Invision™ MPa Plus System

Invision MPa Plus System
Issued Oct. 2011 • Index No. DC/23.6
™
MIG Welding
Power Source
with Alumination Technology
™
Quick
Specs
Heavy Industrial Applications
Processes
Railroad
Truck/Trailer Manufacturing
Light Gauge and Tube
Lawn and Garden Equipment
Recreational Vehicles
MIG (GMAW)
Pulsed MIG (GMAW-P)
Flux-Cored (FCAW)
Air Carbon Arc Cutting
and Gouging (CAC-A)
(1/4-in. carbons max.)
Input Power
352: Requires Three- or Single-Phase Power,
208 – 575 VAC, 50/60 Hz
450: Requires Three-Phase Power,
230/460 VAC, 60 Hz
Rated Output
352: 10 – 38 V, 5 – 425 A
450: 10 – 38 V, 5 – 600 A
Net Weight
352: 80 lb. (36.3 kg)
450: 122 lb. (55.3 kg)
The Power of Blue .
®
Easy to set up. Select wire
diameter, wire type and gas
being used, set your wire
speed and strike an arc.
Build your own system at
MillerWelds.com/equiptoweld
or see the Stationary and
MIGRunner Packages
(see page 8).
Alumination™ technology
allows use of extended
reach push-pull gun for
consistent, versatile and
dependable aluminum
wire feeding.
Standard Miller inverter
features (see page 2).
• Wind Tunnel Technology ™
• Fan-On-Demand ™
Synergic Pulsed MIG
“one-knob” control makes
Pulsed MIG adjustments
easy. Set the wire feed
speed control and the
system handles the rest.
MPa: M (MIG), P (Pulse),
a (Advanced Arc Control).
Advanced arc control
enables an improved pulse
welding arc. In addition,
the units provide a more
robust and stable arc
at very low arc length,
reducing heat input, and
providing the ability to
weld on a wider range of
material thickness.
Invision 450 MPa
Invision 352 MPa
Invision 352 MPa Model Only
Auto-Line™ Power Management Technology allows for any
input voltage hook-up (208 – 575 V) with no manual linking
required, providing convenience in any job setting. Ideal solution
for dirty or unreliable input power. (450 model is manual link.)
Standard built-in Pulsed MIG
programs with synergic
capability for the following
metals (see page 3).
• Steel
• Metal Core
• Aluminum
• Stainless Steel
• Nickel
• Silicon Bronze
• Copper Nickel
Dinse-style weld disconnects provide high-quality weld cable
connections. (450 model utilizes studs.)
Power source and wire feeder are warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Gun warranted for 90 days, parts and labor.
Miller Electric Mfg. Co.
Equipment Sales US and Canada
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
www.MillerWelds.com
Invision 352/450 MPa
™
Additional Features
Wind Tunnel Technology ™ protects electrical
components and PC boards from contamination.
Fan-On-Demand ™ cooling system operates
only when needed, reducing noise, energy
use and the amount of contaminants pulled
through machine.
SharpArc® changes welding arc characteristics
in Pulsed MIG (GMAW-P) welding mode. If a
gas is used other than what is listed on the
Pulsed MIG welding program chart (page 3),
the SharpArc® can be adjusted to help
customize your arc to the gas being used.
Weld Cross Section
Invision 352 provides 350 amps of welding
output at 60 percent duty cycle with superior
low-end performance. Invision 450 provides
450 amps at 100 percent duty cycle.
Dual feeder capable so you can always have
two wires ready as particular jobs change,
saving time and money with less set-up.
SharpArc
0
SharpArc
50
Lower SharpArc® settings widen the arc
cone, increase puddle fluidity and flattens the
weld bead.
Optional 115 VAC auxiliary power provides
10 amps of circuit-breaker-protected power
for water circulators, etc.
(Inv. 450 MPa is
3-Phase only.)
