Caster Trike
Owner’s Manual
Read and understand this entire manual before riding!
For assistance contact Razor. DO NOT RETURN TO STORE.
Item Number:
20036540
Contents
Safety Warnings............................................................. 1
Before You Begin............................................................ 2
Assembly and Set-Up.................................................. 3-4
RipRider 360˚ Caster Trike Parts..................................... 5
Safety Reminders........................................................... 6
Warranty......................................................................... 6
Safety Warnings
WARNING: Riding the RipRider 360˚ Caster Trike can be a
hazardous activity. Certain conditions may cause the equipment to fail
without fault of the manufacturer. The RipRider 360˚ Caster Trike can and is
intended to move, and it is therefore possible to lose control, fall off and/or
get into dangerous situations that no amount of care, instruction or expertise
can eliminate. If such things occur you can be seriously injured or die, even
when using safety equipment and other precautions. RIDE AT YOUR OWN
RISK AND USE COMMON SENSE.
Ride defensively. Watch out for potential obstacles that could force you to
swerve suddenly or lose control. Be careful to avoid pedestrians, skaters,
skateboards, scooters, bikes, children or animals who may enter your path,
and respect the rights and property of others.
This manual contains many warnings and cautions concerning the
consequences of failing to maintain, inspect or properly use your RipRider
360˚ Caster Trike. Because any incident can result in serious injury or even
death, we do not repeat the warning of potential serious injury or death each
time such a possibility is mentioned.
Never use near steps or swimming pools.
APPROPRIATE RIDER USE AND
PARENTAL SUPERVISION
This manual contains important safety information. It is your responsibility
to review this information and make sure that all riders understand all
warnings, cautions, instructions and safety topics and assure that young
riders are able to safely and responsibly use this product. Razor recommends
that you periodically review and reinforce the information in this manual
with younger riders, and that you inspect and maintain your children’s
RipRider 360° to insure their safety.
The RipRider 360˚ Caster Trike is intended for use on solid, flat, clean and dry
surfaces such as pavement or level ground without loose debris such as rocks
or gravel. Wet, slick or uneven and rough surfaces may impair traction and
contribute to possible accidents. Do not ride the RipRider 360˚ Caster Trike
in mud, ice, puddles or water. Avoid excessive speeds that can be associated
with downhill rides. Never risk damaging surfaces such as carpet or flooring
by use of a RipRider 360˚ Caster Trike indoors.
Maintain a hold on the handlebars at all times.
Never carry passengers or allow more than one person at a time to ride the
RipRider 360˚ Caster Trike.
Never use headphones or a cell phone when riding.
Never hitch a ride with another vehicle.
Do not ride at night or when visibility is impaired.
PROPER RIDING ATTIRE
Always wear proper protective equipment such as an approved safety
helmet. Elbow pads and kneepads are recommended. A helmet may be
legally required by local law or regulation in your area. Always wear shoes,
never ride barefooted or in sandals, and keep shoelaces tied and out of the
way of the wheels.
The recommended rider age of 5 and older for RipRider 360˚ Caster Trike is
only an estimate, and can be affected by the rider’s size, weight or skills.
Any rider unable to fit comfortably on the RipRider 360˚ Caster Trike should
not attempt to ride it. A parent’s decision to allow his or her child to
ride this product should be based on the child’s maturity, skill and
ability to follow rules.
FAILURE TO USE COMMON SENSE AND HEED THE
ABOVE WARNINGS INCREASES RISK OF SERIOUS
INJURY. USE WITH APPROPRIATE CAUTION AND
SERIOUS ATTENTION TO SAFE OPERATION.
Keep this product away from small children and remember that this product
is intended for use only by persons who are, at a minimum, completely
comfortable and competent while operating the RipRider 360°.
DO NOT EXCEED THE WEIGHT LIMIT OF 160 pounds.
Rider weight does not necessarily mean a person’s size is appropriate to fit
or maintain control of the RipRider 360˚ Caster Trike.
ACCEPTABLE RIDING PRACTICES AND
CONDITIONS
Always check and obey any local laws or regulations which may affect
the locations where the RipRider 360˚ Caster Trike may be used on public
property. The RipRider 360˚ Caster Trike is meant to be used only in
controlled environments free of potential traffic hazards and not on public
streets. Do not ride your RipRider 360˚ Caster Trike in any areas where
pedestrian or vehicle traffic is present.
1
Before You Begin
Remove contents from box and check parts against part diagram below. Remove the foam separators that protect the
components from damage during shipping. Inspect the contents of the box for scratches in the paint, or dents that may
have occurred during shipping. Because the Rip Rider 360˚ was partially assembled and packed at the factory, there
should not be any problems, even if the box has a few scars or dents.
q Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 15–20 minutes for assembly.
