Mitsubishi Electric LDT323V User`s manual

USER S MANUAL
Index
Features ................................................................................................................................................................................... English-2
Important Information .............................................................................................................................................................. English-3
Declaration ............................................................................................................................................................................... English-5
Safety Precautions, Maintenance & Recommended Use ....................................................................................................... English-6
Contents ................................................................................................................................................................................... English-7
Parts Name and Functions ....................................................................................................................................................... English-8
Buttons, Switch, and Indicator .................................................................................................................................. English-8
Connectors and Terminals ........................................................................................................................................ English-9
Wireless Remote Control .......................................................................................................................................... English-10
How to Use the Wireless Remote Control ................................................................................................................ English-11
Preparation for use .................................................................................................................................................................. English-12
Flow of preparation ................................................................................................................................................... English-12
[P-1] Preparation for installation ............................................................................................................................................ English-13
Determine the installation location ............................................................................................................................ English-13
Ventilation requirements for enclosure mounting ..................................................................................................... English-13
[P-2] Installing the monitor ..................................................................................................................................................... English-14
Installing and removing the stands ........................................................................................................................... English-14
Installing the main switch cover ................................................................................................................................ English-14
Using the wall mount or ceiling mount ...................................................................................................................... English-14
Installing in the portrait position ................................................................................................................................ English-15
[P-3] Installing the speakers .................................................................................................................................................. English-16
[P-4] Connection procedure .................................................................................................................................................. English-17
Wiring diagram .......................................................................................................................................................... English-17
Prevention of disconnection of HDMI cable ............................................................................................................. English-17
Connecting with a computer (analog connection) .................................................................................................... English-18
Connecting with a computer (digital connection) ..................................................................................................... English-19
Connecting a video device (component video/HDMI device) .................................................................................. English-20
Connecting a video device (composite video/S video device)/stereo ampli er ...................................................... English-21
[P-5] Connecting the power cord to the monitor .................................................................................................................. English-22
Connecting the power source ................................................................................................................................... English-22
How to Use ............................................................................................................................................................................... English-23
Flow of How to Using ................................................................................................................................................ English-23
[U-1] Turning on all the connected devices ........................................................................................................................... English-24
Turning on external devices ...................................................................................................................................... English-24
Turning on the monitor .............................................................................................................................................. English-24
Power Management Function ................................................................................................................................... English-24
[U-2] Selecting the video input .............................................................................................................................................. English-25
[U-3] Controlling the external devices ................................................................................................................................... English-26
[U-4] Auto-setup .................................................................................................................................................................... English-26
[U-5] Selecting the picture mode ........................................................................................................................................... English-26
[U-6] Screen adjustment ........................................................................................................................................................ English-27
[U-7] Picture adjustment ........................................................................................................................................................ English-27
[U-8] Volume control .............................................................................................................................................................. English-28
[U-9] Schedule setting ........................................................................................................................................................... English-28
How to set up schedule ............................................................................................................................................. English-29
[U-10] Remote control .............................................................................................................................................................. English-30
RS-232C Remote control .......................................................................................................................................... English-30
Con guration and basic operation of OSD screen ................................................................................................................. English-32
Con guration of OSD screen .................................................................................................................................... English-32
Basic operation of OSD ............................................................................................................................................. English-33
OSD screen functions .............................................................................................................................................................. English-34
Other functions ........................................................................................................................................................................ English-42
Picture size ................................................................................................................................................................ English-42
Picture mode ............................................................................................................................................................. English-42
Audio input change ................................................................................................................................................... English-42
OSD information ........................................................................................................................................................ English-42
Control Lock mode .................................................................................................................................................... English-42
PIP, POP function ...................................................................................................................................................... English-43
Troubleshooting ....................................................................................................................................................................... English-44
Speci cations .......................................................................................................................................................................... English-45
Pin Assignment ........................................................................................................................................................................ English-46
English-1
Features
Wide-range Co lo r Temperature Adjustment
Page 34
The display color temperatures can be adjusted from 2,600 K to 10,000 K. Such a wide range adjustment is important for industries
such as broadcasters and food retailers where color accuracy and esh tones are critical.
Tiling Capability with Frame c o mpensatio n
Page 39
Up to 25 panels (5 wide x 5 high) can be combined to create a single large image (i.e., video wall) or other high-impact signage. A
frame compesation function is incorporated to compensate the width of panel bezels so that images are displayed with the utmost
accuracy.
PiP, PoP and Side-by-side
Pages 37 and 43
Picture-in-Picture and Picture-out-of-Picture are available when you want to display video content from a video input source in the
sub picture and display the PC input source in the main picture, and vice versa.
x
can display these two input sources in the Side-by-side mode, ideal for broadcasting
The native resolution as high as 1
and video-conferencing applications.
Programmable Sc heduling Func tio n
Pages 28, 29 and 38
The monitor s operating schedule can be programmed for up to seven different scheduled time intervals by time, day of the week
and input port. This allows video content from different inputs to be displayed on certain monitors within the same installation
according to the schedule, and extends the monitor s life and saves the power by turning it off during those hours or days it is not in
use.
Sc reen-saver Func tio ns
Page 40
To reduce image persistence and maximize the panel life in demanding signage applications, the LDT Series is equipped with four
screen-saver functions.
GAMMA
COOLING FAN
BRIGHTNESS
MOTION
Side Bo rder Co lor Selec t
Page 40
When the 4:3 screen is displayed, the side border color can be selected from black, gray and white.
Power-on Delay
Page 39
For installations employing numerous monitors, the power-on delay function can power up the monitors sequentially with delay
between 2-50 seconds after the power is applied. Using this function can prevent inrush current problems and reduce the overall
electrical load requirements when a single power supply is used.
Flexible Landsc ape & Portrait Po sitio ning
Page 15
Designed to enhance for heat dissipation and long-term reliability in both landscape (horizontal) and portrait (vertical) positions.
Closed Captio n
Page 39
You can display captions.
When closed-caption video signals are input, you can select to display or hide the captions on the screen.
This monitor is compliant with EIA-608-A.
English-2
Important Information
DECLARATION OF CONFORMITY
This devic e complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This devic e may not
cause harmful interferenc e, and (2) this device must ac cept any interference rec eived, including interference that may c ause
undesired operation.
U.S. Respo nsible Party: Mitsubishi Digital Elec tro nic s Americ a, Inc .
Address:
9351 Jero nimo Ro ad,
Irvine, Califo rnia 92618 U.S.A.
Tel. No .:
Type of Product:
+1 - (949) 465- 6000
Computer Monitor
Equipment Classi cation: Class B Peripheral
Model:
LDT323V (BH030)
Windows is a registered trademark of Microsoft Corporation. All other brands and produc t names are trademarks or
registered trademarks of their respec tive owners.
HDMI, the HDMI logo and High-De nition Multimedia Interface are trademarks or registered trademarks of HDMI Lic ensing
LLC.
Canadian Department o f Co mmunic atio ns Co mplianc e Statement
DOC:
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL:
Bears the C-UL Mark and is in complianc e with Canadian Safety Regulations according to CAN/CSA C22.2
No. 60950-1.
FCC Info rmatio n
1. Use the attached speci ed cables with this equipment so as not to interfere with radio and television reception.
(1) The power supply cord you use must have been approved by and comply with the safety standards of U.S.A.,
(2) Please use the supplied shielded video signal cable. Use of other cables and adapters may cause interference with radio and
television reception.
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult your dealer or an experienced radio/TV technician for help.
3. You are cautioned that changes or modi cations not expressly approved by the party responsible for compliance could void
your authority to operate the equipment.
English-3
Important Info rmation (c o ntinued)
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT S
POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO
FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have suf cient magnitude to cause electric shock.
Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been
included. Therefore, it should be read carefully in order to avoid any problems.
CAUTION
This LCD Monitor uses a lamp that contains mercury. Disposal of the lamp or the LCD Monitor with the lamp may be
regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or
the Electronic Industries Alliance.
English-4
Dec laratio n
Dec laration of the Manufac turer
We hereby certify that the color monitor LDT323V (BH030)
is in c ompliance with
Council Direc tive 2006/95/EC:
EN 60950-1
Counc il Direc tive 2004/108/EC:
EN 55022
EN 61000-3-2
EN 61000-3-3
EN 55024
and marked with
Mitsubishi Electric Corporation
2-7-3, Marunouchi,
Chiyoda-Ku
Tokyo 100-8310, Japan
Warning
This is a Class A product. In a domestic environment this product may cause radio interference, in which case the
user may be required to take adequate measures.
English-5
Safety Precautions, Maintenance & Recommended Use
FOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP AND USING
THE LCD COLOR MONITOR:
DO NOT REMOVE MONITOR BACK COVER. There are
no user serviceable parts inside and opening or removing
covers may expose you to dangerous shock hazards or
other risks.
Refer all servicing to quali ed service personnel.
Do not spill any liquids into the cabinet or use your monitor
near water.
Do not insert objects of any kind into the cabinet slots,
as they may touch dangerous voltage points, which can
be harmful or fatal or may cause electric shock, re or
equipment failure.
Do not place any heavy objects on the power cord.
Damage to the cord may cause shock or re.
Do not place this product on a sloping or unstable cart,
stand or table, as the monitor may fall, causing serious
damage to the monitor.
When operating the LCD monitor, use the power supply
cord provided with the monitor.
If no power cord is supplied with this equipment, please
contact your supplier.
For all other cases, use a power cord that matches the AC
voltage of the power outlet and has been approved by and
complies with the safety standard of your particular country.
Do not place any objects onto the monitor and do not use
the monitor outdoors.
The inside of the uorescent tube located within the LCD
monitor contains mercury. Please follow the bylaws or rules
of your municipality to dispose of the tube properly.
Do not bend power cord.
Do not use monitor in high temperature, humid, dusty, or
oily areas.
If monitor or glass is broken, do not come in contact with
the liquid crystal and handle with care.
If the LCD monitor is damaged and the liquid crystal leaks
out, do not inhale or swallow it.
Allow adequate ventilation around the monitor, so that heat
can properly dissipate. Do not block ventilated openings or
place the monitor near a radiator or other heat sources.
Do not put anything on top of the monitor.
The power cable connector is the primary means of
detaching the system from the power supply. The monitor
should be installed close to a power outlet, which is easily
accessible.
Handle with care when transporting. Save packaging for
transporting.
Please clean the holes of back cabinet to reject dirt and
dust at least once a year because of set reliability.
If using the cooling fan continuously, it s recommended to
wipe holes a minimum of once a month.
When installing the remote control batteries;
- Align the batteries according to the (+) and (-) indications
inside the case.
- Align the (-) indication of the batteries rst inside the
case.
CAUTION:
Immediately unplug your monitor from the wall outlet and refer
servicing to quali ed service personnel under the following
conditions:
When the power supply cord or plug is damaged.
If liquid has been spilled, or objects have fallen into the
monitor.
If the monitor has been exposed to rain or water.
If the monitor has been dropped or the cabinet damaged.
If the monitor does not operate normally by following
operating instructions.
