Windsor T708 Operating instructions

Wet / Dry Vacuums
Operating instructions (ENG)
MODELS:
T708
10130060
T708IE
10130070
T716
10130080
T716IE
10130090
T720TP
10130100
Read these instructions before using the machine.
86369590-B
12/11/12
IPX4
Machine Data Label
Overview
This machine is a commercial vacuum designed for wet and dry pick-up.
Warranty Registration
Thank you for purchasing a Windsor product. Warranty registration is quick and easy.
Your registration will allow us to serve you better over the lifetime of the product.
To register your product go to :
www.windsorind.com/WarrantyRegistration.aspx
For customer assistance:
1-800-444-7654
2
86369590 Titan Vacuum
Table of Contents
Machine Data Label . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
How To Use This Manual . . . . . . . . . . . . . . . . . . . . . 4
Safety
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . 5
Grounding Instructions:. . . . . . . . . . . . . . . . . . . . . . . 7
Operations
Vacuum And Accessories Components . . . . . . . . . . 8
Maintenance
Periodic Maintenance . . . . . . . . . . . . . . . . . . . . . . . 10
Servicing the Filter . . . . . . . . . . . . . . . . . . . . . . . . . 10
Servicing the Vac Motor . . . . . . . . . . . . . . . . . . . . . 10
Servicing The Vac Motor. . . . . . . . . . . . . . . . . . . . . 11
Parts
Vacuum Motor Assembly - T708 / T708IE . . . . . .
Vacuum Motor Assembly - T716 / T720TP. . . . . .
Filter Group T708 . . . . . . . . . . . . . . . . . . . . . . . . .
Filter T716 / T720TP . . . . . . . . . . . . . . . . . . . . . . .
Tank T708. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tank T716. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tank and Cart - T720TP . . . . . . . . . . . . . . . . . . . .
Front Mounted Squeegee - TSQ16. . . . . . . . . . . .
Front Mounted Squeegee - TSQ20. . . . . . . . . . . .
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Suggested Spare Parts. . . . . . . . . . . . . . . . . . . . .
14
16
18
20
22
24
26
28
30
32
33
86369590 Titan Vacuum
3
How To Use This Manual
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts lists
include a number of columns of information:
This manual contains the following sections:
•
•
•
•
•
How to Use This Manual
Safety
Operations
Maintenance
Parts List
•
•
The HOW TO USE THIS MANUAL section will tell you
how to find important information for ordering correct
repair parts.
•
•
•
Parts may be ordered from authorized dealers. When
placing an order for parts, the machine model and
machine serial number are important. Refer to the
MACHINE DATA box which is filled out during the
installation of your machine. The MACHINE DATA box
is located on the inside of the front cover of this manual.
•
Model:
Date of Purchase:
Serial Number:
•
Dealer:
Address:
REF – column refers to the reference number
on the parts illustration.
PART NO. – column lists the part number for
the part.
ALT NO. – reference number.
QTY – column lists the quantity of the part used
in that area of the machine.
DESCRIPTION – column is a brief description
of the part.
SERIAL NO. FROM – If this column has an (*)
and a Reference number, see the SERIAL
NUMBERS page in the back of your manual. If
column has two asterisk (**), call manufacturer
for serial number. The serial number indicates
the first machine the part number is applicable
to. The main illustration shows the most current
design of the machine. When a boxed illustration is shown, it displays the older design.
NOTES – column for information not noted by
the other columns.
Phone Number:
Sales Representative:
The model and serial number of your machine is
located on the back of the motor head under the power
cord.
The SAFETY section contains important information
regarding hazardous or unsafe practices of the
machine. Levels of hazards are identified that could
result in product damage, personal injury, or severe
injury resulting in death.
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement parts
numbers needed for ordering future parts.
NOTE: The manual part number is located on the
lower left corner of the front cover.
The OPERATIONS section is to familiarize the operator
with the operation and function of the machine.
The MAINTENANCE section contains preventive maintenance to keep the machine and its components in
good working condition.
