Rose electronics QuadraVista Specifications

서울시 영등포구 문래동1가 39 센터플러스 1102호
Tel : 02) 2637-2429 Fax : 02) 2637-8429
www.naraevision.co.kr
E-mail : info@naraevision.co.kr
Orion X160 / X288
X288
DVI Matrix Switch
160 / 288-port DVI Matrix Switch
CATx or Fiber interface
Extend KVM stations / CPUs up to 450' over
CATx cable, 33,000' over fiber
Supports resolutions up to 1920 x 1200 @ 60Hz
Up to 288 I/O ports
Instant video switching
Options: USB 2.0, Analog or Digital audio, Serial,
and redundant power
Features and Benefits
Extend your KVM stations and computers:
Up to 33,000 feet (10Km) using
single-mode fiber cable
Up to 1,300 feet (400m) using
multi-mode fiber cable
Up to 450 feet (140m) using
CATx cable
Supports resolutions up to 1920 x 1200 @ 60Hz
and all DVI Single-Link resolutions including HighDefinition 1080p
Intuitive OSD for easy use and configuration at
each user station
Signal input to the Orion x160 / x288 can be via
CATx or Fiber cable; Signal output from the Orion
x160 / x288 can be via CATx or Fiber cable. You
can mix or match cable types depending on the
transmitter and receiver extender configuration.
Each port on the Orion x160 / x288 will
automatically be configured as an input or output
depending on the type of extender that is
connected. If a transmitter is connected, the port
becomes an input. If a receiver is connected, the
port becomes an output.
Scalable chassis allows you to add additional I/O
cards as your system grows.
(additional cards in increments of 8 ports)
Switch video sources of the same resolution
instantly with no delay or display blanking
Available options:
DVI or VGA input
Transparent USB 2.0
Serial
Analog or Digital audio
Redundant PSU
Rack mountable (19” / 9U)
The Orion™ x160 / x288 Advantage . . .
The Orion x160 / x288 offers new and unique features that
make it one of the most versatile and powerful products
available.
Video sources running at the same resolution can be
switched instantly with no delay or blanking which makes
it ideal for command centers, broadcast applications,
financial institutions, and many others.
The Orion x160 / x288 is available with 8 – 288 I/O ports.
The uniqueness of these ports is that they can be either
an input port or an output port. These I/O ports
automatically configure to an input or an output port
depending on whether a Transmitter or Receiver unit is
connected to it. This feature allows you to set-up the
Orion x160 / x288 to match your system. If you have 10
users and 100 computers, it can be set-up for 100 inputs
and 10 outputs. Any system configuration where the
inputs plus the outputs equals 160 (or 288 depending on
model) or less can be accommodated.
Most systems are configured for either Catx connectors or
fiber and both the inputs and outputs must match. The
Orion x160 / x288 allows you to mix or match cable types.
If you have a computer system 5 miles away, it can be
connected to the Orion x160 / x288 via Single-mode fiber
cable. The user station might be 20 feet away and this
can be connected using industry standard CATx cable,
greatly reducing the installation cost.
Transmitters and receivers consist of a main card and one
of seven optional cards.
Optional card
Main Card
WWW.ROSE.COM
Typical Application
Specifications
W-17.3” / 440mm D-10.5” / 270mm H-15.5” / 395mm
Resolution – 1920 x 1200 @ 60hz
Distance – CATx – 450’ (140m)
Multi-mode fiber (62.5µ) – 650’ (200m)
Multi-mode fiber (50µ) – 1,300’ (400m)
Multi-mode fiber (50µ OM3) – 3,300’ (1Km)
Single-mode fiber (9µ) – 33,000’ ( 10Km)
Interface – Input CATx or Fiber cable
Output CATx or Fiber cable
Connectors – RJ45 or LC Fiber
Control – On-screen display (at each KVM station)
(Web, FTP, Telnet, SMTP, Serial, IR)
Access your computers over CATx or Fiber cable
Overview
The Orion x160 / x288 system
consists of the main unit, a transmitter unit for
each connected computer and a receiver unit for
each connected KVM workstation. The transmitter
and receiver units are available in several
models. These models are selected to match the
computer and KVM workstations configuration.
The transmitter and receiver units are connected
to the Orion x160 / x288 using CATx cable,
single-mode fiber cable, or multi-mode fiber
cable.
If a computer has a dual-head video card, the
dual video transmitter and receiver would be
used. USB 2.0 transparent, analog or digital
audio and serial configurations can also be
added. The Orion x160 / x288 provides a truly
flexible and scaleable addition to your system.
Installation The Orion x160 / x288 can easily
be installed to streamline and simplify your system
requirements. There is no need to configure the I/O
ports because the unit automatically determines if
the port is an input or an output. When a transmitter
or receiver is connected to the unit it will
automatically acquire the transmitter or receiver ID,
save the configuration information and automatically
allocate the required ports. You can mix or match
transmitters or receivers connections to the Orion
x160 / x288 using CATx or fiber cable.
Options –
DVI-I input
USB 2.0 transparent
Serial
Analog Audio
Digital Audio
Ports – 8 to 288 (Expandable in 8-port cards)
Power – 90-240 VAC internal (Optional redundant PSU)
Available transmitters and receivers
Chassis – 2 boards - single p.s.u.
Chassis – 2 boards - redundant p.s.u.
Chassis – 4 boards – single p.s.u.
Chassis – 4 boards – redundant p.s.u.
Chassis – 6 boards
20-card rack
A
ABCDE-
B
C
D
DVI-D, USB-HID
DVI-I , USB-HID
USB Transparent
USB-HID
Analog audio (bidi) + RS232
E
F
FGHIJ-
G
H
I
J
Digital audio (unidi)
Analog audio (bidi) +
RS232 + USB-HID
Digital audio (unidi) + USB-HID
Digital audio (bidi)
Digital audio + analog audio +
RS232
Cards insert into the chassis or rack. Optional cards must be
combined with a main card. Cable connectors can be for CAT5,
single-mode fiber or multi-mode fiber
WWW.ROSE.COM
서 울 시 영 등 포 구 문 래 동 1가 39 센 터 플 러 스 11 02 호
Tel : 0 2 ) 2 6 3 7- 2 42 9
Fax : 02) 26 3 7 - 84 29
www. naraevision.co.kr
E-mail : info@naraevision.co.kr
QuadraVista HDMI
Quad Video Controller
Quad Video KVM Switch - HDMI
Resolutions up to 1920 x 1200
Auto or manual image adjustments
PiP function
Touch screen support
USB hub support
HDCP compliant
Features and Benefits
HDMI / DVI support (DVI via DVI to HDMI adapter)
Supports resolutions up to:
1920 x 1200 @ 50/60 Hz or
1600 x 1200 @ 75 Hz
Auto detection of input video signal and output
monitor resolutions
Control up to four HDMI sources on a single display
Adjustable quad video windows or full screen
display
Touch screen support
Picture-in-Picture support
Four analog audio inputs / 2 built in speakers
Local headphone and microphone jacks
Customizable display with 3D borders, labels,
volume bar, background picture and more.
