IGNITION & ELECTRICAL
1
8.5 mm wire sets
2
IGNITION & ELECTRICAL
IGNITION & ELECTRICAL
3
universal 8.0mm Heli-core & 8.5mm
super conductor wire sets (8-cyl.)
Heli-core 8.0mm wires come with boots & terminals factory installed
on the spark plug end only. Each set includes a mini-stripper-crimper
for easy installation.
msd custom 8.5mm super conductor wire sets
With less than 50 ohms per foot, the 8.5mm wire is capable of delivering
30 times more spark energy to the plug over most OEM wires.
PART NO
DESCRIPTION
STYLE
YEAR
CHEVROLET
32159
Caprice, Impala SS, LT1 and V8
LT1
1994-96
32149
Camaro, LT1
LT1
1993-97
32179
Corvette, LT1
---
1992-96
32819
LS1 Vette, Camaro
LS1
1997-on
32829
LS1 Truck
LS1
1999-on
31649
GM F/S Truck, 4.3L, non-Vortech
w/HEI
1992-97
DESCRIPTION
8.5MM
Multi angle boots, HEI-type dist caps
31189
90° Plug boots HEI-type distributor caps
Multi angle boots w/HEI ends &
non-HEI ends
31229
31199
90° Plug boots w/HEI & non-HEI ends
31239
90˚ Plug Boots, Universal, L8/V8
31233
32839
Vortech, 4.3L
---
1996-02
31659
327, 350 Cars/Trucks (over valve covers)
Socket
1971-74
35659
327, 350 Cars/Trucks (over valve covers)
w/HEI
1971-74
31359
350, 400 Cars/Trucks (over valve covers)
w/HEI
1975-82
31769
All 350 Corvette (long wires below exhaust)
w/HEI
1975-82
31369
All 454 Chevy, GMC, Car/Trucks
w/HEI
1974-76
31779
All 366, 426, 454, Cars/Trucks
w/HEI
1977-87
race tailored wire sets
31379
All 366, 396, 427, 454, Car/Trucks
Socket
1969-74
35379
All 366, 396, 427, 454, Car/Trucks
w/HEI
1969-74
The MSD Race Tailored Heli-Core and 8.5mm Super Conductor
Wire Sets are designed specifically to fit race engines with headers.
31419
Truck 305, 350
w/HEI
1985-95
32169
GM Pickup, Vortech 350 5.7 L
---
1996-00
CHRYSLER
32749
318, 340, 360, Cars and Trucks (MSD dist)
HEI
all
32739
383, 400, 440, Cars and Trucks (MSD dist)
HEI
all
31329
302 (5.0L) Car/Trucks, Mustang
w/HEI
1977-93
32209
5.0L Mustang
w/HEI
1994-95
FORD
31329
255, 351W (5.8L) Cars/Trucks, Mustang
w/HEI
1977-93
31389
351C, 351W, 352, 390, 400, 429,460 Car
Socket
1965-76
35389
351C, 351W, 352, 390, 400, 429, 460 Car
HEI
1965-76
PART NO
31249
DESCRIPTION
All SB Chevy w/Low-Profile Distributor
STYLE
90
31299
All BB Chevy w/Low-Profile Distributor
90
35599
All SB Chevy w/HEI Style Distributor Cap
HEI
35609
All BB Chevy w/HEI Style Distributor Cap
HEI
4
®
IGNITION & ELECTRICAL
STREET FIRE
msd street fire wire sets
The Street Fire Spark Plug Wires feature a low resistance conductor that’s
wrapped in a sleek and durable black sleeve. The terminals are covered in
black boots that protect the conductor from engine heat to ensure spark
delivery.
• Helically wound conductor suppresses electro and radio noise
• Kevlar core combination for great strength and durability
• Heavy duty terminals for secure connection
• 8mm silicone and synthetic jacket resists heat and abrasion
• 500 Ohms per foot resistance for improved spark delivery and power
• Silicone boots protect against high exhaust temps
PART NO.
5554
5560
5562
5565
5566
5567
5573
DESCRIPTION
Small Block Chevy, 350 HEI
Chevy 454, ’74-’76 HEI
Chevy Truck 305-350, ’85-On
SBC, Socket Dist. Cap over VC
’75-’82, Corvette 305-350 HEI
Chevy 454, ’75-On HEI
GM Truck, Tahoe, Suburban, Vortech V8, ’96-’97
PART NO.
5540
5541
DESCRIPTION
Ford 351W, 400, 460, ’77-On HEI
Ford 302, 351W, HEI
universal
These kits are supplied only with the spark plug boot installed. This
way you can route the wires exactly as you’d like for a custom fit.
Terminals and boots are supplied for the distributor side that you install
with a special tool that is also supplied. All kits are for 8-cylinder.
replacement Boots & terminals
DESCRIPTION
Multi-Angle Boots and Terminals, 2/card
90° Spark Plug Boots and Terminals, 2/card
HEI Style 90° Boots and Terminals, 2/card
wiring diagrams/tecH notes cd-rom
CD-ROM (Adobe Acrobat PDF) covers all
current MSD components, showing how to
install them in various ignition systems &
engines. Tech info, specs, wiring tips, coil
applications, and troubleshooting featured.
DESCRIPTION
Each
PART NO.
9615
PART NO.
3301
3311
3320
PART NO.
DESCRIPTION
5551
Multi-Angle Plug, HEI Cap
5552
Multi-Angle, Socket/HEI
5553
90°, Plug/90° Plug
5554
90°, Socket/HEI Cap
socKet style Boot/terminal Kit
DESCRIPTION
PART NO.
Socket Style Boot/Terminal Kit,
8851
Set of 9
Boots & terminals
Sets of 100
DESCRIPTION
90˚ Plug style dual crimp
terminals
PART NO.
34615
IGNITION & ELECTRICAL
5
Boots & terminal set
Contains 9 boots & matching terminal.
8mm spiro pro
series HigH
performance
ignition wire set
DESCRIPTION
PART NO.
Short 90˚ boots & dual crimp terminals
8848
Spiro-Wound core when
RFI Suppression is
required for today’s
complex discharge
ignition systems.
Hei Boots for msd wire retainer
DESCRIPTION
HEI Distributor Boots, Set of 9
PART NO.
8849
sparK plug Boot/terminal Kit
DESCRIPTION
90˚ Boot/Terminal Kit, Set of 9
APPLICATIONS
CHEVROLET
SB over valve covers
PART NO.
8850
IGNITION PLUG
RED
HEI, 90˚
76228
8mm spiro-pro series HigH performance ignition wire sets
Provides up to 10 times the conductivity of standard resistor wire. Maximum fire power without radio interference. 100% silicone inner and outer jacket provides heat protection up to 600°F. Comes with double
spring locking plug terminals and pro boots. For street and track. Universal fit. Custom fit sets available in
red or blue.
DESCRIPTION
CYL
BLACK
RED
BLUE
YELLOW
PURPLE
HOT
ORANGE
HOT
LIME
90º Plug Boots
135º Plug Boots
180º Plug Boots
180º Hemi*
8
8
8
8
73051
73053
73055
75089
73251
73253
73255
73651
73653
73655
73451
73453
73455
73151
73153
78351
78353
78551
---
---
---
-----
-----
-------
Blue maX 8mm spiral core
universal fit wire sets
Terminated at the plug end only and includes enough wire length
and terminals to fit HEI or non-HEI distributors. Sets are for eight
cylinder engines. A coil wire is included when required. Sets for
other engines also available.
DESCRIPTION
90° Plug Terminal - Red
90° Plug Terminal - Black
90˚ Boot Plug Terminal - Blue
Straight Plug Terminal - Blue
Straight Plug Terminal - Black
135˚ Boot Plug Terminal - Black
PART NO.
73219
73231
73225
73226
73232
73233
spiral core coil wire Kit
All the parts necessary to make a coil wire fit nearly all
popular coils & distributor cap combinations. Kit contains 3’ of BlueMax™ Spiral Core 8mm suppression
wire, stripping tool and 13-piece boot terminal kit.
DESCRIPTION
8mm, 800 ohm
PART NO.
73235
6
IGNITION & ELECTRICAL
ultra 40 race wire sets
At 40 ohms of resistance per foot, Moroso Ultra 40 Race Wire incorporates a spiral wound nickel/copper alloy conductor wrapped at the optimum ratio to produce the highest level of spark energy while producing
the lowest level of electromagnetic and radio frequency interference.
Moroso’s new Kevlar® core, four times stronger than other aramid fiber
cores, allows an increase to the tensile strength of the wire while reducing its center diameter. Surrounding insulation is also increased resulting in greater dielectric strength.
APPLICATIONS
90˚ Universal
Straight Universal
135˚ Universal
SB Chevy Sleeved Over Valve Cover 90˚ Plug - HEI
SB Chevy Sleeved Under Header 90˚ Plug - Non-HEI
SB Chevy Sleeved Under Header 90˚ Plug - HEI
BB Chevy Sleeved Over Valve Cover 90˚ Plug - HEI
BB Chevy Sleeved Under Header 90˚ Plug - Non-HEI
Ford Sleeved 351W 135˚ - HEI Style Cap
Ford 289-351W Sleeved 135˚, HEI
PART NO.
73800
73801
73802
73602
73605
73607
73615
73616
73626
73630
8.5mm war Horse sleeved race wire
8.5mm CUSTOM FIT - spriral wound core
Fierce EMI / RF suppression
Fiberglass reinforced sleeve: 50kv+ Dielectric
High Temperature silicone boots
Locking race terminals - corrosion resistant
Shrink sleeved boots prevent voltage loss
Numbered ID tag for each wire
PART NO.
APPLICATION
16302
Ford, 302, 135˚ Boot, HEI
16351
Ford, 351W, 135˚ Boot, HEI
16350
SB Chevy, Over V/C, 90˚ Boot, HEI
16350U
SB Chevy, Under Header, 90˚ Boot, HEI
16454
BB Chevy, Over V/C, Straight Boot, HEI
16454U
BB Chevy, Under V/C, 90˚ Boot, HEI
Blue maX™ spiral core sleeved wire sets
Take them out of the box, plug them in, and go racing. They come complete with 8mm, 800 ohm Spiral Core Wire pre-terminated at both ends
with the correct terminals & boots, insulating sleeve that runs the entire
length, shrink tubing to seal the boots and numbered ID tags.
Blue maX™ sparK plug Boot & terminal Kit
Manufactured from high temperature silicone. Comes in sets of 8
with positive, locking spark plug terminals.
#72040
#72080
DESCRIPTION
SB Chevy, HEI, Male/HEI, 90˚ plug, Over VC
SB Chevy, HEI, Male/HEI, 90˚ plug, Under VC
BB Chevy, HEI, 90˚ plug, Under VC
PART NO.
72402
72407
72416
DESCRIPTION
Coil HEI Boot & Terminal
Coil Non-HEI Boot & Terminal
PART NO.
72040
72080
IGNITION & ELECTRICAL
7
superstocK 4000 series sparK plug wire sets
ACCEL's SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for
high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded
over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM inner
insulation for ignition wire performance that exceeds SAE specifications.
Features include:
* 8mm yellow, red, black, and blue silicone jackets
* Street-driven applications
* Orange and color-matched blue, red, and black silicone spark plug boots
* Pre and post-HEI vehicles
PART NO.
SIZE
DESC
COLOR
PLUG BOOT
COIL WIRE
ASSEMBLED
RFI
4039
8mm
copper
yellow
90 deg
yes
no
no
4040
8mm
graphite
yellow
straight
yes
no
yes
4040B
8mm
graphite
blue
straight
yes
no
yes
4040R
8mm
graphite
red
straight
yes
no
yes
4041
8mm
graphite
yellow
90 deg
yes
no
yes
4041B
8mm
graphite
blue
90 deg
yes
no
yes
4041K
8mm
graphite
black
90 deg
yes
no
yes
4041R
8mm
graphite
red
90 deg
yes
no
yes
4048
8mm
graphite
yellow
stock GM, male HEI
yes
yes
yes
superstocK spiral core 5000 series sparK plug wire sets
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these
SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots. With
only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results are higher performance through improved efficiency, quicker throttle
response, and reduced emissions. Their double silicone construction eliminates arcing and is rated to 550
degrees F. The high-gross wire jacket resists moisture, chemicals, and heat extremes for longer life and great
looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark
plug terminals provide excellent long life, electrical conductivity, and corrosion resistance.They're designed for
street-driven, pre and post-HEI applications.
PART NO.
SIZE
DESC
COLOR
PLUG BOOT
5137B
8mm
carbon graphite
blue
stock, female socket
slip collar
Adjustable design to give you height adjustment
on your distributor.
PART NO.
8539
COIL WIRE ASSEMBLED
no
slip collar
yes
RFI
MAKE
yes
91-99 Ford 4.6L truck, crown vic
Adjust installed height for dead-center gear
alignment. Fits Moroso’s DuraBillet Distributors
and MSD Distributors.
PART NO.
26217
8
Spiro-Wound Core
wire crimping tool
A must for every racer’s tool box. These pliers are ideal for terminating
spark plug wire sets. Strip, cut and crimp automotive wiring from 10 to 22
gauge. Heavy duty steel with comfort grip insulating handles.
PART NO.
16385
DESCRIPTION
Heavy Duty Crimping Tool
PART NO.
