- Home
- Domestic appliances
- Small kitchen appliances
- Barbecues & grills
- Wolf Appliance Company
- PW542418R
- User manual
Wolf Appliance Company PW542418R Ventilation Hood User manual
Add to My manualsWolf PW542418, a 24-inch wide ventilation hood, offers infinite-speed blower control and heat sentry feature that automatically adjusts fan speed when heat is detected. Halogen lighting with two settings enhances visibility while cooking. The unit is crafted from heavy-duty stainless steel and comes with removable, dishwasher-safe baffle filters for easy cleaning.
advertisement
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 5 4 2 4 1 8 ( R )
Hand finished craftsmanship
Model PW542418
Stainless steel baffle filters
Classic stainless steel finish
Decorative rail
(optional)
Model PW542418R
Rail Option
Location of rating plate
Welded seams and hemmed edges
Halogen lighting Infinite-speed blower control
Model PW542418R shown with decorative rail.
Recessed easyaccess controls
Wolf Pro 24" (610) deep wall hoods are available in the classic stainless steel finish. Rail option hoods (R) come with a classic stainless steel decorative rail and stand-offs. Optional platinum or brass rails match dual fuel range bezels. Pro wall hoods are sold as a shell only; internal, in-line and remote blower options are available.
W olf Pro wall hoods provide the ultimate in ventilation. With standard elements like heat sentry and dual setting halogen lighting, Wolf elevates the need for ventilation to an enjoyable perk.
Pro 24" (610) deep wall hoods are available in the classic stainless steel finish. You also have the option of a decorative rail. While a classic stainless steel rail is standard on (R) models, platinum or brass rails are available to match the bezels of our dual fuel ranges and sealed burner rangetops.
Pro wall ventilation hoods are recommended for use with all Wolf cooking appliances. For optimal performance, a Pro 27" (686) deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle.
Dimensions in parentheses are in millimeters unless otherwise specified.
7/07
1
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 5 4 2 4 1 8 ( R )
F E A T U R E S
54" (1372) wide wall ventilation hood with classic stainless steel finish
Rail option wall hoods (R) come with a classic stainless steel decorative rail and stand-offs—optional platinum or brass rail available to match dual fuel range bezels
Internal, in-line and remote blower options
Heavy-duty 16-gauge brushed stainless steel construction
Stainless steel enclosed liner
Continually welded seams, hemmed edges and sides and hand finished craftsmanship
Recessed easy-access controls
Infinite-speed blower control
Heat sentry feature automatically turns unit on when heat is sensed and automatically adjusts blower speed
Halogen lighting with two settings
Removable, dishwasher-safe, restaurantgrade stainless steel baffle filters
Transition with backdraft damper included
CSA listed to US and Canadian safety standards
Two and five year residential warranty— exclusions apply; warranty information can be found on our website, wolfappliance.com
O V E R A L L D I M E N S I O N S
Model PW542418
54" (1372)
OVERALL WIDTH
54" (1372)
OVERALL WIDTH
Model PW542418R with Rail
Unit dimensions may vary by ±
1
/
8
" (3).
Dimensions in parentheses are in millimeters unless otherwise specified.
12"
(305)
18" (457)
OVERALL
HEIGHT
4" (102)
24" (610)
OVERALL DEPTH
12"
(305)
4" (102)
18" (457)
OVERALL
HEIGHT
3 / 4 " (19)
DIAMETER
OF RAIL
24" (610)
OVERALL DEPTH
2"
(51)
2
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 5 4 2 4 1 8 ( R )
B L O W E R O P T I O N S
1200 CFM Internal Blower
1100 CFM In-Line Blower
900 CFM Remote Blower
1200 CFM Remote Blower
1500 CFM Remote Blower
810316
808332
801641
801642
804701
Refer to Pro Ventilation Recommendations at the end of this section.
A C C E S S O R I E S
Platinum or brass decorative rail and stand-offs
38" (965) high classic stainless steel backsplash with or without warming racks
6" (152), 12" (305), 18" (457) and
24" (610) classic stainless steel duct covers
Horizontal discharge kit
Accessories are available through your
Wolf dealer. To obtain local dealer information, visit the Showroom Locator section of our website, wolfappliance.com.
