and damaged.
 The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. The sound pressure level at the operator's position according to IEC 704-1:1982
is no more than 70 dB (A).
DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
v
FPM-2120G/2150G/2170G Series User Manual
NOTE
Warning
If the customer user DC power by oneself for this product may cause
the radio interference in which case, the customer must be to take
adequate measures.
Warning
If the customer needs
adapter listed on the
adapter not listed on
interference in which
measures
to use power adapter, please use the power
product datasheet. If the customer use the power
the product datasheet, it may cause the radio
case, the customer must be to take adequate
FPM-2120G/2150G/2170G Series User Manual
vi
Contents
Chapter
1
General Information ............................1
1.1
1.2
Introduction ............................................................................................... 2
Specifications ............................................................................................ 2
1.2.1 General ......................................................................................... 2
1.2.2 Touchscreen (Optional) ................................................................ 2
LCD Specification...................................................................................... 3
Connectors................................................................................................ 3
Dimensions ............................................................................................... 4
Figure 1.1 FPM-2120G Dimensions ............................................ 4
Figure 1.2 FPM-2150G Dimensions ............................................ 5
Figure 1.3 FPM-2170G Dimensions ............................................ 6
1.3
1.4
1.5
Appendix A
Touchscreen ........................................7
A.1
A.2
A.3
Introduction ............................................................................................... 8
Touchscreen Specifications (12”/15”/17”) ................................................. 8
A.2.1 Typical Optical Features ............................................................... 8
A.2.2 Electrical Specifications ................................................................ 8
A.2.3 Environment Specifications........................................................... 8
Installing Driver for Windows OS .............................................................. 8
Appendix B
OSD Operation Keypad .......................9
B.1
OSD Board Overview.............................................................................. 10
B.1.1 OSD Button Description.............................................................. 10
Table B.1: OSD Button Description ........................................... 10
B.1.2 LED Function .............................................................................. 10
Table B.2: LED Function............................................................ 10
vii
FPM-2120G/2150G/2170G Series User Manual
FPM-2120G/2150G/2170G Series User Manual
viii
Chapter
1
1
General Information
Sections include:
 Introduction
 Specifications
 LCD Specification
 Power Consumption
 Connectors
 Dimensions
1.1 Introduction
Advantech's FPM-2120G/2150G/2170G is a 12"/15”/17” color TFT LED flat panel
monitor built specifically for industrial applications. With the optional touchscreen,
FPM-2120G/2150G/2170G is an excellent and user-friendly system control interface.
In addition to its usual application as an LED panel monitor,FPM-2120G/2150G/
2170G comes standard with direct VGA control signal inputs, making it compatible
with Industrial PCs and Workstations. Its OSD (On Screen Display) function allows
you to adjust display factors such as brightness, contrast, colors and VGA signal
information. Functions that are more and more critical as HMI users become aware
of the benefits of flat panel monitors. The whole chassis is of stainless steel, and the
front panel is of aluminum with NEMA4/IP65 compliance.
FPM-2120G/2150G/2170G also comes in a touch screen version (FPM-2120G-R/
FPM-2150G-R/FPM-2170G-R). With an 5-wire resistive type touchscreen, this
monitor can be immediately transformed into a remote control system. The
Advantech FPM-2120G/2150G/2170G is the ultimate HMI solution for your industrial
application.
1.2 Specifications
1.2.1 General
Specifications
FPM-2120G
FPM-2150G
FPM-2170G
Construction
Heavy-duty aluminum and steel chassis
Front panel
Aluminum, NEMA4 / IP65 Compliant
Control
OSD (On Screen Display) control pad on rear panel
Mounting
Panel, wall, desktop, VESA ARM or rack
Dimensions
(W x H x D)
311 mm x 237 mm x
40.63 mm (12.24'' x
9.33'' x 1.60'')
383 mm x 307 mm x
48.13 mm (15.08'' x
12.09'' x 1.89'')
413.72 mm x 347.22
mm x 52.13 mm (16.29''
x 13.67 x 2.05'')
Weight
4 kg (8.81 lbs)
6 kg (13.22 lbs)
8 kg (17.63 lbs)
1.2.2 Touchscreen (Optional)
Specifications
FPM-2120G
Type
5 wire, analog resistive
Resolution
2048*2048
Light
Transmission
80%
Controller
USB & RS-232 interface
FPM-2120G/2150G/2170G Series User Manual
FPM-2150G
2
FPM-2170G
Specifications
12” LCD
(LED Backlight)
15” LCD
(LED Backlight)
17” LCD
(LED Backlight)
Display Type
SVGA TFT LCD
XGA TFT LCD
SXGA TFT LCD
Display Size
12”
15”
17”
16.2 M
16.7 M
16.7 M
Max. Resolution
800 x 600
1280 x 1024
1280 x 1024
View Angle
(H/V°)
160°(V), 140°(H)
160°(V), 140°(H)
170°(V), 160°(H)
Luminance
450 cd/m2
400 cd/m2
350 cd/m2
Storage
Temperature
-30 ~ 85°C
-30 ~ 80°C
-30 ~ 85°C
Operating
Temperature
-30 ~ 85°C
-40 ~ 85°C
-30 ~ 85°C
Contrast Ratio
700:1 (Typical)
700:1 (Typical)
1000:1 (Typical)
Lamp Life Time
(MTBF)
50,000 hrs.
