Epson Aculaser CX28DN Series User`s guide

User’s Guide
NPD3982-00 EN
Downloaded from ManualsPrinter.com Manuals
Copyright Notice
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent
liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information
contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of
this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or
unauthorized modifications, repairs, or alterations to this product, or (excluding the
U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions.
Seiko Epson Corporation and its affiliates shall not be liable against any damages or
problems arising from the use of any options or any consumable products other than
those designated as Original Epson Products or Epson Approved Products by Seiko
Epson Corporation.
Downloaded from ManualsPrinter.com Manuals
SOFTWARE LICENSE AGREEMENT
This package contains the following materials provided by Seiko Epson Corporation (Epson):
software included as part of the printing system, the digitally-encoded machine-readable outline
data encoded in the special format and in the encrypted form (“Font Programs”), other software
which runs on a computer system for use in conjunction with the Printing Software (“Host Software”), and related explanatory written materials (“Documentation”). The term “Software” shall
be used to describe Printing Software, Font Programs and/or Host Software and also include
any upgrades, modified versions, additions, and copies of the Software.
The Software is being licensed to you under the terms of this Agreement.
Epson grants to you a non-exclusive sublicense to use the Software and Documentation, provided that you agree to the following:
1. You may use the Printing Software and accompanying Font Programs for imaging to the
licensed output device(s), solely for your own internal business purposes.
2. In addition to the license for Font Programs set forth in Section 1 (“Printing Software”)
above, you may use Roman Font Programs to reproduce weights, styles, and versions of
letters, numerals, characters and symbols (“Typefaces”) on the display or monitor for your
own internal business purposes.
3. You may make one backup copy of the Host Software, provided your backup copy is not
installed or used on any computer. Notwithstanding the above restrictions, you may install
the Host Software on any number of computers solely for use with one or more printing systems running the Printing Software.
4. You may assign its rights under this Agreement to an assignee of all of Licensee’s right and
interest to such Software and Documentation (“Assignee”) provided you transfer to
Assignee all copies of such Software and Documentation Assignee agrees to be bound by
all of the terms and conditions of this Agreement.
5. You agree not to modify, adapt or translate the Software and Documentation.
6. You agree that you will not attempt to alter, disassemble, decrypt, reverse engineer or
decompile the Software.
7. Title to and ownership of the Software and Documentation and any reproductions thereof
shall remain with Epson and its Licensor.
8. Trademarks shall be used in accordance with accepted trademark practice, including identification of the trademark owner’s name. Trademarks can only be used to identify printed
output produced by the Software. Such use of any trademark does not give you any rights
of ownership in that trademark.
9. You may not rent, lease, sublicense, lend or transfer versions or copies of the Software that
the Licensee does not use, or Software contained on any unused media, except as part of
the permanent transfer of all Software and Documentation as described above.
10. In no event will Epson or its licensor be liable to you for any consequential, incidental INDIRECT, PUNITIVE or special damages, including any lost profits or lost saving, even if
Epson has been advised of the possibility of such damages, or for any claim by any third
party. Epson or its licensor disclaims all warranties with regard to the software, express or
implied, including, without limitation implied warranties of merchantability, fitness for a particular purpose, title and non-infringement of third party rights. Some states or jurisdictions
do not allow the exclusion or limitation of incidental, consequential or special damages, so
the above limitations may not apply to you.
Downloaded from ManualsPrinter.com Manuals
11. Notice to Government End Users: The Software is a “commercial item,” as that term is
defined at 48 C.F.R.2.101, consisting of “commercial computer software” and “commercial
computer software documentation,” as such terms are used in 48 C.F.R. 12.212. Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4, all U.S. Government End Users acquire the Software with only those rights set forth herein.
12. You agree that you will not export the Software in any form in violation of any applicable
laws and regulations regarding export control of any countries.
Downloaded from ManualsPrinter.com Manuals
Legal Restrictions on Copying
Certain types of documents must never be copied with the purpose or intent to pass
copies of such documents off as the originals.
The following is not a complete list, but is meant to be used as a guide to responsible
copying.
Financial Instruments
z Personal checks
z Traveler’s checks
z Money orders
z Certificates of deposit
z Bonds or other certificates of indebtedness
z Stock certificates
Legal Documents
z Food stamps
z Postage stamps (canceled or uncanceled)
z Checks or drafts drawn by government agencies
z Internal revenue stamps (canceled or uncanceled)
z Passports
z Immigration papers
z Motor vehicle licenses and titles
z House and property titles and deeds
General
z Identification cards, badges, or insignias
z Copyrighted works without permission of the copyright owner
In addition, it is prohibited under any circumstances to copy domestic or foreign currencies, or works of art without permission of the copyright owner.
When in doubt about the nature of a document, consult with legal counsel.
"
In order to prohibit the illegal reproduction of certain documents, such as
paper currency, this machine is equipped with a counterfeit prevention feature.
Due to the counterfeit prevention feature that this machine is equipped with,
images may be distorted.
Downloaded from ManualsPrinter.com Manuals
For EU member states only
This symbol means: Do not dispose of this product
together with your household waste!
Please contact the Local Authority for appropriate disposal instructions. In the case of a new device being
purchased, the used one can also be given to our dealer
for appropriate disposal. Recycling of this product will
help to conserve natural resources and prevent potential
negative consequences for the environment and human
health caused by inappropriate waste handling.
This product complies with RoHS (2002/95/EC) directive.
Downloaded from ManualsPrinter.com Manuals
Contents
1
Introduction ....................................................................................................... 1
Getting Acquainted with Your Machine 2
Space Requirements 2
Part Names 4
Front View 4
Rear View 6
Front View with Options 6
Software CD-ROM 7
Printer Drivers (PostScript Drivers) 7
Printer Drivers (PCL Drivers) 7
Printer Drivers (PPD Files) 7
Scanner Drivers 8
Documentation 8
System Requirements 10
2
Control Panel and Configuration Menu ........................................................ 11
About the Control Panel 12
Control Panel Indicators and Keys 12
Display Indications 14
Main Screen (Copy Mode) 14
Contents
Downloaded from ManualsPrinter.com Manuals
i
Main Screen (Scan Mode) 17
Print Screen 21
Checking the Machine Status and Settings 22
TONER REMAINING 22
REPORT/STATUS Menu 22
TOTAL PRINT 23
SUPPLY STATUS 23
TX RESULT 24
REPORT 24
Configuration Menu Overview 25
UTILITY Menu 25
MACHINE SETTING Menu 27
PAPER SETUP Menu 31
ADMIN. MANAGEMENT Menu 34
COPY SETTING Menu 48
ADDRESS REGISTER Menu 50
REPORTING Menu 51
SCAN SETTING Menu 51
DIRECT PRINT Menu 53
PS/PCL PRINT Menu 55
PROOF/PRINT MENU 55
PAPER MENU 57
QUALITY MENU 60
SYS DEFAULT MENU 80
MEMORY PRINT Menu 86
3
Media Handling ............................................................................................... 89
Print Media 90
Specifications 90
Types 91
Plain Paper (Recycled Paper) 91
Thick Stock 92
Envelope 93
Label 94
Letterhead 95
Postcard 95
Transparency 96
Glossy Media 97
Guaranteed Imageable (Printable) Area 99
Imageable Area—Envelopes 99
Page Margins 99
Loading Media 100
How do I load media? 100
Tray 1 (Manual Feed Tray) 100
Loading Plain Paper 100
Other Media 102
ii
Contents
Downloaded from ManualsPrinter.com Manuals
Loading Envelopes 103
Loading Label Sheets/Letterheads/Postcards/Thick Stock/Glossy Media
and Transparencies 105
Tray 2 107
Loading Plain Paper 107
Tray 3 (Optional Lower Feeder Unit) 110
Loading Plain Paper 110
About Duplex Printing 113
How do I autoduplex? 113
Output Tray 115
Media Storage 116
Original Media 117
Specifications 117
Documents that can be placed on the original glass 117
Documents that can be loaded into the ADF 117
Loading a Document to be Copied 119
Placing a document on the original glass 119
Loading a document into the ADF 120
4
Using the Printer Driver ............................................................................... 121
Selecting Printer Options/Defaults (for Windows) 122
Windows Vista/XP/Server 2003/2000 (PCL6, PS) 122
Uninstalling the Printer Driver (for Windows) 124
Windows Vista/XP/Server 2003/2000 (PCL6, PS) 124
Displaying Printer Driver Settings (for Windows) 125
Windows Vista 125
Windows XP/Server 2003 125
Windows 2000 125
Printer Driver Settings 126
Common Buttons 126
Advanced Tab (PostScript Printer Driver Only) 127
Basic Tab 127
Layout Tab 128
Cover Page Tab 128
Watermark/Overlay Tab 128
Quality Tab 129
Other Tab 130
Limitations on printer driver functions installed with Point and Print 130
5
Camera Direct ............................................................................................... 131
Camera Direct 132
Printing Directly from a Digital Camera 132
6
Memory Direct ............................................................................................... 133
Memory Direct 134
Printing From a Connected USB Memory Device 134
Contents
Downloaded from ManualsPrinter.com Manuals
iii
7
Using the Copier ........................................................................................... 137
Making Basic Copies 138
Basic Copy Operation 138
Specifying the Copy Quality Setting 139
Selecting the Document Type 139
Specifying the Copy Density 140
Specifying the Zoom Ratio 140
Selecting a Preset Zoom Ratio 140
Specifying a Custom Zoom Ratio 140
Selecting the Media Tray 141
Making Advanced Copies 142
Setting 2in1/4in1 Copying 142
2in1/4in1 Copying From the ADF 142
2in1/4in1 Copying From the Original Glass 142
Setting a Copy Function 143
ID Card Copying 144
Repeat Copying 145
Poster Copying 146
Setting Duplex (Double-Sided) Copying 147
Duplex (Double-Sided) Copying From the ADF 147
Duplex (Double-Sided) Copying From the Original Glass 148
Duplex (Double-Sided) Document Copying 149
Setting Collated (Sort) Copying 149
Collated (Sort) Copying From the ADF 149
Collated (Sort) Copying From the Original Glass 149
8
Using the Scanner ........................................................................................ 151
Scanning From a Computer Application 152
Basic Scanning Operation 152
Windows TWAIN Driver Settings 153
Windows WIA Driver Settings 155
Macintosh TWAIN Driver Settings 156
Scanning With the Machine 158
Basic Scanning Operation 158
Specifying the Data Location 159
Saving Data on a USB Memory Device (Scan to USB Memory) 160
Specifying the Destination Address (Scan to E-mail/FTP/SMB) 161
Directly Entering the E-mail Address 161
Selecting From the Favorite List 162
Selecting an Address Destination 162
Selecting a Group Destination 163
Selecting From the Address Book 164
Searching the Address Book 164
Searching an LDAP Server 165
Specifying Multiple Destination Addresses 167
Editing a Specified Destination Address 167
iv
Downloaded from ManualsPrinter.com Manuals
Contents
Deleting a Specified Destination Address 168
Registering/Editing Addresses 168
Registering in the Favorite List 169
Deleting From the Favorite List 169
Registering Address Destinations (Direct Input) 170
Registering Address Destinations (LDAP Search) 171
Editing/Deleting Address Destinations 173
Registering Group Destinations 174
Editing/Deleting Group Destinations 175
Selecting the Data Format 176
Selecting the Scan Quality Setting 176
Selecting the Resolution 176
Selecting the Scan Mode 177
Selecting the Scan Density 177
Setting Duplex (Double-Sided) Scanning 177
Setting the Scan Size 178
Setting the Scan Color 178
Specifying the Subject 178
Deleting a Queued Transmission Job 178
9
Replacing Consumables .............................................................................. 181
Replacing Consumables 182
About Toner Cartridges 182
Replacing a Toner Cartridge 184
Replacing an Imaging Unit 188
Replacing the Waste Toner Bottle 194
10 Maintenance .................................................................................................. 199
Maintaining the Machine 200
Cleaning the Machine 202
Exterior 202
Media Rollers 203
Cleaning the Media Feed Rollers (Manual Feed Tray) 203
Cleaning the Media Feed Rollers (Tray 2/3) 205
Cleaning the Media Transfer Rollers for Tray 3 206
Cleaning the Media Feed Rollers for the ADF 207
Cleaning the Media Feed Rollers for the Duplex 208
Laser Lens 209
11 Troubleshooting ........................................................................................... 211
Introduction 212
Printing a Configuration Page 213
Unlocking the Scanner 214
Preventing Media Misfeeds 215
Understanding the Media Path 216
Clearing Media Misfeeds 216
Contents
Downloaded from ManualsPrinter.com Manuals
v
Media Misfeed Messages and Clearing Procedures 217
Clearing a Media Misfeed from Tray 1 (Manual Feed Tray) and Transfer
Roller 218
Clearing a Media Misfeed in Tray 2 221
Clearing a Media Misfeed in Tray 3 224
Clearing a Media Misfeed from the ADF 227
Clearing a Media Misfeed from the Duplex 229
Clearing a Media Misfeed from the Fuser Unit 230
Clearing a Media Misfeed from the Switchback 234
Clearing a Media Misfeed from the Horizontal Transport Area 236
Solving Problems with Media Misfeeds 238
Solving Other Problems 241
Solving Problems with Printing Quality 248
Status, Error, and Service Messages 254
Status Messages 254
Error Messages 255
Service Messages 263
12 Installing Accessories .................................................................................. 265
Introduction 266
Antistatic Protection 267
Dual In-Line Memory Module (DIMM) 268
Installing a DIMM 268
Hard Disk Drive 271
Installing the Hard Disk drive 271
Tray 3 (Lower Feeder Unit) 275
Kit Contents 275
Installing Tray 3 276
A Appendix ....................................................................................................... 279
Technical Specifications 280
Entering Text 283
Key Operation 283
Entering Names 283
Entering E-mail Addresses 284
Changing Input Mode 284
Inputting Example 284
Correcting Text and Input Precautions 286
Our Concern for Environmental Protection 287
What is an ENERGY STAR product? 287
vi
Downloaded from ManualsPrinter.com Manuals
Contents
1Introduction
Downloaded from ManualsPrinter.com Manuals
Getting Acquainted with Your Machine
Space Requirements
To ensure easy operation, consumable replacement and maintenance,
adhere to the recommended space requirements detailed below.
1355 mm (53.3")
100 mm
(3.9")
290 mm
(11.4")
539 mm (21.2")
326 mm
(12.8")
100 mm
(3.9")
326 mm
(12.8")
907 mm (35.7")
578 mm (22.8")
329 mm
(13.0")
Front View
590 mm (23.2")
100 mm
(3.9")
1016 mm (40.0")
Side View
2
Getting Acquainted with Your Machine
Downloaded from ManualsPrinter.com Manuals
590 mm (28.2")
1018 mm (40.1")
329 mm
(13.0")
578 mm (22.8")
326 mm
(12.8")
111 mm
(4.4")
100 mm
(3.9")
1016 mm (40.0")
Side View with Options
"
The option appears shaded in the above illustrations.
Getting Acquainted with Your Machine
Downloaded from ManualsPrinter.com Manuals
3
Part Names
The following drawings illustrate the parts of your machine referred to
throughout this guide, so please take some time to become familiar with
them.
Front View
2-a
2-b
2
2-c
1—Control panel
2-d
2—Automatic Document
Feeder (ADF)
2-e
1
2-a: ADF feed cover
2-b: Document guide
2-c: Document feed tray
2-d: Document output tray
4
2-e: Document stopper
"
"
The ADF may appear
as “document cover” in
status and error messages.
3
8
9
7
6
5
10
Lower the document
stopper when scanning
Legal-size paper with
the ADF.
3—Tray 1 (Manual feed tray)
4—Tray 2
5—Output tray
6—Extension tray
7—Scanner lock lever
8—Original glass
9—Original cover pad
10—Scanner unit
4
Getting Acquainted with Your Machine
Downloaded from ManualsPrinter.com Manuals
11—Fuser unit
12—Right door
13—Transfer roller
20
19
14—Transfer belt unit
11
15—Imaging unit(s)
16—Laser lens cleaning tool
18
17—Front cover
17
18—Waste toner bottle
12
19—Toner cartridge(s)
13
20—Ozone filter
16
15
14
16
13
14
18
19
Y
P
U
S
H
Y
15
Getting Acquainted with Your Machine
Downloaded from ManualsPrinter.com Manuals
5
Rear View
6
1—Power switch
2—Power connection
3—10Base-T/100Base-TX/
1000Base-T Ethernet Interface port
4—USB port
5—Rear cover
5
6—USB HOST port
1
3
4
2
Front View with Options
1—Lower feeder unit (Tray 3)
1
6
Getting Acquainted with Your Machine
Downloaded from ManualsPrinter.com Manuals
Software CD-ROM
Printer Drivers (PostScript Drivers)
Drivers
Use/Benefit
Windows Vista/XP/Server 2003/
2000
These drivers give you access to all of
the printer features, including finishing
and advanced layout. For details,
refer to “Displaying Printer Driver Settings (for Windows)” on page 125.
Windows Vista/XP/Server 2003 for
64bit
"
A specific PPD file has been prepared for applications (such as Page
Maker and Corel Draw) that require that a PPD file be specified when
printing.
When specifying a PPD file while printing on Windows Vista, XP,
Server 2003 and 2000, use the specific PS file provided on the software CD-ROM.
Printer Drivers (PCL Drivers)
Drivers
Use/Benefit
Windows Vista/XP/Server 2003/
2000
These drivers give you access to all of
the printer features, including finishing
and advanced layout. For details,
refer to “Displaying Printer Driver Settings (for Windows)” on page 125.
Windows Vista/XP/Server 2003 for
64bit
Printer Drivers (PPD Files)
Drivers
Use/Benefit
Macintosh OS X (10.2.8, 10.3, 10.4,
10.5)
These files are required in order to
use the printer driver for each operating system.
Red Hat Linux 9.0, SuSE Linux 8.2
For details of the Macintosh and
Linux printer driver, refer to the Reference Guide on the software
CD-ROM.
Getting Acquainted with Your Machine
Downloaded from ManualsPrinter.com Manuals
7
Scanner Drivers
Drivers
Use/Benefit
TWAIN Driver for Windows Vista/XP/ These drivers enable you to set scanServer 2003/2000
ning functions, such as the color setting and size adjustments.
TWAIN Driver for Macintosh OS X
10.2.8 or later
For details, refer to “Windows TWAIN
Driver Settings” on page 153.
WIA Driver for Windows Vista/XP
This driver enables you to set scanWIA Driver for Windows Vista/XP for ning functions, such as the color setting and size adjustments.
64bit
For details, refer to “Windows WIA
Driver Settings” on page 155.
"
"
"
For details of the Windows drivers, refer to the Setup Guide on the
software CD-ROM.
For details of the Macintosh and Linux drivers, refer to the Reference
Guide on the software CD-ROM.
Windows TWAIN driver does not correspond to 64-bit applications
though it corresponds to 32-bit applications on 64-bit OS.
Documentation
8
Documentation
Use/Benefit
Setup Guide
This manual provides installation
details that must be performed in
order to use this machine, such as
setting up the machine and installing
the drivers.
User's Guide (this manual)
This manual provides details on general daily operations, such as using
the drivers and control panel and
replacing consumables.
Getting Acquainted with Your Machine
Downloaded from ManualsPrinter.com Manuals
Documentation
Use/Benefit
Reference Guide
This manual provides details on
installing the Macintosh and Linux
drivers and on specifying settings for
the network.
Safety Information Guide
This guide provides details on operating conditions and precautions. Be
sure to read this information before
using the machine.
Getting Acquainted with Your Machine
Downloaded from ManualsPrinter.com Manuals
9
System Requirements
„ Personal computer
–
Pentium II: 400MHz or higher
–
PowerPC G3 or later (G4 or later is recommended)
–
Macintosh equipped with an Intel processor
„ Operating System
–
Microsoft Windows Vista Home Basic/Home Premium/Ultimate/Business/Enterprise, Windows Vista Home Basic/Home Premium/ Ultimate/Business/Enterprise x64 Edition, Windows XP Home Edition/
Professional (Service Pack 2 or later), Windows XP Professional x64
Edition, Windows Server 2008 Standard/Enterprise, Windows Server
2008 Standard/Enterprise x64 Edition, Windows Server 2003, Windows Server 2003 x64 Edition, Windows 2000 (Service Pack 4 or
later)
–
Mac OS X (10.2.8 or later; We recommend installing the latest patch)
–
Red Hat Linux 9.0, SuSE Linux 8.2
„ Free hard disk space
256 MB or more
„ RAM
128 MB or more
„ CD drive
„ I/O interface
–
10Base-T/100Base-TX/1000Base-T (IEEE 802.3) Ethernet interface
port
–
USB Revision 2.0 and USB Revision 1.1 compliant port
"
"
10
The Ethernet cable and USB cable are not included with the machine.
For details of the Macintosh and Linux drivers, refer to the Reference
Guide on the software CD-ROM.
Getting Acquainted with Your Machine
Downloaded from ManualsPrinter.com Manuals
2Control Panel
and Configuration
Menu
Downloaded from ManualsPrinter.com Manuals
About the Control Panel
1
3 24 3 5
7
6
8
9 10
11 12 13 14
Control Panel Indicators and Keys
No. Name
Function
1
Message window
Displays settings, menus, and messages.
2
+/, keys
Moves up and down through menus, options, or
choices.
3
*/) keys
Moves left and right through menus, options, or
choices.
4
Select key
Press to select the setting that is currently displayed.
5
Error indicator
Indicates an error condition.
6
Back key
Clears the specified number of copies and entered
text.
Press to return to the previous screen.
Press to cancel the setting that is currently displayed.
7
Keypad
Enters desired number of copies. Enters mail
addresses and names of recipients.
8
Addressbook
key
Displays the information registered in the favorite
list, address destinations and group destinations.
12
Downloaded from ManualsPrinter.com Manuals
About the Control Panel
No. Name
Function
9
Enters Scan mode. (Scan to E-mail, Scan to FTP,
Scan to a shared folder on a computer, or Scan to
USB Memory)
Scan key/LED
Lights up in green to indicate that the machine is in
Scan mode.
For details on the Scanner functions, refer to chapter
6, “Using the Scanner”
10
Copy key/LED
Enters Copy mode.
Lights up in green to indicate that the machine is in
Copy mode.
For details on the Copy functions, refer to chapter 5,
“Using the Copier”.
11
Start (B&W) key Starts monochrome copying or scanning.
12
Start indicator
Lights up in blue when copying is possible.
Lights up in orange when copying is not possible, for
example, during warm-up or if an error has occurred.
13
Start (Color) key Starts color copying or scanning.
14
Stop/Reset key Returns the settings to their defaults and stops functions.
To stop a job, press the * key before pressing the
Stop/Reset key.
About the Control Panel
Downloaded from ManualsPrinter.com Manuals
13
Display Indications
Main Screen (Copy Mode)
3
4
1
2
No. Indication
Description
1
Copy settings
Allows the current settings to be checked and the
various settings to be changed. For details, refer to
“Copy settings” on page 15.
2
Status
Depending on the situation, the machine status or an
error message may appear.
3
Copy density
Indicates the copy density.
AUTO appears when DENSITY is set to AUTO and
the TEXT copy mode is selected.
4
Number of
copies
Indicates the number of copies.
14
Downloaded from ManualsPrinter.com Manuals
About the Control Panel
„ Copy settings
1
2
3
Press +/,
4
5
6
Press +/,
7
8
9
Press +/,
10
11
No. Indication
Description
1
Media tray
Indicates the media tray that is selected. For details
on selecting the media tray, refer to “Selecting the
Media Tray” on page 141.
2
Zoom ratio
Indicates the zoom ratio that is specified. For details
on specifying the zoom ratio, refer to “Specifying the
Zoom Ratio” on page 140.
3
Copy quality
Indicates the copy quality that is selected. For details
on selecting the copy quality, refer to “Specifying the
Copy Quality Setting” on page 139.
About the Control Panel
Downloaded from ManualsPrinter.com Manuals
15
No. Indication
Description
4
Collated (Sort)
copying
Indicates whether or not collated (Sort) copying is
selected. For details on selecting collated (Sort)
copying, refer to “Setting Collated (Sort) Copying” on
page 149.
5
2in1/4in1 copying
Indicates whether or not 2in1/4in1 copying is
selected. For details on selecting 2in1/4in1 copying,
refer to “Setting 2in1/4in1 Copying” on page 142.
6
Double-sided/
single-sided
copying
Indicates whether double-sided copying or single-sided copying is selected. For details on selecting double-sided/single-sided copying, refer to
“Setting Duplex (Double-Sided) Copying” on page
147.
7
Copy function
Indicates the copy function that is set. For details on
setting a copy function, refer to “Setting a Copy
Function” on page 143.
8
UTILITY
Select this menu item to change the various
machine settings. For details, refer to “UTILITY
Menu” on page 25.
9
REPORT/STA- Select this menu item to view the total number of
pages printed by this machine as well as to print the
TUS
reports. For details, refer to “REPORT/STATUS
Menu” on page 22.
10
PS/PCL
PRINT
Select this menu item to print or delete jobs stored
on the machine's hard disk (optional) and to change
the settings related to PS/PCL printing. For details,
refer to “PS/PCL PRINT Menu” on page 55.
11
MEMORY
PRINT
Select this menu item to perform memory direct
printing operations and to specify settings for these
operations. For details, refer to “MEMORY PRINT
Menu” on page 86.
" This menu item appears only if an optional
hard disk drive is installed.
16
Downloaded from ManualsPrinter.com Manuals
About the Control Panel
Main Screen (Scan Mode)
3
1
2
No. Indication
Description
1
Scan settings
Allows the current settings to be checked and the
various settings to be changed. For details, refer to
“Scan settings” on page 18.
2
Status
Depending on the situation, the machine status or an
error message may appear.
3
Available memory
Indicates the percentage of memory available for
scanning operations.
About the Control Panel
Downloaded from ManualsPrinter.com Manuals
17
„ Scan settings
1
2
3
Press +/,
4
5
6
Press +/,
7
8
9
Press +/,
10
No. Indication
Description
1
Data format
Indicates the data format that is selected. For details
on selecting the data format, refer to “Selecting the
Data Format” on page 176.
2
Scan quality
Indicates the scan quality that is selected. For details
on selecting the scan quality, refer to “Selecting the
Scan Quality Setting” on page 176.
18
Downloaded from ManualsPrinter.com Manuals
About the Control Panel
No. Indication
3
Description
Scan data desti- Indicates the specified destination for the scan data.
nation
For details on specifying the destination of the data,
refer to “Specifying the Data Location” on page 159
and “Specifying the Destination Address (Scan to
E-mail/FTP/SMB)” on page 161.
" If no destination has been specified, SCAN
TO appears.
4
Single-sided/
double-sided
scanning
Indicates whether double-sided scanning or single-sided scanning is selected. For details on selecting double-sided/single-sided scanning, refer to
“Setting Duplex (Double-Sided) Scanning” on page
177.
5
Scan size
Indicates the scan size that is selected. For details
on selecting the scan size, refer to “Setting the Scan
Size” on page 178.
6
Scan color
Indicates the scan color that is selected. For details
on selecting the scan color, refer to “Setting the Scan
Color” on page 178.
7
SUBJECT
Select this menu item to specify the subject. For
details on specifying the subject, refer to “Specifying
the Subject” on page 178.
" This menu item does not appear if an FTP
address or SMB address was specified as the
destination.
8
CANCEL
RESERV.
Select this menu item to display the list of jobs
queued for transmission and to delete a job. For
details, refer to “Deleting a Queued Transmission
Job” on page 178.
" This menu item does not appear if an e-mail
address, FTP address or SMB address was
specified as the destination.
About the Control Panel
Downloaded from ManualsPrinter.com Manuals
19
No. Indication
9
UTILITY
Description
Select this menu item to change the various
machine settings. For details, refer to “UTILITY
Menu” on page 25.
" This menu item does not appear if an e-mail
address, FTP address or SMB address was
specified as the destination.
10
REPORT/STA- Select this menu item to view the total number of
pages printed by this machine as well as to print the
TUS
reports. For details, refer to “REPORT/STATUS
Menu” on page 22.
" This menu item does not appear if an e-mail
address, FTP address or SMB address was
specified as the destination.
20
Downloaded from ManualsPrinter.com Manuals
About the Control Panel
Print Screen
When a print job is received, PRINTER: Printing appears in the status
section of the main screen. To display the print screen (as shown below),
press the * key while PRINTER: Printing is displayed.
To cancel printing, press the Stop/Reset key when the print screen appears.
Press the Select key to select YES.
No. Indication
Description
1
Status
Displays messages indicating operations such as
printing.
2
Media tray/
media size
Indicates the media tray and media size that is
selected.
About the Control Panel
Downloaded from ManualsPrinter.com Manuals
21
Checking the Machine Status and Settings
TONER REMAINING
With the main screen displayed, press the * key to display the TONER
REMAINING screen. From this screen, a general estimate of the amount of
toner remaining in the toner cartridges can be viewed.
To return to the main screen, press the Back key.
"
If the Select key is held down for at least 2 seconds while the screen
described above is displayed, the configuration page will be printed.
REPORT/STATUS Menu
To display the REPORT/STATUS screen, select REPORT/STATUS in the
main screen, and then press the Select key. From this menu, the total number of pages printed by this machine can be viewed. In addition, the reports
can be printed. The REPORT/STATUS menu is structured as shown below.
"
To return to the previous screen, press the Back key. To display the
main screen, press the Stop/Reset key.
REPORT/STATUS
TOTAL PRINT
SUPPLY STATUS
TX RESULT
REPORT
22
Checking the Machine Status and Settings
Downloaded from ManualsPrinter.com Manuals
TOTAL PRINT
The total number of pages for each of the following can be checked.