S P E C I F I C A T I O N S
Overall Width of Hood
Overall Height of Hood
Overall Depth of Hood
(including rail)
Internal Blower Option
In-Line Blower Option
Remote Blower Options
Discharge
Duct Size
Electrical Supply Requirements
54" (1372)
18" (457)
24" (610)
26" (660)
1200 CFM
1100 CFM
900, 1200 or 1500 CFM
Vertical or Horizontal*
10" (254) Round
110 / 120 V AC, 60 Hz
15 amp dedicated circuit
128 lbs (58 kg) Shipping Weight (shell only)
*Horizontal discharge applications require a horizontal discharge kit.
Specifications are subject to change without notice.
Dimensions in parentheses are in millimeters unless otherwise specified.
3
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 5 4 2 4 1 8 ( R )
I N S T A L L A T I O N S P E C I F I C A T I O N S
LOCATION OF
ELECTRICAL
6"
(152)
E
5"
(127)
30" TO 36"
(762 – 914)
TO COUNTERTOP
54" (1372)
WIDTH OF HOOD
18" (457)
HEIGHT
OF HOOD
30" TO 36"
(762 – 914)
TO COUNTERTOP
24" (610)
DEPTH OF HOOD
NOTE: 24" (610) deep wall hoods can be vertical or horizontal discharge.
D I M E N S I O N S
Overall Width of Hood
Overall Height of Hood
Overall Depth of Hood (excluding rail)
Countertop to Bottom of Hood
Location of Electrical
See Installation Instructions shipped with unit for detailed specifications.
54" (1372)
18" (457)
24" (610)
30" (762) to 36" (914)
Within shaded area
Dimensions in parentheses are in millimeters unless otherwise specified.
4
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 5 4 2 4 1 8 ( R )
I N S T A L L A T I O N N O T E S
Refer to the illustrations and specifications for overall dimensions and installation specifics.
Wolf Pro wall ventilation hoods are recommended for use with any Wolf cooking appliance, and should be as least as wide as the cooking surface. It is recommended that the hood overlap the cooking surface by 3" (76) on either side.
IMPORTANT NOTE: For optimal performance, a
Pro 27" (686) deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle.
Installation of all Pro ventilation hoods should be 30" (762) to 36" (914) from the bottom of the hood to the countertop. Follow the dimensions shown in the Installation illustration on page 4.
Wolf Pro wall hoods are shipped without a blower assembly. Internal, in-line or remote blower assemblies are available. Blower options also vary with the volume of air that needs to be moved and the length of the duct run. Refer to the charts at the end of this section for Pro ventilation recommendations and blower options.
IMPORTANT NOTE: Install this ventilation hood only with a Wolf blower.
Pro wall hoods require a separate, grounded
110/120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker.
Placement of the electrical supply is not critical, as long as you provide enough 120 V AC, 60 Hz power cable to make the electrical connection.
Locate electrical within the shaded area shown in the Installation illustration on page 4.
You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.
Refer to the installation instructions shipped with each Wolf product for detailed specifications. This information can also be found on our website, wolfappliance.com.
Dimensions in parentheses are in millimeters unless otherwise specified.
5
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 5 4 2 4 1 8 ( R )
D U C T I N G C O N S I D E R A T I O N S
Wolf Pro 24" (610) deep wall hoods are shipped without the blower assembly. Internal, in-line and remote blower assemblies are available.
IMPORTANT NOTE: Install this ventilation hood only with a Wolf blower.
Pro 24" (610) deep wall hoods have a vertical discharge. A horizontal discharge kit is available as a sales accessory.
The hood will operate most efficiently when ductwork does not exceed 50' (15 m) in length.
Local building codes may require the use of make-up air. Consult your local HVAC professional for specific requirements in your area.
IMPORTANT NOTE: Wolf Pro 24" (610) deep wall hoods must be vented to the outside. Use only metal ductwork.
Refer to the illustration below for ducting considerations for Pro 24" (610) deep wall hoods.
Ducting for Pro 24" (610) deep wall hoods.
DUCTWORK INSTALLATION
THROUGH ROOF
ROOF CAP OR REMOTE BLOWER
10" (254) ROUND DUCT
SOFFIT OR CABINET
OR DUCT COVER
18"
(457)
HEIGHT OF HOOD WALL HOOD
30"
TO
36"
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
24"
(610)
DEPTH OF HOOD
TRANSITION
22 1 / 4 "W x 9"D TO 10" ROUND
10"H (INCLUDING FLANGES)
VERTICAL DISCHARGE
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
NOTE: HORIZONTAL DISCHARGE REQUIRES AN ACCESSORY KIT.
Dimensions in parentheses are in millimeters unless otherwise specified.