45423
45429
Boot Heat sHields
Polished Aluminum, snaps over existing Pro Boot®.
PART NO.
2570
pro-crimp tool ii
New and improved with an improved chassis.
Slip-free grip for a secure handle when working.
Supplied with crimping/stripping dies for MSD
dual crimp spark plug wire terminals.
PART NO.
35051
mini-stripper crimper
Provides a “die” to strip either 8mm Heli-Core or 8.5mm
Super Conductor Wire, then can be used in a vise to provide a solid terminal crimp to the wire.
wiring Harness
Plug directly into your factory coil and harness. Four color coded wires plug into the
corresponding wires of the MSD box. Two
wires from MSD to the battery and you’re
done, with no cutting or splicing.
PART NO.
8876
crimping tool
Cuts and crimps all popular primary wire. Crimps
both 7 & 8mm spark plug wire ends. Made of high
carbon steel with PVC non-conductive handle
grips.
PART NO.
43390
clip-on colored wire separators
DESCRIPTION
PART NO.
Black, 7mm-8mm
42800
Red, 7mm-8mm
42820
Blue,7mm-8mm
42860
Black 409’s, 10.4mm
42809
clamp style
wire separators
dual wire separators
Separators securely grip two wires to route
them cleanly along the engine surface.
Molded from polyacetal for high heat resistance. Supplied in a package of 16.
PART NO.
8841
pro-clamp separators
Keeps plug wires in a tidy order and away
from engine heat sources. Supplied with two
5-wire assemblies, two 3-wire assemblies
and four 2-wire assemblies.
PART NO.
8843
DESCRIPTION
90˚ Boots, 2-pk.
Color coordinated to match plug wires. Tough nylon withstands 400° F.
Fits 7-8mm wires. Two each of 2 wire, 3 wire, 4 wire separators.
PART NO.
3503
APPLICATION
Wires Up to 8.8mm
DESCRIPTION
Red 90˚/180˚ plug boots 8mm Spiral-Pro Repair Kit
Red Coil wire kit - 8mm Spiral-Pro
Molded from non-conductive 6/6 nylon, these separators will not melt, mar, distort, crack or fade. Fits
7-8mm and “409” 10.4mm plug wires. Contains 2-4
wire, 2-3 wire and 2-2 wire separators.
WIRE SIZE
7-8mm
“409”10.4mm
BLACK
42700
42709
RED
42720
42729
BLUE
42760
42769
BracKets for clamp wire separators
Mounts “clamp style separators” to valve covers. Fits 7-8mm and “409”
Clamp style brackets.
DESCRIPTION
Horizontal, SBC & most Chrysler - 4 pack
Vertical, SBC & most Chrysler - 4 pack
Vertical, BBC & most Ford - 6 pack
BLACK
42701
42705
42706
RED
42721
42725
42726
IGNITION & ELECTRICAL
sparK plug & coil wires
IGNITION & ELECTRICAL
9
B
A
fire Boots
C
The cure for spark plug wire failure in high heat
environments. EW’s Fire Boot will withstand up
to 1200˚ F. Universal size and shape fits most
boots, even 90˚. Package of 8.
PART NO.
16201
16202
16203
16204
16211
DESCRIPTION
6” Silver
6” Black
6” Red
6” Blue
6” Silver , 4-pk.
wire separator
BracKets
D
F
E
loom Kits & wire separators
DESCRIPTION
UNIV.
(A)
SHOW
(B)
BBC
(C)
SUPER
LOOM (D)
4 HOLE
KITS (E)
WIRE
TORS(F)
SBF
Blue 7-8mm
Red 7-8mm
Yellow 7-8mm
Black 7-8mm
72150
72151
72152
72153
72170
72168
72169
72167
72175
72176
72177
72178
72171
72172
72173
72174
72180
72181
72182
72183
72160
72161
72162
72163
72130
72131
72132
72133
Clamp-style BBC/Most Ford,
Horizontal, Red,
Qty. 6
PART NO.
42722
sB cHevy mounting BracKets
Use with clamp style wire separators,
SBC/most Mopar, Vertical, Red, Qty. 4
PART NO.
42725
BB cHevy clamp style BracKets
BBC/Most Ford, Vertical, Red, Qty 6.
PART NO.
42726
replacement looms
Hi-temp under Header loom Kit
Designed for routing wires under headers on old and new
style SB Chevy engines. Includes four chrome plated
brackets, two 4-hole looms, two 2-hole looms, two 4-hole
separators, two 3-hole separators and two 2-hole separators and mounting bolts. Black, 7-9mm.
PART NO.
72195
competition wire looms
wire separator Kits
The wire separator keeps plug wires in order,
away from the hot exhaust manifold. It’s a must
for use in race and performance street cars.
Use with Mr. Gasket wire loom bracket kit for
super neat ignition wiring.
DESCRIPTION
7mm, black
8mm, silver
PART NO.
3676
3677
PART NO.
6015
Eliminates “cross firing” by keeping
ignition wires insulated. Looms are compatible with
tall valve covers and accommodate both 7 and 8mm
ignition wires. Kit is complete with two 3-hole
dividers, four 2-hole dividers, and four chrome brackets.
centerBolt wire loom
Fits late model SBC (‘87-’96)
with the center bolt valve covers.
Made of brushed aluminum, they
fit 7mm and 8mm wires and can
be used with up to 8.8mm wires with
modification. Packaged as 2 looms.
PART NO.
6042
Direct replacement looms for 7-9 mm
wire as used in Moroso Loom Kits.
High-temperature injection molded
polyester for extended durability. Also
fits other brand’s loom brackets. Not
for use with part no. 72195. Packaged
two per card.
DESCRIPTION
4-Hole, Blue, 7-9mm
PART NO.
97832
PART NO.
6016
custom wire loom Kit
Eliminates cross firing and prevents
heat damage to ignition wires while
giving a neat, custom look. Made from
heat resistant black plastic, the wire
divider clips to a chrome plated steel
bracket that can be attached to the
valve cover. Equally spaces both 7 and
8mm ignition wires. Includes two 4-hole
wire dividers, eight 2-hole wire dividers
and four chrome plated steel brackets.
10
custom 8mm wire separators
Constructed from high-temperature ABS plastic and chrome-plated for
lasting beauty. Wire separators help engine performance by minimizing
ignition crossfire and prolong spark plug wire life by holding wires away
from hot engine components, giving them a neat and custom look.
Includes two, 2-wire, 3-wire and 4-wire separators and allen wrench.
Using the divisional red color, the CHEVROLET name
and Bow Tie logo are molded onto the black nylon head
of each wire loom, mounted on chrome stems. Fits
Chevrolet small-block V8, 1959-86 and Chevrolet Big
Block V8 1965-91. 4-wire looms, 2 per package.
PART NO.
141-636
PART NO.
9723
linear wire looms
Using the valve cover mounting bolts, these are positioned along the
valve cover to hold the wires in a neat parallel arrangement. Wire
holders are opened and closed individually with a patented nylon
wedge to permit the chrome tops to have a smooth surface free of
screw holes. 1 pair per package.
competition wire separator Kit
Designed for competition and street use, these Competition Wire
Separators minimize “cross firing” by keeping the ignition wires sufficiently
separated from each other. Made from a heat resistant plastic, these wire
separators will accommodate 7 and 8mm ignition wires. Kit includes two
each 2-wire, 3-wire and 4-wire separators.
DESCRIPTION
Black with Logo
Black without Logo
Red without Logo
Blue without Logo
DESCRIPTION
SB Chevy 59-86
BB Chevy 65-91
PART NO.
141-638
141-639
Before purchasing, check exhaust
manifold for correct usage. For
clearance reasons, the manifold
must not be much higher than the
valve cover mounting flanges.
PART NO.
6017
9728
9727
9877
BlacK plastic
wire ties
universal plug wire divider BracKet set
Commpetition wire separators that fit 7 or 8mm wires keeping them sufficiently insulated and separated from each other to minimize “cross-firing.”
Adjustable tabs allow for easy mounting to most valve covers. Made from
aluminum and available in three attractive colors. Measures 14-3/4" long.
Packaged two per set.
DESCRIPTION
7-inch (100-pk.)
14-inch (100-pk.)
PART NO.
16707
16714
R6038
wire looms witH BracKets
Polished Aluminum 2-Piece for Early
Model. Fits spark plug diameters up
to 9.5mm.
DESCRIPTION
Brushed Aluminum
Blue Anodized
Red Anodized
PART NO.
6018
6022
6023
DESCRIPTION
Ball Milled
Flame
Plain
PART NO.
R6038
R6038X
R6039
R6039
IGNITION & ELECTRICAL
ignition wire looms
IGNITION & ELECTRICAL
11
pro style wire separators
clip-on numBered wire marKers
DESCRIPTION
PART NO.
Chrome for 8 or 9 MM Wire R9576
Black for 8 or 9 MM Wire
R9577
Fits all 7-8mm & 10.4mm ignition wires , 2 sets of numbered clips 1-8.
DESCRIPTION
7-8mm wire
PART NO.
41060
3407
sHrinK sleeving
Shrinks tightly around wire to protect. Designed to
withstand high temperature.
numBered sHrinK sleeves
DESCRIPTION
Pre-numbered from 1-8
PART NO.
72020
DESCRIPTION
ProHeat Guard set of 18
Numbered shrink sleeve
PART NO.
3407
3415
wire marKers
wire sHrinK sleeve
Packed in 25’ lengths. Extends spark plug wire life.
DESCRIPTION
Ultra 40, fits 8.65mm
PART NO.
72011
sHrinK sleeves
Insures a complete seal between spark plug, distributor boots, & spark plug wire sleeves.
Packaged 18 per set
DESCRIPTION
Blue
Black
PART NO.
72030
72031
Eliminate firing order errors with these easy
to read black on white wire markers. Oil and
grease resistant. Set of 8.
DESCRIPTION
8mm wire
cool-tuBe™ wire & line protector
Designed to protect wires, fuel and brake lines and other areas
from extreme heat. Capable of reflecting radiant heat up to 500˚F,
Cool-Tube reduces temps by 43˚.
DESCRIPTION
3/4” I.D. x 3”
sparK plug indeXer
cylinder marKers
Supplied on a trick tool that makes installation easy.
DESCRIPTION
8.5mm wire
PART NO.
3414
PART NO.
4472
PART NO.
010406
Designed for both flat and taper seat
14mm spark plugs. Once a plug is selected, it’s placed in the indexer and the position of the ground electrode marked on the
black anodized surface.
PART NO.
62160
12
Flexible polyethylene tubing split for wire removal or insertion.
Groups and protects wires from abrasion.
COLOR
Black
Red
Blue
Purple
10 FT 1/4" I.D. 25 FT 1/4" I.D. 10 FT 3/8" I.D. 25 FT 3/8" I.D.
38090
38092
38180
38100
38190
38192
38280
38200
38260
38261
38360
38361
--------38830
-----
7 FT 1/2" I.D.
38580
38680
38560
38840
25 FT 1/2" I.D.
38500
38600
38561
-----
5 FT 3/4” I.D.
38780
38880
38760
-----
25 FT 3/4” I.D.
38700
----------
u-groove performance sparK plugs
Produce a larger spark for more power at high rpms. They improve throttle response and fuel economy and reduce
fouling. Their purified Alumina insulator prevents arcing, and their machine-rolled threads protect heads.
PART NO.
0265
0274
0276
0416
0576
0786
RESISTOR
no
no
no
yes
yes
yes
HEAT RANGE
5
4
6
6
6
6
INSULATOR
non-projected
projected
projected
projected
projected
projected
THREAD SIZE
14mm
14mm
14mm
14mm
14mm
14mm
REACH
.460"
.460"
.460"
.750"
.460"
.750"
WRENCH DIA
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
SHORTY
no
no
no
no
no
no
SOLD AS
each
each
each
each
each
each
See inside back cover for spark plug
comparison chart
14mm racing sparK plugs
NGK racing spark plugs are built to withstand the severe mechanical and thermal shock associated with high-revving,
high-compression engines. NGK racing plugs feature electrode materials-precious metals like platinum or gold/palladium-for greater durability and low voltage requirements. Fine-wire center and ground electrodes provide better sparking and
enhanced ignitability. And, the special arrangement of insulator noses improves throttle response! So, what's firing your race car
to the winner's circle? Whether you're a weekend warrior or an expert racer, rocket your way to victory with racing spark plugs from
NGK-the people who spark winners! Electrode core = Copper. Electrode tip = Nickel Alloy.
