.in.ua
www.commax.in.ua
VIDEO
DOOR PHONE
Model No. CDV- 50AM
Thank you for purchasing our COMMAX product.
Please carefully read this User’s Guide (in particular, precautions for safety)
before using the product and follow the instructions to use your productexactly.
The company is not responsible for any safety accidents caused in abnormal
operation of the product.
Warnings and caution
2
Table of Contents
4
Features
5
Entrance Image Saving & Setup
6
1. Entrance Image Saving
6
2. Review Function Setup
6
2-1 Review-7
7
2-2 Delete All Image
7
2-3 Auto Record Setting
8
2-4 Time Setting
8
2-5 Cam Setting
8
Installation & Final Instructions
9
Parts List
10
Specifications
11
1
Make sure to follow the instructions to prevent any danger or property losses.
It indicates prohibition.
Warning
2
It indicates prohibition of disassembly.
Death or serious
injury is expected.
It indicates prohibition of contact.
It indicates prohibition.
Caution
It indicates prohibition of disassembly.
An injury or property
losses are expected
It indicates prohibition of contact.
It indicates dos and don’ts.
It indicates dos and don’ts.
It indicates that the plug should be pulled out from the socket.
It indicates that the plug should be pulled out from the socket.
Do not put the plug in the socket
simultaneously.
It may generate abnormal heat
or cause a fire.
Do not connect to other products
while in use.
It may cause breakdown.
Do not forcibly bend the cord or
put a heavy object on the
product.
It may cause a fire.
If the socket holes are larger
than normal, do not put the
plug.
It may cause an electric shock
or a fire.
Make sure that dust or foreign
substances are not gathered
on the product.
Make sure to prevent foreign
substances from entering the
product.
It may cause a breakdown.
Do not use water, thinner or a
detergent used to wash oil products
when you wash the exterior.
Make sure to wash it by using a dry cloth to
prevent any breakdown or electric shock.
Do not install the product in a
humid place.
It may cause an electric shock or
a fire.
Do not forcibly pull out the
cord from the socket.
If the cord is damaged, it may
cause a fire or an electric shock.
Do not put a heavy object on
the product.
It may cause a breakdown.
Do not disassemble or give an
impact to the product.
Avoid direct rays of the sun or
heating devices at a time of
installation.
Do not put the plug in the
socket with a wet hand.
It may cause an electric shock.
Do not disassemble, repair or
modify the product.
It may cause a fire, an electric shock
or an injury due to malfunction of the
product.
Do not use AC circuit breaker.
It may cause an electric shock.
Install the product in a flat and
stable place.
Otherwise, it may not function
properly.
Pull the plug if the product is
not used for a long time.
If the product generates strange
sound, make sure to pull the
plug immediately and contact
Commax service center.
3
* Volume control dial for conversation: Allows user to control incoming voice to handset.
* Ring Volume Adjust dial: Allows user to adjust the volume of the ring tone
* Brightness Adjust dial: Allows user to adjust the brightness of the screen
* Contrast control dial: Allows user to contrast the screen.
* Hue control dial: Allows user to adjust the hue of the screen
Product Operating Methods
Visitor Calls
1. A call from a visitor is established when the “ Call Button
”
door camera is pressed. The chime sound will then ring from the monitor,
and the image of the visitor will be displayed on the screen.
2. Once the visitor is displayed on the monitor, pressing the “
”Button will allow
conversation with the visitor. (Maximum conversation duration is 90 seconds)
3. Press the “
” Button again to end the conversation and the monitor screen will
return to standby mode.
4. Pressing the “
”Button will release the door for the visitor.
Interphone Calls
1. Pressing the Interphone Button on the monitor will make a call to the interphone unit.
When a call is being made from the interphone unit, pressing the Call Button will
receive the call.
2. When making a call from the interphone unit to CDV-50AM, a Beep will sound.
3. During conversation between the monitor and interphone units, and a call arrives
from another visitor from the door camera unit, it is possible for 3-way conversation
between the monitor, interphone and door camera units.
Monitoring
No. Function
No. Function
No. Function
1. Pressing the “
13 Power Switch
the image of the according door camera unit that has been connected
with the monitor. The camera view will be displayed for an interval of one minute.
2. If 2 door cameras have been connected with the monitor, pressing
the Monitor Button on the monitor repeatedly will toggle between the views of
both door camera units displayed on the monitor screen.
