GB
COUNTING SCALES/COUNTING SYSTEMS/
SPECIAL STOCKTAKING SCALES
PROFESSIONAL
MEASURING
251 Pcs
2015
KERN Pictograms
Internal adjusting:
Quick setting up of the balance‘s ­
accuracy with internal adjusting weight
(motor­driven).
Recipe level A:
Separate memory for the weight of
the tare container and the recipe
ingredients (net total).
Suspended weighing:
Load support with hook on the underside
of the balance.
Adjusting program CAL:
For quick setting up of the balance‘s
accuracy. External adjusting weight
required.
Recipe level B:
Internal memory for complete recipes
with name and target value of the recipe
ingredients. User guidance through
display.
Battery operation:
Ready for battery operation. The battery
type is specified for each device.
Memory:
Balance memory capacity, e.g. for
article data, weighing data, tare weights,
PLU etc.
Recipe level C:
Internal memory for complete recipes
with name and target value of the recipe
ingredients. User guidance through
display. Additional convenient functions,
such as barcode and back calculation
functions.
Rechargeable battery pack:
Rechargeable set.
RS-485 data interface:
To connect the balance to a printer, PC
or other peripherals. High toler­ance
against electromagnetic disturbance.
Totalising level A:
The weights of similar items can ­
be added together and the total
can be printed out.
Power supply:
Integrated in balance. 230V/50Hz
standard EU. More standards e.g.
GB, AUS or USA on request.
USB data interface:
To connect the balance to a printer,
PC or other peripherals.
Totalising level C:
Internal memory for complete recipes ­
with name and target value of the
recipe ingredients. User guidance
through display. Additional convenient
functions, such as barcode and back
calculation.
Strain gauges:
Electrical resistor on an elastic
deforming body.
WLAN data interface:
To transfer data from the balance to
a printer, PC or other peripherals.
Percentage determination:
Determining the deviation in % from
the target value (100 %).
Electromagnetic force compen­sation:
Coil inside a permanent magnet. For the
most accurate weighings.
Control outputs
(optocoupler, digital I/O):
To connect relays, signal lamps,
valves, etc.
Weighing units:
Can be switched to e.g. nonmetric units
at the touch of a key. See balance model.
Please refer to KERN‘s website for more
details.
Single cell technology:
Advanced version of the force compensation principle with the highest level of
precision.
Interface for second balance:
For direct connection of a second
balance.
Weighing with tolerance range:
Upper and lower limiting values can be
pro­grammed individually for e.g. dosing,
sorting and portioning.
Verification possible:
The time required for verification is
specified in the pictogram.
Network interface:
For connecting the scale to an Ethernet
network. With KERN products you can
use a universal RS-232/LAN converter.
Vibration-free weighing:
(Animal weighing program)
When the weighing conditions are un­
stable, a stable weight is calculated as
an average value.
DAkkS calibration possible:
The time required for DAkkS calibration is
shown in days in the pictogram.
GLP/ISO log:
The balance displays the weight,
date and time, regardless of a printer
connection.
Protection against dust and water
splashes IPxx:
The type of protection is shown in the
pictogram. For details see the glossary.
Package shipment:
The time required for internal shipping
preparations is shown in days in the
pictogram.
GLP/ISO log:
With weight, date and time. Only with
KERN printers, see “Accessories”
ATEX explosion protection:
Suitable for use in hazardous industrial
environments, in which there is explosion
danger. The ATEX marking is specified
for each device.
Pallet shipment:
The time required for internal shipping
preparations is shown in days in the
pictogram.
Piece counting:
Reference quantities selectable.
Display can be switched from piece
to weight.
Stainless steel:
The balance is protected against
corrosion.
Warranty:
The warranty period is shown in the
pictogram.
Data interface RS-232:
To connect the balance to a printer,
PC or network.
Bluetooth data interface:
To transfer data from the balance to
a printer, PC or other peripherals.
Mains adapter:
230V/50Hz in standard version for EU.
On request GB, AUS or USA version
available.
Tuning fork principle:
A resonating body is electromagnetically
excited, causing it to oscillate.
KERN – measuring technology and testing services from a single source
Balances & Test service
catalogue
Medical scales
catalogue
Microscopes & refractometers
catalogue
SAUTER measuring
equipment catalogue
Provides a complete overview of
the KERN line of balances, test
weights, and services.
Complete line of medical scales,
from infant scales to profession­
al patient scales, chair scales
and adiposity scales, as well as
innovative hand grip dynamo­
metres, chemist’s balances, and
veterinary scales.
Extensive range in the area of
optical instruments, such as, for
example, biological microscopes,
stereo microscopes, metallurgi­
cal microscopes, polarisation
microscopes as well as analogue
and digital refractometers.
Test instruments for industry and
commerce, such as force, coating
thickness, material ­thickness,
and hardness measuring systems.
DE
DAkkS-Kalibrierservice
Waage, Prüfgewicht, Kraft … und mehr
KERN & Sohn
EIN ZWERG
SUCHT
SEIN GEWICHT
GmbH
seit 1844
und Gewichtefabrik
1844
Feinwaagen
Balances since
of Precision
Älteste europäische
Manufacturer
Oldest European
akkreditiert
durch die /
Deutsche
accredited
by the
e GmbH
rungsstell
Akkreditie
rium im / as
calibration
als Kalibrierlaborato
Deutschen
laboratory
in the
Sample
Kalibrierzeiche
Calibration
certificate
Gewichtssatz,
Klasse E2
Gegenstand
Object
Set of weights,
Class E2
1 mg - 1 kg
1 mg - 1 kg
GmbH
KERN & Sohn
Ziegelei 1
D-72336 Balingen
Hersteller
Manufacturer
Germany
313-052
Typ
Type
Fabrikate/Serien-
Nr.
Serial number
GmbH
Customer
2014-123456789
Auftragsnummer
Order No.
Anzahl der
Seiten des
Kalibrierscheines
2014-05
mark
documents
certificate
which realize
standards,
This calibration
to the
to national
according
traceability
of measurement (SI).
Units
the units
multilateral
System of
International is signatory to the
for
The DAkkS of the European co-operation
International
agreements (EA) and of the
(ILAC) for
Cooperation
Accreditation
Accreditation calibration certificates.
of
Laboratory
the object
recognition
to have
the mutual
is obliged
intervals.
The user
at appropriate
recalibrated
G123456789
Mustermann
Auftraggeber
n
die
dokumentiert zur
Normale
Dieser Kalibrierschein
auf nationale
ÜberRückführung der Einheiten in
Internationalen
Darstellung
mit dem
einstimmung
(SI).
der multiEinheitensystem
ist Unterzeichner
der European
Die DAkkS
Übereinkommen
(EA) und
lateralen
for Accreditation
Accreditation
co-operation
Laboratory
gegenseitigen
der International
(ILAC) zur
Cooperation der Kalibrierscheine.
Anerkennung
einer angemessenen
ist
der Kalibrierung
Für die Einhaltung
Frist zur Wiederholung
verantwortlich.
der Benutzer
the
Kalibrierschein
Calibration
☞ Das Reisetagebuch
D-K19408-01-00
enst
Kalibrierdi
3
Kern – 1844 bis heute
Gottl. Kern & Sohn, Feinwaagen- und Gewichtefabrik – ein Unternehmen schreibt Geschichte.
