Siemens Gigaset DX600A ISDN Specifications

DX600 A ISDN
GIGASET. INSPIRING CONVERSATION.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / introduction.fm / 05.03.2010
Gigaset DX600A ISDN – your perfect companion
Gigaset DX600A ISDN – your perfect companion
... impressive inside and out. Go crazy for the vibrant 3.5" TFT display, first-class sound quality
and elegant exterior. Your Gigaset can do a lot more than just make calls:
Bluetooth, Ethernet, DECT and FAX connection
Connect your Gigaset to the Internet and your PC via Ethernet. Use your public and private
directories on the Internet (page 50). Update the directory on your Gigaset, the directory
from your Bluetooth mobile phone and your directory on the PC simultaneously.
Directory for up to 750 vCards – calendar and appointments
Save phone numbers and other data to the local directory (¢ page 45). Enter appointments
and birthdays in the calendar and set reminders (¢ page 75).
Use your Gigaset as a PABX
Register up to six handsets and a fax machine and use the three Gigaset answering machines.
Assign each device its own phone number (MSN).
It's easy to configure your Gigaset thanks to the wizards
These determine the MSNs for your ISDN connection (provider-specific) and assist you with
registering handsets and assigning send and receive MSNs to the desktop phone, handsets,
fax machine and integrated answering machine (¢ page 15).
Go online with your Gigaset
Use your phone's info centre and have information specifically provided for the phone shown
on the display (¢ page 62).
Do not disturb
Switch off the display backlight at night (¢ page 88), use time control for calls (¢ page 90)
or reject unknown calls (¢ page 90).
Other practical information
Transfer the directory from an existing Gigaset handset (¢ page 47), use the programmable
function keys (¢ page 86) for quick dial or to quickly access important functions, skip back
five seconds when listening to voicemail messages to repeat the last section (¢ page 65).
Protecting our environment
Gigaset Green Home – Be environmentally aware when using your phone. Details about our
ECO DECT products can be found at www.gigaset.com/customercare.
Version 4, 16.09.2005
Further information on your phone can be found at www.gigaset.com/gigasetDX600A.
After purchasing your Gigaset phone, please register it at www.gigaset.com/customercare –
this will ensure any questions you may have or warranty services you request are dealt with
even faster!
Have fun using your new phone!
1
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / overview.fm / 05.03.2010
Desktop phone overview
Desktop phone overview
1
Version 4, 16.09.2005
7
2
8 9 10 11
1 Adjust volume S = quieter; R = louder
during a call/message playback: Handsfree/
receiver volume;
When an external call is being signalled: Ringer
volume
2 Display
3 Display keys (programmable; page 25,
page 86)
In the menu: Open a menu for further functions
4 Message key (page 44)
Access to call and message lists;
Flashes: New message/call or new firmware
5 End/back key
End call, cancel function, go back one menu
level (press briefly), back to idle status (press
and hold)
6 Function keys (programmable
page 86)
7 Redial
Open redial list (page 42)
¢
2
12
3
13
14
4
15
5
6
16
8 Handsfree key
9 Mute key
During a call: Activate/deactivate microphone
10 * key
Activate/deactivate ringer (press and hold);
Text input: Special characters table;
11 Back key for answering machine
During playback: Back to the start of the message/previous message
12 Play back messages
Activate/deactivate message playback.
13 On/off key for answering machine
Activate/deactivate assigned answering
machine(s) (page 65)
14 # key
For text input: Switch between upper/lower
case letters and digits
15 Control key (page 24)
16 Microphone
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / overview.fm / 05.03.2010
Understanding the display icons
Understanding the display icons
Display in idle status (example)
· 06:30
Ã1 2 3
Desktop phone status
(two lines)
à 02
Mo Tu We Th
Current month/year
Time
Fr
Sa Su
Mar 2010
01 02 03 04 05 06 07
13:52
08 09 10 11 12 13 14
15 16 17 18 19 20 21
INT 1
Internal name
Appointment added to
the calendar (page 75)
22 23 24 25 26 27 28
Current date
29 30 31
Calls
Calendar
Status display in the headers: The following icons are displayed dependent on the settings
and the operating status of your desktop phone:
Ã
123
Ã02
¼
ò
ó
· 06:30
™ 10 Ë 09 n 08
Answering machine activated
1/ 2/ 3 numbers of the activated answering machines (orange=on)
Eco Mode+ activated (white),
Eco Mode+ and Eco mode activated (green) (page 74)
Bluetooth activated (page 82)
is replaced by ô, when a Bluetooth headset is connected, or by
õ when a Bluetooth data device is connected
Ringer deactivated (¢ page 90)
Replaced by ñ, when alert tone activated
Alarm switched on and wake-up time set (¢ page 77)
Number of new messages:
In the missed alarms list (page 77)
In the SMS list (page 57)
In the missed calls list (page 44)
On the network mailbox (page 73)
u
u
u
u
Signalling
Internal call (page 79)
Alarm (page 77)
Appointment (page 75)/anniversary (page 49)
Ø ÙÚ
Version 4, 16.09.2005
Answering machine is
recording (page 65)
External call (page 34)
ؼÚ
Øã Ú
ØÃ Ú
ØÜ
3
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Saturn_isdnIVZ.fm / 05.03.2010
Contents
Contents
Gigaset DX600A ISDN – your perfect companion . . . . . . . . . . . . . . . . . . . . 1
Desktop phone overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Understanding the display icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Following safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Taking the first steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Checking the package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the desktop phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Connecting the desktop phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Preparing to use the desktop phone: Installation wizard . . . . . . . . . . . . . . . . . . . . . . . 15
Proceeding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Operating the desktop phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Using the control key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the display keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using keys on the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Correcting incorrect entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Understanding the operating steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
25
25
25
26
27
Menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Making calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Making an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ending a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accepting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Calling Line Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating handsfree/open listening mode . . . . . . . . . . . . . . . . . . . . . .
Muting the desktop phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
33
34
34
35
36
Making calls using network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Configuring general settings for all calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring settings for the next call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configuring settings during an external call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using functions after a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37
39
39
41
Using lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Using the redial list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the incoming SMS message list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the answering machine list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Opening lists with the message key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42
42
43
43
44
Version 4, 16.09.2005
Using directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Using the local desktop phone directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Using online directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Using the private net directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
4
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Saturn_isdnIVZ.fm / 05.03.2010
Contents
Making cost-effective calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Linking a number with a call-by-call number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Displaying call duration/charges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Sending SMS (text messages) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Writing/sending SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving an SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending an SMS with vCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receiving notifications via SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting SMS service centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating first ringer muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating SMS function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting SMS problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
55
57
59
59
60
60
60
61
Info centre – continuous Internet access from your phone . . . . . . . . . . 62
Starting info centre, selecting info services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Registering for personalised info services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigating the info centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying information from the Internet as a screensaver . . . . . . . . . . . . . . . . . . . . .
62
63
63
64
Operating the desktop phone answering machine . . . . . . . . . . . . . . . . . 65
Operating via the desktop phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating call screening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the recording parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating when on the move (remote operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
65
70
70
71
Using the network mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Network mailbox: Entering numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Configuring the (network) mailbox for quick dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
ECO DECT: Reducing energy consumption and radiation . . . . . . . . . . . . 74
Setting an appointment (calendar) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Displaying missed appointments, anniversaries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Setting the alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Connecting/using other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Registering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deregistering handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locating a handset ("Paging") . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Making internal calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the name of an internal participant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the internal number of an internal participant . . . . . . . . . . . . . . . . . . . . . .
Using Bluetooth devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a fax machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
78
79
79
79
81
81
82
85
Version 4, 16.09.2005
Setting the desktop phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Quickly accessing functions and numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the handsfree/earpiece volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
86
87
87
88
5
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Saturn_isdnIVZ.fm / 05.03.2010
Contents
Setting ringers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating advisory tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating music on hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the resource directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
89
91
91
91
Configuring the system settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Setting the date and time manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protecting against unauthorised access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting your own area code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the desktop phone's IP address in LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting up/deleting ISDN phone numbers (MSNs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assigning send and receive connections to internal parties . . . . . . . . . . . . . . . . . . . .
Updating the phone firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating repeater support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating the DECT interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Activating/deactivating the FAX port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restoring the desktop phone to the default settings . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the desktop phone's MAC address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
92
93
93
93
95
96
96
97
97
98
98
98
Connecting the desktop phone to a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Saving an access code (outside line code) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Transferring a call – ECT (Explicit Call Transfer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Using Centrex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Selecting dialling mode/options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Customer Service & Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Questions and answers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Checking service information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Authorisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Protecting our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Caring for your telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Using insert strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Writing and editing text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Using Gigaset QuickSync – additional functions for the PC interface . . . . . . . . . . 107
Using Open Source software contained in the product . . . . . . . . . . . . . . . . . . . . . . . 108
GNU General Public License (GPL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
GNU Lesser General Public License (LGPL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Version 4, 16.09.2005
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
6
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / security.fm / 05.03.2010
Following safety precautions
Following safety precautions
Warning
Be sure to read this user guide and the safety precautions before using your telephone.
Explain their content and the potential hazards associated with using the telephone to your
children.
$
Use only the power adapter supplied, as indicated on the underside of the desktop
phone.
Use only the cables supplied for fax, ISDN, LAN and receiver connection and connect
these to the intended port only.
Using your telephone may affect nearby medical equipment. Be aware of the technical conditions in your particular environment e.g., doctor's surgery.
Do not install the phone in a bathroom or shower room. The phone is not splashproof.
Do not use your phone in environments with a potential explosion hazard (e.g., paint
shops).
ƒ
If you give your Gigaset to a third party, make sure you also give them the user guide.
Remove faulty telephones from use or have them repaired by our Service, as they
could interfere with other wireless services.
Please note
u Please note that only terminals that are operated in-house (inside buildings) may be con-
nected to ISDN connections.
u Not all functions described in this user guide are available in all countries and with all pro-
Version 4, 16.09.2005
viders.
7
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
Taking the first steps
Checking the package contents
1
5
3
2
7
8
4
9
6
1.
2.
3.
4.
5.
6.
7.
8.
9.
One desktop phone
One receiver to be connected to the desktop phone
One cable for connecting the receiver to the desktop phone
One power cable for connecting the desktop phone to the mains power supply
One telephone cable for connecting the desktop phone to the phone network
(8-pin with 2 mini western jacks 8/8)
One cable for connecting a fax machine to the desktop phone (6-pin with 2 mini
western jacks 6/6)
One Ethernet (LAN) cable (Cat 5 with 2 RJ45 modular jacks) for connecting the
desktop phone to a router (LAN/Internet) or PC
One quick user guide
One CD
Please note
Version 4, 16.09.2005
To change the display language, proceed as follows (¢ page 87):
¤ Press right on the control key v.
¤ Press the * # Q 3 # keys in succession.
¤ Press the bottom of the control key s repeatedly until the correct language
is highlighted. Then press the right display key.
