Network Supported
MULTIMEDIA PROJECTOR
MODEL
LC-XB40N
❏ Wireless LAN
IEEE802.11b/g
❏ Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
❏ USB Memory Viewer (optionally available)
Compatible with a dedicated USB memory
✽Refer to the owner’s manuals below for details
about network and memory viewer function.
■ Network Set-up and Operation
■ Owner's Manual USB Memory
This manual is provided with optionally
supplied USB memory (Model: WL-10).
OWNER’S MANUAL
Downloaded From projector-manual.com EIKI Manuals
2
Downloaded From projector-manual.com EIKI Manuals
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display
(LCD) technology.
◆
Compact Design
◆
This projector is designed compact in size and weight.
It is easy to carry and installed anywhere you wish to
use.
◆
The Logo function allows you to customize the screen
logo (pp.49–50). You can capture an image for the
screen logo and use it for the starting-up display or
between presentations.
Capable of 360-degree Projection
This projector is capable of 360-degree projection.
◆
*Some restriction required, see page 8.
◆
◆
Simple Computer System Setting
◆
Useful Functions for Presentations
◆
◆
Power Management
◆
Lamp Control
Brightness of the projection lamp can be selected
(pp.28, 53).
LAN Network Function
This projector is loaded with the Wired and Wireless
LAN network function. You can project an image on a
computer as well as operate and manage the projector
via network. For details, refer to the owner’s manual
“Network Set-up and Operation.”
The Power management function reduces power
consumption and maintains the lamp life (p.52).
◆
Helpful Maintenance Functions
Lamp and filter maintenance functions provide for
better and proper maintenance of the projector.
- The digital zoom function allows you to focus on the
crucial information during a presentation (p.39).
- Blackboards* can be used as a projection screen.
*The board color is limited to Green (pp.36, 43).
Security Function
The Security function helps you to ensure security of
the projector. With the Key lock function, you can lock
the operation on the top control or remote control
(p.54). PIN code lock functions prevents unauthorized
use of the projector (pp.22, 54–55).
The projector has the Multi-scan system to conform to
almost all computer output signals quickly (p.32). Up to
UXGA resolution can be accepted.
◆
Multilanguage Menu Display
Operation menu is available in 16 languages; English,
German, French, Italian, Spanish, Portuguese, Dutch,
Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese (p.47).
Antitheft Alarm Function
This projector is equipped with an Antitheft alarm
function which sounds when vibration is detected
(pp.58–61). A built-in rechargeable battery is used for
the alarm.
◆
Logo Function
Memory Viewer Function (Optional Function)
Insert the dedicated USB memory (optionally supplied:
WL-10) into the projector to project images or
presentation data stored within. You do not have to
carry computers or other equipment for a presentation
*For details, refer to the owner’s manual provided with
optionally supplied USB memory.
✔Notes:
•The On-Screen Menu and figures in this manual may differ slightly from the product.
•The contents of this manual are subject to change without notice.
Downloaded From projector-manual.com EIKI Manuals
3
Table of Contents
Features and Design . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . .4
To the Owner . . . . . . . . . . . . . . . . . . . . . .5
Safety Instructions . . . . . . . . . . . . . . . . .6
Air Circulation
Moving the Projector
Installing the Projector in Proper Directions
7
7
8
Compliance . . . . . . . . . . . . . . . . . . . . . . .9
Part Names and Functions . . . . . . . . . .10
Front
Back
Bottom
Rear Terminal
Top Control
Remote Control
Laser Pointer Function
Pointer Function
Wireless Mouse Operation
Remote Control Code
Remote Control Battery Installation
Remote Control Operating Range
Adjustable Feet
10
10
10
11
12
13
14
14
15
15
16
16
16
Installation . . . . . . . . . . . . . . . . . . . . . . .17
Positioning the Projector
Connecting the AC Power Cord
Connecting to a Computer
Connecting to Video Equipment
Connecting to Component Video Equipment
17
18
19
20
21
Basic Operation . . . . . . . . . . . . . . . . . . .22
Turning On the Projector
Turning Off the Projector
How to Operate the On-Screen Menu
Menu Bar
Zoom and Focus Adjustment
Auto Setup Function
Keystone Correction
Sound Adjustment
Remote Control Operation
22
23
24
25
26
26
26
27
28
Computer Input . . . . . . . . . . . . . . . . . .30
Input Source Selection
(RGB: Computer 1 (Analog)/Computer 2 )
Input Source Selection
(RGB (PC digital), RGB (AV HDCP))
Computer System Selection
Auto PC Adjustment
Manual PC Adjustment
Image Mode Selection
Image Adjustment
Screen Size Adjustment
Input Source Selection (Video, S-video)
Input Source Selection
(Component, RGB Scart 21-pin)
Video System Selection
Image Mode Selection
Image Adjustment
Screen Size Adjustment
40
41
42
43
44
46
Setting . . . . . . . . . . . . . . . . . . . . . . . . . .47
Setting
47
Antitheft Alarm Function . . . . . . . . . . .58
How to Use the Antitheft Alarm Function
58
Maintenance and Cleaning . . . . . . . . . .62
Warning Indicator
Cleaning the Filter
Resetting the Filter Counter
Slide Shutter
Cleaning the Projection Lens
Cleaning the Projector Cabinet
Lamp Replacement
Resetting the Lamp Counter
62
63
63
64
64
64
65
66
Appendix . . . . . . . . . . . . . . . . . . . . . . . .67
Troubleshooting
Menu Tree
Indicators and Projector Condition
Compatible Computer Specifications
Technical Specifications
Optional Parts
PJ Link Notice
Configurations of Terminals
PIN Code Number Memo
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.
4
31
32
33
34
36
37
38
Video Input . . . . . . . . . . . . . . . . . . . . . .40
Trademarks
Downloaded From projector-manual.com EIKI Manuals
30
67
69
71
72
74
75
76
77
78
To the Owner
Before installing and operating this projector, read this
manual thoroughly.
This projector provides many convenient features and
functions. Operating the projector properly enables you
to manage those features and maintains it in good
condition for many years to come.
Improper operation may result in not only shortening
the product-life, but also malfunctions, fire hazard, or
other accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections
and try the solutions in the “Troubleshooting” section in
the back of this booklet. If the problem still persists,
contact the dealer where you purchased the projector or
the service center.
CAUTION
Safety Precaution
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
– This projector produces intense light from the projection
lens. Do not stare directly into the lens, otherwise eye
damage could result. Be especially careful that children
do not stare directly into the beam.
– Install the projector in a proper position. Otherwise it
may result in fire hazard.
– Allowing the proper amount of space on the top, sides,
and rear of the projector cabinet is critical for proper air
circulation and cooling of the unit. The dimension
shown here indicate the minimum space required. If the
projector is to be built into a compartment or similarly
enclosed, these minimum distances must be
maintained.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SIDE and TOP
REAR
0.7' (20 cm)
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNER'S MANUAL WITH
THIS UNIT.
NOTE: This symbol and recycle system are applied only to EU
countries and not applied to the countries in the other
area of the world.
Your EIKI product is designed and
manufactured with high quality
materials and components which can be
recycled and reused.
This symbol means that electrical and
electronic equipment, at their end-oflife, should be disposed of separately
from your household waste.
Please dispose of this equipment at your local community
waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
READ AND KEEP THIS OWNER'S MANUAL FOR
LATER USE.
Downloaded From projector-manual.com EIKI Manuals
1.5' (50 cm)
3' (1 m)
1.5' (50 cm)
– Do not cover the ventilation slot on the projector. Heat
build-up can reduce the service life of your projector,
and can also be dangerous.
– If the projector is unused for an extended time, unplug
the projector from the power outlet.
CAUTION ON HANGING FROM THE CEILING
When hanging the projector from the ceiling, clean air intake vents, filters, or top of
the projector periodically with a vacuum
cleaner. If you leave the projector unclean
for a long time, the cooling fans can be
clogged with dust, and it may cause a
breakdown or a disaster.
DO NOT SET THE PROJECTOR IN GREASY, WET, OR
SMOKY CONDITIONS SUCH AS IN A KITCHEN TO PREVENT
A BREAKDOWN OR A DISASTER. IF THE PROJECTOR
COMES IN CONTACT WITH OIL OR CHEMICALS, IT MAY
BECOME DETERIORATED.
CAUTION
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
Ne peut être utilisé dans une salle d’ordinateurs telle
que définie dans la norme ANSI/NFPA 75 Standard for
Protection of Electronic Computer/Data Processing
Equipment
5
Safety Instructions
All the safety and operating instructions should be read
before the product is operated.
Do not install the projector near the ventilation duct of airconditioning equipment.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
This projector should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supplied, consult your
authorized dealer or local power company.
Follow all warnings and instructions marked on the
projector.
Do not overload wall outlets and extension cords as this
can result in fire or electric shock. Do not allow anything
to rest on the power cord. Do not locate this projector
where the cord may be damaged by persons walking on
it.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage due to lightning and power line surges.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing serious injury to a
child or adult, and serious damage to the projector. Use
only with a cart or stand recommended by the
manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturer’s instructions,
and should use a mounting kit approved by the
manufacturers.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
Slots and openings in the back and bottom of the cabinet
are provided for ventilation, to ensure reliable operation of
the equipment and to protect it from overheating.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked
by placing the projector on a bed, sofa, rug, or other
similar surface. This projector should never be placed near
or over a radiator or heat register.
Do not attempt to service this projector yourself as
opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
Unplug this projector from wall outlet and refer servicing
to qualified service personnel under the following
conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the projector to normal
operation.
e. If the projector has been dropped or the cabinet has
been damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this
projector, ask the service technician to perform routine
safety checks to determine that the projector is in safe
operating condition.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the projector.
6
Downloaded From projector-manual.com EIKI Manuals
Voor de klanten in Nederland
NL
Bij dit produkt zijn batterijen
geleverd.
Wanneer deze leeg zijn, moet u
ze niet weggooien maar inleveren
als KCA.
Safety Instructions
Air Circulation
Moving the Projector
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked
or covered.
When moving the projector, close the slide shutter and
retract adjustable feet to prevent damage to the lens and
cabinet.
When the projector is not in use for an extended period,
put it into the supplied carrying case with the lens side up.
CAUTION
Hot air is exhausted from the exhaust vent. When using
or installing the projector, the following precautions
should be taken.
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any
objects.
– Do not touch a peripheral part of the exhaust vent,
especially screws and metallic parts. These areas will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on
the cabinet will not only get damaged but also may
cause fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
CAUTION
The carrying case (supplied) is intended for protection
against dust and scratches on surface of the cabinet, and
it is not designed to protect an appliance from external
forces. Do not transport the projector by courier or any
other transport service with this case, otherwise the
projector can be damaged. When handling the projector,
do not drop, bump, subject it to strong forces, or put
other things on the cabinet.
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
–Do not drop or bump the projector, otherwise damages
or malfunctions may result.
–When carrying the projector, use a suitable carrying case.
–Do not transport the projector by courier or any other
transport service in an unsuitable transport case. This
may cause damage to the projector. For information
about transporting the projector by courier or any other
transport service, consult your dealer.
–Do not put the projector in a case before the projector is
cooled enough.
Exhaust Vent
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Air Intake
Vents
Downloaded From projector-manual.com EIKI Manuals
7
Safety Instructions
Installing the Projector in Proper Directions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in
severe accident or fire hazard.
This projector can project the picture upward, downward, or backward, perpendicular to the plane of the screen
as shown in the figure below.
Bottom
Downward
(Usual)
Front
Upward
Bottom
Upward
Front
Downward
Positioning Precautions
Avoid positioning the projector as described below when installing.
20˚
Do not tilt the projector more than 20 degrees from side to side.
20˚
Do not put the projector on either side to project an image.
10˚
10˚
In upward projection, do not tilt the projector over 10 degrees right and left.
In downward projection, do not tilt the projector over 10 degrees right and left.
10˚
8
10˚
Downloaded From projector-manual.com EIKI Manuals
Compliance
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes
or modifications should be made, you could be required to stop operation of the equipment.
Model Number(s)
: LC-XB40N
Trade Name
: EIKI
Responsible party
: EIKI International, Inc.
Address
: 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A.
Telephone No.
: 800-242-3454 (949-457-0200)
AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.
AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories
(UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug
will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable to insert
the plug into the outlet, contact your electrician.
GROUND
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.
Downloaded From projector-manual.com EIKI Manuals
9
Part Names and Functions
Front
q
w
e
r
t
y
u
Zoom Ring
Infrared Remote Receiver
Focus Ring
Projection Lens
Slide Shutter Lever
Top Controls and Indicators
Exhaust Vent
CAUTION
Hot air is exhausted from the exhaust
vents. Do not put heat-sensitive objects
near this side.
q
we r
t
y
i
o
!0
!1
!2
!3
!4
!5
!6
!7
u
Back
Speaker
Air Intake Vents
Terminals and Connectors
Power Cord Connector
USB Terminal
LAN Connection Terminal
Lamp Cover
Air Filter
Adjustable Feet
Battery Cover
✽ Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
* Kensington is a registered trademark of ACCO Brands
Corporation.
u
Bottom
✽
i
o
!0
!2 !3
!1
✔Note:
!4
o
• !2 USB Terminal and !3 LAN Connection
Terminal are for the Network function. Refer
to the owner’s manual “Network Set-up and
Operation” and owner’s manual of Memory
viewer (optionally available).
o !5
!7
!6
10
Downloaded From projector-manual.com EIKI Manuals
!6
Part Names and Functions
Rear Terminal
q
w
e
r
i
t
o
q R/C JACK
When using the wired remote control, connect the
wired remote control to this jack with a remote
control cable (not supplied).
w USB (Series B)
In order to operate the computer with the remote
control and use the PAGE ed buttons on the
remote control during a presentation, connect the
USB port of the computer to the USB terminal with
a USB cable (not supplied) (pp.13, 19).
e SERVICE PORT
This jack is used to service the projector.
r COMPUTER IN 2/COMPONENT IN
Connect the computer or component video (or RGB
Scart) output signal to this terminal (pp.19, 21).
Use the supplied VGA cable or a Component-VGA
cable commercially available.
t MONITOR OUT
This terminal can be used to output the incoming
signal from COMPUTER IN 2/COMPONENT IN
terminal to the other monitor (p.19).
y COMPUTER IN 1/DVI-I
Connect computer output (Digital/Analog DVI-I
type) to this terminal (p.19).
u LAN Connection Terminal
Connect the LAN cable (refer to the owner’s manual
“Network Set-up and Operation”).
