Samsung MH*** FN*A Series Installation manual

a.
hu
RJ100F5HX**
AJ100FCJ5**
lim
Air Conditioner
w
w
w
.k
ev
ek
installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/register
E S F I P D G DB98-32978A(4)
RJ100F5HXEA_IM_E_32978A(4).indd 31
2012-10-25 오후 5:22:56
Contents
ek
Safety precautions
lim
a.
hu
Safety precaution............................................................................................................................................................................................... 2
Accessories . ......................................................................................................................................................................................................... 4
Deciding on where to install the air conditioner . .............................................................................................................................. 5
Space requirement for outdoor unit . ...................................................................................................................................................... 6
Indoor/outdoor unit installation drawings............................................................................................................................................ 8
Refrigerant piping work.................................................................................................................................................................................. 9
Important information regarding the refrigerant use ...................................................................................................................11
Charging additional refrigerant ...............................................................................................................................................................12
Pump down operation .................................................................................................................................................................................12
Method for connecting wires . ..................................................................................................................................................................12
Setting indoor unit address . ......................................................................................................................................................................15
Setting installation option ......................................................................................................................................................................... 22
Installing transmitter and sub PCB for central control . ................................................................................................................ 24
How to use additional function . ............................................................................................................................................................. 26
Test run and final check .............................................................................................................................................................................. 27
Troubleshooting ..............................................................................................................................................................................................28
(Carefully follow the precautions listed below because they are essential to guarantee the safety of the equipment.)
.k
General information
ev
WARNING
• Always disconnect the air conditioner from the power supply before servicing it or
accessing its internal components.
• Verify that installation and testing operations are performed by qualified personnel.
• Verify that the air conditioner is not installed in an easily accessible area.
w
w
w
 Carefully read the content of this manual before installing the air conditioner and store the manual in a safe place in
order to be able to use it as reference after installation.
 For maximum safety, installers should always carefully read the following warnings.
 Store the operation and installation manual in a safe location and remember to hand it over to the new owner if the
air conditioner is sold or transferred.
 This manual explains how to install an indoor unit with a split system with two SAMSUNG units. The use of other types
of units with different control systems may damage the units and invalidate the warranty. The manufacturer shall not
be responsible for damages arising from the use of non compliant units.
 The air conditioner is compliant with the requirements of the Low Voltage Directive (72/23/EEC), the EMC Directive
(89/336/EEC), and the Directive on pressurized equipment (97/23/EEC).
 The manufacturer shall not be responsible for damage originating from unauthorized changes or the improper connection
of electric and hydraulic lines. Failure to comply with these instructions or to comply with the requirements set forth in the
“Operating limits” table, included in the manual, shall immediately invalidate the warranty.
 The air conditioner should be used only for the applications for which it has been designed: the indoor unit is not
suitable to be installed in areas used for laundry.
 Do not use the units if damaged. If problems occur, switch the unit off and disconnect it from the power supply.
2
RJ100F5HXEA_IM_E_32978A(4).indd 2
2012-10-25 오후 5:22:42
Safety precautions
General information
lim
a.
hu
ENGLISH
 In order to prevent electric shocks, fires or injuries, always stop the unit, disable the protection switch and contact
SAMSUNG’s technical support if the unit produces smoke, if the power cable is hot or damaged or if the unit is very noisy.
 Always remember to inspect the unit, electric connections, refrigerant tubes and protections regularly.
These operations should be performed by qualified personnel only.
 The unit contains moving parts, which should always be kept out of the reach of children.
 Do not attempt to repair, move, alter or reinstall the unit. If performed by unauthorized personnel, these operations
may cause electric shocks or fires.
 Do not place containers with liquids or other objects on the unit.
 All the materials used for the manufacture and packaging of the air conditioner are recyclable.
 The packing material and exhaust batteries of the remote control(optional) must be disposed of in accordance with
current laws.
 The air conditioner contains a refrigerant that has to be disposed of as special waste. At the end of its life cycle, the air
conditioner must be disposed of in authorized centers or returned to the retailer so that it can be disposed of correctly
and safely.
Installing the unit
w
w
.k
ev
ek
IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines.
Always disassemble the electric lines before the refrigerant tubes.
 Upon receipt, inspect the product to verify that it has not been damaged during transport. If the product appears
damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the installer or the
authorized technician has collected the material from the retailer.)
 After completing the installation, always carry out a functional test and provide the instructions on how to operate
the air conditioner to the user.
 Do not use the air conditioner in environments with hazardous substances or close to equipment that release free
flames to avoid the occurrence of fires, explosions or injuries.
 To prevent injury when accidentally touching the indoor unit fan, install the indoor unit at least 2.5m above the floor.
 The air conditioner should be used only for the applications for which it has been designed: the indoor unit is not
suitable to be installed in areas used for laundry.
 Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either
accessibility from both sides or ability to perform routine maintenance and repairs. The units’ components must be
accessible and that can be disassembled in conditions of complete safety either for people or things.
For this reason, where it is not observed as indicated into the Installation Manual, the cost necessary to reach and repair
the unit (in safety, as required by current regulations in force) with slings, trucks, scaffolding or any other means of
elevation won’t be considered in-warranty and charged to end user.
w
Power supply line, fuse or circuit breaker
 Always make sure that the power supply is compliant with current safety standards. Always install the air conditioner in
compliance with current local safety standards.
 Always verify that a suitable grounding connection is available.
 Verify that the voltage and frequency of the power supply comply with the specifications and that the installed power is
sufficient to ensure the operation of any other domestic appliance connected to the same electric lines.
 Always verify that the cut-off and protection switches are suitably dimensioned.
 Verify that the air conditioner is connected to the power supply in accordance with the instructions provided in the
wiring diagram included in the manual.
 Always verify that electric connections (cable entry, section of leads, protections…) are compliant with the electric
specifications and with the instructions provided in the wiring scheme. Always verify that all connections comply with
the standards applicable to the installation of air conditioners.
3
RJ100F5HXEA_IM_E_32978A(4).indd 3
2012-10-25 오후 5:22:42
Accessories
The following accessories are supplied with the air conditioner.
Accessories in the outdoor unit case
Flare Nuts, 15.88mm Flare Nuts, 9.52mm
outer pipe diameter outer pipe diameter
Drain Plug
Installation Manual
Tube connector
(Pipe 12.70mm;
Bolt 9.52mm)
Tube connector
(Pipe 12.70mm;
Bolt 15.88mm)
※ Attach Energy Label to the outdoor unit properly when installing.
Rubber Leg
a.
hu
2-wire
Assembly Cable
(option)
Energy Label
lim
3-wire
Power Cable
(option)
w
w
w
.k
ev
ek
≫ The 3-wire power cable and the 2-wire assembly cable are optional. If these cables are not supplied,
use the standard cable approved by IEC standard.
Please, check “Method for connecting wires” section.
4
RJ100F5HXEA_IM_E_32978A(4).indd 4
2012-10-25 오후 5:22:42
Deciding on where to install the air conditioner
A
When deciding on the location of the air conditioner with the owner, the following restrictions must be taken
into account.
ENGLISH
General
a.
hu
Do NOT install the air conditioner in a location where it will come into contact with the following elements :
◆ Combustible gases
◆ Saline air
◆ Machine oil
◆ Sulphide gas
◆ Special environmental conditions
◆ The air conditioner should be used only for the applications for which it has been designed : the indoor unit is not
suitable to be installed in areas used for laundry. If you must install the unit in such conditions, first consult your dealer.
Outdoor Unit
lim
.k
◆
◆
◆
ek
◆
The outdoor unit must NEVER be placed on its side or upside down, as the compressor lubrication oil will run into the cooling circuit and seriously damage the unit.
Choose a location that is dry and sunny, but not exposed to direct sunlight or strong winds.
Do not block any passageways or thoroughfares.
Choose a location where the noise of the air conditioner when running and the discharged air do not disturb any neighbours.
Choose a position that enables the piping and cables to be easily connected to the indoor unit and the recommended
length will be respected.
Install the outdoor unit on a flat, stable surface that can support its weight and does not generate any unnecessary
noise and vibration.
Position the outdoor unit so that the air flow is directed towards the outside, as indicated by the arrows on the top of the unit.
Maintain sufficient clearance around the outdoor unit, as indicated in page 8.
Make sure that the water dripping from the drain hose runs away correctly and safely.
ev
◆
◆
◆
◆
◆
w
w
w
◆ You have just purchased a Free Joint Multi air conditioner and it has been installed by your installation specialist.
◆ This device must be installed according to the national electrical rules.
◆ Max input power & current is measured according to IEC standard and input power & current is measured
according to ISO standard.
◆ More than 2 indoor units should be installed when you use Free Joint Multi air conditioner.
◆ Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either
accessibility from both sides or ability to perform routine maintenance and repairs.
The units’ components must be accessible and that can be disassembled in conditions of complete safety either for
people or things. For this reason, where it is not observed as indicated into the Installation Manual, the cost
necessary to reach and repair the unit (in safety, as required by current regulations in force) with slings, trucks,
scaffolding or any other means of elevation won’t be considered in-warranty and charged to end user.
◆ With an outdoor unit having net weight upper than 60kg, we suggest do not install it suspended on wall,
but considering floor standing one.
5
RJ100F5HXEA_IM_E_32978A(4).indd 5
2012-10-25 오후 5:22:42
Space requirement for outdoor unit
A
When installing 1 outdoor unit
1500 or more
300 or more
(Unit : mm)
※ When the air outlet is towards the wall
600 or more
ek
300 or more
lim
2000 or more
1500 or more
300 or more
a.
hu
※ When the air outlet is opposite the wall
300 or more
ev
300 or more
※ T he upper part of the outdoor unit and the air
outlet is towards the wall
w
※ T he upper part of the outdoor unit and the
air outlet is opposite the wall
1500 or more
w
.k
600 or more
※W
hen 3 sides of the outdoor unit are blocked
by the wall
※W
hen front and rear side of the outdoor unit is
towards the wall
When installing more than 1 outdoor unit
1500 or more
w
(Unit : mm)
※ When the air outlet is towards the wall
6
RJ100F5HXEA_IM_E_32978A(4).indd 6
2012-10-25 오후 5:22:42
When installing more than 1 outdoor unit
600 or more
600 or more
600 or more
lim
1500 or more
300 or more
※ When 3 sides of the outdoor unit are blocked by the wall
a.
hu
300 or more
ENGLISH
300 or more
(Unit : mm)
600 or more
600 or more
600 or more
3000 or more
.k
1500 or more
ev
ek
※ When front and rear side of the outdoor unit is towards the wall
3000 or more
300 or more
w
※ When front and rear side of the outdoor unit is towards the wall
w
Fixing the unit in position
w
The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level and
vibration, particularly if the outdoor unit is to be installed close to a neighbour.