Rec o mmend Use
CAUTION:
For optimum performance, allow 20 minutes for warm-up.
Rest your eyes periodically by focusing on an object at least
5 feet away. Blink often.
Position the monitor at a 90 angle to windows and other
light sources to minimize glare and re ections.
Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaning solution or glass cleaner!
Adjust the monitor s brightness, contrast, and sharpness
controls to enhance readability.
Avoid displaying xed patterns on the monitor for long
periods of time to avoid image persistence (after image
effects).
Get regular eye checkups.
Ergo no mic s
To realize the maximum ergonomic bene ts, we recommend
the following:
Use the preset Size and Position controls with standard
signals.
Use the preset Color Setting.
Use non-interlaced signals.
Do not use primary color blue on a dark background, as
it is dif cult to see and may produce eye fatigue due to
insuf cient contrast.
English-6
Contents
Your LCD monitor (LDT323V) comes with the following:
31.5" LCD Display Mo nito r
USER S MANUAL
User s Manual
LCD Monitor
Video Signal Cable
(Mini D-SUB 15-pin to
Mini D-SUB 15-pin Cable)
Screw (M4x8) x 2
(For Clamper)
Clamper x 2
(For securing the power
cord and HDMI cable)
Clamper x 2
(To prevent from falling)
Screw (3x6) x 2
(To x Main switch cover)
Main switch cover
Power Cord
Cable Holder
The following components are supplied as option.
External Speakers
Stands
English-7
Wireless Remote
Control and AAA
Batteries
Parts Name and Func tions
Buttons, Switc h, and Indic ator
2
1
Button Location
OFF
ON
10
9
8
7
6
5
4
3
1 Main Power Switc h
5 INPUT butto n
Switches the main power on/off.
Displays the OSD menu to switch the video input.
You can select [RGB1], [RGB2], [RGB3], [RGB4], [DVD/HD],
[VIDEO<S>], or [VIDEO] using the UP ( ) or DOWN ( ) button.
2 Remo te c o ntro l senso r and Power indic ato r
Remote control sensor: Receives the signal from the wireless
remote control.
Power indicator:
Indicates the state of the LCD monitor.
Steady green:
The power is on.
Steady red:
The power is off.
Some operations such as power-on
are possible.
Steady green and red: The LCD monitor is in the sleep
mode.
Off:
The main power is off.
Steady red and blinking green: The LCD monitor is in the
schedule standby mode.
Blinking red:
The LCD monitor has an error
(detected by the self-diagnostic
function).
3 POWER butto n (
)
Switches the power on/off.
This button doesn t work when the power indicator is off.
Turn on the main power. (See page 24.)
4 MUTE butto n
6 PLUS (+) butto n
Acts as (+) button to increase the adjustment in the OSD menu.
Increases the audio output level when the OSD menu is off.
7 MINUS (-) butto n
Acts as (-) button to decrease the adjustment in the OSD menu.
Decreases the audio output level when the OSD menu is off.
8 UP (
) butto n
Acts as button to move the highlighted area up to select an
adjustment item in the OSD menu.
9 DOWN (
) butto n
Acts as button to move the highlighted area down to select
an adjustment item in the OSD menu.
10 EXIT butto n
Activates the OSD menu when the OSD menu is off.
Acts as EXIT button to go back to the previous OSD menu.
(Referenc e) Co ntro l Lo c k mo de
You can lock the operation buttons. See page 42.
Switches the audio mute on/off.
NOTE:
For details about the OSD menu operation using the buttons, see Basic operation of OSD. (See page 33.)
English-8
Parts Name and Func tions (c o ntinued)
Connec tors and Terminals
4
c
OUT
R L
IN
b
1
8
a
2
3
5
10
OUT
H
IN
R B
Cr/Pr Cb/Pb
6
7
9
V
G
Y
11
1 AC IN (3-pin, with earth terminal)
6 RS-232C c o nnec to r (D-SUB 9-pin)
Connects with the supplied power cord.
IN connector:
Connects with the RS-232C OUT connector of a computer or
other connected LDT323V.
OUT connector:
Connects with the RS-232C IN connector of other connected
LDT323V.
2 EXTERNAL SPEAKER TERMINAL
Connects with the special stereo speakers (option).
3 AUDIO IN
Connects with the audio output connector of external
equipment such as a computer, VCR, and DVD player.
(a) AUDIO1: 3.5 stereo mini-jack connector
(b) AUDIO2: RCA connector
(c) AUDIO3: RCA connector
4 AUDIO OUT (RCA)
Outputs the signal that is supplied to the selected AUDIO IN
connector. Connects with an external audio ampli er, etc.
5 VIDEO INPUT/OUTPUT (BNC/S c o nnec to r)
Connects with video equipment.
S VIDEO IN: S-video input connector (MINI DIN 4-pin)
VIDEO IN: BNC connector
VIDEO OUT: BNC connector
7 RGB1 IN (HDMI)
Connects with the digital video output of a computer, DVD
player, etc.
8 RGB OUT (MINI D-SUB 15-pin)
Outputs the signal that is supplied to the RGB3 or RGB4 IN
connector.
9 RGB2 IN (DVI-D)
Connects with the digital video output of a computer, etc.
10 RGB3 IN (MINI D-SUB 15-pin)
Connects with the analog video output of a computer, etc.
11 RGB4 IN, DVD/ HD IN (BNC)
Connects with the analog video output of a computer or the
component video output of a DVD player, etc.
English-9
Parts Name and Func tions (c o ntinued)
Wireless Remote Control
8 AUDIO INPUT butto ns
1
Select the audio input from [AUDIO1], [AUDIO2], [AUDIO3], and
[HDMI]. However, note that [VIDEO<S>] and [VIDEO] use
common settings. You can select [HDMI] only when the video
input source is [RGB1].
2
9 PIP (Pic ture-in-Pic ture) butto ns
3
11
4
5
6
12
13
14
7
15
16
8
ON/OFF button:
INPUT button:
Switches the PIP or POP mode on/off.
Selects video to be displayed in the sub
picture.
CHANGE button: Changes the main picture with the sub
picture.
[Desc riptio n]
PIP: Picture-in-Picture
The sub picture is displayed within the main picture.
POP: Picture-out-Picture
The sub picture is displayed to the bottom right of the main
picture.
SIDE BY SIDE
The main picture and the sub picture are displayed side by
side.
17
18
9
10
NOTE:
When the screen size is [CUSTOM] or [REAL], the PIP and POP
modes don t work.
1 POWER butto n
Switches the power on/off.
* When the Power indicator is not glowing, no controls will
work.
10 STILL butto n
2 INPUT butto ns
ON/OFF button:
Switches the still picture mode on/off.
CAPTURE button: Captures the new picture.
Select the input signal from [RGB1] (HDMI), [RGB2] (DVI-D),
[RGB3] (D-SUB), [RGB4] (BNC), [DVD/HD] (YPbPr), [VIDEO<S>],
and [VIDEO].
Selects the picture size from [FULL], [NORMAL], [CUSTOM],
[DYNAMIC], and [REAL]. See page 42.
NOTE:
The [CAT5] and [DISPLAY PORT] buttons don t work.
11 SIZE butto n
12 MENU butto n
Switches the OSD menu mode on/off.
3 PICTURE MODE butto n
13 UP butto n (
Selects the picture mode from [HIGHBRIGHT], [STANDARD],
[sRGB], and [CINEMA]. See page 26.
HIGHBRIGHT: The brightness is maximized.
STANDARD:
Factory default setting.
sRGB:
Suitable for color matching with sRGBcompliant devices.
CINEMA:
Suitable for viewing movies.
)
Acts as button to move the highlighted area up to select
an adjustment item in the OSD menu. When the PIP mode is
active, this button moves the sub picture up.
14 PLUS butto n (+)
Acts as (+) button to increase the adjustment in the OSD menu.
When the PIP mode is active, this button moves the sub picture
to the right.
4 DISPLAY butto n
Displays the screen information. See page 42. When the remote
control mode is LOCK, you can set it back to NORMAL by
holding down the DISPLAY button for at least 5 seconds (see
page 39).
5 SET butto n
Accepts the settings made in the OSD menu.
15 EXIT butto n
Displays the previous OSD menu.
16 DOWN butto n (
)
Acts as button to move the highlighted area down to select
an adjustment item in the OSD menu. When the PIP mode is
active, this button moves the sub picture down.
6 MINUS butto n (-)
17 MUTE butto n
Acts as (-) button to decrease the adjustment in the OSD menu.
When the PIP mode is active, this button moves the sub picture
to the left.
Switches the mute function on/off.
7 AUTO SETUP butto n
18 VOLUME butto ns (VOL)
Pressing the plus (+) side increases the audio output level.
Pressing the minus (-) side decreases the audio output level.
Displays the auto setup menu. See pages 26 and 35.
English-10
Parts Name and Func tions (c o ntinued)
How to Use the Wireless Remote Control
Ope rating Rang e o f the Wire le s s Re mo te
Control
Ins talling the Wire le s s re mo te c o ntro l
batteries
Point the wireless remote control toward the LCD monitor s
remote control sensor during button operation.
Use the wireless remote control within a distance of about 7 m
from the front of the LCD monitor s remote control sensor and
at a horizontal and vertical angle of within 30 within a distance
of about 3.5 m.
The wireless remote control is powered by 1.5 V AAA batteries.
1. Unlock and pull up the cover in the arrow s direction.
2. Align the batteries according to the (+) and (-) indications
inside the case.
3. Replace the cover.
CAUTION:
Incorrect use of batteries can result in leaks or explosion.
Be careful especially about the following points.
Place AAA batteries matching the (+) and (-) signs on each
battery to the (+) and (-) signs of battery compartment.
Do not mix battery types.
Do not combine new batteries with used ones. It causes
shorter battery life or leakage of batteries.
Remove dead batteries immediately to prevent battery
liquid from leaking into the battery compartment. Don t
touch exposed battery acid because it causes damage to
your skin.
30 30
CAUTION:
The remote control system may not function when direct
sunlight or strong illumination strikes the remote control sensor
of the LCD monitor, or when there is an object in the path.
NOTE:
If you do not use the wireless remote control for a long period,
remove the batteries.
Handling the wireless remote c ontrol
*
*
*
*
Do not subject to strong shock.
Do not allow water or other liquid to splash on the wireless
remote control. If the wireless remote control gets wet, wipe
it dry immediately.
Avoid exposure to heat and steam.
Other than to install the batteries, do not open the wireless
remote control.
English-11
Preparation for use
Flow of preparation
P-1
Preparatio n fo r installation
- Determine the installation location
- Ventilation requirements for enclosure mounting
Page 13
Carry out as necessary
P-2
Installing the monito r
Pages 14 to 15
- Installing and removing the stands (The stands are optionally available.)