4
86369590 Titan Vacuum
Safety
IMPORTANT SAFETY INSTRUCTIONS
When using this machine, basic precaution
must always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
To reduce the risk of fire, electric shock, or injury:
Failure to read and observe all DANGER statements could result in severe bodily injury
or death. Read and observe all DANGER statements found in your Owner’s Manual
and on your machine.
Failure to read and observe all WARNING statements could result in injury to you or to
other personnel; property damage could occur as well. Read and observe all
WARNING statements found in your Owner’s Manual and on your machine.
Failure to read and observe all CAUTION statements could result in damage to the
machine or to other property. Read and observe all CAUTION statements found in your
Owner’s Manual and on your machine.
Read the Owner’s Manual prior to operating or attempting any service or maintenance procedure to your machine.
You must have training in the operation of this machine before using it. If the operator(s) cannot read English, have
this manual explained fully before attempting to operate this machine.
Do not operate this machine until it is completely assembled. Inspect the machine carefully before operation. Use
only as described in this manual. Use only the manufacturer’s recommended attachments.
Do not use this machine with or near fuels, grain dust, solvents, thinners, or other flammable materials.
Do not pick up flammable fluids, dust or vapors.
Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
This machine is not suitable for picking up health endangering dust.
Do not use the machine if the power cord is damaged. Do not use the electrical cord to move the machine. Keep
cord away from heated surfaces. Do not unplug by pulling on the cord; grasp the plug, not the cord. Turn off all
controls before unplugging. Do not close a door on cord or pull around sharp edges or corners.
Disconnect the power supply before attempting any maintenance or service.
Read all machine labels before attempting to operate the machine. Make sure all of the labels are attached or
fastened to the machine. Get replacement labels and decals from the manufacturer’s distributor.
Keep the electrical components of the machine dry. Always store the machine in a dry area.
Do not use this machine as a step or furniture. Do not allow to be used as a toy. Close attention is necessary when
used by or near children.
Keep hands, feet, loose clothing, hair, fingers, and all parts of the body away from openings and moving parts.
86369590 Titan Vacuum
5
Safety
Do not handle plug or appliance with wet hands.
Always install float before any wet pick-up operation.
Before opening cover, switch off machine. Wait until the fan stops completely or dust and debris may be ejected.
If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to
an Authorized service center.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything
that may reduce air flow.
Do not use the machine without the dust bag and/or filters in place.
Use extra caution when cleaning on stairs.
Always use a 3-wire electrical system connected to the electrical ground. Whenever possible connect the machine
to an outlet protected by a ground fault interrupter (GFCI). See “Grounding Instructions.”
READ AND SAVE THESE INSTRUCTIONS
6
86369590 Titan Vacuum
Safety
Grounding Instructions:
This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an
equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a
qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not
modify the plug provided with the appliance - if it will not fit the outlet , have a proper outlet installed by a qualified
electrician.
This Product Is For Commercial Use Only.
Electrical:
The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below
those indicated on the data label will cause serious damage to the motors.
Extension Cords:
If an extension cord is used, the wire size must be at least one size larger than the power cord on the machine, and
must be limited to 50 feet (15.5m) in length.
86369590 Titan Vacuum
7
Operations
Vacuum And Accessories Components
A. Motor Block
B. On/Off Switch
Important Instructions
C. Float: Keeps liquid out of Motor Block
D. Polyester Filter: Remove for use with liquids
E. Hooks: Secure Motor Block to Tank
F.
NOTE: The Polyester Filter must be cleaned after
each use to maintain efficient suction.
•
•
Suction Inlet
G. Tank
•
H. 2-pc. Chrome Wand
I.
10-ft. x 1-1/2" Flexible Hose
J.
2-pc PVC Wand
•
K. 3" Round Brush
L. Crevice Tool
•
M. 16" Brush
N. 16" Squeegee
O. Fixed Carpet Tool
•
•
8
Before use, the equipment must be correctly
assembled with all its components.
Check that electrical outlet is correct for use
with the plug on the machine.
Before connecting, check that the specified
motor voltage corresponds to the main voltage
available.
Never use the equipment near inflammable,
explosive or toxic substances: sparks from the
motor could cause dangerous reactions.
