Machines, Accessories and Tools

®
Machines, Accessories and Tools
T he I nd us t r y St a nd a r d
Lockformer® is pleased to provide you with the latest
edition of our product catalog. On the following pages,
you’ll find the industry’s widest range of highperformance Heating, Ventilation and Air Conditioning
(HVAC) products, built to a standard of quality that’s
second to none. For your convenience, we’ve listed as
much detail as possible about each piece of equipment.
If you would like additional information or if you have
any questions, please contact us at (630) 964-8000.
T he Lockformer® Advantage
Lockformer ® offers you much more than the
industr y ’s finest product — we also offer an
unrivaled level of after-sales care and attention. Rest
assured, when you commit to purchasing a
Lockformer ® product, we commit all of our resources
and expertise to you, making sure that you receive
the maximum return on your investment.
Whether you have a maintenance request, want to
upgrade your hardware or software, or just need a
question answered, our experienced team of
qualified professionals offers you the kind of careful
assistance that is so rare these days. Should you
need a spare part, we’ll get it to you quickly — even
if you don’t know the serial number of the machine
or part. What’s more, each Lockformer ® purchase
comes with one of the best warranties available,
anywhere, and our nationwide network of
knowledgeable distributors means that you are
assured of ongoing local support.
Invest in Lockformer ® and see for yourself why we
set the standard for product quality, performance,
customer ser vice and integrity — the standard
against which every equipment manufacturer in the
HVAC industry is judged.
®
Galv. Sheet
Gauge No.
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Decimal
Equivalent
0.0635
0.0575
0.0516
0.0456
0.0396
0.0366
0.0336
0.0306
0.0276
0.0247
0.0217
0.0202
0.0187
0.0172
0.0157
All capacities of machines listed are based upon the use
of galvanized or C.R.S. materials.
TABLE OF
CONTENTS
H V A C RO L L F O R M I N G M A C H I N E S
Pittsburgh Lock Model 24
Pittsburgh Lock Model 20
Pittsburgh Lock Model 20
Super Speed
Pittsburgh Lock Models 14–16–18
Fast Seam Rollset
Auto-Guide Flanger 16–18
03
04
04
05
S NA P L O C K M A C H I NE S
Button Punch Snap Lock
Button Punch Snap Lock Flanger
Button Punch Cheek Bender
06
07
08
D UC T C O N NE C T O R M A C H I N E S
8900 Cleatformer
Triplex Cleatformer
Cross-Over System
Drive Turn Hemming
Standing “S” Cleat
14 Station DS Conector Machine
09
10
11
12
13
14
T D C MA C H I N E S
TDC V
TDC
TDC Triplex
TDC Notcher
Corner Cadet
15
16
17
18
19
POW E R N OT C H I N G MA C H I N E S
Speednotch Model 16
Residential Notcher
20
21
R O U N D / O V A L M A C H I NE S
Collar Maker
Spin Collar Maker
Round/Oval Pipe Machine
Automated Furnace Pipe
Rolling System
02
03
A C C E S S O RY M A C H I NE S A N D T O O L S
6016 Beader
26
Cheek Bender
27
Easy Edger
27
Galv-Off
27
Cold Sealant System
28
P L A S M A C UT T I N G M A C HI NE S
Vulcan 1000D
Vulcan 2900
Vulcan 2900 Double Table
Vulcan 3100D
Vulcan 1600 WaterJet
29
30
31
32
33
P R O D U C T SP E C I F I C A T I O N S
HVAC Rollforming Machines
Snap Lock Machines
Duct Connector Machines
TDC Machines
Power Notching Machines
Round/Oval Machines
Accessory Machines and Tools
Plasma Cutting Machines
Special Rollforming Machines
Auxiliary Rolls
34
34
36
36
36
38
38
40
40
42
22
23
24
25
Photos are shown without guards for clarity purposes only.
Photos may also depict machines with special features that are optional.
2
HVAC ROLLFORMING
MACHINES
Pittsburgh Lock Model 24
Model 24 shown with optional flanger
Compact and lig ht enoug h to be taken rig ht to the
job, yet cost-effective enoug h to be a stand-by
machine for your shop, this machine is built to
de liver heavy-duty service. Ideal for 24 g aug e
materials or lig hter. Place it on a bench, plug it in,
and it’s ready to produce.
Model Details
Pittsburgh Lock profile
Optional auto-guide power
flanging attachment
The auto-guide power
flanging attachment will
create this right-angled flang e
P I T T S BU R G H L O C K M O D E L 2 4 P R O F I L E
5/16"
A ut o- G u i d e Pow e r F l an g i n g A t tac h m e nt
For Pittsburgh Lock Models 20 & 24
Auto-Guide will automatically follow any edg e —
straig ht, inner or outer radii — and no chang e over
is necessary between Pittsburg h Lo ck and flanging
operations.
Automatically handles radii down to 3-1/4". Lo ck
out the automatic feature to run a radius down to
1-3/8". Two Auto-Guide Power Flanging Attachment
mode ls are available, one for Mode l 24 and one for
Mode l 20.
HVAC ROLLFORMING
MACHINES
Pittsburgh Lock Model 20
and Model 20 Super Speed
Model 20 shown with optional flanger
In 1937, we introduced the first truly practical lo ck
forming machine. It significantly cut the time
required for making duct and it completely
revolutionized the sheet metal working industry.
N o t e : Model 20 Super Speed is not available with the
optional flanging attachment.
Model Details
Pittsburgh Lock profile
Optional auto-guide power
flanging attachment
The auto-guide power
flanging attachment will
create this right-angled flange
P I T T S B UR G H L OC K M OD E L 20 A ND M O D E L 2 0 SU P E R S P E E D P R OF I L E
5/16"
3
4
HVAC ROLLFORMING
MACHINES
Pittsburgh Lock
Models 14–16–18
These powerful performers offer the HVAC industry
day-in/day-out service. The 14, 16 or 18 gauge
Pittsburgh Lock machines have 7 forming stations
with 2 forming positions. One position forms the
Pittsburg h Lo ck, while an auxiliary or outboard
position has the ability of forming 1 of 8 profiles
depending on the contractor ’s needs.