PROFESSIONAL MEASuRINg
the certificate
pages of
- 22.05.2014
bedürfen der
ms.
oder Änderungen
Kalibrierung 07.05.2014
Kalibrierlaboratoriu
werden. Auszüge
weiterverbreitet auch des ausstellenden
und unverändert le GmbH als
darf nur vollständigAkkreditierungsstel
of both the are not valid.
Deutschen
Gültigkeit. except with the permission
Dieser Kalibrierschein
without signature
sowohl der
haben keine
in full
certificates
Genehmigung ohne Unterschrift reproduced other than
Calibration
may not be and the issuing laboratory.
Kalibrierscheine
certificate
Number of
Datum der
Date of calibration
GmbH
This calibration
Akkreditierungsstelle
Deutsche
Datum
Date
27.05.2014
KERN & Sohn
Kalibrierlaboratoriums
laboratory
Leiter des
calibration
Head of the
Bearbeiter
Person responsible
Rocco Scaramuzzo
Grunenberg
Balingen,
1, D-72336
49
GmbH, Ziegelei
+49-7433-9933-1
Phone +49-7433-99330,
Germany
Sec: [1da70]
3)
QXC169 (rev
Fax
KERN DAkkS calibration
service brochure
KERN branch prospectuses
The gnome guide
170 years of KERN
Detailed information on topics
pertaining to the calibration of
balances, test weights, and force
measuring devices.
Compact overview of the best­
sellers for many different lines of
business – just the balances your
customers need!
Travel report from KERN, the
famous scientific gnome, who
travelled all over the world, in
­order to illustrate the physical
law of gravitational force. Ideal
for use in school education –
please request, it’s free of charge.
Interesting and readable overview
of the history of the origins of
Southern German balance manu­
facturing, as well as the company
history, which stretches right
back to 1770 – please request,
it’s free of charge.
Your advantages
Quick Delivery
Items in stock are sent the same
day if orders are placed before
1:00 pm (valid for parcel service
delivery within the EC).
Price performance ratio
KERN scales are always an in­
expensive alternative. They are
durable, uncomplicated and easy
to place into operation.
3 years warranty
Items under € 400,–
No stock-keeping necessary.
KERN does the warehousing for you.
Direct dispatch
of ordered goods to your customer is
available, with personalised delivery
note if desired (please ask), invoice will
be issued to you (third party business).
Sale or return
within 14 days of purchase.
Counting scales / Counting systems / Special stocktaking scales
SMT
Innovative stocktaking scale with touchscreen to
efficiently measure beverage residuals in bottles and
information transfer to the PC
89
94
IFS
Industrial counting scale with convenient keypad for
easy data entry - now also with EC type approval [M],
counting resolution up to 75,000 points
90
CXB-N
Entry level model in professional counting, also with EC
type approval [M], counting resolution of 30,000 points
95
CDS
Easy to use industrial counting scale for heavy loads,
counting resolution up to 300,000 points
CPB
Professional model, also with EC type approval [M],
counting resolution up to 60,000 points
91
CCS
Counting system to count very small parts in largest
quantities, counting resolution up to 999,999 points
96
CFS
Professional, high-resolution counting scale with
100 item memories and second balance interface,
counting resolution up to 75,000 points
92
FKA
Stocktaking scale with touchscreen to quickly
measure the quantity of stock items and information
transfer to the PC
98
93
CKE
Easy to use, self-explanatory counting scale with laboratory
accuracy, counting resolution up to 360,000 points
99
FKC
High-resolution stocktaking counting system with
touchscreen to quickly measure the quantity of stock
items and information transfer to the PC
Counting, doing it right!
Which counting scale for which application?
For counting correctly a few parameters need to be taken
account when selecting a counting scale.
Simple counting scale
with self-explanatory user guidance on the keyboard. The
graphic control panel enables you to start working immediately, without having to consult the user manual. Easy
handling, value for money.
Minimum piece weight
Smallest piece the scale will accept for piece counting and
piece count display. In practice, depending on the required
accuracy, we recommend you choose a counting scale
with a minimum piece weight is smaller than the weight the
item to be counted.
➔ Counting resolution
Describes the maximum quantity which can be counted with
a counting accuracy of 1 %, with a minimum variation
of item weights and a sufficiently large reference quantity
(20 pieces with counting resolution ≤ 60,000 points, 50
pieces from 60,000 – 150,000 points, 100 pieces ≥ 150,000
points). This therefore is an indication of the quality of the
counting scale.
Recommended ➔ reference quantity
Weight tolerances of pieces to be counted are the the most
significant sources of error when counting. Therefore, at
the start of every counting procedure, establish an average
weight, the so-called reference weight, by placing several
pieces on the scale, the so-called reference quantity.
Usually this would be:
5pieces
10pieces
20 – 100pieces
>> often sufficient
>> common practise
>>for large deviations among piece
weights
The “automatic ➔ reference optimisation” function
increases the reference quantity gradually, whereby the
average piece weight is optimised step by step. This
contributes considerably to the accuracy of the subsequent counting processes.
Professional counting scale
with 3 separate displays for reference weight (average
weight of the pieces), total weight of all pieces and total
quantity of all pieces. Very useful integrated memories,
e.g. for container weight, item number, reference weight
as well as audible and visual counting aids and an alphanumeric key pad for easy data entry.
Special tip for counting large quantities:
Counting systems
The weighing ranges of bench counting scales are often not
sufficient to count large quantities, units, palletized items,
etc. Here high-performance counting systems come into
operation, as these combine a high-precision reference
scale with a high-capacity bulk scale.