TOTAL PRINT
This counter shows the total number of pages
printed.
MONO COPY
This counter shows the total number of pages
copied in black-and-white.
COLOR COPY
This counter shows the total number of pages
copied in color.
MONO PRINT
This counter shows the total number of pages
printed in black-and-white.
COLOR PRINT
This counter shows the total number of pages
printed in color.
TOTAL SCAN
This counter shows the total number of document pages that were scanned.
SUPPLY STATUS
The remaining amount of toner in the toner cartridges and the remaining service life of the imaging units can be displayed as a percentage.
C TONER
Displays the remaining amount of toner in the
cyan (C) toner cartridge as a percentage.
M TONER
Displays the remaining amount of toner in the
magenta (M) toner cartridge as a percentage.
Y TONER
Displays the remaining amount of toner in the
yellow (Y) toner cartridge as a percentage.
K TONER
Displays the remaining amount of toner in the
black (K) toner cartridge as a percentage.
C I-UNIT
Displays the remaining service life of the cyan
(C) imaging unit as a percentage.
M I-UNIT
Displays the remaining service life of the
magenta (M) imaging unit as a percentage.
Y I-UNIT
Displays the remaining service life of the yellow
(Y) imaging unit as a percentage.
K I-UNIT
Displays the remaining service life of the black
(K) imaging unit as a percentage.
Checking the Machine Status and Settings
Downloaded from ManualsPrinter.com Manuals
23
TX RESULT
The transmission history of Scan To E-mail, Scan To SMB, and Scan To FTP
can be displayed.
For details, refer to “Specifying the Destination Address (Scan to E-mail/FTP/
SMB)” on page 161.
REPORT
The machine settings, lists and reports related to scanning can be printed.
TX RESULT REPORT
Prints the result of the latest scan.
FAVORITE LIST
Prints a list of the destinations registered in the
favorite list.
ADDRESS LIST
Prints a list of the address destinations.
GROUP LIST
Prints a list of the group destinations.
UTILITY MAP
Prints the UTILITY menu and its settings.
PS/PCL MENU MAP
Prints PS/PCL PRINT menu and its settings.
CONFIGURATION PAGE Prints a estimate of the percentage of toner
remaining and the settings, information and status of this machine.
24
PS FONT LIST
Prints the PostScript font list.
PCL FONT LIST
Prints the PCL font list.
DIRECTORY LIST
Prints the directory list of the hard disk.
Checking the Machine Status and Settings
Downloaded from ManualsPrinter.com Manuals
Configuration Menu Overview
To display the settings menu for this machine, select UTILITY in the main
screen, and then press the Select key. From the UTILITY menu, settings for
the various machine functions can be changed.
In addition, Copy mode settings can be specified for PS/PCL printing and
memory direct printing. For details, refer to “PS/PCL PRINT Menu” on page
55 and “MEMORY PRINT Menu” on page 86.
UTILITY Menu
From this menu, various machine settings can be changed. The UTILITY
menu is structured as shown below.
"
"
To return to the previous screen in the UTILITY menu, press the Back
key. (If the Back key is pressed while settings are being specified,
those settings are not saved.)
The ADMIN. MANAGEMENT menu is accessible only by the administrator. To display the settings for this menu, select ADMIN. MANAGEMENT, use the keypad to type in the 6-digit administrator access code
(default: 000000), and then press the Select key.
UTILITY
MACHINE SETTING
PAPER SETUP
ADMIN. MANAGEMENT
COPY SETTING
ADRESS REGISTER
REPORTING
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
25
SCAN SETTING
DIRECT PRINT*
"
26
*
This menu item appears when ADMIN. MANAGEMENT/CAMERA
DIRECT is set to ENABLE.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
MACHINE SETTING Menu
MACHINE SETTING
AUTO PANEL RESET
PREHEAT MODE
ENERGY SAVE MODE
LCD CONTRAST
KEY SPEED
TIME TO START
INTERVAL
LANGUAGE
LAMP OFF TIME
LAMP WARMUP TIME
TONER EMPTY
TONER NEAR EMPTY
I-UNIT NEAR EMPTY
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
27
AUTO CONTINUE
CALIBRATION
"
Manufacturer’s default settings appear in bold.
AUTO PANEL RESET
OFF / 30sec / 1min / 2min /
3min / 4min / 5min
Setting
Specify the length of time until all settings that
have not been programmed, such as the number of copies, are cleared and return to their
default settings when no operation is performed.
To set the machine to perform the auto panel
reset operation, select from 30sec, 1min, 2min,
3min, 4min or 5min for the length of time until
the auto panel reset operation is performed.
PREHEAT MODE
1 to 120 min (Default: 1 min)
Setting
Enters Preheat mode (first stage of the energy
save mode) in order to conserve energy when
no operation is performed. Specify the length of
time in minutes until the machine enters Preheat mode.
ENERGY SAVE MODE
3 to 120 min (Default: 3 min)
Setting
Enters Energy Save mode in order to conserve
energy when no operation is performed. Specify
the length of time in minutes until the machine
enters Energy Save mode.
LCD CONTRAST
Setting
(LIGHT)
(DARK)
Specify the brightness of the message window.
28
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
KEY
SPEED
TIME TO
START
Setting
0.1sec / 0.3sec / 0.5sec /
1.0sec / 1.5sec / 2.0sec /
2.5sec / 3.0sec
Specify the length of time until the cursor begins
to move continuously when a key is held down.
INTERVAL Setting
0.1sec / 0.3sec / 0.5sec /
1.0sec / 1.5sec / 2.0sec /
2.5sec / 3.0sec
Specify the length of time until the cursor continuously moves between settings or characters.
LANGUAGE
Setting
ENGLISH / FRENCH / GERMAN /
ITALIAN / SPANISH / PORTUGUESE / RUSSIAN / CZECH /
SLOVAK / HUNGARIAN / POLISH
/ JAPANESE
Select the language of the menus and messages that appear in the message window.
LAMP OFF TIME
Setting
MODE1 / MODE2
Select the length of time until the scanner unit
lamp goes off when no operation is performed.
If MODE1 is selected, the lamp goes off when
the machine enters Preheat mode.
If MODE2 is selected, the lamp goes off when
the machine enters Energy Save mode.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
29
LAMP WARMUP TIME
AUTO / FIX
Setting
Specify the warm-up time for the lamp of the
scanner unit.
If AUTO is selected, the length of time to
recover from Energy Save mode when the
machine is turned on is adjusted according to
the room temperature. Since the machine cannot be used until its condition is completely stabilized, select this setting, for example, if you
wish to scan at a high image quality from the
first page.
If FIX is selected, the machine can be used
after lamp warm-up is finished. With a low room
temperature, the quality of the first page of a
copy or scanned image may not be as good as
if AUTO was selected.
TONER EMPTY
STOP / BW CONTINUE
Setting
Select whether or not printing and copying stop
when the toner has run out.
If STOP is selected, printing and copying stop
when the toner runs out.
If BW CONTINUE is selected, monochrome
printing and monochrome copying can continue
when one or more color toners run out while
black toner still remains.
TONER NEAR EMPTY
ON / OFF
Setting
When the toner is nearly run out, a warning
message appears.
I-UNIT NEAR EMPTY Setting
ON / OFF
When the imaging unit is nearly run out, warning
message appears.
AUTO CONTINUE
ON / OFF
Setting
Select whether or not printing continues when a
size error occurs during printing.
CALIBRATION
ON / OFF
Setting
Select whether or not to perform image stabilization. If ON is selected, image stabilization is
started.
30
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
PAPER SETUP Menu
PAPER SETUP
TRAY1 PAPER
TRAY2 PAPER
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
31
"
Manufacturer’s default settings appear in bold.
TRAY1 PAPER
Media type
PLAIN PAPER / THICK PAPER /
THICK PAPER2 / TRANSPARENCY /
LABELS / LETTERHEAD / GLOSSY /
GLOSSY2 / ENVELOPE / POSTCARD
Paper size
When a setting other than ENVELOPE
or POSTCARD is selected: A4 / A5 / B5
/ LEGAL / LETTER / G LETTER /
STATEMENT / EXECUTIVE / FOLIO /
G LEGAL / CUSTOM
When ENVELOPE is selected: COM10 /
C6 / DL / MONARCH / CHOU#3 / CUS-
TOM
When POSTCARD is selected:
J-POSTCARD 100x148 / D-POSTCARD 148x200 / CUSTOM
Select the type and size of the media loaded into Tray
1. If CUSTOM is selected as the paper size, specify
settings for LENGTH and WIDTH separately.
The Setting range for LENGTH is 148 to 356 mm.
The default setting is 297 mm.
The Setting range for WIDTH is 92 to 216 mm.
The default setting is 210 mm.
When a media type is selected, a screen appears,
showing the available media sizes. The available
media sizes differ depending on the selected media
type.
" The setting for CUSTOM is displayed in
metric (mm) even if ADMIN. MANAGEMENT/
USER SETTING/PRESET ZOOM is set to
INCH.
32
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
TRAY2 PAPER
Paper size
A4 / A5 / B5 / LETTER / G LETTER /
STATEMENT / EXECUTIVE / CUSTOM
Select the size of the media loaded into Tray 2. If
CUSTOM is selected as the paper size, specify settings
for LENGTH and WIDTH separately.
The Setting range for LENGTH is 148 to 297 mm.
The default setting is 297 mm.
The Setting range for WIDTH is 92 to 216 mm.
The default setting is 210 mm.
Only plain paper can be loaded into Tray 2.
" The setting for CUSTOM is displayed in
metric (mm) even if ADMIN. MANAGEMENT/
USER SETTING/PRESET ZOOM is set to
INCH.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
33
ADMIN. MANAGEMENT Menu
"
The ADMIN. MANAGEMENT menu is accessible only by the administrator. To display the settings for this menu, select ADMIN. MANAGEMENT, use the keypad to type in the 6-digit administrator access code
(default: 000000), and then press the Select key.
ADMIN. MANAGEMENT
ADMINISTRATOR
NO.
NETWORK SETTING
TCP/IP
IP ADDR. SETTING*1
DNS*1
DNS AUTO SETTING
SPECIFY
DHCP*1
BOOTP*1
ARP/PING*1
HTTP*1
FTP*1
SMB*1
34
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
BONJOUR*1
DYNAMIC DNS*1
IPP*1
RAW PORT*1
DISABLE/ENABLE
BIDIRECTIONAL
SLP*1
SNMP*1
WSD PRINT*1
IPSEC*1
IP ADDR.
FILTER*1
ACCESS PER.
ACCESS REFUSE
IPv6*1
DISABLE/ENABLE
AUTO SETTING*2
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
35
LINK LOCAL*2
GLOBAL
ADDRESS*2
GATEWAY
ADDRESS*2
NETWARE
APPLETALK
SPEED/
DUPLEX
IEEE802.1X
E-MAIL SETTING
SMTP
SENDER NAME
E-MAIL ADDRESS
DEFAULT SUBJECT
SMTP SERVER
ADDR.
SMTP PORT NO.
36
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
SMTP TIMEOUT
TEXT INSERT
POP BEFORE SMTP
DISABLE/ENABLE
POP3 SERVER
ADDR.*3
POP3 PORT NO.*3
POP3 TIMEOUT*3
POP3 ACCOUNT*3
POP3 PASSWORD*3
SMTP AUTH.
DISABLE/ENABLE
SMTP USER
NAME*4
SMTP PASSWORD*4
LDAP SETTING
DISABLE/ENABLE
LDAP SERVER
ADDR.*5
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
37
LDAP
PORT NO.*5
SSL SETTING*5
SEARCH BASE*5
ATTRIBUTE*5
SEARCH
METHOD*5
LDAP
TIMEOUT*5
MAX.SEARCH
RESULTS*5
AUTHENTICATION*5
LDAP ACCOUNT*5
LDAP PASSWORD*5
DOMAIN NAME*5
CAMERA DIRECT
USER SETTING
38
COUNTRY SETTING
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
DATE&TIME
DATE FORMAT
PRESET ZOOM
SUPPLIES
REPLACE
TRANSFER BELT
FUSER UNIT
TRANSFER ROLLER
"
This menu item appears when ADMIN. MANAGEMENT/NETWORK SETTING/TCP/IP is set to ENABLE.
*2
This menu item appears when ADMIN. MANAGEMENT/NETWORK
SETTING/IPv6/DISABLE/ENABLE is set to ENABLE.
*3
This menu item appears when ADMIN. MANAGEMENT/E-MAIL
SETTING/POP BEFORE SMTP/DISABLE/ENABLE is set to
ENABLE.
*4
This menu item appears when ADMIN. MANAGEMENT/E-MAIL
SETTING/SMTP AUTH./DISABLE/ENABLE is set to ENABLE.
*5
This menu item appears when ADMIN. MANAGEMENT/LDAP
SETTING/DISABLE/ENABLE is set to ENABLE.
*1
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
39
"
Manufacturer’s default settings appear in bold.
ADMINISTRATOR NO.
Specify the new administrator access
code.
NETWORK
SETTING
Setting
TCP/IP
DISABLE / ENABLE
Select the setting for connecting to this
machine through a network.
IP ADDR. SETTING
Setting
AUTO / SPECIFY
Set the IP address of this printer on the
network.
If AUTO is selected, the IP address will
be assigned automatically.
If SPECIFY is selected, manually specify settings for IP ADDRESS, SUBNET MASK and GATEWAY.
DNS
DNS
AUTO
SETTING
Setting
DISABLE / ENABLE
SPECIFY
Specify the DNS server address (up to
three addresses).
Select whether or not the DNS server
address is automatically assigned by
the DHCP server.
The default setting is “0.0.0.0”.
DHCP
Setting
DISABLE / ENABLE
If there is a DHCP server on the network, specify whether the IP address
and other network information is automatically assigned by the DHCP server.
BOOTP
Setting
DISABLE / ENABLE
If there is a BOOTP server on the network, specify whether the IP address
and other network information is automatically assigned by the BOOTP
server.
ARP/PING
Setting
DISABLE / ENABLE
Select whether or not the ARP/PING
command is used when the IP address
is assigned.
40
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
HTTP
Setting
DISABLE / ENABLE
Select whether or not to enable HTTP.
FTP
Setting
DISABLE / ENABLE
Select whether or not to enable the FTP
server.
SMB
Setting
DISABLE / ENABLE
Select whether or not to enable SMB.
BONJOUR
Setting
DISABLE / ENABLE
Select whether or not to enable Bonjour.
DYNAMIC DNS
Setting
DISABLE / ENABLE
Select whether or not to enable
Dynamic DNS.
IPP
Setting
DISABLE / ENABLE
Select whether or not to enable IPP.
" If HTTP is set to DISABLE, IPP
cannot be set.
RAW
PORT
Setting
DISDISABLE / ENABLE
ABLE/
Select whether or not to enable the raw
ENABLE port.
Setting
BIDIDISABLE / ENABLE
RECSelect whether or not to enable raw port
TIONAL bidirectional communication.
SLP
Setting
DISABLE / ENABLE
Select whether or not to enable SLP.
SNMP
Setting
DISABLE / ENABLE
Select whether or not to enable SNMP.
WSD PRINT
Setting
DISABLE / ENABLE
Select whether or not to enable WSD
printing.
IPSEC
Setting
DISABLE / ENABLE
Select whether or not to enable IPsec.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
41
IP
ACCESS Setting
DISABLE / ENABLE
ADDR.
PER.
Specify access permissions for IP
FILTER
address filtering.
ACCESS Setting
DISABLE / ENABLE
REFUSE Specify access blocking for IP address
filtering.
IPv6
Setting
DISDISABLE / ENABLE
ABLE/
Select whether or not to enable IPv6.
ENABLE
AUTO
SETTING
Setting
YES/NO
LINK
LOCAL
Displays the link-local address.
Select whether or not to enable the IPv6
auto setting.
GLOBAL Displays the global address.
ADDRES
S
Displays the gateway address.
GATEWAY
ADDRES
S
NETWARE
Setting
DISABLE / ENABLE
Select whether or not to enable NetWare.
APPLETALK
Setting
DISABLE / ENABLE
Select whether or not to enable AppleTalk.
SPEED/DUPLEX
Setting
AUTO / 10BASE-T
FULL / 10BASE-T
HALF / 100BASE-TX
FULL / 100BASE-TX
HALF / 1000BASE
FULL
Specifies the transmission speed for the
network and the transmission method
for bi-directional transmission.
42
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
IEEE802.1X
Setting
DISABLE / ENABLE
Select whether or not to enable
IEEE802.1X.
E-MAIL
SETTING
SMTP
Setting
DISABLE / ENABLE
Select whether to enable or disable
e-mail transmission operations for this
machine.
SENDER NAME
Specify the name of the E-mail sender
(up to 20 characters) used for network
scanning.
The default setting is “EPSON
AL-CX28”.
E-MAIL ADDRESS Specify the E-mail address (up to 64
characters) of the E-mail sender used
for network scanning.
DEFAULT SUBJECT
Specify the subject (up to 20 characters)
of the E-mail message used for network
scanning.
The default setting is “from EPSON
AL-CX28”.
SMTP SERVER
ADDR.
Specify the IP address or host name (up
to 64 characters) for the SMTP server.
The default setting is “0.0.0.0”.
SMTP PORT NO.
Setting
1 to 65535 (Default: 25)
Specify the port number communicating
with the SMTP server.
SMTP TIMEOUT
Setting
30 to 300 sec (Default:
60 sec)
Select the amount of time (in seconds)
until the connection with the SMTP
server times out.
TEXT INSERT
Setting
OFF / ON
Select whether or not the specified text
is inserted into the E-mail message.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
43
Setting
POP
DISDISABLE / ENABLE
BEFORE ABLE/
Select whether or not to enable POP
SMTP
ENABLE Before SMTP.
If ENABLE is selected, specify the time
(between 0 and 60 seconds). The
default setting is 1sec.
Specify the host name or IP address for
POP3
SERVER the POP3 server used for authentication
with POP Before SMTP.
ADDR.
The default setting is “0.0.0.0”.
POP3
PORT
NO.
Setting
POP3
TIMEOUT
Setting
1 to 65535 (Default: 110)
Specify the port number used for communicating with the POP3 server.
30 to 300 sec (Default:
30 sec)
Select the amount of time (in seconds)
until the connection with the POP3
server times out.
Specify the user name (up to 63 characPOP3
ACCOUNT ters) used for authentication with POP3
server.
POP3
PASSWORD
SMTP
AUTH.
44
Specify the password (up to 15 characters) used for authentication with POP3
server.
Setting
DISDISABLE / ENABLE
ABLE/
Select whether or not to enable SMTP
ENABLE authentication.
SMTP
USERNAME
Specify the user name (up to 63 characters) used for SMTP authentication.
SMTP
PASSWORD
Specify the password (up to 15 characters) used for SMTP authentication.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
LDAP
SETTING
DISABLE/ENABLE Setting
DISABLE / ENABLE
Select whether or not to enable the
LDAP function.
LDAP SERVER
ADDR.
Specify the address (up to 64 characters) of the LDAP server.
The default setting is “0.0.0.0”.
LDAP PORT NO.
Setting
1 to 65535 (Default: 389)
Specify the port number of the LDAP
server.
SSL SETTING
Setting
DISABLE / ENABLE
Select whether or not to enable SSL.
SEARCH BASE
Specify the search starting point (up to
64 characters) in a hierarchical structure
arranged on the LDAP server.
ATTRIBUTE
The conditions for searches can be
specified as a name or e-mail address
(up to 32 characters).
The default setting is “cn”.
SEARCH METHOD
Setting
BEGIN / CONTAIN / END
The specified characters can be
searched for at the beginning, within or
at the end.
LDAP TIMEOUT
Setting
5 to 300 sec (Default:
60 sec)
Specify the maximum wait time during a
search.
MAX.SEARCH
RESULTS
Setting
5 to 100 (Default: 100)
Specify the maximum number of destinations displayed after a search.
AUTHENTICATION Setting
ANONYMOUS / SIMPLE /
DIGEST-MD5 /
GSS-SPNEGO
Select the authentication method used
for logging on to the LDAP server.
LDAP ACCOUNT
Specify the account (up to 64 characters) used to connect to the LDAP
server.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
45
LDAP PASSWORD
Specify the password (up to 32 characters) used to connect to the LDAP
server.
DOMAIN NAME
Specify the domain name (up to 64
characters) used to connect to the
LDAP server.
CAMERA DIRECT
Setting
DISABLE / ENABLE
USER
SETTING
Setting
ARGENTINA / AUSTRALIA / AUSTRIA / BELGIUM / BRAZIL /
CANADA / CHINA /
CZECH / DENMARK /
EUROPE / FINLAND /
FRANCE / GERMANY /
GREECE / HONG KONG /
HUNGARY / IRELAND /
ISRAEL / ITALY /
JAPAN / KOREA /
MALAYSIA / MEXICO /
THE NETHERLANDS /
NEW ZEALAND / NORWAY
/ PHILIPPINES /
POLAND / PORTUGAL /
RUSSIA / SAUDI ARABIA / SINGAPORE /
SLOVAKIA / SOUTH
AFRICA / SPAIN / SWEDEN / SWITZERLAND /
TAIWAN / TURKEY /
U.S.A / UNITED KINGDOM / VIETNAM
COUNTRY SETTING
Select the country where this machine
is installed.
46
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
DATE&TIME
Setting
TIME: 00:00-23:59
(Default: 00:00)
DATE: ’00/01/01-’99/12/31
(Default: ’09/01/01)
ZONE:
GMT+12:00-GMT-12:00 (in
30-minute intervals)
(Default: GMT+00:00)
Use the keypad to specify the current
date, time and time zone.
DATE FORMAT
Setting
MM/DD/YY / DD/MM/YY /
YY/MM/DD
Select the display format for reports and
lists.
PRESET ZOOM
Setting
INCH / METRIC
Select the measurement units for the
preset zoom ratios.
SUPPLIES
REPLACE
TRANSFER BELT
Replace the counter when the transfer
belt unit is replaced with new one.
FUSER UNIT
Replace the counter when the fuser unit
is replaced with new one.
TRANSFER
ROLLER
Replace the counter when the transfer
roller is replaced with new one.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
47
COPY SETTING Menu
COPY SETTING
PAPER PRIORITY
QUALITY PRIORITY
DENSITY PRIORITY
DENSITY LEVEL
AUTO
MANUAL
OUTPUT PRIORITY
4IN1 COPY ORDER
DUPLEX COPY
"
Manufacturer’s default settings appear in bold.
PAPER PRIORITY
Setting
TRAY1 / TRAY2 / TRAY3
Specify the paper tray that is normally used.
" If an optional lower feeder unit is not installed,
TRAY3 does not appear.
QUALITY PRIORITY
Setting
MIX , TEXT , PHOTO , FINE/MIX ,
FINE/TEXT , FINE/PHOTO
Select the type of document being copied.
If MIX or FINE/MIX is selected, select either AUTO
ON or AUTO OFF for the auto segmentation (The density is darkened for text.).
48
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
DENSITY PRIORITY
Setting
DENSITY
LEVEL
Setting
AUTO
AUTO / MANUAL
Select the density that is normally used.
(LIGHT)
(DARK)
Adjust the density of the background color.
MANUAL Setting
(LIGHT)
(DARK)
Specify the default copy density.
OUTPUT PRIOR- Setting
NON-SORT / SORT
ITY
Select whether or not to sort copies by sets.
4IN1 COPY
ORDER
Setting
DUPLEX COPY
Setting
SIDEWISE / DOWNWARD
Select the arrangement of scanned documents with
4in1 copying.
OFF / LONG EDGE / SHORT EDGE
Select the default setting for duplex (double-sided)
copying.
If OFF is selected, duplex (double-sided) copying is
not performed as a default.
If LONG EDGE is selected, duplex (double-sided)
copying is performed as a default, and the pages are
fed out with the binding along the long side.
If SHORT EDGE is selected, duplex (double-sided)
copying is performed as a default, and the pages are
fed out with the binding along the short side.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
49
ADDRESS REGISTER Menu
ADDRESS REGISTER
FAVORITE
ADDRESS
GROUP
FAVORITE
Register frequently used e-mail addresses in the
favorite list. Instead of being entered manually,
e-mail addresses can simply be recalled to ensure
that destination information is registered correctly.
A maximum of 20 destinations can be registered in
the favorite list.
ADDRESS
Register frequently used e-mail addresses as
address destinations. Instead of being entered
manually, e-mail addresses can simply be recalled
to ensure that destination information is registered
correctly.
A maximum of 250 address destinations can be
registered.
For details, refer to and “Registering Address Destinations (Direct Input)” on page 170 and “Registering Address Destinations (LDAP Search)” on page
171.
GROUP
Register frequently used broadcast destinations as
a group destination. Multiple destinations can be
recalled simply by selecting a registered group.
A maximum of 50 destinations can be registered
with one group destination.
A maximum of 9 group destinations can be registered.
For details, refer to “Registering Group Destinations” on page 174.
50
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
REPORTING Menu
REPORTING
"
TX RESULT REPORT
Manufacturer's default settings appear in bold.
TX RESULT
REPORT
Setting
ON / ON(ERROR) / OFF
Select whether the report showing the result of a transmission is printed automatically after the transmission
is finished.
ON: Prints the report after each transmission.
ON(ERROR): Prints the report after a transmission
only if an error occurred.
OFF: Does not print the report after each transmission,
even if an error has occurred.
The transmission result report is normally printed after
a broadcast transmission.
SCAN SETTING Menu
SCAN SETTING
RESOLUTION
IMAGE FORMAT
CODING METHOD
FILE SIZE
QUALITY PRIORITY
DENSITY LEVEL
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
51
"
Manufacturer’s default settings appear in bold.
RESOLUTION
Setting
150×150dpi / 300×300dpi /
600×600dpi
Select the default scanning resolution for scan to
E-mail operations.
" When using the ADF to scan in color or
grayscale, 300×300dpi is automatically
selected, even if the resolution was set to
600×600dpi.
IMAGE FORMAT
Setting
TIFF / PDF / JPEG
Select the default format for saving files with scan to
E-mail operations.
" PDF data can be opened in Adobe Acrobat
Reader.
" TIFF files of images that have been scanned
with the Color or Gray setting cannot be
opened with the Windows Picture and FAX
Viewer, which is included with Windows XP as a
standard component. These files can be opened
with image-processing applications such as
PhotoShop, Microsoft Office Document Imaging
or ACDsee.
CODING METHOD Setting
MH / MR / MMR
Select the default compression method for scan to
E-mail operations.
The compression ratio for these methods increases in
the following order: MH > MR > MMR.
" These settings are available only if BW Only
was selected for the color setting during the
e-mail transmission.
52
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
FILE SIZE
Setting
NO SPLIT / SPLIT
Select whether or not to limit the size for scan data
sent as e-mail attachments.
If SPLIT is selected, specify the maximum size
between 1 and 10 Mb. If the data to be sent exceeds
the maximum size allowed, the data is divided and
sent as multiple attached files.
" In order to receive multiple file attachments, an
e-mail application compatible with divided
transmissions is required.
QUALITY PRIORITY
Setting
MIX / TEXT / PHOTO
Select the scan data quality that is used as a default.
DENSITY LEVEL Setting
(LIGHT)
(DARK)
Select the scan data density that is used as a default.
DIRECT PRINT Menu
"
This menu item appears when UTILITY/ADMIN. MANAGEMENT/
CAMERA DIRECT is set to ENABLE.
DIRECT PRINT
IMAGE QUALITY
PAPER SIZE
TRAY1 PAPER
TRAY2 PAPER
N-UP LAYOUT
"
Manufacturer's default settings appear in bold.
IMAGE
QUALITY
Setting
NORMAL / FINE
Select the image quality used with camera direct printing.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
53
PAPER
SIZE
TRAY1
PAPER
Media
type
PLAIN PAPER / THICK PAPER /
THICK PAPER2 / LABELS / POSTCARD / GLOSSY / GLOSSY2
Paper
size
When a setting other than POSTCARD is selected: LETTER / A4 /
A5 / STATEMENT / B5
When POSTCARD is selected: LETTER / A4 / A5 / STATEMENT / B5 /
J-POSTCARD 100×148
When GLOSSY or GLOSSY2 is
selected: LETTER / A4 / A5 /
STATEMENT / B5 / PHOTO SIZE
4X6 / PHOTO SIZE 10X15 / LTR
2UP SPL / A4 4UP SPL / A4 2UP
SPL
Select the media type and paper size when using
Tray 1 with camera direct printing.
When a media type is selected, a screen
appears, showing the available media sizes. The
available media sizes differ depending on the
selected media type.
TRAY2
PAPER
Paper
size
LETTER / A4
Select the paper size when using Tray 2 with
camera direct printing.
Only plain paper can be loaded into Tray 2.
N-UP
LAYOUT
54
Setting
1/2/3/4/6/8
Select the number of images that will be printed on a single
page with camera direct printing.
Configuration Menu Overview
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
To display the PS/PCL PRINT menu, select PS/PCL PRINT in the main
screen (Copy mode), and then press the Select key. From this menu, jobs
stored on the machine's hard disk (optional) can be printed or deleted, and
various PS/PCL printing settings can be changed.
The PS/PCL PRINT menu is structured as shown below.
" To return to the previous screen in the PS/PCL PRINT menu, press the Back
key. (If the Back key is pressed while settings are being specified, those
settings are not saved.)
PROOF/PRINT MENU*1
PS/PCL PRINT
PAPER MENU
QUALITY MENU
SYS DEFAULT MENU
"
*1
This menu item appears only if an optional hard disk drive is installed.