Model Details
Fast Seam profile
Fast Seam rollset
P I T T S BU R G H L O C K P R O F I L E
1/2"
3/8"
14 and 16 gauge
18 gauge
HVAC ROLLFORMING
MACHINES
Auto-Guide Flanger 16–18
This power flang er has the “auto-guide” feature,
which automatically controls the forming of a
rig ht-angle flang e. It will contour and follow any
edg e, straig ht or curved. Using the convenient
table slot, the operator mere ly turns up a starting
edg e, starts the material throug h the rolls and lets
go. A calibrated dial sets the auto-guide for work
with radii as small as 3-1/4". Two flang e heig hts
are available — please specify 3/8" or 1/4".
Model Details
Right-angle flange
A U T O- G UI D E F L A NG E R 16 - 1 8 P R O F I L E
5
6
SNAP LOCK
MACHINES
Button Punch Snap Lock
20 gauge model shown
Specially designed for commercial and industrial
ductwork, these Button Punch Snap Lock machines
will turn out perfectly formed locks. They will produce
both a receiver lock (inboard rolls) and a buttonpunched rig ht-angle flang e (outboard rolls). Two
models are available in both a 20 gauge (9-station)
and lighter material, or a 24 gauge (7-station) and
lighter material.
Model Details
Outboard roll profile
Inboard roll profile
B U T T O N P U N C H S N AP L O C K P R O F I L E
+
=
SNAP LOCK
MACHINES
Button Punch Snap Lock Flanger
Roll single-direction curves down to a minimum radius
of 3-1/2" inside or a 5" outside radius, almost
automatically. These punched right-angle flanged
curves fit perfectly in the receiver formed on the
Lockformer® 20 gauge or the 24 gauge Button Punch
Snap Lock.
Model Details
Outboard roll profile
BU T T O N P U N C H S N AP L O C K F L A N G E R P R O F I L E
+
=
7
8
SNAP LOCK
MACHINES
Button Punch Cheek Bender
This machine provides any shop with a complete
work center for fabricating fittings. One side of the
dual purpose bending die bends and punches the
cheeks for Button Punch Snap Lo ck 90-degree
fittings. Flip the die over and you have a 20 g aug e
Power Cheek Bender for making rig ht-angle flang es
for Pittsburg h fittings.
Model Details
Machine furnished with
115V 1 H.P. motor with
self-contained hydraulic
unit
From Button Punch Snap Lock
to Pittsburgh — remove three
bolts, invert die and rebolt in
place
B U T T O N P U N CH C HE E K B E N D E R P R O F I LE
+
=
uge
DUCT CONNECTOR
MACHINES
8900 Cleatformer
This Cleatformer is a “super speed” performer
specially designed for extra-hig h-speed production
of “S” cleats, plus a number of other choices of
profiles available for mounting on the auxiliary
shafts. It will produce these shapes at an averag e
speed of 75 feet per minute.
Model Details
“S” cleat inboard profile
Form Roll Configuration
8 9 0 0 C LE A T F O R M E R P R O F I L E
"S" cleat inboard 22-28 gauge
You g et 9 forming stations for absolute control of
part shape and accuracy, plus the same heavy-duty
g ear construction as the Pittsburg h Lo ck Mode ls
16 and 18 — with heavy-duty production roller
race cag e bearings throug hout transmission and
reduction g earing.
9
10
DUCT CONNECTOR
MACHINES
Triplex Cleatformer
Shown with optional “S” and drive cleat scrap cutter attachment
For reinforced “S” and drive cleats plus two optional
auxiliary sheet-edge operations. Combination “S” and
drive cleat scrap cutter attachment available.
Every 9-station Triplex Cleatformer incorporates
Lo ckformer ® ’s tri-plate construction and reinforced
flat “S” cleat. The inboard “S” and drive cleat roll
sets are furnished as standard between plate
housings. Extended shafts on both sides of the
Model Details
“S” cleat inboard profile
Drive cleat roll profile
“S” and drive cleat scrap
cutter attachment
Form Roll Configuration
Plate housing
T R I P L E X C LE A T F O R M E R P R O F I L E
Drive Drive
cleat cleat
rolls inboard
20-2620-26
gaugegauge
rolls inboard
"S" cleat
inboard
22-28
gaugegauge
"S" cleat
inboard
22-28
machine can accommodate many other sheet-edg e
operations, including the 20 g aug e Pittsburg h Lo ck
and the Button Punch Snap Lo ck.
Triplex construction provides two inboard forming
positions supported between side plates. This
bearing support on both sides of the profile controls
deflection encountered when running heavy-g aug e
material or unusually intricate shapes.
DUCT CONNECTOR
MACHINES
Cross-Over System
Footsteps and lost motion cost money. You can cut
down on both of these with a Lo ckformer ® CrossOver System tailored to fit your specific
requirements. With this method of “in-line
production,” you can e liminate turning a sheet
metal blank around and the need to bring long duct
sections around the machine to form the second
profile.
2b
3-in-1
Combination Rolls
1a
Male Section Button
Punch Snap Lock
20 Gauge Button
Punch Snap Lock
Triplex Cleatformer
1b
Female Section Button
Punch Snap Lock
2a
2a
Pittsburgh
Lock
2b
2b
3-in-1
Combination Rolls
1a
Male Section Button
Punch Snap Lock
20 Gauge Button
Punch Snap Lock
Triplex Cleatformer
1b
Female Section Button
Punch Snap Lock
2a
Pittsburgh
Lock
P R OF IL E S
1a
1b
2a
2b
11
12
DUCT CONNECTOR
MACHINES
Drive Turn Hemming
The Lockformer ® Skip Dent Indexing Roll is the heart
of the system. The indexer is the first roll and has
four pins and two milled ridges. The control lever
determines whether the blank is hemmed after the
first or second notch. With the lever in position 1, as
the blank engages the indexing roll, a pin drops into
the first notch. A ridge adjacent to the pin prebends
Model Details
Indexing roll
Rollset
Control lever
the material at its corner just enough to force the
material into the hem forming rolls where the 180
degree hem is formed. The next pin, on the rotating
index roll, drops into the second notch and since
there is no ridge present, the corner of the blank is
not turned down and misses the hemming rolls and
this section remains unformed.
DUCT CONNECTOR
MACHINES
Standing “S” Cleat
In just one pass, form a shape that combines a
conventional “S” cleat with a standing seam for
greater strength and rigidity. This seam is
adaptable in fabrication of larg e trunk or branch
lines in industrial and commercial heating and
ventilating units. Included are double-extended
auxiliary shafts for a variety of choices for optional
rollform tooling. The design integrity and quality
construction of its 10-station configuration will
provide years of trouble-free service.