If it is to be installed in a location exposed to strong winds or at a height, the unit must be fixed to an
appropriate support (wall or ground).
Position the outdoor unit so that the air flow is directed towards the
outside, as indicated by the arrows on the top of the unit.
2.
Attach the outdoor unit to the appropriate support using anchor bolts.
◆ The earthing wire for the telephone line cannot be used to earth the air
conditioner.
3.
620mm
360mm
1.
Rubber leg
If the outdoor unit is exposed to strong winds, install shield plates around
the outdoor unit, so that the fan can operate correctly.
≫ Certainly fix up its rubber leg in order to prevent its vibration and noise.
7
RJ100F5HXEA_IM_E_32978A(4).indd 7
2012-10-25 오후 5:22:42
A
Indoor/outdoor
unit installation drawings
◆ Piping outside diameter
Indoor unit
Outdoor unit
Power supply ø, V, Hz
**020/023/026/
030/035/052/
07/09/12/18/24**
RJ100F5HX**
AJ100FCJ5**
1,220-240,50/60
Outside diameter
Liquid
Gas
Unit
**020/023/026/
030/035/07/09/12**
**052/18**
3/8"
1/4"
200 mm
or more
lim
100 mm
or more
A
B
C
(h) (H)
D
E
.k
ev
300 mm
minimum
ek
160 mm or more
600 mm
minimum
300 mm
minimum
1/2"
5/8"
a.
hu
**24**
w
w
600 mm
minimum
Main power switch
w
◆ Piping length and the height
Dimension
Composition
1 Room max
length
25m
A, B, C, D, E
5 Room total max
length
80m
A+B+C+D+E
Max height between
Max height between
indoor unit & outdoor unit
indoor units
15m
7.5m
(H)
(h)
Make at least one round :
It will reduce noise and vibration
※ The appearance of the unit may be different from the diagram depending on the model.
8
RJ100F5HXEA_IM_E_32978A(4).indd 8
2012-10-25 오후 5:22:43
A
Refrigerant
piping work
Installing drain hose
Insert the drain plug into the drain hole on the underside of
the outdoor unit.
2.
Connect the drain hose to the drain plug.
3.
Ensure that condensation draining is adequate.
Drain hole
Drain hole
a.
hu
1.
ENGLISH
While heating, ice may accumulate. During the process of
defrosting, check if condensation draining is adequate.
For adequate draining, do the following :
lim
Cutting/extending the piping
1. Make sure that you have the required tools available (pipe cutter, reamer,flaring tool and pipe holder).
2. If you wish to shorten the piping, cut it using a pipe cutter, taking care to ensure that the cut edge remains at a
90° angle with the side of the pipe,and referring to the illustrations below for examples of edges cut correctlyand
incorrectly.
Rough
Burr
ev
ek
Oblique
3. To prevent any gas from leaking out, remove all burrs at the cut end of the pipe, using a reamer.
4. Slide a flare nut on to the pipe and modify the flare.
.k
Outer Diameter (D)
Thickness
Depth (A)
0.8mm
1.3 mm
ø9.52 mm(3/8")
0.8mm
1.8 mm
ø12.70 mm(1/2")
0.8mm
2.0 mm
ø15.88 mm(5/8")
0.8mm
2.2 mm
w
ø6.35 mm(1/4")
w
w
5. Check that the flaring is correct, referring to the illustrations below for examples of incorrect flaring.
Correct
Inclined
Damaged
Surface
Cracked
Uneven
Thickness
6. Align the pipes to be connected and tighten the flare nuts first manually and then with a torque wrench, applying the
following torque.
Outer Diameter (D)
Thickness
Torque (kgf·cm)
ø6.35 mm(1/4")
ø9.52 mm(3/8")
ø12.70 mm(1/2")
ø15.88 mm(5/8")
0.8mm
0.8mm
0.8mm
0.8mm
140~170
250~280
380~420
440~480
7. For further details on how to connect up to the outdoor unit and purge the circuit, refer to page 10.
≫ In case welding the pipe, the gas nitrogen must be blown into the parts.
9
RJ100F5HXEA_IM_E_32978A(4).indd 9
2012-10-25 오후 5:22:44
A
Refrigerant
piping work
Connecting refrigerant pipe
RJ100F5HX** / AJ100FCJ5**
Follow different orders depending on the capacity of indoor units.
OUTDOOR UNIT
A unit
**016/020/023/026/030/035**/AQV07/09/12**/AR07/09/12**
◆ Install pipes between indoor and outdoor units orderly as [A→B →C→D→E].
Indoor unit
**020/023/026/030/035/07/09/12**
**020/023/026/030/035/07/09/12**1⁾
**052/18**
**24**2⁾
1) Use tube connector (pipe 12.70mm, bolt 9.52mm)
2) Use tube connector (pipe 12.70mm, bolt 15.88mm)
E unit
ek
Purging air and checking gas leakage
D unit
lim
Port
A
B
C
D
E
C unit
a.
hu
**052**/AQV18/24**/AR18/24**
◆ Install pipes between indoor and outdoor units orderly as [ C→D→E].
B unit
ev
Purging air
1 Check the piping connections.
◆ Make the electrical connection and leave the system into “stand
by mode”. Do not turn on the system! This is necessary for better
vacuum operation (full OPEN position of Electronic Expansion
Valve - EEV -).
w
WARNING
.k
2 Connect the charging hose of low pressure side of manifold gauge to the
packed valve having a service port (5/8” Packed valve) as shown at the
figure (Value stem: 1/2” - 20UNF).
w
3 Open the valve of the low pressure side of manifold gauge
counter clockwise.
Vacuum
Pump
w
4 Purge the air from the system using vacuum pump for about 30 minutes.
- Close the valve of the low pressure side of manifold gauge clockwise.
- Make sure that pressure gauge show -0.1MPa(-76cmHg) after about
30 minutes. This procedure is very important in order to avoid gas leak.
- Turn off the vacuum pump.
- Remove the hose of the low pressure side of manifold gauge.
5 Set valve cork of both liquid side and gas side of packed valve to the
open position.
6 Mount the valve stem nuts and the service port cap to the valve, and
tighten them at the torque of 183kgf•cm with a torque wrench.
7 Check for gas leakage.
- At this time, especially check for gas leakage from the 3-way valve’s
stem nuts, and from the service port cap.
Valve stem
Stem cap
Service port
10
RJ100F5HXEA_IM_E_32978A(4).indd 10
2012-10-25 오후 5:22:44
Checking gas leakage
LEAK TEST WITH NITROGEN (before opening valves)
lim
LEAK TEST WITH R-410A (after opening valves)
Before opening valves, discharge all the nitrogen into the system and create vacuum
according to page 10.
After opening valves, check leaks using a leak detector for refrigerant.
a.
hu
In order to detect basic refrigerant leaks, before recreating the vacuum and
recirculating the R-410A, it’s responsible of installer to pressurize the whole system
with nitrogen (using a cylinder with pressure reducer) at a pressure above 30 bar
(gauge).
ENGLISH
Before completing the installation (insulation of the cables, hose and piping and fixing of the indoor unit to
the installation plate), you must check that there are no gas leaks.
Important information regarding the refrigerant use
ek
This product contains fluorinated greenhouse gases covered by
the Kyoto Protocol. Do not vent gases into the atmosphere.
Refrigerant type
GWP value
R410A
1975
※ GWP=Global Warming Potential
Contains fluorinated greenhouse gases
covered by the Kyoto Protocol.
Indoor unit
w
.k
ev
CAUTION :
Inform user if system contains 3 kg or more of fluorinated greenhouse gases.
In this case, it has to be checked for leakage at least once every 12 months, according to regulation N°842/2006. This activity has to be covered by qualified
personnel only.
In case situation above (3 kg or more of R-410A), installer (or recognised person
which has responsability for final check) has to provide a
maintenance book, with all the information recorded according to
REGULATION (EC) N°842/2006 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 17 May 2006 on certain fluorinated greenhouse gases.
w
w
Please fill in with indelible ink,
- ① the factory refrigerant charge of the product,
- ② the additional refrigerant amount charged in the field and
-①
+② the total refrigerant charge.
on the refrigerant charge label supplied with the product.
a. Factory refrigerant charge of the product: see unit name plate
b. Additional refrigerant amount charged in the field
(Refer to the above information for the quantity of
refrigerant replenishment.)
c. Total refrigerant charge
d. Refrigerant cylinder and manifold for charging

d
a
 = (
 = (
b
) kg
) kg

Outdoor unit
+ = (
) kg
c
≫ The filled-out label must be adhered in the proximity of the product
charging port (e.g. onto the inside of the stop valve cover).
11
RJ100F5HXEA_IM_E_32978A(4).indd 11
2012-10-25 오후 5:22:45
Charging additional refrigerant
A
If you install the excessive length of pipe, add additional refrigerant as 20g per unit meter ;
refer to the table below.
Refer to the Service Manual for more details on this operation.
Total connecting pipe length (L)
Adding refrigerant
RJ100F5HX**
AJ100FCJ5**
LT≤40m
LT>40m
Chargeless
(LT- 40m)x20g
a.
hu
Model
Pump down operation
A
PUMP DOWN (before disconnecing the refrigerant connections for unit
repair, removal or disposal)
lim
Pump-down is an operation intended to collect all the system refrigerant in the outdoor
unit. This operation must be carried out before disconnecting the refrigerant pipe in
order to avoid refrigerant loss to the atmosphere.
Shut off all the liquid valve with the Allen wrench.
2.
Turn the system on in cooling with fan operating at high velocity.
(Compressor will immediately start, provided 3 minutes have elapsed since the last
stop).
3.
After 2 minutes of operation, shut off the suction valves with the allen wrench.
4.
Turn the system off and switch mains supply off.
5.
Disconnect pipes. After disconnection, protect valves and tubing ends from dust.
6.
Compressor damage may occur if run at a negative suction pressure.
ev
ek
1.
.k
※ The designs and shape are subject to change according to the model.
w
Method for connecting wires
w
Selecting wires size
w
Silver solder
B
D
d1
E
F
L
d2
Nominal Nominal
dimensions dimensions Standard
Standard
Standard
Standard
for cable for screw dimension Allowance dimension Allowance dimension Allowance Min. Min. Max. dimension Allowance
(mm)
(mm)
(mm)
(mm)
2
(mm )
(mm)
(mm)
(mm)
(mm)
(mm)
t
Min.