Always unplug the machine from electrical
outlet when leaving machine unattended or
before attempting any repair.
Service and repair should be done by qualified
personnel only.
Use only original manufacturer’s replacement
parts.
86369590 Titan Vacuum
Operations
This machine is a commercial vacuum designed for wet
and dry pick-up.
Dry soil can be vacuumed directly into the tank. To
empty the tank of dry soil, remove the top and dump
into trash receptacle.
For wet pick-up, remove polyester filter. The machine is
equipped with a float shut-off. As the tank is filled to
capacity, a float rises and seals the vac intake, causing
loss of vacuum. Switch off the vacuum when this
happens and bring the machine to a floor drain.
Use the convenient drain hose at the back of the
vacuum to empty the tank.
With both wet and dry applications be sure to frequently
clean the filter. This is especially true when the vacuum
is being used with strippers and wax.
Strippers and some detergents produce foam which will
damage the vac motors. The vac shut-off may not be
sensitive to all foams. Be sure to check that the tank is
not filling with foam. Use a defoaming agent to avoid
pulling foam through vac motor. Should vac motor
become wet, remove source of overflow and immediately run vac motor open to dry.
At the end of each working day:
1. After each use, rinse tank with fresh water. Periodically inspect the recovery tank and decontaminate
if necessary, using a Hospital Grade Virucide or a
1:10 bleach to water solution. Waste water should
be disposed of properly.
2. Remove head assembly and allow tank to dry.
3. Remove filters for cleaning or to allow to dry.
4. Inspect hoses for wear. Frayed or cracked hoses
should be replaced to avoid vacuum loss.
5. Inspect power cord for wear. This cable will lay on
wet surfaces. To prevent electrical shock replace
cords with frayed or cracked insulation immediately.
86369590 Titan Vacuum
9
Maintenance
Periodic Maintenance
(Every six to twelve months):
1. Check filter for wear, replace dirt saturated filters that do
not respond to normal cleaning.
2. Inspect gasket seals and replace those which have
begun to leak.
3. Examine carbon motor brushes and commutator.
Replace both carbon brushes when either is less
than 3/8" long.
(P/N 8.616-352.0) 120V, (P/N 8.616-353.0) 230V
Servicing the Filter
The filter is accessed by lifting the head assembly off the tank.
Polyester filter is easily removed by simply lifting the filter basket out of the tank.
Cartridge filters – Remove the filter retainer by turning the black knob 90 degrees counter-clockwise.
Cartridge filter will then slide off of float assembly.
NOTE: Be sure to frequently clean the filter. Allow filter to dry after being used for wet pick-up. Filters used for wet
pick-up including stripper must be thoroughly cleaned before being allowed to dry. Worn filters can affect vacuum
performance. Replace the filter when it becomes worn out and normal cleaning will not restore vac performance.
Servicing the Vac Motor
Motor Replacement
1. Disconnect power cord from power source.
2. To access the vac motor, remove the screws that attach the main cover to the head assembly and set the cover
to one side.
3. Disconnect the motor ’s 2 red lead wires from the main switch.
4. Disconnect green/yellow wire by removing screw from motor core.
5. Remove the four motor mounting screws.
6. Remove motor plate and set aside.
7. Take out the motor and remove the upper and lower gaskets.
8. Inspect gaskets. If they shown any wear or tear in the material, replace.
9. Install gaskets onto new motor. Make sure gaskets are properly seated.
10. Install the new motor. Make sure foam mufflers are positioned properly.
11. Attach motor plate to motor.
12. Connect green/yellow wire to motor core.
13. Connect motor ’s 2 red lead wires to main switch.
14. Re-assemble vac cover.
15. Test for proper operation.
10
86369590 Titan Vacuum
Maintenance
Servicing The Vac Motor
Carbon Brush Replacement
1. Disconnect power cord from power source.
2. To access the vac motor, remove the screws that
attach the main cover to the head assembly and
set the cover to one side.