PROOF/PRINT MENU
From this menu, jobs stored on the machine's hard disk (optional) can be
printed or deleted.
" This menu item appears only if an optional hard disk drive is installed.
PROOF/PRINT
MENU
(user name)
(job name)
PRINT
DELETE
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
55
" If no jobs have been stored on the hard disk, the message NO
JOB appears when PROOF/PRINT MENU is selected.
PRINT
STORED
Follow the procedure described below to print the
selected job.
1. If a password has been specified for the
selected job, type in the password, and then
press the Select key.
2. Specify the number of copies (1 to 9999),
and then press the Select key.
3. To print color copies, press the Start-Color
key. To print monochrome copies, press the
Start-B&W key.
DELETE
Follow the procedure described below to delete the
selected job.
1. If a password has been specified for the
selected job, type in the password, and then
press the Select key.
2. Select YES, and then press the Select key.
56
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
PAPER MENU
PAPER MENU
ANY TRAY SETTING
TRAY1 PAPER
TRAY1 ANY SIZE
TRAY1 ANY TYPE
TRAY2 PAPER
TRAY2 ANY SIZE
TRAY2 ANY TYPE
TRAY3 PAPER*1
TRAY3 ANY TYPE
TRAY CHAINING
TRAY MAPPING
TRAY MAPPING MD.
LOGICAL TRAY0
•
•
•
•
LOGICAL TRAY9
DUPLEX
COPIES
COLLATE*2
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
57
"
*1
*2
This menu item appears only if an optional lower feeder unit is installed.
This menu item appears only if an optional hard disk drive is installed.
" Manufacturer's default settings appear in bold.
ANY TRAY TRAY1
SETTING PAPER
TRAY2
PAPER
TRAY3
PAPER
TRAY CHAINING
TRAY1
ANY
SIZE
Setting
TRAY1
ANY
TYPE
Setting
TRAY2
ANY
SIZE
Setting
TRAY2
ANY
TYPE
Setting
TRAY3
ANY
TYPE
Setting
ON / OFF
Select whether or not the Any Paper
Size setting is selected for Tray 1.
ON / OFF
Select whether or not the Any Media
Type setting is selected for Tray 1.
ON / OFF
Select whether or not the Any Paper
Size setting is selected for Tray 2.
ON / OFF
Select whether or not the Any Media
Type setting is selected for Tray 2.
ON / OFF
Select whether or not the Any Media
Type setting is selected for Tray 3.
Setting
ON / OFF
If ON is selected and the specified tray
runs out of paper during printing, a tray
loaded with paper of the same size is
automatically selected so printing can
continue.
If OFF is selected and the specified tray
runs out of paper, printing stops.
58
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
TRAY
MAPPING
TRAY MAPPING
MD.
Setting
LOGICAL TRAY
Setting
ON / OFF
Select whether or not the Tray Mapping
function is used.
0-9
PHYSICAL TRAY1 /
PHYSICAL TRAY2 /
PHYSICAL TRAY3
Select the tray that is used for printing
when a print job is received from
another manufacturer's printer driver.
The default settings are PHYSICAL
TRAY1 for LOGICAL TRAY1 and
PHYSICAL TRAY2 for other trays.
" PHYSICAL
TRAY3 appears
only if an optional lower feeder
unit is installed.
DUPLEX
Setting
OFF / LONG EDGE /
SHORT EDGE
If LONG EDGE is selected, the pages
will be printed on both sides of the
paper for long-edge binding.
If SHORT EDGE is selected, the pages
will be printed on both sides of the
paper for short-edge binding.
The setting specified in the printer driver
will override this menu setting.
COPIES
Setting
1 to 9999 (Default: 1)
Specify the number of copies to be
printed.
The setting specified in the printer driver
will override this menu setting.
COLLATE
Setting
ON / OFF
Select whether or not to enable collated
(sort) printing.
The setting specified in the printer driver
will override this menu setting.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
59
QUALITY MENU
QUALITY
MENU
COLOR MODE
BRIGHTNESS
HALFTONE
IMAGE
PRINTING
TEXT
PRINTING
GRFX.
PRINTING
EDGE
ENHANCEMENT
IMAGE
PRINTING
TEXT
PRINTING
GRFX.
PRINTING
EDGE
STRENGTH
ECONOMY
PRINT
PCL SETTING
CONTRAST
IMAGE
PRINTING
60
Downloaded from ManualsPrinter.com Manuals
RGB SOURCE
PS/PCL PRINT Menu
RGB INTENT
RGB GRAY
TEXT
PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
GRFX.
PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
PS SETTING
IMAGE
PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION PROF
TEXT
PRINTING
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
RGB SOURCE
61
RGB INTENT
RGB GRAY
DESTINATION PROF
GRFX.
PRINTING
RGB SOURCE
RGB INTENT
RGB GRAY
DESTINATION PROF
SIMULATION
SIMULATION
PROF
SIM. INTENT
CMYK GRAY
CALIBRATION
TONE CALIBRATION
CMYK DENSITY
CYAN
HIGHLIGHT
MIDDLE
62
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
SHADOW
MAGENTA
HIGHLIGHT
MIDDLE
SHADOW
YELLOW
HIGHLIGHT
MIDDLE
SHADOW
BLACK
HIGHLIGHT
MIDDLE
SHADOW
COLOR SEPARATION
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
63
" Manufacturer's default settings appear in bold.
COLOR
MODE
Setting
COLOR/GRAYSCALE
If COLOR is selected, the pages are printed in full color.
If GRAYSCALE is selected, the pages are printed in black
and white.
BRIGHTNESS
Setting
+15%/+10%/+5%/0%/-5%/-10%/
-15%
The brightness of the printed image can be adjusted.
HALFTONE
IMAGE
PRINTING
Setting
LINE ART/DETAIL/
SMOOTH
Select how halftones in images are
reproduced.
If LINE ART is selected, halftones are
reproduced with high precision.
If DETAIL is selected, halftones are
reproduced with detail.
If SMOOTH is selected, halftones are
reproduced with smoothness.
64
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
TEXT
PRINTING
Setting
LINE ART/DETAIL/
SMOOTH
Select how halftones in text are
reproduced.
If LINE ART is selected, halftones are
reproduced with high precision.
If DETAIL is selected, halftones are
reproduced with detail.
If SMOOTH is selected, halftones are
reproduced with smoothness.
GRFX.
PRINTING
Setting
LINE ART/DETAIL/
SMOOTH
Select how halftones in graphics are
reproduced.
If LINE ART is selected, halftones are
reproduced with high precision.
If DETAIL is selected, halftones are
reproduced with detail.
If SMOOTH is selected, halftones are
reproduced with smoothness.
EDGE
ENHANCEMENT
IMAGE
PRINTING
Setting
ON/OFF
Select whether image edges are
emphasized.
If ON is selected, the edges are emphasized.
If OFF is selected, the edges are not
emphasized.
" If ECONOMY
PRINT is set to ON,
the edges cannot be emphasized.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
65
TEXT
PRINTING
Setting
ON/OFF
Select whether text edges are
emphasized.
If ON is selected, the edges are emphasized.
If OFF is selected, the edges are not
emphasized.
GRFX.
PRINTING
Setting
ON/OFF
Select whether graphic edges are
emphasized.
If ON is selected, the edges are emphasized.
If OFF is selected, the edges are not
emphasized.
" If ECONOMY
PRINT is set to ON,
the edges cannot be emphasized.
EDGE
STRENGTH
Setting
OFF/LOW/MIDDLE/HIGH
Select the desired amount that edges are emphasized.
If OFF is selected, the edges are not emphasized.
If LOW is selected, the edges are slightly emphasized.
If MIDDLE is selected, the edges are emphasized by an
average amount.
If HIGH is selected, the edges are highly emphasized.
" If OFF is selected, the edges are not emphasized,
even if an EDGE ENHANCEMENT menu item is set
to ON.
66
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
ECONOMY
PRINT
Setting
ON/OFF
Select whether to print graphics with a reduced density by
reducing the amount of toner that is used.
If ON is selected, the amount of toner used is reduced when
printing.
If OFF is selected, the amount of toner used is not reduced
when printing.
" If ON is selected, the edges are not emphasized, even
if IMAGE PRINTING and GRFX. PRINTING of
the EDGE ENHANCEMENT menu item are set to ON.
PCL
SETTING
CONTRAST
Setting
+15%/+10%/+5%/0%/
-5%/-10%/-15%
The contrast of the image can be
adjusted.
IMAGE
PRINTING
Setting
RGB
SOURCE
DEVICE COLOR/
sRGB
Specify the color space for
RGB image data.
If DEVICE COLOR is
selected, no color space is
specified.
RGB source profiles
downloaded with the
Web-based EpsonNet config
are available as RGB
SOURCE.
Setting
RGB
INTENT
VIVID/
PHOTOGRAPHIC
Specify the characteristic
applied when converting RGB
image data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
67
RGB
GRAY
Setting
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
TEXT
PRINTING
Setting
RGB
SOURCE
DEVICE COLOR/
sRGB
Specify the color space for
RGB text data.
If DEVICE COLOR is
selected, no color space is
specified.
RGB source profiles
downloaded with the
Web-based EpsonNet config
are available as RGB
SOURCE.
68
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
Setting
RGB
INTENT
VIVID/
PHOTOGRAPHIC
Specify the characteristic
applied when converting RGB
text data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
RGB
GRAY
Setting
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB text
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
GRFX.
PRINTING
Setting
RGB
SOURCE
DEVICE COLOR/
sRGB
Specify the color space for
RGB graphics data.
If DEVICE COLOR is
selected, no color space is
specified.
RGB source profiles
downloaded with the
Web-based EpsonNet config
are available as RGB
SOURCE.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
69
Setting
RGB
INTENT
VIVID/
PHOTOGRAPHIC
Specify the characteristic
applied when converting RGB
graphics data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
RGB
GRAY
Setting
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB
graphics data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
70
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
PS
SETTINGS
IMAGE
PRINTING
Setting
RGB
SOURCE
DEVICE COLOR/
sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB/
BlueAdjustRGB
Specify the color space for
RGB image data.
If DEVICE COLOR is
selected, no color space is
specified.
RGB source profiles
downloaded with the
Web-based EpsonNet config
are available as RGB
SOURCE.
Setting
RGB
INTENT
VIVID/
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic
applied when converting RGB
image data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
If RELATIVE COLOR is
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the RGB source
profile.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
71
RGB
GRAY
Setting
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB image
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
DESTI- Setting AUTO
NATION Specify the destination profile.
PROF
If AUTO is selected, a
destination profile that the
machine automatically adapts
is selected based on a
combination of the specified
color matching, halftones and
other profiles.
Destination profiles
downloaded with the
Web-based EpsonNet config
are available as DESTINATION
PROF.
72
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
TEXT
PRINTING
Setting
RGB
SOURCE
DEVICE COLOR/
sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB/
BlueAdjustRGB
Specify the color space for
RGB text data.
If DEVICE COLOR is
selected, no color space is
specified.
RGB source profiles
downloaded with the
Web-based EpsonNet config
are available as RGB
SOURCE.
Setting
RGB
INTENT
VIVID/
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic
applied when converting RGB
text data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
If RELATIVE COLOR is
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the RGB source
profile.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
73
RGB
GRAY
Setting
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB text
data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
DESTI- Setting AUTO
NATION Specify the destination profile.
PROF
If AUTO is selected, a
destination profile that the
machine automatically adapts
is selected based on a
combination of the specified
color matching, halftones and
other profiles.
Destination profiles
downloaded with the
Web-based EpsonNet config
are available as DESTINATION
PROF.
74
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
GRFX.
PRINTING
Setting
RGB
SOURCE
DEVICE COLOR/
sRGB/
AppleRGB/
AdobeRGB1998/
ColorMatchRGB/
BlueAdjustRGB
Specify the color space for
RGB graphics data.
If DEVICE COLOR is
selected, no color space is
specified.
RGB source profiles
downloaded with the
Web-based EpsonNet config
are available as RGB
SOURCE.
Setting
RGB
INTENT
VIVID/
PHOTOGRAPHIC/
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic
applied when converting RGB
graphics data to CMYK data.
If VIVID is selected, a vivid
output is produced.
If PHOTOGRAPHIC is
selected, a brighter output is
produced.
If RELATIVE COLOR is
selected, relative color is
applied to the RGB source
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the RGB source
profile.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
75
RGB
GRAY
Setting
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced in RGB
graphics data.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
DESTI- Setting AUTO
NATION Specify the destination profile.
PROF
If AUTO is selected, a
destination profile that the
machine automatically adapts
is selected based on a
combination of the specified
color matching, halftones and
other profiles.
Destination profiles
downloaded with the
Web-based EpsonNet config
are available as DESTINATION
PROF.
76
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
SIMULATION
SIMU- Setting
LATION
PROF
NONE/SWOP/
Euroscale/
CommercialPre
ss/TOYO/DIC
Specify the simulation profile.
If NONE is selected, no
simulation profile is specified.
Simulation profiles downloaded
with the Web-based EpsonNet
config are available as
SIMULATION PROF.
Setting
SIM.
INTENT
RELATIVE
COLOR/
ABSOLUTE
COLOR
Specify the characteristic of the
simulation profile.
If RELATIVE COLOR is
selected, relative color is
applied to the simulation
profile.
If ABSOLUTE COLOR is
selected, absolute color is
applied to the simulation
profile.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
77
CMYK
GRAY
Setting
COMPOSITE
BLACK/BLACK
AND GRAY/
BLACK ONLY
Specify how black and grays
are reproduced using the four
CMYK colors.
If COMPOSITE BLACK is
selected, black is reproduced
using the CMYK colors.
If BLACK AND GRAY is
selected, black and gray are
reproduced using black only.
If BLACK ONLY is selected,
black is reproduced using only
black.
CALIBRATION
Setting
TONE
ON/OFF
CALIBRATION If ON is selected, image adjustments are
applied.
If OFF is selected, image adjustments are
not applied.
78
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
CMYK
DENSITY
CYAN/ HIGHMAGENTA/ LIGHT
YELLOW/
BLACK
Setting
+3/+2/
+1/0/
-1/-2/
-3
The density of the
highlight color in
images can be
adjusted.
MIDDLE Setting
+3/+2/
+1/0/
-1/-2/
-3
The density of the
middle color in
images can be
adjusted.
SHADOW Setting
+3/+2/
+1/0/
-1/-2/
-3
The density of the
shadow color in
images can be
adjusted.
COLOR
SEPARATION
Setting
ON/OFF
If ON is selected, color separation are performed. The
contents of a color page is separated into the color pages
for yellow, magenta, cyan and black, and each is printed
with black gradations as individual pages. The printing order
is yellow, magenta, cyan, then black.
If OFF is selected, color separation is not performed. A
normal color separation is performed.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
79
SYS DEFAULT MENU
SYS DEFAULT
MENU
EMULATION
DEF. EMULATION
POSTSCRIPT
WAIT TIMEOUT
PS ERROR
PAGE
PS PROTOCOL
PCL
CR/LF MAPPING
LINES PER
PAGE
FONT SOURCE
FONT NUMBER
PITCH SIZE
(POINT
SIZE)
SYMBOL SET
PAPER
DEFAULT
PAPER
PAPER SIZE
CUSTOM SIZE
PAPER TYPE
80
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
GRAYSCALE
PAGE
STARTUP
OPTIONS
DO STARTUP
PAGE
HOLD JOB
TIMEOUT*1
HDD FORMAT*1
USER AREA
ONLY
ALL
"
*1
This menu item appears only if an optional hard disk drive is installed.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
81
" Manufacturer's default settings appear in bold.
Setting
EMULA- DEF.
AUTO/POSTSCRIPT/PCL
TION
EMULA- Specify the machine emulation language.
TION
If AUTO is selected, the machine automatically
selects the machine emulation language from the
data stream.
POST- WAIT
SCRIPT TIME
OUT
Setting
0 to 300 (Default: 0)
Specify the time until an error is
determined to be a PostScript error.
If 0 is selected, no timeout is performed.
PS
ERROR
PAGE
Setting
ON/OFF
Select whether or not an error page is
printed when a Postscript error occurs.
Setting
PS
AUTO/NORMAL/BINARY
PROTO- Specify the protocol for data transmissions
COL
with a PostScript data stream.
If AUTO is selected, the machine
automatically selects an applicable
protocol from the data stream.
82
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
PCL
CR/LF
MAPPING
Setting
CR=CR LF=LF/CR=CRLF
LF=LF/CR=CR
LF=LFCR/CR=CRLF
LF=LFCR
Select the definitions of the CR/LF codes
in the PCL language.
LINES
PER
PAGE
Setting
5 to 128 (Default: 60)
Specify the number of lines per page in the
PCL language.
Setting
FONT
FONT
SOURCE NUMBER
0 to 102 (Default:
0)
Specify the default font in the
PCL language.
The font numbers that appear
correspond to the PCL font list.
For details on printing the font
list, refer to “REPORT” on page
24.
PITCH Setting
SIZE
(POINT
SIZE)
0.44 to 99.99
(Default: 10.00)
(4.00 to 999.75
(Default: 12.00))
Specify the font size in the PCL
language.
If the selected FONT NUMBER
is for a bitmap font, PITCH
SIZE appears. If the selected
FONT NUMBER is for an
outline font, POINT SIZE
appears.
SYMBOL Specify the symbol set used
with the PCL language.
SET
The default setting is PC8.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
83
PAPER
DEFAULT PAPER
PAPER SIZE
Setting
LETTER/LEGAL/EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK
QUARTO/FOOLSCAP/GOVT
LEGAL/16K/PHOTO 4×6/
KAI 16/KAI 32/ENV C6/
ENV DL/ENV MONARCH/
ENV CHOU#3/ENV
CHOU#4/B5(ISO)/ENV
#10/JPOST 100x148/
JPOST-D 148x200/CUSTOM
Select the size of media that is normally
used.
" Depending on the setting selected
for UTILITY / ADMIN.
MANAGEMENT / USER
SETTING / PRESET ZOOM,
PHOTO 4×6 may change to
PHOTO 10×15.
CUSTOM Specify the media size when PAPER
SIZE is set to CUSTOM The Setting range
SIZE
for WIDTH is 3.63 to 8.50 inches (92
to 216 mm).
The default setting is 8.27 inches (210
mm).
The Setting range for LENGTH is 5.83 to
14.00 inches (148 to 356 mm).
The default setting is 11.69 inches (297
mm).
84
Downloaded from ManualsPrinter.com Manuals
PS/PCL PRINT Menu
PAPER
TYPE
Setting
PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/LABEL/
TRANSPARENCY/
ENVELOPE/POSTCARD/
LETTERHEAD/GLOSSY 1/
GLOSSY 2
Select the type of media that is normally
used.
GRAYSCALE
PAGE
Setting
AUTO/GRAYSCALE PRINT/COLOR PRINT
Specify the operation to be performed for black-and-white
pages in a job specified for color printing.
If AUTO is selected, printing is automatically performed according to the first page of the job.
If GRAYSCALE PRINT is selected, black-and-white printing is
automatically performed depending on each page.
If COLOR PRINT is selected, color printing is performed, even
for a black-and-white page.
Setting
STARTUP DO
ON/OFF
OPTIONS START- Select whether or not a startup page is printed when
UP
the machine is turned on.
PAGE
HOLD
JOB
TIME
OUT
Setting
DISABLE/1 hour/4 hours/1 day/1 week
Specify the length of time until print jobs saved on the hard disk
are deleted. If DISABLE is selected, print jobs are not deleted
at a specific time.
HDD
USER
FORMAT AREA
ONLY
ALL
Initialize the user area of the hard disk. When this
menu item is selected, the machine is automatically
restarted.
Initialize the hard disk. When this menu item is
selected, the machine is automatically restarted.
PS/PCL PRINT Menu
Downloaded from ManualsPrinter.com Manuals
85
MEMORY PRINT Menu
To display the MEMORY PRINT menu, select MEMORY PRINT in the main
screen (Copy mode), and then press the Select key. From this menu, memory direct printing operations can be performed, and various memory direct
printing settings can be specified.
The MEMORY PRINT menu is structured as shown below.
" This menu item appears only if an optional hard disk drive is installed. In
addition this menu item does not appear if public user access has not been
permitted through authentication settings. For details on the authentication
settings, refer to the Reference Guide on the software CD-ROM.
MEMORY PRINT
LIST OF FILES
TYPE OF FILES
" Manufacturer's default settings appear in bold
86
Downloaded from ManualsPrinter.com Manuals
MEMORY PRINT Menu
.
LIST
OF
FILES
Select the file that you wish to output, and then press the Select
key.
If the file to be printed is in a folder, select the folder, and then
press the Select key.
PAPER
SELECT
Setting
LETTER/LEGAL/EXECUTIVE/A4/
A5/A6/B5(JIS)/B6(JIS)/GOVT
LETTER/STATEMENT/FOLIO/SP
FOLIO/UK QUARTO/FOOLSCAP/
GOVT LEGAL/16K/PHOTO 4×6/
KAI 16/KAI 32/ENV C6/ENV
DL/ENV MONARCH/ENV CHOU#3/
ENV CHOU#4/B5(ISO)/ENV #10/
JPOST 100×148/JPOST-D
148×200/CUSTOM
Change the size of the paper.
" Depending on the setting selected for
UTILITY / ADMIN. MANAGEMENT /
USER SETTING / PRESET ZOOM,
PHOTO 4×6 may change to PHOTO
10×15.
" This menu item does not appear if the
selected file is PDF file.
SIMPLEX/ Setting 1-SIDE/2-SIDE
DUPLEX
If 2-SIDE is selected, you can get duplex printing.
If LONG EDGE is selected, the page will be printed
on both sides of the paper for long edge binding.
If SHORT EDGE is selected, the page will be
printed on both sides of the paper for short edge
binding.
If OFF is selected, duplex printing is not performed.
MEMORY PRINT Menu
Downloaded from ManualsPrinter.com Manuals
87
LIST
OF
FILES
Setting
COPY
1 to 9999 (Default: 1)
QUANTITY Specify the number of copies to be printed (between
1 and 9999).
Setting
COPY
NON-SORT/SORT
FINISHIN Select whether to collate the copies.
G
If NON-SORT is selected, collated printing is not
performed.
If SORT is selected, collated printing is performed.
" This menu item appears only if the optional
hard disk drive is installed.
TYPE
OF
FILES
Setting
PDF,JPEG,TIFF/PDF
Select the type of files to be displayed.
88
Downloaded from ManualsPrinter.com Manuals
MEMORY PRINT Menu
3Media Handling
Downloaded from ManualsPrinter.com Manuals
Print Media
Specifications
Media
Media Size
Tray*
Duplex
Copy
Print
210.0 x 297.0 1/2/3
Yes
Yes
Yes
182.0 x 257.0 1/2/3
Yes
Yes
Yes
148.0 x 210.0 1/2
No
Yes
Yes
Inch
Millimeter
A4
8.2 x 11.7
B5 (JIS)
7.2 x 10.1
A5
5.9 x 8.3
B6
7.2 x 5.0
182.0 x 128.0 1/2
No
No
Yes
A6
10.1 x 4.1
257.0 x 105.0 1/2
No
No
Yes
Legal
8.5 x 14.0
215.9 x 355.6 1/3
Yes
Yes
Yes
Letter
8.5 x 11.0
215.9 x 279.4 1/2/3
Yes
Yes
Yes
Statement
5.5 x 8.5
139.7 x 215.9 1/2
Executive
7.25 x 10.5 184.2 x 266.7 1/2/3
No
Yes
Yes
Yes
Yes
Yes
Folio
8.25 x 13.0 210.0 x 330.0 1
Yes
Yes
Yes
Letter Plus
8.5 x 12.69 215.9 x 322.3 1
Yes
No
Yes
UK Quarto
8.0 x 10.0
203.2 x 254.0 1/2
No
No
Yes
Foolscap
8.0 x 13.0
203.2 x 330.2 1
Yes
No
Yes
Government Legal 8.5 x 13.0
215.9 x 330.2 1/3
Yes
Yes
Yes
Kai 16
7.3 x 10.2
185.0 x 260.0 1/2
Yes
No
Yes
Kai 32
5.1 x 7.3
Yes
130.0 x 185.0 1/2
No
No
Government letter 8.0 x 10.5
203.2 x 266.7 1/2
Yes
Yes
Yes
16 K
7.7 x 10.6
195.0 x 270.0 1/2
Yes
No
Yes
Oficio**
8.5 x 13.5
215.9 x 342.9 1
Yes
Yes
Yes
Photo size 4x6"
4.0 x 6.0
101.6 x 152.4 1/2
No
No
Yes
Photo size 10x15
3.9 x 5.9
100.0 x 150.0 1/2
No
No
Yes
J-Postcard
3.9 x 5.8
100.0 x 148.0 1
No
Yes
Yes
Double Postcard
5.8 x 7.9
148.0 x 200.0 1
No
Yes
Yes
B5 (ISO)
6.9 x 9.8
176.0 x 250.0 1
No
No
Yes
Envelope Com10
4.125 x 9.5 104.8 x 241.3 1
No
Yes
Yes
Envelope DL
8.7 x 4.3
No
Yes
Yes
Yes
220.0 x 110.0 1
Envelope Monarch 7.5 x 3.875 190.5 x 98.4
1
No
Yes
6.4 x 4.5
162.0 x 114.0 1
No
Yes
Yes
Envelope Chou #3 4.7 x 9.2
120.0 x 235.0 1
No
Yes
Yes
Envelope C6
Envelope You #6
7.5 x 3.875 190.5 x 98.4
1
No
No
Yes
Custom,
Minimum
3.6 x 5.9
92.0 x 148.0
1/2
Yes****
Yes
Yes
Custom,
Maximum
8.5 x 14.0
216.0 x 356.0 1/2***
Yes
Yes
Yes
Thick Stock—Only supported for letter, A4, and smaller media.
Notes:
*Tray 1 = Multipurpose
Tray 2/3 = Plain paper only
**Oficio = Mexico only
***Tray 2 = 216.0 x 297.0
****182.0 x 257.0
90
Downloaded from ManualsPrinter.com Manuals
Print Media
Types
Before purchasing a large quantity of special media, do a trial print with the
same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Plain Paper (Recycled Paper)
Capacity
Orientation
Tray 1
Up to 100 sheets, depending on the media
weight
Tray 2
Up to 250 sheets, depending on the media
weight
Tray 3
Up to 500 sheets, depending on the media
weight
Tray 1
Face down
Tray 2/3
Face up
Driver
Plain Paper (Recycled)
Media Type
Weight
60 to 90 g/m² (16 to 24 lb bond)
Duplexing
Refer to “Specifications” on page 90.
Use plain paper that is
„ Suitable for plain paper printers and copiers, such as standard or recycled
office paper.
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the machine.
DO NOT use media that is
„ Coated with a processed surface (such as carbon paper and colored
paper that has been treated)
„ Carbon backed
„ Unapproved iron-on transfer media (such as heat-sensitive paper,
heat-pressure paper, and heat-press transfer paper)
„ Cold-water-transfer paper
„ Pressure sensitive
Print Media
Downloaded from ManualsPrinter.com Manuals
91
„ Designed specifically for inkjet printers (such as superfine paper, glossy
film, and postcards)
„ Already been printed on by another printer or copier
„ Dusty
„ Wet (or damp)
"
Keep media between 15% and 85% relative humidity. Toner does
not adhere well to moist or wet media.
„ Layered
„ Adhesive
„ Folded, creased, curled, embossed, warped, or wrinkled
„ Perforated, three-hole punched, or torn
„ Too slick, too coarse, or too textured
„ Different in texture (roughness) on the front and back
„ Too thin or too thick
„ Stuck together with static electricity
„ Composed of foil or gilt; too luminous
„ Heat sensitive or cannot withstand the fusing temperature (205°C
[401°F])
„ Irregularly shaped (not rectangular or not cut at right angles)
„ Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
„ Acidic
„ Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
You can print continuously with thick stock. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Capacity
Tray 1
Up to 20 sheets, depending on their thickness
Tray 2/3
Not supported
Orientation Face down
92
Downloaded from ManualsPrinter.com Manuals
Print Media
Driver
Thick Stock 1
Media Type
Thick Stock 2
Weight
91 to 210 g/m² (25 to 55.9 lb bond)
Duplexing
Not supported
DO NOT use thick stock that is
„ Mixed with any other media in the trays (as this will cause media misfeeding)
Envelope
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these layered regions may be lost or faded.
You can print continuously with envelope. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Capacity
Tray 1
Up to 10 sheets, depending on their thickness
Tray 2/3
Not supported
Orientation Face down
Driver
Envelope
Media Type
Weight
91 to 163 g/m2 (25 to 43 lb bond)
Duplexing
Not supported
Use envelopes that are
„ Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
"
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
„ Approved for laser printing
„ Dry
Print Media
Downloaded from ManualsPrinter.com Manuals
93
DO NOT use envelopes that have
„ Sticky flaps
„ Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for sealing
„ Transparent windows
„ Too rough of a surface
„ Material that will melt, vaporize, offset, discolor, or emit dangerous fumes
„ Been presealed
Label
A sheet of labels consists of a face sheet (the printing surface), adhesive, and
a carrier sheet:
„ The face sheet must follow the plain paper specification.
„ The face sheet surface must cover the entire carrier sheet, and no adhesive should come through on the surface.
You can print continuously with label sheets. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Check your application documentation for more information on printing labels.
