Motherboard
P7H55D-M
EVO
E5325
Second Edition (V2)
January 2010
Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product may contain copyrighted software that is licensed under the General Public License (“GPL”)
and under the Lesser General Public License Version (“LGPL”). The GPL and LGPL licensed code in this
product is distributed without any warranty. Copies of these licenses are included in this product.
You may obtain the complete corresponding source code (as defined in the GPL) for the GPL Software,
and/or the complete corresponding source code of the LGPL Software (with the complete machinereadable “work that uses the Library”) for a period of three years after our last shipment of the product
including the GPL Software and/or LGPL Software, which will be no earlier than December 1, 2011, either
(1) for free by downloading it from http://support.asus.com/download;
or
(2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the
product for which you wish to obtain the corresponding source code and your contact details so that we
can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as
the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source code
we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the
product and describing the problem (please do NOT send large attachments such as source code archives
etc to this email address).
ii
Contents
Contents....................................................................................................................... iii
Notices....................................................................................................................... vii
Safety information..................................................................................................... viii
About this guide.......................................................................................................... ix
P7H55D-M EVO specifications summary.................................................................. xi
Chapter 1:
1.1
1.2
1.3
Package contents....................................................................................... 1-1
Special features.......................................................................................... 1-2
1.3.1
Product highlights........................................................................ 1-2
1.3.3
ASUS Xtreme Phase................................................................... 1-3
1.3.2
1.3.4
1.3.5
1.3.6
Chapter 2:
2.1
2.2
ASUS Quiet Thermal Solutions.................................................... 1-4
ASUS EZ DIY............................................................................... 1-4
Hardware information
Motherboard overview................................................................................ 2-2
Motherboard layout...................................................................... 2-2
2.2.3
Placement direction..................................................................... 2-4
2.2.4
Layout contents............................................................................ 2-3
Screw holes................................................................................. 2-4
Central Processing Unit (CPU).................................................................. 2-5
2.3.1
Installing the CPU........................................................................ 2-5
2.3.3
Uninstalling the CPU heatsink and fan........................................ 2-9
Installing the CPU heatsink and fan............................................. 2-8
System memory........................................................................................ 2-10
2.4.1
Overview.................................................................................... 2-10
2.4.3
Installing a DIMM....................................................................... 2-23
2.4.2
2.5
ASUS Exclusive Features............................................................ 1-3
2.2.1
2.3.2
2.4
ASUS Exclusive Overclocking Features...................................... 1-3
Before you proceed.................................................................................... 2-1
2.2.2
2.3
Product introduction
Welcome!..................................................................................................... 1-1
2.4.4
Memory configurations............................................................... 2-11
Removing a DIMM..................................................................... 2-23
Expansion slots........................................................................................ 2-24
2.5.1
Installing an expansion card...................................................... 2-24
2.5.3
Interrupt assignments................................................................ 2-25
2.5.2
2.5.4
2.5.5
2.5.6
Configuring an expansion card.................................................. 2-24
PCI slot...................................................................................... 2-26
PCI Express 2.0 x1 slots............................................................ 2-26
PCI Express 2.0 x16 slot............................................................ 2-26
iii
Contents
2.6
2.7
2.8
Jumper....................................................................................................... 2-27
Onboard switch......................................................................................... 2-28
Connectors................................................................................................ 2-29
2.8.1
Rear panel connectors............................................................... 2-29
2.8.3
Internal connectors.................................................................... 2-34
2.8.2
2.9
2.10
2.11
2.8.4.
3.2
Starting up for the first time..................................................................... 2-44
Turning off the computer.......................................................................... 2-44
Updating BIOS............................................................................................. 3-1
3.2.1
ASUS Update utility..................................................................... 3-2
3.2.3
ASUS CrashFree BIOS 3 utility................................................... 3-5
3.2.4
BIOS menu screen....................................................................... 3-9
3.3.3
Navigation keys.......................................................................... 3-10
3.3.5
3.3.6
3.3.7
3.3.8
3.3.9
Menu bar...................................................................................... 3-9
Menu items................................................................................ 3-10
Submenu items.......................................................................... 3-10
Configuration fields.................................................................... 3-10
Pop-up window.......................................................................... 3-10
Scroll bar.................................................................................... 3-10
General help.............................................................................. 3-10
Main menu................................................................................................. 3-11
3.4.1
SATA 1–6................................................................................... 3-11
3.4.3
AHCI Configuration.................................................................... 3-14
3.4.2
3.4.4
Storage Configuration................................................................ 3-13
System Information.................................................................... 3-14
Ai Tweaker menu....................................................................................... 3-15
3.5.1
Ai Overclock Tuner..................................................................... 3-15
3.5.3
Intel(R) SpeedStep(TM) Tech.................................................... 3-16
3.5.2
3.5.4
iv
ASUS BIOS Updater.................................................................... 3-6
3.3.1
3.3.4
3.5
ASUS EZ Flash 2 utility................................................................ 3-4
BIOS setup program................................................................................... 3-9
3.3.2
3.4
BIOS setup
Knowing BIOS............................................................................................. 3-1
3.2.2
3.3
ASUS Q-Connector (system panel)........................................... 2-42
Onboard LEDs........................................................................................... 2-43
Chapter 3:
3.1
Audio I/O connections................................................................ 2-32
CPU Ratio Setting...................................................................... 3-16
Intel(R) TurboMode Tech............................................................ 3-16
Contents
3.5.5
BCLK Frequency........................................................................ 3-17
3.5.8
DRAM Frequency...................................................................... 3-17
3.5.7
3.5.9
3.5.10
3.5.11
3.5.12
3.5.13
3.5.14
3.5.15
3.5.16
3.5.17
3.5.18
3.5.19
3.5.20
3.6
3.5.21
DRAM Timing Control................................................................ 3-17
CPU Differential Amplitude......................................................... 3-19
CPU Clock Skew........................................................................ 3-19
CPU Voltage Mode ................................................................... 3-19
IMC Voltage .............................................................................. 3-19
DRAM Voltage........................................................................... 3-19
CPU PLL Voltage....................................................................... 3-20
PCH Voltage.............................................................................. 3-20
iGPU Voltage............................................................................. 3-20
Load-Line Calibration................................................................. 3-20
CPU Spread Spectrum.............................................................. 3-20
PCIE Spread Spectrum.............................................................. 3-20
CPU Configuration..................................................................... 3-21
3.6.3
Onboard Devices Configuration................................................. 3-25
3.6.5
3.6.6
Uncore Configuration................................................................. 3-23
USB Configuration..................................................................... 3-26
PCIPnP...................................................................................... 3-27
Intel VT-d.................................................................................... 3-27
Power menu............................................................................................... 3-28
3.7.1
Suspend Mode........................................................................... 3-28
3.7.3
ACPI 2.0 Support....................................................................... 3-28
3.7.2
3.7.4
3.7.5
3.7.6
3.7.7
Repost Video on S3 Resume..................................................... 3-28
ACPI APIC Support.................................................................... 3-28
EuP Ready................................................................................. 3-28
APM Configuration..................................................................... 3-29
Hardware Monitor...................................................................... 3-30
Boot menu................................................................................................. 3-32
3.8.1
Boot Device Priority................................................................... 3-32
3.8.3
Security...................................................................................... 3-34
3.8.2
3.9
QPI Frequency........................................................................... 3-17
3.6.1
3.6.4
3.8
PCIE Frequency......................................................................... 3-17
Advanced menu........................................................................................ 3-21
3.6.2
3.7
Xtreme Phase Full Power Mode................................................ 3-17
3.5.6
Boot Settings Configuration....................................................... 3-33
Tools menu................................................................................................ 3-36
3.9.1
ASUS O.C. Profile...................................................................... 3-36
Contents
3.9.2
3.9.3
3.10
3.9.4
4.2
4.3
Express Gate............................................................................. 3-38
Software support
Installing an operating system.................................................................. 4-1
Support DVD information........................................................................... 4-1
4.2.1
4.2.2
Running the support DVD............................................................ 4-1
Obtaining the software manuals.................................................. 4-2
Software information.................................................................................. 4-3
4.3.1
ASUS PC Probe II........................................................................ 4-3
4.3.3
ASUS Fan Xpert.......................................................................... 4-5
4.3.2 4.3.4
4.3.5
4.3.6
4.3.7
4.3.8
4.3.9
vi
ASUS EZ Flash 2....................................................................... 3-38
Exit menu................................................................................................... 3-39
Chapter 4:
4.1
AI NET 2..................................................................................... 3-37
ASUS AI Suite.............................................................................. 4-4
ASUS TurboV............................................................................... 4-6
ASUS GPU Boost........................................................................ 4-7
ASUS Turbo Key.......................................................................... 4-8
ASUS EPU................................................................................... 4-9
ASUS Express Gate.................................................................. 4-10
Audio configurations.................................................................. 4-11
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with manufacturer’s instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
•
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is required
to assure compliance with FCC regulations. Changes or modifications to this unit not
expressly approved by the party responsible for compliance could void the user’s authority
to operate this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
This class B digital apparatus complies with Canadian ICES-003.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of
Chemicals) regulatory framework, we published the chemical substances in our products at
ASUS REACH website at http://green.asus.com/english/REACH.htm.
DO NOT throw the motherboard in municipal waste. This product has been designed to
enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin
indicates that the product (electrical and electronic equipment) should not be placed in
municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol
of the crossed out wheeled bin indicates that the battery should not be placed in municipal
waste.
vii
Safety information
Electrical safety
•
•
•
•
•
•
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables
for the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not sure
about the voltage of the electrical outlet you are using, contact your local power company.
If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
Operation safety
•
•
•
•
•
•
viii
Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
Before using the product, ensure all cables are correctly connected and the power
cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualified service
technician or your retailer.
About this guide
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it
supports.
•
Chapter 2: Hardware information
•
Chapter 3: BIOS setup
•
Chapter 4: Software support
This chapter lists the hardware setup procedures that you have to perform when
installing system components. It includes description of the switches, jumpers, and
connectors on the motherboard.
This chapter tells how to change system settings through the BIOS Setup menus.
Detailed descriptions of the BIOS parameters are also provided.
This chapter describes the contents of the support DVD that comes with the
motherboard package and the software.
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1.
2.
ASUS websites
The ASUS website provides updated information on ASUS hardware and software
products. Refer to the ASUS contact information.
Optional documentation
Your product package may include optional documentation, such as warranty flyers,
that may have been added by your dealer. These documents are not part of the
standard package.
ix
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task.
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text
Indicates a menu or an item to select.
Italics
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key names are linked with a plus sign (+).
Example: <Ctrl> + <Alt> + <Del>
P7H55D-M EVO specifications summary
CPU
LGA1156 socket for Intel® Core™ i7 / Core™ i5 / Core™ i3 Pentium® Processors
Supports Intel® Turbo Boost Technology*
* The Intel® Turbo Boost Technology support depends on the CPU
types.
** Refer to www.asus.com for Intel CPU support list
Chipset
Intel® H55 Express Chipset
Memory
4 x DIMM, max. 16GB, DDR3 2133(O.C.)* / 1333 / 1066 MHz,
non-ECC, un-buffered memory
Dual channel memory architecture
Supports Intel® Extreme Memory Profile (XMP)
* Hyper DIMM support is subject to the physical characteristics of
individual CPUs. Some hyper DIMMs only support one DIMM
per channel. Refer to the Memory QVL for details.
** Refer to www.asus.com or this user manual for the Memory
QVL (Qualified Vendors Lists)
Expansion slots
1 x PCI Express 2.0 x16 slots
2 x PCI Express 2.0 x1 slots (2.5GT/s; gray slots)
1 x PCI slot
VGA
Multi-VGA output support: HDMI, DVI-D, and RGB ports
Supports HDMI with max. resolution 1920 x 1200 @60Hz
Supports DVI with max. resolution 1920 x 1200 @60Hz
Supports RGB with max. resolution 2048 x 1536 @75Hz
Maximum shared memory of 1748MB
Storage
Intel® H55 Express Chipset
- 6 x SATA 3.0 Gb/s ports
Marvell® 88SE6111 SATA & PATA controller
- 1 x Ultra DMA 133/100/66 for up to 2 PATA devices
- 1 x External SATA 3.0 Gb/s port (SATA on-the-go)
LAN
Realtek® 8112L Gigabit LAN controller featuring AI NET2
USB
NEC USB 3.0 controller
- 2 x USB 3.0 ports (blue, at back panel)
Intel® H55 Express Chipset
- 10 x USB 2.0 ports (6 ports at mid-board, 4 ports at back panel)
IEEE 1394
VIA® VT6315N controller supports 2 x IEEE 1394a ports (one at midboard, one at back panel)
Audio
Realtek® 8-channel High Definition Audio CODEC
- BD Audio Layer Content Protection
- Supports Jack-Detection, Multi-streaming, and Front Panel Jack-Retasking
- Optical S/PDIF out port at back I/O
- ASUS Noise Filter
(continued on the next page)
xi
P7H55D-M EVO specifications summary
ASUS unique features
ASUS Exclusive Overclocking Features
- TurboV
- Turbo Key
- GPU Boost
ASUS Xtreme Design
ASUS Xtreme Phase
- 8+3 Phase Power Design
ASUS Exclusive Features
- Express Gate
- MemOK!
- ASUS EPU
ASUS Quiet Thermal Solutions
- ASUS Fanless Design: Stack Cool 3
- ASUS Fan Xpert
ASUS EZ DIY
- ASUS Q-DIMM
- ASUS Q-Connector
- ASUS O.C. Profile
- ASUS CrashFree BIOS 3
- ASUS EZ Flash 2
- ASUS MyLogo 2™
- Multi-language BIOS
ASUS exclusive
overclocking features
Precision Tweaker 2
- vCore: Adjustable CPU voltage at 0.00625V increment
- vIMC: Adjustable IMC voltage at 0.02V increment
- vDRAM Bus: Adjustable DRAM voltage at 0.02V increment
- vPCH: Adjustable PCH voltage at 0.01V increment
- vCPU_PLL: Adjustable CPU_PLL voltage at 0.02V increment
- iGPU: Adjustable iGPU voltage at 0.0125V increment
SFS (Stepless Frequency Selection)
- Internal Base Clock tuning from 80MHz up to 500MHz at
1MHz increment
- PCI Express frequency tuning from 100MHz up to 200MHz
at 1MHz increment
Overclocking protection
- ASUS C.P.R. (CPU Parameter Recall)
(continued on the next page)
xii
P7H55D-M EVO specifications summary
Back panel I/O ports
1 x PS/2 keyboard port (purple)
1 x Optical S/PDIF Out port
1 x External SATA port
1 x HDMI out port
1 x DVI-D out port
1 x D-Sub out port
1 x IEEE 1394a port
1 x LAN (RJ-45) port
2 x USB 3.0/2.0 ports (blue)
4 x USB 2.0/1.1 ports
8-channel Audio I/O ports
Internal I/O connectors
3 x USB connectors support additional 6 USB ports
1 x IDE connector
6 x SATA 3.0 Gb/s connectors
1 x CPU Fan connector
1 x Chassis Fan connectors (1 x 4-pin)
1 x Power Fan connector
1 x IEEE1394a connector
1 x COM connector
1 x Clear CMOS jumper
1 x S/PDIF Out header
1 x MemOK! button
Front panel audio connector
24-pin ATX Power connector
8-pin EATX 12V Power connector
System Panel (Q-Connector)
BIOS features
64 Mb Flash ROM, SPI, AMI BIOS, PnP, DMI 2.0, WfM 2.0,
SM BIOS 2.5, ACPI 2.0a, Multi-language BIOS,
ASUS EZ Flash 2, ASUS CrashFree BIOS 3
Manageability
WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE
Support DVD contents
Drivers
ASUS Utilities
ASUS Update
Anti-virus software (OEM version)
Form factor
uATX form factor: 9.6 in. x 9.6 in. (24.5 cm x 24.5 cm)
*Specifications are subject to change without notice.
xiii
xiv
Chapter 1
Chapter 1:
Product introduction
1.1
Welcome!
Thank you for buying an ASUS® P7H55D-M EVO motherboard!
Chapter 1
The motherboard delivers a host of new features and latest technologies, making it another
standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it, check the items in
your package with the list below.
1.2
Package contents
Check your motherboard package for the following items.
ASUS P7H55D-M EVO motherboard
1 x Ultra DMA 133/100/66 cable
nual
User Ma
User guide
Support DVD
1 x 2-in-1 ASUS Q-Connector kit
1 x ASUS I/O Shield
2 x Serial ATA 3.0 Gb/s cables
•
If any of the above items is damaged or missing, contact your retailer.
•
The illustrated items above are for reference only. Actual product specifications may
vary with different models.
ASUS P7H55D-M EVO
1-1
1.3
Special features
1.3.1
Product highlights
Chapter 1
Intel® LGA1156 Lynnfield / Clarkdale Processor Ready
This motherboard supports the latest Intel® Lynnfield / Clarkdale processors in LGA1156
package, which has memory and PCI Express controller integrated to support 2-channel
(4 DIMMs) DDR3 memory and 16 PCI Express 2.0 lanes, enabling higher graphics
performance. Moreover, Intel® Clarkdale integrated Graphics Processing Unit (GPU)
processors which goes with Intel® H55 chipset with VGA out can bring you to the whole new
experience of the next generation VGA performance. It also provides separated 3D, 2D and
Video Engines to execute different graphic control in hardware. Refer to page 2-5 for details.
Intel® H55
The Intel® H55 Express Chipset is the latest one-chipset design to support the latest 1156
socket Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® processors. Intel® H55 chipset
provides improved performance by utilizing serial point-to-point links, allowing increased
bandwidth and stability. Using Intel® Core™ i5 6 Series, Core™ i3 5 Series, and Pentium®
CPU with H55 Express Chipset to enjoy the latest Intel integrated graphic performance!
Dual-Channel DDR3 2133(O.C.) / 1333 / 1066 support
The motherboard supports DDR3 memory that features data transfer rates of 2133(O.C.) /
1333 / 1066 MHz to meet the higher bandwidth requirements of the latest 3D graphics,
multimedia, and Internet applications. The dual-channel DDR3 architecture enlarges the
bandwidth of your system memory to boost system performance. Refer to page 2-10 for
details.
True USB 3.0 Support
Experience ultra-fast data transfers at 4.8 Gb/s with USB 3.0–the latest connectivity standard.
Built to connect easily with next-generation components and peripherals, USB 3.0 transfers
data 10X faster and is also backward compatible with USB 2.0 components.
HDMI support
High-Definition Multimedia Interface (HDMI) is a set of digital video standards that delivers
multi-channel audio and uncompressed digital video for full HD 1080p visuals through a
single cable. Supporting HDCP copy protection such as HD DVD and Blu-ray Discs, HDMI
provides you with the highest-quality home theater experience.
DVI-D Support
DVI (Digital Visual Interface) provides high visual quality of digital display devices such as
LCD monitor. The interface of this motherboard supports dual display output: DVI-D/HDMI,
VGA/HDMI, or DVI-D/VGA. Refer to page 2-29 for details.
Green ASUS
This motherboard and its packaging comply with the European Union’s Restriction on the
use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating
environment-friendly and recyclable products/packaging to safeguard consumers’ health
while minimizing the impact on the environment.
1-2
Chapter 1: Product Introduction
1.3.2
ASUS Exclusive Overclocking Features
TurboV
Chapter 1
Feel the adrenaline rush of real-time O.C. – now a reality with the ASUS TurboV. This easy
O.C. tool allows you to overclock without exiting or rebooting the OS; and its user-friendly
interface makes overclock with just a few clicks away. Moreover, the ASUS OC profiles in
TurboV provides the best O.C. settings in different scenarios. Refer to page 4-6 for details.
Turbo Key
ASUS Turbo Key allows you to turn the PC power button into a physical overclocking button.
After the easy setup, Turbo Key can boost performances without interrupting ongoing work or
games, simply through pressing the button Refer to page 4-8 for details.
GPU Boost
GPU Boost overclocks the integrated GPU in real time for the best graphics performance.
User-friendly UI facilitates flexible frequency and voltage adjustments. Its ability to deliver
multiple overclocking profiles also provides rapid and stable system-level upgrades. Refer to
page 4-7 for details.
1.3.3
ASUS Xtreme Phase
ASUS 8+3 Phase Power Design
Unleashes ultimate memory performances with independent power to core components,
while providing fast transient response and stability for the CPU under heavy loading or
overclocking modes.
1.3.4
ASUS Exclusive Features
Express Gate
Express Gate is an ASUS exclusive OS that provides you with quick access to the Internet
and key applications before entering the Windows® OS. Refer to page 3-38 and 4-10 for
details.
MemOK!
Memory compatibility is among the top concerns during computer upgrades. Worry no more.
MemOK! is the fastest memory booting solution today. This remarkable memory rescue tool
requires nothing but a push of a button to patch memory issues and get your system up and
running in no time. The technology is able to determine failsafe settings that can dramatically
improve your system booting success. Refer to page 2-28 for details.
ASUS EPU
The new ASUS EPU—the world’s first power saving engine, has been upgraded to a new 6
engine version, which provides total system power savings by detecting current PC loadings and
intelligently moderating power in real-time. With auto phase switching for components (which
includes the CPU, VGA card / integrated GPU, memory, chipset, hard drives and CPU cooler /
system fans), the EPU automatically provides the most appropriate power usage via intelligent
acceleration and overclocking—helping save power and money. Refer to page 4-9 for details.
ASUS P7H55D-M EVO
1-3
1.3.5
ASUS Quiet Thermal Solutions
ASUS Quiet Thermal solution makes system more stable and enhances the overclocking
capability.
Chapter 1
ASUS Fanless Design—Heat-sink solution
The crystal-shaped heatsink features 0-dB thermal solution that offers users a noiseless PC
environment. Not only the beautiful shape upgrades the visual enjoyment for motherboard
users, but also the heatsink design lowers the temperature of the chipset and power phase
area through high efficient heat-exchange. Combined with usability and aesthetics, the ASUS
crystal-shaped heatsink will give users an extremely silent and cooling experience with the
elegant appearance!
Fan Xpert
ASUS Fan Xpert intelligently allows you to adjust both the CPU and chassis fan speeds
according to different ambient temperatures caused by different climate conditions in different
geographic regions and your PC’s loading. The built-in variety of useful profiles offer flexible
controls of fan speed to achieve a quiet and cool environment. Refer to page 4-5 for details.
1.3.6
ASUS EZ DIY
ASUS EZ DIY feature collection provides you with easy ways to install computer components,
update the BIOS or back up your favorite settings.
ASUS Q-DIMM
ASUS Q-DIMM enhances your DIY experience by speeding up and simplifying the DIY
process!
ASUS Q-Connector
ASUS Q-Connector allows you to easily connect or disconnect the chassis front panel cables
to the motherboard. This unique module eliminates the trouble of connecting the system
panel cables one at a time and avoiding wrong cable connections. Refer to page 2-35 for
details.
ASUS O.C. Profile
The motherboard features the ASUS O.C. Profile that allows you to conveniently store or
load multiple BIOS settings. The BIOS settings can be stored in the CMOS or a separate file,
giving you the freedom to share and distribute your favorite settings.
ASUS CrashFree BIOS 3
ASUS CrashFree BIOS 3 allows you to restore corrupted BIOS data from a USB flash disk
containing the BIOS file. This protection eliminates the need to buy a replacement ROM chip.
ASUS EZ-Flash 2
ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a
bootable floppy disk or an OS-based utility. Refer to page 3-4 for details.