Model Details
Detail of rollform
“S” cleat profile
Drive cleat rolls inboard 20-26 gauge
ST A N D I N G “ S” C L E A T P R OF I LE
1"
1-1/8"pocket
"S" cleat inboard 22-28 gauge
13
14
TDC
MACHINES
14 Station DS Connector Machine
This Lo ckformer ® 14-Station Connector Machine is
for the contractor who has need for only one duct
connector profile inboard but wants the flexibility
of two outboard auxiliary forming stations. It has
the same rigid double plate construction as the
popular Lo ckformer Standing “S” Cleat Machine yet
offers more forming stations, more combinations of
standard rolls and more versatility.
3-3/8”
8”
1-1/8” dia. Shafts
6” Horizontal Centers
3-1/2” Vertical Centers
TDC
MACHINES
TDC V
The NEW TDC V Rollformer has 12 forming stations
and produces TDC™ flanges at speeds of up to 50 feet
per minute.
Famous Lockformer® quality construction with an
industrial motor; high precision bearings; heavy duty
three zone chassis; plate head constuction; hardened
and ground roll shafts all protected with ’s top-quality
primer and paint finish. Optional rolls are available for
TDC Clip production.
Model Details
Rollset
T DC A S SE M BL E D P R O F I L E
TDC profile
joined
TDC profile
joined with
optional clip
15
16
TDC
MACHINES
TDC
Rollforming your own sealable flang es on
transverse duct ends during the manufacturing
pro cess has never been easier. The TDC flang e,
formed on the machine’s left-hand auxiliary, has
unique, snap-on corners that e liminate spot
we lding. Optional rolls are also available for Z-Bar
and TDC Clip.
Model Details
TDC flange profile
Optional clip flange profile
T D C A SS E M B L E D P R OF I L E
TDC profile
joined
TDC profile
joined with
optional clip
TDC
MACHINES
TDC Triplex
The TDC has been expanded into a tri-plate
construction, allowing an optional second inboard
profile to be formed. This is especially practical for
our international market, where the benefit of 25
mm and 35 mm TDC II can be produced on one
rollformer.
Model Details
TDC flange profile
Optional clip flange profile
T DC A S SE M BL E D P R O F I L E
TDC profile
joined
TDC profile
joined with
optional clip
17
18
TDC
MACHINES
TDC Notcher
Shown as combination, 3 heads TDC and 3 heads drive cleat
With the Notcher, you can gang-notch sheet metal
hydraulically up to 600% faster than by hand.
Hydraulic shut-off valves provide quick, individual
notching head control; a measuring tape set in the
back g aug e bar allows instant lo cating of the
heads; and a lo cking handle aids in the adjusting of
the notch depth.
Metal
3 HEAD
Metal
5 HEAD
Metal
6 HEAD
AND
Metal
TDC
MACHINES
Corner Cadet
Althoug h the Corner Cadet is portable and lig ht in
weig ht, it’s heavy on performance, automatically
inserting and crimping specially designed TDC/F
corners in seconds. In addition to handling virtually
every style of duct, the Corner Cadet also works
with multiple types of fittings.
Model Details
TDC/F corner
19
20
POWER NOTCHING
MACHINES
Speednotch Model 16
Shown with 5 Notching Heads
Speednotch allows you to gang-notch sheet metal
hydraulically up to 600% faster than by hand,
without layout or scribing. It’s the perfect tool for
preparing ductwork to receive bar, slip or “S” and
other drive connections. So its profitability is
tremendous … even on single piece set-up.
Complete se lf-containment provides instantaneous
setting from the front for up to 5 notches on
materials up to 16 g aug e with 3-1/4" to 10' stretch
out, and a foot switch permits one man, unskilled, to
handle most notching jobs.
POWER NOTCHING
MACHINES
Residential Notcher
Specifically designed to fit the needs of shops with
a volume of 20 g aug e work … but equally valuable
in larg er shops as a companion to the Lo ckformer ®
16 g aug e capacity Speednotch. The back g aug e
bar holding notching heads has a direct-reading
tape to provide simple, fast set-up. The lo cking
handle allows adjustment of notch depth and end
notch pattern. And individual head control lets you
notch single-piece or two-piece duct.
21
22
ROUND/OVAL
MACHINES
Collar Maker
Notch, bead, crimp and roll complete round starting
collars, 3" to 14" in diameter out of 24 to 30 gauge
galvanized — in only one pass! Just cut to width and
length or use scrap. This machine uses either 3" or
6" width blanks with simple movement of the crimp
roll.
Model Details
Collars
Crimp roller
ROUND/OVAL
MACHINES
Spin Collar Maker
Make your own spin collars in minutes. Just cut
g alvanized stock (24 gauge & lighter) to width and
length, set the diameter from 4" to 16", and push the
blank against the automatic stop. A synchronized die
notches the lead edge for easy spin-installation on the
job site. The notched piece is then pushed past the
stop, feeding the part into the rollformer and finally
into the automatic crimping and curling operations.
Two mode ls are available — Mode l 6 (2" to 6") and
Mode l 12 (2" to 12").
Model Details
Spin collar
23
24
ROUND/OVAL
MACHINES
Round/Oval Pipe Machine
7-station shown below
Available in either 7-station or 9-station (for precurl) machines which fabricate both male and female
forms for Reeves-type snap lo ck. Each lo ck is formed
on flat sheets with no restrictions on the diameter
of the finished pipe.
R O U N D /O V A L P I P E M A C H I N E F O R M S
ROUND OVAL
MACHINES
Automated Furnace
Pipe Rolling System
9-station shown below
Save time and money by rolling your own pipe.
Lockformer®’s advanced system produces oval or 3" to
14" diameter round pipe from 2' to 10' in length out of
24 to 30 gauge galvanized steel with the turn of a dial.
Just feed blank material into the 9-station duplex
rollforming machine where male and female
configurations are formed.
Model Details
Pipe roll
A UT O M A T E D F U R NA C E P I P E R O LL I N G S Y S T E M F O R M S
The blank is then de livered to a two-stag e conveyor
where it’s oriented and fed in a perfect 90° angle to
the pipe-rolling machinery. That’s all there is to it!
The pipe is complete ly finished and ready for
packing into shipping bundles.
25
26
ACCESSORY MACHINES
AND TOOLS
Round/Oval Pipe Machine
When the job calls for heavy-duty “giants,” this
machine tool is it. With this 6016 Beader, only one
operator is needed to produce SMACNA-approved
beads 4 to 5 times faster than cross braking. It
forms 5 beads, on 12" centers, adjustable to 1/8"
depth. Maximum capacity is 16 g aug e material and
one operator can easily handle sheets up to 60"
wide.