8
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
Firmware updates
This user guide describes the functions of your desktop phone from firmware
version 30.00.
Whenever there are new or improved functions for your Gigaset, firmware
updates are made available for you to download to your desktop phone
(¢ page 96). If this results in operational changes to your desktop phone, a
new version of this user guide or the necessary amendments are published on
the Internet at www.gigaset.com.
Select the product to open the relevant product page for your desktop phone
where you will find a link to the user guide.
To find out what version of firmware is currently loaded (¢ page 104).
Installing the desktop phone
The desktop phone is designed for use in dry rooms in a temperature range of +5°C
to +45°C.
¤ Set up the desktop phone at a central point in the building.
Please note
If you wish to operate handsets from your desktop phone, consider the range of
the desktop phone. This is up to 300 m in unobstructed outdoor areas and up
to 50 m inside buildings. The range is reduced when eco mode is activated
(¢ page 74).
The phone's feet do not usually leave any marks on surfaces. However, due to the
multitude of different varnishes and polishes used on today's furnishings, the
occurrence of marks on the surfaces cannot be completely ruled out.
Warning
u Never expose the telephone to any of the following: Heat sources, direct sun-
light or other electrical appliances.
Version 4, 16.09.2005
u Protect your Gigaset from moisture, dust, corrosive liquids and fumes.
9
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
Connecting the desktop phone
The following diagram is an overview of all connections for your desktop phone.
The individual steps are described in detail below.
5
4
3
2
1
6
Version 4, 16.09.2005
Follow the steps in the order given below:
1. Connect the receiver to the desktop phone.
2. Connect the desktop phone to the telephone network (ISDN).
3. Connect the desktop phone to the mains power supply.
4. Connect the desktop phone to the router for accessing the Internet (via router
and modem or via router with integrated modem) and for configuring the desktop phone via the Web configurator.
5. Connect the desktop phone to a fax machine (¢ page 85).
6. Connect a wire-bound headset to the desktop phone.
10
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
1. Connecting the receiver to the desktop phone
Underside
of the desktop
phone
2
3
1
Version 4, 16.09.2005
1. Insert the jack, which can be found on the longer straight end of the connection
cable, into the connection port marked with the symbol ^ on the underside of
the desktop phone.
2. Place the straight part of the cable in the cable recess provided.
3. Insert the other jack on the connection cable into the port on the handset.
11
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
2. Connecting the desktop phone to the telephone network
3
1
Underside
of the desktop
2
phone
Version 4, 16.09.2005
1. Insert one end of the telephone cable (8-pin with 2 mini western jacks
8/8) from the rear into the recess in the housing.
2. Plug the telephone cable into the port marked with the symbol ] on the underside of the desktop phone.
3. Subsequently, connect the telephone cable to the ISDN network connection.
12
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
3. Connecting the desktop phone to the mains power supply
3
1
2
1. Insert the small jack on the power cable from the rear into the recess in the housing.
2. Plug the jack into the port marked with the symbol \ on the underside of the
desktop phone.
3. Then connect the power cable to the mains power supply.
Warning
u Keep the power adapter plugged in at all times for operation, as the desktop
phone does not work without a mains connection.
u Use only the power and telephone cable supplied.
You can now use your desktop phone to make calls and can be reached on your
main number!
Version 4, 16.09.2005
The answering machine on the desktop phone is set with a pre-recorded
announcement in answer and record mode (¢ page 65).
13
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
4. Connecting the desktop phone with a router (Internet) or PC
Your desktop phone features a LAN connection, via which you can connect the
desktop phone to a router or PC.
It is at your discretion as to whether to connect the desktop phone to a router and
thus the Internet. However, you will require this connection, if you wish to use the
following features with your desktop phone:
u You wish to be notified as soon as new software is available for your desktop
phone on the Internet.
u The date and time on your desktop phone should be updated by a time server
on the Internet.
u You want to use info services and/or online directories on your desktop phone.
The desktop phone will have to be connected to a PC, if you wish to use the following features with your desktop phone:
u You wish to set up the desktop phone using its Web configurator. Your PC will
also have to be connected to the router for this to work.
u You wish to use the additional PC software "Gigaset QuickSync over Ethernet"
to load images or tunes from your PC to your desktop phone.
For Internet access you need a router connected to the Internet via a modem (this
may be integrated in the router).
3
1
2
Version 4, 16.09.2005
1. Guide the end of the Ethernet cable provided (Cat 5 with 2 RJ45 modular jacks)
from the rear through the recess in the housing.
2. Plug the jack on the Ethernet cable into the LAN port on the underside of the
desktop phone.
3. Then insert the second Ethernet cable jack into a LAN port on the router or PC.
14
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
Preparing to use the desktop phone: Installation wizard
As soon as the desktop phone is connected, the installation wizard starts.
The wizard allows you to make all necessary settings for your desktop phone.
The following message appears in the display.
Setup - Welcome
?
Would you like help
setting up
your phone?
No
Yes
¤ Press the display key §Yes§ to start
installation.
Please note
Use only the installation wizard on the desktop phone, but not on a registered
handset.
Several individual wizards are combined to form part of the installation wizard.
The following individual wizards are included in the installation wizard:
1. ISDN wizard
2. Registration wizard
3. Connection wizard
Please note:
u If the installation wizard is activated, no other handset can access the Settings
menu on the desktop phone.
u To quit the installation wizard before the process is complete, press and hold the
end key T. All changes you have already saved using §OK§ are retained.
Version 4, 16.09.2005
u To skip a setting, press the bottom of the control key s or the display key §No§.
u To return to a previous setting, press the top of the control key t.
15
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
1. ISDN wizard: Assigning/entering the connection's MSNs
Several numbers (MSNs) were provided by the network provider when you
received your ISDN connection confirmation. You can save up to ten numbers
(MSNs) on your desktop phone. If there is no MSN entered on your desktop phone,
you can do the following with the ISDN wizard:
u Assign the MSNs for your connection i.e., call these up from the exchange (automatic MSN assignment) or enter these manually
Please note:
Not every ISDN provider supports automatic MSN assignment. If this feature is
not supported, then you must enter the MSNs for your connection manually
(¢ page 95).
u Set the receive MSN
u Set the send MSN
ISDN Wizard
?
Start ISDN
installation wizard?
No
Yes
¤ Press the display key §Yes§ to start
installation.
Ð
ISDN Wizard
This wizard helps you
detect and configure
your ISDN phone
numbers (MSNs).
Version 4, 16.09.2005
OK
16
¤ Press the display key §OK§ to start
automatic MSN assignment. This
process will take some time.
A corresponding message is shown
in the display.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
Ð
ISDN Wizard
MSN Assignment
MSN1: 12345601
After the MSNs have been successfully
assigned, a list containing the MSNs is
displayed.
MSN2: 12345602
MSN3: 12345603
MSN4: 12345604
Change
OK
¤ Press the display key §OK§ to close the
ISDN wizard.
The display shows:
ISDN installation complete..
Please note
u If MSNs cannot be assigned, you are requested to enter your MSNs manually
(¢ page 95).
u You can change the names of the MSNs (
¢ page 95).
2. Registration wizard
The registration wizard helps you register handsets to the desktop phone.
Please note
Registration
?
Register a
handset?
No
Yes
Press the left display key §No§, if you do
not wish to register any handsets. This
closes the registration wizard and the
connection wizard is started
(¢ page 18).
To register handsets on the desktop
phone at a later stage (¢ page 78).
¤ Press the display key §Yes§. The desktop phone changes to registration
mode.
¤ Start the registration within approx.
Registration
60 seconds on the handset
according to the handset's user
guide.
?
Please register
your handset
Info
Version 4, 16.09.2005
Cancel
Info
Press the display key §Info§ to display
information about registering handsets.
17
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
If the handset has been successfully registered on the desktop phone, you will see
the following display (approx. 3 seconds long):
Registration
‰
Handset registered
Once a Gigaset handset has been successfully registered, it will change to
idle mode. The handset's internal name
is shown on the display (INT 2, INT 3 to
INT 7).
Then "Register a handset?" is shown in the display again (see above).
¤ Press the display key §Yes§, if you wish to register another handset and carry out
the steps listed above with this additional handset.
Press §No§ to close the registration wizard and start the connection wizard.
Please note
u By default, the desktop phone is assigned the internal name INT 1 and the
internal number 1.
u The desktop phone assigns the lowest free internal number to the handset
(possible numbers: 2–7). The handset's internal name is shown in the display
e.g., INT 2. This means that the handset has been assigned the internal
number 2.
u The internal numbers and names of all registered handsets can be changed
(¢ page 78).
Version 4, 16.09.2005
3. Connection wizard
Using the connection wizard, you can assign the previously configured numbers
(ISDN MSNs, ¢ page 16) to internal parties (desktop phone, handsets and desktop
phone answering machines as well as any connected fax machine, ¢ page 85) as
send and receive connections, if necessary.
u Receive connections are numbers (MSNs) on which you can be called. You can
assign the MSNs for internal parties as the receive connection. Incoming calls are
only diverted to the terminals to which the relevant receive connection has
been assigned. Terminals are e.g., desktop phone, handsets or answering
machines or a connected fax machine.
u Send connections are the numbers (MSNs) that are sent to the called party.
The network provider calculates charges based on the send connections.
You can assign a fixed MSN as a send connection to each internal party.
u Every MSN can be both a send and receive connection. You can assign each MSN
to multiple handsets, the desktop phone and a connected fax machine as a send
and/or receive connection. It may only be assigned to an answering machine as
a receive connection.
18
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
After registration/getting started, the desktop phone, handsets and local answering machine 1 are assigned all MSNs as receive connections. The desktop phone
number (usually MSN1) is assigned to the devices as a send connection.
a.
Connection Wizard
?
¤ Press the display key §Yes§, if you
Assign connections
to desk phone
INT 1?
No
Yes
b.
Receive Connections
¤
Ð
The list of receive connections currently assigned is displayed.
Press the bottom of the control key s
to scroll through the complete list if
necessary.
x
¤ Press the display key §Change§, if you
INT 1
receives calls for
MSN1: 12345601
MSN2: 12345602
MSN3: 12345603
Change
wish to change the setting for the
desktop phone's send and receive
connections.
Press the display key §No§, if you do
not wish to change the setting for
the desktop phone.
OK
¤
wish to change the setting for the
receive connections on the desktop phone.
Press the display key §OK§, if you do
not wish to change the setting.
Press §OK§ to skip the following steps. Continue from
Press §Change§ to display the following:
c.
If you do not want incoming calls to
MSN1 indicated on the desktop
phone:
¤ Press right on the control key v to
set to No.
INT 1
Receive calls for
MSN1:
f Yes
g
Receive calls for
V
MSN2:
Version 4, 16.09.2005
Back
£ e.
Save
19
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
¤ Press down on the control key s
d.
INT 1
MSN1:
f No
g
¤
Receive calls for
MSN2:
f Yes
Back
to switch to the next MSN. Select
either Yes or No as described
above.
Repeat the steps for each MSN.
V
g
Save
¤ Press the display §Save§ once you
have finished configuring the settings for the desktop phone.