Voltage
Range in
CV Mode
Amperage
Range in
CC Mode
Max. OpenCircuit
Voltage
Amps Input at Rated Load Output, 60 Hz
208 V 230 V 400 V 460 V 575 V KVA KW
350 A at 34 VDC,
60% Duty Cycle
10–38 V
5–425 A
75 VDC
40.4
36.1
20.6
17.8
14.1
14.2 13.6
SinglePhase
300 A at 32 VDC,
60% Duty Cycle
10–38 V
5–425 A
75 VDC
60.8
54.6
29.7
24.5
19.9
11.7 11.2
ThreePhase
450 A at 38 VDC,
100% Duty Cycle
10–38 V
5–600 A
90 VDC
—
51
—
27.6
—
22
Rated Output
Invision
352
MPa
ThreePhase
Invision
450
MPa
Certified by Canadian Standards Association to both the Canadian and U.S. Standards.
2
Ultra-tough, polycarbonate-blended cover
for control panel protects front controls
from damage.
(Subject to change without notice.)
Input
Power
Model
Large, dual digital meters are easy to view
and are presettable to ease setting weld output.
Lightweight, aerospace-grade aluminum
case offers protection with the benefit of
reduced weight.
Line voltage compensation keeps welding
output constant even if input power varies
by +/- 10 percent. 352 models further expand
line voltage compensation on 460 VAC to an
amazing +37/-59 percent.
Specifications
Auto Remote Sense™ enables unit to
automatically use remote control if connected
to remote control receptacle.
18.9
Dimensions
Weight
H: 17 in. (432 mm)
W: 12.5 in. (318 mm)
D: 24 in. (610 mm)
80 lb.
(36.3 kg)
H: 17.25 in. (438 mm) 122 lb.
W: 14.5 in. (368 mm)
(55.3 kg)
D: 27.125 in. (689 mm)
Control Panel
The Invision™ 352 or 450 MPa model and a 74 MPa Plus single or dual wire feeder combine for a synergic
system that simplifies and improves MIG and Pulsed MIG welding applications for industrial manufacturing.
6
1
OUTPUT ON
Setup
2
3
4
7
8
9
Arc Control
Process
Wire/Gas
5
10
SETUP
Performance Data
WELDING AMPERES
3-PHASE OPERATION
The Invision MPa models have built-in Pulsed MIG programs. See the table below for the wide
range of Pulsed MIG (GMAW-P) welding applications the Invision MPa models can handle.
Wire Types
300
Steel
1-PHASE OPERATION
Gas Types
.035 STL, .045 STL
90% ARGN / 10% CO2 (Argon/Carbon Dioxide)
95% ARGN / 5% OXY (Argon/Oxygen)
.052 STL (450 model only)
1/16 STL (450 model only)
90% ARGN / 10% CO2 (Argon/Carbon Dioxide)
95% ARGN / 5% OXY (Argon/Oxygen)
Metal Core
.035 MCOR
.045 MCOR
.052 MCOR
1/16 MCOR (450 model only)
90% ARGN / 10% CO2 (Argon/Carbon Dioxide)
Stainless Steel
.035 SSTL, .045 SSTL
TRI MIX (Tri-gas mixture:
81% ARGN / 18% HE / 1% CO2
[Argon/Helium/Carbon Dioxide])
98% ARGN / 2% OXY (Argon/Oxygen)
98% ARGN / 2% CO2 (Argon/Carbon Dioxide)
Aluminum
.035 AL4X (4000 Series)
.040 AL4X (4000 Series)
3/64 AL4X (4000 Series)
1/16 AL4X (4000 Series)
100% ARGN (Argon)
.035 AL5X (5000 Series)
.040 AL5X (5000 Series)
3/64 AL5X (5000 Series)
1/16 AL5X (5000 Series)
100% ARGN (Argon)
75% HE / 25% ARGN (Helium/Argon)
Nickel
.035 NI, .045 NI
75% ARGN / 25% HE (Argon/Helium)
Silicon Bronze
.035 SIBR
100% ARGN (Argon)
Copper Nickel
.045 CUNI
75% HE / 25% ARGN (Helium/Argon)
250
6 AWG POWER CORD
200
8 AWG POWER CORD
150
100
10
15
20
25
30
40
50
60 70 80 90 100
% DUTY CYCLE
INVISION 450 MPa DUTY CYCLE CHART
700
600
56%
3-PHASE OPERATION
WELDING AMPERES
500
400
300
200
150
100
10
15
20
25
30
Output ON Indicator Light
Left Display
Voltage Indicator
Arc Length Indicator
Wire Feeder Receptacle
Adjustment Control
Right Display
Setup Indicator
Amperage Indicator
Setup Indicator Lights
• Arc Control Indicator
• Process Indicator
• Wire/Gas Type Indicator
• Setup Button
Built-In Pulsed MIG Programs
INVISION 352 MPa DUTY CYCLE CHART
500
425
400
350
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
40
% DUTY CYCLE
50
60 70 80 90 100
3
74 MPa Plus Wire Feeder Features
S-74 MPa Plus Single Wire Feeder
Control Panel
D-74 MPa Plus Dual Wire Feeder
1
6
2
7
3
8
4
9
5
10
Trigger schedule select allows the operator to select the alternative
schedule by quickly tapping the gun trigger when not welding.