Model Details
Gauge bars
6"
12"
12"
12"
12" 6"
60"
6 0 1 6 B E A DE R F O R M
or
Maximum depth 1/8"
3" Minimum
3" Minimum
1/8"
ACCESORY MACHINES
AND TOOLS
Cheek Bender
Galv-Off
A two-way trunnion keeps the bending bar in
position at the starting point to assure perfect
bends throug hout the entire length. Mounting bolts
are included. 20 g aug e maximum.
Softens and dissolves g alvanizing buildup on
forming rolls and press dies. Lubricates as it
cleans. Handy 12 oz. aerosol size.
12 ounce aerosol size
Easy Edger
Turn perfect flang es on e lbows or other curved
fittings as fast as you can notch them. No g aug e to
set. Hand clamps to any bench. 20 g aug e
maximum.
27
28
ACCESSORY MACHINES
AND TOOLS
Cold Sealant System
These portable cold sealant units (available in
both 5-g allon and fixed 55-gallon sizes) should be
factory installed to all Lo ckformer ® rollforming
machines and are available with one to four gun
systems. Optical eye trigg ers are included to adjust
flow. Snuffer devices are also included to e liminate
leakag e in the shut-off position. From pump
assemblies to nozzles, ever ything is quality
engineered for top performance. The sealant itse lf
is specially formulated to produce perfect, nontoxic, flame-retardant sealing beads to ductwork
in-shop or on-site. Beads that won’t crust or shrink
— even under temperature conditions.
PLASMA CUTTING
MACHINES
Vulcan 1000D
As an industry-fo cused machinery manufacturer,
our mission is to deliver the latest designs in plasma
cutting system technology better than anyone else. The
innovative Vulcan 1000D, whose revised features
incorporate almost 20 years of engineering experience,
does just that. In the HVAC industry, where labor costs
are hig h and work is hard, physical and
demanding, (just like our machinery), the Vulcan
1000D’s performance advantag e is real proof that
quality and re liability matter.
Model Details
Excellent cut quality in a
wide variety of materials.
29
30
PLASMA CUTTING
MACHINES
Vulcan 2900
Lockformer®’s Vulcan Plasma Cutting Systems are costeffective, hig h-precision alternatives to laser cutting
systems. Typically used on materials up to 3/8"
thick, Vulcan Plasma Cutting Systems de liver the
hig hest quality cuts in the industry and will match
tig ht tolerances with li ttle or no edg e preparation.
The Vulcan will traverse metals at up to 1000" per
minute. The system’s powerful capabilities are
controlled from both its control pane l and easy-touse software.
PLASMA CUTTING
MACHINES
Vulcan 2900 Double Table
Increase productivity with the Vulcan 2900 Double
Table. For hig her productivity applications, look no
fur ther than the Vulcan 2900 Double Table.
Offering all the same features, build, quality and
cutting power as the Vulcan 2900, the Vulcan 2900
Double Table provides the capability to work
concurrently on two tables. While completed pieces
are being removed from one table, cutting can
continue on the other table for hig her productivity
and faster job completion.
31
32
PLASMA CUTTING
MACHINES
Vulcan 3100D
The Vulcan 3100D is used in manufacturing
applications for cutting sheet metal up to 60" x 120"
and 1/2" thick. With its heavy-duty, welded-steel
construction, precision linear bearings and dual-side
rack-and-pinion g ear drive, you can look forward to
years of trouble-free operation and a maximum
return on your investment.
PLASMA CUTTING
MACHINES
Vulcan 1600 WaterJet
The Vulcan 1600 WJ is designed with traditional
Lo ckformer ® quality and re liability, to e liminate the
duct liner bottleneck in your shop while reducing the
labor associated with this process.
33
34
PRODUCT
SPECIFICATIONS
HVAC ROLLFORMING MACHINES
MODEL
CAPACITY
DEPTH OF POCKET/SIZE
SPEED
MOTOR
DRIVE
Gear
PITTSBURGH LOCK
MODEL 24
p. 02
24–28 gauge
Uses approximately
1" of material.
5/16"
Width of hammer-over
edge adjustable up to 3/8".
30–35 feet
per minute
AUTO-GUIDE POWER
FLANGING ATTACHMENT
For Models 20 & 24
p. 02
20 gauge or lighter
Makes flanges
approximately 7/32"
outside height.
16–18 feet
per minute
N/A
PITTSBURGH LOCK
MODEL 20
p. 03
20 –26 gauge
Uses approximately
1" of material.
5/16"
Width of hammer-over edge
adjustable up to 3/8". Extended
shafts for mounting auxiliary rolls.
25 feet
per minute
3/4 H.P., 115/230 volts,
V-belt
60 cycle, single phase, A.C.
1,800 RPM. Manual switch.
Other motors available upon request.
PITTSBURGH LOCK
MODEL 20
SUPER SPEED
p. 03
20–26 gauge
Uses approximately
1" of material.
5/16"
Width of hammer-over edge
adjustable up to 3/8". Extended
shafts for mounting auxiliary rolls.
75 feet
per minute
2 H.P., 230/460 volts,
V-belt
60 cycle, 3 phase, A.C.
1,800 RPM. Manual switch.
Other motors available upon request.
1/2"
Width of hammer-over edge
adjustable up to 3/8". Extended
shafts for mounting auxiliary rolls.
40–45 feet
per minute
PITTSBURGH LOCK
MODEL 14
p. 04
14–18 gauge
Uses approximately
1-3/8" of material.
PITTSBURGH LOCK
MODEL 16
p. 04
16 –20 gauge
Uses approximately
1-3/8" of material.
PITTSBURGH LOCK
MODEL 18
p. 04
18–22 gauge
Uses approximately
1-1/8" of material.
AUTO-GUIDE
FLANGER 16–18
p. 05
16 gauge maximum
Working range 16–24
1/2"
Width of hammer-over edge
adjustable up to 3/8". Extended
shafts for mounting auxiliary rolls.
35 feet
per minute
3/8"
Width of hammer-over edge
adjustable up to 3/8". Extended
shafts for mounting auxiliary rolls.
40–45 feet
per minute
Two flange heights available.
Specify 3/8" or 1/4".