0.75~1.5
4
6.6
±0.2
3.4
+0.3
-0.2
1.7
±0.2
4.1
6
16
4.3
±0.20
0.7
4
4
4
8.5
9.5
±0.2
5.6
+0.3
-0.2
3.4
±0.2
6
5
20
4.3
±0.20
0.9
12
RJ100F5HXEA_IM_E_32978A(4).indd 12
2012-10-25 오후 5:22:45
Method for connecting wires
A
Connecting wires
A-unit
F1
F2
1(L) 2(N)
F1
C-unit
F2
1(L) 2(N)
Indoor unit
F1
E-unit
D-unit
F2
1(L) 2(N)
F1
1(L) 2(N)
F2
F1
ENGLISH
1(L) 2(N)
B-unit
F2
Assembly cable
B
1
1 2
F1 F2
Earth
terminal
2
C
B
1 2
F1 F2
Earth
terminal
1 2
F1 F2
Earth
terminal
C
B
1
F1 F2
2
Earth
terminal
1 2
F1 F2
Earth
terminal
C
B
1 2
F1 F2
Earth
terminal
1(L) 2(N) 1(L) 2(N) 1(L) 2(N)
B
C
D
Cable Type : A
B
Cable Type : B
C
Cable Type : C
C
F1 F2
F1 F2 F1 F2
Communication cable
to indoor units
Main Power
Supply cable
ev
A
B
1 2
Earth
terminal
ek
Power cable to indoor units
F1 F2
Earth
terminal
lim
B
1(L) 2(N) 1(L) 2(N)
1 2
C
F1 F2
Earth
terminal
Outdoor unit
A
F1 F2
Earth
terminal
a.
hu
1 2
L
N
1
2
Earth
terminal
.k
A
Specification for circuit breaker and power supply cord
w
Power supply cord is not supplied with air conditioner.
Select the power supply cord in accordance with relevant local and national regulations.
Wire size must comply with the applicable local and national code.
Specifications for local wiring power supply cord and branch wiring are in compliance with local cord.
w
≫
≫
≫
≫
Model
w
Outdoor Unit
RJ100F5HX**
AJ100FCJ5**
Indoor Unit
5 ROOM
Outdoor Units
Rated
Hz
Volts
50
1phase, 220-240
Maximun Input Current [A]
Power Supply
Outdoor
Indoor(Max.)
Total
MCA
MFA
23.0
3.2
26.2
26.2
28.8
Notes
1.Power supply cords of parts of appliances for outdoor use shall not be lighter than polychloroprene sheathed
flexible cord. (Code designation IEC:60245 IEC 57 / CENELEC:H05RN-F)
2.Select power supply cord based on MCA.
3.MFA is used to select the circuit breaker and the ground fault circuit interrupter (earth leakage circuit breaker).
4.MCA represents maximum input current.
5.MFA represents capacity which may accept MCA.
6.Communication Cable Specification: 2G. 0.75mm2 or more.
Abbreviations
- MCA : Min. Circuit Amps. (A)
- MFA : Max. Fuse Amps. (A)
13
RJ100F5HXEA_IM_E_32978A(4).indd 13
2012-10-25 오후 5:22:45
Tightening power terminal
≫
≫
≫
≫
Connect the cables to the terminal board using the compressed ring terminal.
Use rated cables only.
Connect the cables with driver and wrench that can apply the rated torque to the screws.
Make sure that appropriate tightening torque is applied for cable connection. If the terminal is loose, arc heat may
occur and cause fire and if the terminal is connected too firmly, terminal may get damaged.
Tighten Torque(kgf • cm)
Position
M4
12.0~15.0
1(L), 2(N), L, N, F1, F2
Method for connecting wires
Checking correct earthing
a.
hu
Screw
If the power distribution circuit does not have an earth or the earth does not comply with specifications, an
earthing electrode must be installed. The corresponding accessories are not supplied with the air conditioner.
Select an earthing electrode that complies with the specifications
given in the illustration opposite.
2.
Determine a suitable location for the earthing electrode :
Carbon
plastic
lim
1.
Dig a hole of the size indicated in the illustration opposite, drive the
earthing electrode into position and cover the top of the electrode with
the excavated soil.
4.
Install a green/yellow insulated earthing wire (Ø1.6 mm, section 2 mm² or
greater) :
To earthing
screw
50 cm
.k
3.
PVC-insulated green
/yellow wire, 2mm² x 3.5 m
30 cm
ev
ek
◆ In damp hard soil rather than loose sandy or gravel soil that has a
higher earthing resistance.
◆ Away from underground structures or facilities, such as gas pipes,
water pipes, telephone lines and underground cables.
◆ At least two meters away from a lightening conductor earthing
electrode and its cable.
≫ The earthing wire for the telephone line cannot be used to earth the
air conditioner.
Steel core
Carefully check the installation, by measuring the earthing resistance
with an earthing resistance tester. If the resistance is above the required
level(Example:100Ω), drive the earthing electrode deeper into the ground
or increase the number of earthing electrodes.
w
5.
w
w
◆ If the earthing wire is too short, connect an extension lead, soldering
the connection and wrapping it with insulating tape (Do not bury the
soldered connection.)
◆ Secure the earthing wire in position with staples. If the earthing
electrode is installed in an area of heavy traffic, its wire must be
connected securely.j
6.
Connect the earthing wire to the earthing screw on the air conditioner.
14
RJ100F5HXEA_IM_E_32978A(4).indd 14
2012-10-25 오후 5:22:45
A
Setting indoor unit address
Setting indoor unit address automatically
ENGLISH
" to appear on the display of
◆ Switch the system on and wait for code "
the external unit (this requires approximately 60 seconds **).
"displays, press once the red button (K1) shown on
◆ As soon as code "
the figure on the side of the page :
◆ Position DIP switch 1 to ON.
◆ If the quantity of indoor units connected is lower than maximum
connectable to outdoor unit, the rotary switch SW01 has to be
positioned to select a number equal to indoor units’ quantity you
connected.
a.
hu
WARNING
lim
◆ After the operations described above have been performed, the system starts in Cooling or Heating mode, depending on the external ambient temperature. After a few minutes (from a minimum of 3 to 5 minutes for the internal unit), the system stops automatically, completing the self-test and addressing procedure.
"
" appears on the display of the external unit.
Display 1
K1
DIP
Switch
Rotary
Switch
<Display of the external unit>
※ During the initial 60 seconds,
display 1 shows in sequence :
00  0102 ...15 00...
ek
" (that confirms the correct execution
◆ 20 seconds after the display of "
of the procedure), the following codes (if four internal units are connected)
display in sequence on the display of the external unit:
Display 1 Display 2
Display 2
Description
The outdoor unit is communicating correctly with the indoor
unit connected to refrigerant pipe A.
ev
The outdoor unit is communicating correctly with the indoor
unit connected to refrigerant pipe B.
The outdoor unit is communicating correctly with the indoor
unit connected to refrigerant pipe C.
.k
The outdoor unit is communicating correctly with the indoor
unit connected to refrigerant pipe D.
w
The outdoor unit is communicating correctly with the indoor
unit connected to refrigerant pipe E.
At this point it is possible to start the internal units in the desired mode
w
w
"doesn’t display, the procedure has failed and it is therefore
≫ If "
necessary to read ALL the operator’s manual before repeating the operating described in steps 1-2-3-4.
15
RJ100F5HXEA_IM_E_32978A(4).indd 15
2012-10-25 오후 5:22:46
A
Setting
indoor unit address
Step 1
Review all the following elements in the installation:
◆ Installation site strength
◆ Piping connection tightness to detect any gas leakage
◆ Connection wiring
◆ Heat-resistant insulation of the piping
◆ Drainage
◆ Earthing wire connection
Step 2
IMPORTANT!
Before selecting switch, turn off the system power supply
lim
Rotary Switch
DIP Switch
Display 2
Display 1
ek
K1, K2, K3, K4
◆ When setting the indoor unit address manually, position DIP switch 1 to OFF.
◆ Adjust the rotary switch to the number of the connected indoor unit.
ev
WARNING
a.
hu
Setting indoor unit address manually
Follow of indication reported into table below for indoor unit addressing
≫ Refer to page 17 for indoor unit address setting.
Step 4
Turn on the system power supply and waiting for 60 seconds after estabilishing communication
between outdoor and indoor units.
During this phase, the left display of outdoor unit display PCB “DIS01” will count from 00--01--02 to 15.
Estabilished communication the left display will count sequentially:
00--communication with indoor unit A;
01--communication with indoor unit B;
02--communication with indoor unit C;
03--communication with indoor unit D;
04--communication with indoor unit E;
w
w
.k
Step 3
w
※ In case of Manual address mode,you can do pipe check operation for check whether you connect the pipes correctly or not. But you need set indoor address switch yourselves.
16
RJ100F5HXEA_IM_E_32978A(4).indd 16
2012-10-25 오후 5:22:46
ROTARY SWITCH “SW02” POSITION ACCORDING TO REFRIGERANT CIRCUIT CONNECTED ( 0=A; 1=B; 2=C; 3=D; 4=E )
Att. "B"
Att. "D"
Att. "C"
Att. "E"
1
0
2
A unit
ENGLISH
Indoor Unit
SW02
Att. "A"
OUTDOOR UNIT
3
B unit
4
C unit
TYPE
PICTURE
a.
hu
D unit
E unit
TO SET ADDRESSING MANUALLY BY
ROTARY SWITCH “SW02”
MODEL
lim
IT'S HERE!
MH020FV(N/A)**
MH023FB**
MH026FB(V/N/A)**
MH035FB(V/N/A)**
MH052FB(V/N/A)**
+
sw02
sw02
MH026FS**
MH035FS**
w
w
.k
SLIM 1 WAY
CASSETTE
MINI 4 WAY
CASSETTE
MAIN
PCB
ev
ek
RAC
MH030FM**
MH035FM**
MH052FM**
sw02
sw 02
SLIM DUCT
MSP-DUCT
MH026FE**
MH035FE**
NJ026LHX**
NJ035LHX**
MH052FU**
CONSOLE
MH026FJ**
MH035FJ**
MH052FJ**
w
sw02
MAIN
PCB
+
17
RJ100F5HXEA_IM_E_32978A(4).indd 17
2012-10-25 오후 5:22:48
A
Setting
indoor unit address
Setting indoor unit address manually
Setting option (AQV**/AJN**/AR**)
Entering mode for
setting option
a.
hu
Option setting mode
Mode change
High Fan Button
Low Temp Button
Low Fan Button
ek
lim
High Temp Button
 Setting option
1. Remove batteries from the remote controller.
2. Insert batteries and enter the option setting mode while pressing High Temp button and Low Temp button.
3. Each time you press Low Fan button, 7-seg on left side is increased by “1” and each time you press High Fan button, 7-seg on right side is increased by “1”.
