Philips 22PFL3415H/12 User manual

Register your product and get support at
www.philips.com/welcome
19PFL3405H/12
22PFL3405H/12
26PFL3405H/12
19PFL3405H/05
22PFL3405H/05
26PFL3405H/05
22PFL3415H/12
EN
User manual
Downloaded From TV-Manual.com Manuals
Model
Serial
www.philips.com/support
Österreich
0810 000 205
€0.07 pro Minute
België/Belgique
078250145
€0.03 Per minuut/Par minute
България
+3592 489 99 96
Местен разговор
Hrvatska
01 6403 776
Lokalni poziv
Česká republika
800142840
Bezplatný hovor
Danmark
3525 8759
Lokalt opkald
Estonia
6008600
kohalik kõne tariifi
Suomi
09 2311 3415
paikallispuhelu
France
0805 025 510
numéro sans frais
Deutschland
0800 000 7520
gebührenfreier Anruf
Ελλάδα
0 0800 3122 1280
Κλήση χωρίς χρέωση
Magyarország
0680018189
Ingyenes hívás
Hrvatska
0800 222778
free
Ireland
North 0800 055 6882
South 1800-PHILIPS 7445477
free
Italia
800 088774
Numero Verde
Қазақстан
+7 727 250 66 17
local
Latvia
52737691
local
Lithuania
67228896
local
Luxemburg/Luxembourg
40 6661 5644
Ortsgespräch/Appel local
Nederland
0800 0230076
Gratis nummer
Norge
22 70 81 11
Lokalsamtale
Polska
(022) 349-15-05
Monitory i akcesoria komputerowe,
Portugal
800 780 903
Chamada Grátis
România
0800-894910
0318107125
Apel gratuit
Apel local
Россия
(495) 961-1111
0.15 USD/minute
Србија
+381 114 440 841
Lokalni poziv
Slovensko
0800 004537
Bezplatný hovor
Slovenija
00386 12 80 95 00
lokalni klic
España
900 800 655
Teléfono local gratuito solamente para
clientes en España
Sverige
08 5792 9100
Lokalsamtal
Suisse/Schweiz/Svizzera
0844 800 544
Schweizer Festnetztarif
Türkiye
0800 261 3302
Şehiriçi arama
United Kingdom
General No: 0800 331 6015
General National Rate No:
0870 911 0036
free
National rate
Україна
8-800-500-69-70
Місцевий виклик
is correct
DownloadedThis
Frominformation
TV-Manual.com
Manualsat the time of press. For updated information, see www.philips.com/support.
1 Notice
2
2 Important
4
27
27
28
29
29
30
Automatically install channels
Manually install channels
Rename channels
Rearrange channels
Test digital reception
7 Connect devices
3 Your TV
Side controls and indicators
Remote control
4 Use your TV
Switch your TV on / off or to standby
Switch channels
Watch connected devices
Adjust TV volume
Use teletext
5 Use more of your TV
7
7
7
9
9
9
10
10
10
11
Access TV menus
11
Rename devices from the home menu 11
Remove devices from the home menu 11
Change picture and sound settings
12
Use the universal access menu
15
Use advanced teletext features
15
Create and use list of favourite channels 16
Use the Electronic Programme Guide
17
Use the TV clock
18
Use timers
19
Use TV locks
20
Use subtitles
21
View photos and play music from a USB
storage device
22
Listen to digital radio channels
23
Update the TV software
24
Change TV preferences
25
Access decoder channel
25
Start a TV demo
26
Reset the TV to factory settings
26
31
31
32
34
35
36
37
Back connector
Side connector
Connect a computer
Use a Conditional Access Module
Use Philips EasyLink
Use a Kensington lock
8 Product information
38
38
38
38
38
38
39
39
Supported display resolutions
Multimedia
Tuner / Reception / Transmission
Remote control
Power
Supported TV mounts
Product specification
9 Troubleshooting
40
40
40
40
41
41
41
41
General TV issues
TV channel issues
Picture issues
Sound issues
HDMI connection issues
Computer connection issues
Contact us
10 Index
42
EN
Downloaded From TV-Manual.com Manuals
1
Eng lish
6 Install channels
Contents
1 Notice
2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Warranty
• Risk of injury, damage to TV or void of
warranty! Never attempt to repair the TV
yourself.
• Use the TV and accessories only as
intended by the manufacturer.
• The caution sign printed on the back of
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
Any operation expressly prohibited in
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
2
EN
Downloaded From TV-Manual.com Manuals
Pixel characteristics
This LCD product has a high number of
colour pixels. Although it has effective
pixels of 99.999% or more, black dots or
bright points of light (red, green or blue)
may appear constantly on the screen.
This is a structural property of the display
(within common industry standards) and
is not a malfunction.
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many products
targeted at consumers which, like
any electronic apparatus, in general
have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles
is to take all necessary health and safety
measures for our products, to comply
with all applicable legal requirements and
to stay well within the EMF standards
applicable at the time of producing the
products.
Philips is committed to develop, produce
and market products that cause no
adverse health effects. Philips confirms
that if its products are handled properly
for their intended use, they are safe
to use according to scientific evidence
available today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments in
standardisation for early integration in its
products.
1
2
Eng lish
Mains fuse (UK only)
This TV is fitted with an approved
moulded plug. Should it become
necessary to replace the mains fuse, this
must be replaced with a fuse of the same
value as indicated on the plug (example
10A).
Remove fuse cover and fuse.
The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3
Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord cable.
Copyright
®
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Note
• Available in selected models only.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
All other registered and unregistered
trademarks are the property of their respective
owners.
EN
Downloaded From TV-Manual.com Manuals
3
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!
• Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
• Never place the TV, remote control or
batteries near naked flames or other heat
sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.
•
Never insert objects into the ventilation
slots or other openings on the TV.
• When the TV is swivelled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Risk of short circuit or fire!
• Never expose the remote control or
batteries to rain, water or excessive heat.
• Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
fire.
4
EN
Downloaded From TV-Manual.com Manuals
Risk of injury or damage to the TV!
• Two people are required to lift and carry
a TV that weighs more than 25 kg.
• When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat, level
surface that can support the combined
weight of the TV and the stand.
• When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
• Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
• Ensure that no part of the TV hangs over
the edge of the surface.
• Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
• Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of overheating!
• Never install the TV in a confined space.
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
• Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
Disposal of your old product and
batteries
Eng lish
Risk of injury, fire or power cord damage!
• Never place the TV or any objects on the
power cord.
• To disconnect the TV power cord easily
from the power outlet, ensure that you
have full access to the power cord at all
times.
• When you disconnect the power cord,
always pull the plug, never the cable.
• Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
• Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
• If the TV is transported in temperatures
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Screen care
•
•
•
•
•
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading,
wipe off water drops as soon as possible.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
EN
Downloaded From TV-Manual.com Manuals
5
ECO-Green
• High energy efficiency
• Low standby power
• Designed to facilitate recycling
Philips continuously focuses on lowering
the environmental impact of its innovative
consumer products. We aim our efforts
towards environmental improvements
during manufacturing, reduction of harmful
substances, energy-efficient use, end-of-life
instructions and product recycling.
Thanks to our environmental effort, this TV
has been awarded the European Ecolabel –the
flower– www.ecolabel.eu
You can find detailed information on standby
energy consumption, warranty policy, spare
parts and recycling of this TV on the Philips
website for your country at www.philips.com.
This TV has features that contribute to
energy-efficient use. This TV was awarded
the European Ecolabel for its environmental
qualities.