When optimized with the Invision 352 MPa or 450 MPa the
operator can also switch from MIG to Pulsed MIG.
RO17
RO21
RO16
11
JOG
PURGE
Trigger hold reduces fatigue by allowing the operator to weld
without holding the trigger.
D-74 MPa Plus Dual Wire Feeder Control Panel Shown
Program locks allow you to maintain proper weld parameters.
™
Profile Pulse gives you the cosmetic bead appearance for the
welds you want to show off.
Dual-wire models allow you to set up one side for soft wires
(aluminum) while maintaining the ability to push a variety
of hard wires on the other, saving time and money.
Specifications
Input
Power
24 VAC,
10 A,
50/60 Hz
1.
2.
3.
4.
5.
6.
Left Dual Schedule Indicator
Voltage/Arc Length Display Meter
Left Adjust Knob
Setup Button
Start Button
Right Dual Schedule Indicator
7. Amperage/Wire Speed
Display Meter
8. Right Adjust Knob
9. Left/Right Select Button
10. Crater Button
11. Jog/Purge
(Use with CV, DC
Power Sources.)
(Subject to change without notice.)
Electrode Wire Diameter Capacity
Wire Speed
.035–5/64 in. (0.9 – 2.0 mm)
.035–1/16 in. (0.9 –1.6 mm) Aluminum
Wire kit #230 708 required to run
1/16-in. (1.6 mm) wire
50 –780 IPM
(1.3 –19.8 m/min.)
Drive Roll Kits and Guides
Dimensions
S-74 MPa Plus
(Single Feeder)
D-74 MPa Plus
(Dual Feeder)
H: 14 in. (356 mm)
W: 12 in. (305 mm)
D: 28 in. (711 mm)
H: 14 in. (356 mm)
W: 21 in. (533 mm)
D: 35 in. (889 mm)
Net Weight
S-74 MPa Plus
(Single Feeder)
D-74 MPa Plus
(Dual Feeder)
58 lb. (26 kg)
87 lb. (35.5 kg)
(Order from Miller Service Parts.)
Select drive roll kits from chart below according to type and wire size being used. Drive roll kits include 4 drive rolls, the necessary guides and feature an anti-wear sleeve for inlet guide.
“V” groove
for hard wire
Wire Size
.035 in. (0.9 mm)
#151 026
.040 in. (1.0 mm)
#161 190
.045 in. (1.1/1.2 mm)
#151 027
.052 in. (1.3/1.4 mm)
#151 028
1/16 in. (1.6 mm)
#151 029
.068/.072 in. (1.8 mm)
—
5/64 in. (2.0 mm)
—
“U” groove for
soft wire or
soft-shelled
cored wires
—
—
#151 037*
#151 038
#151 039
—
#151 040
“V” knurled for
hard-shelled
cored wires
“U” cogged
for extremely soft
wire or soft-shelled
cored wires (i.e.,
hard facing types)
#151 052
—
#151 053
#151 054
#151 055
#151 056
#151 057
—
—
#151 070
#151 071
#151 072
—
#151 073
“U” groove for
aluminum
wires contains
nylon guides
#243 233
—
#243 234*
—
#243 235
—
—
*Accommodates .045 and .047 (3/64 in) wire.
