Sharp XL-DH350NH Specifications

MIKRO KOMPONENTEN SYSTEM
MICRO-CHAÎNE
SISTEMA MICRO
MIKRO KOMPONENT SYSTEM
MICRO SISTEMI
MICRO SYSTEEM
SISTEMA DE MICRO COMPONENTE
MIKROKOMPONENTTIJÄRJESTELMÄ
MICRO COMPONENT SYSTEM
MODELL
MODÈLE
MODELO
MODELL
MODELLO
XL-DH320NH
XL-DH350NH
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE MANEJO
BRUKSANVISNING
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE OPERAÇÃO
KÄYTTÖOHJE
OPERATION MANUAL
XL-DH320NH
XL-DH350NH
CD
USB
CD
USB
MICR
T
NEN
MPO
O C O XL-DH320
SYST
EM
MICR
T
NEN
MPO
O C O XL-DH350
SYST
EM
iPod is a trademark of Apple Inc., registered in the
U.S. and other countries.
DEUTSCH
FRANÇAIS
ESPAÑOL
SVENSKA
ITALIANO
NEDERLANDS
PORTUGUÊS
SUOMI
ENGLISH
04/1/28
MODEL
MODELO
MALLI
MODEL
Siehe Seiten i bis viii und D-1 bis D-22.
Se reporter aux pages i à viii et F-1 à F-22.
Consulte las páginas i a viii y S-1 a S-22.
Hänvisa till sidorna i till viii och V-1 till V-22.
Leggere le pagine i a viii e I-1 a I-22.
Raadpleeg de bladzijden i t/m viii en N-1 t/m N-22.
Favor consultar as páginas i a viii e P-1 a P-22.
Sivut i - viii sekä SU-1 - SU-22.
Please refer to pages i to viii and E-1 to E-22.
XL-DH320N 350NH EN_Front
BESONDERE ANMERKUNGEN
REMARQUES SPÉCIALES
NOTAS ESPECIALES
SÄRSKILDA ANMÄRKNINGAR
NOTE PARTICOLARI
BIJZONDERE OPMERKINGEN
NOTAS ESPECIAIS
ERITYISHUOMAUTUS
SPECIAL NOTES
● Quando il tasto ON/STAND-BY si trova in posizione STAND-BY,
all’interno dell’apparecchio c’è ancora la corrente.
Se il tasto ON/STAND-BY si trova nella posizione STAND-BY,
l’unità può essere accesa con il modo timer o con il telecomando.
Avvertenza:
L’apparecchio non contiene parti riparabili dall’utente. Non togliere
mai i coperchi, a meno di non essere qualificati per farlo. All’interno
dell’apparecchio ci sono tensioni pericolose, per cui si deve sempre
staccare la spina del cavo d’alimentazione dalla presa di corrente
prima di qualsiasi intervento di manutenzione e quando non si usa
l’apparecchio per un lungo periodo di tempo.
● Dichiarazione di conformità
La società SHARP ELECTRONICS EUROPE GmbH dichiara che
il prodotto SHARP MICRO SISTEMI XL-DH320NH / XL-DH350NH
è costruito in conformità alle prescrizioni del D.M.no 548 del 28/8/
95, pubblicato sulla G.U.no 301 del 28/12/95 ed in particolare è
conforme a quanto indicato nell’art. 2, comma 1 dello stesso
decreto.
● Wanneer de ON/STAND-BY toets in de STAND-BY stand staat,
loopt er nog steeds stroom (netspanning) in het toestel.
Wanneer de ON/STAND-BY toets in de STAND-BY stand staat,
kan het toestel ingeschakeld worden via de timerfunctie of de
afstandsbediening.
Waarschuwing:
Dit toestel bevat geen door de gebruiker te repareren onderdelen.
Verwijder de behuizing nooit tenzij u deskundig bent op dit gebied.
In het toestel loopt een gevaarlijke spanning; haal de stekker altijd
uit het stopcontact alvorens onderhoud uit te voeren of wanneer het
toestel voor langere tijd niet gebruikt wordt.
● Bei Einstellung der ON/STAND-BY-Taste auf STAND-BY ist die
Netzspannung immer noch im Gerät vorhanden.
Wenn die ON/STAND-BY-Taste auf STAND-BY eingestellt wird,
kann das Gerät unter Verwendung der Timer-Betriebsart oder
Fernbedienung in Betrieb gesetzt werden.
Warnung:
In diesem Gerät sind keine vom Benutzer wartbaren Teile
vorhanden. Niemals Abdeckungen entfernen, außer wenn Sie
dafür qualifiziert sind. In diesem Gerät sind gefährliche
Spannungen vorhanden. Vor Ausführung von irgendwelchen
Kundendienstarbeiten oder bei längerer Nichtverwendung des
Gerätes stets den Netzstecker aus der Netzsteckdose ziehen.
● Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, a voltagem de alimentação ainda se encontra
presente dentro do aparelho.
Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, o aparelho pode ser colocado em operação através do
modo de programação horária ou pelo controle remoto.
Advertência:
Neste aparelho não há partes que podem ser consertadas pelo
usuário. Nunca retire a tampa, a menos que você tenha
qualificação para tal. Este aparelho contém voltagens perigosas.
Remova sempre o cabo de alimentação da tomada antes de
efetuar qualquer conserto ou quando deixar o aparelho muito
tempo fora de uso.
● Lorsque la touche ON/STAND-BY est mise en STAND-BY,
l’appareil est toujours sous tension.
Lorsque la touche ON/STAND-BY se trouve sur la position
STAND-BY, l’appareil est prêt à fonctionner par la minuterie ou la
télécommande.
Avertissement:
Cet appareil contient des pièces non réparables par l’utilisateur.
Personne non qualifiée n’enlèvera jamais les couvercles.
L’appareil contenant des organes portés à haute tension,
débrancher l’appareil avant toute réparation ou en période de nonutilisation.
● Kun ON/STAND-BY -kytkin on STAND-BY-asennossa, laitteessa
on yhä virta.
Kun ON/STAND-BY -kytkin on STAND-BY-asennossa, laite
voidaan kytkeä päälle kaukosäätimestä.
Varoitus:
Laitteen sisällä ei ole käyttäjän huollettavissa olevia osia. Kotelon
saa irrottaa vain siihen pätevöitynyt henkilö. Laitteen sisällä on
vaarallinen jännite. Laite on aina irrotettava verkkovirrasta ennen
huoltotoimenpiteitä ja jos laite on pitkään käyttämättä.
● Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, todavía hay tensión dentro del aparato.
Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, el aparato puede ponerse en funcionamiento
utilizando el modo del temporizador o el controlador remoto.
Advertencia:
Tenga en cuenta que dentro de este aparato no hay piezas que
pueda reparar. No quite nunca las tapas a menos que se esté
cualificado para hacerlo. Este aparato tiene en su interior tensiones
peligrosas. Desenchufe siempre la clavija de la red del
tomacorriente antes de realizar cusalquier servicio de
mantenimiento y cuando no se use el aparato durante un largo
período de tiempo.
● When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY position, the
unit may be brought into operation by the timer mode or remote
control.
Warning:
This unit contains no user serviceable parts. Never remove covers
unless qualified to do so. This unit contains dangerous voltages,
always remove mains plug from the socket before any service
operation and when not in use for a long period.
● När ON/STAND-BY knappen är i läge STAND-BY, finns
● Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der
nätspänning i apparaten.
Med ON/STAND-BY knappen i läge STAND-BY kan apparaten
startas med timerfunktion eller fjärrkontrollen.
Varning:
Apparaten innehåller inga delar som kan åtgärdas av kunden.
Höljet får endast öppnas av kvalificerad personal. Apparaten
innehåller farliga spänningar. Stickkontakten ska därför dras ut från
nätuttaget före reparationsarbeten och bör dras ut om apparaten
inte ska användas på mycket länge.
stadig netspaending til stede i apparatet.
Når ON/STAND-BY-knappen er sat i STAND-BY position, kan
apparatet startes v.hj.a. timer-funksionen eller fjernbetjeningen.
Advarsel:
Apparatet indeholder ingen dele, der kan repareres af brugeren
selv. Fjern aldrig kabinettet med mindre De er kvalificeret hertil.
Apparatet indeholder farlig strømspaending. Traek altid stikket ud af
stikkontakten før der foretages reparationer, eller hvis apparatet
ikke er i brug i laengere tid.
i
XL-DH320N 350NH_com.fm
2009 July16
● Vorsicht:
●
DENNA APPARAT ÄR ANSLUTEN TILL 230 V
VÄXELSTRÖM
NÄR
STICKPROPPEN
ÄR
INSKJUTEN I VÄGGUTTAGET. FÖR ATT
FULLSTÄNDIGT KOPPLA IFRÅN APPARATEN,
V.G. DRAG UT STICKPROPPEN.
●
● Audio-visuelles
●
●
●
●
●
●
●
●
Material kann Urheberrechte
umfassen, die ohne Genehmigung des Eigentümers
dieser Urheberrechte nicht aufgenommen werden
dürfen. Siehe die entsprechenden nationalen
Gesetze.
Le matériel audio-visuel peut comporter des oeuvres
faisant l’objet de droits d’auteur qui ne peuvent être
enregistrées sans l’autorisation du possesseur du
droit d’auteur, veuillez vous référer aux
réglementations nationales en vigueur.
El material audiovisual puede consistir en trabajos
que tengan derechos de autor y que no deben
grabarse sin la autorización del poseedor de dichos
derechos de autor. Sírvase consultar las leyes
aplicables en su país.
Audiovisuellt
material
kan
innehålla
upphovsrättsarbete som inte skall mångfaldigas utan
tillstånd av copyrightinnehavaren. Se den tillämpliga
lagen i ditt land.
Il materiale audio-visivo che fosse soggetto a
copyright non può essere registrato senza
l’autorizzazione del possessore del copyright. Si
prega di attenersi alle leggi in vigore sul territorio
nazionale.
Audio-visueel materiaal kan worden beschermd door
auteursrechten, in welk geval het niet mag worden
opgenomen zonder de toestemming van de
auteursrechthouder. Zie voor nadere informatie de
betreffende wetten in het land van gebruik.
O material audiovisual pode consistir de trabalhos de
direitos autorias que não devem ser gravados sem
autorização do proprietário dos direitos. Favor
consultar as leis vigentes em seu país.
Audiovisuaalinen
materiaali
saattaa
olla
tekijänoikeudella suojattua, eikä sitä tällöin saa
tallentaa ilman tekijänoikeuden haltijan lupaa.
Lisätietoja
on
maassasi
sovellettavassa
tekijänoikeuslaissa.
Audio-visual material may consist of copyrighted
works which must not be recorded without the
authority of the owner of the copyright. Please refer
to relevant law in your country.
●
●
●
●
●
●
Das Gerät weder Tropf- noch Spritzwasser
aussetzen. Ansonsten besteht die Gefahr eines
Brandes oder elektrischen Schlages. Es dürfen keine
mit Flüssigkeiten gefüllten Gegenstände wie Vasen
auf dem Gerät abgestellt werden.
Attention:
Pour éviter un incendie ou une secousse électrique,
mettre l’appareil à l’abri de l’eau (éclaboussure,
goutte). Ne pas poser sur l’appareil un récipient
contenant du liquide.
Advertencia:
Para evitar incendios y descargas eléctricas, no
exponga el aparato a goteo o salpicadura de líquidos.
No deberán ponerse encima del aparato objetos que
estén llenos de líquido, como por ejemplo un florero.
Varning:
Utsätt inte enheten för dropp eller stänk för att
förhindra brand eller elektriska stötar. Inga
vätskefyllda föremål såsom vaser får placeras på
enheten.
Attenzione:
Per prevenire incendi o scosse elettriche, non fare
gocciolare nessun liquido sull’apparecchio e non
bagnarlo. Non collocarvi sopra nessun oggetto
riempito d’acqua, come per esempio vasi.
Waarschuwing:
Stel het toestel niet bloot aan druipend of spattend
water om brand en elektrische schokken te
voorkomen. Met vloeistoffen gevulde voorwerpen,
zoals vazen, mogen niet op het toestel geplaatst
worden.
Cuidado:
Para evitar incêndio ou choque elétrico, não exponha
este aparelho a gotejamento ou salpicamento de
água. Não coloque objetos com água como, por
exemplo, um vaso de flores, em cima do aparelho.
Varoitus:
Tulipalon tai sähköiskun välttämiseksi laitetta ei saa
altistaa tippuvalle tai roiskuvalle vedelle. Nestettä
sisältäviä astioita kuten esim kukkamaljakoita ei saa
asettaa laitteen päälle.