Capacity
Tray 1
Up to 20 sheets, depending on their thickness
Tray 2/3
Not supported
Orientation Face down
Driver
Labels
Media Type
Weight
60 to 163 g/m2 (16 to 43 lb bond)
Duplexing
Not supported
Use label sheets that are
„ Recommended for laser printing
DO NOT use label sheets that
„ Have labels that easily peel off or have parts of the label already removed
„ Have backing sheets that have peeled away or have exposed adhesive
94
Downloaded from ManualsPrinter.com Manuals
Print Media
"
Labels may stick to the fuser, causing them to peel off and media
misfeeds to occur.
„ Are precut or perforated
Do not use
OK to use
Shiny backed paper
Full-page labels
(uncut)
Letterhead
You can print continuously with letterhead. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Capacity
Tray 1
Up to 20 sheets, depending on their size and
thickness
Tray 2/3
Not supported
Orientation Face down
Driver
Letterhead
Media Type
Weight
60 to 90 g/m2 (16 to 24 lb bond)
Duplexing
Refer to “Specifications” on page 90.
Postcard
You can print continuously with postcard. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Try printing your data on a sheet of plain paper first to check placement.
Capacity
Tray 1
Up to 20 sheets, depending on their thickness
Tray 2/3
Not supported
Print Media
Downloaded from ManualsPrinter.com Manuals
95
Orientation Face down
Driver
Postcard
Media Type
Weight
60 to 163 g/m2 (16 to 43 lb bond)
Duplexing
Not supported
Use postcards that are
„ Approved for laser printing
DO NOT use postcards that are
„ Coated
„ Designed for inkjet printers
„ Precut or perforated
„ Preprinted or multicolored
"
If the postcard is warped, press on the warped
area before putting it in the tray.
„ Folded or wrinkled
Transparency
"
"
"
"
Do not fan transparencies before loading them. Resulting static electricity may cause printing errors.
If you touch the face of the transparencies with your bare hands, print
quality may be affected.
Keep the media path clean. Transparencies are especially sensitive to
a dirty media path. If there are shadows on either the top or the bottom
of the sheets, see chapter 10, “Maintenance”.
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
96
Downloaded from ManualsPrinter.com Manuals
Print Media
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing environment.
Try printing your data on a sheet of plain paper first to check placement.
"
If you have problems feeding 20 sheets, try loading only 1–10 sheets
at a time. Loading a large number of transparencies at one time may
cause static buildup, causing feeding problems.
Capacity
Tray 1
Up to 20 sheets, depending on their thickness
Tray 2/3
Not supported
Orientation Face down
Driver
Transparency
Media Type
Duplexing
"
Not supported
Always first test a small quantity of a particular type of transparency.
Use transparencies that are
„ Approved for laser printing
DO NOT use transparencies that
„ Have static electricity that will cause them to stick together
„ Are specified for inkjet printers only
Glossy Media
Test all glossy media to ensure acceptable performance and to ensure that
the image does not shift.
You can print continuously with glossy media. However, this could affect the
media feed, depending on the media quality and printing environment. If
problems occur, stop the continuous printing and print one sheet at a time.
Capacity
Tray 1
Up to 20 sheets, depending on their thickness
Tray 2/3
Not supported
Orientation Face down
Print Media
Downloaded from ManualsPrinter.com Manuals
97
Driver
Glossy 1
Media Type
Glossy 2
Duplexing
Not supported
DO NOT use glossy media that is
„ Mixed with any other media in the trays (as this will cause media misfeeding)
„ Specified for inkjet printers only
98
Downloaded from ManualsPrinter.com Manuals
Print Media
Guaranteed Imageable (Printable) Area
The printable area on all media sizes is
up to 4 mm (0.157") from the edges of
the media.
Each media size has a specific imageable area, the maximum area on which
the machine can print clearly and without distortion.
a
a
a
Printable
Area
This area is subject to both hardware
a
limits (the physical media size and the
margins required by the machine) and
a=4.0 mm (0.157")
software constraints (the amount of
memory available for the full-page
frame buffer). The guaranteed imageable (printable) area for all media sizes
is the page size minus 4.0 mm (0.157") from all edges of the media.
Imageable Area—Envelopes
Envelopes have a nonguaranteed imageable area that varies with envelope
type.
"
"
The envelope
print orientation is determined
by your application.
Nonimageable area 4.0 mm (0.157")
Nonguaranteed area
Guaranteed
area
With the Envelope DL size
(long edge
feeding), the nonimageable areas on the left and right sides are 6 mm.
Page Margins
Margins are set through your application. Some applications allow you to set
custom page sizes and margins while others have only standard page sizes
and margins from which to choose. If you choose a standard format, you may
lose part of your image (due to imageable area constraints). If you can custom-size your page in your application, use those sizes given for the imageable area for optimum results.
Print Media
Downloaded from ManualsPrinter.com Manuals
99
Loading Media
How do I load media?
Take off the top and bottom sheets of a
ream of paper. Holding a stack of approximately 100 sheets at a time, fan the
stack to prevent static buildup before
inserting it in a tray.
"
Do not fan transparencies.
Note
Although this machine was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single media
type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, labels, thick stock, or transparencies) may
adversely affect print quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it
with the new media, even the edges, then reload it.
Tray 1 (Manual Feed Tray)
For details on the types and sizes of media that can be printed from Tray 1,
refer to “Specifications” on page 90.
Loading Plain Paper
1
Open Tray 1.
100
Downloaded from ManualsPrinter.com Manuals
Loading Media
2
3
4
Slide the media guides to provide more space between them.
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Load the paper face down in the
tray.
Loading Media
Downloaded from ManualsPrinter.com Manuals
101
"
5
6
Do not load so much
paper that the top of the
stack is higher than the
maximum limit guide. Up
to 100 sheets (80 g/m2
[22 lb]) of plain paper can
be loaded into the tray at
one time.
Slide the media guides against
the edges of the paper.
Select PAPER SETUP/TRAY1 PAPER in the UTILITY menu, and
then select the settings for the size and type of paper that is loaded. See
also “Specifications” on page 90.
Other Media
When loading media other than plain paper, set the media mode (Envelope,
Label, Letterhead, Thick 1, Thick 2, Glossy 1, Glossy 2, or Transparency) in
the driver for optimum print quality.
102
Downloaded from ManualsPrinter.com Manuals
Loading Media
Loading Envelopes
1
2
3
Open Tray 1.
Slide the media guides to provide more space between them.
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Loading Media
Downloaded from ManualsPrinter.com Manuals
103
4
Load the envelopes flap side up
in the tray.
"
"
"
5
Before loading envelopes, press them down
to make sure that all air is
removed, and make sure
that the folds of the flaps
are firmly pressed; otherwise the envelopes may
become wrinkled or a
media misfeed may
occur.
Up to 10 envelopes can be loaded into the tray at one time.
For envelopes with the
flap along the long edge
(Envelope Chou #3,
Envelope C6, Envelope
Monarch and Envelope
DL), load the envelopes
with the flap side inserted
first.
Slide the media guides against
the edges of the envelopes.
104
Downloaded from ManualsPrinter.com Manuals
Loading Media
6
Select PAPER SETUP/TRAY1 PAPER in the UTILITY menu, and
then select the settings for the size and type of media that is loaded. See
also “Specifications” on page 90.
Loading Label Sheets/Letterheads/Postcards/Thick Stock/
Glossy Media and Transparencies
1
2
Open Tray 1.
Slide the media guides to provide more space between them.
Loading Media
Downloaded from ManualsPrinter.com Manuals
105
3
4
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Load the media face down in the
tray.
"
5
6
Up to 20 sheets can be
loaded into the tray at
one time.
Slide the media guides against
the edges of the media.
Select PAPER SETUP/TRAY1 PAPER in the UTILITY menu, and
then select the settings for the size and type of media that is loaded. See
also “Specifications” on page 90.
106
Downloaded from ManualsPrinter.com Manuals
Loading Media
Tray 2
" Only plain paper can be loaded in Tray 2.
Loading Plain Paper
1
2
Pull out Tray 2.
Press down the media pressure
plate to lock it into place.
Loading Media
Downloaded from ManualsPrinter.com Manuals
107
3
4
Slide the media guides to provide more space between them.
Load the paper face up in the
tray.
"
Do not load above the mark. Up to 250 sheets
(80 g/m2 [22 lb]) of plain
paper can be loaded into
the tray at one time.
108
Downloaded from ManualsPrinter.com Manuals
Loading Media
5
6
7
Slide the media guides against
the edges of the paper.
Close Tray 2.
Select PAPER SETUP/TRAY2 PAPER in the UTILITY menu, and
then select the settings for the size of paper that is loaded. See also
“Specifications” on page 90.
Loading Media
Downloaded from ManualsPrinter.com Manuals
109
Tray 3 (Optional Lower Feeder Unit)
" Only plain paper can be loaded in Tray 3.
Loading Plain Paper
1
2
3
Pull out Tray 3.
Press down the media pressure
plate to lock it into place.
Slide the media guides to provide more space between them.
110
Downloaded from ManualsPrinter.com Manuals
Loading Media
4
Load the paper face up in the
tray.
"
5
Do not load above the mark. Up to 500 sheets
(80 g/m2 [22 lb]) of plain
paper can be loaded into
the tray at one time.
Slide the media guides against
the edges of the paper.
Loading Media
Downloaded from ManualsPrinter.com Manuals
111
6
Close Tray 3.
112
Downloaded from ManualsPrinter.com Manuals
Loading Media
About Duplex Printing
Duplex (double-sided) printing can be done with this printer, which has the
duplex unit built in as a standard. If the paper has low opacity (high translucency), then the printed data from one side of the page will show through to
the other side. Check your application for margin information. For best
results, print a small quantity to make sure the opacity is acceptable.
Note
Only plain paper, 60–90 g/m2 (16–24 lb bond) can be autoduplexed. See
“Specifications” on page 90.
Duplexing envelopes, labels, letterheads, postcards, thick stock, glossy
media or transparencies is not supported.
How do I autoduplex?
Check your application to determine how to set your margins for duplex
(double-sided) printing.
The following Binding Position settings are available.
If “Short Edge (Top)” is selected, the pages will be laid out
to flip at the top.
11
2
2
11
13
If “Long Edge (Left)” is selected, the pages will be laid out
to flip at the side.
13
About Duplex Printing
Downloaded from ManualsPrinter.com Manuals
113
In addition, if “Combination” has been set to “Booklet”, autoduplex printing is
performed.
The following Order settings are available when “Booklet” is selected.
If “Left Binding” is selected, the pages can be folded as a
left-bound booklet.
2
1
1
If “Right Binding” is selected, the pages can be folded as a
right-bound booklet.
1
2
3
3
3
1
2
3
1
Load plain paper into the tray.
From the printer driver, specify duplex (double-sided) printing (Layout tab
in Windows).
Click OK.
"
With autoduplexing, the back side is printed first, and then the front
side is printed.
114
Downloaded from ManualsPrinter.com Manuals
About Duplex Printing
Output Tray
All media is fed out facing down into the output tray on the left side of the
machine. This tray has a capacity of approximately 250 sheets (A4/Letter) of
80 g/m2 paper.
"
"
If the media is stacked too high in the output tray, your machine may
experience media misfeeds, excessive media curl, or static buildup.
Remove transparencies as soon as possible from the output tray to
avoid static buildup
The output tray can be pulled out to
be extended. Adjust the output tray
according to the size of paper to be
printed on.
Output Tray
Downloaded from ManualsPrinter.com Manuals
115
Media Storage
„ Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause misfeeding.
„ If media has been removed from its wrapper, place it in its original packaging and store in a cool, dark place on a level surface.
„ Avoid moisture, excessive humidity, direct sunlight, excessive heat (above
35°C [95°F]), and dust
„ Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial print and check print quality.
116
Downloaded from ManualsPrinter.com Manuals
Media Storage
Original Media
Specifications
Documents that can be placed on the original glass
The following types of documents can be placed on the original glass.
Document type
Sheets or books
Maximum document size
Legal
Maximum weight
3 kg (6.6 lb)
Observe the following precautions when placing a document on the original
glass.
„ Do not place objects weighing more than 3 kg (6.6 lb) on the original
glass; otherwise the glass may be damaged.
„ Do not press down extremely hard on a book spread on the original glass;
otherwise the original glass may be damaged.
Documents that can be loaded into the ADF
The following types of documents can be loaded into the ADF.
Document media type /
Weight
Plain paper / 50 to 128 g/m² (13 to 34 lb)
Maximum document size
Legal
Media capacity
50 sheets (media weight: 80 g/m2)
Do not load the following types of documents into the ADF.
„ Documents containing pages of different sizes
„ Wrinkled, folded, curled, or torn documents
„ Highly translucent or transparent documents, such as overhead transparencies or diazo photosensitive paper
„ Coated documents such as carbon-backed paper
„ Documents printed on paper thicker than 128 g/m² (34 lb)
„ Documents with pages bound together with paper clips or staples
„ Documents that are bound in a book or booklet
„ Documents with pages bound together with glue
Original Media
Downloaded from ManualsPrinter.com Manuals
117
„ Documents with pages that have had cutouts removed or are cutouts
„ Label sheets
„ Offset printing masters
„ Documents with binder holes
118
Downloaded from ManualsPrinter.com Manuals
Original Media
Loading a Document to be Copied
Placing a document on the original glass
1
2
Lift to open the ADF cover.
Position the document on the
original glass.
Document
"
Align the document with
the arrow on the left side
toward the rear of the
machine.
Loading a Document to be Copied
Downloaded from ManualsPrinter.com Manuals
119
3
Gently close the ADF cover.
Loading a document into the ADF
1
Put the document into the ADF
document feed tray face up.
"
"
2
Before loading a document into the ADF, check
that no document pages
remain on the original
glass.
Load the document
pages so that the top of
the document is toward
the back or the right side
of the machine.
Adjust the document guides to
the document size.
"
120
Document
For details on copying the loaded document, refer to “Using the
Copier” on page 137. For details on scanning, refer to “Using the
Scanner” on page 151.
Loading a Document to be Copied
Downloaded from ManualsPrinter.com Manuals
4Using the Printer
Driver
Downloaded from ManualsPrinter.com Manuals
Selecting Printer Options/Defaults
(for Windows)
Before you start working with your machine, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should “declare” the options in the driver.
Windows Vista/XP/Server 2003/2000 (PCL6, PS)
1
2
3
4
5
Choose the driver’s properties as follows:
–
(Windows Vista)
From the Start menu, click Control Panel, then Hardware and
Sound, and then click Printers to open the Printers directory.
Right-click the EPSON CX28 P6 or EPSON CX28 PS printer icon, and
then click Properties.
–
(Windows XP/Server 2003)
From the Start menu, choose Printers and Faxes to display the
Printers and Faxes directory. Right-click the EPSON CX28 P6 or
EPSON CX28 PS printer icon and choose Properties.
–
(Windows 2000)
From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the EPSON CX28 P6 or EPSON
CX28 PS printer icon and choose Properties.
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
Select the Configure tab.
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
Click the Refresh to automatically configure installed options.
"
6
From the Device Options list, select an option, one at a time, and then
select Enable or Disable from the Settings menu.
"
7
If Printer Memory is selected, select 256 MB, 512 MB or
768 MB according to the installed memory. The factory default setting is 256 MB.
Click Apply.
"
122
The Refresh is available only if bi-directional communication is
available with the machine; otherwise it is grayed out.
Depending on the version of the operating system, Apply may not
appear. If this is the case, continue with the next step.
Selecting Printer Options/Defaults (for Windows)
Downloaded from ManualsPrinter.com Manuals
8
9
10
11
12
13
Select the General tab.
Click Printing Preferences.
Printing Preferences dialog box appears.
Select the default settings for your machine, such as the default media
format you use, in the appropriate tabs.
Click Apply.
Click OK to exit from the Printing Preferences dialog box.
Click OK to exit from the Properties dialog box.
Selecting Printer Options/Defaults (for Windows)
Downloaded from ManualsPrinter.com Manuals
123
Uninstalling the Printer Driver
(for Windows)
This section describes how to uninstall the printer driver if necessary.
Windows Vista/XP/Server 2003/2000 (PCL6, PS)
1
2
3
4
5
6
124
Close all applications.
Choose the Uninstall Program as follows:
–
(Windows Vista/XP/Server 2003)
From the Start menu, choose All programs, SEIKO EPSON,
AL-CX28, and then Uninstall Printer Driver.
–
(Windows 2000)
From the Start menu, choose Programs, SEIKO EPSON, AL-CX28,
and then Uninstall Printer Driver.
When the Uninstall dialog box appears, select the name of the driver to be
deleted, and then click the Uninstall button.
Click Uninstall.
Click OK, and restart your computer.
The printer driver will be uninstalled from your computer.
Uninstalling the Printer Driver (for Windows)
Downloaded from ManualsPrinter.com Manuals
Displaying Printer Driver Settings
(for Windows)
Windows Vista
1
2
From the Start menu, click Control Panel, then Hardware and Sound,
and then click Printers to open the Printers directory.
Right-click the EPSON CX28 P6, or EPSON CX28 PS printer icon, and
then click Printing Preferences.
Windows XP/Server 2003
1
2
From the Start menu, choose Printers and Faxes to display the Printers
and Faxes directory.
Right-click the EPSON CX28 P6 or EPSON CX28 PS printer icon and
choose Printing Preferences.
Windows 2000
1
2
From the Start menu, point to Settings, and then click Printers to display
the Printers directory.
Right-click the EPSON CX28 P6 or EPSON CX28 PS printer icon and
choose Printing Preferences.
Displaying Printer Driver Settings (for Windows)
Downloaded from ManualsPrinter.com Manuals
125
Printer Driver Settings
Common Buttons
The buttons described below appear on each tab.
„ OK
Click to exit the Properties dialog box, saving any changes made.
„ Cancel
Click to exit the Properties dialog box without saving any changes made.
„ Apply
Click to save all changes without exiting the Properties dialog box.
„ Help
Click to view the help.
„ Favorite Setting
Click Add to save the current settings. Specify the following settings, and
then click OK.
Name: Type in the name of the settings to be saved.
Icon: Select an icon from the icon list to easily identify the settings. The
selected icon appears in the drop-down list.
Sharing: Specify whether or not the settings to be saved can be used by
other users logged onto the computer.
Comment: Add a simple comment to the settings to be saved.
Afterward, the saved settings can be selected from the drop-down list. To
change the registered settings, click Edit.
Select Defaults from the drop-down list to reset the functions in all tabs to
their default values.
„ Paper View
Click the button to display a sample of the page layout in the figure area.
"
This button does not appear on the Quality tab.
„ Printer View
Click the button to display an image of the printer in the figure area.
„ Quality View
Click the button to display a sample of the settings selected in the Quality tab.
"
This button appears only when the Quality tab is selected.
126
Downloaded from ManualsPrinter.com Manuals
Printer Driver Settings
„ Default
Click the button to reset the settings to their defaults.
"
When this button is clicked, the settings in the displayed dialog box
are reset to their defaults. The settings on other tabs are not changed.
Advanced Tab (PostScript Printer Driver Only)
The Advanced Tab allows you to
„ Select whether to enable or disable the settings for advanced printing
functions (such as booklet printing)
„ Specify the PostScript output method
„ Specify whether or not the error messages of a print job are printed
„ Print a mirror image
„ Specify whether or not the application can directly output PostScript data
Basic Tab
The Basic Tab allows you to
„ Specify the orientation of the media
„ Specify the size of the original document
„ Select the output media size
„ Register/edit custom paper sizes
„ Zoom (expand/reduce) documents
„ Specify the paper source
„ Specify the type of media
„ Specify the number of copies
„ Turn on/off job collation
„ Save a print job on the machine and print it later (Job Retention)
„ Save a confidential job on the machine and protect it with a password
„ Print a single copy for proofing
„ Specify user authentication settings
„ Print on the back side of paper that has already been printed on
"
Use paper that has been printed on with this machine.
In addition, the page printed with this setting is not guaranteed.
Printer Driver Settings
Downloaded from ManualsPrinter.com Manuals
127
"
Do not use the following types of paper.
- Paper that has been printed on with an inkjet printer
- Paper that has been printed on with a monochrome/color laser
printer/copier
- Paper that has been printed on with any other printer
Layout Tab
The Layout Tab allows you to
„ Print several pages of a document on the same page (N-up printing)
„ Print a single copy for enlargement and print several pages (PCL printer
driver only)
„ Rotate the print image 180 degrees
„ Specify whether or not blank pages are printed (PCL printer driver only)
„ Specify Double-Sided printing
„ Specify booklet printing
„ Specify the position on the paper where the document is to be printed
„ Specify image shift settings (PCL printer driver only)
„ Adjust the printing position (PCL printer driver only)
Cover Page Tab
The Cover Page Tab allows you to
„ Print front and back cover pages and separator pages
„ Specify the tray that contains the paper for the front and back cover pages
and separator pages
Watermark/Overlay Tab
"
Be sure to use overlays with print jobs with a paper size and orientation that matches the overlay form.
In addition, if settings have been specified for “N-up” or “Booklet” in
the printer driver, the overlay form cannot be adjusted to match the
specified settings.
The settings in the “Watermark” function of the Watermark/Overlay tab allows
you to
„ Select the watermark to be used
„ Create, edit or delete watermarks
„ Lighten the density of the watermark
128
Downloaded from ManualsPrinter.com Manuals
Printer Driver Settings
„ Print a frame around watermarks
„ Print transparent (shaded) watermarks
„ Print the watermark on only the first page
„ Print the watermark repeatedly throughout the all pages
The settings in the “Overlay” function of the Watermark/Overlay tab allows
you to
„ Select the form to use
„ Add or delete overlay files
„ Create a form (PCL printer driver only)
„ Specify that the document and form are printed overlapping (PCL printer
driver only)
„ Display the form information (PCL printer driver only)
„ Print the form on All Pages, First Page, Even Pages and Odd Pages
„ Place the form in back of the document or in front on the printed document (PCL printer driver only)
Quality Tab
The Quality Tab allows you to
„ Switch between color and grayscale printing
„ Control the darkness of an image (Brightness)
„ Control the tones of an image (Contrast) (PCL printer driver only)
„ Specify the color settings (Quick Color)
„ Specify the amount of details in graphic patterns (PCL printer driver only)
„ Specify the image compression method (PCL printer driver only)
„ Perform color separation
„ Select whether or not economy printing is used
„ Set the edge strength to Low, Middle or High
„ Specify the format of fonts that are to be downloaded
„ Print using the fonts
„ Font substitution settings for TrueType fonts
Printer Driver Settings
Downloaded from ManualsPrinter.com Manuals
129
Other Tab
The Other Tab allows you to
„ Select that Microsoft Excel sheets are not to be divided when printing
„ Select that the white background of Microsoft PowerPoint data does not
hide overlay files (PCL printer driver only)
„ Send a notification by e-mail when printing is finished
„ Prevent loss when printing fine lines (PCL printer driver only)
„ Shows the version information for the printer driver
Limitations on printer driver functions installed with
Point and Print
If Point and Print is performed with the following server and client combinations, there are limitations on some printer driver functions.
„ Server and client combinations
Server: Windows Vista/XP/Server2003/2000
Client: Windows Vista/XP/Server2003/2000
„ Functions with limitations applied
Booklet, Skip Blank Pages, Front Cover Page, Back Cover Page, Separator Page, Create Overlay, Print Overlay, Watermark
*JOBNAME, USERNAME, and HOSTNAME output of PJL
130
Downloaded from ManualsPrinter.com Manuals
Printer Driver Settings
5Camera Direct
Downloaded from ManualsPrinter.com Manuals
Camera Direct
If a digital camera with PictBridge (1.0 or later) is connected to the machine
through the USB HOST port, images stored on the digital camera can be
printed directly from the machine.
"
"
For details on using the digital camera, refer to your digital cameras
manual.
The following features are not supported with Camera Direct.
- DPOF AUTOPRINT image print
- Borderless
- Cable disconnect enable (printer status information)
- DPOF cable disconnect recovery
Printing Directly from a Digital Camera
1
Select DIRECT PRINT in the UTILITY menu, and then specify settings for IMAGE QUALITY, PAPER SIZE and N-UP LAYOUT.
"
"
2
4
If the settings on the digital camera have been changed, the digital
camera settings are given priority.
Connect the USB cable to the digital camera and to the USB HOST
port.
"
3
For details on the DIRECT PRINT menu, refer to “DIRECT PRINT
Menu” on page 53.
A USB cable is not
included with the machine
and must be purchased
separately, if not supplied
with your digital camera.
From the digital camera, specify
the image that you wish to print and the desired number of copies.
Start printing from the digital camera.
132
Downloaded from ManualsPrinter.com Manuals
Camera Direct
6Memory Direct
Downloaded from ManualsPrinter.com Manuals
Memory Direct
PDF, JPEG and TIFF files saved on USB memory devices can be printed by
plugging the USB memory device into the machine.
"
"
Memory direct can be used only if the optional hard disk drive is
installed.
In order to perform collated printing with memory direct, the optional
hard disk drive must be installed.
For details on specifying settings with the control panel, refer to “MEMORY PRINT Menu” on page 86.
Printing From a Connected USB Memory Device
1
Plug the USB memory device
into the USB HOST port.
2
In the main screen, press the + or , key to select MEMORY PRINT, and
then press the Select key.
3
Press the + or , key to select LIST OF FILES, and then press the
Select key.
"
4
5
When all files (PDF, JPEG and TIFF) are displayed, select Type
OF FILES, and then press the Select key.
From the file list, select the file that you wish to print, and then press the
Select key.
If the file to be printed is in a folder, select the folder, and then press the
Select key.
"
"
A maximum of 99 folders and files can be displayed.
Up to 7 folder levels can be displayed.
Specify the desired print settings.
"
For details on memory direct, refer to “MEMORY PRINT Menu” on
page 86.
134
Downloaded from ManualsPrinter.com Manuals
Memory Direct
6
Press the Start-Color key or the Start-B&W key to begin printing.
"
Do not unplug the USB memory device from the USB HOST port
during memory direct printing.
Memory Direct
Downloaded from ManualsPrinter.com Manuals
135
136
Downloaded from ManualsPrinter.com Manuals
Memory Direct
7Using the Copier
Downloaded from ManualsPrinter.com Manuals
Making Basic Copies
This section contains descriptions of the basic copy operation procedure and
the functions that are frequently used when making copies, such as specifying the zoom ratio and the copy density.
"
"
Before making copies, check that the Copy key is lit up in green.
If the key is not lit up in green, press the Copy key to enter Copy
mode.
The default paper size setting can be changed with PAPER SETUP in
the UTILITY menu. For details, refer to “PAPER SETUP Menu” on
page 31.
If, while specifying settings, no key is pressed for the length of time specified
for AUTO PANEL RESET, the entered settings are canceled and the main
screen (Copy mode) is displayed.
Basic Copy Operation
1
Position the document to be
copied.
"
2
For details on positioning
the document, refer to
“Placing a document on
the original glass” on
page 119 and “Loading a
document into the ADF”
on page 120.
Press the Copy key.
138
Downloaded from ManualsPrinter.com Manuals
Making Basic Copies
3
Specify the desired copy settings.
"
4
Using the keypad, specify the desired number of copies.
"
5
For details on specifying the copy mode and the copy density, refer
to “Specifying the Copy Quality Setting” on page 139.
For details on specifying the zoom ratio, refer to “Specifying the
Zoom Ratio” on page 140.
For details on selecting the media tray, refer to “Selecting the
Media Tray” on page 141.
For details on setting 2in1 and 4in1 copying, refer to “Setting 2in1/
4in1 Copying” on page 142.
For details on ID card copying, repeat copying or poster copying,
refer to “Setting a Copy Function” on page 143.
For details on duplex (double-sided) copying, refer to “Setting
Duplex (Double-Sided) Copying” on page 147.
For details on setting collated copying, refer to “Setting Collated
(Sort) Copying” on page 149.
If the number of copies was incorrectly entered, press the Back
key, and then specify the correct number of copies.
To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
Copying begins.
"
If the Stop/Reset key is pressed while copying, JOB CANCEL
appears. To stop copying, select YES. To continue copying, select
NO.
Specifying the Copy Quality Setting
Select the document type and copy density appropriate for the contents and
density of the document to be copied.
Selecting the Document Type
1
2
3
In the main screen (Copy mode), press the + or , key to select the current copy quality setting, and then press the Select key.
Press the + or , key to select MODE, and then press the Select key.
Press the + or , key to select MIX, TEXT, PHOTO, FINE/MIX, FINE/
TEXT or FINE/PHOTO, and then press the Select key.
The main screen (Copy mode) appears again.
Making Basic Copies
Downloaded from ManualsPrinter.com Manuals
139
Specifying the Copy Density
1
2
3
In the main screen (Copy mode), press the + or , key to select the current copy quality setting, and then press the Select key.
Press the + or , key to select DENSITY, and then press the Select key.
Press the * or ) key to select the desired copy density, and then press
the Select key.
As the indicator is moved to right, the density becomes darker.
"
If TEXT or FINE/TEXT is selected as the copy mode, select
either AUTO or MANUAL in step 3. If MANUAL is selected, specify
the copy density.
Specifying the Zoom Ratio
The zoom ratio can be specified either by selecting a preset zoom ratio or by
specifying a custom zoom ratio.
Selecting a Preset Zoom Ratio
1
2
3
In the main screen (Copy mode), press the + or , key to select the current zoom ratio setting, and then press the Select key.
Press the + or , key to select FIXED, and then press the Select key.
Press the + or , key to select the desired zoom ratio, and then press the
Select key.
"
The following zoom ratios can be selected.
In metric dimensions:
25%, 50%, 70% (A4→A5), 81% (A4→B5), 100%, 115% (B5→A4),
141% (A5→A4), 200%, 400%
In inch dimensions:
25%, 50%, 64% (LT→ST), 78% (LG→LT), 100%, 129% (ST→LT),
154% (ST→LG), 200%, 400%
The zoom ratio cannot be changed using the keypad.
