Philips 20PFL4122/98 Specifications

中文
English
20PFL4122
Model No.:
Serial No.:
Downloaded From TV-Manual.com Manuals
P41TA029813 1A
Best
Component Video input
Provides superior picture
quality by separating the
green, blue and red
luminance signals.
Typically used with
red/white audio cables.
最好
分量視頻輸入
通過將綠色、藍色和紅色
亮度信號分离,
提供卓越的画面質量。
通常配合紅色/白色
音頻線使用。
Better
S-Video
Supplies a better picture
than RF and Composite
connections.
Used with red/white
audio cables.
很好
S 視頻
提供比 RF 和复合連接
更好的画面質量。
配合紅色/白色
音頻線使用。
Good
Composite Audio/Video
Separate video (yellow)
and audio (red/white)
cables that provide a
basic connection from
the cable box and
other devices.
Note: The color of audio
inputs may differ,
e.g. red/ white
or red/ black.
好
复合音頻/視頻
分离視頻(黃色)和
音頻(紅色/白色)線,
通過有線盒和其它設備
提供基本連接。
注意:音頻輸入的顏色
可能不同,如紅色/白色
或紅色/黑色。
Basic
RF
Provides a basic
connection for antenna
or cable.
Provides both audio
and video.
基本
RF
為天線或有線提供
基本連接。
提供音頻和視頻。
Downloaded From TV-Manual.com Manuals
Cover & Connection 1
SIDE AV
AUDIO
IN
L
VIDEO
IN
D-SUB
AUDIO IN
Y
Pb
Pr
L
R
S-VIDEO
R
AUDIO
IN
DVI-D
PC IN
CVI
AC IN
AC IN
DVI-D - Digital video interface, Audio input (shared w/ PC)
PC IN - D-SUB, Audio input
CVI - Component (YPbPr), Audio L/R input
75 /RF
Side AV - Audio L/R input, Video input, S-video
Earphone
Downloaded From TV-Manual.com Manuals
Cover & Connection 2
AC IN
DVI-D - 數字視頻接口、音頻輸入(與PC共用)
PC IN - D-SUB、音頻輸入
CVI – 分量 (YPbPr)、左/右音頻輸入
75 /RF
Side AV – 左/右音頻、視頻輸入、S 視頻
耳机
1
Cable Box With RF In / Outputs
Antenna TV
分線盒 (帶有RF輸入/輸出)
天線電視
Outdoor or Indoor Antenna
(Combination VHF/UHF)
室內或室外天線
(VHF/UHF組合)
or 或者
L
R
AUDIO
IN
CVI
TV
電視
TV
RF
The Cable TV signal
from Cable Company
來自有線電視公司
的有線電視信號
75
A
同軸線
OUTPUT
CH
3
CABLE
IN
2
4
TO
TV
Cable Box
B
coaxial cable
75
分線盒
*After setting up, please run the Auto store
function to set up the TV for the broadcast
or cable channels available in your area.
(please go to page10 for detail)
*在設置之後,請進行自動搜尋功能在電視
上設置您所在區域的廣播或有線頻道。
(詳細信息,請參見第10頁。)
Cable Box With
Audio / Video Outputs
SIDE AV
分線盒
(帶有聲音/視頻輸出)
AUDIO
IN
L
R
TV
VIDEO
IN
電視
S-VIDEO
B
C
S-Video
Composite
Audio/Video Input
D
OUTPUT
CH
3
CABLE
IN
4
A
Cable Box
Cable TV Signal 有線電視信號
i+
AV
*Use the AV button on the remote control to tune
to the AV channel for the cable box signal. Once
tuned, change channels at the cable box,
not the television.
*使用遙控器上的AV按鈕調到分線盒信號的AV頻道。
調整後,在分線盒(而不是電視)上更換頻道。
Downloaded From TV-Manual.com Manuals
Cover & Connection 3
L
TO
TV
分線盒
AUDIO
OUT
R
VIDEO
OUT
S VIDEO
3
VCR, DVD Player, Or Other
Devices With RCA Connectors
A
VCR, DVD播放機或帶有
RCA 連接器的其它設備
SIDE AV
AUDIO
IN
L
VIDEO
IN
R
TV
電視
S-VIDEO
B
Composite
Audio/Video Input
S-Video
AV Player with A/V connectors
帶有A/V接口的AV播放機
C
i+
AV
*Use AV button on the remote control to select SIDE AV.
*使用遙控器上的AV按鈕選擇SIDE AV。
4
DVD Player Or Other Video
Devices With Component Video
Connectors
DVD播放機或其它帶有 Component
視頻連接器的視頻設備
B
AUDIO IN
Y
Pb
Pr
L
R
AUDIO
IN
CVI
A
TV
電視
TV
Accessory device equipped
with component video outputs
帶有Component視頻輸出的
附屬設備
Component
Video Input
*Use AV button on the remote control to select CVI
to watch DVD.
Note: The Y, Pb, Pr jacks do not provide audio, so
audio cables must be connected to provide sound.
*使用遙控器上的AV按鈕選擇CVI以觀看DVD。
注意:Y,Pb,Pr插孔不提供音頻,
必須連接音頻線才能提供聲音。
Downloaded From TV-Manual.com Manuals
Cover & Connection 4
i+
AV
C
5
PC (Monitor) Connections
PC (顯示器)連接
D-SUB
AUDIO IN
Y
Pb
L
Pr
AUDIO
IN
PC IN
CVI
TV
A
C
Computer
i+
AV
*Use AV button on the remote control to
select PC to use your LCD TV as a PC monitor.
*使用遙控器上的AV按鈕選擇PC,
以將液晶電視用作PC顯示器。
6
Downloaded From TV-Manual.com Manuals
Cover & Connection 5
計算機
B
電視
R
Welcome
Know these
safety symbols
Congratulations on your purchase,
and welcome to the “family!”
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS. You’ve
selected one of the best-built, best-backed products
available today. We’ll do everything in our power to
keep you happy with your purchase for many years to
come.
This “bolt of lightning” indicates
uninsulated material within your unit
may cause an electrical shock. For the safety
of everyone in your household, please do not
remove product covering.
The “exclamation point” calls attention to
features for which you should read the
enclosed literature closely to prevent operating
and maintenance problems.
WARNING: To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed
on this apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
For Customer Use
Enter below the Serial No. which is located
on the rear of the cabinet. Retain this
information for future reference.
Model No._______________________
Serial No. _______________________
Downloaded From TV-Manual.com Manuals
1
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12
13.
14.
15.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation openings.