6
EN
Downloaded From TV-Manual.com Manuals
Energy efficiency features
• Energy saving
The energy saving setting of the TV
combines several TV settings that result
in saving energy. See the smart settings in
the setup menu.
• Low standby power consumption
The class-leading and highly advanced
power circuitry brings down the power
consumption of the TV to an extremely
low level, without losing out on the
constant standby functionality.
Power management (Available in selected
models only)
The advanced power management of this TV
ensures the most efficient use of its energy.
You can check how your personal TV settings,
the level of brightness in current onscreen
pictures and the surrounding light conditions
determine the relative power consumption.
End of use
To inform yourself on the correct disposal
of the TV and batteries, refer to ‘Disposal of
your old product and batteries’ in the user
manual (see ‘Disposal of your old product and
batteries’ on page 5).
Eng lish
Remote control
3 Your TV
1
2
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your TV at
www.philips.com/welcome.
22
21
20
This section gives you an overview of
commonly used TV controls and functions.
19
3
4
5
6
7
8
Side controls and indicators
18
9
17
10
11
16
12
1
2
3
13
4
15
14
5
a
+/-: Increases or decreases volume.
b
(Home): Toggles the home menu on
or off.
c P/CH +/-: Switches to the next or
previous channel.
d
(Power): Switches the product on
or off. The product is not powered
off completely unless it is physically
unplugged.
e Remote control sensor.
a
(Standby-On)
• Switches the TV to standby if it is on.
• Switches on the TV if it is in standby.
b
MENU
Toggles the main menu on or off.
c MHEG/TELETEXT
Toggles teletext on or off.
d
SOURCE
Selects connected devices.
EN
Downloaded From TV-Manual.com Manuals
7
e Colour buttons
Selects tasks or options.
f AD (Audio Descriptor) (For RF Digital
TV only)
UK only: Enables audio commentary for
the visually handicapped.
g
OPTIONS
Accesses options relating to the current
activity or selection.
h OK
Confirms an entry or selection and
displays the channel grid, when watching
TV.
i
(Navigation buttons)
Navigates menus.
j
INFO
Displays program information, when
available. If the information spans multiple
pages, press OPTIONS to go to the next
page.
k
(Mute)
Mutes or restores volume.
l P +/- (Programme +/-)
Switches to the next or previous channel.
When the TV menu is on, this functions
as Page Up / Down.
m 0-9 (Numeric buttons)
Selects a channel or setting.
n
PICTURE (Smart picture)
Launches the picture menu.
o
SOUND (Smart Sound)
Launches the sound menu.
p
+/- (Volume +/-)
Increases or decreases volume.
q
BACK P/P (Previous channel)
• Returns to a previous screen.
• Returns to the previously viewed
channel.
8
EN
Downloaded From TV-Manual.com Manuals
r
GUIDE
Switches between channel grid and
programme list.
s SUBTITLE (For RF Digital TV only)
Enables or disables subtitles.
t DEMO (Used in selected models only)
Toggles the demonstration menu on or
off.
u
FORMAT
Selects a picture format.
v
INCR. SURR
Enables Incredible Surround for stereo
sources. Enables spatial mode for mono
sources.
Remote control usage
When using the remote control, hold it close
to the TV and point it at the remote control
sensor. Make sure that the line-of-sight
between the remote control and TV is not
blocked by furniture, walls or other objects.
~5m
~30˚
4 Use your TV
Eng lish
Note
• If you cannot locate your remote control and
want to switch on the TV from standby, press
P/CH +/- on the side of the TV.
This section helps you perform basic TV
operations.
Switch your TV on / off or to
standby
Switch channels
•
•
•
•
Press P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the
Numeric buttons.
Press OK to use the channel grid.
Press
BACK P/P on the remote
control to return to the previous channel.
Note
• When you use a favourite list, you can only
select those channels in the list (see ‘Select a
favourite list’ on page 16).
To switch on
• If the standby indicator is off, press
(Power) at the side of the TV.
• If the standby indicator is red, press
(Standby-On) on the remote control.
To switch to standby
• Press (Standby-On) on the remote
control.
» The standby indicator switches to red.
To switch off
• Press (Power) at the side of the TV.
» The standby indicator switches off.
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
1
Press OK.
» The channel grid appears.
2
3
Press
Tip
• Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
to browse the channel grid.
Press OK to select a channel.
EN
Downloaded From TV-Manual.com Manuals
9
Watch connected devices
Use teletext
Note
• Switch on the device before selecting it as a
source on the TV.
Use the source button
1
Press
SOURCE.
» The source list appears.
2
3
Press
Press MHEG/TELETEXT.
» The main index page appears.
2
Select a page as follows:
• Press the Numeric buttons to enter
a page number
• Press P +/- to view the next or
previous page
• Press the Colour buttons to select a
colour coded item
• Press
BACK to return to a
previously viewed page
3
Press MHEG/TELETEXT to exit teletext.
to select a device.
Press OK to confirm your choice.
» The TV switches to the selected
device.
Adjust TV volume
To increase or decrease volume
• Press
+/-.
To mute or unmute sound
• Press to mute the sound.
• Press again to restore the sound.
10
1
EN
Downloaded From TV-Manual.com Manuals
Rename devices from the
home menu
Access TV menus
1
2
3
After adding a new device to the home menu,
you can rename it to your preference.
Menus help you to install channels, change
picture and sound settings and access other
features.
1
Press MENU.
» The menu screen appears.
Add new device
Setup
Watch TV
Press
Press
MENU.
to select a device to rename.
Press OPTIONS.
» The options menu appears.
4
Press
to select [Rename device], then
press OK.
» A text input box appears.
5
6
7
Press
to select characters.
Press OK to confirm each character.
Select [Done], then press OK to finish
renaming devices.
Note
• The device name can be up to 16 characters
long.
• Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
2
3
4
Press
to select and navigate
through one of the following menus.
• [Watch TV]: Switches back to the
aerial source if another source is
selected.
• [Add new device]: Adds new devices
to the home menu.
• [Setup]: Accesses menus to change
picture, sound and other settings.
Press OK to confirm your choice.
Press
MENU to exit.
Tip
• After selecting [Add new device], follow the
on-screen instructions to select the correct
device and connector.
Remove devices from the
home menu
If a device is no longer connected to the TV,
remove it from the home menu.
1
2
3
4
Press
5
Select [Remove], then press OK.
» The selected device is removed from
the home menu.
Press
Press
MENU.
to select a device to remove.
OPTIONS.
Press
to select [Remove device], then
press OK.
EN
Downloaded From TV-Manual.com Manuals
11
Eng lish
5 Use more of
your TV
Change picture and sound
settings
•
Change picture and sound settings to suit your
preferences. You can apply pre-defined settings
or change settings manually.
•
•
3
Note
[Energy saving]: Applies low-energy
settings.
[Natural]: Applies the best picture
quality.
[Custom]: Lists customised picture
settings.
Press OK to confirm your choice.
» The selected smart picture setting is
applied.
• When watching TV or using external devices,
press OPTIONS then select [Picture and
sound] for quick access to picture and sound
settings.
Use settings assistant
Use the settings assistant to guide you through
the picture and sound settings.
1
2
3
Press
MENU.
Press
to select [Setup] > [Picture]
> [Settings assistant].
Press OK.
» The [Settings assistant] menu appears.
Follow the on-screen instructions to
choose your preferred picture settings.
Manually adjust picture settings
1
2
3
•
•
•
•
Use smart picture
Use smart picture to apply pre-defined
picture settings.