Downloaded From projector-manual.com EIKI Manuals
!0
y
!1
!2
u
!3
!4
i ALARM buttons
Use these buttons when setting up the Alarm
function (pp.58–59).
o VIDEO IN
Connect the composite video output signal to this
jack (p.20).
!0 AUDIO IN
Connect the audio output signal from video
equipment connected to o or !3 to this jack. For a
mono audio signal (a single audio jack), connect it
to the L (MONO) jack (p.20).
!1 COMPUTER/COMPONENT AUDIO IN
Connect the audio output (stereo) signal from a
computer or video equipment connected to r or
y to this jack (pp.19, 21).
!2 AUDIO OUT (VARIABLE)
Connect an external audio amplifier to this jack
(pp.19–21).
This terminal outputs sound from AUDIO IN terminal
(!0 or !1).
!3 S-VIDEO IN
Connect the S-VIDEO output signal from video
equipment to this jack (p.20).
!4 USB (Series A)
Connect the supplied USB Wireless LAN Adapter or
optionally available USB memory for Memory
viewer operation (refer to the owner’s manual
supplied with the optionally available USB memory).
11
Part Names and Functions
Top Control
q
w
i
e
o
r
!0
t
!1
y
u
q ALARM indicator
Blinks red when informing the setting or battery
status (pp.58–59).
w LAMP REPLACE indicator
Lights yellow when the projection lamp reaches its
end of life (pp.65, 71).
e ON/STAND–BY button
Turn the projector on or off (pp.22–23).
r INPUT button
Select an input source (pp.30–31, 40–41).
t KEYSTONE button
Correct keystone distortion (pp.26, 48).
u SELECT button
–Execute the selected item (p.24).
–Expand or compress the image in the Digital zoom
mode (p.39).
i WARNING indicator
–Lights red when the projector detects an abnormal
condition.
–Blinks red when the internal temperature of the
projector exceeds the operating range (pp.62, 71).
o POWER indicator
–Lights red when the projector is in stand-by mode.
–Lights green during operations.
–Blinks green in the Power management mode
(p.52).
y POINT ed7 8 (VOLUME +/–) buttons
–Select an item or adjust the value in the On-Screen !0 AUTO SETUP button
Correct vertical keystone distortion and adjust
Menu (p.24).
computer display parameters such as Fine sync.,
–Pan the image in the Digital zoom + mode (p.39).
Total dots, and Picture position (pp.26, 47).
–Adjust the volume level (Point 7 8 buttons) (p.27).
!1 MENU button
Open or close the On-Screen Menu (p.24).
12
Downloaded From projector-manual.com EIKI Manuals
Part Names and Functions
q L-CLICK button
Act as the left mouse button for wireless mouse operation (p.15).
Remote Control
w ON/STAND-BY button
Turn the projector on or off (pp.22–23).
e WIRED REMOTE jack
Connect the remote control cable (not supplied) to this jack when using as a wired
remote control.
r SIGNAL EMISSION indicator
Lights red while the laser beam is being emitted from the laser light window or a
signal is being sent from the remote control to the projector.
q
t VIDEO button
Select the VIDEO input source (p.40).
r
e
y COMPUTER button
Select the COMPUTER input source (pp.30–31, 41).
w
u AUTO PC button
Automatically adjust the computer image to its optimum setting (pp.28, 33, 47).
i KEYSTONE button
Correct keystone distortion (pp.26, 48).
t
y
@5
o Point ed 7 8 (VOLUME +/–) buttons
– Select an item or adjust the value in the On-Screen Menu (p.24).
– Pan the image in the Digital zoom + mode (p.39).
– Adjust the volume level (Point 7 8 buttons) (p.27).
u
i
@4
!0 MENU button
Open or close the On-Screen Menu (p.24).
!1 FREEZE button
Freeze the picture on the screen (p.28).
!2 LASER button
– Operate the Laser pointer function. Laser beam is emitted while pressing this
button for one minute. When using this laser pointer for more than one minute,
release this button and press it again (p.14).
– Display the Pointer on the screen (p.14).
o
@2
!3 PAGE ed buttons
Scroll back and forth the pages on the screen when giving a presentation. To use
these buttons, connect the projector and your computer with a USB cable (pp.11, 19)
!0
@1
!4 LAMP CONTROL button
Select a lamp mode (pp.28, 53).
!1
!2
@0
!5 D.ZOOM ed buttons
Zoom in and out the images (pp.28, 39).
@3
!8
!6 RESET/ON/ALL-OFF switch
When using the remote control, set this switch to “ON.” Set it to “ALL OFF” for power
saving when it is not used. Slide this switch to “RESET” to initialize the remote control
code or switch the Spotlight and Pointer to the Laser pointer function (pp.14–15).
!7
!7 IMAGE button
Select an image mode (pp.29, 36, 43).
!9
!3
!4
!8 MUTE button
Mute the sound (p.27).
!5
!9 P-TIMER button
Operate the P-timer function (p.29).
@0 NO SHOW button
Temporarily turn off the image on the screen (p.29).
!6
To ensure safe operation, please
observe the following precautions:
– Do not bend, drop, or expose the remote
control to moisture or heat.
– For cleaning, use a soft dry cloth. Do not
apply benzene, thinner, splay, or any
chemical material.
Downloaded From projector-manual.com EIKI Manuals
@1 R-CLICK button
Act as the right mouse button for wireless mouse operation (p.15).
@2 SELECT button
– Execute the selected item (p.24).
– Expand or compress the image in the Digital zoom mode (p.39).
@3 PRESENTATION POINTER button
Move a pointer of the projector or a pointer for wireless mouse operation (pp.14–15).
@4 AUTO SET button
Correct vertical keystone distortion and adjust the PC display parameters (pp.26, 47).
@5 NETWORK button
Select the Network input or Memory viewer input. See the owner’s manual “Network
Set-up and Operation” and owner’s manual of Memory viewer (optionally available).
13
Part Names and Functions
Laser Pointer Function
This remote control emits a laser beam from the laser light window. Press the LASER button to activate the
laser pointer. The signal emission indicator lights red and the red laser beam is emitted. If the LASER button is
pressed for more than one minute or if it is released, the laser light goes off.
The laser emitted is a Class II laser. Do not look into the laser light window or point the laser beam at yourself
or other people. The following is the caution label for the laser beam.
CAUTION: Use of controls, adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure. Never look directly into the laser light window while a laser
is emitted, otherwise eye damage may result.
The caution label is put on the remote control.
Signal Emission Indicator
Laser Light Window
Pointer Function
You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the
projected image.
1
2
3
Press and hold the MENU and NO SHOW buttons for
more than 10 seconds to activate the Pointer function.
(The Laser pointer has switched to the Pointer function.)
Press the LASER button on the remote control pointing
toward the projector. The Spotlight or Pointer is
displayed on the screen with the LASER button lighting
green. Then move the Spotlight or Pointer with the
PRESENTATION POINTER button. If the LASER button
does not light green and continues to emit a laser
beam, try the abovementioned procedure until the
LASER button lights green.
To clear the Spotlight or Pointer out the screen, press
the LASER button pointing toward the projector and see
if the LASER button lighting is turned off.
To switch to the Laser pointer again, press and hold the
NO SHOW and MENU buttons for more than 10
seconds or slide the RESET/ON/ALL-OFF switch to
“RESET” and then to “ON”.
When you reset the Pointer function, the remote control
code will be reset, as well.
Spotlight
Pointer
✔Note:
•You can choose the size of Spotlight (Large/Middle/Small) and the
pattern of Pointer (Arrow/Finger/Dot) in the Setting Menu. See
“Pointer” on page 53.
14
Downloaded From projector-manual.com EIKI Manuals
PRESENTATION POINTER
button
MENU button
NO SHOW button
Press and hold the MENU
and NO SHOW buttons for
more than 10 seconds.
PRESENTATION POINTER
button
LASER button
After the Laser pointer has
switched to the Pointer, use the
LASER button as the Pointer
function ON-OFF switch. Press the
LASER button pointing toward the
projector and see if it lights green.
Part Names and Functions
Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse,
connect your computer and the projector with a USB cable (not supplied). See “Connecting to a Computer” on
page 19. When the Pointer function is used, the wireless mouse is not available.
PRESENTATION POINTER
button
L-CLICK button
Acts as left (click) mouse
button while the projector
and a computer are
connected with a USB
cable.
Move the pointer on the screen
with this button.
R-CLICK button
Acts as right (click) mouse
button while the projector and a
computer are connected with a
USB cable.
Remote Control Code
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote
control codes prevents interference from other remote controls when several projectors or video equipment
next to each other are operated at the same time. Change the remote control code for the projector first before
changing that for the remote control. See “Remote control” in the Setting Menu on page 53.
1
Press and hold the MENU and IMAGE buttons for
more than five seconds to switch between the codes.
The code switches sequentially for one pressing the
IMAGE button. See the list below.
2
To initialize the remote control code, slide the RESET/
ON/ALL-OFF switch to “RESET,” and then to “ON.”
The initial code is set to Code 1.
Code 1
Number of Times
Pressing IMAGE
Button
1
Code 2
2
Code 3
3
Code 4
4
Code 5
5
Code 6
6
Code 7
7
Code 8
8
Remote Control Code
Downloaded From projector-manual.com EIKI Manuals
While pressing the MENU
button, press the IMAGE
button number of times
corresponding to the
remote control code.
MENU button
IMAGE button
15
Part Names and Functions
Remote Control Battery Installation
1
Open the battery
compartment lid.
2
Install new batteries
into the compartment.
Press the lid
downward and slide it.
3
Replace the
compartment lid.
Two AAA size
batteries
For correct polarity (+
and –), be sure battery
terminals are in contact
with pins in
compartment.
To insure safe operation, please observe the following precautions :
● Use two (2) AAA or LR03 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid.
● Do not expose the remote control to moisture or heat.
● Do not drop the remote control.
● If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.
● Risk of an explosion if battery is replaced by an incorrect type.
● Dispose of used batteries according to the instructions.
Remote Control Operating Range
Point the remote control toward the projector (Infrared
Remote Receiver) when pressing the buttons. Maximum
operating range for the remote control is about 16.4’ (5 m)
and 60 degrees in front of the projector.
16.4’
(5 m)
60°
Remote control
Adjustable Feet
Projection angle can be adjusted up to 9.0 degrees with the
adjustable feet.
Lift the front of the projector and pull the feet lock latches
on both side of the projector upward.
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to a proper height, and tilt.
Keystone distortion can be adjusted automatically with the
Auto setup function or manually by using the remote control
or the menu operation (see pages 26, 47–48).
Adjustable Feet
16
Downloaded From projector-manual.com EIKI Manuals
Feet Lock Latches
Installation
Positioning the Projector
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
✔Notes:
•The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain
the best image.
•All measurements are approximate and may vary from the actual sizes.
(Inch Diagonal)
32.8’ (10.0 m)
A:B=9:1
300"
Max. Zoom
22.0’ (6.7 m)
16.4’ (5.0 m)
Min. Zoom
200"
247"
10.8’ (3.3 m)
150"
4.3’ (1.3 m)
166"
100"
40"
A
124"
82"
(Center)
B
33"
Screen Size
(W x H) mm
4 : 3 aspect ratio
33”
40”
100”
150”
200”
300”
671 x 503
813 x 610
2032 x 1524
3048 x 2286
4064 x 3048
6096 x 4572
Zoom (min)
4.3’ (1.3 m)
5.2’ (1.6m)
13.1’ (4.0 m)
20.0’ (6.1 m)
26.6’ (8.1 m)
––––
Zoom (max)
––––
4.3’ (1.3m)
10.8’ (3.3 m)
16.4’ (5.0 m)
22.0’ (6.7 m)
32.8’ (10.0 m)
Downloaded From projector-manual.com EIKI Manuals
17
Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100–120 V or
200–240 V AC and it automatically selects the correct input
voltage. It is designed to work with single-phase power
systems having a grounded neutral conductor. To reduce the
risk of electrical shock, do not plug into any other type of
power system.
If you are not sure of the type of power being supplied,
consult your authorized dealer or service station.
Connect the projector with all peripheral equipment before
turning the projector on.
Connect the AC power cord (supplied) to the
projector.
The AC outlet must be near this equipment
and must be easily accessible.
CAUTION
For safety, unplug the AC power cord when the projector
is not in use. When the projector is connected to an outlet
with the AC power cord, it is in stand-by mode and
consumes a little electric power.
NOTE ON THE POWER CORD
AC power cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If supplied the AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC outlet side
For the U.S.A. and Canada
For Continental Europe
Ground
To power cord
connector on your
projector.
18
Downloaded From projector-manual.com EIKI Manuals
To the AC outlet.
(120 V AC)
To the AC outlet.
(200–240 V AC)
Installation
Connecting to a Computer
Cables used for connection
• VGA Cable (Mini D-sub 15 pin)*
• DVI-I/VGA Cable
• USB Cable
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
Monitor
Output
Audio Output USB port
Monitor
Input
Monitor
Output
External Audio Equipment
Audio Input
VGA cable
USB cable
VGA cable
DVI-I/VGA
cable
Audio cable
(stereo)
USB
COMPUTER IN 2/ MONITOR COMPUTER IN 1
DVI-I
OUT
COMPONENT
Audio cable
(stereo)
AUDIO OUT
(stereo)
COMPUTER/
COMPONENT
AUDIO IN
✔Notes:
•Input sound to the COMPUTER/COMPONENT AUDIO IN terminal
when using the COMPUTER IN 1/DVI-I and the COMPUTER IN 2/
COMPONENT IN terminal as input.
•When connecting the AUDIO OUT to external audio equipment, the
projector’s built-in speaker is disconnected.
•USB cable connection is needed when operating the computer with
the remote control or using the PAGE ed buttons on the remote
control.
Downloaded From projector-manual.com EIKI Manuals
Unplug the power cords of both the
projector and external equipment from
the AC outlet before connecting cables.
19
Installation
Connecting to Video Equipment
Cables used for connection
• Video and Audio Cable (RCA x 3)
• S-VIDEO Cable
• Audio Cable
(Cables are not supplied with the projector.)