Install in accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and third grounding prong. The wide blade or third
prong are provided for your safety. When the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power supply cord or the plug has been damaged;
B. Objects have fallen, or liquid has been spilled into the
appliance;
C. The appliance has been exposed to rain
D. The appliance does not appear to operate normally or
exhibits a marked change in performance;
E. The appliance has been dropped, or the enclosure
damaged.
Downloaded From TV-Manual.com Manuals
16. Tilt/Stability - All televisions must comply with
recommended international global safety standards for tilt and
stability properties of its cabinet design.
• Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet which
could ultimately overturn the product.
• Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet. Such
items could unsuspectingly fall from the top of the set and
cause product damage and/or personal injury.
17. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
18. Power Lines - An outdoor antenna should be located away
from power lines.
19. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built up static charges.
20. Object and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.
21. Battery Usage CAUTION - To prevent battery leakage that
may result in bodily injury, property damage, or
damage to the unit:
• Install all batteries correctly, with + and - aligned as marked
on the unit.
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Remove batteries when the unit is not used for a long time.
22. For ventilation, leave at least 4” to 6” free all around the TV.
Do not place the TV on a carpet.
23. The equipment shall not be exposed to dripping or splashing.
24. The equipment shall not be exposed to rain or moisture and
objects filled with liquids, such as vases, shall be placed on the
apparatus.
25. The apparatus must be connected to a mains socket outlet
with a protected earthed connection.
26. The appliance coupler is used as the disconnect device of this
apparatus, the disconnect device shall remain readily operable.
2
Precaution
ADDITIONAL SAFETY PRECAUTIONS
• ENSURE that LCD TV stand is tightened properly to the set on the right way of tightening of
the screw of the stand to the set. Improper tightening of screw may render the set unsafe.
• If LCD TV is installed on the wall, installation should be carried out by qualified servicemen. Improper or incorrect
installation may render the set unsafe.
• Disconnect main plug when :
— cleaning the TV screen, never use abrasive cleaning agents.
— there is a lightning storm.
— the set is left unattended for a prolonged period of time.
• Do not shift or move the LCD TV around when it is powered on.
• Do not touch, push or rub the surface of the LCD screen with any sharp or hard objects.
• When the surface of the LCD screen becomes dusty, wipe it gently with an absorbent cotton cloth or
other soft material like chamois. DO NOT USE acetone, toluene or alcohol to clean the surface of the screen.
These chemicals will cause damage to the surface.
• Wipe off water or saliva as soon as possible. These liquids can cause deformation and color fading of the
LCD screen when left exposed for some time.
• Be careful of condensation when temperature changes occur. Condensation can cause damage to the LCD
screen and electrically parts. After condensation fades, spots or blemishes will be present on the LCD screen.
POSITIONING THE LCD TELEVISION
• Place the LCD TV on a solid, sturdy base or stand. Be sure the stand is strong enough to handle the weight of
the LCD TV.
• Try to leave at least 6” of space around each side of the LCD TV cabinet to allow for proper ventilation.
• Do not place the LCD TV near a radiator or other sources of heat.
• Do not place the LCD TV where it can be exposed to rain or excessive moisture.
RECYCLING PROCEDURE/END OF LIFE DISPOSAL
• To minimize harm to the environment, the batteries supplied with the LCD TV do not contain mercury or
nickel cadmium. If possible, when disposing of batteries, use recycling means available in your area.
• The LCD TV uses materials that can be recycled. To minimize the amount of waste in the environment, check
your area for companies that will recover used televisions for dismantling and collection of reusable
materials, or contact your dealer for TV recycling tips.
• Please dispose of the carton and packing material through the proper waste disposal management in your
area.
Downloaded From TV-Manual.com Manuals
3
Here are a few of the special features of your new
LCD TV.
Audio/Video In Jacks: Use to quickly connect
other
equipment to your LCD TV.
Automatic Channel Storing (Auto Store):
Quick and easy setup of available channels.
On-screen Menus: Helpful messages (in English,
Simplified Chinese, Thai or Arabic) for setting TV
controls.
Remote Control: Works your LCD TV
features.
Sleep Timer: Turns off the LCD TV within an
amount of time you specify (0-180 minutes from
the current time).
AutoLock: Lets you block viewing of certain TV
channels if you do not want your children viewing
inappropriate material.
Standard broadcast (VHF/UHF) or Cable TV
channel capability.
Stereo capability: Includes a built-in amplifier
and twin-speaker system, allowing reception of
TV programs broadcast in stereo.
Treble, Bass, and Balance: Enhance the LCD
TV’s sound.
Care of the screen See Tips, p. 25
End of life directives - Recycling
Philips has paid a lot of attention to
producing an environmentally friendly product.
Your new TV contains several materials that can
be recycled for new uses. At the end of its life,
specialized companies can dismantle and recycle
this set. This will minimize the amount of
materials being disposed of. Please be sure to
dispose of this set in accordance with all state
and local regulations.
Downloaded From TV-Manual.com Manuals
Contents
Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . 2
Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Use of the remote control . . . . . . . . . . . . . . . . . . . . . . 6
Buttons on the top of the TV . . . . . . . . . . . . . . . . . . . . 8
To use the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
9
How to navigate through the Settings menu
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TV menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
10
Install
10
Select the menu language
10
Auto store TV channels
11
Manual sotre, Prog. no, Finetune, Store
12
Channel setting, Channel edit, Channel swap,
12
Name edit, Channel sort
13
Factory reset
14
Features menu
16
Picture menu
18
Sound menu
Record with your recorder. . . . . . . . . . . . . . . . . . . . . . 19
19
Record a TV program
PC menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
22
Picture menu
22
Sound menu
Trouble shooting tips . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Care and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4
Preparation
1
Do not insert the power plug in a wall socket before
all connections are made.
Place the TV on a solid surface.
For ventilation, leave at least 4” to 6” free all around the TV. Do
not place the TV on a carpet. To prevent any unsafe
situations, no naked flame sources, such as lighted candles,
should be placed in the vicinity. Avoid heat, direct sunlight and
exposure to rain or water. The equipment shall not be exposed
to dripping or splashing.
Mounting the TV on the wall
This TV set complies with the VESA standard for wall mounting.
Refer to specification page 26 for detail.
Caution: Installing the TV requires special skills that should
only be performed by qualified personnel. You should not
attempt to do the work yourself. Philips bears no
responsibility for improper mounting or mounting that
results in accident or injury.
Make sure that the wall mount is being fixed securely enough so
that it meets safety standards.
ANTENNA
CABLE
2 To connect accessory devices, see Cover and Connection.
3 Refer to the bottom of the set (Model label) for the
CABLE OR ANTENNA
75
ANTENNA
CABLE
HDMI 1
IN
OUTPUT
/OUT
(TO TV)
correct operation voltage.