1
Press PICTURE.
» The [Smart picture] menu appears.
2
Press
to select one of the following
settings.
• [Personal]: Applies the settings set in
[Settings assistant] menu.
• [Vivid]: Applies rich and dynamic
settings.
• [Standard]: Adjusts picture settings
to suit most environments and types
of video.
• [Cinema]: Applies settings for movie
viewing.
• [Game]: Applies settings for games.
12
EN
Downloaded From TV-Manual.com Manuals
•
•
•
•
•
•
•
Press
MENU.
Press
[Picture].
to select [Setup] >
Press
to select the following
settings.
[Smart picture]: Accesses pre-defined
smart picture settings.
[Video contrast]: Adjusts the intensity
of video contents, keeping backlight
unchanged.
[Contrast]: Adjusts the intensity of
backlight areas, keeping video contents
unchanged.
[Brightness]: Adjusts the intensity and
details of dark areas.
[Colour]: Adjusts colour saturation.
[Hue]: Compensates for colour variations.
[Sharpness]: Adjusts sharpness in the
image.
[Noise reduction]: Filters and reduces
noise in an image.
[Tint]: Adjusts the colour balance in an
image.
[Custom tint]: Customises tint setting.
(Only available if [Tint] > [Custom] is
selected)
[Digital Crystal Clear]: Fine-tunes each
pixel to match surrounding pixels. This
produces a brilliant, high-definition image.
• [Dynamic contrast]: Enhances
contrast. A [Medium] setting is
recommended.
•
•
•
•
•
[Dynamic backlight]: Adjusts
brightness of the TV backlight to
match lighting conditions.
• [MPEG artifact reduction]:
Smoothes out transitions on digital
pictures. You can switch this feature
on or off.
• [Colour enhancement]: Makes
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
[PC mode]: Adjusts the picture when a
PC is connected to the TV via HDMI or
DVI.
[Picture format]: Changes the picture
format.
[Picture size]: Adjusts the viewing area.
(when set to maximum, you might see
noise or a rough edge of an image.)
[Horizontal shift]: Adjusts the picture
horizontally for PC-VGA, DVI, HDMI or
YPbPr.
[Vertical shift]: Adjusts the picture
vertically for PC-VGA, DVI, HDMI or
YPbPr.
Change picture format
1
Press
FORMAT.
» A picture format bar appears.
2
Press
to select a picture format.
» The selected picture format is
activated.
3
Press OK to confirm your choice.
Summary of picture formats
The following picture settings can be
configured.
Note
[Auto format]: (Not for
PC mode.) Enlarges the
picture automatically to
best fit the screen. The
subtitles remain visible.
[Super zoom]: (Not
for HD and PC mode.)
Removes the black bars on
the side of 4:3 broadcasts.
There is minimal
distortion.
[4:3]: Shows the classic 4:3
format.
[Subtitle zoom]: Displays
4:3 pictures over the full
area of the screen, with
sub-titles visible. Part of
the top of the picture is
clipped off.
[Movie expand 14:9]: (Not
for HD and PC mode.)
Scales 4:3 format to 14:9.
[Movie expand 16:9]:
(Not for HD and PC
mode.) Scales 4:3 format
to 16:9.
[Wide screen]: Scales 4:3
format to 16:9.
[Unscaled]: For HD
and PC mode only,
and in selected models
only. Allows maximum
sharpness. Some
distortion may be present
due to the broadcaster’s
systems. Set your PC
resolution to wide screen
mode for best results.
• Depending on the format of the picture
source, some picture settings are not available.
EN
Downloaded From TV-Manual.com Manuals
13
Eng lish
•
Use smart sound
•
Use smart sound to apply pre-defined sound
settings.
•
1
2
3
Press SOUND.
» The [Smart sound] menu appears.
Press
to select the following settings.
• [Custom]: Applies the settings that
were customised in the sound menu.
• [Standard]: Adjusts sound settings
to suit most environments and types
of audio.
• [News]: Applies settings for spoken
audio, such as news.
• [Movie]: Applies settings for movies.
Press OK to confirm your choice.
» The selected smart sound setting is
applied.
•
•
•
•
•
•
•
Manually adjust sound settings
1
2
3
•
•
•
•
•
•
14
Press
MENU.
Press
to select [Setup] > [Sound].
» The [Sound] menu appears.
Press
to select the following
settings.
[Smart sound]: Accesses pre-defined
smart sound settings.
[Bass]: Adjusts the bass level.
[Treble]: Adjusts the treble level.
[Digital audio lipsync]: Enables or disables
lipsync audio output. When this is
enabled, the TV synchronises the audio
and video performance. When disabled,
you need to adjust the lipsync audio
feature on the external device that is
connected to the TV. (Only available with
SPDIF connection)
[Volume]: Adjusts the volume.
[Volume visually impaired]: Sets the mix
of visually impaired audio with regular
audio. When available, visually impaired
audio includes audio descriptions of onscreen action. You can also enable this by
pressing AD (Audio Descriptor). (Only
applicable for the UK region.)
EN
Downloaded From TV-Manual.com Manuals
•
[Balance]: Adjusts the balance of the right
and left speakers.
[Audio language]: Available for digital
channels, when multiple languages are
broadcast. Lists available audio languages.
[Dual I-II]: Selects audio languages if dual
sound broadcast is available.
[Mono/Stereo]: Selects mono or stereo if
stereo broadcast is available.
[TV speakers]: Turns TV speakers on or
off. (Available only when you switch on
Easylink).
[Surround]: Enables spatial sound.
[Headphone volume]: Adjusts headphone
volume.
[Auto volume levelling]: Automatically
reduces sudden volume changes, for
example, when switching channels.
[Delta volume]: Levels out volume
differences between channels or
connected devices. Switch to the
connected device before you change the
delta volume.
[SPDIF OUT]: Selects the type of digital
audio output.
• [PCM]: Converts non-PCM audio to
PCM audio.
• [Multichannel]: Outputs audio to the
home theater.
Use advanced teletext
features
You can activate the universal access menu
during the first installation. Once enabled, you
can quickly access the visually impaired and
hearing impaired menus when watching TV or
external devices.
Access the teletext options menu
Tip
Access the teletext features through the
teletext options menu.
1
Press MHEG/TELETEXT.
» The teletext screen appears.
2
Press OPTIONS.
» The teletext options menu appears.
3
Press
to select one of the following
options.
• [Reveal]: Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
• [Cycle subpage]: Cycles through
subpages automatically if subpages
are available.
• [Language]: Switches to a different
language group to display a language
correctly when it uses a different
character set.
• [Freeze page]: Freezes the current
page.
• [Dual screen] / [Full Screen]: Enables
and disables dual screen teletext.
4
Press
to make a selection, then
press OK to confirm.
5
Press
BACK to exit the teletext
options menu.
• You can also enable the universal access
menu by selecting [Setup] > [Installation] >
[Preferences] > [Universal access] > [On].
1
When watching TV, press OPTIONS.
» The TV options menu appears.
2
Select [Universal access], then press OK
or to enter.
3
Press
to select one of the following
options and press OK to enter.
• [Hearing impaired]: Enables or
disables hearing impaired subtitles.
• [Visually impaired]: Selects speaker,
headphone or both for [Volume
visually impaired] audio. Select [Off]
to disable audio descriptor. (Only
applicable to the UK region).
• [Volume visually impaired]: Adjusts
the volume of visually impaired
audio.
Eng lish
Use the universal access
menu
Tip
• Press the colour buttons on the remote
control to enter the options.