PART NO
2746
2891
3354
3332
2405
2817
3249
3442
4050
4449
5034
5657
6630
2771
3951
1049
7317
7891
2238
4177
7938
7373
4091
4554
5238
5820
6596
7173
7405
7942
5962
STOCK NO
R5670-6
R5670-7
R5670-8
XR5
R5673-6
R5673-7
R5673-8
R5673-9
R5673-10
R5674-6
R5674-7
R5674-8
UR4
UR5
TR55
B8EFS
R5724-8
R5724-9
TR5
TR6
BKR5E
FR5
R5671A-7
R5671A-8
R5671A-9
R5671A-10
R5671A-11
R5672A-8
R5672A-9
R5672A-10
R6061-10
REACH
.375"
.375"
.375"
.375"
.460"
.460"
.460"
.460"
.460"
.460"
.460"
.460"
.460"
.460"
.691"
.708"
.708"
.708"
.708"
.708"
.750"
.750"
.750"
.750"
.750"
.750"
.750"
.750"
.750"
.750"
.750"
HEX
13/16"
13/16"
13/16"
13/16"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
5/8"
13/16"
SEAT
Gasket
Gasket
Gasket
Gasket
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Tapered
Gasket
Gasket
Gasket
Gasket
Gasket
Gasket
Gasket
Gasket
Gasket
Gasket
Gasket
MODEL
Non-Resistor
Non-Resistor
Non-Resistor
Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Resistor
Resistor
Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Resistor
Resistor
Resistor
Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
Non-Resistor
INSULATOR
Projected
Projected
Projected
Projected
Non-projected
Non-projected
Non-projected
Non-projected
Non-projected
Projected
Projected
Projected
Projected
Projected
Projected
Non-projected
Projected
Projected
Projected
Projected
Projected
Projected
Non-projected
Non-projected
Non-projected
Non-projected
Non-projected
Projected
Projected
Projected
Non-projected
IGNITION & ELECTRICAL
convoluted tuBing
13
cHampion platinum power sparK plugs
IGNITION & ELECTRICAL
Platinum Power offers features you won't find on standard plug designs, including a copper core center
electrode tapered to a platinum tip. This is combined with a Champion-exclusive tapered, copper core
side electrode for improved ignitability and longer plug life, and projected core nose that provides more
power and smoother idle.
Hemi tuBe well covers
Tube well Covers, Black
DESCRIPTION
426 Hemi, set of 8
PART NO.
44300
cHrome tuBing
Exclusive Taylor chrome process will not
chip or peel. Multiple sizes available.
DESCRIPTION
1/4” ID x 41” length
3/8” ID x 41” length
1/2” ID x 41” length
3/4” ID x 41” length
PART NO.
39001
39002
39003
39004
sparK plug indeXing wasHers
Designed for use on all 14mm spark plugs with 5/8" hex.
Three thicknesses in each package, one will correct the electrode placement on any plug and simplify the time consuming
task of spark plug indexing. Precision stamped from copper
for perfect sealing and heat transfer. Use with Moroso spark
plug indexing tool below. 30 per pack, 10 each size.
DESCRIPTION
PART NO.
Tapered, 14MM
71900
Flat Seal, .043", .050", .064"
71910
14
IGNITION & ELECTRICAL
engine works distributor cutaway
IGNITION & ELECTRICAL
15
outlaw series distriButors & accessories
•
•
•
•
•
•
Made from 6061 aluminum. The aluminum is hot forged, not cast
Each unit is fully machined on multi-axis CNC machines
Sealed ball bearing in the upper housing
.500" coated steel shaft
Measured at an independent site, Engine Works distributors maintain a more accurate retard at higher RPM than the competition (1º retard vs. 2)
Each unit is tested for thermal shock and RPM accuracy
DISTRIBUTOR
CAP
ROTOR
COIL
GEAR
1
Chevrolet V8
w/Mech. Advance
16551
16111
16000RD
16050R
16000BK
16050R-BK
16000RD
16050R
16551
16111
16000BK
16050R-BK
16551
16111
1BK
Chevrolet V8
w/Mech. Advance,
Black Cap
16551
16111
1RTR
Chevrolet V8 CD Ready to Rock
1RTR-BK
Chevrolet V8 CD Ready to Rock
Black Cap
16
DISTRIBUTOR
CAP
ROTOR
COIL
GEAR
1VAC
Chevrolet V8
w/Vacuum Adv.
1VOR
Chevrolet Vortec V8
w/Aluminum
Housing
1SC
Chevrolet V8
w/Mech. Adv, single
pick-up with slip
collar
16000RD
16050R
16551
16111
16051C
16051R
16553
16110
16000RD
16050R
16551
16111
16054C
16054R
16567
16117
16054C
16054R
16567
16117
3
Ford 5.0 TFI
w/o Module 91-95
3MOD
Ford 5.0 TFI
w/Module 86-93
IGNITION & ELECTRICAL
outlaw series distriButors & accessories
IGNITION & ELECTRICAL
17
outlaw series distriButors & accessories
DISTRIBUTOR
CAP
ROTOR
COIL
GEAR
3RTR-289
Ford 302/289 CD Ready to Rock
16001RD
16050R
16551
16114
16001RD
16050R
16551
16116
16001RD
16050R
16551
16115
16001RD
16050R
16551
16114
16001RD
16050R
16551
16116
3RTR-351C
Ford 351C CD Ready to Rock
also 400,429-460
3RTR-351W
Ford 351W CD Ready to Rock
3-289
Ford 302/289
w/Mech Advance
3-351C
Ford 351C
w/Mech Advance
also 400, 429-460
18
DISTRIBUTOR
3-351W
Ford 351W
w/Mechanical
Advance
CAP
ROTOR
COIL
GEAR
16001RD
16050R
16551
16115
16054C
16054R
16567
16118
16054C
16054R
16567
16118
16056C
16056R
16551
NA
16056C
16056R
16551
NA
3-58
Ford 5.8 TFI
w/o Module
94-97 truck
3-58M
Ford 5.8 TFI
w/Module
84-91 truck
4-318
Chrysler
273-318
w/Mech Adv - "LA"
4RTR-318
Chrysler
273-318
RTR - "LA"
IGNITION & ELECTRICAL
outlaw series distriButors & accessories
IGNITION & ELECTRICAL
19
outlaw series distriButors & accessories
DISTRIBUTOR
CAP
ROTOR
COIL
GEAR
16056C
16056R
16551
NA
16056C
16056R
16551
NA
16056C
16056R
16551
NA
16056C
16056R
16551
NA
16000RD
16050R
16551
16111
4-383
Chrysler 383/400
Short Deck
w/Mech Adv - "B"
4RTR-383
Chrysler 383/400
Short Deck
RTR - "B"
4-440
Chrysler
426/440 Tall Deck
w/Mech Adv - "RB"
4RTR-440
Chrysler 426/440
Tall Deck
RTR - "RB"
5RTR
Cadillac V8
CD
Ready to Rock
20
DISTRIBUTORS
165100
Chevrolet HEI
In-Cap Coil Distributor
165101
Chevrolet HEI
In-Cap Coil Distributor
165102
Chevrolet HEI
In-Cap Coil Distributor
165103
Chevrolet HEI
In-Cap Coil Distributor
FORD HEI STREET/STRIP 1-PIECE
• Internally positioned coil and module
that avoids the unsightly wiring of stock
Ford electronic ignition systems
• Higher voltage spark that permits a
bigger spark plug gap, resulting in
more power and reduced plug fouling
• Includes a high-power coil, premium hi-dielectric cap with brass terminals and a low-saturation ignition module - Blue cap
• Assembled with upper and lower bushings
PART NO.
DESCRIPTION
CAP
DUST
COVER
ROTOR
COIL
16501C
16501R
16554
16501D-BK
16501C
16501R
16554
16501D
16501C-BK
16501R-BK
16554
16501D-BK
16501C-BL
16501R-BL
16554
16501D-BL
pontiac/
oldsmoBile
Hei electronic
• Includes 50,000 Volt Coil
• Red cap
•
•
•
•
PART NO.
DESCRIPTION
16514
SB & BB Pontiac
(1974-80)
16515
Oldsmobile V8
16515
1987-97 GM Trucks and 1987-93 cars
Used in applications with external coil
Small sized premium quality cap with brass terminals
Highly polished die-cast aluminum shaft for a billet look
16519
Ford 289-302
16531
Ford 351C-400M, 429, 460
PART NO.
16532
Ford 351 Windsor
16521
16514
IGNITION & ELECTRICAL
street/strip Hei distriButors
IGNITION & ELECTRICAL
21
durafire distriButors
Complete Bolt-In Replacements for HEI Chevrolet V8
engines. Now there’s no need to build your own
high-output distributor that you can tune for non-computerized HEI Chevy V8’s. The ignition experts at Moroso
have done it for you!
pro-Billet ready-to-run
cHevy v8 distriButor
The perfect upgrade for outdated points distributors or bulky HEIs. Connect three wires and the
coil and installation is complete. Supplied with
cap, rotor and vacuum advance.
Moroso’s new DuraFire Distributors come equipped with
everything needed to customize the ignition timing curve
for your particular street/strip application. It features several high-output components including Moroso’s ProCoil
that provides more complete combustion for easier
starts, smoother idle, improved acceleration and more
horsepower!
Included: High-Output Module, Mechanical Advance
Curve Kit, HEI Cap & Rotor, High-Output ProCoil &
Cover, option of Adjustable Vacuum Advance
PART NO.
72231
PART NO.
8360
pro-Billet
cHevy v8 distriButor
This is MSD’s most popular performance distributor! The high output magnetic pickup is the
most accurate way to trigger your ignition. Must
be used with an MSD 6, 7, 8 or 10 Series
Ignition. Supplied with cap and rotor.
APPLICATION
GM HEI, V8, w/out Vacuum Advance
Check out the features:
A. One-piece aluminum housing is cleanly
machined for neat appearance; steel shaft and
gear provide concentric operation
B. HEI Distributor Cap and Rotor are precision
molded from advanced polymers with solid
brass contacts and low-resistance center coil
brush
C. Mechanical Advance Curve Kit with extra springs
allow you to recurve your distributor
for full advance at optimum RPM; precision
stamped weights, welded pins and center
plates with smooth edges eliminate erratic timing
D. Moroso’s ProCoil combines low oxygen, highconductivity magnet wire, high-silicon core
material, and non-porous epoxy impregnation to
produce extremely high current and
extended duration for increased spark energy
E. High-Output Module delivers high spark output
and extended reliability
F. Adjustable Vacuum Advance (available on No.
72230) allows you to dial in as much spark
advance as conditions permit; built-in stop prevents the adjustment screw from backing out
DESCRIPTION
PART NO.
Chevy V8
85551
Chevy V8 w/Slip Collar
85561
Chevy V8 w/Locked-Out Timing
85501
D
B
low profile tall BlocK cranK
trigger distriButor
C
E
F
A
Designed for racing engines that use a crankshaft
triggered ignition and fit in tight quarters. Billet
Aluminum housing. Chevy V8 w/HEI-Style
Terminals applications.
PART NO.
8558
pro-Billet corvette
tacH drive distriButor
Replaces Corvette’s Magna-Pulse Distributor.
Must be used with an MSD 6, 7, 8, or 10 series
igntion. Supplied with cap & rotor.
PART NO.
8572
replacement parts:
advance curve Kits
• “Recurve” your distributor for full spark advance at the
optimum RPM
• Three sets of advance springs allow you to adjust the rate of
spark advance
• Weights and centerplates precision stamped with smooth edges
eliminate erratic timing
• Comes with complete installation instructions
PART NO.
72300
72310
APPLICATION
GM HEI Distributors
All 57-75 GM/Delco Non-HEI
pro-Billet lt1 distriButors
Different from OEM, MSD's pickup is an
advanced optical encoder, which is stable
during extreme RPM. Once installed, you can
adjust the ignition timing +/-5° with just the
turn of a screw--an industry first! The distributor
is also equipped with a fresh-air vent and extra
thick mounting surface to eliminate leaks.
PART NO.
8381
83811
APPLICATION
GM LT-1 94-96 late model
GM LT-1 5.7L 93-94
22
MSD engineers created a unique ignition module and
internal coil that are capable of running above 9,000
rpm. The MSD module produces 50% more current
than stock units and delivers a much more precise timing signal as well as dwell control. Designed to replace
GM HEI Distributors that use a 4-pin ignition module.
Billet ford v8
distriButor
Equipped with a large cap with spark plug syle
terminals to prevent crossfire. Must be used
with a MSD 6, 7, 8 or 10 Ignition. Supplied with
a cap and rotor.
DESCRIPTION
PART NO.
Ford 351C, 351M, 400, 429, 460
8580
Ford 289, 302
8582
Ford 282, 302 w/steel gear
8598
Ford 351W
8584
PART NO.
8365
pro-Billet ready-to-run gm v8
late model distriButor
Drop-in replacement for GM V8s using small cap
distributor. Cars from 87-93, trucks from 87-95.
PART NO.
8366
pro-Billet ready-to-run
ford distriButor
The perfect upgrade for bulky DuraSpark systems or ancient breaker point models. All you
need to do is drop it in, connect three wires
and fire up the engine. Each unit includes vacuum advance.
DESCRIPTION
SB Ford
BB Ford C/M/Boss 429/460
351W
PART NO.
8352
8350
8354
street fire gm v8 Hei distriButor
Features include Magnetic Pickup and
Vacuum/Mechanical Advance. High voltage is
transferred through a specially designed rotor to
the brass terminals of the distributor cap and out to
the plugs.
PART NO.
8362
Small base diameter for extra clearance. Magnetic Trigger
and Mechanical Advance. Housing is machined from
high-quality 6061-T6 aluminum for durability and showquality looks.
APPLICATION
Chevy V8
Ford 351C-460
Ford 351W
Ford 289-302
pro-Billet ready-to-run distriButor
All that is required is to install the distributor in the
engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's
idle, improve starting, and perform at a much higher rpm.
The housing is machined from billet 6061-T6 aluminum.
PART NO.
8393
Simple installation, just connect 3 wires.
