OBJ_DOKU-15498-002.fm Page 1 Friday, August 6, 2010 10:30 AM
WEU
Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
WEU
Isio
www.bosch-garden.com
F 016 L70 633 (2010.08) O / 163 WEU
de
en
fr
es
pt
it
nl
Originalbetriebsanleitung
Original instructions
Notice originale
Manual original
Manual original
Istruzioni originali
Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimat
OBJ_BUCH-904-002.book Page 3 Thursday, August 5, 2010 2:57 PM
3|
4
3
2
4
5
6
1
3
2
5
6
1
7
7
4
8
4
9
3
2
1
10
5
6
7
11
12
F 016 L70 633 | (5.8.10)
1
Bosch Power Tools
OBJ_BUCH-904-002.book Page 4 Thursday, August 5, 2010 2:57 PM
4|
A
B
13
14
4
10
2
11
12
C
8
D
9
F 016 L70 633 | (5.8.10)
Bosch Power Tools
OBJ_BUCH-904-002.book Page 5 Thursday, August 5, 2010 2:57 PM
5|
E
F
7
15
7
5
G
H
1
I
1
J
7
F 016 L70 633 | (5.8.10)
7
Bosch Power Tools
OBJ_BUCH-904-002.book Page 18 Thursday, August 5, 2010 2:57 PM
18 | English
Safety Notes
en
Explanation of symbols
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Wear eye protection and stout shoes
at all times while operating the machine.
Pay attention that bystanders are not
injured through foreign objects thrown
from the machine.
Keep bystanders a safe distance away
from the machine.
Do not use the machine in the rain or
leave it outdoors when it is raining.
Warning! The cutting means continues to move after the motor is
switched off.
Only use the battery charger indoors.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
F 016 L70 633 | (5.8.10)
c) Keep children and bystanders away
while operating a power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is
an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges and moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool
while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious personal injury.
Bosch Power Tools
OBJ_BUCH-904-002.book Page 19 Thursday, August 5, 2010 2:57 PM
English | 19
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose clothes, jewellery or long hair can
be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and
properly used. Use of dust collection can
reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
Bosch Power Tools
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and
are easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other battery packs may create a risk of injury
and fire.
F 016 L70 633 | (5.8.10)
OBJ_BUCH-904-002.book Page 20 Thursday, August 5, 2010 2:57 PM
20 | English
c) When battery pack is not in use, keep it
away from other metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make
a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that
the safety of the power tool is maintained.
Hedge trimmer safety warnings
f Keep all parts of the body away from the
cutter blade. Do not remove cut material
nor hold material to be cut when blades are
moving. Make sure the switch is off when
clearing jammed material. A moment of inattention while operating the hedge trimmer
may result in serious personal injury.
f Carry the hedge trimmer by the handle with
the cutter blade stopped. When transporting or storing the hedge trimmer always fit
the cutting device cover. Proper handling of
the hedge trimmer will reduce possible personal injury from the cutter blades.
f Hold power tool by insulated gripping surfaces only, because the cutter blade may
contact hidden wiring. Cutting blades contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give
the operator an electric shock.
f Keep cable away from cutting area. During
operation the cable may be hidden in shrubs
and can be accidentally cut by the blade.
F 016 L70 633 | (5.8.10)
Safety Warnings for Shrub/Grass
Shears
f This tool is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
f Never allow children or people unfamiliar
with these instructions to use the machine.
Local regulations may restrict the age of the
operator. When not in use store the machine
out of reach of children.
f The operator or user is responsible for accidents or hazards occurring to other people
or their property.
f Never operate the machine while people, especially children or pets, are nearby.
f Keep supply flexible cord away from cutting
means.
f Wear eye protection and stout shoes at all
times while operating the machine.
f Avoid trimming in bad weather conditions especially when there is a risk of lightening.
f Use the machine only in daylight or good artificial light.
f Check if guards and protective devices are
undamaged and properly mounted. Before
using, carry out possibly necessary maintenance and repairs.
f Switch on the motor only when the hands
and feet are away from the cutting means.
f Always disconnect the machine from the
power supply (i. e. remove the plug from the
mains or remove the disabling device):
– whenever you leave the machine,
– before clearing a blockage,
– before checking, cleaning or working on
the machine,
– after striking a foreign object. Inspect the
machine for damage and make repairs as
necessary,
– if the machine starts to vibrate abnormally (check immediately).