Warning:
To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the
apparatus.
ii
XL-DH320N 350NH_com.fm
2009 July16
● Advarsel:
● VORSICHT
Til at forbygge ild og stød risiko, lad vaere med at
undsaette denne indretning for drypning eller
overstaenkning. Der må ikke anbringes nogen
genstande fyldt med vand, som for eksempel vaser,
på dette apparat.
Dieses
Gerät
enthält
eine
SchwachstromLasereinheit. Um die sichere Funktionsweise des
Gerätes
zu
gewährleisten,
sollten
keine
Abdeckungen entfernt oder auf innen liegende Teile
zugegriffen werden.
Das Gerät sollte nur von qualifiziertem Personal
gewartet und repariert werden.
● Advarsel:
For å unngå brann eller kortslutning, utsett ikke
produktet for vann eller fuktighet. Gjenstander som
inneholder vaeske, feks. en blomstervase, må ikke
plasseres oppå apparatet.
● ATTENTION
Ce produit contient un laser de faible puissance. Pour
assurer la sécurité, éviter d'ôter l'enveloppe ou
d'accéder à l'intérieur de ce produit.
Pour toute réparation, s'adresser à une personne
qualifiée.
● Varoitus:
Älä vie laitetta sateeseen tai kosteisiin tiloihin. Jos
laite on kostunut, anna sen kuivua ennen kuin käytät
sitä verkkovirralla. Nestettä sisältäviä astioita kuten
esim. kukkamaljakoita ei saa asettaa laitteen päälle.
● PRECAUCIÓN
Este producto contiene un dispositivo de láser de
poca potencia. Para mantener la seguridad, no
extraiga ninguna cubierta ni intente acceder al interior
del producto.
Solicite todo el servicio técnico a una persona
cualificada.
● VARNING
Denna produkt innehåller en lågeffektslaser-enhet.
För att säkra fortsatt säkerhet avlägsna inte något
hölje och försök inte komma åt produktens inre.
Vänd dig till behörig personal för all form av
servicearbete.
● Dieses Produkt ist ein Laserprodukt der Klasse 1.
● ATTENZIONE
● Ce produit est classifié comme étant un LASER DE
●
●
●
●
●
●
●
Questo prodotto contiene un dispositivo laser a bassa
potenza. Per garantire la sicurezza non rimuovere
alcuna copertura né tentare di accedere all’interno
del prodotto.
Per qualunque manutenzione, rivolgersi a personale
qualificato.
CLASSE 1.
Este producto está clasificado como un PRODUCTO
LÁSER DE CLASE 1.
Denna produkt klassificeras som KLASS 1
LASERPRODUKT.
Questo prodotto è classificato come CLASS 1 LASER
PRODUCT.
Dit product is geclassificeerd als een KLASSE 1
LASER PRODUCT.
Este produto é classificado como PRODUTO LASER
DE CLASSE 1.
Tämä
laite
on
luokiteltu
LUOKAN
1
LASERLAITTEEKSI.
This product is classified as a CLASS 1 LASER
PRODUCT.
● LET OP
Dit product bevat een lasertoestel met een laag
vermogen. Zorg ervoor dat de veiligheid
gewaarborgd blijft, verwijder niet een deel van de
behuizing en probeer niet door te dringen tot het
binnenwerk van het product.
Laat alle onderhoudswerkzaamheden over aan
gekwalificeerde vakmensen.
● CUIDADO
Este produto contém um aparelho laser de baixa
potência. Para garantir a segurança contínua não
remover qualquer tampa ou tente obter acesso ao
interior do produto.
Consultar os serviços de pessoal qualificado.
Dette produktet er klassifisert som et KLASSE 1
LASERPRODUKT.
Dette produkt er klassificeret som et KLASSE 1
LASERPRODUKT.
Tämä laite on luokiteltu LUOKAN 1 LASERLAITTEEKSI.
● VAARA
Tuotteessa
on
matalatehoinen
laserlaite.
Käyttöturvallisuuden takaamiseksi koteloa ei saa
irrottaa eikä laitteen sisäosiin tule koskea.
Laitteen
saa
huoltaa
vain
valtuutettu
huoltohenkilöstö.
Denna produkt klassificeras som KLASS 1
LASERAPPARAT.
● CAUTION
This product contains a low power laser device. To
ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
iii
XL-DH320N 350NH_com.fm
2009 July16
„Made for iPod“ bedeutet, dass ein elektronisches
Zubehörteil speziell für den Anschluss an ein iPod
konzipiert wurde und der Entwickler dafür garantiert,
dass das Gerät den Leistungsstandards von Apple
entspricht.
« Made for iPod » signifie qu’un accessoire électronique
a été conçu pour se connecter spécifiquement à un iPod
et a été certifié par le développeur comme correspondant
aux standards de performance d'Apple.
“Made for iPod” significa que se ha diseñado un
accesorio electrónico para conectar específicamente al
iPod y ha sido certificado por el fabricante para cumplir
con las normas de rendimiento de Apple.
”Made for iPod” betyder att ett elektroniskt tillbehör har
designats för att kopplas specifikt till en iPod och har
certifierats av tillverkaren för att uppfylla Apples
prestandanormer.
“Made for iPod” significa che un accessorio elettronico è
stato progettato per essere specificamente collegato
iPod; inoltre, il produttore ne ha certificato la conformità
agli standard di funzionamento Apple.
"Made for iPod" betekent dat een elektronisch accessoire
specifiek is ontworpen voor aansluiting op de iPod en dat
de ontwikkelaar garandeert dat voldaan wordt aan de
eisen die Apple stelt aan het functioneren ervan.
A indicação “Made for iPod” significa que um acessório
electrónico foi concebido para ligar-se especificamente
ao iPod e foi certificado pelo fabricante para satisfazer os
padrões de desempenho da Apple.
”Made for iPod” tarkoittaa sitä, että elektroninen lisälaite
on suunniteltu nimenomaisesti iPod. Valmistaja on
sertifioinut laitteen niin, että se vastaa Applen
standardeja.
“Made for iPod” means that an electronic accessory has
been designed to connect specifically to iPod and has
been certified by the developer to meet Apple
performance standards.
iv
XL-DH320N 350NH_com.fm
2009 July16
Informations sur la mise au rebut correcte
Apple ist nicht verantwortlich für den Betrieb dieses
Gerätes oder dafür, dass es Sicherheits- und
Regulierungsstandards einhält.
Apple n'est pas responsable de la manière de faire
fonctionner cet appareil ni de sa conformité avec les
standards de sécurité et de réglementation.
Apple no se responsabiliza por el funcionamiento de este
dispositivo o por su cumplimiento con las normas de
seguridad y regulatorias.
Apple ansvarar inte för användning av denna apparat
eller dess överensstämmelse med säkerhetsnormer och
föreskrifter.
Apple non si ritiene responsabile circa il funzionamento
del presente dispositivo o la sua conformità con gli
standard normativi e relativi alla sicurezza.
Apple is niet verantwoordelijk voor de werking van dit
apparaat of zijn naleving aan veiligheids- en
regelgevende maatstaven.
A Apple não é responsável pelo funcionamento deste
aparelho ou pelo cumprimento das normas de segurança
e regulamentares.
Apple ei ole vastuussa laitteen toiminnasta tai sen
yhdenmukaisuudesta turvallisuus- ja
sääntelystandardien kanssa.
Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards.
A.
Attention :
votre produit
comporte ce
symbole. Il
signifie que les
produits
électriques et
électroniques
usagés ne
doivent pas
être mélangés
avec les
déchets
ménagers
généraux. Un
système de
collecte
séparé est
prévu pour ces
produits.
Entsorgungsinformationen
A. Entsorgungsinformationen
für
Benutzer
aus
Privathaushalten
1. In der Europäischen Union
Achtung: Ihr
Produkt trägt
dieses Symbol.
Es besagt,
dass Elektround
Elektronikgeräte nicht mit
dem
Haushaltsmüll
entsorgt,
sondern einem
getrennten
Rücknahmesystem
zugeführt
werden sollten.
Informations sur la mise au rebut à l'intention des
utilisateurs privés (ménages)
1. Au sein de l'Union européenne
Achtung: Werfen Sie dieses Gerät zur Entsorgung bitte nicht in den
normalen Hausmüll!
Gemäß einer neuen EU-Richtlinie, die die ordnungsgemäße
Rücknahme, Behandlung und Verwertung von gebrauchten Elektround Elektronikgeräten vorschreibt, müssen elektrische und
elektronische Altgeräte getrennt entsorgt werden.
Nach der Einführung der Richtlinie in den EU-Mitgliedstaaten
können Privathaushalte ihre gebrauchten Elektro- und
Elektronikgeräte
nun
kostenlos
an
ausgewiesenen
Rücknahmestellen abgeben*.
In einigen Ländern* können Sie Altgeräte u.U. auch kostenlos bei
Ihrem Fachhändler abgeben, wenn Sie ein vergleichbares neues
Gerät kaufen.
*) Weitere Einzelheiten erhalten Sie von Ihrer Gemeindeverwaltung.
Wenn Ihre gebrauchten Elektro- und Elektronikgeräte Batterien oder
Akkus enthalten, sollten diese vorher entnommen und gemäß örtlich
geltenden Regelungen getrennt entsorgt werden.
Durch die ordnungsgemäße Entsorgung tragen Sie dazu bei, dass
Altgeräte angemessen gesammelt, behandelt und verwertet
werden. Dies verhindert mögliche schädliche Auswirkungen auf
Umwelt und Gesundheit durch eine unsachgemäße Entsorgung.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung nach dem
ordnungsgemäßen Verfahren zur Entsorgung dieses Geräts.
Für die Schweiz: Gebrauchte Elektro- und Elektronikgeräte können
kostenlos beim Händler abgegeben werden, auch wenn Sie kein
neues Produkt kaufen. Weitere Rücknahmesysteme finden Sie auf
der Homepage von www.swico.ch oder www.sens.ch.
B. Entsorgungsinformationen für gewerbliche Nutzer
1. In der Europäischen Union
Wenn Sie dieses Produkt für gewerbliche Zwecke genutzt haben
und nun entsorgen möchten:
Bitte wenden Sie sich an Ihren SHARP Fachhändler, der Sie über
die Rücknahme des Produkts informieren kann. Möglicherweise
müssen Sie die Kosten für die Rücknahme und Verwertung tragen.
Kleine Produkte (und kleine Mengen) können möglicherweise bei
Ihrer örtlichen Rücknahmestelle abgegeben werden.
Für Spanien: Bitte wenden Sie sich an das vorhandene
Rücknahmesystem oder Ihre Gemeindeverwaltung, wenn Sie
Fragen zur Rücknahme Ihrer Altgeräte haben.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung nach dem
ordnungsgemäßen Verfahren zur Entsorgung dieses Geräts.
Attention : si vous souhaitez mettre cet appareil au rebut, ne le jetez
pas dans une poubelle ordinaire!
Les appareils électriques et électroniques usagés doivent être
traités séparément et conformément aux lois en vigueur en matière
de traitement, de récupération et de recyclage adéquats de ces
appareils.
Suite à la mise en oeuvre de ces dispositions dans les Etats
membres, les ménages résidant au sein de l'Union européenne
peuvent désormais ramener gratuitement* leurs appareils
électriques et électroniques usagés sur des sites de collecte
désignés.
Dans certains pays*, votre détaillant reprendra également
gratuitement votre ancien produit si vous achetez un produit neuf
similaire.
*) Veuillez contacter votre administration locale pour plus de
renseignements.
Si votre appareil électrique ou électronique usagé comporte des
piles ou des accumulateurs, veuillez les mettre séparément et
préalablement au rebut conformément à la législation locale en
vigueur.
En veillant à la mise au rebut correcte de ce produit, vous
contribuerez à assurer le traitement, la récupération et le recyclage
nécessaires de ces déchets, et préviendrez ainsi les effets néfastes
potentiels de leur mauvaise gestion sur l'environnement et la santé
humaine.
2. Pays hors de l'Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez contacter votre
administration locale qui vous renseignera sur la méthode
d'élimination correcte de cet appareil.
Suisse : les équipements électriques ou électroniques usagés
peuvent être ramenés gratuitement au détaillant, même si vous
n'achetez pas un nouvel appareil. Pour obtenir la liste des autres
sites de collecte, veuillez vous reporter à la page d'accueil du site
www.swico.ch ou www.sens.ch.
B. Informations sur la mise au rebut à l'intention des
entreprises
1. Au sein de l'Union européenne
Si ce produit est utilisé dans le cadre des activités de votre
entreprise et que vous souhaitiez le mettre au rebut:
Veuillez contacter votre revendeur SHARP qui vous informera des
conditions de reprise du produit. Les frais de reprise et de recyclage
pourront vous être facturés. Les produits de petite taille (et en petites
quantités) pourront être repris par vos organisations de collecte
locales.