The updated list of receive connections is displayed one more time for you to
check.
Press the display key §OK§ to confirm the assignment.
e.
Ð
Send Connection
The send connection currently set for
the desktop phone is displayed.
INT 1
sends calls with
MSN1:
12345601
Change
OK
¤ Press the display key §OK§, if you do
¤
f.
INT 1
Connection for
outgoing calls
f MSN 1
Back
g
not wish to change the setting.
Skip the following step.
To change the setting, press the
display key §Change§.
If the desktop phone is to make calls
via a different MSN:
¤ Press the right of the control key
v repeatedly, until the MSN you
wish to use is displayed.
Save
¤ Press the display key §Save§ to save
Version 4, 16.09.2005
the settings.
20
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
If handsets are already registered to the desktop phone, you are requested to
assign send and receive connections for the handsets. The following is shown in the
display:
Assign connections
to handset
INT ...?
¤ Perform steps a. to f. for each registered handset.
Subsequently, you are requested to assign the receive connections to the three
answering machines on the desktop phone. "Assign connections to answering
machine ?" is shown in the display.
¤ Perform steps a. to d. for each answering machine.
Please note: Each MSN may only be assigned to one of the three local answering
machines as a receive connection.
After successfully configuring the settings, you will see the following displays in
quick succession:
Connection wizard complete:
Connection Wizard
‰
Installation wizard complete:
Setup
‰
Connection
Setup
assignment
complete
complete.
Version 4, 16.09.2005
Installation is complete.
21
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
Date & time
There are three methods of setting the date and time:
u By default, the date and time is transferred to your desktop phone from a time
server on the Internet as soon as the desktop phone is connected to the Internet.
You can activate/deactivate the synchronisation with a time server via the Web
configurator. Detailed information can be found in the Web configurator's user
guide on the enclosed CD.
u If synchronisation with the time server is unsuccessful (no connection to the
Internet/time server), the desktop phone assumes the date and time from the
ISDN network during the first outgoing external call.
u You can also set the date and time manually via the phone menu or one of the
registered handsets (¢ page 92).
Please note
Version 4, 16.09.2005
If the date and time have not been set, the time will flash in the desktop phone's
idle display (00:00) and §Time§ is displayed above the right display key.
To set the date and time manually, you must press the right display key §Time§
and enter the date and time (¢ page 92).
22
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Taking the first steps
Proceeding
Now you have successfully set up your desktop phone, you will certainly want to
adapt it to your personal requirements. Use the following guide to quickly locate
the most important subjects.
If you are unfamiliar with menu-driven devices such as other Gigaset telephones,
read the section entitled "Operating the desktop phone" ¢ page 24 first.
Information on ...
... is located here.
Making calls via ISDN
g
page 33
Setting the ringer and volume
g
page 89
Setting the earpiece volume
g
page 88
Setting Eco Mode
g
page 74
Preparing the desktop phone for SMS reception
g
page 55
Operating the desktop phone on a PABX
g
page 99
g
page 78
g
page 47
g
page 50
Registering existing Gigaset handsets to the
desktop phone
Transferring directory entries from existing
Gigaset handsets to the desktop phone
Using online directories
Version 4, 16.09.2005
If you have any questions about using your phone, please read the tips
on troubleshooting (¢ page 102) or contact our Service team
(¢ page 102).
23
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Operating the desktop phone
Operating the desktop phone
Using the control key
Below, the side of the control key that you must press in the
respective operating situation is marked in black (top, bottom,
right, left, centre) e.g., v for "press right on the control key"
or w for "press the centre of the control key".
The control key has a number of different functions:
In idle status
s
v
u
t
Open the local directory (press briefly).
Open list of online directories (press and hold).
Open the main menu.
Open the list of internal parties (handsets, desktop phone)
(press briefly).
Start a group call to all internal parties (press and hold).
Open the call list.
In the main menu, in submenus and lists
t/s
Scroll up/down line by line.
In input fields
Use the control key to move the cursor up t, down s, right v or left u. Press
and hold v or u to move the cursor word by word.
During an external call
s
u
t
Open the directory.
Initiate an internal consultation call.
Open call lists.
Functions when pressing the middle of the control key
Depending on the operating situation, the key has different functions.
u In idle status the key opens the main menu.
u In submenus, selection and input fields, the key takes on the function of the
display keys §OK§, §Yes§, §Save§, §Select§, §View§ or §Change§ .
Please note
Version 4, 16.09.2005
In these instructions, functions are explained using the right side of the control
key and the display keys. However, if you prefer, you can use the control key as
described above.
24
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Operating the desktop phone
Using the display keys
The functions of the display keys change depending on the particular operating situation. Example:
Back
OK
Current display key functions
Display keys
Some important display keys:
Options
Open a menu for further functions.
Confirm selection.
OK
Delete key: Delete character by character/word by word from right to
Û
left.
Back
Go back one menu level or cancel operation.
Save
Save entry.
Þ
Open the redial list.
You can set the functions of the keys in idle status individually (¢ page 86).
Using keys on the keypad
c / Q / * etc.
Press the matching key on the handset.
~
Enter digits or letters.
Correcting incorrect entries
Version 4, 16.09.2005
You can correct incorrect characters in the input fields by navigating to the incorrect entry using the control key. You can then:
u Delete the character to the left of the cursor with the display key Ñ (press and
hold to delete the word).
u Insert characters to the left of the cursor.
u Overwrite the highlighted (flashing) character e.g., when entering time and
date.
25
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Operating the desktop phone
Using the menus
Your desktop phone's functions are accessed using a menu that has a number of
levels.
Main menu (first menu level)
¤ When the handset is in idle status, press the right control key v to open the
main menu.
The main menu functions are shown in the display as icons. The selected function is marked by
an orange circle around the icon and the corresponding name is shown in the display header.
To access a function i.e., to open the corresponding submenu (next menu level):
¤ Use the control key p to select the required
function and press the display key §OK§.
Briefly press the display key §Back§ or the end key
T to revert to idle status.
Settings
Ç
Ê
Í
Back
ò
Ë
Î
É
Ì
Ï
OK
Submenus
The functions in the submenus are displayed as
Settings
lists (example on the right).
ISDN Wizard
To access a function:
¤ Scroll to a function using the control key q Date/Time
and then press §OK§ or the middle of the con- Audio Settings
trol key.
Display
Press the display key §Back§ or briefly press the
Language
x
end key T to return to the previous menu
Back
OK
level/cancel the operation.
If it is not possible to view all of the functions/
list entries at the same time on the display (list is too long), arrows appear on the
right-hand side of the screen. The arrows indicate the direction in which you need
to scroll to view the rest of the entries in the list (in the example: x to scroll down).
Version 4, 16.09.2005
Reverting to idle status
You can revert to idle status from anywhere in the menu as follows:
¤ Press and hold the end key T.
Or:
¤ Do not press any key: After 2 minutes the display will automatically revert to idle
status.
Settings that have not been saved by selecting the display keys §OK§, §Yes§, §Save§ or
§Change§ are lost.
An example of the display in idle status is shown on page 3.
26
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Operating the desktop phone
Understanding the operating steps
The operating steps are shown in abbreviated form.
Example:
The illustration:
v ¢ Ï Settings ¢ Audio Settings ¢ Music on hold (μ = on)
means:
¤ Press right on the control key v to
open the main menu.
Settings
Ç
Ê
Í
Back
ò
Ë
Î
É
Ì
¤ Press right, left, down and up on the
control key p to navigate to the
Settings submenu.
Ï
OK
¤ Press the display key §OK§ to confirm
your selection.
Settings
¤ Press down on the control key s
ISDN Wizard
until the Audio Settings menu item
appears on the display.
Date/Time
Audio Settings
Display
Language
Back
OK
¤ Press the display key §OK§ to confirm
Version 4, 16.09.2005
your selection.
27
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / starting.fm / 05.03.2010
Operating the desktop phone
Audio Settings
¤ Press down on the control key s
Call Volume
Ringer Settings
Advisory Tones
Music on hold
Back
³
until the Music on hold function
appears on the display.
Change
¤ Press the display key §Change§ to activate/deactivate the function.
Audio Settings
The change is effective immediately
and does not need to be confirmed.
Call Volume
Ringer Settings
Advisory Tones
Music on hold
Version 4, 16.09.2005
Back
28
´
Change
¤ Press the display key §Back§ to jump
back to the previous menu level.
Or
Press and hold the end key T to
return to idle status.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / menutree_Saturn-ISDN_dt.fm / 05.03.2010
Menu overview
Menu overview
With the desktop phone in idle status, press v (open main menu):
Ç
Select Services
Next Call
Withhold Number
Keypad Control
Call Divert
Internal Line
MSN1
¢ page 39
¢ page 39
¢ page 38
¢ page 37
MSN2
:
MSN10
¢ page 38
¢ page 37
¢ page 38
¢ page 38
¢ page 41
¢ page 82
Call Waiting
Withhold # All Calls
Busy on Busy
Transfer (ECT)
Ringback Off
ò
Bluetooth
Activation
Search for Headset
Search for Data Device
Known Devices
Own Device
É
Additional Features
Info Centre
Resource Directory
Screensavers
¢ page 62
¢ page 91
Caller Pictures
Sounds
Capacity
Ê
Call Lists
¢ page 42
All Calls
Outgoing Calls
Accepted Calls
Version 4, 16.09.2005
Missed Calls
29
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / menutree_Saturn-ISDN_dt.fm / 05.03.2010
Menu overview
Ë SMS
New SMS
Incoming
Draft
Settings
Service Centres
Service Centr.1
¢ page 55
¢ page 57
¢ page 56
¢ page 60
Service Centr.2
Service Centr.3
Service Centr.4
¢ page 59
¢ page 56
¢ page 65
¢ page 73
¢ page 67
Notification
Status Report
Ì Answering Machine
Play Messages
Network Mailbox
Answer Machine 1
Answer Machine 2
Answer Machine 3
Activation
¢ page 65
Answer Machine 1
Answer Machine 2
Answer Machine 3
Announcements
Record Announcemnt.
Answer Machine 1 to 3
Play Announcement
Answer Machine 1 to 3
Delete Announcemnt.
Answer Machine 1 to 3
Record Advisory Msg.
Answer Machine 1 to 3
Play Advisory Message
Answer Machine 1 to 3
Delete Advisory Msg.