1-4
Chapter 1: Product Introduction
Chapter 2
Chapter 2:
Hardware information
2.1
Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
Unplug the power cord from the wall socket before touching any component.
•
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
•
Hold components by the edges to avoid touching the ICs on them.
•
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
•
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Chapter 2
•
ASUS P7H55D-M EVO
2-1
2.2
Motherboard overview
2.2.1
Motherboard layout
Chapter 2
Refer to 2.8 Connectors for more information about rear panel connectors and internal
connectors.
2-2
Chapter 2: Hardware information
Layout contents
Connectors/Jumpers/Slots
Page
1.
ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
2-40
2.
LGA1156 CPU Socket
2-5
3.
DDR3 DIMM slots
2-10
4.
MemOK! switch
2-28
5.
CPU, chassis, and power fan connectors (4-pin CPU_FAN,
4-pin CHA_FAN1, 3-pin PWR_FAN)
2-38
6.
Clear RTC RAM (3-pin CLRTC)
2-27
7.
Intel® H55 Serial ATA 3.0 Gb/s connectors (7-pin SATA1–6 [blue])
2-35
8.
IDE connector (40-1 pin PRI_EIDE)
2-34
9.
System panel connector (20-8 pin PANEL)
2-41
10.
Serial port connector (10-1 pin COM1)
2-36
11.
USB connectors (10-1 pin USB78, USB910, USB1112)
2-37
12.
IEEE 1394a port connector (10-1 pin IE1394_2)
2-36
13.
Digital audio connector (4-1 pin SPDIF_OUT)
2-39
14.
Front panel audio connector (10-1 pin AAFP)
2-39
15.
Standby power LED (SB_PWR)
2-43
ASUS P7H55D-M EVO
Chapter 2
2.2.2
2-3
2.2.3
Placement direction
When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.
2.2.4
Screw holes
Place eight screws into the holes indicated by circles to secure the motherboard to the
chassis.
DO NOT overtighten the screws! Doing so can damage the motherboard.
Chapter 2
Place this side towards
the rear of the chassis
2-4
Chapter 2: Hardware information
2.3
Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA1156 socket designed for the Intel®
Core™ i7 / Core™ i5 / Core™ i3 / Pentium® processor.
2.3.1
•
Upon purchase of the motherboard, ensure that the PnP cap is on the socket and
the socket contacts are not bent. Contact your retailer immediately if the PnP cap
is missing, or if you see any damage to the PnP cap/socket contacts/motherboard
components. ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
•
Keep the cap after installing the motherboard. ASUS will process Return Merchandise
Authorization (RMA) requests only if the motherboard comes with the cap on the
LGA1156 socket.
•
The product warranty does not cover damage to the socket contacts resulting from
incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP
cap.
Chapter 2
Ensure that all power cables are unplugged before installing the CPU.
Installing the CPU
To install a CPU:
1.
Locate the CPU socket on the motherboard.
2.
Press the load lever with your thumb (A),
and then move it to the right (B) until it is
released from the retention tab.
To prevent damage to the socket pins,
do not remove the PnP cap unless you
are installing a CPU.
ASUS P7H55D-M EVO
Load lever
A
B
Retention tab
2-5
3.
Lift the load lever in the direction of the
arrow until the load plate is completely
lifted.
Load plate
Chapter 2
4.
Remove the PnP cap from the CPU
socket by lifting the tab only.
PnP cap
Cap tab
5.
Position the CPU over the socket,
ensuring that the gold triangle is on the
bottom‑left corner of the socket, and then
fit the socket alignment keys into the CPU
notches.
The CPU fits in only one correct
orientation. DO NOT force the CPU
into the socket to prevent bending
the connectors on the socket and
damaging the CPU!
CPU notches
Gold
triangle
mark
Alignment keys
2-6
Chapter 2: Hardware information
6.
Apply some Thermal Interface Material
to the exposed area of the CPU that the
heatsink will be in contact with, ensuring
that it is spread in an even thin layer.
Some heatsinks come with pre-applied
thermal paste. If so, skip this step.
7.
Close the load plate (A), and then push
down the load lever (B), ensuring that
the front edge of the load plate slides
under the retention lock (C).
Chapter 2
The Thermal Interface Material is
toxic and inedible. DO NOT eat it. If
it gets into your eyes or touches your
skin, wash it off immediately, and seek
professional medical help.
B
A
C
8.
Insert the load lever under the retention
tab.
ASUS P7H55D-M EVO
2-7
2.3.2
Installing the CPU heatsink and fan
The Intel LGA1156 processor requires a specially designed heatsink and fan assembly to
ensure optimum thermal condition and performance.
®
•
When you buy a boxed Intel® processor, the package includes the CPU fan and
heatsink assembly. If you buy a CPU separately, ensure that you use only Intel®‑certified
multi‑directional heatsink and fan.
•
Your Intel® LGA1156 heatsink and fan assembly comes in a push-pin design and does
not require any tool to install.
•
Use an LGA1156-compatible CPU heatsink and fan assembly only. The LGA1156
socket is incompatible with the LGA775 and LGA1366 sockets in size and dimension.
Chapter 2
If you purchased a separate CPU heatsink and fan assembly, ensure that the Thermal
Interface Material is properly applied to the CPU heatsink or CPU before you install the
heatsink and fan assembly.
Ensure that you have installed the motherboard to the chassis before you install the CPU
fan and heatsink assembly.
To install the CPU heatsink and fan:
1.
2.
Place the heatsink on top of the installed
CPU, ensuring that the four fasteners
match the holes on the motherboard.
A
B
B
Push down two fasteners at a time in
a diagonal sequence to secure the
heatsink and fan assembly in place.
A
B
B
A
A
1
1
Orient the heatsink and fan assembly such that the CPU fan cable is closest to the CPU fan
connector.
2-8
Chapter 2: Hardware information
3.
Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN.
2.3.3
Uninstalling the CPU heatsink and fan
To uninstall the CPU heatsink and fan:
1. 2.
3.
4.
Chapter 2
DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if
you fail to plug this connector.
Disconnect the CPU fan cable from the
connector on the motherboard.
Rotate each fastener counterclockwise.
Pull up two fasteners at a time in a
diagonal sequence to disengage the
heatsink and fan assembly from the
motherboard.
A
B
B
A
A
B
B
A
Carefully remove the heatsink and fan assembly from the motherboard.
ASUS P7H55D-M EVO
2-9
2.4
System memory
2.4.1
Overview
The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules
(DIMM) sockets.
A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched
differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for
better performance with less power consumption.
The figure illustrates the location of the DDR3 DIMM sockets:
Chapter 2
Recommended memory configurations
One DIMM:
Install one memory module in any slot as a single-channel operation.
Two DIMMs (dual-channel operation):
Four DIMMs (dual-channel operation):
2-10
Chapter 2: Hardware information
2.4.2
Memory configurations
•
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
•
Based on Intel specification, you can only install one X.M.P. DIMM per channel.
•
According to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect
the CPU.
•
According to Intel CPU spec, CPUs with a core frequency of 2.66G support the
maximum DIMM frequency of up to DDR3-1333. To use DIMMs of a higher frequency
with a 2.66G CPU, enable the DRAM O.C. Profile feature in BIOS. Refer to section
3.5.1 Ai Overclock Tuner for details.
•
Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
•
Due to the memory address limitation on 32-bit Windows OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3GB system memory if you are using a 32-bit Windows OS.
- Install a 64-bit Windows OS when you want to install 4GB or more on the
motherboard.
For more details, refer to the Microsoft® support site at
http://support.microsoft.com/kb/929605/en-us.
•
This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less
(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).
•
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 3.5 Ai Tweaker menu for manual memory
frequency adjustment.
•
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
ASUS P7H55D-M EVO
Chapter 2
You may install 1GB, 2GB and 4GB unbuffered and non‑ECC DDR3 DIMMs into the DIMM
sockets.
2-11
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-2200MHz capability for Lynnfield CPU at 2.8 and 2.93Ghz
Vendor
Part No.
Size
G.SKILL
F3-17600CL8D-4GBPS(XMP)
4GB(2 x 2GB) DS
G.SKILL
F3-17600CL9D-4GBTDS(XMP)
SS/DS Chip Brand Chip NO. Timing
4GB(2 x 2GB) DS
-
-
-
8-8-8-24
9-9-9-24
-
DIMM socket support
Voltage (Optional)
1 DIMM 2 DIMM 4 DIMM
1.65
1.65
•
•
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-2133MHz capability for Lynnfield CPU at 2.8 and 2.93Ghz
Part No.
Size
A-DATA
AX3U2133XB2G10-EF(XMP)
4GB(2 x 2GB) DS
-
-
-
2.05~2.15 •
A-DATA
AD32133F002GMU(XMP)
6GB(3 x 2GB) DS
-
-
-
2.05~2.15 •
A-DATA
AX3U2133XB2G10-FF(XMP)
SS/DS Chip Brand Chip NO.
DIMM socket support
(Optional)
Vendor
6GB(3 x 2GB) DS
KINGSTON KHX2133C8D3T1K2/4GX(XMP) 4GB(2 x 2GB) DS
-
-
-
Timing Voltage
-
-
1 DIMM 2 DIMM 4 DIMM
2.05~2.15 •
8
1.65
•
Chapter 2
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-2000MHz capability for Lynnfield CPU at 2.8 and 2.93Ghz
DIMM socket support
Voltage (Optional)
1 DIMM 2 DIMM 4 DIMM
Vendor
Part No.
Size
CORSAIR
CMG4GX3M2A2000C8(XMP)
4GB(2 x 2GB) DS
-
-
8-8-8-24 1.65
•
•
G.SKILL
F3-16000CL9D-4GBTD(XMP)
4GB(2 x 2GB) DS
-
-
9-9-9-24 1.65
•
•
G.SKILL
G.SKILL
G.SKILL
GEIL
GEIL
F3-16000CL9D-4GBRH(XMP)
F3-16000CL7T-6GBPS(XMP)
F3-16000CL9T-6GBPS(XMP)
GU34GB2000C9DC(XMP)
GE38GB2000C9QC(XMP)
KINGSTON KHX2000C8D3T1K3/3GX(XMP)
SS/DS Chip Brand Chip NO. Timing
4GB(2 x 2GB) DS
-
6GB(3 x 2GB) DS
-
6GB(3 x 2GB) DS
3GB(3 x 1GB) SS
OCZ
6GB(3 x 2GB) DS
OCZ3P20002GK(EPP)
Patriot
PVS32G2000LLKN
Patriot
OCZ3B2000LV6GK
PVT36G2000LLK(XMP)
-
-
-
-
KINGSTON KHX2000C9D3T1FK3/6GX(XMP) 6GB(3 x 2GB) DS
OCZ
-
-
8GB(4 x 2GB) DS
6GB(3 x 2GB) DS
-
-
4GB(2 x 2GB) DS
KINGSTON KHX2000C9D3T1K3/6GX(XMP)
-
-
-
-
-
2GB(2 x 1GB) SS
-
-
-
-
2GB(2 x 1GB) SS
-
-
6GB(3 x 2GB) DS
-
-
-
9-9-9-24 1.65
•
7-8-7-20 1.65
•
9-9-9-24 1.65
9-9-9-28 1.65
1.65
9
1.65
9
•
•
•
•
•
1.9
7-8-7
•
•
•
1.65
9
•
•
9-9-9-28 1.65
8
•
1.65
•
8-8-8-24 1.65
•
9-9-9-24 2
•
•
•
•
•
•
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-2000MHz capability for Lynnfield CPU at 2.66Ghz
Vendor
Part No.
Size
SS/DS Chip Brand Chip NO. Timing
G.SKILL
F3-16000CL9D-4GBRH(XMP)
4GB(2 x 2GB)
DS
-
-
9-9-9-24
G.SKILL
F3-16000CL9T-6GBPS(XMP)
6GB(3 x 2GB)
DS
-
-
9-9-9-24
G.SKILL
GEIL
Gingle
2-12
F3-16000CL9D-4GBTD(XMP)
GE38GB2000C9QC(XMP)
9CAASS37AZZ01D1
4GB(2 x 2GB)
8GB(4 x 2GB)
2GB
DS
DS
DS
-
-
9-9-9-24
9-9-9-28
9-9-9-24
DIMM socket support
Voltage (Optional)
1 DIMM 2 DIMM 4 DIMM
1.65
•
•
1.65
•
•
1.65
1.65
-
•
•
•
•
•
Chapter 2: Hardware information
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1866MHz capability for Lynnfield CPU at 2.8 and 2.93Ghz
Vendor
CORSAIR
Size
TR3X6G1866C9DVer4.1(XMP)
6GB(3 x 2GB) DS
-
-
9-9-9-24 1.65
•
•
F3-15000CL9D-4GBTD(XMP)
4GB(2 x 2GB) DS
-
-
9-9-9-24 1.65
•
•
G.SKILL
F3-15000CL9D-4GBRH (XMP)
KINGSTON
KHX1866C9D3T1K3/6GX(XMP)
G.SKILL
OCZ
OCZ
OCZ
OCZ
OCZ3RPR1866C9LV3GK
OCZ3P1866LV4GK
OCZ3P1866C9LV6GK
OCZ3RPR1866C9LV6GK
Super Talent W1866UX2G8(XMP)
SS/DS Chip Brand Chip NO. Timing
6GB(3 x 2GB) DS
-
-
2GB(2 x 1GB) SS
2GB(2 x 1GB) SS
•
•
1.65
1.65
•
•
•
•
•
•
•
•
•
•
8-8-8-24 1.9
-
•
•
•
8-8-8-24 1.9
-
-
1.65
•
8-8-8-24 -
-
-
9-9-9
•
•
•
1.65
9-9-9
-
-
1.65
9-9-9
-
-
2GB(2 x 1GB) SS
9
9-9-9
-
-
6GB(3 x 2GB) DS
BoxP/N:TXD34096M1866HC7DC-L 4GB(2 x 2GB) DS
(TXD32048M1866HC7-L)(XMP)
-
-
6GB(3 x 2GB) DS
Team
-
-
4GB(2 x 2GB) DS
PVS32G1866LLK(XMP)
PVS32G1866LLK(XMP)
-
3GB(3 x 1GB) SS
9-9-9-24 1.65
-
-
4GB(2 x 2GB) DS
Patriot
Patriot
DIMM socket support
Voltage (Optional)
1 DIMM 2 DIMM 4 DIMM
Part No.
•
7-7-7-21 1.65
•
•
•
Vendor
Part No.
Size
KINGSTON
KHX1800C9D3T1K3/6GX(XMP)
6GB(3 x 2GB)
OCZ
OCZ3P18004GK
4GB(2 x 2GB)
OCZ
Transcend
OCZ3P18002GK
TX1800KLU-2GK(XMP)
2GB(2 x 1GB)
2GB(2 x 1GB)
Chapter 2
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1800MHz capability for Lynnfield CPU at 2.8 and 2.93Ghz
DIMM socket support
SS/DS Chip Brand Chip NO. Timing Voltage (Optional)
1 DIMM 2 DIMM 4 DIMM
DS
-
-
-
1.65
•
DS
-
-
8
1.9
•
SS
-
SS
-
-
8
-
8
-
•
•
•
•
•
•
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1800MHz capability for Lynnfield CPU at 2.66Ghz
Vendor
Part No.
Size
SS/DS Chip Brand Chip NO. Timing
KINGSTON KHX1800C9D3T1K3/6GX(XMP) 6GB(3 x 2GB) DS
-
-
-
OCZ
-
-
8
OCZ
OCZ3P18002GK
2GB(2 x 1GB) SS
OCZ
OCZ3P18004GK
4GB(2 x 2GB) DS
Patriot
OCZ3P18002GK
PVS32G1800LLKN(EPP)
2GB(2 x 1GB) SS
2GB(2 x 1GB) SS
-
-
8
8
DIMM socket support
Voltage (Optional)
1 DIMM 2 DIMM 4 DIMM
1.65
•
•
-
•
•
-
1.9
8-8-8-20 1.9
•
•
•
•
•
•
•
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1600MHz capability for Lynnfield CPU at 2.8 and 2.93Ghz
Part No.
Size
SS/DS Chip Brand Chip NO. Timing
A-DATA
AD31600G001GMU
1GB
SS
-
-
9-9-9-24 1.65~1.85 •
•
A-DATA
AX3U1600PB1G8-2P
2GB(2 x 1GB)
SS
-
-
8-8-8-24 1.65-1.85 •
•
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
AX3U1600GB1G9-AG
AD31600E001GMU
AX3U1600GB1G9-3G
AX3U1600PB1G8-3P
AX3U1600GB2G9-AG(XMP)
AX3U1600XB2G7-EF(XMP)
AD31600F002GMU(XMP)
AX3U1600GB2G9-3G(XMP)
ASUS P7H55D-M EVO
2GB(2 x 1GB)
3GB(3 x 1GB)
3GB(3 x 1GB)
3GB(3 x 1GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
SS
SS
SS
SS
DS
DS
DS
DS
-
-
Voltage
DIMM socket support
(Optional)
Vendor
1 DIMM 2 DIMM 4 DIMM
9-9-9-24 1.65~1.85 •
8-8-8-24 1.65-1.85 •
9-9-9-24 1.65~1.85 •
8-8-8-24 1.65-1.85 •
9-9-9-24 1.65~1.85 •
7-7-7-20 1.75-1.85 •
7-7-7-20 1.75-1.85 •
9-9-9-24 1.65~1.85 •
•
•
•
•
•
•
•
•
•
•
•
•
•
2-13
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1600MHz capability for Lynnfield CPU at 2.8 and 2.93Ghz (cont.)
Part No.
Size
SS/DS Chip Brand Chip NO. Timing
A-DATA
AX3U1600GB2G9-3G(XMP)
6GB(3 x 2GB)
DS
-
-
9-9-9-24 1.65~1.85 •
•
A-DATA
AX3U1600XB2G7-FF(XMP)
6GB(3 x 2GB)
DS
-
-
7-7-7-20 1.75-1.85 •
•
A-DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Chapter 2
Crucial
Crucial
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
AX3U1600GB2G9-3G
TR3X3G1600C8D
TR3X3G1600C8DVer2.1(XMP)
TR3X3G1600C9Ver1.1(XMP)
CMD4GX3M2A1600C8(XMP)
CMG4GX3M2A1600C7(XMP)
CMX4GX3M2A1600C9(XMP)
TR3X6G1600C8D
TR3X6G1600C8DVer2.1(XMP)
TR3X6G1600C9Ver2.1(XMP)
CMD8GX3M4A1600C8(XMP)
CMX8GX3M4A1600C9(XMP)
BL12864BA1608.8SFB(XMP)
BL25664BN1608.16FF(XMP)
F3-12800CL9D-2GBNQ
F3-12800CL9D-4GBRL
F3-12800CL7D-4GBRH(XMP)
F3-12800CL8T-6GBHK(XMP)
F3-12800CL8T-6GBPI(XMP)
F3-12800CL9T-6GBNQ
GV34GB1600C8DC
KHX1600C9D3K3/12GX(XMP)
KHX1600C8D3K2/4GX(XMP)
Patriot
Patriot
Patriot
Patriot
Team
2-14
4GB(2 x 2GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
8GB(4 x 2GB)
8GB(4 x 2GB)
1GB
2GB
2GB(2 x 1GB)
2GB(2 x 1GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
4GB(2 x 2GB)
SS
SS
DS
DS
DS
DS
DS
DS
DS
DS
SS
DS
SS
SS
DS
DS
DS
DS
DS
12GB(3 x 4GB) DS
DS
4GB(2 x 2GB)
4GB(2 x 2GB)
OCZ3P1600EB1G
1GB
KHX1600C9D3K3/6GX(XMP)
OCZ3G1600LV3GK
OCZ3P1600LV3GK
OCZ3OB1600LV4GK
OCZ3P1600LV4GK
OCZ3X16004GK(XMP)
OCZ3X1600LV4GK(XMP)
OCZ3FXE1600C7LV6GK
OCZ3G1600LV6GK
OCZ3X1600LV6GK(XMP)
OCZ3X1600LV6GK(XMP)
M2Y2G64CB8HA9N-DG(XMP)
PATRIOT
4GB(2 x 2GB)
KHX1600C9D3K2/4G
Elixir
Patriot
3GB(3 x 1GB)
SS
KHX1600C8D3T1K2/4GX(XMP) 4GB(2 x 2GB)
CS322271
Mushkin
3GB(3 x 1GB)
DS
Cell Shock
Mushkin
3GB(3 x 1GB)
DS
4GB(2 x 2GB)
KHX1600C8D3K2/4GX(XMP)
Super Talent WB160UX6G8(XMP)
EK Memory
6GB(3 x 2GB)
EKM324L28BP8-I16(XMP)
996657
998659(XMP)
PVT33G1600ELK
PGS34G1600LLKA
PVS34G1600LLK(XMP)
PVS34G1600LLKN
PVT36G1600ELK
PVT36G1600LLK(XMP)
6GB(3 x 2GB)
3GB(3 x 1GB)
3GB(3 x 1GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
2GB(2 x 1GB)
4GB(2 x 2GB)
2GB
4GB(2 x 2GB)
6GB(3 x 2GB)
3GB(3 x 1GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
BoxP/N:
TXD34096M1600HC6DC-L
4GB(2 x 2GB)
(TXD32048M1600HC6-L)(XMP)
DS
DS
DS
SS
SS
SS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
DS
SS
DS
DS
DS
DS
DS
DS
-
-
Voltage
DIMM socket support
(Optional)
Vendor
1 DIMM 2 DIMM 4 DIMM
9-9-9-24 1.65~1.85 •
8-8-8-24 1.65
•
9-9-9-24 1.65
•
7-7-7-20 1.65
•
8-8-8-24 1.65
8-8-8-24 1.65
9-9-9-24 1.65
8-8-8-24 1.65
8-8-8-24 1.65
9-9-9-24 1.65
8-8-8-24 1.65
9-9-9-24 1.65
-
1.8
-
1.6
8-8-8-24 1.65
-
1.6
7-7-7-24 1.65
8-8-8-21 1.6-1.65
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8-8-8-21 1.6~1.65
•
•
•
8-8-8-28 1.6
•
•
•
9-9-9-24 1.5-1.6
-
1.65
8
1.65
8
1.65
8
1.65
-
1.7~1.9
9
1.65
7-6-6-24 -
•
•
•
•
•
•
•
8-8-8
1.65
•
9-9-9
1.65
7-7-7
7-7-7
7-7-7
8-8-8
7-7-7
8-8-8
8-8-8
8-8-8
-
1.65
1.65
1.9
1.65
1.65
1.65
1.65
1.65
-
7-7-7-14 1.7-1.9
9
-
-
7-7-7-20 -
9-9-9-24 1.5-1.6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
7-7-7-20 1.9
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8-8-8-24 1.65
•
•
6-7-6-18 1.65
•
•
9-9-9-24 1.65
•
•
•
7-7-7-20 2.0
•
•
•
•
9-9-9-24 1.65
7-7-7-20 1.7
•
•
•
•
Chapter 2: Hardware information
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1600MHz capability for Lynnfield CPU at 2.66Ghz
DIMM socket support
(Optional)
Vendor
Part No.