Espagne: veuillez contacter l'organisation de collecte existante ou
votre administration locale pour les modalités de reprise de vos
produits usagés.
2. Pays hors de l'Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez contacter votre
administration locale qui vous renseignera sur la méthode
d'élimination correcte de cet appareil.
v
XL-DH320N 350NH_com.fm
2009 July16
Información sobre la eliminación
Informazioni per un corretto smaltimento
Información sobre eliminación para usuarios particulares
En la Unión Europea
Atención: si quiere desechar este equipo, ¡por favor no utilice el cubo de
la basura habitual!
Los equipos eléctricos y electrónicos usados deberían tratarse por
separado de acuerdo con la legislación que requiere un tratamiento, una
recuperación y un reciclaje adecuados de los equipos eléctricos y
electrónicos usados.
Tras la puesta en práctica por parte de los estados miembros, los
Atención: su hogares de particulares dentro de los estados de la Unión Europea
producto está pueden devolver sus equipos eléctricos y electrónicos a los centros de
marcado con recogida designados sin coste alguno *.
En algunos países* es posible que también su vendedor local se lleve su
este símbolo. viejo producto sin coste alguno si Ud. compra uno nuevo similar.
Significa que *) Por favor, póngase en contacto con su autoridad local para obtener
los productos
más detalles.
Si sus equipos eléctricos o electrónicos usados tienen pilas o
eléctricos y
acumuladores,
por favor deséchelos por separado con antelación según
electrónicos
los requisitos locales.
usados no
Al desechar este producto correctamente, ayudará a asegurar que los
deberían
residuos reciban el tratamiento, la recuperación y el reciclaje necesarios,
mezclarse con previniendo de esta forma posibles efectos negativos en el medio
los residuos
ambiente y la salud humana que de otra forma podrían producirse
debido a una manipulación de residuos inapropiada.
domésticos
2. En otros países fuera de la Unión Europea
generales.
Si desea desechar este producto, por favor póngase en contacto con las
Existe un
autoridades locales y pregunte por el método de eliminación correcto.
sistema de
Para Suiza: Los equipos eléctricos o electrónicos pueden devolverse al
recogida
vendedor sin coste alguno, incluso si no compra ningún nuevo producto.
independiente Se puede encontrar una lista de otros centros de recogida en la página
principal de www.swico.ch o www.sens.ch.
para estos
B. Información sobre Eliminación para empresas usuarias
productos.
1. En la Unión Europea
Si el producto se utiliza en una empresa y quiere desecharlo:
Por favor póngase en contacto con su distribuidor SHARP, quien le
informará sobre la recogida del producto. Puede ser que le cobren los
costes de recogida y reciclaje. Puede ser que los productos de tamaño
pequeño (y las cantidades pequeñas) sean recogidos por sus centros de
recogida locales.
Para España: por favor, póngase en contacto con el sistema de recogida
establecido o con las autoridades locales para la recogida de los
productos usados.
2. En otros países fuera de la Unión Europea
Si desea desechar este producto, por favor póngase en contacto con sus
autoridades locales y pregunte por el método de eliminación correcto.
A.
1.
Informazioni sullo smaltimento per gli utenti (privati)
Nell'Unione europea
Attenzione: Per smaltire il presente dispositivo, non utilizzare il normale
bidone della spazzatura!
Le apparecchiature elettriche ed elettroniche usate devono essere
gestite a parte e in conformità alla legislazione che richiede il
trattamento, il recupero e il riciclaggio adeguato dei suddetti prodotti.
In seguito alle disposizioni attuate dagli Stati membri, i privati residenti
nella UE possono conferire gratuitamente le apparecchiature elettriche
ed elettroniche usate a centri di raccolta designati*.
In alcuni paesi*, anche il rivenditore locale può ritirare gratuitamente il
vecchio prodotto se l'utente acquista un altro nuovo di tipologia simile.
*) Per maggiori informazioni si prega di contattare l'autorità locale
competente.
Se le apparecchiature elettriche o elettroniche usate hanno batterie o
accumulatori, l'utente dovrà smaltirli a parte preventivamente in
conformità alle disposizioni locali.
Lo smaltimento corretto del presente prodotto contribuirà a garantire
che i rifiuti siano sottoposti al trattamento, al recupero e al riciclaggio
necessari prevenendone il potenziale impatto negativo sull'ambiente e
sulla salute umana, che potrebbe derivare da un'inadeguata gestione
dei rifiuti.
2. In paesi che non fanno parte dell'UE
Se si desidera eliminare il presente prodotto, contattare le autorità
locali e informarsi sul metodo di smaltimento corretto.
Per la Svizzera: Le apparecchiature elettriche o elettroniche usate
possono essere restituite gratuitamente al rivenditore, anche se non si
acquista un prodotto nuovo. Altri centri di raccolta sono elencati sulle
homepage di www.swico.ch o di www.sens.ch.
B. Informazioni sullo smaltimento per gli utenti commerciali
1. Nell'Unione europea
Se il prodotto è impiegato a scopi commerciali, procedere come segue
per eliminarlo.
Contattare il proprio rivenditore SHARP che fornirà informazioni circa il
ritiro del prodotto. Potrebbero essere addebitate le spese di ritiro e
riciclaggio. Prodotti piccoli (e quantitativi ridotti) potranno essere ritirati
anche dai centri di raccolta locali.
Per la Spagna: Contattare il sistema di raccolta ufficiale o l'ente locale
preposto al ritiro dei prodotti usati.
2. In paesi che non fanno parte dell'UE
Se si desidera eliminare il presente prodotto, contattare le autorità
locali e informarsi sul metodo di smaltimento corretto.
A.
1.
Attenzione: Il
dispositivo è
contrassegnato
da questo
simbolo, che
segnala di non
smaltire le
apparecchiature
elettriche ed
elettroniche
insieme ai
normali rifiuti
domestici. Per tali
prodotti è previsto
un sistema di
raccolta a parte.
Informatie over verantwoorde verwijdering
Informatie over afvalverwijdering voor gebruikers (particuliere
huishoudens)
In de Europese Unie
Let op: Deze apparatuur niet samen met het normale huisafval
weggooien!
Afgedankte elektrische en elektronische apparatuur moet gescheiden
worden ingezameld conform de wetgeving inzake de verantwoorde
verwerking, terugwinning en recycling van afgedankte elektrische en
elektronische apparatuur.
Na de invoering van de wet door de lidstaten mogen particuliere
huishoudens in de lidstaten van de Europese Unie hun afgedankte
elektrische en elektronische apparatuur kosteloos* naar hiertoe
aangewezen inzamelingsinrichtingen brengen*.
In sommige landen* kunt u bij de aanschaf van een nieuw apparaat het
oude product kosteloos bij uw lokale distributeur inleveren.
*) Neem contact op met de plaatselijke autoriteiten voor verdere
informatie.
Als uw elektrische of elektronische apparatuur batterijen of
accumulatoren bevat dan moet u deze afzonderlijk conform de
plaatselijke voorschriften weggooien.
Door dit product op een verantwoorde manier weg te gooien, zorgt u
ervoor dat het afval de juiste verwerking, terugwinning en recycling
ondergaat en potentiële negatieve effecten op het milieu en de
menselijke gezondheid worden voorkomen die anders zouden ontstaan
door het verkeerd verwerken van het afval.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op met de plaatselijke
autoriteiten voor informatie omtrent de juiste verwijderingsprocedure.
Voor Zwitserland: U kunt afgedankte elektrische en elektronische
apparatuur kosteloos bij de distributeur inleveren, zelfs als u geen nieuw
product koopt. Aanvullende inzamelingsinrichtingen zijn vermeld op de
startpagina van www.swico.ch of www.sens.ch.
B. Informatie over afvalverwijdering voor bedrijven
1. In de Europese Unie
Als u het product voor zakelijke doeleinden heeft gebruikt en als u dit wilt
weggooien:
Neem contact op met uw SHARP distributeur die u inlichtingen verschaft
over de terugname van het product. Het kan zijn dat u een
afvalverwijderingsbijdrage voor de terugname en recycling moet betalen.
Kleine producten (en kleine hoeveelheden) kunnen door de lokale
inzamelingsinrichtingen worden verwerkt.
Voor Spanje: Neem contact op met de inzamelingsinrichting of de lokale
autoriteiten voor de terugname van uw afgedankte producten.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op met de plaatselijke
autoriteiten voor informatie omtrent de juiste verwijderingsprocedure.
A.
1.
Information om återvinning
Information om återvinning av elektrisk utrustning för hushåll
EU-länder
OBS! Kasta inte denna produkt i soporna!
Förbrukad elektrisk utrustning måste hanteras i enlighet med gällande
miljölagstiftning och återvinningsföreskrifter.
I enlighet med gällande EU-regler ska hushåll ha möjlighet att lämna in
elektrisk utrustning till återvinningsstationer utan kostnad.*
I vissa länder* kan det även hända att man gratis kan lämna in gamla
produkter till återförsäljaren när man köper en ny liknande enhet.
*) Kontakta kommunen för vidare information.
Om utrustningen innehåller batterier eller ackumulatorer ska dessa
först avlägsnas och hanteras separat i enlighet med gällande
miljöföreskrifter.
Genom att hantera produkten i enlighet med dessa föreskrifter kommer
den att tas om hand och återvinnas på tillämpligt sätt, vilket förhindrar
potentiella negativa hälso- och miljöeffekter.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda på gällande sorteringsoch återvinningsföreskrifter om du behöver göra dig av med denna
produkt.
B. Information om återvinning för företag
1. EU-länder
Gör så här om produkten ska kasseras:
Kontakta SHARPs återförsäljare för information om hur man går till
väga för att lämna tillbaka produkten. Det kan hända att en avgift för
transport och återvinning tillkommer. Mindre skrymmande produkter
(om det rör sig om ett fåtal) kan eventuellt återlämnas till lokala
återvinningsstationer.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda på gällande sorteringsoch återvinningsföreskrifter om du behöver göra dig av med denna
produkt.
A.
1.
OBS! Produkten
är märkt med
symbolen ovan.
Denna symbol
indikerar att
elektroniska
produkter inte ska
kastas i det
vanliga
hushållsavfallet
eftersom det finns
ett separat
avfallshanteringssystem för dem.
Let op: Uw
product is van
dit merkteken
voorzien. Dit
betekent dat
afgedankte
elektrische en
elektronische
apparatuur niet
samen met het
normale
huisafval
mogen worden
weggegooid. Er
bestaat een
afzonderlijk
inzamelingssysteem voor
deze
producten.
vi
XL-DH320N 350NH_com.fm
2009 July16
Informação sobre Eliminação de Produtos
Information on Proper Disposal
Informações sobre a Eliminação de Produtos para os
Utilizadores (particulares)
1. Na União Europeia
Atenção: Se quiser eliminar este equipamento, não o deve fazer
juntamente com o lixo doméstico comum!
O equipamento eléctrico e electrónico deve ser tratado
separadamente e ao abrigo da legislação aplicável que obriga a um
tratamento, recuperação e reciclagem adequados de equipamentos
eléctricos e electrónicos usados.
Atenção: O
Após a implementação desta legislação por parte dos Estadosseu produto membros, todos os cidadãos residentes na União Europeia poderão
entregar o seu equipamento eléctrico e electrónico usado em
está
estações de recolha específicas a título gratuito*.
identificado
Em alguns países* o seu revendedor local também pode recolher o
com este
seu equipamento usado a título gratuito na compra de um novo
símbolo.
equipamento.
Significa que *)Contacte as entidades locais para mais informações.
os produtos Se o seu equipamento eléctrico e electrónico usado funcionar a
pilhas ou baterias, deverá eliminálas em separado, conforme a
eléctricos e
legislação local, e antes de entregar o seu equipamento.
electrónicos Ao eliminar este produto correctamente estará a contribuir para que
não devem ser o lixo seja submetido aos processos de tratamento, recuperação e
misturados
reciclagem adequados. Desta forma é possível evitar os efeitos
nocivos que o tratamento inadequado do lixo poderia provocar no
com o lixo
ambiente e na saúde.
doméstico
2.
Em outros Países fora da UE
comum. Existe
Se quiser eliminar este produto, contacte as entidades locais e
um sistema de informese sobre o método correcto para proceder à sua eliminação.
recolhas
Na Suíça: O equipamento eléctrico e electrónico é aceite, a título
específico
gratuito, em qualquer revendedor, mesmo que não tenha adquirido
um novo produto. Poderá encontrar uma lista das estações de
para estes
recolha destes equipamentos na página da Web www.swicho.ch ou
produtos.
www.sens.ch.