Answer Machine 1 to 3
Recordings
Call Screening
Desktop Phone
¢ page 66
¢ page 69
¢ page 70
Handset
Network Mailbox
Set Key 1
Network Mailbox
Version 4, 16.09.2005
Answering Machine
30
¢ page 72
¢ page 72
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / menutree_Saturn-ISDN_dt.fm / 05.03.2010
Menu overview
Í
Organizer
¢ page 75
¢ page 77
¢ page 77
Calendar
Alarm Clock
Missed Alarms
Î
Contacts
Directory
Network Directory
Online Directory
Yellow Pages
= List of online directories
available with providerspecific names
Prv.NetDir
Ï
Settings
ISDN Wizard
Date/Time
Audio Settings
Call Volume
Ringer Settings
Volume
¢ page 45
¢ page 50
¢ page 50
¢ page 52
¢ page 95
¢ page 92
¢ page 88
¢ page 89
Melodies
Time Control
Anon. Call Silencing
Advisory Tones
Music on hold
Display
Screensaver
¢ page 91
¢ page 91
¢ page 87
Backlight
Language
Registration
Register Handset
Version 4, 16.09.2005
De-register Handset
¢ page 87
¢ page 78
¢ page 79
31
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / menutree_Saturn-ISDN_dt.fm / 05.03.2010
Menu overview
Telephony
Area Codes
Send Connections
INT 1 .... INT 8
Receive Connections
INT 1 .... INT 8
Answer Machine 1 ...
Answer Machine 3
Dialling Mode
Auto. Tone Dial
¢ page 93
¢ page 96
¢ page 96
¢ page 65
¢ page 100
Auto. Keypad
Dial of * and #
Access Code
System
Reset
DECT Interface
FAX Port
Repeater Mode
Local Network
Update Firmware
System PIN
Eco Mode
Eco Mode
Version 4, 16.09.2005
Eco Mode+
32
¢ page 99
¢ page 98
¢ page 97
¢ page 98
¢ page 97
¢ page 93
¢ page 96
¢ page 93
¢ page 74
¢ page 74
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / telephony.fm / 05.03.2010
Making calls
Making calls
If the display backlight is deactivated
(¢ page 88), it can be reactivated by pressing any key.
Making an external call
External calls are calls using the public telephone network and the Internet.
Prerequisite:
A specific send connection is assigned to the
desktop phone (¢ page 96).
~c
Enter the number and pick up
the receiver.
Or:
c~
pick up the receiver and then
enter the number.
Instead of picking up the receiver, you can
also press the handsfree key d or the
§Headset§ (¢ page 86) function/display key
to make a call using the handsfree function
or headset.
In this user guide, each of these variants is
indicated by "c Lift handset".
If "select line" is assigned to the desktop
phone instead of a send connection, the list
of configured connections (MSNs) is displayed once the receiver is picked up.
¤ Select line and press §OK§.
You can assign select line to a display or
function key (¢ page 86).
Version 4, 16.09.2005
§Select Line§
Press the display or function
key.
q
Select line.
~c
Enter the number and pick up
the receiver.
You can use the end key a to cancel the
dialling operation.
You are shown the duration of the call while
the call is in progress.
If the call costs are to be transferred, these
are displayed instead of the call duration.
Please note
u Dialling with the directory (page 45)
or call and redial list (page 42) saves
you from repeatedly keying in phone
numbers.
u If you have handsets registered to the
desktop phone, you can make internal calls free of charge (page 79).
Continuing a call on a headset
Bluetooth headset:
Prerequisite: Bluetooth is activated; a connection has been established between the
Bluetooth headset and the desktop phone
(¢ page 82).
¤ Press the talk key on the headset.
It may take up to 5 seconds to establish a
connection to the desktop phone.
Wire-bound headsets:
Prerequisite: The headset is connected to
the desktop phone (¢ page 10).
¤ Press the push-to-talk key on the headset.
For more information, see the headset's user
guide.
Please note
u If a wire-bound headset and a Blue-
tooth headset are connected to the
desktop phone at the same time, you
are unable to use the wire-bound
headset.
Ending a call
d
Replace the receiver or press the
end key T.
33
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / telephony.fm / 05.03.2010
Making calls
Accepting a call
An incoming call is indicated in three ways:
By ringing, by a display on the screen and by
the flashing handsfree key d.
Please note
Only calls to the receive connections
assigned to the desktop phone are signalled (¢ page 96). In particular:
u If a number has not been assigned to
the desktop phone, a handset or an
answering machine as a receive connection, calls to this number are signalled on all handsets.
If the number is only assigned to an
answering machine, calls will not be
signalled. Only the answering
machine can accept the call.
u If you have not assigned the receive
connections on your desktop phone,
all incoming calls are signalled on the
desktop phone and all handsets.
Version 4, 16.09.2005
Accept the call by:
¤ Picking up the receiver.
¤ Pressing the handsfree key d.
¤ Select §Options§ ¢ Divert to AM to divert
the call to the answering machine
(¢ page 69).
To deactivate the ringer, press the §Silence§
display key. You can accept the call as long as
it is displayed on the screen.
34
Accepting a call on a headset
Bluetooth headset:
Prerequisite: Bluetooth is activated; a connection has been established between the
Bluetooth headset and the handset
(¢ page 82).
¤ Press the talk key on the headset or the
function key Headset on the desktop
phone.
Only press the talk key on the headset
when the headset rings; this can take up to
5 seconds.
Wire-bound headsets:
Prerequisite: The headset is connected to
the desktop phone (¢ page 10).
¤ Press the push-to-talk key on the headset
or the function key Headset on the desktop phone.
You can program the function key on the
desktop phone manually (¢ page 86).
For further details about your headset, see
the accompanying user guide.
Using Calling Line
Identification
When you receive a call, the caller's number
and/or name is displayed on the screen if the
following conditions are met:
u Your network provider supports CLIP, CLI
and CNIP.
– CLI (Calling Line Identification): The
caller's number is transmitted.
– CLIP (Calling Line Identification Presentation): The caller's number is displayed.
– CNIP (Calling Name Identification
Presentation): The caller's name is displayed.
u You have requested CLIP or CNIP from
your network provider.
u The caller has requested CLI from the network provider.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / telephony.fm / 05.03.2010
Making calls
Call display
Display with CNIP
If the caller's number is saved in your directory, the caller's name is displayed. If you
have assigned a caller picture (¢ page 46)
to the caller, this is shown in the left-hand
section of the display.
If you have CNIP, then the name (town) that
is registered with your network provider for
the caller's number is displayed. If the
number of the caller is stored in your directory, the CNIP display is replaced by the corresponding directory entry.
You can use the display to decide which
receive connection (MSN) the call is directed
to.
ØÙÚ
Accept
ØÙÚ
1234567890
1
for MSN2
2
Silence
1 Number or name of caller
2 Receive connection: Indicates which of your
phone numbers (MSNs) the caller has dialled.
You specify the name when setting up the
MSNs (
page 95).
¢
The following is displayed in place of the
number:
u External, if no number is transmitted.
u Withheld, if the caller has withheld Calling Line Identification (page 37).
u Unavailable, if the caller has not
arranged Calling Line Identification.
1234567890
Anna Sand, London
1
2
for MSN2
Accept
Silence
1 Caller's number
2 Name and town/city
The display shows:
u External, if no number is transmitted.
u Withheld, if the caller has withheld Calling Line Identification (page 37).
Activating/deactivating
handsfree/open listening
mode
When in handsfree mode, you use the microphone and speaker on the desktop phone
rather than the receiver. For example, this
allows others to participate in the call.
When in open listening mode, you hold the
conversation via the receiver and also activate the speaker on the desktop phone
(earpiece and handsfree mode).
¤ Inform your caller before you use the
handsfree function so that the caller
knows a third party may be listening.
Activating/deactivating open
listening
Version 4, 16.09.2005
¤ Press the handsfree key d to activate/
deactivate open listening in earpiece
mode and when listening to the answering machine.
35
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / telephony.fm / 05.03.2010
Making calls
Activating handsfree mode while
dialling
~ d Enter the number and press the
handsfree key.
End the call:
T
Press end key.
Switching from earpiece to handsfree
mode
Prerequisite: You are making a call via the
receiver or via the receiver with open listening mode activated.
d& Press and hold the handsfree
key until you have put the
receiver down.
d
If the handsfree key does not
light up, press the key again.
Switching from handsfree to earpiece
mode
c
Lift handset. The speaker on the
desktop phone is deactivated.
Please note
Version 4, 16.09.2005
In handsfree mode, you can adjust the
speaker with the R and S keys.
36
Muting the desktop phone
You can deactivate the microphone on the
receiver and desktop phone during an external call (including during a conference call or
when call swapping). The other parties cannot hear you, but you can still hear them.
Prerequisite: You are conducting an external call.
Deactivating the microphone
P
Press the mute key. The display
shows Microphone is off.
Unmuting the microphone
P
Press the mute key again to
unmute the microphone.
If a second call (call waiting) is received in
mute mode, this is signalled acoustically as
usual. It is only shown on the display once
the microphone has been unmuted.
Please note
In mute mode, all keys on the desktop
phone are deactivated with the exception of the mute key P and the end
key T.
Use the end key T to end the call.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / netservices.fm / 05.03.2010
Making calls using network services
Making calls using
network services
Network services are functions that your
network provider makes available to you.
Please note:
u Some settings cannot be made simulta-
neously on the desktop phone and registered handsets. If this is the case, you will
hear a negative acknowledge tone.
u The abbreviations in brackets after the
titles indicate the ISDN feature concerned. Some features may only be used
if they have been authorised by the network provider (there may be an extra
charge).
¤ If you require assistance, please contact
your network provider.
Configuring general settings
for all calls
Anonymous calling – withholding
number
You can withhold your number (CLIR = Calling Line Identification Restriction). Your
phone number will not be displayed when
making outgoing calls. You are calling anonymously.
Prerequisite:
u For anonymous calls via your ISDN net-
work connection, you need to have
requested the relevant service (feature)
from your network provider.
Version 4, 16.09.2005
Activating/deactivating "withhold
number" for all calls
When this function is activated, the phone
number is withheld for all calls. The withhold
number function is activated for the desktop
phone and all registered handsets.
v ¢ Ç Select Services
Withhold # All Calls
Select and press §OK§ (μ = on).
To find out how to withhold the number for
a subsequent call (¢ page 39).
General call divert (CD)
A distinction is made between
u diverting calls internally and
u diverting calls to an external phone/connection
CD to an external connection
When diverting a call, the call is forwarded to
another external connection. Your call divert
settings can be specific to a particular connection (i.e., for every configured MSN for
the desktop phone).
v ¢ Ç Select Services ¢ Call Divert
A list containing the configured and activated receive connections (MSNs) for your
phone and Internal is displayed.
¤ Select the receive connection for which
you want to activate or deactivate call
divert, and press §OK§.
¤ You can enter data in the following fields:
Status
Activate/deactivate call divert.
When
Select All Calls / When Busy / No Answer.
All Calls: Calls are diverted immediately
i.e., calls for this MSN are no longer signalled on your desktop phone.
No Answer: Calls are diverted if no one
accepts the call within several rings.
When Busy: Calls are diverted when your
line is busy.
Phone Number
Press the display key §Change§. Enter
number to which calls are to be diverted,
and press §Save§. For every MSN, you can
specify a different fixed line, VoIP or
mobile phone number.
37
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / netservices.fm / 05.03.2010
Making calls using network services
Please note
Diverting calls to your phone numbers
can result in additional costs. Please consult your provider.
Internal call divert
You can divert all external calls intended for
a desktop phone receive connection to a
handset or device connected to the FAX
port.
v ¢ Ç Select Services ¢ Call Divert
Internal
Select and press §OK§.
