Giving It All We Got . . .
Catalog # 010201
Special OEM Catalog
Coming Through for the Customer
VDO designs, engineers and manufactures instruments,
instrument clusters, electronic information systems, sensors and
control systems for a wide variety of vehicles and equipment.
As a leader in electronic instrumentation, control and sensor
technologies, VDO pioneered innovations such as electronic
speedometers, multi-function displays, sensors and
electronic engine management controls.
VDO provides its customers with a true international resource.
Worldwide, VDO has over 30 manufacturing plants and
employs over 120,000 people. Strength afforded by this global
position also allows VDO to maintain extensive research and
development capabilities around the world. As a vertically
integrated company, VDO is able to provide customers with
complete, cost effective solutions from concept through
production. Around the world, VDO products and
systems enjoy a reputation for accuracy and reliability.
VDO is ready. With ISO 9001 and QS 9000 accreditation,
four production facilities and a Technical Center in
North America, we look froward to helping you meet the
challenges of the increasing competitive worldwide markets.
Over 500 employees work in VDO’s 210,000 sq.ft.
state-of-the-art manufacturing facility in Winchester, VA.
Table of Contents
Cross Reference (Catalog # to Mfr. #)
4
(continued on page 43)
Severe Duty
5
Cockpit International
7
Vision
11
Series 1
15
Industrial
18
DC Hourmeters
21
BAI System
22
D’Mac System
23
E-Gas Electronic Actuator System
24
Windshield Washer System
25
230 Series Heavy-Duty Pressure Switch
26
232 Series Temperature Switches
27
Pressure Senders
28
Temperature Senders
30
Fuel Level Senders
32
Speedometer & Tachometer Senders
33
Gauge Accessories
34
Light Bulbs and Sockets
37
Technical Specifications and Dimensions
39
VDO Limited Warranty
VDO North America warrants all merchandise against defect in factory workmanship and materials for
a period of 24 months after purchase. This warranty applies to the first retail purchaser and covers only
those products exposed to normal use or service. Provisions of this warranty shall not apply to a VDO
product used for a purpose for which it was not designed, or which has been altered in any way that
would be detrimental to the performance or life of the product, or misapplication, misuse, negligence
or accident. On any part or product found to be defective after examination by VDO North America,
VDO North America will only repair or replace the merchandise through the original selling dealer or
on a direct basis. VDO North America assumes no responsibility for diagnosis, removal and/or installation
labor, loss of vehicle use, loss of time, inconvenience or any other consequential expenses. The warranties
herein are in lieu of any other expressed or implied warranties, including any implied warranty of
merchantability or fitness, and any other obligation on the part of VDO North America, or selling dealer.
Note: This is a “Limited Warranty” as defined by the Magnuson-Moss Warranty Act of 1975.
Cross Reference (Catalog # to Mfr. #)
CAT. #
02 012 126
02 012 150
02 012 426
02 012 430
02 124 126
02 124 166
02 124 168
02 124 526
02 124 566
02 124 568
02 222 106
02 222 112
02 222 306
02 222 312
02 222 512
02 222 712
02 230 712
02 230 812
02 321 628
02 321 728
02 400 310
02 410 806
02 410 906
02 420 712
03 200 514
03 230 702
03 270 612
05 800 762
05 800 764
120 302
128 501B
150 103
150 105
150 106
150 361
150 330
150 307
150 301
150 509
151 002
180 505
180 504
180 301
180 302
180 310
180 315
180 503
180 501
333 051
333 151
333 055
333 353
333 355
333 952
333 953
333 152
333 155
333 363
333 962
333 963
333 561
333 563
333 562
333 564
333 162
333 163
333 164
437 152
437 153
437 050
437 954
437 950
MFR. #
PAGE
02 012 126
5
02 012 150
5
02 012 426
5
02 012 430
5
02 124 126
6
02 124 166
6
02 124 168
6
02 124 526
6
02 124 566
6
02 124 568
6
02 222 106
6
02 222 112
6
02 222 306
6
02 222 312
6
02 222 512
6
02 222 712
6
02 230 712
6
02 230 812
6
02 321 628
5
02 321 728
5
02 400 310
6
02 410 806
6
02 410 906
6
02 420 712
6
03 211 412
6
03 230 702
6
03 270 612
6
05 800 762
6
05 800 764
6
1 111 020 020D
15
1 116 015 023C
19
1 121 002 094D
13
1 121 003 222D
13
1 121 003 246D
13
1 121 020 027D
16
1 121 020 278D
16
1 121 020 285D
16
1 121 020 292D
17
1 121 150 007DM 19
1 122 001 032D
9
1 131 015 039D
19
1 131 015 053D
19
1 131 020 385D
16
1 131 020 392D
16
1 131 020 402D
16
1 131 020 419D
16
1 131 020 426D
19
1 131 150 004D
19
1 211 001 927D
7
1 211 001 965D
12
1 211 001 972D
7
1 211 001 996D
15
1 211 002 234D
15
1 211 002 241D
8
1 211 002 258D
8
1 211 002 306D
12
1 211 002 337D
12
1 211 002 368D
15
1 211 002 382D
7
1 211 002 399D
7
1 211 002 416D
18
1 211 002 423D
18
1 211 002 447D
18
1 211 002 454D
18
1 211 002 478D
11
1 211 002 485D
11
1 211 002 492D
11
1 211 012 341D
11
1 211 012 358D
11
1 211 012 365D
7
1 211 012 406D
7
1 211 012 413D
7
CAT. #
437 956
333 515
333 531
333 532
333 533
333 534
333 536
333 535
437 354
350 505
350 506
350 510B
350 511
350 512
350 513
350 515
350 516
350 508
350 507
350 519
350 520
350 111
350 112
310 033B
310 501
310 502
310 514
310 511
310 512
310 303
310 305
310 953
310 153
310 901
190 514
190 502
190 301
190 501
190 953
190 966
332 501
332 502
332 503
332 504
301 501
301 502
301 505
301 506
301 510
301 509
370 501
370 502
370 301
340 002
340 001
340 011
340 014
340 013
340 012
340 020
360 001
360 002
360 003
360 004
360 005
360 015
360 016
360 021
360 027
360 080
360 081
360 406
MFR. #
PG.
1 211 012 530D
7
1 211 015 399D
18
1 211 015 825D
18
1 211 015 832D
18
1 211 015 904D
18
1 211 015 911D
18
1 211 015 942D
18
1 211 015 959D
18
1 211 020 119D
15
1 221 015 035D
19
1 221 015 042D
19
1 221 015 121C
19
1 221 015 138D
19
1 221 015 145D
19
1 221 015 152D
19
1 221 015 217D
19
1 221 015 224D
19
1 221 015 255D
19
1 221 015 262D
19
1 221 015 468D
19
1 221 015 475D
19
1 225 001 636D
13
1 225 001 643D
13
1 231 003 026C
8
1 231 015 104D
19
1 231 015 111D
19
1 231 015 135D
19
1 231 015 142D
19
1 231 015 159D
19
1 231 020 027D
16
1 231 020 319D
16
1 231 900 312D
8
1 231 900 329D
12
1 232 901 022D
8
1 241 015 156D
20
1 241 015 280DM 20
1 241 020 141D
17
1 241 150 004D
20
1 241 900 120D
20
1 241 900 247D
10
1 242 015 016D
20
1 242 015 023D
20
1 242 015 030D
20
1 242 015 047D
20
1 251 015 012D
19
1 251 015 029D
19
1 251 015 050D
19
1 251 015 067D
19
1 251 015 108D
19
1 251 015 115D
19
1 261 015 019D
20
1 261 015 026D
20
1 261 020 011D
17
1 511 001 043D
33
1 511 001 108D
33
1 511 010 056D
33
1 511 010 063D
33
1 511 010 070D
33
1 511 010 087D
33
1 515 001 047D
33
1 521 001 019D
28
1 521 001 026D
28
1 521 001 033D
28
1 521 001 040D
29
1 521 001 057D
28
1 521 001 064D
29
1 521 001 071D
29
1 521 001 088D
29
1 521 001 095D
28
1 521 001 181D
28
1 521 001 198D
29
1 521 001 576D
29
CAT. #
360 811
360 023
360 006
360 033
360 007
360 024
360 028
360 019
360 034
360 410
360 430
360 441B
360 043
360 431
360 432
360 442
230 404
230 415
230 460
230 504
230 515
230 560
230 604
230 615
230 660
360 009
360 025
360 905
362 001
362 002
362 003
362 007
362 033
362 034
362 035
362 004
323 088
323 487
323 098
323 100
323 028
323 026
323 099
323 097
323 120
323 705
323 701
323 416
323 417
323 418
323 419
323 420
323 421
323 422
323 423
323 055
323 056
323 057
323 058
323 059
323 060
323 061
323 064
323 066
323 093
323 094
323 090
323 091
323 092
323 050
323 086
323 095
MFR. #
PAGE
1 521 001 734D
29
1 521 002 010D
29
1 521 002 034D
28
1 521 002 106D
29
1 521 002 120D
28
1 521 002 168D
29
1 521 002 182D
28
1 521 002 254D
28
1 521 002 371D
28
1 521 003 011D
28
1 521 003 066D
29
1 521 003 097B
28
1 521 003 121D
29
1 521 003 145D
29
1 521 003 152D
29
1 521 003 169D
29
1 521 006 069D
26
1 521 006 083D
26
1 521 006 090D
26
1 521 006 100D
26
1 521 006 117D
26
1 521 006 124D
26
1 521 006 148D
26
1 521 006 155D
26
1 521 006 162D
26
1 523 001 011D
28
1 523 001 028D
29
1 524 900 094D
29
1 525 001 013D
28
1 525 001 020D
29
1 525 001 037D
29
1 525 001 044D
29
1 525 001 068D
28
1 525 001 075D
29
1 525 001 082D
29
1 525 001 109D
29
1 531 003 032D
30
1 531 004 167D
30
1 531 004 208D
30
1 531 004 260D
30
1 531 004 277D
30
1 531 004 284D
30
1 531 004 291D
30
1 531 004 363D
30
1 531 004 370D
31
1 531 005 010D
8
1 531 005 034D
8
1 531 006 028D
30
1 531 006 035D
30
1 531 006 042D
30
1 531 006 059D
30
1 531 006 066D
30
1 531 006 073D
30
1 531 006 080D
30
1 531 006 097D
31
1 531 006 114D
31
1 531 006 121D
31
1 531 006 138D
31
1 531 006 145D
31
1 531 006 152D
31
1 531 006 169D
31
1 531 006 176D
31
1 531 006 183D
31
1 531 006 190D
31
1 531 006 248D
30
1 531 006 262D
30
1 531 006 499D
31
1 531 006 509D
31
1 531 006 516D
31
1 531 006 657D
31
1 531 006 695D
31
1 531 006 860D
30
CAT. #
323 892
323 425
323 431
323 477
323 478
323 479
323 483
323 485
325 001
325 002
325 003
325 008
325 007
224 004
224 003
224 051
224 054
224 055
224 058
224 061
224 062
224 063
224 065
224 066
224 067
224 069
224 049
226 001
226 007
226 008
331 523
331 020
331 512
331 511
331 534
331 501
331 502
331 503
331 504
331 514
331 517B
600 401
600 402
240 100
240 101
240 017
240 016
240 019
240 018
391 003
391 007
391 009
391 009
150 754
240 902
150 851
150 855
240 041
240 043
150 856
240 023
240 026
110 860
110 861
110 862
600 885
240 802
240 803
240 804
391 704
391 702
391 101
MFR. #
PAGE
1 531 007 177D 8, 12
1 531 009 014D
30
1 531 009 038D
31
1 531 009 045D
30
1 531 009 052D
30
1 531 009 069D
30
1 531 009 076D
30
1 531 009 083D
31
1 535 001 010D
30
1 535 001 027D
30
1 535 001 034D
30
1 535 001 065D
30
1 535 001 089D
30
1 551 003 012D
32
1 551 003 029D
32
1 551 003 342D
32
1 551 003 579D
32
1 551 003 586D
32
1 551 003 610D
32
1 551 003 641D
32
1 551 003 658D
32
1 551 003 665D
32
1 551 003 689D
32
1 551 003 696D
32
1 551 003 706D
32
1 551 003 720D
32
1 551 003 902D
32
1 551 004 082D
32
1 551 004 123D
32
1 551 004 161D
32
1 763 001 149D
21
1 763 002 016D
21
1 763 002 126D
21
1 763 002 133D
21
1 763 003 213D
21
1 763 015 016D
21
1 763 015 023D
21
1 763 015 030D
21
1 763 015 047D
21
1 763 015 119D
21
1 763 015 126C
21
1 882 901 159D
36
1 882 901 166D
36
1 886 900 066D
35
1 886 900 080D
35
1 886 900 183D
34
1 886 900 190D
34
1 886 900 224D
34
1 886 900 231D
34
1 888 001 024D
20
1 888 001 079D
14
1 888 001 093D
10
1 888 001 093D
20
1 893 900 022D
34
1 893 900 039D
34
1 893 900 060D
34
1 893 900 077D
34
1 893 900 163D
34
1 893 900 170D
34
1 893 900 280D
34
1 895 001 035D
34
1 895 001 107D
36
1 897 001 013D
35
1 897 001 020D
35
1 897 001 037D
35
1 897 001 123D
35
1 897 002 014D
34
1 897 002 021D
34
1 897 002 038D
34
1 899 900 011D
36
1 899 900 028D
36
1 899 900 114D
36
Continued on page 43.