Nylon Wire Guides for Feeding Aluminum Wire
Wire Size
.035 in. (0.9 mm)
.047 in. (1.2 mm)
1/16 in. (1.6 mm)
Inlet Guide
#221 912
#221 912
#221 912
Intermediate Guide
#242 417
#205 936
#205 937
Note: “U” groove drive rolls are recommended when feeding aluminum wire.
4
Wire Guides
Wire Size
.023 – .040 in. (0.6 – 1.0 mm)
.045 – .052 in. (1.1 – 1.4 mm)
1/16 – 5/64 in. (1.6 – 2 mm)
Inlet Guide
#221 030
#221 030
#221 030
Intermediate Guide
#149 518
#149 519
#149 520
Power Source Compatibility for MPa Plus Wire Feeders
Power Source
Pulse Capable
Invision™ 352 and 450 MPa
Yes
XMT® 350 and 450 MPa
Yes
AlumaPower™ 350 and 450 MPa Yes (Aluminum only)
XMT® 350 and 450 CC/CV
Yes (with Optima)
XMT® 304 CC/CV
Yes (with Optima)
Invision™ 456P
Yes (with Optima)
Invision™ 456MP
Yes
Invision™ 354P
Yes (with Optima)
Invision™ 354MP
Yes
Deltaweld® (after KF790532)
No
No
Dimension™ (after KE614131)
Synergic
Pulsed MIG
Yes
Yes
Yes (Aluminum only)
No
No
No
No
No
No
No
No
Dual Pulse Wire
Capable
Yes
Yes
No
No
No
No
No
No
No
No
No
System Communication
Enhanced Arc Control
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Electronic Inductance/
SharpArc
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Compatibility
Optimized
Best
Best
Better
Better
Better
Better
Better
Better
Good
Good
Note: Power sources not included in this list are not recommended. For specific information, please contact your local Miller distributor.
XR-Aluma-Pro Plus Gun Features
™
Easy-to-rotate self-seating head tube allows
for better access into tight spots, preventing
leaks and providing excellent current transfer.
Isolated common, knurled drive roll helps
reduce wear, reducing down time and cost.
Serviceability. This gun features a full-length
Velcro-seamed leather jacket with integrated
strain reliefs for easy cable maintenance and
protection. The gun also features quick connectors between the control cable and electrical
components (trigger, motor, potentiometer).
Replaceable feed cable liner is designed to
provide consistent arc performance. It also
reduces parts cost and service time by allowing
a simple means of removing and replacing
liner and not the complete feed cable.
Note: XR-Aluma-Pro Plus
guns are only compatible
with MPa Plus feeders.
Specifications
Aluminum-series-specific tension setting
ensures smooth wire-feeding performance
with 4000 or 5000 series aluminum wires.
(Subject to change without notice.)
Welding Output Range with
100% Argon and Peak Amperages
Electrode Wire Diameter Capacity
Wire Speed
Dimensions
XR-Aluma-Pro Plus
Air-Cooled Gun
300 A at 100% Duty Cycle
with 15-, 25-, or 35-ft.
(4.6, 7.6, or 10.6 m) gun
.030–1/16 in. (0.8–1.6 mm) Aluminum
Wire kit #230 708 required to run
1/16-in. (1.6 mm) wire
50–780 IPM
(1.3–19.8 m/min.)
dependent on
feeder used.
H: 5 in. (127 mm)
W: 2.5 in. (64 mm)
D: 17 in. (432 mm)
2.5 lb.
(1.1 kg)
XR-Aluma-Pro Plus
Water-Cooled Gun
400 A at 100% Duty Cycle
with 15-, 25-, or 35-ft.