Full keyboard and mouse control of the HDMI
source computers
Supports USB and PS/2 based computers
USB hub support for connecting USB printers,
cameras, flash drives, graphic tablets and other
USB compatible devices
Intuitive keyboard controls to:
Toggle a window on or off
Increase of decrease audio volume
Toggle full screen mode on or off
Switch audio source
Access and control the connected computers
from a remote laptop using our custom
access software
Two operating modes, Host and Remote,
are available
The QuadraVista™ HDMI Advantage .
The QuadraVista HDMI is a flexible and powerful
multi-viewer product with the capability to control
and monitor up to four HDMI video sources on a
single display. Each of the quadrants can be
adjusted and positioned to any size or location on
the display.
The QuadraVista HDMI can be accessed locally,
sending ASCII commands using HyperTerminal, or
from a third party controller for control over IP.
The QuadraVista HDMI provides simultaneous
support for HDMI and DVI video. The video
features that the QuadraVista HDMI incorporates
are:
Automatic sensing of the input signal
Picture-in-Picture
Video loss detection
Signal is automatically detected
The front panel LEDs indicate the mode the unit is
operating in. The MODE LED is green when the
unit is on-line and control is via the connected
keyboard and mouse. A yellow LED indicates that
the unit is controlled from a remote computer.
Each of the display windows can be resized,
repositioned, swapped, or locked to the present
window layout. These functions are easily
performed with a simple mouse click.
WWW.ROSE.COM
Typical Application
Part Numbers
QuadraVista HDMI
HD15 All-in-one cable
HDMI mm cable
USB A/B cable
+12VDC power adapter
Specifications
Dimensions
Width
6.9 in.
174 mm
Depth
10.3 in.
260.6 mm
Height
1.7 in.
44 mm
Weight
2.8 lbs
1.26 kg
Resolution
QuadraVista HDMI basics The QuadraVista HDMI
system consists of the main unit, four computers with
HDMI or DVI video ports (a DVI to HDMI adapter is
required for DVI video sources), USB keyboard and
USB mouse, speakers, microphone, USB peripherals
like a printer, web cam, digital camera, USB flash
drive or other compatible USB devices and the HDMI
display.
The QuadraVista HDMI can be set-up to display the
four video sources on the monitor, or in a PiP mode.
Each quadrant can be resized or re-positioned
anywhere on the display monitor. The video windows
can be swapped to any layout needed.
Installation The QuadraVista HDMI installation
consists of connecting the four HDMI video sources to
the unit, a USB keyboard and USB mouse, a set of
speakers, microphone, any USB peripherals needed
and the display monitor. With these connections the
unit can be operated from the local keyboard and
mouse. Connect a network cable to a router and the
network and access and control can be performed over
the network.
Operation Operating the QuadraVista HDMI is
performed using keyboard commands or mouse
functions. The keyboard commands can turn on or off
a display window, lock the display layout, load a preset
configuration file, switch the audio source and other
functions.
The mouse functions will display pop-up to switch from
quad screen to full screen, resize a window, swap
windows, access a remote computer and other
functions.
Up to 1920 x 1200 @ 50/60 Hz
1600 x 1200 @ 75Hz
Power
Input: 100-240 VAC 50/60 Hz
Output: 12 VDC, 5 A, 60 watts
Connectors
Front:
1- USB Type A - Keyboard
1- USB Type A - Mouse
2- USB 2.0 Type A
1- Microphone
1- Headphone
1- USB Type B (Remote
Keyboard/mouse control)
Rear:
4- DB15 (For computer’s USB /
PS-2 / Audio)
4- HDMI (For computer’s video in)
1- HDMI (For DVI monitor)
1- RJ45 (Ethernet )
1- Power jack
Indicators
PC1/2/3/4 – Computer active/standby
Mode
Mode – Host or Remote
Pwr – Power on / off
Operating Temp 32°F-104°F (0°C - 40°C)
Storage Temp
-4°F-122°F (-10°C- 50°C)
Humidity
0%-80% non-condensing
Approvals
FCC / CD / C-Tick / Class B
Rear View
서 울 시 영 등 포 구 문 래 동 1가 39 센 터 플 러 스 11 02 호
Tel : 0 2 ) 2 6 3 7- 2 42 9
Fax : 02) 26 3 7 - 84 29
Wna
Wrae
Wvi.sR
SE.COM
www.
ionO
.co.kr
E-mail : info@naraevision.co.kr
QuadraVista 2
Quad Video Controller
Quad Video with USB Support
Display four computers simultaneously on
a single monitor
Touch-screen capability
View live, real-time data in each window
Easily switch to and control each computer in
Quad or Picture-in-Picture (PiP) mode
Connect a USB 2.0 port to any or all computers
VGA and single link DVI video support available
High Quality video up to 1920 x 1200 (DVI)
Features and Benefits
The QuadraVista 2™
2™ Advantage . . .
Four view modes available: Single, Dual, Quad,
and PiP modes.
Monitor and operate the connected computers using
a touch-screen monitor
Connects to four computers making each video
source viewable and controllable on a single monitor
Quad mode displays four computers on one screen
PiP mode displays one computer display full screen
with three thumbnail displays
Dual mode displays the left half of two channels
Easy-Find active window feature
Connect up to 4 USB 2.0 devices and connect one
device to any computer
On-screen menus for easy set-up, configuration, and
use. Crisp, clear, high quality video
Video resolution up to 1920 x 1200 @ 60 Hz for DVI
video and 1600 x 1200 @ 60hz for VGA video.
Keyboard commands and front panel controls for
changing display modes
Switch to and control any of the four screens while
monitoring the other three connections in real time.
VGA and single link DVI video support
Supports USB computers, PS/2 computers, including
SUN and MAC
Connect to KVM switches to view and control
multiple computers, routers, Ethernet switches or
other devices
Deploy with Rose CrystalView Fiber Extenders to
view and control computers up to six miles away
Rack mount kits available in 19”, 23”, and 24” sizes
Quick and simple to install
All Rose Electronics products come
with a 30-Day Money Back Guarantee and
free Technical Support
Flash memory technology allows for
fast and reliable upgrades.