4
Severe Duty
When an extreme working environment calls
for a tough gauge, Severe Duty will get the job
done. Specially designed for industrial applications,
these instruments feature legendary VDO quality
by incorporating our patented air core and stepper
motor movements.
For additional protection against the elements,
we incorporated corrosion proof materials, silver
contact connectors and special seals with dual
lenses. The dual lens system is made up of
contoured impact-proof plastic that not only
prevents gauge fogging, but also minimizes
reflections, making the instrument readable
in almost any condition.
For versatility, Severe Duty instruments also
feature built-in warning lights and are available
in 12/24-volt applications. As a finishing touch,
we incorporated our unique Spin-Lok™ mounting
system for fast, positive instrument mounting.
Instruments can also be adapted to a square
bezel gauge by using an accessory kit.
PROGRAMMABLE TACHOMETERS w/LCD hourmeter
For use with all current electronic control unit (DDEC, etc.), inductive, alternator, standard ignition,
electronic ignition and hall-effect applications. Engine hours are displayed in the LCD window.
Description
3,000 RPM w/EHM
4,000 RPM w/EHM
Size
Dwg.
Terminal
Voltage
Part No.
33/8" (85 mm) dia.
33/8" (85 mm) dia.
–
–
Spade
Spade
12/24
12/24
02 012 126
02 012 150
For 24V applications, use bulb #600 829 (2x).
PROGRAMMABLE TACHOMETERS w/o hourmeter
For use with alternator.
Description
3,000 RPM w/o EHM
4,000 PRM w/o EHM
Size
Dwg.
Terminal
Voltage
Part No.
(85 mm) dia.
33/8" (85 mm) dia.
–
–
Spade
Spade
12
12
02 012 426
02 012 430
33/8"
For 24V applications, use bulb #600 829 (2x) and resistor kit 391 031.
TEMPERATURE GAUGE,
Description
250˚F / 120°C
250˚F / 120°C
Electrical, 21/16” (52 mm) dia.
Ω Range
On Dial
Terminal
Sender Table
Voltage
Part No.
VDO
VDO
”Water“
”Water“
Spade
Spade
A
A
24
12
02 321 728
02 321 628
See page 32 for sender tables.
5
Severe Duty cont.
PRESSURE GAUGES,
Description
Electrical, 21/16” (52 mm) dia.
Ω Range
On Dial
Terminal
Sender Table
Voltage
VDO
VDO
VDO
VDO
VDO
VDO
Oil symbol
Oil symbol
Oil symbol
Oil symbol
Trans. symbol
Trans. symbol
Spade
Spade
Spade
Spade
Spade
Spade
1
1
5
5
7
7
12
24
12
24
12
24
Terminal
Sender Table
Voltage
Spade
Spade
Spade
Spade
Spade
Spade
Spade
Spade
12
12
11
11
14
14
15
15
12
24
12
24
12
24
12
24
80 PSI
80 PSI
150 PSI
150 PSI
400 PSI
400 PSI
Part No.
02
02
02
02
02
02
124
124
124
124
124
124
126
526
166
566
168
568
See pages 28 & 29 for sender tables.
FLUID LEVEL GAUGES,
Electrical, 21/16” (52 mm) dia.
Ω Range
Description
Fuel gauge
Fuel gauge
Fuel gauge
Fuel gauge
Fuel, adjustable
Fuel, adjustable
Water gauge
Water gauge
240 –33
240 –33
VDO
VDO
tube type (90 – 0 Ohms)
tube type (90 – 0 Ohms)
VDO
VDO
Part No.
02
02
02
02
02
02
02
02
222
222
222
222
222
222
230
230
306
106
112
312
512
712
712
812
See page 32 for sender tables.
VOLTMETERS,
Description
12V
24V
21/16” (52 mm) dia.
Range
On Dial
Terminal
Voltage
Part No.
8 –16V
16 –32V
”Symbol“
”Symbol“
Spade
Spade
12
24
02 410 806
02 410 906
AMMETERS (Shunted), 21/16” (52 mm) dia.
Description
Range
On Dial
Terminal
Voltage
Part No.
”Amp“
Spade
12
02 420 712
”Amp“
–
Spade
–
12
12
02 400 310
03 320 116
Terminal
Voltage
Part No.
Spade
12
03 200 514
Range
Terminal
Voltage
Part No.
9–28V
Spade
12/24
03 270 612
80 Amp gauge, -80/0/+80
illuminated
Kit
-80/0/+80
Shunt only
–
For 24V applications, use resistor kit #391 101.
ANGLE INDICATOR GAUGE,
Description
21/16” (52 mm) dia.
Range
Position indicator VDO
CLOCK,
21/16" (52 mm) dia.
Description
Analog
ACOUSTICAL WARNING ALARM,
2 1/16" (52 mm) dia.
Description
Terminal
Voltage
Part No.
Buzzer (Piezo)
Spade
12/24
03 230 702
Terminal
Voltage
Part No.
12
24
05 800 762
05 800 764
WARNING LIGHTS
Description
For volt, temp, pressure and fuel
For volt, temp, pressure and fuel
6
Spade
(.125")
1/8"
Cockpit International
These world-class instruments are designed to
be the standard in the industry at an economical
price. All instruments feature VDO’s latest
generation patented air core and steeper motor
movements for the reliability and durability you’ve
come to expect from a leader in instrumentation.
These instruments are made for durability with
a choice of two terminals: M4 studs and .250"
male spade. All 52 mm instruments feature zincplated metal housing and black painted, brass
bezels for rugged, reliable service.
Each instrument in this product line incorporates
standard flood-lit illumination and is available in
12/24-volt applications.
PROGRAMMABLE SPEEDOMETERS w/resettable LCD tripodometer
Feature a unique auto-calibration function for easy adjustment through the LCD display. Odometer
and trip odometer are clearly displayed in the LCD window.
For use with hall-effect, inductive, OEM electronic output and generator senders.
Description
120 MPH
45 MPH / 75 KMH
130 KMH / 85 MPH
120 MPH / 200 KMH
120 MPH
160 MPH
Size
31/8"
33/8"
33/8"
33/8"
33/8"
33/8"
(80
(85
(85
(85
(85
(85
mm)
mm)
mm)
mm)
mm)
mm)
dia.
dia.
dia.
dia.
dia.
dia.
Dwg.
Terminal
Voltage
A
A
A
A
A
A
Spade
Spade
Spade
Spade
Spade
Spade
12
12
12
12
12
12
Part No.
437
437
437
437
437
437
050
950
956
954
052
053
For 24V applications, use bulb #600 826 (2x).
PROGRAMMABLE TACHOMETERS w/LCD hourmeter
For use with all current electronic control unit (DDEC, etc.), inductive, alternator, standard ignition,
electronic ignition and hall-effect applications. Engine hours are displayed in the LCD window.
Description
7,000
3,000
4,000
7,000
RPM
RPM
RPM
RPM
Size
Dwg.
Terminal
Voltage
(80 mm) dia.
33/8" (85 mm) dia.
33/8" (85 mm) dia.
33/8" (85 mm) dia.
–
B
B
–
Spade
Spade
Spade
Spade
12
12
12
12
31/8"
Part No.
333
333
333
333
051
962
963
055
For 24V applications, use bulb #600 826 (2x).
For technical specifications and dimensions, see pages 38 – 42.
7
Cockpit International cont.
PROGRAMMABLE TACHOMETERS w/o hourmeter
For use with alternator, 4/6/8 cylinder ignition and 12V square wave applications.
Description
4,000
6,000
8,000
3,000
4,000
Size
Dwg.
Terminal
Voltage
(52 mm) dia.
21/16" (52 mm) dia.
21/16" (52 mm) dia.
33/8" (85 mm) dia.
33/8" (85 mm) dia.
D
D
D
C
C
Spade
Spade
Spade
Spade
Spade
12
12
12
12
12
21/16"
RPM
RPM
RPM
RPM
RPM
Part No.
333
333
333
333
333
965
958
959
952
953
For 24V applications, use resistor kit #391 101, 2 1/16".
For 24V applications, use resistor kit #391 103, 3 3/8".
TEMPERATURE GAUGES,
Description
240˚F
250˚F
250˚F
250˚F
280˚F
300˚F
300˚F
250˚F
300˚F
300˚F
600˚F
/ 110˚C
/ 120˚C
/ 120˚C
/ 140˚C
/ 150˚C
/ 120˚C
/ 150˚C
/ 150˚C
Electrical, 21/16" (52 mm) dia.
Ω Range
On Dial
Dwg.
Terminal
Sender Table
Voltage
U.S.
VDO
VDO
VDO
U.S.
VDO
VDO
VDO
VDO
VDO
VDO
Water symbol
Water symbol
“Water”
Water symbol
Water symbol
Oil symbol
“Oil”
Water symbol
”Oil”
Oil symbol
Cyl. head temp
G
G
E
G
G
G
E
G
G
G
G
Stud
Stud
Spade
Spade
Stud
Stud
Spade
Stud
Spade
Stud
Spade
–
A
A
A
–
B
B
A
B
B
–
12
12
12
12
12
12
12
24
12
24
12
Fitting Size
Voltage
Part No.
310
310
310
310
310
310
310
310
310
310
310
907
909
039
934B
911
915
012
910
936B
916
033B
See page 30 & 31 for sender tables.
Mechanical, 21/16" (52 mm) dia.
Description
Length
265°F/130°C
265°F/130°C
265°F/130°C
72" cap.
96" cap.
144" cap.
Dwg.
H
H
H
1/2 –14
NPT
NPT
1/2 –14 NPT
1/2 –14
12
12
12
Part No.
180 901
180 902
180 903
For 24V applications, use bulb #600 826.
Adapters
Description
1/2 – 14
3/8 –18
Part No.
NPT
NPT
180 066
180 067
Cylinder Head Temperature, 21/16" (52 mm) dia.
Description
Dwg.
600°F, complete kit
14 mm dia. thermal sender (included in kit)
12 mm dia. thermal sender
P
–
–
Voltage
12
–
–
Part No.
310 901
323 701
323 705
For 24V applications, use bulb #600 807.
PYROMETERS,
250˚ – 1650˚F, 21/16" (52 mm) dia.
Description
12' kit
Gauge only
Pyrometer sender only
30' extension
For 24V applications, use resistor kit #391 101.
8
Dwg.
O
O
O
–
Voltage
12
12
–
–
Part No.
310
310
323
240
953
951
892
092
Cockpit International cont.
PRESSURE GAUGES,
Description
80 PSI / 5 bar
80 PSI
80 PSI
150 PSI / 10 bar
150 PSI
400 PSI
80 PSI / 5 bar
150 PSI / 10 bar
Electrical, 21/16" (52 mm) dia.
Ω Range
On Dial
Dwg.
Terminal
Sender Table
Voltage
VDO
VDO
VDO
VDO
VDO
VDO
VDO
VDO
Oil symbol
”Oil“
”Oil“
Oil symbol
Air symbol
Trans. symbol
Oil symbol
Oil symbol
G
E
E
G
E
G
G
G
Stud
Spade
Spade
Stud
Spade
Stud
Stud
Stud
1
1
1
5
5
7
1
5
12
12
12
12
12
12
24
24
Fitting Size
Voltage
Part No.
350
350
350
350
350
350
350
350
901
040
934B
909
041
913
902
910
See pages 28 & 29 for sender tables.
Mechanical, 21/16" (52 mm) dia.
Description
15 PSI
30 PSI
100 PSI
150 PSI / 10 bar
150 PSI / 10 bar
400 PSI / 25 bar
On Dial
Dwg.
”Boost“
”Boost“
”Oil“
Oil symbol
Air symbol
Oil symbol
I
I
I
I
I
I
1/8 –27
1/8 –27
1/8 –27
1/8 –27
1/8 –27
1/8 –27
NPT
NPT
NPT
NPT
NPT
NPT
12
12
12
12
12
12
Part No.