Size
SS/ Chip Brand Chip NO. Timing
DS
A-DATA
AD31600G001GMU
1GB
SS
-
-
9-9-9-24 1.65~1.85 •
•
•
A-DATA
AX3U1600PB1G8-2P
2GB(2 x 1GB) SS
-
-
8-8-8-24 1.65-1.85 •
•
•
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Crucial
Crucial
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
AX3U1600GB1G9-AG
AD31600E001GMU
AX3U1600GB1G9-3G
AX3U1600PB1G8-3P
AX3U1600GB2G9-AG(XMP)
AX3U1600XB2G7-EF(XMP)
AD31600F002GMU(XMP)
AX3U1600GB2G9-3G(XMP)
AX3U1600GB2G9-3G(XMP)
AX3U1600GB2G9-3G
AX3U1600XB2G7-FF(XMP)
TR3X3G1600C8D
TR3X3G1600C8DVer2.1(XMP)
TR3X3G1600C9Ver1.1(XMP)
CMD4GX3M2A1600C8(XMP)
CMG4GX3M2A1600C7(XMP)
CMX4GX3M2A1600C9(XMP)
TR3X6G1600C8D
TR3X6G1600C8DVer2.1(XMP)
TR3X6G1600C9Ver2.1(XMP)
CMD8GX3M4A1600C8(XMP)
CMX8GX3M4A1600C9(XMP)
BL12864BA1608.8SFB(XMP)
BL25664BN1608.16FF(XMP)
F3-12800CL9D-2GBNQ
F3-12800CL9D-4GBRL
F3-12800CL7D-4GBRH(XMP)
F3-12800CL8T-6GBPI(XMP)
F3-12800CL9T-6GBNQ
GV34GB1600C8DC
KINGSTON
KHX1600C9D3K3/12GX(XMP)
KINGSTON
KHX1600C8D3K2/4GX(XMP)
KINGSTON
KHX1600C8D3T1K2/4GX(XMP)
KINGSTON
KINGSTON
KINGSTON
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
KHX1600C8D3K2/4GX(XMP)
KHX1600C9D3K2/4G
KHX1600C9D3K3/6GX(XMP)
OCZ3P1600EB1G
OCZ3G1600LV3GK
OCZ3P1600LV3GK
OCZ3OB1600LV4GK
OCZ3P1600EB4GK
OCZ3P1600LV4GK
OCZ3X16004GK(XMP)
OCZ3X1600LV4GK(XMP)
OCZ3FXE1600C7LV6GK
OCZ3G1600LV6GK
OCZ3G1600LV6GK
OCZ3X1600LV6GK(XMP)
OCZ3X1600LV6GK(XMP)
Super Talent WP160UX4G8(XMP)
Super Talent WP160UX4G9(XMP)
Super Talent WB160UX6G8(XMP)
Super Talent WB160UX6G8(XMP)
Super Talent WB160UX6G9(XMP)
ASUS P7H55D-M EVO
2GB(2 x 1GB) SS
3GB(3 x 1GB) SS
3GB(3 x 1GB) SS
3GB(3 x 1GB) SS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
3GB(3 x 1GB) SS
3GB(3 x 1GB) SS
3GB(3 x 1GB) SS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
8GB(4 x 2GB) DS
8GB(4 x 2GB) DS
1GB
2GB
SS
DS
2GB(2 x 1GB) SS
2GB(2 x 1GB) SS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
4GB(2 x 2GB) DS
12GB(3 x
4GB)
-
-
1 DIMM 2 DIMM 4 DIMM
9-9-9-24 1.65~1.85 •
8-8-8-24 1.65-1.85 •
9-9-9-24 1.65~1.85 •
8-8-8-24 1.65-1.85 •
9-9-9-24 1.65~1.85 •
7-7-7-20 1.75-1.85 •
7-7-7-20 1.75-1.85 •
9-9-9-24 1.65~1.85 •
9-9-9-24 1.65~1.85 •
9-9-9-24 1.65~1.85 •
7-7-7-20 1.75-1.85 •
8-8-8-24 1.65
•
9-9-9-24 1.65
•
8-8-8-24 1.65
8-8-8-24 1.65
7-7-7-20 1.65
9-9-9-24 1.65
8-8-8-24 1.65
8-8-8-24 1.65
9-9-9-24 1.65
8-8-8-24 1.65
9-9-9-24 1.65
-
1.8
-
1.6
8-8-8-24 1.65
-
1.6
7-7-7-24 1.65
8-8-8-21 1.6~1.65
9-9-9-24 1.5-1.6
8-8-8-28 1.6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DS
-
-
-
1.65
•
•
•
4GB(2 x 2GB) DS
-
-
8
1.65
•
•
•
4GB(2 x 2GB) DS
-
-
8
1.65
•
•
•
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
1GB
SS
3GB(3 x 1GB) SS
3GB(3 x 1GB) SS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
-
-
8
-
9
1.65
1.7~1.9
1.65
7-6-6-24 8-8-8
1.65
9-9-9
1.65
7-7-7
7-7-6
7-7-7
7-7-7
8-8-8
7-7-7
8-8-8
8-8-8
8-8-8
8-8-8
8
9
-
8
9
1.65
1.8
1.65
1.9
1.65
1.65
1.65
1.65
1.65
1.65
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Chapter 2
A-DATA
Voltage
•
•
•
•
•
•
•
•
2-15
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1600MHz capability for Lynnfield CPU at 2.66Ghz (cont.)
SS/ Chip Brand Chip NO. Timing
DS
Vendor
Part No.
Size
Cell Shock
CS322271
2GB(2 x 1GB) DS
-
-
7-7-7-14 1.7-1.9
Elixir
M2Y2G64CB8HA9N-DG(XMP)
2GB
-
-
-
Mushkin
998659(XMP)
EK Memory EKM324L28BP8-I16(XMP)
Mushkin
Patriot
PATRIOT
Patriot
Patriot
Patriot
Patriot
Patriot
Patriot
Team
996657
PVT33G1600ELK
PGS34G1600LLKA
PVS34G1600ELK
PVS34G1600LLK(XMP)
PVS34G1600LLKN
PVT36G1600ELK
PVT36G1600ELK
PVT36G1600LLK(XMP)
4GB(2 x 2GB) DS
DS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
3GB(3 x 1GB) SS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
4GB(2 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
6GB(3 x 2GB) DS
BoxP/N:TXD34096M1600HC6DC-L 4GB(2 x 2GB) DS
(TXD32048M1600HC6-L)(XMP)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Voltage
-
9
-
7-7-7-20 -
9-9-9-24 1.5-1.6
9-9-9-24 1.65
7-7-7-20 1.7
DIMM socket support
(Optional)
1 DIMM 2 DIMM 4 DIMM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
9-9-9-24 1.65
•
•
9-9-9-24 1.65
•
•
8-8-8-24 1.65
•
•
•
6-7-6-18 1.65
•
•
•
7-7-7-20 2.0
•
•
•
7-7-7-20 1.9
•
•
•
9-9-9-24 1.8
•
•
•
•
•
•
•
Chapter 2
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1333MHz capability for Lynnfield CPU at 2.66, 2.8 and 2.93Ghz
Vendor
Part No.
Size
SS/ Chip
DS Brand
Chip NO.
Timing
Voltage
DIMM socket support
(Optional)
A-DATA
AD3133301GOU
1GB
SS A-DATA
AD30908C8D-15IG
-
-
•
•
•
A-DATA
AD3U1333B2G9-2
2GB
DS A-DATA
AD30908C8D-15IG
-
-
•
•
•
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Crucial
Crucial
AX3U1333PB2G7-2P
AD3U1333C4G9-B
AD31333E002G0U
AX3U1333PB2G7-3P
TR3X3G1333C9 (Ver2.1)
CM3X1024-1333C9DHX
2GB
DS A-DATA
4GB(2 x 2GB) DS 4GB
DS Hynix
6GB(3 x 2GB) DS 6GB(3 x 2GB) DS 3GB(3 x 1GB) SS -
ELPIDA
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
-
7-7-7-20 1.65-1.85 •
-
9-9-9-24 1.5
•
9-9-9-24 1.70
•
-
•
TR3X6G1333C9 (Ver2.1)
6GB(3 x 2GB) DS -
-
9-9-9-24 1.5
•
•
CT12864BA1339.8FF
1GB
SS MICRON
D9KPT
9
-
•
•
D9KPT(ECC)
9
-
•
•
•
D9KPT
9
-
•
•
•
9
-
CMX8GX3M4A1333C9
CT12864BA1339.8SFD
8GB(4 x 2GB) DS 1GB
SS MICRON
BL25664BN1337.16FF(XMP)
CT25664BA1339.16SFD
CT25672BA1339.18FF
BL25664BA1336.16SFB1
EBJ10UE8BAW0-DJ-E
EBJ10UE8BDF0-DJ-F
EBJ10UE8EDF0-DJ-F
EBJ21UE8BDF0-DJ-F
EBJ21UE8EDF0-DJ-F
F3-10600CL7D-2GBPI
F3-10600CL8D-2GBHK
F3-10666CL7T-6GBPK(XMP)
F3-10666CL7D-4GBPI(XMP)
F3-10666CL7D-4GBRH(XMP)
F3-10666CL8D-4GBHK(XMP)
F3-10666CL8D-4GBRM(XMP)
2GB
2GB
2GB
DS -
DS MICRON
DS MICRON
4GB(2 x 2GB) DS NA
1GB
SS ELPIDA
1GB
SS ELPIDA
1GB
2GB
2GB
SS ELPIDA
DS ELPIDA
DS ELPIDA
2GB(2 x 1GB) SS 2GB(2 x 1GB) SS 2GB
DS -
4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 4GB(2 x 2GB) DS -
-
MT8JF12864AY1G4D1
-
D9JNM
D9KPT(ECC)
-
J1108BABG-DJ-E
J1108BDSE-DJ-F
J1108EDSE-DJ-F
J1108BDSE-DJ-F
J1108EDSE-DJ-F
-
9-9-9-24 1.5
-
-
7-7-7-24 1.65
-
-
6-6-6-20 1.8
9
-
-
-
-
-
1.65
1.65
7-7-7-18 1.5-1.6
7-7-7-21 1.5
7-7-7-21 1.5
8-8-8-21 1.5-1.6
8-8-8-21 1.5-1.6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
9-9-9-24 1.70
•
•
•
•
-
1.1
•
•
•
-
-
•
•
•
BoxP/N:TW3X4G1333C9DHX
4GB(2 x 2GB) DS (CM3X2048-1333C9DHX)Ver3.2
-
7-7-7-20 1.65-1.85 •
•
•
DS MICRON
ELPIDA
•
9-9-9-24 1.5
2GB
ELPIDA
H5TQ2G83AFRH9C 9-9-9-24 -
•
•
-
CT25664BA1339.16FF
ELPIDA
7-7-7-20 1.65-1.85 •
•
DS -
Crucial
ELPIDA
•
2GB
2GB(2 x 1GB) DS -
SS MICRON
Crucial
-
CM3X2G1333C9
BoxP/N:TWIN3X2048-1333C9
(CM3X1024-1333C9)Ver1.1
1GB
Crucial
-
-
DS -
CT12872BA1339.9FF
Crucial
AD30908C8D-15IG
1GB
Crucial
Crucial
2-16
AD31333002GOU
1 DIMM 2 DIMM 4 DIMM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Chapter 2: Hardware information
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1333MHz capability for Lynnfield CPU at 2.66, 2.8 and 2.93Ghz (cont.)
Part No.
Size
G.SKILL
F3-10666CL9T-6GBNQ
GEIL
GV34GB1333C7DC
GEIL
Hynix
Hynix
Hynix
GG34GB1333C9DC
HMT112U6BFR8C-H9
HMT125U6BFR8C-H9
HMT125U6BFR8C-H9
KINGSTON KVR1333D3N9/2G
KINGSTON KVR1333D3N9/4G
MICRON
MT8JTF12864AZ-1G4F1
MICRON
MT9JSF12872AZ-1G4F1
MICRON
MICRON
MICRON
MICRON
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
PSC
PSC
MT8JTF12864AZ-1G4F1
MT16JF25664AZ-1G4F1
MT16JTF25664AZ-1G4F1
MT18JSF25672AZ-1G4F1
OCZ3RPX1333EB2GK
OCZ3RPX1333EB2GK
OCZ3G1333LV3GK
OCZ3P1333LV3GK
OCZ3P13332GK
OCZ3G13334GK
OCZ3G1333ULV4GK
OCZ3P1333LV4GK
OCZ3P1333LV6GK
OCZX1333LV6GK(XMP)
AL7F8G73D-DG1
AL8F8G73D-DG1
SAMSUNG M378B2873DZ1-CH9
SAMSUNG M378B2873EH1-CH9
SAMSUNG M391B2873DZ1-CH9
SAMSUNG M378B5673DZ1-CH9
SAMSUNG M378B5673EH1-CH9
SAMSUNG M391B5673DZ1-CH9
SAMSUNG M378B5273BH1-CH9
Super Talent W1333UX2GB(XMP)
Transcend
TS128MLK64V3U
Asint
SLY3128M8-EDJ
Transcend
Asint
Asint
Asint
ASUS
ATP
ATP
ATP
ATP
BUFFALO
BUFFALO
BUFFALO
TS256MLK64V3U
SLY3128M8-EDJE
SLZ3128M8-EDJ
SLZ3128M8-EDJE
N/A
AQ28M64A8BJH9S
AQ28M72D8BJH9S
AQ56M64B8BJH9S
AQ56M72E8BJH9S
FSX1333D3G-1G
FSH1333D3G-T3G(XMP)
FSX1333D3G-2G
EK Memory EKM324L28BP8-I13
Elixir
M2Y2G64CB8HA9N-CG
Patriot
PVT33G1333ELK
Patriot
Patriot
Patriot
Patriot
PDC32G1333LLK
PVS34G1333ELK
PVS34G1333LLK
PVT36G1333ELK
Silicon Power SP001GBLTU1333S01
Silicon Power SP001GBLTU133S02
Silicon Power SP002GBLTU133S02
ASUS P7H55D-M EVO
SS/ Chip
DS Brand
Chip NO.
Timing
6GB(3 x 2GB) DS -
-
9-9-9-24 1.5
4GB(2 x 2GB) DS -
-
7-7-7-24 1.5
H5TQ1G83BFR
9
4GB(2 x 2GB) DS GEIL
1GB
SS Hynix
2GB
DS Hynix
2GB
2GB
4GB
1GB
1GB
1GB
2GB
2GB
2GB
1GB
DS Hynix
DS Qimonda
H5TQ1G83BFR
9
-
H5TQ1G83BFRH9C 9
-
IDSH1G-03A1F1C-13H 9
SS MICRON
9FF22 D9KPT
9
SS MICRON
D9KPT(ECC)
9
DS MICRON
DS MICRON
DS MICRON
SS -
2GB(2 x 1GB) SS NANYA
3GB(3 x 1GB) SS 3GB(3 x 1GB) SS 1GB
GL1L128M88BA12N 9-9-9-24 1.3
DS SAMSUNG K4B2G0846B-HCH9 9
SS MICRON
DS -
4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 6GB(3 x 2GB) DS -
6GB(3 x 2GB) DS NA
D9KPT
D9KPT
9FF22 D9KPT
D9KPT(ECC)
-
1GB
SS PSC
1GB
SS SAMSUNG K4B1G0846D
2GB
1GB
1GB
2GB
2GB
2GB
4GB
DS PSC
A3P1GF3DGF
A3P1GF3DGF
SS SAMSUNG K4B1G0846E
SS SAMSUNG K4B1G0846D(ECC)
DS SAMSUNG K4B1G0846D
DS SAMSUNG K4B1G0846E
DS SAMSUNG K4B1G0846D(ECC)
-
1GB
SS SAMSUNG K4B1G0846D
1GB
SS Asint
DDRIII1208-DJ
DS Asint
DDRIII1208-DJ
2GB
1GB
2GB
2GB
1GB
1GB
1GB
2GB
2GB
1GB
DS SAMSUNG K4B1G0846D
SS ELPIDA
DS ELPIDA
DS -
J1108BASE-DJ-E
J1108BASE-DJ-E
-
SS SAMSUNG K4B1G0846E
SS SAMSUNG K4B1G0846D(ECC)
DS SAMSUNG K4B1G0846D
DS SAMSUNG K4B1G0846D(ECC)
SS -
-
2GB
DS -
-
2GB
DS -
3GB(3 x 1GB) SS 4GB(2 x 2GB) DS 1GB
SS PATRIOT
3GB(3 x 1GB) SS 4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 6GB(3 x 2GB) DS -
-
1GB
SS NANYA
2GB
DS S-POWER I0YT3E0
1GB
9
9
9
9
-
6-5-5
9-9-9
7-7-7
1.5
1.5
-
1.85
1.65
1.65
9
1.7
7-7-7
1.65
8-8-8
7-7-7
8-8-8
-
9
-
9
9
-
9
8
9
9
-
1.65
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
•
•
-
1.8
-
1.7
9-9-9-24 1.65
9-9-9-24 1.5
7-7-7-20 1.7
9-9-9-24 1.65
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
9
•
•
•
-
9
•
•
-
7
1 DIMM 2 DIMM 4 DIMM
•
-
9
DIMM socket support
(Optional)
1.6
1.65
7-7-7-20 -
NT5CB128M8AN-CG -
SS S-POWER I0YT3E0
-
7-7-7-20 -
DS SAMSUNG K4B2G0846B-HCH9 9
2GB(2 x 1GB) SS -
Voltage
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Chapter 2
Vendor
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2-17
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1067MHz capability for Lynnfield CPU at 2.66, 2.8 and 2.93Ghz
Vendor
Part No.
Size SS/ Chip Brand Chip NO.
DS
Timing Voltage
DIMM socket support
(Optional)
Crucial
CT12864BA1067.8FF
1GB SS MICRON
D9KPT
7
-
•
•
•
Crucial
CT12872BA1067.9FF
1GB SS MICRON
D9KPT(ECC)
7
-
•
•
•
Crucial
Crucial
Crucial
Crucial
ELPIDA
ELPIDA
ELPIDA
ELPIDA
ELPIDA
ELPIDA
Hynix
Hynix
Hynix
Chapter 2
Hynix
KINGSTON
KINGSTON
KINGSTON
KINGSTON
KINGSTON
MICRON
MICRON
MICRON
MICRON
MICRON
MICRON
MICRON
MICRON
SAMSUNG
Transcend
Asint
Asint
Elixir
WINTEC
2-18
CT12864BA1067.8SFD
CT25664BA1067.16FF
CT25664BA1067.16SFD
CT25672BA1067.18FF
EBJ10UE8BAW0-AE-E
EBJ10UE8EDF0-AE-F
EBJ11RD8BAFA-AE-E
EBJ11UD8BAFA-AG-E
EBJ21UE8BAW0-AE-E
EBJ21UE8EDF0-AE-F
HMT112U6AFP8C-G7N0
HYMT112U64ZNF8-G7
HMT125U6AFP8C-G7N0
HYMT125U64ZNF8-G7
KVR1066D3N7/1G
KVR1066D3N7/1G
KVR1066D3N7/2G
KVR1066D3N7/2G
KVR1066D3N7/4G
MT8JTF12864AY-1G1D1
MT8JTF12864AZ-1G1F1
MT8JTF12864AZ-1G1F1
MT9JSF12872AZ-1G1F1
1GB SS MICRON
2GB DS MICRON
2GB DS MICRON
2GB DS MICRON
1GB SS ELPIDA
1GB SS ELPIDA
1GB DS ELPIDA
1GB DS ELPIDA
2GB DS ELPIDA
2GB DS ELPIDA
1GB SS HYNIX
1GB SS HYNIX
2GB DS HYNIX
2GB DS HYNIX
J1108BABG-DJ-E
J1108EDSE-DJ-F
J5308BASE-AC-E(ECC)
J5308BASE-AC-E
J1108BABG-DJ-E
J1108EDSE-DJ-F
H5TQ1G83AFPG7C
HY5TQ1G831ZNFP-G7
H5TQ1G83AFPG7C
HY5TQ1G831ZNFP-G7
2GB DS ELPIDA
J1108BABG-DJ-E
1GB SS MICRON
7VD22
2GB DS KINGSTON D1288JEKAPGA7U
4GB DS SAMSUNG
1GB SS MICRON
1GB SS MICRON
1GB SS MICRON
MT18JSF25672AZ-1G1F1 2GB DS MICRON
M378B5273BH1-CF8
4GB DS SAMSUNG
SLY3128M8-EAE
1GB SS Asint
3DU3191A-10
D9KPT(ECC)
J1108BABG-DJ-E
MT16JTF25664AZ-1G1F1 2GB DS MICRON
M2Y2G64CB8HA9N-BE
D9JNL
1GB SS ELPIDA
MT16JTF25664AZ-1G1F1 2GB DS MICRON
SLZ3128M8-EAE
D9KPT
1GB SS KINGSTON D1288JEKAPA7U
MT16JTF25664AY-1G1D1 2GB DS MICRON
TS256MLK64V1U
D9JNL
2GB DS ELPIDA
2GB DS Asint
2GB DS -
1GB DS Qimonda
K4B2G0846B-HCF8
8ZF22 D9KPV
D9KPT
D9KPT(ECC)
7VD22
8ZF22 D9KPV
D9KPT
D9KPT(ECC)
K4B2G0846B-HCF8
J1108BABG-AE-E
DDRIII1208-AE
DDRIII1208-AE
-
IDSH51-03A1F1C-10F
7
7
7
7
7
-
7
8
7
-
7
7
7
7
7
-
7
-
7
7
7
7
7
7
7
7
8
7
-
7
-
1.5
1.5
1.5
1.5
1.5
-
1.5
-
1 DIMM 2 DIMM 4 DIMM
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Chapter 2: Hardware information
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1600MHz capability for Clarkdale CPU
DIMM socket support
(Optional)
Vendor
Part No.