Special stocktaking scales SMT, FKA and FKC
For demanding quantity measurement, e.g. as part of a
stocktake. With its easy-to-use touch screen, special
stocktaking software and PC connection this makes it
quicker to collect and analyse stock levels
➔ See the glossary on page 191 – 192
Your KERN product specialist will be happy to help:
Tanja Jetter
Product specialist Counting scales
Tel.+49 [0] 7433 9933 - 168
Fax+49 [0] 7433 9933 - 29168
tanja.jetter@kern-sohn.com
87
Quick-Finder Counting scales / Counting systems / Special stocktaking scales
Weighing
range
Readout
[d]
10
0,001 g
0,001 g
0,001 g
0,001 g
0,001 g
0,001 g
0,01 g
0,01 g
0,01 g
0,01 g
0,01 g
0,01 g
0,01 g
0,01 g
0,01 g
0,01 g
0,01 g
0,01 g
0,01 g
0,01 g
0,02 g
0,02 g
0,05 g
0,05 g
0,05 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 g
0,1 | 0,2 g
0,2 g
0,2 g
0,2 g
0,2 g
0,2 g
0,2 g
0,2 g
0,2 | 0,5 g
0,5 g
0,5 g
0,5 g
0,5 g
0,5 g
0,5 | 1 g
1g
1g
1g
1g
1 | 2 g
1 | 2 g
1 | 2 g
2g
2g
2 | 5 g
2 | 5 g
2 | 5 g
5g
5 | 10 g
5 | 10 g
10 g
10 | 20 g
20 | 50 g
50 | 100 g
88
[Max]
0,3 kg
0,36 kg
6 kg
15 kg
36 kg
65 kg
2 kg
3 kg
3,6 kg
30 kg
60 kg
150 kg
300 kg
36 kg
60 kg
65 kg
150 g
600 kg
600 kg
3000 kg
4 kg
6 kg
8 kg
15 kg
16 kg
6 kg
6 kg
16 kg
16 kg
30 kg
30 kg
36 kg
36 kg
60 kg
60 kg
150 kg
150 kg
300 kg
1500 kg
1500 kg
3000 kg
6 | 15 kg
3 kg
15 kg
15 kg
36 kg
60 kg
65 kg
65 kg
12 | 30 kg
6 kg
30 kg
30 kg
65 kg
100 kg
30 | 60 kg
3 kg
10 kg
15 kg
50 kg
3 | 6 kg
3 | 6 kg
75 | 150 kg
6 kg
30 kg
6 | 15 kg
6 | 15 kg
150 | 300 kg
15 kg
15 | 30 kg
15 | 30 kg
30 kg
30 | 60 kg
60 | 150 kg
150 | 300 kg
Model
KERN
CFS 300-3
CKE 360-3
CCS 6K-6
CCS 10K-6
FKC 30K-6
FKC 60K-6
CKE 2000-2
CFS 3K-5
CKE 3600-2
CCS 30K0.01
CCS 60K0.01
CCS 150K0.01
CCS 300K0.01
FKC 30K-5
CCS 60K0.01L
FKC 60K-5
CCS 150K0.01L
CCS 600K-2L
CCS 600K-2
CCS 3T-1L
CDS 4K0.02
CKE 6K0.02
CKE 8K0.05
CDS 15K0.05
CKE 16K0.05
CPB 6K0.1N
CFS 6K0.1
CKE 16K0.1
CDS 16K0.1
CDS 30K0.1
CCS 30K0.1
CKE 36K0.1
FKA 30K-4
CCS 60K0.1
CCS 60K0.1L
CCS 150K0.1
CCS 150K0.1L
CCS 300K0.1
CCS 1T-1
CCS 1T-1L
CCS 3T-1
IFS 10K-4
CXB 3K0.2
CPB 15K0.2N
CFS 15K0.2
CDS 36K0.2L
CDS 60K0.2
CKE 65K0.2
FKA 60K-4
IFS 30K0.2DL
CXB 6K0.5
CPB 30K0.5N
CFS 30K0.5
CKE 65K0.5
CDS 100K0.5
IFS 60K0.5D
CXB 3K1NM
SMT 10K-3
CXB 15K1
CFS 50K-3
CPB 6K1DM
IFS 6K-3M
IFS 100K-3
CXB 6K2NM
CXB 30K2
CPB 15K2DM
IFS 10K-3M
IFS 300K-3
CXB 15K5NM
CPB 30K5DM
IFS 30K-3M
CXB 30K10NM
IFS 60K-2M
IFS 100K-2M
IFS 300K-2M
Price
excl. of VAT
ex works
€
350,370,670,710,1280,1280,350,290,370,580,580,650,840,1260,660,1260,850,1850,1450,1990,560,500,460,490,560,225,270,460,460,560,570,510,950,550,610,610,820,810,1390,1890,1950,370,220,225,270,650,660,510,950,430,220,225,270,480,660,430,235,950,220,290,225,410,560,235,220,225,410,700,235,225,460,235,460,550,460,-
Page
92
93
96
96
99
99
93
92
93
96
96
96
96
99
96
99
96
96
96
96
95
93
93
95
93
91
92
93
95
95
96
93
98
96
96
96
96
96
96
96
96
94
90
91
92
95
95
93
98
94
90
91
92
93
95
94
90
89
90
92
91
94
94
90
90
91
94
94
90
91
94
90
94
94
94
Counting scales / Counting systems / Special stocktaking scales
ready for
shipping
1
1
2
2
2
2
1
1
1
2
2
2
2
2
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
2
1
2
2
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
For an explanation on the pictos, see the front flap
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● = Standard
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
= Option
Bottle stocktaking scale KERN SMT
Innovative stocktaking scale with touchscreen to efficiently
measure beverage residuals in bottles and information
transfer to the PC
Features
•Your advantage: Less time consuming,
compared with the measuring method used
up to now
- Up to now: Generally, the content of a bottle
is established by a visual check, i.e. estimated,
documented manually and then manually
entered into the PC.
- New with KERN SMT: Now you can easily
select drinks and spirits by item name, item
number, autolist or using a barcode scanner,
then you can weigh the bottle, transfer the
results to the PC - and stocktaking is done!
•400 item memories for master data such
as item name, item description, PRE-TARE,
i.e. weight of the empty bottle, max. bottle
content in g, specific weight of liquid etc.
The associated stock list can easily be
generated at the PC
• Easy entering of items at the PC: An excel
list with spirit bottles produced at a PC
can be transferred to the balance using the
software included as standard. Whether in the
bar or in the warehouse, the spirits can be
weighed in their bottles. In Doing so, the
stored bottle weight will be subtracted automatically. After the stocktaking, the results will
be transferred back to the PC where they can
then be processed further as an Excel table
•Determination of beverage inventory
according to an internal stock list
• Selecting the spirit: During stocktaking,
the beverage to be registered can be
selected using item name, item number,
autolist or using a barcode scanner
Technical data
•Backlit LCD graphic display with digit height
13 mm, screen diagonal 4,3" (approx. 109 mm)
•Weighing plate dimensions, stainless steel,
WxD 160x200 mm
•Overall dimensions WxDxH 180x310x85 mm
•Rechargeable battery pack internal,
standard, operating time up to 12 h without
backlight, charging time approx. 10 h
•Net weight approx. 2,7 kg
•Permissible ambient temperature 10 °C / 40 °C
Accessories
•Protective working cover over keyboard
and housing, standard, can be retrofitted,
KERN 572-A02, € 25,• Volume kit for determining the specific
weight of beverages, scope of delivery:
precision balance KERN EMB 600-2, beaker,
pipette, KERN SMT-A05, € 350,-
STANDARD
Model
KERN
SMT 10K-3
Modes
Weighing
Determination stock level
Functions
•Capacity display with ,
•PRE-TARE from the memory unit with ,
•Date/time with ,
•GLP printout with ,
•Data transfer of stock items from PC
→ Stocktaking scale from Excel list with
•Transfer of the stocktake information from
stocktaking scale → PC as an Excel list
with
•Selection of stock location and user with
•Barcode scanner, table-top version,
dimensions WxDxH 230x150x135 mm,
KERN SMT-A02, € 685,•Barcode scanner, hand-held version,
dimensions WxDxH 235x210x115 mm,
KERN SMT-A03, € 445,•Radio barcode scanner, hand-held version,
dimensions WxDxH 225x220x110 mm,
KERN SMT-A04, € 495,-
OPTION
Weighing range
Readout
Reproducibility
Linearity
[Max]
g
10000
[d]
g
1
g
0,5
g
± 0,5
Price
excl. of VAT
ex works
€
950,-
Option
DAkkS Calibr. Certificate
KERN
963-128
€
88,-
Laptop and decorative items not within the scope of delivery
Details: www.kern-sohn.com/en/SMT · Order hotline +49 [0] 7433 9933 - 0
Counting scales / Counting systems / Special stocktaking scales
89
10
Counting scale KERN CXB
Note: Official verification duty for commercial trade
Entry level model into professional counting, also with EC
type approval [M], counting resolution of 30,000 points
10
Features
•Precise counting: The automatic reference