Composite Video and Audio Output
(R) (L)
S-video Output
(Video)
External Audio Equipment
Video and
audio cable
S-video cable
Audio Input
AUDIO IN VIDEO
S-VIDEO
Audio cable
(stereo)
AUDIO OUT
(stereo)
✔Notes:
•When connecting the AUDIO OUT to external audio equipment,
the projector’s built-in speaker is disconnected.
•The S-VIDEO jack connection overrides the VIDEO jack connection
when selecting AUTO in the Input Menu (p.40).
•See page 75 for ordering optional cables.
20
Downloaded From projector-manual.com EIKI Manuals
Unplug the power cords of both the
projector and external equipment from
the AC outlet before connecting cables.
Installation
Connecting to Component Video Equipment
Cables used for connection
• Audio Cables
• Scart-VGA Cable
• Component Cable
• Component-VGA Cable
(Cables are not supplied with the projector.)
RGB Scart
21-pin Output
Component Video Output
(Y, Pb/Cb, Pr/Cr)
Audio Output
Component
cable
Scart-VGA
cable
External Audio Equipment
Audio cable
(stereo)
ComponentVGA cable
COMPUTER IN 2/COMPONENT IN
Audio Input
COMPUTER/COMPONENT
AUDIO IN
Audio cable
(stereo)
AUDIO OUT
(stereo)
✔Notes:
•When connecting the AUDIO OUT to external audio equipment,
the projector’s built-in speaker is disconnected.
•See page 75 for ordering optional cables.
Downloaded From projector-manual.com EIKI Manuals
Unplug the power cords of both the
projector and external equipment from
the AC outlet before connecting cables.
21
Basic Operation
Turning On the Projector
1
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
2
Connect the projector’s AC power cord into an AC outlet.
The POWER indicator lights red. Open the slide shutter
by sliding the slide shutter lever (see pages 10, 64).
3
Press the ON/STAND-BY button on the top control or the
remote control. The POWER indicator lights green and
the cooling fans start to operate. The preparation display
appears on the screen and the count down starts.
4
After the countdown, the input source that was
selected the last time and the lamp control status icon
(see page 53) appear on the screen.
If the projector is locked with a PIN code, PIN code
input dialog box will appear. Enter the PIN code as
instructed below.
Enter a PIN code
Use the Point ed buttons to enter a number. Press the Point
8 button to fix the number and move the red frame pointer to
the next box. The number changes to “✳.” If you fixed an
incorrect number, use the Point 7 button to move the pointer
to the number you want to correct, and then enter the correct
number.
16
The preparation display will disappear
after 30 seconds.
Selected Input Source and Lamp Control
Lamp control status
(See page 53 for Lamp control status.)
✔Note:
•The Filter warning and Lamp replacement icons
may appear on the screen depending on the
usage state of the projector.
PIN Code Input Dialog Box
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect PIN code, “PIN code” and the
number (✳✳✳✳) will turn red for a moment. Enter the correct
PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a security code
that allows the person who knows it to operate the
projector. Setting a PIN code prevents unauthorized use of
the projector.
A PIN code consists of a four-digit number. Refer to the PIN
code lock function in the Setting Menu on pages 54–55 for
locking operation of the projector with your PIN code.
CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no
longer be started. Take a special care in setting a
new PIN code; write down the number in a
column on page 78 of this manual and keep it at
hand. Should the PIN code be missing or
forgotten, consult your dealer or service center.
22
Downloaded From projector-manual.com EIKI Manuals
After the OK icon disappears,
you can operate the projector.
✔Notes:
•When the Logo select function is set to “Off,”
the logo will not be shown on the screen (p.50).
•When the “Countdown off” or “Off” is selected
in the Display function, the countdown will not
be shown on the screen (p.48).
•During the countdown period, all operations are
invalid.
•If the correct PIN code number is not entered
within three minutes after the PIN code dialog
box appeared, the projector will be turned off
automatically.
•The “1234” is set as the initial PIN code at the
factory.
•When the Input Search function is set to “On1”
or “On2”, the input signal will be searched
automatically (p.51).
Basic Operation
Turning Off the Projector
1
Press the ON/STAND-BY button on the top control or on
the remote control, and “Power off?” appears on the
screen.
2
Press the ON/STAND-BY button again to turn off the
projector. The POWER indicator starts to blink red, and
the cooling fans keep running. (You can select the level
of fans’ quietness and speed. See “Fan” on page 56.)
At this time, you can unplug the AC power cord even if
the fans are still running.
3
“Power off?” disappears after 4 seconds.
When the projector has cooled down enough, the
POWER indicator stops blinking and you can turn on
the projector. After it is cooled down completely,
unplug the AC power cord.
TO MAINTAIN THE LIFE OF THE LAMP, ONCE
YOU TURN THE PROJECTOR ON, WAIT AT
LEAST FIVE MINUTES BEFORE TURNING IT OFF.
✔Notes:
•When the On start function is set to “On,” the projector will be
turned on automatically by connecting the AC power cord to an AC
outlet (p.53).
•Do not operate the projector continuously without rest. Continuous
use may result in shortening the lamp life. Turn off the projector
and let stand for about an hour in every 24 hours.
•The running speed of cooling fans is changed according to the
temperature inside the projector.
•Do not put the projector in a case before the projector is cooled
enough.
•If the WARNING indicator blinks or lights red, see “Warning
Indicators” on page 62.
•While the POWER indicator is blinking, the lamp is being cooled
down and the projector cannot be turned on. Wait until the
POWER indicator stops blinking to turn on the projector again.
Downloaded From projector-manual.com EIKI Manuals
23
Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
1
Press the MENU button on the top control or the
remote control to display the On-Screen Menu.
2
Use the Point 7 8 buttons to select a Menu icon. Use
the Point ed buttons to select an item in the selected
menu.
3
Press the SELECT button to show the item data. Use
the Point 7 8 buttons to adjust the values.
Top Control
MENU button
POINT buttons
SELECT button
Remote Control
POINT buttons
To close the On-Screen Menu, press the MENU
button again.
✔Note:
SELECT button
•The selected item is not active until the SELECT button is pressed.
MENU button
On-Screen Menu
Menu icon
Menu bar
Pointer
(red frame)
Pointer (red frame)
Press the Point ed buttons
to move the pointer.
Item
SELECT
button
Item data
Press the Point 7 8
buttons to adjust the
value.
Quit
Exit this menu.
24
Downloaded From projector-manual.com EIKI Manuals
Basic Operation
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 69–70.
For computer source
Guide Window
PC System Menu Image Select Menu
Screen Menu
Setting Menu
Show the selected
Menu of the OnScreen Menu.
Used to select
computer
system (p.32).
Used to adjust size of
the image [Normal/
True/Wide/Full
screen/Digital zoom
+/–] (pp.38–39).
Used to set the
projector’s operating
configurations (pp.4757).
Used to select an image
mode among Dynamic,
Standard, Real,
Blackboard(Green), and
Image 1–4 (p.36).
Input Menu
PC Adjust Menu
Image Adjust Menu
Sound Menu Wired Menu
Used to select an
input source either
Computer or Video.
(pp.30–31).
Used to adjust
parameters to match
with input signal
format (pp.33–35).
Used to adjust computer
image [Contrast/Brightness/
Color temp./White balance
(R/G/B)/Sharpness/Gamma]
(pp.37–38).
Used to adjust See owner’s manual
the volume or “Network Setup
mute the sound and Operation.”
(p.27).
For video source
Input Menu
Image Select Menu
Screen Menu
Used to select an
input source either
Video or Computer
(pp.40, 41).
Used to select an image mode
among Dynamic, Standard,
Cinema, Blackboard(Green)
and Image 1–4 (p.43).
Used to set size of
image to Normal or
Wide (p.46).
Same function as
menu for computer
source.
AV System Menu
Image Adjust Menu
Used to select
system of
selected video
source (p.42).
Used to adjust picture image
[Contrast/Brightness/Color/Tint/
Color temp./White balance
(R/G/B)/Sharpness/Gamma/
Noise reduction/Progressive]
(pp.44–45).
Downloaded From projector-manual.com EIKI Manuals
Same function as
computer menu.
25
Basic Operation
Zoom and Focus Adjustment
Rotate the Zoom Ring to zoom in and out.
Rotate the Focus Ring to adjust the focus of the image.
Zoom Ring
Focus Ring
Auto Setup Function
Auto setup function is provided to automatically correct
Keystone distortion according to the projector’s tilt and
adjust the computer display parameters (Fine sync, Total
dots, and Picture position) by just pressing the AUTO
SETUP button on the top control or the AUTO SET button
on the remote control. The operational setup for the Auto
setup can be changed in the Setting menu. Refer to page
47 for the setting of the Auto setup function.
✔Notes:
•Auto Keystone corrects vertical distortion only; it does not correct
horizontal distortion.
•Auto Keystone cannot work when Ceiling feature is set to “On” in
the Setting menu (p.51).
•Perfect correction of the image distortion cannot be ensured with the
Auto setup function. If the distortion cannot be corrected properly by
pressing the AUTO SETUP/AUTO SET button, adjust manually by
pressing the KEYSTONE button on the remote control or selecting
Keystone in the Setting menu (p.48).
Top Control
AUTO SET UP
button
POINT ed buttons
Remote Control
KEYSTONE button
AUTO SET button
POINT ed buttons
Keystone Correction
If a projected picture still has keystone distortion after
pressing the AUTO SETUP button on the top control or the
AUTO SET button on the remote control, correct the image
manually as follows:
Press the KEYSTONE button on the remote control. The
Keystone dialog box appears. Use the Point ed buttons to
correct keystone distortion. The keystone adjustment can
be stored (see page 48).
Reduce the upper width
with the Point e button.
26
Reduce the lower width
with the Point d button.
Downloaded From projector-manual.com EIKI Manuals
• The white arrows indicate that there is no
correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote
control once more while the keystone dialog box is
being displayed, the keystone adjustment will be
canceled.
Basic Operation
Sound Adjustment
Direct Operation
Top Control
VOLUME+/- buttons
Volume
Press the VOLUME+/– buttons on the top control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Mute
Press the MUTE button on the remote control to temporarily
turn off the sound. To turn the sound back on, press the
MUTE button again or press the VOLUME +/– buttons. The
Mute function is also effective for the AUDIO OUT jack.
Remote Control
VOL – button
VOL + button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Sound Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to the desired item, and then press the SELECT
button.
Volume
MUTE button
Volume Dialog Box
Press the Point 8 button to turn up the volume; press the
Point 7 button to turn down the volume.
Approximate level
of the volume.
Mute
Press the Point 7 8 buttons to switch the mute function
On/Off. When the sound is turned off, “On” is displayed.
Press the Point 7 8 buttons again to turn the sound back
on.
Press the MUTE button to set the Mute function
On or Off. The dialog box disappears after 4
seconds.
Sound Menu
Sound Menu icon
Approximate level of the volume.
Exit the Sound Menu.
Downloaded From projector-manual.com EIKI Manuals
27
Basic Operation
Remote Control Operation
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER/VIDEO/NETWORK button
Press the COMPUTER, VIDEO, or NETWORK button on the
remote control to select the input source. For more detail,
see pages 30–31, 40–41.
Refer to the owner’s manual “Network Set-up and
Operation” for details about the network input.
Remote Control
COMPUTER/VIDEO/
NETWORK button
AUTO PC
button
FREEZE button
POINT ed buttons
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
AUTO PC button
Press the AUTO PC button on the remote control to operate
the Auto PC Adj. function. The computer screen adjustment
can be done easily by pressing this button. See page 33 for
details.
D.ZOOM
buttons
FREEZE button
LAMP
CONTROL
button
D.ZOOM buttons
Press the D.ZOOM buttons on the remote control to enter
to the Digital zoom +/– mode. See page 39 for details.
LAMP CONTROL button
Press the LAMP CONTROL button on the remote control to
select the lamp mode for changing the brightness on the
screen.
Auto ........... The brightness according to the input
signal (between High and Eco mode).
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness
Eco ............. Lower brightness reduces the lamp lower
consumption and extends the lamp life.
28
Downloaded From projector-manual.com EIKI Manuals
✔Note:
•See the next page for the description of other
buttons.
Basic Operation
NO SHOW button
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button. When a projected
image is captured and set as “User” in the Logo selection
(see page 49), the screen changes each time you press the
NO SHOW button as follows.
black out ➜ the captured image ➜ normal ➜
“No show” disappears after 4 seconds.
•••••
P-TIMER button
Press the P-TIMER button on the remote control. The P-Timer
display “00:00” appears on the screen and the countdown
starts (00:00–59:59).
To stop the countdown, press the P-TIMER button. To cancel
the P-Timer function, press the P-TIMER button again.
P-Timer display
Remote Control
IMAGE button
Press the IMAGE button on the remote control to select a
desired image mode of the screen. For more detail, see
pages 36, 43.
NO SHOW button
P-TIMER button
IMAGE button
✔Note:
•See the previous page for the description of
other buttons.
Downloaded From projector-manual.com EIKI Manuals
29
Computer Input
Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )
Direct Operation
Top Control
Choose either Computer 1 (Analog) or Computer 2 by
pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer 2
Video
Wired
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer 2
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Input Menu icon.
2
Use the Point ed buttons to move the red arrow
pointer to either Computer 1 (Analog) or Computer 2,
and then press the SELECT button.
3
When selecting Computer 1 (Analog), RGB input
source will be selected directly.
When selecting Computer 2, the Source Select Menu
appears. Move the pointer to RGB and then press the
SELECT button.
Input Menu icon
Input Menu
Move the pointer (red
arrow) to Computer 1
(Analog) and press the
SELECT button.
Input Menu icon
Input Menu
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
✔Notes:
•Computer 2 (COMPUTER IN 2/COMPONENT IN) can accept only
RGB signal.
•Wired, Wireless, and Memory viewer are for the Network function.
See owner’s manual “Network Set-up and Operation” and owner’s
manual of Memory viewer (optionally available).
•When the Input Search function is set to “On1” or “On2”, the
input signal will be searched automatically (p.51).
30
Downloaded From projector-manual.com EIKI Manuals
Computer
2
Move the pointer
(red arrow) to RGB.
Computer Input
Input Source Selection (RGB (PC digital), RGB (AV HDCP))
Direct Operation
Top Control
Choose Computer 1(Digital) by pressing the INPUT button
on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer 2
Video
Wired
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer 2
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Input Menu icon.