Specifying a Custom Zoom Ratio
1
2
3
In the main screen (Copy mode), press the + or , key to select the current zoom ratio setting, and then press the Select key.
Press the + or , key to select MANUAL, and then press the Select key.
Use the keypad to type in the desired zoom ratio, or press the + or , key
to specify the zoom ratio, and then press the Select key.
140
Downloaded from ManualsPrinter.com Manuals
Making Basic Copies
"
Each press of the + or , key changes the zoom ratio by 1%.
A setting between 25% and 400% can be specified.
Selecting the Media Tray
"
1
2
If the optional lower feeder unit is not installed, the TRAY3 does not
appear.
In the main screen (Copy mode), press the + or , key to select the current media tray setting, and then press the Select key.
Press the + or , key to select the desired media tray, and then press the
Select key.
"
If no paper is loaded, EMPTY appears to the right of the media
type.
Making Basic Copies
Downloaded from ManualsPrinter.com Manuals
141
Making Advanced Copies
This section contains descriptions on setting 2in1/4in1 copying, ID card copying, repeat copying, poster copying, duplex (double-sided) copying and collated (Sort) copying.
"
ID card copying, repeat copying or poster copying cannot be set at the
same time that 2in1/4in1 copying, duplex (double-sided) copying or
collated (Sort) copying is set.
Setting 2in1/4in1 Copying
If 2in1 copying is set, two document pages can be copied together onto a single page. If 4in1 copying is set, four document pages can be copied together
onto a single page.
2in1/4in1 Copying From the ADF
1
2
In the main screen (Copy mode), press the + or , key to select the current page layout setting, and then press the Select key.
Press the + or , key to select 2in1 or 4in1, and then press the Select
key.
The zoom ratio is automatically set according to the specified media size.
Change the zoom ratio if necessary.
"
"
"
In order to perform duplex (double-sided) copying or collated (Sort)
copying with 2in1/4in1 copying, specify the necessary settings
before starting the copy operation. For details, refer to “Setting
Duplex (Double-Sided) Copying” on page 147 and “Setting Collated (Sort) Copying” on page 149.
2in1/4in1 copying cannot be set if the ADF is open.
If the zoom ratio is less than 50% with 2in1 copying set and envelopes selected as the media type, the zoom ratio will be set to
50%.
2in1/4in1 Copying From the Original Glass
1
2
In the main screen (Copy mode), press the + or , key to select the current page layout setting, and then press the Select key.
Press the + or , key to select 2in1 or 4in1, and then press the Select
key.
The zoom ratio is automatically set according to the specified media size.
Change the zoom ratio if necessary.
142
Downloaded from ManualsPrinter.com Manuals
Making Advanced Copies
3
Position the first page of the document on the original glass.
"
4
To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
Scanning of the document begins.
"
5
6
7
For details on positioning the document on the original glass, refer
to “Placing a document on the original glass” on page 119.
In order to perform duplex (double-sided) copying or collated (Sort)
copying with 2in1/4in1 copying, specify the necessary settings
before performing step 4. For details, refer to “Setting Duplex
(Double-Sided) Copying” on page 147 and “Setting Collated (Sort)
Copying” on page 149.
When NEXT PAGE? appears in the message window, place the second
document page on the original glass, and then press the Select key.
Repeat step 5 until all document pages have been scanned.
If 2in1 is set, printing automatically begins after two document pages
(four document pages if duplex (double-sided) copying was set) have
been scanned. If 4in1 is set, printing automatically begins after four document pages (eight document pages if duplex (double-sided) copying was
set) have been scanned.
After all document pages have been scanned, press the Start-Color key
or the Start-B&W key to begin printing the remaining pages.
Setting a Copy Function
ID card copying, repeat copying and poster copying can be set.
"
"
If a copy function other than NORMAL COPY has been set, 2in1/4in1
copying, collated (Sort) copying and duplex (double-sided) copying
cannot be set. In addition, the zoom ratio is automatically set (and
cannot be changed).
ID card copying, repeat copying and poster copying can only be performed with the original glass. Position the document pages to be
scanned so that they are aligned in the upper-left corner of the original
glass. Since the image is printed 4 mm from the top and left side,
adjust the position of the document as necessary. For details on positioning the document on the original glass, refer to “Placing a document on the original glass” on page 119.
Making Advanced Copies
Downloaded from ManualsPrinter.com Manuals
143
ID Card Copying
With ID card copying, the back and front of a document, such as a certificate,
are copied at full size on a single sheet of paper.
front side
back side
A
B
"
1
Position the document on the original glass.
"
2
3
4
The paper sizes that are available for ID card copying are A4, Letter and Legal.
For details on positioning the document on the original glass, refer
to “Placing a document on the original glass” on page 119.
In the main screen (Copy mode), press the + or , key to select the current copy function setting, and then press the Select key.
Press the + or , key to select ID CARD COPY, and then press the
Select key.
To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
Scanning of the document begins.
5
When NEXT PAGE? appears, position the back side of the document at
the same location as the front side, and then press the Select key.
After the back side has been scanned, printing automatically begins.
144
Downloaded from ManualsPrinter.com Manuals
Making Advanced Copies
"
To print only the front sides that were scanned first, press the
Start-Color key or the Start-B&W key in step 5.
Repeat Copying
With repeat copying, small documents, such as memos, are tiled and printed
on a single page.
1
Position the document on the original glass.
"
2
3
4
5
6
In the main screen (Copy mode), press the + or , key to select the current copy function setting, and then press the Select key.
Press the + or , key to select REPEAT COPY, and then press the
Select key.
When the How to Repeat Copy screen appears, check the settings, and
then press the Select key.
To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
Use the keypad to type in the document length, and then press the Select
key.
"
7
For details on positioning the document on the original glass, refer
to “Placing a document on the original glass” on page 119.
To change the document size, press the Back key to delete the
current size, and then use the keypad to specify the desired size.
Use the keypad to type in the document width, and then press the Select
key.
After the document has been scanned, printing automatically begins.
"
To change the document size, press the Back key to delete the
current size, and then use the keypad to specify the desired size.
Making Advanced Copies
Downloaded from ManualsPrinter.com Manuals
145
Poster Copying
With poster copying, the length and width of the scanned document are each
enlarged 200%, and printed on four pages.
"
1
If the scanned image does not fit on the size of paper that is used,
there may be margins on the sides of the image or the image may not
fit in the paper.
Position the document on the original glass.
"
2
3
4
For details on positioning the document on the original glass, refer
to “Placing a document on the original glass” on page 119.
In the main screen (Copy mode), press the + or , key to select the current copy function setting, and then press the Select key.
Press the + or , key to select POSTER COPY, and then press the
Select key.
To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
After the document has been scanned, printing automatically begins.
146
Downloaded from ManualsPrinter.com Manuals
Making Advanced Copies
Setting Duplex (Double-Sided) Copying
Duplex (Double-Sided) Copying From the ADF
With duplex (double-sided) copying, two single-sided document pages can be
scanned with the ADF and printed onto a single sheet of paper.
1
In the main screen (Copy mode), press the + or , key to select the current simplex/duplex (single-sided/double-sided) setting, and then press
the Select key.
2
Press the + or , key to select 1-SIDE→2-SIDE, and then press the
Select key.
3
Press the + or , key to select LONG EDGE or SHORT EDGE, and then
press the Select key.
The main screen (Copy mode) appears again.
11
When LONG EDGE or SHORT EDGE is selected, duplex (Double-Sided) copying is performed as described below.
2
"
If LONG EDGE is selected, the pages will be laid out to flip
at the sides.
13
If SHORT EDGE is selected, the pages will be laid out to flip
at the top.
11
2
13
Making Advanced Copies
Downloaded from ManualsPrinter.com Manuals
147
Duplex (Double-Sided) Copying From the Original Glass
Duplex (double-sided) copying can also be performed by placing the document on the original glass.
1
Position the document on the
original glass.
"
2
For details on positioning
the document on the original glass, refer to “Placing a document on the
original glass” on page
119.
In the main screen (Copy mode), press the + or , key to select the current simplex/duplex (single-sided/double-sided) setting, and then press
the Select key.
3
Press the + or , key to select 1-SIDE→2-SIDE, and then press the
Select key.
4
Press the + or , key to select LONG EDGE or SHORT EDGE, and then
press the Select key.
"
5
For details on LONG EDGE and SHORT EDGE, refer to “Duplex
(Double-Sided) Copying From the ADF” on page 147.
To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
Scanning of the document begins.
6
When NEXT PAGE? appears in the message window, place the second
document page on the original glass, and then press the Select key.
After the second page (back side) is scanned, printing begins automatically.
148
Downloaded from ManualsPrinter.com Manuals
Making Advanced Copies
Duplex (Double-Sided) Document Copying
A duplex (double-sided) document can be scanned and printed as either a
duplex (double-sided) copy or a simplex (single-sided) copy.
"
1
Duplex (double-sided) document copying can only be performed from
the ADF.
In the main screen (Copy mode), press the + or , key to select the current simplex/duplex (single-sided/double-sided) setting, and then press
the Select key.
2
Press the + or , key to select 2-SIDE→2-SIDE for a duplex (double-sided) copy or 2-SIDE→1-SIDE for a simplex (single-sided) copy,
and then press the Select key.
3
Press the + or , key to select LONG EDGE or SHORT EDGE as the
binding position in the document to be scanned, and then press the
Select key.
4
If 2-SIDE→2-SIDE was selected in step 2, select LONG EDGE or
SHORT EDGE as the binding position of the duplex (double-sided) copy,
and then press the Select key.
Setting Collated (Sort) Copying
With collated (Sort) copying, multiple copies of multi-page documents can be
printed in order and sorted by copy set.
Collated (Sort) Copying From the ADF
1
2
In the main screen (Copy mode), press the + or , key to select the current Sort setting, and then press the Select key.
Press the + or , key to select SORT, and then press the Select key.
The main screen (Copy mode) appears again.
Collated (Sort) Copying From the Original Glass
1
Position the document on the original glass.
"
2
3
For details on positioning the document on the original glass, refer
to “Placing a document on the original glass” on page 119.
In the main screen (Copy mode), press the + or , key to select the current Sort setting, and then press the Select key.
Press the + or , key to select SORT, and then press the Select key.
Making Advanced Copies
Downloaded from ManualsPrinter.com Manuals
149
4
5
6
7
To print color copies, press the Start-Color key. To print monochrome
copies, press the Start-B&W key.
When NEXT PAGE? appears in the message window, place the second
document page on the original glass, and then press the Select key.
Repeat step 5 until all document pages have been scanned.
After all document pages have been scanned, specify the desired number
of copies using the keypad, and then press the Start-Color key or the
Start-B&W key to begin printing.
150
Downloaded from ManualsPrinter.com Manuals
Making Advanced Copies
8Using the Scanner
Downloaded from ManualsPrinter.com Manuals
Scanning From a Computer Application
Documents can be scanned from a computer connected to this machine with
a USB cable or via a network. Scanning settings can be specified and the
scanning operation can be performed from TWAIN- or WIA-compatible applications. From the scanner driver, a preview can be displayed and various
adjustments, such as the size of the scan area, can be specified.
"
For details on the installation of the scanner driver or network TWAIN
settings, refer to the Setup Guide on the software CD-ROM.
Basic Scanning Operation
1
Position the document to be
scanned.
"
2
3
4
5
152
For details on positioning
the document, refer to
“Placing a document on
the original glass” on
page 119 and “Loading a
document into the ADF”
on page 120.
Start the application to be used for scanning.
Start the scanner driver according to the application settings.
Specify the necessary scanner driver settings.
Click the Scan button in the scanner driver.
Scanning From a Computer Application
Downloaded from ManualsPrinter.com Manuals
Windows TWAIN Driver Settings
„ Load
Specify a saved settings file (dat file) for scanning.
„ Save
Save the current settings as a settings file (dat file).
„ Default
Return all settings to their defaults.
„ Help icon
Click to display the Help.
„ About icon
Click to display the software version information.
„ ADF
With scanning documents from the ADF, select whether to scan only the front
side or both sides of the document.
„ Original Size
Specify the original size.
„ Scan Type
Specify the scan type.
„ Resolution
Specify the resolution.
„ Scale
Specify the enlargement or reduction ratio for the selected area.
"
If the resolution is set at 1200 × 1200dpi or higher, a setting larger
than 100% cannot be specified.
„ Scanning mode
Select Auto or Manual. When Manual is selected, a tab appears so that
detailed settings can be specified, for example, for Brightness/Contrast and
Filter.
"
"
The parameters that can be set differ depending on the scanning
mode that is selected.
If Auto is selected as the scanning mode, scanning from the original
glass is performed after a prescan is performed so that a preview
image can be checked.
Scanning From a Computer Application
Downloaded from ManualsPrinter.com Manuals
153
„ Image size
Shows the data size of the scan image.
„ Rotation
Select the orientation of the image to be scanned.
"
If the Rotate back side check box is selected, the back side of the
image is rotated 180° and scanned. (Applies only if ADF (Duplex) is
selected)
„ Close
Click to close the TWAIN driver window.
„ Prescan
Click to begin scanning a preview image.
„ Scan
Click to begin scanning.
„ AutoCrop icon
Click to automatically detect the scanning position based on the preview
image.
„ Zoom icon
Click to rescan the area selected in the preview window and enlarge it to fit
the window.
„ Mirror icon
Click to display a mirror image of the preview image.
„ Tone Reversal icon
Click to reverse the colors of the preview image.
„ Clear icon
Click to erase the preview image.
„ Preview window
Displays a preview image. Drag the rectangle over the image to select an
area.
„ Before/After (RGB)
Move the pointer in the preview window to display the color tones at the
pointer's position before and after adjustments.
„ Width/Height
Displays the width and height for the selected area in the selected measurement units.
154
Scanning From a Computer Application
Downloaded from ManualsPrinter.com Manuals
Windows WIA Driver Settings
„ Paper source
Select the paper source.
„ Color picture
Select this setting when scanning in color.
„ Grayscale picture
Select this setting when scanning in grayscale.
„ Black and white picture or text
Select this setting when scanning in black and white.
„ Custom Settings
Select this setting when scanning with Adjust the quality of the scanned
picture settings applied.
"
If settings have been specified with Adjust the quality of the
scanned picture, Custom Settings is automatically selected.
„ Adjust the quality of the scanned picture
Click this message to display the Advanced Properties dialog box. In the
Advanced Properties dialog box, settings can be specified for Brightness,
Contrast, Resolution, and Picture type (select from color, grayscale or
black and white).
"
These settings are applied when Custom Settings is selected.
„ Page size
Specify the paper size when Page source is set to Document Feeder.
„ Preview window
Displays a preview image. Drag the rectangle over the image to select an
area.
„ Preview
Click to begin scanning a preview image.
„ Scan
Click to begin scanning.
„ Cancel
Click to close the WIA driver window.
Scanning From a Computer Application
Downloaded from ManualsPrinter.com Manuals
155
Macintosh TWAIN Driver Settings
„ Load
Specify a saved settings file (dat file) for scanning.
„ Save
Save the current settings as a settings file (dat file).
„ Default
Return all settings to their defaults.
„ Help icon
Click to display the Help.
„ About icon
Click to display the software version information.
„ ADF
With scanning documents from the ADF, select whether to scan only the front
side or both sides of the document.
„ Original Size
Specify the original size.
„ Scan Type
Specify the scan type.
„ Resolution
Specify the resolution.
„ Scale
Specify the enlargement or reduction ratio for the selected area.
"
If the resolution is set at 1200 × 1200dpi or higher, a setting larger
than 100% cannot be specified.
„ Scanning mode
Select Auto or Manual. When Manual is selected, a tab appears so that
detailed settings can be specified, for example, for Brightness/Contrast and
Filter.
"
"
156
The parameters that can be set differ depending on the scanning
mode that is selected.
If Auto is selected as the scanning mode, scanning from the original
glass is performed after a prescan is performed so that a preview
image can be checked.
Scanning From a Computer Application
Downloaded from ManualsPrinter.com Manuals
„ Image size
Shows the data size of the scan image.
„ Rotation
Select the orientation of the image to be scanned.
"
If the Rotate back side check box is selected, the back side of the
image is rotated 180° and scanned. (Applies only if ADF (Duplex) is
selected)
„ Close
Click to close the TWAIN driver window.
„ Prescan
Click to begin scanning a preview image.
„ Scan
Click to begin scanning.
„ AutoCrop icon
Click to automatically detect the scanning position based on the preview
image.
„ Zoom icon
Click to rescan the area selected in the preview window and enlarge it to fit
the window.
„ Mirror icon
Click to display a mirror image of the preview image.
„ Tone Reversal icon
Click to reverse the colors of the preview image.
„ Clear icon
Click to erase the preview image.
„ Preview window
Displays a preview image. Drag the rectangle over the image to select an
area.
„ Before/After (RGB)
Move the pointer in the preview window to display the color tones at the
pointer's position before and after adjustments.
„ Width/Height
Displays the width and height for the selected area in the selected measurement units.
Scanning From a Computer Application
Downloaded from ManualsPrinter.com Manuals
157
Scanning With the Machine
The machine keys can be used to make scans. This operation differs from
scanning from a computer application since the destination of the scan data
can also be specified.
"
"
Before scanning, check that the Scan key is lit up in green. If the key
is not lit up in green, press the Scan key to enter Scan mode.
If, while specifying settings, no key is pressed for the length of time
specified for AUTO PANEL RESET, the entered settings are canceled and the main screen (Scan mode) is displayed.
Basic Scanning Operation
1
Position the document to be
scanned.
"
2
For details on positioning
the document, refer to
“Placing a document on
the original glass” on
page 119 and “Loading a
document into the ADF”
on page 120.
Press the Scan key to enter Scan mode.
158
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
3
Specify the desired scan settings.
"
4
5
6
7
For details on specifying the destination of the data, refer to “Specifying the Data Location” on page 159 and “Specifying the Destination Address (Scan to E-mail/FTP/SMB)” on page 161.
For details on selecting the data format, refer to “Selecting the
Data Format” on page 176.
For details on selecting the scan quality setting, refer to “Selecting
the Scan Quality Setting” on page 176.
For details on setting duplex (double-sided) scanning, refer to
“Setting Duplex (Double-Sided) Scanning” on page 177.
For details on setting the scan size, refer to “Setting the Scan Size”
on page 178.
For details on setting the color of the scan data, refer to “Setting
the Scan Color” on page 178.
For details on specifying the subject when sending data, refer to
“Specifying the Subject” on page 178.
To scan color scans, press the Start-Color key. To scan monochrome
scans, press the Start-B&W key.
If the document was loaded in the ADF, scanning begins, and then the
data is sent to the specified location. If the document was placed on the
original glass, continue with step 5.
When NEXT PAGE? appears in the message window, place the second
document page on the original glass, and then press the Select key.
Press the + or , key to select the size of the document positioned in step
5, and then press the Select key.
After all document pages have been scanned, press the Start key.
The scanned document is sent to the specified location.
"
"
If the Stop/Reset key is pressed while scanning, JOB CANCEL
appears. To continue scanning, select NO. To stop scanning,
select YES.
To cancel a job where scanning was finished and the data is
queued to be sent, refer to “Deleting a Queued Transmission Job”
on page 178.
Specifying the Data Location
Select whether the computer or USB memory device is the location where
scan data is to be saved. When transmitting via a network, refer to “Specifying the Destination Address (Scan to E-mail/FTP/SMB)” on page 161.
"
If an address has been specified as the destination for the data, SCAN
TO USB MEMORY cannot be selected.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
159
Saving Data on a USB Memory Device (Scan to USB
Memory)
Follow the procedure described below to save scan data to a USB memory
device plugged into the USB HOST port of this machine.
"
1
2
3
This machine is compatible with a USB memory device of 4 GB or
less.
Plug the USB memory device into the USB HOST port of this machine.
In the main screen (Scan mode), press the + or , key to select “SCAN
TO”, and then press the Select key.
Press the + or , key to select SCAN TO USB MEMORY, and then press
the Select key.
"
Depending on the USB memory device that is used, it may take some
time for the scan data to be transferred.
160
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
Specifying the Destination Address (Scan to E-mail/FTP/
SMB)
Scan data can be sent via the network to a specified address (e-mail address,
FTP address or SMB address). The address can be typed in directly, or an
address registered on the machine can be selected.
"
"
"
To send scan data via the network, settings for NETWORK SETTING
and E-MAIL SETTING (when sending to an e-mail address) must
be specified.
If the size of the scan data sent by e-mail exceeds the size specified
with FILE SIZE, the data is automatically divided into multiple
e-mail messages. For details, refer to “SCAN SETTING Menu” on
page 51.
To save scan data in a shared folder on a computer installed with Windows or on the FTP server, the FTP address or SMB address must be
registered as an address destination. These addresses can be registered only from Web-based EpsonNet config. For details, refer to the
Reference Guide on the software CD-ROM.
Directly Entering the E-mail Address
The destination address (e-mail address) where the scan data is to be sent
can be directly typed in.
"
1
A maximum of 16 addresses (total of e-mail addresses from direct
input and an LDAP search) can be specified.
In the main screen (Scan mode), use the keypad to type in the destination
address.
"
2
3
For details on entering/editing text, refer to “Entering Text” on page
283.
After the text is entered, press the Select key.
If an e-mail address was selected, press the + or , key to select FINISH, and then press the Select key.
"
To add an additional e-mail address, select ADD in step 3, and
then specify the destination.
To edit the specified e-mail address, select CHECK/EDIT in step
3, and then continue with step 2 of “Editing a Specified Destination
Address”. To delete an address, select CHECK/EDIT in step 3,
and then continue with step 2 of “Deleting a Specified Destination
Address”.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
161
Selecting From the Favorite List
From the address destinations and group destinations registered on this
machine, register a maximum of 20 destinations in the favorite list for convenient access to frequently specified destinations. Follow the procedure
described below to specify an address (e-mail address, FTP address or SMB
address) from the favorite list as the recipient of the scan data.
"
1
2
3
4
For details on registering addresses in the favorite list, refer to “Registering in the Favorite List” on page 169.
With the main screen (Scan mode) or Can Use AddressBook displayed, press the AddressBook key so that FAVORITE appears.
Press the + or , key to select the desired data, and then press the Select
key.
Press the Select key again.
If an FTP address or an SMB address was selected, the destination
address is specified.
If an e-mail address was selected, press the + or , key to select FINISH, and then press the Select key.
"
To add an additional e-mail address, select ADD in step 4, and
then specify the destination. When sending the data to an FTP
address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select CHECK/EDIT in
step 4. To delete an address, select CHECK/EDIT in step 4, and
then continue with step 2 of “Deleting a Specified Destination
Address”.
Selecting an Address Destination
A maximum of 250 address destinations can be registered on this machine.
Follow the procedure described below to specify an address (e-mail, FTP or
SMB address) from the registered address destinations as the recipient of the
scan data.
"
1
2
For details on registering addresses as address destinations, refer to
“Registering Address Destinations (Direct Input)” on page 170 or
“Registering Address Destinations (LDAP Search)” on page 171.
With the main screen (Scan mode) or Can Use AddressBook displayed, press the AddressBook key twice so that ADDRESS appears.
Use the keypad to type in the number (between 1 and 250) for the
address destination, and then press the Select key.
The information registered for the address destination appears for two
seconds.
162
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
3
4
Press the Select key again.
If an FTP address or an SMB address was selected, the destination
address is specified.
If an e-mail address was selected, press the + or , key to select FINISH, and then press the Select key.
"
To add an additional e-mail address, select ADD in step 4, and
then specify the destination. When sending the data to an FTP
address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select CHECK/EDIT in
step 4. To delete an address, select CHECK/EDIT in step 4, and
then continue with step 2 of “Deleting a Specified Destination
Address”.
Selecting a Group Destination
A maximum of 20 group destinations can be registered on this machine. (A
maximum of 50 e-mail addresses can be registered with one group.) Follow
the procedure described below to specify e-mail addresses from the registered group destinations as the recipient of the scan data.
"
1
2
3
4
For details on registering e-mail addresses as group destinations,
refer to “Registering Group Destinations” on page 174.
With the main screen (Scan mode) or Can Use AddressBook displayed, press the AddressBook key three times so that Group appears.
Use the keypad to type in the number (between 1 and 20) for the group
destination, and then press the Select key.
The information registered for the group destination appears for two seconds.
Press the Select key again.
Press the + or , key to select FINISH, and then press the Select key.
"
To add an additional e-mail address, select ADD in step 4, and
then specify the destination.
To check the specified e-mail address, select CHECK/EDIT in
step 4. To delete an address, select CHECK/EDIT in step 4, and
then continue with step 2 of “Deleting a Specified Destination
Address”.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
163
Selecting From the Address Book
The address destinations and group destinations registered on this machine
are saved in the address book. Follow the procedure described below to
specify an address (e-mail address, FTP address or SMB address) from the
address book as the recipient of the scan data.
"
This feature is available only if data has been registered in the
address book.
1
With the main screen or Can Use AddressBook displayed, press the
AddressBook key four times so that ADDRESS BOOK appears.
2
Press the + or , key to select LIST, and then press the Select key.
A list of the address book contents appears.
3
4
5
Press the + or , key to select the desired data, and then press the Select
key.
Press the Select key again.
If an FTP address or an SMB address was selected, the destination
address is specified.
If an e-mail address was selected, press the + or , key to select FINISH, and then press the Select key.
"
To add an additional e-mail address, select ADD in step 5, and
then specify the destination. When sending the data to an FTP
address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select CHECK/EDIT in
step 5. To delete an address, select CHECK/EDIT in step 5, and
then continue with step 2 of “Deleting a Specified Destination
Address”.
Searching the Address Book
The destination address (e-mail address, FTP address or SMB address)
where the scan data is to be sent can be specified by searching the address
book.
"
This feature is available only if data has been registered in the
address book.
1
With the main screen (Scan mode) or Can Use AddressBook displayed, press the AddressBook key four times so that ADDRESS BOOK
appears.
2
Press the + or , key to select SEARCH, and then press the Select key.
164
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
3
Use the keypad to type in the search keyword (maximum of 10 characters), and then press the Select key.
The search begins, and the search results appear after a while. If no data
matches the search keyword, NOT FOUND appears for about two seconds.
"
"
4
6
Text starting with the first character of the maximum 10 characters
is searched for. Text will not be found if the search keyword is in
the middle of a word.
Press the + or , key to select the desired data, and then press the Select
key.
"
5
For details on entering/editing text, refer to “Entering Text” on page
283.
To narrow down the search results, press the Back key, and then
perform step 3 again.
Press the Select key again.
If an FTP address or an SMB address was selected, the destination
address is specified.
If an e-mail address was selected, press the + or , key to select FINISH, and then press the Select key.
"
To add an additional e-mail address, select ADD in step 6, and
then specify the destination. When sending the data to an FTP
address or SMB address, multiple addresses cannot be specified.
To check the specified e-mail address, select CHECK/EDIT in
step 6. To delete an address, select CHECK/EDIT in step 6, and
then continue with step 2 of “Deleting a Specified Destination
Address”.
Searching an LDAP Server
The destination e-mail address where the scan data is to be sent can be
specified by using information on the LDAP server.
"
"
"
To connect to an LDAP server, settings for LDAP SETTING must be
specified. For details, refer to the Reference Guide on the software
CD-ROM.
A maximum of 16 addresses (total of addresses from direct input and
an LDAP search) can be specified.
If anonymous access is used to search for information on an LDAP
server, the correct search results may not be retrieved.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
165
1
With the main screen (Scan mode) or Can Use AddressBook displayed, press the AddressBook key four times so that ADDRESS BOOK
appears.
2
Press the + or , key to select LDAP SEARCH, and then press the
Select key.
3
Press the + or , key to select NAME or E-MAIL, and then press the
Select key.
"
4
Use the keypad to type in the search keyword (maximum of 10 characters), and then press the Select key.
The search begins, and the search results appear after a while. If no data
matches the search keyword, NOT FOUND appears for about two seconds.
"
"
5
For details on entering/editing text, refer to “Entering Text” on page
283.
Text starting with the first character of the maximum 10 characters
is searched for. Text will not be found if the search keyword is in
the middle of a word.
Press the + or , key to select the desired data, and then press the Select
key.
"
"
"
6
7
To search registered names, select NAME. To search e-mail
addresses, select E-MAIL.
To check the found information, press the ) key.
An e-mail address exceeding 64 characters cannot be specified. If
such an e-mail address is specified, ADDRESS IS TOO LONG
appears for about two seconds, and then the screen for specifying
the destination address appears.
To narrow down the search results, press the Back key, and then
perform step 4 again.
Press the Select key again.
Press the + or , key to select FINISH, and then press the Select key.
"
To add an additional e-mail address, select ADD in step 7, and
then specify the destination. To edit the specified e-mail address,
select CHECK/EDIT in step 7, and then continue with step 2 of
“Editing a Specified Destination Address”. To delete a specified
e-mail address, select CHECK/EDIT in step 7, and then continue
with step 2 of “Deleting a Specified Destination Address”. The
address cannot be edited.
166
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
Specifying Multiple Destination Addresses
A destination address can be added if a destination e-mail address is specified.
"
1
2
3
If an FTP address or an SMB address was selected, multiple destination addresses cannot be specified.
In the main screen (Scan mode), press the + or , key to select the current data destination setting, and then press the Select key.
Press the + or , key to select ADD, and then press the Select key.
Specify the destination address.
"
For details on typing in an e-mail address, refer to “Directly Entering the E-mail Address” on page 161.
For details on selecting from the favorite list, refer to “Selecting
From the Favorite List” on page 162.