WARNING: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
RIPRIDER 360˚.
The RipRider 360˚ has been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
Front Fork Assembly
Steering Bolt
Seat
Front Wheel Assembly
Rear Caster Wheels
Pedal
q Required Tools
(2) 5mm
allen wrenches
(included)
10mm and 13mm
open wrenches
(included)
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at
www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
2
Assembly and Set-Up
q Attaching the Front Fork
Required Tools: 13mm open wrench and 5mm allen wrench
WARNING: Failing to
properly tighten the steering bolt
that attaches the handlebars can
cause you to lose control and fall.
1 Remove the steering bolt and
locknut from the frame assembly
with a 13mm open wrench and
5mm allen wrench.
2 Insert the front fork into the
frame assembly.
3 Be sure to properly align slot in
headset tube with pin on fork as
shown.
4 Re-insert the steering bolt
and secure with locknut using a
13mm open wrench and 5mm allen
wrench.
q Attaching the Front Wheel
Required Tools: 5mm allen wrench and 10mm open wrench
1 Remove the four coupling
bolts from the front fork with a
5mm allen wrench and 10mm
open wrench.
2 Insert the wheel assembly into
the front fork assembly and align
holes.
3 Re-insert the coupling bolts
through the front fork and secure
with allen wrench and open
wrench.
3
Assembly and Set-Up
q Attaching the Rear Caster Wheels
Required Tools: 5mm allen wrench
1 Locate the threaded hole on the
rear underside of the frame. Screw
caster wheel into hole.
2 Tighten with 5mm allen wrench.
q Attaching the Seat
Required Tools: (2) 5mm allen wrench
1 Remove the four coupling
bolts from the frame using two
5mm allen wrenches. One on top
and one on bottom.
2 Align four holes in seat with
four holes in frame. Insert coupling
bolts through the top and bottom
of the frame.
3 Tighten bolts using two 5mm
allen wrenches. One on top and
one on bottom.
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at
www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
4
RIPRIDER 360˚ Caster Trike Parts
Keep your RipRider 360˚ running for years with genuine Razor parts. Visit our web site to purchase replacement parts.
(Specifications subject to change without notice.)
1 Handlebar Grip
5 Lock Nut
2 Front Fork
6 Front Wheel Complete
3 Front Cover
7 75mm Rear Caster Wheels
4 Steering Bolt
8 Seat
5
Safety reminders
PRE-RIDE CHECKLIST
q
Loose Parts
q
Tire Care
q
Frame, Fork and Handlebars
q
Safety Gear
Check and secure all fasteners before every ride. Make sure
the steering bolt and casters are tight. There should not be any
unusual rattles or sounds from loose parts or broken components.
If you are not sure, ask an experienced mechanic to check.
Check for cracks or broken connections. Although broken frames
are rare, it is possible for an aggressive rider to crash into a curb
or wall and wreck and bend or break a frame. Get in the habit of
inspecting yours regularly.
Periodically inspect the tire for excess wear.
Always wear proper protective equipment such as an approved
safety helmet. Elbow pads and kneepads are recommended.
Always wear shoes (lace-up shoes with rubber soles), never ride
barefooted or in sandals, and keep shoelaces tied and out of the
way of the wheels.
DO NOT RETURN TO STORE
Do not use this product for the first time until you
have inflated the tires to the correct PSI.
Failure to follow these instructions may damage
your product and void your warranty.
Warranty
Razor Limited Warranty
The manufacturer warranties this product to be free of manufacturing defects
for a period of 6 months from date of purchase. This Limited Warranty does
not cover normal wear and tear, tire, or any damage, failure or loss caused by
improper assembly, maintenance, or storage or use of the Razor RipRider 360˚.
extended warranty, it must be honored by the store at which it was
purchased.
For your records, save your original sales receipt with this manual.
__________________________________________
This Limited Warranty will be void if the product is ever
• used in a manner other than for recreation;
• modified in any way;
• rented.
Item Number:
20036540
The manufacturer is not liable for incidental or consequential loss or damage
due directly or indirectly to the use of this product.
Razor does not offer an extended warranty. If you have purchased an
Need Help? Visit our web site for replacement parts, product support and a list of authorized service centers at
www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Patent Pending
Printed in China for:
Razor USA LLC
PO Box 3610
Cerritos, CA 90703
Copyright © 2009 Razor USA, LLC. All rights reserved. RAZOR and the Razor Logo Design
are among the registered trademarks of Razor USA LLC in the United States and/or select
foreign countries. RipRider is a trademark of Razor USA LLC.
6
102408