3. Remove the motor cover by removing two screws.
See Figure 1
4. Remove the wire terminal from carbon brush
housing. See Figure 2
5. Remove the carbon brush assembly by removing
the 2 screws that attach it to the vac motor. See
Figure 3
6. Inspect armature commutator. If it is extremely
pitted, grooved or not concentric then the motor will
need to be replaced or sent to a qualified service
center.
Figure 1
7. Slide the yellow brush housing from plastic holder.
See Figure 4
8. Reverse steps 7 through 4 to install new brush and
housing (part number S8TOEG845 120 V S8TOGB839 230 V)
9. Repeat steps 4 through 8 for the other carbon
brush.
10. Reverse steps 3 and 2 for re-assembly.
11. Test for proper operation
Figure 2
Figure 3
Figure 4
86369590 Titan Vacuum
11
Notes:
12
86369590 Titan Vacuum
Parts
PARTS
86369590 Titan Vacuum
13
Vacuum Motor Assembly - T708 / T708IE
14
86369590 Titan Vacuum
Vacuum Motor Assembly - T708 / T708IE
REF
PART NO.
PRV NO.
QTY
1A
1B
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20A
20B
21
22
23
8.616-284.0
8.616-283.0
8.616-407.0
8.616-421.0
8.616-386.0
8.616-422.0
8.616-328.0
8.616-386.0
8.616-389.0
8.616-287.0
8.616-415.0
8.616-312.0
8.616-388.0
8.616-285.0
8.616-321.0
8.616-378.0
8.616-311.0
8.616-348.0
8.616-320.0
8.616-347.0
8.616-351.0
8.616-294.0
8.616-261.0
8.616-341.0
S81122
S80117
S80138
S80139
S81006
S80450
S83733AUG6
S82627
S81006
S81054
S83734AUB.LAB
S80326
S83937
S81050
S82738AUG6
S83969
S80310
S83900
S82591AUG6
S83901
S81120S
S83891S
S83866
S81189GG6
T9008
1
1
2
1
1
4
2
2
1
1
1
6
1
1
1
1
1
2
1
1
1
1
1
DESCRIPTION
SERIAL NO.
FROM
NOTES
CORD, 120 VOLT
CORD, 230 VOLT
STRAIN RELIEF
TERMINAL CLIP
SCREW, 5 X 20
TERMINAL BLOCK
HANDLE, GRAY
SCREW, 5 X 40
SCREW, 5 X 20
SCREW, 5 X 30
COVER
SWITCH, ON/OFF
FILTER, Ø95
SCREW, 5 X 35
COVER, MOTOR, GRAY
GASKET
RING
FILTER
MOTOR RING, GRAY
GASKET
MOTOR, 120 VOLT
MOTOR, 230 VOLT
DISK, NOISE REDUCTION
BASE, MOTOR, GRAY
LABEL, WINDSOR LOGO
86369590 Titan Vacuum
15
Vacuum Motor Assembly -
16
86369590 Titan Vacuum
Vacuum Motor Assembly - T716 / T720TP
REF
PART NO.
ALT NO.
QTY
1A
1B
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23A
23B
24
25
26
27
28
29
8.616-284.0
8.616-283.0
8.616-407.0
8.616-421.0
8.616-386.0
8.616-389.0
8.616-329.0
8.616-392.0
8.616-385.0
8.616-423.0
8.616-288.0
8.616-415.0
8.616-312.0
8.616-318.0
8.616-274.0
8.616-286.0
8.616-349.0
8.616-422.0
8.616-321.0
8.616-378.0
8.616-320.0
8.616-347.0
8.616-351.0
8.616-350.0
8.616-310.0
8.616-264.0
8.616-263.0
8.616-341.0
S81122
S80117
S80138
S80139
S81006
S81054
S86097AUG6
S81979
S81005
S80490
S86070AUB.LAB
S80326
S83937
S81502
S83383
S82957AUG6
S82627
S82937AUG6
S81004
S80450
S83969
S80310
S83901
S81120S
S83891S
S83451
S82454
S83456
S83519
S83108GG6
T9008
1
1
2
4
1
2
2
1
1
1
1
1
2
1
9
1
1
1
1
1
3
1
1
2
3
3
1
1
1
DESCRIPTION
SERIAL NO.