1 Status LED
7 Door Open Button
2 MIC
8 Volume control dial for conversation 14 Speaker
3 Monitoring(REC) Button
9 Ring Volume Adjust dial
15 Camera Connection Terminal
4 Interphone Call Button
10 Brightness Adjust dial
16 Power Cord
5 Call Button
11 Contrast control
17 N/A
”Button on the monitor will display
6 Priority Call/(MENU) Button 12 Hue control dial
4
5
2-1 Review
Priority Calling
When there is impeding noise that disturbs conversation from the door camera,
pressing and holding the “PTT” button will deliver only the voice of the speaker from
the CDV-50AM to the door camera unit to help clarify speech.
While in review mode, the screen will show the image of the camera as displayed
in the example below. At this time, the buttons/options on the right side of the screen
will appear.
Hide
Prev
1. Entrance Image Saving
While in monitoring mode, holding the “Monitor Button (REC)” for 2 seconds will
display the words “Record” on the top left of the screen. At this time, 1 image cut of
the entrance screen will be taken.
DEL
2. Review Function Setup
While in standby mode, pressing and holding the “PTT Button” for 2 seconds will
display the menu screen as shown in the picture below.
2007-08-14
11: 12 : 33
1/128
A
Picture 2. Review
Menu
B
Review
Exit
A
Prev
Delete All Images
Auto Record Setting
Note :
If no image has been saved, then the “No Image” message will be appear.
Note :
The five functions listed under “A” correspond to the product’ s buttons positioned
on the monitor. (i.e. “Hide”
“Monitoring Button”, “Prev”
Interphone Button”,
and the “UP arrow key”
the “Call Button”, etc.)
SEL
Time Setting
2-2 Delete All Image
Cam Setting
The “Delete All Image” option will erase all saved images.
Exit
Picture 1. Main menu
The picture seen above shows the main menu used to access and setup image memory.
Note :
The five functions listed under “A” correspond to the product’ s buttons positioned
on the monitor. (i.e. “Exit”
“Monitoring Button”, “Prev”
“Interphone Button”,
and the “UP arrow key”
the “Call Button”, etc.)
Delete All Images?
Prev
A
YES
SEL
NO
The five menu options are under “B” navigated by functions under “A”
Picture 3 Delete Image
6
7
Note : When deleting all images, the screen shown in Picture 3 will appear
to confirm erasing all images.
2-5 Cam Setting
This is to set which camera is to activate.
2-3 Auto Record Setting
This is to set “auto record” mode to take a visitor’ s image when the user is away.
Exit
Cam Setting
Prev
Exit
Auto Record Setting
CAM1 - CAM2
Prev
CAM1
SEL
CAM2
YES
SEL
NO
Picture 6 Cam Setting
i.e.) As shown in Picture 6 above, if CAM 1 is selected, calls cannot be received
from CAM 2 and monitoring cannot occur as well.
Picture 4 Auto record setting
Note : Setting the Auto Record function visitor will program the monitor to take
1 image cut of a visitor, whenever there is a call from the entrance unit.
A maximum of 128cuts can be recorded. If more than 128 cuts are taken,
then the cut(1/128) will be deleted sequentilly
1. Monitor Installation
2-4 Time Setting
This is to set the current date and time.
A
Year :
2007
Month :
08
Day :
09
Hour :
14
Minute :
37
2. Standard Height of Monitor
Exit
Prev
SEL
Picture 5 Time Setting
8
9
* Wiring & Terminal Configuration
Model
CDV-50AM
Spec.
Wiring
CAMERA 4-wires, INTERPHONE 4-wires
Power Voltage
AC 100-240V 50/60Hz (FREE VOLTAGE)
Power Consumption
CDV-50A
Image Recording
Call Method
Equipment Specs
Call sound
Image Duration
Call Distance
10
Maximum : 20W, Standby : 7W
128Cut
HANDS FREE Calling (Voice Switch circuit)
5” COLOR TFT-LCD
Electric chime : So, Mi, Do (twice)
Interphone : “Beep”
Standby : 60 sec, Call: 90 sec
Entrance : 50m (0.65mm)
Interphone : 20m (0.65mm)
11
a513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133
Web site : www.commax.com
Printed In Korea/ 2007.11