For details on selecting an address destination, refer to “Selecting
an Address Destination” on page 162.
For details on selecting a group destination, refer to “Selecting a
Group Destination” on page 163.
For details on selecting from the address book, refer to “Selecting
From the Address Book” on page 164.
For details on searching the address book, refer to “Searching the
Address Book” on page 164.
For details on searching an LDAP server, refer to “Searching an
LDAP Server” on page 165.
Editing a Specified Destination Address
A specified destination e-mail address can be edited.
"
1
2
3
4
FTP addresses, SMB addresses and addresses registered as address
destinations or group destinations cannot be edited.
In the main screen (Scan mode), press the + or , key to select the current data destination setting, and then press the Select key.
Press the + or , key to select CHECK/EDIT, and then press the Select
key.
Press the + or , key to select the e-mail address to be edited, and then
press the Select key.
Use the keypad to edit the e-mail address, and then press the Select key.
"
5
For details on entering/editing text, refer to “Entering Text” on page
283.
To finish editing addresses, press the Back key.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
167
6
Press the + or , key to select FINISH, and then press the Select key.
Deleting a Specified Destination Address
A specified destination address (e-mail address, FTP address or SMB
address) can be deleted.
"
1
2
Changes made with this procedure will not be applied to the original
data (address destination, group destination, etc.).
In the main screen (Scan mode), press the + or , key to select the current data destination setting, and then press the Select key.
To delete an e-mail address, press the + or , key to select CHECK/
EDIT, and then press the Select key. Then, press the + or , key to
select the address to be deleted. To delete an FTP address or SMB
address, continue with step 3.
3
4
Press the Stop/Reset key.
Press the + or , key to select YES, and then press the Select key.
The selected address is deleted.
"
5
6
7
If all specified addresses are deleted, the main screen is displayed.
To delete another address, repeat the procedure from step 2.
To finish deleting addresses, press the Back key.
Press the + or , key to select FINISH, and then press the Select key.
Registering/Editing Addresses
Addresses can be registered/edited in the favorite list, as address destinations or as group destinations.
"
Addresses can also be registered/edited with Web-based EpsonNet
config. For details, refer to the Reference Guide on the software
CD-ROM.
168
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
Registering in the Favorite List
From the address destinations and group destinations registered on this
machine, register a maximum of 20 destinations in the favorite list for convenient access to frequently specified destinations. Follow the procedure
described below to register an address (e-mail address, FTP address or SMB
address) on the favorite list.
1
In the main screen (Scan mode), press the + or , key to select UTIL-
ITY, and then press the Select key.
2
Press the + or , key to select ADDRESS REGISTER, and then press
the Select key.
3
Press the + or , key to select FAVORITE, and then press the Select
key.
"
4
5
6
7
8
If data is already registered on the favorite list, continue with step 7
after completing step 3.
Press the AddressBook key to switch between ADDRESS and GROUP.
Use the keypad to type in the number (between 1 and 250) for the
address destination or the number (between 1 and 20) for the group destination to be registered on the favorite list, and then press the Select key.
The information registered for the selected address destination or group
destination appears.
Press the Select key again.
To register another address, press the + or , key to select ADD, press
the Select key, and then repeat the procedure from step 4.
To finish registering addresses, press the + or , key to select FINISH,
and then press the Select key.
Deleting From the Favorite List
Registered information can be deleted from the favorite list.
"
1
Changes made with this procedure will not be applied to the original
data (address destination, group destination, etc.).
In the main screen (Scan mode), press the + or , key to select UTIL-
ITY, and then press the Select key.
2
Press the + or , key to select ADDRESS REGISTER, and then press
the Select key.
3
Press the + or , key to select FAVORITE, and then press the Select
key.
4
Press the + or , key to select CHECK/EDIT, and then press the Select
key.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
169
5
6
7
8
9
Press the + or , key to select the address to be deleted from the favorite
list, and then press the Stop/Reset key.
Press the + or , key to select YES, and then press the Select key.
The selected address is deleted.
To delete another address, repeat the procedure from step 5.
To finish deleting addresses, press the Back key.
Press the + or , key to select FINISH, and then press the Select key.
Registering Address Destinations (Direct Input)
E-mail addresses can be registered as address destinations. A maximum of
250 address destinations can be registered.
"
"
1
Machine key operations cannot be used to register an FTP address or
SMB address as an address destination. These addresses can be
registered with Web-based EpsonNet config. For details, refer to the
Reference Guide on the software CD-ROM.
Address destination numbers 221 to 250 are reserved for registering
FTP addresses and SMB address from Web-based EpsonNet config.
In the main screen (Scan mode), press the + or , key to select UTIL-
ITY, and then press the Select key.
2
Press the + or , key to select ADDRESS REGISTER, and then press
the Select key.
3
4
Press the + or , key to select ADDRESS, and then press the Select key.
5
Press the + or , key to select MANUAL SETTING, and then press the
Select key.
6
Use the keypad to type in the number (between 1 and 220) for the
address destination, and then press the Select key.
"
Use the keypad to type in the registration name, and then press the
Select key.
"
7
If an LDAP server is not specified, step 5 is skipped.
"
For details on entering/editing text, refer to “Entering Text” on page
283.
A maximum of 20 characters can be entered.
Use the keypad to type in the e-mail address, and then press the Select
key.
The settings are registered, and the ADDRESS REGISTER menu
appears again.
170
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
"
A maximum of 64 characters can be entered.
Registering Address Destinations (LDAP Search)
E-mail addresses can be registered as address destinations by using information on the LDAP server. A maximum of 250 address destinations can be
registered.
"
"
"
1
To connect to an LDAP server, settings for LDAP SETTING must be
specified. For details, refer to the Reference Guide on the software
CD-ROM.
Machine key operations cannot be used to register an FTP address or
SMB address as an address destination. These addresses can be
registered with Web-based EpsonNet config. For details, refer to the
Reference Guide on the software CD-ROM.
Address destination numbers 221 to 250 are reserved for registering
FTP addresses and SMB address from Web-based EpsonNet config.
In the main screen (Scan mode), press the + or , key to select UTIL-
ITY, and then press the Select key.
2
Press the + or , key to select ADDRESS REGISTER, and then press
the Select key.
3
4
Press the + or , key to select ADDRESS, and then press the Select key.
5
Press the + or , key to select LDAP SEARCH, and then press the
Select key.
Use the keypad to type in the number (between 1 and 220) for the
address destination, and then press the Select key.
"
6
Press the + or , key to select NAME or E-MAIL, and then press the
Select key.
"
7
If an LDAP server is not specified, LDAP SEARCH does not
appear.
To search registered names, select NAME. To search e-mail
addresses, select E-MAIL.
Use the keypad to type in the search keyword (maximum of 10 characters), and then press the Select key.
The search begins, and the search results appear after a while. If no data
matches the search keyword, NOT FOUND appears for about two seconds.
"
For details on entering/editing text, refer to “Entering Text” on page
283.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
171
"
8
Press the + or , key to select the desired data, and then press the Select
key.
"
"
"
9
10
Text starting with the first character of the maximum 10 characters
is searched for. Text will not be found if the search keyword is in
the middle of a word.
To check the found information, press the ) key.
An e-mail address exceeding 64 characters cannot be specified. If
such an e-mail address is specified, ADDRESS IS TOO LONG
appears for about two seconds, and then the screen for specifying
the destination address appears.
To narrow down the search results, press the Back key, and then
perform step 7 again.
If desired, edit the registration name, and then press the Select key.
If desired, edit the e-mail address, and then press the Select key.
The settings are registered, and the ADDRESS REGISTER menu
appears again.
172
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
Editing/Deleting Address Destinations
Information registered as an address destination can be edited or deleted.
"
1
Machine key operations cannot be used to edit/delete an FTP address
or SMB address registered as an address destination. These
addresses can be edited/deleted with Web-based EpsonNet config.
For details, refer to the Reference Guide on the software CD-ROM.
In the main screen (Scan mode), press the + or , key to select UTIL-
ITY, and then press the Select key.
2
Press the + or , key to select ADDRESS REGISTER, and then press
the Select key.
3
4
Press the + or , key to select ADDRESS, and then press the Select key.
5
Press the + or , key to select EDIT to edit information or DELETE to
delete the destination, and then press the Select key.
If DELETE was selected, the settings are deleted, and the ADDRESS
REGISTER menu appears again.
6
Use the keypad to type in the number (between 1 and 220) for the
address destination to be edited/deleted, and then press the Select key.
The information currently registered for the address destination appears
for two seconds.
Use the keypad to edit the registration name, and then press the Select
key.
"
7
For details on entering/editing text, refer to “Entering Text” on page
283.
Use the keypad to edit the e-mail address, and then press the Select key.
The edited settings are saved, and the ADDRESS REGISTER menu
appears again.
"
If the edited address destination is registered in the favorite list or
with a group destination, a confirmation message asking whether
or not to keep the destination registered as it is appears after the
operation in step 7 is performed. To keep the destination registered as it is, select Yes. To cancel the registration, select No.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
173
Registering Group Destinations
An e-mail address can be registered with a group destination. A maximum of
20 group destinations can be registered. (A maximum of 50 e-mail addresses
can be registered with one group.)
"
1
The addresses that can be registered as group destinations are limited to addresses registered as address destinations or as other group
destinations.
In the main screen (Scan mode), press the + or , key to select UTIL-
ITY, and then press the Select key.
2
Press the + or , key to select ADDRESS REGISTER, and then press
the Select key.
3
4
Press the + or , key to select GROUP, and then press the Select key.
5
Use the keypad to type in the number (between 1 and 20) for the group
destination, and then press the Select key.
Use the keypad to type in the group name, and then press the Select key.
"
6
7
8
9
For details on entering/editing text, refer to “Entering Text” on page
283.
Use the keypad to type in the number (between 1 and 220) for the
address destination to be added to the group, and then press the Select
key.
The information registered for the selected address destination appears.
Press the Select key again.
To register another address destination, press the + or , key to select
ADD, press the Select key, and then repeat the procedure from step 6.
To finish registering address destinations, press the + or , key to select
FINISH, and then press the Select key.
174
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
Editing/Deleting Group Destinations
Information registered with a group destination can be edited or deleted.
1
In the main screen (Scan mode), press the + or , key to select UTIL-
ITY, and then press the Select key.
2
Press the + or , key to select ADDRESS REGISTER, and then press
the Select key.
3
4
Press the + or , key to select GROUP, and then press the Select key.
5
Press the + or , key to select EDIT to edit information or DELETE to
delete the destination, and then press the Select key.
If DELETE was selected, the settings are deleted, and the ADDRESS
REGISTER menu appears again.
6
Use the keypad to type in the number (between 1 and 20) for the group
destination to be edited/deleted, and then press the Select key.
The information currently registered for the group destination appears for
about two seconds.
If desired, edit the group name, and then press the Select key.
"
7
8
Press the + or , key to select ADD to add an address destination,
CHECK/EDIT to delete the destination or FINISH to finish editing, and
then press the Select key.
If FINISH was selected, the edited settings are saved, and the
ADDRESS REGISTER menu appears again. If ADD was selected, continue with step 6 of “Registering Group Destinations” on page 174. If
CHECK/EDIT was selected, continue with step 8.
Press the + or , key to select the address destination to be deleted, and
then press the Stop/Reset key.
"
9
10
11
For details on entering/editing text, refer to “Entering Text” on page
283.
To check the settings for the selected address destination, press
the Select key.
Press the + or , key to select Yes, and then press the Select key.
After the address destination is deleted, press the Back key.
To delete another address destination, repeat the procedure from step 8.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
175
12
To finish deleting address destinations, press the + or , key to select
FINISH, and then press the Select key.
"
If the edited group destination is registered in the favorite list, a confirmation message asking whether or not to keep the destination registered as it is appears after the operation in step 12 is performed. To
keep the destination registered as it is, select Yes. To cancel the registration, select No.
Selecting the Data Format
The data format for the scanned image can be selected.
1
2
In the main screen (Scan mode), press the + or , key to select the current data format setting, and then press the Select key.
Press the + or , key to select TIFF, PDF or JPEG, and then press the
Select key.
The main screen (Scan mode) appears again.
"
"
"
If SIMPLEX/DUPLEX is set to 2-SIDE, only PDF appears. In
addition, if BW ONLY was selected for the color setting, JPEG
does not appear.
PDF data can be opened in Adobe Acrobat Reader.
TIFF files of images that have been scanned with the Color or
Gray setting cannot be opened with the Windows Picture and
FAX Viewer, which is included with Windows XP as a standard
component. These files can be opened with image-processing
applications such as PhotoShop, Microsoft Office Document Imaging or ACDsee.
Selecting the Scan Quality Setting
The resolution, scan mode and density appropriate for the scanned image
can be selected.
Selecting the Resolution
1
In the main screen (Scan mode), press the + or , key to select the current scan quality setting, and then press the Select key.
2
Press the + or , key to select RESOLUTION, and then press the Select
key.
3
Press the + or , key to select 150x150dpi, 300x300dpi or
600x600dpi, and then press the Select key.
The main screen (Scan mode) appears again.
176
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
"
If Color or GRAY was selected for the scan color, the
resolution is automatically changed to 300×300dpi when
scanning, even if 600×600dpi was selected.
Selecting the Scan Mode
1
2
3
In the main screen (Scan mode), press the + or , key to select the current scan quality setting, and then press the Select key.
Press the + or , key to select MODE, and then press the Select key.
Press the + or , key to select MIX, TEXT or PHOTO, and then press the
Select key.
The main screen (Scan mode) appears again.
Selecting the Scan Density
1
2
3
In the main screen (Scan mode), press the + or , key to select the current scan quality setting, and then press the Select key.
Press the + or , key to select DENSITY, and then press the Select key.
Press the * or ) key to select the desired scan density, and then press
the Select key.
As the indicator is moved to right, the density becomes darker.
Setting Duplex (Double-Sided) Scanning
Double-sided document pages can be scanned with the ADF.
"
"
1
2
3
These settings are available only if the document is loaded in the ADF.
If the document is scanned without being loaded in the ADF, 1-SIDE
is automatically selected, and the document is scanned from the original glass.
This setting is available only if PDF is selected as the data format for
the scan image.
In the main screen (Scan mode), press the + or , key to select the current simplex/duplex (single-sided/double-sided) setting, and then press
the Select key.
Press the + or , key to select 2-SIDE, and then press the Select key.
Press the + or , key to select LONG EDGE or SHORT EDGE, and then
press the Select key.
The main screen (Scan mode) appears again.
"
For details on LONG EDGE and SHORT EDGE, refer to “Duplex
(Double-Sided) Copying From the ADF” on page 147.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
177
Setting the Scan Size
The size of the scan data can be specified.
"
1
2
The default setting is A4.
In the main screen (Scan mode), press the + or , key to select the current scan size setting, and then press the Select key.
Press the + or , key to select the desired size, and then press the Select
key.
The main screen (Scan mode) appears again.
Setting the Scan Color
The color of the scan data can be specified.
1
2
In the main screen (Scan mode), press the + or , key to select the current scan color setting, and then press the Select key.
Press the + or , key to select BW Only or COLOR or GRAY, and then
press the Select key.
The main screen (Scan mode) appears again.
"
"
If JPEG is selected as the data format, the scan color is set to BW
Only, and the data format is automatically set to PDF.
Settings for SCAN SETTING/CODING METHOD in the UTILITY menu are available only if BW Only is selected.
Specifying the Subject
Specify the subject used when sending scan data as e-mail.
1
2
In the main screen (Scan mode), press the + or , key to select SUB-
JECT, and then press the Select key.
Use the keypad to type in the subject name, and then press the Select
key.
The main screen (Scan mode) appears again.
"
"
For details on entering/editing text, refer to “Entering Text” on page
283.
To erase the specified subject name, press the Back key.
Deleting a Queued Transmission Job
The list of jobs queued for transmission can be displayed, and a job can be
deleted.
178
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
1
2
3
In the main screen (Scan mode), press the + or , key to select CANCEL
RESERV., and then press the Select key.
Press the + or , key to select the job to be deleted, and then press the
Select key.
"
"
To check the information for the selected job, press the ) key.
If no jobs are queued for transmission, NONE appears.
Press the + or , key to select YES, and then press the Select key.
The main screen (Scan mode) appears again.
Scanning With the Machine
Downloaded from ManualsPrinter.com Manuals
179
180
Downloaded from ManualsPrinter.com Manuals
Scanning With the Machine
9Replacing
Consumables
Downloaded from ManualsPrinter.com Manuals
Replacing Consumables
Note
Failure to follow instructions as outlined in this manual could result in
voiding your warranty.
Note
If an error message (Toner Empty, I-UNIT END, etc.) appears, print
out the configuration page, and then check the status of the other
consumables. For details on the error messages, refer to “Error Messages”
on page 255. For details on printing the configuration page, refer to
“Printing a Configuration Page” on page 213.
About Toner Cartridges
Your machine uses four toner cartridges: black, yellow, magenta, and cyan.
Handle the toner cartridges carefully to avoid spilling toner inside the machine
or on yourself.
"
"
Install only new toner cartridges in your machine. If a used toner cartridge is installed, the indicator message will not clear and the supplies
status in the Status Monitor will not be updated.
The toner is nontoxic. If you get toner on your skin, wash it off with
cool water and a mild soap. If you get toner on your clothes, lightly
dust them off as best as you can. If some toner remains on your
clothes, use cool, not hot water, to rinse the toner off.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
Note
Do not use refilled toner cartridges or unapproved toner cartridges. Any
damage to the machine or quality problems caused by a refilled toner
cartridge or an unapproved toner cartridge will void your warranty. No
technical support is provided to recover from these problems.
182
Downloaded from ManualsPrinter.com Manuals
Replacing Consumables
When replacing a toner cartridge, refer to the following table. For optimum
print quality and performance, use only approved Epson toner cartridges, as
listed in the table below. You can find the toner cartridge part numbers on the
consumables reorder label inside the front cover your machine.
Toner Cartridge Type
Toner Cartridge Parts Number
High-Capacity Toner Cartridge -Black (K)
S050493
High-Capacity Toner Cartridge -Yellow (Y)
S050490
High-Capacity Toner Cartridge -Magenta (M)
S050491
High-Capacity Toner Cartridge -Cyan (C)
S050492
"
For optimum print quality and performance, use only the corresponded TYPE genuine Epson toner cartridges.
Keep toner cartridges:
„ In their packaging until you’re ready to install them.
„ In a cool, dry location away from sunlight (due to heat).
„ The maximum storage temperature is 35°C (95°F) and the maximum storage humidity is 85% (noncondensing). If the toner cartridge is moved from
a cold place to a warm, humid place, condensation may occur, degrading
print quality. Allow the toner to adapt to the environment for about one
hour before use.
„ Level during handling and storage.
Do not hold, stand or store cartridges on their ends or turn them upside
down; the toner inside the cartridges may become caked or unequally
distributed.
Y
„ Away from salty air and corrosive gases such as aerosols.
Replacing Consumables
Downloaded from ManualsPrinter.com Manuals
183
Replacing a Toner Cartridge
Note
Be careful not to spill toner while replacing a toner cartridge. If toner
spills, immediately wipe it off with a soft, dry cloth.
If MACHINE SETTING/TONER EMPTY in the UTILITY menu is set to
STOP, the message TONER EMPTY/CHANGE X TONER (where “X” indicates the color of the toner) appears when the toner cartridge is nearly empty.
Follow the steps below to replace the toner cartridge.
1
2
3
Check the message window to see which color toner cartridge needs
replacing.
Open the machine’s front cover.
Pull the front lever of the color
toner cartridge indicated to the
right.
Y M C K
The replacement procedure for
the toner cartridge is the same
for all colors (yellow: Y, magenta:
M, cyan: C, and black: K).
Y
The following instructions show
the procedure to replace the
toner cartridge (Y).
184
Downloaded from ManualsPrinter.com Manuals
Replacing Consumables
4
Lower the lever to release the
lock.
Y
Y
5
Grab the handle of the toner cartridge to be replaced, and then
pull out the cartridge.
The following instructions show
the procedure to replace the
toner cartridge(Y).
Y
Y
Note
Dispose of the used toner cartridge according to your local regulations.
Do not burn the toner cartridge.
For details, refer to “About Toner Cartridges” on page 182.
6
7
Check the color of the new toner cartridge to be installed.
Remove the toner cartridge from the bag.
Replacing Consumables
Downloaded from ManualsPrinter.com Manuals
185
8
Shake the cartridge to distribute
the toner.
3×
Y
9
Make sure that the toner cartridge is the same color as the
machine compartment, and then
insert the toner cartridge into the
machine.
Y
Y
10
Make sure that the toner cartridge is securely installed, and
then peel off the protective film.
Y
Y
186
Downloaded from ManualsPrinter.com Manuals
Replacing Consumables
11
Raise the front lever to its original position.
Y
Y
12
Pull the lever to the left to lock it
in place.
"
13
The front lever should be
securely returned to its
original position; otherwise, the front cover of
the machine cannot be
closed.
Y
Close the front cover.
Replacing Consumables
Downloaded from ManualsPrinter.com Manuals
187
Replacing an Imaging Unit
When replacing an imaging unit, refer to the following table. For optimum print
quality and performance, use only approved Epson imaging units, as listed in
the table below. You can find the imaging unit part numbers on the consumables reorder label inside the front cover your machine.
Imaging Unit Type
Imaging Unit Parts Number
Imaging Unit -Black (K)
S051194
Imaging Unit -Yellow (Y)
S051191
Imaging Unit -Magenta (M)
S051192
Imaging Unit -Cyan (C)
S051193
Note
P
U
S
H
Do not touch the OPC drum
surface. This could lower image
quality.
Exposure to light can damage the
drum, causing dark or light areas
to appear on the printed page and
reducing the service life of the
drum.
Y
You are advised to replace the indicated imaging unit when the message
I-UNIT END/REPLACE X appears.
1
Check the message window to see which color imaging unit needs replacing.
188
Downloaded from ManualsPrinter.com Manuals
Replacing Consumables
2
3
Open the machine’s front cover.
Pull the front lever of the color
toner cartridge indicated to the
right.
Y M C K
The replacement procedure for
the imaging unit is the same for
all colors (yellow: Y, magenta: M,
cyan: C, and black: K).
The following instructions show
the procedure to replace the
toner cartridge (K).
4
K
Lower the lever to release the
lock.
K
K
Replacing Consumables
Downloaded from ManualsPrinter.com Manuals
189
5
Press down the area marked
“Push” on the imaging unit to be
replaced, and then slide the unit
all the way out of the machine.
K
The following instructions show
the procedure to replace the
imaging unit (K).
K
Note
Dispose of the used imaging unit according to your local regulations.
Do not burn the imaging unit.
6
Check the color of the new imaging unit to be installed.
"
7
In order to prevent toner from spilling, leave the imaging unit in the
bag until step 5 is being performed.
Remove the imaging unit from
the bag.
PUSH
K
190
Downloaded from ManualsPrinter.com Manuals
Replacing Consumables
8
"
SH
PU
Hold the imaging unit with both
hands, and then shake it twice
as shown in the illustration.
Y
Do not grab the bottom of
the bag; otherwise, the
imaging unit may be
damaged, resulting in
decreased print quality.
PUSH
Y
9
Remove all packing tape from
the imaging unit.
H
S
U
P
K
10
Remove the protective cover
from the imaging unit. The protective cover slides after having
turned.
P
U
S
H
K
Replacing Consumables
Downloaded from ManualsPrinter.com Manuals
191
11
12
Make sure that the new imaging
unit to be installed is the same
color as the machine compartment, and then install the imaging unit in the machine.
K
Raise the front lever to its original position.
K
K
13
Pull the lever to the left to lock it
in place.
"
The front lever should be
securely returned to its
original position; otherwise, the front cover of
the machine cannot be
closed.
K
192
Downloaded from ManualsPrinter.com Manuals
Replacing Consumables
14
Close the front cover.
Replacing Consumables
Downloaded from ManualsPrinter.com Manuals
193
Replacing the Waste Toner Bottle
When the waste toner bottle becomes full, the message WASTE TONER
FULL/REPLACE BOTTLE appears in the message window. The machine
stops and will not start again until the waste toner bottle is replaced.
When replacing an waste toner bottle, refer to the following table. For optimum print quality and performance, use only approved Epson waste toner
bottle, as listed in the table below.
Item
Part number
Waste Toner Bottle
S050498
1
Open the machine’s front cover.
194
Downloaded from ManualsPrinter.com Manuals
Replacing Consumables
2
Turn the dial on the waste toner
bottle counterclockwise until it is
in the unlock position.
Lock
3
Unlock
Open the left and right handles
of the waste toner bottle.
Replacing Consumables
Downloaded from ManualsPrinter.com Manuals
195
4
Grab the left and right handles of
the waste toner bottle, and then
slowly pull out the bottle.
"
5
Be careful since some
waste toner may spill if
the lock is closed when
the waste toner bottle is
removed.
Remove the new waste toner bottle from its packaging. Insert the used
waste toner bottle into the plastic bag included in the box, and then box it
up.
Note
Dispose of the used waste toner bottle according to your local
regulations. Do not burn the waste toner bottle.
"
6
Before installing the waste toner bottle, be sure that the dial on the
waste toner bottle is unlocked.
Slide the waste toner bottle all
the way into the machine.
196
Downloaded from ManualsPrinter.com Manuals
Replacing Consumables
7
Turn the dial clockwise until the
waste toner bottle is in the
locked position.
Unlock
8
Lock
Close the front cover.
"
If the waste toner bottle is not fully inserted or if the dial is not
locked, the front cover cannot be closed.
Replacing Consumables
Downloaded from ManualsPrinter.com Manuals
197
198
Downloaded from ManualsPrinter.com Manuals
Replacing Consumables
10Maintenance
Downloaded from ManualsPrinter.com Manuals
10
Maintaining the Machine
CAUTION
Read all caution and warning labels carefully, making sure to follow any
instructions contained in them. These labels are located on the inside of
the machine’s covers and the interior of the machine body.
Handle the machine with care to preserve its life. Abuse handling may cause
damage and void your warranty. If dust and paper scraps remain on the
inside or outside of the machine, machine performance and print quality will
suffer, so the machine should be cleaned periodically. Keep the following
guidelines in mind.
WARNING!
Turn off the machine, unplug the power cord, and disconnect all
interface cables before cleaning. Do not spill water or detergent into the
machine; otherwise the machine will be damaged and an electric shock
may occur.
CAUTION
The fuser unit is hot. When the right door is opened, the fuser
unit temperature drops gradually (one hour wait time).
„ Be careful when cleaning the inside of the machine or removing media
misfeeds, as the fuser unit and other internal parts may be very hot.
„ Do not place anything on top of the machine.
„ Use a soft cloth to clean the machine.
„ Never spray cleaning solutions directly on the machine’s surface; the
spray could penetrate through the air vents of the machine and damage
the internal circuits.
„ Avoid using abrasive or corrosive solutions or solutions that contain solvents (such as alcohol and benzene) to clean the machine.
„ Always test any cleaning solution (such as mild detergent) on a small
inconspicuous area of your machine to check the solution’s performance.
„ Never use sharp or rough implements, such as wire or plastic cleaning
pads.
„ Always close the machine’s covers gently. Never subject the machine to
vibration.
200
Downloaded from ManualsPrinter.com Manuals
Maintaining the Machine
„ Do not cover the machine immediately after using it. Turn it off and wait
until it cools down.
„ Do not leave the machine’s covers open for any length of time, especially
in well-lit places; light may damage the toner cartridges.
„ Do not open the machine during printing.
„ Do not tap media stacks on the machine.
„ Do not lubricate or disassemble the machine.
„ Do not tilt the machine.
„ Do not touch the electrical contacts, gears, or laser devices. Doing so may
damage the machine and cause the print quality to deteriorate.
„ Keep media in the output tray at a minimum level. If the media is stocked
too high, your machine may experience media misfeeds and excessive
media curl.
„ Make sure two people are available to lift the machine when
moving it.
Keep the machine level to avoid
toner spillage.
55 kg
121 lbs
„ When lifting the machine, fold up
Tray 1 and remove the output
tray, and then lift the machine as
shown in the illustration at the
right.
„ If the output tray and lower
feeder unit are installed, remove
them from the machine and
move each part separately.
„ If you get toner on your skin,
wash it off with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
„ Make sure any parts removed during cleaning are replaced before you
plug in the machine.
Maintaining the Machine
Downloaded from ManualsPrinter.com Manuals
201
Cleaning the Machine
CAUTION
Be sure to turn off the machine and unplug the power cord before
cleaning.
Exterior
„ Control Panel
„ Ventilation Grill
„ Machine Exterior
„ Original Window (a)
Exposure Window (b)
b
„ Original Cover Pad
a
202
Downloaded from ManualsPrinter.com Manuals
Cleaning the Machine
Media Rollers
The accumulation of paper dust and other debris on the media rollers can
cause media-feeding problems.
Cleaning the Media Feed Rollers (Manual Feed Tray)
1
2
Open Tray 1.
Press down on the center of the
paper-lifting plate until the left
and right locking tabs (white)
lock into place.
Cleaning the Machine
Downloaded from ManualsPrinter.com Manuals
203
3
4
Clean the media feed rollers by
wiping them with a soft, dry
cloth.
Close the tray.
204
Downloaded from ManualsPrinter.com Manuals
Cleaning the Machine
Cleaning the Media Feed Rollers (Tray 2/3)
1
2
3
Pull out the tray.
Clean the media feed rollers by
wiping them with a soft, dry
cloth.
Close the tray.
Cleaning the Machine
Downloaded from ManualsPrinter.com Manuals
205
Cleaning the Media Transfer Rollers for Tray 3
1
Open the right side cover of
Tray 3.