Features vacuum advance & mechanical
advance assembly.
DESCRIPTION
PART NO.
Ford 352, 360, 390, 427, & 428
8595
pro-Billet small diameter distriButors
PART NO.
8570
8577
8578
8579
ready-to-run ford
fe & y-BlocK distriButor
APPLICATION
Chevy 58-65, 5.7L/348, 6.7L/409
super tall BlocK craB cap
cranK trigger distriButor
Chevy V8 HEI Crab Cap applications.
PART NO.
8486
pro-Billet olds v8
distriButor
To accurately trigger the ignition, a high output magnetic pick-up is bolted to the base. This trigger pickup produces a precise trigger signal that will never
vary more than 1˚.
PART NO.
8566
IGNITION & ELECTRICAL
pro-Billet gm Hei distriButor
IGNITION & ELECTRICAL
23
craB style cap
cHevy v8 distriButor
ford 351w witH victor Jr
Billet distriButor
Equipped with a special low profile crab style
cap to fit in extremely tight areas. Must be
used with a MSD 6, 7, 8 or 10 Ignition and
Crank Trigger. Supplied with cap, rotor and
bronze gear.
Designed to fit 351W with Edelbrock
Victor Jr. intake manifold. Magnetic
Trigger, Mechanical Advance
PART NO.
85805
PART NO.
8489
pro-Billet ford
late model distriButor
When you start making serious power with
your EFI Ford, the stock distributor shaft is
one of the weak links. MSD’s Pro-Billet models
answer the need for an affordable replacement
in a strong and great looking package.
DESCRIPTION
Ford 5.0L 1986-1993
Ford 5.0L 1994-1995
PART NO.
8456
8455
pro-Billet ford fe distriButor
A magnetic pick-up triggers your MSD ignition
control accurately at any RPM. Supplied with
cap & rotor. Does not accept a vacuum
advance or cap-a-dapt.
DESCRIPTION
Ford 332, 352, 360, 390,
406, 410, 427, 428
PART NO.
8594
Shares the same features as #8360 except it
must be used with an MSD ignition control.
Cap and rotor not included. Chevy V8 with
magnetic trigger.
PART NO.
8361
pro-Billet BuicK v8
distriButor
Uses a high output magnetic trigger to
fire an MSD ignition control. An
adjustable mechanical advance mechanism is mounted on top of the shaft. A
variety of advance stop bushings and
springs are supplied so you can dial-in a
custom curve.
PART NO.
8517
Billet ford 2.3l distriButor
Features an aluminum housing that is CNC
machined to closer tolerances than any conventional cast distributor. Adjustable mechanical
advance on top of the distributor base that can
be easily tailored to any engine by changing the
top bushing and advance springs.
PART NO.
8473
pro-Billet pontiac
v8 distriButor
Special features include a fully adjustable
mechanical advance assembly. Advance mechanism can also be easily locked-out. Must be used
with a MSD 6, 7, 8 or 10 Ignition. Supplied with a
cap and rotor. Pontiac V8 326-455.
PART NO.
8563
pro-Billet ford
street distriButor
A magnetic pick up produces accurate trigger
signals that remain stable throughout the
entire RPM range and is completely maintenance free.
DESCRIPTION
Ford 289, 302
pro-Billet cHevy v8
street distriButor
PART NO.
8479
ready-to-run
pontiac v8 distriButor
Easy to wire with only 3 wires. Includes
mechanical advance that can be adjusted easily. Also has a vacuum advance
canister.
PART NO.
8528
Billet cHrysler v8 distriButor
Features an aluminum housing CNC-machined from
solid billet for tight tolerances and high strength. Must
be used with a MSD 6, 7, 8 or 10 Ignition Control.
Supplied with a cap and rotor. Does not accept a vacuum advance.
DESCRIPTION
273, 318, 340, 360
383, 400
426, 440
PART NO.
8534
8545
8546
pro-Billet sB/BB cHevy cranK
trigger distriButor
PART NO.
84697
APPLICATION
SB/BB Chevy w/mechanical advance
24
Chevrolet V8 Engines 262-400 and 396-502. 100% All
New from Cap to Gear. CNC-Machined 356 T-6 Aluminum
Housings. High Performance Mallory Electronics. Red
Cap and Rotor with Brass Inserts. Direct Plug-in
Replacement with OE Factory-type Harness Connectors.
HEI Coil provides Higher Output for Higher RPM with
Quicker Response. High Performance Adjustable
Mechanical and Vacuum Advance.
DESCRIPTION
With Mallory 29212 Perf. Coil
PART NO.
8548201C
Heavy duty aluminum Hold down clamps
Fits Chevy SB, BB, and V6/90. Heavy-Duty machined
aluminum. Includes clamp, stud, nut and washer.
DESCRIPTION
Billet Aluminum
Blue Anodized
Red Anodized
PART NO.
16165
16167
16166
comp s/s 32 series
• CNC machined billet housing
• Ball bearing upper and bushing lower for maximum stability
and RPM
• 208 style cap w/wire retainer - 20% more cross-fire resistant
• 2 Wire Ford Style Magnetic Pick-up and Reductor
• Trigger Style Distributor Requires a CD Ignition System
• Easy to Adjust Mechanical Advance
APPLICATION
PART NO.
55-96 Chevy V8-RH 262-454, 502
exc. 55-74 Corvette w/mech tach,
348-409, Rocketblock,Tall Block, &
Merlin/Superblock
3248201
R9126
distriButor clamps
DESCRIPTION
Chrome, Chevy V8 1963-up, OEM Style
Billet Aluminum, SB Chevy
Chrome, Chevy V8 1963-up, Competition Style
Chrome, Ford Distributor Clamp - OEM Style
PART NO.
R4116
R5116
R9126
R4455
distriButor Hold-down Kits
Hei electronic racing distriButor witH coil
DESCRIPTION
SBC, BBC. Includes 50,000 volt coil
Ford 351C-400M, 439-460, black cap
PART NO.
66941BK
66980BK
Competition Kit features rolled edges for extra
strength. Ideal for use on magnetos as well as
standard and electronic ignition distributors. Complete with bolt or
stud mounting, flat and lock washers, nut and distributor gasket.
Chrome plated finish. Standard Kit replaces stock unit.
DESCRIPTION
Chevy SB/BB, Competition Kit, Stud Mount
Chevy SB/BB, Standard Kit, Bolt Mount
Ford 260-351W Competition clamp w/stud & nut
Ford, Small Block/351W, Bolt Mount
PART NO.
6197
1009
2502
9860
flame tHrower Billet distriButors
plug-n-play tecHnology!
Now you can upgrade your outdated points, stock electronic or
aftermarket distributor with a performance proven distributor that
features the patented Ignitor II electronic ignition module. Housings
are CNC machined from 6061 T-6 aluminum and polished to a
show quality finish. Ignition energy is sustained with less heat
build-up in the coil and module because peak current level is
reached just prior to spark. Compatible with most coils.
APPLICATION
SB/BB Chevy Billet Distributor Black Cap
SB/BB Chevy Billet Distributor Red Cap
PART NO.
D100700
D100701
Hei electronic distriButor witH 50K coil
DESCRIPTION
Chevy HEI Electronic Distributor
with 50,000 Coil - Red Cap
PART NO.
R3925
distriButor Hold down
Fits all MSD Pro-Billet Chevy distributors and the Pro-Mags.
Includes mounting stud, lock washer & nut.
DESCRIPTION
Billet aluminum, Ford SB/Boss/Cleveland/Modified
Billet Steel black SB/BB Chevy
PART NO.
8010
8110
distriButor Hold down clamps
Includes stud, washer and nut.
DESCRIPTION
PART NO.
All V8 & 90˚ V6 Chevy engines, Gold Iridite
26200
All V8 & 90˚ V6 Chevy engines, Chrome
26210
IGNITION & ELECTRICAL
cHevy v8 Hei distriButor
IGNITION & ELECTRICAL
25
distriButor gear sHim set
8437
Fits GM, Mopar & most Fords. Contains
two-.010”, one-.020”. one-.050” for 1/2”
diameter.
distriButor caps
PART NO.
2820
8433
MSD Extra Duty distributor caps are designed
with performance in mind. Made from
high quality, voltage insulating material
and uses low resistance terminals.
distriButor sHim & BusHing Kit
Raises distributor .125”, shims are one each of .030”,
.060”, .090” nylon material. Fits SB and BB Chevy.
DESCRIPTION
PART NO.
Chevy V8 std. Alkyd
8437
GM V8 HEI Tower Window Cap w/ Wire Retainer
8433
GM HEI V8, red
8411
Late Model HEI, External Coil
8426
Pro-Billet Small Diameter Distributor
8431
Ford V8 HEI
8408
VW Distributor
8434
HEI style, Red, V8 marine ProBillet
8565
PART NO.
2822
distriButor gear sHim Kit
Includes two .010", two .020" and one .053" shims.
PART NO.
26140
replacement craB cap
distriButor sHim Kit
DESCRIPTION
90˚ boots, socket, set of 8
Includes one each .030", .060" and .100" shims.
PART NO.
26150
PART NO.
8541
modified distriButor cap
DESCRIPTION
Civic/Integra LS ‘92-’00
PART NO.
82923
outlaw distriButor caps
For Engine Works Outlaw Series #1 Distributors
DESCRIPTION
Black
Red
PART NO.
16000BK
16000RD
distriButor cap & rotor Kits
DESCRIPTION
Fits GM 4.3L V6 with EFI
GM LT-1 1193-94 SFI
Ford V8 1985-95
cap & rotor Kits
Manufactured from high quality alkyd material to
withstand high voltages. Utilizes low resistance
copper/brass terminals. Bright red finish.
DESCRIPTION
PART NO.
GM HEI cap, coil cover & rotor
16540
8482
PART NO.
8430
8481
8482
cap-a-dapt
Crossfire, ionization & voltage leaks are common problems
that can result from using high energy ignition systems with
small, low quality caps & rotors. These problems are eliminated by adapting a large, 5-3/8” cap on to your MSD distributor.
208M
distriButor caps
DESCRIPTION
32 series distributor
YL8 auto. stack, vented
YL for 25, 26, 37, 38 & 50 series with flat cap
81-84, 85-89 series, SuperMag, Magneto
PART NO.
208M
209M
221
29745
DESCRIPTION
PART NO.
Cap-A-Dapt w/fixed rotor
8445
Replacement fixed rotor
8423
Black Distributor Cap-A-Dapt 84083
For Ford V8 HEI
26
8467
IGNITION & ELECTRICAL
8427
distriButor rotors
Molded from high quality, voltage insulating material that
resists carbon tracking and ensures ignition spark reaches
the spark plugs. Rotor tip made from low resistance brass.
DESCRIPTION
GM and MSD Race Rotor w/Window Caps
GM and MSD HEI
GM and MSD Small Cap HEI
Ford and MSD 5.0L Late Model
Ford large cap, Duraspark
Rotor & Base for low profile distributor
VW, Ford 2.3L
Rotor for crab cap distributor
PART NO.
8467
8410
8427
8070
8407
8457
8470
8567
gm Hei distriButor tune up components
Includes absolutely everything needed to
bring a stock distributor up to new performance standards including a 50,000 volt
coil, premium cap and rotor.
PART NO.
16501
DESCRIPTION
Cap, Rotor and Coil kit, red
Hei replacement cap
Includes coil cover
PART NO.
16501C
DESCRIPTION
Red
7445
distriButor cap & rotor
DESCRIPTION
Pro cap for most MSD distributors
Cap & Rotor kit for V8 DuraSpark
Cap & rotor kit for GM V8 HEI, Internal Coil OE
Cap-A-Dapt, adjustable rotor
Rynite Distributor Cap and Rotor Kit
Standard MSD Distributor
PART NO.
7445
8414
8416
8420
84335
lt1 distriButor cap and rotor Kit
Finally a high-quality cap and rotor for the front mount
LT1 distributor. LT1 fans have been searching for a cap
to deliver the performance of the LT1, and MSD is
happy to oblige. Changing the cap and rotor on this
engine is no walk in the park so install the best
parts possible. The all new cap housing is injection
molded from a special Dupont material that provides
extreme strength and high dielectric properties resulting
in less chance of breakdown causing a misfire. The terminal paths are
encased in a durable epoxy compound for even more protection.
DESCRIPTION
LT1
PART NO.
84811
ultimate Hei gm Kit
Everthing you need to make your early model
GM HEI Distributor a great performance
distributor. The kit is supplied with MSD’s
Digital 7.5 amp performance Module (PN
83645). Complete kit with a brass terminal
Cap, Rotor, Module, Coil and dust cover.
PART NO.
8501
Hei dust cover
Allows removal of the stock HEI coil in the
distributor cap in order to replace it with an
externally mounted coil.
PART NO.
8401
CH-181
ignitor® solid-state ignition system
309
distriButor rotors
DESCRIPTION
All YL non-vacuum, stack
All YL8 Unilite vacuum
37 & 38 series
RH for 81, 82, 84 series w/pro cap
distriButor points
DESCRIPTION
PART NO.
All YL non-vacuum, standard duty 25042
condenser
DESCRIPTION
Accel point type distributors
Delivers twice the voltage to the spark plugs.
Electronics are molded in epoxy eliminating
deterioration from dirt, oil, grease or moisture.
Fits entirely inside the distributor.
PART NO.