18 feet
per minute
N/A
CAPACITY
1/3 H.P., 115/230 volts,
V-belt
60 cycle, single phase, A.C.
1,800 RPM. Manual switch.
Other motors available upon request.
5 H.P., 230/460 volts,
V-belt
60 cycle, 3 phase,
1,800 RPM. Manual switch.
Other motors available upon request.
3 H.P., 230/460 volts,
V-belt
60 cycle, 3 phase,
3,600 RPM. Manual switch.
Other motors available upon request.
2 H.P., 230/460 volts,
V-belt
60 cycle, 3 phase,
3,600 RPM. Manual switch.
Other motors available upon request.
3/4 H.P., 115/230 volts,
60 cycle, single phase,
1,800 RPM. Manual switch.
V-belt
N/A
N/A
N/A
DEPTH OF POCKET/SIZE
SPEED
MOTOR
DRIVE
20–26 gauge
Uses approximately
1-3/4" material.
60–65 feet per minute
Special speeds available
upon request.
BUTTON PUNCH
SNAP LOCK FLANGER
p.07
20 gauge maximum
Working range
20 -28 gauge.
7/16" flange
BUTTON PUNCH
CHEEK BENDER
p. 08
20 gauge maximum
Variable
OPTIONAL
N/A
FLOOR STAND
For Models 24 (not shown)
SNAP LOCK MACHINES
MODEL
24 GAUGE BUTTON
PUNCH SNAP LOCK
7-station (not shown)
p. 06
20 GAUGE BUTTON
PUNCH SNAP LOCK
9-station
p. 06
24–30 gauge
Uses approximately
1-9/16" material.
60–65 feet per minute
Special speeds available
upon request.
2 H.P., 230/460 volts,
60 cycle, 3 phase,
3,600 RPM. Manual switch.
Other motors available.
V-belt
18 feet
per minute
3/4 H.P., 115/230 volts,
60 cycle, single phase,
1,800 RPM. Manual switch.
V-belt
N/A
Variable
Hydraulic
3 H.P., 230/460 volts,
60 cycle, 3 phase,
3,600 RPM. Manual switch.
Other motors available.
V-belt
PRODUCT
SPECIFICATIONS
APPROXIMATE
SHIPPING WEIGHT
STAND
LUBRICATION
DIMENSIONS
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
N/A
14" long
10" wide
8-1/2" high
32 lbs.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
290 lbs.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
48" long
24" wide
42" high (when equipped with
Power Flanging Attachment)
Pass line 34"
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
650 lbs.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
58-1/2" long
24" wide
41" high
Pass line 34"
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
600 lbs.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
N/A
58-1/2" long
24" wide
41" high
Pass line 34"
24" long
24" wide
Pass line 34"
225 lbs.
Arc-welded steel.
Metallic-blue finish.
N/A
30-1/2" long
14-1/2" wide
25" high
37 lbs.
STAND
LUBRICATION
DIMENSIONS
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
725 lbs.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
58-1/2" long
24" wide
41" high
Pass line 34"
24" long
24" wide
Pass line 34"
250 lbs.
Arc-welded steel.
Metallic-blue finish.
Minimal
24" long
28" wide
Pass line 34"
200 lbs.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
N/A
Alemite fittings
for lubrication.
30" long
13-1/2" wide
20" high (when equipped with
Power Flanging Attachment)
140 lbs.
36" long
16 -1/2" wide
41" high
Pass line 32"
400 lbs.
58-1/2" long
24" wide
41" high
Pass line 34"
625 lbs.
58-1/2" long
24" wide
41" high
Pass line 34"
APPROXIMATE
SHIPPING WEIGHT
550 lbs.
CONSTRUCTION
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears
and needle bearings throughout.
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears
and needle bearings throughout.
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears
and needle bearings throughout.
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears
and needle bearings throughout.
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears
and needle bearings throughout.
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears
and needle bearings throughout.
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears
and needle bearings throughout.
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears
and needle bearings throughout.
Heavy-duty angle iron.
CONSTRUCTION
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears,
and needle bearings throughout.
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears,
and needle bearings throughout.
All-steel forming head, hardened
and ground shafts, case-hardened
steel forming rolls, machine cut gears,
and needle bearings throughout.
Hardened tool steel dies and head.
Heavy-duty angle-iron stand.
35
36
PRODUCT
SPECIFICATIONS
DUCT CONNECTOR MACHINES
MODEL
CAPACITY
DEPTH OF POCKET/SIZE
SPEED
MOTOR
DRIVE
TRIPLEX
CLEATFORMER
p. 10
22–28 gauge for
“S” cleat operation.
20–26 gauge for
drive cleat operation.
“S” cleat width 1-1/16"
Drive cleat width 1-1/8"
75 feet
per minute
V-belt
22–26 gauge
Uses approximately
1/2" Hem material.
60 feet
per minute
5 H.P., 230/460 volts,
60 cycle, 3 phase,
1,800 RPM. Manual switch
with across-the-line starter.
3 H.P., 230/460 volts,
60 cycle, 3 phase, 3,600
RPM.
V-belt
SUPER-ELEVEN
CLEATFORMER
(not shown)
22–26 gauge for
“S” cleat operation.
100 feet
per minute
20–26 gauge
1-1/8" pocket
Uses 6-1/4" material
stretch out inboard.
60–70 feet
per minute
5 H.P., 230/460 volts,
60 cycle, 3 phase, 1,800
RPM. Manual switch with
across-the-line starter.
V-belt
STANDING ”S”
CLEAT
p. 13
Standing “S”
cleat height 1/2"
Standing “S”
cleat width 1-1/16"
TRIPLEX 14
CONNECTOR
(not shown)
Variable
Variable
70 feet
per minute
V-belt
and chain
14 STATION
DS CONNECTOR
p. 14
Variable
Variable
70 feet
per minute
7.5 H.P., 230/460 volts,
60 cycle, 3 phase,
1,800 RPM.
Across-the-line starter.
7.5 H.P., 230/460 volts,
60 cycle, 3 phase,
1,800 RPM.
Across-the-line starter.
V-belt
and chain
MODEL
CAPACITY
DEPTH OF POCKET/SIZE
SPEED
MOTOR
DRIVE
TDC
p. 16
18–24 gauge for TDC
22 gauge for Clip
Uses approximately
1-7/8" TDC and
2-1/8" Clip material.
50 feet
per minute
7.5 H.P., 230/460 volts,
60 cycle, 3 phase,
1,800 RPM.