150
150
150
150
150
150
051
052
030
904
905
906
For 24V applications, use bulb #600 826.
DUAL AIR PRESSURE GAUGE,
Description
On Dial
Red / Green pointer
”Air“
Mechanical, 31/8" (80 mm) dia.
Dwg.
Fitting Size
1/8 –27
I
NPT
Voltage
24
Part No.
151 002
For 12V applications, use bulb #600 803 (2x).
VACUUM,
21/16" (52 mm) dia.
Description
30" Hg. / 1 bar
On Dial
Dwg.
”Vacuum“
I
Fitting Size
1/8 –27
NPT
Voltage
12
Part No.
150 042
For 24V applications, use bulb #600 826.
Tubing kit not included, see page 34.
TURBO BOOST,
21/16" (52 mm) dia.
Description
Dwg.
30" Hg. / 20 PSI
Fitting Size
I
1/8 –27
NPT
Voltage
12
Part No.
150 921
For 24V applications, use bulb #600 826.
Tubing kit not included, see page 34.
FUEL LEVEL GAUGES,
Electrical, 21/16" (52 mm) dia.
Ω Range
On Dial
Dwg.
Terminal
Sender Table
Voltage
For VDO sender 10 – 180
For VDO sender 10 – 180
For U.S. sender 240 – 33
For GM sender,
0 – 90
(from 1965)
For O.E.M. sender 0 – 90
For O.E.M. sender 0 – 90
For VDO sender 10 – 180
For U.S. sender 240 – 33
”Fuel“
symbol
”Fuel“
”Tank“
E
G
G
E
Spade
Stud
Stud
Spade
11
11
12
13
12
12
12
12
301
301
301
301
015
901
903
030
”LP“
symbol
symbol
symbol
–
–
G
G
Spade
Spade
Stud
Stud
N/A
13
11
12
12
12
24
24
301
301
301
301
036
930B
902
904
Description
Part No.
See page 32 for sender tables.
For technical specifications and dimensions, see pages 38 – 42.
9
Cockpit International cont.
VOLTMETERS,
Description
Electrical, 21/16" (52 mm) dia., w/ISO symbol
Range
12V
8 –16V
12V
8 –16V
12V, w/colorband 8 –16V
24V
18 – 32V
AMMETERS (Non-shunted),
Description
30 Amp
60 Amp
Dwg.
Terminal
Voltage
Part No.
G
G
E
G
Stud
Spade
Spade
Stud
12
12
12
24
332 901
332 932B
332 041
332 902
21/16" (52 mm) dia.
Range
On Dial
Dwg.
Terminal
Voltage
Part No.
30/0/30
60/0/60
”Amp“
”Amp“
L
L
Stud
Stud
12
12
190 903
190 904
For 24V applications, use bulb #600 826.
AMMETER (Shunted),
Description
300 Amp kit
21/16” (52 mm) dia., complete kit w/shunt
Range
On Dial
Dwg.
Terminal
Voltage
Part No.
300/0/300
”Amp“
M
Spade
12
190 966
For 24V applications, use resistor #391 101.
Accessories
Description
Part No.
300 Amp, shunt only
CLOCK,
Description
Analog
21/16" (52 mm) dia.
Range
Dwg.
Terminal
Voltage
Part No.
9 – 28V
J
Spade
12/24
370 951
For 24V applications, use bulb #600 807.
10
391 009
Vision
VDO Vision represents a true technological
advancement in instrument illumination. Using
light piping techniques, we have created fullybacklit ”through dial lighting“ and pointer
illumination with an unmatched level of
nighttime readability.
Vision instruments also feature our innovative
Spin-Lok™ mounting system for fast and easy
installation. Using our unique spin-on clamp, it
provides a full 360 degrees of mounting force
when installed, preventing panel warping and
gauge rotation.
As with all VDO instruments, Vision
incorporates the use of our own patented
air core or stepper motor movements. Designed
and used worldwide exclusively by VDO.
PROGRAMMABLE SPEEDOMETERS w/resettable LCD tripodometer
Vision speedometers feature a unique auto-calibration function, allowing for easy adjustment
through the LCD display. Odometer and tripodometer are clearly displayed in the LCD window,
and the operator may toggle between these modes with the push of a button.
For use with hall-effect, inductive, OEM electronic output and generator senders.
Description
85 MPH / 130 KMH
120 MPH
120 MPH
Size
Dwg.
33/8" (85 mm) dia. A
33/8" (85 mm) dia. A
4" (100 mm) dia. A
Terminal
Voltage
Part No.
Spade
Spade
Spade
12/24
12/24
12/24
437 152
437 153
437 155
For 24V applications, use bulb #600 826 (2x).
PROGRAMMABLE TACHOMETERS w/LCD hourmeter
For use with all current electronic control units (DDEC, etc.), inductive, alternator, standard ignition,
electronic ignition and hall-effect applications. Engine hours are displayed in the LCD window.
Description
3,000 RPM
4,000 RPM
6,000 RPM
Size
Dwg.
33/8"
(85 mm) dia. B
33/8" (85 mm) dia. B
33/8" (85 mm) dia. B
Terminal
Voltage
Part No.
Spade
Spade
Spade
12/24
12/24
12/24
333 162
333 163
333 164
For 24V applications, use bulb #600 826 (2x).
Trioptic™
technology for
superior illumination.
For technical specifications and dimensions, see pages 38 – 42.
VDO’s Spin-Lok™
mounting system
secures the instrument
with 360˚ of force.
11
Vision cont.
PROGRAMMABLE TACHOMETERS w/o hourmeter
For use with alternator, 4/6/8 cylinder ignition and 12V square wave applications.
Description
4,000
6,000
8,000
7,000
3,000
7,000
8,000
Size
Dwg.
Terminal
Voltage
(52 mm) dia.
21/16" (52 mm) dia.
21/16" (52 mm) dia.
31/8" (80 mm) dia.
33/8" (85 mm) dia.
33/8" (85 mm) dia.
4" (100 mm) dia.
D
D
D
C
C
C
C
Spade
Spade
Spade
Spade
Spade
Spade
Spade
12/24
12/24
12/24
12/24
12/24
12/24
12/24
21/16"
RPM
RPM
RPM
RPM
RPM
RPM
RPM
Part No.
333
333
333
333
333
333
333
156
158
159
151
152
155
160
For 24V applications, use resistor kit #391 101, 2 1/16".
For 24V applications, use resistor kit #391 103, 3 1/8", 3 3/8" and 4".
TEMPERATURE GAUGES,
Description
250˚F
300˚F
400˚F
Electrical, 21/16" (52 mm) dia.
Ω Range
On Dial
Dwg.
Terminal
Sender Table
Voltage
Part No.
VDO
VDO
VDO
”Water“
”Oil“
”Trans“
E
E
E
Spade
Spade
Spade
A
B
C
12
12
12
310 105
310 106
310 107
Fitting Size
Voltage
Part No.
12
180 101
For 24V applications, use bulb #600 826.
See pages 30 & 31 for sender tables.
Mechanical, 21/16" (52 mm) dia.
Description
110°F/265°C
Length
On Dial
72" cap.
”Water“
Dwg.
1/2 –14
H
NPT
For 24V applications, use bulb #600 826.
Adapters
Description
1/2 – 14
3/8 –18
Part No.
NPT
NPT
180 066
180 067
OUTSIDE TEMPERATURE GAUGE,
Description
Complete kit, Fahrenheit
Electrical, 21/16" (52 mm) dia.
On Dial
Dwg.
Voltage
Part No.
-10˚F – 120˚F
N
12
397 154
Dwg.
Voltage
Part No.
O
O
O
–
12
12
–
–
For 24V applications, use resistor kit #391 101.
PYROMETERS,
Electrical, 21/16" (52 mm) dia., 250˚F – 1650˚F
Description
12' Kit
Gauge only
Pyrometer sender only
30' extension
For 24V applications, use resistor kit #391 101.
12
310
310
323
240
153
151
892
092
Vision cont.
PRESSURE GAUGES,
Electrical, 21/16" (52 mm) dia.
Description
Ω Range
On Dial
Dwg.
Terminal
Sender Table
Voltage
80 PSI
80 PSI
100 PSI
100 PSI
150 PSI
150 PSI
150 PSI
150 PSI
400 PSI
10 – 180
240 – 33
10 – 180
240 – 33
10 – 180
240 – 33
10 – 180
10 – 180
10 – 180
”Oil“
”Oil“
”Oil“
”Oil“
”Oil“
”Oil“
”Front Air“
”Rear Air“
”Trans“
E
E
E
E
E
E
E
E
E
Spade
Spade
Spade
Spade
Spade
Spade
Spade
Spade
Spade
1
2
3
4
5
–
5
5
7
12
12
12
12
12
12
12
12
12
Fitting Size
Voltage
Part No.
350
350
350
350
350
350
350
350
350
104
105
106
107
108
109
111
112
110
For 24V applications, use bulb #600 826.
See pages 28 & 29 for sender tables.
PRESSURE GAUGES,
Mechanical, 21/16" (52 mm) dia.
Description
15 PSI
30 PSI
30 PSI
100 PSI
150 PSI
150 PSI
150 PSI
150 PSI
On Dial
Dwg.
”Boost“
”PSI“
”Boost“
”Oil“
”Front Air“
”Rear Air“
”Oil“
”Air“
I
I
I
I
I
I
I
I
1/8 –27
1/8 –27
1/8 –27
1/8 –27
1/8 –27
1/8 –27
1/8 –27
1/8 –27
NPT
NPT
NPT
NPT
NPT
NPT
NPT
NPT
12
12
12
12
12
12
12
12
Part No.
150
150
150
150
150
150
150
150
101
103
104
107
105
106
111
112
For 24V applications, use bulb #600 826.
Tubing kit not included, see page 34.
FUEL GAUGES,
Description
Electrical, 21/16" (52 mm) dia.
Ω Range
For VDO sender 10 –180
For U.S. sender 240 – 33
For GM sender
0 – 90
Adjustable,
90 – 0
for tube type sender only
On Dial
Fuel
Fuel
Fuel
Fuel
symbol
symbol
symbol
symbol
Dwg.
Terminal
Sender Table
Voltage
Part No.
E
E
E
E
Spade
Spade
Spade
Spade
11
12
13
14
12
12
12
12
Fitting Size
Voltage
Part No.
12
150 121
Voltage
Part No.
12
150 131
301
301
301
301
104
105
106
107
See page 32 for sender tables.
TURBO BOOST,
Mechanical, 21/16" (52 mm) dia.
Description
0 – 30 in. Hg. to 0 – 25 PSI
On Dial
Dwg.
”Turbo“
I
1/8 –27
NPT
For 24V applications, use bulb #600 826.
Tubing kit not included, see page 34.
VACUUM GAUGE,
Mechanical, 21/16" (52 mm) dia.
Description
0 – 30 in. Hg.
On Dial
”Vacuum“
Dwg.
I
Fitting Size
1/8 –27
NPT
For 24V applications, use bulb #600 826.
Tubing kit not included, see page 34.
For technical specifications and dimensions, see pages 38 – 42.
13
Vision cont.
VOLTMETER, 21/16" (52 mm) dia.
Description
On Dial
Dwg.
Terminal
Voltage
Part No.
8 –16V
”Volt“
E
Spade
12
332 103
AMMETERS (Non-Shunted),
Description
60 Amp
100 Amp
Electrical, 21/16" (52 mm) dia.
Range
On Dial
Dwg.
Terminal
Voltage
Part No.
60/0/60
100/0/100
”Amp“
”Amp“
L
L
Stud
Stud
12
12
190 104
190 105
For 24V applications, use bulb #600 826.
AMMETERS (Shunted),
Description
Range
Electrical, 21/16" (52 mm) dia.
On Dial
Dwg.
Terminal
Voltage
Part No.
”Amp“
M
Spade
12
190 151B
–
–
–
–
391 007
Range
Dwg.
Terminal
Voltage
Part No.
9 – 28V
J
Spade
12/24
370 152
150 Amp,
150/0/150
gauge only
150 Amp, shunt only
For 24V applications, use resistor #kit 391 101.
CLOCK,
Description
Analog
Electrical, 21/16" (52 mm) dia.
For 24V applications, use bulb #600 826.
14
Series 1
VDO Series 1 instruments feature standard
scales with step-type, chrome-plated brass bezels.
Series 1 instruments utilize edge-lit dials and
feature easy-to-read white numerals and pointers
on black faces. All housings are constructed of
zinc-plated steel and have U-bracket mounting
and stud-type connections except where noted in
the technical specifications and dimensions section
of this catalog.