"
2
3
Before opening the right
side cover of Tray 3, fold
up Tray 1.
Clean the media transfer rollers
by wiping them with a soft, dry
cloth.
Close the right side cover of
Tray 3.
206
Downloaded from ManualsPrinter.com Manuals
Cleaning the Machine
Cleaning the Media Feed Rollers for the ADF
1
2
3
Open the ADF feed cover.
Clean the media feed rollers by
wiping them with a soft, dry
cloth.
Close the ADF feed cover.
Cleaning the Machine
Downloaded from ManualsPrinter.com Manuals
207
Cleaning the Media Feed Rollers for the Duplex
1
Pull the lever, and then open the
right door.
"
2
3
Before opening the right
door, fold up Tray 1.
Clean the feed rollers by wiping
them with a soft, dry cloth.
Close the right door.
208
Downloaded from ManualsPrinter.com Manuals
Cleaning the Machine
Laser Lens
This machine is constructed with four laser lenses. Clean all lenses as
described below. The laser lens cleaning tool should be attached to the inside
of the front cover.
1
2
3
Open the machine’s front cover
and remove the cleaning tool
from the machine’s front cover.
Insert the laser lens cleaning
tool into the laser lens cleaning
opening, pull it out, and then
repeat this back and forth movement 2 or 3 times.
Clean between each of the laser
lenses in the same way.
"
The laser lens cleaning
tool is included with the
machine.
Safely store the laser
lens cleaning tool so that
it will not be lost.
Cleaning the Machine
Downloaded from ManualsPrinter.com Manuals
209
4
5
Return the laser lens cleaning tool to its holder on the inside of the front
cover.
Close the front cover.
210
Downloaded from ManualsPrinter.com Manuals
Cleaning the Machine
11Troubleshooting
Downloaded from ManualsPrinter.com Manuals
11
Introduction
This chapter provides information to aid you in resolving machine problems
you may encounter, or at least guide you to the proper sources for help.
Printing a Configuration Page
page 213
Unlocking the Scanner
page 214
Preventing Media Misfeeds
page 215
Understanding the Media Path
page 216
Clearing Media Misfeeds
page 216
Solving Problems with Media Misfeeds
page 238
Solving Other Problems
page 241
Solving Problems with Printing Quality
page 248
Status, Error, and Service Messages
page 254
212
Downloaded from ManualsPrinter.com Manuals
Introduction
Printing a Configuration Page
1 In the main screen, press the + or , key to select REPORT/STATUS,
and then press the Select key.
2
3
4
Press the + or , key to select REPORT, and then press the Select key.
Press the + or , key to select CONFIGURATION PAGE, and then press
the Select key.
Press the Start-B&W key or the Start-Color key.
Printing a Configuration Page
Downloaded from ManualsPrinter.com Manuals
213
Unlocking the Scanner
1 Lift open the ADF cover.
2
Move the scanner lock lever to
.
3
Close the ADF cover.
4
Turn off the machine, and then turn it on again.
214
Downloaded from ManualsPrinter.com Manuals
Unlocking the Scanner
Preventing Media Misfeeds
Make sure that...
Media matches the machine specifications.
Media is flat, especially on the leading edge.
The machine is on a hard, flat, level surface.
You store media in a dry location away from moisture and humidity.
You remove transparencies from the output tray immediately after printing to
avoid static buildup.
You always adjust the media guides in Tray 2/3 after inserting the media (a
guide that is not properly adjusted can cause poor print quality, media misfeeds, and machine damage).
You load the media printing-side up in the tray (many manufacturers place
an arrow on the end of the wrapper to indicate the printing side).
Avoid...
Media that is folded, wrinkled, or excessively curled.
Double feeding (remove the media and fan the sheets—they may be sticking
together).
Fanning transparencies since this causes static.
Loading more than one type/size/weight of media in a tray at the same time.
Overfilling the trays.
Allowing the output tray to overfill (the output tray has a 250 sheet capacity—misfeeding may occur if you allow more than 250 sheets of media to
accumulate at one time).
Allowing the output tray to fill with more than a few transparencies.
Preventing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
215
Understanding the Media Path
Understanding the media path will help you locate media misfeeds.
1. ADF media feed rollers
1
2. Document feed tray
2
3
3. Document output tray
4. Toner cartridge
5. Fuser unit
Document path
6. Duplex
7. Tray 1 (manual feed tray)
4
13
5
8. Tray 3 (optional lower feed
unit)
6
12
9. Tray 2
11
10. Laser unit
10
11. Imaging unit
7
9
12. Transfer belt unit
8
13. Output tray
Media path
Clearing Media Misfeeds
To avoid damage, always remove misfed media gently, without tearing it. Any
piece of media left in the machine, whether large or small, can obstruct the
media path and cause further misfeeds. Do not reload media that has misfed.
Note
The image is not fixed on the media before the fusing process. If you
touch the printed surface, the toner may stick to your hands, so be
careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the machine.
216
Understanding the Media Path
Downloaded from ManualsPrinter.com Manuals
CAUTION
Unfused toner can mess your hands, clothes, or anything else it gets
on.
If you accidentally get toner on your clothes, lightly dust them off as
best as you can. If some toner remains on your clothes, use cool, not
hot water, to rinse the toner off. If toner gets on your skin, wash it off
with cool water and a mild soap.
CAUTION
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor.
If, after clearing the media misfeed, the misfeed message in the message
window persists, open and close the engine cover. This should clear the misfeed message.
Media Misfeed Messages and Clearing Procedures
Media Misfeed Message
Page Reference
PAPER MISFEED
page 221
OPEN RIGHT DOOR
PAPER MISFEED
page 224
OPEN TRANSPORT DOOR
FUSER JAM
page 230
OPEN RIGHT DOOR
TRANSFER ROLLER JAM
page 224
OPEN TRANSPORT DOOR
VERTICAL TRANS JAM
page 221
OPEN RIGHT DOOR
DUPLEX LOWER JAM
page 229
OPEN RIGHT DOOR
DUPLEX UPPER JAM
page 229
OPEN RIGHT DOOR
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
217
Media Misfeed Message
Page Reference
MP TRAY JAM
page 218
OPEN RIGHT DOOR
HORIZONTAL TRANS JAM
page 236
OPEN FRONT COVER
UP SCANNER UNIT
OUTPUT JAM
page 236
OPEN FRONT COVER
UP SCANNER UNIT
SWITCH BACK JAM
page 234
OPEN FRONT COVER
UP SCANNER UNIT
ORIGINAL DOC. JAM
page 227
OPEN DOC.FEED COVER
Clearing a Media Misfeed from Tray 1 (Manual Feed Tray)
and Transfer Roller
1
Pull the lever, and then open the
right door.
"
Before opening the right
door, fold up Tray 1.
218
Downloaded from ManualsPrinter.com Manuals
Clearing Media Misfeeds
2
Carefully pull out the misfed
media.
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers may result in
burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
219
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch the
surface of the image transfer belt
or transfer roller.
3
Close the right door.
220
Downloaded from ManualsPrinter.com Manuals
Clearing Media Misfeeds
Clearing a Media Misfeed in Tray 2
1
Pull the lever, and then open the
right door.
"
2
Before opening the right
door, fold up Tray 1.
Carefully pull out the misfed
media.
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
221
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers may result in
burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch the
surface of the image transfer belt
or transfer roller.
222
Downloaded from ManualsPrinter.com Manuals
Clearing Media Misfeeds
3
4
5
Close the right door.
Pull out Tray 2, and then remove
all media from the tray.
Fan the media you removed and
then align it well.
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
223
6
Load the media face up in Tray 2.
"
"
"
7
Make sure that the media is flat.
Do not load paper above the mark.
Slide the media guides against the edges of the media.
Close Tray 2.
Clearing a Media Misfeed in Tray 3
1
Open the right side cover of
Tray 3.
"
Before opening the right
side cover of Tray 3, fold
up Tray 1.
224
Downloaded from ManualsPrinter.com Manuals
Clearing Media Misfeeds
2
3
4
Carefully pull out the misfed
media.
Close the right side cover of
Tray 3.
Pull out Tray 3, and then remove
all paper from the tray.
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
225
5
6
7
Fan the paper you removed and
then align it well.
Load the paper face up in Tray 3.
"
"
"
Make sure that the paper is flat.
Do not load paper above the mark.
Slide the media guides against the edges of the paper.
Close Tray 3.
226
Downloaded from ManualsPrinter.com Manuals
Clearing Media Misfeeds
Clearing a Media Misfeed from the ADF
1
2
3
Open the ADF feed cover.
Remove the document from the
ADF document feed tray.
Lift to open the ADF cover.
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
227
4
Remove any misfed media.
"
If the edge of the white leading sheet in the ADF comes out, insert
it as it was before.
5
Close the ADF cover.
6
Close the ADF feed cover.
228
Downloaded from ManualsPrinter.com Manuals
Clearing Media Misfeeds
Clearing a Media Misfeed from the Duplex
1
Pull the lever, and then open the
right door.
"
2
3
Before opening the right
door, fold up Tray 1.
Carefully pull out the misfed
media.
Close the right door.
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
229
Clearing a Media Misfeed from the Fuser Unit
1
2
3
Open the machine’s front cover.
Slowly raise the scanner unit,
and open the cover.
Pull the lever, and then open the
right side cover.
"
Before opening the right
door, fold up Tray 1.
230
Downloaded from ManualsPrinter.com Manuals
Clearing Media Misfeeds
4
5
Push up the levers of the fuser
unit cover, and then open the
cover.
Carefully pull out the misfed
media.
"
If the misfed media cannot
be removed by pulling it
down, pull it from the top of
the fuser unit.
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
231
"
If the paper becomes crinkled and jammed in the fuser
unit, open the fuser unit
cover, and then remove the
paper.
CAUTION
The area around the fuser unit is
extremely hot.
Touching anything other than the
indicated levers may result in
burns. If you get burned,
immediately cool the skin under
cold water, and then seek
professional medical attention.
232
Downloaded from ManualsPrinter.com Manuals
Clearing Media Misfeeds
Note
Decreased print quality may
result if the surface of the image
transfer belt or the transfer roller
is touched.
Be careful not to touch the
surface of the image transfer belt
or transfer roller.
6
Push down the levers.
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
233
7
Close the right door; slowly
lower the scanner unit, and then
close the front cover.
Clearing a Media Misfeed from the Switchback
1
2
Open the machine's front cover.
Slowly raise the scanner unit,
and open the cover.
234
Downloaded from ManualsPrinter.com Manuals
Clearing Media Misfeeds
3
4
5
Slowly lower the horizontal
transport unit cover.
Carefully pull out the misfed
media.
Slowly lower the scanner unit.
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
235
6
Close the front cover.
Clearing a Media Misfeed from the Horizontal Transport
Area
1
2
Open the machine's front cover.
Slowly raise the scanner unit,
and open the cover.
236
Downloaded from ManualsPrinter.com Manuals
Clearing Media Misfeeds
3
4
5
Carefully pull out the misfed
media.
Close the cover, and slowly
lower the scanner unit.
Close the front cover.
Clearing Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
237
Solving Problems with Media Misfeeds
"
Frequent misfeeds in any area indicate that area should be checked,
repaired, or cleaned. Repeated misfeeds may also happen if you’re
using unsupported print media or original media.
Symptom
Cause
Solution
Several
sheets go
through the
machine
together.
The front edges of
the media are not
even.
Remove the media and even up the
front edges, then reload it.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Too much static elec- Do not fan transparencies.
tricity is present.
Media misfeed message stays
on.
Front cover needs to Open and close the front cover again.
be opened and
closed again to reset
the machine.
Some media remains Check the media path again to make
sure that you have removed all of the
misfed in the
misfed media.
machine.
Duplex misfeeds.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use Epson-approved media. See
“Specifications” on page 90.
Plain paper, recycled paper can be
autoduplexed if the media type is set
properly in the driver. See “Specifications” on page 90.
Make sure that you have not mixed
media types in the tray.
Do not duplex, envelopes, labels, letter
head, postcards, thick stock, glossy
media, or transparencies.
Media is still being
misfed.
238
Check the media path inside the
duplex again to make sure that you
have removed all of the misfed media.
Solving Problems with Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
Symptom
Cause
Solution
Media is mis- The loaded document Load the correct document. For details
fed in the
does not meet the
on the documents that can be loaded,
ADF.
specifications.
refer to “Documents that can be loaded
into the ADF” on page 117.
The loaded document Load the document so that it does not
exceeds the maxiexceed the maximum capacity. For
mum capacity.
details on the documents that can be
loaded, refer to “Documents that can
be loaded into the ADF” on page 117.
The document guides
were not slid against
the edges of the document.
Slide the document guides against the
edges of the document. For details on
loading the document, refer to “Loading a document into the ADF” on page
120.
Media is mis- The media is not cor- Remove the misfed media and reposition the media properly in the tray.
feeding.
rectly positioned in
the tray.
The number of sheets Remove the excess media and reload
in the tray exceeds
the correct number of sheets in the
the maximum
tray.
allowed.
The media guides are Adjust the media guides in the Tray 1
not correctly adjusted to match the size of the media.
to the media size.
Warped or wrinkled
Remove the media, smooth it out, and
media is loaded in the reload it. If it still misfeeds, do not use
tray.
that media.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Envelopes, labels,
postcards, thick
stock, letterhead,
glossy media, or
transparencies are
loaded in Tray 2.
Special media must be loaded in Tray
1 only.
The recommended
Load the transparencies or label
transparency or label sheets according to the manufacturer’s
sheet is facing the
instructions.
wrong way in Tray 1.
Solving Problems with Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
239
Symptom
Cause
Solution
Media is mis- Envelopes are facing Load the envelopes in Tray 1 with the
feeding.
the wrong way in Tray flaps facing up.
1.
If the flaps are on the long edge, load
the envelopes with the flap edge
toward the machine and the flap side
facing up.
Transparencies have Remove the transparencies and load
collected static elec- them in Tray 1 one sheet at a time. Do
tricity in the tray.
not fan transparencies before loading
them.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use Epson-approved media.
See “Specifications” on page 90.
The media feed roller Clean the media feed roller.
is dirty.
For more details, refer to “Media Rollers” on page 203.
240
Solving Problems with Media Misfeeds
Downloaded from ManualsPrinter.com Manuals
Solving Other Problems
To order Epson consumables, go to www.q-shop.com.
Symptom
Cause
Solution
Machine
The power cord is not Turn off the machine, confirm that the
power is not correctly plugged into power cord is correctly plugged into
on.
the outlet.
the outlet, and then turn on the
machine.
Something is wrong
with the outlet connected to the
machine.
Plug another electrical appliance into
the outlet and see whether it operates
properly.
The power switch is
not correctly turned
on (I position).
Turn the power switch off (O position),
then turn it back to the on (I position).
The machine is con- Use a power source with the specificanected to an outlet
tions listed in appendix A, “Technical
with a voltage or fre- Specifications.”
quency that does not
match the machine
specifications.
The control
panel displays
One of the toner car- Remove the toner cartridges and
tridges may be defec- check for damage. If it is damaged,
tive.
replace it.
Toner
Low much
Printed with heavy
toner coverage.
See specifications in Appendix A.
sooner than
expected.
Cannot print The tray is empty.
Check that at least Tray 1 is loaded
the machine
with media, in place, and secure.
status list.
There is a media mis- Clear the media misfeed.
feed.
Solving Other Problems
Downloaded from ManualsPrinter.com Manuals
241
Symptom
Cause
Solution
Images cannot be
printed from
the digital
camera.
The connected digital camera is not
compatible with
PictBridge.
Use a digital camera compatible with
PictBridge.
The digital camera
transfer mode is not
set to PictBridge.
Set the digital camera transfer mode to
PictBridge.
Printing from
a USB memory device is
not possible.
CAMERA DIRECT
Change the setting for UTILITY/
for this unit is set to
DISABLE.
ADMIN. MANAGEMENT/CAMERA
DIRECT to ENABLE.
A public user is not
specified for user
authentication.
Contact the administrator of this unit.
The file format (file
Only files with the format (extension)
extension) is not one for JPEG, TIFF, or PDF can be printed.
that can be printed.
A public user is not
specified for user
authentication.
Contact the administrator of this unit.
242
Downloaded from ManualsPrinter.com Manuals
Solving Other Problems
Symptom
Cause
Solution
Printing
takes too
much time.
The machine is set to
a slow printing mode
(for example, thick
stock or transparency).
It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
The machine is set to It takes time for printing to start in
power saving mode. power saving mode.
The job is very complex.
Wait. No action needed.
There is not enough
machine memory.
Install the optional memory to increase
the machine's memory capacity.
A toner cartridge for a Install a correct Epson toner cartridge
different region or an approved for your specific machine.
unapproved toner
cartridge is installed
(Wrong Toner X
is displayed in the
message window).
If an error has been Wait. No action needed.
detected during printing job transmission
in the Copy mode, it
takes a while to process the error and
resume the printing
operation.
Blank pages One or more of the
are printed. toner cartridges are
defective or empty.
The wrong media is
being used.
Check the toner cartridges. The image
will not print correctly or not at all, if the
cartridges are empty.
Check that the media type.
Solving Other Problems
Downloaded from ManualsPrinter.com Manuals
243
Symptom
Cause
Solution
Not all pages A different user acci- Try printing the remaining pages.
print.
dentally canceled the
job.
The tray is empty.
Check that the tray is loaded with
media, in place, and secure.
A document is printed Print the overlay file using a suitable
with an overlay file
printer driver.
which has been created by an unsuitable printer driver.
Some parts
of the image
are lost with
2in1 (4in1)
copying.
When printing envelopes, the zoom ratio
was specified, and
then 2in1 (4in1) copying was set.
Machine
The power cord is not
resets or
correctly plugged into
turns off fre- the outlet.
quently.
A system error
occurred.
With 2in1 (4in1) copying, the zoom
ratio is automatically adjusted. For 2in1
(4in1) copying on media with a narrow
printing area, such as envelopes, set
2in1 (4in1) copying, and then adjust
the zoom ratio, if necessary.
Turn off the machine, confirm that the
power cord is correctly plugged into
the outlet, and then turn on the
machine.
Contact Technical Support with the
error information.
244
Downloaded from ManualsPrinter.com Manuals
Solving Other Problems
Symptom
Cause
Solution
You are
experiencing duplex
problems.
Media or settings are Make sure that you are using correct
not correct.
media.
„ See “Specifications” on page 90.
„ Do not duplex custom-sized media,
envelopes, labels, postcards, thick
stock, letterhead, glossy media, or
transparencies.
„ Make sure that you have not mixed
media types in the tray.
In the Windows printer driver (Layout/
Print Type), choose “Double-Sided.”
Set duplex (Double-Sided) copying.
For details on setting duplex (Double-Sided) copying, refer to “Setting
Duplex (Double-Sided) Copying” on
page 147.
For N-up on duplexed pages, choose
Collate only in the printer driver’s Basic
Tab. Do not set collation in the application.
It takes a
very long
time to transfer scan data
to the USB
memory
device.
The response time
Wait until the transfer is finished.
may be slow depending on the USB memory device that is
used.
It is not pos- An error has occurred Correct the cause of the error, and
sible to enter in Copy mode.
then enter a different mode.
Scan mode.
With N-up on
multiple copies, the output is
incorrect.
Both the printer driver
and the application
have been set for collation.
For N-up on multiple copies, choose
Collate only in the printer driver’s Basic
Tab. Do not set collation in the application.
Booklet Left
and Right
Binding output is incorrect.
Both the printer driver
and the application
have been set for collation.
For Booklet Left Binding and Booklet
Right Binding, choose Collate only in
the printer driver’s Basic Tab. Do not
set collation in the application.
Solving Other Problems
Downloaded from ManualsPrinter.com Manuals
245
Symptom
Cause
Solution
You hear
unusual
noises.
The machine is not
level.
Place the machine on a flat, hard, level
surface.
The tray is not
installed correctly.
Remove the tray that you are printing
from and reinsert it completely into the
machine.
There is a foreign
object stuck inside
the machine.
Turn off the machine and remove the
object. If you cannot remove it, contact
Technical Support.
A malfunction may
have occurred while
paper was being
transferred with the
ADF.
If a band appears in the copy after
copying, select a copy density setting
that is one level darker.
When copying or scanning with the
ADF, a band
appears at
the end of
the image or
paper (5 to 6
mm).
If a band appears in the image after
scanning, scan using the original
glass.
Cannot copy Envelope DL, Enve- Place the document on the original
with the ADF. lope Monarch, or
glass. With the Envelope DL size,
Envelope C6 is set to some areas may not be copied.
the ADF.
While scanning with the
ADF at 600
dpi, the
image has
become
lighter and
the background has
become
darker.
Immediately after the
machine is turned on,
the lamp intensity
increases. Therefore, the image may
become lighter and
the background may
become darker.
Scanned
images are
noisy.
Resolution is set to
Set the scan mode to PHOTO.
150 x 150 dpi while
the scan mode is set
to MIX or TEXT.
If the image becomes lighter or darker,
scan using the original glass. In addition, perform the scan operation after
turning the machine on and lighting the
lamp for an hour and a half or more.
Some areas Acrobat 8 (Macintosh With the Acrobat Scan setting, turn off
of the
version) is used for
the OCR and Filtering functions.
scanned
scanning the image.
image are
missing.
246
Downloaded from ManualsPrinter.com Manuals
Solving Other Problems
Symptom
Cause
Solution
The
web-based
utility cannot
be accessed.
The Web-based
EpsonNet config
Administrator's password is incorrect.
The Web-based EpsonNet config
Administrator password has a 0-character minimum and an 16-character
maximum. For details of the
Web-based EpsonNet config administrator password, refer to the Reference
Guide on the software CD-ROM.
Media is
wrinkled.
The media is moist
Remove the moist media and replace it
from humidity or hav- with new, dry media.
ing water spilled on it.
The media feed roller Check them for damage. If necessary,
or fuser unit is defec- contact Technical Support with the
tive.
error information.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Data was
sent to the
machine, but
it doesn't
print.
Use Epson-approved media. See
“Specifications” on page 90.
An error message is Handle according to the message disdisplayed in the mes- played.
sage window.
A job may be canClick the User Authentication button in
celled if user authen- the printer driver, and then type in the
tication setting is
necessary information before printing.
specified.
The hard
The hard disk was
disk was
full.
automatically formatted.
When the control panel displays HDD
NEAR FULL, delete print jobs and
resources (fonts, forms, etc.) which
were saved on the hard disk using
Web-based EpsonNet config.
Solving Other Problems
Downloaded from ManualsPrinter.com Manuals
247
Solving Problems with Printing Quality
Symptom
Cause
Solution
Nothing is
printed, or
there are
blank spots
on the
printed page.
One or more of the
Remove the toner cartridges and
toner cartridges may check if any is damaged.
be defective.
One or more of the
Remove the imaging units and check
imaging units may be for damage. If it is damaged, replace it.
defective.
The media is moist
from humidity.
Adjust the humidity for media storage.
Remove the moist media and replace it
with new, dry media.
The media set in the
printer driver mismatches the media
loaded in the
machine.
Load the correct media in the machine.
Several sheets are
Remove the media from the tray and
being fed at the same check for static electricity. Fan plain
time.
paper or other media (but not transparencies), and replace it in the tray.
Entire sheet
is printed in
black or
color.
248
One or more of the
Remove the toner cartridges and
toner cartridges may check for damage. If it is damaged,
be defective.
replace it.
One or more of the
Remove the imaging units and check
imaging units may be for damage. If it is damaged, replace it.
defective.
Solving Problems with Printing Quality
Downloaded from ManualsPrinter.com Manuals
Symptom
Cause
Image is too Laser lens is dirty.
light; there is The copy density is
low image
set too light.
density.
The media is moist
from humidity.
There is not much
toner left in the cartridge.
Solution
Clean the laser lens.
Select a darker copy density.
Remove the moist media and replace
with new, dry media.
Replace the toner cartridge.
One or more of the
Remove the toner cartridges and
toner cartridges may check for damage. If it is damaged,
be defective.
replace it.
Media type is set
incorrectly.
Image is too The copy density is
dark.
set too dark.
The document was
not pressed close
enough against the
original glass.
When printing envelopes, labels, letter
head, postcards, thick stock, glossy
media, or transparencies, specify the
appropriate media type in the printer
driver.
Select a lighter copy density.
Position the document so that it is
pressed close enough against the original glass. For details on positioning
the document on the original glass,
refer to “Placing a document on the
original glass” on page 119.
One or more of the
Remove the toner cartridges and
toner cartridges may check for damage. If it is damaged,
be defective.
replace it.
One or more of the
Remove the imaging units and check
imaging units may be for damage. If it is damaged, replace it.
defective.
Solving Problems with Printing Quality
Downloaded from ManualsPrinter.com Manuals
249
Symptom
Cause
Solution
Image is
blurred;
background
is lightly
stained;
there is
insufficient
gloss of the
printed
image.
One or more of the
Remove the toner cartridges and
toner cartridges may check for damage. If it is damaged,
be defective.
replace it.
One or more of the
Remove the imaging units and check
imaging units may be for damage. If it is damaged, replace it.
defective.
The original glass is
dirty.
Clean the original glass. For details,
refer to “Cleaning the Machine” on
page 202.
The original cover
pad is dirty.
Clean the original cover pad. For
details, refer to “Cleaning the Machine”
on page 202.
The print or One or more of the
Remove the toner cartridges and
color density toner cartridges may check for damage. If it is damaged,
is uneven.
be defective or low.
replace it.
One or more of the
imaging units is
defective.
Remove the imaging units and check
for damage. If it is damaged, replace it.
The machine is not
level.
Place the machine on a flat, hard, level
surface.
Irregular
The media is moist
print or mot- from humidity.
tled image
appears.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Adjust the humidity in the media storage area.
Remove the moist media and replace it
with new, dry media.
Use Epson-approved media. See
“Specifications” on page 90.
One or more of the
Remove the toner cartridges and
toner cartridges may check for damage. If it is damaged,
be defective.
replace it.
One or more of the
imaging units is
defective.
250
Remove the imaging units and check
for damage. If it is damaged, replace it.
Solving Problems with Printing Quality
Downloaded from ManualsPrinter.com Manuals
Symptom
Cause
Solution
There is
insufficient
fusing or the
image
comes off
when
rubbed.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size, thickness, type, etc.) is
being used.
Use Epson-approved media. See
“Specifications” on page 90.
Media type is set
incorrectly.
When printing envelopes, labels, letter
head, postcards, thick stock, or transparencies, specify the appropriate
media type in the printer driver.
There are
toner
smudges or
residual
images.
One or more of the
Remove the toner cartridges and
toner cartridges are check for damage. If it is damaged,
defective or installed replace it.
incorrectly.
There are
toner
smudges on
the back side
of the page
(whether or
not it has
been
duplexed).
The media transfer
roller is dirty.
Clean the media transfer roller.
The media path is
dirty with toner.
Print several blank sheets and the
excess toner should disappear.
One or more of the
toner cartridges are
defective.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
One or more of the
imaging units is
defective.
Remove the imaging units and check
for damage. If it is damaged, replace it.
If you think the transfer roller should be
replaced, contact Technical Support
with the error information.
Solving Problems with Printing Quality
Downloaded from ManualsPrinter.com Manuals
251
Symptom
Cause
Solution
Abnormal
areas (white,
black, or
color) appear
in a regular
pattern.
The laser lens is dirty. Clean the laser lens.
The exposure window is dirty.
A toner cartridge may Remove the toner cartridges with the
be defective.
color causing the abnormal image.
Replace it with a new toner cartridge.
One or more of the
imaging units is
defective.
Image
defects.
Clean the exposure window. For
details, refer to “Cleaning the Machine”
on page 202.
Remove the imaging units and check
for damage. If it is damaged, replace it.
The laser lens is dirty. Clean the laser lens.
A toner cartridge may Remove the toner cartridges and
be leaking.
check for damage. If it is damaged,
replace it.
A toner cartridge may Remove the toner cartridge with the
be defective.
color causing the abnormal image.
Replace it with a new toner cartridge.
One or more of the
Remove the imaging units and check
imaging units may be for damage. If it is damaged, replace it.
defective.
Lateral lines
or bands
appear on
image.
The machine is not
level.
Place the machine on a flat, hard, level
surface.
The media path is
dirty with toner.
Print several sheets and the excess
toner should disappear.
One or more of the
Remove the toner cartridges and
toner cartridges may check for damage. If it is damaged,
be defective.
replace it.
One or more of the
imaging units is
defective.
Colors look
drastically
wrong.
252
Remove the imaging units and check
for damage. If it is damaged, replace it.
One or more of the
Remove the toner cartridges and verify
toner cartridges may that the toner is distributed evenly on
be defective.
each cartridge roller, and reinstall the
toner cartridges.
Solving Problems with Printing Quality
Downloaded from ManualsPrinter.com Manuals
Symptom
Cause
Solution
Colors are
not registering properly;
colors are
mixed or
have
page-to-pag
e variation.
Gradations are not
adjusted correctly.
Set MACHINE SETTING/CALIBRATION in the UTILITY menu to
ON, and then perform the AIDC color
calibration. For details, refer to
“MACHINE SETTING Menu” on page
27.
The front cover is
opened during the
calibration.
One or more of the
Remove the toner cartridges and
toner cartridges may check for damage. If it is damaged,
be defective.
replace it.
The media is moist
from humidity.
Remove the moist media and replace it
with new, dry media.
The color
One or more of the
Remove the imaging units and check
has a poor
imaging units may be for damage. If it is damaged, replace it.
reproduction defective.
or has poor
color density.
If the problem is not resolved, even after all of the above have been performed, contact Technical Support with the error information.