The QuadraVista 2 professional Quad Video KVM
Switch represents the latest in KVM video splitting
technology at affordable prices. The QuadraVista 2
allows a user to connect to, control, and display four
computers on a single monitor or access a KVM
switch to connect multiple computers.
The advanced design of the QuadraVista 2 provides
four viewing modes: Quad Screen, Dual screen,
Picture-in-Picture (PiP) and Full Screen. Control of a
selected computer can be done while in any of the
three modes. View four computers in the quad
screen mode and control any one of them while
monitoring, in real time, the other three computers.
In the PiP mode you can view one display on a full
screen while monitoring smaller displays of the
other three computers.
The on-screen menus make configuring, monitoring,
and computer and USB switching quick and easy.
An On-Screen display can be opened to identify the
active window.
The QuadraVista 2 supports all combinations of both
VGA and single link DVI video cards and monitors.
Each CPU port can be configured for VGA or DVI
(analog or digital) and QuadraVista 2 can process
these signals simultaneously. The video can be
viewed on a digital or analog monitor.
Connect a touch-screen monitor and operate, and
control the connected computers. Add a USB device
and connect it to any of the computers.
Be more productive, organized and efficient with
the dynamic, new QuadraVista 2, Quad
video KVM Switch, from Rose Electronics.
Real-time quad view
WWW.ROSE.COM
Typical Application
Models The QuadraVista 2 Quad Video KVM Switch
is available in a single-user, four computer model.
Adding KVM switches to it can expand the system to
1,000s of computers and serial devices.
Cables Cable connections on the QuadraVista 2 to
the user station are USB for the keyboard and mouse,
and DVI for the video. Connections to the computers
are USB or PS/2 for the keyboard and mouse and DVI
for the video.
Installation QuadraVista 2 is easy to install. Simply
connect up to four computers and a user station to
the QuadraVista 2 ports. Access the on-screen menu
with a simple keystroke, configure each computer
connection for VGA or DVI and save it in flash
memory.
Operation QuadraVista 2 is very easy to operate.
Once installed, you can switch full screen to any of
the four connected computers and fully control that
computer from your user station. Switch to a
connected computer using the front panel pushbuttons or using simple keyboard commands. Switch
to the Quad screen mode and view the four
computers on one screen. You can fully control one
of the four computers while viewing the other three in
real time. Each USB port (1-4) can be easily routed to
any or all computers.
Video The QuadraVista 2 will automatically determine
the video resolution of the KVM video monitor and
each of the four connected computer’s video. Video
input formats that are supported range from 640 x 350
@ 85Hz to 1900 x 1200 @ 60Hz. Video output
formats that are supported range from
640 x 480 @ 85Hz to 1900 x 1200 @ 60 Hz and
SUN 1152 x 960 @ 66Hz.
Keyboard and Mouse The QuadraVista 2 uses a USB
keyboard and mouse on the user side and either a
USB or PS/2 keyboard and mouse for each computer
connection.
Flash Memory To support the latest devices,
QuadraVista 2 contains flash memory. We provide
free, lifetime firmware upgrades, available from our
FTP site.
On--screen Menu The on-screen menu allows you to
On
access the intuitive interface to set-up the system,
console, and computers. The system configuration
defines the Hot Keys, the menu position, and reset to
factory default settings.
The computer menu allows you to manually configure
the video input and output format, horizontal screen
position, and VGA/DVI connection.
A help menu is available which shows a list of the
keyboard commands, firmware and hardware revision
levels and contact information.
Rack Mount Rack mount kits are available to mount the
QuadraVista 2 in a standard 19”, 23”, of 24” rack.
Part number
Model
CPU ports
QV-4KVMUDVI
4
RM-QVxx
Rackmount kit (xx= 19”, 23”, or 24”)
Specifications
Dimensions 17.2W x 9.15D x 1.75H (in)
436.9W x 232.4D x 44H (mm)
Weight
6.1lbs / 2.77kg
Connectors Power – IEC320
CPUs – DVI, PS/2 or USB
4 USB 2.0 Type A ports
User station – DVI, USB
RS232 – RJ12 (6-pin)
Power
90 – 240 VAC, auto-switching
40 Watts
Resolution
Up to 1900 x 1200 @ 60 Hz (DVI
1600 x 1200 @ 60 Hz (VGA)
Controls
Power on/off switch, port selector
switches
Single/Quad/PIP mode
Indicators
Chassis Power, CPU select
Chassis
Electro-galvanized steel, black powder
coated (Top cover)
Environmental 0°C – 45°C / 0% –80% RH non-condensing
Approvals CE
Rear View
서 울 시 영 등 포 구 문 래 동 1가 39 센 터 플 러 스 11 02 호
Tel : 0 2 ) 2 6 3 7- 2 42 9
Fax : 02) 26 3 7 - 84 29
www. naraevision.co.kr
E-mail : info@naraevision.co.kr
UltraVista SX
2x2 VIDEO WALL
UltraVista SX Video wall
Distortion-free display
Supports analog and digital outputs
Displays a single-link DVI-D video source
across 4 DVI or VGA output screens
Resolution up to 1920 x 1200
HDTV resolution @ 1080p or 1080i
Features and Benefits
Benefits
The UltraVista SX Advantage . . .
Single-Link DVI-D input
Supports analog and digital LCD displays
Resolutions up to 1920 x 1200 / 1080 p/i
(minimum resolution – 800 x 600)
Input source is displayed on 4 displays,
each showing ¼ of the image (2 x 2 video
wall)
Easy, simple installation
No additional hardware or software needed
Learn mode for obtaining the DDC
specifications (DDC table) from a PC,
Mac, or from the connected monitors
Ideal for:
Video walls
Information displays
Training / education centers
Convention centers
And many more applications
The UltraVista SX is the ideal product for
displaying your high definition images and
video over a 2x2 video wall. The display is
shown in real time with ¼ of the input image
shown on each of the four VGA or DVI
screens.
UltraVista SX supports resolutions up to
1920 x 1200 single-link digital video input and
up to 1920 x 1200 digital or analog video
outputs. For VGA analog monitor connections
a DVI to VGA adapter must be used.
The UltraVista SX is one of the easiest video
wall products to install. Just connect a singlelink DVI-D high-resolution video source to the
DVI input connector. Connect four DVI or
VGA monitors to the DVI-I output connectors.