B. Informações sobre a Eliminação de Produtos para
Utilizadores-Empresas
1. Na União Europeia
Se o produto for usado para fins comerciais e quiser eliminá-lo:
Contacte o seu revendedor SHARP que irá informá-lo sobre a
melhor forma de eliminar o produto. Poderá ter de pagar as
despesas resultantes da recolha e reciclagem do produto. Alguns
produtos mais pequenos (e em pequenas quantidades) poderão ser
recolhidos pelas estações locais.
Na Espanha: Contacte o sistema de recolhas público ou as
entidades locais para mais informações sobre a recolha de produtos
usados.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades locais e
informese sobre o método correcto para proceder à sua eliminação.
A.
Information on Disposal for Users (private households)
In the European Union
Attention: If you want to dispose of this equipment, please do not use
the ordinary dustbin!
Used electrical and electronic equipment must be treated separately
and in accordance with legislation that requires proper treatment,
recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households
within the EU states may return their used electrical and electronic
equipment to designated collection facilities free of charge*.
In some countries* your local retailer may also take back your old
product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or
accumulators, please dispose of these separately beforehand
according to local requirements.
By disposing of this product correctly you will help ensure that the
waste undergoes the necessary treatment, recovery and recycling
and thus prevent potential negative effects on the environment and
human health which could otherwise arise due to inappropriate
waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local
authorities and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be
returned free of charge to the dealer, even if you don't purchase a
new product. Further collection facilities are listed on the homepage
of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard
it:
Please contact your SHARP dealer who will inform you about the
take-back of the product. You might be charged for the costs arising
from take-back and recycling. Small products (and small amounts)
might be taken back by your local collection facilities.
For Spain: Please contact the established collection system or your
local authority for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local
authorities and ask for the correct method of disposal.
A.
1.
Attention: Your
product is
marked with
this symbol. It
means that
used electrical
and electronic
products
should not be
mixed with
general
household
waste. There
is a separate
collection
system for
these
products.
Tietoja laitteen hävittämisestä
Hävitysohjeet käyttäjille (yksityiset kotitaloudet)
Euroopan unionissa
Huomio: Jos haluat hävittää tämän laitteen, älä käytä tavallista
jätesäiliötä.
Käytetyt sähkö- ja elektroniikkalaitteet pitää hävittää erikseen noudattaen lainsäädäntöä, joka takaa käytettyjen sähkö- ja elektroniikkalaitteiden oikean käsittelyn, keräämisen ja kierrättämisen.
Jäsenvaltioiden täytäntöönpanoa seuraten yksityiset kotitaloudet
EU:n jäsenvaltioissa voivat palauttaa käytetyt sähkö- ja elektroniHuomio: Tuote ikkalaitteet määrättyihin keräyspaikkoihin ilmaiseksi*. Joissakin
on merkitty tällä maissa* paikalliset vähittäismyyjät voivat myös ottaa vastaan vanhan
tuotteen ilmaiseksi, jos asiakas ostaa vastaavan uuden tuotteen.
symbolilla.
*) Pyydä lisätietoja paikallisviranomaisilta.
Tämä tarkoit- Jos käytetyissä sähkö- tai elektroniikkalaitteissa käytetään paristoja
taa, että käytet- tai akkuja, hävitä nämä tuotteet etukäteen erikseen paikallisten
tyjä sähkö- ja säädösten mukaisesti.
Hävittämällä tuotteen asiamukaisesti, autat varmistamaan, että jätelektroniikkalaitteita ei teet käsitellään, kerätään ja kierrätetään asianmukaisella tavalla.
saa sekoittaa Näin vältytään haitallisilta ympäristö- ja terveysvaikutuksilta, joita
saattaa olla seuraamuksena jätteen epäasianmukaisesta käsitkotitalouden telystä.
yleisjätteiden 2. Muissa maissa EU:n ulkopuolella
kanssa. Näille Jos haluat hävittää tuotteen, ota yhteys paikallisiin viranomaisiin ja
pyydä ohjeita tuotteen asianmukaiseen hävittämiseen.
tuotteille on
olemassa eril- B. Hävitysohjeet yrityskäyttäjille
1. Euroopan unionissa
linen
Jos tuotetta on käytetty yrityskäytössä, ja haluat hävittää sen,
keräysjärjest- Oota yhteys SHARP-jälleenmyyjään, joka antaa sinulle lisäohjeita tai
elmä.
ottaa tuotteen vastaan. Sinulta saatetaan veloittaa tuotteen vastaanottamisesta ja kierrätyksestä johtuvat kustannukset. Paikalliset
keräyspisteet saattavat ottaa vastaan pienet tuotteet (ja pienet
määrät).
2. Muissa maissa EU:n ulkopuolella
Jos haluat hävittää tuotteen, ota yhteys paikallisiin viranomaisiin ja
pyydä ohjeita tuotteen asianmukaiseen hävittämiseen.
A.
1.
vii
XL-DH320N 350NH_com.fm
2009 July16
Informationen zur Batterieentsorgung
Die für dieses Produkt mitgelieferte Batterie kann Spuren von Blei
enthalten.
Für die EU: Die durchgestrichene Abfalltonne bedeutet, dass
gebrauchte Batterien nicht mit dem Haushaltsmüll entsorgt werden
sollten! Es gibt getrennte Sammelsysteme für gebrauchte Batterien,
welche eine ordnungsgemäße Behandlung und Verwertung
entsprechend gesetzlicher Vorgaben erlauben. Weitere Einzelheiten
erhalten Sie von IhrerGemeindeverwaltung.
Für die Schweiz: Die gebrauchte Batterie kann an der Verkaufsstelle
zurückgegeben werden.
Für andere Nicht-EU Staaten: Bitte erkundigen Sie sich bei Bedarf
bei Ihrer Gemeindeverwaltung nach weiteren Informationen zur
Entsorgung von gebrauchten Batterien.
Informatie over afvalverwerking van batterijen
De batterij die bij dit toestel geleverd wordt bevat sporen van Lood.
Voor EU: De doorgestreepte vuilnisbak op wieltjes duidt aan dat de
gebruikte batterijen niet mogen terechtkomen in het gewone
huishoudelijke afval. Er bestaat een gescheiden ophaalsysteem
voor deze gebruikte batterijen om eigen behandeling en recyclage
volgens de wetgeving toe te laten. Gelieve de locale autoriteiten te
contacteren voor de details van ophaling en recyclage.
Voor Zwitserland: De gebruikte batterij moet bij hetverkooppunt
teruggebracht worden.
Voor andere niet EU landen: Gelieve contact op te nemen met uw
locale autoriteiten voor de correcte methode van verwerking van de
gebruikte batterijen.
Information sur la mise au rebut de la pile
Les piles/accus fournies avec ce produit peuvent contenir des traces
de Plomb.
Au sein de l’Union Européenne : Le symbole de la poubelle sur
roues barrée laisse supposer que les piles/accus usagées ne
doivent pas être mélangées avec les déchets ménagers! Il existe un
mode de collecte séparé pour les piles/accus usagées, ce qui
permet d’effectuer un traitement et un recyclage en accord avec la
législation. Veuillez contacter une autorité locale pour plus de
renseignements sur le système mis en place.
Pour la Suisse : Les piles/accus usagées doivent être retournées
chez votre détaillant.
Pour les pays hors Union Européenne : Veuillez contacter une
autorité locale afin de connaître la bonne méthode à utiliser pour la
collecte de vos piles/accus usagées.
Informação sobre Eliminação de Pilhas
A bateria fornecida com este produto contém traços de chumbo.
Para a União Europeia: O contentor de rodas traçado significa que
as baterias usadas não deverão ser colocadas junto com o lixo
doméstico! Existe um sistema de separação próprio para baterias
usadas, para permitir um tratamento e reciclagem própria de acordo
com a legislação em vigor. Por favor contacte as autoridades locais
para mais detalhes nos esquemas de recolha e reciclagem.
Para a Suíça: As baterias usadas deverão ser devolvidas ao ponto
de venda.
Para os outros países fora da União Europeia: Por favor contacte a
sua autoridade local para o método correcto de disposição das
baterias usadas.
Información sobre la eliminación de la batería
Las baterías suministradas con este producto contienen pequeñas
cantidades de Plomo.
Para EU: El contenedor de basura con ruedas tachado indica que
las baterías usadas no deberían mezclarse con los residuos
domésticos generales. Existe un sistema de recogida independiente
de baterías usadas, para permitir un correcto tratamiento y reciclado
de acuerdo con la legislación vigente. Por favor póngase en
contacto con el sistema de recogida establecido o con las
autoridades locales para la recogida selectiva de las baterías
usadas.
Para Suiza: Las baterías usadas deben ser retornadas al punto de
venta.
Para otros países fuera de la Unión Europea: Por favor póngase en
contacto con las autoridades locales para un correcto procedimiento
de eliminación de las baterías usadas.
Tietoja paristojen hävittämisestä
Tämän tuotteen mukana oleva paristo/akku saattaa sisältää
jäänteitä Lyijy.
EU-maat: Paristo/akku on merkitty yliviivatun roskasäiliön
symbolilla, mikä tarkoittaa, että sitä ei saa hävittää kotitalouden
yleisjätteiden kanssa. Paristoille/akuille on olemassa erillinen
keräysjärjestelmä, joka helpottaa niiden asiamukaista käsittelyä ja
lainmukaista kierrätystä. Ota yhteys kuntaviranomaisiin saadaksesi
lisätietoa keräyksestä ja kierrätyksestä.
Sveitsi: Käytetyt paristot/akut palautetaan ostopaikkaan.
EU:n ulkopuoliset maat: Ota yhteys paikallisviranomaisiin
saadaksesi lisätietoa voimassa olevista lajittelu- ja
kierrätyssäädöksistä ja ohjeet käytetyn pariston/akun
hävittämiseen.
Information on Battery Disposal
The battery supplied with this product contains traces of Lead.
For EU: The crossed-out wheeled bin implies that used batteries
should not be put to the general household waste! There is a
separate collection system for used batteries, to allow proper
treatment and recycling in accordance with legislation. Please
contact your local authority for details on the collection and recycling
schemes.
For Switzerland: The used battery is to be returned to the selling
point.
For other non-EU countries: Please contact your local authority for
correct method of disposal of the used battery.
Information om batteriavyttring
Batteriet som följer med denna produkt kan innehålla spår av Bly.
För EU: Batteriet är märkt med den överkorsade soptunnan vilket
betyder att det inte ska kastas i det vanliga hushållsavfallet. Det finns
ett separat insamlingssystem för batterier för att underlätta korrekt
behandling och återvinning enligt gällande lagstiftning. Kontakta
kommunen för vidare information om insamling och återvinning.
För Schweiz: Använda batterier lämnas till inköpsstället.
För länder utanför EU: Kontakta de lokala myndigheterna för
information om gällande sorterings- och återvinningsföreskrifter om
du behöver göra dig av med ett använt batteri.
Informazioni sullo smaltimento della batteria
La batteria fornita con questo prodotto contiene tracce di Piombo.
Per EU: Il cassonetto barrato indica che le batterie usate non devono
essere gettate assieme ai rifiuti domestici! Vi è un sistema di raccolta
differenziata per le batterie usate, che consente il loro corretto
trattamento e riciclo secondo quanto previsto dalle leggi vigenti. Vi
prego di contattare le locali autorità per i dettagli del sistema di
raccolta e riciclaggio.
Per la Svizzera: Le batterie usate devono essere restituite al punto
vendita.
Per altri Stati non-EU: Vi prego di contattare le autorità locali per
conoscere il metodo corretto di conferimento delle batterie usate.
viii
XL-DH320N 350NH_com.fm
2009 July23
ENGLISH
XL-DH320NH Micro Component System consisting of XL-DH320NH (main unit) and CP-DH320NH (speaker system).
XL-DH350NH Micro Component System consisting of XL-DH350NH (main unit) and CP-DH350NH (speaker system).
Introduction
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual
carefully. It will guide you in operating your SHARP product.
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such
use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Accessories
Please confirm that the following accessories are included.
Adaptor A x 1
Adaptor B x 1
Adaptor 9 x 1
Adaptor 10 x 1
Remote control x 1
AM loop aerial x 1
FM aerial x 1
“AAA” size battery (UM/SUM-4,
R3, HP-16 or similar) x 2
The illustrations printed in this operation manual are for the model XL-DH320NH.
