PYLE Audio PLDVD130 Owner`s manual

PLDVD130
OWNER’S MANUAL
Mobile Video System
• Multi-subtitle Languages Function
• Multi-audio Languages Function
• Multi-angle Function
• Parental Control
Use Authorized Service Centres
Do not attempt to disassemble or adjust
this precision product. Please refer to
the Service Centre list included with this
product for service assistance.
FEATURES
Compatible with PAL DVD (Video
CD) and NTSC DVD (Video CD)
This player can play discs recorded in
either PAL or NTSC format.
For Installation
The unit should be installed in a
horizontal position with the front end up
at a convenient angle, but not more than
30°.
• A single LSI chip now integrates all
major DVD playback circuit functions
including MPEG2 decoder, video D/A
converter, and audio decoders.
• L/R stereo analog audio outputs for
connection to existing head unit aux
inputs. Video output is composite
video.
• Supplied remote handles
multi-function software (multi-language
audio-track/subtitle, multi-angle, multistory, etc.), plus all basic functions.
USE THIS PRODUCT SAFELY
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
When Car Washing
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce
very high temperatures inside your
vehicle. Give the interior a chance to
cool down before starting playback.
Use the Proper Power Supply
This product is designed to operate with
a 12 volt DC, negative ground battery
system (the regular system in a North
American car).
Protect the Disc Mechanism
Avoid inserting any foreign objects into
the slot of this player.
Failure to observe this may cause
malfunction due to the precise
mechanism of this unit.
2
CONTENTS
Safety Information ........................................................................................4
Disc Notes .....................................................................................................5
Installation .....................................................................................................6
Electric Connection ......................................................................................7
Remote Control.............................................................................................8
Preparing the Remote Control ................................................................................9
Loading a DVD/VCD/CD Disc.................................................................................9
Ejecting a Disc ........................................................................................................9
Location and Function of Keys...............................................................................9
Basic Operation ..........................................................................................10
On-Screen Display Function.................................................................................11
Multi-audio Language Function............................................................................12
Menu Function (For DVD only)..............................................................................13
Title Menu Function (For DVD only) ......................................................................13
Multi-subtitle Language Function (For DVD only).................................................13
Multi-angle Function (For DVD only).....................................................................13
MP3 Disc Play.......................................................................................................13
Setup ............................................................................................................14
Initial Setup ...........................................................................................................14
General Setup .......................................................................................................14
Speaker Setup ......................................................................................................16
Audio Setup ..........................................................................................................16
Preferences Setup ................................................................................................17
Defaults Table .......................................................................................................19
Specifications..............................................................................................20
3
SAFETY INFORMATION
CAUTION:
MOBILE DVD PLAYER IS A CLASS I
LASER PRODUCT. HOWEVER THIS
MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
Region Management Information
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.
WARNING:
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
• THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
4
DISC NOTES
Disc formats supported by this player
Note these scratches are not an
indication of any problem with the player.
DVD
12 cm disc
(Single-sided disc only)
Label side up
Video CD
12 cm disc
CD
12 cm disc
Do not touch
the underside
of the disc
MP3
12 cm disc
Do not bend
Discs which cannot be played with this
player
• DVD-ROM
• DVD-R/DVD-RAM
• CDV
• CD-G
Wipe the disc from center
toward the outside edge
Handling and Cleaning
• Dirt, dust, scratches and warping disc
will cause misoperation.
• Do not place stickers or make
scratches on discs.
• Do not warp discs.
• A disc should always be kept in its
case when not in use to prevent from
damaging.
• Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
Rough spots on
outside edge
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Ball point pen
or pencil
Rough spots
on inside edge
5
INSTALLATION
SCREW
M5x25
SCREWS LOCKED THE UNIT CORE
SCREW
M4x5
SCREW
M4x5
3
1
3
2
1
4
2
Note:
1. First remove the two screws that locket the unit core, then attach the brackets on
both sides of unit with screws (M4x5), last install the unit with screws (M5x25).