Download the DDC information (using the
front panel buttons and display) from a PC, a
Mac, or from the display screen. That’s it, no
software to load, no hardware to add or video
cards to configure. Simple, easy, straight
forward installation is what makes UltraVista
SX so attractive.
UltraVista SX maintains the original resolution
quality of the input image on all monitors,
producing a crisp, clear, perfect image.
Display a video source
across four displays
Typical Application
Part Numbers
Part #
VWL-S122DV
VSP-2DVI
UltraVista SX
Video
Splitter
Models The UltraVista SX is available in a 2 x 2
real-time video wall system. The unit has one
DVI-D video input and four DVI video outputs.
Cables Cable connections to the UltraVista SX
are DVI-D video cables or DVI/VGA adapters for
using VGA displays.
Installation The UltraVista SX installation is a
very easy and simple process. It consists of
connecting the DVI-D video source to the DVI
input port. Then connect the four output ports to
the DVI video displays. There is no additional
software or hardware to install or configure.
For local viewing, Rose Electronics offers several
DVI video splitter models that allow you to view
the video signal locally. If extended distances are
needed our line of DVI CATx or fiber extenders
can extend the distances up to 33,000 feet.
Video The UltraVista SX can obtain and save the
DDC information from a PC, a Mac, or from the
monitor connected to output port #4. The front
panel display configures this option.
Description
Video Wall unit, 2x2 display
Video Splitter, 1 video input, 2 video
output (DVI-D)
Specifications
Dimensions 17.0W x 7.0D x 1.75H (in)
431.8W x 177.8D x 44.45H (mm)
Weight
4.05lbs / 1.83kg
Resolution Single-Link DVI – 1920 x 1200
VGA – 1920 x 1200
HDTV – 1080p or 1080i
Bandwidth 165 MHz
Connectors Power – +5VDC-3A
Video in – DVI-D (Single-Link)
Video out – DVI-I
Power
100 – 240 VAC, auto-switching
50/60 Hz, 40 Watts to 5VDC / 3A power
adapter
Controls
Scroll / Enter buttons
Temperature
Operating 0°C – 35°C / 32°F – 95°F
Storage
-20°C – 50°C / -4°F – 122°F
Humidity
0% –80% RH non-condensing
Front / Rear view
서 울 시 영 등 포 구 문 래 동 1가 39 센 터 플 러 스 11 02 호
Tel : 0 2 ) 2 6 3 7- 2 42 9
Fax : 02) 26 3 7 - 84 29
www. naraevision.co.kr
E-mail : info@naraevision.co.kr
UltraVista LC
Video Wall
Video Controller / Splitter
Video Wall
Display a single video input on an array of monitors
Models available in a 2x2, 3x3, and 1x4 (Horizontal)
High Definition video output up to 1920 x 1200)
Supports video input resolutions up to 3840 x 2400
Expandable to produce a 4 x 4 array or a 9 x 9 array
Display mode automatically selected depending on
input resolution
The UltraVista LC Advantage . . .
Features and Benefits
Supports Dual link DVI video input
Single-link DVI video outputs
Models:
2x2 - 1 dual-link DVI input /
4 single-link DVI outputs
3x3 - 1 dual-link input /
9 single-link DVI outputs
1x4 – 1 dual-link DVI input /
4 single-link DVI outputs
(monitors orientated horizontally)
Supports video input resolutions up to
3840 x 2400
Output resolutions up to 1920 x 1200
Depending on input resolution, the display
mode is automatically set for:
Clone mode (Same image on all
monitors)
Split mode (Same image on each row)
Video wall mode (Image split over all
displays)
Easy adjustments for bezel compensation
Expand a 2x2 model easily to a 4x4 display,
a 3x3 model to a 6x6 or a 9x9 display array.
Configure the 1x4 model with 4 monitors
arranged horizontally
Adjustments and control can be performed
using a remote control or commands from
a connected computer using the OSD
functions
Compatible with most monitor that
supports DVI input. Displays can be LCD,
HD Plasma, DLP, Projectors, or others.
The UltraVista LC is the product of choice for those who
have the need to produce a high quality, inexpensive
video wall. Models are available for a 1x4, 2x2, or 3x3
video wall. The 2x2 and 3x3 models can be expanded to
produce a 4x4 or a 9x9 video array.
Connect the UltraVista LC directly to a laptop or desktop
computer with a single DVI cable and instantly the hidefinition computer image is displayed on a large video
wall. No extra set-up is required because the UltraVista
LC automatically detects the correct settings.
UltraVista LC requires a high resolution dual link DVI input
from the video source. The video source is split directly
over the display array with no image scaling or
adjustments. Control of the UltraVista LC can be
performed remotely using the remote control or from a
connected computer with an RS232 serial port.
The UltraVista LC can be automatically configured to
produce three output modes; video wall mode, clone
mode, and replication mode. These modes are
automatically configured based on the input resolution
received from the video source.
The video wall mode accurately splits the input image
over the display array.
The clone mode displays the same image on all monitors.
The replication mode shows the same image on each row
of monitors.
Display Modes
Video wall
Clone
Replication
Typical Application
Specifications
P/N
VWL-B114D
VWL-B122D
VWL-B133D
Description
1x4 video wall (Horizontal)
2x2 video wall
3x3 video wall
Dimensions:
Width
(in /
mm)
2x2
9.1/230
11.6/295
3x3
1x4
9.1/230
Video:
Dual link
Resolution
Models:
The UltraVista LC is available in 3 models:
The 2 x 2 - Displays a single DVI video source on a 2x2
video wall (expandable to a 4x4 video wall)
The 3 x 3 - Displays a single DVI video source on a 3x3
video wall (expandable to a 9x9 video wall)
The 1 x 4 - Displays a single DVI video source on a 1x4
video wall (4 horizontal DVI displays)
Cables: A dual-link DVI-D cable is used to connect the
graphic card output to the UltraVista LC DVI input. The
DVI monitors used can connect directly to the DVI output
connectors. If a greater distance is needed between the
UltraVista LC and the monitors or from the computer
video source to the UltraVista LC, Rose Electronics’ DVI
extender line can extend the distance to 450 feet over
CATx cabling or up to 33,000 feet over fiber cable.
Installation:
on: Installing the UltraVista LC is a very quick
Installati
and easy process. Connect the DVI video displays, the
high definition video source, RS232 cable, and the power
adapter to the unit, Power on the monitors, the UltraVista
LC unit, and controlling computer. Adjust the output
screen resolution, and the bezel settings and you’re
done.