PROGRAMMABLE SPEEDOMETERS w/resettable LCD tripodometer
Series 1 speedometers feature a unique auto-calibration function, allowing for easy adjustment
through the LCD display. Odometer and tripodometer readings are clearly displayed in the LCD
window, and the operator may toggle between these modes with the push of a button.
For use with hall-effect, inductive, OEM electronic output and generator senders.
Description
120 MPH
160 MPH
Size
Dwg.
33/8"
(85 mm) dia. A
33/8" (85 mm) dia. A
Terminal
Voltage
Part No.
Spade
Spade
12/24
12/24
437 353
437 354
For 24V applications, use bulb #600 826 (2x).
MECHANICAL SPEEDOMETER w/o tripodometer,
Description
120 MPH / 200 KMH
Size
Dwg.
33/8" (85 mm) dia. –
5/8 –18
thread, 1.0 ratio
Terminal
Voltage
Part No.
–
12
120 302
PROGRAMMABLE TACHOMETER w/LCD hourmeter
For use with all current electronic control unit (DDEC, etc.), inductive, alternator, standard ignition,
electronic ignition and hall-effect applications. Engine hours are displayed in the LCD window.
Description
4,000 RPM
Size
33/8"
Dwg.
(85 mm) dia. B
Terminal
Voltage
Part No.
Spade
12/24
333 363
Terminal
Voltage
Part No.
Spade
Spade
12
12
333 353
333 355
For 24V applications, use bulb #600 826 (2x).
PROGRAMMABLE TACHOMETERS w/o hourmeter
For use with alternator, 4/6/8 cylinder ignition and 12V square wave applications.
Description
4,000 RPM
7,000 RPM
Size
Dwg.
33/8" (85 mm) dia. C
33/8" (85 mm) dia. C
For 24V applications, use resistor kit #391 103.
For technical specifications and dimensions, see pages 38 – 42.
15
Series 1 cont.
TEMPERATURE GAUGES,
Description
250˚F
300˚F
400˚F
Electrical, 21/16” (52 mm) dia.
Ω Range
On Dial
Dwg.
Terminal
Sender Table
Voltage
Part No.
VDO
VDO
VDO
”Water“
symbol
”Transmission“
G
G
G
Stud
Stud
Stud
A
B
C
12
12
12
310 304
310 305
310 303
Fitting Size
Voltage
Part No.
For 24V applications, use bulb #600 826.
See pages 30 & 31 for sender tables.
Mechanical, 21/16" (52 mm) dia.
Description
110°F
110°F
110°F
110°F
/
/
/
/
265°F
265°F
265°F
265°F
Length
48" cap.
72" cap.
144" cap.
288" cap.
On Dial
”Water“
”Water“
”Water“
”Water“
Dwg.
1/2 –14
I
I
I
I
NPT
NPT
1/2 –14 NPT
1/2 –14 NPT
12
12
12
12
Fitting Size
Voltage
Part No.
12
12
180 315
180 317
1/2 –14
180
180
180
180
310
301
302
308
For 24V applications, use bulb #600 826.
Mechanical, oil temperature, 21/16" (52 mm) dia.
Description
120°F / 340°F
120°F / 340°F
Length
72" cap.
144" cap.
On Dial
”Oil“
”Oil“
Dwg.
1/2 –14
I
I
1/2 –14
NPT
NPT
For 24V applications, use bulb #600 826.
Adapters
Description
1/2 –14
3/8 – 18
Part No.
NPT
NPT
180 066
180 067
PRESSURE GAUGES,
Description
80 PSI
100 PSI
Electrical, 21/16" (52 mm) dia.
Ω Range
On Dial
Dwg.
Terminal
Sender Table
Voltage
Part No.
VDO
VDO
”Oil“
”Oil“
G
G
Stud
Stud
1
3
12
12
350 303
350 306
Fitting Size
Voltage
Part No.
NPT
NPT
1/8 –27 NPT
12
12
12
150 330
150 307
150 306
Fitting Size
Voltage
Part No.
12
150 361
For 24V applications, use bulb #600 826.
See pages 28 & 29 for sender tables.
Mechanical, 21/16" (52 mm) dia., 1/8 – 27 NPT connection
Description
On Dial
100 PSI
150 PSI
150 PSI
”Oil“
”Air“
”Oil“
Dwg.
I
I
I
1/8 –27
1/8 –27
For 24V applications, use bulb #600 826.
Tubing kit not included, see page 34.
TURBO BOOST,
Mechanical, 21/16" (52 mm) dia.
Description
30 in. Hg. to 15 PSI
For 24V applications, use bulb #600 826.
Tubing kit not included, see page 34.
16
On Dial
Dwg.
”Turbo“
I
1/8 –27
NPT
Series 1 cont.
VACUUM GAUGES,
Mechanical, 21/16" (52 mm) dia.
Description
0-30 in. Hg. complete kit
0-30 in. Hg., gauge only
On Dial
Dwg.
Fitting Size
”Vacuum“ &
”in./Hg.“
”Vacuum“ &
”in./Hg.“
I
1/8 –27
I
1/8 –27
Voltage
Part No.
NPT
12
150 302
NPT
12
150 301
For 24V applications, use bulb #600 826.
Tubing kit not included, see page 34.
FUEL GAUGES,
Electrical, 21/16" (52 mm) dia.
Ω Range
On Dial
Dwg.
Terminal
Sender Table
Voltage
Part No.
For VDO sender 10 –180
For U.S. sender 240 – 33
For GM sender
0 – 90
(from 1965)
”Fuel“
”Fuel“
”Fuel“
G
G
G
Stud
Stud
Stud
11
12
13
12
12
12
301 301
301 302
301 303
Description
For 24V applications, use bulb #600 826.
See page 32 for sender tables.
VOLTMETERS,
Description
12V
12V
Electrical, 21/16" (52 mm) dia.
Range
On Dial
Dwg.
Terminal
Voltage
Part No.
8 – 16V
8 – 16V
–
w/color band
G
G
Stud
Stud
12
12
332 341
332 342
AMMETER (Non-shunted),
Description
60 Amp
Electrical, 21/16" (52 mm) dia.
Range
On Dial
Dwg.
Voltage
Part No.
60/0/60
”Amp“
L
12
190 301
For 24V applications, use bulb #600 826.
CLOCK,
Description
Analog
Electrical, 21/16" (52 mm) dia.
Range
Dwg.
Terminal
Voltage
Part No.
9 –28V
K
Spade
12/24
370 301
For 24V applications, use bulb #600 829.
For technical specifications and dimensions, see pages 38 – 42.
17
Industrial (service parts only)
PROGRAMMABLE TACHOMETERS w/LCD hourmeter
For use with all current electronic control unit (DDEC, etc.), inductive, alternator, standard ignition,
electronic ignition and hall-effect applications. Engine hours are displayed in the LCD window.
Description
3,000 RPM
4,000 RPM
Size
Dwg.
33/8"
(85 mm) dia. A
33/8" (85 mm) dia. A
Terminal
Voltage
Chrome
Black
Spade
Spade
12/24
12/24
333 561
333 563
333 562
333 564
For 24V applications, use bulb #600 826 (2x).
PROGRAMMABLE TACHOMETERS w/o hourmeter
For use with magnetic pickups.
Description
3,000 RPM
4,000 RPM
Size
Terminal
Voltage
Chrome
Black
(85 mm) dia.
33/8" (85 mm) dia.
Spade
Spade
12/24
12/24
333 531
333 533
333 532
333 534
33/8"
For 24V applications, use bulb #600 807.
PROGRAMMABLE TACHOMETER w/o hourmeter
For use with 4/6/8 cylinder ignition and 12V square wave application.
Description
Size
Terminal
Voltage
Chrome
Black
6,000 RPM
33/8" (85 mm) dia.
Spade
12
333 535
333 536
Terminal
Voltage
Chrome
Black
Spade
12/24
333 515
–
For 24V applications, use bulb #600 826 (2x) and resistor #391 032.
ALTERNATOR TACHOMETER w/o hourmeter
Description
4,000 RPM*
Size
21/16"
(52 mm) dia.
*For 24V applications, use resistor #391 032 and bulb #600 807, 2 1/16".
MECHANICAL TACHOMETER w/rev. counter, 3,500 RPM
Description
1:2 Ratio
18
Size
33/8"
(85 mm) dia.
Voltage
Chrome
Black
12
128 501B
–
Industrial (service parts only) cont.
TEMPERATURE GAUGES, 12V,
Description
Electrical, 21/16" (52 mm) dia.
Ω Range
On Dial
Dwg.
Terminal
Sender Table
Chrome
Black
VDO
VDO
VDO
“Water”
“Engine Oil”
“Trans Oil”
F
F
F
Spade
Spade
Spade
A
B
C
310 501
310 511
–
310 502
310 512
310 514
Voltage
Chrome
Black
12
12
12
180 501
180 503
180 505
–
180 504
–
250˚F / 120˚C
300˚F / 150˚C
400˚F / 200˚C
For 24V applications, use resistor kit #391 704.
See pages 30 & 31 for sender tables.
TEMPERATURE GAUGES,
Description
265°F / 130°C
265°F / 130°C
265°F / 130°C
Mechanical, 21/16" (52 mm) dia.
Length
On Dial
Dwg.
72" cap.
144" cap.
180" cap.
”Water“
”Water“
”Water“
H
H
H
Fitting Size
1/2 –14
NPT
NPT
1/2 –14 NPT
1/2 –14
For 24V applications, use bulb #600 826.
PRESSURE GAUGES, 12V,
Description
Electrical, 21/16" (52 mm) dia.
Ω Range
On Dial
Dwg.
Terminal
Sender Table
Chrome
Black
VDO
U.S.
VDO
VDO
VDO
VDO
VDO
“Engine Oil”
”PSI“
“Engine Oil”
“Engine Oil”
“Air”
Gear symbol
Trans. symbol
F
F
F
F
F
F
F
Spade
Spade
Spade
Spade
Spade
Spade
Spade
1
2
3
5
5
6
7
350 515
350 505
350 519
350 507
–
350 511
350 513
350 516
350 506
350 520
350 508
350 510B
350 512
–
Fitting Size
Voltage
Chrome
Black
12
12
12
12
12
12
12
150 505
150 507
150 509
150 513
150 511
–
–
150 506
150 508
150 510
150 514
–
150 518
150 520
2
80 PSI / 5 kp/cm
80 PSI / 5 kp/cm2
100 PSI / 7 kp/cm2
150 PSI / 10 kp/cm2
150 PSI / 10 kp/cm2
350 PSI / 25 kp/cm2
400 PSI / 28 kp/cm2
For 24V applications, use resistor kit #391 704.
See pages 28 & 29 for sender tables.
Mechanical, 21/16" (52 mm) dia.
Description
On Dial
2
Oil symbol
Oil symbol
ISO Oil symbol
“Air”
–
“Front Air”
“Rear Air”
30 PSI / 2 kp/cm
100 PSI / 7 kp/cm2
150 PSI / 10 kp/cm2
150 PSI / 10 kp/cm2
400 PSI / 28 kp/cm2
150 PSI / 10 kp/cm2
150 PSI / 10 kp/cm2
Dwg.
I
I
I
I
I
I
I
1/8 –27
1/8 –27
1/8 –27
1/8 –27
1/8 –27
1/8 –27
1/8 –27
NPT
NPT
NPT
NPT
NPT
NPT
NPT
For 24V applications, use bulb #600 826.
Tubing kit not included, see page 34.
FUEL GAUGES,
Electrical, 21/16" (52 mm) dia.
Ω Range
On Dial
Dwg.
Terminal
Voltage
Chrome
Black
For VDO sender 10 –180
For U.S. sender 240 – 33
Adjustable,
90 – 0
for tube type sender
“Fuel”
“Fuel”
“Fuel”
F
F
F
Spade
Spade
Spade
12
12
12
301 501
301 505
301 509
301 502
301 506
301 510
Description
For 24V applications, use resistor kit #391 704.
For technical specifications and dimensions, see pages 38 – 42.
19
Industrial (service parts only) cont.
VOLTMETERS,
Description
12V
24V
Electrical, 21/16" (52 mm) dia.
Range
Dwg.
Terminal
Voltage
Chrome
Black
8 –16V
18 – 32V
F
F
Spade
Spade
12
24
332 501
332 503
332 502
332 504
AMMETER (Non-shunted),
Description
60 Amp
Electrical, 21/16" (52 mm) dia.
Range
On Dial
Dwg.
Terminal
Voltage
Chrome
Black
60/0/60
”Amp“
L
Spade
12
190 501
190 502
On Dial
Dwg.
