Wyrestorm SW-1102 Instruction manual

11 Input to 2 HDMI Output Switcher & Scaler
Part Number
SW-1102
Wyrestorm AV Switcher
Solutions
Instruction Manual
Thank you for choosing this Wyrestorm product.
Please read these instructions carefully before installing to avoid complications later.
1
CONTENTS AND INTRODUCTION
Contents
1
Introduction
2
Features
3
Safety Precautions
4
Packaging Contents
5
Panel Descriptions
I. Front
II. Rear
1.
Introduction
Retrofit installations can be complex and difficult
to manage due to customer requirements for
multiple devices of numerous digital or analog
formats to be connected to HDMI outputs.
Wyrestorm Switchers and Scalers overcome that
problem by providing multi-format plug and play
solutions to get you connected quickly and easily.
The SW-1102 is a multi-function switcher and scaler
that allows the conversion of up to 11 multi-format
inputs to 2 HDMI outputs up to full HD 1080p video
and HD audio.
6
IR Remote
7
On-Screen Menu (OSM)
8
Input/Output Format
Inputs supported include:
9
Connection & Operation
•
•
•
•
•
10 Typical Application
11 Specification
12 IR Extender
13 RS232
14 Maintenance
15 Product Service
16 Mail In Service
17 Warranty
18 Warranty Limits and Exclusions
19 INPUT/OUTPUT installation reference logs
1 x VGA source
1 x S-Video source
2 x AV sources with stereo audio
2 x YPbPr sources with analog audio
4 x HDMI sources (with one supporting 5.1
multichannel digital audio)
• 1 x DVI-I source with analog audio and digital audio
via optical*
The SW-1102 also allows upscaling and switching
from standard definition/high definition sources to
resolutions up to 720p or 1080p, with both outputs
working simultaneously - some VESA formats can be
bypassed by using VGA and DVI-I ports.
The unit also automatically amplifies and equalizes
signals to ensure the optimum HD transmission over
the length of the HDMI cable without any loss in quality
of picture or audio. Whatever the project requirements,
if multiple formats, devices and connectors are an
issue, Wyrestorm Switcher and Scaler products can
provide the perfect “get out of jail” solution.
For further information on this product and other
Wyrestorm ranges, visit our website or download our
latest product guide. www.wyrestorm.com
11 Input to 2 HDMI Output Switcher & Scaler
Part Number
2
SW-1102
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
2.
Features
• Fully 3D compatible – Frame sequential 3D (Blu-ray) and
• 2k resolution supported.
interlaced stereoscopic 3D (satellite broadcasts etc.)
extender sets.
3.
3.
Safety Precautions
Safety Precautions
FEATURES AND SAFETY PRECAUTIONS
• Reads and copies EDID from connected devices with additional
EDID configuration through customisable DIP switch settings if
necessary.
• Supports all high definition resolutions up to and including
SW-1102
1080p and standard video formats.
WARNING
WARNING
reduce
theofrisk
fire, electric
To To
reduce
the risk
fire,ofelectric
shock shock
or or
product
damage:
product
damage:
• RS232
port.
Inputs
supported:
••
•
••
•
•
1
x VGAfrom
source
Choose
6 switching modes – infrared remote control, front
panel
buttons, source
local IR, IR call-back, LAN and RS232.
1
x S-Video
1. Do not expose this apparatus to rain, moisture, sprays,
2
x AVswitching
sourcesremote
with stereo
Simple
controlaudio
included, which can also be
1.
Do not
this apparatus
rain,
dripsexpose
or splashes
and ensuretothat
nomoisture,
objects containing
2
x YPbPr
analog
audio
learned
into asources
universalwith
remote
handset
to allow the control of
sprays,
drips
or
splashes
and
ensure
that
no cups,
liquids
are
placed
on
the
apparatus,
including
4
x HDMI
sources
one supporting 5.1
multiple
devices
from (with
one handset.
glasses
and vases.
objects
containing
liquids
are
placed
on
the
multichannel digital audio)
• Fully compatible for integration with market leading control systems.
apparatus,
including
cups,
vases.
2.
Do not place
this unit
in aglasses
confinedand
space
such as
• 1 x DVI-I source with analog audio and digital audio
• 4
x
IR
3.5mm
mini-jack
ports
for
each
output
to
link
IR
from
enclosed shelving, cabinets or bookshelves. Ensure the
via optical*
2. Do not
this unitventilated.
in a confined space such as
control system to control display
unit place
is adequately
enclosed
shelving,
cabinets
or bookshelves.