2. When fix the unit, you can slide the screw (M5x25) to left side or right side to meet
your needed position. In the figure above, select two holes among the positions
that marked 1, 2, 3 and 4 to fix the bracket.
6
ELECTRIC CONNECTION
DVD PLAYER
DC 12V IN DC 12V OUT
REMOTE
A/V OUT
DIGITAL
AUDIO L/R VIDEO
YELLOW
VIDEO OUT
RED
AUDIO R OUT
AC/DC
ADAPTOR
WHITE
AUDIO L OUT
(OPTIONAL)
(OPTIONAL)
REMOTE CONTROL RECEIVER
CIGARETTE LIGHTER
7
DIGITAL AUDIO
REMOTE CONTROL
1
10
2
3
11
12
4
13
6
14
5
15
7
16
8
17
9
1.
2.
3.
4.
5.
6.
POWER
0-9
GOTO
7.
SUBTITLE
8.
9.
10.
11.
12.
SETUP
TITLE
DISPLAY
REPEAT
/
/
13. SLOW
14. ENTER
15. AUDIO
16. ANGLE
17. MENU
Press POWER to turn the unit ON or OFF
Numeric buttons
Disc search button, cooperatively used with numeric buttons
Press it to stop playback
Press
to start forward rapidly &
to reverse rapidly
Press to skip to the next track & press to skip back one track
In case of MENU mode, those buttons served as cursor buttons
Changing of the SUBTITLE language on multi-subtitle language
DVD disc
Display the SETUP menu
Display the TITLE menu that is stored in DVD disc
Display statistical disc information during playback
Switch the Repeat mode of DVD/VCD/CD disc
Press once to pause a play, press again to resume continuous
playback
Changing for slow forward/reverse playback motion
Confirm the Track/Chapter selected with the number key or
selected with the cursor buttons on TV screen
Changing of the AUDIO soundtrack on multi-audio soundtrack
DVD disc. Changing of the sound mode of the VCD/CD disc
Changing of the view angle on multi-angle DVD disc
Display the root menu that is stored on the DVD disc
Changing between PBC ON and PBC OFF on the VCD disc
8
REMOTE CONTROL
Preparing the Remote Control
Location and Function Of Keys
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
indicated.
3. Close the cover
Battery: Two AAA size battery.
1
Using the Remote Control
Face the remote control towards the
player front face IR mark (remote control
signal reciver).
Operation angle: About ± 30 degree in
each the direction of the front of the IR
mark.
1.
2.
3.
4.
To prevent damage to the unit, be sure
to follow the connection diagram
(page 7).
Loading a DVD/VCD/CD Disc
1. Turn the ignition on the the accessory
position.
2. Press the button (1) on the front
panel or (POWER) on the remote
control.
3. Insert the disc with printed side facing
up into the disc slot (2).
4. The player starts playback
automatically.
Ejecting a Disc
Press
button (3) to eject the disc.
9
3
Disc Slot
4
2
8
5.
6.
7.
8.
5
6
IR
7
BASIC OPERATION
Stopping Play
- Brief press the (Stop) button to stop
the unit playback, when press the
button on the front panel or
button
on the remote control, it can continuous
normal playback.
- Press (Stop) button twice, it will stop
the playback and go back to initial
Track/Chapter.
Pause (still picture)
Pressing the
button on the front
panel or
button on the remote control
during playback will stop play temporary.
Return to normal playback, press the
button on the front panel or
button on the remote control once again.
Repeat
Press the REPEAT button to select repeat
mode as follow.
Rapid Forward/Rapid Reverse
Press
FF &
REW during play.
Each time the button is pressed, the
speed of rapid forward/reverse changes
according to the disc as follow.
DVD:
Press the REPEAT button to select repeat
mode as follow.
DVD:
CHAPTER REPEAT ON
Normal Playback
2X
4X
6X
8X
VCD/CD:
Press the REPEAT button to select repeat
mode as follow.