- Installing the main switch cover
- Using the wall mount or ceiling mount
- Installing in the portrait position
Carry out as necessary
P-3
Installing the speakers
P-4
Co nnec tion pro c edure
- Wiring diagram
- Prevention of disconnection of HDMI cable
- Connecting with a computer (analog connection)
- Connecting with a computer (digital connection)
- Connecting a video device (component video/HDMI device)
- Connecting a video device (composite video/S video device)/stereo ampli er
P-5
Co nnec ting the power c o rd to the mo nito r
- Connecting the power source
The monitor is ready for use.
How to Use
Page 23
English-12
Page 16
Pages 17 to 21
Page 22
P-1
Preparation fo r installation
Install the monito r o n a at, level, stable surfac e where the
sc reen is easy to view.
(For installation using the option stand.)
Determine the installation loc ation
CAUTION:
DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY
YOURSELF.
Installing your LCD monitor must be done by a quali ed
technician. Contact your dealer for more information.
This LCD has a temperature sensor and cooling fan. If the LCD
becomes hot, the cooling fan will turn on automatically. If the
LCD becomes overheated, the Caution menu will appear.
If the Caution menu appears, stop using the monitor and
allow it to cool. When the LCD monitor is used in an enclosure
or with protection on LCD surface, please check the inside
temperature of the monitor by HEAT STATUS (See page 40). If
the temperature is higher than the normal level, set COOLING
FAN to ON using the SCREEN SAVER function (See page 40).
To avo id the mo nito r from falling
When installing the monitor using the tabletop stands (optional),
take measures to prevent the monitor from falling over in case
of an earthquake or other disaster to lessen the probability of
injury and damage resulting from the fall.
As shown in the gure, secure the monitor to a solid wall or
pillar using rope (commercially available) strong enough to bear
the weight of the monitor. [LDT323V: approximately 14.5 kg (with
the optional stands)]
Use of screw hooks (with opening) is recommended.
360 mm
CAUTION:
MOVING OR INSTALLING THE LCD MONITOR MUST BE
DONE BY TWO OR MORE PEOPLE.
Failure to follow this caution may result in injury if the LCD
monitor falls.
Screw hook, etc.
commercially available
Screw holes
CAUTION:
Do not mount or operate the monitor upside down, face up, or
face down.
Rope, etc.
commercially
available
Screw
IMPORTANT:
Lay the protective sheet, which was wrapped around the LCD
monitor when it was packaged, beneath the LCD monitor so as
not to scratch the panel.
Ventilation requirements for enclosure mounting
To allow heat to disperse, leave space around the monitor as
shown in the gure below.
Clamper
CAUTION:
The effect of the fall prevention substantially depends
on the strength of brackets and base to which the fall
prevention devices is attached. When you cannot ensure
suf cient strength, provide adequate reinforcement.
Though the recommended fall prevention is intended to
lessen the probability of injury and damage, it doesn t
assure its effectiveness against any kind of earthquake or
disaster.
Do not sleep where the monitor may topple over or fall in
case of an earthquake or other disaster.
Before moving the monitor, remove the rope that is
securing the monitor. Failure to do so may result in injury or
breakdown of the monitor.
CAUTION:
The upper limit of the operation guaranteed temperature range
ensure adequate ventilation to keep the temperature inside
holes in the case.
English-13
P-2
Installing the monitor
Installing and removing the stands
The stands are available as option.
Refer to the user s manual of the stand for more information.
Carry o ut as nec essary
Using the wall mount or c eiling mount
Lay the sc reen fac e down
Lay the protective sheet on a table, which was wrapped around
the monitor when it was packaged, beneath the screen surface
so as not to scratch the screen surface.
This device cannot be used or installed without the Tabletop
Stand or other mounting accessory. Failure to follow the correct
mounting procedures can result in damage to the equipment or
injury to the user or installer. Product warranty does not cover
damage caused by improper installation.
Failure to follow these recommendations can void your
warranty.
Use M6 screws (having a length 10 mm longer than the
thickness of the mounting bracket) and tighten them securely.
Prevent the screws from loosening using spring washers, etc.
MITSUBISHI ELECTRIC recommends using mounting interface
that comply with T V-GS and/or UL1678 standard in North
America.
Screw x 4
(Accessories of
the option stand)
Option stand x 2
(Longer portion comes to the front.)
How to install the stands
1. Turn the monitor off.
2. Fasten screws on both sides of the monitor.
394.5
100
100
100
394.5
100
Protective
Sheet
NOTE:
Install the stands so that their longer portions come to the front.
How to remove the stands
1. Spread the protective sheet on a at surface, such as a
desk.
2. Place the monitor on the protective sheet.
3. Remove the screws with a screwdriver and place them in a
safe place for reuse.
Installing the main switc h c over
To prevent unauthorized operation of the main power switch,
attach the main switch cover, which is supplied as an
accessory.
NOTE:
With the main power switch cover in place, the main power
switch cannot be turned off. Remove the main power switch
cover in order to switch off the monitor.
Screw x 2
(Accessory)
(mm)
Table
Tabletop Stand
CAUTION:
For preventing the monitor from falling.
Install the monitor with metal brackets for wall or
ceiling installation (commercially available) on your own
responsibility. For detailed procedures of installation, refer
to the instructions of the metal brackets.
To lessen the probability of injury and damage resulting
from fall of the monitor in case of earthquake or other
disaster, be sure to consult the bracket manufacturer for
installation location.
To lessen the risk of falling of the monitor, thread
commercially available rope through the handles at the
right and left of the monitor and secure the rope to the wall
mount brackets or ceiling mount brackets.
Do not sleep where the monitor may topple over or fall in
case of an earthquake or other disaster.
Main switch cover
(Accessory)
English-14
P-2
Installing the mo nitor (c o ntinued)
Installing in the portrait position
Co nditio ns:
LDT323V can be installed in the portrait position, under the
following conditions:
CAUTION:
Portrait position is available only when the monitor is wallmounted or ceiling-mounted.
The stands (legs) can not be tted to the monitor in the portrait
position.
Placing the monitor in the portrait position will shorten the
average life of the LCD backlight.
Operation Environment (Temperature) shall be limited, as
shown below:
Operatio n Enviro nment:
Temperature 5 - 35 C / 41 - 95 F
Humidity
20 - 80% (without condensation)
Place the monitor in the position shown below.
Do not place the monitor in landscape in any other manner than
shown.
Optional speakers can not be attached when the LCD monitor
is installed in the portrait position.
How to set-up
logo should be on the LEFT side when
The
viewed from the front of the monitor.
Landsc ape
90
Clockwise
logo
English-15
Carry o ut as nec essary
P-3
Installing the speakers
Carry o ut as nec essary
Before c o nnec ting the signal c able to PC and Video
Optional speakers can be installed.
Please refer to user s guide of the optional speakers for the detailed installation procedure.
How to install the o ptio nal speakers
1. Use the metal ttings and screws that are supplied with the option speakers.
2. Connect the cord of the left speaker to the SPEAKER (S) terminal (L) on the monitor, and the cord of the right speaker to the
SPEAKER (S) terminal (R).
Left speaker
Right speaker
SPEAKER (S)(L)
SPEAKER (S)(R)
Red(+)/Black(-)
Red(+)/Blac k(-)
To speaker terminal (L)
To speaker terminal (R)
NOTE:
The speaker cord has polarity (+ and -). Match the colors of the speaker terminal and the connector of the cord.
CAUTION:
Do not move the monitor with the speakers installed.
The monitor and the speakers may be damaged and you may be injured if the monitor falls.
English-16
P-4
Connec tion pro c edure
Befo re making c o nnec tions
First turn off the power of all the connected equipment before making connections.
Refer to the user manual of each piece of equipment.
NOTE:
Please use the audio cable without resistance when the audio output terminal of the audio device and PC is stereo mini-Jack.
When the audio cable with resistance is used, the audio level may not be increased or no audio may be output.
Wiring diagram
LCD monitor (rear)
Computer
(DVI-D, HDMI)
LCD monitor ( rst monitor)
G
B
VIDEO IN
R
DVI IN
V
S-VIDEO
IN2
IN1
OUT
HDMI
RS-232C IN
IN3
H
L
D-SUB OUT
D-SUB IN
RS-232C OUT
R
VIDEO OUT
Stereo ampli er
DVD player (HDMI, BNC)
Computer
(Analog RGB)
LCD monitor (second monitor)
HD disk player (HDMI)
External speakers
VCR (RCA)
Prevention of disc onnec tion of HDMI c able
The HDMI cable must be secured by the clamper to prevent it from being disconnected accidentally.
Clamper
(Accessory)
Cable Holder (Accessory)
English-17
P-4
Connec tio n proc edure (c o ntinued)
Connec ting with a c omputer (analog c onnec tion)
Analog c onnec tio n:
Co nnec tio n via RGB3 IN (D-SUB) c o nnec tor
(1) Connect an RGB cable (mini D-SUB 15-pin mini D-SUB 15-pin) (accessory) to the RGB3 IN connector.
(2) Select [RGB3] using the INPUT button on the monitor or the D-SUB button on the wireless remote control.
Co nnec tio n via RGB4 IN (BNC: R G B H V, or R G B Csync , RGB sync o n green) c onnec to r
(1) Use a BNC cable (BNC x 5 - BNC x 5) (commercially available) to connect the BNC connector on the PC, and use a signal
cable (mini D-SUB 15-pin - BNC x 5) (commercially available) to connect the mini D-SUB 15-pin connector on the PC.
(2) Select [RGB4] using the INPUT button on the monitor or the BNC button on the wireless remote control.
Sec o nd mo nitor c onnec tion:
Connect the RGB OUT connector (mini D-SUB 15-pin) on the rst monitor and the RGB3 IN connector (mini D-SUB 15-pin)
on the second monitor using an RGB cable (mini D-SUB 15-pin - mini D-SUB 15-pin) (an accessory of the second monitor or
commercially available).
(The RGB3 or RGB4 signal selected by the rst monitor is output. The RGB1 or RGB2 signal isn t output.)
NOTE:
When different monitors need to be adjusted so that their tint can be identical, such as when using multiple screens, it is
recommended to use a signal distributor (commercially available).
Audio c o nnec tion:
Connect an audio cable ( 3.5 mm stereo mini) (commercially available) to the AUDIO IN1 connector.
Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control.
To output audio to the second monitor:
Connect the AUDIO OUT connector on the rst monitor and the AUDIO IN2 or 3 connector on the second monitor using an RCA
cable (audio) (commercially available).
LCD monitor (rear)
Computer
Computer
(Analog RGB)
(Analog RGB)
To BNC output
RGB c able
(Mini D-SUB 15-pin to
Mini D-SUB 15-pin)
To D-SUB output
To audio output
Audio c able
( 3.5 mm stereo mini)
LCD monitor ( rst monitor)
RGB3 IN (D-SUB)
AUDIO IN2 (RCA)
RGB c able
(Mini D-SUB 15-pin to
Mini D-SUB 15-pin)
RCA c able (audio)
LCD monitor (second monitor)
(Multi-connection)
English-18
P-4
Connec tio n proc edure (c o ntinued)
The monitor automatically distinguishes the timings shown in the table below and sets the screen information. When a PC or other
device is connected, it automatically displays images properly.