weight optimisation gradually improves the
average value of the piece weight
•Programmable using numerical key pad:
- required reference quantity
- known reference weight
•Three displays for
- Total weight (verifiable)
- Piece weight
- Total count
•Audible Fill-to-target: target quantity or
target weight can be programmed. When the
target value is reached, a signal will sound
•Counting results memory: adds up all
individual piece counts, result is shown in
total weight and total pieces
•Energy management: Backlight turns off
after 5 sec
•Soil-resistant construction with water
channels at the edge of the housing and
sealing rings over the upper housing inlets
•PRE-TARE function for manual subtraction
of a known container weight, value can be
saved
Technical data
•Large backlit LCD displays, digit height
18 mm
STANDARD
OPTION
•Weiging plate dimensions, stainless steel
WxD 300x225 mm
•Dimensions housing WxDxH
300x330x110 mm
•Rechargeable battery pack internal,
standard, operating time up to 200 h
without backlight, charging time approx. 8 h
•Net weight approx. 4 kg
•Permissible ambient temperature
-10 °C / 40 °C
Accessories
•Protective working cover over keyboard
and housing, standard, can be retrofitted,
KERN CXB-A01, € 25,-
FACTORY
only
CXB-NM
Options
Price
Counting
Min. piece
Readout Verification Minimum
Weighing
Verification
DAkkS Calibr. Certificate
resolution excl. of VAT
weight
load
value
range
[Min]
[e]
[d]
[Max]
[Counting]
ex works
g
g
g
kg
€
Points
g/piece
KERN
€
€
KERN
KERN
3
0,2
–
–
0,1
30.000
–
–
963-127
72,CXB 3K0.2
220,CXB 6K0.5
6
0,5
–
–
0,2
30.000
220,–
–
963-128
88,CXB 15K1
15
1
–
–
0,5
30.000
220,–
–
963-128
88,30
2
–
–
1
30.000
–
–
963-128
88,CXB 30K2
220,Note: For applications that require verification, please order verification at the same time, initial verification at a later date is not possible.
Verification at the factory, we need to know the full address of the location of use.
3
1
1
20
0,1
30.000
965-227
55,963-127
72,235,CXB 3K1NM
6
2
2
40
0,2
30.000
965-228
55,963-128
88,235,CXB 6K2NM
15
5
5
100
0,5
30.000
965-228
55,963-128
88,235,CXB 15K5NM
30
10
10
200
1
30.000
965-228
55,963-128
88,235,CXB 30K10NM
Model
90
New model
Counting scales / Counting systems / Special stocktaking scales
Details: www.kern-sohn.com/en/CXB · Order hotline +49 [0] 7433 9933 - 0
Counting scale KERN CPB
Professional model, also with EC type approval [M],
counting resolution up to 60,000 points
Features
•Precise counting: The automatic reference
weight optimisation gradually improves the
average value of the piece weight
•Programmable using numerical key pad:
- required reference quantity
- known reference weight
•Three displays for total weight (verifiable),
piece weight, total count
•Counting results memory: adds up all
individual piece counts, result is shown in
total weight and total pieces
•Audible Fill-to-target: target quantity or
target weight can be programmed, e.g. for
checkweighing. When the target value is
reached, a signal will sound
Note: Official verification duty for
commercial trade
• High mobility: thanks to battery operation
(optional), compact, flat construction and
low weight, it is suitable for use in several
locations (production, warehouse, dispatch
department, ...)
Technical data
•Large backlit LCD displays, digit height
20 mm
•Weighing plate dimensions, stainless steel,
WxD 294x225 mm
•Overall dimensions WxDxH
320x350x125 mm
•Net weight approx. 3,3 kg
•Permissible ambient temperature 0 °C / 40 °C
STANDARD
OPTION
Accessories
10
•Protective working cover,
KERN CFS-A02, € 25,•Rechargeable battery pack internal,
operating time up to 90 h without backlight,
charging time approx. 12 h, can be
retrofitted, KERN GAB-A04, € 40,• Signal lamp for visual support of weighing
with tolerance range, for details see page 160,
KERN CFS-A03, € 250,•Y cable for parallel connection of two terminal
devices to the RS-232 interface on the
scale, e.g. signal lamp and printer, for
details see page 160, KERN CFS-A04, € 35,•Suitable printers and an extensive
accessories range, see page 157 ff.
FACTORY
only
CPB-DM
Model
KERN
CPB 6K0.1N
CPB 15K0.2N
CPB 30K0.5N
CPB 6K1DM
CPB 15K2DM
CPB 30K5DM
Option
Price
Min. piece
Minimum
Verification
Readout
Weighing
Verification
DAkkS Calibr. Certificate
excl. of VAT
weight
load
value
range
[Min]
[e]
[d]
[Max]
[Counting]
ex works
g
g
g
kg
€
g/piece
€
€
KERN
KERN
6
0,1
–
–
0,1
–
–
963-128
88,225,15
0,2
–
–
0,25
225,–
–
963-128
88,30
0,5
–
–
0,5
–
–
963-128
88,225,Note: For applications that require verification, please order verification at the same time, initial verification at a later date is not possible.
Verification at the factory, we need to know the full address of the location of use.
Dual-range scale switches automatically to the next largest weighing range [Max] and readout [d].
3|6
1|2
1|2
20
0,1
965-228
55,963-128
88,225,6 | 15
2|5
2|5
40
0,25
965-228
55,963-128
88,225,15 | 30
5 | 10
5 | 10
100
0,5
225,965-228
55,963-128
88,-
Details: www.kern-sohn.com/en/CPB · Order hotline +49 [0] 7433 9933 - 0
Counting scales / Counting systems / Special stocktaking scales
91
Counting scale KERN CFS
Professional, high-resolution counting scale with 100 item memories
and second balance interface, counting resolution up to 75,000 points
10
Features
•Memory for 100 items with additional text,
reference weight and tare weight, e.g. of a
container
•Precise counting: The automatic reference
weight optimisation gradually improves the
average value of the piece weight
•Programmable using numerical key pad:
- required reference quantity
- known reference weight
•Weighing with tolerance range
(checkweighing), ideal for portioning,
dispensing, grading, only in weiging &
counting mode
•Fill-to-target function: Programmable
target quantity or target weight. An acoustic
and visual signal will be displayed when the
target value is reached
•Second balance interface to construct a
high-resolution counting system, standard,
e.g. with weighing bridges KERN KFP V20
(see page 138)
Technical data
•Large backlit LCD displays, digit height
20 mm
•Weighing plate dimensions
Ø 80 mm
WxD 294x225 mm, see enlarged picture
WxD 370x240 mm
•Overall dimensions WxDxH
320x350x180 mm (incl. draft shield)
320x350x125 mm
370x360x125 mm
•Permissible ambient temperature 0 °C / 40 °C
STANDARD
•Protective working cover over keyboard
and housing standard, can be retrofitted,
only for models with weighing plate size ,
KERN CFS-A02, € 25,•Rechargeable battery pack internal,
operating time up to 70 h without backlight,
charging time approx. 14 h, can be
retrofitted, KERN GAB-A04, € 40,•Signal lamp for visual support of weighing
with tolerance range, WxDxH
100x180x300 mm, KERN CFS-A03, € 250,•Y cable for parallel connection of two terminal
devices to the RS-232 interface on the
scale, e.g. signal lamp and printer,
KERN CFS-A04, € 35,•Suitable printers and an extensive
accessories range, see page 157 ff.