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1
Press MHEG/TELETEXT .
» The teletext screen appears.
2
3
Press
to select a teletext page.
Press
to enter a subpage.
EN
Downloaded From TV-Manual.com Manuals
15
Select T.O.P. teletext broadcasts
View all channels
Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to
another without using page numbers. T.O.P.
teletext is not broadcast on all TV channels.
You can exit a favourite list, and view all
installed channels.
1
When watching TV, press OK.
» The channel grid appears.
1
Press MHEG/TELETEXT.
» The teletext screen appears.
2
2
Press OPTIONS.
» The channel options menu appears.
Press INFO.
» The T.O.P. overview appears.
3
3
4
Press
to select [Select list], then
press OK or to enter.
Press
4
Select [All], then press OK.
» All channels are displayed in the
channel grid.
to select a subject.
Press OK to view the page.
Create and use list of
favourite channels
Note
• All favourite channels are marked by an
asterisk when you view the channel grid.
You can create a list of your preferred TV
channels so that you can find those channels
easily.
Add a channel to a favourite list
Tip
Select a favourite list
1
When watching TV, press OK to display
the channel grid.
2
Press OPTIONS.
» The channel options menu appears.
1
When watching TV, press OK.
» The channel grid appears.
3
Press
to select [Select list], then
press OK to enter.
» The channel list options appear.
2
Press
to select a channel to add to
a favourite list.
3
Press OPTIONS.
» The channel options menu appears.
4
Select [Mark as favourite], then press
OK.
» The channel is added to the favourite
list.
4
Select [Favourite], then press OK.
» Only channels in the favourite list
appear in the channel grid.
Note
• View all channels before adding a channel to a
favourite list.
• The favourite channel grid is empty until you
add channels into the favourite lists.
Note
• All favourite channels are marked by an
asterisk in the channel grid.
16
EN
Downloaded From TV-Manual.com Manuals
1
2
3
4
When watching TV, press OK.
» The channel grid appears.
Press
remove.
Press
Use EPG
1
When watching TV, press GUIDE.
» The EPG planner screen appears.
2
Press MENU.
» The program guide menu appears.
3
Press
to select an option, and then
press OK to confirm.
4
Press
to select a channel to
OPTIONS.
Select [Unmark as favourite], then press
OK.
» The channel is removed.
Eng lish
Remove a channel from a favourite
list
MENU to exit the EPG menu.
Note
• Only the channels in the [Preferred EPG
channels] list appear in the EPG menu.
Use the Electronic
Programme Guide
EPG is an on-screen guide available for digital
channels. EPG allows you to:
• View a list of digital programmes being
broadcast
• View upcoming programmes
• Group programmes by genre
• Set reminders when programmes start
• Set up preferred EPG channels
Use the EPG options menu
Use the EPG options menu to set or clear
reminders, change day and access other useful
EPG options.
1
2
4
5
Press OK to enter or activate the option.
Note
• EPG data is available only in selected countries
and can take some time to load.
• Press
GUIDE to switch between EPG and
channel grid.
Press OPTIONS.
» The EPG menu appears.
Press
to select one of the following
options.
• [Set remind] / [Clear remind]: Sets
or clears programme reminders.
• [Change day]: Sets the EPG day.
• [Show info]: Displays programme
information.
• [Search by genre]: Searches TV
programmes by genre.
• [Scheduled reminders]: Lists
programme reminders. Only
available for upcoming programmes.
• [Preferred EPG channels]: Sets
preferred EPG channels.
When watching TV, press GUIDE.
» The EPG planner screen appears
displaying information about the
scheduled programmes.
Tip
GUIDE.
3
Switch on EPG
1
Press
Press
BACK to exit the EPG menu.
Tip
• Press
GUIDE to switch between EPG and
channel grid.
EN
Downloaded From TV-Manual.com Manuals
17
Use the TV clock
You can display a clock on the TV screen. The
clock displays the current time using time data
received from your TV service operator.
Set the TV clock manually
In some countries, you need to set TV clock
manually.
1
2
3
4
5
Press
MENU.
Select [Setup] > [Features] > [Clock].
» The [Clock] menu appears.
Press
to enter time.
Select [Done] to confirm.
Press
MENU to exit.
Change the clock mode
1
2
broadcast, the clock displays the time data
from your TV service operator as priority.
MENU.
Press
to select [Setup] >
[Installation] > [Clock] > [Auto clock
mode].
3
Press
to select [Automatic] or
[Manual].
4
Press OK to confirm.
Change the time zone
1
2
3
4
Note
• If your selected country supports digital
Press
Press
MENU.
Press
to select [Setup] >
[Installation] > [Clock] > [Time zone].
Press
to select your time zone.
Press OK to confirm.
Note
• This option is only available if you select [Auto
clock mode] > [Manual] (in countries with
clock transmission data).
Display the TV clock
Use daylight saving
1
1
2
2
3
When watching TV, press OPTIONS.
» The TV option menu appears.
Select [Clock].
Press OK.
Note
MENU.
Press
to select [Setup] >
[Installation] > [Clock] > [Daylight
saving].
3
4
Press OK or
5
Press OK to confirm.
• To disable the clock, repeat the above
procedure.
Press
to enter [Daylight saving].
Press
to select [Standard time] or
[Daylight saving time].
Note
• This option is only available if you select [Auto
clock mode] > [Manual].
18
EN
Downloaded From TV-Manual.com Manuals
You can set timers to switch the TV to standby
at a specified time.
Tip
• Set the TV clock before you use timers.
Automatically switch the TV to
standby (sleep timer)
Automatically switch the TV on (on
timer)
You can switch the TV to a specified channel
at a specified time, from standby or power-on
mode.
1
2
1
2
Press
MENU.
Press
to select [Setup] >
[Features] > [Sleep timer].
» The [Sleep timer] menu appears.
3
Press
to select a value between zero
and 180 minutes.
» The sleep timer can be set in steps of
five minutes. If set to zero, the sleep
timer is switched off.
4
Press OK to switch on the sleep timer.
» The TV switches to standby after the
specified time.
Press
to select [Setup] >
[Features] > [On timer].
Press to enter the [On timer] menu.
• [Activate]: Selects how often the TV
is switched on.
• [Time]: Sets the time to switch on
the TV.
• [Programme no.]: Selects the
channel or the connected device.
4
Press
Tip
sleep timer during the countdown.
MENU.
3
Sleep timer switches the TV to standby after a
pre-defined period of time.
• You can switch off your TV earlier or reset the
Press
MENU to exit.
Tip
• Select [On timer] > [Activate] > [Off] to
disable this feature.
EN
Downloaded From TV-Manual.com Manuals
19
Eng lish
Use timers
Use TV locks
You can prevent your children from watching
certain programmes or channels by locking the
TV controls.
Set or change your PIN code
1
2
3
Press
MENU.
Press
to select [Setup] >
[Features] > [Set code] / [Change code].
» The [Set code] / [Change code] menu
appears.
Enter your code using the Numeric
buttons.
» Follow the on-screen instructions to
create or change your PIN code.
Tip
Lock or unlock one or more channels
1
When watching TV, press OK to display
the channel grid.
2
Press
unlock.
3
4
Press
5
For each selection, press OK to lock or
unlock the channel.
» The first time you lock or unlock a
channel, you are prompted to enter
your PIN code.
6
Enter your code and press OK.
» If the channel is locked, a lock icon is
displayed.
7
Repeat the process to lock or unlock
more channels.