Bosch Power Tools
OBJ_BUCH-904-002.book Page 21 Thursday, August 5, 2010 2:57 PM
English | 21
f Take care against injury to feet and hands
from the cutting means.
f Keep the battery charger clean. Contamination can lead to danger of an electric shock.
f Before any work on the machine (e. g. maintenance, changing the tool, etc.) as well as
during its transport and storage, lock the
On/Off switch in the off position. There is
danger of injury when the On/Off switch is
unintentionally actuated.
f Before each use, check the battery charger.
If damage is detected, battery charger
should be changed to new one. Never open
the battery charger yourself. Have repairs
performed only by a qualified technician
and only using original spare parts. Damaged battery chargers, cables and plugs increase the risk of an electric shock.
Protect the power tool against heat,
e. g., against continuous intense sunlight, fire, water, and moisture. Danger of explosion.
f Do not open the battery. Danger of shortcircuiting.
f Do not short-circuit the battery. There is
danger of explosion.
f In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
f When the battery is defective, liquid can escape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Safety Warnings for battery chargers
Keep the battery charger away from
rain or moisture. Penetration of water
in the battery charger increases the
risk of an electric shock.
f Do not operate the battery charger on easily inflammable surfaces (e. g., paper, textiles, etc.) or surroundings. The heating of
the battery charger during the charging process can pose a fire hazard.
f Children should be supervised to ensure
that they do not play with the battery charger.
f Children or persons with mental or physical
limitations may only use the charger under
supervision or after having been instructed.
A thorough introduction reduces operating
errors and injuries.
Functional Description
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
f Only charge Bosch lithium ion batteries or
batteries installed in Bosch products with
the voltages listed in the technical data. Otherwise there is danger of fire and explosion.
While reading the operating instructions, unfold
the graphics page for the garden product and
leave it open.
f Recharge only with the charger specified by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack.
Intended Use
f Do not charge other batteries. The battery
charger is suitable only for charging Bosch
lithium ion batteries within the listed voltage
range. Otherwise there is danger of fire and
explosion.
Delivery Scope
f Do not charge non-rechargeable batteries.
There is a danger of explosion.
Bosch Power Tools
The garden product is intended for light trimming of shrubs and lawn edges in domestic use.
Carefully remove the garden product from its
packaging and check if the following parts are
complete:
– Shrub shear or grass shear
– Blade guard (fitted)
F 016 L70 633 | (5.8.10)
OBJ_BUCH-904-002.book Page 22 Thursday, August 5, 2010 2:57 PM
22 | English
– Battery Charger
– Pole cart (only with “grass shear & pole cart”
set)
– Grass shear blade (only with “shrub/grass
shear” set)
– Operating instructions
4 Battery charger
5 On/Off switch
6 Lock-off button for On/Off switch
7 SDS drive cover
8 Telescopic pipe
When parts are missing or damaged, please contact your dealer.
9 Adjusting collar
10 Handle connector
11 Wheels
12 Wheel cart
Product Features
13 Socket for charge plug
The numbering of the garden product features
refers to the illustration of the garden product
on the graphics page.
14 Plug connector for charger
15 SDS drive cover release button
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our accessories program.
1 Blade
2 Battery charge-control indicator
3 Handle
Technical Data
Isio
Grass Shear
mm
mm
Pole cart
Weight according to
EPTA-Procedure 01/2003
Shrub/Grass
Shear Set
–
z
z
80
–
80
80
–
z
–
z
–
115
–
115
–
–
z
–
0.5
0.6
1.2
0.6
z
Shrub shear blade
Blade length
Grass Shear
with Pole Cart
3 600 H33 002 3 600 H33 003 3 600 H33 002 3 600 H33 002
Article number
Grass shear blade
Blade width
Shrub Shear
kg
Battery
Li-Ion
Li-Ion
Li-Ion
Li-Ion
Rated voltage
V=
3.6
3.6
3.6
3.6
Capacity
Ah
1.3
1.3
1.3
1.3
h
3.5
3.5
3.5
3.5
1
1
1
1
50
50
35
50
Charging period (battery
discharged)
Number of battery cells
Run time per battery
charge (upto)
min
Please observe the article number on the type plate of your garden product. The trade names of the individual garden
products may vary.