Insert the power cord into the wall socket.
Consult your local dealer if your main power supply voltage is
different than that indicated for the TV. Never place the TV
on top of the (AC) cord. Placing the TV on top of the AC cord
could cause a fire or electric shock.
4 Remote control:
Insert the two supplied AAA batteries.
The batteries supplied do not contain the heavy metals mercury
and cadmium. Please determine and comply with local
regulations when disposing of depleted batteries.
5 Turn the TV on:
Press the power switch on the top of the TV. An
indicator on the front of the TV lights up.
Press the POWER button or the P + / - button on the
remote control. Alternatively, press the MENU button or
PROGRAM +/- button on the top of the TV.
H DM I 2
CABLE OR ANTENNA
75
2
3
Downloaded From TV-Manual.com Manuals
5
Use of the remote control
Note: Pressing most buttons once will activate the assigned function. Pressing a second time will de-activate it.
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.
The list will be removed automatically after six seconds or press OK to remove immediately.
POWER
Press to turn the LCD TV on or off.
Picture Format button
Press the FORMAT button repeatedly to toggle
among the four screen format sizes:
4:3, Expand 4:3, Compress16:9, HD4:3.
Sleep button
Press to set the LCD TV to turn itself off
within a certain time.
I-II button / Sound mode
Press repeatedly to select Mono, Stereo, Dual
I, Dual II, Nicam Mono, Nicam Stereo, Nicam
Dual I, Nicam Dual II.
Note: The sound mode selections depend on TV
program and broadcast TV channel of that region.
Smart Sound button
Press repeatedly to select among the 5
settings: Personal, Speech, Music, Movie, or
Multimedia.
Incredible Surround button
Adds greater depth and dimension to TV
sound.
Select from Incredible surround On or
Incredible surround Off.
Smart Picture button
Press repeatedly to select either Personal,
Rich, Nature, Soft, or Multimedia of picture
setting.
MENU
Press menu to activate on screen menu
on/off.
A/CH button
Press to go to previously selected channel.
A/CH
Teletext button
Teletext On/Off
Teletext hold
Freezes the teletext page.
Teletext mix
Teletext background become transparent,
content mixes with images.
Teletext reveal/conceal
Press to toggle between conceal and reveal
mode.
Main index
Press to return to the main index.
Teletext enlarge
Press to enlarge context to two times
larger.
A/CH
P +/Press to adjust the channel up or down.
Press to roll the teletext page up or down.
i+
AV
i+
AV
Number button
Press the number buttons for direct access to
the TV channels. For 2 digit channel, enter the
2nd digit after enter 1st digit.
i+
Information button
Press to see the current channel number on
the TV screen.
These four color buttons allow you to
access the item or the page indicated by
corresponding color in teletext.
AV
AV button
Press to select the video input source:
TV, CVI, AV, PC, DVI.
Note: Teletext is only available in some of the
Asia Pacific TV systems.
Downloaded From TV-Manual.com Manuals
Mute button
Press to eliminate or restore the LCD TV
sound. Mute will appear on the screen when
the sound is muted.
A/CH
VOL +/Press + or - to adjust the volume.
6
FORMAT
Press this button to display a list of available display formats.
Available display formats are determined by the type of signal you
are receiving.
To choose the display format you prefer, press the FORMAT
button repeatedly:
For 20PFL4122
4:3, Expand 4:3, Compress 16:9, HD 4:3.
A/CH
i+
4:3
Expand 4 : 3
Compress 16 : 9
HD 4 : 3
AV
Note:
• For 720p/1080i, the default picture format will be 4:3 at HD and
DVI modes. And the picture format function can be accessible.
• For 576i/576p, the picture format function is accessible at HD and
DVI modes.
• For PC mode, the default picture format will be Full screen and
picture format function will not be accessible.
Downloaded From TV-Manual.com Manuals
7
Buttons on the top of the TV
POWER
PROGRAM
MENU
VOLUME
Should your remote be lost or broken you can still change some
of the basic settings with the control buttons on your TV.
Press:
•the button to switch the TV on or off.
•the + VOLUME -button to adjust volume;
•the + PROGRAM -buttons to select the TV channels or
sources, and can also switch the TV on during standby mode.
The MENU button can be used to display the Settings menu
without the remote control. MENU button can also Exit the
menu, and switch the TV on during standby mode.
Use:
•the + VOLUME - buttons and the + PROGRAM - buttons to
select menu items in the directions as shown;
•the + VOLUME button to confirm your selection.
Downloaded From TV-Manual.com Manuals
8
To use the menus
Introduction
When you use a menu or take an action, convenient instructions, help texts and messages will be displayed on your TV.
Please, follow the displayed instructions and read the help text on the specific item highlighted.
The color buttons perform different actions, when using on screen menu. By pressing the corresponding color button on
the remote control to perform the required action when using these menus.
How to navigate through the Settings menus
Main Control
Main Control
4
Picture
8
Picture
8
Color
The Settings
menu
allows you to access and change
settings and preferences settings.
Picture
Smart picture
Smart picture
Sound
Contrast
Contrast
Features
Brightness
Brightness
Install
Color
4
Picture
Tint
Picture
Smart
picture
Color temp
Sound
Picture format
Contrast
Features
Info
Brightness
Install
Color
8
Sharpness
Tint
Color temp
Main Control
Picture
8
Info picture
Smart
Picture
format
Smart picture
70
Rich
Brightness
50
Nature
Color
50
Sharpness
Main
Control
Picture
Tint
3
8
+00
Smart
picture
Color temp
Soft
Smart picture
Personal
70
Rich
Brightness
Info
50
Nature
Color
50
Tint
3
Soft
Multimedia
+00
Color temp
Picture format
8
Contrast
Smart picture
Contrast
70
Brightness
50
Color
50
Picture
Tint
8
+00
70
Brightness
Info
50
Color
50
Color
Contrast
3
8
8
Brightness
Brightness
50
Color
50
Contrast
70
Warm
Brightness
50
Cool
Color
50
Sharpness
Main
Control
8
+00
Smart
picture
Color temp
Brightness
Downloaded
From TV-Manual.com
Manuals
Contrast
70
Picture format
50
Color temp
Normal
Contrast
Picture format
70
Warm
Brightness
Info
50
Cool
Color
50
Sharpness
3
Tint
Color temp
Main Control
3
3
+00
8
Smart
picture
Color temp
3
Color temp
Normal
Tint
Picture
70
Brightness
Info
3
+00
Info picture
Smart
+00
Contrast
Picture
Tint
50
Sharpness
Picture
Picture format
Info picture
Smart
Sharpness
Main
Control
Tint
Color temp
Main Control
Color temp
Main Control
Picture
Picture format
8
• Press the cursor left to go one menu level up again.