Size
SS/ Chip Brand Chip NO. Timing
DS
A-DATA
AD31600G001GMU
1GB
SS
-
-
9-9-9-24 1.65~1.85 •
•
A-DATA
AX3U1600PB1G8-2P
2GB(2 x 1GB)
SS
-
-
8-8-8-24 1.65-1.85
•
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Crucial
Crucial
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
AX3U1600GB1G9-AG
AD31600E001GMU
AX3U1600GB1G9-3G
AX3U1600PB1G8-3P
AX3U1600GB2G9-AG(XMP)
AX3U1600XB2G7-EF(XMP)
AD31600F002GMU(XMP)
AX3U1600GB2G9-3G(XMP)
AX3U1600GB2G9-3G(XMP)
AX3U1600GB2G9-3G
AX3U1600XB2G7-FF(XMP)
TR3X3G1600C8D
TR3X3G1600C8DVer2.1(XMP)
TR3X3G1600C9Ver1.1(XMP)
CMD4GX3M2A1600C8(XMP)
CMG4GX3M2A1600C7(XMP)
CMX4GX3M2A1600C9(XMP)
TR3X6G1600C8D
TR3X6G1600C8DVer2.1(XMP)
TR3X6G1600C9Ver2.1(XMP)
CMD8GX3M4A1600C8(XMP)
CMX8GX3M4A1600C9(XMP)
BL12864BA1608.8SFB(XMP)
BL25664BN1608.16FF(XMP)
F3-12800CL9D-2GBNQ
F3-12800CL9D-4GBRL
F3-12800CL7D-4GBRH(XMP)
F3-12800CL8T-6GBPI(XMP)
F3-12800CL9T-6GBNQ
GV34GB1600C8DC
KINGSTON KHX1600C9D3K3/12GX(XMP)
KINGSTON KHX1600C8D3K2/4GX(XMP)
KINGSTON KHX1600C8D3K2/4GX(XMP)
KINGSTON KHX1600C8D3T1K2/4GX(XMP)
KINGSTON KHX1600C9D3K2/4G
KINGSTON KHX1600C9D3K3/6GX(XMP)
OCZ
OCZ3G1600LV3GK
OCZ
OCZ3OB1600LV4GK
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ3P1600LV3GK
OCZ3P1600LV4GK
OCZ3X16004GK(XMP)
OCZ3X1600LV4GK(XMP)
OCZ3FXE1600C7LV6GK
OCZ3G1600LV6GK
OCZ3G1600LV6GK
OCZ3X1600LV6GK(XMP)
OCZ3X1600LV6GK(XMP)
Super Talent WB160UX6G8(XMP)
Cell Shock
CS322271
Elixir
M2Y2G64CB8HA9N-DG(XMP)
Mushkin
998659(XMP)
EK Memory EKM324L28BP8-I16(XMP)
Mushkin
Patriot
PATRIOT
996657
PVT33G1600ELK
PGS34G1600LLKA
ASUS P7H55D-M EVO
2GB(2 x 1GB)
3GB(3 x 1GB)
3GB(3 x 1GB)
3GB(3 x 1GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
3GB(3 x 1GB)
3GB(3 x 1GB)
3GB(3 x 1GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
8GB(4 x 2GB)
8GB(4 x 2GB)
1GB
2GB
2GB(2 x 1GB)
2GB(2 x 1GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
4GB(2 x 2GB)
SS
SS
SS
SS
-
DS DS DS DS DS DS DS SS
-
SS
-
SS
-
DS DS DS DS DS DS DS DS SS
-
SS
-
DS SS
-
DS DS DS DS -
12GB(3 x 4GB) DS 4GB(2 x 2GB)
DS -
4GB(2 x 2GB)
DS -
4GB(2 x 2GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
3GB(3 x 1GB)
3GB(3 x 1GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
4GB(2 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
2GB(2 x 1GB)
4GB(2 x 2GB)
2GB
4GB(2 x 2GB)
6GB(3 x 2GB)
3GB(3 x 1GB)
4GB(2 x 2GB)
DS DS DS SS
SS
-
DS DS DS DS DS DS DS DS DS DS DS DS DS DS DS SS
-
DS -
-
1 DIMM 2 DIMM 4 DIMM
9-9-9-24 1.65~1.85 •
8-8-8-24 1.65-1.85
•
•
9-9-9-24 1.65~1.85 •
8-8-8-24 1.65-1.85
•
7-7-7-20 1.75-1.85
•
9-9-9-24 1.65~1.85 •
7-7-7-20 1.75-1.85
•
9-9-9-24 1.65~1.85 •
9-9-9-24 1.65~1.85 •
9-9-9-24 1.65~1.85 •
7-7-7-20 1.75-1.85
•
8-8-8-24 1.65
•
8-8-8-24 1.65
9-9-9-24 1.65
8-8-8-24 1.65
7-7-7-20 1.65
9-9-9-24 1.65
8-8-8-24 1.65
8-8-8-24 1.65
9-9-9-24 1.65
8-8-8-24 1.65
9-9-9-24 1.65
-
1.8
-
1.6
8-8-8-24 1.65
-
1.6
7-7-7-24 1.65
8-8-8-21 1.6~1.65
•
•
•
•
•
•
•
•
•
•
•
•
8
1.65
-
9
8-8-8
7-7-7
9-9-9
7-7-7
7-7-7
8-8-8
7-7-7
8-8-8
8-8-8
8-8-8
8-8-8
-
1.65
1.7~1.9
1.65
1.65
1.65
1.65
1.65
1.65
-
7-7-7-14 1.7-1.9
9
-
-
7-7-7-20 -
9-9-9-24 1.5-1.6
9-9-9-24 1.65
7-7-7-20 1.7
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.65
•
•
1.65
1.65
•
•
•
1.9
•
•
1.65
1.65
•
•
•
1.65
8
•
•
-
1.65
•
•
•
•
8
•
•
9-9-9-24 1.5-1.6
8-8-8-28 1.6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Chapter 2
A-DATA
Voltage
•
•
•
•
•
•
•
•
•
•
•
2-19
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1600MHz capability for Clarkdale CPU (cont.)
Vendor
Part No.
Size
SS/ Chip Brand Chip NO. Timing
DS
Patriot
PVS34G1600ELK
4GB(2 x 2GB)
DS -
-
9-9-9-24 1.8
Patriot
PVS34G1600LLKN
4GB(2 x 2GB)
DS -
-
7-7-7-20 2.0
Patriot
Patriot
Patriot
Patriot
PVS34G1600LLK(XMP)
PVT36G1600ELK
PVT36G1600ELK
PVT36G1600LLK(XMP)
4GB(2 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
6GB(3 x 2GB)
-
DS DS -
-
DS -
-
DS -
-
DIMM socket support
(Optional)
Voltage
1 DIMM 2 DIMM 4 DIMM
•
•
9-9-9-24 1.65
9-9-9-24 1.65
•
•
•
•
•
8-8-8-24 1.65
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1333MHz capability for Clarkdale CPU
•
•
•
Chapter 2
Vendor
Part No.
Size
SS/ Chip
DS Brand
Chip NO.
Timing
Voltage
DIMM socket support
(Optional)
A-DATA
AD3133301GOU
1GB
SS A-DATA
AD30908C8D-15IG
-
-
•
A-DATA
AD3U1333B2G9-2
2GB
DS A-DATA
AD30908C8D-15IG
-
-
A-DATA
A-DATA
A-DATA
A-DATA
A-DATA
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
CORSAIR
Crucial
Crucial
Crucial
Crucial
Crucial
Crucial
Crucial
Crucial
ELPIDA
ELPIDA
ELPIDA
ELPIDA
ELPIDA
ELPIDA
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
G.SKILL
GEIL
GEIL
Hynix
Hynix
Hynix
2-20
•
•
7-7-7-20 1.9
AD31333002GOU
AX3U1333PB2G7-2P
AD3U1333C4G9-B
AD31333E002G0U
AX3U1333PB2G7-3P
TR3X3G1333C9 (Ver2.1)
CM3X1024-1333C9DHX
BoxP/N:TWIN3X2048-1333C9
(CM3X1024-1333C9)Ver1.1
CM3X2G1333C9
2GB
DS A-DATA
4GB(2 x 2GB) DS 4GB
DS Hynix
6GB(3 x 2GB) DS 6GB(3 x 2GB) DS 3GB(3 x 1GB) SS 1GB
DS -
AD30908C8D-15IG
-
H5TQ2G83AFRH9C
-
1 DIMM 2 DIMM 4 DIMM
•
•
7-7-7-20 1.65-1.85 •
•
•
7-7-7-20 1.65-1.85 •
•
•
-
-
9-9-9-24 -
•
•
•
7-7-7-20 1.65-1.85 •
-
9-9-9-24 1.5
•
-
1.1
•
•
•
•
•
•
•
•
2GB(2 x 1GB) DS -
-
9-9-9-24 1.70
•
•
•
2GB
-
9-9-9-24 1.5
•
•
•
-
9-9-9-24 1.70
•
•
DS -
BoxP/N:TW3X4G1333C9DHX
(CM3X2048-1333C9DHX)Ver3.2 4GB(2 x 2GB) DS TR3X6G1333C9 (Ver2.1)
6GB(3 x 2GB) DS -
-
9-9-9-24 1.5
•
•
CT12864BA1339.8FF
1GB
SS MICRON
D9KPT
9
-
•
•
•
1GB
SS MICRON
D9KPT(ECC)
9
-
•
•
D9KPT
9
-
9
-
CMX8GX3M4A1333C9
CT12864BA1339.8SFD
CT12872BA1339.9FF
BL25664BN1337.16FF(XMP)
CT25664BA1339.16FF
CT25664BA1339.16SFD
CT25672BA1339.18FF
BL25664BA1336.16SFB1
EBJ10UE8BAW0-DJ-E
EBJ10UE8BDF0-DJ-F
EBJ10UE8EDF0-DJ-F
EBJ21UE8BAW0-DJ-E
EBJ21UE8BDF0-DJ-F
EBJ21UE8EDF0-DJ-F
F3-10600CL7D-2GBPI
F3-10600CL8D-2GBHK
F3-10666CL7T-6GBPK(XMP)
F3-10666CL7D-4GBPI(XMP)
F3-10666CL7D-4GBRH(XMP)
F3-10666CL8D-4GBHK(XMP)
F3-10666CL8D-4GBRM(XMP)
F3-10666CL9T-6GBNQ
GG34GB1333C9DC
GV34GB1333C7DC
HMT112U6BFR8C-H9
HMT125U6BFR8C-H9
HMT125U6BFR8C-H9
8GB(4 x 2GB) DS 1GB
2GB
2GB
2GB
2GB
SS MICRON
DS -
DS MICRON
DS MICRON
DS MICRON
4GB(2 x 2GB) DS NA
1GB
SS ELPIDA
1GB
SS ELPIDA
1GB
2GB
2GB
2GB
SS ELPIDA
DS ELPIDA
DS ELPIDA
DS ELPIDA
2GB(2 x 1GB) SS 2GB(2 x 1GB) SS 2GB
DS -
4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 6GB(3 x 2GB) DS -
4GB(2 x 2GB) DS GEIL
4GB(2 x 2GB) DS 1GB
SS Hynix
2GB
DS Hynix
2GB
DS Hynix
-
9-9-9-24 1.5
MT8JF12864AY-1G4D1 -
-
7-7-7-24 1.65
D9JNM
-
D9KPT(ECC)
-
-
6-6-6-20 1.8
J1108BABG-DJ-E
J1108BDSE-DJ-F
9
-
-
-
-
J1108EDSE-DJ-F
J1108BABG-DJ-E
9
J1108BDSE-DJ-F
-
J1108EDSE-DJ-F
-
-
-
-
-
-
-
1.65
1.65
7-7-7-18 1.5-1.6
-
7-7-7-21 1.5
-
7-7-7-21 1.5
-
8-8-8-21 1.5-1.6
-
8-8-8-21 1.5-1.6
-
9-9-9-24 1.5
GL1L128M88BA12N 9-9-9-24 1.3
-
7-7-7-24 1.5
H5TQ1G83BFR
9
H5TQ1G83BFR
H5TQ1G83BFRH9C
9
-
9
-
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Chapter 2: Hardware information
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1333MHz capability for Clarkdale CPU (cont.)
Vendor
Part No.
Size
SS/ Chip
DS Brand
Chip NO.
Timing
Voltage
DIMM socket support
(Optional)
KINGSTON
KVR1333D3N9/2G
2GB
DS Qimonda
9
1.5
•
•
•
KINGSTON
KVR1333D3N9/4G
4GB
IDSH1G-03A1F1C13H
DS SAMSUNG K4B2G0846B-HCH9
•
•
1GB
SS MICRON
9
•
MT8JTF12864AZ-1G4F1
9FF22 D9KPT
1.5
MICRON
SS MICRON
9
SS MICRON
D9KPT(ECC)
9
-
•
•
•
MICRON
MICRON
MICRON
MICRON
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
OCZ
PSC
PSC
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
SAMSUNG
MT8JTF12864AZ-1G4F1
MT9JSF12872AZ-1G4F1
MT16JF25664AZ-1G4F1
MT16JTF25664AZ-1G4F1
MT18JSF25672AZ-1G4F1
OCZ3RPX1333EB2GK
OCZ3G1333LV3GK
OCZ3P1333LV3GK
OCZ3P13332GK
OCZ3G1333ULV4GK
OCZ3P13334GK
OCZ3RPX1333EB4GK
OCZ3G1333LV6GK
OCZ3P1333LV6GK
OCZX1333LV6GK(XMP)
AL7F8G73D-DG1
AL8F8G73D-DG1
M378B2873DZ1-CH9
M378B2873EH1-CH9
M391B2873DZ1-CH9
M378B5673DZ1-CH9
M378B5673EH1-CH9
M391B5673DZ1-CH9
M378B5273BH1-CH9
Super Talent W1333UX2GB(XMP)
Transcend
TS128MLK64V3U
Asint
SLY3128M8-EDJ
Transcend
Asint
Asint
Asint
ASUS
ATP
ATP
ATP
ATP
BUFFALO
BUFFALO
BUFFALO
EK Memory
Elixir
Patriot
Patriot
Patriot
Patriot
Patriot
Silicon
Power
Silicon
Power
Silicon
Power
TS256MLK64V3U
SLY3128M8-EDJE
SLZ3128M8-EDJ
SLZ3128M8-EDJE
N/A
AQ28M64A8BJH9S
AQ28M72D8BJH9S
AQ56M64B8BJH9S
AQ56M72E8BJH9S
FSX1333D3G-1G
FSH1333D3G-T3G(XMP)
FSX1333D3G-2G
EKM324L28BP8-I13
M2Y2G64CB8HA9N-CG
PDC32G1333LLK
PVT33G1333ELK
PVS34G1333ELK
PVS34G1333LLK
PVT36G1333ELK
1GB
1GB
2GB
2GB
2GB
DS MICRON
DS MICRON
DS MICRON
2GB(2 x 1GB) SS NANYA
3GB(3 x 1GB) SS 3GB(3 x 1GB) SS 1GB
DS -
4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 6GB(3 x 2GB) DS 6GB(3 x 2GB) DS -
6GB(3 x 2GB) DS NA
D9KPT
D9KPT
9FF22 D9KPT
D9KPT(ECC)
-
1GB
SS PSC
1GB
SS SAMSUNG K4B1G0846D
2GB
1GB
1GB
2GB
2GB
2GB
4GB
DS PSC
A3P1GF3DGF
A3P1GF3DGF
SS SAMSUNG K4B1G0846E
SS SAMSUNG K4B1G0846D(ECC)
DS SAMSUNG K4B1G0846D
DS SAMSUNG K4B1G0846E
DS SAMSUNG K4B1G0846D(ECC)
DS SAMSUNG K4B2G0846B-HCH9
2GB(2 x 1GB) SS -
-
1GB
SS SAMSUNG K4B1G0846D
1GB
SS Asint
DDRIII1208-DJ
DS Asint
DDRIII1208-DJ
2GB
1GB
2GB
2GB
1GB
1GB
1GB
2GB
2GB
1GB
DS SAMSUNG K4B1G0846D
SS ELPIDA
DS ELPIDA
DS -
J1108BASE-DJ-E
J1108BASE-DJ-E
-
SS SAMSUNG K4B1G0846E
SS SAMSUNG K4B1G0846D(ECC)
DS SAMSUNG K4B1G0846D
DS SAMSUNG K4B1G0846D(ECC)
SS -
-
2GB
DS -
-
2GB
DS -
3GB(3 x 1GB) SS 4GB(2 x 2GB) DS 1GB
SS PATRIOT
3GB(3 x 1GB) SS 4GB(2 x 2GB) DS 4GB(2 x 2GB) DS 6GB(3 x 2GB) DS -
-
SP001GBLTU1333S01
1GB
SS NANYA
SP001GBLTU133S02
1GB
SS S-POWER I0YT3E0
SP002GBLTU133S02
2GB
DS S-POWER I0YT3E0
ASUS P7H55D-M EVO
9
9
9
9
6-5-5
9-9-9
7-7-7
-
1.85
1.65
1.65
7-7-7-20 8-8-8
1.65
-
1.85
7
9-9-9
7-7-7
8-8-8
-
9
-
9
9
-
9
9
8
9
9
-
1.8
1.65
1.65
1.6
-
•
•
•
•
•
•
•
-
-
-
1.7
9-9-9-24 1.65
9-9-9-24 1.5
7-7-7-20 1.7
9-9-9-24 1.65
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
•
•
•
9
-
•
•
•
9
-
•
NT5CB128M8AN-CG -
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
•
•
•
•
-
•
•
-
1.8
-
7
•
-
7-7-7-20 9
•
Chapter 2
MICRON
1 DIMM 2 DIMM 4 DIMM
2-21
P7H55D-M EVO Motherboard Qualified Vendors Lists (QVL)
DDR3-1067MHz capability for Clarkdale CPU
Vendor
Part No.
Size SS/
DS
Chip Brand Chip NO.
Crucial
CT12864BA1067.8FF
1GB SS
MICRON
D9KPT
Crucial
CT12872BA1067.9FF
1GB SS
MICRON
D9KPT(ECC)
Crucial
Crucial
Crucial
Crucial
ELPIDA
ELPIDA
ELPIDA
ELPIDA
ELPIDA
Hynix
Hynix
Hynix
Hynix
Chapter 2
KINGSTON
KINGSTON
KINGSTON
KINGSTON
MICRON
MICRON
MICRON
MICRON
MICRON
MICRON
MICRON
MICRON
SAMSUNG
Transcend
Asint
Asint
Elixir
WINTEC
CT12864BA1067.8SFD
CT25664BA1067.16FF
CT25664BA1067.16SFD
CT25672BA1067.18FF
EBJ10UE8BAW0-AE-E
EBJ10UE8EDF0-AE-F
EBJ11UD8BAFA-AG-E
EBJ21UE8BAW0-AE-E
EBJ21UE8EDF0-AE-F
HMT112U6AFP8C-G7N0
HYMT112U64ZNF8-G7
HMT125U6AFP8C-G7N0
HYMT125U64ZNF8-G7
KVR1066D3N7/1G
KVR1066D3N7/2G
KVR1066D3N7/2G
KVR1066D3N7/4G
MT8JTF12864AY-1G1D1
MT8JTF12864AZ-1G1F1
MT8JTF12864AZ-1G1F1
MT9JSF12872AZ-1G1F1
MT16JTF25664AY-1G1D1
MT16JTF25664AZ-1G1F1
MT16JTF25664AZ-1G1F1
MT18JSF25672AZ-1G1F1
M378B5273BH1-CF8
TS256MLK64V1U
SLY3128M8-EAE
SLZ3128M8-EAE
M2Y2G64CB8HA9N-BE
3DU3191A-10
1GB SS
2GB DS
2GB DS
2GB DS
1GB SS
1GB SS
1GB DS
2GB DS
2GB DS
1GB SS
1GB SS
2GB DS
2GB DS
1GB SS
2GB DS
2GB DS
4GB DS
1GB SS
1GB SS
1GB SS
1GB SS
2GB DS
2GB DS
2GB DS
2GB DS
4GB DS
2GB DS
1GB SS
2GB DS
2GB DS
1GB DS
MICRON
MICRON
MICRON
MICRON
ELPIDA
ELPIDA
ELPIDA
ELPIDA
ELPIDA
HYNIX
HYNIX
HYNIX
HYNIX
D9JNL
D9KPT
D9JNL
D9KPT(ECC)
J1108BABG-DJ-E
J1108EDSE-DJ-F
J5308BASE-AC-E
J1108BABG-DJ-E
J1108EDSE-DJ-F
H5TQ1G83AFPG7C
HY5TQ1G831ZNFP-G7
H5TQ1G83AFPG7C
HY5TQ1G831ZNFP-G7
KINGSTON D1288JEKAPA7U
KINGSTON D1288JEKAPGA7U
ELPIDA
J1108BABG-DJ-E
MICRON
7VD22
SAMSUNG
MICRON
MICRON
MICRON
MICRON
MICRON
MICRON
MICRON
SAMSUNG
ELPIDA
Asint
Asint
-
Qimonda
K4B2G0846B-HCF8
8ZF22 D9KPV
D9KPT
D9KPT(ECC)
7VD22
8ZF22 D9KPV
D9KPT
D9KPT(ECC)
K4B2G0846B-HCF8
J1108BABG-AE-E
DDRIII1208-AE
DDRIII1208-AE
-
IDSH51-03A1F1C-10F
DIMM socket support
Timing Voltage (Optional)
1 DIMM 2 DIMM 4 DIMM
7
-
•
•
7
-
•
•
7
-
7
-
7
-
7
-
7
-
-
-
8
-
7
-
-
-
7
-
7
-
7
7
-
7
1.5
7
1.5
-
1.5
-
1.5
7
-
7
-
7
-
7
-
7
-
7
-
7
-
7
-
8
1.5
7
-
-
-
-
-
-
-
7
-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Side(s): SS - Single-sided DS - Double-sided
DIMM support:
• 1 DIMM: Supports one (1) module inserted into any slot as Single-channel memory
configuration.
• 2 DIMMs: Supports two (2) modules inserted into either the blue slots or the black slots as one pair of Dual-channel memory configuration.
• 4 DIMMs: Supports four (4) modules inserted into both the blue and the black slots as two pairs of Dual-channel memory configuration.
•
ASUS exclusively provides hyper DIMM support function.
•
Based on Intel specification, you can only install one X.M.P. DIMM per channel.
•
•
•
2-22
Hyper DIMM support is subject to the physical characteristics of individual CPUs.
According to Intel CPU spec, CPUs with a core frequency of 2.66G support the
maximum DIMM frequency of up to DDR3-1333. To use DIMMs of a higher frequency
with a 2.66G CPU, enable the DRAM O.C. Profile feature in BIOS. Refer to section
3.5.1 Ai Overclock Tuner for details.
Visit the ASUS website for the latest QVL.
Chapter 2: Hardware information
2.4.3
Installing a DIMM
Ensure to unplug the power supply before adding or removing DIMMs or other system
components. Failure to do so may cause severe damage to both the motherboard and the
components.
1.
2.
Unlock a DIMM socket by pressing
the retaining clip outward.
DIMM notch
Align a DIMM on the socket such that
the notch on the DIMM matches the
DIMM slot key on the socket.
1
2
DIMM slot key
Unlocked retaining clip
3.
Hold the DIMM by both of its ends,
then insert the DIMM vertically into
the socket. Apply force to both ends
of the DIMM simultaneously until the
retaining clip snaps back into place,
and the DIMM cannot be pushed in
any further to ensure proper sitting of
the DIMM.
Chapter 2
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into
a socket in the wrong direction to avoid damaging the DIMM.
3
Locked Retaining Clip
Always insert the DIMM into the socket VERTICALLY to prevent DIMM notch damage.
2.4.4
1.
2.
Removing a DIMM
Press the retaining clip outward to
unlock the DIMM.
Remove the DIMM from the socket.
2
1
ASUS P7H55D-M EVO
2-23
2.5
Expansion slots
In the future, you may need to install expansion cards. The following subsections describe the
slots and the expansion cards that they support.
Ensure to unplug the power cord before adding or removing expansion cards. Failure to do
so may cause you physical injury and damage motherboard components.
2.5.1
Installing an expansion card
To install an expansion card:
1.
2.
Chapter 2
3.
4.
5.
6.
Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
Remove the system unit cover (if your motherboard is already installed in a chassis).
Remove the bracket opposite the slot that you intend to use. Keep the screw for later
use.
Align the card connector with the slot and press firmly until the card is completely
seated on the slot.
Secure the card to the chassis with the screw you removed earlier.
Replace the system cover.
2.5.2
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1.
2.
3.
Turn on the system and change the necessary BIOS settings, if any. See Chapter 3 for
information on BIOS setup.
Assign an IRQ to the card. Refer to the tables on the next page.
Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that
the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI
groups, making the system unstable and the card inoperable. Refer to the table on the next
page for details.