• If you forget your code, enter ‘8888’ to
override any existing codes.
to select a channel to lock or
OPTIONS.
Press
to select [Lock channel] or
[Unlock channel].
Note
Lock or unlock the TV
• Switch the TV off and on again for the change
Lock the TV to prevent access to all channels
and connected devices.
• If you use P +/- on your remote control to
1
2
Press
MENU.
Press
to select [Setup] >
[Features] > [TV lock].
» You are prompted to enter your PIN
code.
3
Enter your code using Numeric buttons.
» The [TV lock] menu appears.
4
5
Press
6
to select [Lock] or [Unlock].
Press OK to confirm.
» All channels and connected devices are
locked or unlocked.
Press
switch between channels, the locked channels
are skipped.
• If you access the locked channels from the
channel grid, you are prompted to enter your
PIN code.
Set parental ratings
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with age
ratings higher than your child’s age.
1
2
MENU to exit.
Note
• Switch the TV off and on again for the change
to take effect.
• If you select [Lock], you have to enter your
code every time you turn on your TV.
20
to take effect.
EN
Downloaded From TV-Manual.com Manuals
Press
MENU.
Press
to select [Setup] >
[Features] > [Parental rating].
» A code setup screen appears.
3
Enter your code using Numeric buttons.
» The parental rating menu appears.
4
5
6
Press
to select an age rating.
Press OK to confirm.
Press
MENU to exit.
You can enable subtitles for each TV channel.
Subtitles are broadcast via teletext or DVB-T
digital broadcasts. With digital broadcasts, you
can select a subtitle language.
Enable subtitles on analogue TV
channels
1
2
3
Select an analogue TV channel.
4
Press MHEG/TELETEXT to switch off
teletext.
Select a subtitle language on digital TV
channels
Note
• When you select a subtitle language on
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
1
2
Press MHEG/TELETEXT.
Enter the three-digit page number of the
subtitle page with the Numeric buttons.
5
Press SUBTITLE.
» The [Subtitle mode] menu appears.
6
Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
7
8
Press OK to enable subtitles.
Press
MENU.
Press
to select [Setup] >
[Features] > [Subtitle language].
3
Press OK or to enter the list of
available languages.
4
5
Press
to select a subtitle language.
Press OK to confirm.
Tip
• You can also access the [Subtitle language]
menu while watching TV by pressing
OPTIONS > [Subtitle language].
Repeat this procedure to enable subtitles
on each analogue channel.
Tip
• Select [Subtitle mode] > [Off] to disable
subtitles.
Enable subtitles on digital TV channels
1
When watching digital channels, press
SUBTITLE.
» The [Subtitle mode] menu appears.
2
Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
3
Press OK to enable subtitles.
EN
Downloaded From TV-Manual.com Manuals
21
Eng lish
Use subtitles
View photos and play music
from a USB storage device
View a slide show of your photos
1
When a full screen image of a photo is
displayed, press OK.
» A slide show begins from the selected
photo.
2
Press the following buttons to control the
slide show:
• OK to pause the slide show.
•
to go back or move forward to
the next image.
•
BACK to stop the slide show.
Caution
• Philips is not responsible if the USB storage
device is not supported, nor is it responsible
for damage or loss of data from the device.
Use the USB connector to view photos or
listen to music stored on a USB storage device.
1
2
3
4
Turn on the TV.
Connect the USB storage device to the
TV.
» The home menu appears.
Press
Change slide show settings
1
When viewing a slide show, press
OPTIONS.
» The slide show options menu appears.
2
Press
to select one of the following.
• [Start Slideshow] / [Stop Slideshow]:
Starts or stops a slide show.
• [Slideshow transitions]: Sets the
transition from one picture to the
next.
• [Slideshow frequency]: Sets the
amount of time that a picture is
shown.
• [Rotate image]: Rotates a picture.
• [Show info]: Displays the picture
name, date, size and next picture in
the slide show.
3
Press OK to confirm your setting.
to select [Browse USB].
Press OK to confirm.
» The USB thumbnail browser appears.
Tip
• Press
GUIDE to switch between thumbnail
and file browsing views.
View photos
1
In the USB browser, press
[Picture] folder.
2
Press
album.
3
Press OK to view a full screen image of
the photo.
to enter the
to select a photo or a photo
Note
Tip
• When in full screen mode, press
between photos.
22
EN
Downloaded From TV-Manual.com Manuals
• [Rotate image] and [Show info] appear only
to move
when you press OK to pause the slideshow.
1
In the USB thumbnail browser view,
select [Music] and press to enter.
• Press GUIDE to switch between
thumbnail and file browsing views.
2
Press
album.
3
Press OK to play the selected music.
Button
OK
/
to select a music track or
Function
Pause, resume play or stop
playback.
Go to the previous or next
music.
Music settings
When listening to music, press OPTIONS
to access one of the following music settings.
• [Start playback] / [Stop playback]: Starts
or stops the music.
• [Repeat] / [Play once]: Repeats a song. /
Disables repeat play and plays a song or
album once.
• [Shuffle on] / [Shuffle off]: Enables or
disables random play of songs.
• [Show info]: Displays the file name.
• [TV speakers] (Available only when you
activate Easylink): Sets the TV speakers
on or off.
• [Sound]: Adjusts the sound setting.
Disconnect a USB storage device
Caution
• Follow this procedure to avoid damage to your
USB storage device.
1
2
Press
BACK to exit the USB browser.
Wait for five seconds then disconnect the
USB storage device.
Listen to digital radio
channels
If digital broadcasting is available, digital radio
channels are installed automatically during
installation.
1
When watching TV, press OK to display
the channel grid.
2
3
Press
4
Press
to select a radio channel and
press OK to listen.
OPTIONS.
Press
to select [Select list] > [Radio].
» The radio channel grid appears.
Note
• Select [Select list] > [All] to exit radio
channels and view all channels.
View a slideshow with music
You can view a picture slide show with
background music.
1
2
3
Select an album of songs.
4
5
Select an album of pictures.
Press OK.
Press
BACK to return to the USB
content browser.
Press OK.
EN
Downloaded From TV-Manual.com Manuals
23
Eng lish
Listen to music
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Check the current software version
1
2
Press
MENU.
Press
to select [Setup] >
[Software update] > [Current software
inf].
» The TV displays the current software
information.
Download the software
1
On your PC, open a web browser and go
to www.philips.com/support.
2
Download the latest software upgrade
file to your PC.
3
4
Decompress the ZIP-file.
Update using a USB device
Connect your USB storage device to the TV.
1
If the software update screen does not
appear automatically, select [Setup] >
[Software update] > [Local updates] >
[USB].
2
Press OK to update the TV software
manually.
3
Follow the on-screen instructions to
complete the update.
Note
• The TV restarts after the software update is
complete.
Update using OAD
1
If using (DVB-T) digital broadcast, your
TV automatically receives software
updates. If you receive a message on
your screen asking you to update your
software:
• Select [Update now] to update the
software immediately.
• Select [Remind me later] to exit the
update screen at that time and be
reminded later.
• Select [Cancel] to skip the update.
2
If you select [Cancel], you can manually
access the OAD update by selecting
[Setup] > [Software update] > [Local
updates] > [OAD].
3
Select the available version of OAD and
press OK.
4
Follow the on-screen instructions to start
the update.
Copy the autorun.upg file to the root
directory of the USB device.
Update software
You can update the TV software via a USB
storage device or OAD (Over the Air
software Download).
Note
• The TV restarts after the software update is
complete.