Contrast
70
- Press the
OK button on the highlighted item to activate
Brightness
50
and
to
dismiss
the menu.
Color
50
- Press the3 MENU button again to exit the Settings menu.
Sharpness
Main
Control
Tint
+00
Picture
8
Tint is also dismissed by pressing one of the color
Note: The
menu
Smart
picture
Color temp
buttons (if present) referring to certain actions which may be
Contrast
70
Picture format
executed.50
Brightness
Tint
Contrast
Picture format
Tint
5
Info
3
Smart
picture
Color temp
Sharpness
Sharpness
Info picture
Smart
Main Control
Sharpness
Main
Control
8
- Use the cursor right to enter the right panel.
Contrast
70
The content
of the right panel is moved to the left panel
Brightness
50
and
the
right
panel shows the content of the newly
Color
50
Sharpness
3
Main Control highlighted item in the left panel.
Picture
Tint
Note: In+008someSharpness
cases, you will want to watch the picture on
Smart
picture
Color temp
your
screen
while
adjusting settings. This means that when the
Contrast
70
Picture format
Brightness
Info
highlight50is on the right side panel, the other menu items are
Color
50
hidden. When
the cursor left is pressed again, the hidden
Sharpness
3
menu
items
re-appear
and the highlight moves to the left
Tint
+00
panel.
Color temp
Main Control
Picture format
Info
Picture
Picture format
Info picture
Smart
Multimedia
Contrast
Picture format
Sharpness
5
Personal
Contrast
50
• Press the
MENU button on the remote control to
50
display the
Settings menu.
Sharpness
3
Main
Control
Picture
8
Color
- Use cursor
up/down
to highlight and select a menu item
Tint
+00
Smart
picture
Color temp
on the left panel.
Contrast
70
Picture format
The right
panel shows the content of the menu you have
Brightness
50
Info
highlighted
in the left panel.
Color
50
Sharpness
3
Note: Sometimes not all the menu items are visible on the
Tint
+00
Color temp screen. Use cursor down to scroll down to additional items.
Main Control
Color
Sharpness
Main Control
70
+00
9
3
TV menu-Install
Select the menu language
Main Control
Install
5
Language
Language
English
Auto store
中文
Manual store
Channel setting
Factory reset
4
Press the MENU button on the remote control.
Use the cursor down to select Install in the Settings menu.
Use the cursor right to enter the Install menu.
Select Language and enter the list of available languages with the
cursor right.
5 Select your preferred language with the cursor up/down and press
the OK button to confirm your selection.
6 Proceed with the Install menu.
1
2
3
4
Info
Auto store TV channels
Main Control
Install
5
Auto store
Language
Auto store
Start ?
Manual store
Channel setting
Factory reset
1
2
3
4
5
Press the MENU button on the remote control.
Use the cursor down to select Install in the Settings menu.
Use the cursor right to enter the Install menu.
Press cursor down to select Auto store in the Install menu.
Use the cursor right to enter the Auto store menu and press OK
to start scanning of channels.
Info
Auto store
Please wait
Prog. found
0
Freq 246.50 MHz
Auto storing may take up to 3 minutes to complete. Please wait
until you see the Auto storing is completed. The TV will then
switch automatically to the first channel found.
Notes:
• Immediately after unpacking and plugging in your new television, run the auto store function to set up the TV for the broadcast or
cable channels available in your area. If you do not run the auto store function to set up the channels, your television may not
operate properly.
• After you’ve run Auto store, check out the results. Press P (+) or the P (-) button and see which channels you can select.
• Remember, an antenna or cable TV signal must first be connected to your LCD TV.
Downloaded From TV-Manual.com Manuals
10
Main Control
Install
5
Manual store
Language
Manual store
Auto store
Prog. no
Manual store
Finetune
Channel setting
Store
Factory reset
4
Manual store
1 Select Manual store in the Install menu.
2 Press the cursor right to enter Manual store, and press the
Main Control I Install
Manual store
4
Manual store
Manual store
xxx.xx MHz
Prog. no
Start?
Finetune
50
Store
Info
2
cursor right again to activate auto search channel frequence or
press number buttons to show your desired channel frequence.
3 Use the cursor right to start searching.
Info
Main Control I Install
Manual store
4
Prog. no
Manual store
2
Prog. no
Finetune
50
Store
Prog. no
1 Select Prog. no in the Manual store menu.
2 Press the cursor right to enter it, when the channel frequence is
confirmed.
3 Press the cursor up/down to adjust the channel number.
4 Press the cursor right/left to confirm the channel.
Info
Main Control I Install
Manual store
4
Finetune
2
Manual store
Prog. no
Finetune
Finetune
1
2
3
4
50
Store
Select Finetune in the Manual store menu.
Press the cursor right to enter Finetune.
Press the cursor up/down to adjust.
Press the cursor right/left to confirm.
Info
Main Control I Install
Manual store
4
Store
Manual store
Store ?
Prog. no
Finetune
50
Store
Store
1 Select Store in the Manual store menu.
2 Press the cursor right to enter Store.
3 Press the cursor right to confirm stored.
Info
Note:
If the channel reception is satisfatory, please go to page 12.
Downloaded From TV-Manual.com Manuals
11
Main Control
Install
4
Channel setting
Language
Channel edit
Auto store
Channel swap
Manual store
Name edit
Channel setting
Channel sort
Channel setting
4
1 Select Channel setting in the Install menu.
2 Press the cursor right to enter Channel setting.
3 Use the cursor up/down to toggle among Channel edit,
Channel swap, Name edit, or Channel sort.
Factory reset
4 Press the cursor right to enter the selection.
Info
Channel edit
Main Control l Install
Channel setting
4
Skipped
Channel swap
Channel sort
Main Control l Install I Channel setting
Channel edit
2
Skipped
Channel
Active
Skipped
Skipped
2
or remove.
4 Press the cursor right/left to confirm.
5 Select Skipped in the Channel edit meun.
6 Use the cursor up/down to select Active (to add) or Skipped (to
remove) the channel you selected.
Info
7 Press the cursor right/left ot confirm.
Info
Channel swap
Main Control l Install
Channel setting
4
Channel swap
Channel edit
From
Channel swap
To
3
Exchange
Name edit
Channel sort
1 Select Channel edit in the Channel setting menu.
2 Press the cursor right to enter it.
3 Use the cursor up/down to select the channel that you want to add
2
Channel
Channel edit
Name edit
Channel edit
cursor right to enter the selection.