¤ You can enter data in the following fields:
Status
Activate/deactivate call divert.
To handset
Select internal party.
Ring delay
If you prefer to have a delay before the
call is diverted, select the length of the
delay, (None, 10 sec., 20 sec. or 30 sec.).
If you select None, the call is not signalled
on the desktop phone and is diverted
immediately.
§Save§
Press the display key.
Internal call divert is only single-stage i.e., if
the calls are diverted to a handset that also
has call divert activated, this call divert is not
activated.
Version 4, 16.09.2005
Activating/deactivating call
waiting for external calls
If the function is activated, during an external call you will hear a call waiting tone to
signal that another external caller is trying to
get through. If you have CLIP, the number of
the waiting caller or the corresponding
directory entry is shown in the display. The
caller will hear the ringing tone.
When call waiting is deactivated, the caller
will hear the busy tone if you are already
making a call, you are the only party
assigned to this connection and this connection is not assigned to an answering
machine.
38
Activating/deactivating call waiting
v ¢ Ç Select Services ¢ Call Waiting
Status
Activate/deactivate.
¤ Press the display key §Save§.
Transferring a call – activating/
deactivating ECT (Explicit Call
Transfer) (ISDN)
When call swapping, you can connect two
external call participants (¢ page 40) to
each other by simply replacing the receiver.
The transfer of the call by replacing the
receiver is not supported by all ISDN
exchanges and PABXs.
You can activate/deactivate this function for
calls via your desktop phone.
v ¢ Ç Select Services
Transfer (ECT)
Select and press §OK§ (³ = on).
Setting up a busy signal for when
the MSN is being used (Busy on
Busy)
This setting allows callers to get a busy tone
immediately when an external call is already
being made on the MSN called, regardless
of the setting Call Waiting (¢ page 38).
Call waiting will not be signalled.
v ¢ Ç Select Services
Busy on Busy
Select and press §OK§ (³ = on).
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / netservices.fm / 05.03.2010
Making calls using network services
Configuring settings for the
next call
Configuring settings during
an external call
Activating/deactivating "withhold
number" for the next call
Initiating ringback when busy/no
answer
You can withhold your phone number for
the next call (CLIR = Calling Line Identification Restriction).
In idle status:
v ¢ Ç Select Services ¢ Next Call
¢ Withhold Number
Select and press §OK§.
~
Enter the number or copy from
the directory.
§Dial§
Press the display key or pick up
the receiver. The number is
dialled.
Generally, you can withhold your number for
all calls (¢ page 37).
If the person you are calling does not answer
or their line is busy, you can initiate ringback.
The ringback display key only appears on
the desktop phone if the exchange supports
this feature.
§Ringback§
Press the display key.
Wait for confirmation from the exchange.
& / T Replace the receiver or press the
end key.
Ringback when busy: The ringback will take
place as soon as the party in question terminates the current call.
Ringback when no answer: The ringback will
take place as soon as the party in question
has made a call.
Activating/deactivating the
keypad function for the next call
The keypad function allows you to control
certain features by entering sequences of
characters and digits. For keypad control
(¢ page 100).
You can temporarily activate keypad control
for the next call.
v ¢ Ç Select Services ¢ Next Call
¢ Keypad Control
Select and press §OK§.
~
Enter phone number.
§Dial§
Press the display key or pick up
the receiver. The number is
dialled.
Please note
u You can only activate one ringback at
a time. If you activate a second ringback, the first one is automatically
deleted.
u The ringback is initiated using the
desktop phone's send connection.
u The ringback can only be received on
the device that activated the ringback.
Accepting a waiting call
You are making an external call and hear the
call waiting tone.
§Accept§
Press the display key.
Version 4, 16.09.2005
Once you have accepted the waiting call,
you can switch between the two callers ("call
swap" ¢ page 40) or speak to both at the
same time ("conference" ¢ page 40).
39
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / netservices.fm / 05.03.2010
Making calls using network services
Please note
u Without CLIP, a waiting call is only
announced with a signal tone.
u An internal, waiting call is shown on
the display. You can neither accept
the internal call nor reject it.
u How to accept a waiting external call
during an internal call (¢ page 80).
Rejecting a waiting call
You can hear the call waiting tone but do not
want to speak to the caller.
§Reject§
Press the display key.
The caller hears the busy tone.
Consultation calls (external)
You can call a second external caller. The first
call is placed on hold.
During an external call:
§Ext.Call§
Press the display key.
The previous call is placed on
hold. The other participant
hears an announcement.
~
Enter the second participant's
telephone number.
The phone number is dialled. You are connected to the second participant.
If the caller does not answer, select the display key §End§ to return to the first participant.
Please note
You can also select the second participant's phone number from the directory
(page 49) or a call list (page 49).
Ending a consultation call
¢ End Active Call
You are reconnected to the first caller.
You can also end the consultation call by
replacing the receiver. The connection is
briefly interrupted and you will receive a call
back. As soon as the receiver is lifted, you are
reconnected to the first call participant.
Version 4, 16.09.2005
§Options§
40
Call swap
You can speak to both callers one at a time
(call swap).
Prerequisite: You are conducting an external call and have called a second participant
(consultation call) or have accepted a waiting call.
¤ Use q to swap between the participants.
The caller you are currently speaking to is
marked with the æ icon.
Ending the active call.
¢ End Active Call
You are re-connected to the waiting caller.
§Options§
Initiating a conference
You can speak to both participants simultaneously.
Prerequisite: You are conducting an external call and have called a second participant
(consultation call) or have accepted a waiting call.
¤ Pressing the display key §Conf.§.
You and the other two callers (both marked
by the æ icon) can hear and speak to each
other simultaneously.
Ending a conference
¤ Press the display key §EndConf§.
You return to "call swap" status. You are
reconnected to the caller with whom you
started the conference.
Or:
Prerequisite: ECT is not activated.
&
Replace the receiver to end the
call with both participants.
Each of the callers can end their participation in the conference call by pressing the
end call key and replacing the handset.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / netservices.fm / 05.03.2010
Making calls using network services
Transferring calls
Transferring a call to an internal party
You are making an external call and would
like to transfer it to another handset.
¤ Set up an internal consultation call
(page 80).
&
Replace the receiver (even
before the other party has
answered) to transfer the call.
Transferring a call to an external
number – ECT (Explicit Call Transfer)
You are making an external call and would
like to transfer it to another external party.
Prerequisites:
u The feature is supported by your network
provider.
u The ECT function has been enabled on
your Gigaset (¢ page 38).
¤ Set up an external consultation call
(page 40).
&
Replace the receiver (even
before the other party has
answered) to transfer the call.
Or
§Options§ ¢ Forward Call
Prerequisite: You are conducting an external call or the external call participant has
hung up; however, you are maintaining the
connection.
§Options§ ¢ Identify Caller
You can then continue the call or replace the
receiver.
Using functions after a call
Cancelling ringback
v ¢ Ç Select Services ¢ Ringback Off
If you have cancelled the ringback, a code is
sent.
¤ After confirmation from the telephone
network, press the end key T.
If the ringback was signalled before you
could cancel it, you can end it using §Cancel§.
Version 4, 16.09.2005
Identifying nuisance callers –
identify caller function
Identify caller is used to identify annoying or
threatening callers.
Prerequisite: You have requested the identify caller function from your network provider.
Activate this function during the call or
immediately after the caller has hung up.
You must not end the call yourself i.e., you
must not replace the receiver!
The caller is identified in the ISDN telephone
exchange and is recorded by phone number,
time and date. A printout of the list is then
sent by your network provider through the
post.
41
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / lists.fm / 05.03.2010
Using lists
Using lists
The options are:
u Redial list
u Incoming SMS message list
u Call lists
u Missed alarms list
u Answering machine list
Using the redial list
The redial list contains the 20 numbers last
dialled with the desktop phone (max. 32 digits). If one of the numbers appears in the
local or online directory, the corresponding
name is displayed.
Manual redial
Q
Press the key to open the redial
list.
s
Select entry.
c
Lift handset. The number is
dialled.
When a name is displayed, you can display
the corresponding phone number:
¤ Press the display key §View§ or the middle
of the control key.
If you have opened the redial list during a
call, you must press the display key §Dial§ to
dial the number selected.
Version 4, 16.09.2005
Automatic redial
In idle status:
Q
Press the key.
s
Select entry.
§Options§
Open menu.
Automatic Redial
Select and press §OK§.
Or: You try to call a number and hear the
busy tone or the party does not answer:
§Options§
Open menu.
42
Automatic Redial
Select and press §OK§.
The number is automatically dialled at fixed
intervals (at least every 20 seconds). The
handsfree key flashes and "open listening" is
activated.
u The party answers: Pick up the receiver
c or press the handsfree key d.
"Automatic redial" ends.
u Party does not answer: The call is terminated after approx. 30 seconds. After ten
unsuccessful attempts, "Automatic
redial" ends.
¤ To cancel automatic redial, press the display key §Off§ or any key.
Managing entries in the redial list
In idle status:
Q
Press the key briefly.
s
Select entry.
§Options§
Open menu.
The following functions can be selected
with q:
Copy to Directory
Copy an entry to the directory (page 45).
Automatic Redial
¢ "Automatic redial", page 42.
Display Number
(As in the directory, page 47)
Delete Entry
Delete selected entry.
(As in the directory, page 47)
Delete List
Delete complete list.
(As in the directory, page 47)
Using the incoming SMS
message list
All received SMS messages are saved in the
incoming message list (¢ page 58).
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / lists.fm / 05.03.2010
Using lists
Using the answering machine
list
You can use the answering machine list to
listen to the messages that are on the
answering machine (¢ page 67).
Using the call lists
Prerequisite: Calling Line Identification
Presentation (CLIP, page 34)
Your desktop phone stores various types of
calls:
u Accepted calls (from the user or the
answering machine)
u Outgoing calls
u Missed calls
You can view each type of call separately or
gain an overview of all calls. The last 30
entries are displayed in the lists of missed
and accepted calls. This list of outgoing calls
can contain up to 60 entries.
You can open the call lists by pressing up on
the control key t or via the menu:
v ¢ Ê ¢ All Calls / Outgoing Calls /
Accepted Calls / Missed Calls
Please note
Version 4, 16.09.2005
You can receive information on unknown
numbers free of charge via the reverse
search in the online directory (¢ page 50).
List entry
New messages are displayed at the top.
Example of list entries:
All Calls
™ Frank
for MSN2
10.10.08, 15:40
š 089563795
V
via MSN1
View
Options
u List type (in header)
u Status of entry
Bold: New entry
u Number or name of caller
u Name of MSN/connection to which
the missed/accepted call was directed
(for receive connection), or via which
the outgoing call was dialled (via send
connection)
u Date and time of call (if set).
u Type of entry:
– Accepted calls ( › )
– Missed calls ( ™ )
– Outgoing calls ( š )
– Calls recorded by the answering
machine (Ã)
Please note
Multiple calls from the same number are
stored once in the missed calls list (the
latest call). The number of calls from this
number is shown in brackets after the
entry.