24
EN
Downloaded From TV-Manual.com Manuals
Access decoder channel
Use the preferences menu to customise your
TV settings.
You can map channels provided through a
decoder or descrambler to your TV channel
selection. In this way, you can select these
channels by using the RC of your TV. The
decoder or a descrambler must be connected
to EXT1 (SCART).
1
2
3
4
5
Press
MENU.
Select [Setup] > [Installation] >
[Preferences].
• [Location]: Optimises TV settings for
your location - home or shop.
• [Volume bar]: Displays the volume
bar when you adjust the volume.
• [Channel Information]: Displays
information about the TV channel
every time you switch channels.
Select [Full] to view channel
information or [Off] to turn off the
channel information.
• [Universal access]: Enables or
disables the universal access menu.
• [EasyLink]: Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
• [Pixel Plus Link]: Overrides the
settings of connected devices and
uses the settings of the TV. (Available
only when you activate Easylink).
• [E-sticker]: For shop mode only. Sets
the location of the e-sticker.
Press
to select your preference.
Set decoder channel
Map channels from a decoder or descrambler.
1
2
Press
3
4
Press
5
Select one channel to map to the
decoder / descrambler channel and press
OK to confirm.
6
7
Select [Status], then press
8
9
Press OK.
MENU.
Select [Setup] > [Installation] >
[Decoder].
to enter [Decoder] menu.
Press
to select [Channel], then press
to enter.
to enter.
Select [EXT 1] (SCART) the connector
used by the decoder / descrambler.
Press
MENU to exit.
Note
Press OK.
Press
MENU to exit.
• Select [None] if you do not want to map to
the decoder / descrambler channel.
EN
Downloaded From TV-Manual.com Manuals
25
Eng lish
Change TV preferences
Start a TV demo
You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1
2
Press DEMO on the remote control.
3
Press DEMO to exit.
Press
to select a demo and press OK
to view it.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1
2
Press
3
4
5
6
Press
26
EN
MENU.
Select [Setup] > [Installation] > [Factory
settings].
to enter [Factory settings].
Select [Reset] to start resetting.
Press OK.
Press
MENU to exit.
Downloaded From TV-Manual.com Manuals
The first time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fine tune channels.
Automatically install channels
This section describes how to search and store
channels automatically.
Step 1 Select your menu language
1
2
3
4
5
6
Press
MENU.
Press
to select [Setup] >
[Installation] > [Language] > [Menu
language].
Press OK or
Press
to enter [Menu language].
Automatically installs the available analogue
and digital TV channels and digital radio
channels.
1
From the channel installation guide
screen, select [Full installation].
2
Press OK to confirm.
» The TV starts to search and store all
the available channels.
3
When installation is complete, press OK
to exit the installation menu.
Update the channel list
You can enable automatic update of channels
when your TV is in standby mode. The
channels stored in your TV are updated every
morning according to the channel information
in the broadcast.
1
2
to select a language.
Press OK to confirm.
Press
Step 3 Install channels
to return to [Installation] menu.
Eng lish
6 Install channels
3
Press
MENU.
Press
to select [Setup] >
[Installation] > [Channel installation] >
[Standby update].
Select [On] to enable the automatic
update or select [Off] to disable it.
Step 2 Select your country
Select the country where you are installing the
TV. The available channels for the country are
installed on the TV.
1
2
Press
MENU.
Press
to select [Setup] >
[Installation] > [Channel installation] >
[Automatic channel search].
3
Press OK or to enter the menu.
» The country menu appears.
4
5
Press
to select your country.
Press OK to confirm your choice.
» The channel installation guide appears
on the screen.
EN
Downloaded From TV-Manual.com Manuals
27
Manually install channels
6
Press
found.
This section describes how to search and store
analogue TV channels manually.
7
Press
to select [Store as new
channel] to store the new channel under
a new channel number.
Step 1 Select your system
8
Press OK to enter [Store as new
channel], then press OK.
9
Press to return to the [Channel
installation] menu.
Note
• Skip this step if your system settings are
BACK when the new channel is
correct.
1
2
Step 3 Fine-tune analogue channels
Press
MENU.
Press
to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: manual install].
» The [Analogue: manual install] menu
appears.
1
2
Press
MENU.
Press
to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: manual install].
» The [Analogue: manual install] menu
appears.
3
Press
to select [System], then press
to enter.
3
4
Press
region.
Press
to select [Fine tune], then press
to enter.
Press
5
6
Press OK to confirm.
4
5
6
7
Press to enter [Store current channel],
then press OK.
8
Press to return to the [Channel
installation] menu.
to select your country or
Press to return to [Channel
installation] menu.
Step 2 Search and store new TV
channels
1
2
Press
MENU.
Press
to select [Setup] >
[Installation] > [Channel installation] >
[Analogue: manual install].
» The [Analogue: manual install] menu
appears.
3
Press
to select [Search], then press
to enter.
4
Press
to manually enter the threedigit frequency.
5
Press OK to begin search.
» If a channel is unavailable at the
selected frequency, press OK to search
for the next available channel.
28
EN
Downloaded From TV-Manual.com Manuals
to adjust frequency.
Press OK to confirm.
Press
to select [Store current
channel] to store the channel number.
Rearrange channels
You can rename channels. The name appears
when you select the channel.
After you install channels, you can rearrange the
order in which they appear.
1
When watching TV, press OK to display
the channel grid.
1
When watching TV, press OK to display
the channel grid.
2
3
Select the channel to rename.
2
Press OPTIONS.
» The channel options menu appears.
Press OPTIONS.
» The channel options menu appears.
3
Press
OK.
4
Select the channel to rearrange, then
press OK.
» The selected channel is highlighted.
5
Press
to move the highlighted
channel to the desired location, then
press OK.
6
Press OPTIONS.
» [Done reordering] appears on the
screen.
7
8
Press OK to confirm.
4
5
6
7
Press
to select [Rename channel],
then press OK.
» A text input box appears.
Press
to select characters.
Press OK to confirm each character.
Select [Done], then press OK to finish
renaming channels.
Tip
• Press [Aa] to change an uppercase letter to a
lowercase letter and vice versa.
Press
to select [Reorder], then press
BACK to exit the channel grid.
EN
Downloaded From TV-Manual.com Manuals
29
Eng lish
Rename channels
Test digital reception
You can check the quality and signal strength
of digital channels. This allows you to reposition
and test your antenna or satellite dish.
1
2
3
4
Press
MENU.
Press
to select [Setup] >
[Installation] > [Channel installation] >
[Manual channel search].
Press
to enter the menu.
Press
to enter the frequency of
the channel you want to test.
5
Press OK to confirm the frequency, then
press OK again to confirm [Search].
6
When complete, select [Store] to store
the frequency.
Note
• If the signal quality and strength is poor,
reposition the aerial or satellite dish and retest.
• If you still have problems with the reception
of your digital broadcast, contact a specialised
installer.
30
EN
Downloaded From TV-Manual.com Manuals
b EXT 2 (Y Pb Pr and AUDIO L/R)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
Eng lish
7 Connect devices
This section describes how to connect devices
with different connectors. Examples are
provided in the Quick Start.
Note
• You can use different types of connectors to
connect a device to your TV.
Back connector
c TV ANTENNA
Signal input from an antenna, cable or
satellite.
TV ANTENNA
a HDMI 1
Digital audio and video input from highdefinition digital devices such as Blu-ray
players.
Connections via DVI or VGA require an
additional audio cable (see ‘Connect a
computer’ on page 34).
