Avoca 9.7" TABLET User manual

MiTraveler 970
Android 4.0
9.7” Tablet User Manual
Tablet of Contents
Specifications………………………………………………………………….1
What’s inside the box…………………………………………………………1
Tablet Parts……………………………………………………………………2
Getting started………………………………………………………………...4
Connection to Internet………………………………………………………..7
Task Bar……………………………………………………………………….8
Install and Uninstall…………………………………………………………..9
Camera……………………………………………………………………… .9
HDMI………………………………………………………………………….11
Trouble Shooting…………………………………………………………….11
Specifications
Display: 9.7 inch 1024X768 Resolution Capacitive screen
CPU: Boxchip A10
RAM: 1GB DDR
Internal Storage: 16GB
Expansion Memory: USB & TF card, 32GB Max.
Built-In Wireless: 802.11b/g/n
AC Adapter: DC 5V-2A
Operating System: Android 4.0
What’s Inside The box
9.7” Tablet – 1pc
User manual -1pc
Power adapter -1pc
USB cable – 1pc
Screen Protector – 1pc
1
Tablet Parts
10
11
9
1
2
3
4
5
6
7
8
1 Headset Port
2 5Pin USB Port
3 TF card slot
4 HOST
5 HDMI
6 DC Jack
7 Power ON/OFF button
8 RESET Button
9 Back Button
10 Volume +
11 Volume 2
Getting Started
Battery Charging
The tablet has a built-in rechargeable Li-polymer battery.
1. To charge connect the AC power adapter to the DC jack on the right
side of the tablet.
2. When you see”
” in the tablet, it show the battery is charging.
3. The tablet can be used even if the battery is being charged.
Power ON/OFF
ON:
1. Press and hold the power button until the tablet turns “ON”.
OFF:
1. Press and hold the power button until device optional
2. Select power off
3. Select OK to power off the tablet
Screen Lock/Unlock:
Press the lock on the screen and slide to the right. The screen will be
unlocked.
Screen locks when:
1. System is idle.
2. Manually activated by pressing the Power button once.
How to Use TF card (Micro SD card)
1. Insert the TF card into the TF card slot. Gently push TF card into slot
until it clicks into place.
2. A prompt will be seen on the screen saying “ Preparing SD card “
Note: TF card is not included in the package.
4
Removing TF card
1. Close all applications and documents which have been opened from
the TF card.
2. Select “Setting” and find “ Storage” then click “Unmount SD card”.
3. A prompt will be seen on the screen saying “ SD card safe to remove”
4. Gently press the TF card to remove and pull out the TF card.
Note: Insert the TF card in correct position, otherwise it will damage the
card and the slot.
Software Keyboard
The tablet has a software keyboard which automatically shows up
when you tap the place on screen where text or number are to be
entered.
USB Keyboard
The unit support external USB keyboard to input text and number.
Some buttons on the unit and some function keys on keyboard may not
work if an external USB keyboard is connected.
Touch Screen
The touch screen responds to finger touch.
Note: don’t place any object on the touch screen. Otherwise it may
damage or crush the screen.
Single Click: single click one icon to choose the icon or option you want.
Long Press: press and hold one icon to choose the icon and you can drag
it to the bottom shortcut bar.
Drag: Drag on the screen and you can move between magic cube sides
or drag the application icons into the shortcut bar.
5
How to connect with computer
Note: first, put the switch to Device status,
Before transferring documents, you need set to store mode for the tablet.
1. Use USB cable to connect tablet with computer. Notice bar will appear
notice cue.
2. Press Menu button to pop up Menu option, and click on Notice.
3. In the notification panel, click on the USB connection, then click
Loading USB Storage Device.
4. The USB is successfully connected to the computer.
6
Connection to Internet
Wireless:
1. Select “ Settings”
2. Select “Wi-Fi” and slide OFF to ON status.
3. All detected wireless networks in the area will be listed on the right.
Click to select desired wireless connection.
4. Enter WEP key or network key if necessary.
5. Once connected to a wireless network, settings will be saved
6. Wireless icon will appear on the taskbar when connected
successfully.
Note: when the tablet detects the same wireless network in the future, a
pop-up notification with the name of the wireless network will appear.
Click “connect” to re-establish the connection or “Forget” to remove the
network from the list.
7
Web Browsing
Connect to the internet and launch the browser.
Task Bar
The Task Bar will show the following: SD card, Battery, Time,
Return/Back, Desktop, Menu and Wireless
micro SD card (TF card)
Battery
Time
Return/Back
Destktop
Wifi network
8
Install and Uninstall
Install from memory card or USB drive
Please go to APK Manager,Select “Install” and then select the file
with the extension name .apk in the memory card. Select “Install” to install
the software.
Install application from internet
You can use App Market to search any application you want, after
download finish it will automatic install
** Use Play Store application on the desktop to find more
applications for you tablet**
After installation, you can run the software right away or run the software
on the subcategory interface.
Uninstall
If you want to uninstall the software from a third party, please go to
APK Manager, Select the software that you want to uninstall. You will see
the following options: run, extract, uninstall and search. Click “uninstall” to
uninstall the software.
Camera
Touch the icon “Camera” to enter camera mode and the interface is
shown as follows:
9
1.Touch the icon
at the bottom right and you can save your photos
in DCIM/Camera directory in TF card.
2. Move the icon
mode to film mode.
on the right and you can switch camera
3. Touch the icon
on the top right to see the previous picture and
you can also delete, share, set it as the wallpaper or contact profile. Click
finish button to exit camera interface.
Note: this tablet supports video talking function
10
HDMI
You can switch the video to play it on the HDMI display equipment
(such as TV with a HDMI interface) by HDMI. The maximum output
resolution is 2160p and its method is shown as follows:
1. Turn on the Tablet;
2. Connect the Tablet to TV by a HDMI cable. Turn on the TV;
3. Play video on the Tablet;
4. The video will be switched on the TV. Wait for more than 5 seconds;
5. You can switch by 3 methods:
a) When the video play is finished, the video will be switched
automatically back on the Tablet.
b) You can also press Home button or Return button in the process of
video, the video will be switched back on the Tablet.
c) If you don't want to switch to TV, please disconnect the Tablet from
TV. You can continue to watch movie on Tablet.
Note:
HDMI is not included. Customer needs one HNMI to mini
HDMI cable.
Trouble Shooting
Close Application
All running applications take up system memory and will slow down
system response. Please shut down all idle applications to release
memory and get the system speed back to normal.
To close the application, click the icon
on the shortcut bar to
enter the system configuration interface. Select the Application →
Running services and the interface is shown as follows:
11
Tap the application you want to close. A pop-up window will be displayed.
Tap “Stop” to close that application.
Mandatory Power off
1. Press and hold the power button for 7 seconds and the device will be
powered off.
2. Press the reset button on the right and the device will be forced to be
powered off.
Restore Default Setting
If you want to reset the factory setting and erase all materials, please
press Settings → Backup & Reset → Factory data reset.
** Warning: Factory data reset setting will delete your Google
account, data and configuration of system and applications from
downloading.
**Please use this function carefully.
12