VCD/CD:
Normal Playback
1X
2X
3X
TITLE REPEAT ON
REPEAT OFF
4X
REP-ONE
REP-ALL
REPEAT OFF
MP3:
Normal Playback
1. Continuously repeat at the current chapter/
track, when selected REP-ONE mode.
2. Select REP-ALL mode to continuously
repeat all chapter/track on the current
disc.
3. When the player finish playback the
current discc last chapter/track, it will
stop display the elapsed time. When
selected REPEAT OFF mode (REPONE & REP-ALL disappear at the
screen display).
4. REPEAT feature does not support
VCD2.0 (with PBC ON).
2X
Press ENTER Button
Skipping Track
Press SKIP / on the remote handset
or
/
buttons on the front panel
during playback. Press or
to skip
to next track, and or
to back one
track. Note: For some VCD 2.0 dics
(PBC-playback control), / and
/
buttons may be unavailable.
Slow Motion Play
Press SLOW button during playback.
Each time the button is pressed, the slow
mode changes according to the disc as follow.
DVD:
Normal Playback
SF 2X
SR 8X
SF 4X
SR 4X
SF 8X
SR 2X
VCD:
Normal Playback
SF 1X
Step BWD
SF 2X
SF 3X
Note: For VCD, in any slow mode, press
ENTER button to return to normal playback.
10
BASIC OPERATION
Disc Search (GOTO)
FOR DVD
Press GOTO button twice, the screen will
display the following message:
On-Screen Display Function
Press the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example:
TITLE 01/01 TIME -- : -- : --
DVD:
00:00:25
(1) Press DISPLAY for the first time:
You can select the item you want to
watch through TIME setting by using
numeric buttons and ENTER key.
TITLE 01/03 CHAPTER 002/025
00:02:25
FOR VCD (WITH PBC OFF)/CD:
Press GOTO button once, the screen will
display the following message:
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
GOTO -- : -00:00:25
(2) Press DISPLAY for the second time:
Use numeric buttons to input the time
directly.
TITLE REMAIN
01:46:58
Remote Sensor (IR)
Point the remote handset to the remote sensor.
Receive the signal from remote handset.
(3) Press DISPLAY for the third time:
Turning the player on/off
Press the button on front of panel or
press (POWER) button on remote
control to turn the player on or off.
CHAPTER ELAPSED
00:00:24
(4) Press DISPLAY for the fourth time:
CHAPTER REMAIN
00:01:39
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
VCD:
(1) Press DISPLAY for the first time:
SINGLE ELAPSED
00:00:25
11
BASIC OPERATION
(2) Press DISPLAY for the second time:
(4) Press DISPLAY for the fourth time:
TOTAL REMAIN
00:40:35
SINGLE REMAIN
00:03:15
TOTAL TRACK : 14
TRACK : - 01
(3) Press DISPLAY for the third time:
(5) Press DISPLAY for the fifth time:
TOTAL ELAPSED
The message on the screen will be cleared.
00:00:25
MP3 (When set to NO MENU in SMART
NAV item):
(1) Press DISPLAY for the first time:
(4) Press DISPLAY for the fourth time:
CHAPTER ELASPED 00:00:25
TOTAL REMAIN
00:40:35
TOTAL TRACK : 123
TRACK : - 01
(2) Press DISPLAY for the second time:.
(5) Press DISPLAY for the fifth time:
CHAPTER REMAIN
The message on the screen will be cleared.
CD:
(1)Press DISPLAY for the first time:
00:04:25
TOTAL TRACK : 123
TRACK : - 01
SINGLE ELASPED
00:00:25
(3) Press DISPLAY for the third time:
TOTAL TRACK : 14
TRACK : - 01
The message on the screen will be cleared.
Multi-audio Language Function
(2)Press DISPLAY for the second time:
For DVD:
Press AUDIO during playback.