Depth
(in /
mm)
7.0/178
7.4/188
7.0/178
Height
(in /
mm)
1.85/47
1.85/47
1.85/47
Weight
(lbs /
kg)
DVI-D
Input – up to 3840 x 2400
Output – up to 1920 x 1200
Connectors:
DVI in
Dual-link DVI-D female
DVI out
Single-link DVI-D
Power
Male barrel jack
Controls:
Front Panel push buttons
Power:
Adapter – 90-264 VAC in / +12V out
(2x2 – 10W / 3x3-17W)
Operating
Temp.
32ºF - 104ºF (0ºC - 40ºC)
Approvals:
CCC, CE, FCC
Rear Panel
Operation: Operating the UltraVista LC is almost
automatic. Provide the high-resolution image to display
on the video wall and the unit does the rest. In an
expanded system, only the master unit needs to be setup. UltraVista LC will adjust the remote unit for a
smooth image transition between displays.
Top – VWL-B122D (2x2)
Bottom – VWL-B133d (3x3)
Resolution / Mode selection tables
1 x 4 model resolution table
Mode Input
Output
Resolution Resolution
1x3
2544x480
848x480
2400x600
800x600
2880x600
960x600
3072x768
1024x768
1x4
3392x480
848x480
3200x600
800x600
3840x600
960x600
4092x768
1024x768
2 x 2 model resolution table
Mode Input
Output
Resolution Resolution
1x1
1024x768
1024x768
2x1
2560x1024 1280x1024
3840x1080 1920x1080
3840x1200 1920x1200
2x2
2048x1536 1024x768
2560x2048 1280x1024
2560x1440 1280x720
2560x1600 1280x800
2720x1536 1360x768
3840x2880 1920x1440
3840x2160 1920x1080
3840x2400 1920x1200
2560x1920 1280x960
1280x960
640x480
3392x1920 1696x960
1696x960
848x480
3 x 3 model resolution table
Mode Input
Output
Resolution Resolution
2x3
2048x2304 1024x768
2560x2400 1280x800
2560x3072 1280x1024
2720x2304 1360x768
3x2
3072x1536 1024x768
3840x1600 1280x800
3840x2048 1280x1024
4080x1536 1360x768
3x3
3072x2304 1024x768
3840x2160 1280x720
3840x2400 1280x800
3840x3072 1280x1024
4080x2304 1360x768
1920x1440 640x480
3840x2880 1280x960
서 울 시 영 등 포 구 문 래 동 1가 39 센 터 플 러 스 11 02 호
Tel : 0 2 ) 2 6 3 7- 2 42 9
Fax : 02) 26 3 7 - 84 29
www. naraevision.co.kr
E-mail : info@naraevision.co.kr
CrystalView EX5
DVI, USB 2.0 KVM Extender
KVM Extender
Extend your high definition Video, keyboard,
mouse, and USB 2.0 devices, over CATx cable.
Supports resolutions up to 1920 x 1200
Three USB port available on the receiver unit
Standard USB hubs can be used to increase the
number of USB devices connected to a
maximum of 13 and 4 hub levels.
Supports USB keyboards, mice, printers,
scanners, flash drives, touch screens, web cams,
game controllers, and many more USB device
types
Easy installation
Features and Benefits
Supports uncompressed HD DVI video with resolutions up
to 1920 x 1200, 24-bit color depth
Supports USB 2.0 (high-speed / 480 Mb/s),
USB 2.0 and 1.1 (Full-speed / 12 Mb/s, and
USB 2.0 and 1.1 (Low-speed / 1.5 Mb/s
Extend your workstation up to 330 feet over CAT5e or better
cable.
3-USB port available on the receiver unit
Standard USB hubs can be used to increase the maximum
number of connected USB devices to 13 and 4 USB hubs.
Up to 500 mA of power is available at each USB port for
powering high-power USB devices
Plug-and-Play installation, no configuration or set-up
needed.
Installation consists of:
1. Connecting the receiver to your DVI monitor, USB
keyboard and mouse, speakers and USB device(s)
2. Connect the transmitter to your computer’s DVI video
port and USB port.
3. Connect the transmitter to the receiver with up to 330
feet of CAT5e or better cable.
Apply power and the installation is complete.
Transmitter / Receiver require a +5VDC power adapter
The CrystalView™ EX5 Advantage
The CrystalView EX5 KVM extender is the
extender of choice for extending your
workstation up to 330 feet from your
computer. You can fully operate and control
all of your computer functions as if you were
directly connected.
Access to your computer is made convenient
in a variety of situations. You can locate
users away from hazardous environments
where the computer is located, locate devices
away from areas vulnerable to theft, reduce
noise and heat; increase desk and floor
space.
If additional USB devices are needed, you
can add up to 4 USB hubs to the three port
receiver model and connect up to 13 USB
devices.
The CrystalView EX5 extender supports all
USB 2.0 devices. It is ideal for use in
industrial control areas, digital signage,
connecting cameras for security systems,
USB device printing, scanning and storage.
Supports all major operating systems
including:
®
®
Windows , MAC , and Linux
®
Supports USB printers, scanners, web cameras,
USB hard drives, flash drives, MP3 players and
more.
WWW.ROSE.COM
Typical Application
Specifications
Dimensions
(in)
(mm)
Distance
Resolution
with a USB hub In addition to the three USB
Expanding with
ports on the receiver unit, you can add up to 4 standard USB
hubs to the receiver unit to access additional USB devices.
Connecting 4 USB hubs to the receiver will increase the
number of USB devices that can be connected to a maximum
of 13 devices and 4 hubs.
Transmitter / Receiver Kit
1.18
30
DVI-D (Video out)
Link RJ45
(3) USB Type A
Power +5VDC, 3A power adapter
Indicators
Transmitter
Receiver
Power
Status – Green LED
Link – Green LED
Video – Green / Amber LED
USB – Green / Amber LED
Status – Green LED
Link – Green LED
Video – Green / Amber LED
USB – Green / Amber LED
Transmitter +5V DC / 3.0A
Receiver +5V DC / 1A
Receiver
output
500mA per USB output port (3)
at each USB port.
Environment
40°C)
Operating Temp. 32°F-104°F (0°CStorage Temp. -4°F-158°F (-20°C-
70°C)
Operating Humidity – 20%-80%
Storage Humidity – 10%-90%
(Humidity = non-condensing)
Part Numbers
CRK-1DTXT-EX5
Height
DVI-D (Video in)
USB Type B
Link RJ45
Power +5VDC, 3A power adapter
Control your computer up to 330 feet (100m) away
Installation
Installation Installing the CrystalView EX5 extender is as
simple as connecting the computer to the transmitter unit,
connecting the receiver unit to your workstation equipment
and connecting the transmitter and receiver together with
CAT5 cable.