CONTENTS
Page
Page
General Information
USB
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Listening to USB mass storage
device/MP3 player . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 13
Advanced USB playback . . . . . . . . . . . . . . . . . . . . . . . 13
Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Radio
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Basic Operation
Advanced Features
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting the clock (Remote control only) . . . . . . . . . . . . . 6
Using the Radio Data System (RDS) . . . . . . . . . 15 - 17
Timer and sleep operation
(Remote control only) . . . . . . . . . . . . . . . . . . . . . 18 - 19
iPod
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . 20
Listening to the iPod. . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 8
References
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . . . . 8 - 9
Advanced CD or MP3/WMA disc playback . . . . . . . 9 - 10
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . 20 - 21
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
MP3/WMA folder mode (only for MP3/WMA files) . . . . 11
E-1
Precautions
■
General
● Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least 10
cm (4") of free space along the sides, top and back of
the equipment.
10 cm (4") 10 cm (4")
10 cm (4")
MICRO COMPONENT SYSTEM
XL-DH320
10 cm
(4")
● Use the unit on a firm, level surface free from vibration.
● Place the speakers at least 30 cm (12") away from any
CRT TV to avoid colour variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
● Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
● Do not place anything on top of the unit.
● Do not expose the unit to moisture, to temperatures
higher than
60˚C (140˚F) or to extremely low
temperatures.
● If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
● In case of an electrical storm, unplug the unit for safety.
● Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
● The AC power plug is used as a disconnect device and
shall always remain readily operable.
● Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
● The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
● No naked flame sources, such as lighted candles,
should be placed on the apparatus.
● Attention should be drawn to the environmental
aspects of battery disposal.
● This unit should only be used within the range of 5˚C 35˚C (41˚F - 95˚F).
● The apparatus is designed for use in moderate
climates.
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
■
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It is
advisable to avoid exposure to high volume levels. Do not
turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
Controls and indicators
■
1
2
3
9
4
10
5
11
6
12
7
13
8
MICRO COMPONENT SYSTEM
XL-DH320
E-2
04/1/28
XL-DH320N 350H_09 EN.fm
Front panel
Page
1. iPod Docking Station. . . . . . . . . . . . . . . . . . . . . . . 7
2. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Timer Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4. On/Stand-by Button. . . . . . . . . . . . . . . . . 5, 7, 9, 18
5. Audio In Socket . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . 20
7. USB Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
9. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
10. FUNCTION Button . . . . . . . . . . . . . . . . . . . . 8, 9, 12
11. Disc/USB/iPod Play or Pause Button. . . . . 8, 9, 12
12. Disc/USB Stop Button . . . . . . . . . . . . . . . . . 8, 9, 12
13. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . 9
1
2
3
4
5
6
7
8
9
Controls and indicators (continued)
■
1
Page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . 5
2. On/Stand-by Button. . . . . . . . . . . . . . . 5, 6, 7, 8, 18
3. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . 9
4. Play Mode Button . . . . . . . . . . . . . . . . . . . 9, 10, 13
5. iPod Display (TV OUT) Button . . . . . . . . . . . . . 4, 8
6. Disc/USB Stop Button . . . . . . . . . . . . . . . . . . . 9, 12
7. Disc/USB Display Button . . . . . . . . . . . . . . . 11, 12
8. Bass/Treble Button . . . . . . . . . . . . . . . . . . . . . . . . 5
9. Volume Up or Down Buttons . . . . . . . . . . . . . . . . 5
10. Memory Button . . . . . . . . . . . . . . . . . . . 6, 9, 14, 18
11. Clear/Dimmer Button. . . . . . . . . . . . . . . . . . . . 5, 10
12. Folder Button . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
13. Tuning Up, iPod Cursor Up Button. . . . . 11, 12, 14
14. CD Track Down or Fast Reverse, Time Down
Button . . . . . . . . . . . . . . . . . . . . . . . . 6, 8, 9, 12, 18
15. Enter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 5, 10
16. Tuning Down, iPod Cursor Down Button 11, 12, 14
17. Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
18. iPod Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
19. Disc Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
20. USB Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
21. Audio In Button . . . . . . . . . . . . . . . . . . . . . . . . . . 20
22. Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . 9
23. iPod Menu Button . . . . . . . . . . . . . . . . . . . . . . . 7, 8
24. iPod Play/Pause Button. . . . . . . . . . . . . . . . . . . 7, 8
25. Disc/USB Play/Pause Button . . . . . . . . . . . 8, 9, 12
26. X-Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
27. Equaliser Mode Button . . . . . . . . . . . . . . . . . . . . . 5
28. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . 6, 18
29. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
30. Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . 14
31. CD Track Up or Fast Forward, Time Up
Button . . . . . . . . . . . . . . . . . . . . . . . . . 6, 8, 9, 12, 18
32. Tuner Preset Down Button . . . . . . . . . . . . . . . . . 14
33. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . 14
34. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . . 15
35. RDS PTY Button. . . . . . . . . . . . . . . . . . . . . . . . . . 15
36. RDS Display Button. . . . . . . . . . . . . . . . . . . . . . . 15
22
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1
23
24
25
26
27
28
29
30
CD
USB
31
32
33
34
35
36
2
3
4 5 6 7 8 9 10
■
16 17
12 1314
19
15
■
1.
2.
3.
4.
Speaker system (CP-DH320NH)
Tweeter
Woofer
Bass Reflex Duct
Speaker Wire
1
3
2
4
■
1.
2.
3.
4.
Speaker system (CP-DH350NH)
Tweeter
Woofer
Bass Reflex Duct
Speaker Wire
1
3
■
2
E-3
XL-DH320N 350H_09 EN.fm
Speaker grilles are removable
Make sure nothing comes into contact
with the speaker diaphragms when
you remove the speaker grilles.
(CP-DH350NH only).
4
04/1/28
Display
Page
1. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . 11
2. MP3/WMA Title Indicators . . . . . . . . . . . . . . . . . . 11
3. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6. TA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7. PTYI Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8. TP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
10. Once Timer Play Indicator. . . . . . . . . . . . . . . . . . 19
11. MP3/WMA Total Indicator . . . . . . . . . . . . . . . . . . 11
12. Daily Timer Play Indicator . . . . . . . . . . . . . . . . . . 19
13. FM Stereo Mode Indicator. . . . . . . . . . . . . . . . . . 14
14. FM Stereo Receiving Indicator . . . . . . . . . . . . . . 14
15. Memory Indicator. . . . . . . . . . . . . . . . . . . . . . 10, 18
16. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . 5
17. Disc/USB Repeat Play Indicator . . . . . . . . . . . . . . 9
18. Disc/USB Pause Indicator. . . . . . . . . . . . . . . . . . . 9
19. Disc/USB Play Indicator . . . . . . . . . . . . . . . . . . . . 9
11
18
Remote control
System connections
Make sure to unplug the AC power lead before making any connections.
Video cable
(not supplied)
Right speaker
TV
To video input socket
Left
speaker
AM loop
aerial
Installing the AM
loop aerial
< Assembling >
Red
Black
< Attaching to the
wall >
FM aerial
wall
screws
(not supplied)
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
■
■
Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the
strongest signal can be received.
External FM aerial:
Use an external FM aerial (75 ohms coaxial cable) for
better reception. When an external FM aerial is used,
disconnect the supplied FM aerial wire.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM and GND terminals.
Position the AM loop aerial for optimum reception. Place
the AM loop aerial on a shelf, etc., or attach it to a stand or
a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead
may cause noise pickup. Place the aerial away from the
unit for better reception.
■
Speaker connection
● Connect the black wire to the
minus (–) terminal, and the red
wire to the plus (+) terminal.
● Use speakers with an
impedance of 4 ohms or more,
as lower impedance speakers
can damage the unit.
● Do not mistake the right and the
left channels. The right speaker
is the one on the right side when
Incorrect
you face the unit.
● Do not let the bare speaker wires touch each other.
● Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
● Do not stand or sit on the speakers. You may be
injured.
■
XL-DH320N 350H_09 EN.fm
Connecting iPod to a TV
The iPod with photo and video can be viewed by
connecting to a TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO
OUT socket on the rear of the unit.
Note:
Please make sure to set iPod unit to either NTSC or PAL
to match your TV signal. Please visit Apple’s homepage for
further information.
■
AC power connection
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket. If you plug in the unit first, the unit will enter the
stand-by mode.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
E-4
04/1/28
Demonstration mode
● The first time the unit is plugged in, the unit will enter
the demonstration mode. You will see words scroll.
● To cancel the demonstration mode, press the DEMO
button (remote control) during power stand-by mode.
The unit will enter the low power consumption mode.
● To return to the demonstration mode, press the DEMO
button again.
1
2
3
4
5
6
7
8
9
Remote control
■
General control
Battery installation
1 Open the battery cover.
2 Insert the supplied batteries according to the direction
indicated in the battery compartment.
When inserting or removing the batteries, push them
towards the (–) battery terminals.
3 Close the cover.
CD
USB
Caution:
● Replace all old batteries with new ones at the same
time.
● Do not mix old and new batteries.
● Remove the batteries if the unit will not be used for a
long period of time. This will prevent potential damage
due to battery leakage.
● Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
● Installing the batteries incorrectly may cause the unit to
malfunction.
● Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like.
Notes concerning use:
● Replace the batteries if the operating distance is
reduced or if the operation becomes erratic. Purchase
2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or
similar).
● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
● Keep the remote control away from moisture, heat,
shock, and vibrations.
■
Test of the remote control
Check the remote control after checking all the
connections.
Point the remote control directly at the remote sensor on
the unit. The remote control can be used within the range
shown below:
Remote sensor
■
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power
stand-by mode.
■
Display brightness control
To dim the display brightness, hold down the CLEAR/
DIMMER button on the remote control for 2 seconds or
more.
■
Volume auto fade-in
If you turn off and on the main unit with the volume set to
27 or higher, the volume starts at 16 and fades in to the last
set level.
■
Volume control
Turn the volume knob towards VOL +/– (on main unit) or
press VOLUME +/– (on remote control) to increase or
decrease the volume.
■
X-Bass control
When the power is first turned on, the unit will enter the
extra bass mode which emphasises the bass frequencies,
and “X-BASS” will appear. To cancel the extra bass mode,
press the X-BASS button on the remote control.
■ Bass control
1 Press the BASS/TREBLE button to select “BASS”.
2 Within 5 seconds, press the VOLUME (+ or –) button to
adjust the bass.
■ Treble control
1 Press the BASS/TREBLE button to select “TREBLE”.
2 Within 5 seconds, press the VOLUME (+ or –) button to
adjust the treble.
■
0.2 m - 6 m
(8" - 20' )
Equaliser
When the EQUALIZER MODE button is pressed, the
current mode setting will be displayed. To change to a
different mode, press the EQUALIZER MODE button
repeatedly until the desired sound mode appears.
FLAT
No
Noequalization.
equalisation.
GAME
For
music.
Forrock
game.
music.
CLASSIC For
Forclassical
classical
music.
CD
USB
E-5
04/1/28
XL-DH320N 350H_09 EN.fm
POPS
For
music.
Forpop
pop
music.
VOCAL
Vocals
enhanced.
Vocalsareare
enhanced.
JAZZ
For
Forjazz.
jazz.
Setting the clock (Remote control
only)
Listening to the iPod
Supported iPod models:
● iPod nano (software 1.2 above)
● iPod mini (software 1.2 above)
● iPod (5th generation) (software 1.3 above) (Dock
connector equipped Click Wheel model)
● iPod (4th generation) (software 3.0.2 above) (Dock
connector equipped Click Wheel model)
● iPod nano (2nd generation) (software 1.0.0 above)
● iPod nano (3rd generation) (software 1.0.3 above)
● iPod nano (4th generation) (software 1.0.3 above)
● iPod classic (software 1.0.3 above)
● iPod touch (software 1.1 above)
● iPod touch (2nd generation) (software 2.1 above)
Caution:
Please update your iPod unit to the latest software version
from Apple’s homepage before using it.
Notes:
● Once the iPod is connected to the unit it will begin
charging.
● The iPod unit cannot be charged whilst the main unit is
in the stand-by mode or during USB mode.
Auto power on function:
When you press any of the following buttons, the unit turns
on.
● iPod button on the remote control: The unit turns on
and the iPod function is activated.
●
/ button on the main unit: The unit turns on and
playback of the last function will start (iPod, CD,
TUNER, USB, AUDIO IN).
CD
USB
In this example, the clock is set for the 24-hour (0:00)
display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
3 Within 10 seconds, press the MEMORY button.
Press the
or
button to select 24-hour or 12hour display and then press the MEMORY button.
“0:00”
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
“AM 0:00”
(AM 0:00 - PM 11:59)
4 To adjust the hour, press the
or
button and
then press the MEMORY button. Press the
or
button once to advance the time by 1 hour. Hold it
down to advance continuously.