Each time the button is pressed, number
of the audio soundtrack language
changes on sequential order.
Notes:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack.
- When no different language
soundtrack are recorded will be
displayed at screen left top corner.
SINGLE REMAIN
00:03:15
TOTAL TRACK : 14
TRACK : - 01
(3)Press DISPLAY for the third time:
TOTAL ELASPED
00:00:25
TOTAL TRACK : 14
TRACK : - 01
For VCD/CD:
Press AUDIO during playback.
It is possible to switch the sound
between monaural and stereo sound.
12
BASIC OPERATION
MONO LEFT
MONO RIGHT
STEREO
MP3 Disc Play
MP3 disc is playing as the format of
FOLDER.
For example:
MENU Function (For DVD Only)
Press MENU button while the disc is
playing and the disc menu will be
displayed. You can navigate with the
remote control navigation keys and
select a feature with the ENTER key.
SMART NAVI
ROOT
TITLE Menu Function
(For DVD only)
ROOT
0
MP3 MUSIC
1
SKY
If the DVD has multiple titles recorded on
the disc. It can select preferred title from
the title menu to start playback.
- Press TITLE during playback.
The title menu is display.
- Press the cursor button shown in TV
screen, select preferred title by the
cursor button and confirmed by
ENTER key.
MP3 HEAR YOUR
PLAY MODE
DISC
Use / ,
/
to select the item or
folder, then press ENTER button.
Pressing REPEAT button repeatedly can
select three kinds of repeat play mode.
REP-ONE:
Play the same song over and over
again.
FOLDER REPEAT:
Play all songs in the current directory
in sequence, over and over again.
FOLDER:
Play all songs in the current directory
once.
When select PLAY MODE, press / to
change between the following mode:
Multi-subtitle Language Function
(For DVD only)
Press SUBTITLE during playback.
Each time the button is pressed, number
of the subtitle language changes in
sequential order.
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
- When no different subtitle language
are recorded, will be displayed at
screen left top corner.
SINGLE
REP-ONE
DISC SCAN
SHUFFLE ON
Multi-angle Function
(For DVD only)
DISC
FOLDER
FOLDER REP
DISC REP
RANDOM
PROGRAM PXXX
In the playback, use or to skip an
item ahead or back.
: Rapid reverse,
: Rapid advance
Note: The FOLDER cannot be selected
during playing. It can be selected after
(Stop) button pressed.
Press ANGLE during playback.
Each time the button is pressed, number
of the angle changes in sequential order.
Notes:
- The angle number is different
according to the disc.
- The function only works for discs
having scenes recorded at different
angles.
- When no different angle are recorded,
will be displayed at screen left top
corner.
13
SETUP
INITIAL SETUP
GENERAL SETUP
SETUP MENU --- MAIN PAGE
--- GENERAL PAGE ---
GENERAL SETUP
TV DISPLAY
NORMAL/PS
SPEAKER SETUP
PIC MODE
NORMAL/LB
AUDIO SETUP
ANGLE MARK
WIDE
PREFERENCES
OSD LANG
CAPTIONS
SCR SAVER
EXIT SETUP
1. Press SETUP in the stop mode.
(Press the stop button twice to ensure
the player under STOP mode.)
MAIN PAGE
TV Screen
2. The initial SETUP menu is displayed.
4:3
Video Material
Normal
3. Select the preferred item by using the
/ buttons.
Pan Scan
Wide (16:9)
Letter-box
4:3
16:9
4. Press ENTER buttons.
a. GENERAL SETUP
This setup page includes all the
item of TV display & audio output
feature. The detail please refer to
GENERAL SETUP MENU.
TV display setup
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
b. SPEAKER SETUP
This is to activate the audio output
from DOLBY AC3 5.1 DOWNMIX
to 2 channel mode. Please refer to
SPEAKER SETUP MENU.
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the left
and right edges are cut off.)