4. You press
button to move to the next setteing page.
5. After setting option, press
ev




w
.k
button to check whether the option code you input is correct or not.



6. Press operation button
w
w


with the direction of remote control for set.
•SEG1, SEG7, SEG13, SEG19 are not set as page option.
• Set the SEG1, SEG7 as ON status and SEG13, SEG19 as OFF status.
EX) Set the each option separately since you cannot set the ADDRESS setting and indoor unit installation setting option at the same time.
18
RJ100F5HXEA_IM_E_32978A(4).indd 18
2012-10-25 오후 5:22:49
The procedure of setting option
Operation
Indication
ENGLISH
* Step 2
1. Press Low Fan button to enter SEG2 value.
2. Press High Fan button to enter SEG3 value.
* Step 3
Press Mode button to be change to Cool mode in the ON status.
1. Press Low Fan button to enter SEG4 value.
2. Press High Fan button to enter SEG5 value.
lim
* Step 4
Press Mode button to be changed to DRY mode in the ON status.
1. Press Low Fan button to enter SEG6.
2. Press High Fan button to enter SEG8.
a.
hu
* Step 1
1. Remove the batteries from the remote controller.
2. Insert batteries while pressing High Temp Button and Low Temp Button.
ek
* Step 5
Press Mode button to be changed to FAN mode in the ON status.
1. Press Low Fan button to enter SEG9 value.
2. Press High Fan button to enter SEG10 value.
ev
* Step 6
Press Mode button to be changed to HEAT mode in the ON status.
1. Press Low Fan button to enter SEG11 value.
2. Press High Fan button to enter SEG12value
.k
* Step 7
Press Mode button to be changed to AUTO mode in the OFF status.
1. Press Fan button to enter SEG14 value.
2. Press High Fan button to enter SEG15 value.
w
* Step 8
Press Mode button to be changed to Cool mode in the OFF status.
1. Press Low Fan button to enter SEG16 value.
2. Press High Fan button to enter SEG17 value.
w
w
* Step 9
Press Mode button to be changed to DRY mode in the OFF status.
1. Press Low Fan button to enter SEG18 value.
2. Press High Fan button to enter SEG20 value.
* Step 10
Press Mode button to be changed to FAN mode in OFF status
1. Press Low Fan button to enter SEG21 value.
2. Press High Fan button to enter SEG22 value.
* Step 11
Press Mode button to be changed to HEAT mode in the OFF status
1. Press Low Fan button to enter SEG23 value.
2. Press High Fan button to enter SEG24 value.
* Step 12
Press Mode button to check whether the option code you entered is correct or not.
Press operation button to enter option.
19
RJ100F5HXEA_IM_E_32978A(4).indd 19
2012-10-25 오후 5:22:49
A
Setting
indoor unit address
Setting indoor unit address manually
Setting an indoor unit address (MAIN/RMC)
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power Indoor Unit
supply in the indoor unit.
1(L)
2. The panel (display ) should be connected to an indoor unit to receive option.
2(N)
3. Before installing the indoor unit, assign an address to the indoor unit according
to the air conditioning system plan.
4. Assign an indoor unit address by wireless remote controller.
- The initial setting status of indoor unit ADDRESS (MAIN/RMC) is "0A0000-100000-200000-300000"
- There is no need to assign extra ADDRESS for 1:1 installation between indoor unit and outdoor unit.
a.
hu
Option No. : 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Explanation
SEG1
PAGE
SEG2
SEG3
MODE
Setting Main
address
Remote
Controller
Display
Indication Details Indication Details
Option
SEG7
Explanation
PAGE
.k
w
Main
address
1
setting
mode
SEG9
Setting RMC
address
0~9
100-digit
SEG10
0~9
10-digit
SEG11
Group
channel(*16)
0~9
A single
digit
SEG12
Group address
w
w
Remote
Controller
Display
A
SEG8
SEG6
A single digit of
indoor unit
No Main
address
ev
0
SEG5
100-digit of indoor 10-digit of indoor
unit address
unit
Indication Details Indication Details Indication Details Indication Details
0
Indication
and Details
SEG4
lim
Option
ek
F2
F1
Indication Details Indication Details
Indication
and Details
Indication Details Indication Details Indication Details Indication Details
0
No RMC
address
1
RMC
address
setting
mode
1
RMC1
1~F
RMC2
1~F
※ You must set RMC address setting mode when using the centralized Control .
20
RJ100F5HXEA_IM_E_32978A(4).indd 20
2012-10-25 오후 5:22:50
w
w
w
.k
ev
ek
lim
a.
hu
5. The MAIN address is for commnication between the indoor unit and the outdoor unit. Therefore, you must set it to
operate the air conditioner properly.
ENGLISH
• When “A”~”F” is entered to SEG4~6, the indoor unit MAIN ADDRESS is not changed.
• If you set the SEG 3 as 0, the indoor unit will maintain the previous MAIN ADDRESS even if you input the option
value of SEG4~6.
•If you set the SEG 9 as 0, the indoor unit will maintain previous RMC ADDRESS even if you input the option value of
SEG11~12.
21
RJ100F5HXEA_IM_E_32978A(4).indd 21
2012-10-25 오후 5:22:50
A
Setting
installation option
It could take maximum 60 minutes to operate for the protection of the compressor if the outdoor
temperature is below -5°C.
Ampere Limit Setting & Changing Procedure
a.
hu
Ampere
RJ100F5HX**
AJ100FCJ5**
Switch Selection
Switch
3
On
23A
(OFF)
20A
18A
Off
DIP Switch
<Outdoor PCB Display>
Off
On
.k
(OFF)
On
ev
On
(OFF)
4
lim
◆ Do not adjust the “Ampere Limit Switch(DIP Switch)”, if it’s not
necessary : before modifying it, evaluate the total number of electric and electronics loads consumption and use “Ampere limits switch(DIP Switch)” just as emergency solution or in case the system is anyway oversized compared to real thermal load needed.
◆ “Ampere Limit Switch(DIP Switch)” is initially set to the default value (table below).
◆ “Ampere Limit Switch(DIP Switch)” is on the PCB of outdoor unit.
◆ Contact the authorized service technician or dealer for setting and changing the “Ampere Limit Switch(DIP Switch)”.
◆ Before changing the “Ampere Limit Switch(DIP Switch)”, turn off the main power of the system.
ek
WARNING
16A
Off
w
Off
w
w
(OFF)
22
RJ100F5HXEA_IM_E_32978A(4).indd 22
2012-10-25 오후 5:22:50
Settings of PCB Display of the Outdoor unit
◆ Key Options of PCB Display
- K1 : pipe checking operation button
- K3 : Reset button
K2
1
Pipe Checking
Operation
(Display: )
Heat Mode Try run
(Display: )
2
-
Refrigerant Charging
)
(Display:
3
-
Cool Mode Try run
(Display: )
-
Pump down
)
(Display:
4
K3
K4
Reset
View mode
change
Display 1
Display 2
K1 K2 K3 K4
◆ K4 View mode Display changes
Display Explanation
Push
※ During the initial 60 seconds,
display 1 shows in sequence:
00→ 01→02 →...15→ 00...
Display Explanation
0
Present Compressor Frequency
Discharge temperature
1
Target Compressor Frequency
9
OLP temperature
2
EEV0 current step
10
Condenser temperature
3
EEV1 current step
11
Outdoor temperature
4
EEV2 current step
12
Running current
5
EEV3 current step
13
Target Discharge temperature
w
w
.k
ev
8
<Display of the external unit>
ek
lim
※ Heat and Cool Mode Try run functions are just For Service Technician
Push
a.
hu
K1
Push
ENGLISH
Key
- K2 : Function button
- K4 : View mode change button
EEV4 current step
14
Total capacity of the indoor units
7
Fan RPM (H: high, L: low, Blank: off)
15
Safety Control (just For Service Technician)
w
6
23
RJ100F5HXEA_IM_E_32978A(4).indd 23
2012-10-25 오후 5:22:51
Installing transmitter and sub PCB for central control
A
Transmitter installation (optional)
◆ RJ100F5HX** / AJ100FCJ5**
Accessories (Transmitter : MIM-B13B)
Transmitter
MAIN
485
DC Power Cable DC Power Cable Communication
Transmitter SUB Communication
(12V)
(5V)
Cable
Cable
Cable Tie
Case
R2 R1 R2 R1
R2 R1 R2 R1 R2 R1 R2 R1
R2 R1
R1
R2 R1 R2
R2R2R1
R1R1R2
R2R2R1
R1
R1 R2
R2 R1 R2 R1
R1 R2
R1 R2 R1 R2
Turn the power off and take off the cover of the outdoor units.
2.
Fix the case with bolts to the side of the control box referring to
the figure on the right side.
In case of FJM outdoor unit, there is not enough space to fix all
parts of transmitter. So you may use transmitter main PCB.
3.
Attach the transmitter main PCB to the case, then connect F1/
F2 lines, R1/R2 lines which are upper controller communication
cables and DC 12V power cables to the interface module referring
to the figure on page 13. (Upper controller power should be off.)
ek
lim
1.
You must check the position of dip switch on the transmitter's
main PCB and the main PCB of MH**/NJ** indoor units. For
AQV**/AJN**/AR** indoor units, refer to page 26.
5.
Assemble a cover of the outdoor unit and turn the power on.
6.
Check the communication status.
7.
If you install a transmitter to the outdoor unit, every indoor unit
which is connected to the outdoor unit can be controlled simultaneously.
Fix the case with hinges
(Control Box in the outdoor unit)
Outdoor unit PCB
w
w
.k
ev
4.
DC12V supply
Each outdoor unit connected to the same centralized controller
has its own transmitter.
w
8.
a.
hu
R1 R2
R1 R2
R1 R2
R1 R2
9.
R1 R2
Transmitter MAIN PCB
When using the centralized controller, refer to page 26 for indoor
unit setting.
F1
F2
F1
F2
Terminal block in the outdoor unit
24
RJ100F5HXEA_IM_E_32978A(4).indd 24
2012-10-25 오후 5:22:52
Sub PCB installation (optional)
If indoor unit is AQV**/AR**, install sub PCB.
ENGLISH
2. Take off the PCB cover.
ev
ek
lim
3. Attach the Sub PCB to the right side of the Panel frame.
a.
hu
1. Turn the power off and take off the front panel of the indoor unit.
.k
4. Find the PCB wire, and connect the wire to the Sub PCB as seen in the picture.
Sub PCB
w
w
5. Connect the wire (remote controller, central remote controller, etc.) to the sub PCB.
w
6. Assemble the panel frame and the front panel.
※ The product and accessories may look different from the illustration above depending on the model.