FROM
NOTES
CORD, 120 VOLT
CORD, 230 VOLT
STRAIN RELIEF
TERMINAL CLIP
SCREW, 5 X 20
SCREW, 5 X 50
HANDLE, GRAY
SCREW, 5 X 25
SCREW, 5 X 14
TERMINAL BLOCK
COVER, BLUE
SWITCH, ON/OFF
FILTER
GASKET
CAP
COVER, GRAY
SCREW, 5 X 40
MOTOR BASE, GRAY
SCREW, 3 X 19
TERMINAL BLOCK
GASKET
RING
L-GASKET
MOTOR, 120 VOLT
MOTOR, 230 VOLT
MOTOR SEAL
FILTER
FILTER
BASE PLUG
BASE
LABEL, WINDSOR LOGO
86369590 Titan Vacuum
17
Filter Group T708
18
86369590 Titan Vacuum
Filter Group T708
REF
PART NO.
ALT NO.
QTY
1
2
3
4
5
6
7
8
86162730
86163950
86162690
86163080
86163150
86163050
86164130
S83706
S83724
S82823
S83138
S82676
S80123
S82860
S82859
4
4
1
1
1
1
1
1
DESCRIPTION
SERIAL NO.
FROM
NOTES
BUSHING
SCREW, 5 X 25
BODY, FILTER SUPPORT
FILTER/STRAINER
FLOAT
RING, FILTER
FILTER BAG
SUPPORT, FILTER BAG
86369590 Titan Vacuum
19
Filter T716 / T720TP
20
86369590 Titan Vacuum
Filter T716 / T720TP
REF
PART NO.
ALT NO.
QTY
1
2
3
4
5
6
7
8
9
10
86162730
86163950
86162690
86164080
86163150
86163010
86163020
86164120
86163030
86163040
S83706
S83724
S82823
S83117
S82676
S80473
S82845
S82833
S82852
S82855
4
4
1
1
1
1
1
1
1
1
DESCRIPTION
SERIAL NO.
FROM
NOTES
BUSHING
SCREW, 5X25
BODY, FILTER SUPPORT
STRAINER
FLOAT
FILTER RING
FILTER BAG
SUPPORT, FILTER
FILTER – OPTIONAL
FILTER RETAINER – OPTIONAL
86369590 Titan Vacuum
21
Tank T708
22
86369590 Titan Vacuum
Tank T708
REF
1
2
3
4
5
6
7
8
9
10
11
12
PART NO.
ALT NO.
86164190
S82599
86163800
S81300
86164160
S81847G6
86163880
S81050
86163190
S82846
86163770 S82585AG6BL
86164010
S82608
86164180
S82593
86163710
S82594BL
86163360 S82583AG6BL
86162760
S80558
86163400
T9007
QTY
DESCRIPTION
1
4
2
4
1
1
1
1
1
1
6
1
TANK
RIVET, 5 X 24.5
TANK CLAMP
SCREW, M5 X 35
GASKET
RETAINER, TANK ADAPTER
SPRING, PUSH BUTTON
TANK DEFLECTOR
PUSH BUTTON, TWO-PIECE, BLUE
HOSE ADAPTER, BLUE
CASTER
LABEL, TITAN
86369590 Titan Vacuum
SERIAL NO.
FROM
NOTES
23
Tank T716
24
86369590 Titan Vacuum
Tank T716
REF
PART NO.
ALT NO.