Terminal
Voltage
Chrome
Black
”Amp“
M
Spade
12
190 953
–
–
–
–
–
391 003
–
”Amp“
M
Spade
12
–
190 514
–
–
–
–
391 009
–
For 24V applications, use bulb #600 826.
AMMETERS (Shunted)
Description
Range
150 Amp,
150/0/150
complete kit
150 Amp,
–
shunt only w/lead wire
200 Amp,
200/0/200
gauge only
200 Amp,
shunt only
For 24V applications, use bulb #600 826.
20
DC Hourmeters (12/24V)
VDO has long since been a leading producer
of hourmeters, setting the standard for quality
and reliability worldwide. In fact, each hourmeter
is factory ”burnt-in“ assuring you of its reliability
and accuracy.
DC HOURMETERS,
Our selection is second-to-none in the industry,
allowing you to match your other instrument styles,
bezels and mounting configurations. We pay
attention to detail by providing several units in
illuminated, non-illuminated and waterproof versions.
Electrical, 21/16" (52 mm) dia.
Cockpit International*
Description
On Dial
Dwg.
Terminal
Voltage
Part No.
J
K
Spade
Spade
12/24
12/24
331 951
331 020
On Dial
Terminal
Voltage
Part No.
“Hours”
Spade
9 – 64
331 523
Non-illuminated
“Hours”
Illuminated
“Hours”
LCD Hourmeter, 21/16" (52 mm) dia.**
Description
Non-illuminated
Industrial**
Description
Illuminated
Non-illuminated
Illuminated
On Dial
Dwg.
Terminal
Voltage
Chrome
Black
“Engine Hours”
“Hours”
“Pump Hours”
K
K
K
Spade
Spade
Spade
12/24
12/24
12/24
331 501
331 503
331 517B
331 502
331 504
–
On Dial
Terminal
Voltage
Chrome
Black
“Hours”
Spade
12/24
331 511
331 512
On Dial
Terminal
Voltage
Part No.
Spade
12/24
331 514
Dwg.
Terminal
Voltage
Part No.
Q
Spade
12/24
331 534
Waterproof
Description
Non-illuminated
Three-hole flange
Description
Non-illuminated, waterproof “Hours”
Mini hourmeter
Description
On Dial
Rectangular, non-illuminated “Hours”
*For 24V applications, use bulb #600 826.
**For 24V applications, use bulb #600 807.
For technical specifications and dimensions, see pages 38 – 42.
21
BAI (Bus Analog Interface) System
The BAI (Bus Analog Interface) System from
VDO is the simple, economical solution to bridging
the gap between electronic engines and analog
instrumentation. BAI interprets and converts your
electronic engine’s digital signals and sends them
directly to your vehicle’s existing analog gauges.
BAI saves you money because it eliminates the
need to buy and install new gauges. BAI saves
you time because it’s easy to install on any diesel
engine. There is no clumsy wire harness to stuff
under the hood or dash. BAI requires only two
wires to run from the ECM (Electronic Control
Module) output plug to the unit.
With BAI, you can monitor up to 10 engine
and chassis functions – including speedometer,
tachometer and hourmeter. BAI includes 8
programmable channels for warning lights,
shutdowns and alarm systems, plus 3 additional
analog inputs to monitor air pressure, transmission
fluid and fuel levels, etc. BAI also allows you to
pre-set warnings, alarms and even shutdowns to
prevent engine damage.
BAI comes complete with easy-to-use, Windowsbased software that you can program for any
diesel system application based on SAE J1708 / 1587
protocols. Using your desktop or laptop computer,
you can program the system for one engine or an
entire fleet.
All units require programming.
Description
Voltage
Part No.
BAI extended w/3 analog inputs
8 –34
N03 321 008
BAI Technical Specifications
A multi-functional modular device that interprets signals and data from electronic engines
for interface to predetermined gauges, sound alarms and warning lamps.
Dimensions: Length: 104 mm (4.09 in.)
Width: 107 mm (4.29 in.)
Diagnostics: Coded blink light
Instrument Channels: Operates up to 10
analog or newer 4-20ma instruments including
tachometer, speedometer and hourmeter.
Alarm Outputs
8 Programmable Channels: for warning lights,
shut downs and alarm systems
7 Auxiliary Analog Inputs: for monitoring
additional chassis functions
Max. Alarm Outputs: 300ma
Electronic Capabilities
SAE J1708 /J1587 interface
CAN v2.0A (B passive) interface
EMC compatible
22
Electrical Capabilities
Operating Voltage:
8-34v
Current Consumption: 100ma (no load)
Output Voltage:
30v (continuous)
Input Voltage:
5-15v
(ignition switched)
Environmental Capabilities
Sealed/fluid resistant to IEC IP-65
(IP-67 pending)
Sealed connectors (as desired)
Thermal Operating Temperature
-10° to 70°C (14° –158°F)
Thermal Storage Temperature
-30° to 85°C (-22° –185°F)
N03 321 008
D’Mac System
Visibility and more of it is the trend in design
of today’s off-highway equipment. More glass
all around the cab means there’s less room for
gauges and monitoring equipment and the wiring
they require. This is why VDO developed the
D’Mac System.
D’Mac gives you a full display of vital engine
and chassis data in one compact instrument and
warning package. In fact, D’Mac’s LCD monitor
is only 100 mm square, about the size of a slice
of bread. It can easily be mounted centrally, so
the operator can check it with a quick glance.
D’Mac is one wire easy. No need for complicated
wire harnesses. With D’Mac CAN bus technology,
you run just one wire from the sensor to the
display. Fewer wires mean better reliability.
Plus, you save both space and installation time.
D’Mac includes visual pre-alarm systems to
warn of potential engine and chassis problems.
You can also program D’Mac to shut down your
vehicle before damage occurs. You can monitor
up to 8 signal inputs with a single D’Mac unit.
Check vehicle speed, engine speed, temperatures,
pressures, liquid levels and more. Add more sensor
units and you can monitor as many as 24 channels
of information. Plus, D’Mac gives you additional
data including an hourmeter, working hours, trip
distance and total distance.
With the optional data archiving unit, you can
store and review all warnings and alarms that
occurred during equipment operation. Program
service information into D’Mac and the system
alerts the operator when it’s time for regular
check-ups and maintenance.
D’Mac Technical Specifications
Display Unit
(L = 100 mm, W = 100 mm, D = 73 mm)
Rated Voltage:
12–24v DC
Operating Voltage:
10.5 – 32v DC
EMC:
DIN 40839, part 1, 3, 4
EN 50081, part 2
EN 50082, part 1
CE Certified to:
89/336 EWG
KBA Registration:
72/245 resp. 95/54
Vibration Strength:
1g, 25 – 2,000 Hz
Permanent Shock:
25g, 1 Hz, 6ms
Oper./Storage Temp.: -20° to 80°C
Protection:
IP65 DIN 40 050 front
IP20 DIN 40 050 back
Input Signal Illum.:
10, 8–32v
Type of Connection:
AMP MTA 156
pin connector
Display LCD:
Dim.: 72x72 mm visible
Illum.: LED white
(life cap.
60,000h)
Color:
green
Projection:
non-inverse
Pickup:
segment multiplex oper.
Segments No.:
204
Visual Angle:
NL 10 – 80,
DIN 16 257
Sensor Unit
(L = 112 mm, W = 132 mm, D = 35 mm)
Rated Voltage:
12–24v DC
Operating Voltage:
10.5 – 32v DC voltage
hall sensor at 24v =12v
EMC:
DIN 40839, part 1, 3, 4
EN 50082, part 2
EN 50082, part 1
CE Certified to:
KBA Registration:
Vibration Strength:
Permanent Shock:
Oper./Storage Temp.:
Protection:
Type of Connection :
89/336 EWG
72/245 resp. 95/54
3g, 25 – 2,000 Hz
25g, 1 Hz, 6ms
-40° to 85°C
IP65 DIN 40 050
AMP Econoseal 156
pin connector
Keypad
(L = 54 mm, W = 54 mm, D = 20 mm)
Control Field:
Keypad foil
(protected by
plastic frame)
Protection:
IP65 DIN 40 050
front
Type of Connection:
AMP MTA 156
pin connector
Data Recorder
(L = 130 mm, W = 137.5 mm, D = 33 mm)
Rated Voltage:
12–24v DC
Operating Voltage:
10.5 – 32v DC
EMC:
DIN 40839,
part 1, 3, 4
EN 50081, part 2
EN 50082, part 1
CE Certified to:
89/336 EWG
KBA Registration:
72/245 resp. 95/54
Vibration Strength:
5g, 10–500 Hz,
1 octave/min.
Permanent Shock:
25g, 1 Hz, 6ms
Oper./Storage Temp.: -40° to 85°C
Protection:
IP53 DIN 40 050
Type of Connection:
AMP, 25-pole
D’Mac System
(sensor unit, LCD display, keypad)
Full representation
of the display
Please call for part numbers and details.
For technical specifications and dimensions, see pages 38 – 42.
23
E-Gas ®® Electronic Actuator System
Here is the affordable way to add safety and
comfort . . . plus solve the technical issues associated
with mechanically actuated cable systems – the
E-Gas® System from VDO. E-Gas can be used
for engine acceleration or anywhere that you
need electronic actuation for smooth, controlled
operation. The system consists of a fully
programmable regulator and electronic actuator
that can be driven by any PWM signal device.
Available options include a foot pedal or setpoint sensor for level operation.
With E-Gas, you get simple, PC-based
programmability, integrated diagnostics,
actuator limitations, the ability to regulate
or limit working speed and frequency/analog
inputs for great control.
Please call for part numbers and details.
Electronic Regulator (Electronics)
E-Gas Technical Specifications
Electronic Regulator (Electronics)
Normal Voltage:
12–24V
Test Voltage:
14–28V
Operating Voltage:
9.5–30V
Oper.Temp. Range:
-40°C to +70°C
Storage Temp.:
-40°C to +80°C
Standards:
protection IP 53/
DIN 40050
Fault Memory:
in EEPROM
Fault Output:
via flasher or
diagnostics interface
Installation Site:
driver’s cab
Electric Actuator
Normal Voltage:
Oper.Temp. Range:
Storage Temp.:
Rated Torque:
Response Time:
(typical):
Positioning Angle:
Standards:
Normal Voltage:
Response Time:
Set-Point Sensor
Oper. Voltage:
Oper. Temp. Range:
Storage Temp.:
Initial Torque:
Final Torque:
Kickdown Torque:
Standards:
Pedal Unit
Service Voltage:
Oper. Temp. Range:
Storage Temp.:
Standards:
Signal:
24
24V
-25°C to +90°C
-35°C to +115°C
250 Ncm
≤ 1 sec.
750 ms
87°± 3°
protection IP 56A/
DIN 40050
12V
< 2 sec.
supplied thru regulator
-30°C to +80°C
-30°C to +90°C
160 Ncm + 20 Ncm/
-30 Ncm
280 Ncm ± 40 Ncm
550 Ncm ± 40 Ncm
protection IP 66/
DIN 40050
supplied thru regulator
-40°C to +80°C
-40°C to +100°C
protection IP 54/
DIN 40050
PWM
Electric Actuator
Set-Point Sensor
Pedal Unit
Windshield Washer System
VDO Windshield Washer Systems were developed
to meet the demanding requirements of construction
and agricultural equipment and specialty vehicles.
The system is comprised of a washer container
with integrated pump, filter, mounting hardware
and optional low level sensor. Available in
12- and 24-volt models both for single and dual
washer applications.
The fully adjustable single and dual nozzles
are made of high-quality chrome plated brass for
long-term durability, less clogging and versatility
for use in any application. Installation kits include
hose, hose fittings, check valve and wiring harness
complete with pump connector.
Washer System, 1.5 Liter / 1.6 Quarts
Description
Pkg. Qtys.
Windshield only, 12V
Windshield only, 24V
Dual two window, 12V
Windshield only, 12V,
with warning switch
Dual two window, 12V,
with warning switch
Part No.
10
10
10
10
X10
X10
X10
X10
246
246
246
246
001
001
001
001
007
008
009
010
10
X10 246 001 011
Washer System, 4.0 Liter / 4.24 Quarts
Description
Windshield only, 12V
Windshield only, 24V
Dual two window, 12V
Pkg. Qtys.
Part No.
6
6
6
X10 246 001 012
X10 246 001 013
X10 246 001 014
Washer System, 6.0 Liter / 6.36 Quarts
Description
Windshield only, 12V
Windshield only, 24V
Dual two window, 12V
Pkg. Qtys.
Part No.
10
10
10
X10 246 001 015
X10 246 001 016
X10 246 001 017
Pkg. Qtys.
Part No.