4.4
112
uncompressed - 1920 x 1200
24-bit color depth
Remote
pairs, a transmitter unit and a receiver unit. The transmitter
unit connects to your computer and the receiver unit connects
workstation. The transmitter and receiver unit are connected
together with up to 330 feet of CAT5e or better cable. The
receiver unit supports up to 4 USB hubs for adding additional
USB devices.
Depth
6.9
175
330 feet (100m)
Connectors
Local
Overview The CrystalView EX5 extender is usually sold in
Width
Approvals
Compliance
FCC Class A, CE, ICES-003
RoHS
Receiver
Transmitter
Rear View
서 울 시 영 등 포 구 문 래 동 1가 39 센 터 플 러 스 11 02 호
Tel : 0 2 ) 2 6 3 7- 2 42 9
Fax : 02) 26 3 7 - 84 29
www. naraevision.co.kr
E-mail : info@naraevision.co.kr
CrystalView DVI Quad
Digital CAT5/Fiber Extender
Digital CATx/Fiber KVM extender
Extends keyboard, quad video, and mouse
signals up to 33,000 feet over Singlemode fiber
Supports DVI-D video at resolutions up to
1920 x 1200 @60Hz over all allowed distances;
1280 x 1024 @75Hz over all allowed distances
User selectable DDC table
Serial and Audio support on all models
Supports Singlemode and Multimode fiber cables
PS/2 and USB keyboard and mouse support
All models provide Dual access
Easily adapted to your system
Features and Benefits
The CrystalView™ DVI Quad Advantage
Supports:
4x DVI-D Singlelink video modes
PS/2 or USB keyboards and mice (HID only)
Optional USB 2.0 support
Optional CWDM upgrade
(Sends all data, including USB over a single pair
of singlemode fiber cables)
Bi-Directional serial
Full CD Quality stereo audio
Extend a KVM station from a quad-head CPU
using fiber cable up:
460ft (140m) w/ CATx Cable
656ft (200m) w/62.5µm Multimode-Fiber
1300ft (400m) w/ 50.0µm Multimode-Fiber
3280ft (1000m) w/50.0µm Multimode-Fiber OM3
33,000ft (10,000m) w/9.0µm Singlemode-Fiber
Video resolutions up to 1920 x 1200 @ 60Hz
Supports 18/24–Bit color
(18 Bit-CATx / 24 Bit-Fiber)
Quad video model
Local access on all models
Compatible with all operating systems
Fully automatic KVM sharing
Easy installation and operation
The CrystalView DVI Quad is the KVM extender of choice for
businesses that need to extend and operate a quad-head
computer from a great distance. The CrystalView DVI Quad
makes this possible by the use of Catx, singlemode or
multimode fiber cable. You can fully operate and control a
computer or server from as far away as 6 miles using 9 µm
singlemode fiber. The CrystalView DVI Quad supports all
combinations of DVI-D monitors and video cards.
The system consists of two units; a transmitter and a
receiver. The transmitter connects to your CPU’s keyboard,
DVI-D quad video ports, and mouse connectors. The
receiver connects to a keyboard, four DVI-D video monitors
and mouse or KVM station. The transmitter and receiver are
connected together with CATx or fiber cable depending on
your model. The receiver can be up to 6 miles from the
transmitter using 9µm Singlemode.
All models are available with both transmitter and receiver
KVM access. The transmitter’s KVM access allows an
additional KVM station to be connected to the transmitter
unit.
Extend quad video up to
33,000 feet over singlemode
fiber cable
Typical Application
Specifications
Dimensions
Transmitter
Receiver
Quad-head DVI Video model
Digitally access a quad-head computer
locally and remotely
over CATx or Fiber
CrystalView DVI Quad basics The CrystalView DVI
Quad system consists of a transmitter that connects to a
PC and a receiver that connects to a keyboard, four DVI
monitors, and a mouse. The transmitter and receiver
units are connected together with up to 6 miles of
standard fiber cable or 460 feet over CATx cable.
Models The CrystalView DVI Quad is available in a
PS/2 and USB model, CATx or Fiber model. All models
allow for a second KVM station next to the PCs,
providing operation from the transmitter or the receiver
unit.
Installation Installing the CrystalView DVI Fiber units is
as easy as connecting the KVM station to the receiver,
connecting the CPU to the transmitter, and connecting
the transmitter to the receiver with fiber or CATx cable.
19.0W x 5.50D x 1.75H (in)
483 W x 140D x 44.5H (mm)
Operating Temp +5˚C – 45˚C / 41˚F – 113˚F
Storage Temp
-25˚C – 60˚C / -13˚F – 140˚F
Humidity
80% max, non-condensing
Resolution
1920 x 1200 @60Hz over all allowed
distances all lower resolutions with
refresh rates of at least 75Hz
Connectors
Video – DVI – I
Keyboard – MiniDIN6 / USB Type A
Mouse – MiniDIN6 / USB Type A
Fiber – LC fiber
Audio – 3.5mm stereo audio jack
Seiral – DB9F
Power
90-240 VAC
Max distance
460ft (140m) CATx
656ft (200m) w/62.5µm MM-Fiber
1300ft (400m) w/50.0µm MM-Fiber
3280ft (1000m) w/50.0µm MM-Fiber OM3
33,000ft (10,000m) w/9.0µm SM-Fiber
Serial Data:
Baud Rate - up to 19,200
Data Flow - Format independent
Flow control – Xon / Xoff
Audio Data:
Signal level 5V p-p
Impedance 47KΩ
Connectors 3.5mm stereo jack
Transmission 16 bit, 38.4KHz Digitized
audio
Microphone - Powered or un-powered
Speakers – Powered
Keyboard and Mouse emulation The CrystalView
DVI Quad uses a microprocessor to emulate the
keyboard and mouse. Only the transmitter unit has to be
connected for the PC to boot properly.