QTY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
86163270
86164200
86163870
86163760
86163190
86164180
86162560
86163800
86164160
86163880
86163670
86164090
86164100
86163810
86164310
86163930
86164110
86164300
86162750
86162600
86164000
86163860
86162580
86163570
86163170
86162980
86162800
86162950
86163940
86162810
86163690
86163300
S82558V
S82637
S81026
S82584AG6
S82846
S82593
S82652AG6
S81300
S81847G6
S81050
S83883
S81072
S81860
S81302
S82559
S82680
S82556
S80904
S82557
S83835
S82607
S81006
S82555
S80834
S80256
S82763
S83308
S82765
S83156
S82788
S82812
S82764
S86250
1
1
4
1
1
1
1
4
2
8
8
2
2
2
2
8
2
2
2
2
2
8
1
1
1
1
1
1
1
1
1
1
2
34
86163710
S82594BL
1
35
86163400
T9007
1
DESCRIPTION
SERIAL NO
FROM
NOTES
HANDLE
TANK – 400
SCREW, M5X
RETAINER, TANK
GASKET
DEFLECTOR, TANK
ADAPTER
RIVET, 5 X 24.5
CLAMP
SCREW, M8 X 15
PLASTIC WASHER
SUPPORT, HANDLE
SUPPORT
RIVET, M5 X 19
WHEEL CASTER
SCREW, M8 X 15
SUPPORT, AXLE
WHEEL
CAP, END
AXLE CAP
SPACER, WHEEL
SCREW, M5 X 20
AXLE
NUT, FLANGE, 1-1/4
GASKET
ELBOW
CLAMP
DRAIN TUBE
SCREW, M5 X 20
CLIP TUBE
TIE ROD, PLUG
PLUG, STOPPER
HANDGRIP
PUSH BUTTON, TWOPIECE, BLU
LABEL, TITAN
86369590 Titan Vacuum
25
Tank and Cart - T720TP
26
86369590 Titan Vacuum
Tank and Cart - T720TP
REF
PART NO.
ALT NO.
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
86164170
86163870
86163670
86163310
86163750
86163740
86164160
86163800
86162560
86164180
86163190
86163880
86163710
86163400
86162620
86163650
86163560
86164260
86164290
86164320
86164280
86163660
86162590
86163300
S82048
S81026
S83883
S83028
S82970
S82969
S81847G6
S81300
S82652AG6
S82593
S82846
S82586AG6
S81050
S82594BL
T9007
S82185
S80976
S80478
S81012
S80479
S82896
S82922
S83607
S82972
S86250
1
4
4
1
2
2
2
4
1
1
1
1
4
1
1
1
2
2
2
2
2
2
2
2
2
TANK – 400
SCREW, M5 X 30
PLASTIC WASHER
HOOK, LATCH
RELEASE SWIVEL
RELEASE KNOB
CLAMP
RIVET
HOSE ADAPTER
DEFLECTOR, TANK
GASKET
RETAINER, TANK ADAPTER
SCREW, M5 X 35
PUSH BUTTON, TWO-PIECE, BLUE
LABEL, TITAN
BASE
PLASTIC PAD
NUT, M10
WASHER, M10
WHEEL, CASTER
WHEEL
WASHER
PLASTIC RETAINER
AXLE CAP
HAND GRIP
86369590 Titan Vacuum
SERIAL NO.
FROM
NOTES
27
Front Mounted Squeegee - TSQ16
28
86369590 Titan Vacuum
Front Mounted Squeegee - TSQ16
REF
PART NO.
ALT NO.
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
86163330
86163390
86163220
86163960
86163980
86162650
-
BD705205
BD715508
BD735608
BD735607
BD735611
BD735609
BD735602
BD735601
BD715509
BD735604
1
1
2
2
2
2
2
2
2
4
11
-
BD735605
4
12
-
BD735603
18
13
14
15
16
17
86163440
86163420
86162910
BD735612
BD735609
BD705201
BD705203
BD705202
6
6
2
1
1
HOSE ASSEMBLY
HOUSING
BOLT, GUIDE WHEEL, 1/4-20 X 1.75"L.
GUIDE WHEEL
JAM NUT, 1/4-20 SERRATED FLANGED
NYLOCK NUT, 1/4-20
SLOTTED BLADE
SOLID BLADE
BLADE SUPPORT
BLADE END SCREW, 10-32 X 1/2"L, SS
BLADE END SCREW NUT, 10-32,
NYLOCK
BLADE ATTACH’T SCREW, 10-32 X 5/
8"L SS
MOUNTING BOLTS, 1/4-20 X 3/4"L
NYLOCK NUT, 1/4-20
LIFTING ARM
LATCH
CROSS MEMBER
-
86162820
BD705200
1
COMPLETE SQUEEGEE ASSEMBLY
86369590 Titan Vacuum
SERIAL NO.