Main Control l Install I Channel setting
Channel swap
3
4 Use the cursor up/down to adjust the channel and press the
Exchange
From
cursor right/left to confirm.
Exchange ?
To
1 Select Channel swap in the Channel setting menu.
2 Press the cursor right to enter it.
3 Use the cursor up/down to select From or To and press the
Exchange
5 Select Exchange in the Channel swap meun.
6 Press the cursor right to activate Exchange or press the cursor left
Info
to inactivate it.
Info
Main Control l Install
Channel setting
4
Name edit
Channel edit
Channel
Channel swap
......
2
2
Name edit
Channel sort
Name edit
1 Select Name edit in the Channel setting menu.
2 Press the cursor right to enter it.
3 Use the cursor up/down to edit name, and press the cursor right to
move to the next character.
4 Press the cursor left to confirm the first character and press the
cursor right to confirm the last character.
5 Press the cursor right to confirm the name.
Info
Main Control l Install
Channel setting
4
Channel sort
Channel edit
Channel swap
Sort?
Name edit
Channel sort
Channel sort
1 Select Channel sort in the Channel setting menu.
2 Use the cursor right to sort the channel.
3 Use the cursor left to return to the previous menu.
Info
Downloaded From TV-Manual.com Manuals
12
Factory reset
Main Control
Install
5
Factory reset
Language
No
Auto store
Yes
Manual store
Channel setting
2
1 Select Factory reset in the Settings menu.
2 Press the cursor right to enter Factory reset.
3 Select Yes and press the cursor right for resetting the original
factory settings.
Factory reset
Info
Note:
If you reset the TV to the factory settings, all your present setting on
picture, sound, and other feature settings will be erased and replaced
by the manufacture’s default settings. However, your AutoLock access
code will not be erased. Please refer to page 15 for detail.
Downloaded From TV-Manual.com Manuals
13
TV menu-Features
Features menu
Main Control
4
Features
Picture
Timer
Sound
NR
Features
Auto lock
Install
Source list
4
1 Select Features in the TV Settings menu.
2 Press the cursor right to enter the features menu.
3 Select the menu items with the cursor up/down, and
adjust the settings with the cursor left/right.
Info
Main Control
Main Control
Features
Picture
Timer
Sound
NR
Features
Auto lock
Install
Source list
4
4
Features
Timer
Timer
Clock
NR
Start time
Auto lock
Stop time
Source list
Sleep timer
4
4
Timer
Main Control
Auto lock
3
1 SelectFeatures
Timer in the4 Features
menu.
Lock program
Timer
2 Use the
cursor down to choose
the item you want to adjust and
Change code
NR
pressAuto
the
enter
Clock, Start time, Stop time,
lock cursor right to Clear
all
Source list timer.
and Sleep
Clock: Allow you to set the time.
Info
Info
Main Control
Main Control
Features
Features
Timer
Timer
NR
NR
Auto lock
Auto lock
Source list
Source list
Info
4
4
Timer
NR
Clock
On
Start time
Off
Stop time
Start time: Allow you to set the time for turning on the
TV automatically.
Stop time: Allow you to set the time for turning off the
4
Auto lock
3
4 TV automatically.
Source list
7
Main Control
Main Control
Features
Features
Timer
Timer
NR
NR
Auto lock
Auto lock
Source list
Source list
4
2
Lock program
TV
Change code
CVI 1
Clear all
CVI 2
Sleep timer: Allow you to set the time period, after
which the TV will turn to standby mode
AV 1
automatically.
AV 2(side)
This
PC list will have values from 0 to 180.
Sleep timer
DVI
Info
Info
Info
Info
Main Control
Features
4
NR
Timer
On
NR
Off
2
NR
Timer
Source list
Source list
Downloaded From TV-Manual.com Manuals
Features
4
Source list
7
TV
Automatically
filters out and
reduces the image noise and improves
CVI 1
NR
picture
quality when receiving
weak video signals.
Auto lock
CVI 2
Auto lock
Info
Main Control
1
2
3
4
AV 1
AV 2(side)
Select NR in the FeaturesPC menu.
Press the cursor right to enter
it.
DVI
Use the cursor down to select On or Off.
Press Info
the cursor right to activate or inactivate noise reduction.
14
Main Control
4
Features
Picture
Timer
Sound
NR
Features
Auto lock
Install
Source list
4
Auto lock
The Auto lock feature allows you to lock channels, and
prevent your children from watching unsuitable content of
programmes.
Auto lock offers various Blocking controls from which to
choose:
Main Control
Features
4
Auto lock
3
Lock program
Timer
NR
Change code
Auto lock
Info
Source list
Clear all
Settings
Features
4
Auto lock
Access code - An Access code must be set to prevent
children from unblocking questionable or
censored programming set by their parents.
Access code
Timer
NR
Auto lock
Source list
Info
Lock program - Select the TV channel you want to lock.
Info
Chang code - To change your access code or overwriting.
Clear all - To unlock all locked channels and programming.
Main Control I Features
Auto lock
3
Lock program
Lock program
Change code
18
Clear all
Main Control
Features
4
Auto lock
NR
Change code
Auto lock
Clear all
Source list
Info
3
Lock program
Timer
1
2
3
4
Select Auto lock in the feature menu.
Press the cursor right to enter it.
Access code will appear on the screen.
Enter a four-digit code using the number buttons.
Settings
Features
4
Auto lock
Access code
Timer
NR
Auto lock
Source list
Info
Note:
Remember that 0711 is the default Auto lock code. If your access code
has been changed by someone other than you (a child, for example)
or you have forgotten the code, you can always get in by inputting the
default code.
Info
Lock program
Main Control I Features
Auto lock
3
Lock program
Lock program
Change code
18
Clear all
After your personal access code has been set, you are ready to
select the channels or inputs you want to block out or censor.
1 Select Lock program in the Auto lock menu.
2 Press the cursor right to enter it.
3 Use the number buttons to enter the channel which you are going
to block.
4 Press the cursor up/down to block the current channel.
Info
Note:
You can block additional channels by using the number buttons to
jump to another channel.
Downloaded From TV-Manual.com Manuals
15
TV menu-Picture & Sound
Picture menu
Main Control
Main Control
4
Picture
8
Picture
8
Color
Sharpness
1 Select Picture in the TV settings menu.
Contrast
2 Press the 70cursor right to enter the Picture menu.
Brightness
50
3 Select the50menu items with the cursor up/down.
Color
4 Adjust the3 settings with the cursor left/right, and enter the list of
Sharpness
Tint
Tint
Color temp
Color temp
Picture
Smart picture
Sound
Contrast
Features
Brightness
Install
Color
Smart picture
submenu +00items with the cursor right. Select a submenu item with
the cursor up or down.