50,000 hrs.
50,000 hrs.
1.4 Connectors
The following connectors are situated on the bottom side of the FPM-2120G/2150G/
2170G series:
 VGA Port (DB-15)
This DB-15 connector can be connected to the system via the external 15-pin
DB-15 connector located on the left side of the system unit.
 RS-232 Touchscreen Connector (DB-9) (FPM-2120G/2150G/2170G-R)
This connector will be present only if a touchscreen is installed. It must be connected to the RS-232 port of the PC. The touchscreen cable is included with all
orders which include the touchscreen option.
 Touchscreen Connector (USB)
This connector will be present only if a touchscreen is installed. It must be connected to the USB port of the PC. The touchscreen cable is included with all
orders.
 DC 12 V Power Input Connector
This connector must be connected to DC 12 V power switch.
Warning! Please note before connect the monitor and PC with VGA cable:
1. If PC has installed operation system, please confirm its portrait frequency is within the acceptable range.
2. If PC has installed operation system, users need to adjust the portrait frequency to be within the acceptable range.
3
FPM-2120G/2150G/2170G Series User Manual
General Information
Max. Colors
Chapter 1
1.3 LCD Specification
1.5 Dimensions
Panel Cut-out Dimensions: 303.3x229.3mm (11.94"x9.03")
Unit:mm
Figure 1.1 FPM-2120G Dimensions
FPM-2120G/2150G/2170G Series User Manual
4
100.00 [3.94]
75.00 [2.95]
130.00 [5.12]
100.00 [3.94]
75.00 [2.95]
Unit: mm
121.70 [4.79]
Figure 1.2 FPM-2150G Dimensions
General Information
15.00 [0.59]
Chapter 1
48.13 [1.89]
18.50 [0.73]
4.50 [0.18]
FPM-2120G/2150G/2170G Series User Manual
5
372.60 [14.67]
308.26 [12.14]
270.59 [10.65]
383.00 [15.08]
214.10 [8.43]
296.60 [11.68]
Panel Cut-out Dimensions: 374.6 x 298.6 mm (14.75" x 11.75")
307.00 [12.09]
Figure 1.3 FPM-2170G Dimensions
Unit:mm
6
FPM-2120G/2150G/2170G Series User Manual
Panel Cut-out Dimensions: 400.92x334.42mm (15.78"x13.17")
Appendix
A
Touchscreen
A
A.1 Introduction
The FPM-2120G/2150G/2170G Series touchscreen uses advanced 5-wire resistive
technology. It provides more accurate sensing capacity than other technologies. The
touchscreen is specially designed for tough industrial environments, and has been
approved to FCC Class A standards.
A.2 Touchscreen Specifications (12”/15”/17”)
A.2.1 Typical Optical Features
Specification
12”
Light Transmission
> 80%
Haze
< 13%
15”
17”
A.2.2 Electrical Specifications
Specification
12”
Operation Voltage
5.5 V or below
Contact Current
70 mA (Maximum)
15”
17”
15”
17”
A.2.3 Environment Specifications
规格
12”
工作温度
-10 ~ +60°C
储存温度
-40 ~ +80°C
湿度
≥ 20°C, humidity < 80% RH
<20°C, humidity < 90% RH, Non-condensing
A.3 Installing Driver for Windows OS
The touchscreen has drivers for Win 2000/2003/Vista. You should read the
instructions in CD-ROM Disk carefully before you attempt installation. The FPM2120G/2150G/2170G-R series need to install Penmount 6000 driver. Please find
Penmount 6000 folder and install the driver into your system.
Note!
The driver manual are examples only. You must follow the flow chart
instructions and pay attention to the instructions which then appear on
your screen.
Note!
If there is any other OS driver need, you could download at the web
site: http://www.penmount.com.tw (Penmount 6000)
FPM-2120G/2150G/2170G Series User Manual
8
Appendix
B
OSD Operation
Keypad
B
B.1 OSD Board Overview
The OSD keypad, including six keys and a two color indicator, is designed as the
OSD operation interface.
Select/
Confirm
Auto Adjustment
Increase
rightness
Decrease
Brightnss
LED
Power ignal
Exit
B.1.1 OSD Button Description
Table B.1: OSD Button Description
Power
Turn the monitor power ON or OFF.
Exit
Exit menu.
Increase Brightness
Increase the monitor backlight brightness.
Decrease Brightness
Decrease the monitor backlight brightness.
Select/Confirm
Enter/confirm the selected option.
Auto Adjustment
Automatically adjust the monitor brightness.
B.1.2 LED Function
Table B.2: LED Function
ON
Green
StandBy/OFF
Green Blinking
No Signals
Orange
FPM-2120G/2150G/2170G Series User Manual
10
Appendix B OSD Operation Keypad
11
FPM-2120G/2150G/2170G Series User Manual
www.advantech.com
Please verify specifications before quoting. This guide is intended for reference
purposes only.
All product specifications are subject to change without notice.
No part of this publication may be reproduced in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission of the publisher.
All brand and product names are trademarks or registered trademarks of their
respective companies.
© Advantech Co., Ltd. 2013