5 To adjust the minutes, press the
or
button and
then press the MEMORY button. Press the
or
button once to advance the time by 1 minute.
“AM 12:00”
■
The marking shows
which iPod fits
iPod
Adaptor No.
9
9
9
10
10
A
A
A
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
The “CLOCK” will appear or time will be displayed when
the AC power supply is restored after a power failure or
unplugging the unit. If incorrect, readjust the clock as
follows.
To readjust the clock:
Perform “Setting the clock” from step 1. If the “CLOCK”
does not appear in step 2, step 3 (for selecting the 24-hour
or 12-hour display) will be skipped.
A
B
B
B
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to “Factory
reset, clearing all memory” on page 21 for details.]
2 Perform “Setting the clock” from step 1 onwards.
XL-DH320N 350H_09 EN.fm
9
iPod Description
Capacity
5G iPod (with video)
U2 iPod with video
iPod classic
5G iPod with video
iPod classic
iPod mini
4G iPod & U2 iPod
iPod photo & colour U2
iPod
iPod with colour display
4G iPod
iPod photo
iPod with colour display
30GB
30GB
80GB, 120GB
60GB & 80GB
160GB
4GB & 6GB
20GB
20GB & 30GB
20GB
40GB
40GB & 60GB
60GB
Notes:
● iPod nano 2G, iPod nano 3G, iPod classic and iPod
touch are not compatible with the iPod adaptors listed
above. Please use the adaptor supplied with your iPod
unit.
● If you have an iPod that does not have an iPod 30 Pin
connector, you can use an audio cable to connect it to
the AUDIO IN socket.
● iPhone is not supported by this system.
E-6
04/1/28
iPod adaptor connection
Choose the iPod adaptor that fits your iPod. Your iPod will
fit snuggly into the correct adaptor. If your iPod is not
mentioned below, an iPod adaptor may have been
included with your iPod unit.
1
2
3
4
5
6
7
8
9
Listening to the iPod (continued)
■
To insert iPod adaptor
1 Open the iPod cover by pulling up the tip.
pull up
2 Insert the iPod adaptor into the iPod dock and connect
your iPod.
iPod (bottom)
iPod
CD
USB
Dock connector
■
iPod adaptor
iPod dock
iPod
connector
1 Press the ON/STAND-BY button to turn the power on.
2 Press the iPod button on the remote control or
FUNCTION button repeatedly on the main unit to
select iPod function.
3 Insert iPod unit in iPod dock of main unit.
4 Press the / button to start playback.
■
■
To remove iPod adaptor
iPod playback
To disconnect iPod
Simply remove the iPod from the iPod dock. It is safe to do
so even during playback.
Insert the tip of a screwdriver (“–” type, small) into the iPod
adaptor hole as shown and lift upward to remove.
■
Navigating the iPod menus
1 Press the MENU button to view the menu on iPod unit.
Press it again to go back to previous menu.
or ) button to select an item on
the menu and then press ENTER button.
2 Use the TUNING (
Note:
When navigating the iPod menus with remote control, do
not operate any of the buttons on the iPod unit. The volume
level is adjusted by pressing the VOL (+ or –) button on the
main unit or the remote control. Adjusting the volume on
the iPod unit gives no effect.
iPod operation:
The operations described below depend on the generation
iPod you are using.
System on operation:
When the main unit is powered on, the iPod unit will
automatically power on when docked in the unit (including
TIMER function/exclude USB function).
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked
iPod unit will automatically turn to stand-by mode.
E-7
04/1/28
XL-DH320N 350H_09 EN.fm
Listening to the iPod (continued)
■
Listening to a CD or MP3/WMA disc
Watching videos on a TV connected to
iPod
1 Press the DISPLAY (TV OUT) button for more than 2
seconds. “TV DISP” will appear on display.
2 Press the ENTER button to start playback.
Notes:
● If the TV Out setting is already turned on at video menu, the
video is automatically displayed on the TV screen when
ENTER key is pressed.
● To return to watching video on iPod screen, press the MENU
button to enter video menu. Then press the DISPLAY (TV
OUT) button for more than 2 seconds until “iPod DISP”
appears.
● During iPod video playback, pressing the DISPLAY (TV OUT)
button will not toggle video out display between iPod and TV.
iPod playback detection function:
Once the play button on the iPod unit is pressed, the main unit
will automatically change to iPod function overriding the previous
function selected.
CD
USB
Caution:
● Unplug all accessories for the iPod before inserting it into the
iPod dock.
● Stop button ( ) at main unit is invalid during iPod function.
■
Various iPod functions
Function
Main
unit
Remote
control
Operation
Play
Press in the pause
mode.
Pause
Press in the playback
mode.
Track up/
down
____
Fast
forward/
reverse
____
Display
____
Press in the playback or
pause mode.
If you press the button in
the pause mode, press
the / button to start
the desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
iPod back light ON.
Press for more than 2
seconds to toggle the
video out display
between iPod or TV.
Press to toggle repeat
mode.
Repeat
____
Shuffle
____
Press and hold down to
toggle shuffle mode.
iPod
Menu
____
iPod
Enter
____
Press to view the iPod
menu during iPod
function.
Press to confirm the
selection.
iPod
Cursor
Up/Down
____
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record
on them. Some audio CD-R and CD-RW discs may not be
playable due to the state of the disc or the device that was used
for recording.
MP3:
MP3 is a form of compression. It is an acronym which
stands for MPEG Audio Layer 3. MP3 is a type of audio code
which is processed by significant compression from the
original audio source with very little loss in sound quality.
● This system supports MPEG 1 Layer 3 and VBR files.
● During VBR file playback, time counter in the display may
differ from its actual playback time.
● Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include
audio files which are compressed with Windows Media
Audio codec. WMA is developed by Microsoft as an audio
format file for Windows Media Player.
● “MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
● Bitrate which is supported by WMA is 64 ~ 160 kbps.
Auto power on function:
When you press any of the following buttons, the unit turns on.
● CD button on the remote control: The unit turns on and the
“CD” function is activated.
●
/ button on the main unit: The unit turns on and playback
of the last function starts (CD, TUNER, AUDIO IN, iPod,
USB).
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit
enters the stand-by mode after 15 minutes of inactivity.
Press to select the iPod
menu.
E-8
04/1/28
XL-DH320N 350H_09 EN.fm
1
2
3
4
5
6
7
8
9
Listening to a CD or MP3/WMA disc
(continued)
■
Advanced CD or MP3/WMA disc
playback
Disc playback
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
CD
USB
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
5 Press the OPEN/CLOSE button to close the disc tray.
6 Press the / button to start playback. After the last track is
played, the unit will stop automatically.
Caution:
● Do not place two discs in one disc tray.
● Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunctions.
● Do not push the disc tray whilst it is moving.
● If the power fails whilst the tray is open, wait until the power
is restored.
● If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
● Be sure to place 8 cm (3") disc in the middle of the disc tray.
● Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
Notes for CD or MP3/WMA disc:
● When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached
during fast reverse, the unit will enter the playback mode
(only for CD).
● Rewritable multi-session discs with unfinished writing, can
still be played.
■
Various disc functions
Function
Main
unit
Play
Remote
control
Operation
■
By using the Direct Search buttons, the desired tracks on the
current disc can be played.
Use the Direct Search buttons on the remote control to
select the desired track whilst playing the selected disc.
● The Direct Search buttons allow you to select up to number 9.
● When selecting number 10 or higher, use the “10+” button.
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
Selected track number
B. For example, to choose 130
1 Press the “10+” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
Notes:
● A track number higher than the number of tracks on the disc
cannot be selected.
● During random play, direct search is not possible.
To stop playback:
Press the (CD ) button.
■
Press in the stop mode.
Stop
Press in the playback
mode.
Pause
Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
Track
up/
down
____
Fast
forward/
reverse
____
XL-DH320N 350H_09 EN.fm
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button repeatedly until “1-REPEAT”
appears. Press the / button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “ALL REPEAT”
appears. Press the / button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on page 10 and
then press the PLAY MODE button repeatedly until “ALL
REPEAT” appears.
To cancel repeat play:
Press the PLAY MODE button repeatedly until “NORMAL”
appears and “
” disappears.
E-9
04/1/28
Direct track search
Advanced CD or MP3/WMA disc playback (continued)
■
■
Random play
The tracks on the disc can be played in random order
automatically.
Programmed play (MP3/WMA)
1 Whilst in the stop mode, press the MEMORY button to
enter the programming save mode.
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RANDOM” appears. Press the / button.
To cancel random play:
Press and hold the PLAY MODE button until “NORMAL”
appears and “R” disappears.
2 Press the TUNING/FOLDER (
or ) button on the
remote control to select the desired folder.
Then press the
or
button on the remote
control to select the desired tracks.
Notes:
● If you press the
button during random play, you can
move to the track selected next by the random
operation. On the other hand, the button does not allow
you to move to the previous track.
● The beginning of the track being played will be located.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
Caution:
After performing repeat play, be sure to press the
(CD ) button. Otherwise, the disc will play continuously.
■
Programmed play (CD)
You can choose up to 32 selections for playback in the
order you like.
1 Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2 Press the
or
buttons on the remote control to
select the desired track.
3 Press the MEMORY button to save the folder and track
number.
4 Repeat steps 2 – 3 for other folder/tracks. Up to 32
tracks can be programmed.
5 Press the
Adding tracks to the programme:
If a programme has been previously stored, the
“MEMORY” indicator will be displayed. Then follow steps
1 - 3 to add tracks. The new tracks will be stored after the
last track of the previous programme.
Notes:
● When a disc is ejected, the programme is automatically
cancelled.
● If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
● During the programme operation, random play is not
possible.
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you want to check the programmed
tracks, press the MEMORY button repeatedly. If you
make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
/ button to start playback.
E-10
04/1/28
XL-DH320N 350H_09 EN.fm
/ ) button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the (CD )
button. The display will show “MEM CLEAR” and all the
programmed contents will be cleared.
Selected track number
5 Press the
/ (CD
1
2
3
4
5
6
7
8
9
MP3/WMA folder mode (only for MP3/WMA files)
To play back MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can
download MP3/WMA (Windows Media Audio) music files.
Follow the instructions from the website on how to
download the music files. You can then play back these
downloaded music files by burning them to a CD-R/RW
disc.
● Your downloaded song/files are for personal use only.
Any other usage of the song without owner’s
permission, is against the law.
■
CD
USB
About folder playback order
If MP3/WMA files are recorded in several folders, a folder
number will be set to each folder automatically.
These folders can be selected by the FOLDER button on
the remote control. If there is no supported file formats
inside the selected folder, the folder is skipped and the next
folder will be selected.
Example: How to set folder number if MP3/WMA format
files are recorded as below figure.
■
Procedure to playback MP3/WMA disc with
folder mode on
To play back CD-R/RW.
1 Press the CD button, and load an MP3/WMA disc. After
disc is loaded, disc info will be displayed.
1 ROOT folder is set as folder 1.
2 As for folders inside ROOT folder (Folder A and Folder
Disc
Name
B), the folder which is recorded earlier on the disc will be
set as folder 2 and folder 3.
TOTAL indicator
3 As for folder inside Folder A (Folder C and Folder D), the
2 Press the FOLDER button, and press the TUNING (
4 Folder E that is inside Folder D will be set as folder 6.
● The folder and file order information which is recorded
on the disc depends on the writing software. There
maybe possibilities that this unit will playback the files
not according to our expected playback order.
● For CD MP3/WMA, 255 numbers of folders and files
inclusive of the folders which have non playable files
can be read.
Folder mode on/off can be operated by the FOLDER
button on the remote control. Files that are played when
folder mode is set to the on position, may differ from those
played back when folder mode is turned off.
FOLDER A
(FOLDER 2)
FOLDER C
(FOLDER 4)
FOLDER D
(FOLDER 5)
FOLDER B
(FOLDER 3)
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
FOLDER E
(FOLDER 6)
Total number of
files
Total number
of folder
folder which is recorded earlier on the disc will be set as
folder 4 and folder 5.
ROOT
(FOLDER 1)
MP3 indicator
WMA indicator
or ) button to select desired playback folder. (Folder
mode on)
FOLDER
indicator
First track
number in the
folder
FOLDER
number
3 Select desired file to be played back by pressing the
or
button.
4 Press the
/ (CD / ) button. Playback will start and
file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded on the disc.
● In case of playback with the folder mode on, press
the TUNING ( or ) button, and the folder can be
selected even though it is in playback/pause mode.
It will continue playback/pause mode in the 1st track
of the selected folder.
● Display content can be changed by pressing the
DISPLAY button.