*Should
both
analog
and digital
audio
beIRconnected,
• Additional
infrared
extension
port for
longer
connections
3. To prevent the risk of electric shock or fire hazard due to
Ensure the unit is adequately ventilated.
the digital audio has priority. Analog audio from
• HDMI v.1.3
the input is digitized and output to both the HDMI
• Supports 24Bit
depthaudio outs.
connection
and Colour
the digital
• Signalling rate of 6.75 Gbps
overheating, do not cover the unit or obstruct ventilation
openings with material, newspaper, cardboard or
3. To prevent
ofrestrict
electricairflow
shockinto
or the
fire unit.
hazard
anythingthe
thatrisk
may
due to overheating, do not cover the unit or
Do not install near external heat sources such as
obstruct
ventilation openings with material,
radiators, heat registers, boilers or any device that
newspaper, cardboard or anything that may restrict
produces heat such as amplifiers or computers and do
airflow into the unit.
4.
• HDMI outputs also have separate analog audio
• Pack comes complete with 1 x 4x4 Matrix with 19” rack
outputs.
brackets, 4 x 40m IR receivers with mounting brackets, IR
• Allows display to view any source at anytime
not place near sources of naked flame.
receivers, emitters and a Matrix remote control handset.
• Supports bypass function with VGA and DVI-I ports
Unplug
apparatus
from power
during
4. 5.
Do not
install
near external
heat supply
sources
suchlightening
as
features
included
thedigital
RX-1UTP-IR-40
•Additional
DVI-I supports
both
analogon
and
formats with
storms
or
when
unused
for
long
periods
of time.
radiators,
heat
registers,
boilers
or
any
device
that
L/R and one-way
optical audio
input with the HDMI signal over a
• Transmits
signal together
produces
such as
amplifiers
or computers
and
6.
Protectheat
the power
cable
from being
walked on, pinched
• Detached
audiocable.
output by L/R and optical
single Cat5e/6/7
or
restricted
in
any
way,
especially
at
plug
connections.
do
not
place
near
sources
of
naked
flame.
• Delivers uncompressed digital video with zero signal
• Receivers capable of 1080p transmissions up to 40m (131ft)
loss
7. Only use attachments/accessories specified by the
under ideal conditions*
5. Unplug
apparatus from power supply during
manufacturer.
• Supports high definition resolutions 1080p, 1080i,
lightening
storms or when unused for long periods
• For
even
greater
control
and
fine
tuning,
each
receiver
features
720p and standard video formats
8. Units contain non-servicable parts - Refer all servicing to
a
fully
adjustable
EQ
distance
range
for
optimising
the
of
time.
• Scales to 720p or 1080p
qualified service personnel.
transmission signal.
• Can by-pass scaling and output as per source
6. Protect the power cable from being walked on,
• 10-bit triple-ADC for RGB/YPbPr
Technical Support: support@wyrestorm.com US: +866
677 0053
EU: +44
343
4
pinched
or restricted
in (0)
any1793
way,230
especially
at plug
• Dual switching option: IR control with remote
connections.
handset and manual front panel control
• Additional remote control with RS232 connectivity
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all
servicing to qualified service personnel.
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
3
PACkAGE CONTENTS AND PANEL DESCRIPTION
4.
•
•
•
•
•
Package Contents
Main unit. Wyrestorm SW-1102 Switcher & Scaler
5vDC mains power supply
1x remote control handset (Battery type: CR2025 3V).
Product Manual - Printed and digital copies (digital copy also downloadable from website)
IR Extension cable
5i.
Panel Description Front
1
2
4
3
4
5
9
6
7
8
1
LED Source indication - 1-11 inputs - Lit when selected
2
Input selector – turn left or right to scroll through connected sources
3
Power standby
4
Output resolution selection – press to scroll between 720p, 1080p and Bypass
(Bypass option used for VGA and DVI inputs)
5
IR window
6
720p selection indicator (LED lit when selected)*
7
Power standby (LED lit when unit is in standby)
8
1080p selection indicator (LED lit when selected)*
9
Power switch
* Bypass selection indicated by neither LEDs lit
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
Panel Description Rear
7
1
2
3
4
5
6
8
10
9
11
12
13
PANEL DESCRIPTIONS
5ii.