25
RJ100F5HXEA_IM_E_32978A(4).indd 25
2012-10-25 오후 5:22:53
A to use additional function
How
K1
SW05 K2
K3
K4
K5
SW06 K6
K7
K8
K9
SW07 K10
K11
K12
Function
On
Off
External room sesor
Disuse
Use
Centralized controller
Disuse
Use
Compensate RPM
Standard
Up
Drain Pump
Disuse
Use
+2°C
+5°C
Indoor Temperature
Compensation for Heating Mode
+5°C
+2°C
Filter Time
1,000h
2,000h
Hot Water Coil
Disuse
Use
External Control
Disuse
Use
External Control Output
Thermal ON Operation ON
◆ AQV**/AJN**/AR**
Remark
K1 K2 K3 K4
Only MH**FS/FU**, NJ***LHX**
Only MH**FS/FU**, NJ***LHX**
Only MH***FM**
Except MH***FV/FN/FB/FA/FJ**
Only MH**FS/FU**, NJ***LHX**
SW07
Indoor Unit
ev
SEG7
SEG8
PAGE
Indication Details Indication Details
1
Option
Explanation
2
Indication Details
0
SEG9
Indication Details
0
SEG13
SEG14
PAGE
External control
Indication Details Indication Details
w
Indication
and Details
SEG3
2
w
Option
Explanation
1(L)
2(N)
F2
F1
ek
lim
Indication
and Details
0
.k
Option
Explanation
SEG1
SEG2
PAGE
MODE
Indication Details Indication Details
w
Indication
and Details
SW06
K9 K10 K11 K12
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. The panel (display) should be connected to an indoor unit to receive option.
3. Befofe installing the indoor unit, assign an option to the indoor unit according
to the airconditioning system plan.
- The default setting of an indoor unit installation option is “02000-100000-
200000-300000”.
- Individual control of a remote controller(SEG20) is the function that controls an indoor unit individually when there is more than one indoor unit.
4. Set the indoor unit option by wireless remote controller.
- When entering address option, connect remote controller receiver.
Option
Explanation
SW05
K5 K6 K7 K8
a.
hu
No.
0
1
2
Disuse
On/Off control
Off control
Window On/
3
Off control1)
SEG20
SEG19
PAGE
Indication
Details Indication Details
Indication
and Details
3
0
0
SEG15
External control output
Indication Details
0
Thermo
ON
1
Operation
ON
SEG21
SEG4
SEG5
SEG6
Central control
Indication Details Indication Details Indication Details
0
Disuse
0
0
1
Use
SEG10
SEG11
SEG12
Master/Slave
Indication Details Indication Details Indication Details
0
Slave
0
0
1
Master
SEG16
SEG17
SEG18
Buzzer
Indication Details Indication Details Indication Details
0
Use
1
Disuse
0
SEG22
0
SEG23
SEG24
Indication Details Indication Details Indication Details Indication Details
0
0
0
0
▶ If you input a number other than 0~4 of the individual control of the indoor unit(SEG20), the indoor is set as "indoor 1".
1)
The window on/off function applies to the following unit
- AJN**/AR**
26
RJ100F5HXEA_IM_E_32978A(4).indd 26
2012-10-25 오후 5:22:54
Test run and final check
A
Test Run
2.
After 12 minutes of stationary condition check each indoor unit air treatment.
◆ Cooling mode (indoor unit check)  Inlet air temp. - Outlet air temp : From 10°K to 12°K (indicative delta T)
◆ Heating mode (indoor unit check)  Outlet air temp. - Inlet air temp : From 11°K to 14°K (indicative delta T)
a.
hu
Please do cool mode try-run or heat mode try-run.
◆ Cool mode try-run : Push the [K2] button three times.
◆ Heat mode try-run : Push the [K2] button once.
ENGLISH
1.
≫ In heating mode, the indoor fan motor can remain off to avoid cold air blown into conditioned space.
lim
Final Check and Explaining operation to the owner
Before leaving the premises on which you have installed the air conditioner, you should explain the following operations
to the owner, making reference to appropriate pages in the owner's instruction booklet.
How to start and stop the air conditioner.
2.
How to select the operating mode and adjust the temperature and fan settings.
3.
How to adjust the air flow direction.
4.
How to set the timers.
5.
How to remove and clean the filters.
≫ Once the owner is happy with the basic operations, hand over the owner's instruction booklet and this installation manual for storage in a handy and safe place.
w
w
w
.k
ev
ek
1.
27
RJ100F5HXEA_IM_E_32978A(4).indd 27
2012-10-25 오후 5:22:54
Troubleshooting
A
The table below give indication about self diagnostic routine. Some of error code requires activities
exclusively for Authorise Service Center.
◆ The error indicated on the PCB display of outdoor unit
EXPLANATION (The error indicated on the PCB display of outdoor unit)
DISPLAY
REMARK
Check electrical connection and setting
Outdoor unit communication error(Abnormal data from indoor unit over 60 packet)
Check electrical connection and setting
Indoor unit room temperature sensor error (Open/Short)
Indoor unit heat exchanger in temperature sensor error (Open/Short)
a.
hu
Communiaction error(indoor unable to receive data)
Indoor unit heat exchanger out temperature sensor error (Open/Short)
Indoor unit sensor error-Evaporator pipe in sensor - Self diagnosis
Indoor unit sensor error-Evaporator pipe out sensor - Self diagnosis
lim
Indoor Unit FAN Error
More than two indoor units cool and heat simultaneously
Indoor Unit EEPROM Error
EVA-MID BREAK AWAY
EVA-IN BREAK AWAY
ev
EVA-OUT BREAK AWAY
ek
Indoor Unit EEPROM Option Error
Failure of pipe check operation
Check piping connection and setting
No pipe check operation check
- occasion : try to operation after the installation through auto addressing mode without pipe check operation. Check setting
Check electrical connection and setting
Communication error between the outdoor and indoor unit
Check electrical connection and setting
.k
The number of Indoor unit mismatched
w
Outdoor communication error between main micom and inverter micom
Outdoor communication error beween main micom and hub micom
w
Outside temperature sensor error(Short/Open)
- Error level: over 4.9V(-50°C) under 0.4V(93°C)
Condenser temperature sensor error(Short/Open)
- Error level: over 4.9V(-50°C) under 0.4V(93°C)
w
Outdoor unit sensor error - Condenser out sensor(Short/Open) - Self diagnosis
Compressor Discharge temperature sensor error
Compressor discharge sensor detached - Self diagnosis
Compressor OLP sensor error (Short/Open)
- Error condition : outdoor temperature under -20°C
- Error level : over 4.95V(-30°C) under 0.5V(151°C)
EvaIn1 Sensor Short/Open
EvaIn2 Sensor Short/Open
EvaIn3 Sensor Short/Open
EvaIn4 Sensor Short/Open
EvaIn5 Sensor Short/Open
28
RJ100F5HXEA_IM_E_32978A(4).indd 28
2012-10-25 오후 5:22:54
EXPLANATION (The error indicated on the PCB display of outdoor unit)
ENGLISH
DISPLAY
REMARK
EvaOut1 Sensor Short/Open
EvaOut3 Sensor Short/Open
EvaOut4 Sensor Short/Open
EvaOut5 Sensor Short/Open
Outdoor unit freezing(Compressor stop)
lim
Outdoor unit overload - Safety control(Compressor stop)
a.
hu
EvaOut2 Sensor Short/Open
Outdoor unit high discharge temperature - Safety control (Compressor stop)
check pipe lenght, indoor unit filter,
refrigerant leakage/charge and
service port
check pipe lenght, refrigerant
leakage/charge
check pipe lenght, refrigerant
leakage/charge
Outdoor unit EEV open (Stopped indoor unit’s) -Self diagnosis
ek
Outdoor unit EEV open (operating indoor unit’s) -Self diagnosis
High temperature(over 30°C) of outdoor as heating mode
Outdoor Fan Error
ev
Low temperature(under -10°C) of outdoor as cooling mode
Communication cable mismatched between indoor and outdoor unit
Check electrical connection
.k
Inverter compressor starting failure (5 times)
w
Compressor trip by input current control mode (PFC over current)
Compressor trip by OLP temperature control mode
w
Over current
Compressor Vlimit Error
w
DC link Voltage error (under 150V, over 410V)
Abnormal compressor running (Compressor Rotation Error)
Current sensor error
DC link Voltage sensor error
Outdoor unit EEPROM Error
OTP Error
Inverter micom zero-crossing error
Over voltage Error
29
RJ100F5HXEA_IM_E_32978A(4).indd 29
2012-10-25 오후 5:22:55
a.
hu
lim
ek
ev
.k
w
w
w
"EEE Yönetmeliğine Uygundur"
"This EEE is compliant with RoHS"
RJ100F5HXEA_IM_E_32978A(4).indd 30
2012-10-25 오후 5:22:55
Appendix
Product
fiche
Energy Labeling Information(AC product)
According to Commission Regulation (EU) No 626/2011
Supplier's name
-
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
B
Model name
(Indoor/Outdoor)
-
AR09FSFP*** x 1
+ AR12FSFP*** x 1/
AJ040FCJ2EH
AR07FSFP*** x 2/
AJ040FCJ2EH
AR12FSFP*** x 1
+ AR18FSFP*** x 1/
AJ050FCJ2EH
C
Sound Power Level (Inside/
Outside)
dBA
55/61
D
Refrigerant name1)
-
R-410A
E
GWP
-
1975
F
SEER
6.1
a.
hu
A
53 / 61
55 / 61
R-410A
R-410A
1975
1975
5.7
5.8
Energy efficiency class (SEER)
-
A++
A+
A+
QCE2) (cooling season)
kWh/a
229
243
300
lim
G
H
Pdesignc
kW
4.0
4.0
5.0
SCOP
-
3.9
3.9
3.7
K
Energy efficiency class (SCOP)
-
A
A
A
L
QHE3) (heating season)
kWh/a
1077
1076
1395
M
Other heating seasons
suitable for use
-
Warmer Season
Warmer Season
Warmer Season
N
Pdesignh (Average)
kW
3.0
3.0
3.7
O
Pdesignh (Warmer)
kW
3.6
3.5
4.0
P
Pdesignh (Colder)
kW
-
Q
Declared capacity at reference
design conditions
kW
3.0
3.0
3.7
R
Assumed backup heating
capacity
kW
0
0
0
-
w
w
.k
ev
ek
I
J
w
1) Refrigerant leakage contributes to climate change. Refrigerant with lower global warming potential (GWP)
would contribute less to global warming than a refrigerant with higher GWP, if leaked to the atmosphere.