2
Use the Point ed buttons to move the red arrow
pointer to Computer 1 (Digital), and then press the
SELECT button.
3
After the Source Select Menu appeared for Computer
1 (Digital), move the pointer to RGB (PC digital) or RGB
(AV HDCP), and then press the SELECT button.
Input Menu icon
Input Menu
Move the pointer
(red arrow) to
Computer 1 (Digital)
and press the
SELECT button.
Computer
1
✔Notes:
•Computer 2 (COMPUTER IN 2/COMPONENT IN) can accept only
RGB signal.
•HDCP (High-bandwidth Digital Content Protection) is a system for
protecting digital entertainment content delivered by DVI (Digital
Visual Interface) from being copied. The specification of HDCP is
decided and controlled by Digital Content Protection, LLC. Should
the specification be changed, this projector may not display the
digital content protected by HDCP.
•Wired, Wireless, Memory viewer are for the Network function.
See owner’s manual “Network Set-up and Operation” and owner’s
manual of Memory viewer (optionally available).
•When the Input Search function is set to “On1” or “On2”, the
input signal will be searched automatically (p.51).
Downloaded From projector-manual.com EIKI Manuals
Move the pointer to
the source that you
want to select and
press the SELECT
button.
31
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or
UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this
projector automatically detects the signal format and tunes to project a proper image without any additional
settings. (Signal formats provided in this projector are shown on pages 72–73.)
One of the following messages may appear when:
Auto
The projector cannot recognize the connected
signal conforming to the provided PC Systems.
The “Auto” is displayed on the System Menu
box and the Auto PC Adjustment function works
to display proper images. If the image is not
projected properly, a manual adjustment is
required (pp.34–35).
-----
There is no signal input from the computer.
Check the connection between your computer
and the projector. (See “Troubleshooting” on
page 67.)
Mode 1
The preset system is manually adjusted in the
PC Adjust Menu. The adjusted data can be
stored in Mode 1–5 (pp.34–35).
SVGA 1
PC Systems provided in this projector is chosen.
The projector chooses a proper system provided
in the projector and displays it.
PC System Menu
The Auto PC Adjustment
function operates to adjust
the projector.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC System Menu
PC system can also be selected manually.
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the PC System Menu icon.
The PC System Menu icon
Selected system is
displayed.
2
Use the Point ed buttons to move the red arrow
pointer to the desired system and then press the
SELECT button.
Systems in this dialog box
can be selected.
Customized Mode (1–5) set in
the PC Adjust Menu (pp.34–35).
32
Downloaded From projector-manual.com EIKI Manuals
Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Direct Operation
Remote Control
The Auto PC adjustment function can be operated directly
by pressing the AUTO PC button on the remote control.
AUTO PC button
Menu Operation
PC Adjust Menu
Auto PC Adj.
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the PC Adjust Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to Auto PC Adj. and then press the SELECT
button twice.
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can
be stored in the projector. Once the parameters are stored,
the setting can be done just by selecting a Mode (1–5) in
the PC System Menu (see page 32). See also “Store” on
page 35.
PC Adjust Menu icon
Move the red frame pointer
to Auto PC Adj. and press
the SELECT button.
“Please wait...” appears
while the Auto PC
adjustment is in process.
✔Notes:
•Fine sync, Total dots, Horizontal and Vertical position of some
computers cannot be fully adjusted with the Auto PC Adjustment
function. When the image is not provided properly with this
operation, manual adjustments are required (pp.34–35).
•The Auto PC Adjustment cannot be operated when 480i, 575i,
480p, 575p, 720p,1035i, or 1080i is selected in the PC System
Menu (p.32), or when the signal is coming from the DVI-terminal.
Downloaded From projector-manual.com EIKI Manuals
33
Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas to store those parameters manually adjusted. It allows you to
recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the PC Adjust Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point 7 8 buttons to adjust the setting value.
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer
to the desired item and
press the SELECT button.
Fine sync
Use the Point 7 8 buttons to adjust the value, eliminating a
flicker from the image displayed (from 0 to 31).
Status (Stored/Free) of the
selected Mode.
Selected Mode
Total dots
Use the Point 7 8 buttons to adjust the number of total
dots in one horizontal period to match your PC image.
Use the Point 7 8 buttons
to adjust the value.
Horizontal
Use the Point 7 8 buttons to adjust the horizontal picture
position.
Vertical
Press the SELECT button
here to adjust other items.
Use the Point 7 8 buttons to adjust the vertical picture
position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync
freq. of the connected computer.
Clamp
Use the Point 7 8 buttons to adjust the clamp level. When
the image has dark bars, try this adjustment.
Press the SELECT button at
Current mode to show the
information of the connected
computer.
34
Downloaded From projector-manual.com EIKI Manuals
Computer Input
Display area H
Use the Point 7 8 buttons to adjust the horizontal area
displayed by this projector.
Display area V
Use the Point 7 8 buttons to adjust the vertical area
displayed by this projector.
Move the red frame pointer
to the desired item and
press the SELECT button.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press
the SELECT button. Move the red arrow pointer to the
Mode that you want to clear and then press the SELECT
button.
This Mode has stored
To clear adjusted data parameters.
Store
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press
the SELECT button.
Vacant
Values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and
“Display area V.”
Quit
Exit the PC Adjust Menu.
To store adjusted data
Close this dialog box.
✔Notes:
•Display area (H/V) cannot be selected when 480i, 575i, 480p,
575p, 720p, 1035i, or 1080i is selected in the PC System Menu
(p.32).
•PC Adjust Menu cannot be selected when Computer 1(Digital) is
selected in the Input Menu (p.31).
Downloaded From projector-manual.com EIKI Manuals
35
Computer Input
Image Mode Selection
Direct Operation
Remote Control
Select the desired image mode from among Dynamic,
Standard, Real, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Dynamic
For viewing pictures in a bright room.
IMAGE button
Dynamic
Standard
Real
IMAGE button
Blackboard(Green)
Standard
Normal picture mode preset on the projector.
Image 1
Real
Picture mode with improved halftone for graphics.
Image 2
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a blackboard.
This is mainly effective on a green colored board, not truly
effective on a black colored board.
Image 3
Image 4
Image 1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see page 37–38). This Image memory is
provided in each computer, component, and video input
source.
Image Select Menu icon
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Image Select Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to the desired image mode and then press the
SELECT button.
Image Select Menu
Move the red frame pointer to
the desired image mode and
press the SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Real
Picture mode with improved halftone for graphics.
Blackboard(Green)
For the image projected on a blackboard. See above for
further description.
Image 1~4
For viewing with the user preset image mode in the Image
Adjust Menu (see page 37–38).
36
Downloaded From projector-manual.com EIKI Manuals
The selected image mode is check marked.
Computer Input
Image Adjustment
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Image Adjust Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point 7 8 buttons to adjust the setting value.
Image Adjust Menu
Image Adjust Menu icon
Move the red frame
pointer to the desired
item and then press
the SELECT button.
Contrast
Press the Point 7 button to decrease the contrast; press
the Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press
the Point 8 button to increase the brightness (from 0 to 63).
Selected Image mode
Color temp.
Use the Point 7 8 buttons to select the desired Color temp.
level (High, Mid, Low, or XLow).
Use the Point 7 8 buttons
to adjust the setting value.
White balance (Red)
Press the Point 7 button to lighten red tone; press the
Point 8 button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point 7 button to lighten green tone; press the
Point 8 button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point 7 button to lighten blue tone; press the
Point 8 button to deepen blue tone (from 0 to 63).
✔Note:
•When the White balance Red, Green, or Blue is
adjusted, the Color temp. level will change to “Adj.”.
Sharpness
Press the Point 7 button to decrease the sharpness of the
image; press the Point 8 button to increase the sharpness
of the image (from 0 to 15).
Gamma
Use the Point 7 8 buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Downloaded From projector-manual.com EIKI Manuals
37
Computer Input
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point ed buttons to select one
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an “Image (1–4)” in the
Image Mode Selection on page 36.
Image Mode Menu
Move the red frame
pointer to an image
item to be set and
then press the
SELECT button.
Quit
Exit the Image Adjust Menu.
A confirmation
box appears
and then select
[Yes]
Store icon
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Screen Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to the desired function and then press the
SELECT button.
Screen Menu
Screen Menu icon
Move the red frame
pointer to the function
and press the SELECT
button.
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768), the
projector enters to the panning mode automatically. Use the
Point ed7 8 buttons to pan the image. When adjusted,
the arrows will turn red. When reached to the correction
limits, the arrows will disappear.
Wide
Provide the image to fit the wide video aspect ratio (16:9)
by expanding the image width uniformly. This function can
be used for providing a squeezed video signal at 16:9.
Full screen
Provide the full screen image.
38
Downloaded From projector-manual.com EIKI Manuals
✔Notes:
•This Screen Menu cannot be operated when
720p(HDTV), 1035i (HDTV), or 1080i (HDTV)
is selected in the PC System Menu (p.32).
•This projector cannot display any resolution
higher than 1600 x 1200. If your computer’s
screen resolution is higher than it, reset the
resolution to the lower before connecting to the
projector.
•The image data in other than 1024 x 768 is
modified to fit the screen size in initial mode.
•True, Full screen, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p.32).
Computer Input
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the “Custom” is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V............ Adjust the Horizontal/Vertical screen scale.
H&V.................... When set to “On,” the aspect ratio is
fixed. The “Scale V” appears dimmed and
becomes unavailable. Adjust “Scale H,”
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V ....... Adjust the Horizontal/Vertical screen
position.
Common ............ Save the adjusted scale. Press the
SELECT button at Common to display a
confirmation box. To save the scale, press
the SELECT button at “Yes.” When
Custom is selected, the saved scale is
used.
Reset.................. Reset the Common data. Press the
SELECT button at Reset to display a
confirmation box. To reset, press the
SELECT button at “Yes.”
Press the SELECT button at
Common or Reset, to display a
confirmation box.
✔Notes:
•When no signal is detected, “Normal” is set
automatically and the Aspect dialog box disappears.
•The adjustable range for Scale H/V and Position H/V
is limited depending on the input signal.
Remote Control
For zooming in and out the images
Digital zoom +
POINT buttons
Select Digital zoom +. The On-Screen Menu disappears and
“D. zoom +” appears. Press the SELECT button to expand
the image size. Use the Point ed7 8 buttons to pan the
image. The Panning function can work only when the image
is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM e button on the remote control.
SELECT button
D.ZOOM + button
D.ZOOM – button
Digital zoom –
Select Digital zoom –. The On-Screen Menu disappears and
“D. zoom –” appears. Press the SELECT button to compress
image size.
The projected image can be also compressed by pressing the
D.ZOOM d button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM ed buttons, SELECT, and Point buttons.
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
30–31) again, or adjust the screen size with the D.ZOOM
ed buttons.
Downloaded From projector-manual.com EIKI Manuals
✔Notes:
•The panning function may not operate properly if
the stored Mode in the PC Adjust Menu is used
(p.35).
•Minimum compression ratio can be limited
depending on the input signal or when the
Keystone function is working.
• True, Full screen, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p.32).
•Digital zoom +/- cannot be selected when Full
screen or True is selected.
39
Video Input
Input Source Selection (Video, S-video)
Direct Operation
Top Control
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
INPUT button
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer 2
Video
Wired
Remote Control
VIDEO button
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Input Menu icon.
2
Use the Point ed buttons to move the red arrow
pointer to Video and then press the SELECT button to
display the Source Select Menu.
3
Move the pointer to the desired source and then press
the SELECT button.
Auto
When selecting Auto, the projector automatically
detects incoming video signal, and adjusts itself
to optimize its performance. The projector selects
connection in the following order:
1. S-video
2. Video
Video
S-video
When video input signal is connected to the
VIDEO jack, select Video.
When video input signal is connected to the SVIDEO jack, select S-video.
✔Notes:
•Wired, Wireless, and Memory viewer are for the Network function.
See the owner’s manual “Network Set-up and Operation” and
owner’s manual of Memory viewer (optionally available).
•When the Input Search function is set to “On1” or “On2”, the
input signal will be searched automatically (p.51).
40
Downloaded From projector-manual.com EIKI Manuals
Input Menu icon
Input Menu
Move the pointer to
Video and press the
SELECT button.
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the source
that you want to select and
press the SELECT button.
Video Input
Input Source Selection (Component, RGB Scart 21-pin)
Direct Operation
Top Control
INPUT button
Choose Computer 2 by pressing the INPUT button on the
top control or press the COMPUTER button on the remote
control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Computer 1 (Analog)
Computer 1 (Digital)
Computer 2
Video
Wired
Remote Control
COMPUTER button
Computer 1 (Analog)
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Input Menu icon.
2
Use the Point ed buttons to move the red arrow
pointer to Computer 2 and then press the SELECT
button.
3
After the Source Select Menu appeared for Computer
2, move the pointer to Component or RGB(Scart) and
then press the SELECT button.
Component
Computer 1 (Digital)
Computer 2
Input Menu
When the input source is coming from video
equipment connected to the COMPUTER IN
2/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
Input Menu icon
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
Computer
2
RGB (Scart)
When the input source is coming from video
equipment connected to the COMPUTER IN
2/COMPONENT IN terminal with a ScartVGA Cable, select RGB (Scart).
Source Select Menu
Move the pointer to
Component or RGB(Scart)
and press the SELECT
button.
✔Note:
•Wired, Wireless, Memory viewer are for the Network function. See
owner’s manual “Network Set-up and Operation” and owner’s
manual of Memory viewer (optionally available).
•When the Input Search function is set to “On1” or “On2”, the
input signal will be searched automatically (p.51).
Downloaded From projector-manual.com EIKI Manuals
41
Video Input
Video System Selection
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the AV System Menu icon.
2
Use the Point ed buttons to move the red arrow
pointer to the desired system and then press the
SELECT button.
Video or S-Video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select
a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
✔Note:
•The AV System Menu cannot be selected when selecting RGB
(Scart).
42
Downloaded From projector-manual.com EIKI Manuals
AV System Menu (Video or S-Video)
AV System Menu icon
The selected system is
displayed.
Move the pointer to the
desired system and press
the SELECT button.
AV System Menu (Component)
AV System Menu icon
The selected system is
displayed.
Move the pointer to the
desired system and press
the SELECT button.