FROM
NOTES
INCLUDES
PARTS 2-12
29
Front Mounted Squeegee - TSQ20
30
86369590 Titan Vacuum
Front Mounted Squeegee - TSQ20
ALT NO.
QTY
DESCRIPTION
1
2
3
4
PART
NO.
86163330
86163390
86163220
BD705205
BD715508
BD735608
BD735607
1
1
2
2
5
-
BD735611
2
6
-
BD735603
18
7
-
BD735609
2
8
-
BD735605
4
9
10
11
86163960
86163980
86162650
BD735602
BD735601
BD715509
2
2
2
12
-
BD735603
4
HOSE ASSEMBLY
HOUSING
BOLT, GUIDE WHEEL, 1/4-20 X 175"L
GUIDE WHEEL
JAM NUT, 1/4-20 SERRATED
FLANGED
BLADE ATTACH’T SCREW, 10-32 X 5/
8"L SS
NYLOCK NUT, 1/4-20
BLADE END SCREW NUT, 10-32,
NYLOCK
SLOTTED BLADE
SOLID BLADE
BLADE SUPPORT
BLADE ATTACH’T SCREW, 10-32 X 5/
8"L SS
NYLOCK NUT, 1/4-20
MOUNTING BOLTS, 1/4-20 X 3/4"L
LIFTING ARM RIGHT SIDE
LIFTING ARM LEFT SIDE
BOLT, LIFTING ARM CLAMP, 5/16-18 X
1"L
CLAMP, LIFTING ARM
CROSS MEMBER
NYLOCK NUT, 5/16-18
BOLT, PEDAL MOUNT, 1/4-20 X 3/4"L
PEDAL MOUNT
CLAMP, PEDAL MOUNT
NYLOCK NUT, 1/4-20
PEDAL ASSEMBLY
REF
13
14
15R
15L
BD735609
BD735612
86163460 BD705225R
86163450 BD705225L
4
4
1
1
16
-
BD735613
2
17
18
19
20
21
22
23
24
86162780
86162920
86163630
86162790
86163640
BD705209
BD705210
BD735614
BD735612
BD705212
BD705213
BD735609
BD705229
2
1
2
2
2
2
2
1
86369590 Titan Vacuum
SERIAL NO.
FROM
NOTES
31
Accessories
PART NO
ALT NO
DESCRIPTION
86164030
86164040
86163620
86163050
86163020
TSQ16
TSQ20
S72741
S82860
S82845
86163030
S82852
86163000
S76061
86163070
S82995
86163060
S82881
86163040
S82855
FRONT MOUNTED SQUEEGEE
FRONT MOUNTED SQUEEGEE
PAPER BAG
FILTER BAG, STANDARD FOR 708 MODEL
FILTER BAG, STANDARD FOR T716 AND T720TP
FILTER CARTRIDGE, PAPER, OPTIONAL FOR T716
AND T720TP
FILTER CARTRIDGE, WASHABLE PAPER,
OPTIONAL FOR T716 AND T720TP
FILTER CARTRIDGE, HEPA EQUIVALENT,
OPTIONAL FOR T716 AND T720TP
FILTER CARTRIDGE, HEPA EQUIVALENT,
OPTIONAL FOR T708
CARTRIDGE FILTER RETAINER, FOR T716 AND
T720TP
*Also order PN 86163040 (ALT S82855) Retainer with Filter.
32
86369590 Titan Vacuum
SERIAL NO
FROM
NOTES
*
*
*
Suggested Spare Parts
PART NO
PRV NO
DESCRIPTION
86163520
86163530
86164150
86163050
86163020
86164080
S8TOEG845
S8TOGB839
S80326
S82860
S82845
S83117
MOTOR BRUSH, 120 VOLT MOTOR
MOTOR BRUSH, 230 VOLT MOTOR
SWITCH, ON/OFF
POLYESTER FILTER, T708
POLYESTER FILTER, T716 AND T720TP
STRAINER
86369590 Titan Vacuum
SERIAL NO
FROM
NOTES
33