<Fac to ry preset timing>
Resolution
1
2
3
4
5
640 x 480
800 x 600
1024 x 768
1280 x 768
1360 x 768
Frequency
Horizontal Vertical
31.5 kHz
60 Hz
37.9 kHz
60 Hz
48.4 kHz
60 Hz
47.8 kHz
60 Hz
47.7 kHz
60 Hz
Remarks
Resolution
6
7
8
9
1280 x 1024
1600 x 1200
1920 x 1080
1920 x 1200
Frequency
Horizontal Vertical
64.0 kHz
60 Hz
75.0 kHz
60 Hz
67.5 kHz
60 Hz
74.0 kHz
60 Hz
Remarks
CVT Reduced Blanking
Recommend timing
NOTE:
When a signal other than 1
x
is input, characters may be blurred and gures and objects may be distorted.
Images may not be displayed correctly depending on the video card or driver being used.
Connec ting with a c omputer (digital c onnec tion)
Digital c o nnec tio n:
Co nnec tio n via the RGB1 IN c onnec to r (HDMI)
(1) Connect an HDMI cable (commercially available) to the RGB1 IN connector.
(2) Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control.
Co nnec tio n via the RGB2 IN c o nnec to r (DVI-D)
(1) Connect a DVI-D cable (commercially available) to the RGB2 IN connector.
(2) Select [RGB2] using the INPUT button on the monitor or the DVI-D button on the wireless remote control.
Audio c o nnec tion:
Co nnec t an audio c able ( 3.5 mm stereo mini) (c o mmerc ially available) to the AUDIO IN1 c o nnec to r.
Select [AUDIO1] using the AUDIO INPUT buttons on the wireless remote control.
When an HDMI cable is connected, select HDMI audio.
(You can select HDMI only when the video input is [RGB1].)
Computer
(DVI-D, HDMI)
LCD monitor (rear)
To DVI-D output
DVI-D c able
HDMI cable
To HDMI output
To Audio output
Audio c able
( 3.5 mm stereo mini)
LCD monitor
English-19
P-4
Connec tio n proc edure (c o ntinued)
Connec ting a video devic e (c omponent video/HDMI devic e)
This monitor can be connected to a video device equipped with component output such as a DVD player.
Refer to the user s manual of the connected device for details. (Cables shown in the gure below are commercially available.)
To connect a DVD player equipped with component output to the DVD/HD IN connector (YPbPr or YCbCr) on the monitor, use a
BNC cable (BNC x 3 BNC x 3) and a BNC-RCA adaptor (commercially available), or a signal cable (BNC x 3 D connector).
Select [DVD/HD] using the INPUT button on the monitor or the YPbPr button on the wireless remote control.
To make audio connection, connect an RCA cable (audio) to the AUDIO IN2 connector or the AUDIO IN3 connector.
Select [AUDIO2] or [AUDIO3] using the AUDIO INPUT buttons on the wireless remote control.
To connect a DVD player equipped with HDMI output to the RGB1 IN connector (HDMI) on the monitor, use an HDMI signal
cable.
Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control.
For HDMI cable connection, select HDMI audio.
(You can select HDMI audio only when the video input is [RGB1].)
Signal cable
(BNC x 3 to D c onnec tor)
To D connector output
BNC c able
(BNC x 3 to BNC x 3)
To video output
LCD monitor (rear)
DVD player
(component device)
BNC-RCA adaptor
RCA c able (audio)
DVD/HD IN
(Y Pb Pr, Y Cb Cr)
G
B
VIDEO IN
R
DVIIN
V
AUDIO IN2 (RCA)
IN2
IN1
OUT
RS-232C IN
IN3
L
D-SUB OUT
D-SUB IN
DVD player
(HDMI device)
S-VIDEO
HDMI
H
RS-232C OUT
VIDEO OUT
RGB1 IN (HDMI)
HDMI cable
To HDMI output
English-20
R
To Audio output
P-4
Connec tio n proc edure (c o ntinued)
Connec ting a video devic e (c omposite video/S video devic e)/stereo ampli er
This monitor can be connected to a stereo ampli er.
Refer to the user s manual of the stereo ampli er for details. (Cables shown in the gure below are commercially available.)
To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable or an S video
cable. For connection to the audio input connector on the monitor, use an RCA cable (audio cable). Connect the connectors
of the RCA cable (audio) correctly. For connection to the VIDEO IN connector, select [VIDEO] using the INPUT button on the
monitor or the VIDEO button on the wireless remote control. For connection to the S-VIDEO IN connector, select [VIDEO<S>]
using the INPUT button on the monitor or the VIDEO(S) button on the wireless remote control.
To connect two monitors, connect one end of a BNC cable to the VIDEO OUT connector of the rst monitor and the other end to
the VIDEO IN connector of the second monitor.
NOTE:
When different monitors need to be adjusted so that their tint can be identical, such as when using multiple screens, it is
recommended to use a signal distributor (commercially available).
When connecting a stereo ampli er to the monitor, be sure to turn off the power of the stereo ampli er. For connection to the
audio output connector on the monitor, use an RCA cable (audio). Connect the connectors of the RCA cable (audio) correctly. Be
sure to turn on the monitor rst, and then turn on the stereo ampli er.
The selected audio input signal is output from the AUDIO OUT connector.
LCD monitor (rear)
RCA c able (audio)
S video c able
S-VIDEO IN
AUDIO IN2
LCD monitor ( rst monitor)
G
B
VIDEO IN
R
DVIIN
V
S-VIDEO
IN2
IN1
OUT
HDMI
RS-232C IN
IN3
H
L
D-SUB OUT
D-SUB IN
RS-232C OUT
VIDEO IN
R
VIDEO OUT
AUDIO OUT
BNC c able
VIDEO OUT
Video device
(composite video/S video device)
Stereo ampli er
VIDEO IN
External speaker
LCD monitor (second monitor)
English-21
External speaker
P-5
Connec ting the power c ord to the monitor
Connec ting the power sourc e
The power outlet socket should be installed as near the equipment as possible and should be easily accessible.
Fully insert the prongs into the power outlet socket.
Loose connection may cause noise.
NOTE:
Please refer to Safety Precautions, Maintenance & Recommended Use in this manual for proper selection of the AC power cord.
Clamper (Accessory)
Cable holder
(Accessory)
Power cord
English-22
Use the clamper to secure the
cable rmly.
How to Use
Flow of How to Using
U-1
Turning o n all the c onnec ted devic es
Page 24
U-2
Selec ting the video input
Page 25
U-3
Co ntro lling the external devic es
Page 26
RGB3 and RGB4 only
U- 4
Auto -setup
Page 26
U-5
Selec ting the pic ture mo de
Page 26
U- 6
Sc reen adjustment
Page 27
U-7
Pic ture adjustment
Page 27
Carry out as necessary
U- 8
Vo lume c ontro l
U-9
Sc hedule setting
Pages 28 to 29
U-10
Remote c ontro l
Pages 30 to 31
Page 28
English-23
U-1
Turning on all the c onnec ted devic es
Turning on external devic es
Power Indic ato r
1. Turn on the c onnec ted devic es suc h as
the c omputer and VCR.
Turning on the monitor
2. Turn on the Main Power Switc h.
Status
Power ON
Power OFF
Power Standby when
SCHEDULE is enable
Sleep mode
Diagnosis (Detecting failure)
LED
Green
Red
Red On
Green Blinking
Red, Green
Red Blinking
* See troubleshooting on page 44.
The power indicator turns on green.
The control buttons on the bottom of the monitor and the
wireless remote control don t work while the Main Power
Switch is off (the power indicator is off).
When using them, check that the Main Power Switch is on
(the power indicator is on).
3. When the power indic ator glows
red, press the POWER button on the
monitor.
Main Power Switch
The power indicator turns green.
Power Management Func tion
This function reduces the power consumption of the monitor
when the keyboard or the mouse is not used for a xed period
even though the power of the monitor is on.
While this function is working, the screen becomes dark and
the power indicator glows green and red.
This function is available only when a computer equipped
with the VESA-approved DPM Power Management function is
connected to the monitor.
When the power saver in the OSD menu is turned ON, the
power management function works.
RGB:
When the sync signal of computer input (RGB1, 2, 3, or
4) is terminated, the monitor will be in the sleep mode
in several seconds.
VIDEO: When the sync signal of video input (DVD/HD,
VIDEO<S>, or VIDEO) is terminated, the monitor will be
in the sleep mode in approximately 10 minutes.
or
Power button
[Desc riptio n]
DPM: Acronym for Display Power Management
NOTE:
The default power management settings (power savers) for
RGB and VIDEO are ON.
Power button
Wireless remote
control
English-24
U-2 Selec ting the video input
You can select the desired video input using the wireless remote control or the INPUT button on the monitor.
1. Selec t using the INPUT buttons on the wireless remote c ontrol.
You can select the desired video input by pressing the corresponding INPUT button on the wireless remote control.
Selectable video inputs are [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [DVD/HD] (YPbPr), [VIDEO<S>], and
[VIDEO].
NOTE:
The [CAT5] and [DISPLAY PORT] buttons don t work.
2. Selec t using the INPUT button on the monitor.
When you press the INPUT button on the monitor, the video input OSD menu is displayed and you can select the video input
using the and buttons.
Selectable video inputs are [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [DVD/HD] (YPbPr), [VIDEO-S], and
[VIDEO].
NOTE:
The selection you make doesn t complete unless you press the INPUT button while the OSD information is displayed. See page 39.
RGB1
RGB2
RGB3
RGB4
DVD/HD
VIDEO-S
VIDEO
INPUT button
Video input OSD menu
Select using the
English-25
and
buttons.
U-3 Controlling the external devic es
You can control the externally connected devices to display images supplied from them.
VCR, etc.
Personal computer
U-4 Auto -setup
Analog inputs o nly
The AUTO SETUP button on the wireless remote control or AUTO SETUP in the OSD menu automatically adjusts the screen size,
horizontal/vertical position, clock, clock phase, white level, and black level.
NOTE:
The auto setup works on RGB3 and RGB4 only.
U-5 Selec ting the pic ture mode
Using the PICTURE MODE button on the wireless remote control, you can select the picture mode suitable for images to be
displayed.
HIGHBRIGHT:
STANDARD:
sRGB:
CINEMA:
The brightness is maximized.
Factory default setting.
Suitable for color matching with sRGB-compliant devices.
Suitable for viewing movies.
English-26
U-6 Sc reen adjustment
When images aren t displayed properly even after the auto setup, you can alternatively adjust the screen by pressing the MENU
button on the wireless remote control or the control buttons on the bottom of the monitor to display the OSD menu. Using the
SCREEN settings in the OSD menu, you can adjust the horizontal/vertical position, clock, clock phase, CUSTOM ZOOM, horizontal
resolution, vertical resolution, and input resolution.
NOTE:
The position adjustment works on RGB3, RGB4, DVD/HD, VIDEO<S>, and VIDEO only.
The clock adjustment and the resolution adjustment work on RGB3 and RGB4 only.
The zoom adjustment works on all video inputs.