15
14 16
17
1
Composite AV inputs 1 & 2
9
2
Composite AV 1 & 2 stereo audio input (L/R)
10 HDMI Inputs 1-4
3
VGA input
11 HDMI input including 5.1 audio support
4
S-Video input
12 HDMI Output 1 &2
5
Component YPbPr inputs 1 & 2
13 Analog audio output (L/R)
6
Component YPbPr 1 & 2 stereo audio input (L/R)
14 Optical audio output
7
DVI-I input
15 IR Extension
8
Optical audio input
16 5vDC Power Input
Stereo audio (L/R)
17 RS232 Port
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
5
IR REMOTE
6.
IR Remote
1
STANDBY: press to enter and exit standby mode.
2
INFO: view input and output messages from the SW-1102
3
INPUT SOURCE: press for direct selection of specific input source.
4
UP/DOWN: Scroll numerically through inputs.
5
UP/DOWN/LEFT/RIGHT: UP/DOWN to move highlighter bar to desired parameter
in On-Screen Menu (OSM) menu. Press LEFT/RIGHT to increase/decrease setting
value of selected parameters.
6
MENU: Activates OSM (on-screen menu)
7
PC BYPASS: Enters bypass mode (for VGA and DVI inputs)
8
720p: Select to directly output 720p resolution.
9
1080p: Select to directly output 1080p resolution.
1
STANDBY
INFO
2
INPUT SELECT
3
5
6
6
AV1A
V2
AV3
S-VIDEO
YPbPr 1Y
PbPr 2
DVI-I
HDMI 1
HDMI 3
HDMI 4
4
HDMI 2
PC
BYPASS
720P
MENU
1080P
7
8
9
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
ON-SCREEN MENU AND INPUT/OUTPUT FORMAT
7. On-Screen Menu
8.
Input/Output Format
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
7
CONNECTION & OPERATION AND TYPICAL APPLICATION
9.
Connection & Operation 10. Typical Application
1
Connect your multi-format digital or analog AV input
sources to the SW-1102 Switcher and Scaler, ensuring
device format, cables and connectors are supported by
the unit and suitable for the chosen port.
Satellite/Cable
Key:
HDMI
HDMI
Cat5e
Comp
2
Using good quality HDMI cables no longer than
15m/49ft in length, connect the SW-1102 to HDMI output
devices ( such as HD-LCD display or HD-DLP).
3 Power on sources to be used – we recommend
keeping unused inputs switched off so as not to interfere
with normal display.
4 Connect the SW-1102 to the power supply included
and choose your display output.
5
Select sources by using the input selector (turning
left or right) on the front panel or the remote handset.
NOTE VGA and AV2 share the same L/R audio input,
S-video and YPBPR2 share the same L/R audio.
Scart
Yuv
Scart
Vga
Blu-Ray/DVD
VHS
Scart
VHS Player
Comp
Blu-Ray/DVD
Satellite/Cable
SW11-02
HDMI
Additional 3
inputs available
Attention SW-1102 memory - when restarting
the unit, input/output selection will resume as per
previous selection.
Under bypass mode, when switching from VGA or
DVI-I to other inputs, the output will be set to 1080p.
Satellite/Cable
Output will be set to 1080p when powered from
Bypass mode.
Bypass function is for VGA and DVI-I input s only.
Other than VESA, output will be automatically set to
1080p.
HDMI
VGA
Desktop PC
Media Server
YUV
Attention Insert / Extract cables gently.
NOTE SW-1102 accepts AV, SV, VGA, YPBPR, DVI-I
and HDMI inputs.
8
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
Specification
12.
IR Extender Control
SPECIFICATION, IR EXTENDER CONTROL AND RS232 REMOTE CONTROL
11.
Users can use the included IR receiver cable to
change the IR receiver position should IR signals
become obstructed by the location of the unit (such
as positioned in a rack or cupboard).
13.
If controlling the SW-1102 through the 35mm (1/8”)
input jack on the rear panel, connect the IR cable
directly to the IR EXT port.
RS232 Remote Control
Com port setting:
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
9
MAINTENANCE, PRODUCT SERVICES, MAIL-IN-SERVICE AND WARRANTY
14.