1
1
1
1
1
X10 246 001 018
X10 246 001 019
246 068 003 001G
246 069 006 006G
(ask for information)
1
4 633 030 007B
Accessories
Description
Installation kit, 12V applications
Installation kit, 24V applications
Single squirt adjustable nozzle
Dual squirt adjustable nozzle
“Heated,” dual squirt
adjustable nozzle, 12V
Momentary push button
Windshield Washer System Technical Specifications
Bottle
Content:
Materials:
1.5L (1.6 Quarts)
4.0L (4.24 Quarts)
6.0L (6.36 Quarts)
Temperature-resistant from
-30°C to +100°C, weatherresistant and aging-resistant
VDO Dual Pump, 12V
Pressure:
P= +2.1 bar
Flow Rate:
V= 2.0 i/min
Current Consumption: V= 2.0 i/min
Shown on Left:
246 069 006 006G
Shown on Right:
246 068 003 001G
Connecting Elements
Material:
weather-resistant and
aging-resistant
VDO Monopump, 12V
Pressure:
P= +2.2 bar
Flow Rate:
V= 2.0 i/min
Current Consumption: V= 2.0 i/min
VDO Monopump, 24V
Pressure:
P= +1.8 bar
Flow Rate:
V= 1.0 i/min
Current Consumption: l= max =1.2A
25
230 Series Heavy-Duty Pressure Switch
The Series 230 Heavy-Duty Pressure Switches
provide an economical and reliable choice for
a multitude of pressure switch applications.
Available in a variety of part numbers to
cover most commonly demanded set points.
Optional set points may also be field set to
meet customer requirements.
Series 230 Pressure Switches are compact and
compatible with a wide variety of fluids, making
them ideal for most engine, brake, hydraulic and
air system applications. All switches are provided
with an insulated ground terminal to assure a
quality ground circuit.
Normally Open – Single Circuit; 2 terminals, insulated ground
Range
Part No.
4 PSI
15 PSI
60 PSI
230 404
230 415
230 460
Normally Closed – Single Circuit; 2 terminals, insulated ground
Range
Part No.
4 PSI
15 PSI
60 PSI
230 504
230 515
230 560
Dual Circuit – normally open, normally closed, insulated ground
Range
Part No.
4 PSI
15 PSI
60 PSI
230 604
230 615
230 660
Overall Dimensions: Length = 2.52" / Width = 1.47"
Heavy-Duty Pressure Switch Technical Specifications
Normally Open: Contacts open until pressure rises which then completes the circuit.
Normally Closed: Contacts closed until pressure rises which then breaks the circuit.
Direct action blade contact pressure switches with adjustable contact ranges:
4 – 7 PSI ± 1; 14 – 24 PSI ± 3; 51 – 90 PSI ± 7
Contacts: Silver alloy, gold-plated
Operating Pressure (Set Point Range)
4 –24 PSI = 150 PSI 25 – 90 PSI = 250 PSI
Proof Pressure: 500 PSI
Burst Pressure (Set Point Range)
4 –24 PSI = 750 PSI 25 – 90 PSI = 1,250 PSI
Base: Brass
Diaphragm: Polyimide film
Cover: Glass reinforced polyester
Electrical Ratings
Resistive:
15 Amp – 6 VDC
8 Amp –12 VDC
4 Amp –24 VDC
Inductive:
1 Amp –120 VAC
5 Amp –240 VAC
(2 terminal configuration)
Temperature Range: -40°F to 250°F
Terminals: 1/4" blade, #8 – 32 screws
Thread Size: 1/8 –27 NPT
(3 terminal configuration)
26
232 Series Temperature Switches
Temperature Switch Technical Specifications
Switching Capacity: 1.2W to3W, non-inductive for monitoring
various mediums
Normally Open, Single Circuit, Standard Ground Systems
Rated Voltage: 6V to 24V
Type of Contact:
SS=contact close as temperature rises
OS=contact open as temperature rises
Break Point: 5°C max. below make point
Contacting Mode: Slow-acting
Types of Connections
.250"
illus. A
illus. B
Hex nut
.187"
illus. E
illus. H
Temperature Switches Table
Make Point +°C
Thread
Max.
Type
L (mm)
Ø (mm)
Order No.
210 ± 10 SS
M10 x 1.5
240
E
38.5
6.9
232 011 005 012
195 ± 10 SS
M10 x 1.5
250
E
38.5
6.9
232 011 019 003
170 ± 5 SS
M10 x 1.5
220
E
38.5
6.9
232 011 005 004
150 ± 5 SS
M10 x 1.5
200
E
38.5
6.9
232 011 005 017
145 ± 5 SS
M10 x 1.5
210
E
38.5
6.9
232 011 005 005
135 ± 10 SS
M10 x 1.5
180
E
38.5
6.9
232 011 005 015
125 ± 5 SS
M10 x 1.5
155
E
38.5
6.9
232 011 005 011
120 ± 5 SS
M10 x 1.5
170
E
38.5
6.9
232 011 005 014
120 ± 3 SS
1/ –14 NPTF
2
130
B
29
10
232 011 017 005
110 ± 3 SS
M10 x 1
150
E
33
6.9
232 011 005 024
105 ± 3 SS
M14 x 1.5
150
E
29
10
232 011 017 136
105 ± 3 SS
1/ –14 NPTF
2
120
A
29
10
232 011 017 041
105 ± 3 SS
3/ –27 NPTF
8
120
E
33
6.9
232 011 005 020
105 ± 3 SS
3/ –18 NPTF
8
120
H
29
10
232 011 017 145
103 ± 3 SS
1/ –14 NPTF
2
120
A
29
10
232 011 017 131
103 ± 3 SS
3/ –18 NPTF
8
120
A
29
10
232 011 017 139
96 ± 3 SS
1/ –27 NPTF
8
120
E
33
6.9
232 011 055 019
95 ± 3 SS
1/ –14 NPTF
2
120
A
29
10
232 011 017 039
93 ± 3 SS
3/ –18 NPTF
8
120
A
29
10
232 011 017 088
90 ± 3 SS
M10 x 1.5
120
E
38.5
6.9
232 011 005 003
27
Pressure Senders
Types of Connections
Warning
Ground
Gauge
Gauge
Gauge
illus. 1
illus. 2
illus. 3
Standard Ground:
sender case to
common ground
Floating Ground:
isolated terminal to
common ground; and
Dual Station Floating
Ground
Standard Ground
with Warning Contact
Table 1: 80 PSI / 5 bar (10 –180 OHM)
Thread
Warning Contact
(illus. 3)
Std. Ground
(illus. 1)
Floating Ground
(illus. 2)
Dual Station
(illus. 1)
Dual Station
Floating Ground
(illus. 2)
# Stamped
on Sender
Washer
Required
1/ – 27 NPT
8
–
360 003
–
–
–
29/4
–
1/ – 27 NPT
8
–
–
360 410
–
–
32/1
–
1/ – 27 NPT
8
–
–
–
–
362 001
1/1
–
1/ – 27 NPT
8
7.0 PSI
360 009
–
–
–
30/23
–
1/ – 27 NPT
8
–
–
–
362 033
–
3/1
–
1/ –18 NPT
4
–
360 005
–
–
–
29/8
–
1/ –18 NPT
4
8.0 PSI
360 019
–
–
–
30/20
–
1/ –18 NPT
4
–
–
360 441B
–
–
32/16
–
1/ – 28 BSP
8
–
360 080
–
–
–
29/61
–
M10 x 1K
–
360 001
–
–
–
29/1
–
M10 x 1K
7.0 PSI
360 006
–
–
–
30/2
–
M10 x 1K
10.0 PSI
360 034
–
–
–
30/4
–
M12 x 1.5
–
360 002
–
–
–
29/85
X
M12 x 1.5
8.5 PSI
360 007
–
–
–
30/6
X
M14 x 1.5
–
360 027
–
–
–
29/26
X
M15 x 1.5
7.1 PSI
360 028
–
–
–
30/28
X
Universal Sender Kit includes 360 003 sender, 1/4 –18", 3/8 –18" and 1/2 –14" bushing.
360 900
Table 2: 80 PSI / 5 bar (240 –33 OHM)
Thread
Warning Contact
(illus. 3)
Std. Ground
(illus. 1)
Floating Ground
(illus. 2)
Dual Station
(illus. 1)
Dual Station
Floating Ground
(illus. 2)
# Stamped on Sender
1/ – 27 NPT
8
–
360 801
–
–
–
AT 84200
Table 3: 100 PSI / 7 bar (10 –180 OHM)
Thread
Warning Contact
(illus. 3)
Std. Ground
(illus. 1)
Floating Ground
(illus. 2)
Dual Station
(illus. 1)
Dual Station
Floating Ground
(illus. 2)
# Stamped on Sender
1/ – 27 NPT
8
–
360 086
–
–
–
655
28
Table 4: 100 PSI / 7 bar (240 – 33 OHM)
Thread
Warning Contact
(illus. 3)
Std. Ground
(illus. 1)
Floating Ground
(illus. 2)
Dual Station
(illus. 1)
Dual Station
Floating Ground
(illus. 2)
# Stamped on Sender
1/ – 27 NPT
8
–
360 811
–
–
–
734
Table 5: 150 PSI / 10 bar (10 –180 OHM)
Floating Ground
(illus. 2)
Dual Station
(illus. 1)
Dual Station
Floating Ground
(illus. 2)
# Stamped
on Sender
Washer
Required
360 004
–
–
–
29/12
–
–
360 430
–
–
32/14
–
–
–
–
362 034
–
3/2
–
–
–
–
–
362 002
1/2
–
1/ – 27 NPT
8
11.4 PSI
360 025
–
–
–
30/15
–
1/ – 28 BSP
8
–
360 081
–
–
–
29/62
–
1/ –18 NPT
4
–
360 021
–
–
–
29/20
–
M10 x 1K
–
360 015
–
–
–
29/10
–
M10 x 1K
7.0 PSI
360 023
–
–
–
30/9
–
M10 x 1K
29.6 PSI
360 033
–
–
–
30/41
–
M12 x 1.5
–
360 016
–
–
–
29/13
X
M12 x 1.5
7.0 PSI
360 024
–
–
–
30/22
X
Thread
Warning Contact
(illus. 3)
Std. Ground
(illus. 1)
1/ – 27 NPT
8
–
1/ – 27 NPT
8
–
1/ – 27 NPT
8
1/ – 27 NPT
8
Universal Sender Kit includes 360 004 sender, 1/4 –18", 3/8 –18" and 1/2 –14" bushing.
360 905
Table 6: 350 PSI / 25 bar (10 –180 OHM)
Thread
Warning Contact
(illus. 3)
Std. Ground
(illus. 1)
Floating Ground
(illus. 2)
Dual Station
(illus. 1)
Dual Station
Floating Ground
(illus. 2)
# Stamped
on Sender
Washer
Required
1/ – 27 NPT
8
–
–
360 431
–
–
38/3
–
1/ – 27 NPT
8
–
–
–
362 035
–
4/1
–
1/ – 27 NPT
8
–
–
–
–
362 003
2/1
–
3/ –18 NPT
8
–
–
360 432
–
–
38/2
–
3/ –18 NPT
8
–
–
–
–
362 007
2/2
–
M14 x 1.5
–
–
360 442
–
–
38/1
X
Table 7: 400 PSI / 28 bar (10 –180 OHM)
Thread
Warning Contact
(illus. 3)
Std. Ground
(illus. 1)
Floating Ground
(illus. 2)
Dual Station
(illus. 1)
Dual Station
Floating Ground
(illus. 2)
# Stamped on Sender
1/ – 27 NPT
8
–
–
360 406
–
–
38/8
1/ – 27 NPT
8
–
–
–
362 004
–
2/3
Table 8: 30 PSI / 2 bar (10 –180 OHM)
Thread
Warning Contact
(illus. 3)
Std. Ground
(illus. 1)
Floating Ground
(illus. 2)
Dual Station
(illus. 1)
Dual Station
Floating Ground
(illus. 2)
# Stamped on Sender
1/ – 27 NPT
8
–
–
360 043
–
–
32/25
29
Temperature Senders
Types of Connections
*
1-pole common grd.
s
1-pole common grd.
T
1-pole common grd.