F 016 L70 633 | (5.8.10)
Bosch Power Tools
OBJ_BUCH-904-002.book Page 23 Thursday, August 5, 2010 2:57 PM
English | 23
Isio
Grass Shear
Shrub Shear
Grass Shear
with Pole Cart
609
609
609
609
2
2
2
2
Shrub/Grass
Shear Set
Battery Charger
Article number
EU
EU
UK
UK
2 609 003 262
2 609 003 263
2 609 003 264
2 609 003 265
2
2
2
2
003
003
003
003
262
263
264
265
609
609
609
609
003
003
003
003
262
263
264
265
2
2
2
2
609
609
609
609
003
003
003
003
262
263
264
265
Input voltage
V~
230 (EU)
230 (EU)
230 (EU)
230 (EU)
V~ 220 – 230 (EU) 220 – 230 (EU) 220 – 230 (EU) 220 – 230 (EU)
V~
230 (UK)
230 (UK)
230 (UK)
230 (UK)
V~
230 (UK)
230 (UK)
230 (UK)
230 (UK)
Charging current
mA
400
400
400
400
Allowable charging temperature range
°C
0– 45
0– 45
0– 45
0– 45
kg
kg
kg
kg
0.2 (EU)
0.071 (EU)
0.25 (UK)
0.078 (UK)
0.2 (EU)
0.071 (EU)
0.25 (UK)
0.078 (UK)
0.2 (EU)
0.071 (EU)
0.25 (UK)
0.078 (UK)
0.2 (EU)
0.071 (EU)
0.25 (UK)
0.078 (UK)
Weight according to
EPTA-Procedure 01/2003
Please observe the article number on the type plate of your garden product. The trade names of the individual garden
products may vary.
Noise/Vibration Information
Grass Shear
Measured sound values determined according
to EN 60745.
Typically the A-weighted sound pressure level of
the product is less than 70 dB(A).
Vibration total values (triax vector sum) determined according to EN 60335:
Vibration emission value ah =2.5 m/s2,
Uncertainty K =1.5 m/s2.
Shrub Shear
Measured sound values determined according
to 2000/14/EC.
Typically the A-weighted noise levels of the
product are: Sound pressure level 69 dB(A);
sound power level 77 dB(A). Uncertainty
K =1.3 dB.
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value ah =2.5 m/s2, Uncertainty K =1.5 m/s2.
Bosch Power Tools
The vibration emission level given in this information sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level represents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times
when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
F 016 L70 633 | (5.8.10)
OBJ_BUCH-904-002.book Page 24 Thursday, August 5, 2010 2:57 PM
24 | English
Declaration of Conformity
Grass Shear
We declare under our sole responsibility that
the product described under “Technical data” is
in conformity with the following standards or
standardization documents: EN 60335 (battery
powered product) and EN 60335 (battery charger) according to the provisions of the directives
2006/95/EC, 2004/108/EC, 2006/42/EC.
Shrub Shear
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60745 (battery
powered product) and EN 60335 (battery charger) according to the provisions of the directives
2006/95/EC, 2004/108/EC, 2006/42/EC,
2000/14/EC.
2000/14/EC: Guaranteed sound power level
79 dB(A). Conformity assessment procedure according to Annex V.
Equipment category: 25
Technical file at:
Bosch Lawn and Garden Ltd., PT-LG/EAE,
Stowmarket, Suffolk IP14 1EY, England
07
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
22.07.2010
Assembly
For Your Safety
f Warning! Switch off before adjusting or
cleaning. The blades continue to move for a
few seconds after the garden product is
switched off.
Caution! Do not touch the moving blades.
Battery Charging (see figure A)
f Do not use other battery chargers. The supplied battery charger is designed for the Lithium-Ion battery in your garden product.
f Observe the mains voltage! The voltage of
the power supply must correspond with the
data given on the nameplate of the battery
charger. Battery chargers marked with 230 V
can also be operated with 220 V.
f The voltage range of the charger is
100–240 V. Ensure that the plug matchs the
outlet.
Note: The battery is supplied partially charged.
To ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time.
The lithium ion battery can be charged at any
time without reducing its service life. Interrupting the charging procedure does not damage the
battery.