(4.6, 7.6, or 10.6 m) gun
.030–1/16 in. (0.8–1.6 mm) Aluminum
Wire kit #230 708 required to run
1/16-in. (1.6 mm) wire
50–780 IPM
(1.3–19.8 m/min.)
H: 5 in. (127 mm)
W: 2.5 in. (64 mm)
D: 17 in. (432 mm)
2.9 lb.
(1.3 kg)
Model
Certified by Canadian Standards Association to both the Canadian and U.S. Standards.
Standard Consumables
2-pc (N-3414 − N-HDC)
Conforms to European standards.
(Order from Miller Service Parts.)
Insulators
Centerfire Nozzles
N– 5818C
Net Weight
(Torch only)
Centerfire
Contact Tips
Centerfire
Diffusers
T-035AL
T-047AL
T-062AL
D-1AP
Note: Many other Centerfire™ options are available.
Visit BernardWelds.com for more information.
Inner Rear
(#227 416)
XR-Aluma-Pro Plus
6-inch Head Tube
Air (Long)
(#245 979)
Outer Air Long
(#229 673)
Outer Water Long
(#230 420)
Water
(#245 981)
5
Genuine Miller Accessories
®
Wire Feeders/Guns
D-74 MPa Plus
feeder shown
70 Series Wire Feeders
S-74 MPa Plus #951 291 Single feeder
D-74 MPa Plus #951 292 Dual feeder
Order XR-Aluma-Pro Plus gun and U-groove drive
rolls separately to match your aluminum needs.
Above models are optimized for Invision 352 MPa and
450 MPa, with push-pull capability.
S-74S
#951 196 Single feeder
S-74D
#951 198 Single feeder
S-74DX
#951 200 Single feeder
D-74S
#951 203 Dual feeder
D-74D
#951 204 Dual feeder
D-74DX
#951 206 Dual feeder
70 Series feeders feature Posifeed™ wire
drive assembly and handle a variety of
wires. Each includes 15-foot Bernard®
Q400 gun and set of .035/.045-inch V-groove
drive rolls. See Lit. Index No. M/3.0.
Extension Cables*
#247 831 025 25 ft. (7.6 m)
#247 831 050 50 ft. (15.2 m)
#247 831 080 80 ft. (24.4 m)
Eleven conductors to support contactor
control and remote voltage control on all
Miller electronic CV 14-pin power sources.
Additional functions supported when
using the Invision 352 MPa or 450 MPa
power source include Synergic Pulsed
MIG, and remote process select and side
select capabilities.
*Custom lengths available in 5-foot increments up to
50 feet and 10-foot increments up to 100 feet.
A variety of MIG guns are also available.
Visit MillerWelds.com/equiptoweld for
more information.
6
XR-Aluma-Pro™ Plus Guns
#300 000 001 15 ft. (4.6 m), air-cooled
#300 001 001 25 ft. (7.6 m), air-cooled
#300 264 001 35 ft. (10.6 m), air-cooled
#300 003 001 15 ft. (4.6 m), water-cooled
#300 004 001 25 ft. (7.6 m), water-cooled
#300 265 001 35 ft. (10.6 m), water-cooled
Above gun models are specific to the 74 MPa Plus
wire feeders.
Spool Covers
#057 607 For single
feeders or left side of
dual feeders
#090 389 For right side
of dual feeders
For 12-inch (305 mm) spool.
Note: Spool Cover cannot be installed if the wire drive
assembly is in a rotated position.
Wire Reel Assembly
#108 008
For 60-pound (27 kg) coil
of wire.
This easy-to-use and easy-to-maintain
gooseneck-style MIG gun is designed for
push-pull wire feed systems. Available in
air- or water-cooled versions. Trigger hold
reduces operator fatigue. Gun design
allows for better access into tight spots.
1/16-inch (1.6 mm) Wire Kit #230 708
Specially designed for 1/16-inch wire.
Includes idler roll, head tube liner and
inlet guide. Required when running
1/16-inch wires. Not included with standard
XR-Aluma-Pro Plus gun.