400
PART NO.
309
322
335
29772
APPLICATION
76-81, Chrysler, 8 cyl.
Delco, 4 cyl.
Delco, Vacuum Advance, 6 cyl.
Delco, GM 57-74, 8 cyl., Magnet Ring Style
Delco, GM 57-74, cw, 8 cyl.
Ford, 4 cyl.
Chrysler, 8 cyl.
Ford 54-56, Y Block
Ford, 49-53, 8 cyl.
Marine, square tip
Bosch, Neg Ground, 6V, 4 cyl.
Autolite IAT-4010, 6 cyl.
Mallory, YL/HP/DP, 25, 26, 31, 32, 4 cyl.
Mallory, YL/HP/DP, 25, 26, 31, 32, 8 cyl.
PART NO.
CH-181
1146A
1162A
1181
1181LS
1244A
1381A
1282
1283
1581
1847V
1569N24
ML-141
ML-181
IGNITION & ELECTRICAL
27
Hei HigH performance module
Operates misfire-free up to a maximum of 7500 RPM.
PART NO.
D2000
HigH performance ignition module
Engineered with low saturation for maximum spark intensity.
DESCRIPTION
73-86 GM V8 HEI
Pontiac Fiero
HEI Replacement w/pig tail
PART NO.
16500-5
16501-5
16600
Hei control modules
Fits most stock and modified GM HEI distributors. Solid state electronics provides high output and superior reliability. Dwell control circuit
ensures long, consistent coil charging while current control circuit
protects against coil overheating.
APPLICATION
4-pin HEI GM
outlaw magnetic picKup
PART NO.
35361
DESCRIPTION
PART NO.
Magnetic Pick Up for Outlaw Series distributors
14661
outlaw advance Kit
DESCRIPTION
Mechanical advance spring & bushing kit
digital Hei
ignition module
PART NO.
14664
A direct plug-in for the 4-pin HEI module.
Produces up to 7.5 amps of current. 9,000 RPM.
DESCRIPTION
Digital HEI ignition module with Rev Limiter
PART NO.
83647
msd distriButor advance Kit
DESCRIPTION
Distributor Advance, Mechanical, Bushing &
Spring Set for MSD Distributor
replacement msd magnetic picKup
PART NO.
84661
PART NO.
8464
msd distriButor weigHt Kit
Includes the needed components to make your distributor perform like it did when it was brand new.
DESCRIPTION
Includes weights, spacers, and weight pads
PART NO.
8628
unilite BreaKerless
ignition conversion
Consists of an integrated photo coupler,
a signal processor and a power switch.
DESCRIPTION
Replacement Module
Magnetic Ignition
advance curve Kits
PART NO.
605
609
DESCRIPTION
69-Up GM Delco
GM Delco, 3 Spring Sets
GM HEI 74-79 w/o engine computer
65-Up Ford (most)
59-Up Mopar
PART NO.
927G
928G
929G
925D
925B
28
distriButor gears
Engine Works distributor gears are machined from AMPCO-45 extruded bronze alminum. Cast iron distributor gears are not compatible with 8620 billet cam material.
ENGINE
MATERIAL
DISTRIBUTOR
DESCRIPTION
C.I. / LITER
SIZE
GM
16100
Chevrolet
Bronze*
165100
OEM
all
.491"
16101
Chevrolet
Bronze*
1, 1RTR
Aftermarket
all
.500"
16101-6
Chevrolet
Bronze*
1, 1RTR
+ .006
all
.500"
16110
Chevrolet
Cast Iron
165100
OEM
all
.491"
16111
Chevrolet
Cast Iron
1, 1RTR
Aftermarket
all
.500"
16105
Pontiac
Bronze*
16514
OEM
all
.489"
FORD
16110
16100*
*
*All Bronze Gears
Made In USA.
16113
SB Ford
Steel
3RTR-289, 3-289
Mechanical Advance & RTR
221-302
.467"
16117
SB Ford
Steel
3
Remote Module
(91~95) 5.0
.531"
16117
SB Ford
Steel
3RTR
Module
(86~93) 5.0
.531"
16116
SB Ford
Cast Iron
3RTR-351C
RTR
351C~460
.531"
16114
SB Ford
Cast Iron
3RTR-289
RTR
221-302
.467"
16115
SB Ford
Cast Iron
3RTR-351W
RTR
351W
.531"
16116
SB Ford
Cast Iron
3-351C
Mechanical Advance
351C~460
.531"
16115
SB Ford
Cast Iron
3-351W
Mechanical Advance
351W
.531"
16103
SB Ford
Bronze*
Aftermarket
Mechanical Advance
221-302
.467
16114
SB Ford
Cast Iron
3-289
Mechanical Advance
221-302
.467"
16118
SB Ford
Steel - 16117
Iron - 16115
3-58
Additonal Iron Gear in Box
SB Ford
Steel - 16117
Iron - 16115
16118
Remote Module
.531"
(94-97) 5.8
Module
3-58M
Additonal Steel Gear in Box
.531"
.531"
(84-91) 5.8
.531"
gm Hei adJustaBle vacuum advance
PART NO.
16509
distriButor gears
Increased outer hardened layer thickness (RC55-60).
Micro polished for smooth surface.
vacuum advance locKout
Molded lockout is the simple and inexpensive
way to lockout Chevy mechanical advance distributors.
DESCRIPTION
Vacuum Advance Lockout
PART NO.
16508
vacuum advance locKout
Allows you to easily remove the vacuum advance from
MSD distributors that are CW rotation.
DESCRIPTION
Vacuum Advance Lockout
PART NO.
8468
DESCRIPTION
Chevy, Bronze oversize for MSD distributor +.006
Iron Chevy Gear, .500" ID
Iron, Chevy, Melonized, Marine, .500 ID
Bronze Chevy Gear, .500" ID
Bronze, Ford 351C, 351M, 400, 429, 460, FE, .530 ID
Bronze Ford 289, 302 Gear, .466" ID
Bronze, Ford 351W, .531 ID
Bronze, Pontiac V8, .500 ID
Iron Ford 351C, 351M, 400
Iron Ford 351W, .531 ID
Steel, Non-EFI Ford 302 w/rollercam
Steel, Ford EFI 302 w/roller cam (replacement for
MSD 8455 & 8456), also for MSD 351W distributors .531” shaft
distriButor gear
cHrome vacuum advance cover
DESCRIPTION
Vacuum Advance Cover
Bronze, Chevy 262-454 Distributor Gear
PART NO.
R4973
PART NO.
R3931
PART NO.
8472
8531
8561
8471
8581
8583
8585
85631
85812
85832
85833
85834
IGNITION & ELECTRICAL
PART NO.
IGNITION & ELECTRICAL
29
Blaster HigH viBration coil
engine worKs coils
Higher voltage output by these coils
results in more complete fuel burn,
especially in high RPM applications. 16552
16680
Withstands the harsh beating of off-road, dirt track or
marine racing. Injected molded shell is potted with premium grade epoxy to completely encase the coils primary
and secondary windings. The coil tower is made of alkyd
material that prevents carbon tracking and arc over.
PART NO.
8222
16551
16554
16564
automatic coil selector
Two ignitions, two coils, and a single pole, double throw
switch are required.
PART NO
DESCRIPTION
16550
High Output CD coil heat sink
RESISTANCE VOLTAGE
0.3 Ohms
48,000
16551
High Output CD coil epoxy
0.4 Ohms
45,000
16552
Oil Filled Can Coil - Black
0.7 Ohms
45,000
tacH adapters
Corrects most popular tach
and fuel injection systems
operation with MSD ignitions.
16680
Oil Filled Can Coil Chrome
1.4 Ohms
45,000
16554
GM HEI coil-in-cap
0.3 Ohms
48,000
16555
GM 1984-95 EFI OBD 1
coil
0.3 Ohms
45,000
16564
GM 1986-09 AC Delco
style twin tower DIS
0.4 Ohms
44,000
16568
Ford 1991-03 4-tower
DIS early design
0.6 Ohms
36,000
Blaster 2 coils
Metal canister, oil filled coil with alkyd top to prevent
arcing between terminals insuring maximum voltage.
For stock upgrade or MSD 5, 6 & 7 Series ignitions.
Coil 8203 includes coil, coil boot, terminal and a ballast resistor for use on stock vehicles as well as ones
equipped with an MSD ignition system.
Blaster 3 coil
Coil tower design offers more secure coil wire
attachment and better spark isolation than
standard coil towers.
PART NO.
8223
#8920
PART NO.
8200
8202
8203
8205
8213
#8910
DESCRIPTION
PART NO.
For use on non-current limiting ignitions,
originally equipped with a ballast resistor
Designed for current limiting ignition systems
(non-ballast resistor)
Distributorless Tach Driver
8910
8910EIS
Tach/Fuel Adapter, Magnetic Trigger Installations or
Current Triggered Tachometers
8920
Tach Drive adapter, Tang to square drive
8491
pro power Hvc coil
8200
DESCRIPTION
Chrome for MSD & OEM ignitions, 45,000 Volts
Red for MSD ignitions, 45,000 Volts
Red for MSD & OEM ignitions, 45,000 Volts, w/ballast
Red for Ford applications, 45,000 Volts
Chrome universal coil bracket
PART NO.
8210
8913
MSD’s Pro Power HVC Coil is designed for racing
applications with MSD 7 Series Ignition Control.
With a combination of extremely low primary resistance and the efficient design of an E-Core coil, the
HVC produces high voltage without compromising
the current output. Due to this unique design, the
Pro Power HVC is perfect for long duration racing
events or on the street! The coil is held firmly between aluminum brackets
and is supplied with tough vibration mounts. For use with MSD 7, 8 or 10
Plus Series Ignitions only.
PART NO.
8251
pro power coil
MSD’s Pro Power Coil is the best choice for short duration applications such as drag racing. The special windings of the Pro Power Coil have extremely low resistance to produce the highest voltage possible with
great spark energy when used with an MSD 7, 8
or 10 Series Ignition Control. To isolate the high
voltage, the coil wire tower rises tall above the primary terminals and uses a spark plug style terminal for a firm connection to the coil wire.
PART NO.
8201
30
HEI owners now have a choice to replace
their stock coil with the MSD High Energy
Unitized Coil for GM HEI Distributors. This coil is a direct
replacement of the stock coil and offers increased spark energy when used with the MSD HEI Module 8364. Coil features
special low inductance, high temperature windings that charge
faster to give you increased spark energy at higher RPM.
Premium epoxy-filled construction is designed to withstand
harsh race applications as well as daily wear and tear.
msd 6 Hvc coil
Designed exclusively for and must be
used with the HVC Professional Racing
Ignition Control.
PART NO.
8250
Hvc pro power 2 coil
PART NO.
8225
Use with series 7 ignition controls.
Blaster tfi & gm coils
Increased turns ratio plus lower primary resistance than your stock coil. Works with stock TFI
ignition systems as well as MSD-equipped cars
and trucks.
DESCRIPTION
GM 48,000 V
Ford 48,000 V
PART NO.
8226
8227
PART NO.
8261
Blaster Hvc coil
Designed to produce maximum power with
a MSD 6 Series Ignition Control.
PART NO.
8252
gm single connector coil
Used on 96-99 GM vehicles.
PART NO.
8231
Blaster Hvc 2 coil
New coil technology to be used with the
MSD 6 series line for incredible voltage
and high current.
gm dis coil
Used on vehicles from the mid 1980s
to late 1990s.
PART NO.
8224
PART NO.
8253
Blaster ss coil
dodge coil
Late model Dodge, 2-pin connector.
MSD’s efficient coil windings are designed
to produce high amounts of current without
sacrificing the voltage output. Secondary
windings are wound on a segmented bobbin that improves placement and distribution of the high voltage. May be used with
stock or CD ignitions.
PART NO.
8207
PART NO.
8228
4-tower coil
MSD offers these two 4-tower coils as
replacements for a variety of years ranging from 1994-2003 on vehicles including Mitsubishi, Neon, Talon and others.
The difference is the wiring connector.
DESCRIPTION
Flat terminals
ford 4-tower coil
DOHC/SOHC
1995-98 4.6L
PART NO.
8241
PART NO.
8239
remote super coil
APPLICATION
87-95 GM, 48,000 V
PART NO.
140011
4-tower style edis
super coil pacK
APPLICATION
89-99 Ford EDIS, 42,000 V
PART NO.
140018
IGNITION & ELECTRICAL
gm Hei coil
IGNITION & ELECTRICAL
31
140032
canister style ignition coils
Feature an oil-filled design and an arc-resistant alkyd top
for superior performance, insulation, and cooling.
APPLICATION
PART NO.
Round, Oil Filled, Chrome, 51,000 V
29216
promaster classic series coil
Glass-filled polyester case and oil-filled construction to
ensure a long life and no energy loss from arcing. This
series also offers better wire retention with a spark plug
type secondary post, and brass contact terminals.
APPLICATION
Black, 55,000 V
ford super coils
Turns ratios to delivery 10-15% more energy than
the OEM coils. Specialized high temperature epoxy
resists shock and vibration, while increasing thermal conductivity
Set of 8
140032-8
Round, Oil Filled, Chrome, 58,000 V
140034
PART NO.