Picture format
Picture format
Info
Info
Smart picture
Picture
Main Control
8
Smart picture
Smart picture
Personal
Contrast
70
Rich
Brightness
50
Nature
Color
50
Sharpness
Tint
Select Smart picture to display a list of predefined picture
Picture settings, each
8
Sharpness
corresponding
with specific factory settings.
Smart picture
Personal refers to the personal preference settings of picture in
Contrast
70
the picture50 menu.
Brightness
Note: This 50Philips TV has been set at the factory to look best in bright
Color
Sharpnessstore environments,
3
which typically use fluorescent lighting. As your
Tint
home will +00
likely not be as well lit as a store, we recommend that you
Color temp
cycle through the various smart picture modes to find the one that best
Picture format
Info
suits your own viewing conditions.
1
Main Control
3
Soft
Multimedia
+00
Color temp
Picture format
Info
5
You can press the Smart picture button on the remote control
repeatedly to select either Personal, Rich, Nature, Soft, or
Picture
8
Tint
Multimedia picture settings.
Smart picture
Contrast Note:
70
Brightness• The moment
50
you are in a predefined Smart picture setting and you modify
Color
50
the Picture menu, all values of the menu will overwrite those previously made
Sharpness
3
in personal+00setting.
Tint
2
Main Control
Main Control
Picture
8
Contrast
Smart picture
Contrast
70
Brightness
50
Color
50
Sharpness
Tint
Color temp
Picture format
Contrast
Info
3
Adjust to “sharpen” the picture quality. The black portions of the
picture become richer in darkness and the white become brighter.
+00
Color temp
Picture format
Main Control
Info
Picture
8
Smart picture
Main Control
Picture
8
Brightness
Smart picture
70
Brightness
50
Color
50
Sharpness
Tint
Contrast
70
Warm
Brightness
50
Cool
Color
50
Sharpness
3
3
3
Tint
Contrast
Color temp
Normal
Brightness
+00
Color temp
Adjust to brighten the dark parts of the picture. This appears to
add white to the color.
Picture format
Info
+00
Color temp
Picture format
Info
Main Control
Picture
8
Smart picture
4:3
Contrast
70
Expand 4:3
Brightness
50
Compress 16:9
Color
50
HD 4:3
Sharpness
3
Tint
+00
Color temp
Downloaded From TV-Manual.com Manuals
Picture format
Picture format
Info
16
4
Main Control
Picture
8
Color
Color
Smart picture
Contrast
70
Brightness
50
Color
50
Sharpness
Tint
Adjust to add or reduce color.
3
+00
Color temp
Picture format
Info
Main Control
Picture
8
Sharpness
Smart picture
Contrast
70
Brightness
50
Color
50
Sharpness
Tint
Sharpness
Adjust to improve detail.
3
+00
Color temp
Picture format
Info
Main Control
Picture
8
Tint
Smart picture
Contrast
70
Brightness
50
Color
50
Sharpness
Tint
Tint
Allows you to select the picture’s color mix or hue.
3
+00
Color temp
Picture format
Info
Main Control
Picture
8
Smart picture
Color temp
Contrast
70
Warm
Brightness
50
Cool
Color
50
Sharpness
Tint
3
Normal
3
+00
Color temp
Picture format
Color temp
Adjust to increase or decrease Warm (red) and Cool (blue)
colors to suit personal preferences.
Select Cool to give the white colors a blue tint, Normal to give
the white colors a neutral tint, Warm to give the white colors
a red tint.
Info
Main Control
Picture
8
Smart picture
Picture format
4:3
Contrast
70
Expand 4:3
Brightness
50
Compress 16:9
Color
50
HD 4:3
Sharpness
Tint
3
4
Picture format
Adjust to change the screen format to match the type of program
you are watching. Please refer to page 7 for detail.
+00
Color temp
Picture format
Info
Downloaded From TV-Manual.com Manuals
Note:
Any adjustment of Brightness, Color, Contrast or Sharpness will be
stored into Personal at Smart picture section.
17
Main Control
4
Sound
Picture
Smart sound
Sound
Settings
Features
Incredible surround
Install
AVL
1
2
3
4
Select Sound in the TV settings menu.
Press the cursor right to enter it.
Select the menu items with the cursor up/down.
Press the cursor right to enter the selection.
Smart sound
Info
Main Control
Sound
Sound menu
4
4
Smart sound
Smart sound
Personal
Settings
Speech
Incredible surround
Music
AVL
Movie
5
Smart sound allows you to select from four user presets and a
personal mode that you set according to your own preferences
through the onscreen Sound menu. The five user presets
(Personal, Speech, Music, Movie, and Multimedia) enable you to
tailor the TV sound so as to enhance the particular program you
are watching.
1 Select Smart sound in the Sound menu and press the cursor right
Multimedia
to enter it.
2 You can press the Smart sound button on the remote control
Info
repeatedly to toggle between Personal, Speech, Music, Movie
and Multimedia.
Main Control
Sound
4
Settings
3
Treble
Smart sound
Settings
Bass
Incredible surround
Balance
Settings
Allows you to adjust Treble, Bass, and Balance of the sound.
AVL
Info
Main Control
Sound
4
Incredible surround
Smart sound
On
Settings
Off
2
Incredible surround
Adds greater depth and dimension to TV sound. Select from On
or Off.
Incredible surround
AVL
Info
Main Control
Sound
4
AVL
Smart sound
On
Settings
Off
Incredible surround
AVL
2
AVL
Automatically reduces the volume differences between channels
and programs, providing a more constant overall level. This will
also reduce the dynamics of sound.
Info
Downloaded From TV-Manual.com Manuals
18
Record with your recorder
A/CH
i+
Recorder
Pr
Pb
Y
L
R
VIDEO
AV
Record a TV program
You can record a TV program using your recorders tuner
without affecting your TV.
1 Select the channel number on your recorder.
2 Set your recorder to record.
See the handbook for your recorder.
Note: Switching channel numbers on your TV does not disturb
recording !
TV
A/CH
To select connected devices
1 Press the AV button repeatedly or select Source list in the
Settings menu to select TV, CVI, AV, PC, or DVI according to
where you connected your devices.
i+
AV
Downloaded From TV-Manual.com Manuals
2 Press the cursor up/down.
3 Press OK.
19
PC menu-Picture & Sound
Note:
This TV can also be used as a PC Monitor. A PC video signal must be
present or the TV will go into standby mode. The PC Picture controls
allow you to adjust the picture.