Hardwire Liner Kit for Steel and Stainless
#198 377 For 15-, 25-, or 35-foot
(4.6, 7.6 or 10.6 m) guns
Kit consists of gun head tube liner and
feed cable liner. Recommend using
.030–.045 inch mild steel or stainless steel
electrode wire (.052- and 1/16-inch wire
not recommended).
Phosphorous Bronze Liner (Optional)
#233 999 Long Head Tube (air or water)
#233 998 Short Head Tube (air only)
Steel Liner (Optional)
#242 191 Short Head Tube (air only)
Industrial MIG 4/0 Kit with Dinse
Connectors #300 405
For Invision 352 MPa power source.
Includes Smith® flowmeter/regulator with
10-foot (3 m) gas hose, 10-foot (3 m) 4/0
feeder weld cable with Dinse connector on
one end and a lug on the other, 15-foot
(4.6 m) work cable with Dinse connector on
one end and 600 A C-clamp on the other.
Industrial MIG 4/0 Kit #300 390
For Invision 450 MPa power source.
Includes the same as the kit above, except
weld and work cables have lugs instead of
Dinse connectors.
Protective Cover
#195 478
For Invision
352 MPa power
source. Mildew and
water resistant,
odor-free cover
protects your
machine’s finish.
Genuine Miller Accessories
®
Running Gear
MIGRunner ™ Cart #195 445
Small footprint and easily maneuverable,
with cylinder rack low enough that you do
not have to lift bottles.
(continued)
Coolant Systems
Cable Connectors and Adapters
For more information, see the Miller Coolant
Systems literature sheet, Index No. AY/7.2.
Note: Invision 352 MPa power sources are equipped
with Dinse-style connectors for secondary connections.
Coolmate™ 3 #043 007 115 VAC
For use with water-cooled torches rated
up to 600 amps. Unique paddle-wheel
indicator, external filter and easy-fill spout.
Coolmate™ V3
#043 009 115 VAC
For use with watercooled torches rated
up to 500 amps.
Vertical design
conveniently mounts
to Miller cylinder
rack in place of one
cylinder.
Running Gear Cylinder Rack #300 408
Holds two large gas cylinders and has gun
cable hangers and a consumable drawer in
front for easy access. A convenient handle
allows the cart to be pulled easily through
doorways. System components including
power source, single or dual feeders, and
Coolmate™ V3 can be mounted to the cart
and secured.
Universal Carrying Cart and Cylinder Rack
#042 934
Holds power source, and gas cylinder up
to 56 inches (142.2 cm) high measuring
6 to 9 inches (15.2 to 22.8 cm) in diameter.
Dinse-Style Connector Kit
#042 418
Accepts #4 to #1/0 AWG cable size.
#042 533
Accepts #1/0 to #2/0 AWG cable size.
Required if male plugs shipped with power
source must be replaced or if additional
plugs are needed. Kit includes one Dinsestyle male plug which attaches to the work
and/or weld cables and plugs into the
Dinse-style receptacles on the power source.
Extension Kit for Dinse-Style
Cable Connectors
#042 419
Accepts #4 to #1/0 AWG cable size.
#042 534
Accepts #1/0 to #2/0 AWG cable size.
Used to adapt or extend weld and/or work
cables. Kit includes one male Dinse-style plug
and one in-line female Dinse-style receptacle.
Dinse/Tweco® Adapter
#042 465
Dinse/Cam-Lok Adapter
#042 466
One-piece adapter with Dinse-style male
plug (to power source) on one end and
female receptacle (Tweco or Cam-Lok for
weld cable connection) on other end.
Coolmate™ 3.5 #300 245 115 VAC
Industrial, 3.5-gallon cooler designed for
water-cooled torches rated up to 600 A.
Coolant #043 809
Sold in cases of four one-gallon recyclable
plastic bottles. Miller coolants contain a
base of ethylene glycol and deionized water
to protect against freezing to -37 degrees
Fahrenheit (-38° C) or boiling to 227 degrees
Fahrenheit (108° C). Also contains a
compound that resists algae growth.