29440
16574
16572
engine worKs® modular (cop)
coil on plug coils
flame tHrower
HigH performance coil
Maximizes energy and reliability over the full
RPM range. Delivers an average of 15%
more spark energy and voltage. Increases
gas mileage. Fits existing brackets.
DESCRIPTION
Chrome Oil Filled, 1.5 ohm
Black Oil Filled, 1.5 ohm
Black Epoxy, 1.5 ohm
Black Oil Filled, 3.0 ohm
PART NO.
40001
40011
40111
40511
Engine Works® Modular Coil On Plug Coils are
designed to work with factory DIS and aftermarket ignition systems. Resistance and inductance
values have been optimized to increase output at
higher RPM levels. This higher energy output for
use on turbo or supercharged engines with higher
than factory boost levels or engines that have
been converted to E85 fuel. Strong EMI/RFI noise
suppression. Max. Volt. - 48,000, Prim/Sec.
Resistance: 0.35/5.5K Ohms. Direct bolt-in and
plug-in fit. Ford 4.6L/5.4L (6.8L) 2, 3 or 4 valve
heads. Also available for GM and Mopar.
APPLICATION
Ford 97-10 4.6L/5.4L/6.8L, 2 valve
PART NO.
16570
Ford 04-08 4.6L/5.4L/6.8L, 3 valve
16572
Ford 08-11 4.6L/5.4L/6.8L, 3 valve
16574
Ford 97-10 4.6L/5.4L, 4 valve
16576
flame tHrower ii
HigH performance coil
45,000 volt high performance coil. For use with our
Ignitor II ignition system. 0.6 ohm resistance. Chrome or
O.E.M. black (for that stock look), or epoxy for harsh
conditions. Compatible with capacitive discharge systems (CD box). 4, 6, or 8 cylinder for city and racing.
DESCRIPTION
Chrome Oil Filled
Black Oil Filled
82428
PART NO.
45001
45011
ford Blaster coil-on-plug
ignition coil pacKs
flame-tHrower iii
45,000 volt canister coils
It is an ultra low resistance (0.32-ohms) 45,000-volt
coil. These new canister style coils were engineed
to charge to peak current typically 30-70% faster
the other coils. This means maximum spark energy
is sustained to higher engine RPM. These coils are
compatible with both the Ignitor II and Ignitor III
electronics.
DESCRIPTION
Black Oil Filled
140034
APPLICATION
PART NO.
Ford 98-07 4.6L/5.4L/6.8L Mod 2 valve 140032
PART NO.
44011
Features a patented winding design and direct boltin replacement. Produces higher voltage and spark
energy than factory coils, Set of 8
APPLICATION
SOHC 4.6L 1999-04
PART NO.
82428
SOHC 4.6L 2005 & Up
82438
32
Blaster socket terminal and boot on one side
with a distributor cap socket terminal and
boot on the other. 18” long. Used with 8.5 mm Super Conductor Wires.
cHrome coil BracKet
Universal mounting for standard
coils up to 2.25” diameter.
DESCRIPTION
Male/HEI Coil Plug Ends
Male/HEI & Female/Socket Coil Plug Ends
PART NO.
16580
PART NO.
84039
84049
coil Ballast resistor
Connects MSD coil to stock points
ignition system, 0.8 Ohm
PART NO.
8214
coil BracKet
Especially useful for engine modifications
where coil remounting is necessary.
Dichromate plated.
PART NO.
3685
ignition coil Ballast resistors
cHrome coil cover
Features universal design to accept most stock
coils. Includes chrome plated mounting bracket.
DESCRIPTION
Coil cover, chrome
Coil bracket, chrome
PART NO.
9777
9767
Variable Resistance, 0.75-1.5 Ohms
PART NO.
700
wire Harness & capacitor
PART NO.
66946C
APPLICATION
HEI SB Chevy
coil Holders
DESCRIPTION
Chrome Universal Coil Cover & Bracket
Chrome GM Type Stand-Up Coil Holder
Chrome Coil Bracket Only
Chrome Ford Coil Bracket Only
PART NO.
R9006
R9366
R9648
R9650
®
tacH adapter
Allows users to connect a tachometer,
shift light or RPM activated switch to their
distributorless ignition system, including 1999 and newer Ford Mustang.
PART NO.
9117
cHrome coil BracKet
The chrome plated MSD Coil Brackets offer easy,
universal mounting for standard size ignition coils up
to 2-1/4 in. diameter, including all MSD Blaster Coils. A
special tab is provided for external condenser mounting,
if required. For secure tightening, the brackets use a bolt
and nuts instead of screws.
APPLICATION
Canister-Style, Universal
PART NO.
8213
noise filter w/cover
If you experience radio noise after installing the MSD
IGNITION, you may need to install an MSD Noise Filter.
PART NO.
8830
IGNITION & ELECTRICAL
coil wire
IGNITION & ELECTRICAL
33
34
ignition systems
IGNITION & ELECTRICAL
6012
6013
6011
IGNITION & ELECTRICAL
35
6aln nascar cd ignition
street fire cd ignition
MSD's Street Fire CD ignitions are built within a durable
cast aluminum housing and easily connects to points, amplifiers,
and magnetic pickup distributors. There's even an adjustable rev
limiter (100 rpm increments) for overrev protection!
DESCRIPTION
For 4, 6, and 8-cylinder engines
PART NO.
5520
Designed with NASCAR racing in mind
and is NASCAR approved. Features a
6-pin weathertight connector to meet
NASCAR rules that provides a tight, positive locking connection with individual
seals to keep dirt and moisture away from
each connection. Recommended for 4, 6 (Even-fire V6 only)
and 8-cylinder engines.
PART NO.
6430
6m-2l marine ignition witH rev limiter
The MSD 6M-2L ignitions have the same
mounting footprint as the original units,
so they will easily fit into existing
brackets. The proven Soft-Touch rev
limiting action is set using MSD's marine
rpm modules, so you'll be able to set a
rev limit exactly where your engine needs
it. The 6M-2L ignitions are built to deal with constant high rpm and
load conditions unique to marine applications.
PART NO.
6460
digital 6al ignition controller
Improved output--135-145mJ of spark
energy for every firing with 530+ volts
to the coil! 0.7 amps per 1,000 rpm.
Built-in rev limiter, for 4, 6 or 8 cylinders.
PART NO.
6425
6-Btm cd ignition w/control
Ideal for engines with turbo or supercharger. Features an adjustable
boost/timing retard circuit. Fits 4.6L
even-fire only and 8 cylinder engines
PART NO.
6462
6al-2 ignition BoX
There is a 2-Step rev control built into the housing, but there are no
rpm modules! Adjustments are made via four
rotary dials for 100 rpm increment control! The
all-new capacitive discharge ignition will easily
connect to nearly any 12V negative ground
distributor system, even Hall-effect pickups.
PART NO.
6421
programmaBle digital 6al-2 ignition BoX
The all-new MSD programmable digital 6AL-2 ignition
boxes will easily connect to nearly any 12V negative ground distributor system, even Halleffect pickups. They offer higher output with
up to 135mJ and 535V and accept points
and mag pickup triggers.
PART NO.
6530
dis-4 plus digital ignition
Step retard, rotary adj. dials. 6 cyl. engines
with two, three or four coil packs.
PART NO.
62152
digital-6 plus cd ignition
Micro-processor controlled timing and rev
limiting functions. Two step rev control
for consistent launches and over-rev
protection. Single stage retard for nitrous
and top end performance. Controls are
adjusted with built-in rotary switches.
PART NO.
6520
7al-2 plus cd ignition
All the features of the standard 7AL-2 plus
the addition of a two-step rev-control and a
new diagnostic LED, these ignitions deliver
their full power at any rpm.
PART NO.
7222
APPLICATION
Pro race for 4-6-8 cylinder
programmaBle tcddigital-7 cd ignition
Features Traction Control Detection (TCD). The TCD circuitry monitors the
magnetic pickup input. If it senses that signal has been modified, it will go
into a rev limiting mode, set a trouble
code and flash an LED indicating that a
traction control has been detected.
NHRA APPROVED.
PART NO.
7530T
programmaBle digital-7 plus ignition
All of the standard programmable features such as individual cylinder
management, step retards, rev Iimits, shift points and more are included
in the Plus version but you get much, much more. A map sensor is
required for the boost circuit. Supplied with wiring harnesses, mounting
hardware, and RS232 computer harness
and the Pro-Data software on a floppy
disk. It will accept trigger signals from a
points/ECU output or a magnetic pickup.
PART NO.
7531
crossover delay BoX
CO2- Setting the box is quick & easy
with 3 sets of push button thumbwheels. The quicker racer enters both
dial-ins along with the desired transbrake delay.
SCO1- A crossover box, a delay box, and an interfacer to give the
races two shots at the tree, all with just one transbrake button.
DESCRIPTION
Crossover Delay Box
PART NO.
CO-2
36
ignition control
IGNITION & ELECTRICAL
37
IGNITION & ELECTRICAL
power gridTM ignition system
38
power gridTM ignition system
IGNITION & ELECTRICAL
39
IGNITION & ELECTRICAL
power gridTM ignition system
40
Hyfire® vi-al digital cd ignition
• High Output Multi-Spark Ignition System • Digital Performance At Analog
Prices • Built-In Easy-to-Adjust Digital Rev Limiter- 4,500 12,000 RPM- No
Chips Required! • Latest Microprocessor Controlled Circuitry • Easy to Install •
Lightweight Aluminum Housing- Maximum Heat Transfer • More Performance
and Lower Power Draw • Quicker Acceleration and Throttle Response •
Works with Points, OEM or Aftermarket Electronic Ignition or Magnetic Crank
Triggers (exc. Hall Effect) • Use 29440 or 29625 ProMaster Coil
PART NO.
6853M
Must be used with an MSD6, SCI, 7, 8, or 10 series ignition.
Allows you to adjust the amount of ignition retard 1˚ to 3˚ per lb.
of boost via a dash mounted control knob.
APPLICATION
Boost Timing Master
PART NO.
8762
adJustaBle timing control
Dash mounting allows you to adjust ignition timing to
compensate for changes in altitude, low octane gas, or
heavy loads. Adjustment of 15 degree range. Must be
used with MSD 5, 6, 7, 8 or 10 Series ignition.
PART NO.
8680
Hyfire® vi multi-striKe cd ignition
2 Stage Rev Limiting in 100 RPM
Increments. Automatic Start Retard Circuit
For Easier Starting. Built In RPM Window
Switch. Great for Nitrous Oxide. Great for
Supercharged, Turbocharged and Nitrous
Applications. Use 29440 or 29625 ProMaster Coil.
tHree stage retard
Retards your ignition timing in three different stages. Activate one retard
for a nitrous stage and another at top end in high gear for more mph and
still have another module left over for dual
stage nitrous systems. Must be used with an
MSD 6, SCI, 7, 8 or 10 Series Ignition.
PART NO.
685
PART NO.
8970
digital multi-retard
Provides four different stages of retard along with an
adjustable start retard. All of this with no modules!
Uses a high speed RISC microcontroller to direct
the timing functions. May be used on 4, 6 or 8
cylinder engines and must be used with MSD
Ignition Control.
102005
PART NO.
8975
start retard control
102003
102007
cd-1 capacitive discHarge ignition system
For circle track, drag racing, and marine applications. CD-1 units
feature digitally set RPM limiter programmable advance curves, and
a new patented power supply that reduces current draw. The standard and marine versions include data logging capability. 135 mJ
spark energy output.
DESCRIPTION
PART NO.
CD-1 Capacitive Discharge Ignition Kit
102003
USB Interface
102004
RTD-1 Retard Control
MAP Sensor Harness Kit
Power Filter Capacitor Kit
TCS-1 Timing Controller
CD-1 Marine Ignition Kit
102005
102006
102007
102008
103003
(includes #102001 CD-1 ignition module, #102002 CD-1 ignition coil, and wire harness)
(required for custom programming and data logging capability)
(includes #113001 ignition module, #113002 ignition coil, and wire harness)
Lets you choose either 10˚ or 25˚ or retard during cranking only. Supplied with 2˚, 3˚ and 4˚
modules. Must be used with MSD 6, SCI, 7, 8
or 10 ignition control.
APPLICATION
Start Retard Control
PART NO.
8982
starter saver w/signal staBilizer
Automatically retards the timing during cranking to
ease the pressure at the flywheel.
APPLICATION
Starter Saver
PART NO.
8984
soft toucH rev control
Protects your engine from dangerous over-revving due
to missed shifts, broken drivetrain or loss of traction.
Used for points and OEM ignition systems, not for
capacitive discharge ignitions. Includes 6000, 7000
and 8000 RPM modules.
APPLICATION
Soft Touch Rev Limiter
PART NO.
8728
IGNITION & ELECTRICAL
Boost timing master for
msd ignitions
IGNITION & ELECTRICAL
41
rpm activated switcH
Performs a variety of different functions from turning on a bulb or solenoid
to activate an MSD timing control at a desired RPM.
APPLICATION
RPM activated switch
RPM Activated window switch
Digital RPM window switch
PART NO.
8950
8956
8969
module selectors
Switch between 2 or 3 different RPM or retard modules when used with
MSD Soft Touch Rev Control or MSD timing computer.
DESCRIPTION
Two Step
Three Step
PART NO.
8739
8737
megafire rpm limiter switcH
MEGAFIRE now offers the convenient and
highly accurate RPM Limiter Switch. Two
switches offer 12 settings in 200 RPM
increments. Plugs into the REV Limit socket
of MEGAFIRE and MSD ignitions.