Normal/LB (For 4:3 TV)
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
c. AUDIO SETUP
This setup page includes all the
items for AUDIO. Please refer to
AUDIO SETUP MENU.
d. PREFERENCE SETUP
This setup page includes all the
configuration of support feature.
The detail please refer to
PREFERENCES SETUP MENU.
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
14
SETUP
--- GENERAL PAGE ---
--- GENERAL PAGE --TV DISPLAY
TV DISPLAY
PIC MODE
AUTO
PIC MODE
ANGLE MARK
HI-RES
ANGLE MARK
OSD LANG
N-FLICKER
OSD LANG
CAPTIONS
CAPTIONS
SCR SAVER
SCR SAVER
MAIN PAGE
MAIN PAGE
ENGLISH
OSD LANG type setup
Select the preferred OSD language by
using the / buttons.
PIC mode setup
Select AUTO, the player PIC mode will
depend on DVD disc.
Select HI-RES format for best image
resolution.
Select N-FLICKER format on image or
picture under noise affect.
--- GENERAL PAGE ---
--- GENERAL PAGE ---
TV DISPLAY
TV DISPLAY
PIC MODE
PIC MODE
ANGLE MARK
ON
ANGLE MARK
OSD LANG
OFF
OSD LANG
CAPTIONS
CAPTIONS
ON
SCR SAVER
SCR SAVER
OFF
MAIN PAGE
MAIN PAGE
ANGLE MARK display setup
If it is set to ON, when the multi-angle
DVD disc is playing, (the angle mark)
will appears on the screen; if is set to
OFF, the mark will not appear.
CAPTIONS setup
Activate the CAPTIONS feature by
selecting ON. And release this feature
by selecting OFF.
15
SETUP
--- GENERAL PAGE ---
AUDIO SETUP
--- AUDIO SETUP ---
TV DISPLAY
PIC MODE
AUDIO OUT
ANALOG
OP MODE
SPDIF/RAW
DYNAMIC
SPDIF/PCM
ANGLE MARK
OSD LANG
CAPTIONS
LPCM OUTPUT
SCR SAVER
ON
OFF
MAIN PAGE
SCR SAVER setup
Select the SCR SAVER output ON/OFF.
MAIN PAGE
AUDIO OUT
This is to activate the audio output from
ANALOG mode to SPDIF/RAW mode to
SPDIF/PCM mode.
SPEAKER SETUP
--- SPEAKER SETUP PAGE --DOWNMIX
LT/RT
--- AUDIO SETUP ---
STEREO
MAIN PAGE
AUDIO OUT
OP MODE
LINE OUT
DYNAMIC
RF REMOD
LPCM OUTPUT
This is to activate the audio output from
DOLBY AC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
- Select the LT/RT to activate the Dolby
surround compatible output.
- Select the STEREO to activate simple
stereo mode.
MAIN PAGE
OP MODE
There are two operating modes for the
Dolby Digital decoder: LINE OUT and
RF REMOD.
16
SETUP
--- AUDIO SETUP ---
PREFERENCES SETUP
--- PREFERENCES PAGE ---
AUDIO OUT
OP MODE
FULL
DYNAMIC
6/8
LPCM OUTPUT
4/8
TV TYPE
AUTO
AUDIO
NTSC
SUBTITLE
PAL
DISC MENU
2/8
PARENTAL
OFF
PASSWORD
DEFAULTS
SMART NAV
MAIN PAGE
MAIN PAGE
TV type setup
This player can play discs recorded in
either PAL or NTSC format.
Select NTSC format, when you
connected to NTSC TV.
Select PAL format, when you connected
to PAL TV.
Select AUTO format, the player TV output
format will according to the DVD disc
format.
Dynamic Range Control
Select DRC and adjust the dynamic
range of a Dobly Digital encoded
program. There are 8 steps between full
compression and off compression.