OPTION
Model
KERN
CFS 300-3
CFS 3K-5
CFS 6K0.1
CFS 15K0.2
CFS 30K0.5
CFS 50K-3
92
Accessories
Weighing range
Readout
Reproducibility
[Max]
kg
0,3
3
6
15
30
50
[d]
g
0,001
0,01
0,1
0,2
0,5
1
g
0,002
0,02
0,1
0,2
0,5
1
Min. piece
weight
[Counting]
g/piece
0,005
0,05
0,1
0,2
0,5
1
Counting scales / Counting systems / Special stocktaking scales
Net weight
approx.
kg
2,5
3,3
3,3
3,3
3,3
5,5
Weighing
plate
Price
excl. of VAT
ex works
€
350,290,270,270,270,290,-
Option
DAkkS Calibr. Certificate
KERN
963-127
963-127
963-128
963-128
963-128
963-128
€
72,72,88,88,88,88,-
Details: www.kern-sohn.com/en/CFS · Order hotline +49 [0] 7433 9933 - 0
Counting scale KERN CKE
Easy to use, self-explanatory counting scale with laboratory
accuracy, counting resolution up to 360,000 points
Features
•Self-explanatory graphic control panel,
counting process can be understood immediately, even without operating instructions
- no learning time = reduces costs
- ideal for untrained users
- visualised process avoids operating errors
avoids
•The 4 steps are carried out from left to right:
Place the empty container onto the weighing
plate and tare by pressing the TARE key
Place the reference quantity for the goods
to be counted into the container (5, 10, or 20
pieces)
Confirm the selected reference quantity by
pressing the key (5, 10 or 20)
Pour in the goods to be counted. The
number of pieces will immediately be shown
in the display
•Precise counting: The automatic reference
weight optimisation gradually improves the
average value of the piece weight
•Two scales in one: Switching from
counting mode to weighing mode at the
touch of a key
Technical data
•Large backlit LCD display
, digit height 9 mm
digit height 18 mm
•Dimensions of weighing plate
(stainless steel*)
Ø 81 mm
WxD 150x170 mm*
WxD 340x240 mm*, see larger picture
•Overall dimensions WxDxH
, 167x250x85 mm
350x390x120 mm
•Optional battery operation for models with
weighing plate size , batteries 6 x 1.5 V
Size C not standard, operating time up to 40 h
STANDARD
Model
KERN
CKE 360-3
CKE 2000-2
CKE 3600-2
CKE 6K0.02
CKE 8K0.05
CKE 16K0.05
CKE 16K0.1
CKE 36K0.1
CKE 65K0.2
CKE 65K0.5
OPTION
Weighing range
Readout
[Max]
kg
0,36
2
3,6
6
8
16
16
36
65
65
[d]
g
0,001
0,01
0,01
0,02
0,05
0,05
0,1
0,1
0,2
0,5
Min. piece
weight
[Counting]
g/piece
0,001
0,01
0,01
0,02
0,05
0,05
0,1
0,1
0,2
0,5
Details: www.kern-sohn.com/en/CKE · Order hotline +49 [0] 7433 9933 - 0
Counting
resolution
Points
360.000
200.000
360.000
300.000
160.000
320.000
160.000
360.000
325.000
130.000
Weighing plate
•Net weight for models with weighing plate size
approx. 1 kg
approx. 1,8 kg
approx. 6,5 kg
•Permissible ambient temperature 10 °C / 40 °C
10
Accessories
•Protective working cover over keyboard
and housing standard, can be retrofitted, for
models with weighing plate size
KERN PCB-A02, € 25,KERN PCB-A05, € 25,KERN FKB-A02, € 25,•Rechargeable battery pack external,
operating time up to 25 hours with backlight,
charging time approx. 10 h,
KERN KS-A01, € 180,•Rechargeable battery pack internal only
for models with weighing plate size and ,
operating time up to 25 hours with backlight,
charging time approx. 10 h, can be retrofitted,
KERN KB-A01N, € 50,•Suitable printers and an extensive
accessories range, see page 157 ff.
Price
excl. of VAT
ex works
€
370,350,370,500,460,560,460,510,510,480,-
Option
DAkkS Calibr. Certificate
KERN
963-127
963-127
963-127
963-128
963-128
963-128
963-128
963-128
963-129
963-129
€
72,72,72,88,88,88,88,88,105,105,-
Counting scales / Counting systems / Special stocktaking scales
93
Counting scale KERN IFS
Industrial counting scale with convenient decimal keypad
for easy data entry - now also with EC type approval [M],
counting resolution up to 75,000 points
Features
10
•Industrial quality: because of its stable
construction and robust design, it is ideal for
continuous use in an industrial environment
•Ergonomic display device with large keypad
and high-contrast LCD display for easy entry
and reading of, e.g., tare weights, reference
weights, limit values etc.
•99 item memories for master data such
as reference weight, reference quantity,
container weight (PRE-TARE) etc.
•Precise counting: The manual reference
weight optimisation gradually improves the
average value of the piece weight
•Totalising of piece counts
Technical data
•Large backlit LCD displays, digit height
16,5 mm
•Weighing plate dimensions, stainless steel,
WxDxH
STANDARD
300x240x110 mm
400x300x128 mm
500x400x137 mm
650x500x142 mm, see enlarged picture
•Dimensions of display device WxDxH
260x150x65 mm
•Cable length of display device approx. 2,5 m
•Permissible ambient temperature 0 °C / 40 °C
Accessories
•Protective working cover standard, can be
reordered, KERN KFB-A02, € 30,• Stand to elevate display device,
height of stand approx. 330 mm,
KERN IFB-A01, € 45,height of stand approx. 600 mm, for models
with weighing plate size and ,
KERN IFB-A02, € 60,•Rechargeable battery pack internal,
operating time up to 40 h, charging time
approx. 12 h, must be ordered at purchase,
KERN KFS-A01, € 35,•Suitable printers see page 157 ff.
OPTION
only IFS-M
only IFS-M
FACTORY
only IFS-M
Options
Price
Verifiction Min. piece Counting Net weight Weighing
Verification
DAkkS Calibr. Certificate
excl. of VAT
plate
resolution
weight
value
[d]
[d]
[Counting]
ex works
approx.
kg
g
€
g
Points
g/piece
KERN
€
€
KERN
KERN
Dual-range scale switches automatically to the next largest weighing range [Max] and readout [d].