PART NO.
16671
16672
APPLICATION
4600 to 6800 RPM
6000 to 8200 RPM
rpm selector
Plugs directly into the RPM module socket on all MSD Soft Touch Rev
Control and accessories using plug-in modules.
APPLICATION
3000-5200 RPM
4600-6800 RPM
6000-8200 RPM
7600-9800 RPM
PART NO.
8670
8671
8672
8673
retard module selector
12 retard selections
PART NO.
8676
megafire module Kits
Each kit contains a set of five close tolerance “pills” programmed in
200 RPM increments. Compatible with all ignition and gauge products
that use RPM modules.
PART NO.
16643
16644
16645
16646
16647
16648
APPLICATION
3000-3800 RPM
4000-4800 RPM
5000-5800 RPM
6000-6800 RPM
7000-7800 RPM
8000-8800 RPM
adJustaBle low rpm modules
APPLICATION
1000-3000 RPM
PART NO.
8677
retard module Kits
Gives you a full selection of retard modules to be used with your timing controls.
APPLICATION
Zero Degree Module
11˚, 12˚, 13˚,14˚,15˚
5˚, 6˚, 7˚, 8˚, 9˚, 10˚
1˚, 2˚, 3˚, 4˚, 5˚
PART NO.
8773
8774
8776
8777
rpm module Kits
Includes 5 modules in 200 RPM increments within a 1000 RPM range.
For example 8745 includes: 5000, 5200, 5400, 5600 and 5800 modules.
DESCRIPTION
3000 - 3800 RPM
4000 - 4800 RPM
5000 - 5800 RPM
6000 - 6800 RPM
7000 - 7800 RPM
8000 - 8800 RPM
9000 - 9800 RPM
10000 - 10800 RPM
3100 - 3900 RPM
4100 - 4900 RPM
5100 - 5900 RPM
6100 - 6900 RPM
7100 - 7900 RPM
8100 - 8900 RPM
PART NO.
8743
8744
8745
8746
8747
8748
8749
8750
87431
87441
87451
87461
87471
87481
wiring Harnesses & adapters
Harnesses and adapters are handy for quick installation on late model
vehicles. No cutting or splicing!
DESCRIPTION
PART NO.
MSD to GM 96-up single connector coil
8877
MSD to Ford TFI Harness
8874
MSD 6 or 7 to Ford Duraspark
8869
Connector Adapter Cable
MSD 6 or 7 to Magnetic Trigger Inside GM HEI
8861
Distributor Bypass Cable
viBration mounts
Used for off-road, drag race, marine and oval track
vehicles where strong vibration forces can be transmitted through the chassis to the MSD unit.
DESCRIPTION
7AL-2, 7AL-3, 8 & 10 Series MSD (4/card)
5 & 6, Digital 7 Series MSD (4/card)
Pro Power Coil, .44” x .50” 3/card
PART NO.
8800
8823
8825
#8825
42
For a long time, racers have known that one
of the best things to do to an engine to
improve its performance is to stabilize the
ignition timing. The MSD Flying Magnet
Crank Trigger system does exactly that by
using four magnets embedded in an aluminum
wheel. Although similar in appearance to other crank triggers, the MSD
Flying Magnet design works on a different principle.
DESCRIPTION
SB Chevy
SB Chevy
SB Chevy
BB Chevy
Chrysler BB
Ford SB
Ford BB
APPLICATION
6.25” Balancer
7.00” Balancer
8.00” Balancer
8.00” Balancer
7.25" Balancer
289, 302, 351W
Except Cleveland
PART NO.
8600
8610
8615
8620
8636
8640
8644
IGNITION & ELECTRICAL
cranK trigger Kits
firewall feed-tHru
Molded from Rynite® and nylon, the Firewall
Feed-Thru provides 1/2" of insulation to ensure
that the coil’s spark reaches the distributor.
APPLICATION
Red
PART NO.
8211
tHru-panel Battery connector
Connector fits through 1-1/4" hole. Use Battery
Cable Remote Fitting End Kit Numbers 74170 or
74172 to complete installation. One per package.
APPLICATION
Thru-Panel battery connector
PART NO.
74145
replacement caBles
Special aluminum skinned sleeve
DESCRIPTION
6’ cable harness, 2 wire magnetic triggered
Aluminum shielded magnetic pickup cable 6’
PART NO.
8860
8862
picKup assemBly
Engineered for extreme applications.
Designed & tested on 300+mph top
fuel dragsters.
DESCRIPTION
Use with MSD flying magnet crank trigger kits
syncHronization Kit
This pickup simply installs on the number one
spark plug wire. Uses a fiber optic cable so
there is no chance of EMI or
interference.
PART NO.
8276
tHru-panel Battery connector
A must anywhere voltage needs to be passed through a
firewall or panel. Quality US made connector with brass
terminals. Requires drilling of a 1" hole.
APPLICATION
PART NO.
Thru-Panel Connector
16779
adel clamps
APPLICATION
1/2-in., 6-pk.
1/4-in., 6-pk.
3/8-in., 6-pk.
5/8-in., 6-pk.
PART NO.
38012
38014
38038
38058
DESCRIPTION
PART NO.
Inductive Spark Plug wire pickup
7555
module Holder
two pin connector Kit
APPLICATION
Comes with two connectors and 4 pins.
APPLICATION
Two pin connector kit
PART NO.
8824
Clear plastic case holds 35
modules
PART
NO.
8755
weatHertigHt sealed connector
Positive locks let you know when connectors are
completely joined by producing an audible click.
No click means no connection.
APPLICATION
Male/Female 6-pin (individual)
Male/Female 4-pin (individual)
Male/Female 3-pin (individual)
Male/Female 2-pin (individual)
Male/Female 1-pin (individual)
PART NO.
8170
8171
8172
8173
8174
toggle switcH panel
Heavy duty on/off switches are 12 volt single
throw with screw terminals rated at 25 amp
lamp load and 35 amp inductive load.
APPLICATION
Drag race, 4” x 7.75” Includes starter button, 5 on/off
Cage-Mount includes 5 on/off with starter button.
Steel bracket to be welded to roll cage
PART NO.
74131
74135
IGNITION & ELECTRICAL
43
race car rocKer
switcH panels
single contact solenoid
Designed with the features desired
by most racers. Heavy duty lightweight non-reflective housing
mounts to roll bar with hose
clamps. Lighted rocker switches are color coded for quick visual
reference. All circuits are individually fused and easily accessible
for quick testing and change. Units come with 18' of high temp TXL wires
using machine applied, vibration resistant, fully insulated terminals.
DESCRIPTION
PART NO.
4 Switch Panel-Start + 3 Fused Circuits That Light Up When On
50301
6 Switch Panel-Start + 5 Fused Circuits That Light Up When On
50302
8 Switch Panel-Start + 6 Fused Circuits That Light Up When On
50303
8 Switch Panel-Roll Bar Mount, Lighted Non-Fused Switches
50202
PART NO.
16771
on/off toggle switcH
On/off Face Plate included. Used to control
accessories such as lights, pump, fan etc. Rated
at 25 amps lamp load, 35 amps inductive load.
APPLICATION
Short handle 1-1/16”
replacement rocKer switcHes
APPLICATION
On/off - Red light
On/off /momentary on - Green lights
On/off/on - Red lights
On/off - Blue lights
Useful as a relay to trigger shifters, nitrous
solenoids, starter or any other high amp draw
item. Rated to 750 amps for intermittent use.
Ground through mounting base. Heavy Duty.
PART NO.
80401
80402
80403
80405
PART NO.
74126
adJustaBle momentary switcH
15 amp rating, Ideal for operating transbrakes
or line locks on drag race cars. Adjustable collar
allows the plunger travel to be set from .020 in.
to .219 in., making the switch "fast" or "slow"
to suit individual reaction time requirements.
PART NO.
74123
transBraKe switcHes
Plastic Push Button, Momentary, 25 Amps
safety switcH
High capacity switch features silver contacts capable of
25 amps at 12 volts. Safety cover prevents accidental
engagement of switch and allows superfast shutdown
action.
PART NO.
PBSXL
PBSRTD
DESCRIPTION
Big Button
Small Button
PART NO.
16750
pusH Button starter switcH
remote starter switcH
Allows you to bump the starter over from under the
hood. Ideal for valvetrain adjustment work.
PART NO.
15030
Interior or Exterior protective neoprene cap.
Rated 60 amps @ 12V, 40 amps @24v.
APPLICATION
Push button starter switch
Push Button Switch with 6-ft stretch coil
PART NO.
6275
3006G
universal starter Button
Silver contacts for maximum current
capacity. Black weather boot protects the
switch from moisture and dust. Requires
5/8" mounting hole. Two screw type terminals connect switch to line.
PART NO.
16770
pusH Button starter switcH
Waterproof and dustproof with neoprene
cap for in-car or under hood mounting. 35
amp rated @12V.
APPLICATION
Push button starter switch
Universal momentary switch & cable
PART NO.
74120
74122
44
APPLICATION
Momentary - 15amp button & cord
PART NO.
37055
Plug directly into your factory coil and harness,
then 4 color coded wires plug into the corresponding wires of the
MSD ignition. Two wires go from the MSD to the battery and you’re
done. No cutting or splicing!
APPLICATION
Universal Wiring Harness
PART NO.
8873
HigH current relay
Ideal for use with the MSD RPM Activated Switch when 12
volts is responsible for activating a high current device.
APPLICATION
PART NO.
Single-Pole Double Throw 30 amp 12VDC
8961
transBraKe momentary
Spiral cord with microswitch (18 gauge). Stretches over 7 feet.
APPLICATION
Push Button Momentary w/Cord
PART NO.
388400
fuse BlocK
Each circuit on the block is labeled and
preterminated. Kit includes mounting bracket,
fuses, flashers, horn relay, terminal ends, and
step by step installation instructions.
APPLICATION
4 Circuit
7 Circuit Waterproof 4 Ign. hot/3 Constant Hot
musHroom cap remote
Button & cord
Rated at 12 amps. Works with 12 & 16 volt
systems. Lightweight spiral cord, self cleaning
contacts and bounce-free operation.
APPLICATION
Large Activator, Red Button w/Cord
complete cHassis
Harness assemBly
PART NO.
46013
The quick, easy and Painless way to
rewire just about any vehicle, whether a
’32 Ford or a ’78 Camaro.
APPLICATION
12 Circuit Universal - GM Keyed Column
12 Circuit Universal - Non-GM Keyed Column
18 Circuit Universal - GM Keyed Column
18 Circuit Universal - Non-GM Keyed Column
remote Button & cord
Rated at 12 amps works with 12 and 16
volt systems. Light weight spiral cord, self
cleaning contacts, bounce-free operation.
APPLICATION
Remote button & cord
PART NO.
30002
70207
PART NO.
10101
10102
10201
10202
PART NO.
46003
fuse BlocKs
APPLICATION
6-Circuit Terminal Block Kit
PART NO.
4455
stretcH cord
Super heavy duty stretch cords handle all
transbrake switches and solenoids.
Stretches more than 10 feet.
APPLICATION
Two 14-gauge conductors, Dark Blue
wiring Harness
PART NO.
SC-2
APPLICATION
3-Wire Mallory Electronic Distributors
PART NO.
29349
IGNITION & ELECTRICAL
wiring Harness
transBraKe Button
IGNITION & ELECTRICAL
45
electric fan relays
Inexpensive protection for your electric fan.
APPLICATION
Fan-Thom (without Thermostat)
Fan-Thom II (200 On/185 Off) w/Thermostat
Fan-Thom II (185 On/170 Off) w/Thermostat
PART NO.
30101
30102
30103
S16VL
universal fuel pump relay
16 volt agm racing Batteries
Prevents voltage drops at the pump
maintaining constant fuel pump pressure,
and prevents fuel pump amperage overloads from damaging the electrical system.
PART WEIGHT LxWxH DESCRIPTION RESERVE CRANK
COLD
NO.
(LBS) (INCHES)
CAP.
AMPS AT CRANK
(MIN.)
32°F
AMPS AT
0°F
16 volt
10.08
x
S16V
42
75
650
550
racing
6.39 x
battery (std.)
8.79
PART NO.
50102
custom cHassis
Harness assemBly
S16VL
Comes complete with fuses, flashers, horn
relay, tach lead, ballast resistor, maxi-fuse,
terminal ends, wire ties, grommets everything needed to do the job right.
APPLICATION
18 Circuit - 69-74 GM Muscle Car
S16V
32
10.08 x
6.39 x 6
16 volt
racing
battery
(light wt)
50
550
450
(*) 16 Volt AGM Series batteries require the use of charger type: AGM25A19V. TurboStart®
16 volt chargers purchased prior to 09/03 can be used with minor internal adjustments.
Detailed charger adjustment instructions for TurboStart® chargers are included with each
battery. S16V & S16VL types have a "Bolt in" terminal design. Included with the battery are
terminal bolts. All AGM battery types are shipped fully charged and ready for installation.
PART NO.
20102
AGM25A19V
16V-RES
race car Harness assemBly
Just mount the prewired fuse block,
route the wires and go.
Battery cHarger & accessories
DESCRIPTION
12 Circuit Race Harness, for spade fuses
PART NO.