Chain
TDC
TRIPLEX
p. 17
18–24 gauge for TDC
22 gauge for Clip
1-7/8" TDC
2-1/8" Clip
60 feet
per minute
10 H.P., 230/460 volts,
60 cycle, 3 phase,
1,800 RPM.
V-belt
and chain
TDC
NOTCHER
p. 18
16 gauge
Mild steel 10 feet
1-1/2" for “V” notch
2-7/16" for TDC notch
N/A
Hydraulic
18–26 gauge
N/A
N/A
3 H.P., 230/460 volts,
60 Hz., 3 phase,
1,600 RPM.
110 volt, single phase,
60 cycle, Air = 90 PSI.
Chain
8900
CLEATFORMER
p. 09
DRIVE TURN
HEMMING
p. 12
TDC MACHINES
TDC V
p. 15
CORNER
CADET
p. 19
22–28 gauge for
“S” cleat operation.
18–24 gauge for TDC
22 gauge for Clip
POWER NOTCHING MACHINES
“S” cleat
width 1-1/16"
1-7/8" TDC
2-1/8" Clip
75 feet
per minute
60 feet
per minute
5 H.P., 230/460 volts,
60 cycle, 3 phase,
1,800 RPM.
Manual switch.
5 H.P., 230/460 volts,
60 cycle, 3 phase,
1,800 RPM.
Manual switch.
10 H.P., 230/460 volts,
60 cycle, 3 phase,
1,800 RPM.
V-belt
V-belt
Chain
MODEL
CAPACITY
DEPTH OF POCKET/SIZE
SPEED
MOTOR
DRIVE
RESIDENTIAL
NOTCHER
p. 21
20–28 gauge
N/A
N/A
1 H.P., 115/230 volts,
60 cycle, 1 phase,
3,600 RPM.
Hydraulic
SPEEDNOTCH
MODEL 16
p. 20
16–28 gauge
N/A
N/A
3 H.P., 230/460 volts,
60 cycle, 3 phase,
1,800 RPM.
Hydraulic
SNAP
PRODUCT
LOCK
SPECIFICATIONS
MACHINES
STAND
LUBRICATION
DIMENSIONS
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
60" long
24" wide
40" high
Pass line 32-1/2"
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
115" long
32" wide
48" high
Pass line 33"
STAND
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
LUBRICATION
Alemite fittings
for lubrication.
DIMENSIONS
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
144" long
36" wide
48" high
Pass line 33"
Welded tubular steel.
Metallic-blue finish.
Minimal
Arc-welded steel.
Heavy base plate.
Metallic-blue finish.
Manual
34.5" long
32" wide
49.5" high (top of handle)
Platform 48.5" x 48.5"
STAND
LUBRICATION
DIMENSIONS
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
N/A
122" long
24" wide
Pass line 45"
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
N/A
60" long
24" wide
40" high
Pass line 32-1/2"
APPROXIMATE
SHIPPING WEIGHT
800 lbs.
850 lbs.
30" long
60" wide
48" high
Pass line 34"
800 lbs.
84" long
30" wide
37" high
Pass line 33"
1,700 lbs.
67" long
24" wide
40" high
Pass line 32-1/2"
112" long
33" wide
38" high
Pass line 33"
136-1/4" long
38" wide
48" high
Pass line 33"
136-1/4" long
48" wide
48" high
Pass line 33"
122" long
24" wide
Pass line 45"
122" long
24" wide
Pass line 45"
950 lbs.
4,150 lbs.
(with 4 complete roll sets)
2,150 lbs.
(without roll sets)
APPROXIMATE
SHIPPING WEIGHT
3,000 lbs.
2,200 lbs.
6,000 lbs.
800 lbs.
240 lbs.
APPROXIMATE
SHIPPING WEIGHT
800 lbs.
750 lbs.
CONSTRUCTION
All-steel forming head, hardened and
ground shafts, case-hardened steel
forming rolls and machine cut gears. Roll
shafts 1" diameter inboard, 7/8" auxiliary.
All-steel forming head, hardened and
ground shafts, case-hardened steel
forming rolls and machine cut gears. Roll
shafts 1" diameter inboard, 7/8" auxiliary.
All-steel forming head, hardened and
ground shafts, case-hardened steel
forming rolls and machine cut gears. Roll
shafts 7/8".
All-steel forming head, hardened and
ground shafts, case-hardened steel
forming rolls and machine cut gears. Roll
shafts 1" diameter inboard, 7/8" auxiliary.
All-steel forming head, hardened and
ground shafts, case-hardened steel
forming rolls and machine cut gears.
Roll shafts 1-1/8".
All-steel forming head, hardened and
ground shafts, case-hardened steel
forming rolls and machine cut gears.
Roll shafts 1-1/8".
All-steel forming head, hardened and
ground shafts, case-hardened steel
forming rolls and machine cut gears.
Roll shafts 1-1/8".
CONSTRUCTION
All-steel forming head, hardened and
ground shafts, case-hardened steel
forming rolls and machine cut gears.
Roll shafts 1-1/4".
All-steel forming head, hardened and
ground shafts, case-hardened steel
forming rolls and machine cut gears.
Roll shafts 1-1/8".
All-steel forming head, hardened and
ground shafts, case-hardened steel
forming rolls and machine cut gears.
Roll shafts 1-1/4".
Solid cast-iron heads, hardened
tool steel punches and dies.
All-steel single piece machined
base plate, hardened crimping slides,
precision machined capture arms
and squaring brace.
CONSTRUCTION
N/A
N/A
37
38
PRODUCT
SPECIFICATIONS
ROUND/OVAL MACHINES
MODEL
CAPACITY
DEPTH OF POCKET/SIZE
SPEED
MOTOR
DRIVE
ROTO-NOTCHER
(not shown)
24–30 gauge
N/A
30 feet
per minute
3/4 H.P., 115 volts,
60 Hz., single phase.
V-belt
SPIN COLLAR MAKER
P. 23
24–30 gauge
4"–16" curling diameter
N/A
40 feet
per minute
3/4 H.P., 115 volts,
60 Hz., single phase,
1,725 RPM.
V-belt
ROUND/OVAL PIPE
MACHINE 24-30 GAUGE
7-station (Reeves Lock)
p. 24
24–30 gauge
Uses approximately
1-9/16" material
for both sides.
35 feet
per minute
V-belt
Pre-curl
24–30 gauge
Uses approximately
1-9/16" material
for both sides.