FILE 9
FILE 10
FILE 1
FILE 2
File name display
Title display
Function display
Artist display
Album display
Note:
If “NO SUPPORT” is displayed, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
E-11
04/1/28
XL-DH320N 350H_09 EN.fm
Listening to USB mass storage device/MP3 player
■
To play back USB/MP3 player with folder
mode on
1 Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2 Press the FOLDER button, and press the TUNING (
or ) button to select desired playback folder. To start
playback with folder mode on, go to step 4. To change
the playback folder, press the TUNING ( or ) button
to select another folder.
3 Select desired file to be played back by pressing the
or
CD
USB
button.
4 Press the / (USB / ) button. Playback will start and
the file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
● Display content can be changed by pressing the
DISPLAY button.
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
■
■
To remove USB memory device
1 Press the
To play back USB/MP3 player with folder
mode off
(USB
) button to stop playback.
2 Disconnect USB memory device from the USB terminal.
1 Press the USB button on the remote control or
FUNCTION button repeatedly on main unit to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2 Select desired file to be played back by pressing the
or
button.
3 Press the / (USB / ) button. Playback will start and
the file name will be displayed.
● Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
● Display content can be changed by pressing the
DISPLAY button.
Note:
To pause playback:
Press the / (USB
/ ) button.
Notes:
● SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
● Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
● This USB memory’s format supports FAT 16 or FAT 32.
● SHARP cannot guarantee that all USB memory
devices will work on this audio system.
● USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
● This USB memory cannot be operated via USB hub.
● The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
● External HDD-storage cannot be played back via USB
terminal.
● If the data inside the USB memory is large, it may take
longer time for the data to be read.
Auto power off function:
In the stop mode of USB operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
E-12
04/1/28
XL-DH320N 350H_09 EN.fm
1
2
3
4
5
6
7
8
9
Listening to USB mass storage
device/MP3 player (continued)
Advanced USB playback (continued)
Notes:
● This product can play WMA and MP3 files. It will
automatically detect the file type being played. If
unplayable file is played on this product, “NO
SUPPORT” is indicated and the file will be
automatically skipped. This will take a few seconds. If
abnormal indications appear on the display due to the
unspecified file, turn off the unit and then turn it on
again.
● This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.
● The USB port is only intended for direct connection to
a USB memory device without any cable.
Advanced USB playback
The following functions are the same as CD
operations:
Page
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Notes:
● This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz)
● Playback order for MP3 files may differ depending on
the writing software used during file download.
● Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
● For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.
● Playlists are not supported on this unit.
● This unit can display Folder Name or File Name up to
32 characters.
● Maximum total number of MP3/WMA files is 1024.
Maximum total number of folders is 255 inclusive of
root directory.
● The display playback time may not be displayed
correctly when playing back a variable bitrate file.
● The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
● WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
Note:
If USB memory device is not connected, “NO MEDIA” will
be shown on the display.
Auto power on function:
When you press any of the following buttons, the unit turns
on.
● USB button on the remote control: The unit turns on
and the “USB” function is activated.
●
/ button on the main unit: The unit turns on and
playback of the last function starts (CD, TUNER, USB,
AUDIO IN, iPod).
E-13
04/1/28
XL-DH320N 350H_09 EN.fm
Listening to the radio
■
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1 Perform steps 1 - 3 in “Tuning”.
2 Press the MEMORY button.
3 Within 30 seconds, press the PRESET (
or ) button to select
the preset channel number. Store the stations in memory, in order,
starting with preset channel 1.
4 Within 30 seconds, press the MEMORY button to store that
station in memory. If the “MEMORY” and preset number indicators
disappear before the station is memorised, repeat the operation
from step 2.
CD
USB
5 Repeat steps 1 - 4 to set other stations, or to change a preset
station. When a new station is stored in the memory, the station
previously memorised for that preset channel number will be
erased.
Auto power on function:
When you press any of the following buttons, the unit turns on.
● TUNER (BAND) button (remote control only): The unit turns on
and the “TUNER” function is activated.
●
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TUNER, AUDIO IN, USB, iPod).
■
Tuning
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead become
disconnected.
■
To recall a memorised station
Press the PRESET ( or
select the desired station.
) button for less than 0.5 seconds to
1 Press the ON/STAND-BY button to turn the power on.
■
2 Press the TUNER (BAND) button repeatedly to select the desired
The stations saved in the memory can be scanned automatically.
(Preset memory scan)
frequency band (FM or AM).
3 Press the TUNING (
or ) button on the remote control to tune
in to the desired station.
● Manual tuning:
Press the TUNING ( or ) button repeatedly to tune in to
the desired station.
● Auto tuning:
When the TUNING ( or ) button is pressed for more than
0.5 seconds, scanning will start automatically and the tuner
will stop at the first receivable broadcast station.
Notes:
● When radio interference occurs, auto scan tuning may stop
automatically at that point.
● Auto scan tuning will skip weak signal stations.
● To stop the auto tuning, press the TUNING ( or ) button again.
● When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator will
light up. Finally, the station name will appear.
● Full auto tuning can be achieved for RDS stations “ASPM”, see
page 17.
To receive an FM stereo transmission:
● Press the TUNER (BAND) button to select stereo mode and “ST”
indicator will be displayed. “
” will appear when an FM
broadcast is in stereo.
● If the FM reception is weak, press the TUNER (BAND) button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
1 Press the PRESET (
or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the PRESET (
XL-DH320N 350H_09 EN.fm
or
) button again when the desired
station is located.
■
To erase entire preset memory
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Whilst pressing down the FUNCTION button, press the
E-14
04/1/28
To scan the preset stations
ON/STAND-BY button until “TUNER CLEAR” appears.
1
2
3
4
5
6
7
8
9
Using the Radio Data System (RDS)
RDS is a broadcasting service which a growing
number of FM stations provide. These FM stations
send additional signals along with their regular
programme signals. They send their station names,
and information about the type of programme such as
sport, music, etc.
When tuned to an RDS station, “RDS” and the station
name will be displayed.
“TP” (Traffic Programme) will appear on the display when
the received broadcast carries traffic information, and “TA”
(Traffic Announcement) will appear whilst a traffic
information is on air.
“PTYI” (Dynamic PTY Indicator) will appear whilst the
Dynamic PTY station is received.
■
Using the Auto Station Programme
Memory (ASPM)
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40
stations can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
1 Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2 Press and hold down the RDS ASPM button on the
remote control.
1 After “ASPM” has flashed for about 4 seconds,
scanning will start (87.50 - 108.00 MHz).
2 When an RDS station is found, “RDS” will appear
for a short time and the station will be stored in
memory.
You can control the RDS by using the buttons on the
remote control only.
■
3 After scanning, the number of stations stored in
memory will be displayed for 4 seconds, and then
“END” will appear for 4 seconds.
Information provided by RDS
Each time the RDS DISPLAY button is pressed, the
display will switch as follows:
To stop the ASPM operation before it is complete:
Press the RDS ASPM button whilst it is scanning for
stations.
The stations which are already stored in memory will be
kept there.
CD
USB
Station name (PS)
Frequency
Programme type (PTY)
Notes:
● If the same station is broadcasting on different
frequencies, the strongest frequency will be stored in
memory.
● Any station which has the same frequency as the one
stored in memory will not be stored.
● If 40 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
● If no station have been stored in memory, “END” will
appear for about 4 seconds.
● If the RDS signals are very weak, station names may
not be stored in memory.
● The same station name can be stored in different
channels.
● In a certain area or during certain time periods, the
station names may temporarily be different.
Radio text (RT)
When tuning in to a station other than an RDS station or
to an RDS station which sends weak signal, the display
will change in the following order:
NO PS
NO PTY
FM 98.80 MHz
NO RT
E-15
04/1/28
XL-DH320N 350H_09 EN.fm
Using the Radio Data System (RDS) (continued)
■
■
Notes for RDS operation
If any of the following events occur, it does not mean
that the unit is faulty:
● “PS”, “NO PS” and a station name appear alternately,
and the unit does not operate properly.
● If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
● When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
● “NO PS”, “NO PTY” or “NO RT” will flash for about
5 seconds, and then the frequency will be displayed.
Notes for radio text:
● The first 8 characters of the radio text will appear for
4 seconds and then they will scroll across the display.
● If you tune in to an RDS station which is not
broadcasting any radio text, “NO RT” will be displayed
when you switch to the radio text position.
● Whilst radio text data is received or when the text
contents change, “RT” will be displayed.
To recall stations in memory
To specify programmed types and select stations
(PTY search):
You can search a station by specifying the programme
type (news, sports, traffic programme, etc. ... see page 17)
from the stations in memory.
1 Press the TUNER button on the remote control or
FUNCTION button repeatedly on the main unit to
select TUNER function.
2 Press the RDS PTY button on the remote control.
“SELECT” and “PTY TI” will appear alternately for
about 6 seconds.
3 Within 6 seconds, press the
or
button to select
the programme type.
Each time the button is pressed, the programme type
will appear. If the button is held down for more than
0.5 seconds, the programme type will appear
continuously.
4 Whilst the selected programme type is flashing (within
6 seconds), press the RDS PTY button again.
After the selected programme type has been lit for 2
seconds, “SEARCH” will appear, and the search
operation will start.
Notes:
● If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type, the
corresponding channel number will lit for about 8
seconds, and then the station name will remain it.
● If you want to listen to the same programme type of
another station, press the RDS PTY button whilst the
channel number or station name is flashing. The unit
will look for the next station.
● If no station can be found, “NOT FOUND” will appear
for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, “TP” will
appear.
(This does not mean that you can listen to the traffic
information at that time.)
When the traffic information is broadcast, “TA” will appear.
E-16
04/1/28
XL-DH320N 350H_09 EN.fm
1
2
3
4
5
6
7
8
9
Using the Radio Data System (RDS) (continued)
Descriptions of the PTY (Programme Type) codes, TP
(Traffic Programme) and TA (Traffic Announcement)
You can search for and receive the following PTY, TP and
TA signals.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
Short accounts of facts, events and
publicly expressed views, reportage and
actuality.
Topical programme expanding or
enlarging upon the news, generally in
different presentation style or concept,
including debate, or analysis.
Programmes whose purpose is to impart
advice in the widest sense.
Programme concerned with any aspect
of sport.
Programme intended primarily to
educate, of which the formal element is
fundamental.
All radio plays and serials.
Programmes concerned with any aspect
of national or regional culture, including
language, theatre, etc.
Programmes about the natural sciences
and technology.
Used for mainly speech-based
programmes usually of lightentertainment nature, not covered by
other categories. Examples include:
quizzes, panel games, personality
interviews.
Commercial music, which would
generally be considered to be of current
popular appeal, often featuring in current
or recent record sales charts.
Contemporary modern music, usually
written and performed by young
musicians.
Current contemporary music considered
to be “easy-listening”, as opposed to
Pop, Rock or Classical, or one of the
specialised music styles, Jazz, Folk or
Country. Music in this category is often
but not always, vocal, and usually of
short duration.
Classical music for general, rather than
specialist appreciation. Examples of
music in this category are instrumental
music, and vocal or choral works.
Performances of major orchestral works,
symphonies, chamber music, etc., and
including Grand Opera.
Musical styles not fitting into any of the
other categories. Particularly used for
specialist music of which Rhythm &
Blues and Reggae are examples.
Weather reports and forecasts and
meteorological information.
Stock Market reports, commerce,
trading, etc.
For programmes targeted at a young
audience, primarily for entertainment
and interest, rather than where the
objective is to educate.
Programmes about people and things
that influence them individually or in
groups. Includes: sociology, history,
geography, psychology and society.
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
TEST
ALARM !
NONE
TP
TA
E-17
04/1/28
XL-DH320N 350H_09 EN.fm
Any aspect of beliefs and faiths, involving
a God or Gods, the nature of existence
and ethics.
Involving members of the public
expressing their views either by phone or
at a public forum.
Features and programmes concerned
with travel to near and far destinations,
package tours and travel ideas and
opportunities. Not for use for
announcements about problems, delays,
or roadworks affecting immediate travel
where TP/TA should be used.
Programmes concerned with
recreational activities in which the
listener might participate. Examples
include, Gardening, Fishing, Antique
collecting, Cooking, Food & Wine, etc.
Polyphonic, syncopated music
characterised by improvisation.
Songs which originate from, or continue
the musical tradition of the American
Southern States. Characterised by a
straightforward melody and narrative
story line.
Current Popular Music of the Nation or
Region in that country's language, as
opposed to International “Pop” which is
usually US or UK inspired and in English.
Music from the so-called “golden age” of
popular music.
Music which has its roots in the musical
culture of a particular nation, usually
played on acoustic instruments. The
narrative or story may be based on
historical events or people.