PART NO.
50003
WEIGHT LxWxH DESCRIPTION
(LBS)
(INCHES)
INPUT
OUTPUT
AGM25A19V
25
10x8x6
25A automatic
charger for S16V
& S16VL
110V
25A 19.2V
16VRES
2
4x3x1
Voltage step
down- 2.5V drop
16.8V
14.3V
D1600
1004
XP1000
HF1615
Xs power agm racing Batteries
WEIGHT MOUNT
(LBS)
PART
NO
DIMENSIONS
VOLT
AMPERAGE
RATING
D925
6.5 L x 4.92 W
x 6.93 H
12V
550 CCA / Max
2000
23.55
Top
D1600 10.24 L x 6.4 W
x 7.2 H
16V
675 CCA / Max
2400
46
Top
PART NO
TYPE
VOLT
S1600 10.24 L x 6.75 W
x 7.2 H
16V
500 CCA / Max
2000
30.5
Top
HF1615
High Frequency Charger
16V
AMPERAGE
RATING
15 Amp
1004
Intellicharger
16V
20 Amp
XP1000 10.24 L x 6.4 W
x 7.2 H
16V
675 CCA / Max
2400
48.5
Top
1005
Intellicharger
12/16V
25 Amp
Battery cHargers
46
For top-post or side-post terminals. 10-1/2" deep,
13" wide, 9-1/2" tall. Fully approved for racing by
NHRA and IHRA. Battery cable not included.
5-pin relay
Double Pole-Double Throw, 30 AMP, 12 VDC, Nitrous
PART NO.
74050
PART NO.
16700
DESCRIPTION
Normal, Open/Closed, Relay & Connector
aluminum
Battery BoX Kits
NHRA Rule 8:1 compliant. Constructed of .040”
aluminum in a three piece design that allows battery
access without removing the battery from the box. Includes
3/8” bolts for mounting box securely to vehicle frame.
DESCRIPTION
Battery Box and hardware
Kit above plus 18' 2-gauge cable kit
PART NO.
48100
48101
16775
disconnect switcHes
16776
Heavy duty disconnect is designed to meet and/or exceed the
specifications of many sanctioning bodies.
PART NO.
16775
16776
APPLICATION
20 amp duty, 125 amp max,Vehicles w/o alternators
175 amp, 4 post, Vehicles w/alternators
Battery relocation Kit
Single trunk mount kit provides better weight
distribution for better traction and reduces engine
compartment clutter. All necessary hardware included.
DESCRIPTION
2-gauge wire
PART NO.
48000
polisHed aluminum Battery mount
Battery disconnect switcH
Electrical master cutoff switch for safety and
security. Rated capacity 100 amps 124 volts
continuous service.
PART NO.
R6323
R6325
DESCRIPTION
Optima, Yellow Top Battery Mount
Optima, Red Top 75/25, Battery Mount
PART NO.
1036
stainless steel Battery tray
PART NO.
R9323
DESCRIPTION
Battery Tray (Includes Hold Downs)
Battery BoX
12” x 6 3/4” x 10” high case and brackets,
20’ of 2-gauge stranded copper battery
cable, 4 lugs, a pair of cable ends and related
hardware. Trunk mounted installation kit.
PART NO.
6279
Battery caBle
20’ of 2-gauge stranded copper cable, two
terminal ends, crimpable lug ends, mounting
clamps, and attaching hardware.
PART NO.
6278
HigH current relay
Activate accessories that draw high current.
Double Pole. 30 Amp.
PART NO.
8960
IGNITION & ELECTRICAL
sealed Battery BoX
IGNITION & ELECTRICAL
47
Battery disconnect switcHes
Easy to install. Required by many sanctioning bodies.
DESCRIPTION
Vehicles without alternators
20 amps @ 6-36 volts DC
Vehicles with alternators
175 amps @ 6-36 volts DC
Super-Duty
Flush mount battery cable connectors
PART NO.
74100
74101
74102
74155
Battery disconnect switcH
PART NO.
74140
PART NO.
8162
8002
APPLICATION
Ford 100 amp chrome
Ford 100 amp chrome V-belt
Race Alternator, Ford 2GIC, 140 amp, black
65-77 Comet, 67-85 Cougar, 65-85 Mustang 65-85
Thunderbird, Black, 140 amp
Battery disconnect mounting Kit
Allows battery to be placed
anywhere in the car and still be
completely accessible for charging
between rounds. Universal for 6-36 volt
DC applications. 2 per pack.
DESCRIPTION
Denso 50 Amps, 5.6 lbs.
Delco Early style 100 amp, 8.24 lbs.
All units conform in size and appearance to the
original equipment manufacturing. Some will
have OEM markings such as “Motorcraft” on
Ford alternators.
PART NO.
74103
remote Battery
Jumper terminal
Powermaster’s racing alternators offer a true
one-wire hookup with a set voltage of 14.9. High
output-to-weight ratio with low drag, high speed bearings. Alternators come with a black heat dispersant coating.
muscle car alternators
new oem replacements
Disconnects the battery and saves the solid
state voltage regulator and alternator when
charging. Also deters possible car thieves
when parked. Switch is rated at 100 amps for
12V or 24V DC use.
APPLICATION
Push/Pull Battery Disconnect mounting kit
racing alternators
PART NO.
74105
cHrome alternator
APPLICATION
PART NO.
Ford, Mercury, Jeep 60 amp
17078
Buick/Olds/Pontiac/GMC 100 amp
17294
one wire natural finisH alternator
Same features as the Chrome Street Alternator
except with a natural finish.
APPLICATION
PART NO.
Buick, Corvette, Cavalier 140 amp
47294
Chevy/GMC/Olds/Pontiac 140 amp
47802
remote Jumper terminals
PART NO.
16780
cHrome oem alternator
1 wire, original equipment replacement.
APPLICATION
PART NO.
Chevy/GMC/Pontiac/Olds 105 amp 178021
one wire alternator
•
•
•
•
•
IN USA
Great looks
ASSEMBLED
One wire convenience
Premium chrome plating
High output capability
Brand new unit includes fan and
single groove pulley.
PART NO.
13600
13602
13610
APPLICATION
100 amp
140 amp
100 amp Serp belt pulley
pro series alternator mount Kits
PART NO.
8-881
8-897
DESCRIPTION
100 amp SBC Snug mount
100 amp BBC low mount
PART NO.
8-37100
8-37101
8-47140
8-57140
48
Mount and drive kits for use with electric
drive water pumps.
Designed to independently top or side-mount
your alternator, based on your application
and case size. They are also independently
adjustable without the use of sloppy adjuster
bars. Polished billet aluminum.
PART NO.
APPL
10420
SB Chevy
11420
10620
10120
IGNITION & ELECTRICAL
alternator BracKets
alternator BracKets
APPLICATION
SBF mounting bracket
DESCRIPTION
Side mount, use with SWP
and V-groove
SB Chevy
Std. Heads
Side mount, use with LWP
and V-groove
BB Chevy
Std. Heads
Side mount, use with SWP
3/8"
and V-groove
Alternator/Air Conditioning Bracket, High Center Mount,
Short Water Pump, Chevy, Sanden 508 AC
PART NO.
63810
HEADS
Std. Heads
alternator BracKet
SB Chevy low mount bracket
PART NO.
890
4954
4955
alternator fans
GM & Ford (Except Trucks)
cHrome alternator BracKets
DESCRIPTION
SBC 1969-86, Lower
BBC 1969-Up, Lower
SBC, OEM style, LWP
SBC, Hi Tech style, LWP
SBC, OEM style, LWP, 76-86
SBC Low mount
Side Mount Header Bracket, SB Chevy
SB Ford, OEM style 65-69
Alternator/Generator Arm
F-Style Alternator Bracket
Alternator Spacer Tube, Universal
PART NO.
4954
4955
5171
5176
5170
5179
9852
5185
9851
9850
9853
R9321
APPLICATION
PART NO.
Polished Aluminum
R8867
Chrome Steel (includes single groove pulley)
R9446
service parts - 13500 starter
PART NO.
13500P
13500S
13500SK
APPLICATION
Starter Drive for 135000, 135010, 13502
Solenoid for 135000, 13502
Shim and fastener kit for 135000, 135010, and 13502
starter Heat sHield wrap
cHrome alternator BracKets
APPLICATION
SB Chevy 305-350 1969-75 LWP, OEM Style
SB Chevy 305-350 1976-86 LWP, OEM Style
BB Chevy 396-454 1969-up LWP, OEM Style
SB Chevy 305-350 1969-75 LWP, Custom
SB Chevy 305-350 1976-86 LWP, Custom
SB Chevy 283-350, 55-68, Low Mount - Left Side
SB Chevy 1969-86, 305-350
BB Chevy 396-454, 65-68 SWP Bottom Alt Bracket OEM Style
BB Chevy 396-454 1969-up LWP, OEM Style, Lower
BB Chevy 396-454, 65-68, SWP Top Alternator Bracket
- OEM Style
SB Chevy - LWP (Includes Hardware)
Chrome 1965-73 Ford 289-302 - OEM Style
Universal, 1-inch Wide x 14-inch Long with 4-inch Slot
R8867
Universal Size, Fits OE and Mini-Starters, Aluminized.
PART NO.
R9316
R9317
R9318
R9320
R9321
R9316
R9637
R9502
R9638
R9581
R6402
R9455
R9079
PART NO.
13515
starter sHield
Designed to protect Delco starters against
damaging heat from headers or exhaust manifolds. Useful on race engines, tow vehicles,
SUVs and RVs. Fits Delco starters used on
Chevy SB and BB engines.
PART NO.
13516
starter wiring Harness
PART NO.
13510
IGNITION & ELECTRICAL
49
powermaX mini starter
ultratorque starters
Handles engines with compression ratios as high
as 11.0:1. If stock starter clears your oil pan, the
Powermaster PowerMax starter will too.
ULTRAtorque is the STRONGEST
STARTER available in the performance
automotive industry, featuring 250+ ft.
lbs of torque and 2.5+ Kw. Several
mounting configurations available.
APPLICATION
Chevy L6-V8, Inline, 160 ft.-lbs. of torque
PART NO.
9100
DESCRIPTION
153/168 tooth Chevy
SB Ford 289, 302, 351
Automatic and 5 speed transmission
BB Ford 351M, 400, 429, 460
PART NO.
9400
9403
9405
mastertorque starters
APPLICATION
Remanufactured 9000
SBC, (New), Inline, Black, Mastertorque
PART NO.
9000X
9000
oem style HigH torque starters
Full size.
APPLICATION
Ford SB 289, 302, 351 W/C, Auto & 5 Spd Manual
Chevy Ram Jet 350, 502, 168T Flywheel
PART NO.
9162
9200
Xs torque starters
Highest torque. 4.4:1 gear reduction
ratio. Cranking power for up to 18:1
compression. Weight is 8.0 lbs.
DESCRIPTION
Chevy 168 Tooth Flywheel
Chevy 153 Tooth Flywheel
Chevy 3 bolt staggered
Ford 289-302-351W Auto and 5 Speed Manual
(3/4" Offset)*
PART NO.
9500
9502
9526
9503
Ford 351M, 400, 429, 460
Ford 390-427-428 “FE” Only
Pontiac/Oldsmobile
Mopar V8
Bert/Brinn Transmission
9505
9506
9510
9513
9514
*Offset is the distance from the mounting surface of the starter to the
engine side of the ring gear.
mastertorque starters
Five position indexing. Clears oil
pans where OE starter will work.
Billet aluminum adapter block. Cranking power for
up to 12:1 compression. Mounting bolts included.
denso style torque starter
•
•
•
•
•
135250
Lightweight, only 10 lbs.
13:1 compression
3.70:1 to 4.40:1 gear ratio
Ideal for high compression and big CI applications
Adjustable mounting block
HitacHi style racing starter
•
•
•
•
DESCRIPTION
Chevy 153 or 168 Tooth Flywheel
Ford 289-302-351 Auto and 5 Speed Manual
Chevy 3 bolt staggered
135020
starter replacement parts
Lightweight, only 10 pounds
Draws half the amps of a factory starter
Provides high torque starting capabilities
needed for a performance engine
18:1 compression
PART
135250
135300
135000
135030
135020
135010
13502
135280
135290
APPLICATION
Pinion, Hitachi 9 tooth
11 tooth pinion for XS Torque,
Mastertorque
MAKE TORQUE
STYLE COMP
BOLT
FINISH
Chevy
Chevy
Chevy
Chevy
Chevy
Chevy
Chevy
Ford
Ford
Denso
Denso
Hitachi
Hitachi
Hitachi
Hitachi
Hitachi
Denso
Denso
Std
Stag
Std
Stag
Std
Std
Std
Auto 3
Man 3
Natural
Natural
Natural
Natural
Natural
Chrome
Natural
Natural
Natural
Street/Strip
Race
Street
Street/Strip
High
High
Race
Street/Strip
Street/Strip
13:1
18:1
9:1
13:1
15:1
15:1
18:1
13:1
13:1
PART NO.
603
604
aps starter
Mini, Inline, Red Powdercoated, Maximum
Recommended Compression Ratio:17.0:1,
Gear Reduction Ratio: 4.40:1, 3 HP Motor
PART NO.
5095
APPLICATION
SB/BB Chevy
PART NO.
9600
9603
9612