IFS 10K-4
 6 | 15
0,1 | 0,2
0,2
75.000
6,5
963-128
88,370,12 | 30
0,2|0,5
0,5
60.000
10
963-128
88,IFS 30K0.2DL
430,30 | 60
0,5|1
1
60.000
10
963-129
105,IFS 60K0.5D
430,30 | 60
0,5|1
1
60.000
16
963-129
105,IFS 60K0.5DL
510, 75 | 150
1|2
2,5
60.000
16
963-129
105,IFS 100K-3
560, 75 | 150
1|2
2,5
60.000
24
963-129
105,IFS 100K-3L
690,150 | 300
2|5
5
60.000
24
963-129
105,IFS 300K-3
700,Note: For applications that require verification, please order verification at the same time, initial verification at a later date is not possible.
Verification at the factory, we need to know the full address of the location of use.
965-228
55,963-128
88,3|6
1|2
1|2
0,1
60.000
6,5
410,IFS 6K-3M
965-228
55,963-128
88, 6 | 15
2|5
2|5
0,2
75.000
6,5
410,IFS 10K-3M
965-228
55,963-128
88, 6 | 15
2|5
2|5
0,2
75.000
10
460,IFS 10K-3LM
965-228
55,963-128
88,15 | 30
5 | 10
5 | 10
0,5
60.000
10
460,IFS 30K-3M
965-229
93,963-129
105,30 | 60
10 | 20
10 | 20
1
60.000
10
460,IFS 60K-2M
965-229
93,963-129
105,30 | 60
10 | 20
10 | 20
1
60.000
16
550,IFS 60K-2LM
965-229
93,963-129
105,60 | 150 20 | 50
20 | 50
2,5
60.000
16
550,IFS 100K-2M
965-229
93,963-129
105,60 | 150 20 | 50
20 | 50
2,5
60.000
24
690,IFS 100K-2LM
965-229
93,963-129
105,150 | 300 50 | 100 50 | 100
5
60.000
24
690,IFS 300K-2M
Model
94
Weighing
range
[Max]
kg
Readout
New model
Counting scales / Counting systems / Special stocktaking scales
Details: www.kern-sohn.com/en/IFS · Order hotline +49 [0] 7433 9933 - 0
Counting scale KERN CDS
•Permissible ambient temperature
10 °C / 40 °C
Easy to use industrial counting scale for heavy loads,
counting resolution up to 300,000 points
Features
•Self-explanatory graphic control panel.
The counting process can be understood
•immediately even without operating
instructions
- No learning time = reduces costs
- Ideal for untrained users
- Visualised process avoids operating errors
•The 4 steps are carried out from left to right:
Place the empty container onto the weighing plate and tare by pressing the TARE key
Place the reference quantity for the goods
to be counted into the container (5, 10, or 20
pieces)
Confirm the selected reference quantity by
pressing the key (5, 10 or 20)
Pour in the goods to be counted. The
number of pieces will immediately be shown
in the display
•Precise counting: The automatic reference
weight optimisation gradually improves the
average value of the piece weight
Technical data
•Backlit LCD display, digit height 18 mm
•Weighing plate dimensions, stainless steel,
WxDxH
228x228x70 mm
308x318x75 mm
450x350x115 mm
•Dimensions of display device WxDxH
225x115x60 mm
STANDARD
Accessories
•Protective working cover over the display
device, standard, can be retrofitted,
KERN DE-A12, € 30,•Wall mount for display device,
KERN DS-A02, € 30,•Mount to fasten the display device to the
platform, KERN DE-A11N, € 35,• Stand to elevate display device, height of
stand approx. 480 mm, KERN DE-A10, € 90,•Rechargeable battery pack external,
operating time up to 15 hours with backlight,
charging time approx. 10 h,
KERN KS-A01, € 180,•Rechargeable battery pack internal,
operating time up to 15 hours with backlight,
charging time approx. 10 h, can be retrofitted,
KERN KB-A01N, € 50,•Suitable printers and an extensive
accessories range, see page 157 ff.
OPTION
only
Model
KERN
CDS 4K0.02
CDS 15K0.05
CDS 16K0.1
CDS 30K0.1
CDS 30K0.1L
CDS 36K0.2L
CDS 60K0.2
CDS 100K0.5
Weighing
range
[Max]
kg
4
15
16
30
30
36
60
100
Readout
[d]
g
0,02
0,05
0,1
0,1
0,1
0,2
0,2
0,5
Min. piece
weight
[Counting]
g/piece
0,02
0,05
0,1
0,1
0,1
0,2
0,2
0,5
Counting
resolution
Points
200.000
300.000
160.000
300.000
300.000
180.000
300.000
200.000
Details: www.kern-sohn.com/en/CDS · Order hotline +49 [0] 7433 9933 - 0
Net weight
Cable length
approx.
kg
5,1
7,5
7,5
7,5
9,5
9,5
9,5
9,5
approx.
m
2
2
2
2
0,6
0,6
0,6
0,6
Weighing
plate
Price
excl. of VAT
ex works
€
560,490,460,560,660,650,660,660,-
Option
DAkkS Calibr. Certificate
KERN
963-127
963-128
963-128
963-128
963-128
963-128
963-129
963-129
€
72,88,88,88,88,88,105,105,-
Counting scales / Counting systems / Special stocktaking scales
95
10
Counting system KERN CCS
10
Quantity scale KERN KFP
Reference scale KERN CFS
Counting system to count very small parts in largest quantities,
counting resolution up to 999,999 points
Features
•This highly accurate counting system
KERN CCS can replace a whole range of
individual counting scales, efficiently and at a
reasonable price
Reference scale KERN CFS:
•The professional KERN CFS counting scale,
which can also be used as a stand-alone
scale, meets the highest demands for
accuracy, weighing range and volume of
items, by beeing connected to a high-capacity
weighing bridge (up to 999.999 pieces)
96
•Programmable using numerical key pad:
- required reference quantity
- known reference weight
•Memory (PLU) for 100 items with
additional text
•Fill-to-target function: Programmable target
weight. An acoustic and visual signal will be
displayed when the target value is reached
•Precise counting: The automatic reference
weight optimisation gradually improves the
average value of the piece weight
•For additional details on the KERN CFS
reference scale, see page 92
Counting scales / Counting systems / Special stocktaking scales
Quantity scale KERN KFP:
•The high-accuracy quantity counting takes
place on the weighing platform (= weighing
bridge) KERN KFP
•Stainless steel weighing plate, painted
steel base with - , see page 97
•Aluminium singlepoint load cell
(1 x 3000 e), dust and spray protection IP65
•For additional details on the KERN KFP
quantity scale, see page 138
Details: www.kern-sohn.com/en/CCS · Order hotline +49 [0] 7433 9933 - 0
Counting system KERN CCS
Technical data
CFS:
•Large backlit LCD displays, digit height 20 mm
•Overall dimensions WxDxH 320x350x125 mm
•Dimensions of weighing plate, stainless steel
CFS 300-3 Ø 80 mm
CFS 3K-5, CFS 6K0.1 LxP 294x225 mm
•Net weight approx. 3,3 kg
KFP:
•Dimensions of weighing plate, stainless steel,
WxDxH
230x230x110 mm
300x240x110 mm
400x300x128 mm
500x400x137 mm
650x500x142 mm
1000x1000x80 mm
1500x1250x80 mm
1500x1500x80 mm
842x1300x90 mm
•Connection cable
- approx. 2,5 m
- approx. 5 m
Accessoires
•Reference scale also available separately,
details see page 92,
KERN CFS 300-3, € 350,KERN CFS 3K-5, € 290,KERN CFS 6K0.1, € 270,•Rechargeable battery pack internal,
operating time up to 70 h without backlight,
charging time approx. 14 h, not for models
CFS 300-3, KERN GAB-A04, € 40,• Signal lamp for visual support of weighing
with tolerance range. Three-colour LED (yellow,
green, red). Overall dimensions WxDxH
100x180x300 mm, details see page 160,
KERN CFS-A03, € 250,-
STANDARD
Information on other high-capacity bulk
scales, such as, for example, pallet scales,
drive-through scales or floor scales is
available on request, for information on
other counting systems with the KERN CFS
reference scale (d = 0.1g), please refer to
the website
•Y cable for parallel connection of two terminal
devices to the RS-232 interface on the balance,
e.g. signal lamp and printer, details see
page 160, KERN CFS-A04, € 35,•Suitable printers and further, extensive
accessories from page 157 ff.