Video Input
Image Mode Selection
Direct Operation
Remote Control
Dynamic
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a blackboard.
This is mainly effective on a green colored board, not truly
effective on a black colored board.
IMAGE button
Standard
Cinema
IMAGE button
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Image 1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see page 44–45). This Image memory is
provided in each computer, component, and video input
source.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Image Select Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to the desired image mode and then press the
SELECT button.
Image Select Menu Image Select Menu icon
Move the red frame pointer to
the desired image mode and
press the SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
The selected image mode is check marked.
Cinema
Picture mode adjusted with fine tone.
Blackboard(Green)
For the image projected on a blackboard. See above for
further description.
Image1–4
For viewing with the user preset image mode in the Image
Adjust Menu (see page 44–45).
Downloaded From projector-manual.com EIKI Manuals
43
Video Input
Image Adjustment
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Image Adjust Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point 7 8 buttons to adjust the setting value.
Contrast
Image Adjust Menu
Image Adjust Menu icon
Move the red frame
pointer to the desired
item and then press
the SELECT button.
Press the Point 7 button to decrease the contrast; press
the Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press
the Point 8 button to increase the brightness (from 0 to 63).
Color
Press the Point 7 button decrease the intensity of the
color; press the Point 8 button increase the intensity of the
color (from 0 to 63).
Tint
Press the Point 7 8 buttons to adjust the tint value to get a
proper color balance (from 0 to 63).
Use the Point 7 8 buttons to
adjust the setting value.
Press the SELECT button
at this item to display other
items.
Color temp.
Use the Point 7 8 buttons to select the desired Color temp.
level (High, Mid, Low, or XLow).
White balance (Red)
Press the Point 7 button to lighten red tone; press the
Point 8 button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point 7 button to lighten green tone; press the
Point 8 button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point 7 button to lighten blue tone; press the
Point 8 button to deepen blue tone (from 0 to 63).
✔Notes:
•When the White balance Red, Green, or Blue is adjusted, the Color
temp. level will change to “Adj.”.
•Tint cannot be selected when the video system is PAL, SECAM,
PAL-M, or PAL-N (p.42).
44
Downloaded From projector-manual.com EIKI Manuals
Press the SELECT button
here to display the previous
items.
Video Input
Sharpness
Press the Point 7 button to decrease the sharpness of the
image; press the Point 8 button to increase the sharpness
of the image (from 0 to 15).
Gamma
Use the Point 7 8 buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select
one of the following options to get smoother images.
Off.......... Disabled.
L1........... Lower reduction
L2........... Higher reduction
Progressive
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off.......... Disabled.
L1........... For an active picture.
L2........... For a still picture.
Film ........ For watching a film. With this function, the
projector reproduces pictures faithful to the
original film quality.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point ed buttons to select one
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an “Image (1–4)” in the
Image Select Menu on page 43.
Quit
Exit the Image Adjust Menu.
Store icon
Image Mode Menu
Move the red frame
pointer to an image
item to be set and
then press the
SELECT button.
A confirmation box
appears and then
select [Yes].
✔Notes:
•Noise reduction and Progressive cannot be selected when 480p,
575p, 720p, 1035i, or 1080i is selected (p.42).
•Reset and Store icons will be displayed when any adjustment is
made.
Downloaded From projector-manual.com EIKI Manuals
45
Video Input
Screen Size Adjustment
This projector has the picture screen resize function, which enables you to customize the image size.
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Screen Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to the desired function and then press the
SELECT button.
Normal
Screen Menu
Screen Menu icon
Move the red frame pointer to the
desired function and press the
SELECT button.
Provide the image at the 4:3 normal video aspect ratio.
Wide
Provide the image at the 16:9 wide screen ratio.
Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the “Custom” is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V............ Adjust the Horizontal/Vertical screen
scale.
H&V.................... When set to “On,” the aspect ratio is
fixed. The “Scale V” appears dimmed
and becomes unavailable. Adjust the
“Scale H,” then the screen scale is
automatically modified based on the
aspect ratio.
Position H/V ....... Adjust the Horizontal/Vertical screen
position.
Common ............ Save the adjusted scale. Press the
SELECT button at Common to display a
confirmation box. To save the scale,
press the SELECT button at “Yes.”
When Custom is selected, the saved
scale is used.
Reset.................. Reset the Common data. Press the
SELECT button at Reset to display a
confirmation box. To reset, press the
SELECT button at “Yes.”
✔Notes:
•When no signal is detected, “Normal” is set automatically and the
Aspect dialog box disappears.
•The adjustable range for Scale H/V and Position H/V is limited
depending on the input signal.
•Screen Menu cannot be operated when 720p, 1035i, or 1080i is
selected in the AV System Menu (p42).
46
Downloaded From projector-manual.com EIKI Manuals
Press the SELECT button at
Common or Reset, to display
a confirmation box.
Setting
Setting
This projector has a Setting menu that allows you to set up
the other various functions described below.
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Setting Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to the desired item and then press the SELECT
button. The Setting dialog box appears.
Setting Menu (Language)
Set the red frame
pointer to the item
and press the
SELECT button.
Setting Menu icon
Press the SELECT button at
Language, then the
Language Menu appears.
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese.
Auto setup
This function enables Auto Keystone correction and Auto
PC adjustment by pressing the AUTO SETUP button on the
top control or the AUTO SET button on the remote control.
Settings for those functions can be altered as follows:
Auto PC Adj.
On . . . . . .Enables Auto PC Adjustment when pressing
the AUTO SET button on the remote control or
the AUTO SETUP button on the top control.
Off . . . . . .Disables Auto PC Adjustment.
Press the SELECT button
here to display the other
languages.
Auto Keystone
Auto . . . . . Always works and corrects keystone distortion
according to the projector's tilt.
Manual . . .Works only when pressing the AUTO SET
button on the remote control or the AUTO
SETUP button on the top control.
Off . . . . . .Disables Auto Keystone.
Auto setup
✔Notes:
•Auto PC Adj. and Auto Keystone cannot be set "Off" at the same
time.
•Auto Keystone corrects vertical distortion only, not correct horizontal
distortion.
•The Auto Keystone cannot work when Ceiling feature is On in the
Setting menu (p.51).
•Perfect correction of the image distortion cannot be ensured with
the Auto setup function. If the distortion is not corrected properly
by pressing the AUTO SETUP/AUTO SET button, adjust manually
by pressing the KEYSTONE button on the remote control or
selecting Keystone in the Setting menu (p.26).
Downloaded From projector-manual.com EIKI Manuals
Select Auto setup and this
box appears. Choose the
desired setting for Auto
keystone and Auto PC adj.
with the Point 7 8 buttons.
47
Setting
Keystone
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point 7 8 buttons to switch between each option.
Store ........ Keep the keystone correction even when the
AC power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.
To correct keystone distortion, press the SELECT button.
The “Keystone” appears on the screen. Use the Point ed
buttons to correct keystone distortion (p.26).
Blue back
When this function is “On,” a blue image is displayed while
the input signal is not detected.
Display
This function decides whether to display On-Screen Displays.
On ............................ Show all the On-Screen displays. Use
this function when you want to
project images after the lamp
becomes bright enough. The factory
default setting is in this option.
Countdown Off ........ Show the input image instead of the
countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off ............................ Hide the On-Screen Displays except;
●On-Screen Menu
●“Power off?” (p.23)
●“No signal” for Power management
(p.52)
●“Please wait ...”
●White arrows for the True function
in the Screen Menu (p.38)
48
Downloaded From projector-manual.com EIKI Manuals
Keystone
Use the Point 7 8
buttons to switch
between the options.
Setting
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo with
Logo select, Capture, and Logo PIN code lock functions.
✔Note:
Logo select
•When “On” is selected in the Logo PIN code lock function, Logo
select and Capture functions cannot be selected.
Logo select
This function decides on the starting-up display from
among following options.
User ......... Show the image you captured
Default ..... Show the factory-set logo
Off............ Show the countdown display only
Capture
This function enables you to capture an image being
projected to use it for a starting-up display or interval of
presentations.
Capture
Select Capture and press the SELECT button.
A confirmation box appears and select [Yes] to capture
the projected image.
After capturing the projected image, go to the Logo select
function and set it to “User”. Then the captured image
will be displayed the next time you turn on the projector
or when you press the NO SHOW button (see page 29).
To cancel the Capture function, select [No].
✔Notes:
•Before capturing an image, select “Standard” in the Image
Select Menu to capture a proper image (pp.36, 43).
•A signal from a computer can be captured up to XGA (1024 x
768). A signal from video equipment can be captured except
for 720p, 1035i, and 1080i.
•When capturing the image that has been adjusted by the
Keystone function, the adjusted data is automatically reset and
the projector captures an image without keystone correction.
•When the Logo PIN code lock function is set to “On,” the
Capture function cannot be selected.
•When starting to capture a new image, the previously stored
image is cleared even if you cancel the capturing.
Downloaded From projector-manual.com EIKI Manuals
Select [Yes] to capture
the projected image.
Select [Yes] to
stop capturing.
49
Setting
Logo PIN code lock
Logo PIN code lock
This function prevents an unauthorized person from
changing the screen logo.
Off............ The screen logo can be changed freely from
the Logo Menu (p.49).
On ............ The screen logo cannot be changed without
a Logo PIN code.
If you want to change the Logo PIN code lock setting,
press the SELECT button and the Logo PIN code dialog
box appears. Enter a Logo PIN code by following the
steps below. The initial Logo PIN code is set to “4321”
at the factory.
Enter a Logo PIN code
Enter a Logo PIN code
Use the Point ed buttons to enter a number. Press the
Point 8 button to fix the number and move the red frame
pointer to the next box. The number changes to “✳.” If
you fixed an incorrect number, use the Point 7 button to
move the pointer to the number you want to correct, and
then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to
operate the projector.
After a correct Logo PIN code
is entered, the following
dialog box appears.
Change the Logo PIN code lock setting
If you entered an incorrect Logo PIN code, “Logo PIN
code” and the number (✳✳✳✳) will turn red for a moment.
Enter the correct Logo PIN code all over again.
Change the Logo PIN code lock setting
Use the Point 7 8 button to switch On/Off, and then
press the Point d button to move the pointer to “Quit.”
Press the SELECT button to close the dialog box.
Use the Point 7 8 buttons to
switch On/Off.
Change the Logo PIN code
Change the Logo PIN code
Logo PIN code can be changed to your desired four-digit
number. Press the Point d button to select “Logo PIN
code change” and then press the SELECT button. The
New Logo PIN code input dialog box appears. Set a new
Logo PIN code.
Be sure to note the new Logo PIN code and keep it at
hand. If you lost the number, you could no longer change
the Logo PIN code setting. For details on PIN code
setting, refer to “PIN code lock” on pages 54–55.
50
Downloaded From projector-manual.com EIKI Manuals
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN
CODE, WRITE DOWN THE NEW PIN CODE IN
COLUMN OF THE LOGO PIN CODE NO. MEMO
ON PAGE 78, AND KEEP IT SECURELY.
SHOULD THE LOGO PIN CODE BE LOST OR
FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED.
Setting
Ceiling
Ceiling
When this function is set to “On,” the picture will be
top/bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture will be
left/right reversed. This function is used to project the
image from rear of the screen.
Rear
Input search
This function detects the input signal automatically. When a
signal is found, the search will stop. Use the Point 7 8
buttons to select one of the following options.
Off.......... Input search will not work.
On1 ........ Input search works under the following situation.
– When pressing the INPUT button on the top
control.
– When pressing the COMPUTER button or
VIDEO button on the remote control.
On2 ........ Input search works under the following situation.
– When turning on the projector by pressing the
ON/STAND-BY button on the top control or the
remote control.
– When pressing the COMPUTER button or
VIDEO button on the remote control.
– When pressing the INPUT button on the top
control.
– When the current input signal is cut off.*
*If the No show or Freeze function is active, cancel it to
activate the Input search. It is also unavailable when OnScreen menu is displayed.
✔Notes:
•While Input search is set to “On1” or “On2,” the status of Input and Lamp are displayed every time the signal is switched.
•Only the last selected input source can be detected.
•After searching all input signal and still can not detect any signal, Input search will operate as below:
– When pressing the INPUT button, Input search will select an input source other than previous one.
– When pressing the COMPUTER button, Input search will stop at the previous COMPUTER input.
– When pressing the VIDEO button, Input search will stop at Video.
•If the INPUT button on the top control or COMPUTER or VIDEO buttons on the remote control is pressed during Input search is
in progress, Input search will stop and go back to the previous input signal.
Downloaded From projector-manual.com EIKI Manuals
51
Setting
Standby mode
This function is available when operating the projector via
network.
Normal ....... Supply the power to the network function
even after turning off the projector. You can
turn on/off the projector via network, modify
network environment, and receive an e-mail
about projector status while the projector is
powered off.
Eco ............. Select “Eco” when you do not use the
projector via network. The projector’s
network function will stop when turning off
the projector.
Refer to the owner’s manual “Network Setup and
Operation.”
✔Note:
•When selecting Normal, the cooling fans may be running
depending on the temperature inside the projector even if the
projector is turned off.
Power management
Power management
For reducing power consumption as well as maintaining the
lamp life, the Power management function turns off the
projection lamp when the projector is not operated for a
certain period.
Time left before Lamp is off.
If the input signal is interrupted and no button is pressed for
more than 30 seconds, the timer display with “No signal”
appears. It starts the countdown until the lamp is turned off.
Use the Point 7 8 buttons to set the countdown timer.
Select one of the following options:
Ready ................... When the lamp has been fully cooled
down, the POWER indicator changes to
green blinking. In this condition, the
projection lamp will be turned on if the
input signal is reconnected or any button
on the top control or remote control is
pressed.
Shut down............ When the lamp has been fully cooled
down, the power will be turned off.
Off ........................ Power management function is off.
52
Downloaded From projector-manual.com EIKI Manuals
Press the SELECT button at
Power management and this
dialog box appears. Use the
Point 7 8 buttons to choose
one of the three options.
Press the Point d button to
select the timer, and then
use the Point 7 8 buttons to
set timer.
Setting
On start
When this function is set to “On,” the projector will be
automatically turned on just by connecting the AC power
cord to a wall outlet.
✔Note:
•Be sure to turn off the projector properly (see “Turning Off the
Projector” on page 23). If the projector is turned off in the incorrect
sequence, the On start function does not work properly.