Part Numbers –Fiber & CATx Extender kits
Part Number
Description
CRK-2DTXUD4DP/AUD
Quad head DVI, HID, PS/2, Audio/Serial, CATx
CRK-2DTXTD4DP/AUD
Quad head DVI, USB 2.0, PS/2, Audio/Serial, CATx
CRK-2DFMUD4DP/AUD
Quad head DVI, HID, PS/2, Audio/Serial,
Multimode Fiber
CRK-2DFMTD4DP/AUD
Quad head DVI, USB 2.0, PS/2, Audio/Serial,
Multimode Fiber
CRK-2DFSUD4DP/AUD
Quad head DVI, HID, PS/2, Audio/Serial,
Singlemode Fiber
CRK-2DFSTD4DP/AUD
Quad head DVI, USB 2.0, PS/2, Audio/Serial,
Singlemode Fiber
CRK-2DCWUD4DP/AUD
Quad head DVI, HID, PS/2, Audio/Serial, CWDM
CRK-2DCWTD4DP/AUD
Quad head DVI,USB 2.0, PS/2, Audio/Serial, CWDM
kits include transmitter and receiver units
서 울 시 영 등 포 구 문 래 동 1가 39 센 터 플 러 스 11 02 호
Tel : 0 2 ) 2 6 3 7- 2 42 9
Fax : 02) 26 3 7 - 84 29
www. naraevision.co.kr
E-mail : info@naraevision.co.kr
CrystalView DVI Plus
Digital fiber USB Extender
Digital Fiber KVM USB extender
Supports DVI-D video resolutions up to:
1920 x 1200 @ 60Hz (Single-Link DVI)
2560 x 2048 @60Hz (Dual-link DVI)
Extends USB peripherals, keyboard, DVI video, and
mouse signals over multimode fiber up to:
650ft (200m) w/ 62,5/125µ multimode-fiber
1300ft (400m) w/ 50/125µ multimode-fiber
DDC2B compliant
Supports multimode fiber cables
USB 2.0 transparent option (scanners, printers)
Two single link and one dual link model available
Features and Benefits
The CrystalView™ DVI Plus Advantage
Supports DVI-D graphic interfaces in an
uncompressed mode.
Models available
Single Link DVI - single or dual video + USB 2.0
1920 x 1200 resolution
Dual Link DVI - single video + USB 2.0
2560 x 2048 resolution
Supports:
DVI-D video modes
Transparent USB 2.0 (cameras, scanners,
printers, other USB 2.0 compliant devices)
Extend a KVM station from a CPU using
fiber cable up to 1/4 mile
Compatible with all operating systems
Compatible with major KVM switches
Link LED indicators on all units
Easy installation and operation
Rack mount options for mounting
in a 19” rack
The CrystalView DVI Plus is the KVM extender of choice
for businesses that need to extend and operate a
computer, server, or KVM switch from a great distance.
You can fully operate and control a computer or server,
and your USB peripherals from as far away as 1/4 mile
using 50/125 µ multimode fiber. The CrystalView DVI Plus
supports all combinations of DVI-D monitors, video cards,
and USB 2.0 transparent devices.
The extenders support DVI graphical interfaces in an
uncompressed mode. The uncompressed transfer of
DVI data results in a display with no picture corruption
or frame dropping at full speed. Video movements are
smooth even at the highest resolution.
The system consists of two units; a transmitter and a
receiver. The transmitter connects to your CPU’s USB port
and DVI-D monitor connector. The receiver connects to a
USB keyboard, USB mouse, DVI-D video monitor and
USB 2.0 devices (cameras, printers, scanners). The
transmitter and receiver are connected together with fiber
cable. The receiver can be up to 1/4 mile from the
transmitter using 50/125µ Multimode-Fiber.
If your system requires dual video, the CrystalView DVI
Plus dual video model can fully support it.
Fiber makes extended
distances easy to reach
WWW.ROSE.COM
Typical Application
Dual DVI Video model Application
CrystalView DVI Plus basics The CrystalView DVI
Plus system consists of a transmitter that connects to a
PC, or server and a receiver that connects to a USB
keyboard, DVI monitor, and USB mouse. Additional,
USB 2.0 compliant devices such as a USB printer or
camera can be connected to the receiver unit. The
transmitter and receiver units are connected together
with up to 1/4 miles of standard multimode fiber cable.
Models The CrystalView DVI Plus is available in three
different models to meet your system application
requirements. Two single link models and one dual link
model. All models support USB keyboards and mice,
DVI video, and USB 2.0 compliant devices. The dual
video model is available for systems that need to
digitally transmit a second video source.
Installation Installing the CrystalView DVI Plus units
is as easy as connecting the KVM station and USB
devices to the receiver, connecting the computer to the
transmitter, and connecting the transmitter to the
receiver with fiber cable.
Specifications
Dimensions
5.2W x 7.1D x 1.7H (in)
133W x 180D x 43H (mm)
Weight
Operating Temp
2.6 lbs / 1.2 kg (both units)
5˚C – 45˚C / 41˚F – 113˚F
Storage Temp
-25˚C – 60˚C / -13˚F – 140˚F Humidity
80% max, non-condensing
Resolution
1920 x 1200 @ 60 Hz (single Link)
2560 x 2048 @ 60 Hz (Dual Link)
Connectors
Power
Video – DVI-D
Keyboard – USB Type A
Mouse – USB Type A
Fiber – SC fiber
90-240 VAC to 5.0 VDC / app. 10W
Power
Requirements
Local unit: 750 ma max
Remote Unit: 750 ma max
Max distance
650ft (200m) 62,5µm Multimode
1300ft (400m) 50.0µm Multimode
Indicators (LEDs) Power
USB / Video 1 & 2 Diagnostic LEDs
Serial Data:
Baud Rate
Data Flow
Flow control
Audio Data:
Signal level
Impedance
Connectors
Transmission
Microphone
Speakers
Approvals
up to 19,200
Format independent
RTS, CTS, DTR, DSR
5V p-p
47KΩ
3.5mm stereo jack
16 bit, 38.4KHz Digitized audio
Powered or un-powered
Powered
CE
Keyboard and Mouse emulation The CrystalView
DVI Plus uses a microprocessor to emulate the
keyboard and mouse. Only the transmitter unit has to
be connected for the PC to boot properly.
Part Numbers –
Single Link Models
Part Number
CRK-1DFMT1SL
CRK-1DFMT2SL
CRK-1DFMH1SL
CRK-1DFMH2SL
Dual
Dual Link Models
CRK-1DFMT1DL
CRK-1DFMH1DL
/AUD = Audio option
Description
Single Video + USB 2.0
Dual Video + USB 2.0
Single Video + USB HID
Dual Video + USB HID
Single Video + USB 2.0
Single Video + USB HID
Rear View single / dual Link – single Video – USB 2.0
Rear View single Link – dual Video – USB 2.0
서 울 시 영 등 포 구 문 래 동 1가 39 센 터 플 러 스 11 02 호
Tel : 0 2 ) 2 6 3 7- 2 42 9
Fax : 02) 26 3 7 - 84 29
www. naraevision.co.kr
E-mail : info@naraevision.co.kr
ViewLink CATx
MICRO-MINI KVM EXTENDER
ADVANCED KVM EXTENDER
Extend keyboard, video, and mouse up to
1,000' over CATx
Advanced automatic compensation and
equalization
Automated video skew adjustments (Option)
Models available for PS/2, USB, or both
Up to 1920 x 1440 video resolution @ 300’[
Features and Benefits
The ViewLink™ Advantage . . .