10
OPTION
only CFS
Model
Quantity
scale
KERN
CCS 6K-6
CCS 10K-6
CCS 30K0.01
CCS 30K0.1
CCS 60K0.01
CCS 60K0.01L
CCS 60K0.1
CCS 60K0.1L
CCS 150K0.01
CCS 150K0.01L
CCS 150K0.1
CCS 150K0.1L
CCS 300K0.1
CCS 300K0.01
CCS 600K-2
CCS 600K-2L
CCS 600K-2U
CCS 1T-1
CCS 1T-1L
CCS 1T-1U
CCS 3T-1
CCS 3T-1L
KFP
KFP 6V20M
KFP 15V20M
KFP 30V20M
KFP 30V20M
KFP 60V20M
KFP 60V20LM
KFP 60V20M
KFP 60V20LM
KFP 150V20M
KFP 150V20LM
KFP 150V20M
KFP 150V20LM
KFP 300V20M
KFP 300V20M
KFP 600V20SM
KFP 600V20M
KFU 600V20M
KFP 1500V20SM
KFP 1500V20M
KFU 1500V20M
KFP 3000V20M
KFP 3000V20LM
Weighing
range
[Max]
kg
6
15
30
30
60
60
60
60
150
150
150
150
300
300
600
600
600
1500
1500
1500
3000
3000
Readout
[d]
g
2
5
10
10
20
20
20
20
50
50
50
50
100
100
200
200
200
500
500
500
1000
1000
Weighing Reference
scale
plate
CFS
CFS 300-3
CFS 300-3
CFS 3K-5
CFS 6K0.1
CFS 3K-5
CFS 3K-5
CFS 6K0.1
CFS 6K0.1
CFS 3K-5
CFS 3K-5
CFS 6K0.1
CFS 6K0.1
CFS 6K0.1
CFS 3K-5
CFS 3K-5
CFS 3K-5
CFS 3K-5
CFS 6K0.1
CFS 6K0.1
CFS 6K0.1
CFS 6K0.1
CFS 6K0.1
Weighing
range
[Max]
g
300
300
3000
6000
3000
3000
6000
6000
3000
3000
6000
6000
6000
3000
3000
3000
3000
6000
6000
6000
6000
3000
Readout
[d]
g
0,001
0,001
0,01
0,1
0,01
0,01
0,1
0,1
0,01
0,01
0,1
0,1
0,1
0,01
0,01
0,01
0,01
0,1
0,1
0,1
0,1
0,01
Min. piece
weight
[Counting]
g/piece
0,005
0,005
0,05
0,1
0,05
0,05
0,1
0,1
0,05
0,05
0,1
0,1
0,1
0,05
0,05
0,05
0,05
0,1
0,1
0,1
0,1
0,1
Price
excl. of VAT
ex works
€
670,710,580,570,580,660,550,610,650,850,610,820,840,810,1450,1850,1250,1390,1890,1300,1950,1990,-
Option
DAkkS Calibr. Certificate
KERN
962-128-127
962-128-127
962-128-127
962-128-128
962-129-127
962-129-127
962-129-128
962-129-128
962-129-127
962-129-127
962-129-128
962-129-128
962-129-128
962-129-127
962-130-127
962-130-127
962-130-127
962-130-128
962-130-128
962-130-128
962-132-128
962-132-128
New model
Details: www.kern-sohn.com/de/CCS · Order hotline +49 [0] 7433 9933 - 0
Counting scales / Counting systems / Special stocktaking scales
€
145,145,145,160,160,160,175,175,160,160,175,175,175,160,237,237,237,253,253,253,528,528,-
97
Stocktaking scale KERN FKA
Stocktaking scale with touchscreen to quickly measure the
quantity of stock items and information transfer to the PC
10
Features
•Application-orientated scale-PC system
for rapid and reliable recording of stock
levels, e.g. as part of stocktaking
• Using the software included as standard,
an Excel list produced on a PC with stocktaking
items can be transferred to the scale. In the
warehouse, stocktaking items can then be
weighed, counted and stored by the scale,
while still in their containers. In doing this,
the stored container weight will be subtracted
automatically. After the stocktaking, the stock
level will then be transferred back to the PC,
to then be processed further as an Excel table.
In this way the workload and input effort at
the scale is kept at a minimum and time
efficiency is maximised = cost saving
•Counting with fixed and variable reference
quantities
•Precise counting: The automatic reference
weight optimisation gradually improves the
average value of the piece weight
•High Flexibility: During stocktaking, stored
PRE-TARE can be corrected immediately on the
scale. Items which have not yet been recorded
can easily entered using the scale and then
transferred in the stock level list
•1000 item memories for master data, such as
item number, PRE-TARE (container weight),
reference quantity, refer. weight etc.
•During stocktaking it is possible to print
individual items recorded
Technical data
•Large backlit and touch-sensitive LCD screen
with digit height 18 mm, screen diagonal 5.8"
(approx. 147 mm)
•Dimensions housing WxDxH 350x390x120 mm
•Optional battery operation, 6 x 1.5 V Size C not
included, operating time up to 15 h
•Net weight approx. 6,5 kg
•Permissible ambient temperature
10 °C / 40 °C
STANDARD
•Protective working cover over keyboard
and housing, standard, can be retrofitted,
KERN FKB-A02, € 25,•Rechargeable battery pack external,
operating time up to 20 h without backlight,
charging time approx. 10 h,
KERN KS-A01, € 180,•Barcode scanner, table-top version,
dimensions WxDxH 230x150x135 mm,
KERN SMT-A02, € 685,•Barcode scanner, hand-held version,
dimensions WxDxH 235x210x115 mm,
KERN SMT-A03, € 445,•Radio barcode scanner, hand-held version,
dimensions WxDxH 225x220x110 mm,
KERN SMT-A04, € 495,•Converter cable (RS-232 to USB),
KERN AFH 12, € 85,•Y cable, KERN FKA-A01, € 46,•Suitable printers and an extensive
accessories range, see page 157 ff.