Lamp control
This function allows you to change brightness of the screen.
Auto ........... The brightness according to the input
signal (between High and Eco mode).
High ........... Brighter than the Normal mode.
Normal ....... Normal brightness
Eco ............. Lower brightness reduces the lamp lower
consumption and extends the lamp life.
Pointer
Pointer
You can emphasize a part of the projected image with this
function. Use the Point ed buttons to choose either
Spotlight or Pointer and press the SELECT button. Then use
the Point 7 8 buttons to select a size of the Spotlight
(Large, Middle, or Small) or a pattern of the Pointer (Arrow,
Finger, or Dot). See “Pointer Function” on page 14.
Remote control
Use the Point ed buttons
to choose either Spotlight
or Pointer, and then use
the Point 7 8 buttons to
switch between the
options.
Remote control
The eight different remote control codes (Code 1–Code 8)
are assigned to the projector; the factory-set, initial code
(Code 1) and the other seven codes (Code 2 to Code 8).
The same code should set on both the projector and the
remote control. For example, operating the projector in
“Code 7”, the remote control code also must be switched
to “Code 7”.
To change the code for the projector
Select a remote control code in this Setting Menu.
To change the code for the remote control:
While holing down the MENU button, press the IMAGE
button the number of times corresponding to the remote
control code for the projector. See “Remote Control
Code” on page 15.
Downloaded From projector-manual.com EIKI Manuals
53
Setting
Security (Key lock, PIN code lock, Alarm settings)
Key lock
This function allows you to use the Key lock, PIN code lock,
and Alarm function to set the security for the projector
operation.
Key lock
This function locks the top control and remote control
buttons to prevent operation by unauthorized persons.
...... Unlocked.
...... Lock the operation of the top control. To
unlock, use the remote control.
...... lock the operation of the remote control.
To unlock, use the top control.
If the top control accidentally becomes locked and you
do not have the remote control nearby or there is
something wrong with your remote control, contact the
dealer where you purchased the projector or the service
center.
PIN code lock
Select Key lock. Use
the Point ed
buttons to choose
one of the options
and select [Yes] to
activate it.
PIN code lock
This function prevents the projector from being operated
by unauthorized persons and provides the following
setting options for security.
Off............ Unlocked.
On1 .......... Enter the PIN code every time turning on
the projector.
On2 .......... Enter the PIN code to operate the projector
once the power cord is disconnected; as
long as the AC power cord is connected,
the projector can be operated without a PIN
code.
Whenever you change the PIN code lock setting or the
PIN code (the four-digit number), you are required to
enter the PIN code. The “1234” is set as the initial PIN
code at the factory.
If you want to change the PIN code lock setting, Press
the SELECT button and the PIN code dialog box appears.
54
Downloaded From projector-manual.com EIKI Manuals
When the projector is locked
with a PIN code, the PIN code
lock symbol appears on the
menu bar.
Setting
Enter a PIN code
Enter a PIN code
Use the Point ed buttons to enter a number. Press the
Point 8 button to fix the number and move the red frame
pointer to the next box. The number changes to “✳.” If
you fixed an incorrect number, use the Point 7 button to
move the pointer to the number you want to correct, and
then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
“Set.” Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect PIN code, “PIN code” and the
number (✳✳✳✳) will turn red for a moment. Enter the
correct PIN code all over again.
After a correct PIN code is
entered, the following dialog
box appears.
Change the PIN code lock setting
Change the PIN code lock setting
Use the Point 7 8 button to select Off, On1, or On2 and
then move the pointer to “Quit” with the Point d button.
Press the SELECT button to close the dialog box.
Change the PIN code
Use the Point 7 8 buttons to
switch between the options.
Change the PIN code
The PIN code can be changed to your desired four-digit
number. Press the Point d buttons to select “PIN code
change” and press the SELECT button. The New PIN
code input dialog box appears. Set a new PIN code.
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE PIN
CODE NO. MEMO ON PAGE 78, AND KEEP IT
SECURELY. IF YOU FORGET YOUR PIN CODE, THE
PROJECTOR CAN NO LONGER BE STARTED.
Alarm
This function allows you to configure the Alarm
operation. See “How to Use the Antitheft Alarm
Function” on pages 58–61.
Downloaded From projector-manual.com EIKI Manuals
55
Setting
Fan
Fan
This function provides the following options in the cooling
fans’ operation when the projector is turned off (p.23).
L1....... Normal operation
L2....... Slower and lower-sound than the normal operation
(L1), but it takes more time to cool the projector
down.
Fan control
Choose the running speed of cooling fans from the following
options.
Normal ..... Normal speed
Max.......... Faster than the normal speed.
Warning log
This function records anomalous operations while the
projector is in operation and use it when diagnosing faults.
Up to 10 warning logs are displayed with the latest warning
message at the top of the list, followed by previous warning
messages in chronological order.
✔Note:
•When the Factory default function is executed, all the warning log
records will be deleted.
Lamp counter
Fig.1 Lamp replacement icon
This function is used to reset the lamp counter.
When the lamp life is left less than 100 hours, the Lamp
replacement icon (Fig.1) will appear on the screen,
indicating that the end of lamp life is approaching.
When the lamp life is left 0 hour, the Lamp replacement
icon (Fig.2) will appear on the screen, indicating that the end
of lamp life is reached.
When replacing the projection lamp, reset the lamp counter.
See “Resetting the Lamp Counter” on page 66.
✔Note:
•The Lamp replacement icons (Fig.1 and Fig.2) will not appear
when the Display function is set to “Off” (p.48), during “Freeze”
(p.28), or “No show” (p.29).
This icon appears on the screen when the end of
lamp life is approaching.
✔Note:
•This icon also appears at turning on and
selecting input source..
Fig.2 Lamp replacement icon
This icon appears on the screen when the end of
lamp life is reached.
✔Note:
•At turning on, the icon (Fig.2) will appear.
At selecting input source, the icon (Fig.1) will
appear.
56
Downloaded From projector-manual.com EIKI Manuals
Setting
Filter counter
Filter counter
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between
cleanings, a Filter warning icon appears on the screen,
notifying the cleaning is necessary. After cleaning the filter,
be sure to select RESET and set the timer. The Filter warning
icon will not turn off until the filter counter is reset.
Use the Point 7 8 buttons
to set the timer. Select
from (Off/100H/ 200H/
300H) depending on the
use environment.
For details about resetting the timer, refer to “Resetting the
Filter Counter” on page 63.
Fig.3 Filter warning icon
Filter warning icon appears on the screen at a set
time.
✔Note:
•This icon also appears at turning on.
Fig.4 Filter warning icon
✔Notes:
•At selecting input source, the icon (Fig.4) will
appear.
•The Filter warning icons (Fig.3 and Fig.4) will not
appear when the Display function is set to “Off”
(p.48), during “Freeze”(p.28), or “No show”
(p.29).
Factory default
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, lamp counter, and
filter counter to the factory default settings.
Quit
Exit the Setting Menu.
Select Factory default and this
box appears. Select [Yes], and
the next box appears.
Select [Yes] to
activate it.
Downloaded From projector-manual.com EIKI Manuals
57
Antitheft Alarm Function
How to Use the Antitheft Alarm Function
Antitheft alarm function is provided to prevent the projector from being stolen. When this function is set to
“On,” the alarm rings as an unauthorized person tries to move the projector.
To activate the Alarm function for the first time after purchase, you must turn on the power once.
✔Notes:
•This function is not a guarantee against stealing.
•The alarm does not ring while the AC power cord is connected to an outlet even if the projector detects vibrations.
•The alarm will stop, as the AC power cord is connected to an outlet, except when the battery cover is open.
•Pressing the buttons is always accompanied by a sound. If no sound is produced after pressing a button, you need to press it again.
The Alarm function is operated by a built-in rechargeable
battery. The alarm will not work properly if the battery is not
charged enough. See page 60 for details.
Set and release the Antitheft alarm function
The Alarm setting and release and PIN Code change can be
made without an AC power connection.
Set the alarm
Top Control
Press the F button three times to turn the alarm function on.
The ALARM indicator blinks for a few seconds and the
projector enters the warning mode. (If the battery is not
charged enough for the alarm function to operate normally, it
bleeps and the Alarm indicator will blink red every 20
seconds.)
During the Antitheft alarm function is on, the projector emits
a low-pitched sound when it detects vibration.
When the projector does not detect vibration for a few
seconds after the sound, it goes back to the warning mode.
When the projector detects more vibrations after the lowpitched sound, the alarm starts ringing.
ALARM indicator
Rear Terminal
The Alarm operating configuration (Battery charge, Alarm
volume, Sensitivity, and Ringing time) can be selected in the
menu. See page 59.
✔Notes:
•You can test the alarm sound without setting the alarm function.
Press and hold the F button, then the alarm starts ringing. The
duration of the alarm sound is the same as the “Ringing Time”
setting (p.59).
•If you want to stop the alarm while it is ringing, insert the AC power
cord to an outlet or press the F button and enter the four-digit PIN
code number.
Release the alarm setting
Press the F button and enter the four-digit PIN code number
within about 10 seconds. (The default PIN code is set to
“1111.”) When the alarm is released, you will hear a highpitched confirmation sound.
When you enter an incorrect PIN code, you will hear a lowpitched sound. If you enter an incorrect PIN code three
times in a row, the alarm will start ringing.
58
Downloaded From projector-manual.com EIKI Manuals
F button Button 1, 2, 3
Antitheft Alarm Function
Other settings
Change the PIN code
1
2
Top Control
Press the F button and enter the four-digit PIN code
number within about 10 seconds. The ALARM indicator
blinks red for a few seconds and a high-pitched
confirmation sound is produced.
ALARM indicator
While the indicator is blinking, enter a new PIN code,
then you will hear a high-pitched confirmation sound
and the ALARM indicator is turned off.
Rear Terminal
When you enter an incorrect PIN code, you will hear a
low-pitched sound. If you enter incorrect PIN code
three times in a row, the alarm will start ringing.
The PIN code for the Antitheft alarm function is a
combination of 1, 2, or 3. Use the buttons 1, 2, and 3 to
enter the PIN code. The default PIN code is “1111.”
Reset the settings
F button Button 1, 2, 3
Select “Factory default” in the Setting menu to reset the
settings for the Antitheft alarm function.
✔Note:
•This is effective only when the Antitheft alarm setting is released.
Alarm
Alarm operating configuration
The Alarm operating configuration can be changed when
the Antitheft alarm function is set to “Off.” See page 58 for
setting or releasing this function.
Press the SELECT button at
the Alarm icon to display the
Alarm setting dialog box.
Press the SELECT button at Alarm icon in the Setting Menu
to display the Alarm setting dialog box. Use the Point ed
buttons to select the desired option; use the Point 7 8
buttons to set the selected option.
Battery charge
See the next page for details.
Alarm volume
Small, Medium, Large
Sensitivity
Low .....................Less sensitive
Medium ..............Normal sensitivity
High ....................Highly sensitive (default)
Ringing time
10 seconds .........Rings about 10 seconds (default).
60 seconds .........Rings about 60 seconds.
Long time ............Rings until the end of the battery life.
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE DOWN
THE NEW PIN CODE AND KEEP IT SECURELY. IF YOU FORGET
YOUR PIN CODE, SOME SETTINGS OF THE ANTITHEFT ALARM
FUNCTION CAN NO LONGER BE CHANGED.
Downloaded From projector-manual.com EIKI Manuals
Use the Point 7 8
buttons to set the
selected option.
✔Notes:
•The Alarm icon appears dimmed and can be
unavailable when the Antitheft alarm function is set
to “On” or if the battery is not installed, discharged,
or coming to the end of its life.
•While the Alarm icon is selected, the Antitheft alarm
setting buttons can be unavailable.
•When selecting “Long time” option in the Ringing
time, the duration of alarm sounding differs
depending on the battery life.
59
Antitheft Alarm Function
Charge the built-in batteries
Set the Battery charge option in the Alarm setting menu to
“Auto.” The default setting is “Auto.”
As long as the AC power cord is connected and this option is
set to “Auto,” the built-in battery for Alarm function is being
charged at all times. While charging the battery, “Charging”
is displayed in the menu.
The “Charging”appears dimmed when the battery is fully
charged or the Battery charge option is set to“Off,” or if
charging malfunction occurs. Set the option to “Off” when
not using the Alarm function. This can save the power and
battery life.
Screw
Remove the screw and
open the battery cover.
Replace the rechargeable batteries
Use only the specified battery for this projector. Using other
types of battery may cause accident or fire hazard.
Replacement Battery: SANYO Ni-MH BATTERY PACK
Part No. 645 089 8587
How to replace the rechargeable batteries
1
Unplug the AC power cord from a wall outlet.
2
Set the Alarm function to “Off” (see page 58). If it is
not released, the alarm will start ringing when you try
to remove the rechargeable battery cover.
3
Remove the screw from the rechargeable battery
cover and open the cover.
4
Pull out the battery connector and remove the battery.
5
Install new battery and plug the connector into the
socket.
Note: The battery connector has polarity. Observe
battery polarity when installing.
6
Put back the battery cover and secure it with the screw.
Caution: Tighten the screw securely. If you fail to do
so, the alarm will not operate. Do not use any
other screws. This may cause damage to the
projector.
✔Note:
•The PIN code and settings you have changed are effective even after
the battery is changed.
60
Downloaded From projector-manual.com EIKI Manuals
Install the battery, then put back the battery
cover and secure it with the screw.
Antitheft Alarm Function
SAFETY PRECAUTIONS FOR Ni-MH BATTERY PACK
Observe the following precautions when handling the built-in battery pack of the projector:
● MAKE SURE THAT THE BATTERY PACK IS INSTALLED IN THE PROJECTOR WHEN RECHARGING.
USING THE CHARGERS OTHER THAN THE PROJECTOR MAY CAUSE EXPLOSION OR A FIRE.
● The rechargeable battery pack is for use exclusively with this projector. Do not use in other products or
this may cause accident.
● Do not throw the battery into fire or heat it. Doing so may cause an explosion or fire.
● Never attempt to disassemble, modify, reconstruct, or solder lead wires directly on to the battery.
● Do not drop or subject to strong forces. Doing so may cause the battery to leak fluid or explode.
● Do not expose to direct sunlight or high temperatures. This may degrade battery performance or cause
leakage.
● Avoid contact with water or liquid. Exposure to water or liquid could result in battery corrosion or
damage.