6
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 5 4 2 4 1 8 ( R )
W O L F B L O W E R A S S E M B L I E S
A ventilation system must include a blower assembly. Wolf ventilation hoods are shipped without the blower assembly. An internal, in-line or remote blower assembly must be selected to accommodate the cooking appliance, CFM requirements and homeowner preferences.
Internal, in-line and remote blower assemblies are available as sales accessories through your
Wolf dealer.
IMPORTANT NOTE: Use only a Wolf blower with all Wolf ventilation products.
Internal blowers are mounted inside the hood canopy. In-line blowers are mounted in between the hood and the exterior of the home. Remote blowers can be mounted on the roof or in some cases, on an exterior wall. Refer to the illustrations below for dimensions of Wolf in-line and remote blowers.
Pro ventilation recommendation charts on the following page provide minimum CFM recommendations according to the cooking appliance and ventilation hood used and blower options for each specific Pro 24" (610) deep wall hood.
24 3 / 8 "
(619)
11 3 / 4 "
(298)
18
1
/ 2 "
(470)
4 1 / 2 "
(114)
21 1 / 2 "
(546) 12
1
/ 4 "
(311)
In-line BLOWER-60IL
24
7/8
"
(632)
18"
(457)
12"
(305)
22"
(559)
8"
(203)
18"
(457)
In-line BLOWER-110IL
28
1/4
"
(718)
15 1/2 "
(394)
10"
(254)
Diameter
20 3/4 "
(527)
24 1/2 "
(622)
14"
(356)
24 3/4 "
(629)
4 3/4 "
(121)
29 1/2 "
(749)
14 3/4 "
(375)
10" (254)
Diameter
18" (457)
10"
(254)
29 1/2 "
(749)
10 1/8 "
(257)
22"
(559)
7 1/4
"
(184)
Remote BLOWER-60REM and
BLOWER-90REM
Unit dimensions may vary by ±
1
/
8
" (3).
Dimensions in parentheses are in millimeters unless otherwise specified.
Remote BLOWER-120REM
29 1/2 "
(749)
14
3/4
"
(375)
10" (254)
Diameter
21"
(533)
10"
(254)
29 1/2 "
(749)
10 3/8 "
(264)
25"
(635)
7 1/4 "
(184)
Remote BLOWER-150REM
7
Planning Information
Pro 24" (610) Deep Wall Ventilation Hood
M O D E L P W 5 4 2 4 1 8 ( R )
P R O V E N T I L A T I O N C F M R E C O M M E N D A T I O N S
Pro 24" (610) Deep Wall Hoods
Model
DF304 / R304 / SRT304
DF366 / R366 / SRT366 / RT366
PW302418 PW362418 PW422418 PW482418 PW542418 PW602418 PW662418
600 600
900 900
DF364 / R364 / SRT364 / RT364
RT362
R488 / RT488
DF486 / R486 / SRT486 / RT486
DF484 / R484 / SRT484 / RT484
900
900
900
900
1100
1100
1100
1100
1100
1100
DF606 / R606
DF604
1500
1500
1500
1500
Minimum CFM requirements for Wolf ranges and rangetops. CFM recommendations are based on total Btu/hr output.
Additional CFM may be required for long duct runs.
P R O V E N T I L A T I O N B L O W E R O P T I O N S
Pro 24" (610) Deep Wall Hoods
Blower Description
600 CFM Internal
900 CFM Internal
1200 CFM Internal
600 CFM In-Line
1100 CFM In-Line
600 CFM Remote
900 CFM Remote
1200 CFM Remote
1500 CFM Remote
Blower Number
WBLOWER-60INT (810559)
WBLOWER-90INT (811131)
Wall Hood Models
PW302418 / PW362418 / PW422418
PW302418 / PW362418 / PW422418
WBLOWER-120INT (810316) PW482418 / PW542418 / PW602418 / PW662418
BLOWER-60IL (808331) PW302418
BLOWER-110IL (808332)
BLOWER-60REM (801640)
BLOWER-90REM (801641)
BLOWER-120REM (801642)
BLOWER-150REM (804701)
All 24" (610) Deep Wall Hoods
PW302418
PW302418 / PW362418 / PW422418
PW482418 / PW542418
All 24" (610) Deep Wall Hoods
All 24" (610) Deep Wall Hoods
Dimensions in parentheses are in millimeters unless otherwise specified.
8
advertisement
Related manuals
advertisement