VTech Sing n Smile Pals User`s manual

®
LITTLE SMART
Sing 'n Smile Pals™
USER'S MANUAL
™
Pals
Smile
Sing ’n
© VTECH
Printed in China
91-01115-000
Dear Parent:
At VTech® we know that children have the ability to do great
things. That’s why all of our electronic learning products are
uniquely designed to develop a child’s mind and allow them to
learn to the best of their ability. Whether it’s learning about letters,
numbers, geography or algebra, all VTech® learning products
incorporate advanced technologies and extensive curriculum to
encourage children of all ages to reach their potential.
When it comes to providing interactive products that enlighten,
entertain and develop minds, at VTech® we see the potential in
every child.
1
INTRODUCTION
Thank you for purchasing the VTECH® LITTLE SMART Sing ’n Smile
PalsTM learning toy! This product is one of a family of LITTLE SMART®
educational electronic learning products. We at VTECH® are committed
to providing the best possible products to entertain and educate your
child. Should you have any questions or concerns, please call our
Consumer Services Department at 1-800-521-2010 in the U.S., 1-800267-7377 in Canada and 01235-546810 in the UK.
The LITTLE SMART Sing ’n Smile PalsTM learning toy is designed
specifically for infants and toddlers. There are cute animal buttons, lightup number and shape buttons and a fun keyboard.
• Number/Shape Button
• Animal Button
• Speaker
• Melody Roller Ball
• On/Off/Mode
Switch
• Keyboard/Letter key
• Melody Button
2
INCLUDED IN THIS PACKAGE
-
One LITTLE SMART Sing ’n Smile PalsTM learning toy.
-
One instruction manual.
WARNING: All packing materials such as tape, plastic sheets, wire ties
and tags are not part of this toy, and should be discarded for
your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is Off.
2. Locate the battery cover on the back
of the unit. Use a coin or screwdriver
to loosen the screw.
3. Install 2 ‘AA’ (UM-3/LR6) batteries
following the diagram inside the
battery box. (The use of new, alkaline
batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the screw to secure the battery
cover.
3
BATTERY NOTICE
•
Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
•
Always replace a whole set of batteries at one time.
•
Do not use batteries of different types.
•
Remove exhausted or new batteries when unit will not be used for an
extended period of time.
•
Do not dispose of batteries in fire.
•
Do not attempt to recharge ordinary batteries.
•
The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE: If for some reason the program/activity stops working, then please
follow these steps:
1. Please turn the unit off.
2. Interrupt the power supply by removing the batteries or
disconnecting the adaptor.
3. Let the unit stand for a few minutes, then replace the batteries
or reconnect the adaptor.
4. Turn the unit on. The unit will now be ready to play again.
If the problem persists, please call our Consumer Services
Department and a service representative will be happy to help
you.
4
TO BEGIN PLAY
1. Switch the On/Off/Mode Switch to
the Talking position (
) or the
Music position (
) and the LITTLE
SMART Sing ’n Smile PalsTM will play
a short tune and the lights will flash.
2. Press any button to begin play.
3. To adjust the volume, slide the
Volume Switch up for high volume
(
) or down for low volume (
).
The Volume Switch is located on the
bottom of the unit.
4. To turn the unit off, switch the On/Off/
Mode Switch to the off position ( ).
5
ACTIVITIES
Talking Mode
1. Switch the On/Off/Mode Switch to the
) and you will
Talking position (
hear a short tune and the lights will
flash.
2. Press or push an Animal Button. You
will hear the animal identified and it's
sound effect. The lights will flash along
with the sound.
3. Press a Number/Shape Button. You
will hear the color and shape identified.
The lights will flash along with the
voice.
6
4. Press a Keyboard/Letter key. You will
hear the letter identified. The Melody
Button will flash along with the sound.
5. Press the Melody Button. You will
hear one of the four melodies.
Press the Melody Button again and
you will hear a different melody. The
light will flash in time to the music.
There are four melodies:
- London Bridge
- Twinkle Twinkle Little Star
- Three Blind Mice
- Row, Row, Row Your Boat
6. Turn the Melody Roller Ball to control
the speed of a melody and to enhance
baby’s understanding of cause and
effect. The lights will flash along with
the music.
7
Music Mode
1. Switch the On/Off/Mode Switch to the
Music position (
) and you will hear
a short tune and the lights will flash.
2. Press or push an Animal Button. You
will hear the melody being “sung” with
the animal’s sound effect. The lights
will flash in time to the music.
3. Press a Number/Shape Button. You
will hear the number identified. Then
the animal’s sound effect will play the
same number of times as the number
button that was pressed. Also, the light
will flash the same number of times to
reinforce counting.
Press a Number/Shape Button while
a melody is playing. You will hear the
same response without the number
identification.
8
4. Press a Keyboard/Letter key. You will
hear one music note per key. The
Melody Button will flash in time to the
music.
5. Press the Melody Button. You will
hear one of the four melodies. Press
the Melody Button again and you will
hear a different melody. The lights will
flash in time to the music.
6. Turn the Melody Roller Ball to control
the speed of a melody. The lights will
flash along with the melody.
Remember: the faster the ball is
turned, the faster the melody will play.
Likewise, the slower that the ball is
turned, the slower the melody will play.
Melody List:
- London Bridge
- Twinkle Twinkle Little Star
- Three Blind Mice
- Row, Row, Row Your Boat
9
AUTOMATIC SHUT-OFF
To preserve battery life, the LITTLE SMART Sing ’n Smile PalsTM learning
toy will automatically turn off after several minutes without input. The unit
can be turned on again by pressing any button.
CARE AND MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
10
IMPORTANT NOTE
Creating and developing Infant/Toddler products is accompanied by a responsibility that we
at VTECH® take very seriously. We make every effort to ensure the accuracy of the information
which forms the value of our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage you to call our Consumer
Services Department at 1-800-521-2010 in the U. S., 1-800-267-7377 in Canada and 01235546810 in the UK with any problems and/or suggestions that you might have. A service
representative will be happy to help you.
Note:
This equipment generates and uses radio frequency energy and if not installed and used properly,
that is, in strict accordance with the manufacturer’s instructions, it may cause interference to radio
and television reception. It has been type tested and found to comply with the limits for a Class B
computing device in accordance with the specifications in Sub-part J of Part 15 FCC Rules,
which are designed to provide reasonable protection against such interference in a residential
installation. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
reorient the receiving antenna
•
relocate this product with respect to the receiver
•
move this product away from the receiver
11