Solving Problems with Printing Quality
Downloaded from ManualsPrinter.com Manuals
253
Status, Error, and Service Messages
Status, error, and service messages are displayed in the message window.
They provide information about your machine and help you locate many problems. When the condition associated with a displayed message has changed,
the message is cleared from the window.
Status Messages
This message...
means...
Do this...
ACCEPTED
The settings were applied. No action needed.
DATA RECEIVING
This machine is receiving
data.
ENERGY SAVE
(Nothing displayed)
The machine is in Energy
Save mode to reduce
power consumption during
periods of inactivity.
NONE
The object does not exist.
PC SCAN CANCEL
The scan job was canceled from the driver.
PLEASE WAIT!
The AIDC color calibration
is being performed.
The AIDC color calibration
is performed automatically
in the following circumstances.
„ When the machine is
turned on
„ When the machine
recovers from Energy
Save (Sleep) mode
„ When the machine is
restarted after settings
have been changed
„ After a toner cartridge is
replaced
This process maintains
optimum print quality.
254
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
This message...
means...
Do this...
PRINT WAITING
The machine is waiting to
print.
PRINTING
The machine is printing.
SEARCHING
The machine is searching
data.
SCANNING
The machine is scanning
the document.
Warming Up
The machine is warming up
or AIDC is being performed.
Error Messages
This message...
means...
Do this...
2-SIDED SCAN SETTING The document is not Load the document
loaded into the ADF into ADF.
SET ORIGINAL TO ADFR while duplex (dou-
ble-sided) scanning
is set.
ADDRESS IS TOO LONG
The e-mail address
retrieved from the
LDAP server
exceeds 64 characters.
This machine can handle addresses containing no more than 64
bytes. Use a shorter
address.
CANNOT CONNECT
A connection with
the specified server
could not be established.
Check the settings in
the NETWORK SETTING menu, and then
try connecting again.
The IP address of
the specified server
could not be
obtained from the
DNS server.
Check the settings in
the NETWORK SETTING menu, and then
try sending the data
again.
xxx Server
CANNOT GET IP
xxx Server
PC CONNECTION FAILED While data was
being sent in Scan
mode, the connection to the computer
was interrupted.
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
Check the connection
with the computer and
the scanner driver status, and then try sending the data again.
255
This message...
means...
Do this...
COMMUNICATION ERROR
While data was
being sent in Scan
mode, the connection to the USB
memory device was
interrupted.
Check the connection
to the USB memory
device, and then try
sending the data
again.
While data was
being sent in Scan
mode, the connection to the server
was interrupted.
Check the settings in
the NETWORK SETTING menu, and then
try sending the data
again.
The connection to
the USB memory
device was interrupted.
Check the connection
to the USB memory
device, and then try
sending the scan
again.
USB Memory
COMMUNICATION ERROR
xxx Server
DISCONNECT
USB Memory
DISCONNECT
The connection to
Check the settings in
the server was inter- the NETWORK SETrupted.
TING menu, and then
try connecting again.
xxx Server
Fuser Unit Life
The time to replace Replace the fuser unit.
the fuser unit has
Contact a qualified serbeen reached.
vice representative.
HOLD JOB ERROR
The hard disk drive To store jobs, install
is not installed on
the optional hard disk
the machine so a
drive on the machine.
job to be stored
could not be
received.
UNABLE TO STORE JOB
HOLD JOB ERROR
MEMORY FULL
HOLD JOB ERROR
NO TRAY3
256
Since the memory is Create free space on
full, stored jobs can- the memory, and then
not be printed.
try printing the stored
jobs again.
Since Tray 3 is not
installed, stored
jobs cannot be
printed.
To print the jobs, install
Tray 3, and then try
printing the stored jobs
again.
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
This message...
means...
Do this...
INCORRECT
A hard disk drive
that was formatted
with a different
machine has been
installed.
Format the hard disk
with this machine, or
install a hard disk drive
formatted with this
machine.
HDD
I-UNIT END
REPLACE x
The time to replace Replace the indicated
the indicated imag- imaging unit.
ing unit has been
reached.
I-Unit End x
The time to replace Replace the indicated
the indicated imag- imaging unit.
ing unit has been
reached.
I-Unit Life (x)
The time to replace Replace the indicated
the indicated imag- imaging unit.
ing unit has been
reached.
I-Unit Low x
The indicated imag- Prepare the indicated
ing unit is low and
imaging unit.
should be replaced
within 200 pages at
5% coverage of Letter/A4 paper.
HDD
A job to be stored
was received even
though the hard disk
drive is not installed
on the machine.
NEAR FULL
INCORRECT TONER
CHANGE x TONER
Delete jobs stored on
the hard disk, or format
the appropriate user
area.
The indicated toner Replace the indicated
cartridge is not cor- toner cartridge with a
rect.
correct one.
INCORRECT PAPER SIZE The paper size set
Follow the message
in the tray is not cor- and replace the paper.
rect.
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
257
This message...
means...
Do this...
JOB CANCELED
While a document
was being scanned
from the original
glass in Scan mode,
more than one
minute had passed
after the first page
of the document
was scanned or the
data could not be
sent. Therefore, the
scan job was automatically canceled.
Turn the machine off,
and then, after waiting
a few seconds, turn it
on again. When sending multiple pages, for
example, from a book,
scan the first page, and
then scan the next
page within one
minute.
MEDIA TYPE ERROR
Paper of the
Load paper of the
selected type is not selected type into a
loaded in a paper
paper tray.
tray.
LOAD xxx
MEMORY FILE FULL
The maximum number of 1,024 image
data files has been
reached.
Turn the machine off,
and then, after a few
seconds, turn it on
again. Decrease the
amount of data to be
printed (for example,
by decreasing the resolution), and then try
printing again.
MEMORY FULL
The machine has
received more data
than can be processed with its internal memory.
Turn the machine off,
and then, after a few
seconds, turn it on
again. Decrease the
amount of data to be
printed (for example,
by decreasing the resolution), and then try
printing again.
NO DUPLEX PAPER
Duplex (double-sided) printing is
CLOSE DUPLEX FUNC.
specified, but paper
OR CHANGE PAPER SIZE with a size incompatible with duplex
(double-sided) printing is selected.
258
Switch to simplex (single-sided) printing, or
select paper with a size
compatible with duplex
(double-sided) printing.
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
This message...
means...
Do this...
NO NETWORK SETTING
The network settings had not been
completely specified
when the machine
was switched to
Scan mode.
Before scanning in
Scan mode, specify
the network settings in
the NETWORK SETTING and E-MAIL
SETTING menus.
NO SUITABLE PAPER
Paper suitable for
printing is not
loaded in a paper
tray.
Load paper suitable for
printing into a paper
tray.
LOAD PAPER (xxx)
NOT INSTALLED I-UNIT The indicated imag- Install the indicated
CHECK x
NOT INSTALLED TONER
CHECK x
ing unit is not
installed.
imaging unit.
The indicated toner Install the indicated
cartridge is not
toner cartridge.
installed.
NOT REGISTERED
No address destina- Directly type in the
tion or group desti- destination address for
nation is registered. the scan data, or register an address destination or group
destination and try
specifying the destination address again.
OUTPUT TRAY FULL
The output tray is
full of paper.
REMOVE PAPER
Remove all paper from
the output tray.
OVER SEARCH TIME
Communication with Establish a connection
the LDAP server
with the LDAP server
has timed out.
again.
PAPER EMPTY
The indicated paper Load media into the
tray has run out of indicated tray.
paper.
LOAD PAPER (xxx)
PAPER SIZE ERROR
RESET PAPER (xxx)
Paper of the
selected size is not
loaded in a paper
tray.
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
Load paper of the
selected size into a
paper tray.
259
This message...
means...
Do this...
REMOVE ORIGINAL
The document is
loaded in the ADF
while a function is
set that requires
scanning from the
original glass.
Place the document on
the original glass.
IN ADFR
RESULTS ARE OVER xxx The LDAP search
Change the maximum
results exceed the setting, or change the
maximum specified search conditions (for
example, increase the
with MAX.
SEARCH RESULT length of the keyword), and then try
in the LDAP SETperforming the LDAP
TING menu.
search again.
SCANNER MOTION ERROR The scanner is
CHECK SCANNER LOCK
SCANNER UNIT OPEN
CLOSE SCANNER UNIT
SERVER MEMORY FULL
SMTP Server
THE PARTY IS FULL
260
Move the scanner lock
locked.
lever to , and then
turn the machine off,
then on again. For
details, refer to
“Unlocking the Scanner” on page 214.
The scanner unit is
open.
Close the scanner unit.
The memory of the
SMTP server has
become full.
Free up some space
on the disk, for example, by contacting your
server administrator.
The maximum number of 236 destinations for the scan
data has been
reached.
Send the data, and
then try scanning
again. Otherwise,
delete unnecessary
destinations before
adding the desired
ones.
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
This message...
means...
TONER EMPTY
The indicated toner Replace the indicated
cartridge has
toner cartridge.
become empty.
(This message
appears if TONER
EMPTY on the
MACHINE SETTING menu is set to
STOP.)
CHANGE x TONER
Do this...
Toner Low x
The indicated toner Prepare the indicated
cartridge is low and toner cartridge.
should be replaced
within 200 pages at
5% coverage of Letter/A4 paper.
Trans. Belt Life
The time to replace Replace the transfer
the transfer belt unit belt unit.
has been reached.
Contact a qualified service representative.
Trans. Roll. Life
The time to replace Replace the transfer
the transfer roller
roller.
has been reached.
Contact a qualified service representative.
TRAYx OPEN
The indicated paper Close the indicated
tray is open.
paper tray.
CLOSE TRAYx
UNABLE TO
COLLATE JOB
Since the hard disk
(area for saving
copies when printing sets) is full, copies cannot be
printed as sets.
Print only one set at a
time, or reduce the
number of pages to be
printed.
USB Dev. Not support A USB device
Disconnect the USB
incompatible with
device from this
this machine is con- machine.
nected.
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
261
This message...
means...
Do this...
USB Hub Not support
A USB hub is connected to this
machine.
This machine is not
compatible with a USB
hub. When connecting
USB cables to this
machine, do not use a
USB hub.
USB MEMORY FULL
There is no space
available on the
USB memory
device connected to
this machine.
Delete data from the
USB memory device to
create free space, or
use a different USB
memory device.
xxx COVER OPEN
The indicated cover Close the indicated
is open.
cover.
CLOSE xxx COVER
xxx DOOR OPEN
The indicated door
is open.
Close the indicated
door.
xxx SERVER ERROR
The file cannot be
saved on the indicated server.
Check the status of the
indicated server.
WASTE TONER FULL
The waste toner
bottle is full.
Replace the waste
toner bottle.
Waste Near Full
The waste toner
bottle will soon be
full.
Prepare a waste toner
bottle.
Wrong I-Unit x
An imaging unit
incompatible with
the machine is
installed.
Replace the indicated
imaging unit with a correct one.
WRONG PASSWORD
The password is
incorrect, so the
indicated server
could not be
accessed.
Check the password,
and then specify the
correct one.
A toner cartridge
incompatible with
the machine is
installed.
Replace the indicated
toner cartridge with a
correct one.
CLOSE xxx DOOR
REPLACE BOTTLE
xxx
Wrong Toner x
262
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
This message...
means...
Do this...
xxx IS DISABLED
The TCP/IP, FTP,
SMTP or SMB settings are disabled.
Enable the TCP/IP,
FTP, SMTP or SMB
settings.
DESTINATION SET
There were more
than 16 addresses
found with an LDAP
search.
Increase the number of
entered characters,
and then perform the
search again.
BY MANUAL UP TO 16
Service Messages
These messages indicate a more serious fault that can only be corrected by a
customer service engineer. If one of these messages appears, turn the
machine off, then turn it on again. If the problem persists, contact your local
vendor or authorized service provider.
This service message...
means...
Do this...
MACHINE TROUBLE
An error has been
detected with the item
indicated “xxxx” in
the service message.
Reboot the machine.
This often clears the
service message,
and machine operation can resume.
SERVICE CALL (xxxx)
If the problem persists, contact Technical Support.
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
263
264
Status, Error, and Service Messages
Downloaded from ManualsPrinter.com Manuals
12Installing
Accessories
Downloaded from ManualsPrinter.com Manuals
12
Introduction
Note
Any damage to the machine caused by the use of accessories not
manufactured or supported by Epson will void your warranty.
This chapter provides information about the following accessories.
Dual In-Line
Memory Module
(DIMM)
256 MB, 512 MB DIMM
(DDR2-667 SO-DIMM, 166 MHz, 200pins, No ECC,
Unbuffered, CL=3)
Density : 512 Mbits
Organization : 64 Mwords x 8 bits
Tray 3
Lower feeder unit with 500-sheet tray included
Hard Disk Drive
40GB Hard Disk
Note
The hard disk drive cannot be installed to be used at the same time.
Installing accessories always requires that the machine and
accessories are turned off and unplugged during installation.
266
Downloaded from ManualsPrinter.com Manuals
Introduction
Antistatic Protection
Note
It’s very important to protect the printer controller board from
electrostatic damage while performing any task involving the controller
board.
Turn off all power switches first. If an antistatic wrist strap is provided in
your printer option kit, attach one end of it to your wrist and the other
end to the bare metal chassis on the back of your printer. Never attach
the wrist strap to any piece of equipment with an electrical current
present. Plastic, rubber, wood, and painted metal surfaces are not
acceptable grounding points.
If you don’t have an antistatic wrist strap, discharge your body’s static
electric charge by touching a grounded surface before you handle any
printer boards or components. Also avoid walking around after
grounding yourself.
Antistatic Protection
Downloaded from ManualsPrinter.com Manuals
267
Dual In-Line Memory Module (DIMM)
"
"
You may need additional memory (DIMM) for complex graphics and
for duplex (double-sided) printing.
This machine detects only half of the amount of the installed memory.
Dual in-line memory module (or DIMM) is compact circuit board with
surface-mount memory chips.
There is 256 MB of onboard memory and one available memory
expansion slot. The memory can be expanded to a maximum of
768 MB (256 MB + 512MB).
Installing a DIMM
Note
It's very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 253. In addition,
always handle circuit boards by the edges only.
1
268
Turn off the machine and disconnect the power cord and interface cables.
Dual In-Line Memory Module (DIMM)
Downloaded from ManualsPrinter.com Manuals
2
3
Remove the rear cover.
Using a screwdriver, loosen the
screw.
"
4
Do not remove any screw
other than the one
indicated in the
illustration.
Open the inside cover.
Dual In-Line Memory Module (DIMM)
Downloaded from ManualsPrinter.com Manuals
269
5
6
7
8
9
10
11
Insert the new DIMM straight
into the DIMM connector until
the latches snap into the locked
position.
Observe the keyed side of the
DIMM to align it with the connector. If you cannot snap the DIMM
into place, do not force it. Reposition it, making sure that the
DIMM is seated completely in
the connector.
Close the inside cover, and then tighten the screw.
Close the rear cover.
Reconnect all interface cables.
Reconnect the power cord, and
turn on the machine.
Declare the additional Printer
Memory in the Windows printer driver (Properties/Configure tab).
Print a configuration page (REPORT/STATUS / REPORT / CONFIGURATION PAGE) and verify that the total amount of the RAM installed in
your printer is listed.
270
Dual In-Line Memory Module (DIMM)
Downloaded from ManualsPrinter.com Manuals
Hard Disk Drive
If you install a hard disk drive, the followings can be performed:
„ Job printing/saving
„ Fonts/forms/color profile download
„ User Authentication
„ Direct printing
Installing the Hard Disk drive
Note
It's very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 267. In addition,
always handle circuit boards by the edges only.
1
Turn off the machine and disconnect the power cord and interface cables.
Hard Disk Drive
Downloaded from ManualsPrinter.com Manuals
271
2
3
Remove the rear cover.
Using a screwdriver, loosen the
screw.
"
4
Do not remove any screw
other than the one indicated
in the illustration.
Open the inside cover.
272
Downloaded from ManualsPrinter.com Manuals
Hard Disk Drive
5
6
7
8
9
Plug the cable on the hard disk
drive into the connector on the
controller board.
Insert the three mounting pins
on the hard disk drive into the
holes in the controller board to
mount the hard disk drive onto
the controller board.
Close the inside cover, and then tighten the screw.
Close the rear cover.
Reconnect all interface cables.
Hard Disk Drive
Downloaded from ManualsPrinter.com Manuals
273
10
11
Reconnect the power cord, and
turn on the machine.
Declare the Hard Disk in the Windows printer driver (Properties/Configure
tab).
274
Downloaded from ManualsPrinter.com Manuals
Hard Disk Drive
Tray 3 (Lower Feeder Unit)
You can install up to one optional lower feeder unit (Tray 3). The lower feeder
unit increases your machine’s media feed capacity by 500 sheets.
Kit Contents
„ Lower feeder unit with a tray (500-sheet capacity)
Tray 3 (Lower Feeder Unit)
Downloaded from ManualsPrinter.com Manuals
275
Installing Tray 3
Note
Since consumables are installed in the machine, be sure to keep the
machine level when moving it in order to prevent accidental spills.
1
2
3
Turn off the machine and disconnect the power cord and interface cables.
Prepare the lower feeder unit.
"
Be sure to place the lower feeder unit on a level surface.
Open the right side cover of the
lower feeder unit.
"
The right side cover of the lower feeder must be opened before the
feeder can be installed onto the machine.
276
Downloaded from ManualsPrinter.com Manuals
Tray 3 (Lower Feeder Unit)
4
With another person’s help,
place the machine on top of the
lower feeder unit, making sure
that the positioning pins on the
lower feeder unit correctly fit into
the holes on the bottom of the
machine.
55 kg
121 lbs
WARNING!
This machine weighs approximately 55 kg (121 lb) when it is fully
loaded with consumables. The machine must be lifted by two people.
5
6
Close the right side cover of the
lower feeder unit.
Reconnect all interface cables.
Tray 3 (Lower Feeder Unit)
Downloaded from ManualsPrinter.com Manuals
277
7
8
Reconnect the power cord, and
turn on the machine.
Declare the Tray 3 in the Windows printer driver (Properties/Configure
tab).
278
Downloaded from ManualsPrinter.com Manuals
Tray 3 (Lower Feeder Unit)
AAppendix
Downloaded from ManualsPrinter.com Manuals
Technical Specifications
Type
Desktop (Tandem Full Color A4 laser beam
printer-based all-in-one)
Document holder
Stationary
Developing system
Mono-component SMT
Fusing system
Belt fusing system
Resolution
Copying: 1200 dpi x 600 dpi, 600 dpi x 600 dpi
Scanning: 600 dpi x 600 dpi, 600 dpi x 300 dpi
(when using ADF)
Printing: 600 x 600 dpi x 4 bit
First print
Simplex
„ Monochrome/Full Color
18.0 seconds for A4/Letter (plain paper)
First copy
Simplex
„ Monochrome
25.0 seconds for A4/Letter (plain paper)
(Normal 600 x 300 dpi)
„ Full color
28.0 seconds for A4/Letter (plain paper)
(Normal 600 x 300 dpi)
Print speed
Simplex
„ Monochrome/Full Color
24/24 pages per minute for A4
(plain paper)
Copy speed
Simplex
„ Monochrome/Full Color
24/24* pages per minute for A4 (plain paper)
(Normal 600 x 300 dpi)
* When using ADF: 20 pages per minute (Full
color)
Warm-up time
Avg. 50 seconds or less (time to return to Ready
mode from Energy Save mode)
280
Downloaded from ManualsPrinter.com Manuals
Technical Specifications
Media sizes
Tray 1 (manual feed tray)
„ Paper width: 92 to 216 mm (3.6" to 8.5")
„ Paper length: 148 to 356 mm (5.8" to 14.0")
Tray 2
„ Paper width: 92 to 216 mm (3.6" to 8.5")
„ Paper length: 148 to 297 mm (5.8" to 11.7")
Tray 3 (optional)
A4, B5, Executive, Letter, G-Legal, Legal
Paper/Media
Plain paper (60 to 90 g/m2, 16 to 24 lb bond)
Recycled paper (60 to 90 g/m2, 16 to 24 lb bond)
Transparency
Letterhead
Envelopes
Labels
Thick stock 1 (91 to 150 g/m2)
Thick stock 2 (151 to 210 g/m2)
Postcard
Glossy 1 (100 to 128 g/m2)
Glossy 2 (129 to 158 g/m2)
Input capacity
Tray 1 (manual feed tray)
„ Plain/recycled paper: 100 sheets
„ Envelopes: 10 envelopes
„ Transparency, letterhead, labels, thick stock
1/2, postcard, glossy media 1/2: 20 sheets
Tray 2
Plain/recycled paper: 250 sheets
Tray 3 (optional)
Plain/recycled paper: 500 sheets
Output capacity
Output tray: 250 sheets
Operating temperature 10 to 35 °C (50 to 95 °F)
Technical Specifications
Downloaded from ManualsPrinter.com Manuals
281
Operating humidity
15% to 85%
Power supply
220 to 240 V (50 to 60 Hz, ±3%)
Power consumption
220 to 240 V: 1250 W or less
Energy save mode: 25 W or less
Amperage
220 to 240 V: 6 A or less
Acoustic noise
Standby: 39 dB or less
Printing: 53.5 dB or less
Copying: 54.5 dB or less
External dimensions
Height: 578 mm (22.8")
Width: 539 mm (21.2")
Depth: 590 mm (23.2")
Weight
50 kg (without consumables)
55 kg (with consumables)
Interface
USB 2.0 (High Speed) compliant, 10Base-T/
100Base-TX/1000Base-T Ethernet, Host USB
(PictBridge1.0, USB Device Printing) RJ-45 connector
Standard memory
Printer: 256 MB, Copier: 256 MB
282
Downloaded from ManualsPrinter.com Manuals
Technical Specifications
Entering Text
When specifying the user name or programming the recipient name with
one-touch dial keys, letters, accented characters, numbers and symbols can
be entered.
Key Operation
Use the keypad to enter numbers, letters, and symbols.
List of characters available with each key of the keypad
Entering Names
Keypad
Available characters
Key
[1]
[A]
1
1
.,'?¿!¡"1-()@/:;_
2
2
ABC2abcÆÇàáâãäåæç
3
3
DEF3defÐèéêëð
4
4
GHI4ghiìíîï
5
5
JKL5jkl€£¢
6
6
MNO6mnoØŒñòóôõöøœº
7
7
PQRS7pqrsß$
8
8
TUV8tuvùúûü
9
9
WXYZ9wxyzÞýþ
0
0
(space)0
#
#
*+×÷=#%&<>[]{}\|µ^`~
Entering Text
Downloaded from ManualsPrinter.com Manuals
283
Entering E-mail Addresses
Keypad
Available characters
Key
[1]
[A]
1
1
.@_-1
2
2
ABC2abc
3
3
DEF3def
4
4
GHI4ghi
5
5
JKL5jkl
6
6
MNO6mno
7
7
PQRS7pqrs
8
8
TUV8tuv
9
9
WXYZ9wxyz
0
0
(space)0
#
#
+&/*=!?()%[]^`´{}|~$,:
Changing Input Mode
Each press of the
ters.
key switches the input mode between numbers and let-
[1…]: Numbers can be typed in.
[A…]: Letters can be typed in.
Inputting Example
The procedure for entering text is described below, using “NJ Office” as an
example.
1
2
3
4
5
Press the
key to change the input mode so that letters can be entered.
Press the 6 key twice.
“N” is entered.
Press the 5 key once.
“J” is entered.
Press the 0 key once.
A space is entered.
Press the 6 key three times.
“O” is entered.
284
Downloaded from ManualsPrinter.com Manuals
Entering Text
6
7
8
9
10
11
Press the 3 key seven times.
“f” is entered.
Press the ) key.
The cursor moves to the right.
Press the 3 key seven times.
“f” is entered.
Press the 4 key seven times.
“i” is entered.
Press the 2 key seven times.
“c” is entered.
Press the 3 key six times.
“e” is entered.
Entering Text
Downloaded from ManualsPrinter.com Manuals
285
Correcting Text and Input Precautions
„ To erase all entered text, hold down the Back key.
„ To delete only part of the entered text, use the * and ) keys to move the
cursor (_) to the character that you want to delete, and then press the
Back key.
„ If multiple characters are assigned to a single key, “OK=)” appears at the
bottom of the screen.
„ If the same key is to be used to enter two characters in a row, press the )
key after selecting the first character. (Refer to the above inputting example.)
„ To enter a space, press the 0 key.
286
Downloaded from ManualsPrinter.com Manuals
Entering Text
Our Concern for Environmental Protection
As an ENERGY STAR® Partner, we have determined that this machine meets
the ENERGY STAR Guidelines for energy efficiency.
What is an ENERGY STAR product?
An ENERGY STAR product has a special feature that allows it to automatically switch to a “low-power mode” after a period of inactivity. An ENERGY
STAR product uses energy more efficiently, saves you money on utility bills
and helps protect the environment.
Our Concern for Environmental Protection
Downloaded from ManualsPrinter.com Manuals
287
288
Our Concern for Environmental Protection
Downloaded from ManualsPrinter.com Manuals
Index
Numerics
B
2in1/4in1 copy 142
Basic tab 127
A
C
Address
Editing/deleting address 173
Registering address (direct input)
170
Registering address (LDAP search)
171
Selecting address 162
Address book
Searching address 164
Selecting address 164
Address register menu 50
Admin. Management menu 34
Advanced tab 127
Antistatic protection 267
Camera Direct 132
Collated copy 149
Configuration menu 25
Consumables
Imaging unit 188
Toner cartridge 182
Waste toner bottle 194
Control panel 12
Copy
2in1/4in1 copy 142
Collated copy 149
Copy density 140
Copy mode 139
Duplex 147
ID card copy 144
289
Downloaded from ManualsPrinter.com Manuals
Poster copy 146
Repeat copy 145
Select media tray 141
Zoom ratio 140
Copy Setting menu 48
Cover Page tab 128
D
Direct Print menu 53
Dual in-line memory module 268
Duplex
Copy 147
Scan 177
E
Electrostatic discharge 267
Entering text 283
Correcting text 286
Input mode 284
Input precautions 286
Envelope 93
F
Favorite list
Deleting address 169
Registering address 168, 169
Selecting address 162
G
Glossy media 97
Group
Editing/deleting address 175
Registering address 174
Selecting address 163
H
Hard disk Drive 271
I
ID card copy 144
Imageable area 99
Input mode 284
K
Key operation 283
L
Label 94
Layout tab 128
LDAP server
Registering address 171
Searching address 165
Letterhead 95
Loading document 119
Loading media 100
Lower feeder unit 275
M
Machine Setting menu 27
Maintenance 200
Media
Clearing misfeeds 216
Loading 100
Path 216
Preventing misfeeds 215
Media misfeed
ADF 227
Duplex 229
Fuser unit 230
Horizontal transport area 236
Switchback 234
Transfer roller 218
Tray 1 218
Tray 2 221
Tray 3 224
Media path 216
Memory Direct 134
Memory Print menu 86
Message window 12
Messages
Error messages 255
Media misfeed messages 217
Service messages 263
Status messages 254
Misfeed problems 238
Clearing 216
Media path 216
290
Downloaded from ManualsPrinter.com Manuals
Paper menu 57
Proof/Print menu 55
Quality menu 60
Sys Default menu 80
Preventing 215
O
Original media
Loading 119
Other tab 130
Output Tray 115
P
Page margins 99
Paper menu 57
Paper Setup menu 31
Plain paper 91
Postcard 95
Poster copy 146
Print media 90
Imageable area 99
Storage 116
Print media type
Envelope 93
Glossy media 97
Label 94
Letterhead 95
Plain paper 91
Postcard 95
Recycled paper 91
Thick stock 92
Transparency 96
Print quality 248
Print screen 21
Printer driver
Setting 126
Printer driver (Postscript, PCL)
Advanced tab 127
Cover page tab 128
Displaying 125
Overlay tab 128
Quality tab 129
Uninstalling 124
Version tab 130
Printer driver (PPD)
Displaying 125
Uninstalling 124
Proof/Print menu 55
PS/PCL print menu 55
Q
Quality menu 60
Quality tab 129
R
Recycled paper 91
Repeat copy 145
Report/Status menu 22
Reporting menu 51
S
Scan 152
Data format 176
Delete queued transmission job 178
Duplex 177
Resolution 176
Scan color 178
Scan density 177
Scan mode 177
Scan size 178
Scan to E-mail 161
Scan to FTP 161
Scan to SMB 161
Scan to USB Memory 160
Specify data location 159
Specify destination address 161
Subject 178
Scan Setting menu 51
Scanned data destination address
Delete destination address 168
Edit destination address 167
Register destination address 168
Specify destination address 161
Specify multiple destinations 167
Scanner driver
TWAIN driver (Macintosh) 156
TWAIN driver (Windows) 153
WIA driver (Windows) 155
Select media tray 141
291
Downloaded from ManualsPrinter.com Manuals
Service messages 263
Storage
Print media 116
Sys Default menu 80
System requirements 10
T
Thick stock 92
Toner remaining 22
Transparency 96
Troubleshooting 211
Media misfeed 238
Status, error, and service messages
254
TWAIN driver
For Macintosh 156
For Windows 153
U
USB memory device 160
Utility menu 25
Address Register menu 50
Admin. Management menu 34
Copy Setting menu 48
Direct Print menu 53
Machine Setting menu 27
Paper Setup menu 31
Reporting menu 51
Scan Setting menu 51
W
Watermark/Overlay tab 128
WIA driver 155
Z
Zoom ratio 140
292
Downloaded from ManualsPrinter.com Manuals