1-pole common grd.
hex nut
◊
illus. 1
Standard Ground:
sender case to
common ground
Table A: 250°F / 120°C
Thread
Terminal
Type
Warning
Contact
(illus. 4)
1/ – 27 NPT
8
T
–
323 095
1/ –18 NPT
4
–
323 420
–
–
–
801/1/9
–
–
–
323 477
–
–
805/1/7
–
–
–
–
325 001
–
801/2/1
–
–
–
–
–
325 002
805/3/1
–
3/ –18 NPT
8
*
*
*
*
*
–
323 094
–
–
–
801/1/7
–
3/ –18 NPT
8
◊
–
323 421
–
–
–
801/1/38
–
3/ –18 NPT
8
–
–
323 479
–
–
805/1/5
–
–
–
–
325 008
–
801/2/4
–
–
–
–
–
325 007
805/3/3
–
1/ –14 NPT
2
*
*
*
*
–
323 093
–
–
–
801/1/10
–
1/ –14 NPT
2
◊
–
323 419
–
–
–
801/1/16
–
323 097
–
–
–
803/1/37
–
205°F ± 5°F
323 098
–
–
–
803/1/19
–
217°F ± 5°F
323 099
–
–
–
803/1/25
–
230°F ± 5°F
323 100
–
–
–
803/1/32
–
–
–
323 478
–
–
805/1/4
–
5/ –18 NF-3
8
**
**
**
**
*
**
195°F ± 5°F
209°F ± 5°F
323 026
–
–
–
803/1/2
–
5/ –18 UNF
8
◊
–
323 422
–
–
–
801/1/25
–
5/ –18 UNF
8
–
–
–
–
325 003
805/3/2
–
–
–
323 483
–
–
805/1/2
–
5/ –18 NF-3
8
*
*
*
203°F ± 5°F
323 487
–
–
–
803/1/11
–
M10 x 1
T
–
323 088
–
–
–
801/17/1
X
M14 x 1.5
◊
–
323 416
–
–
–
801/1/26
X
–
323 425
–
–
805/1/1
X
M16 x 1.5
*
**
–
203°F ± 5°F
323 028
–
–
–
803/1/7
X
M16 x 1.5
◊
–
323 417
–
–
–
801/1/29
X
M18 x 1.5
*
–
323 418
–
–
–
801/1/22
X
1/ –18 NPT
4
1/ –18 NPT
4
1/ –18 NPT
4
3/ –18 NPT
8
3/ –18 NPT
8
1/ –14 NPT
2
1/ –14 NPT
2
1/ –14 NPT
2
1/ –14 NPT
2
1/ –14 NPT
2
5/ –18 UNF
8
M14 x 1.5
Std. Ground
(illus. 1)
Floating Ground
(illus. 2)
Dual Station
(illus. 3)
Dual Station
Floating Ground
(illus. 2)
# Stamped
on Sender
Washer
Required
–
–
–
801/5/1
–
Universal Sender Kit includes 323 095 sender, 1/4 –18", 3/8 –18" and 1/2 –14" bushing
and .250 (1/4") spade terminal
30
323 900
Types of Connections
1-pole common grd.
*
**
Connection Key
G= .250" spade conn.
W= .187" spade conn.
* Straight .250" spade
terminal
Warning
Gauge
illus. 2
illus. 3
illus. 4
Floating Ground:
isolated terminal to
common ground
Dual Station:
2 gauges operation
from single sender
Dual Station
Floating Ground:
same as Dual Station;
however, isolated
terminal to ground
◊
4 mm screw stud
s
90° angle .250" spade
spade terminal
T
.250" ”posi lock”
terminal
* 56 Series ”Packard”
female terminal, unsealed
w/terminal housing
** Gauge .250" spade
terminal; Warning
.187" spade terminal
Table B: 300°F / 150°C
Thread
Terminal
Type
Warning
Contact
(illus. 4)
1/ – 27 NPT
8
T
–
323 057
1/ –18 NPT
4
◊
–
323 058
–
–
–
801/4/17
–
–
323 485
–
–
805/3/2
–
3/ –18 NPT
8
*
*
–
–
323 059
–
–
–
801/4/15
–
1/ –14 NPT
2
◊
–
323 060
–
–
–
801/4/6
–
1/ –14 NPT
2
**
250°F ± 5°F
323 120
–
–
–
803/2/15
–
5/ –18 UNF
8
◊
–
323 061
–
–
–
801/4/9
–
5/ –18 UNF
8
*
–
–
323 431
–
–
805/3/3
–
M10 x 1
T
–
323 423
–
–
–
801/9/3
X
M12 x 1.5
T
–
323 092
–
–
–
801/10/3
X
M14 x 1.5
s
–
323 055
–
–
–
801/12/2
X
M16 x 1.5
s
–
323 056
–
–
–
801/12/1
X
M18 x 1.5
s
–
323 064
–
–
–
801/12/3
X
M22 x 1.5
s
–
323 066
–
–
–
801/12/4
X
1/ –18 NPT
4
Std. Ground
(illus. 1)
Floating Ground
(illus. 2)
Dual Station
(illus. 3)
Dual Station
Floating Ground
(illus. 2)
# Stamped
on Sender
Washer
Required
–
–
–
801/9/1
–
Universal Sender Kit includes 323 057 sender, 1/4 –18", 3/8 –18" and 1/2 –14" bushing
and .250 (1/4") spade terminal
323 905
Table C: 400°F / 200°C
Thread
Terminal
Type
Warning
Contact
(illus. 4)
Std. Ground
(illus. 1)
1/ – 27 NPT
8
T
–
323 050
(Long probe, 5/8" long) Ford
(Short probe, 3/8" long) GM
Floating Ground
(illus. 2)
Dual Station
(illus. 3)
Dual Station
Floating Ground
(illus. 2)
# Stamped
on Sender
Washer
Required
801/13/1
–
1/ – 27 NPT
8
T
–
323 086
801/18/1
–
M10 x 1.5
T
–
323 091
–
–
–
801/3/1
X
M10 x 1
T
–
323 090
–
–
–
801/3/2
X
For technical specifications and dimensions, see pages 38 – 42.
31
Fuel Level Senders
Table 11: Fuel Level Senders
Lever Arm Fuel Senders (10–180 OHM), adjustable for tank depths 6" to 23"
Description
Part No.
Fuel sender, VDO OHM range
226 001
Replacement gasket, 2 1/8" (54 mm), neoprene
226 053
Table 12: Fuel Level Senders
Lever Arm Fuel Senders (240–33 OHM), adjustable for tank depths 6" to 23"
Description
Part No.
Fuel sender, U.S. OHM range
226 007
Replacement gasket, 2 1/8" (54 mm), neoprene
226 053
226 001
Table 13: Fuel Level Senders
Lever Arm Fuel Senders (0–99 OHM), adjustable for tank depths 6" to 23"
Description
Part No.
Fuel sender, GM OHM range
226 008
Replacement gasket, 2 1/8" (54 mm), neoprene
226 053
Table 14: Fuel Level Senders
Tube Type Fuel Level Sender w/neg. ground (90–0 OHM), adjustable fuel gauges only
Length (inch)
Length (mm)
Stamped on Sender
Part No.
5 1/8"
131.5 mm
82/8/17
224 058
8 11/16"
221.5 mm
82/8/21
224 061
9 15/16"
251.5 mm
82/6/97
224 062
11"
279.5 mm
82/7/22
224 055
12 1/4"
310.5 mm
82/5/136
224 063
14 5/8"
372 mm
82/7/4
224 065
15 15/16"
404.5 mm
82/5/142
224 054
17 1/16"
433.5 mm
82/5/98
224 066
19 5/8"
498.5 mm
82/5/117
224 067
22"
559 mm
82/7/58
224 003
23 7/8"
596 mm
82/7/17
224 069
27 1/4"
692 mm
82/5/11
224 004
31"
787.5 mm
82/5/72
224 049
32 7/8"
835 mm
82/5/34
224 051
Replacement gasket, 2 1/8" (54 mm), bolt circle, neoprene
226 053
Replacement gasket, 3 1/8" (80 mm), bolt circle, cork
600 525
Table 15: Fresh Water Level Senders
Lever Arm Water Senders (10–180 OHM), adjustable for tank depths 8" to 24"
Description
Part No.
Stainless steel water level sender, VDO OHM range
226 452
Replacement gasket, 2 1/8" (54 mm), bolt circle, neoprene
226 053
32
226 053
224 055
Speedometer &
& Tachometer
Tachometer Senders
Senders
Speedometer
Generator Senders
For use with VDO speedometers and tachometers designated
as generator-type
Without odometer / revolution counter terminal
Description
Part No.
7/8 –18
thread
M22 x 1.5 thread
340 001
340 002
Drive keys for generator senders listed above
Description
.152"
.187"
.203"
.104"
.200"
–
–
–
–
–
Part No.
tang
tang
tang
square
Perkins
340
340
340
340
340
340 001
060
061
062
065
064
340 060
Inductive / Magnetic Pick-Up Sender
For inductive and programmable speedometers and tachometers
Description
2" long,
3/4 –16
Part No.
thread
340 020
340 020
Hall-Effect
For electronic, programmable speedometers, 7/8 – 18 thread, 16 pulse
Description
Part No.
Standard, GM
GM, through-drive, for cruise control hook-up
Ford, plug-in
Ford, plug-in, through-drive
340
340
340
340
011
012
013
014
340 011
340 013
33
Gauge Accessories
Tubing Kits
Description
6' plastic tubing
16' plastic tubing
6' copper tubing
Fitting Size
1/8 – 27
Part No.
1/4– 18
and
NPT adapters
and 1/4– 18 NPT adapters
1/8 – 27 and 1/4– 18 NPT adapters
1/8 – 27
150 851
150 855
150 856
Wiring Kit
Includes necessary wire and terminals.
Tubing Kits
Description
Part No.
For all instruments except ammeters
240 023
Pressure Sender Adapters
Includes hose adapter and clamp for remote mounting pressure
senders. Designed especially for high-vibration applications.
Description
1/8 – 27
NPT
Length
Part No.
16"
240 902
Pressure Sender Adapters
T–Adapters
Description
Part No.
1/8 – 27
NPT
Male
Male M10 x 1
240 855
240 850
T-Adapters
Shock Mount Grommet
Description
Part No.
For 21/16" (52 mm) diameter instruments
240 832
Safety Mount Brackets for 21/16" (52 mm) dia. instruments
Made of a flexible, rubber material for cockpit safety. Matte black.
Description
Wiring Kits
Dimensions (H x D x L)
Part No.
37/8" x 11/4" x 21/2"
37/8" x 11/4" x 47/8"
37/8" x 11/4" x 71/2"
240 802
240 803
240 804
1 opening
2 openings
3 openings
Shock Mount Grommet
Safety Mount Brackets
Mounting Cups
Steel mounting cups with smooth black or chrome finishes.
Description
Chrome
Black
For 21/16" (52 mm) dia. gauge
For 33/8" (85 mm) dia. gauge
240 017* 240 016*
240 019 240 018
*Will not work with 21/16" dia. clocks, tachometers, outside temp. gauges or pyrometers.
Mounting Cups
34
Gauge Accessories cont.
Mounting Brackets for 21/16" (52 mm) dia. instruments
VDO mounting brackets are metal with smooth black or chrome
finishes. 1, 2 and 3 opening units.
Description
Dimensions (H x D)
1 opening
2 openings
3 openings
27/8" x 211/16"
27/8" x 5 3/16"
27/8" x 71/2"
Chrome
Black
240 034 240 027
240 035 240 028
240 036 240 029
Custom Mini-Console for 21/16" (52 mm) dia. instruments
Consoles are made of durable ABS plastic with black leatherlike finish. Can be surface mounted to nearly any flat surface,
horizontally or vertically. Consoles are angled toward driver
for maximum readability.
Description
Dimensions (H x D x L)
Part No.
1 opening
2 openings
3 openings
2" x 31/8" x 41/2"
2" x 33/8" x 8"
2" x 33/8" x 111/2"
110 860
110 861
110 862
Mounting Brackets
PLEASE NOTE: An additional 21/2" of depth is required beneath console to ensure proper
installation of gauges.
Custom Mini Consoles
Adjustable Mounting Cups
In durable ABS plastic with matte black finish.
Description
Part No.
For all 21/16" dia. electrical gauges,
except outside temp. gauge, pyrometer, clock,
ammeter and 21/16" dia. tach.
1
2 /16" dia., long version for outside temp. gauge,
pyrometer, clock, ammeter and 21/16" dia. tach.
240 100
240 101
Blind Covers
Description
Part No.
21/16" (52 mm) dia.
33/8" (85 mm) dia.
240 864
240 866B
Adjustable Mounting Cups
Reducing Rings
VDO’s matte black mounting rings permit the installation of smaller
units in larger existing dashboard openings.
Description
23/8"
Part No.
21/16"
to
From
From 27/8" to 21/16"
From 33/8" to 31/8"
600 851
600 884
600 885
35
Gauge Accessories cont.
Resistors
For conversion of 12V electrical instruments (except clocks and
hourmeters) to 24V systems. Conversion of instruments to 24V systems
may require installing a new bulb. See page 37 for bulb listings.
Description
Part No.