7
Ordering Information
Power Source and Options
Stock No.
Description
Invision™ 352 MPa
#907 431
#907 431 001
Power source only. 208 – 575 VAC with Auto-Line™
Power source only. 208 – 575 VAC with Auto-Line™ and Auxiliary Power
Invision™ 352 MPa Plus
Air-Cooled Stationary Packages
#951 283
Power source, single MPa feeder, 25-ft. XR-Aluma-Pro™ Plus gun, .035/.047-in. U-groove
drive rolls, 15-ft. Bernard™ Q400 gun, .035/.045-in. V-groove drive rolls, and
Industrial MIG 4/0 Kit with Dinse connectors
Power source, dual MPa feeder, 25-ft. XR-Aluma-Pro™ Plus gun, .035/.047-in. U-groove
drive rolls, two 15-ft. Bernard™ Q400 guns, .035/.045-in. V-groove drive rolls, and
Industrial MIG 4/0 Kit with Dinse connectors
#951 285
Qty.
Invision™ 352 MPa Plus
Air-Cooled MIGRunner™ Packages
#951 287
#951 289
Same as single-feeder, air-cooled Stationary Package above plus MIGRunner Cart
Same as dual-feeder, air-cooled Stationary Package above plus Running Gear Cylinder Rack
Invision™ 352 MPa Plus (Push Only)
Air-Cooled MIGRunner Packages
(NO Aluma-Pro gun)
#951 411
Power source, single MPa feeder, 15-ft. Bernard™ Q400 gun, .035/.045-in. V-groove
drive rolls, Industrial MIG 4/0 Kit with Dinse connectors, plus MIGRunner Cart
Power source, dual MPa feeder, two 15-ft. Bernard™ Q400 guns, .035/.045-in. V-groove
drive rolls, Industrial MIG 4/0 Kit with Dinse connectors, plus Running Gear Cylinder Rack
Invision™ 352 MPa Plus
Water-Cooled Stationary Packages
#951 377
#951 417
#951 378
Power source with aux power, single MPa feeder, 25-ft. XR-Aluma-Pro™ Plus gun,
.035/.047-in. U-groove drive rolls, 15-ft. Bernard™ Q400 gun, .035/.045-in. V-groove
drive rolls, Industrial MIG 4/0 Kit with Dinse connectors, Coolmate™ 3, and coolant
Power source with aux power, dual MPa feeder, 25-ft. XR-Aluma-Pro™ Plus gun,
.035/.047-in. U-groove drive rolls, two 15-ft. Bernard™ Q400 guns, .035/.045-in. V-groove
drive rolls, Industrial MIG 4/0 Kit with Dinse connectors, Coolmate™ 3, and coolant
Invision™ 352 MPa Plus
Water-Cooled MIGRunner™ Packages
#951 379
#951 380
Same as single-feeder, water-cooled Stationary Package above plus MIGRunner Cart
Same as dual-feeder, water-cooled Stationary Package above plus Running Gear Cylinder Rack
Invision™ 450 MPa
#907 485
Power source only. 230/460 VAC with Auxiliary Power
Wire Feeders/Guns
70 Series Wire Feeders
See page 6
Extension Cables
See page 6
XR-Aluma-Pro™ Plus Guns
See page 6
Spool Covers
#057 607
#090 389
12-inch (305 mm) spool for single feeders or left side of dual feeders
12-inch (305 mm) spool for right side of dual feeders
Wire Reel Assembly
#108 008
For 60-pound (27 kg) coil
Industrial MIG 4/0 Kit
#300 405
#300 390
With Dinse connectors for Invision™ 352. See page 6
With lugs for Invision™ 450. See page 6
Protective Cover
#195 478
For Invision™ 352
MIGRunner™ Cart
#195 445
For single feeders
Running Gear Cylinder Rack
#300 408
For dual feeders
Universal Cart/Cylinder Rack
#042 934
Accessories
Running Gear
Coolant Systems
See page 7. See Lit. Index No. AY/7.2
Cable Connectors and Adapters
See page 7
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Price