The “Electronic Cell Protection (ECP)” protects
the lithium ion battery against deep discharging.
When the battery is run down or discharged, the
garden product is shut off by means of a protective circuit: The blade no longer moves.
Do not continue to press the
On/Off switch after the garden
product has been automatically switched off.
The battery can be damaged.
WARNING
Plug the mains plug of the battery charger into a
socket outlet and the charger plug 14 into the
socket 13 on the rear side of the handle, in one
way only.
The charging procedure starts as soon as the
charger plug 14 of the battery charger is inserted into the socket 13.
F 016 L70 633 | (5.8.10)
Bosch Power Tools
OBJ_BUCH-904-002.book Page 25 Thursday, August 5, 2010 2:57 PM
English | 25
The battery charge-control indicator 2 indicates
the charging progress. During the charging process, the indicator flashes green. When the battery charge-control indicator 2 lights up green
continuously, the battery is fully charged.
Operation
During the charging procedure, the handle of
the garden product warms up. This is normal.
Press the lock-off button 6 and hold while actuating the On/Off switch 5.
Disconnect the battery charger from the mains
supply when not using it for longer periods.
Release the lock-off button 6 again.
The garden product cannot be used during the
charge procedure; it is not defective when inoperative during the charging procedure.
f Protect the battery charger against moisture!
Pole cart (accessory or supplied with
“Grass Shear & Pole Cart”)
Initial Operation
Switching On
Switching Off
Release the On/Off switch 5.
Battery Charge-control Indication
The battery charge-control indicator 2 indicates
the charge condition of the battery for a few seconds when the On/Off switch 5 is pressed
through halfway of fully.
LED
Capacity
f The pole cart is designed only for use with
the grass shear at ground level.
Continuous lighting, green
≥35%
f Do not use the pole cart with the shrub
shear or above ground level.
Flashing light, green
15 – 35%
Flashing light, red
5 – 15%
Continuous lighting, red
≤5%
Removing Pole Cart (see figure B)
n Unplug the handle connector 10.
Working Advice
o To release the garden product from wheel
cart 12, pull the garden product in the direction shown.
f Hold the garden product away from yourself. Stand in a secure and stable position.
Fitting Pole Cart (grass shear only)
Align the grooves on the garden product with
fixing on the wheel cart 12.
Plug in the handle connector 10.
Adjusting Handle Length (see figure C)
n Loosen the adjustment collar 9.
o Pull the telescopic pipe 8 out to increase the
height, or push it in to decrease the height.
p Re-tighten adjustment collar 9.
Adjusting for Edging Mode (see figure D)
Turn the garden product 90 °, in either direction
to position the garden product in the vertical
edging mode.
Bosch Power Tools
f For more tips on cutting please refer to
website www.bosch-garden.com.
Anti Blocking
The garden product has a patented feature
which works as follows:
If the blade stalls on a tough material, the load
of the motor increases. The intelligent microelectronics senses this overload condition and
repeatedly reverses the motor, in order to prevent stalling and to cut the material through.
This audible reversing cut action continues for
up to 3 s.
After cutting through, the garden product continues in its normal mode, or in case the overload condition continues the blades automatically stop in the open position (e. g. in case a
piece of metal fence accidentally blocks the garden product).
F 016 L70 633 | (5.8.10)
OBJ_BUCH-904-002.book Page 26 Thursday, August 5, 2010 2:57 PM
26 | English
Cutting Hedges (shrub shear only)
Before cutting check the hedge for foreign objects e. g. wire fences.
Cut stems up to 8 mm in thickness. When cutting, move steadily along the line of cut, so that
stems are fed directly into the cutter blades.
The double edge of the cutting blade enables
cutting to either direction, or with a side to side
motion.
After use replace the blade transport guard.
Recommended times
– Cut hedges with deciduous leaves in June
and October.
– Cut evergreen hedges in April and August.
– Cut conifer and other fast growing shrubs approx. every six weeks from May onwards.
Edging (grass shear only) (see figure D)
Guide the garden product along the edge of the
lawn. Do not allow the blade to contact paved
surfaces, stones or garden walls, since this will
wear the blade rapidly.
For larger lawn it is advisable to use the pole
cart (available as an accessory or supplier with
“grass shear & pole cart” set).
Check if guards and protective devices are undamaged and properly mounted. Before using,
carry out possibly necessary maintenance and
repairs.