EN
Downloaded From TV-Manual.com Manuals
31
d EXT 1 (CVBS and RGB)
Analogue audio and video input from
analogue or digital devices such as DVD
players or game consoles.
Side connector
e SPDIF OUT
Digital audio output to home theatres
and other digital audio systems.
SPDIF OUT
a COMMON INTERFACE
Slot for a Conditional Access Module
(CAM).
f PC IN (VGA and AUDIO)
Audio and video input from a computer.
PC AUDIO IN/ PC IN(AUDIO)
VGA
VGA
g SERV. U
For software update.
32
EN
Downloaded From TV-Manual.com Manuals
f HDMI (Available only in 26 inch TV)
Digital audio and video input from highdefinition digital devices such as Blu-ray
players.
c VIDEO
Composite video input from analogue
devices such as VCRs.
d USB
Data input from USB storage devices.
e
(Headphone)
Stereo audio output to headphones or
earphones.
EN
Downloaded From TV-Manual.com Manuals
33
Eng lish
b AUDIO L/R
Audio input from analogue devices
connected to VIDEO.
•
Connect a computer
Before you connect a computer to the TV
• Set the screen refresh rate on your
computer to 60Hz.
• Select a supported screen resolution on
your computer.
Connect a computer with one of the
following connectors:
HDMI cable and HDMI-DVI adaptor
PC AUDIO IN/ PC IN(AUDIO)
DVI
Note
• Connections via DVI or VGA require an
additional audio cable.
•
HDMI cable
•
VGA cable
PC AUDIO IN/ PC IN(AUDIO)
DVI-HDMI cable
VGA
VGA
•
PC AUDIO IN/ PC IN(AUDIO)
DVI
34
EN
Downloaded From TV-Manual.com Manuals
Access CAM services
1
After inserting and activating the CAM,
press MENU.
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
2
Press
to select [Setup] >
[Features] > [Common interface].
» Applications provided by the digital TV
service operator appear on the screen.
Note
• Refer to the documentation from your service
operator on how to insert a smart card into
the Conditional Access Module.
Eng lish
Use a Conditional Access
Module
Note
• This menu option is available only if the CAM
is inserted and activated correctly.
Insert and activate a CAM
Caution
• Be sure to follow the instructions described
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
1
Switch off the TV and disconnect it from
the power outlet.
2
Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE at the side of
the TV.
3
4
5
Push the CAM in as far as it will go.
Reconnect the TV to the power outlet.
Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM from
the slot when in use — removing the
CAM will deactivate digital services.
EN
Downloaded From TV-Manual.com Manuals
35
Use Philips EasyLink
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
Enable or disable EasyLink
Note
• Do not enable Philips EasyLink if you do not
intend to use it.
1
2
• The EasyLink-compliant device must be
switched on and selected as the source.
• Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
3
Press
MENU.
Press
to select [Setup] >
[Installation] > [Preferences] >
[EasyLink].
Select [On] or [Off].
Use one-touch play
EasyLink features
One-touch play
When you connect your TV to devices that
support one-touch play, you can control your
TV and the devices with one remote control.
One-touch standby
When you connect your TV to devices that
support standby, you can use your TV remote
control to put your TV and all connected
HDMI devices in standby mode.
System audio control
When you connect your TV to HDMI
CEC compliant devices, your TV can
switch automatically to play audio from the
connected device.
To use one-touch audio, you must map the
audio input from the connected device to
your TV.
You can use the remote control from the
connected device to adjust the volume.
36
EN
Downloaded From TV-Manual.com Manuals
1
After enabling EasyLink, press play on
your device.
» The TV automatically switches to the
correct source.
Use one-touch standby
1
Press (Standby-On) on the TV’s or
device’s remote control.
» The TV and all connected HDMI
devices switch to standby.
When you play content from an EasyLink
compliant home theater, the TV speakers are
automatically muted.
1
Enable one-touch play and one-touch
standby between your Easylink compliant
devices by following the instructions
in the previous section (see ‘Enable or
disable EasyLink’ on page 36).
2
3
Press
4
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
MENU.
Press
to select [Setup] > [Sound]
> [TV speakers] > [Auto EasyLink].
» The TV speakers are turned off
automatically when content from an
Easylink compliant system is detected.
Press
to select [Setup] > [Sound]
> [TV speakers] > [On] to disable
system audio control and enable the TV
speakers.
Note
• To mute the TV speakers, select [TV
speakers] > [Off].
EN
Downloaded From TV-Manual.com Manuals
37
Eng lish
Set TV speakers to EasyLink mode
8 Product
information
Product information is subject to change
without notice. For detailed product
information, go to www.philips.com/support.
Multimedia
•
•
Supported storage device: USB (Only
FAT or FAT 32 USB storage devices are
supported)
Supported multimedia file formats:
• Images: JPEG
• Audio: MP3
Note
Supported display resolutions
Computer formats
• Resolution - refresh rate:
• 640 x 480 - 60Hz
• 800 x 600 - 60Hz
• 1024 x 768 - 60Hz
• 1280 x 720 -60Hz
• 1280 x 1024 - 60 Hz
• 1360 x 768 - 60Hz
Video formats
• Resolution - refresh rate:
• 480i - 60Hz
• 480p - 60Hz
• 576i - 50Hz
• 576p - 50Hz
• 720p - 50Hz, 60Hz
• 1080i - 50Hz, 60Hz
• 1080p - 24Hz, 25Hz, 30Hz, 50Hz,
60Hz.
• Multimedia file names must not exceed 128
characters.
Tuner / Reception /
Transmission
•
•
•
•
•
Aerial input: 75ohm coaxial (IEC75)
DVB: DVB Terrestrial, DVB-T MPEG4
TV system: DVB COFDM 2K/8K; PAL I,
B/G, D/K; SECAM B/G, D/K, L/L’
Video playback: NTSC, SECAM, PAL
Tuner Bands: Hyperband, S-channel, UHF,
VHF
Remote control
•
•
Type: PF01E09B
Batteries: 2 x AAA (LR03 type)
Power
•
•
•
38
EN
Downloaded From TV-Manual.com Manuals
Mains power: 220-240V, 50Hz
Standby power: < 0.3 W
Ambient temperature: 5 to 40 degrees
Celsius
Product specification
To mount the TV, purchase a Philips TV mount.
To prevent damage to cables and connectors,
be sure to leave a clearance of at least 2.2
inches or 5.5cm from the back of the TV.
Design and specifications are subject to change
without notice.
Warning
• Follow all instructions provided with the TV
mount. Koninklijke Philips Electronics N.V.
bears no responsibility for improper TV
mounting that results in accident, injury or
damage.
TV screen Required
size (inches) pitch (mm)
19
22
26
75 x 75
75 x 75
75 x 75
Required
mounting bolts
(≤ 10mm)
4 x M4
4 x M4
4 x M4
19PFL3405H
• Without TV stand
• Dimension (WxHxD): 455 x 303.7 x
56 (mm)
• Weight: 3.16 kg
• With TV stand
• Dimension (WxHxD): 455 x 328.7 x
137.9 (mm)
• Weight: 3.32 kg
22PFL3405H / 22PFL3415H
• Without TV stand
• Dimension (WxHxD): 526.02 x
343.5 x 55.79 (mm)
• Weight: 4.0 kg
• With TV stand
• Dimension (WxHxD): 526.02 x
369.5 x 148.96 (mm)
• Weight: 4.2 kg
26PFL3405H
• Without TV stand
• Dimension (WxHxD): 637.4 x 410.8
x 63 (mm)
• Weight: 5.21 kg
• With TV stand
• Dimension (WxHxD): 637.41 x
447.25 x 170 (mm)
• Weight: 5.5 kg
EN
Downloaded From TV-Manual.com Manuals
39
Eng lish
Supported TV mounts
9 Troubleshooting
This section describes commonly encountered
issues and accompanying solutions.