Cable length compensation adjustments are automatically
performed
Video equalization and gain can be fine tuned with simple
keyboard commands
Optional automatic skew adjustments produce a crystal
clear display no matter what cable type is used
(recommended for cable lengths over 300’)
Supports:
SVGA, VGA, XGA, RGB video modes
PS/2 or USB keyboards and mice
Automatic Skew Adjustment (optional)
Extend two KVM station up to 1,000 feet away from a CPU
using CATx solid core cable (CAT5, 5e, 6, or 7)
(Skew model is recommended for distances over 300’)
Video resolution up to 1920 x 1440 @ 60Hz
Compatible with Rose Electronics KVM switches
Operating system independent
Supports 35 different country specific operating systems
and keyboards
The ViewLink Micro-Mini CATx KVM extender is the
extender of choice for businesses big and small that
must control a computer from an extended distance.
The ViewLink Micro-Mini CATx allows you to position
a computer up to 1,000 feet away from the KVM
station using common twisted pair CATx cable. Use
any length of data cable up to 1,000 feet, ViewLink
Micro-Mini CATx KVM extender will automatically
calculate the cable length, set the gain and
equalization, and adjust the video skew (option) to
provide a crystal clear image. No jumpers to set or
knobs to adjust.
Remote access to your computers is made
convenient in a variety of situations. You can locate
users away from hazardous industrial environments;
locate computers away from areas vulnerable to theft
of hardware and data, reduce noise and heat, and
increase desk and floor space.
The ViewLink Micro-Mini CATx extender is available in
the following models:
Uses a microprocessor to emulate the keyboard and
mouse. The keyboard and mouse on the remote unit do
not have to be connected for the PC to boot; only the local
unit must be connected to the PC
Made in USA
PS/2 single access
USB single access
PS/2 and USB to PS/2 single access
PS/2 and USB to USB single access
Video only
Options:
Automatic video skew adjustments
WWW.ROSE.COM
Connect the transmitter directly to a PCs
Video, keyboard, and mouse ports
Specifications
Typical Application
Dimensions
Transmitter (in / cm)
Receiver (in / cm)
Transmitter
Width
Depth
Height
1.3 / 33
1.65 / 42 0.63 / 1.6
2.68 /6.8 2.625 / 6.67 1.0 / 2.54
Video:
Up to 1,000' of
CATx Cable
Receiver
Remote and local access using Dual model
ViewLink MicroMicro-Mini CATx KVM extender basics The ViewLink
Micro-Mini CATx system consists of a transmitter unit that connects
to the video, keyboard, and mouse ports on a PC, server, or to a KVM
switch. The receiver unit connects to a keyboard, monitor, and
mouse. The transmitter and receiver units are connected together
with up to 1,000 feet of standard CATx cable.
When you initialize the extender, it automatically senses the cable
distance between the receiver and transmitter units, automatically
adjusts the gain, and sets up everything for you. There are keyboard
commands that allow you to fine tune the video, but they are rarely
needed.
The auto-skew models will automatically adjust the RGB video
components to product a crystal clear display through patch panels
and different cable types.
The ideal environment for the extender is to connect the transmitter
unit to a Rose Electronics KVM switch. Expanding the switch allows
access to 1,000 computers or servers.
Installation Installation is as easy as connecting a KVM station to
the receiver, a transmitter unit to the computer, and connecting the
receiver and transmitter units together with CATx solid core cable.
For proper operation, all equipment should be tied to a common earth
ground.
Models The ViewLink Micro-Mini KVM extender is available in a
Resolution
Up to 1920 x 1440 @ 60Hz @ 300’
1024 x 768 @ 60Hz @ 1,000’
Compatibility
SVGA, VGA, XGA, RGB
Levels
0.7V p-p
Sync type
Separate/composite TTL level
Support:
Keyboards – PC/AT, PS/2,
Video – VGA, SVGA, XGA, RGB
Mouse – PS/2 two button
Microsoft Compatible
Logitech Compatible
Connectors:
PC model
Video – HD15M (Transmitter)
HD15F (Receiver)
Keyboard/Mouse – PS/2
USB model
Video – HD15M (Transmitter)
HD15F (Receiver)
Keyboard/Mouse – USB type A
Video only
Video – HD15
Interconnect
RJ45 - CATx UTP/STP, EIA/TIA 568
(CAT5, 5e, 6, or 7)
Power:
Local – From PC
Remote – External power adapter
100-240 50/60 Hz to +5V 1,0 A
Environmental: Temp. 0°C – 45°C
Humidity 0% – 80% non-condensing
Transmitters
PS/2
USB
PS/2, USB, PS/2 & USB to PS/2, PS/2 & USB to USB, and a Video only
model.
Keyboard and mouse emulation The ViewLink Micro-Mini KVM
extender uses a microprocessor to emulate the keyboard and mouse.
This means that the keyboard and mouse on the receiver unit does
not have to be connected for the PC to boot. Only the transmitter unit
must be connected to the PC.
Part Numbers
Description (Single access models)
VLK-TMVPRAVP
PS/2, VGA KVM Extender
VLK-TMVURAVU
USB, VGA KVM Extender
VLK-TMVBRAVP
PS/2 & USB to PS/2 VGA KVM Extender
VLK-TMVBRAVU
PS/2 & USB to USB VGA KVM Extender
VLK-TMV0RAV0-U
Video only- power from CPU’s USB port
VLK-TMV0RAV0-P
Video only-power from CPU’s PS/2 port
VLK-TMV0RAV0/B1.3
Video only-power from external power adapter
TRF-05D250FSUP-1.3
100-240 50/60Hz VAC to +5V power adapter
ACC-MD6M2MD6F
PS/2 “Y” cable for PS/2 receiver unit
-W suffix = Automatic Skew Adjustment Option
Video only
PS/2 power
Video only
USB power
Video only
Adapter
Power
Receivers
PS/2
USB
Video only
서 울 시 영 등 포 구 문 래 동 1가 39 센 터 플 러 스 11 02 호
Tel : 0 2 ) 2 6 3 7- 2 42 9
Fax : 02) 26 3 7 - 84 29
www. naraevision.co.kr
E-mail : info@naraevision.co.kr