Maintenance
Clean this unit with a soft, dry cloth only. Never use
alcohol, paint thinner or other harsh chemicals.
15.
Product Services
Provided Service:
1. Damage requiring service: This unit should be
serviced by a qualified service personnel if:
• The DC power supply or AC adaptor has been
damaged.
• Objects or liquid have gotten into the unit.
• The unit has been exposed to rain.
• The unit does not operate normally or exhibits a marked
change in performance.
• The unit has been dropped or the cabinet damaged.
2. Servicing Personnel: Do not attempt to service
the unit beyond that described in these operating
instructions. Refer all other servicing to authorised
servicing personnel.
3. Replacement Parts: When parts need replacing,
ensure parts approved by the manufacturer are used
– either those specified by the manufacturer or parts
possessing the same characteristics as the original parts.
Be aware – unauthorised substitutes may result in fire,
electric shock, or other hazards and will invalidate your
warranty.
4. Safety Check: After repairs or service, ask the service
personnel to perform safety checks
16.
Mail-in-service
When shipping the unit, carefully pack and send it
prepaid, with adequate insurance and preferably in the
original packaging. Please include a document or letter
detailing the reason for return and include a daytime
telephone number and/or email address where you can
be contacted.
If repair is required during the limited warranty period, the
purchaser will be required to provide a sales receipt or
other proof of purchase, indicating date and location
of purchase as well as the price paid for the product.
The customer will be charged for the repair of any unit
received unless such information is provided.
10
17.
Warranty
Should you feel your product does not function
adequately due to defects in materials or workmanship,
we (referred to as “the warrantor”) will, for the length of
the period indicated below (starting from the original date
of purchase) either:
a) Repair the product with new or refurbished parts.
or
b) Replace it with a new or refurbished product.
Limited warranty period:
All Wyrestorm products are covered by a 2 or 3 year
PARTS and LABOUR warranty. During this period there
will be no charge for unit repair, replacement of unit
components or replacement of product if necessary.
Please check the specific warranty period that applies to
your purchased product with your Wyrestorm dealer.
The decision to repair or replace will be made by the
warrantor. The purchaser must mail-in the product during
the warranty period. This limited warranty only covers the
product purchased as new and is extended to the original
purchaser only. It is non-transferable to subsequent
owners, even during the warranty period.
A purchase receipt or other proof of original purchase
date is required for the limited warranty service.
17.
Warranty Limits and
Exclusions
1. This Limited Warranty ONLY COVERS failures due
to defects in materials or workmanship and DOES
NOT COVER normal wear and tear or cosmetic
damage.
The limited warranty also DOES NOT COVER damage
that occurs in shipment or failures caused by products
not supplied by the warrantor, failures resulting from
accident, misuse, abuse, neglect, mishandling,
misapplication, alteration, incorrect installation, set-up
adjustment, implementation of/to consumer controls,
improper maintenance, power line surge, lightening
damage, modification, service by anyone other than
a manufacturer-approved service centre or factoryauthorised personnel, or damage attributable to acts of
God.
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
MAINTENANCE, PRODUCT SERVICES, MAIL-IN-SERVICE AND WARRANTY
2. There are no express warranties except as listed
under “limited warranty coverage.” The warrantor
is not liable for incidental or consequential damage
resulting from the use of this product or arising out
of any breach of this warranty.
For example: damages for lost time, the cost of having a
person/persons remove or re-install previously installed
equipment, travel to and from service location, loss of or
damage to media, images, data or other recorded/stored
content. The items listed here are not exclusive, but are
for illustration only.
Parts and service not covered by this limited warranty
are not the responsibility of the warrantor and should be
considered the responsibility of the individual.
18.
INPUT/OUTPUT Installation Reference Log
Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343
11
www.wyrestorm.com
WyreStorm Offices
US Office: 6991 Appling Farms Parkway, Suite 104, Memphis, TN 38133
Tel: + 901 384 3575 Fax: + 901 384 3574
Unit 22, Ergo Business Park, Swindon, Wiltshire, SN3 3JW UK
Tel: +44 (0) 1793 230 343 Fax: +44 (0) 1793 230 583
WyreStorm Technical Support
US: +86 6677 0053
UK:- +44 (0) 1793 238 338
Email: support@wyrestorm.com
We reserve the right to change specification or product dimensions at any time.
12