U-7
Pic ture adjustment
You can adjust the picture by pressing the MENU button on the wireless remote control or the control buttons on the bottom of
the monitor to display the OSD menu. Using the PICTURE settings in the OSD menu, you can adjust picture settings such as the
brightness, contrast, and sharpness.
English-27
U-8 Volume c ontro l
Carry o ut as nec essary
When outputting audio from the option stereo speakers, you can control the volume level using the VOL button on the wireless
remote control.
In addition, you can adjust the volume by pressing the MENU button on the wireless remote control or the control buttons on the
bottom of the monitor to display the OSD menu. Using the AUDIO settings in the OSD menu, you can adjust the balance, treble, and
bass.
or
Volume
control
Displaying
the OSD
menu
U-9 Sc hedule setting
Carry o ut as nec essary
You can program the power-on/off and input selection using the SCHEDULE setting in the OSD menu that is displayed by pressing
the MENU button on the wireless remote control or the control buttons on the bottom of the monitor.
English-28
U-9 Sc hedule setting (c ontinued)
Carry o ut as nec essary
Check box
Radio button
When the cursor is on any of the check boxes showing the program numbers 1 to 7 on the left side of the screen, pressing the UP
( ) or DOWN ( ) button moves the cursor vertically and pressing the PLUS (+) or MINUS (-) buttons moves it horizontally.
By pressing the SET button, you can select or deselect the check boxes.
Check box:
When the check box is selected, the program is enabled. When it is cleared, the program is disabled.
When the SCHEDULE screen is closed, the programs you made become enabled and will be executed at the
speci ed times.
When the cursor is on any item of the schedule settings in the white frame, pressing the PLUS (+) button moves it to the right and
pressing the MINUS (-) button moves it to the left.
You can set the power-on/off time and video input by pressing the UP ( ) or DOWN ( ) button. You can select or deselect the
radio buttons by pressing the SET button.
ON:
Set the time when the power is turned on. If you don t want to set the power-on time, enter --.
OFF:
Set the time when the power is turned off. If you don t want to set to the power-off time, enter --.
INPUT:
Set the video input to be selected when the power is turned on. If you want to select the vide input that was
selected before the power is turned on, enter --.
EVERY DAY:
Select this option to execute the schedule every day. When you select EVERY DAY, you cannot select any days
of the week and EVERY WEEK.
MON - SUN:
Select the days of the week on which you want to execute the schedule. Unless you select EVERY WEEK, too,
the selection of the days of the week is cleared after the schedule is executed one time.
EVERY WEEK: Select this option to execute the schedule on the selected days of the week, every week.
NOTE:
Before making the schedule settings, be sure to check the current date and time using DATE AND TIME.
When you close the SCHEDULE screen, the settings are saved.
When two or more schedules are enabled, they are executed in descending order of the program number, and the power is
turned off upon completion of the last executed schedule.
When there are two or more schedules having the same power-on/off time, the one having the largest program number is
executed.
You cannot set the power-on time and the power-off time to the same time.
When OFF TIMER is ON, the schedule settings are ignored.
English-29
U-10 Remote c ontrol
Carry o ut as nec essary
RS-232C Remote c ontrol
By connecting multiple LCD monitors and a computer using RS-232C cables (commercially available), you can control the monitors
from the computer for the following operations:
Power ON or OFF
Switching between input signals
Volume control and mute
Auto setup
Check of the internal temperature of the monitor, etc.
Co nnec tio n
LCD monitor ( rst monitor)
To RS-232C
connec tor IN
PC
LCD monitor (second monitor)
To RS-232C
connec tor IN
To RS-232C
connector OUT
RS-232C cable
RS-232C cable
(commercially available)
(commercially available)
Before making connections, turn off the personal computer and the monitors.
NOTE:
For connection with a 25-pin serial port connector on the computer, a conversion adapter (commercially available) is required.
1) Interface
PROTOCOL
RS-232C
BAUD RATE
9600 [bps]
DATA LENGTH
8 [bit]
PARITY BIT
NONE
STOP BIT
1 [bit]
FLOW CONTROL
NONE
This LCD monitor uses RXD, TXD and GND lines for RS-232C control.
Use RS-232C cables of reverse type (commercially available).
2) Control command diagram
The command is structured by the address code, function code, data code and end code. The length of the command is
different for each function.
NOTE:
This example shows a basic command that is used when a single computer and a single monitor are connected.
When you want to connect multiple monitors or perform complicated control using other commands than the basic
commands, contact your dealer for advanced command speci cations.
To use terminal software, send a text le with control commands. The monitor is not compatible with the sending of
commands using a keypad.
Address code
Function code
Data code
End code
HEX
30h 30h
Function
Data
0Dh
ASCII
0 0
Function
Data
[Address code]
[Function code]
[Data code]
[End code]
30h 30h (ASCII code, 0 0 ), xed.
Code unique to each control function.
Data unique to each control function (Not always indicated by numerical values.)
) xed.
0Dh (In ASCII code,
English-30
U-10 Remote c ontrol (c ontinued)
Carry o ut as nec essary
3) Control sequence
(1) A command is sent from the computer to the monitor. (Commands should be sent at intervals of at least 600 ms.)
(2) The monitor sends a return command within 600 ms* after receiving and encoding the command. If the monitor fails to
receive the command, it doesn t send any return command.
(3) The computer checks the return command to see that the command it sent was executed or not.
(4) The monitor sends various codes other than the return code. While RS-232C control sequence is in progress, reject other
codes on the personal computer side.
*: Transmission of the return command may be delayed during signal switchover, etc.
Example: Turn the power ON ( is for ASCII code)
Command from computer Command from monitor
30 30 21 0D
0 0 !
30 30 21 0D
0 0 !
Detail of command
Command for POWER ON
Command received
(Command echoed back)
4) Operation commands
The operation commands con gure the basic operation settings of this LCD monitor. The commands may not work during signal
switchover.
The operation commands have no data codes.
Operation
ASCII
POWER ON
POWER OFF
!
"
INPUT RGB 1
INPUT RGB 2
HEX
Operation
ASCII
HEX
21h
22h
INPUT DVD/HD
INPUT S-VIDEO
_v2
_v3
5Fh 76h 32h
5Fh 76h 33h
_r1
_r2
5Fh 72h 31h
5Fh 72h 32h
VOLUME UP
VOLUME DOWN
r06
r07
72h 30h 36h
72h 30h 37h
INPUT RGB 3
_r3
5Fh 72h 33h
MUTE
ra6
72h 61h 36h
INPUT RGB 4
INPUT VIDEO
_r4
_v1
5Fh 72h 34h
5Fh 76h 31h
AUTO SETUP
r09
72h 30h 39h
When you send the POWER ON or POWER OFF command, send the next command at intervals of at least seven seconds.
When you send each INPUT switch command, send the next command at intervals of at least ve seconds.
In the power off mode or the sleep mode, only the POWER ON, POWER OFF, and POWER ON read command which is
described on the next page can be operated.
5) Read command
The computer sends the command without datacode to the monitor.
After receiving this command, the monitor returns the command with datacode including the current status to the computer.
Example: When the computer asks the power status of the monitor, and the status of the monitor is powered-on.
Command from computer
30 30 76 50 0D 0 0 v P [enter]
Command from monitor
30 30 76 50 31 0D 0 0 v P 1 [enter]
Detail of command
Ask about the power status of the monitor.
Monitor is powered-on.
Structure of the Read-command
Function
POWER
Input
Internal
temperature
ON
OFF (Sleep)
RGB-1 (HDMI)
RGB-2 (DVI-D)
RGB-3 (D-SUB)
RGB-4 (BNC)
Video
DVD/HD
S-VIDEO
Around the main Resolution
board
Around the power Resolution
supply
vP
vP
vI
vI
vI
vI
vI
vI
vI
ASCII
Data (Receive)
1
0
r1
r2
r3
r4
v1
v2
v3
Function
76 50
76 50
76 49
76 49
76 49
76 49
76 49
76 49
76 49
HEX
Data (Receive)
31
30
72 31
72 32
72 33
72 34
76 31
76 32
76 33
tc1
(ex.) +25
74 63 31
2B 20 32 35
tc2
(ex.) +31
74 63 32
2B 20 33 31
English-31
Con guration and basic operation of OSD sc reen
Con guration of OSD sc reen
This monitor is equipped with the OSD (On Screen Display) function for easy screen adjustment. The OSD function allows you to
control the menus displayed on the screen for brightness setting and other settings.
The OSD screen is con gured as shown below.
Main Menu Sc reen
Sub menu (Adjustment items)
Adjustment items are displayed.
Adjustment status
The values adjusted by the wireless remote control and the
PLUS and MINUS buttons on the monitor are displayed.
Operatio n butto ns (Key guide)
Buttons for controlling the displayed OSD menu are displayed.
Main menu
Icons other than the one you selected are grayed out.
PICTURE
Page 34
CONFIGURATION1
Page 38
SCREEN
Page 35
CONFIGURATION2
Page 39
AUDIO
Page 36
CONFIGURATION3
Page 40
PIP
Page 37
ADVANCED OPTION
Page 41
Sub menu sc reen
When you select a sub menu, an OSD screen is displayed.
Sub menus contain information screens, adjustment menu screens, and selection menu screens as shown below.
Sub menu screen: Picture reset (for example)
English-32
Co n guration and basic operation of OSD sc reen (c ontinued)
Basic operation of OSD
When the MENU button on the wireless remote control or the EXIT button on the monitor is pressed, the OSD screen is displayed.
Select a main menu by pressing the or button.
Wireless remote control
Monitor button
OSD screen
INPUT button
Accept the selected main menu
by pressing the SET button.
Accept the selected main menu
by pressing the INPUT button.
button
Select a sub menu by pressing
the
or button.
Select a sub menu by pressing
the
or button.
INPUT button
Ac cept the selec ted sub menu
by pressing the SET button.
Ac cept the selec ted sub menu
by pressing the INPUT button.
INPUT button
button
Select the setting value by
or button
pressing the
and then press the SET button
to accept the setting.
Select the setting value by
pressing the
or button and
then press the INPUT button to
accept the setting.
The OSD screen disappears when you press the MENU button on the wireless remote control once or the EXIT button on the
monitor three times.
English-33
OSD sc reen func tions
BRIGHTNESS
COLOR
You can adjust the brightness.
Press the PLUS (+) button to increase the brightness. Press
the MINUS (-) button to decrease the brightness.
* For the RGB1, DVD/HD, VIDEO<S>, and VIDEO inputs
only.
When you select COLOR by pressing the SET button on the
wireless remote control, the COLOR screen appears and
you can adjust the following.
[COLOR]:
You can adjust all the colors at the same time. Press the
PLUS (+) button to deepen the colors. Press the MINUS (-)
button to lighten the colors.
[RED], [MAGENTA], [BLUE], [CYAN], [GREEN], or [YELLOW]:
You can adjust each color individually. Press the PLUS (+)
button to deepen the selected color. Press the MINUS (-)
button to lighten the selected color.
NOTE : This adjustment doesn t work in the sRGB picture
mode.