Please make sure you are in PC mode.
Main Control
4
Picture
Picture
Color temp
Sound
Brightness
Features
Contrast
Install
Auto adjust
5
Picture
1
2
3
4
5
6
Manual adjust
Info
Main Control
Picture
Main Control
5
Color temp
Brightness
Contrast
100
50
Color temp
3
Picture
Normal
Color temp
Warm
Brightness
Cool
Contrast
Auto adjust
Manual adjust
Info
5
Auto adjust
Color temp100
Yes
50
Adjust to increase
or decrease Warm (red) and Cool (blue)
Auto adjust
colors to suit personal preferences.
Manual adjust
Select Cool to give the white colors a blue tint, Normal to give
the white colors a neutral tint, Warm to give the white colors
a red tint.
Info
Main Control
Picture
Press the MENU button on the remote control.
Select Picture in the Settings menu.
Use the cursor right to enter the Picture menu.
Use the cursor up/down to highlight the menu items.
Press the cursor right to enter the selection.
Use the cursor up/down to adjust the item.
Main Control
5
Brightness
Color temp
Picture
5
Manual adjust
4
Phase
Color temp
Auto adjust
Clock
Brightness 100
Horizontal
50
Adjust to brighten
the darkest parts of the picture.
Auto adjust
Vertical
Manual adjust
Manual adjust
Info
Info
Brightness
Contrast
100
Brightness
50
Contrast
Main Control
Picture
5
Contrast
Color temp
Brightness
Contrast
100
50
Auto adjust
Manual adjust
Info
Downloaded From TV-Manual.com Manuals
Contrast
Adjust to “sharpen” the Picture quality. The black portions of
the picture become richer in darkness and the white become
brighter.
Note:
Color temp can also be activated by pressing Smart picture button on
your Remote Control.
20
Main Control
Picture
5
Auto adjust
Auto adjust
Color temp
Brightness
100
Contrast
The LCD Monitor will automatically adjust to the best image
position, phase, and clock setting.
Yes
50
Auto adjust
Manual adjust
Info
Manual adjust
The Manual adjust control allows you to manually fine tune the
image as it appears on the screen.
Phase - eliminates the horizontal interfering lines.
Main Control
Picture
5
Manual adjust
4
Phase
Color temp
Brightness
100
Contrast
50
Auto adjust
Clock - eliminates the vertical interfering lines.
Clock
Horizontal
Horizontal - adjust the horizontal placement of the
picture.
Vertical
Manual adjust
Vertical - adjust the vertical placement of the picture.
Info
1 Use the cursor up/down to adjust the item.
2 Press the cursor right to confirm.
Note:
If you are willing to reset adjustment back to original value, please
enter to Factory Reset in Install menu.
Setting up the PC mode (Personal Computer Monitor)
20PFL4122 (20” LCD TV)
No
Resolution
Mode
V. Frequency (Hz)
H. Frequency (kHz)
1
640 x 350
VGA
70.087
31.469
*2
640 x 480
VGA
59.940
31.469
3
640 x 480
Macintosh
66.667
35.000
4
720 x 400
VGA
70.087
31.469
* Recommended Resolution
Downloaded From TV-Manual.com Manuals
21
Main Control
4
Picture
Sound
Sound
Settings
Features
Incredible surround
Install
AVL
1
2
3
4
Select Sound in the settings menu.
Press the cursor right to enter it.
Select the menu items with the cursor up/down.
Press the cursor right to enter the selection.
Smart sound
Info
Main Control
Sound
Sound menu
4
Smart sound
4
Smart sound
Smart sound
Personal
Settings
Speech
Incredible surround
Music
AVL
Movie
5
Smart sound allows you to select from four user presets and a
personal mode that you set according to your own preferences
through the onscreen Sound menu. The five user presets
(Personal, Speech, Music, Movie, and Multimedia) enable you to
tailor the TV sound so as to enhance the particular program you
are watching.
Multimedia
1 Select Smart sound in the Sound menu and press the cursor right
to enter it.
Info
2 You can press the Smart sound button on the remote control
repeatedly to toggle between Personal, Speech, Music, Movie
and Multimedia.
Main Control
Sound
4
Settings
3
Treble
Smart sound
Settings
Bass
Incredible surround
Balance
Settings
Allows you to adjust Treble, Bass, and Balance of the sound.
AVL
Info
Main Control
Sound
4
Incredible surround
Smart sound
On
Settings
Off
2
Incredible surround
Incredible surround
AVL
Adds greater depth and dimension to TV sound. Select from On
or Off.
Info
Main Control
Sound
4
AVL
Smart sound
On
Settings
Off
Incredible surround
AVL
2
AVL
Automatically reduces the volume differences between channels
and programs, providing a more constant overall level. This will
also reduce the dynamics of sound.
Info
Downloaded From TV-Manual.com Manuals
22
Trouble Shooting Tips
Symptoms
Items to Check and Actions to follow
“Ghost” or double
images
• This may be caused by obstruction to the antenna due to high rise buildings or hills.
Using a highly directional antenna may improve the picture.
No power
• Check that the TV’s AC power cord is plugged into the mains socket.
• Unplug the television, wait for 40 seconds. Then re-insert plug into the mains socket
and turn on the television again.
No picture
• Check antenna connections at the bottom of the TV to see if they are properly connected to the TV.
• Possible broadcast station trouble. Try another channel.
• Adjust the contrast and brightness settings. Try another auto picture setting.
• Check if you selected the correct AV source.
No picture and power
switched on
• Your TV has a protective mode in case there is too much heat build-up. Check the
clearance around the vents of the device to be certain there are no blocking walls or
cabinets which would limit the air flow.
Picture position
adjustment
Most High Definition receiver boxes also have picture-positioning controls in their menu
systems. If the TV cursor controls run out of range before the picture is correctly positioned, the
receiver box controls will need to be adjusted.
No photo, music or
video play or in poor
quality only
• Check if the source complies with a supported code.
No sound
• Increase the VOLUME.
• Check that the TV is not muted, press the MUTE button on the remote control.
• When no signal is detected, the TV automatically switches off the sound. This is proper
operation and does not indicate a malfunction.
Good sound but poor
color or no picture
• Adjust the contrast, color, tint and brightness setting. Try another auto picture setting.
Snowish picture and
noise
Television not
responding to
remote control
• Check the antenna connection.
• Check whether the batteries are working. Replace if necessary.
• Clean the remote control sensor lens on the monitor.
• Operating range between TV and the remote control should not be more than approximately twenty feet.
• You can still use the buttons on the top of your TV.
• Check if the remote control is in the correct mode.