2-24
Chapter 2: Hardware information
2.5.3
Interrupt assignments
Standard interrupt assignments
Priority
0
1
Standard function
System Timer
1
2
Keyboard Controller
2
–
Redirect to IRQ#9
4
12
Communications Port (COM1)*
5
13
IRQ Holder for PCI Steering*
6
14
Reserved
7
15
Reserved
8
3
System CMOS/Real Time Clock
9
4
IRQ Holder for PCI Steering*
10
5
IRQ Holder for PCI Steering*
11
6
IRQ Holder for PCI Steering*
12
7
Reserved
13
8
Numeric Data Processor
14
9
Primary IDE Channel
Chapter 2
IRQ
* These IRQs are usually available for PCI devices.
IRQ assignments for this motherboard
PCIE x16_1
PCIE x1_1
PCIE x1_2
PCI_1
LAN
USB 2.0 Controller 1
USB 2.0 Controller 2
USB 3.0 Controller
Marvell 6111 Controller
SATA Host Controller
1394 Controller
HD Audio
ASUS P7H55D-M EVO
A
shared
shared
–
shared
–
–
shared
–
shared
–
–
–
B
–
–
shared
–
shared
–
–
–
–
–
–
–
C
–
–
–
–
–
–
–
–
–
shared
shared
–
D
–
–
–
–
–
–
–
shared
–
–
–
–
E
–
–
–
–
–
–
–
–
–
–
–
–
F
–
–
–
–
–
–
–
–
–
–
–
–
G
–
–
–
–
–
–
–
–
–
–
–
shared
H
–
–
–
–
–
shared
–
–
–
–
–
–
2-25
2.5.4
PCI slot
The PCI slot supports cards such as a LAN card, SCSI card, USB card, and other cards that
comply with PCI specifications. Refer to the figure below for the location of the slot.
2.5.5
PCI Express 2.0 x1 slots
This motherboard supports PCI Express 2.0 x1 network cards, SCSI cards and other cards
that comply with the PCI Express specifications. Refer to the figure below for the location of
the slots.
2.5.6
PCI Express 2.0 x16 slot
This motherboard has one PCI Express 2.0 x16 slot that supports PCI Express 2.0 x16
graphics card complying with the PCI Express specifications. Refer to the figure below for the
location of the slot.
Chapter 2
PCI slot 1
PCIe 2.0 x1_2 slot (2.5GT/s; gray slot)
PCIe 2.0 x16_1 slot
PCIe 2.0 x1_1 slot (2.5GT/s; gray slot)
2-26
Chapter 2: Hardware information
2.6
Jumper
Clear RTC RAM (3-pin CLRTC)
Chapter 2
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the
CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM
data. The onboard button cell battery powers the RAM data in CMOS, which include system
setup information such as system passwords.
To erase the RTC RAM
1.
2.
3.
4.
Turn OFF the computer and unplug the power cord.
Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3 for
about 5–10 seconds, then move the cap back to pins 1-2.
Plug the power cord and turn ON the computer.
Hold down the <Del> key during the boot process and enter BIOS setup to
re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
•
If the steps above do not help, remove the onboard battery and move the jumper again
to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery.
•
You do not need to clear the RTC when the system hangs due to overclocking. For
system failure due to overclocking, use the C.P.R. (CPU Parameter Recall) feature.
Shut down and reboot the system so the BIOS can automatically reset parameter
settings to default values.
•
Due to the chipset behavior, AC power off is required to enable C.P.R. function. You
must turn off and on the power supply or unplug and plug the power cord before
rebooting the system.
ASUS P7H55D-M EVO
2-27
2.7
Onboard switch
The onboard switch allows you to fine-tune performance when working on a bare or open-case
system. This is ideal for overclockers and gamers who continually change settings to enhance
system performance.
MemOK! switch
Installing DIMMs that are incompaible with the motherboard may cause system boot failure,
and the DRAM_LED near the MemOK! switch lights continuously. Press and hold the
MemOK! switch until the DRAM_LED starts blinking to begin automatic memory compatibility
tuning for successful boot.
Chapter 2
2-28
•
Refer to section 2.9 Onboard LEDs for the exact location of the DRAM_LED.
•
The DRAM_LED also lights when the DIMM is not properly installed. Turn off the
system and reinstall the DIMM before using the MemOK! function.
•
The MemOK! switch does not function under Windows® OS environment.
•
During the tuning process, the system loads and tests failsafe memory settings. It
takes about 30 seconds for the system to test one set of failsafe settings. If the test
fails, the system reboots and test the next set of failsafe settings. The blinking speed
of the DRAM_LED increases, indicating different test processes.
•
Due to memory tuning requirement, the system automatically reboots when each
timing set is tested. If the installed DIMMs still fail to boot after the whole tuning
process, the DRAM_LED lights continuously. Replace the DIMMs with ones
recommended in the Memory QVL (Qualified Vendors Lists) in this user manual or on
the ASUS website at www.asus.com.
•
If you turn off the computer and replace DIMMs during the tuning process, the system
continues memory tuning after turning on the computer. To stop memory tuning, turn
off the computer and unplug the power cord for about 5–10 seconds.
•
If your system fail to boot due to BIOS overclocking, press the MemOK! switch to boot
and load BIOS default settings. A messgae will appear during POST reminding you
that the BIOS has been restored to its default settings.
•
We recommend that you download and update to the latest BIOS version from the
ASUS website at www.asus.com after using the MemOK! function.
Chapter 2: Hardware information
Connectors
2.8.1
Rear panel connectors
Chapter 2
2.8
Rear panel connectors
1.
PS/2 keyboard port (purple)
7.
HDMI out port***
2.
Optical S/PDIF Out port
8.
DVI out pot
3.
VGA out port
9.
IEEE 1394a port
4.
USB 2.0 ports 3 and 4
10. External SATA port
5.
LAN (RJ-45) port*
11. USB 3.0 ports 1 and 2
6.
USB 2.0 ports 5 and 6
12. Audio I/O ports**
*and **: Refer to the tables on the next page for LAN port and audio port definitions.
***: Refer to the notes and troubleshooting on monitor overscan / underscan problem on the next pages.
DO NOT insert a different connector to the external SATA port.
ASUS P7H55D-M EVO
2-29
* LAN port LED indications
ACT/LINK SPEED
LED
LED
Activity Link LED
Speed LED
Status
Description
Status
Description
OFF
No link
OFF
10 Mbps connection
ORANGE
Linked
ORANGE
100 Mbps connection
BLINKING
Data activity
GREEN
1 Gbps connection
LAN port
** Audio 2, 4, 6, or 8-channel configuration
Headset
2-channel
Port
Chapter 2
2-30
4-channel
6-channel
8-channel
Light Blue
Line In
Line In
Line In
Line In
Lime
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
Pink
Mic In
Mic In
Mic In
Mic In
Orange
–
–
Center/Subwoofer
Center/Subwoofer
Black
–
Rear Speaker Out
Rear Speaker Out
Rear Speaker Out
Gray
–
–
–
Side Speaker Out
•
This motherboard comes with multiple VGA output that features desktop extension on
two monitors. You can connect two monitors to any two of the onboard VGA, DVI-D,
and HDMI ports. Note that DVI-D/HDMI dual output works in OS environment only and
that during POST or BIOS setup, only DVI-D output is valid.
•
Due to the Intel® VGA driver issue, the Windows® Display Settings menu may offer
some resolution options that your monitor does not support. When you set a resolution
not supported by your monitor, it will black out. If this happens, wait 15 seconds for the
system to return to its original setting or restart the system and press F8 to enter Safe
Mode. In Safe Mode, change the display setting to 800 x 600, and then restart the
system to adjust the monitor resolution from the Windows® Display Settings menu.
•
Due to the Intel® driver issue, some monitor resolution settings will lead to monitor
overscan or underscan. Refer to the next page for the troubleshooting on monitor
overscan/underscan problem
•
Playback of Blu-Ray Discs
The speed and bandwidth of the CPU/Memory, DVD player, and drivers will affect
the playback quality. Using the CPU/Memory of higher speed and bandwidth with the
higher-version DVD player and drivers will upgrade the playback quality.
•
To play Blu-Ray Disc, make sure to use an HDCP compliant monitor.
•
You can only play Blu-Ray Disc under Windows® Vista™ / 7™ OS.
Chapter 2: Hardware information
Troubleshooting on monitor overscan / underscan problem
2.
Install Intel Graphics Accelerator Driver
from the motherboard support DVD.
From the Windows® notification area,
double-click the Intel(R) Graphics Media
Accelerator Driver icon and click Graphics
Properties.
3.
Click Display > General Settings
and select a Resolution. Click
Apply.
4.
Or you can click Display > General
Settings > Scaling > Customize
Aspect Ratio. Move the Horizontal
Scaling and Vertical Scaling sliders
and then click Apply.
ASUS P7H55D-M EVO
Chapter 2
1.
2-31
2.8.2
Audio I/O connections
Audio I/O ports
Connect to Headphone and Mic
Chapter 2
Connect to Stereo / 2.1-channel Speakers
2-32
Chapter 2: Hardware information
Connect to 4.1 channel Speakers
Chapter 2
Connect to 5.1 channel Speakers
Connect to 7.1 channel Speakers
ASUS P7H55D-M EVO
2-33
2.8.3
1.
Internal connectors
IDE connector (40-1 pin PRI_EIDE)
The onboard IDE connector is for the Ultra DMA 133/100/66 signal cable. There are
three connectors on each Ultra DMA 133/100/66 signal cable: blue, black, and gray.
Connect the blue connector to the motherboard’s IDE connector, then select one of the
following modes to configure your device.
Chapter 2
Drive jumper setting
Single device
Cable-Select or Master
Cable-Select
Two devices
Mode of device(s)
Cable connector
-
Black
Master
Black
Slave
Gray
Master
Master
Slave
Slave
Black or gray
•
Pin 20 on the IDE connector is removed to match the covered hole on the Ultra DMA
cable connector. This prevents incorrect insertion when you connect the IDE cable.
•
Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE devices.
If any device jumper is set as “Cable-Select”, ensure that all other device jumpers have the
same setting.
2-34
Chapter 2: Hardware information
Intel® H55 Serial ATA connectors (7-pin SATA 1-6 [blue])
These connectors are for the Serial ATA signal cables for Serial ATA hard disk drives
and optical disc drives.
Chapter 2
2.
You must install Windows® XP Service Pack 2 or later version before using Serial ATA hard
disk drives.
ASUS P7H55D-M EVO
2-35
3.
Serial port connector (10-1 pin COM1)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
Chapter 2
The COM module is purchased separately.
4.
IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage the
motherboard!
The IEEE 1394a module is purchased separately.
2-36
Chapter 2: Hardware information
USB connectors (10-1 pin USB78; USB910; USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
Chapter 2
5.
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard if your chassis supports
front panel USB ports.
The USB module is purchased separately.
ASUS P7H55D-M EVO
2-37
6.
CPU, chassis, and power fan connectors
(4-pin CPU_FAN; 4-pin CHA_FAN1; 3-pin PWR_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
Chapter 2
Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
2-38
•
The CPU_FAN connector supports the CPU fan of maximum 2A (24 W) fan power.
•
Only the CPU_FAN and CHA_FAN1 connectors support the ASUS Fan Xpert feature.
Chapter 2: Hardware information
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot opening
at the back of the system chassis.
Chapter 2
7.
The S/PDIF module is purchased separately.
8.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector, set
the Front Panel Type item in the BIOS setup to [HD Audio]; if you want to connect an
AC'97 front panel audio module to this connector, set the item to [AC97]. By default,
this connector is set to [HD Audio].
ASUS P7H55D-M EVO
2-39
9.
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
Chapter 2
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
•
Do not forget to connect the 8-pin EATX12 V power plug; otherwise, the system will
not boot.
•
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.asus.
com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.
Seventeam ST-522HLP
Seventeam ST550EAJ-05F
ASUS P-50GA
ASUS P-55GA
PSU suggested list
T.C.STAR D420
OCZ ELITEXSTREAM 1000
Seasonic SS-900HP
Snake PSH850V
CoolerMaster RS-750
CWT PSH650V-D
CWT PSH750V-D
Delta GPS-350AB
ASUS U-75HA
Silverstone ZM1200M
EnerMAX ELT500AWT
ASUS U-65GA
AXE-AA1000U-C
2-40
Be quiet P6-PRO-850W
Be quiet BN077
CoolerMaster RS-850EMBA
Corsair CMPSU-620HX
Corsair HX1000W
EnerMAX EGX1000EWL
HECHUAN ST-ATX330
Seasonic SS-460HS
Seasonic SS-500GB
Seasonic SS-500HM
Seasonic SS-550HT
Seasonic SS-600HT
Silverstone SST-ST85F
Tagan TG1100-U33
Thermaltake W0132RE
Thermaltake W0133RU
Thermaltake W0171
AcBel API4PC24
Aelta GPS-550AB
Be quiet BN073
CoolerMaster RS-650
Seventeam ST-420BKP
Snake PSH500V
Silverstone SST-ST50EF
Silverstone PSU ST56ZF
EnerMAX EG495AX-VE (E)(24P)
FSP FSP500-60GLN
Gigabyte M550A-D1
Gigabyte P610A-C1
GoldenField ATX-S398
GoldenField ATX-S550
I-cuteAP-600S
OCZ OCZ780MXS
Seasonic SS-351HT
Thermaltake TWV500W-AP
Thermaltake PUREPower-600AP
Zippy HP2-6500PE (G1)
Zippy PSL6720P
Chapter 2: Hardware information
This connector supports several chassis-mounted functions.
•
System power LED (2-pin PLED)
Chapter 2
10. System panel connector (20-8 pin PANEL)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
•
Hard disk drive activity LED (2-pin IDE_LED)
•
System warning speaker (4-pin SPEAKER)
•
ATX power button/soft-off button (2-pin PWRSW)
•
Reset button (2-pin RESET)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
This 4-pin connector is for the chassis-mounted system warning speaker. The speaker
allows you to hear system beeps and warnings.
This connector is for the system power button. Pressing the power button turns the
system on or puts the system in sleep or soft-off mode depending on the BIOS settings.
Pressing the power switch for more than four seconds while the system is ON turns the
system OFF.
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
ASUS P7H55D-M EVO
2-41
2.8.4.
ASUS Q-Connector (system panel)
Use the ASUS Q-Connector to connect/disconnect the chassis front panel cables.
To install the ASUS Q-Connector:
1.
Connect the front panel cables to the ASUS
Q-Connector.
Refer to the labels on the Q-Connector to
know the detailed pin definitions, and then
match them to their respective front panel
cable labels.
The labels on the front panel cables
may vary depending on the chassis
model.
Chapter 2
2-42
2.
Install the ASUS Q-Connector to the system
panel connector, ensuring the orientation
matches the labels on the motherboard.
3.
The front panel functions are now enabled.
The figure shows the Q-Connector is properly
installed on the motherboard.
IDE_LED+
IDE_LED-
PWR
Ground
Reset
Ground
IDE_LED
R SW
POWE
W
S
RESET
Chapter 2: Hardware information
2.9
Standby Power LED
The motherboard comes with a standby power LED. The green LED lights up to
indicate that the system is ON, in sleep mode, or in soft‑off mode. This is a reminder
that you should shut down the system and unplug the power cable before removing or
plugging in any motherboard component. The illustration below shows the location of
the onboard LED.
Chapter 2
1.
Onboard LEDs
2.
DRAM LED
DRAM LED checks the DRAM in sequence during motherboard booting process. If an
error is found , the LED next to the error device will continue lighting until the problem is
solved. This user-friendly design provides an intuitional way to locate the root problem
within a second.
ASUS P7H55D-M EVO
2-43
2.10 Starting up for the first time
1.
After making all the connections, replace the system case cover.
3.
Connect the power cord to the power connector at the back of the system chassis.
2.
4.
5.
6.
Chapter 2
7.
Be sure that all switches are off.
Connect the power cord to a power outlet that is equipped with a surge protector.
Turn on the devices in the following order:
a.
Monitor
c.
System power
b.
External SCSI devices (starting with the last device on the chain)
After applying power, the system power LED on the system front panel case lights up.
For systems with ATX power supplies, the system LED lights up when you press the
ATX power button. If your monitor complies with the “green” standards or if it has a
“power standby” feature, the monitor LED may light up or change from orange to green
after the system LED turns on.
The system then runs the power-on self tests or POST. While the tests are running, the
BIOS beeps (see the BIOS beep codes table below) or additional messages appear on
the screen. If you do not see anything within 30 seconds from the time you turned on
the power, the system may have failed a power-on test. Check the jumper settings and
connections or call your retailer for assistance.
BIOS Beep
Description
One short beep
VGA detected
Quick boot set to disabled
No keyboard detected
One continuous beep followed by two short
beeps then a pause (repeated)
No memory detected
One continuous beep followed by three short
beeps
No VGA detected
One continuous beep followed by four short
beeps
Hardware component failure
At power on, hold down the <Delete> key to enter the BIOS Setup. Follow the
instructions in Chapter 3.
2.11 Turning off the computer
While the system is ON, pressing the power switch for less than four seconds puts the system
on sleep mode or soft-off mode, depending on the BIOS setting. Pressing the power switch
for more than four seconds lets the system enter the soft-off mode regardless of the BIOS
setting. Refer to section 3.7 Power menu in Chapter 3 for details.
2-44
Chapter 2: Hardware information
Chapter 3
Chapter 3:
3.1
BIOS setup
Knowing BIOS
BIOS (Basic Input and Output System) stores system hardware settings such as storage
device configuration, overclocking settings, advanced power management, and boot device
configuration that are needed for system startup in the motherboard CMOS. In normal
circumstances, the default BIOS settings apply to most conditions to ensure optimum
performance. We recommend that you not change the default BIOS settings except in
the following circumstances:
•
•
An error message appears on the screen during the system bootup and requests you to
run the BIOS Setup.
You have installed a new system component that requires further BIOS settings or
update.
Inappropriate settings of the BIOS may result to instability or failure to boot. We strongly
recommend that you change the BIOS settings only with the help of a trained service
personnel.
3.2
Updating BIOS
The ASUS website publishes the latest BIOS versions to provide enhancements on system
stability, compatibility, or performance. However, BIOS updating is potentially risky. If there
is no problem using the current version of BIOS, DO NOT manually update the BIOS.
Inappropriate BIOS updating may result in the system’s failure to boot. Carefully follow the
instructions of this chapter to update your BIOS if necessary.
Chapter 3
Visit the ASUS website (www.asus.com) to download the latest BIOS file for this
motherboard.
The following utilities allow you to manage and update the motherboard BIOS setup program.
1.
ASUS Update: Updates the BIOS in Windows® environment.
3.
ASUS CrashFree BIOS 3 utility: Restores the BIOS using the motherboard support
DVD or a USB flash drive when the BIOS file fails or gets corrupted.
2.
4.
ASUS EZ Flash 2: Updates the BIOS using a USB flash drive.
ASUS BIOS Updater: Updates and backups the BIOS in DOS environment using the
motherboard support DVD and a USB flash disk drive.
Refer to the corresponding sections for details on these utilities.
Save a copy of the original motherboard BIOS file to a USB flash disk in case you need
to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS
Update utility.
ASUS P7H55D-M EVO
3-1
3.2.1
ASUS Update utility
The ASUS Update is a utility that allows you to manage, save, and update the motherboard
BIOS in Windows® environment. The ASUS Update utility allows you to:
•
Save the current BIOS file
•
Update the BIOS from an updated BIOS file
•
•
•
Download the latest BIOS file from the Internet
Update the BIOS directly from the Internet
View the BIOS version information
This utility is available in the support DVD that comes with the motherboard package.
ASUS Update requires an Internet connection either through a network or an Internet
Service Provider (ISP).
Installing ASUS Update
To install ASUS Update:
1.
Place the support DVD in the optical drive.
3.
The ASUS Update utility is copied to your system.
2.
From the Main menu, click the Utilities tab, then click Install ASUS Update VX.XX.XX.
Quit all Windows® applications before you update the BIOS using this utility.
Updating the BIOS through the Internet
Chapter 3
To update the BIOS through the Internet:
1.
3-2
From the Windows® desktop, click
Start > Programs > ASUS >
ASUSUpdate > ASUSUpdate. The
ASUS Update main window appears.
2.
Select Update BIOS from the
Internet from the drop‑down menu,
and then click Next.
Chapter 3: BIOS setup
3.
Select the ASUS FTP site nearest
you to avoid network traffic, or click
Auto Select. Click Next.
4.
From the FTP site, select the BIOS
version that you wish to download. Click
Next.
5.
Follow the onscreen instructions to complete the update process.
The ASUS Update utility is capable of updating itself through the Internet. Always update
the utility to avail all its features.
Updating the BIOS through a BIOS file
To update the BIOS through a BIOS file:
2.
Fom the Windows® desktop, click
Start > Programs > ASUS >
ASUSUpdate > ASUSUpdate. The
ASUS Update main window appears.
Select Update BIOS from a file
from the dropdown menu, then click
Next.
3.
4.
Locate the BIOS file from the Open
window, then click Open.
Chapter 3
1.
Follow the onscreen instructions to
complete the update process.
P7H55DME.ROM
P7H55DME
Ensure to load the BIOS default
settings to ensure system
compatibility and stability. Select the
Load Setup Defaults item under
the Exit menu. See section 3.10 Exit
Menu for details.
ASUS P7H55D-M EVO
3-3
3.2.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a
bootable floppy disk or an OS‑based utility.
Before you start using this utility, download the latest BIOS from the ASUS website
at www.asus.com.
To update the BIOS using EZ Flash 2:
1.
Insert the USB flash disk that contains the latest BIOS file to the USB port, and then
launch EZ Flash 2 in any of these two ways:
•
•
Press <Alt> + <F2> during POST to display the following.
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash 2 and
press <Enter> to enable it.
ASUSTek EZ Flash 2 BIOS ROM Utility V4.10
FLASH TYPE: MXIC 25L1605A
Current ROM
BOARD: P7H55D-M EVO
VER: 0115
DATE: 10/28/2009
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
A:
Chapter 3
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
2.
[Tab] Switch
[B] Backup
[V] Drive Info
[Esc] Exit
Press <Tab> to switch between drives until the correct BIOS file is found. When
the correct BIOS file is found, EZ Flash 2 performs the BIOS update process and
automatically reboots the system when done.
•
This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.
•
DO NOT shut down or reset the system while updating the BIOS to prevent system
boot failure!
Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
the Load Setup Defaults item under the Exit menu. See section 3.10 Exit Menu for
details.
3-4
Chapter 3: BIOS setup
3.2.3
ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the
BIOS file when it fails or gets corrupted during the updating process. You can restore a
corrupted BIOS file using the motherboard support DVD or a USB flash drive that contains
the BIOS file.
The BIOS file in the motherboard support DVD may be older than the BIOS file published
on the ASUS official website. If you want to use the newer BIOS file, download the file at
support.asus.com and save it to a USB flash drive.
Recovering the BIOS
To recover the BIOS:
1.
2.
3.
4.
5.
Turn on the system.
Insert the motherboard support DVD to the optical drive, or the USB flash drive
containing the BIOS file to the USB port.
The utility automatically checks the devices for the BIOS file. When found, the utility
reads the BIOS file and starts flashing the corrupted BIOS file.
Turn off the system after the utility completes the updating process and power on
again.
The system requires you to enter BIOS Setup to recover BIOS setting. To ensure
system compatibility and stability, we recommend that you press <F2> to load default
BIOS values.
Chapter 3
DO NOT shut down or reset the system while updating the BIOS! Doing so can cause
system boot failure!
ASUS P7H55D-M EVO
3-5
3.2.4
ASUS BIOS Updater
The ASUS BIOS Updater allows you to update BIOS in DOS environment. This utility also
allows you to copy the current BIOS file that you can use as a backup when the BIOS fails or
gets corrupted during the updating process.