● Keep out of reach of children. They may accidentally swallow the battery.
● Do not short-circuit battery terminals with metal objects. Do not store with metal objects or in a metal
case.
● The rechargeable battery pack has a limited number of charge cycles and eventually need to be
replaced. If it can no longer be recharged, stop charging immediately and replace it with new one.
● Recharge the battery in a place where the temperature is always between 32˚F to 104˚F (0˚C to 40˚C).
Charging in the temperature out of this range may result in fluid leak, heat generation, or shortening
battery life.
● If you do not use the projector or the Antitheft alarm function for a long period of time, remove the
battery from the projector and store it in a place where the temperature is always between –4˚F to
86˚F (–20˚C to 30˚C).
● If a battery leaks and fluid comes in contact with skin, this may cause skin irritation. Flush the affected
area thoroughly with water.
● If a battery leaks and fluid gets in contact with eyes, wash your eyes with water immediately and seek
medical attention.
● Dispose of used batteries according to your local disposal rule and guidelines.
Downloaded From projector-manual.com EIKI Manuals
61
Maintenance and Cleaning
Warning Indicator
The WARNING indicator shows the state of the function which protects the projector. Check the state of the
WARNING indicator and the POWER indicator to take proper maintenance.
The projector is shut down and the WARNING
indicator is blinking red.
Top Control
When the temperature inside the projector reaches a
certain level, the projector will be automatically shut down
to protect the inside of the projector. The POWER indicator
is blinking while the projector is being cooled down. When
the projector has cooled down enough (to its normal
operating temperature), it can be turned on again by
pressing the ON/STAND-BY button.
WARNING
blinking red
✔Note:
•The WARNING indicator continues to blink even after the
temperature inside the projector returns to normal. When the
projector is turned on again, the WARNING indicator stops
blinking.
Then check the matters below:
– Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if the air
vents of the projector are not blocked.
– Has the projector been installed near an Air-Conditioning/
Heating Duct or Vent? Move the installation of the
projector away from the duct or vent.
– Is the filter clean? Clean the filter periodically.
The projector is shut down and the WARNING
indicator lights red.
When the projector detects an abnormal condition, it is
automatically shut down to protect the inside of the
projector and the WARNING indicator lights red. In this
case, unplug the AC power cord and reconnect it, and then
turn the projector on once again to verify operation. If the
projector cannot be turned on and the WARNING indicator
still lights red, unplug the AC power cord and contact the
service station.
CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE AC
POWER CORD CONNECTED UNDER AN
ABNORMAL CONDITION. IT MAY RESULT IN
FIRE OR ELECTRIC SHOCK.
62
Downloaded From projector-manual.com EIKI Manuals
Top Control
WARNING
lights red
Maintenance and Cleaning
Cleaning the Filter
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and
adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filter
immediately. Clean the filter by following the steps below.
1
Turn off the projector, and unplug the AC power cord
from the AC outlet.
2
Turn the projector over and remove the filter by pulling
the latches upward.
3
Gently clean the filter by using a brush or rinse it
softly.
4
When rinsing the filter, dry it well. Replace the filter
properly. Make sure that the filter is fully inserted to
the projector.
CAUTION
Do not operate the projector with the filter
removed. Dust may accumulate on the optical
elements degrading picture quality.
Do not put anything into the air vents. Doing so
may result in malfunction of the projector.
Filter
Pull up and remove.
✔Note:
•When reinserting this filter, be sure that the slit
part is facing the outer side.
RECOMMENDATION
We recommend avoiding dusty/smoky environments
when you operate the projector. Usage in these
environments may cause poor image quality.
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, LCD panels, or optical
elements inside the projector degrading the quality of a
projected image. When the symptoms above are noticed,
contact your authorized dealer or service station for proper
cleaning.
Resetting the Filter Counter
Be sure to reset the Filter counter after cleaning or replacing the filter.
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Setting Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to Filter counter and then press the SELECT
button. A dialog box appears showing the total
accumulated time of the filter use, a timer setting
option, and the reset option. Select Reset and the
“Filter counter Reset?” appears. Select [Yes] to
continue.
3
Another confirmation dialog box appears, select [Yes]
to reset the Filter counter.
Filter counter
Select Reset and the “Filter
counter Reset?” appears.
Select [Yes],
then another
confirmation
box appears.
Select [Yes] again to reset
the Filter counter.
Downloaded From projector-manual.com EIKI Manuals
63
Maintenance and Cleaning
Slide Shutter
Slide Shutter is provided to protect the surface of the lens
against scratches and dirt. When you are not using the
projector, close the Slide Shutter.
Slide Shutter Lever
To open or close, use the Slide Shutter Lever on the top of
the cabinet.
Do not close the shutter when the projection lamp is on.
Slide Shutter
Cleaning the Projection Lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens cleaner,
or use a lens cleaning paper or commercially available air
blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the lens.
Cleaning the Projector Cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning
cloth. When the cabinet is heavily soiled, use a small
amount of mild detergent and finish with a soft dry cleaning
cloth. Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the cabinet.
When the projector is not in use, put the projector in an
appropriate carrying case to protect it from dust and
scratches.
64
Downloaded From projector-manual.com EIKI Manuals
Maintenance and Cleaning
Lamp Replacement
When the projection lamp of the projector reaches its end of
life, the Lamp replacement icon appears on the screen and
LAMP REPLACE indicator lights yellow. Replace the lamp with
a new one promptly. The timing when the LAMP REPLACE
indicator should light is depending on the lamp mode.
Top Control
LAMP REPLACE
indicator
WARNING:
TURN OFF THE UV LAMP BEFORE
OPENING THE LAMP COVER
Lamp replacement icon
✔Note:
•The Lamp replacement icon will not appear when
the Display function is set to “Off” (p.48), during
“Freeze” (p.28), or “No show” (p.29).
CAUTION
CAUTION
Allow a projector to cool for at least 45 minutes
before you open the Lamp cover. The inside of
the projector can become very hot.
For continued safety, replace with a lamp of the
same type. Do not drop a lamp or touch a glass
bulb! The glass can shatter and may cause injury.
Lamp Cover
Press here and pull upward.
Follow these steps to replace the lamp.
1
Turn off the projector and unplug the AC power cord.
Let the projector cool for at least 45 minutes.
2
Open the lamp cover.
3
Remove the two (2) screws that secure the lamp. Lift
the lamp out of the projector by using the handle.
4
Replace the lamp with a new one and secure the two
(2) screws. Make sure that the lamp is set properly.
Close the lamp cover.
5
Connect the AC power cord to the projector and turn
on the projector.
6
Reset the lamp counter.
See “Resetting the Lamp Counter” on the next page.
Screw
Handle
Screw
Lamp
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following
information to the dealer.
●
Model No. of your projector
● Replacement Lamp Type No.
: LC-XB40N
: POA-LMP103
(Service Parts No. 610 331 6345)
Downloaded From projector-manual.com EIKI Manuals
65
Maintenance and Cleaning
Resetting the Lamp Counter
Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP
REPLACE indicator stops lighting and the Lamp replacement icon disappears.
1
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Setting Menu icon.
2
Use the Point ed buttons to move the red frame
pointer to Lamp counter and then press the SELECT
button. A dialog box appears showing the total
accumulated time of the lamp usage and the reset
option. Select Reset and the “Lamp replacement
counter Reset?” appears. Select [Yes] to continue.
3
Select Reset and the “Lamp
replacement counter
Reset?” appears.
Another confirmation dialog box appears, select [Yes]
to reset the Lamp counter.
Select [Yes],
then another
confirmation
box appears.
✔Note:
•Do not reset the Lamp counter without implementing lamp
replacement. Be sure to reset the Lamp counter only after replacing
the lamp.
Select [Yes] again to reset the
Lamp counter.
LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly.
Improper handling may result in accidents, injury, or create a fire hazard.
● Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee
of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time
than other similar lamps.
● If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
(Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of
the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service station for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who are
familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those who
are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.
66
Downloaded From projector-manual.com EIKI Manuals
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
–Make sure you have properly connected the projector to peripheral equipment as described on pages 19–21.
–Make sure all equipment is connected to AC outlet and the power is turned on.
–When the projector does not project an image from the connected computer, restart the computer.
Problem:
– Solutions
No power
– Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait 90-120 seconds after the projector is turned off when turning
the projector back on. The projector can be turned on after the
POWER indicator turns red. See on page 22.
– Check the WARNING indicator. If the WARNING indicator lights red,
projector cannot be turned on. See on page 62.
– Check the projection lamp. See page 65.
– Unlock the Key lock function for the projector. See page 54.
Image is out of focus.
– Adjust focus of the projector. See page 26.
– Provide proper distance between the projector and the projection
screen. See page 17.
– Check the projection lens to see if it needs cleaning. See page 64.
– Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. In such cases, leave
the projector off and wait until condensation evaporates.
No image
– Check the connection between your computer or video equipment
and the projector. See page 19–21.
– See if the input signal is correctly output from your computer. Some
laptop computers may need to change the setting for monitor output
when connecting to a projector. See your computer’s instruction
manual for the setting.
– It takes about 30 seconds to display an image after turning on the
projector. See page 22.
– See if the selected system is corresponding with your computer or
video equipment. See pages 32, 42.
– Select correct input source once again through menu operation. See
pages 30–31, 40–41.
– Make sure the temperature is not out of the specified Operating
Temperature (41˚F–95˚F [5˚C–35˚C]).
Image is Left/Right reversed.
Image is Top/Bottom reversed.
– Check the Ceiling/Rear function. See page 51.
– Check the Ceiling function. See page 51.
No sound
–
–
–
–
Downloaded From projector-manual.com EIKI Manuals
Check the audio cable connection from audio input source.
Adjust the audio source.
Press the Volume + button. See page 27.
Press the Mute button. See page 27.
67
Appendix
Some displays are not seen
during the operation.
– Check the Display function. See page 48.
PIN code dialog box appears
at start-up.
– PIN code lock is being set. Enter a PIN code (the “1234” or numbers
you have set). See pages 22, 54–55.
The Remote Control does
not work.
– Check the batteries.
– Make sure no obstruction is between the projector and remote
control.
– Make sure you are not too far from the projector when using the
remote control. Maximum operating range is 16.4’ (5 m).
– Make sure the code of the remote control is conformed to the
projector’s code. See page 53.
– Unlock the Key lock function for the remote control function. See
page 54.
WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.
If problems still persist after following all operating instructions, contact the dealer where you purchased the
projector or the service center. Specify the model number and explain about the problem. We will advise you
how to obtain service.
The CE Mark is a Directive
conformity mark of the European
Community (EC).
68
Downloaded From projector-manual.com EIKI Manuals
This symbol on the nameplate means the product
is Listed by Underwriters Laboratories Inc. It is
designed and manufactured to meet rigid U.L.
safety standards against risk of fire, casualty and
electrical hazards.
Appendix
Menu Tree
Computer Input/Video Input
Input
Computer 1 (Analog)
Go to System (1)
Computer 1 (Digital)
Computer 2
Video
RGB (PC digital)
N/A
RGB (AV HDCP)
N/A
RGB
Go to System (1)
Component
Go to System (2)
RGB (Scart)
N/A
Auto
Go to System (3)
Video
Go to System (3)
S-video
Go to System (3)
Quit
Wired
See owner’s manual “Network Setup and Operation.”
Wireless*
See owner’s manual “Network Setup and Operation.”
Memory viewer*
See owner’s manual of Memory viewer (optionally available)
N/A ........not applicable
* ............The menu will be displayed when connecting
device for the input source.
Sound
Sound
Volume
Mute
Quit
0–63
On/Off
Computer Input
System (1)
SVGA 1
Mode 1
Mode 2
----
Image Select
Dynamic
Standard
Real
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Image Adjust
Contrast
Brightness
Color temp.
✽Systems displayed in the System Menu vary
depending on an input signal.
PC Adjust
Auto PC Adj.
Fine sync
Total dots
Horizontal
Vertical
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store
Quit
Downloaded From projector-manual.com EIKI Manuals
0–31
H-sync freq.
V-sync freq.
Quit
Yes/No
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Quit
Red
Green
Blue
Sharpness
Gamma
Reset
Store
0–63
0–63
High
Mid
Low
XLow
Adj.
0–63
0–63
0–63
0–15
0–15
Yes/No
Image 1
Image 2
Image 3
Image 4
Quit
Quit
Screen
Normal
True
Wide
Full screen
Custom
Digital zoom +
Digital zoom –
69
Appendix
Video Input
Setting
System (2)
Auto
1080i
1035i
720p
575p
480p
575i
480i
System (3)
Auto
PAL
SECAM
NTSC
NTSC 4.43
PAL-M
PAL-N
Image Select
Dynamic
Standard
Cinema
Blackboard (Green)
Image 1
Image 2
Image 3
Image 4
Image Adjust
Contrast
Brightness
Color
Tint
Color temp.
Red
Green
Blue
Sharpness
Gamma
Noise reduction
Progressive
Reset
Store
Quit
Screen
70
Normal
Wide
Custom
Downloaded From projector-manual.com EIKI Manuals
Setting
0–63
0–63
0–63
0–63
High
Mid
Low
XLow
Adj.
0–63
0–63
0–63
0–15
0–15
Off
L1
L2
Off
L1
L2
Film
Yes/No
Image 1
Image 2
Image 3
Image 4
Quit
Language
16 languages provided.
Quit
Auto setup
Auto PC adj.
On/Off
Auto keystone
Auto
Manual
Off
Keystone
Store/Reset
Blue back
On/Off
Display
On/Countdown off/Off
Logo
Logo select
Off
Default
User
Capture
Yes/No
Logo PIN code lock
Logo PIN code entry
Off/On
Logo PIN code change
Quit
Quit
Ceiling
On/Off
Rear
On/Off
Standby mode
Eco/Normal
Power management
Off
Ready
Shut down
Timer (1–30 Min.)
Quit
On start
On/Off
Lamp control
Auto/High/Normal/Eco
Pointer
Spotlight/Pointer
Quit
Remote control
Code 1–Code 8
Security
Key lock
Off
Projector
Remote control
Quit
PIN code lock
PIN code lock entry
Off/On1/On2
PIN code change
Quit
Alarm
Off
Off/Auto
Battery charge
Small/Medium/Large
Alarm volume
Low/Medium/High
Sensitivity
10 seconds/
Ringing time
60 seconds/Long time
Quit
On
Quit
Fan
L1/L2
Fan control
Normal/Max
Warning log
Lamp counter
Hour(s)
Reset
Yes/No
Quit
Filter counter
Hour(s)
Off/100H/200H/300H
Reset
Yes/No
Quit
Factory default
Yes/No
Quit
Appendix
Indicators and Projector Condition
Check the indicators for projector condition.