OPTION
Model
KERN
FKA 30K-4
FKA 60K-4 New Model
98
Accessories
Weighing range
Readout
[Max]
kg
36
65
[d]
g
0,1
0,2
Min. piece
weight
[Counting]
g/piece
0,1
0,2
Weighing
plate
mm
340x240
340x240
Price
excl. of VAT
ex works
€
950,950,-
Options
DAkkS Calibr. Certificate
KERN
963-128
963-129
€
88,105,-
Price reduction
Counting scales / Counting systems / Special stocktaking scales
Details: www.kern-sohn.com/en/FKA · Order hotline +49 [0] 7433 9933 - 0
Stocktaking counting system KERN FKC
High-resolution stocktaking counting system with
touchscreen to quickly measure the quantity of stock
items and information transfer to the PC
Features
Technical data Reference balance KB-N
Accessories Reference balance KB-N
•Counting with a reference balance for high
counting accuracy: the highly accurate KERN
counting system FKC can replace a whole
range of individual balances, efficiently and
at a reasonable price. The counting system
consists of an FKA bulk scale (see page 98
for details) and a KB-N reference balance
(see page 26 for details) as well as an
interface cable.
•Application-orientated scale-PC system for
rapid and reliable recording of stock levels, e.g.
as part stocktaking
• Item recognition using the optional barcode scanner is possible.
•Individual printout templates can be stored
for Weighing Mode and Counting Mode. Can ­
be edited directly at the balance or at the PC
•Note: As well as stocktaking, the balance can
be used in many other applications, e.g. as a
weighing scale, commissioning scale or as a
professional counting scale with item memory
for up to 500 items and associated daily totals
memory for each item.
•Large backlit LCD screen with digit height
9 mm
•Weighing plate dimensions Ø/WxD
KB 120-3N: Ø 81 mm
KB 1200-2N: 130x130 mm
•Dimensions housing KB-N:
WxDxH 167x250x85 mm
•Permissible ambient temperature
10 °C / 40 °C
•Protective working cover over keyboard and
housing, standard, can be retrofitted, € 25,KB 120-3N: PCB-A02
KB 1200-2N: PCB-A04
•Rechargeable battery pack external,
operating time up to 15 h without backlight,
charging time approx. 10 h,
KERN KB-A01N, € 50,-
Technical data Quantity scale FKA
•Large backlit and touch-sensitive LCD screen
with digit height 18 mm, screen diagonal 5.8"
(approx. 147 mm)
•Dimensions housing FKA:
WxDxH 350x390x120 mm
•Optional battery operation, 6 x 1.5 V Size C
not included, operating time up to 15 h
•Net weight approx. 6,5 kg
•Permissible ambient temperature
10 °C / 40 °C
STANDARD
Accessories Quantity scale FKA
•see page 98
OPTION
KB-N only
Model
Quantity
scale
KERN
FKC 30K-6
FKC 30K-5
FKC 60K-6
FKC 60K-5
FKA
FKA 30K-4
FKA 30K-4
FKA 60K-4
FKA 60K-4
Weighing
range
[Max]
kg
36
36
65
65
KB-N only
Readout
[d]
g
0,1
0,1
0,2
0,2
FKA only
Weighing
plate
Reference
balance
mm
340 x 240
340 x 240
340 x 240
340 x 240
KB-N
KB 120-3N
KB 1200-2N
KB 120-3N
KB 1200-2N
Details: www.kern-sohn.com/en/FKC · Order hotline +49 [0] 7433 9933 - 0
KB-N only
Weighing
range
[Max]
g
120
1200
120
1200
Readout
[d]
g
0,001
0,01
0,001
0,01
Price
Min. piece
excl. of VAT
weight
[Counting] ex works
€
g/piece
0,001
1280,0,01
1260,0,001
1280,0,01
1260,-
Options
DAkkS Calibr. Certificate
KERN
962-128-127
962-128-127
962-129-127
962-129-127
€
145,145,160,160,-
Counting scales / Counting systems / Special stocktaking scales
99
10
Tradition and innovation for more than 170 years
An independent family business, KERN since already 6 generations is synonymous with quality and reliability in customer service.
1844
1863
KERN is founded –
precision balances are
produced
1994
A proud Gottlieb Kern
with his staff
2000
Accredited DKD laboratory
(ISO 17025)
2009
New premises in Balingen
2012
Approval for the manufacture and sale of height
rods (DIN EN 13485
and 93/42/EEC)
New customer portal
www.kern-sohn.com
goes live
1880
Pharmaceutical balance
with Aesculap
2002
Existing QM system certification in accordance with
DIN EN ISO 9001:2000
standards
2013
Starting construction of
Ziegelei 2.0 with computer-controlled high-bay
warehouse
1923
Inflation – KERN wages
are paid with self printed
currency
2007
Approval for the manu­fac­
ture of medical pro­ducts
(DIN EN 13485 and
93/42/EEC)
1980
The electronic balance
ousts mechanical devices
2008
Authorisation for initial
verification by the manu­
facturer (2009/23/EC)
2014
Expansion of the product
range to include optical
instruments (microscopes
and refractometers)
Our Tip
Come to see the Museum of scale and weight …
How a scale learned
to weigh! Come and
experience KERN history
in the Zollernschloss at
Balingen …
www.balingen.de
➔ Kultur
Printed in Germany
by KERN & SOHN GmbH
z-cb-gb-kp-201501
KERN – Tradition and Innovation for over 170 years
An independent family business, KERN since already 6 generations is synonymous with
quality and reliability in customer service.
fast
competent
versatile
• 24 hours delivery service –
ordered today, on its way
tomorrow
• DAkkS accreditation
DIN EN ISO/IEC 17025
• One-stop shopping: from
pocket balances through
to floor scales – everything
from one supplier
• Sales & service hotline available
from 8:00 am to 6:00 pm
reliable
• 3 years warranty for
balances over € 400,–
• Precision in weighing technology
for more than 170 years
• Certified QM system
DIN EN ISO 9001:2008
• Authorisation for initial ­verifi­cation by the manu­facturer
2009/23/EC
• Find the product you want at
lightning speed with the
“Balance Quick-Finder”
at www.kern-sohn.com
• Medical certifications
DIN EN ISO 13485 and
93/42/EEC
Order hotline
+49 [0] 7433 9933 - 0
Online-Shop
www.kern-sohn.com
Service hotline
+49 [0] 7433 9933 -199
E-mail order
info@kern-sohn.com
Calibration hotline
+49 [0] 7433 9933 -196
Fax Order
+49 [0] 7433 9933 -146
Our team of consultants
will assist you
from Monday to Friday
from 8:00 am to 6:00 pm
www.kern-sohn.com
For product specification
sheets, user manuals, useful
information, technical glossary
pictures and much more as
well as a smart search engine
for test weights and balances
KERN & SOHN GmbH
Balances, Test weights, DAkkS Calibration laboratory
Ziegelei 1
72336 Balingen
Germany
Tel.+49 [0] 7433 9933 - 0
Fax+49 [0] 7433 9933 - 149
info@kern-sohn.com
www.kern-sohn.com
APPROVAL FOR
M A N U FAC T U R E
OF MEDICAL
PRODUCTS
EN 13485 and
93/42/EEC
A U T H O R I S AT I O N
FOR INITIAL
V E R I F I C AT I O N
BY THE
MANUFACTURER
2009/23/EC
Member