The succeeding utility screens are for reference only. The actual utility screen displays may
not be same as shown.
Before updating BIOS
1.
2.
3.
Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and
single partition.
Download the latest BIOS file and BIOS Updater from the ASUS website at http://
support.asus.com and save them on the USB flash drive.
•
NTFS is not supported under DOS environment. Do not save the BIOS file and BIOS
Updater to a hard disk drive or USB flash drive in NTFS format.
•
Do not save the BIOS file to a floppy disk due to low disk capacity.
Turn off the computer and disconnect all SATA hard disk drives (optional).
Booting the system in DOS environment
1.
2.
Insert the USB flash drive with the latest BIOS file and BIOS Updater to the USB port.
Boot your computer. When the ASUS Logo appears, press <F8> to show the BIOS
Boot Device Select Menu. Insert the support DVD into the optical drive and select the
optical drive as the boot device.
Chapter 3
Please select boot device:
SATA:XXXXXXXXXXXXXXXX
CDROM:XXXXXXXXXXXXXXX
USB:XXXXXXXXXXXXXXXXX
Network:XXXXXXXXXXXXX
↑ and ↓ to move selection
ENTER to select boot device
ESC to boot using defaults
3. 4.
When the Make Disk menu appears, select the FreeDOS command prompt item by
pressing the item number.
At the FreeDOS prompt, type d: and press <Enter> to switch the disk from
Drive C (optical drive) to Drive D (USB flash drive).
Welcome to FreeDOS (http://www.freedos.org)!
C:\>d:
D:\>
3-6
Chapter 3: BIOS setup
Backing up the current BIOS
To backup the current BIOS file using the BIOS Updater
Ensure that the USB flash drive is not write-protected and has enough free space to save
the file.
1.
At the FreeDOS prompt, type bupdater /o[filename] and press <Enter>.
D:\>bupdater /oOLDBIOS1.rom
Filename Extension
The [filename] is any user-assigned filename with no more than eight alphanumeric
characters for the filename and three alphanumeric characters for the extension.
2.
The BIOS Updater backup screen appears indicating the BIOS backup process. When
BIOS backup is done, press any key to return to the DOS prompt.
ASUSTek BIOS Updater for DOS V1.00b [09/06/22]
FLASH TYPE: MXIC 25L1605A
Current ROM
BOARD: P7H55D-M EVO
VER: 0115
DATE: 10/28/2009
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
Chapter 3
BIOS backup is done! Press any key to continue.
Note
Saving BIOS:
ASUS P7H55D-M EVO
3-7
Updating the BIOS file
To update the BIOS file using BIOS Updater
1.
At the FreeDOS prompt, type bupdater /pc /g and press <Enter>.
D:\>bupdater /pc /g
2.
The BIOS Updater screen appears as below.
ASUSTek BIOS Updater for DOS V1.00b [09/06/22]
FLASH TYPE: MXIC 25L1605A
Current ROM
BOARD: P7H55D-M EVO
VER: 0115
DATE: 10/28/2009
Update ROM
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
P7H55DME.ROM
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
3.
2097152 2009-08-06 17:30:48
[Tab] Switch
[B] Backup
[V] Drive Info
[Esc] Exit
Press <Tab> to switch between screen fields and use the <Up/Down/Home/End> keys
to select the BIOS file and press <Enter>. BIOS Updater checks the selected BIOS file
and prompts you to confirm BIOS update.
Chapter 3
Are you sure to update BIOS?
Yes
4.
No
Select Yes and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS
Updater. Restart your computer.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
3-8
•
For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS
prompt after updating BIOS.
•
Ensure to load the BIOS default settings to ensure system compatibility and stability.
Select the Load Setup Defaults item under the Exit BIOS menu. See Chaper 3 of
your motherboard user manual for details.
•
Ensure to connect all SATA hard disk drives after updating the BIOS file if you have
disconnected them.
Chapter 3: BIOS setup
3.3
BIOS setup program
A BIOS Setup program is provided for BIOS item modification. When you start up the
computer, the system provides you with the opportunity to run this program. Press <Del>
during the Power-On Self-Test (POST) to enter the Setup utility. Otherwise, POST continues
with its test routines.
If you wish to enter Setup after POST, restart the system by pressing <Ctrl> + <Alt> + <Delete>,
or by pressing the reset button on the system chassis. You can also restart by turning the
system off and then back on. Do this last option only if the first two failed.
The Setup program is designed to make it as easy to use as possible. Being a menu-driven
program, it lets you scroll through the various submenus and select from the available options
using the navigation keys.
The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.
•
If the system becomes unstable after changing any BIOS setting, load the default
settings to ensure system compatibility and stability. Select the Load Setup Defaults
item under the Exit menu. See section 3.10 Exit Menu for details.
•
If the system fails to boot after changing any BIOS setting, try to clear the CMOS and
reset the motherboard to the default value. See section 2.6 Jumper for details.
BIOS menu screen
Menu items
Main
Menu bar
Ai Tweaker
System Time
System Date
Language
SATA1
SATA2
SATA3
SATA4
SATA5
SATA6
Configuration fields
BIOS SETUP UTILITY
Advanced
Power
Boot
General help
Tools
Exit
[13:51:25]
[Wed 11/04/2009]
[English]
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
[HDT722516DLA380]
[Not Detected]
[ATAPI DVD DH1]
[Not Detected]
[Not Detected]
[Not Detected]
Use [+] or [-] to
configure system Date.
Storage Configuration
System Information
←→
↑↓
+Tab
F1
F10
ESC
Chapter 3
3.3.1
•
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Submenu items
3.3.2
Navigation keys
Menu bar
The menu bar on top of the screen has the following main items:
Main
Ai Tweaker
For changing the basic system configuration
For changing the overclocking settings
Advanced
For changing the advanced system settings
Power
For changing the advanced power management (APM) configuration
Boot
For changing the system boot configuration
Tools
For configuring options for special functions
Exit
For selecting the exit options and loading default settings
ASUS P7H55D-M EVO
3-9
3.3.3
Navigation keys
At the bottom right corner of a menu screen are the navigation keys for that particular menu.
Use the navigation keys to select items in the menu and change the settings.
The navigation keys may differ from one screen to another.
3.3.4
Menu items
The highlighted item on the menu bar displays the specific items for that menu. For example,
selecting Main shows the Main menu items.
The other items (Ai Tweaker, Advanced, Power, Boot, Tools, and Exit) on the menu bar have
their respective menu items.
3.3.5
Submenu items
A solid triangle before each item on any menu screen means that the item has a submenu. To
display the submenu, select the item and press <Enter>.
3.3.6
Configuration fields
These fields show the values for the menu items. If an item is user-configurable, you can
change the value of the field opposite the item. You cannot select an item that is not
user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To change the
value of a field, select it and press <Enter> to display a list of options. Refer to 3.3.7 Pop-up
window.
Chapter 3
3.3.7
Pop-up window
Select a menu item and press <Enter> to
display a pop-up window with the configuration
options for that item.
3.3.8
BIOS SETUP UTILITY
Advanced
Power
Boot
Ai Tweaker
Suspend Mode
ACPI Version Features
ACPI APIC support
Tools
Exit
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
[Auto]
[Disabled]
[Enabled]
Disabled
Enabled
Use [+] or [-] to
configure system Time.
APM Configuration
Hardware Monitor
Scroll bar
A scroll bar appears on the right side of a
menu screen when there are items that do not
fit on the screen. Press the Up/Down arrow
keys or <Page Up> / <Page Down> keys to
display the other items on the screen.
3.3.9
Main
←→
↑↓
+-
Tab
F1
F10
ESC
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Scroll bar
Pop-up window
General help
At the top right corner of the menu screen is a brief description of the selected item.
3-10
Chapter 3: BIOS setup
3.4
Main menu
When you enter the BIOS Setup program, the Main menu screen appears, giving you an
overview of the basic system information. Select an item and press <Enter> to display the
submenu.
Refer to section 3.3.1 BIOS menu screen for information on the menu screen items and
how to navigate through them.
Main
Ai Tweaker
System Time
System Date
Language
SATA1
SATA2
SATA3
SATA4
SATA5
SATA6
BIOS SETUP UTILITY
Advanced
Power
Boot
Tools
Exit
[13:51:25]
[Wed 11/04/2009]
[English]
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
[HDT722516DLA380]
[Not Detected]
[ATAPI DVD DH1]
[Not Detected]
[Not Detected]
[Not Detected]
Use [+] or [-] to
configure system Date.
←→
↑↓
+Tab
F1
F10
ESC
Storage Configuration
System Information
Select Screen
Select Item
Change Field
Select Field
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.4.1
SATA 1–6
Chapter 3
While entering Setup, the BIOS automatically detects the presence of SATA devices. There
is a separate submenu for each SATA device. Select a device item and press <Enter> to
display the SATA device information.
BIOS SETUP UTILITY
Main
SATA 1
Device
: Hard Disk
Vendor
: HDT722516DLA380
Size
: 164.7GB
LBA Mode
: Supported
Block Mode
: 16Sectors
PIO Mode
: 4
Async DMA
: MultiWord DMA-2
Ultra DMA
: Ultra DMA-6
SMART Monitoring:Supported
Type [Auto]
LBA/Large Mode [Auto]
Block(Multi-sector Transfer)M
[Auto]
PIO Mode [Auto]
DMA Mode [Auto]
SMART Monitoring [Auto]
32Bit Data Transfer [Enabled]
Select the type
of device connected
to the system.
←→
↑↓
+F1
F10
ESC
Select Screen
Select Item
Change Field
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
The BIOS automatically detects the values of the dimmed items (Device, Vendor, Size, LBA
Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART Monitoring). These
values are not user-configurable. These items show N/A if no SATA device is installed in the
system.
ASUS P7H55D-M EVO
3-11
Type [Auto]
Allows you to select the type of device installed.
[Not Installed]
[Auto]
[CDROM]
[ARMD]
Select this option if no device is installed.
Allows automatic selection of the appropriate device type.
Select this option if you are specifically configuring a CD-ROM drive.
Select [ARMD] (ATAPI Removable Media Device) if your device is either a
ZIP, LS-120, or MO drive.
This item appears in SATA1-4 only.
LBA/Large Mode [Auto]
[Auto]
[Disabled]
Select [Auto] to enable the LBA mode (Logical Block Addressing mode)
if the device supports this mode, and if the device was not previously
formatted with LBA mode disabled.
Disables this function.
Block (Multi-Sector Transfer) M [Auto]
[Auto]
[Disabled]
When set to [Auto], the data transfer from and to the device occurs in
multiple sectors at a time if the device supports multi-sector transfer feature.
When set to [Disabled], the data transfer from and to the device occurs one
sector at a time.
PIO Mode [Auto]
[Auto]Allows automatic selection of the PIO (Programmed input/output) modes,
which correspond to different data transfer rates.
[0] [1] [2] [3] [4]Sets the PIO mode to Mode 0, 1, 2, 3, or 4.
Chapter 3
DMA Mode [Auto]
DMA (Direct Memory Access) allows your computer to transfer data to and from the hardware
devices installed with much less CPU overhead.
The DMA mode consists of SDMA (single-word DMA), MDMA (multi-word DMA), and UDMA
(Ultra DMA). Setting to [Auto] allows automatic selection of the DMA mode.
SMART Monitoring [Auto]
[Auto]Allows automatic selection of the S.M.A.R.T (Smart Monitoring, Analysis,
and Reporting Technology).
[Enabled]Enables the S.M.A.R.T feature.
[Disabled]Disables the S.M.A.R.T feature.
32Bit Data Transfer [Enabled]
[Enabled]Sets the controller to combine two 16-bit reads from the hard disk into
a single 32-bit double word transfer to the processor. This makes more
efficient use of the PCI bus as fewer transactions are needed for the
transfer of a particular amount of data.
[Disabled]Disables this function.
3-12
Chapter 3: BIOS setup
3.4.2
Storage Configuration
The Storage Configuration menu allows you to configure your storage devices. Select an item
then press <Enter> to display the submenu.
BIOS SETUP UTILITY
Main
Storage Configuration
SATA Configuration
Configure SATA as
[Enhanced]
[IDE]
Hard Disk Write Protect
IDE Detect Time Out (Sec)
[Disabled]
[35]
SATA Configuration [Enhanced]
Configuration options: [Disabled] [Compatible] [Enhanced]
Configure SATA as [IDE]
Allows you to set the SATA configuration.
[IDE]Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI]Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard
storage driver to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing the drive to
internally optimize the order of commands.
Hard Disk Write Protect [Disabled]
[Disabled]
Enables device write protection. This function will be effective only if the
device is accessed through BIOS.
Disables this function.
Chapter 3
[Enabled]
IDE Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices from the following options: [0] [5]
[10] [15] [20] [25] [30] [35]
ASUS P7H55D-M EVO
3-13
3.4.3
AHCI Configuration
This menu is the section for AHCI configuration. It appears only when you set the item
Configure SATA as from the submenu of SATA Configuration to [AHCI].
BIOS SETUP UTILITY
Main
AHCI Settings
SATA
SATA
SATA
SATA
SATA
SATA
Port1
Port2
Port3
Port4
Port5
Port6
[Not
[Not
[Not
[Not
[Not
[Not
Detected]
Detected]
Detected]
Detected]
Detected]
Detected]
SATA Port1–6 [XXXX]
Displays the status of auto-detection of SATA devices.
SATA Port1–6 [Auto]
[Auto]Allows automatic selection of the device type connected to the system.
[Not Installed] Selects this option if no SATA devices are installed.
SMART Monitoring [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system.
When read/write of your hard disk errors occur, this feature allows the hard disk to
report warning messages during the POST.
[Enabled]Enables the SMART monitoring feature.
[Disabled]Disables the SMART monitoring feature.
Chapter 3
3.4.4
System Information
This menu gives you an overview of the general system specifications. The BIOS automatically
detects the BIOS information, CPU specification, and system memory in this menu.
Main
BIOS SETUP UTILITY
BIOS Information
BIOS Version
: 0201
BIOS Build Date : 11/23/09
Processor
Type
: Intel(R) Core(TM) i5 CPU 3.33GHz
Speed
: 3333MHz
661 @ System Memory
Usable Size
: 925MB
3-14
Chapter 3: BIOS setup
3.5
Ai Tweaker menu
The Ai Tweaker menu items allow you to configure overclocking-related items.
Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field
values can cause the system to malfunction.
The configuration options for this chapter vary depending on the CPU and DIMM model you
installed on the motherboard.
Main
Ai Tweaker
BIOS SETUP UTILITY
Advanced
Power
Boot
Tools
Configure System Performance Settings
Ai Overclock Tuner
CPU Ratio Setting
Intel(R) SpeedStep(TM) Tech
Intel(R) TurboMode Tech
Xtreme Phase Full Power Mode
DRAM Frequency
QPI Frequency
[Auto]
[Auto]
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
DRAM Timing Control
CPU Differential Amplitude
CPU Clock Skew
[Auto]
[Auto]
******* Please key in numbers directly! *******
CPU Voltage Mode
[Offset]
Offset Voltage
[Auto]
IMC Voltage
[Auto]
Exit
[D.O.C.P.]
It’s designed to
overclock DRAM
frenquency by adjusting
BCLK frequency.
[X.M.P.]
When X.M.P. is enabled
BCLK frequency,
CPU ratio and memory
parameters will be
auto optimized.
←→
↑↓
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Scroll down to display the following items:
←→
↑↓
+F1
F10
ESC
Select Screen
Select Item
Change Option
General Help
Save and Exit
Exit
Chapter 3
DRAM Voltage
[Auto]
CPU PLL Voltage
[Auto]
PCH Voltage
[Auto]
iGPU Voltage
[Auto]
***********************************************
Load-Line Calibration
[Auto]
CPU Spread Spectrum
[Auto]
PCIE Spread Spectrum
[Auto]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.5.1
Ai Overclock Tuner [Auto]
Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
Manual
Allows you to individually set overclocking parameters.
Auto
Loads the optimal settings for the system.
D.O.C.P
Overclocks DRAM frequency by adjusting BCLK frequency.
If you install memory modules supporting the eXtreme Memory Profile
(X.M.P.) Technology, choose this item to set the profiles supported by
your memory modules for optimizing the system performance.
X.M.P.
The configuration options for the following sub-items vary depending on the CPU/DIMMs
you install on the motherboard.
ASUS P7H55D-M EVO
3-15
DRAM O.C. Profile [DDR3-1600MHz]
This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and allows
you to select a DRAM O.C. profile, which applies different settings to DRAM frequency,
DRAM timing and DRAM voltage. Configuration options: [DDR3-1600MHz] [DDR3-1800MHz]
[DDR3-1866MHz] [DDR3-2000MHz] [DDR3-2133MHz] [DDR3-2200MHz]
DRAM Frequency
(MHz)
Lynnfield CPU Frequency (GHz)
Clarkdale CPU Frequency
(GHz)
2.66
2.8
2.93
2.8
Others
1333
Auto
Auto
Auto
D.O.C.P.
Auto
1600
D.O.C.P.
Auto
Auto
D.O.C.P.
D.O.C.P.
Above 1600
D.O.C.P.
D.O.C.P.
D.O.C.P.
N/A
N/A
•
•
When using DIMMs with a frequncy higher than the Intel® CPU spec, use this ASUS
exclusive DRAM O.C. Profile function to overclock the DRAM.
Adjust BCLK frequency to obtain a better performance after applying the D.O.C.P function.
eXtreme Memory Profile [High Performance]
This item appears only when you set the Ai Overclock Tuner item to [X.M.P.] and allows you
to select the X.M.P. mode supported by your memory module.
[Disabled]
[High Performance]
[High Frequency]
You are not allowed to select the memory profile.
Allows your memory to work in high performance.
Allows your memory to work in high frequency.
Chapter 3
To obtain the best performance of the X.M.P. DIMM or 1600MHz DIMM, install only one
DIMM on each memory channel.
3.5.2
CPU Ratio Setting [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use the <+>
and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
3.5.3
Intel(R) SpeedStep(TM) Tech [Enabled]
[Enabled]
[Disabled]
3.5.4
The CPU speed is controlled by the operating system.
The CPU runs at its default speed.
Intel(R) TurboMode Tech [Enabled]
[Enabled]
Allows processor cores to run faster than marked frequency in specific
condition.
Disables this function.
[Disabled]
3-16
•
This item appears only if you set the CPU Ratio Setting item to [Auto].
•
Intel® Turbo Mode function support depends on CPU types.
Chapter 3: BIOS setup
3.5.5
[Auto]
[Enabled]
Xtreme Phase Full Power Mode [Auto]
Automatic configuration.
Enables Full Power Mode to ensure the best CPU overclocking performance.
The following two items appear only when you set the Ai Overclock Tuner item to
[Manual], [D.O.C.P.] or [X.M.P.].
3.5.6
BCLK Frequency [XXX]
Allows you to adjust the Internal Base Clock (BCLK). Use the <+> and <-> keys to adjust the
value. You can also key in the desired value using the numeric keypad. The values range
from 80 to 500.
3.5.7
PCIE Frequency [XXX]
Allows you to set the PCI Express frequency. Use the <+> and <-> keys to adjust the PCIE
frequency. You can also key in the desired value using the numeric keypad. The values range
from 100 to 200.
The PCIE Frequency item appears depending on CPU types.
3.5.8
DRAM Frequency [Auto]
Allows you to set the DDR3 operating frequency. The configuration options vary with the
BCLK Frequency item settings.
Chapter 3
According to Intel CPU spec, CPUs with a core frequency of 2.66G support the maximum
DIMM frequency of up to DDR3 1333. To use DIMMs of a higher frequency with a 2.66G
CPU, enable the DRAM O.C. Profile feature in BIOS. Refer to section 3.5.1 Ai Overclock
Tuner for details.
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
3.5.9
QPI Frequency [Auto]
Allows you to set the QPI frequency.
3.5.10
DRAM Timing Control
The items in this menu allow you to set the DRAM timing control features.
The configuration options for some of the following items vary depending on the DIMMs
you install on the motherboard.
1st Information: 7-7-7-20-4-60-8-5-20
The values vary depending on your settings of the following sub-items:
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [10 DRAM Clock]
[11 DRAM Clock]
ASUS P7H55D-M EVO
3-17
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [14 DRAM Clock]
[15 DRAM Clock]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [14 DRAM Clock]
[15 DRAM Clock]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [3 DRAM Clock] [4 DRAM Clock] – [30 DRAM Clock]
[31 DRAM Clock]
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [7 DRAM Clock]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [48 DRAM Clock] [60 DRAM Clock] [72 DRAM Clock] [82
DRAM Clock] [88 DRAM Clock] [90 DRAM Clock] [100 DRAM Clock] [110 DRAM Clock]
[114 DRAM Clock] [118 DRAM Clock] [122 DRAM Clock] [126 DRAM Clock] [130 DRAM
Clock] [134 DRAM Clock] [138 DRAM Clock] [142 DRAM Clock] [150 DRAM Clock] [160
DRAM Clock] [170 DRAM Clock] [180 DRAM Clock] [190 DRAM Clock] [200 DRAM Clock]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [18 DRAM Clock]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [3 DRAM Clock] – [15 DRAM Clock]
DRAM FOUR ACT WIN Time [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [63 DRAM Clock]
Chapter 3
DRAM Timing Mode [Auto]
Configuration options: [Auto] [1N] [2N]
DRAM WRITE to READ Delay(DR) [Auto]
Configuration options: [Auto] [1 DRAM Clock] – [8 DRAM Clock]
DRAM WRITE to READ Delay(SR) [Auto]
Configuration options: [Auto] [10 DRAM Clock] – [22 DRAM Clock]
DRAM READ to WRITE Delay(S/D) [Auto]
Configuration options: [Auto] [2 DRAM Clock] – [14 DRAM Clock]
DRAM READ to READ Delay(DR) [Auto]
Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]
DRAM READ to READ Delay(SR) [Auto]
Configuration options: [Auto] [4 DRAM Clock] [6 DRAM Clock]
DRAM WRITE to WRITE Delay(DR) [Auto]
Configuration options: [Auto] [2 DRAM Clock] – [9 DRAM Clock]
DRAM WRITE to WRITE Delay(SR) [Auto]
Configuration options: [Auto] [4 DRAM Clock] [6 DRAM Clock]
3-18
Chapter 3: BIOS setup
3.5.11
CPU Differential Amplitude [Auto]
Different AMP might enhance BCLK overclocking ability.
Configuration options: [Auto] [700mV] [800mV] [900mV] [1000mV]
3.5.12
CPU Clock Skew [Auto]
Adjusting this item may help enhancing BCLK overclocking ability.
Configuration options: [Auto] [Normal] [Delay 100ps]–[Delay 1500ps]
Some of the following items are adjusted by typing the desired values using the numeric keypad
and press the <Enter> key. You can also use the <+> and <-> keys to adjust the value. To
restore the default setting, type [auto] using the keyboard and press the <Enter> key.
3.5.13
CPU Voltage Mode [Offset]
Allows you to set the CPU Voltage Mode. Different sub-items appear according to the CPU
Voltage Mode item setting. Configuration options: [Offset] [Manual]
Offset Voltage [Auto]
This item appears only when you set the CPU Voltage Mode item to [Offset] and allows you to
set the Offset voltage. The values range from 0.00625V to 0.50000V with a 0.00625V interval.
Offset Sign [-]
This item appears only when you set the Offset Voltage item to a value other than [Auto].