If the garden product should happen to fail despite the care taken in manufacture and testing,
repair should be carried out by an authorised customer service agent for Bosch garden products.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the garden
product.
Blade Maintenance
Always clean the cutting blades after operation
and lubricate with Bosch Maintenance spray.
During longer cutting jobs, we recommend periodically lubricating the cutting blade with Bosch
Maintenance spray.
Visually check the condition of the cutting edges
of the cutting blade.
Ensure that the cutting blade is covered with the
blade guard supplied when not in use.
Changing the Blade (see figures E – J)
Maintenance and Service
f Warning! Switch off before adjusting or
cleaning. The blades continue to move for a
few seconds after the garden product is
switched off.
Caution! Do not touch the moving blades.
Maintenance and Cleaning
f Always wear protective gloves when using,
adjusting or cleaning the garden product.
After use replace the blade transport guard.
f Warning! Switch off before adjusting or
cleaning. The blades continue to move for a
few seconds after the garden product is
switched off.
Caution! Do not touch the moving blades.
f For safe and proper working, always keep
the garden product clean.
f Always wear protective gloves when using,
adjusting or cleaning the garden product.
Note: To ensure long and reliable service, carry
out the following maintenance regularly.
Regularly check for obvious defects such as loose
fixings, and worn or damaged components.
F 016 L70 633 | (5.8.10)
f Do not do the blade change without blade
covers.
Blade Removal (see figures E–G)
E F Push the SDS drive cover release button
15 and slide the SDS drive cover 7 towards the
On/Off switch 5. Lift away from the housing.
G Lift the blade 1 out.
Blade Fitting (see figures H–J)
H Fit the blade 1 as shown aligning the holes in
the blade onto the drive pins and locate the
blade 1 under the retaining rib in the rear corner
of the housing.
Bosch Power Tools
OBJ_BUCH-904-002.book Page 27 Thursday, August 5, 2010 2:57 PM
English | 27
I When refitting the SDS drive cover 7 ensure
all 4 location legs are inside the housing prior to
sliding cover into place.
J Slide the SDS drive cover 7 back towards the
blade 1 to secure.
After Use/Storage
f Warning! Switch off before adjusting or
cleaning. The blades continue to move for a
few seconds after the garden product is
switched off.
Caution! Do not touch the moving blades.
f Always wear protective gloves when using,
adjusting or cleaning the garden product.
Clean the exterior of the garden product thoroughly using a soft brush and cloth. Do not use
water, solvents or polishes. Remove all debris.
Ensure that the cutting blade is covered with the
blade guard supplied when not in use.
Store the garden product in a secure, dry place
out of the reach of children. Do not place other
objects on top of the garden product.
Accessories
Grass shear blade . . . . . . . . . . . 2 609 002 039
Shrub shear blade . . . . . . . . . . . 2 609 002 040
Pole cart . . . . . . . . . . . . . . . . . . 2 609 002 041
Lubricant spray, 250 ml . . . . . . . 1 609 200 399
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-garden.com
Our customer service representatives can answer your questions concerning possible applications and adjustment of products and accessories.
Bosch Power Tools
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: bsctools@icon.co.za
F 016 L70 633 | (5.8.10)
OBJ_BUCH-904-002.book Page 28 Thursday, August 5, 2010 2:57 PM
28 | English
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: rbsa-hq.pts@za.bosch.com
Disposal
The garden product, accessories and packaging
should be sorted for environmental-friendly recycling.
Do not dispose of garden products, battery
chargers and batteries/rechargeable batteries
into household waste!
Batteries no longer suitable for use can be
directly returned at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
f Integrated batteries may only be removed
for disposal. Opening the housing shell can
damage or destroy the garden product.
When removing the battery from the garden
product, actuate the On/Off switch 5 until the
battery is completely discharged. Unscrew the
screw in the casing and take off the casing shell.
Disconnect the connections on the battery and
remove the battery.
Subject to change without notice.
Only for EC countries:
According to the European Guideline 2002/96/EC, electrical and
electronic equipments that are no
longer usable, and according to
the European Guideline
2006/66/EC, defective or used
battery packs/batteries, must be collected separately and disposed of in an environmentally
correct manner.
F 016 L70 633 | (5.8.10)
Bosch Power Tools