Indicators
POWER
WARNING
LAMP
REPLACE
red/green
red
yellow
Projector Condition
The projector is off. (The AC power cord is unplugged.)
✽
The projector is in stand-by mode. Press the ON/STAND-BY button
to turn on the projector.
✽
The projector is operating normally.
✽
The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled down
enough and the temperature returns to normal, the POWER
indicator stops blinking and the projector can be turned on. (The
WARNING indicator keeps blinking.) Check and clean the filter.
✽
The projector has been cooled down enough and the temperature
returns to normal. When turning on the projector, the WARNING
indicator stops blinking. Check and clean the air filter.
✽
The projector is preparing for stand-by or the projection lamp is
being cooled down. The projector cannot be turned on until cooling
is completed and the POWER indicator stops blinking.
✽
The projector detects an abnormal condition and cannot be turned
on. Unplug the AC power cord and plug it again to turn on the
projector. If the projector is turned off again, unplug the AC power
cord and contact the dealer or the service center for service and
checkup. Do not leave the projector on. It may cause an electric
shock or a fire hazard.
✽
The projector is in the Power management mode.
✽
The projector’s Network or Memory viewer function is in an
abnormal condition.
• • • green.
• • • red
• • • blinks green.
• • • blinks red.
• • • off
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator
lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after
replacing the lamp. See pages 65–66.
Downloaded From projector-manual.com EIKI Manuals
71
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned
below and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal.
When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLAY
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480p
575p
480i
575i
SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9
XGA 10
XGA 11
XGA 12
XGA 13
XGA 14
XGA 15
MAC 19
72
RESOLUTION
640 x 480
720 x 400
640 x 400
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
640 x 480
768 x 575
––––––––
––––––––
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1024 x 768
Downloaded From projector-manual.com EIKI Manuals
H-Freq.
(KHz)
31.47
31.47
31.47
37.86
37.86
37.50
43.269
34.97
35.00
31.47
31.25
15.734
15.625
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
68.677
60.023
56.476
60.31
48.50
44.00
63.48
36.00
62.04
61.00
35.522
46.90
47.00
58.03
60.24
V-Freq.
(Hz)
59.88
70.09
70.09
74.38
72.81
75.00
85.00
66.60
66.67
59.88
50.00
60.00
(Interlace)
50.00
(Interlace)
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60.00
84.997
75.03
70.07
74.92
60.02
54.58
79.35
87.17
(Interlace)
77.07
75.70
86.96
(Interlace)
58.20
58.30
72.00
75.08
ON-SCREEN
DISPLAY
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
SXGA+ 1
SXGA+ 2
SXGA+ 3
MAC21
MAC
MAC
WXGA 1
WXGA 2
WXGA 3
WXGA 4
WXGA 6
WXGA 7
WXGA 8
WXGA 9
UXGA 1
UXGA 2
UXGA 3
UXGA 4
720p
1035i
1080i
1080i
RESOLUTION
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 960
1152 x 900
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1280 x 1024
1152 x 900
1280 x 1024
1280 x 1024
1280 x 1024
1400 x 1050
1400 x 1050
1400 x 1050
1152 x 870
1280 x 960
1280 x 1024
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1600 x 1200
1600 x 1200
1600 x 1200
1600 x 1200
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
H-Freq.
(KHz)
64.20
62.50
63.90
63.34
63.74
71.69
81.13
63.98
79.976
60.00
61.20
71.40
50.00
50.00
63.37
76.97
61.85
46.43
63.79
91.146
63.97
65.35
65.12
68.68
75.00
80.00
48.36
47.70
48.36
56.16
48.36
47.70
48.36
49.600
75.00
81.25
87.5
93.75
45.00
33.75
33.75
28.125
V-Freq.
(Hz)
70.40
58.60
60.00
59.98
60.01
67.19
76.107
60.02
75.025
60.00
65.20
75.60
86.00
(Interlace)
94.00
(Interlace)
60.01
72.00
66.00
86.70
(Interlace)
60.18
85.024
60.19
60.12
59.90
75.06
75.08
75.08
60.00
60.00
60.00
72.00
60.00
60.00
60.00
60.050
60.00
65.00
70.00
75.00
60.00
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
Appendix
When the input signal is digital from DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAY
D-VGA
D-480p
D-575p
D-SVGA
D-XGA
D-WXGA 1
D-WXGA 2
D-WXGA 3
D-WXGA 4
D-WXGA 5
D-WXGA 6
D-WXGA 7
D-WXGA 8
D-WXGA 9
RESOLUTION
640 x 480
640 x 480
768 x 575
800 x 600
1024 x 768
1366 x 768
1360 x 768
1376 x 768
1360 x 768
1366 x 768
1280 x 768
1280 x 768
1280 x 768
1280 x 800
H-Freq.
(KHz)
31.47
31.47
31.25
37.879
43.363
48.36
47.7
48.36
56.160
46.500
47.776
60.289
68.633
49.600
V-Freq.
(Hz)
59.94
59.88
50.00
60.32
60.00
60.00
60.00
60.00
72.000
50.000
59.870
74.893
84.837
60.050
ON-SCREEN
DISPLAY
D-SXGA1
D-SXGA2
D-SXGA+ 1
D-720p
D-1035i
D-1080i
D-1080i
RESOLUTION
1280 x 1024
1280 x 1024
1400 x 1050
1280 x 720
1920 x 1035
1920 x 1080
1920 x 1080
H-Freq.
(KHz)
63.98
60.276
63.97
45.00
33.75
33.75
28.125
V-Freq.
(Hz)
60.02
58.069
60.19
60.00
60.00
(Interlace)
60.00
(Interlace)
50.00
(Interlace)
✔Note:
•When the input signal is D-SXGA 1, D-SXGA 2, or D-SXGA 3, images may not be displayed properly depending on computers.
Downloaded From projector-manual.com EIKI Manuals
73
Appendix
Technical Specifications
Mechanical Information
Projector Type
Dimensions (W x H x D)
Net Weight
Feet Adjustment
Multi-media Projector
13.15” x 3.07” x.9.13” (334 mm x 78 mm x 233 mm) (Not including adjustable feet)
7.7 lbs (3.5 kg)
0˚ to 9.0˚
Panel Resolution
LCD Panel System
Panel Resolution
Number of Pixels
0.8” TFT Active Matrix type, 3 panels
1,024 x 768 dots
2,359,296 (1,024 x 768 x 3 panels)
Signal Compatibility
Color System
High Definition TV Signal
Scanning Frequency
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
H-sync. 15 kHz–100 kHz, V-sync. 50–100 Hz
Optical Information
Projection Image Size (Diagonal)
Throw Distance
Projection Lens
Projection Lamp
Adjustable from 33” to 300”
4.3’–32.8’ (1.3 m–10.0 m)
F1.7–2.1 lens with f26.7 mm–32.0 mm with manual zoom and focus
300 W
Interface
Video Input Jack
S-video Input Jack
Audio Input Jacks
Computer Input 1/DVI-I Input Terminal
Computer Input 2/Component Input Terminal
Monitor Output Terminal
Computer/Component Audio Input Jack
Service Port Connector
USB Connector
Audio Output Jack
LAN Connection Terminal
RCA Type x 1
Mini DIN 4 pin x 1
RCA Type x 2
DVI-I Terminal X 1
Analog RGB (Mini D-sub 15 pin) Terminal x 1
Analog RGB (Mini D-sub 15 pin) Terminal x 1
Mini Jack (stereo) x 1
Mini DIN 8 pin x 1
USB Series A connector x 1/USB Series B connector x 1
Mini Jack (stereo) x 1 (variable)
100 Base-TX (100 Mbps)/10 Base-T (10Mbps), RJ45
Audio
Internal Audio Amp
Built-in Speaker
1.0 W RMS
1 speaker, ø1.1” (28 mm)
Power
Voltage and Power Consumption
AC 100–120 V (4.9A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 200–240 V (2.2A Max. Ampere), 50/60 Hz (Continental Europe)
Operating Environment
Operating Temperature
Storage Temperature
41˚F–95˚F (5 ˚C–35 ˚C)
14˚F–140˚F (-10˚C–60 ˚C)
Remote Control
Battery
Operating Range
Dimensions
Net Weight
AAA or LR03 Type x 2
16.4’ (5 m)/±30˚
1.8” (W) x 1.0” (H) x 5.7” (D) (45 mm x 25 mm x 145 mm)
3.5 oz (99 g) (including batteries)
Laser Pointer
Class II Laser (Max. Output: 1 m W/Wave length: 640–660 nm)
Built-In Battery (Antitheft Alarm)
SANYO Ni-MH BATTERY PACK 3.6V
(Part No. 645 089 8587)
74
Downloaded From projector-manual.com EIKI Manuals
Appendix
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
VGA Cable
PIN Code Label
Alarm Label
Network Application (CD-ROM)
Soft Carrying Case
USB Wireless LAN Adapter
● The specifications are subject to change without notice.
● LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are
effective, a tiny fraction of the pixels (0.01% or less) may be ineffective by the characteristics of the LCD
panels.
Optional Parts
The parts listed below are optionally available. When ordering those parts, specify the item name and Model
No. to the sales dealer.
Model No.
COMPONENT-VGA Cable
: AH-98771
SCART-VGA Cable
: AH-98881
USB Memory
: WL-10
(This is used for Memory viewer operation.)
Downloaded From projector-manual.com EIKI Manuals
75
Appendix
PJ Link Notice
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.”
Projector Input
PJLink Input
Computer1 (Analog)
Parameter
RGB 1
11
RGB (PC digital)
DIGITAL 1
31
RGB (AV HDCP)
DIGITAL 2
32
RGB
RGB 2
12
Component
RGB 3
13
RGB (Scart)
RGB 4
14
Auto
VIDEO 1
21
Video
VIDEO 2
22
S-video
VIDEO 3
23
Wired
NETWORK 1
51
Wireless
NETWORK 2
52
Memory viewer
STORAGE 1
41
Computer1
(Digital)
Computer2
Video
PJLink is a registered trademark of JBMIA and pending trademark in some countries.
76
Downloaded From projector-manual.com EIKI Manuals
Appendix
Configurations of Terminals
COMPUTER IN 2 /COMPONENT IN /MONITOR OUT (ANALOG)
Terminal: Analog RGB (Mini D-sub 15 pin)
4
5
10
15
2
3
9
14
8
13
1
7
12
6
11
1
2
3
4
5
6
7
8
Red (R/Cr) Input/Output
Green (G/Y) Input/Output
Blue (B/Cb) Input/Output
----Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)
C1
C2
C3
C4
C5
Analog Red Input
Analog Green Input
Analog Blue Input
Analog Horiz. sync
Analog Ground (R/G/B)
1
2
3
4
5
6
7
8
T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
Analog Vert. sync
9
10
11
12
13
14
15
5V
Ground (Vert.sync.)
Ground
DDC data
Horiz. sync. Input/Output (Composite H/V sync.)
Vert. sync.
DDC clock
DVI-I TERMINAL (DIGITAL/ANALOG)
C1 C2
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
C3 C4
C5
USB CONNECTOR (Series A)
2
1
3
4
9
10
11
12
13
14
15
16
T.M.D.S. Data1–
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
+5V Power
Ground (for +5V)
Hot Plug Detect
17
18
19
20
21
22
23
24
T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–
USB CONNECTOR (Series B)
1
2
3
4
VCC(5V)
– DATA
+ DATA
Ground
1
2
3
4
TX +
TX –
RX +
-----
2
1
3
4
1
2
3
4
Vcc
- Data
+ Data
Ground
LAN TERMINAL
5
6
7
8
----RX –
---------
87654321
SERVICE PORT CONNECTOR
Terminal : Mini DIN 8-PIN
8
5
7 6
4 3
2 1
1
2
3
4
RXD
--------GND
Downloaded From projector-manual.com EIKI Manuals
5
6
7
8
RTS/CTS
TXD
GND
GND
77
Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or
lost the number and unable to operate the projector, contact the service station.
PIN Code Lock No.
Factory default set No: 1 2 3 4*
Logo PIN Code Lock No.
Factory default set No: 4 3 2 1*
Alarm PIN Code No.
Factory default set No: 1 1 1 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
While the projector is locked with the PIN code....
Put the label below (supplied) on in a prominent place of the
projector’s body while it is locked with a PIN code.
While the Antitheft alarm function is set....
Put the label below (supplied) on in a prominent place of the
projector’s body while the Antitheft alarm function is set.
78
Downloaded From projector-manual.com EIKI Manuals
A-key to better communications
U.S.A.
Canada
EIKI International, Inc.
30251 Esperanza
Rancho Santa Margarita
CA 92688-2132
U.S.A.
Tel : 800-242-3454 (949)-457-0200
Fax : 800-457-3454 (949)-457-7878
E-Mail : usa@eiki.com
EIKI CANADA - Eiki International, Inc.
P.O. Box 156, 310 First St. - Unit 2,
Midland, ON, L4R 4K8, Canada
Tel : 800-563-3454 (705)-527-4084
Fax : 800-567-4069 (705)-527-4087
E-Mail : canada@eiki.com
EIKI Deutschland GmbH
Am Frauwald 12
65510 Idstein
Deutschland
Tel : 06126-9371-0
Fax : 06126-9371-14
E-Mail : info@eiki.de
Eastern Europe
EIKI CZECH spol. s.r.o.
Umelecká 15
170 00 Praha 7
Czech Republic
Tel : +42 02 20570024
+42 02 20571413
Fax : +42 02 20571411
E-Mail : easterneurope@eiki.de
ˆ
Deutschland & Österreich
Japan & Worldwide
EIKI Industrial Company Limited.
4-12 Banzai-Cho, Kita-Ku, Osaka,
530-0028 Japan
Tel : +81-6-6311-9479
Fax : +81-6-6311-8486
WorldWide Website http://www.eiki.com
KM6B
Downloaded From projector-manual.com EIKI Manuals
© 2006 Eiki International, Inc.