One Withheld entry is created for all
missed calls for which the number of the
caller is withheld.
In addition, one Unavailable entry is created for every call for which the number
was not transferred.
Pick up the receiver or press the handsfree
key d to call the selected caller back.
43
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / lists.fm / 05.03.2010
Using lists
Select the §View§ display key to access additional information, including for example
the number linked to the name. If you have
CNIP, then the name and town that is registered with your network provider for this
number is displayed. If the name and town
are not shown, it means that the caller has
not requested Calling Line Identification or
the number has been withheld.
Use the §Options§ display key to select the following options:
Copy to Directory
Copy number to the directory.
Delete Entry
Delete selected entry.
Delete List
Delete all entries.
When you quit the call lists, all entries are set
to the status "old" i.e., the next time you call
up the list, they will no longer be shown in
bold.
Please note
In the case of each internal party (desktop phone, handset), only those
received/missed calls directed to its
receive connection are shown.
Opening lists with the
message key
Version 4, 16.09.2005
Use the message key f to open the following lists:
u Answering machine list or network mailbox, if your network provider supports
this function and quick dial is set for the
network mailbox (page 72).
u Incoming SMS message list (¢ page 58)
u Missed calls list
u Missed alarms list
44
An advisory tone sounds as soon as a new
entry appears on a list. The f key flashes
(it goes off when the key is pressed). In idle
status, the display shows an icon for the new
message:
Icon
New message...
Ã
... in the answering machine list
or on the network mailbox
™
... in the missed calls list
Ë
... in the SMS list
n
... in the Missed Alarms list:
The number of new entries is displayed to
the right of the corresponding icon.
Ã
123
Ã02
™ 10 Ë 09 n 08
Please note
If calls are saved in the network mailbox,
you will receive a message if the appropriate settings have been made (see your
network provider user guide).
After pressing the message key f, you
can see all lists containing messages and the
network mailbox list.
Lists containing new messages are at the top
of the list and are marked in a bold font.
Messages & Calls
Missed Calls:
Missed Alarms:
(3)
(1)
SMS:
V
Back
OK
Select a list with q. To open, press §OK§.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / directories.fm / 05.03.2010
Using directories
Using directories
The options are:
u (Local) directory (¢ page 45)
u Public online directory and classified
directory (¢ page 50)
u Private net directory
Using the local desktop
phone directory
You can save a total of 750 entries in the
directory.
Not only can you create a personalised directory for your desktop phone, but you can
send entries from it to handsets too
(page 47).
Saving number(s) in the directory –
new entry
s ¢ <New Entry>
¤ You can enter data in the following fields:
First Name: / Surname:
Enter first names and/or surnames.
If you do not enter a name in either of the
fields, the first phone number is saved in
the entry and displayed in place of a surname.
(To enter text and special characters,
¢ page 106.)
Phone (Home): / Phone (Office): /
Phone (Mobile):
Enter a number in at least one of the
fields.
When scrolling through the directory,
prefixed icons indicate which numbers
are contained in the entry:
Please note
You can assign numbers from the directory to the function/display keys for
quick access (quick dial) (page 86).
Directory entries
You can save the following information in a
directory entry:
u Name and surname
u Up to three numbers
u E-mail address
u Anniversary with reminder
u VIP ringer with VIP icon
u Caller picture
Open the directory in idle status or during an
external call with the s key (press briefly) or
via the menu
v ¢ Î ¢ Directory
Length of the entries
3 numbers:
Max. 32 digits each
Name and surname: Max. 16 characters each
Version 4, 16.09.2005
E-mail address:
Max. 60 characters
Ball, Tim
äk l Sand, Anna
Turner, Tom
Æ
Æ
ä denotes Phone (Home),
k denotes Phone (Office),
l denotes Phone (Mobile).
E-Mail:
Enter e-mail address.
Anniversary:
Select On or Off.
With setting On:
Enter Anniversary (Date) and Anniversary (Time) and select reminder type:
Anniversary (Signal) (¢ page 49).
Caller Melody (VIP):
Mark a directory entry as a VIP (Very
Important Person) by assigning a specific
ringer to it. VIP calls are recognised by the
ringer.
VIP entries are highlighted by the Æ
icon in the directory.
Prerequisite: Calling Line Identification
(page 34).
45
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / directories.fm / 05.03.2010
Using directories
Caller Picture:
If required, select a picture to be displayed when this person calls (see Using
the resource directory, page 91).
Prerequisite: Calling Line Identification
Presentation (CLIP).
§Save§
Press the display key.
Order of directory entries
Directory entries are generally sorted alphabetically by surname. Spaces and digits take
first priority. If only the first name was
entered in the directory, this is incorporated
into the sort order instead of the surname.
The sort order is as follows:
1. Space
2. Digits (0–9)
3. Letters (alphabetical)
4. Remaining characters (*, #, $ etc.)
To get round the alphabetical order of the
entries, insert a space or a digit in front of the
first letter of the surname. These entries will
then move to the beginning of the directory.
Dialling with the directory
s ¢ s (Select entry).
c
Lift receiver.
Or during a call:
§Dial§
Press the display key.
If the entry only contains one phone
number, this is the number that is dialled.
If the entry contains several numbers, the
icons for the numbers stored are displayed:
ä / k / l.
r
Select number.
§Dial§
Press the display key.
The number is dialled.
Please note
When dialling, you can link several numbers from the directory (e.g., a call-by-call
number to a telephone number,
¢ page 54).
Managing directory entries
Viewing entries
Searching for a directory entry
Version 4, 16.09.2005
s
Open the directory.
You have the following options:
u Use s to scroll through the entries until
the required name is selected.
Press s briefly to scroll on an entry-toentry basis.
Press and hold s to scroll through the
directory.
u Enter the first letters of the name (max. 8),
if necessary scroll to the entry with the s
key. The letters entered are displayed in
the bottom display line.
The directory searches for the surname. If a
surname has not been added, then it will
search for the first name.
To skip from any point in the list to the start
of the list (<New Entry>), press the end key
T briefly.
s
¢ s (Select entry).
§View§ / w
q
Press the display key or the middle of the control key. The entry
is displayed.
Scroll through the entry if necessary.
Using other functions
Prerequisite: The directory is opened while
the desktop phone is in idle status.
§Options§
Press the display key.
The following functions can be selected
with q:
Display Number
To edit or add to a saved number, or to
save it as a new entry; for the latter, press
the display key Ó after the number is
displayed.
Delete Entry
(Not during an external call)
Delete selected entry.
46
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / directories.fm / 05.03.2010
Using directories
Copy Entry
– to Internal: Send a single entry to a
handset (page 47).
– vCard via SMS: Send a single entry in
vCard format via SMS.
– vCard via Bluetooth: Send a single
entry in vCard format via Bluetooth.
Editing entries
s
¢ s (Select entry).
§View§ §Edit§
¤
Press the display keys one after
the other.
Perform changes and save.
Using other functions
Version 4, 16.09.2005
When the desktop phone is in idle status:
s ¢ s (Select entry)
¢ §Options§ (Open menu)
The following functions can be selected
with q:
Display Number
Edit or add to a saved number and then
dial with c or save as a new entry; for
the latter, press the display key Ó after
the number is displayed.
Edit Entry
Edit selected entry.
Delete Entry
Delete selected entry.
Copy Entry
to Internal: Send a single entry to a handset (page 47).
vCard via SMS: Send a single entry in
vCard format via SMS.
vCard via Bluetooth: Send a single entry
in vCard format via Bluetooth.
Delete List
Delete all entries in the directory.
Copy List
to Internal: Send the complete list to a
handset (page 47).
vCard via Bluetooth: Send the complete
list in vCard format via Bluetooth.
Available Memory
Display the number of entries that are still
available in the directory.
Exchanging directory/entries with
handsets
You can send entries from the local directory
or the complete local directory to handsets
as well as receive directory entries from the
handsets.
Please note:
u Entries with identical numbers are not
overwritten on the receiving handset.
u The transfer is cancelled when the desk-
top phone rings or the receiving memory
is full.
u Entered anniversary reminders, pictures
and sounds are not transferred.
Prerequisites:
u Receiving handset is registered to the
desktop phone.
u The handset can send and receive direc-
tory entries.
Sending the directory/directory
entries to a handset
s ¢ s (Select entry) ¢ §Options§ (Open
menu) ¢ Copy Entry / Copy List
¢ to Internal
s
Select the internal number of
the receiving handset and
press §OK§.
The transfer begins.
You can transfer several individual entries
one after the other by responding to the
Entry copied - Copy next entry? prompt
with §Yes§, selecting the entry and pressing
§Copy§.
A successful transfer is confirmed by a message and confirmation tone.
47
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / directories.fm / 05.03.2010
Using directories
Receiving a directory/directory entries
from a handset
Prerequisite: The desktop phone is in idle
status.
¤ Start the transfer of directory entries on
the handset as described in the handset
user guide.
If the data has been transferred successfully,
the display on the desktop phone will indicate the number of entries received (so far).
Transferring the directory/entries
as a vCard with Bluetooth
In Bluetooth mode (¢ page 82), you can
transfer directory entries in vCard format
e.g., to exchange entries with your mobile
phone or PC.
s ¢ s (select entry) ¢ §Options§ (open
menu) ¢ Copy Entry / Copy List
¢ vCard via Bluetooth
The list of "Known Devices" (¢ page 83) is
displayed and Bluetooth is activated, if necessary.
s
Select device and press §OK§.
Or:
<Search> Select and press §OK§ to search
for Bluetooth devices.
s
Select device and press §OK§.
~
If necessary, enter the PIN for
the Bluetooth device and
press §OK§.
The transfer starts.
Once an individual entry has been transferred, you can select an additional entry in
the directory and transfer it to the Bluetooth
device using §Copy§.
Please note
Version 4, 16.09.2005
In Bluetooth mode, incoming calls are
ignored.
48
Receiving a vCard with Bluetooth
If a device from the "Known Devices" list
(¢ page 83) sends a vCard to your desktop
phone, this occurs automatically. You are
informed about it via the display.
If the sending device does not appear in the
list, you are asked on the display to enter the
device PIN for the sending device:
~
If necessary, enter the PIN for
the sending Bluetooth device
and press §OK§.
The vCard transfer starts.
If the device should be added to the list of
known Bluetooth devices, press the display
key §Yes§ after the transfer. Pressing §No§
returns the desktop phone to idle status.
Copying the displayed number to
the directory
You can add numbers to the directory:
u From a list e.g., the call/answering
machine list, incoming SMS message list
or the redial list
u From the text of an SMS
u From a public online directory or classified directory
u From your private net directory
u When dialling a number
A number is displayed:
§Options§
¢ Copy to Directory
Or:
Ó
Press the display key.
The directory is opened. You can create a
new entry or extend an existing entry.
s
<New Entry> or select the
directory entry and press §OK§.
ä/ k / l
Select type of number and press
§OK§. The number is copied into
the corresponding field.
¤ If necessary, complete the entry
(¢ page 45).