--- AUDIO SETUP ---
--- PREFERENCES PAGE ---
AUDIO OUT
OP MODE
TV TYPE
DYNAMIC
AUDIO
ENGLISH
LPCM 48K
SUBTITLE
FRENCH
LPCM 96K
DISC MENU
SPANISH
PARENTAL
CHINESE
PASSWORD
JAPANESE
LPCM OUTPUT
DEFAULTS
SMART NAV
MAIN PAGE
MAIN PAGE
LPCM OUTPUT
Select the LPCM OUTPUT between
LPCM 48K and LPCM 96K.
AUDIO language setup
Select the preferred AUDIO soundtrack
by using the cursor buttons.
17
SETUP
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE --TV TYPE
TV TYPE
1G
AUDIO
AUDIO
2
SUBTITLE
ENGLISH
SUBTITLE
3 PG
DISC MENU
FRENCH
DISC MENU
4 PG 13
PARENTAL
SPANISH
PARENTAL
5
PASSWORD
CHINESE
PASSWORD
6 PG-R
DEFAULTS
JAPANESE
DEFAULTS
7 NC-17
SMART NAV
OFF
SMART NAV
8 ADULT
MAIN PAGE
NO_PARENTAL
MAIN PAGE
SUBTITLE language setup
Select the preferred SUBTITLE language
by using the cursor buttons.
PARENTAL
Select suitable parental guidance by the
cursor buttons and conformed by
pressing ENTER button.
--- PREFERENCES PAGE ---
--- PREFERENCES PAGE ---
TV TYPE
TV TYPE
AUDIO
AUDIO
SUBTITLE
SUBTITLE
DISC MENU
ENGLISH
DISC MENU
PARENTAL
FRENCH
PARENTAL
PASSWORD
SPANISH
PASSWORD
DEFAULTS
CHINESE
DEFAULTS
SMART NAV
JAPANESE
SMART NAV
MAIN PAGE
CHANGE
MAIN PAGE
PASSWORD
Select the change and press ENTER
button. Type the old password (The initial
factory code is 3308) and key in 4
characters password now you want to
use, and retype again to confirm key in
correctly.
DISC MENU language setup
Select the preferred DISC MENU
language by using the cursor buttons.
18
SETUP
--- PREFERENCES PAGE ---
DEFAULTS TABLE
TV TYPE
General Setup TV Display
AUDIO
SUBTITLE
Normal/LB
PIC Mode
AUTO
Angle Mark
ON
OSD Language English
DISC MENU
PARENTAL
Captions
ON
SCR Saver
ON
PASSWORD
Speaker Setup Downmix
Stereo
DEFAULTS
Audio Setup Audio Out
SPDIF/RAW
RESET
SMART NAV
MAIN PAGE
OP Mode
Line Out
Dynamic
FULL
LPCM Output LPCM 96K
Preferences TV Type
DEFAULTS
Select reset to become factory initial
setting.
--- PREFERENCES PAGE --TV TYPE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
NO MENU
SMART NAV
WITH MENU
MAIN PAGE
SMART NAV
In this item, you can select NO MENU
mode or WITH MENU mode.
19
AUTO
Audio
English
Subtitle
English
DISC Menu
English
Parental
NO Parental
Password
3308
Smart NAV
With Menu
SPECIFICATIONS
Supply Voltage
Current Consumption
Signal System
Discs Played
Audio Output Level
Audio Signal Output
Characteristics
:
:
:
:
12V DC (11V-15V), test voltage 14.4V, negative ground
Less than 2A
Compositive video 1.0Vp-p 75Ω
(1) DVD-VIDEO Disc
5” (12 cm) single-sided, single-layer
5” (12 cm) single-sided, double-layer
(2) Compact Disc (CD-DA, VIDEO CD)
5” (12cm) disc
: 600Ω (2 ch 2.0 Vrms)
: (1) Frequency Response
: (2) S/N Ratio
: (3) Wow and Flutter
20 Hz - 20 KHz
80 dB (JIS)
Below measurable limits
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
www.pyleaudio.com
20
88-V1743-01