Resistor only for tachometers w/o hourmeters,
21/16" (52 mm) dia. tachometers, outside temperature
gauges, pyrometers and shunted ammeters.
391 101
21/16"
Resistor only for all
(52 mm) dia. instruments
except clocks, hourmeters, 52 mm dia. tachometers,
outside temperature gauges, pyrometers and shunted
ammeters. Includes additional terminals for use with
stud terminal instruments.
391 102
Resistor, 33/8" tachometers w/o hourmeter
For 21/16" alternator tachometers.
Description
Resistor
Resistor Kit
For 3 3/8" programmable tachometers w/o hourmeter.
Description
Resistor and two (2) 24V bulb
Resistor Kit
For Industrial Line instruments only.
Description
Part No.
391 032
600 402
Part No.
391 103
Part No.
Resistor and 24V bulb
391 704
32V Resistor, 150 Ω, 5 watt
391 702
Stud Mounting Kits
For converting Spin-Lok™ mounted instruments to stud type mounting.
Gauge Diameter
21/16" (52 mm)
31/8" (80 mm), 33/8" (85 mm)
Replacement Spin-Lok™ Mounting Rings
Gauge Diameter
600 402
600 401
Part No.
Amp connector (amp part #163007)
Terminal (not shown) (part #421 001-1)
36
600 404
Part No.
Housing w/crimp connectors
240 026
Housing w/o crimp connectors
600 814
for use on Cockpit and Industrial
Housing w/crimp connectors
240 025
Housing w/o crimp connectors
999 115 015
for use on Vision and Cockpit International
w/spade terminals
Push-On Amp Connector for Speedometers and Tachometers
Description
600 405
Part No.
600 404
21/16" (52 mm)
600 405
31/8" (80 mm)
33/8" (85 mm)
600 406
4" (100 mm)
600 407
Push-On Connectors
Provides convenient installation for 21/16" (52 mm) dia. temperature,
pressure and fuel gauges with three-prong connectors.
Description
391 704
240 026
Part No.
999 115 016
999 115 016
Light Bulbs and Sockets
Type A: Fits sockets #600 813, #600 816 and #600 817
Description
9/32"
12V, 2W
24V, 3W
Type B: Fits sockets #600 818 and #600 819
9/32"
Description
11/32"
12V, 2W
12V, 4W
Type C: Fits socket #600 821
11/32"
Description
3/8"
12V, 2W
Type D: (peanut type): Fits socket #600 823
Description
Peanut bulb, 12V, 1.2W
Peanut bulb, 24V, 1.2W
Type E: Fits socket #600 839
Part No.
A
B
C
D
600 802
600 807
Part No.
600 804
600 806
Part No.
E
600 820
Part No.
600 809
600 829
Description
Part No.
Wedge-base bulb, 12V
Wedge-base bulb, 24V
600 815
600 826
600 813
600 819
600 823
600 840
600 816
600 817
600 821
600 818
INSULATED LIGHT BULB SOCKETS
Description
3/8",
uses bulb type A
uses bulb type B
Uses peanut-type bulb D
Uses wedge-type bulb E
Uses peanut-type bulb D
15/32",
Part No.
600
600
600
600
600
813
819
808
840
823
LIGHT BULB SOCKETS
Description
3/8"
steel, uses bulb type A
brass, uses bulb type A
5/8" steel, uses bulb type C
15/32" steel, uses bulb type B
3/8"
Part No.
600
600
600
600
816
817
821
818
LIGHT DIFFUSERS
The easy and convenient way to change the lighting color in your
VDO gauge. Simply slips over light bulb to give your dash a whole
new color at night.
Description
Part No.
Red, Type A, 9/32" bulb
Green, Type A, 9/32" bulb
Red, Type B, 11/32" bulb
Green, Type B, 11/32" bulb
Red, Type D, “peanut” bulb
Green, Type D, “peanut” bulb
Red, Types E and C bulbs
Green, Types E and C bulbs
600
600
600
600
600
600
600
600
853
856
857
858
859
860
861
862
Light Diffusers
WARNING LIGHTS
12V snap-in warning lights with bulb. Requires 9/32" hole.
Description
Part No.
Red lens
Green lens
Yellow lens
Blue lens
600
600
600
600
844
845
846
847
Warning Lights
37
Technical Specifications and Dimensions
38
Technical Specifications and Dimensions
39
Technical Specifications and Dimensions
40
Technical Specifications and Dimensions
41
Technical Specifications and Dimensions
42
Cross Reference (Catalog # to Mfr. #)
CAT. #
391 102
391 103
150 921
150 904
150 905
150 906
150 107
150 104
150 121
150 131
150 112
150 101
150 111
180 901
180 902
180 903
180 101
190 903
190 904
190 151B
190 104
190 105
232 011 005 003
232 011 005 004
232 011 005 005
232 011 005 011
232 011 005 012
232 011 005 014
232 011 005 015
232 011 005 017
232 011 005 020
232 011 005 024
232 011 017 005
232 011 017 039
232 011 017 041
232 011 017 088
232 011 017 131
232 011 017 136
232 011 017 139
232 011 017 145
232 011 019 003
232 011 055 019
246 068 003 001G
246 069 006 006G
600 861
600 862
240 092
600 808
600 813
600 819
600 823
600 817
600 816
600 818
600 821
240 832
240 027
240 028
240 029
240 034
240 035
240 036
240 828
240 850
240 855
180 067
180 066
600 851
600 884
340 060
340 061
MFR. #
PAGE
1 899 900 121D
36
1 899 900 138D
36
150 037 011D
9
150 037 013D
9
150 037 014D
9
150 037 016D
9
150 077 002D
13
150 077 003D
13
150 077 004D
13
150 077 005D
13
150 077 006D
13
150 077 007D
13
150 077 009D
13
180 037 011D
8
180 037 012D
8
180 037 013D
8
180 077 001D
12
190 037 004D
10
190 037 005D
10
190 075 001C
14
190 077 004D
14
190 077 005D
14
232 011 005 003
27
232 011 005 004
27
232 011 005 005
27
232 011 005 011
27
232 011 005 012
27
232 011 005 014
27
232 011 005 015
27
232 011 005 017
27
232 011 005 020
27
232 011 005 024
27
232 011 017 005
27
232 011 017 039
27
232 011 017 041
27
232 011 017 088
27
232 011 017 131
27
232 011 017 136
27
232 011 017 139
27
232 011 017 145
27
232 011 019 003
27
232 011 055 019
27
246 068 003 001G
25
246 069 006 006G
25
3 011 002 058D
37
3 011 002 065D
37
3 069 000 011D
8, 12
3 079 001 088D
37
3 079 001 428D
37
3 079 002 041D
37
3 079 002 072
37
3 079 003 035D
37
3 079 003 080D
37
3 079 003 114D
37
3 079 003 121D
37
3 085 001 012D
34
3 088 003 048D
35
3 088 003 055D
35
3 088 003 062D
35
3 088 003 079D
35
3 088 003 086D
35
3 088 003 093D
35
3 092 001 016D
34
3 092 001 391D
34
3 092 001 418D
34
3 092 001 621D
8, 12, 16
3 092 001 700D
8, 12, 16
3 092 002 017D
35
3 092 002 055D
35
3 092 003 018D
33
3 092 003 025D
33
CAT. #
340 062
340 064
340 065
226 053
600 525
391 032
600 844
600 845
600 846
600 847
600 853
600 856
600 860
600 859
600 857
600 858
600 814
240 866B
240 864
301 104
301 105
301 107
301 106
301 903
301 901
301 930B
301 904
301 902
301 015
301 303
301 302
301 301
310 105
310 106
310 107
310 151
310 909
310 915
310 907
310 911
310 934B
310 936B
310 951
310 910
310 916
310 012
310 039
310 304
331 951
332 103
332 932B
332 901
332 902
332 041
332 341
332 342
333 158
333 159
333 160
333 156
333 958
333 959
333 965
350 110
350 108
350 106
350 104
350 109
350 107
350 105
350 901
MFR. #
3 092 003 032D
3 092 003 056D
3 092 003 063D
3 096 001 182D
3 096 001 481D
3 097 003 044
3 108 001 012D
3 108 001 029D
3 108 001 036D
3 108 001 043D
3 126 002 091D
3 126 002 101D
3 126 002 156D
3 126 002 163D
3 126 002 170D
3 126 002 187D
3 130 001 046D
3 143 002 164B
3 143 002 171D
301 010 003D
301 010 004D
301 010 005D
301 010 006D
301 030 004D
301 030 005D
301 030 008C
301 040 004D
301 040 005D
301 220 001D
301 260 001D
301 260 002D
301 260 003D
310 010 006D
310 010 007D
310 010 008D
310 015 002D
310 030 006D
310 030 007D
310 030 009D
310 030 010D
310 030 023C
310 030 024C
310 035 002D
310 040 006D
310 040 007D
310 220 002D
310 220 003D
310 260 002D
331 032 002D
332 010 002D
332 030 001C
332 030 002D
332 040 002D
332 220 001D
332 260 001D
332 260 002D
333 015 018D
333 015 019D
333 015 022D
333 015 027D
333 035 019D
333 035 020D
333 035 021D
350 010 001D
350 010 002D
350 010 003D
350 010 004D
350 010 011D
350 010 012D
350 010 013D
350 030 007D
PAGE
33
33
33
32
32
36
37
37
37
37
37
37
37
37
37
37
36
35
35
13
13
13
13
9
9
9
9
9
9
17
17
17
12
12
12
12
8
8
8
8
8
8
8
8
8
8
8
16
21
14
10
10
10
10
17
17
12
12
12
12
8
8
8
13
13
13
13
13
13
13
9
CAT. #
350 909
350 913
350 934B
350 902
350 910
350 041
350 040
350 303
350 306
370 152
370 951
397 154
4 633 030 007B
437 155
600 809
600 815
600 804
600 802
600 807
600 806
600 820
600 829
600 826
600 840
600 405
600 406
600 407
600 404
999 115 015
240 025
999 115 016
150 042
150 051
150 052
150 030
150 505
150 506
150 507
150 508
150 511
150 513
150 514
150 518
150 520
150 510
150 306
150 302
180 317
180 308
437 052
437 053
437 353
301 030
301 036
600 803
N03 321 008
X10 246 001 007
X10 246 001 008
X10 246 001 009
X10 246 001 010
X10 246 001 011
X10 246 001 012
X10 246 001 013
X10 246 001 014
X10 246 001 015
X10 246 001 016
X10 246 001 017
X10 246 001 018
X10 246 001 019
MFR. #
350 030 009D
350 030 010D
350 030 021C
350 040 007D
350 040 009D
350 220 001D
350 220 002D
350 260 001D
350 260 002D
370 012 002D
370 032 002D
397 015 002C
4 633 030 007B
437 015 015D
5 635 010 013D
5 635 010 037D
5 635 020 027D
5 635 030 017D
5 635 030 024D
5 635 030 055D
5 635 030 103D
5 635 030 189
5 635 030 206D
999 067 001D
999 071 001D
999 071 002D
999 071 003D
999 072 001
999 115 015
999 115 015D
999 115 016
M 121 001 048D
M 121 003 143D
M 121 003 167D
M 121 004 144D
M 121 015 056D
M 121 015 063D
M 121 015 070D
M 121 015 087D
M 121 015 111D
M 121 015 180D
M 121 015 197D
M 121 015 245D
M 121 015 269D
M 121 015 348D
M 121 020 065D
M 121 020 089D
M 131 020 079D
M 131 020 093D
M 211 012 073D
M 211 012 176D
M 211 020 023D
M 251 006 085D
M 251 006 157D
N/A
N03 321 008
X10 246 001 007
X10 246 001 008
X10 246 001 009
X10 246 001 010
X10 246 001 011
X10 246 001 012
X10 246 001 013
X10 246 001 014
X10 246 001 015
X10 246 001 016
X10 246 001 017
X10 246 001 018
X10 246 001 019
PAGE
9
9
9
9
9
9
9
16
16
14
10
12
25
11
37
37
37
37
37
37
37
37
37
37
36
36
36
36
36
36
36
9
9
9
9
19
19
19
19
19
19
19
19
19
19
16
17
16
16
7
7
15
9
9
37
22
25
25
25
25
25
25
25
25
25
25
25
25
25
43
Be sure to check out our new products on pages 5 and 22-26.
The 230 Series Heavy-Duty
Pressure Switch
The VDO Windshield
Washer System
The BAI (Bus Analog
Interface) System
The D‘Mac System
Distributed by:
Severe Duty
VDO North America LLC
188 Brooke Road, P.O. 2897, Winchester, VA 22604
Telephone 540-665-2428 / Fax 540-722-4198 / www.vdona.com
02/2001