General TV issues
The TV does not switch on:
•
Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
•
Check that the power cable is securely
connected.
The remote control is not working properly:
•
Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
•
Replace the remote control batteries if
they are flat or weak.
•
Clean the remote control and TV sensor
lens.
The standby light on the TV blinks red:
•
Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
You forgot the code to unlock the TV lock
feature
•
Enter ‘8888’.
The TV menu is in the wrong language.
•
Change the TV menu to your preferred
language.
When turning the TV on / off / to standby, you
hear a creaking sound from the TV chassis:
•
No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools down and warms up.
This does not impact performance.
40
EN
Downloaded From TV-Manual.com Manuals
TV channel issues
Previously installed channels do not appear in
the channel list:
•
Check that the correct channel list is
selected.
No digital channels were found during the
installation:
•
Check that the TV supports DVB-T,
DVB-T Lite or DVB-C in your country.
Some channels are not automatically installed
on my TV:
•
During installation, make sure that
you select the country where you are
installing the TV (see ‘Step 2 Select your
country’ on page 27).
Picture issues
The TV is on, but there is no picture:
•
Check that the antenna is properly
connected to the TV.s
•
Check that the correct device is selected
as the TV source.
There is sound but no picture:
•
Check that the picture settings are
correctly set.
There is poor TV reception from an antenna
connection:
•
Check that the antenna is properly
connected to the TV.
•
Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
•
If reception on only one channel is poor,
fine tune this channel.
There is poor picture quality from connected
devices:
•
Check that the devices are connected
properly.
•
Check that the picture settings are
correctly set.
HDMI connection issues
There are problems with HDMI devices:
•
Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
•
If the TV does not recognise the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
•
If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
•
If you use an HDMI-to-DVI adapter
or HDMI-to-DVI cable, check that an
additional audio cable is connected to
AUDIO (mini-jack only).
Computer connection issues
Sound issues
There is a picture but sound quality is poor:
Note
The computer display on the TV is not stable:
•
Check that your PC uses the supported
resolution and refresh rate.
•
Set the TV picture format to unscaled.
• If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
•
Check that all cables are properly
connected.
•
Check that the volume is not set to 0.
•
Check that the sound is not muted.
There is a picture but the sound quality is
poor:
•
Check that the sound settings are
correctly set.
There is a picture but sound comes from one
speaker only:
•
Verify that sound balance is set to the
centre.
Contact us
If you cannot resolve your problem, refer to the
FAQs for this product at www.philips.com/support.
If the problem remains unresolved, contact Philips
Consumer Care in your country as listed in the
Addendum.
Warning
• Do not attempt to repair the product yourself.
This may cause severe injury, irreparable
damage to your product or void your
warranty.
Note
• Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
EN
Downloaded From TV-Manual.com Manuals
41
Eng lish
The TV did not save your picture settings:
• Check that the TV location is set to the
home setting. This mode offers you the
flexibility to change and save settings.
The picture does not fit the screen; it is too
big or too small:
•
Try using a different picture format.
The picture position is incorrect:
•
Picture signals from some devices may
not fit the screen correctly. Check the
signal output of the device.
Cannot remove ‘e-sticker’ banner displayed on
the TV.
•
To remove the logos and images, set the
location of your TV to home.
1. Press MENU.
2. Select [Setup] > [Installation] >
[Preferences] > [Location].
3. Select [Home] and press OK.
10 Index
A
analogue
fine-tune
antenna
28
31
B
batteries
bracket for wall mount
38, 5
39
C
CAM
care
channel decoder
channel grid
channels
favourites list
fine-tune
grid
install
automatic
manual
list
lock
rename
reorder / rearrange
switch
test reception (digital channels)
troubleshooting
tune
update
child lock
lock channels
lock connected devices
PIN code
ratings lock
clock
display
set
common interface
computer
connect
display resolution
42
EN
Downloaded From TV-Manual.com Manuals
35
5
25
9
16
28
9
27
28
16
20
29
29
9
30
40
28
16
20
20
20
20
18
18
35
41, 34
38
Conditional Access Module
connect
antenna
PC
connectors
HDMI
overview
USB
content ratings
country
35
31
41, 34
41, 31
31
22
20
27
D
decoder
default settings
demo
devices
devices
add to home menu
connect
remove
rename
watch
digital channel
subtitles
test reception
digital radio
digital services
CAM
teletext
disconnect USB
display
resolution
dispose
25
26
26
10
11
31
11
11
10
21
30
23, 27
35
10, 15
23
38
5
E
EasyLink
disable
enable
one-touch play
one-touch standby
system audio control
end of life
environmental care
e-sticker
36
36
36
36
37
5
5
25
F
M
26
16
16
16
28
H
HDMI
hearing impaired
home mode
41, 31, 32
15
25
menu
language
main menu
teletext
universal access
MHEG teletext
MPEG artifact reduction
multimedia
music
digital radio
USB
with slideshow
mute TV speakers
27
11
15
15
10
12
38
23
23
23
37
I
install channels
automatic
manual
27
28
K
Kensington lock
O
OAD
on timer
one-touch play
one-touch standby
24
19, 19
36
36
37
P
L
language
menu
subtitle
troubleshoot
list
favourites list
location
country
home or shop
lock
Kensington lock
lock channels
lock connected devices
PIN code
ratings lock
27
21
40
16
27
25
37
20
20
20
20
parental rating
PC
connect
resolution
picture format
change
troubleshooting
picture settings
PIN code
pixel plus link
power
power consumption
preferences
product specifications
20
34, 41
38
13
40
12
20
25
38
38
25
38
EN
Downloaded From TV-Manual.com Manuals
43
Eng lish
factory settings
favourites list
add to list
create list
view list
fine-tune channels
R
T
radio
rearrange channels
reception
recycle
register product
remote control
batteries
overview
technical specifications
rename channels
reorder channels
resolution
restore default
23
29
30, 40
5
7
38, 5
7
38
29
29
38
26
S
safety
screen care
settings
picture
sound
settings assistant
shop mode
slideshow
view
with music
smart card
smart picture
smart settings
smart sound
software
over the air download
update
version
sound settings
specifications
standby
subpages in teletext
subtitles
language
on analogue channel
on digital channel
switch
channels
on and off
source
44
EN
Downloaded From TV-Manual.com Manuals
4
5
12
14, 12
12
25
22
23
35
12
12, 14
14
24
24
24
14
38
9
15
21
21
21
9
9
10
Table of Pages
technical specifications
teletext
features
menu
subpages
Table of Pages
use
timer
on timer
sleep timer
standby
transmission
transporting
troubleshooting
TV lock
lock channels
lock connected devices
PIN code
ratings lock
TV overview
16
38
15
15
15
16
10
19
19
19
38, 40
4
40
20
20
20
20
7
U
universal access menu
USB
disconnect USB
listen to music
update software
view photos
15
23
23
24
22
V
video format
technical specifications
volume
adjust
automatic levelling
delta
mute
38
10
14
14
10, 37
W
wall mount
4
EN
Downloaded From TV-Manual.com Manuals
45
46
EN
Downloaded From TV-Manual.com Manuals
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Downloaded From TV-Manual.com Manuals