[+]
To offset the voltage by a positive value.
[–]
To offset the voltage by a negative value.
Fixed Voltage [Auto]
Chapter 3
This item appears only when you set the CPU Voltage Mode item to [Manual] and allows you
to set a fixed CPU voltage. The values range from 0.85V to 1.7V with a 0.00625V interval.
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting a high
VCore voltage may damage the CPU permanently, and setting a low VCore voltage may
make the system unstable.
3.5.14
IMC Voltage [Auto]
Allows you to set the CPU Integrated Memory Controller voltage. The values range from 1.1V
to 1.9V with a 0.02V interval.
3.5.15
DRAM Voltage [Auto]
Allows you to set the DRAM voltage. The values range from 1.20V to 2.2V with a 0.02V interval.
According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may damage
the CPU permanently. We recommend you install the DIMMs with the voltage requirement
below 1.65V.
ASUS P7H55D-M EVO
3-19
3.5.16
CPU PLL Voltage [Auto]
Allows you to set the CPU PLL voltage. The values range from 1.8V to 2.2V with a 0.02V interval.
3.5.17
PCH Voltage [Auto]
Allows you to set the Platform Controller Hub voltage. The values range from 1.05V to 2.0V
with a 0.01V interval.
The system may need better cooling system to work stably under high voltage settings.
3.5.18
iGPU Voltage [Auto]
Allows you to set the integrated GPU voltage. The values range from 0.5V to 1.75V with a
0.0125V interval.
3.5.19
[Auto]
[Disabled]
[Enabled]
3.5.20
[Auto]
[Disabled]
[Enabled]
3.5.21
Chapter 3
[Auto]
[Disabled]
[Enabled]
3-20
Load-Line Calibration [Auto]
BIOS automatically adjusts the voltage.
Follows the Intel specifications.
Improves the CPU VDroop directly.
CPU Spread Spectrum [Auto]
Automatic configuration.
Enhances the BCLK overclocking ability.
Sets to [Enabled] for EMI control.
PCIE Spread Spectrum [Auto]
Automatic configuration.
Enhances the PCIE overclocking ability.
Sets to [Enabled] for EMI control.
Chapter 3: BIOS setup
3.6
Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other system
devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect field values
can cause the system to malfunction.
Main
Ai Tweaker
BIOS SETUP UTILITY
Advanced
Power
Boot
CPU Configuration
Uncore Configuration
Onboard Devices Configuration
USB Configuration
PCIPnP
Intel VT-d Tools
Exit
Configure CPU.
[Disabled]
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.6.1
CPU Configuration
The items in this menu show the CPU-related information that the BIOS automatically detects.
BIOS SETUP UTILITY
Advanced
Configure advanced CPU settings
Module Version:01.07
Manufacturer:Intel
Brand String:Intel(R) Core(TM) i5 CPU 661
Frequency
:3.33GHz
BCLK Speed :133MHz
Cache L1
:128 KB
Cache L2
:512 KB
Cache L3
:4096 KB
Ratio Status:Unlocked (Min:09, Max:25)
Ratio Actual Value:25
CPUID
:20652
CPU Ratio Setting
C1E Support
Hardware Prefetcher
Adjacent Cache Line Prefetch
Max CPUID Value Limit
Intel(R) Virtualization Tech
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
Chapter 3
The items shown in this screen may be different due to the CPU you installed.
Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
NOTE: Please key in
ratio numbers directly
←→
↑↓
F1
F10
ESC
Select Screen
Select Item
General Help
Save and Exit
Exit
Scroll down to display the following items:
CPU TM function
Execute-Disable Bit Capability
Intel(R) HT Technology
Active Processor Cores
A20M
Intel(R) SpeedStep(TM) Tech
Intel(R) TurboMode Tech
Intel(R) C-STATE Tech
C State package limit setting
[Enabled]
[Enabled]
[Enabled]
[All]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Auto]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
ASUS P7H55D-M EVO
3-21
CPU Ratio Setting [Auto]
Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use <+>
and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
C1E Support [Enabled]
[Enabled]
[Disabled]
Enables the C1E support function. This item should be enabled in order to
enable the Enhanced Halt Sate.
Disables this function.
Hardware Prefetcher [Enabled]
[Enabled]
[Disabled]
The processor fetches data and instructions from the memory into the
cache that are likely to be required in the near future. This reduces the
latency associated with memory reads.
Disables this function.
Adjacent Cache Line Prefetch [Enabled]
[Enabled]
[Disabled]
The processor fetches the currently requested cache line, as well as the
subsequent cache line. This reduces the cache latency by making the next
cache line immediately available if the processor requires it as well.
The processor fetches only the currently requested cache line.
Max CPUID Value Limit [Disabled]
[Enabled]
[Disabled]
Allows legacy operating systems to boot even without support for CPUs
with extended CPUID functions.
Disables this function.
Intel(R) Virtualization Tech [Enabled]
Chapter 3
[Enabled]
[Disabled]
Allows a hardware platform to run multiple operating systems separately
and simultaneously, enabling one system to virtually function as several
systems.
Disables this function.
CPU TM function [Enabled]
[Enabled]
[Disabled]
Enables the overheated CPU to throttle its clock speed to cool down.
Disables this function.
Execute Disable Bit Capability [Enabled]
[Enabled]
[Disabled]
Enables the No-Execution Page Protection Technology.
Forces the XD feature flag to always return to zero (0).
Intel(R) HT Technology [Enabled]
The Intel Hyper-Threading Technology allows a hyper-threading processor to appear as two
logical processors to the operating system, allowing the operating system to schedule two
threads or processes simultaneously.
[Enabled]
[Disabled]
3-22
Two threads per activated core are enabled.
Only one thread per activated core is enabled.
Chapter 3: BIOS setup
Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2]
A20M [Disabled]
[Enabled]
[Disabled]
Allows Legacy OSes to be compatible with APs.
Disables this function.
Intel(R) SpeedStep(TM) Tech [Enabled]
[Enabled]
[Disabled]
The CPU speed is controlled by the operating system.
The CPU runs at its default speed.
Intel(R) TurboMode Tech [Enabled]
[Enabled]
[Disabled]
Allows processor cores to run faster than marked frequency in specific
condition.
Disables this function.
Intel® Turbo Mode function support depends on CPU types.
Intel(R) C-STATE Tech [Enabled]
The Intel® C-State Technology allows the CPU to save more power under idle mode.
[Enabled]
[Disabled]
Enable this item only when you install a C-State Technology-supported CPU.
Disables this function.
C State package limit setting [Auto]
3.6.2
Chapter 3
This item appears only when you set the Intel(R) C-STATE Tech item to [Enabled]. We
recommend that you set this item to [Auto] for BIOS to automatically detect the C-State mode
supported by your CPU. Configuration options: [Auto] [C1] [C3] [C6]
Uncore Configuration
The Uncore Configuration menu allows you to change the advanced chipset settings.
Advanced
BIOS SETUP UTILITY
Uncore Configuration
IMC Type : Clarkdale
Memory Remap Feature [Enabled]
PCI MMIO Allocation: 4GB To 3072MB
Initate Graphic Adapter [PEG/PCI]
iGPU Graphics Mode Select [Enabled, 32MB]
iGPU Frequency [Auto]
Current iGPU Frequency: 900 MHz
DVMT Memory [Maximum DVMT]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Memory Remap Feature [Enabled]
[Disabled]
[Enabled]
Do not allow remapping of memory.
Allows for the segment of system memory that was previously overwritten
by PCI devices to be remapped above the total physical memory.
ASUS P7H55D-M EVO
3-23
Initate Graphic Adapter [PEG/PCI]
Allows you to select which graphics controller to use as the primary boot device.
Configuration options: [iGPU] [PCI/iGPU] [PCI/PEG] [PEG/iGPU] [PEG/PCI]
iGPU Graphics Mode Select [Enabled, 32MB]
Allows you to select the amount of memory used by the integrated GPU.
Configuration options: [Enabled, 32MB] [Enabled, 64MB] [Enabled, 128MB]
iGPU Frequency [Auto]
Allows you to adjust the integrated GPU frequency.
Configuration options: [Auto] [133 MHz] [167 MHz] – [1467 MHz] [1500 MHz]
DVMT Memory [256MB] or [Maximum DVMT]
The default value varies according to the system memory size. When installing DIMM
modules more than 1 GB, the default value is Maximum DVMT; when installing DIMM
modules less than 1 GB, the default value is 256MB.
[128MB]Up to 128MB of system memory can be used as graphics memory.
[256MB]Up to 256MB of system memory can be used as graphics memory.
[Maximum DVMT]Allows the system to dynamically allocate memory resources according
to the demands of the system. This option appears only when you install
DIMM modules more than 1 GB.
•
Changes to this item will take effect under Windows XP operating system only.
•
This motherboard supports Intel® DVMT 5.0 Technology whose maximum graphics
memory size in total varies with the system memory size in total and the operating
system. Refer to the following table for details.
Chapter 3
System Memory
1GB to < 1.5GB
1.5GB to < 2GB
2GB to < 3GB
3GB to < 4GB
4GB and above
3-24
Maximum Total Graphics Memory
Windows® XP
Windows® Vista™/ 7™
512MB
365MB
768MB
808MB
1024MB
877MB
—
1389MB
—
1748MB
Chapter 3: BIOS setup
3.6.3
Onboard Devices Configuration
Advanced
BIOS SETUP UTILITY
Onboard Devices Configuration
HDA Controller
Front Panel Type
SPDIF OUT Mode Setting
Realtek LAN
LAN Boot ROM
Onboard 1394 Controller
Marvell Storage Controller
Serial Port1 Address
Options
[Enabled]
[HD Audio]
[SPDIF]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[3F8/IRQ4]
Enabled
Disabled
HDA Controller [Enabled]
[Enabled]
[Disabled]
Enables the High Definition Audio Controller.
Disables the controller.
The following three items appear only when you set the HDA Controller item to [Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high-definition audio depending on the audio standard that the front panel audio
module supports.
[AC97]
Sets the front panel audio connector (AAFP) mode to legacy AC’97
[HD Audio] Sets the front panel audio connector (AAFP) mode to high definition audio.
SPDIF OUT Mode Setting [SPDIF]
If your graphics card has HDMI output and needs to use SPDIF signal from the
SPDIF_Out header, you need to set to HDMI for HDMI audio output.
Sets to [SPDIF Output] for SPDIF audio output.
Sets to [HDMI Output] for HDMI audio output.
Chapter 3
[SPDIF]
[HDMI]
Realtek LAN [Enabled]
[Enabled]
[Disabled]
Enables the Realtek LAN controller.
Disables the controller.
LAN Boot ROM [Disabled]
This item appears only when you set the previous item to [Enabled].
[Enabled] Enables the Realtek Gigabit LAN Boot ROM.
[Disabled] Disables the LAN Boot ROM.
Onboard 1394 Controller [Enabled]
[Enabled]
[Disabled]
Enables the onboard IEEE 1394a controller.
Disables the controller.
Marvell Storage Controller [Enabled]
[Enabled]
[Disabled]
Enables the Marvell storage controller.
Disables the controller.
ASUS P7H55D-M EVO
3-25
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
3.6.4
USB Configuration
The items in this menu allow you to change the USB-related features. Select an item and
press <Enter> to display the configuration options.
Advanced
BIOS SETUP UTILITY
USB Configuration
Options
Module Version - 2.24.5-13.4
Disabled
Enabled
USB Devices Enabled:
2 Hubs
USB Functions
Legacy USB Support
BIOS EHCI Hand-Off
[Enabled]
[Auto]
[Enabled]
Onboard USB 3.0 Controller
[Enabled]
The USB Devices Enabled item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Functions [Enabled]
[Enabled]
[Disabled]
Enables the USB Host Controllers.
Disables the controllers.
Chapter 3
The following items appear only when you set USB Functions to [Enabled].
Legacy USB Support [Auto]
[Auto]
[Enabled]
[Disabled]
Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Enables the support for USB devices on legacy operating systems (OS).
Disables the function.
BIOS EHCI Hand-off [Enabled]
[Enabled]
[Disabled]
Enables the support for operating systems without an EHCI hand‑off
feature.
Disables the function.
Onboard USB 3.0 Controller [Enabled]
[Enabled]
[Disabled]
Enables the USB 3.0 controller.
Disables the controller.
When using an add-on card, the USB 3.0 ports at back panel support the maximum
bandwidth of Gen 1.
3-26
Chapter 3: BIOS setup
3.6.5
PCIPnP
The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.
Advanced
BIOS SETUP UTILITY
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S
[No]
Plug And Play O/S [No]
[Yes]
[No]
3.6.6
Intel VT-d [Disabled]
Disables the Intel Virtualization Technology for Directed I/O.
Enables the Intel Virtualization Technology for Directed I/O.
Chapter 3
[Disabled]
[Enabled]
When set to [Yes] and if you install a Plug and Play operating system, the
operating system configures the Plug and Play devices not required for boot.
When set to [No], BIOS configures all the devices in the system.
ASUS P7H55D-M EVO
3-27
3.7
Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
Main
Ai Tweaker
BIOS SETUP UTILITY
Advanced
Power
Boot
Suspend Mode
Repost Video on S3 Resume
ACPI 2.0 Support
ACPI APIC Support
EuP Ready
[Auto]
[No]
[Disabled]
[Enabled]
[Disabled]
Tools
Exit
Select the ACPI state
used for System
Suspend.
APM Configuration
Hardware Monitor
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.7.1
Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend.
[Auto]The system automatically configures the ACPI suspend mode.
[S1 (POS) only] Sets the ACPI suspend mode to S1/POS (Power On Suspend).
[S3 only]
Sets the ACPI suspend mode to S3/STR (Suspend To RAM).
3.7.2
Repost Video on S3 Resume [No]
Chapter 3
Determines whether to invoke VGA BIOS POST on S3/STR resume.
[No]
[Yes]
3.7.3
[Disabled]
[Enabled]
3.7.4
[Disabled]
[Enabled]
3.7.5
[Disabled]
[Enabled]
3-28
The system will not invoke VGA BIOS POST on S3/STR resume.
The system invokes VGA BIOS POST on S3/STR resume.
ACPI 2.0 Support [Disabled]
The system will not add additional tables as per ACPI 2.0 specifications.
The system adds additional tables as per ACPI 2.0 specifications.
ACPI APIC Support [Enabled]
The system disables the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC).
The ACPI APIC table pointer is included in the RSDT pointer list.
EuP Ready [Disabled]
Disables the Energy Using Products (EuP) Ready function.
Allows BIOS to switch off some power at S5 state to get system ready for
the EuP requirement. When set to [Enabled], power for WOL, WO_USB,
audio and onboard LEDs will be switched off at S5 state.
Chapter 3: BIOS setup
3.7.6
APM Configuration
BIOS SETUP UTILITY
Power
APM Configuration
Restore on AC Power Loss
Power On By RTC Alarm
Power On By External Modems
Power On By PCI Devices
Power On By PCIE Devices
Power On By PS/2 Keyboard
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Options
Power Off
Power On
Last State
Restore On AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By RTC Alarm [Disabled]
[Disabled]
[Enabled]
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and System
Time will become user-configurable with set values.
Power On By External Modems [Disabled]
[Disabled]Disables to power up the computer when the external modem receives a
call while the computer is in Soft-off mode.
[Enabled]The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
Chapter 3
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By PCI Devices [Disabled]
[Disabled]
[Enabled]
Disables the PME to wake up from S5 by PCI devices.
Allows you to turn on the system through a PCI LAN or modem card. This
feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Power On By PCIE Devices [Disabled]
[Disabled]
[Enabled]
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
Disables the Power On by a PS/2 keyboard.
Allows you to turn on the system by pressing the Space Bar key on the
PS/2 keyboard. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead.
ASUS P7H55D-M EVO
3-29
[Ctrl-Esc]
[Power Key]
3.7.7
Allows you to turn on the system by pressing the Ctrl key and Esc key
of the PS/2 keyboard. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Allows you to turn on the system by pressing the Power key on the PS/2
keyboard. This feature requires an ATX power supply that provides at least
1A on the +5VSB lead.
Hardware Monitor
BIOS SETUP UTILITY
Power
Hardware Monitor
CPU Temperature (PECI)
CPU Temperature(PECI)
MB Temperature
[35ºC/95ºF]
[34ºC/93ºF]
CPU Fan Speed
CPU Q-Fan Control
[3590RPM]
[Disabled]
Chassis Fan 1 Speed
Chassis Q-Fan Control
[N/A]
[Disabled]
Power Fan Speed
[N/A]
CPU
3.3V
5V
12V
[ 1.040V]
[ 3.008V]
[ 4.776V]
[11.648V]
Voltage
Voltage
Voltage
Voltage
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
CPU Temperature(PECI) / MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignored if you do not wish to display the detected temperatures.
Chapter 3
CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]
Chassis Fan 1 Speed [xxxxRPM] or [Ignored] / [N/A]
Power Fan Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU, chassis, and
power fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard,
the field shows N/A. Select Ignored if you do not wish to display the detected speed.
CPU Q-Fan Control [Disabled]
[Disabled]
[Enabled]
Disables the CPU Q-Fan control feature.
Enables the CPU Q-Fan control feature.
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows
you to set the appropriate performance level of the CPU fan.
[Standard]Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
[Silent]Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
[Turbo]
Sets to [Turbo] to achieve maximum CPU fan speed.
[Manual] Sets to [Manual] to assign detailed fan speed control parameters.
3-30
Chapter 3: BIOS setup
The following four items appear only when you set CPU Fan Profile to [Manual].
CPU Upper Temperature [70ºC/158ºF]
Sets the upper limit of the CPU temperature.
Configuration options: [40ºC/104ºF] [50ºC/122ºF] [60ºC/140ºF] [70ºC/158ºF] [80ºC/176ºF]
[90ºC/194ºF]
CPU Fan Max. Duty Cycle [100%]
Sets the maximum CPU fan duty cycle. When the CPU temperature reaches the upper limit, the
CPU fan will operate at the maximum duty cycle.
Configuration options: [20%] [30%] [40%] [50%] [60%] [70%] [80%] [90%] [100%]
CPU Lower Temperature [40ºC/104ºF]
Displays the lower limit of the CPU temperature.
CPU Fan Min. Duty Cycle [20%]
Sets the minimum CPU fan duty cycle. When the CPU temperature is under 40ºC/104ºF, the
CPU fan will operate at the minimum duty cycle.
Configuration options: [00%] [10%] [20%] [30%] [40%] [50%] [60%] [70%] [80%] [90%] [100%]
Chassis Q-Fan Control [Disabled]
[Disabled]
[Enabled]
Disables the Chassis Q-Fan control feature.
Enables the Chassis Q-Fan control feature.
Chassis Fan Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature and
allows you to set the appropriate performance level of the chassis fan.
Chapter 3
[Standard]Sets to [Standard] to make the chassis fan automatically adjust depending
on the chassis temperature.
[Silent]Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
[Turbo]
Sets to [Turbo] to achieve maximum chassis fan speed.
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignored if you do not want to detect this item.
ASUS P7H55D-M EVO
3-31
3.8
Boot menu
The Boot menu items allow you to change the system boot options. Select an item then press
<Enter> to display the submenu.
Main
Ai Tweaker
BIOS SETUP UTILITY
Advanced
Power
Boot
Tools
Exit
Specifies the Boot Device
Boot Priority sequence.
Boot Settings
Boot Device Priority
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
Boot Settings Configuration
Security
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.8.1
Boot Device Priority
BIOS SETUP UTILITY
Boot
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
[Removable Dev.]
[Hard Drive]
[ATAPI CD-ROM]
Chapter 3
1st – xxth Boot Device [Removable Dev.]
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
Configuration options: [Removable Dev.] [Hard Drive] [ATAPI CD-ROM] [Disabled]
•
•
3-32
To select the boot device during system startup, press <F8> when ASUS Logo appears.
To access Windows OS in Safe Mode, do any of the following:
- Press <F5> when ASUS Logo appears.
- Press <F8> after POST.
Chapter 3: BIOS setup
3.8.2
Boot Settings Configuration
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Quick Boot Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait For ‘F1’ If Error
Hit ‘DEL’ Message Display
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Enabled]
[Enabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Quick Boot [Enabled]
[Disabled]
When set to [Disabled], BIOS performs all the POST items.
[Enabled]When set to [Enabled], BIOS skips some power on self tests (POST) while
booting to decrease the time needed to boot the system.
Full Screen Logo [Enabled]
[Enabled]
[Disabled]
Enables the full screen logo display feature.
Disables the full screen logo display feature.
Set this item to [Enabled] to use the ASUS MyLogo 2™ feature.
AddOn ROM Display Mode [Force BIOS]
The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Chapter 3
[Force BIOS]
Bootup Num-Lock [On]
[Off]
[On]
Sets the power-on state of the NumLock to [Off].
Sets the power-on state of the NumLock to [On].
Wait For ‘F1’ If Error [Enabled]
[Disabled]
[Enabled]
Disables this function.
The system waits for the <F1> key to be pressed when error occurs.
Hit ‘DEL’ Message Display [Enabled]
[Disabled]
[Enabled]
Disables this function.
The system displays the message “Press DEL to run Setup” during POST.
ASUS P7H55D-M EVO
3-33
3.8.3
Security
The Security menu items allow you to change the system security settings. Select an item
and press <Enter> to display the configuration options.
BIOS SETUP UTILITY
Boot
Security Settings
Supervisor Password
User Password
: Not Installed
: Not Installed
<Enter> to change
password.
<Enter> again to
disable password.
Change Supervisor Password
Change User Passward
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor Password item
on top of the screen shows the default Not Installed. After you set a password, this item
shows Installed.
To set a Supervisor Password:
1.
2.
3.
Select the Change Supervisor Password item and press <Enter>.
From the password box, key in a password composed of at least six letters and/or
numbers, then press <Enter>.
Confirm the password when prompted.
The message Password Installed appears after you successfully set your password.
To change the supervisor password, follow the same steps as in setting a user password.
To clear the supervisor password, select the Change Supervisor Password then press
<Enter>. The message Password Uninstalled appears.
Chapter 3
If you have forgotten your BIOS password, you can clear clear it by erasing the CMOS Real
Time Clock (RTC) RAM. See section 2.6 Jumper for information on how to erase the RTC
RAM.
After you have set a supervisor password, the other items appear to allow you to change
other security settings.
BIOS SETUP UTILITY
Boot
Security Settings
Supervisor Password
User Password
: Installed
: Installed
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
<Enter> to change
password.
<Enter> again to
disabled password.
[Full Access]
[Setup]
User Access Level [Full Access]
This item allows you to select the access restriction to the Setup items.
[No Access]
[View Only]
[Limited]
[Full Access]
3-34
Prevents user access to the Setup utility.
Allows access but does not allow change to any field.
Allows changes only to selected fields, such as Date and Time.
Allows viewing and changing all the fields in the Setup utility.
Chapter 3: BIOS setup
Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1.
2.
3.
Select the Change User Password item and press <Enter>.
On the password box that appears, type a password composed of at least six letters
and/or numbers, then press <Enter>.
Confirm the password when prompted.
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps as in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
BIOS checks for user password when accessing the Setup utility.
BIOS checks for user password both when accessing Setup and booting
the system.
Chapter 3
[Setup]
[Always]
ASUS P7H55D-M EVO
3-35
3.9
Tools menu
The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the submenu.