Control of accessory
devices
• The infrared signals of the screen may influence the reception sensibility of other peripherals Solution:
replace the batteries of the remote control of other devices. E.g. keep away a wireless headphone from
within a radius of approximately four feet.
The software will not
install
Possibly the operating system is wrong.
Go to www.philips.com/usasupport to see which operating systems are supported.
PC modes do not
work
• Check whether connections are correct.
• Check whether the source is correctly selected. Press AV button to select the correct source.
• Check whether you have configured the computer on a compatible display resolution.
Standby
Your TV consumes energy less than 2w in the standby mode.
After improper
shutdown
If your TV has been shutdown in an improper way (e.g. power drop, power cord plug out), starting up the
TV again will take a longer time than usual.
Miscellaneous
See Extras, Specifications on this user manual.
Downloaded From TV-Manual.com Manuals
23
Glossary
Aspect Ratio
The ratio between the width and height of the TV picture on the screen. In a normal TV set the aspect
ratio is 4 to 3 (4:3). The new aspect ratio in HDTV is 16:9 which resembles the aspect ratio in a movie
theatre (Widescreen). New TV systems support both 4:3 and 16:9 aspect ratio and can automatically
switch between them.
Audio Video (A/V)
A term often used when discussing a channel on a TV receiver or on video equipment, which has been
especially designed to accept VCR audio-video signals. This channel automatically activates special circuitry
within the TV set to prevent picture distortion and skewing. It is also used for audio-video processors,
which handle both types of signals.
CVBS
Composite Video Baseband Signal. In broadcast television this refers to the video signal, including the colour information and syncs.
Component Video
Input (Y Pb Pr)
Component Video Input is a type of connection that uses a cinch-type connector to allow set top boxes
or analog DVD players to connect a signal to the TV. By offering the cinch-type input (YPbPr) the primary
colors, red, green and blue are connected from a set top box directly into the TV allowing for the signal to
display on the screen.
HDTV
The generally agreed upon definition of HDTV is approximately twice the vertical and
horizontal picture resolution of today’s NTSC TV, which essentially makes the picture twice as sharp.
HDTV also has a screen ratio of 16:9 as compared with most of today’s TV screens, which have a screen
ratio of 4:3. HDTV offers reduced motion artifacts (i.e. ghosting, dot crawl).
PAL
Phase Alternating Line, is color encoding system used in broadcast television systems in large parts of the
world. PAL was developed by Telefunken in Germany.
Progressive Scan
In Progressive Scanning all the horizontal scan lines are scanned on to the screen at one time. The Digital
TV and HDTV Standards accept both Interlaced Scan and Progressive Scan broadcast and display methods.
Resolution
Resolution: A measurement of the finest (smallest) detail that is visible in a video image. TV Resolutions
may be expressed as number of pixels in an image; or more commonly,
As Total Number of (horizontally scanned) Lines used to create the image.
Standard Digital TV Resolutions:
SDTV: 480i - The picture is 704x480 pixels, 480p - The picture is 704x480 pixels.
HDTV: 720p - The picture is 1280x720 pixels, 1080i - The picture is 1920x1080 pixels,
1080p - The picture is 1920x1080 pixels.
SPDIF
SPDIF (Sony and Philips Digital Interconnect Format) is highly recommended for high quality digital sound
output.
Downloaded From TV-Manual.com Manuals
24
Care And Cleaning
WARNING concerning stationary images on the TV
Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the LCD
panel. Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do
not leave moving images on screen for extended periods of time. Do not display the same images too frequently; if you
do, subtle “ghost” images can be left on the LCD screen. Sources of stationary images may be Laser discs, video games,
Compact Discs Interactive (CD-i), paused Digital Video Discs (DVDs) or video tapes.
Here are some common examples of stationary images:
• DVD menus list DVD content.
• Letter box black bars that appear at the top and bottom of the TV screen when a wide screen (16:9) movie is viewed
on a TV with standard (4:3) aspect ratio. This occurs with some DVDs.
• Video game images and scoreboards
• Television station logos cause a problem if they are bright and stationary. Moving or low-contrast graphics are
less likely to damage the picture tube.
• Stock market tickers may appear at the bottom of the TV screen if the TV programming covers this news.
• Shopping channel logos, pricing displays may be bright and may appear constantly during the show.
These usually appear in the same location on the TV screen.
TV Location
• To avoid cabinet warping, cabinet color changes, and an increased chance of TV failure, do not place the TV
where temperatures can become excessively hot -- for example, in direct sunlight or near a heating appliance.
• Allow a free flow of air around the TV.
Cleaning
• To avoid possible shock hazard, remove the TV’s power cord from the electrical outlet before cleaning.
• Regularly dust the TV with a dry, non-scratching duster.
• When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using
anything abrasive. Do not use household cleaners. Wipe the screen with a clean cloth dampened with water.
Use even, easy, vertical strokes when cleaning.
• Occasionally vacuum the vents on the rear of the TV.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet. They may permanently blemish
the cabinet.
Downloaded From TV-Manual.com Manuals
25
Specification - TV
20PFL4122
PICTURE/ DISPLAY
Aspect ratio
Picture Enhancement
4:3
Progressive Scan, 2D Comb Filter, Noise Reduction, Smart Picture (5 modes)
SOUND
Output Power (RMS)
Sound Enhancement
Sound Mode
2x3W
Incredible Surround
Dual I/II, Nicam, Smart Sound (5 modes)
CONVENIENCE
Auto Store, Full text, Sleep timer, Clock
ON SCREEN DISPLAY
LANGUAGE
English, Simplified Chinese (/93 model)
English, Simplified Chinese, Thai, Arabic (/79/98 model)
CONNECTIVITY
Bottom
AC IN
DVI-D - Digital video interface, Audio input (shared w/ PC)
PC IN - D-SUB, Audio input
CVI - Component (YPbPr), Audio L/R input
75Ω/RF
Side AV - Audio L/R input, Video input, S-video
Earphone
Side
WEIGHT &
DIMENSIONS:
Weight (incl. Packaging):
Weight (excl. Packaging):
Carton Dimension
(WxHxD):
Product Dimension
(WxHxD)
10.4 kg/22.88 lbs
8.55 kg/18.7 lbs
604 x 222 x 566 mm
23.78” x 8.74” x 22.28”
497 x 472 x 218 mm
19.5” x 18.5” x 8.6”
POWER
Power Consumption
70W
Standby Power Consumption < 2W
Mains Power
100-240V, 60-50Hz
WALL MOUNT:
100x100mm
Metric 4 (10mm) screws are needed
for wall mounting (not included).
100x100mm
400x200mm
Downloaded From TV-Manual.com Manuals
26