Programme concerned with factual
matters, presented in an investigative
style.
Broadcast when testing emergency
broadcast equipment or receivers.
Emergency announcement made under
exceptional circumstances to give
warning of events causing danger of a
general nature.
No programme type (receive only).
Broadcasts which carry traffic
announcements.
Traffic announcements are being
broadcast.
Timer and sleep operation (Remote control only)
■
Timer playback
Before setting timer:
● Check that the clock is set to the correct time (refer to
page 6). If it is not set, you cannot use the timer
function.
● For timer playback: Plug in USB or load discs or dock
iPod to be played.
CD
USB
1 Press the ON/STAND-BY button to turn the power on.
2 Press and hold the CLOCK/TIMER button.
3 Within 10 seconds, press the
or
button to
select “ONCE SET” or “DAILY SET”, and press the
MEMORY button. Set the clock to the correct time if
“ONCE SET” or “DAILY SET” does not appear.
Timer playback:
The unit turns on and plays the desired source (CD,
TUNER, USB, iPod, AUDIO IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer:
Once timer play works for one time only at a preset time.
Daily timer:
Daily timer play works at the same preset time every day.
For example, set the timer as a wake-up call every
morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio
programme, and use the daily timer to wake up.
4 Within 10 seconds, press the
or
button to
select “TIMER SET”, and press the MEMORY button.
5 To adjust the hour, press the
6 To adjust the minutes, press the
Start
button and
8 To select the timer playback source (CD, TUNER, USB,
iPod or AUDIO IN), press the
or
button. Press
the MEMORY button.
When you select the tuner, select a station by pressing
the
or
button, and then press the MEMORY
button. If a station has not been programmed, “NO
PRESET” will be displayed and timer setting will be
cancelled.
9 Adjust the volume using the VOLUME control, and then
press the MEMORY button. Do not turn the volume up
too high.
Once timer
Stop
or
7 Set the time to finish as in steps 5 and 6 above.
2 Set the once timer (pages 18 - 19).
Daily timer
button and then
then press the MEMORY button.
1 Set the daily timer (pages 18 - 19).
1 minute or more
or
press the MEMORY button.
Start
Stop
10 Press the ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
11 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The “ ” indicator will blink during timer
playback.
The “DAILY” indicator will blink during timer playback.
E-18
04/1/28
XL-DH320N 350H_09 EN.fm
1
2
3
4
5
6
7
8
9
Timer and sleep operation (Remote control only) (continued)
12 When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is cancelled.
Cancel the daily timer when it is not in use.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN socket,
select “USB” or “AUDIO IN” in step 8.
● This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
“Cancelling the timer setting” of this page.
Checking the timer setting:
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“ONCE SET” or “DAILY SET”, and press the MEMORY
button.
3 Within 10 seconds, press the
or
button to select
“TIMER CALL”, and press the MEMORY button.
■
Sleep operation
The radio, compact disc, iPod and USB can all be turned
off automatically.
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 10 seconds, press the SLEEP button repeatedly
to select the time.
10
20
30
....... 80
90
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1 Whilst “SLEEP” is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting
the unit to the stand-by mode, proceed as follows.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
2 Within 10 seconds, press the SLEEP button repeatedly
Cancelling the timer setting:
to select “SLEEP 00”.
1 Turn the power on and press and hold down the
CLOCK/TIMER button.
2 Within 10 seconds, press the
■
3 Within 10 seconds, press the
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
or
button to select
“ONCE SET” or “DAILY SET”, and press the MEMORY
button.
or
button to select
“TIMER OFF”, and press the MEMORY button. Timer
will be cancelled (the setting will not be cancelled).
To use timer and sleep operation together
1 Set the sleep time (see above, steps 1 - 5).
2 Whilst the sleep timer is set, set the timer playback
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1 Turn the power on and press and hold down the
(steps 2 - 9, page 18).
Sleep timer
setting
Timer playback
setting
End
time
CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“ONCE SET” or “DAILY SET”, and press the MEMORY
button.
3 Within 10 seconds, press the
or
button to select
“TIMER ON” , and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power
stand-by mode.
E-19
04/1/28
XL-DH320N 350H_09 EN.fm
90 minutes
Sleep operation will
automatically stop
Desired time
Timer playback
start time
Enhancing your system
Troubleshooting chart
The connection lead is not included. Purchase a
commercially available lead as shown below.
Many potential problems can be resolved by the owner
without calling a service technician.
If something is wrong with this product, check the following
before calling your authorised SHARP dealer or service
centre.
Portable audio
player, etc.
■
Audio cable
(not supplied)
General
Symptom
● Did a power failure occur?
Reset the clock. (Refer
page 6)
● When a button is
pressed, the unit
does not respond.
● Set the unit to the power
stand-by mode and then
turn it back on.
● If the unit still malfunctions,
reset it. (Refer page 21)
● No sound is heard.
● Is the volume level set to
“0”?
● Are the headphones
connected?
● Are the speaker wires
disconnected?
MICRO COMPONENT SYSTEM
XL-DH320
Auto power on function (AUDIO IN):
When you press any of the following buttons, the unit turns
on.
● AUDIO IN button on the remote control: The unit turns
on and the “AUDIO IN” function is activated.
●
/ button on the main unit: The unit turns on and
playback of the last function starts (CD, TUNER,
AUDIO IN, USB, iPod).
■
Listening to the playback sounds of
portable audio player, etc.
1 Use a connection lead to connect the portable audio
player etc. to the AUDIO IN socket. When using video
equipment, connect the audio output to this unit and the
video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the AUDIO IN button on the remote control or
FUNCTION button repeatedly on main unit to select
AUDIO IN function.
4 Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase
the volume of the connected device.
■
CD player
Symptom
● Playback does not
start.
● Playback stops in
the middle or is not
performed properly.
Possible cause
● Is the disc loaded upside
down?
● Does the disc satisfy the
standards?
● Is the disc distorted or
scratched?
● Playback sounds are ● Is the unit located near
skipped, or stopped
excessive vibrations?
in the middle of a
● Is the disc very dirty?
track.
● Has condensation formed
inside the unit?
■
Remote control
Symptom
● The remote control
does not operate.
Note:
To prevent noise interference, place the unit away from the
television.
■
Possible cause
● The clock is not set
to the correct time.
Possible cause
● Is the AC power lead of the
unit plugged in?
● Is the battery polarity
correct?
● Are the batteries dead?
● Is the distance or angle
incorrect?
● Does the remote control
sensor receive strong
light?
Headphones
● Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
● Before plugging in or unplugging the headphones,
reduce the volume.
● Be sure your headphones have a 3.5 mm (1/8")
diameter plug and impedance between 16 and 50
ohms. The recommended impedance is 32 ohms.
● Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
■
Symptom
● The radio makes
unusual noises
continuously.
E-20
04/1/28
XL-DH320N 350H_09 EN.fm
Tuner
Possible cause
● Is the unit placed near the
TV or computer?
● Is the FM aerial or AM loop
aerial placed properly?
Move the aerial away from
the AC power lead if it is
located nearby.
1
2
3
4
5
6
7
8
9
Troubleshooting chart (continued)
■
■
USB
Symptom
● Device cannot be
detected.
● Playback does not
start.
● Wrong time display.
● Wrong file name
display.
Possible cause
● Is there any MP3/WMA file
available?
● Is the device properly
connected?
● Is it an MTP device?
● Does the device contain
AAC file only?
● Is it a copyright protected
WMA file?
● Is it a false MP3 file?
● Is Variable Bitrate file being
played back?
● Is the File Name written in
Chinese or Japanese
characters?
1 Press the ON/STAND-BY button to enter the power
stand-by mode.
2 Whilst pressing down the OPEN/CLOSE button, press
the ON/STAND-BY button until “ALL CLEAR” appears.
Caution:
This operation will erase all data stored in memory
including clock, timer settings, tuner preset, and CD
programme.
■
■
iPod
Symptom
● No sound is
produced.
No image appears
on the TV/monitor.
Possible cause
● The iPod is not playing.
● The iPod is not properly
connected to the unit.
● Is the AC power lead of the
unit plugged in?
● The video cable is not
properly connected.
● The TV/monitor’s input
selection is not properly
set.
● iPod will not charge. ● Wrong iPod adaptor is
used.
● The iPod is not making full
contact with the iPod
connector.
● The main unit is in stand-by
mode.
● Using 3rd generation iPod.
■
Condensation
If problem occurs
■
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on
again.
2 If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
NO
YES
Correct
■
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
● Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
● Do not apply oil to the inside of the unit. It may cause
malfunctions.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
E-21
XL-DH320N 350H_09 EN.fm
Care of compact discs
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on the
disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
● Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.
● Keep your discs away from direct sunlight, heat, and
excessive moisture.
● Always hold the CDs by the edges. Fingerprints, dirt, or
water on the CDs can cause noise or mistracking. If a
CD is dirty or does not play properly, clean it with a soft,
dry cloth, wiping straight out from the centre, along the
radius.
Maintenance
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
04/1/28
Before transporting the unit
Remove the iPod, USB memory device and disc from the
un it. Then, set the unit to the power stand-by mode.
Carrying the unit with iPod or USB memory device left
docked or discs left inside might damage the unit.
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter on
the remote control. Condensation can cause the unit to
malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
■
Factory reset, clearing all memory
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
■
General
Power source
AC 220 - 240 V ~ 50/60 Hz
Power
consumption
XL-DH320NH
Power on: 45 W
Power stand-by: 0.4 W (*)
Power
consumption
XL-DH350NH
Power on: 50 W
Power stand-by: 0.4 W (*)
Dimensions
Width: 165 mm (6-1/2")
Height: 220 mm (8-2/3)
Depth: 235 mm (9-1/4")
Weight
XL-DH320NH
4 kg (8.8 lbs.)
Weight
XL-DH350NH
4 kg (8.8 lbs.)
( * ) This power consumption value is obtained when the
main unit power switch is turn OFF.
■
USB
USB host interface ● Complies with USB 1.1 (Full
Speed)/ 2.0 Mass Storage
Class.
● Support Bulk only and CBI
protocol.
Support file
● MPEG 1 Layer 3
● WMA (Non DRM)
Bitrate support
● MP3 (32 ~ 320 kbps)
● WMA (64 ~ 160 kbps)
Other
● Maximum total number of
MP3/WMA files is 1024.
● Maximum total number of
folders is 255 INCLUSIVE of
root directory.
● The ID3TAG information
supported are TITLE, ARTIST
and ALBUM only.
● Supports ID3TAG version 1
and version 2.
File system
● Support USB devices with
Microsoft Windows/DOS/FAT
support
12/FAT 16/ FAT 32.
● 2 kbyte block length for sector.
■
Tuner
Frequency range
■
Amplifier
Output power
XL-DH320NH
Output power
XL-DH350NH
PMPO: 200 W
MPO: 100 W (50 W + 50 W)
(10% T.H.D.)
RMS: 100 W (50 W + 50 W)
(10% T.H.D.)
RMS: 66 W (33 W + 33 W)
(1% T.H.D.)
PMPO: 320 W
MPO: 160 W (80 W + 80 W)
(10% T.H.D.)
RMS: 160 W (80 W + 80 W)
(10% T.H.D.)
RMS: 100 W (50 W + 50 W)
(1% T.H.D.)
■
Speaker (CP-DH320NH)
Type
2-way type speaker system
5 cm (2") tweeter
10 cm (4") woofer
Maximum input
power
100 W
Rated input power
50 W
Impedance
4 ohms
Dimensions
Width: 148 mm (5-13/16")
Height: 220 mm (10-1/4")
Depth: 163 mm (6-7/16")
Weight
1.63 kg (3.60 lbs.)/each
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Input terminals
■
Audio In (audio signal):
250 mV/47 k ohms
CD player
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
■
Speaker (CP-DH350NH)
Type
2-way type speaker system
5 cm (2") tweeter
12 cm (4-3/4") woofer
Maximum input
power
160 W
Type
Single disc multi-play compact disc
player
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
Rated input power
80 W
Impedance
4 ohms
D/A converter
Multi bit D/A converter
Dimensions
Frequency
response
20 - 20,000 Hz
Width: 165 mm (6-1/2")
Height: 220 mm (10-1/4")
Depth: 181 mm (7-1/8")
Dynamic range
90 dB (1 kHz)
Weight
1.85 kg (4.10 lbs.)/each
E-22
04/1/28
XL-DH320N 350H_09 EN.fm
1
2
3
4
5
6
7
8
9
TINSZA501AWZZ
XL-DH320N 350NH_Back
097 R AS 1
2009July16
XL-DH320NH / XL-DH350NH
UP
MICRO COMPONENT SYSTEM
DOWN