Main
BIOS SETUP UTILITY
Advanced
Power
Boot
Ai Tweaker
Tools
Exit
ASUS O.C. Profile
AI NET 2
ASUS EZ Flash 2
Express Gate Enter OS Timer
Reset User Data
[Auto]
[10 Seconds]
[No]
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.9.1
ASUS O.C. Profile
This item allows you to store or load multiple BIOS settings.
BIOS SETUP UTILITY
O.C. PROFILE Configuration
Chapter 3
O.C.
O.C.
O.C.
O.C.
O.C.
O.C.
O.C.
O.C.
Profile
Profile
Profile
Profile
Profile
Profile
Profile
Profile
1
2
3
4
5
6
7
8
Status
Status
Status
Status
Status
Status
Status
Status
:
:
:
:
:
:
:
:
Not
Not
Not
Not
Not
Not
Not
Not
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Installed
Tools
Typing your profile
name, [0-9][a-z][A-Z]
are acceptable.
Status:
Add Your CMOS Profile.
Name:
Save To:
Load CMOS Profiles.
Load From:
[Default-Profile]
[Uninstalled]
[Blank]
←→
↑↓
F1
F10
ESC
Select Screen
Select Item
General Help
Save and Exit
Exit
Start O.C. Profile
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Add Your CMOS Profile
Allows you to save the current BIOS file to the BIOS Flash. In the Name sub-item, key in
your profile name and press <Enter>, and then choose a profile number to save your CMOS
settings in the Save to sub-item.
Load CMOS Profiles.
Allows you to load the previous BIOS settings saved in the BIOS Flash. Press <Enter> to
load the file.
3-36
Chapter 3: BIOS setup
Start O.C. Profile
Allows you to run the utility to save and load CMOS. Press <Enter> to run the utility.
ASUSTek O.C. Profile Utility V2.10
Current CMOS
BOARD: P7H55D-M EVO
VER: 0115
DATE: 10/28/2009
Restore CMOS
BOARD: Unknown
VER: Unknown
DATE: Unknown
PATH: A:\
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
•
•
•
3.9.2
[V] Drive Info
[Esc] Exit
This function can support devices such as a USB flash disk with FAT 32/16 format and
single partition only.
DO NOT shut down or reset the system while updating the BIOS to prevent the
system boot failure!
We recommend that you update the BIOS file only coming from the same memory/CPU
configuration and BIOS version.
Only the CMO file can be loaded.
Chapter 3
•
[Tab] Switch
[B] Backup
AI NET 2
BIOS SETUP UTILITY
AI NET 2
Pair Status
Tools
Length
Check Realtek LAN cable
[Disabled]
Check Realtek LAN cable [Disabled]
[Disabled]
[Enabled]
BIOS will not check the Realtek LAN cable during the Power-On Self-Test
(POST).
BIOS checks the Realtek LAN cable during the Power-On Self-Test (POST).
ASUS P7H55D-M EVO
3-37
3.9.3
ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice.
For more details, refer to section 3.2.2 ASUS EZ Flash 2 utility.
3.9.4
Express Gate [Auto]
Allows you to enable or disable the ASUS Express Gate feature. The ASUS Express Gate
feature is a unique instant-on environment that provides quick access to the Internet browser
and Skype. Configuration options: [Enabled] [Disabled] [Auto]
Enter OS Timer [10 Seconds]
Sets countdown duration that the system waits at the Express Gate’s first screen before
starting Windows or other installed OS. Choose [Prompt User] to stay at the first screen of
Express Gate for user action.
Configuration options: [Prompt User] [1 second] [3 seconds] [5 seconds] [10 seconds]
[15 seconds] [20 seconds] [30 seconds]
Reset User Data [No]
Allows you to clear Express Gate’s user data.
Chapter 3
[Reset]When setting this item to [Reset], ensure that you save the setting to the
BIOS so that the user data will be cleared the next time you enter the
Express Gate. User data includes the Express Gate’s settings as well as
any personal information stored by the web browser such as bookmarks,
cookies, browsing history. This is useful in the rare case where corrupt
settings prevent the Express Gate environment from launching properly.
[No]Sets to [No] to disable the Reset User Data function when entering the
Express Gate.
The first time wizard will run again when you enter the Express Gate environment after
clearing its settings.
3-38
Chapter 3: BIOS setup
3.10 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values for the BIOS
items, and save or discard your changes to the BIOS items.
Main
Ai Tweaker
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
BIOS SETUP UTILITY
Advanced
Power
Boot
Tools
Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
←→
↑↓
Enter
F1
F10
ESC
Select Screen
Select Item
Go to Sub Screen
General Help
Save and Exit
Exit
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
Pressing <Esc> does not immediately exit this menu. Select one of the options from this
menu or <F10> from the legend bar to exit.
Exit & Save Changes
Once you are finished making your selections, choose this option from the Exit menu to
ensure the values you selected are saved to the CMOS RAM. An onboard backup battery
sustains the CMOS RAM so it stays on even when the PC is turned off. When you select this
option, a confirmation window appears. Select Ok to save changes and exit.
Chapter 3
If you attempt to exit the Setup program without saving your changes, the program prompts
you with a message asking if you want to save your changes before exiting. Press <Enter>
to save the changes while exiting.
Exit & Discard Changes
Select this option only if you do not want to save the changes that you made to the Setup
program. If you made changes to fields other than System Date, System Time, and
Password, the BIOS asks for a confirmation before exiting.
Discard Changes
This option allows you to discard the selections you made and restore the previously saved
values. After selecting this option, a confirmation appears. Select Ok to discard any changes
and load the previously saved values.
Load Setup Defaults
This option allows you to load the default values for each of the parameters on the Setup
menus. When you select this option or if you press <F5>, a confirmation window appears.
Select Ok to load default values. Select Exit & Save Changes or make other changes before
saving the values to the non-volatile RAM.
ASUS P7H55D-M EVO
3-39
Chapter 3
3-40
Chapter 3: BIOS setup
Chapter 4
Chapter 4:
4.1
Software support
Installing an operating system
This motherboard supports Windows® XP/ 64-bit XP/ Vista / 64-bit Vista / 7 / 64-bit 7
operating systems (OS). Always install the latest OS version and corresponding updates to
maximize the features of your hardware.
4.2
•
Motherboard settings and hardware options vary. Use the setup procedures presented
in this chapter for reference only. Refer to your OS documentation for detailed
information.
•
Ensure that you install the Windows® XP Service Pack 2 or later versions before
installing the drivers for better compatibility and system stability.
Support DVD information
The support DVD that comes with the motherboard package contains the drivers, software
applications, and utilities that you can install to avail all motherboard features.
The contents of the support DVD are subject to change at any time without notice. Visit the
ASUS website at www.asus.com for updates.
4.2.1
Running the support DVD
Place the support DVD into the optical drive. The DVD automatically displays the Specials
menu if Autorun is enabled in your computer. Click each menu tab and select the items you
want to install.
The Drivers menu shows the
available device drivers if
the system detects installed
devices. Install the necessary
drivers to use the devices.
The Utilities
menu shows the
applications and
other software that
the motherboard
supports.
The Manual menu contains
the list of supplementary user
manuals. Click an item to open
the folder of the user manual.
Click the Contact tab
to display the ASUS
contact information.
Click the Highlights
tab to display the
software information
Click an item
to install
Click to obtain the
corresponding
software manuals
If Autorun is NOT enabled in your computer, browse the contents of the support DVD to
locate the file ASSETUP.EXE from the BIN folder. Double-click the ASSETUP.EXE to run
the DVD.
ASUS P7H55D-M EVO
4-1
Chapter 4
Click an icon
to display DVD/
motherboard
information
4.2.2
Obtaining the software manuals
The software manuals are included in the support DVD. Follow the instructions below to get
the necessary software manuals.
The software manual files are in Portable Document Format (PDF). Install the Adobe®
Acrobat® Reader from the Utilities menu before opening the files.
1.
Click the Manual tab. Click ASUS
Motherboard Utility Guide from
the manual list on the left.
2.
The Manual folder of the support
DVD appears. Double-click the
folder of your selected software.
3.
Some software manuals are
provided in different languages.
Double-click the language to
show the software manual.
Chapter 4
The screenshots in this section are for reference only. The actual software manuals
containing in the support DVD vary by models.
4-2
Chapter 4: Software support
4.3
Software information
Most of the applications in the support DVD have wizards that will conveniently guide you
through the installation. View the online help or readme file that came with the software
application for more information.
4.3.1
ASUS PC Probe II
PC Probe II is a utility that monitors the computer’s vital components, and detects and
alerts you of any problem with these components. PC Probe II senses fan rotations, CPU
temperature, and system voltages, among others. Because PC Probe II is software-based,
you can start monitoring your computer the moment you turn it on. With this utility, you are
assured that your computer is always at a healthy operating condition.
Launching PC Probe II
1.
2.
3.
Install PC Probe II from the motherboard support DVD.
Launch PC Probe II by clicking Start > All Programs > ASUS > PC Probe II > PC
Probe II v1.xx.xx. The PC Probe II main window appears.
The PC Probe II icon appears in the Windows® notification area. Click this icon to close
or restore the application.
PC Probe II main window
Button
Function
Opens the Configuration window
Opens the Report window
Opens the Desktop Management Interface window
Opens the Peripheral Component Interconnect window
Opens the Windows Management Instrumentation window
Chapter 4
Opens the hard disk drive, memory, CPU usage window
Shows/Hides the Preference section
Minimizes the application
Closes the application
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
ASUS P7H55D-M EVO
4-3
4.3.2 ASUS AI Suite
ASUS AI Suite allows you to launch several ASUS utilities easily.
Launching AI Suite
1.
Install AI Suite from the motherboard support DVD.
2.
Launch AI Suite by clicking Start > All Programs > ASUS > AI Suite > AI Suite v1.xx.
xx. The AI Suite main window appears.
3.
The AI Suite icon
appears in the Windows® notification area. If you minimize the
application main window, click this icon to restore the window.
Using AI Suite
Click each utility button to launch the utility, or click the Normal button to restore system
default settings.
Click to open the monitor window that displays
system information such as CPU temperature,
CPU voltage, fan speed, and CPU/FSB frequency
Click to restore
default settings
Click to launch
each utility
Chapter 4
4-4
•
The screenshots in this section are for reference only. The actual utility buttons vary
by models.
•
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
Chapter 4: Software support
4.3.3
ASUS Fan Xpert
Asus Fan Xpert allows you to adjust both the CPU and chassis fan speeds according to
different ambient temperatures and your PC’s system loading. The various fan profiles offer
flexible controls of fan speeds to achieve a quiet and cool system environment.
Launching Fan Xpert
After installing AI Suite from the motherboard support DVD, launch Fan Xpert by doubleclicking the AI Suite tray icon and then clicking the Fan Xpert button
on the AI Suite
main window.
Using Fan Xpert
Click to open the
Calibration window
Click to select a fan
Click to select a
fan profile
Click to apply
the settings
Click to display
the current CPU
temperature and the fan
speed ratio
Click to cancel
the settings
Fan profiles
•
Disable: disables the Fan Xpert function.
•
Silent: minimizes fan speed for quiet fan operation.
•
•
•
•
Standard: adjusts fan speed in a moderate pattern.
Chapter 4
•
Turbo: maximizes the fan speed for the best cooling effect.
Intelligent: automatically adjusts the CPU fan speed according to the ambient
temperature.
Stable: fixes the CPU fan speed to avoid noise caused by the unsteady fan rotation. The
fan will speed up when the temperature exceeds 70ºC.
User: Allows you to configure the CPU fan profile under certain limitations.
ASUS P7H55D-M EVO
4-5
4.3.4
ASUS TurboV
ASUS TurboV allows you to easily overclock without exiting or rebooting the OS, and set up
the best O.C. settings for different scenarios.
Refer to the CPU documentation before adjusting CPU voltage settings. Setting a high
voltage may damage the CPU permanently, and setting a low voltage may make the
system unstable.
•
•
•
For system stability, all changes made in ASUS TurboV will not be saved to BIOS
settings and will not be kept on the next system boot. Use the Save Profile function
to save your customized overclocking settings and manually load the profile after
Windows starts.
EPU cannot run on the customized overclocking settings. Restart the computer to
launch EPU.
When TurboV is enabled, ASUS EPU will be set to High Performance mode
automatically.
Launching ASUS TurboV
1.
2.
Install the ASUS TurboV utility from the motherboard support DVD.
Click Start > All Programs > ASUS > TurboV > TurboV.
Save the current settings as a new profile
Target settings
Default settings
Voltage
Adjustment bars
Click to show
more settings
iGPU voltage and
frequency settings
Advanced CPU
and chipset
voltage settings
Chapter 4
Applies all changes immediately
•
•
•
4-6
Undoes all changes without applying
GPU Boost is available when you install the GPU Boost driver from the motherboard
support DVD.
For advanced overclock ability, adjust first the BIOS items, and then proceed more
detailed adjustments using TurboV.
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
Chapter 4: Software support
4.3.5
ASUS GPU Boost
ASUS GPU Boost allows you to overclock the integrated GPU voltage and integrated
GPU frequency in WIndows® environment and takes effect in real-time without exiting and
rebooting the OS.
Refer to the CPU documentation before adjusting iGPU voltage settings. Setting a high
voltage may damage the iGPU permanently, and setting a low voltage may make the
system unstable.
•
•
•
•
ASUS GPU Boost is available only when you install the GPU Boost driver from the
motherboard support DVD.
For system stability, all changes made in ASUS GPU Boost will not be saved to BIOS
settings and will not be kept on the next system boot. Use the Save Profile function
to save your customized overclocking settings and manually load the profile after
Windows starts.
EPU cannot run on the customized overclocking settings. Restart the computer to
launch EPU.
When GPU Boost is enabled, ASUS EPU will be set to High Performance mode
automatically.
Launching ASUS GPU Boost
1.
2.
3.
4.
Install the ASUS TurboV utility from the motherboard support DVD.
Install the ASUS GPU Boost driver from the motherboard support DVD.
Click Start > All Programs > ASUS > TurboV > TurboV.
Click More Setting from the TurboV main screen, and then click GPU Boost.
Adjustment sliders
Click the Easy Mode button
to adjust iGPU frequency and
iGPU voltage simultaneously
Default settings Target settings
ASUS P7H55D-M EVO
Chapter 4
Undoes all changes
without applying
Applies all changes
immediately
4-7
4.3.6
ASUS Turbo Key
ASUS Turbo Key allows the user to turn the PC power button into a physical overclocking
button. After the easy setup, Turbo Key can boost performances without interrupting ongoing
work or games—with just one touch!
Launching ASUS Turbo Key
1.
Install ASUS Turbo Key from the motherboard support DVD.
3.
Double-click the ASUS Turbo Key icon in the
Windows® notification area to launch the Turbo
Key user interface.
2.
Restart your computer. ASUS Turbo Key automatically starts after Windows® start-up.
Configuring ASUS Turbo Key
1
2
3
4
1.
2.
3.
4.
Select your desired power button action. Select Turbo Key Off to keep the power button
as a common switch. Select Turbo Key On to boost system performance after pressing
the power button.
You can choose whether to show Turbo Key OSD and status by clicking the check
boxes in the Setting section.
You can decide the performance boost level by selecting Turbo Key Profile. You can
also load personal profiles saved in the ASUS TurboV utility. The default is “Rocket
Mode”. For detailed ASUS TurboV configurations, refer to the software manual in the
support DVD or visit the ASUS website at www.asus.com.
Click Apply for all settings to take effect.
Chapter 4
Using ASUS Turbo Key
Press the power button on your computer chassis to use the Turbo Key function defined in
the Turbo Key user interface. Press the power button again to turn off the Turbo Key function.
Press and hold the power button for 4 seconds will turn off your computer.
Refer to the software manual in the support DVD or visit the ASUS website
at www.asus.com for detailed software configuration.
4-8
Chapter 4: Software support
4.3.7
ASUS EPU
ASUS EPU is an energy-efficient tool that provides you with a total system power-saving
solution. It detects the current computer loading and intelligently adjusts the power in
real-time. With auto phase switching for components, the EPU automatically provides the
most appropriate power usage via intelligent acceleration and overclocking.
ASUS EPU provides you with these modes to choose from:
•
Turbo Mode
•
Medium Power Saving Mode
•
High Performance Mode
•
Max. Power Saving Mode
When you select Auto Mode
, the system shifts modes automatically according to the
current system status. You can also configure advanced settings for each mode.
Launching EPU
After installing EPU from the motherboard support
DVD, double-click the EPU tray icon to launch the
program.
The first time you launch EPU, the
following message will appear, asking
you to run Calibration first. Running
calibration allows the system to detect
CPU properties to optimize power
management.
Click Run Calibration and wait for a few seconds. Then, the EPU main menu appears.
EPU main menu
iGPU energy saving status
GPU Boost is available only when
you install the GPU Boost driver
from the support DVD.
•
EPU supports iGPU power saving solution when you use an Intel® Clarkdale CPU and
install the GPU Boost driver from the support DVD.
•
Refer to the software manual in the support DVD or visit the ASUS website
at www.asus.com for detailed software configuration.
ASUS P7H55D-M EVO
Chapter 4
Displays the following message
if no VGA power saving engine is
detected.
4-9
4.3.8
ASUS Express Gate
ASUS Express Gate is an instant-on environment that gives you quick access to the Internet,
Skype, and viewing your pictures. Within a few seconds of powering on your computer, you
will be at the Express Gate menu where you can start the web browser, Skype, or other
Express Gate applications.
Notices about ASUS Express Gate
•
Ensure to install ASUS Express Gate from the motherboard support DVD before use.
•
ASUS Express Gate supports SATA devices in IDE mode only. See chapter 3 for BIOS
setup details.
•
ASUS Express Gate supports SATA devices connected to motherboard
chipset-controlled onboard SATA ports only. All onboard extended SATA ports
and external SATA ports are NOT supported. See chapter 2 for the exact location of
onboard SATA ports.
•
ASUS Express Gate supports file uploading from ODD and USB drives and
downloading to USB drives only.
•
ASUS Express Gate supports installation on SATA HDDs, USB HDDs and Flash drives
with at least 1.2GB of available disk space. When installed on USB HDDs and Flash
drives, connect the drives to the motherboard USB port before turning on the computer.
•
Your monitor must support the screen resolution of 1024 x 768, or ASUS Express
Gate will be skipped during the booting process, and the existing OS will be launched
directly.
•
Installation of at least 1GB system memory is recommended for better performance.
The First Screen
Express Gate’s first screen appears within a few seconds after you power on the computer.
Click any of the application
icons to enter Express Gate
environment and launch the
selected application
Turn off the computer
Chapter 4
Continue booting to existing OS when the timer above the Exit icon counts
down to zero (0); click to immediately enter existing OS
4-10
•
To enter the motherboard BIOS setup program, click Exit on the Express Gate First
Screen, and then press the <Del> key during POST.
•
See the software manual in the bundled motherboard support DVD or click
Express Gate environment for detailed software instructions.
in the
Chapter 4: Software support
4.3.9
Audio configurations
The Realtek audio CODEC provides 8-channel audio capability to deliver the ultimate audio
experience on your computer. The software provides Jack-Detection function, S/PDIF Out
support, and interrupt capability. The CODEC also includes the Realtek® proprietary UAJ®
(Universal Audio Jack) technology for all audio ports, eliminating cable connection errors and
giving users plug and play convenience.
®
Follow the installation wizard to install the Realtek® Audio Driver from the support CD/DVD
that came with the motherboard package.
If the Realtek audio software is correctly installed, you will find
the Realtek HD Audio Manager icon on the taskbar. Doubleclick on the icon to display the Realtek HD Audio Manager.
A.
Realtek HD Audio Manager
Realtek HD Audio Manager for Windows® Vista™
Set default device
button
Minimize
button
Exit button
Device
advanced
settings
Configuration
option tabs
Connector
settings
Analog
and digital
connector
status
Control
settings
window
Information
button
Realtek HD Audio Manager for Windows XP
Configuration
options
Control settings
window
Exit button
Minimize button
Chapter 4
B.
Information button
ASUS P7H55D-M EVO
4-11
Chapter 4
4-12
Chapter 4: Software support
ASUS contact information
ASUSTeK COMPUTER INC.
Address
Telephone Fax E-mail
Web site
Technical Support
Telephone Online support
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
+886-2-2894-3447
+886-2-2890-7798
info@asus.com.tw
www.asus.com.tw
+86-21-38429911
support.asus.com
ASUS COMPUTER INTERNATIONAL (America)
Address
Telephone
Fax
Web site
Technical Support
Telephone Support fax
Online support
800 Corporate Way, Fremont, CA 94539, USA
+1-812-282-3777
+1-510-608-4555
usa.asus.com
+1-812-282-2787
+1-812-284-0883
support.asus.com
ASUS COMPUTER GmbH (Germany and Austria)
Address
Fax
Web site
Online contact
Technical Support
Telephone
Support Fax
Online support
Harkort Str. 21-23, D-40880 Ratingen, Germany
+49-2102-959911
www.asus.de
www.asus.de/sales
+49-1805-010923
+49-2102-9599-11
support.asus.com
(510)739-3777/(510)608-4555
800 Corporate Way, Fremont, CA 94539.
Asus Computer International
Signature :
Date :
Representative Person’s Name :
Dec. 1, 2009
Steve Chang / President
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Supplementary Information:
FCC Part 15, Subpart E, Intentional Radiators
FCC Part 15, Subpart B, Unintentional Radiators
FCC Part 15, Subpart C, Intentional Radiators
Model Number : P7H55D-M EVO
Conforms to the following specifications:
Product Name : Motherboard
hereby declares that the product
Phone/Fax No:
Address:
Responsible Party Name:
Per FCC Part 2 Section 2. 1077(a)
DECLARATION OF CONFORMITY
Manufacturer:
Model name :
Year to begin affixing CE marking:2009
Declaration Date: Dec. 1, 2009
CE marking
EN 60950-1:2001+A11:2004
2006/95/EC-LVD Directive
EN 300 328 V1.7.1(2006-05)
EN 300 440-1 V1.4.1(2008-05)
EN 300 440-2 V1.2.1(2008-03)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V3.2.1(2007-05)
EN 301 908-2 V3.2.1(2007-05)
EN 301 893 V1.4.1(2005-03)
EN 50360:2001
EN 50371:2002
EN 62311:2008
EN 50385:2002
1999/5/EC-R &TTE Directive
EN 55022:2006+A1:2007
EN 61000-3-2:2006
EN 55013:2001+A1:2003+A2:2006
2004/108/EC-EMC Directive
Name :
Signature : __________
CEO
Jerry Shen
Position :
(EC conformity marking)
EN60065:2002+A1:2006
EN 301 489-1 V1.8.1(2008-04)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.3.1(2002-08)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V1.3.2(2008-04)
EN 301 489-24 V1.4.1(2007-09)
EN 302 326-2 V1.2.2(2007-06)
EN 302 326-3 V1.3.1(2007-09)
EN 301 357-2 V1.3.1(2006-05)
EN 55024:1998+A1:2001+A2:2003
EN 61000-3-3:1995+A1:2001+A2:2005
EN 55020:2007
conform with the essential requirements of the following directives:
Motherboard
P7H55D-M EVO
Product name :
declare the following apparatus:
HARKORT STR. 21-23, 40880 RATINGEN
GERMANY
ASUS COMPUTER GmbH
Authorized representative in Europe:
Country:
Country:
Address, City:
No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C.
TAIWAN
Address, City:
ASUSTek COMPUTER INC.
EC Declaration of Conformity
We, the undersigned,