CONTRAST
You can adjust the contrast.
Adjust the contrast using the PLUS (+) or MINUS (-) button
to obtain a desired result.
NOTE : Brightness changes luminance of the backlight.
Contrast changes signal levels, and therefore it is
likely to lead to whiteness.
SHARPNESS
You can adjust the sharpness.
Press the PLUS (+) button to make the image look sharper.
Press the MINUS (-) button to make the image look softer.
NOTE : If you increase the sharpness setting value too
much, lines may appear double. In such a case,
decrease the sharpness setting value.
BLACK LEVEL
You can adjust the brightness in the dark area of the image.
Press the PLUS (+) button to brighten dark areas in the
image. Press the MINUS (-) button to darken bright areas in
the image.
NOTE : This adjustment doesn t work in the sRGB picture
mode.
TINT
* For the RGB1, DVD/HD, VIDEO<S>, and VIDEO inputs
only.
When you select TINT by pressing the SET button on the
wireless remote control, the TINT screen appears and you
can adjust the following.
[TINT]:
You can adjust all the colors at the same time. Press the
PLUS (+) button to add a green tint. Press the MINUS (-)
button to add a purple tint.
[RED], [MAGENTA], [BLUE], [CYAN], [GREEN], or [YELLOW]:
You can adjust each color individually. Press the PLUS (+)
button to shift the selected color to the right around the
color circle. Press the MINUS (-) button to shift the selected
color to the left around the color circle.
RED
MAGENTA
YELLOW
NOISE REDUCTION
* For the RGB1, DVD/HD, VIDEO<S>, and VIDEO inputs
only.
You can adjust the noise reduction level.
Press the PLUS (+) button to increase the value to lessen
the noise.
FILM MODE
You can select the lm mode function.
AUTO: Images of 24 frames per second are detected,
subjected to interpolation, and then displayed.
OFF: The input video signals are displayed without being
subjected to any processing.
NOTE : When FILM MODE is AUTO, set SCAN
CONVERSION to PROGRESSIVE. See page 41.
PICTURE RESET
CYAN
Co lo r c irc le
GAMMA SELECTION
You can select the gamma mode from NATIVE, S GAMMA,
2.2, 2.4 and OPTION.
NOTE : GAMMA is xed to 2.2 in the sRGB picture mode.
You can reset all the PICTURE settings to the factory
defaults.
BLUE
GREEN
COLOR TEMPERATURE
You can adjust the color temperature.
The image becomes reddish as the color temperature
decreases, and it becomes bluish as the color temperature
increases.
NOTE : This adjustment doesn t work in the sRGB picture
mode.
English-34
OSD sc reen func tions (c ontinued)
SCREEN
REAL:
The image is displayed without being stretched
or reduced.
NOTE : In the DYNAMIC mode, the top and the bottom of
the image may be cropped. Full HD images are
displayed as in the FULL mode.
AUTO SETUP
* For the RGB3 and RGB4 inputs only.
Press the SET button to automatically adjust the screen
size, horizontal position, vertical position, clock, clock
phase, white level, and black level.
CUSTOM ZOOM
AUTO ADJUST
* For the RGB3 and RGB4 inputs only.
When AUTO ADJUST is ON, the horizontal position, vertical
position, and clock phase are automatically adjusted at the
time of the timing switching.
H POSITION
You can adjust the horizontal image position.
Press the PLUS (+) button to move the image to the right.
Press the MINUS (-) button to move the image to the left.
V POSITION
You can adjust the vertical image position.
Press the PLUS (+) button to move the image up. Press the
MINUS (-) button to move the image down.
CLOCK
* For the RGB3 and RGB4 inputs only.
You can adjust the image size of the computer and eliminate
blurred letters.
Press the PLUS (+) button to expand the width of the image
on the screen to the right. Press the MINUS (-) button to
narrow the width of the image on the screen to the left.
CLOCK PHASE
* For the RGB3 and RGB4 inputs only.
You can adjust the level of the periodic variation of the
screen icker.
ZOOM MODE
You can select the mode to stretch the image to t it to the
screen.
For the RGB1, RGB2, RGB3, and RGB4 inputs, you can
select FULL, NORMAL, CUSTOM, or REAL.
For DVD/HD, VIDEO<S>, and VIDEO, you can select FULL,
NORMAL, DYNAMIC, CUSTOM, or REAL.
FULL:
The image is stretched to ll the screen
regardless of its aspect ratio.
NORMAL: The image is stretched vertically to the full
height of the screen while keeping the aspect
ratio.
DYNAMIC: The image is stretched to ll the screen with
different magni cations at the screen center
and the screen edges.
CUSTOM: You can stretch the image horizontally and
vertically as you desire using the CUSTOM
ZOOM setting.
English-35
CUSTOM ZOOM becomes selectable when you set ZOOM
MODE to CUSTOM.
ZOOM:
You can expand the horizontal and vertical
sizes simultaneously.
H ZOOM:
You can expand the horizontal size only.
V ZOOM:
You can expand the vertical size only.
H POSITION: Pressing the PLUS (+) button moves the
image to the right. Pressing the MINUS (-)
button moves the image to the left.
V POSITION: Pressing the PLUS (+) button moves the
image up. Pressing the MINUS (-) button
moves the image down.
H RESOLUTION
* For the RGB3 and RGB4 inputs only.
Use this setting when AUTO SETUP and AUTO ADJUST
cannot obtain the horizontal resolution of the image
supplied from an external device.
Press the PLUS (+) button to increase the resolution. Press
the MINUS (-) button to decrease the resolution.
V RESOLUTION
* For the RGB3 and RGB4 inputs only.
Use this setting when AUTO SETUP and AUTO ADJUST
cannot obtain the vertical resolution of the image supplied
from an external device.
Press the PLUS (+) button to increase the resolution. Press
the MINUS (-) button to decrease the resolution.
INPUT RESOLUTION
* For the RGB3 and RGB4 inputs only.
You can select the following resolutions according to
the input signal: AUTO, 1024x768, 1280x768, 1360x768,
1400x1050, 1680x1050, 1600x1200, and 1920x1200. AUTO
selects the resolution automatically.
The setting you select becomes effective when POWER is
turned OFF and ON again.
SCREEN RESET
You can reset all the SCREEN settings to the factory
defaults.
OSD sc reen func tions (c ontinued)
AUDIO
BALANCE
You can adjust the balance of the right and left volumes.
Press the PLUS (+) button to decrease the left volume.
Press the MINUS (-) button to decrease the right volume.
TREBLE
You can adjust the high frequency sound.
Press the PLUS (+) button to increase the treble sound.
Press the MINUS (-) button to decrease the treble sound.
BASS
You can adjust the low frequency sound.
Press the PLUS (+) button to increase the bass sound.
Press the MINUS (-) button to decrease the bass sound.
AUDIO RESET
You can reset all the AUDIO settings to the factory defaults.
English-36
OSD sc reen func tions (c ontinued)
PIP (PICTURE IN PICTURE)
NOTE:
The PIP and POP functions don t work in the CUSTOM and
REAL picture size modes.
Refer to PIP, POP function for details. (See page 43.)
PIP MODE
PIP RESET
You can select the PIP mode from PIP, POP, SBS ASPECT,
SBS FULL, and OFF using the PLUS (+) and MINUS (-)
buttons. See page 43.
You can reset all the PIP settings to the factory defaults.
PIP
POP
SBS ASPECT
SBS FULL
OFF
* SBS: SIDE BY SIDE
PIP SIZE
You can select the size of the sub picture displayed in the
PIP mode.
You can move the sub picture by pressing the UP ( ),
DOWN ( ), PLUS (+), and MINUS (-) buttons.
PIP AUDIO
You can select the audio output in the PIP mode.
When MAIN is selected, audio of the main picture is output.
When SUB is selected, audio of the sub picture is output.
PIP H POSITION
You can adjust the horizontal position of the sub screen.
Press the PLUS (+) button to move the sub screen to the
right. Press the MINUS (-) button to move the sub screen to
the left.
PIP V POSITION
You can adjust the vertical position of the sub screen.
Press the PLUS (+) button to move the sub screen up. Press
the MINUS (-) button to move the sub screen down.
SUB INPUT
You can select the video input for the sub screen from
HDMI (RGB1), DVI-D (RGB2), D-SUB (RGB3), RGB4, DVD/
HD, VIDEO<S>, and VIDEO.
English-37
OSD sc reen func tions (c ontinued)
CONFIGURATION1
OFF TIMER
CONFIGURATION1 RESET
You can select the OFF TIMER mode.
Select the time period to automatically turn off the power
from 1 to 24 hours.
NOTE : When OFF TIMER is enabled, the SCHEDULE
settings (see page 28) will be disabled.
You can reset all the CONFIGURATION1 settings to the
factory defaults.
Note that you cannot reset the setting of DATE AND TIME.
SCHEDULE
You can program the LCD monitor operation schedules. (See
page 29.)
< HOW TO SETUP SCHEDULE >
Using the SCHEDULE function allows you to set up to
seven different scheduled time intervals when the LCD
Monitor will be activated.
You can select the time the monitor turns on and turns off,
the day of week the monitor is activated, and which input
source the monitor will use for each scheduled activation
period. A check mark in the box next to the number of the
schedule indicates that the selected schedule is in effect.
To select which schedule to set, use the up/down arrows to
move the number (1 to 7) of the schedule.
Use the (+) and (-) buttons to move the cursor horizontally
within the particular schedule. Use the and buttons
to increase the time and select the input port. The SET
button is used to make a selection.
If you create a schedule but do not want to set the power
on time, select -- in the ON time slot.
If you do not want to use a power off time select -- in the
OFF time slot.
If there is no input selected ( -- showing in the input spot)
the input from the previous schedule will be used.
The selection of EVERY DAY within a schedule takes priority
over other schedules that are set up to operate weekly.
When schedules are overlapping, scheduled Power ON time
has priority over scheduled Power OFF time.
If there are two schedules programmed for the same time,
then the highest numbered schedule has priority.
When OFF TIMER is enabled, the SCHEDULE settings are
disabled.
DATE AND TIME
You can adjust the current date and time for the internal
clock.
You must set this item when using SCHEDULE.
After competing the setting, be sure to press the SET
button (button 5 on page 10). When using a button of the
monitor, use the INPUT button (button 5 on page 8).
English-38
OSD sc reen func tions (c ontinued)
CONFIGURATION2
NOTE : A same video signal needs to be input to each
monitor. When different monitors need to be
adjusted so that their tint can be identical, it
is recommended to use a signal distributor
(commercially available).
LANGUAGE
OSD control menus are available in eight languages.
(English, German, Spanish, French, Italian, Swedish,
Chinese, and Japanese)
OSD TURN OFF
The OSD control menu will stay on as long as it is used.
The preset choices are 5 -120 seconds.
OSD H POSITION
You can adjust the horizontal position of the OSD menu.
OSD V POSITION
You can adjust the vertical position of the OSD menu.
INFORMATION OSD
You can enable and disable the information OSD display.