This appliance contains a refrigerant fluid with a GWP equal to [1975]. This means that if 1 kg of this refrigerant
fluid would be leaked to the atmosphere, the impact on global warming would be [1975] times higher than
1 kg of CO2 , over a period of 100 years.
Never try to interfere with the refrigerant circuit yourself or disassemble the product yourself and always ask a
professional.
2) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
3) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
1
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 1
2012-11-12 오후 3:59:55
Energy Labeling Information(AC product)
According to Commission Regulation (EU) No 626/2011
Supplier's name
-
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
B
Model name
(Indoor/Outdoor)
-
AR09FSFP*** x 3/
AJ052FCJ3EH
AR12FSFP*** x 3/
AJ068FCJ3EH
AR09FSFP*** x 4/
AJ070FCJ4EH
C
Sound Power Level (Inside/
Outside)
dBA
54 / 61
55 / 63
54 / 63
R-410A
R-410a
1975
1975
6.0
5.6
1)
D
Refrigerant name
-
R-410A
E
GWP
-
1975
SEER
Energy efficiency class (SEER)
-
5.7
A+
H
QCE2) (cooling season)
kWh/a
317
A+
A+
395
437
lim
F
G
a.
hu
A
Pdesignc
kW
5.2
6.8
7.0
SCOP
-
3.8
3.9
3.7
K
Energy efficiency class (SCOP)
-
A
A
A
3)
HE
(heating season)
ek
I
J
L
Q
kWh/a
1571
1981
2169
M
Other heating seasons
suitable for use
-
Warmer Season
Warmer Season
Warmer Season
Pdesignh (Average)
kW
4.3
5.5
5.8
Pdesignh (Warmer)
kW
4.8
6.3
6.4
P
Pdesignh (Colder)
kW
-
-
-
Q
Declared capacity at reference
design conditions
kW
4.3
5.5
5.8
R
Assumed backup heating
capacity
kW
0
0
0
w
.k
ev
N
O
w
w
1) Refrigerant leakage contributes to climate change. Refrigerant with lower global warming potential (GWP)
would contribute less to global warming than a refrigerant with higher GWP, if leaked to the atmosphere.
This appliance contains a refrigerant fluid with a GWP equal to [1975]. This means that if 1 kg of this refrigerant
fluid would be leaked to the atmosphere, the impact on global warming would be [1975] times higher than
1 kg of CO2 , over a period of 100 years.
Never try to interfere with the refrigerant circuit yourself or disassemble the product yourself and always ask a
professional.
2) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
3) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
2
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 2
2012-11-12 오후 3:59:55
A
Product
fiche
Energy Labeling Information(AC product)
According to Commission Regulation (EU) No 626/2011
Supplier's name
-
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
B
Model name
(Indoor/Outdoor)
-
AR09FSFP*** x 2
+ AR12FSFP*** x 2/
AJ080FCJ4EH
AR09FSFP*** x 5/
AJ100FCJ5EH
AR12FSFP***
+ AR24FSFP***/
AJ100FCJ5EH
C
Sound Power Level (Inside/
Outside)
dBA
55 / 63
D
Refrigerant name1)
-
R-410A
E
GWP
-
1975
F
SEER
5.3
54 / 70
60 / 70
R-410A
R-410A
1975
1975
6.0
5.5
G
Energy efficiency class (SEER)
-
A+
A
H
QCE2) (cooling season)
kWh/a
524
578
538
lim
A
a.
hu
A
Pdesignc
kW
8.0
10.0
8.6
SCOP
-
3.7
3.8
3.9
K
Energy efficiency class (SCOP)
-
A
A
A
L
QHE3) (heating season)
kWh/a
2180
2806
2761
M
Other heating seasons
suitable for use
-
Warmer Season
Warmer Season
Warmer Season
N
Pdesignh (Average)
kW
5.8
7.7
7.7
O
Pdesignh (Warmer)
kW
6.4
8.7
8.5
P
Pdesignh (Colder)
kW
-
-
-
Q
Declared capacity at reference
design conditions
kW
5.8
7.7
7.7
R
Assumed backup heating
capacity
kW
0
0
0
w
w
.k
ev
ek
I
J
w
1) Refrigerant leakage contributes to climate change. Refrigerant with lower global warming potential (GWP)
would contribute less to global warming than a refrigerant with higher GWP, if leaked to the atmosphere.
This appliance contains a refrigerant fluid with a GWP equal to [1975]. This means that if 1 kg of this refrigerant
fluid would be leaked to the atmosphere, the impact on global warming would be [1975] times higher than
1 kg of CO2 , over a period of 100 years.
Never try to interfere with the refrigerant circuit yourself or disassemble the product yourself and always ask a
professional.
2) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
3) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
3
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 3
2012-11-12 오후 3:59:55
Energy Labeling Information(AC product)
According to Commission Regulation (EU) No 626/2011
Supplier's name
-
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
B
Model name
(Indoor/Outdoor)
-
AR12FSSYAWTN x 1
+ AR18FSSYAWTN x 1/
AJ050FCJ2EH
AR09FSSYAWTN x 2
+ AR12FSSYAWTN x 2/
AJ080FCJ4EH
AJN016NDEHA x 1
+ AJN020NDEHA x 2/
AJ052FCJ3EH
C
Sound Power Level (Inside/
Outside)
dBA
59 / 61
58 / 63
47 / 61
D
Refrigerant name1)
-
R-410A
R-410A
R-410A
E
GWP
-
1975
1975
1975
F
SEER
5.3
5.7
5.8
a.
hu
A
Energy efficiency class (SEER)
-
A+
A
A+
QCE2) (cooling season)
kWh/a
300
524
320
lim
G
H
Pdesignc
kW
5.0
8.0
5.2
SCOP
-
3.7
3.7
3.8
K
Energy efficiency class (SCOP)
-
A
A
A
L
QHE3) (heating season)
kWh/a
1395
2180
1571
M
Other heating seasons
suitable for use
-
Warmer Season
Warmer Season
Warmer Season
N
Pdesignh (Average)
kW
3.7
5.8
4.3
O
Pdesignh (Warmer)
kW
4.0
6.4
4.8
P
Pdesignh (Colder)
kW
-
-
-
Q
Declared capacity at reference
design conditions
kW
3.7
5.8
4.3
R
Assumed backup heating
capacity
kW
0
0
0
w
w
.k
ev
ek
I
J
w
1) Refrigerant leakage contributes to climate change. Refrigerant with lower global warming potential (GWP)
would contribute less to global warming than a refrigerant with higher GWP, if leaked to the atmosphere.
This appliance contains a refrigerant fluid with a GWP equal to [1975]. This means that if 1 kg of this refrigerant
fluid would be leaked to the atmosphere, the impact on global warming would be [1975] times higher than
1 kg of CO2 , over a period of 100 years.
Never try to interfere with the refrigerant circuit yourself or disassemble the product yourself and always ask a
professional.
2) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
3) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
4
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 4
2012-11-12 오후 3:59:55
A
Product
fiche
Energy Labeling Information(AC product)
According to Commission Regulation (EU) No 626/2011
Supplier's name
-
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
B
Model name
(Indoor/Outdoor)
-
AJN026NDEHA x 2
+ AJN035NDEHA x 2/
AJ080FCJ4EH
AJN052NDEHA x 2/
AJ100FCJ5EH
MH026FSEA x 2
+ MH035FSEA x 2/
AJ080FCJ4EH
C
Sound Power Level (Inside/
Outside)
dBA
49 / 63
D
Refrigerant name1)
-
R-410A
E
GWP
-
1975
F
SEER
5.3
55 / 70
53 / 63
R-410A
R-410A
1975
1975
5.6
5.3
G
Energy efficiency class (SEER)
-
A
A
H
QCE2) (cooling season)
kWh/a
524
535
524
lim
A
a.
hu
A
Pdesignc
kW
8.0
8.5
8.0
SCOP
-
3.7
3.8
3.7
K
Energy efficiency class (SCOP)
-
A
A
A
L
QHE3) (heating season)
kWh/a
2180
2806
2180
M
Other heating seasons
suitable for use
-
Warmer Season
Warmer Season
Warmer Season
N
Pdesignh (Average)
kW
5.8
7.7
5.8
O
Pdesignh (Warmer)
kW
6.4
8.7
6.4
P
Pdesignh (Colder)
kW
-
-
-
Q
Declared capacity at reference
design conditions
kW
5.8
7.7
5.8
R
Assumed backup heating
capacity
kW
0
0
0
w
w
.k
ev
ek
I
J
w
1) Refrigerant leakage contributes to climate change. Refrigerant with lower global warming potential (GWP)
would contribute less to global warming than a refrigerant with higher GWP, if leaked to the atmosphere.
This appliance contains a refrigerant fluid with a GWP equal to [1975]. This means that if 1 kg of this refrigerant
fluid would be leaked to the atmosphere, the impact on global warming would be [1975] times higher than
1 kg of CO2 , over a period of 100 years.
Never try to interfere with the refrigerant circuit yourself or disassemble the product yourself and always ask a
professional.
2) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
3) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
5
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 5
2012-11-12 오후 3:59:55
Energy Labeling Information(AC product)
According to Commission Regulation (EU) No 626/2011
Supplier's name
-
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
B
Model name
(Indoor/Outdoor)
-
NJ026LHXEA x 2
+ NJ035LHXEA x 2/
AJ080FCJ4EH
MH052FUEA x 2/
AJ100FCJ5EH
MH020FAEA x 1
+ MH020FNEA x1/
AJ040FCJ2EH
C
Sound Power Level (Inside/
Outside)
dBA
53 / 63
D
Refrigerant name1)
-
R-410A
E
GWP
-
1975
F
SEER
5.3
58 / 70
53 / 61
R-410A
R-410A
1975
1975
5.6
5.7
G
Energy efficiency class (SEER)
-
A
A+
H
QCE2) (cooling season)
kWh/a
524
535
243
lim
A
a.
hu
A
Pdesignc
kW
8.0
8.5
4.0
SCOP
-
3.7
3.8
3.9
K
Energy efficiency class (SCOP)
-
A
A
A
L
QHE3) (heating season)
kWh/a
2180
2806
1076
M
Other heating seasons
suitable for use
-
Warmer Season
Warmer Season
Warmer Season
N
Pdesignh (Average)
kW
5.8
7.7
3.0
O
Pdesignh (Warmer)
kW
6.4
8.7
3.5
P
Pdesignh (Colder)
kW
-
-
Q
Declared capacity at reference
design conditions
kW
5.8
7.7
3.0
R
Assumed backup heating
capacity
kW
0
0
0
w
w
.k
ev
ek
I
J
w
1) Refrigerant leakage contributes to climate change. Refrigerant with lower global warming potential (GWP)
would contribute less to global warming than a refrigerant with higher GWP, if leaked to the atmosphere.