35 feet
per minute
2 H.P., 230/460 volts,
60 cycle, 3 phase, 3,600
RPM. Manual switch.
Other motors available.
AUTOMATED FURNACE
PIPE ROLLING SYSTEM
p. 25
Pre-curl
24–30 gauge
2' to 10' lengths
4" to 14" diameters
Variable
COLLAR MAKER
p. 22
ROUND/OVAL PIPE
MACHINE 24-30 GAUGE
9-station (Reeves Lock)
p. 24
24–30 gauge
ACCESSORY MACHINES AND TOOLS
N/A
30 feet
per minute
3/4 H.P., 115 volts,
60 Hz., single phase.
V-belt
2 H.P., 230/460 volts,
60 cycle, 3 phase, 3,600
RPM. Manual switch.
Other motors available.
V-belt
9.5 H.P., (6 motors),
230/460 volts,
60 cycle, 3 phase.
V-belt,
chain and
ball screw
MOTOR
DRIVE
N/A
Manual
MODEL
CAPACITY
DEPTH OF POCKET/SIZE
SPEED
CHEEK BENDER
p. 27
24 gauge
Adjustable plate for bends of
1/4" to 7/8" widths, 24" long
N/A
20 gauge galvanized
and lighter
1/4" flange
N/A
N/A
Manual
N/A
Rollformer speeds
limited to 65 feet
per minute on
pre-cut length
115 volts,
60 cycle, single phase,
Air = 100 PSI.
N/A
6016 BEADER
p. 26
EASY EDGER
p. 27
COLD SEALANT
SYSTEM
p. 28
Up to 5-foot-wide
material, 16
gauge maximum
N/A
1/8"
55 feet
per minute
30" bench model: 110 lbs.
1 H.P., 115/230 volts,
single phase,
60 cycle, A.C.
Chain
SNAP
PRODUCT
LOCK
SPECIFICATIONS
MACHINES
STAND
LUBRICATION
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
Welded tubular steel.
Metallic-blue finish.
Alemite fittings
for lubrication.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
STAND
Welded tubular steel.
Metallic-blue finish.
Alemite fittings
for lubrication.
DIMENSIONS
26" long,
23" wide
36" high
Pass line 33"
350 lbs.
CONSTRUCTION
All-steel forming head, hardened and ground
shafts case-hardened steel forming rolls, machine
cut gears, needle bearings throughout.
300 lbs.
All-steel forming head, hardened and ground
shafts case-hardened steel forming rolls, machine
cut gears, needle bearings throughout.
22-1/2" long
42" wide
37" high
Pass line 33"
400 lbs.
All-steel forming head, hardened and ground
shafts case-hardened steel forming rolls, machine
cut gears, needle bearings throughout.
48" long
24" wide
41" high
Pass line 34"
750 lbs.
All-steel forming head, hardened and ground
shafts case-hardened steel forming rolls, machine
gears, needle bearings throughout.
750 lbs.
All-steel forming head, hardened and ground
shafts case-hardened steel forming rolls, machine
cut gears, needle bearings throughout.
Alemite fittings
for lubrication.
48" long
24" wide
41" high
Pass line 34"
192" long
84" wide
48" high
Pass line 33"
5,400 lbs.
All-steel forming head, hardened and ground
shafts case-hardened steel forming rolls, machine
cut gears, needle bearings throughout.
LUBRICATION
DIMENSIONS
Arc-welded steel.
Heavy top plate.
Metallic-blue finish.
Alemite fittings
for lubrication.
Arc-welded steel.
N/A
Optional
N/A
N/A
N/A
20" long
23" wide
36" high
Pass line 33"
APPROXIMATE
SHIPPING WEIGHT
42-3/4" long
79-1/2" wide
Pass line 32-3/16"
24" long
4" wide
18" high (with stand)
N/A
APPROXIMATE
SHIPPING WEIGHT
1,650 lbs.
77 lbs.
30" floor model: 176 lbs.
23 lbs.
N/A
CONSTRUCTION
All-steel forming head, hardened and ground
shafts case-hardened steel forming rolls, machine
cut gears, needle bearings throughout.
All machined steel, heavy-duty construction.
All cast-iron, heavy-duty, hardened-steel form rolls.
N/A
39
40
PRODUCT
SPECIFICATIONS
PLASMA CUTTING MACHINES
MODEL
SOFTWARE
COMPUTER SYSTEM
POWER UNIT
PLASMA AMPERAGE
VULCAN 1000D
p. 29
Vulcan VSII
PCM Optional
Multi-tasking
586/Pentium ®
Power Max 1000
Optional Power Max 1250
20–60
Optional 85 AMP
VULCAN 2900
p. 30
Vulcan VSII
PCM Optional
Multi-tasking
586/Pentium ®
Power Max 1000
Optional Max 1250
20–60
Optional 100 AMP
VULCAN 2900
DOUBLE TABLE
p. 31
Vulcan VSII
PCM Optional
Multi-tasking
586/Pentium ®
Power Max 1000
Optional Max 1250
20–55
Optional 100 AMP
VULCAN 3100D
p. 32
Vulcan PCM
VSII Optional
Multi-tasking
586/Pentium ®
Hypertherm ® HPR 130
HyDefinition plasma source
Adjustable from
10 to 100 AMPS
VULCAN 1600
WATERJET
p. 33
Vulcan VSII
PCM Optional
Multi-tasking
586/Pentium ®
Ingersol Rand
0 to 50,000 PSI
N/A
SPECIAL ROLLFORMING MACHINES
Please contact your Lockformer ® representative.
PRODUCT
SPECIFICATIONS
CUTTING AREA
MAX. TABLE CAPACITY
SPEED
5' x 10' standard
Other motors available.
1,000 lbs.
2,000 IPM maximum
positioning speed
5' x 10' standard
Other motors available.
2,000 lbs.
1,000 IPM maximum
positioning speed
5' x 10' standard
Other motors available.
2,000 lbs.
1,000 IPM maximum
positioning speed
5' x 10' standard
Other motors available.
2,500 lbs.
1,000 IPM maximum
positioning speed
5' x 10' standard
Other motors available.
2,500 lbs.
1,000 IPM maximum
positioning speed
APPROXIMATE
DIMENSIONS
164" long
81" wide
58" high
APPROXIMATE
SHIPPING WEIGHT
2,700 lbs.
168" long
96" wide
63" high
3,200 lbs.