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / directories.fm / 05.03.2010
Using directories
Please note
For a new entry:
u If you have CNIP, the first 16 characters
of the transmitted name are also copied to the Surname line.
u If you are copying a number from an
online directory, the surname or nickname (if available) are copied into the
Surname field.
u During the number transfer from the
answering machine list, the message
playback is interrupted.
Copying a number or e-mail
address from the directory
In some operating situations, you can open
the directory to copy a number or e-mail
address, for example. Your desktop phone
need not be in idle status.
¤ Depending on the operating situation,
open the directory with s or ö.
q
Select entry (page 46).
Saving an anniversary in the
directory
Version 4, 16.09.2005
For each number in the directory, you can
save an anniversary and specify a time at
which a reminder call should be made on
the anniversary (default setting: Anniversary: Off).
Anniversaries are automatically recorded in
the calendar (page 75).
s ¢ s (Select entry)
§View§ §Edit§ Press the display keys one after
the other.
s
Scroll to the Anniversary: line.
v
Select On. The following fields
are displayed.
¤ You can enter data in the following fields:
Anniversary (Date)
Enter day/month/year in 8-digit format.
Anniversary (Time)
Enter the hour/minute for the reminder
call in 4-digit format.
Anniversary (Signal)
Select the reminder type.
§Save§
Press the display key.
Please note
A time must be specified for reminder
calls. If you select a visual signal, a time is
not required and is automatically set to
00.00.
Deactivating anniversaries
s ¢ s (Select entry)
§View§ §Edit§ Press the display keys one after
the other.
s
Scroll to the Anniversary: line.
v
Select Off.
§Save§
Press the display key.
Anniversary reminder call
In idle status, a reminder call is shown in the
display of the handset (¢ page 3) and signalled with the selected ringer.
You can:
§SMS§
Write an SMS.
§Off§
Press the display key to
acknowledge and end the
reminder call.
When you are on the phone, a reminder call
is indicated on the handset with a single
advisory tone.
Anniversaries that are indicated during a call
and are not acknowledged are entered in
the Missed Alarms list (page 77).
49
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / directories.fm / 05.03.2010
Using directories
Using online directories
You can use public online directories
(= online directories and classified directories e.g., "Yellow Pages") depending on your
provider.
You can configure the online directories you
wish to use via the Web configurator.
Exclusion of liability
Gigaset Communications GmbH assumes
no guarantee or liability for the availability
of this service. The service may be discontinued at any time.
Opening an online/classified
directory
Prerequisite: The desktop phone is in idle
status.
s
Press and hold.
Or:
v ¢ Î Contacts ¢ Network Directory
This opens the list of online directories. Provider-specific names appear in the display.
q
Select directory (online directory or classified directory) from
the list and press §OK§.
This establishes a connection to the online
directory or the classified directory.
If there is only one online directory available,
a connection is immediately established by
pressing and holding down the control key.
Please note
Version 4, 16.09.2005
You can also establish a connection to
the online directory as follows:
¤ When the desktop phone is in idle status, dial 1#91 and then pick up the
receiver c.
¤ To establish a connection to the classified directory, dial 2#91.
Calls to the online directory are always
free of charge.
50
Searching for an entry
Prerequisite: You have opened the online
directory/classified directory.
¤ You can enter data in the following fields:
Surname: (online directory) or
Category/Name: (classified directory)
Enter the name, part of a
name or the business type
(max. 30 characters).
City:
Enter the name of the town/city
in which the party you are
searching for lives (max.
30 characters).
If you have already completed a
search, the last names of the
towns/cities you entered are
displayed (maximum of five).
You can enter a new name or
select one of the city names displayed using s and confirm
with §OK§.
Or:
Number: Enter the number
(max. 30 characters).
¤ Press the display key §Search§ or w to start
the search.
You must complete either the Surname: or
Category/Name: and City: fields or just the
Number. Searching by number is only possible if supported by the online directory you
have selected. For information on entering
text (¢ page 106).
A list of the towns/cities found is displayed if
the search returns more than one result:
q
Select the town/city.
If the name of a town/city is
longer than one line, it is abbreviated. Select §View§ to view the
complete name.
If no matching town/city is
found: Press §Back§ to change the
search criteria. The entries for
Category/Name and City are
copied and can be changed.
§Search§
Press the display key to continue the search.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / directories.fm / 05.03.2010
Using directories
A corresponding message will appear on the
display if no party is found to match the
search criteria. You have the following
options:
¤ Press the display key §New§ to start a new
search.
Or
¤ Press the display key §Change§ to change
the search criteria. The name and town/
city are copied over and can be changed.
No hits are displayed if the list of hits is too
large. A message to this effect is displayed.
¤ Press the display key §Refine§ to start a
more detailed search (¢ page 51).
Or
¤ Depending on the provider, you can view
the list if the number of hits is shown on
the display. Press the display key §View§.
Search result (hit list)
The search result is shown as a list on the display. Example:
Net Directory
2/50
Sand, Marie Elisabe...
1
2
0044123456789
11 Park Street
London, England
View
Options
Version 4, 16.09.2005
1. 2/50: Consecutive number/total number of
hits (only the consecutive number is displayed if the total number of hits >99).
2. Four lines including party's name, business
type, telephone number and address (possibly abbreviated). If a fixed line number is not
available, the mobile phone number (if available) is displayed.
You have the following options:
¤ You can scroll through the list with q.
¤ Press the display key §View§. Displays the
full details of the entry (name, business
type where applicable, address, telephone numbers). You can scroll through
the entry with q.
Use §Options§ to access the following options::
Refine search
Refine search criteria and restrict hit list
(¢ page 51).
New search
Start a new search.
Copy to Directory
Copy the number to the local directory.
A new individual entry is created in the
local directory for every number. The surname is transferred to the name field of
the local directory(¢ page 48).
Copy to Private NetDir.
Transfer the selected entry to the private
net directory. The private directory and
online directory must be provided by the
same provider.
Depending on your provider, you can add
a nickname to the entry in your private
directory.
Calling parties
Prerequisite: A hit list is displayed.
¤ Select entry and pick up receiver c.
If the entry only contains one phone
number, this is the one that is dialled.
A list of numbers appears if there is more
than one number.
¤ Using q, select number and press the
display key §Dial§.
Starting a refined search
You can use the search options available in
the refined search (first name and/or street)
to limit the number of hits returned by a previous search.
Prerequisite: A search result is displayed (hit
list with multiple entries or a message indicating too many hits).
§Refine§
Press the display key.
Or
§Options§ ¢ Refine search
Select and press §OK§.
51
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / directories.fm / 05.03.2010
Using directories
The search criteria from the previous search
are copied and entered in the corresponding
fields.
Surname: (online directory) or
Category/Name: (classified directory)
If necessary, change name/business type or extend partial
name.
City:
Name of the city/town from the
previous search is shown (cannot be changed).
Street:
If necessary, change the name
of the street (max. 30 chars.).
First Name: (only in the online directory)
If necessary, enter the first name
(max. 30 characters).
§Search§
Start detailed search.
Using the private net
directory
Version 4, 16.09.2005
Some providers offer users the option of creating and managing a private net directory/
directory on the Internet.
The advantage of an online directory is that
you can call up entries from any telephone
or PC e.g., from your VoIP phone in the office
or your PC at a hotel.
You can use the private net directory on your
desktop phone.
Prerequisites:
u You can create your private net directory
using your PC's Web browser.
u You can create and manage entries in the
online directory via your PC's Web
browser.
u Activate the online directory on your
desktop phone via the Web configurator.
It is particularly important that you store
the user name and password for accessing the private net directory in the desktop phone.
You can use the directory from every registered handset.
52
Opening the online directory
Prerequisite: The desktop phone is in idle
status.
s
Press and hold.
Or:
v ¢ Î Contacts ¢ Network Directory
This opens the list of (online) directories.
The provider-specific name is displayed for
the private net directory.
q
Select the private net directory
from the list and press §OK§.
Your private net directory is opened.
Please note
If there is no other online directory available apart from the private net directory:
¤ Press s briefly. The private net directory opens.
¤ Press and hold s. The desktop
phone local directory opens.
The entries in the online directory are sorted
alphabetically according to the first nonspace field in the entry. This is generally the
nickname or surname.
Selecting, viewing and editing
entries in the online directory
Prerequisite:
The online directory is open (see above).
¤ Scroll with s to the required entry.
Or:
Enter the first letter of the name and
scroll with s to the required entry.
¤ Press the display key §View§.
The detailed view with the complete entry
opens. You can scroll through the entry with
the control key q.
The following data is shown, if available (in
the specified sequence):
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / directories.fm / 05.03.2010
Using directories
Nickname, name, first name, phone number,
mobile phone number, VoIP number, street,
house number, post code, town/city, company name, business type, date of birth,
e-mail.
Using other functions
§Options§
Press the display key.
The following functions can be selected with
q:
Edit nickname
You can edit or delete the nickname in an
entry. Press §Save§ to save the change.
Copy to Directory
Copy an entry to the local directory
(¢ page 48).
Transferring the local directory to
the private net directory
You can save entries in the local directory in
vCard format as a vcf file on your PC with the
help of the Web configurator ( ¢ user guide
for the Web configurator on the enclosed
CD).
Several providers support functions on your
Web pages that you can use to copy these
files to the online directory.
Please note
You can copy numbers from a public
directory to your private net directory
(¢ page 51).
Calling up an entry in the online
directory
Version 4, 16.09.2005
Prerequisite: You have opened the online
directory.
q
Select entry (open the details
view, if necessary).
c
Lift handset.
If the entry only contains one phone
number, this is the one that is dialled.
If the entry contains more than one phone
number (e.g., mobile phone number and
phone number), they are offered to you for
selection.
q
Select the number to be dialled.
§Dial§
Press the display key.
The selected phone number is dialled.
53
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / charges.fm / 05.03.2010
Making cost-effective calls
Making cost-effective
calls
Make phone calls through a network provider who offers cheap rates (call-by-call)
or have the charges displayed after the call.
Linking a number with a
call-by-call number
Version 4, 16.09.2005
You can store the access codes (call-by-call
numbers) from network providers in the
directory (page 45).
To prefix a number with a call-by-call
number ("linking"), when the desktop phone
is in idle status:
s
Press briefly to open the local
directory.
s
Select entry (call-by-call
number).
§Options§
Press the display key.
Display Number
Select and press §OK§.
The call-by-call number is shown on the display.
~c
Enter the number and pick up
the receiver.
Or:
s
Press briefly again to copy the
number from the local directory.
q
Select entry (page 46).
q
If there are several numbers
stored in the entry:
Select and press §OK§.
c
Press the talk key. Both numbers
are dialled.
54
Displaying call duration/
charges
The duration of each call appears in the display for all external calls
u During the conversation
u Until approximately 3 seconds after
replacing the receiver.
Please note
The actual duration of the call can vary
from that shown by a few seconds.
For outgoing external calls, the call charges
are displayed instead of the call duration if
you have authorised your network providers
to transfer the charge information.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / sms_BRD_neutral.fm / 05.03.2010
Sending SMS (text messages)
Sending SMS
(text messages)
Your phone is delivered ready to send SMS
messages immediately.