This appliance contains a refrigerant fluid with a GWP equal to [1975]. This means that if 1 kg of this refrigerant
fluid would be leaked to the atmosphere, the impact on global warming would be [1975] times higher than
1 kg of CO2 , over a period of 100 years.
Never try to interfere with the refrigerant circuit yourself or disassemble the product yourself and always ask a
professional.
2) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
3) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
6
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 6
2012-11-12 오후 3:59:55
A
Product
fiche
Energy Labeling Information(AC product)
According to Commission Regulation (EU) No 626/2011
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
B
Model name
(Indoor/Outdoor)
-
MH035FAEA x 1
+ MH052FAEA x 1/
AJ050FCJ2EH
MH026FAEA x 1
+ MH035FAEA x 1
+ MH026FNEA x 1
+ MH035FNEA x 1/
AJ080FCJ4EH
MH035FNEA x 1
+ MH052FNEA x 1/
AJ050FCJ2EH
C
Sound Power Level (Inside/
Outside)
dBA
59 / 61
55 / 63
55 / 61
D
Refrigerant name1)
-
R-410A
R-410A
R-410A
E
GWP
-
1975
1975
1975
F
SEER
5.3
5.8
5.8
lim
Supplier's name
a.
hu
-
A
G
Energy efficiency class (SEER)
-
A+
A
A+
H
QCE2) (cooling season)
kWh/a
300
524
300
5.0
8.0
5.0
3.7
3.7
Pdesignc
kW
SCOP
-
K
Energy efficiency class (SCOP)
-
L
QHE3) (heating season)
kWh/a
M
Other heating seasons
suitable for use
-
N
Pdesignh (Average)
O
Pdesignh (Warmer)
P
ek
I
J
3.7
A
A
2180
1395
Warmer Season
Warmer Season
Warmer Season
kW
3.7
5.8
3.7
kW
4.0
6.4
4.0
Pdesignh (Colder)
kW
-
-
-
Q
Declared capacity at reference
design conditions
kW
3.7
5.8
3.7
R
Assumed backup heating
capacity
kW
0
0
0
w
w
.k
ev
A
1395
w
1) Refrigerant leakage contributes to climate change. Refrigerant with lower global warming potential (GWP)
would contribute less to global warming than a refrigerant with higher GWP, if leaked to the atmosphere.
This appliance contains a refrigerant fluid with a GWP equal to [1975]. This means that if 1 kg of this refrigerant
fluid would be leaked to the atmosphere, the impact on global warming would be [1975] times higher than
1 kg of CO2 , over a period of 100 years.
Never try to interfere with the refrigerant circuit yourself or disassemble the product yourself and always ask a
professional.
2) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
3) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
7
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 7
2012-11-12 오후 3:59:56
Energy Labeling Information(AC product)
According to Commission Regulation (EU) No 626/2011
Supplier's name
-
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
Samsung Electronics
Co., Ltd.
B
Model name
(Indoor/Outdoor)
-
MH035FJEA x 1
+ MH052FJEA x 1/
AJ050FCJ2EH
MH026FJEA x 2
+ MH035FJEA x 2/
AJ080FCJ4EH
AR12FSSEDWUN x 1
+ AR18FSSEDWUN x 1/
AJ050FCJ2EH
C
Sound Power Level (Inside/
Outside)
dBA
59 / 61
59 / 63
56 / 61
D
Refrigerant name1)
-
R-410A
R-410A
R-410A
E
GWP
-
1975
1975
1975
F
SEER
5.3
5.8
5.8
a.
hu
A
Energy efficiency class (SEER)
-
A+
A
A+
QCE2) (cooling season)
kWh/a
300
524
300
lim
G
H
Pdesignc
kW
5.0
8.0
5.0
SCOP
-
3.7
3.7
3.7
K
Energy efficiency class (SCOP)
-
A
A
A
L
QHE3) (heating season)
kWh/a
1395
2180
1395
M
Other heating seasons
suitable for use
-
Warmer Season
Warmer Season
Warmer Season
N
Pdesignh (Average)
kW
3.7
5.8
3.7
O
Pdesignh (Warmer)
kW
4.0
6.4
4.0
P
Pdesignh (Colder)
kW
-
-
-
Q
Declared capacity at reference
design conditions
kW
3.7
5.8
3.7
R
Assumed backup heating
capacity
kW
0
0
0
w
w
.k
ev
ek
I
J
w
1) Refrigerant leakage contributes to climate change. Refrigerant with lower global warming potential (GWP)
would contribute less to global warming than a refrigerant with higher GWP, if leaked to the atmosphere.
This appliance contains a refrigerant fluid with a GWP equal to [1975]. This means that if 1 kg of this refrigerant
fluid would be leaked to the atmosphere, the impact on global warming would be [1975] times higher than
1 kg of CO2 , over a period of 100 years.
Never try to interfere with the refrigerant circuit yourself or disassemble the product yourself and always ask a
professional.
2) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
3) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
8
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 8
2012-11-12 오후 3:59:56
A
Product
fiche
Energy Labeling Information(AC product)
According to Commission Regulation (EU) No 626/2011
A
Supplier's name
-
Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd.
AR12FSSEDWUN
+ AR24FSSEDWUN/
AJ100FCJ5EH
60 / 70
Model name
(Indoor/Outdoor)
-
C
Sound Power Level (Inside/
Outside)
dBA
55 / 63
1)
D
Refrigerant name
-
R-410A
E
GWP
-
1975
SEER
Energy efficiency class (SEER)
-
5.3
A
H
QCE2) (cooling season)
kWh/a
524
Pdesignc
kW
SCOP
-
K
Energy efficiency class (SCOP)
-
3)
HE
(heating season)
R-410A
1975
5.5
A
538
8.0
8.6
3.7
3.9
A
A
ek
I
J
lim
F
G
a.
hu
B
AR09FSSEDWUN x 2
+ AR12FSSEDWUN x 2/
AJ080FCJ4EH
L
Q
kWh/a
2180
2761
M
Other heating seasons
suitable for use
-
Warmer Season
Warmer Season
Pdesignh (Average)
kW
5.8
7.7
Pdesignh (Warmer)
kW
6.4
8.5
P
Pdesignh (Colder)
kW
-
-
Q
Declared capacity at reference
design conditions
kW
5.8
7.7
R
Assumed backup heating
capacity
kW
0
0
w
.k
ev
N
O
w
w
1) Refrigerant leakage contributes to climate change. Refrigerant with lower global warming potential (GWP)
would contribute less to global warming than a refrigerant with higher GWP, if leaked to the atmosphere.
This appliance contains a refrigerant fluid with a GWP equal to [1975]. This means that if 1 kg of this refrigerant
fluid would be leaked to the atmosphere, the impact on global warming would be [1975] times higher than
1 kg of CO2 , over a period of 100 years.
Never try to interfere with the refrigerant circuit yourself or disassemble the product yourself and always ask a
professional.
2) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
3) Energy consumption “XYZ” kWh per year, based on standard test results. Actual energy consumption will
depend on how the appliance is used and where it is located.
9
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 9
2012-11-12 오후 3:59:56
[ESPAÑOL]
[FRANÇAIS]
[ITALIANO]
Nom du fournisseur
A
Nome del Costruttore
B
Nombre del modelo (unidad
interior/exterior)
B
Nom du modèle
(intérieur/extérieur)
B
Nome del Modello (Unità
Interna/Unità Esterna)
C
Nivel de potencia acústica
(interior/exterior)
C
Niveau de puissance acoustique
(intérieur/extérieur)
C
Livello di Potenza Sonora
(Unità Interna/Unità Esterna)
D
Nombre del refrigerante1)
D
Nom du fluide frigorigène1)
D
Tipo di refrigerante 1)
E
GWP
E
PRP
E
GWP
F
SEER
F
RES
F
SEER
G
Clase de eficiencia energética
(SEER)
G
Classe d'efficacité énergétique
(RES)
G
Classe di efficienza energetica
(SEER)
H
QCE2) (temporada refrigeración)
H
QCE2) (saison froide)
H
QCE2)
(stagione di raffreddamento)
I
Pdesignc
I
Pdesignc
I
Pprograffr.
J
SCOP
J
SCOP
J
SCOP
K
Clase de eficiencia energética
(SCOP)
K
Classe d'efficacité énergétique
(SCOP)
K
Classe di efficienza energetica
(SCOP)
L
QHE3) (temporada calefacción)
L
QHE3) (saison chaude)
L
QHE3) (stagione di riscaldamento)
M
Otras temporadas de
calefacción declaradas aptas
para funcionar
M
Adapté à d'autres saisons
chaudes
M
Altre stagioni per uso in
riscaldamento
N
Pdesignh (promedio)
Pdesignh (moyenne)
N
Pprogrisc (Climi Medi)
O
Pdesignh (plus chaud)
O
Pprogrisc (Climi Miti)
P
Pdesignh (plus froid)
P
Pprogrisc (Climi Freddi)
lim
a.