168" long
96" wide
63" high
4,000 lbs.
336" long
96" wide
63" high
168" long
96" wide
63" high
5,200 lbs.
4,500 lbs.
41
42
AUXILIARY
ROLLS
PITTSBURGH LOCK MODEL 20 AND MODEL 20 SUPER SPEED AUXILIARY ROLLS
ROLLS
CAPACITY
DOUBLE SEAM ROLLS (Type “S”)
22–28 gauge
DRIVE CLEAT ROLLS
STRAIGHT RIGHT-ANGLE FLANGE ROLLS
APPROX. MATERIAL USED
3/8" seam
20–26 gauge
2-1/8"
1-1/8" width
16–24 gauge
up to 7/16"
PITTSBURGH LOCK MODELS 14-16-18 AUXILIARY ROLLS
ROLLS
CAPACITY
PITTSBURGH ROLLS (no opening roll)
5/16" PITTSBURGH LOCK ROLLS
SIZE
1-1/8"
APPROX. MATERIAL USED
SIZE
1"
5/16" pocket
22–28 gauge
1"
5/16" pocket
DOUBLE SEAM ROLLS (Type “L”)
16–22 gauge
1-1/4"
7/16" seam
DOUBLE SEAM ROLLS (Type “S”)
22–28 gauge
1-1/8"
3/8" seam
DRIVE CLEAT ROLLS
20–26 gauge
2-1/8"
1-1/8" width
STANDING SEAM ROLLS
16–20 gauge
2-1/8"
3/4" height
STRAIGHT RIGHT-ANGLE FLANGE ROLLS
16–24 gauge
up to 7/16"
Right-Angle Flange
22–26 gauge
1/2"
1/2" height
Standing Seam
22–26 gauge
1-1/8"
5/8" seam
T-Connection
22–26 gauge
1-3/4"
5/8" seam
Right-Angle Flange
22–26 gauge
1-1/8"
5/8" seam
Standing Seam
22–26 gauge
1-3/4"
5/8" seam
HEMMING ROLLS (Teardrop)
20–24 gauge
1/4", 3/8" or 1/2"
COMBINATION 3-IN-1 ROLLS & 3-STEP GAUGE
SPECIAL 2-IN-1 ROLLS & 2-STEP GAUGE
20 gauge
up to 7/16" high
• Complete set of drive cleat rolls and slitting-cutting device
1/4", 3/8" or 1/2"
• Slitting-cutting device only with conversion parts for existing drive cleat rolls
20-24 GAUGE BUTTON PUNCH SNAP LOCK AUXILIARY ROLLS
ROLLS
CAPACITY
5/16" PITTSBURGH ROLLS
DRIVE CLEAT
up to 7/16" high
APPROX. MATERIAL USED
SIZE
2-1/8"
1-1/8" width
20–28 gauge
1"
5/16" pocket
DOUBLE SEAM ROLLS (Type “L”)
16–20 gauge
1-1/4"
7/16" seam
DOUBLE SEAM ROLLS (Type “S”)
22–28 gauge
1-1/8"
3/8" seam
RIGHT-ANGLE FLANGE
16–24 gauge
up to 7/16"
STANDING SEAM
18–20 gauge
2-1/8"
3/4" height
Right-Angle Flange
22–26 gauge
1/2"
1/2" height
Standing Seam
22–26 gauge
1-1/8"
5/8" seam
T-Connection
22–26 gauge
1-3/4"
5/8" seam
HEMMING ROLLS (Teardrop)
20–24 gauge
1/4", 3/8" or 1/2"
COMBINATION 3-IN-1 ROLLS
20–26 gauge
up to 7/16" high
1/4", 3/8" or 1/2"
AUXILIARY
ROLLS
ROLLS
CAPACITY
5/16" PITTSBURGH ROLLS
20–28 gauge
1"
5/16" pocket
DOUBLE SEAM ROLLS (Type “L”)
16–20 gauge
1-1/4"
7/16" seam
DOUBLE SEAM ROLLS (Type “S”)
22–28 gauge
1-1/8"
3/8" seam
RIGHT-ANGLE FLANGE
16–24 gauge
up to 7/16"
STANDING SEAM
18–20 gauge
2-1/8"
3/4" height
Right-Angle Flange
22–26 gauge
1/2"
1/2" height
Standing Seam
22–26 gauge
1-1/8"
5/8" seam
T-Connection
22–26 gauge
1-3/4"
5/8" seam
Right-Angle Flange
22–26 gauge
1-1/8"
5/8" seam
Standing Seam
22–26 gauge
1-3/4"
5/8" seam
SNAP LOCK WITH BUTTON PUNCH ROLLS (Male)
24–30 gauge
1-9/16"
5/8" pocket
SNAP LOCK WITH BUTTON PUNCH ROLLS (Female)
24–30 gauge
1-1/8"
1/2" pocket
HEMMING ROLLS (Teardrop)
20–24 gauge
1/4", 3/8" or 1/2"
1/4", 3/8" or 1/2"
BOOT CLIP ROLLS
26–30 gauge
2-1/8" or 2-1/4"
1" width
5/16" PITTSBURGH ROLLS (no opening roll)
20–28 gauge
1"
DRIVE CLEAT
COMBINATION 3-IN-1 ROLLS
SPECIAL 2-IN-1 ROLLS & 2-STEP GAUGE
•
•
•
•
20–26 gauge
APPROX. MATERIAL USED
2-1/8"
8900 Cleatformer: complete set of drive cleat rolls and slitting-cutting device
8900 Cleatformer: slitting-cutting device only with conversion parts for existing drive cleat rolls
8900 Cleatformer: “S” cleat cutter attachment
Triplex Cleatformer: combination “S” and drive cleat cutter attachment
SIZE
1-1/8" width
up to 7/16" high
5/16" pocket
43
44
L o c kf or m e r® D is t ri bu to rs
To view a complete list of our distributors,
please visit our web site at www.lockformer.com/dist.html
®
®
The Lockformer ® Company
711 Ogden Avenue
Lisle, Illinois 60532-1399
Phone: (630) 964-8000
Fax: (630) 964-5685
www.lockformer.com
Due to continuous improvements, Lockformer ® reserves the right to modify the product
design and specifications contained herein without notice. Please contact your Lockformer ®
sales representative for the most current specification information.
Use, publication or sale of any images or content without the expressed written consent of
Lockformer ® is strictly prohibited.
© Copyright 2008 . All rights reserved by Lockformer ®.