The display time is selectable from 1 to 10 seconds.
NOTE : The information OSD display shows a message
when the input source is switched, the input signal
state is changed, or the input signal has an error.
When TILING is activated, PIP, POP, SBS, and STILL
are disabled.
TILING doesn t work in the REAL picture size mode.
H MONITORS: Select the number of images obtained by
horizontal division.
V MONITORS: Select the number of images obtained by
vertical division.
POSITION:
Select the area you want to enlarge.
FRAME COMP.: When displaying an image across multiple
monitors, you can select the mode to
compensate for the bezel widths for
smooth and natural display.
ENABLE:
When you select ON, the image in the
selected area is enlarged on the screen.
POWER ON DELAY
MONITOR INFORMATION
The model name and the serial number of your monitor are
displayed.
MONITOR ID
ID numbers for wireless remote control are assigned to
LDT323V monitors that are multi-connected via RS-232C.
ID numbers 1 to 26 are selectable.
IR CONTROL
You can lock the wireless remote control.
and
Select from the following two modes using the
buttons and then determine the selected mode by pressing
the SET button.
NORMAL:
All the remote control operations are
enabled.
LOCK:
All the remote control operations are
disabled.
NOTE: When you hold down the DISPLAY button on the
wireless remote control for at least 5 seconds, the
NORMAL mode is activated.
You can lock the wireless remote control
independently from the control buttons on the
bottom of the monitor. See page 42.
TILING
You can enlarge an image across multiple screens.
A single large screen can be con gured with up to 25
monitors. You can also divide the displayed image into up
to 5 pieces horizontally and vertically.
English-39
You can adjust the delayed time until the power-on mode
is activated at the time of recovery from the sleep mode or
power-on.
The time is selectable from OFF and 2, 4, 6, 8, 10, 20, 30,
40, and 50 seconds.
CLOSED CAPTION
You can select to display or hide captions.
OFF:
Captions are hidden.
CC1:
Captions are displayed in sync with the
primary audio.
CC2:
Information (related to the primary
audio) is displayed without sync.
CC3:
Captions are displayed in sync with the
secondary audio.
CC4:
Information (related to the secondary
audio) is displayed without sync.
TT1/ TT2/TT3/TT4: Four types of information not related to
the displayed images are displayed. (For
example, news and weather forecast.)
NOTE : Check with each supplier of your video software
and external video devices in advance whether they
are compliant with EIA-608-A.
If their video signals are not compliant with it,
images may not be displayed correctly.
CONFIGURATION2 RESET
You can reset all the CONFIGURATION2 settings to the
factory defaults.
OSD sc reen func tions (c ontinued)
CONFIGURATION3
POWER SAVE
When the power saver in the OSD menu is turned ON, the
power management function works.
RGB:
When the sync signal of computer input (RGB1, 2, 3,
or 4) is terminated, the monitor will be in the sleep
mode in several seconds.
VIDEO: When the sync signal of video input (DVD/HD,
VIDEO<S>, or VIDEO) is terminated, the monitor
will be in the sleep mode in approximately 10
minutes.
NOTE : When you select a time period in the MOTION
setting, the monitor enlarges the image and moves
it horizontally and vertically. The portions of the
image out of the display area aren t visible.
To make the entire image visible all the time, arrange
it to t within 90% of the screen area at the center.
Motion
HEAT STATUS
The statuses of the cooling fan, brightness, and internal
temperature are displayed.
NOTE : The cooling fan starts running according to the
operating temperature or when COOLING FAN is
ON in the SCREEN SAVER menu.
When the operating temperature substantially
exceeds the operation guaranteed range, the
message TEMPERATURE WARNING!! is displayed
on the screen.
SCREEN SAVER
You can set the SCREEN SAVER functions to reduce the
risk of image persistence.
GAMMA:
When you select ON, the gamma mode where image
persistence is dif cult to occur is used.
COOLING FAN:
When you select ON, the cooling fan always runs.
When you select AUTO, the built-in fan automatically starts
running according to the operating temperature.
BRIGHTNESS:
When you select ON, the brightness decreases.
MOTION:
The screen slightly moves horizontally and vertically
at regular intervals to reduce the effect of the image
persistence.
English-40
Move
Enlarged
The portion (shaded part) outside the
display area isn t displayed.
90%
SIDE BORDER COLOR
You can adjust the brightness of the black areas displayed
on both sides of 4:3 images.
CONFIGURATION3 RESET
You can reset all the CONFIGURATION3 settings to the
factory defaults.
OSD sc reen func tions (c ontinued)
ADVANCED OPTION
INPUT CHANGE
SCAN MODE
You can select the time for input switching from QUICK and
NORMAL.
NOTE : When you select QUICK, slight noise may appear.
* For the RGB1 (HDMI), DVD/HD, VIDEO<S>, and VIDEO
inputs only.
You can select the image display area.
OVERSCAN: About 95% of the input image is displayed.
UNDERSCAN: Almost 100% of the input image is
displayed.
TERMINAL SETTING
You can select the mode to display the RGB1 (HDMI)
or RGB2 (DVI-D) signal according to their signal format
depending on their source device.
ADVANCED OPTION RESET
DVI-MODE:
Select this setting when displaying the RGB2 (DVI-D) signal.
Select DVI-PC when the source device is a PC.
Select DVI-HD when the source device is a video
device.
HDMI SIGNAL:
Select this setting when displaying the RGB1 (HDMI) signal.
Select LIMITED when displaying the signal that uses 16
to 235 levels of 256 levels for each of R, G, and B. This
mode is used primarily when input comes from a video
device.
Select FULL when displaying the signal that uses all 256
levels (from level 0 to 255). This mode is used primarily
when input comes from a computer.
SCAN CONVERSION
* For the RGB1 (HDMI), DVD/HD, VIDEO<S>, and VIDEO
inputs only.
You can select the IP conversion mode.
PROGRESSIVE: Interlace signals are converted into
progressive signals. Select this setting for
normal cases.
INTERLACE:
Interlace signals are displayed without
being converted. Though this setting is
suitable for motion images, still images
aren t displayed properly.
COLOR SYSTEM
* For the VIDEO<S> and VIDEO inputs only.
You can select the color system depending on the video
device you use.
AUTO:
NTSC, PAL, SECAM, PAL60 or 4.43 NTSC is
automatically selected.
NTSC:
NTSC
PAL:
PAL
SECAM:
SECAM
4.43NTSC: 4.43 NTSC
PAL-60:
PAL60
NOTE : When you use a video device purchased from
overseas, set the COLOR SYSTEM menu.
English-41
You can reset all the ADVANCED OPTION settings to the
factory defaults.
FACTORY RESET
You can reset all the settings of PICTURE, SCREEN,
AUDIO, CONFIGURATION1, CONFIGURATION2,
CONFIGURATION3, and ADVANCED OPTION to the factory
defaults.
Note that you cannot reset the settings of LANGUAGE and
DATE AND TIME.
Other func tions
Pic ture size
Audio input c hange
RGB1, 2, 3, 4
FULL
NORMAL
CUSTOM
REAL
DVD/HD
FULL
NORMAL
DYNAMIC
CUSTOM
REAL
VIDEO, VIDEO<S>
FULL
NORMAL
DYNAMIC
CUSTOM
REAL
NORMAL
DYNAMIC
FULL
Images supplied from external devices such
as PC and DVD t the screen, keeping their
original aspect ratio.
FULL:
Images are displayed on the entire screen.
DYNAMIC:
4:3 images are enlarged on the entire
screen with non-linearity. (Round images
may be cut when enlarged.)
CUSTOM (ZOOM): You can enlarge the displayed images
beyond the active display area. The portions
of the image out of the display area aren t
visible.
REAL:
Images are displayed in their original sizes.
AUDIO3
Current selec tion (RGB2)
Resolution
Audio input mode
Picture size mode
Current selec tion (DVD/HD)
Audio input mode
Picture size mode
DVD/HD
AUDIO : 3
SIZE : FULL
VIDEO<S>, VIDEO
Current selec tion (VIDEO<S>)
Color system mode
Audio input mode
Picture size mode
VIDEO<S>
NTSC
AUDIO : 3
SIZE : NORMAL
PIP, POP
Main : RGB2
Sub : VIDEO<S>
ZOOM
Pic ture mode
RGB1, 2, 3, 4
HIGHBRIGHT
AUDIO2
AUDIO3
DVD/HD
* DVD/HD, VIDEO only
ZOOM
Other inputs
AUDIO1
RGB2
1024 x 768
48kHz 60Hz
AUDIO : 1
SIZE : FULL
Recommend
picture size
NORMAL:
AUDIO2
RGB1, 2, 3, 4
(Squeeze signal)
Normal size of
each signal
NORMAL
AUDIO1
OSD information
NORMAL
NORMAL
RGB1
HDMI
STANDARD
DVD/HD, VIDEO, VIDEO<S>
HIGHBRIGHT
STANDARD
RGB2
1024 x 768
48kHz 60Hz
AUDIO : 1
VIDEO<S>
NTSC
SIZE : FULL
sRGB
CINEMA
Main picture information
Audio input mode
Sub picture information
Main pic ture size
Control Loc k mode
You can lock the operation buttons so that the image
adjustments you made aren t changed even when the buttons
are pressed.
By holding down both the and button on the monitor for 3
seconds or longer, you can lock the operation buttons.
By holding down both the and button on the monitor for 3
seconds or longer again, you can unlock the operation buttons.
English-42
Other func tions (c ontinued)
PIP, POP func tion
The following table shows the combinations of signal inputs with which the PIP and POP modes function. However, these modes
do not function when the screen size is CUSTOM or REAL .
Sub screen
RGB1
(HDMI)
RGB2
(DVI-D)
RGB3
(D-SUB)
RGB4
(BNC)
DVD/HD
(YPbPr)
VIDEO<S>
VIDEO
RGB1 (HDMI)
RGB2 (DVI-D)
RGB3 (D-SUB)
RGB4 (BNC)
DVD/HD (YPbPr)
VIDEO<S>
VIDEO
: Supported
: Not supported
By pressing the PIP ON/OFF button on the wireless remote control, you can change the PIP, POP, and SIDE BY SIDE modes in the
order shown below.
Alternatively, you can change the modes using the PIP MODE setting of PIP in the OSD main menu. See page 37.
PIP
POP
SIDE BY SIDE
ASPECT
SIDE BY SIDE
FULL
OFF
The resolutions in the PIP, POP, and SIDE BY SIDE FULL modes are as follows:
PIP SIZE
< SMALL >
: 320 pixels X 240 pixels
< MIDDLE >
: 480 pixels X 320 pixels
< LARGE >
: 640 pixels X 480 pixels
POP SIZE
: 333 pixels X 249 pixels
SIDE BY SIDE FULL
: 679 pixels X 762 pixels
NOTE:
When the PIP, POP, or SIDE BY SIDE FULL mode has been selected, images in the sub picture always
shown above irrespective of the aspect ratio of the input image.
English-43
t the size of each mode
Tro ubleshooting
No pic ture
The signal cable should be securely connected to the display card/computer.