hu
A
ek
Nombre del proveedor
ev
A
N
Pdesignh (más cálida)
P
Pdesignh (más fría)
Q
Capacidad declarada en las
condiciones de diseño de
referencia
Q
Capacité déclarée à des
conditions de conception de
référence
Q
Potenzialità dichiarata per
le condizioni di progetto di
riferimento
R
Capacidad de calefacción de
reserva asumida
R
Capacité de chauffage
d'appoint supposée
R
Potenzialità di backup in
riscaldamento stimata
w
w
.k
O
Warmer season
w
[ESPAÑOL]: Temporada mas calida
[FRANÇAIS]: Saison plus chaude
[ITALIANO]: Stagione piu calda
10
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 10
2012-11-12 오후 3:59:56
A
Product
fiche
[PORTUGUÊS]
[DEUTSCH]
[EΛΛHNIKA]
Name des Lieferanten
A
Επωνυμία προμηθευτή
B
Nome do modelo (interior/
exterior)
B
Modellbezeichnung
(Innen-/Außengerät )
B
Ονομασία μοντέλου (εσωτερικού
χώρου/εξωτερικού χώρου)
C
Nível de potência sonora
(interior/exterior)
C
Schallleistungspegel
(Innen/Außen)
C
Στάθμη έντασης θορύβου
(Εντός/Εκτός)
D
Nome do fluido refrigerante1)
D
Name des Kältemittels1)
D
Ονομασία ψυκτικού μέσου1)
E
PAG
E
Treibhauspotenzial (Global
Warming Potential, GWP)
E
Δυναμικό Παγκόσμιας
Θέρμανσης (GWP)
F
SEER
F
Arbeitszahl im Kühlbetrieb
(SEER)
F
Λόγος Εποχιακής Ενεργειακής
Επάρκειας (SEER)
G
Classe de eficiência energética
(SEER)
G
Energieeffizienzklasse (SEER)
G
Κλάση ενεργειακής επάρκειας
(SEER)
H
QCE2) (estação de
arrefecimento)
H
QCE2) (Kühlperiode)
H
QCE2) (εποχή ψύξης)
I
Pdesignc
I
Pdesignc
I
Pdesignc
J
SCOP
J
Arbeitszahl im Heizbetrieb
(SCOP)
J
Εποχιακός Συντελεστής
Απόδοσης (SCOP)
K
Classe de eficiência energética
(SCOP)
K
Energieeffizienzklasse (SCOP)
K
Κλάση ενεργειακής επάρκειας
(SCOP)
L
QHE3) (estação de
aquecimento)
L
QHE3) (Heizperiode)
L
QHE3) (εποχή θέρμανσης)
M
Outras estações de
aquecimento utilizáveis
M
Weitere geeignete
Heizperioden
M
Κατάλληλο για χρήση σε άλλες
εποχές θέρμανσης
Pdesignh (μέσο)
lim
a.
hu
A
ek
Nome do fornecedor
ev
A
Pdesignh (média)
N
Pdesignh (mittel)
N
Pdesignh (mais quente)
O
Pdesignh (wärmer)
O
Pdesignh (θερμότερο)
P
Pdesignh (mais fria)
P
Pdesignh (kälter)
P
Pdesignh (ψυχρότερο)
Q
Capacidade declarada tendo
em conta as condições de
projecto de referência
Q
Ausgewiesene Leistung bei BezugsAuslegungsbedingungen
Q
Δηλωθείσα δυναμικότητα στις
συνθήκες σχεδίασης αναφοράς
Capacidade eléctrica de apoio
para aquecimento assumida
R
Leistung eines angenommenen
Ersatzheizgeräts
R
Δεδομένη εφεδρική
δυναμικότητα θέρμανσης
w
w
.k
N
O
w
R
Warmer season
[PORTUGUÊS]: Estação mais quente
[DEUTSCH]: Wärmere Jahreszeit
[EΛΛHNIKA]: Θερμότερες εποχές
11
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 11
2012-11-12 오후 3:59:56
[ESPAÑOL]
a.
hu
1) Las fugas de refrigerante contribuyen al cambio climático. Cuanto mayor sea el potencial de calentamiento
global (GWP) de un refrigerante, más contribuirá a dicho calentamiento su vertido a la atmósfera. Este aparato
contiene un líquido refrigerante con un GWP igual a [1975].
Esto significa que, si pasara a la atmósfera 1 kg de este líquido refrigerante, el impacto en el calentamiento
global sería, a lo largo de 100 años, [1975] veces mayor que si se vertiera 1 kg de CO2.
Nunca intente intervenir en el circuito del refrigerante ni desmontar el aparato usted mismo; consulte siempre
a un profesional.
2) Consumo de energía “XYZ” kWh/año, según los resultados obtenidos en ensayos estándar.
El consumo de energía real depende de las condiciones de uso del aparato y del lugar en el que esté instalado.
3) Consumo de energía “XYZ” kWh/año, según los resultados obtenidos en ensayos estándar.
El consumo de energía real depende de las condiciones de uso del aparato y del lugar en el que esté instalado.
[FRANÇAIS]
w
[ITALIANO]
.k
ev
ek
lim
1) La fuite de fluide frigorigène contribue au changement de climat. Le fluide frigorigène avec un potentiel de
réchauffement planétaire (PRP) plus bas contribue moins au réchauffement planétaire qu'un fluide frigorigène
avec un PRP plus haut, s'il s'échappe dans l'atmosphère. Cet appareil contient un fluide frigorigène avec un PRP
égal à [1975].
Cela signifie que si 1 kg de ce fluide frigorigène s'échappe dans l'atmosphère, l'impact sur le réchauffement
planétaire serait de [1975] fois plus haut qu'1 kg de CO2, sur une période de 100 ans.
N'essayez jamais d'interférer avec le circuit de fluide frigorigène ou de démonter le produit vous-même et
demandez toujours conseil à un professionnel.
2) Consommation énergétique “XYZ” kWh par an, basée sur des résultats de tests standard.
La consommation énergétique réelle dépend de la méthode d'utilisation de l'appareil et de sa situation
géographique.
3) Consommation énergétique “XYZ” kWh par an, basée sur des résultats de tests standard.
La consommation énergétique réelle dépend de la méthode d'utilisation de l'appareil et de sa situation
géographique.
w
w
1) Le fughe di refrigerante hanno impatto sull'ambiente. In caso di fughe in atmosfera refrigeranti con potenziale
di riscaldamento planetario (GWP) più basso contribuiscono al contenimento del riscaldamento della Terra.
Questo apparecchio contiene un refrigerante caratterizzato da un GWP pari a 1975.
Ciò significa che la dispersione in atmosfera di 1 kg di questo refrigerante nell'arco di un secolo ha un impatto
di 1975 volte maggiore di quello della dispersione di 1975 kg di CO2.
Occorre evitare nel modo più assoluto di manomettere o di smontare autonomamente il circuito frigorifero in
quanto tali operazioni devono essere obbligatoriamente svolte da personale qualificato.
2) Consumo di energia di “XYZ” kWh annui, riferiti ai risultati dei test eseguiti alle condizioni standard.
Il consumo di energia effettivo dipende comunque dalla modalità e dal luogo di funzionamento
dell'apparecchio .
3) Consumo di energia di “XYZ” kWh annui, riferiti ai risultati dei test eseguiti alle condizioni standard.
Il consumo di energia effettivo dipende comunque dalla modalità e dal luogo di funzionamento
dell'apparecchio .
12
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 12
2012-11-12 오후 3:59:56
A
Product
fiche
[PORTUGUÊS]
a.
hu
1) A fuga de fluido refrigerante contribui para as alterações climáticas. Os fluidos refrigerantes com menor
potencial de aquecimento global (PAG) contribuem menos para o aquecimento global do que os fluidos
refrigerantes com maior PAG, em caso de fuga para a atmosfera. Este aparelho contém um fluido refrigerante
com um PAG igual a [1975].
Isto significa que, se ocorrer uma fuga de 1 kg deste fluido refrigerante para a atmosfera, o seu impacto no
aquecimento global será [1975] vezes mais elevado do que o de 1 kg de CO2, durante um período de 100 anos.
Nunca tome a iniciativa de intervir no circuito do fluido refrigerante ou de desmontar este produto; recorra
sempre a um profissional.
2) Consumo de energia “XYZ” kWh por ano, com base nos resultados do teste normalizado. O valor real do
consumo de energia dependerá do modo de utilização do aparelho e da sua localização.
3) Consumo de energia “XYZ” kWh por ano, com base nos resultados do teste normalizado. O valor real do
consumo de energia dependerá do modo de utilização do aparelho e da sua localização.
lim
[DEUTSCH]
w
[EΛΛHNIKA]
.k
ev
ek
1) Kältemittelverlust trägt zum Klimawandel bei. Kältemittel mit niedrigerem Treibhauspotenzial (GWP) tragen im
Falle eines Entweichens in die Atmosphäre in geringerem Maße zur globalen Erderwärmung bei als Kältemittel
mit höherem GWP. Dieses Gerät enthält ein Kältemittel mit einem GWP von [1975].
Dies bedeutet, dass beim Entweichen von 1 kg dieses Kältemittels in die Atmosphäre die Auswirkungen auf die
globale Erderwärmung - über einen Zeitraum von 100 Jahren - [1975] Mal höher wäre als bei 1 kg freigesetztem
CO2.
Versuchen Sie niemals selbst, den Kühlkreislauf zu unterbrechen oder das Gerät auseinanderzubauen. Wenden
Sie sich stets an die entsprechenden Fachleute.
2) Energieverbrauch von „XYZ“ kWh pro Jahr, ausgehend von Standardtestergebnissen.
Der tatsächliche Energieverbrauch hängt von der Art der Verwendung sowie dem Aufstellungsort des Geräts
ab.
3) Energieverbrauch von „XYZ“ kWh pro Jahr, ausgehend von Standardtestergebnissen.
Der tatsächliche Energieverbrauch hängt von der Art der Verwendung sowie dem Aufstellungsort des Geräts
ab.
w
w
1) Η διαρροή ψυκτικού συμβάλλει στην κλιματική αλλαγή. Το ψυκτικό μέσο με το χαμηλότερο Δυναμικό
Παγκόσμιας Θέρμανσης (GWP) θα συμβάλλει λιγότερο στην παγκόσμια θέρμανση σε σύγκριση με ένα ψυκτικό
με υψηλότερο GWP, εάν υπάρξει διαρροή στην ατμόσφαιρα. Αυτή η συσκευή περιέχει ψυκτικό υγρό με GWP
ίσο με [1975].
Αυτό σημαίνει ότι, εάν διαρρεύσει στην ατμόσφαιρα 1 kg αυτού του ψυκτικού υγρού, η επίδραση στην
παγκόσμια θέρμανση θα είναι [1975] υψηλότερη από 1 kg CO2 , σε χρονική περίοδο 100 ετών.
Ποτέ μην επιχειρείτε να κάνετε οι ίδιοι παρεμβάσεις στο κύκλωμα του ψυκτικού υγρού ή να αποσυναρμολογείτε
οι ίδιοι το προϊόν και να ρωτάτε πάντοτε έναν επαγγελματία.
2) Κατανάλωση ενέργειας “XYZ” kWh το χρόνο, με βάση τα τυπικά αποτελέσματα των ελέγχων.
Η πραγματική κατανάλωση ενέργειας θα εξαρτηθεί από τον τρόπο χρήσης της συσκευής και το πού βρίσκεται.
3) Κατανάλωση ενέργειας “XYZ” kWh το χρόνο, με βάση τα τυπικά αποτελέσματα των ελέγχων.
Η πραγματική κατανάλωση ενέργειας θα εξαρτηθεί από τον τρόπο χρήσης της συσκευής και το πού βρίσκεται.
13
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 13
2012-11-12 오후 3:59:56
w
w
w
.k
ev
ek
lim
a.
hu
Memo
14
RJ100F5HXEA_IM_Product fiche_32978A(4).indd 14
2012-11-12 오후 3:59:56