The display card should be securely seated in its slot.
The Main Power Switch and the computer power switch should be in the ON position.
Make sure that the correct mode has been selected on the display card or system being used.
(Please consult the display card or system manual to change the graphics mode.)
Check the monitor and your display card with respect to the compatibility and recommended settings.
Check the signal cable connectors for bent or pushed-in pins.
Power butto n does not respo nd
Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.
Image persistenc e
Please be aware that LCD Technology may experience a phenomenon known as image persistence. Image persistence occurs
when a residual or ghost image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors image
persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate
image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the
monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
NOTE:
As with all display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving screen saver at
regular intervals whenever the screen is idle or turning off the monitor when not in use.
Image is unstable, unfoc used o r swimming is apparent
Signal cable should be securely attached to the computer.
Use the OSD Image Adjust controls to focus and adjust the display by increasing or decreasing the ne adjustment.
When the display mode is changed, the OSD Image Adjust settings may need to be re-adjusted.
Check the monitor and your display card with respect to the compatibility and recommended signal timings.
If the displayed text is garbled, change the video mode to the non-interlace mode and use 60 Hz refresh rate.
Image of c o mpo nent signal is greenish
Check to see if the DVD/HD input connector is selected.
LED o n the monito r is not lit (No green or red c o lo r c an be seen)
Power Switch should be in the ON position and power cord should be connected.
Make certain the computer is not in the power-saving mode (touch the keyboard or mouse).
RED LED on the mo nito r is blinking
A certain failure may have occurred. Please contact your nearest authorized MITSUBISHI ELECTRIC service facility.
Displayed image is no t sized pro perly
Use the OSD Image Adjust controls to increase or decrease the coarse adjustment.
Make sure that the correct mode has been selected on the display card or system being used.
(Please consult the display card or system manual to change the graphics mode.)
Selec ted reso lutio n is no t displayed properly
Use OSD Display Mode to enter Information menu and check that the appropriate resolution has been selected. If not, select
corresponding option.
No so und
Check to see if the speaker cable is properly connected.
Check to see if the mute is activated.
Check to see if the volume is set to the minimum level.
Wireless remote c o ntrol is not available
Check the wireless remote control s batteries status.
Check if the batteries are inserted correctly.
Check if the wireless remote control is pointing at the monitor s remote sensor.
SCHEDULE / OFF TIMER func tio n is no t wo rking pro perly
The SCHEDULE function will be disabled when the OFF TIMER is set.
If the OFF TIMER function is enabled and the power to the LCD monitor is turned off if the power supply is interrupted
unexpectedly, then the OFF TIMER will be reset.
Either light vertical or horizontal stripes may appear, depending on the speci c display pattern. This is no product fault or
degradation.
English-44
Spec i c atio ns
Orientation
Landsc ape / Portrait
133
83
789
701
44
Dimension (Unit: mm)
LCD Module
Diagonal (inch)
Display Mode
Panel Pitch
Resolution
Color
Brightness (typ.)
Contrast ratio
31.5 (800 mm)
VA
0.511 mm
1
x
pixels (Full HD)
Over 16 million colors
450 cd/m2
3000 : 1
Response time
Viewable Size (H x V)
Power Management
Plug and Play
Auto Adjustment
OSD user functions
Input Connector
PC Input / Output
(Analog)
(Digital)
Output Connector
Horizontal Frequency
Vertical Frequency
Video Signal
Sync Signal
Supported Resolution
Input / Output
Signal
Input Connector
AV Input / Output
(Analog)
(Digital)
Output Connector
Supported Resolution
Audio Input /
Output
Input Connector
Output Connector
Speaker / Audio Output
Input Connec tor
Control Input /
Output
Output Connector
Input Voltage / Current
Power Supply
Power Consumption
Power Consumption at Power Saving
Temperature
Operation
Environment
Humidity
Temperature
Storage
Environment
Humidity
Net (without stand)
Dimension
(W x H x D)
Gross
Net (without stand)
Weight
Gross
Wall mounting interface
Complied regulatory and guidelines
(Analog)
(Digital)
6.5 ms (Gray to Gray)
697.7 mm x 392.3 mm / 27.5 x 15.4
VESA DPM
VESA DDC2B, DDC/CI
Yes (Contrast / Position / Phase / Clock)
Brightness, Contrast, Black level, Zoom, PIP, Screen saver, Side border
color, Gamma selection, Black level expansion, Heat status, Power on
delay, Schedule, Tiling, Closed Caption, etc.
MINI D-SUB 15-pin, BNC (R, G, B, H, V) (PC/AV Common)
HDMI (PC/AV Common), DVI-D (PC/AV Common)
MINI D-SUB 15-pin
15.625/15.734, 31.5 kHz - 91.1 kHz
50/58 Hz - 85 Hz
Analog: Analog RGB, Digital: TMDS (with HDCP)
Analog: Separate (TTL), Composite (TTL), Sync on Green, Digital: TMDS
640 x 480, 800 x 600, 1024 x 768, 1280 x 768, 1360 x 768, 1280 x 1024
(Compressed/Simpli ed), 1600 x 1200 (Compressed/Simpli ed), 1920 x
1080 (Compressed/Simpli ed), 1920 x 1200 (Compressed/Simpli ed)
Composite <BNC>, Separate (Y/C) <S-TERMINAL>,
Component (Y/Pb/Pr) <BNC> (PC/AV Common)
HDMI (PC/AV Common), DVI-D (PC/AV Common)
Analog: Composite <BNC>
Composite/Separate: NTSC, PAL, SECAM, 4.43 NTSC, PAL60
Component/Digital: 480i, 480p, 576i, 576p, 1080i, 720p
RCA pin-jack L/R x 2, Stereo mini jack
HDMI (digital audio)
RCA pin-jack
External Speaker jack, 7W + 7W (8 ohm)
RS-232C <D-SUB 9-pin>
RS-232C <D-SUB 9-pin>
1.1 A - 0.48 A @100 - 240 V
103 W (85 W without speaker)
Less than W, Mechanical Power SW off: 0 W
5 - 40 C / 41 - 104 F (Landscape Mode), 5 - 35 C / 41 - 95 F (Portrait Mode)
20 - 80% (without c ondensation)
-20 - 60 C / -4 - 140 F
10 - 90% (Without condensation) / 90% -3.5% x (Temp-40 C) regarding over 40 C
789 mm (W) x 476 mm (H) x 133 mm (D) / 31.1 (W) x 18.7 (H) x 5.2 (D)
930 mm (W) x 645 mm (H) x 325 mm (D) / 36.6 (W) x 25.4 (H) x 12.8 (D)
lbs
Approximately 1 . kg /
kg / .1 lbs
Approximately
12-M6 Screws holes (100 mm / 3.94 pitches) for Monitor mount
UL60950-1 / C-UL / EN60950-1 / CE / BSMI / GOST-R / FCC-B / DOC-B /
EN55022-A / EN55024 / EN61000-3-2 / EN61000-3-3 / C-Tick / RoHS /
US Mercury / CCC
NOTE: Technical speci cations are subject to change without notice.
English-45
Pin Assignment
1) Analog RGB input (Mini D-SUB 15-pin): RGB3
Pin No
Name
Pin No
Name
1
2
Video Signal Red
Video Signal Green
9
10
+5V (DDC)
SYNC-GND
3
4
Video Signal Blue
GND
11
12
GND
DDC-SDA
5
DDC-GND
13
H-SYNC
6
7
Red-GND
Green-GND
14
15
V-SYNC
DDC-SCL
8
Blue-GND
Mini D-SUB 15-pin
5
6
10
11
15
2) Digital RGB input (HDMI): RGB1
1
2
3
4
5
6
Pin TMDS Data2+
TMDS Data2 Shield
TMDS Data2TMDS Data1+
TMDS Data1 Shield
TMDS Data1-
7
TMDS Data0+
Assignment of HDMI connector:
8 TMDS Data0 Shield
15
9 TMDS Data016
10 TMDS Clock+
17
11 TMDS Clock Shield
18
12 TMDS Clock19
13 CEC
Reserved (N.C. on
14
device)
HDMI
SCL
SDA
DDC/CEC Ground
+5V Power
Hot Plug Detect
1
2
18
3) Digital RGB input (DVI-D): RGB2
1
2
3
4
5
6
Pin TMDS Data2TMDS Data2+
TMDS Data2 Shield
NC
NC
DDC Clock
7
DDC Data
8
Analog Vertical Sync
Assignment of DVI-D connector:
9 TMDS Data117
10 TMDS Data1+
18
11 TMDS Data1 Shield
19
12 NC
20
13 NC
21
14 +5V Power
22
Ground (return for +5V,
15
23
H-SYNC and V-SYNC)
16 Hot Plug Detect
24
TMDS Data0TMDS Data0+
TMDS Data0 Shield
NC
NC
TMDS Clock Shield
DVI-D
1
9
16
17
TMDS Clock+
TMDS Clock-
4) S-VIDEO input (MINI DIN 4-pin): VIDEO<S>
Pin No
1
GND
2
GND
3
4
Y (Luminance)
C (Chroma)
MINI DIN 4-pin
Name
5) RS-232C input/output
Pin No
Name
1
NC
2
3
4
5
RXD
TXD
NC
GND
6
NC
7
8
NC
NC
9
NC
D-SUB 9-pin
1
6
English-46
9
Indication following Controlling Pollution by Electronic Information Products for (Product Name: LCD monitor)
(Model Name: LDT323V)
(1) Mark for Prevention and Control of Pollution by Electronic Information Products
Note: This symbol mark is China only.
This mark is the environmental friendly usage life of electronic information products applied to
electronic information products sold in China, and is based on the Prevention and Control of
Pollution by Electronic Information Products Law announced on February 28, 2006.
As long as the consumer uses the product while observing the safety and handling precautions,
environmental pollution or harm to human life or properties will not result within this set limit
calculated from the date of manufacture.
Note) For the environmental friendly usage life of consumable parts, such as batteries enclosed with this product, the
average product life is three years. When disposing a nished product, cooperate by following local laws and regulations on
the collection and recycling of electronic information products.
(2) Names of six hazardous substances contained, concentration and containing part
The names, concentration and parts of the six hazardous substances contained are listed below.
Hazardous/toxic substances or elements
Part name
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Printed circuit board
Liquid crystal display
Cabinet, chassis
Others (Cable, remote
control, etc.)
Remarks (Meaning of and )
: The concentration of hazardous/toxic substances in the homogeneous material of all corresponding members does not
exceed the standards set forth in SJ/ T11363-2006.
: The concentration of hazardous/toxic substances in the homogeneous materials of all corresponding members exceeds
the standards set forth in SJ/T11363-2006.
English-47
MITSUBISHI Contac t Information
Mitsubishi Electric Air-Conditioning & Visual
Information Systems (Shanghai) Ltd.
15/F, Henderson Metropolitan, No.300
East Nanjing Road, Shanghai 200001, China
Tel: +86(21)23123030
Fax: +86(21)23123000
Printed in China
AW-P
A