Prerequisites:
u Calling Line Identification is enabled for
your phone line.
u Your network provider supports SMS on
the fixed line network (information on
this can be obtained from your network
provider).
u To receive SMS messages, you must be
registered with your SMS service provider. This occurs automatically when you
send your first SMS.
Please note:
u Every internal party (desktop phone, reg-
istered handsets) can only access SMS
(read/edit/delete) received or sent via
an MSN that has been assigned to the
party as a send or receive connection.
To assign MSNs to your handset, please
see page 96.
u If you wish to receive SMS messages via
several MSNs, you must register each
MSN separately with your service provider.
Writing/sending SMS
Writing an SMS
v ¢ ËSMS
New SMS
~
Select and press §OK§.
Write SMS.
Please note
u For instructions on entering text and
special characters, please see
page 106, .
u An SMS may contain up to 612 charac-
ters. If there are more than 160 characters, the SMS is sent as a linked SMS
(up to 4 SMS messages with 153 characters each). The top right of the display shows how many characters are
still available and which part of a
linked SMS is currently being written.
Sending an SMS
§Options§
Send
SMS
~/s
§Send§
Press the display key.
Select and press §OK§.
Select and press §OK§.
Select number with dialling
code (even if you are in that
area) from the directory or enter
directly. For sending SMS messages to an SMS mailbox: Add
the mailbox ID to the end of the
number.
Press the display key. The SMS is
sent.
Please note
Version 4, 16.09.2005
u If you are interrupted by an external
call while writing an SMS, the text is
automatically saved in the draft list.
u If the memory is full, or if the SMS
function is being used by a handset,
the operation is cancelled. An appropriate message appears in the display.
Delete SMS messages you no longer
require or send the SMS later.
55
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / sms_BRD_neutral.fm / 05.03.2010
Sending SMS (text messages)
Setting input language
Draft list
§Options§
You can save an SMS in the draft list, and edit
and send it later.
¤ You are writing an SMS.
Press the display key.
Select Language
Select and press §OK§. The current language is indicated by
a Ø.
s
Select input language and
press §Select§.
Please note
The draft list contains all of the saved
SMS messages for the assigned send
connection.
Saving an SMS in the draft list
SMS status report
Prerequisite: Your network provider supports this feature.
If you have activated the status report, you
will receive an SMS with a confirmation message after sending.
Activating/deactivating a status
report
v ¢ ËSMS ¢ Settings
Status Report
Select and press §Change§
(³ = on).
Reading/deleting status report/saving
number to directory
¤ Open the incoming message list
(page 58) and then:
Select SMS with State OK or
State not OK status.
§Read§
Press the display key.
u Delete:
§Options§ ¢ Delete Entry ¢ §OK§.
u Copy to directory:
§Options§ ¢ Copy to Directory ¢ §OK§.
u Delete entire list:
§Options§ ¢ Delete List ¢ §OK§.
Version 4, 16.09.2005
q
56
¤ You are writing an SMS (page 55).
§Options§
Save
Press the display key.
Select and press §OK§.
Opening the draft list
v ¢ Ë ¢ Draft
The first list entry is displayed e.g.,
Saved
on
10.01.10 15:07
If the entry has been saved with the phone
number i.e., when the SMS was saved from
the incoming list, the number is displayed in
the first line.
Reading or deleting SMS messages
¤ Open the draft list and then:
q
Select SMS.
§Read§
Press the display key. The text is
displayed. Scroll line by line
using q
Or delete the SMS with
§Options§ ¢ Delete Entry ¢ §OK§.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / sms_BRD_neutral.fm / 05.03.2010
Sending SMS (text messages)
Writing/changing an SMS
¤ You are reading an SMS in the draft list.
§Options§
Open menu.
You have the following options:
Send
Send stored SMS.
Edit
Edit the text of the saved SMS and then
send it (page 55).
Character Set
Display text in the selected character set.
Deleting the draft list
¤ Open the draft list and then:
§Options§
Open menu.
Delete List
Select, press §OK§ and confirm
with §Yes§. The list is deleted.
Sending SMS messages to an email address
Version 4, 16.09.2005
If your service provider supports the SMS as
e-mail feature, you can also send your SMS
messages to e-mail addresses.
The e-mail address must be at the beginning
of the text. You must send the SMS to your
SMS service centre's e-mail service.
v ¢ Ë SMS ¢ New SMS
s / ~ Transfer the e-mail address from
the directory or enter it manually. End the entry with a space
or colon (depending on the
service provider).
~
Enter the SMS text.
§Options§
Press the display key.
Send
Select and press §OK§.
E-mail
Select and press §OK§. If the
number of the e-mail service is
not entered (page 60), enter
the number of the e-mail service.
§Send§
Press the display key.
Sending SMS messages as a fax
You can also send an SMS to a fax machine.
Prerequisite: Your network provider supports this feature.
¤ You are writing an SMS (page 55).
§Options§
Press the display key.
Send
Select and press §OK§.
Fax
Select and press §OK§.
s/~
Select number from the directory or enter it manually. Enter
the number with area code
(even if you are in the same
area).
§Send§
Press the display key.
Receiving an SMS
All received SMS messages are saved in the
incoming list. Linked SMS messages are displayed as one message. If this is too long or
is not transferred completely, it is split into
individual messages. Since an SMS remains
in the list even after it has been read, regularly delete SMS messages from the list.
The display tells you if the SMS memory is
full.
Please note
You can only delete SMS messages that
have been sent to a receive connection
(MSN) assigned to your device (desktop
phone or handset). If the memory is
taken up by SMS messages that have
been sent to other MSNs, a notification
to this effect will appear on the display.
57
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / sms_BRD_neutral.fm / 05.03.2010
Sending SMS (text messages)
Incoming list
Deleting the incoming list
The incoming message list contains:
u All SMS messages with an MSN that
matches a send or receive connection on
your device (desktop phone or handset).
If no MSNs have been set up, all SMS messages received are shown on all handsets
and the desktop phone. The most recent
SMS appears at the top of the list.
u SMS messages that could not be sent due
to an error.
New SMS messages are indicated by the Ë
icon in the display, the f message key
flashing and an advisory tone sounding.
All new and old SMS messages in the list are
deleted.
¤ Open the incoming list.
§Options§
Open menu.
Delete List Select, press §OK§ and confirm
with §Yes§. The list is deleted.
Opening the incoming list with the
f key
f
Press.
The incoming list displays the number of
entries (example):
Reading or deleting SMS messages
¤ Open the incoming list, then:
q
Select SMS.
Press the display key. The text is
displayed. Scroll line by line
using q
Or delete the SMS with
§Options§ ¢ Delete Entry ¢ §OK§.
After you have read a new SMS, it is given the
status "Old" (is no longer shown in bold).
§Read§
Changing the character set
SMS:
(2)
Bold: New entries
Normal font: Old entries
¤ Open list with §OK§.
¤ Read SMS
§Options§
Press the display key.
Character Set
Text is shown in the selected character
set.
Every entry in the list contains:
u The number or name of the sender
u The receive connection to which the SMS
is addressed
u The date of receipt
Example:
0123727859362922
for MSN2
10.10.08 09:07
Version 4, 16.09.2005
Opening the incoming list via the SMS
menu
v ¢ ËSMS ¢ Incoming
58
Replying to or forwarding SMS
messages
¤ Read SMS
§Options§
Press the display key.
You have the following options:
Reply
Write and send a new SMS to the sender
(page 55).
Edit
Edit the text in the SMS and return it to
the sender (page 55).
Forward
Forward the SMS to another number
(page 55).
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / sms_BRD_neutral.fm / 05.03.2010
Sending SMS (text messages)
Copying the number to the
directory
Copying the sender's number
¤ Open the incoming list and select the
SMS (page 58).
§Options§ ¢ Copy to Directory
¤ Complete the entry (¢ page 45).
Please note
An attached mailbox identifier is added
to the directory.
Copying/dialling numbers from an
SMS
¤ Read the SMS and scroll to the telephone
¤ Read the SMS containing the vCard.
§View§
q
Press the display key.
To return to the body of the
SMS, press §Back§.
Select number.
§Save§
Press the display key.
When you save a number, the directory is
opened automatically. The number and
name are copied. If a birthday is entered on
the vCard, the date is copied to the directory
as an anniversary.
¤ If necessary, edit the entry in the directory and save it. You will return to the
vCard automatically.
number.
The digits are highlighted.
Ó
Press the display key.
Complete the entry (¢ page 45).
Or:
c
Press the talk key to dial the
number.
If you wish to use the number to send an
SMS:
¤ Save the number with the local area code
(dialling code) in the directory.
Receiving notifications via
SMS
Sending an SMS with vCard
v ¢ ËSMS ¢ Settings ¢ Notification
¤ You can enter data in the following fields:
To:
Enter the number to which the SMS is to
be sent.
For missed calls:
Select On if you require SMS notification.
Msg. on Answer M.:
Select On if you require SMS notification.
§Save§
Press the display key.
The vCard is an electronic business card. It is
indicated by the Å icon in the body of the
SMS.
A vCard can include:
u Name
u Private number
u Business number
u Mobile phone number
u Birthday
Individual entries in a vCard can be saved to
the directory one after the other.
Version 4, 16.09.2005
Opening the vCard
You can receive notification of missed calls
or new messages on the answering
machine.
Prerequisite: The caller's number (CLI) must
have been transmitted in the missed call.
Notification is sent to your mobile phone or
another phone with SMS functionality.
You only need to save the telephone
number to which you wish the notification
to be sent.
Warning
Do not enter your own network number
for the notification of missed calls. This
can lead to chargeable endless looping.
59
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / sms_BRD_neutral.fm / 05.03.2010
Sending SMS (text messages)
Setting SMS service centre
SMS messages are exchanged between SMS
service centres operated by service providers. You must enter the SMS service centre
through which you wish to send and receive
SMS messages into your phone. You can
receive SMS messages from every SMS service centre that is entered, provided you have
registered with your service provider.
Your SMS messages are sent via the SMS
service centre that is entered as the active
send service centre. However, you can activate any other SMS service centre as the
active send service centre to send a message
(page 60).
If no SMS service centre is entered, the SMS
menu only consists of the entry Settings.
Enter an SMS service centre (page 60).
Entering/changing SMS service
centres
¤ Find out about the services and special
functions offered by your service provider before you make a new application and/or before you delete pre-configured numbers.
v ¢ Ë SMS ¢ Settings
¢ Service Centres
s
Select SMS service centre
(e.g., Service Centr. 1) and
press §OK§.
¤ You can enter data in the following fields:
Active Send:
Select Yes if SMS should be sent via the
SMS service centre. For the SMS service
centres 2 to 4, the setting only applies to
the next SMS.
SMS Service Centre no.:
Enter the number of the SMS service centre.
Version 4, 16.09.2005
E-mail Service no.:
Enter the number of the e-mail service.
60
Send via:
Specify connection (MSN), via which SMS
messages should be sent.
§Save§
Press the display key.
Sending an SMS via another SMS
service centre
¤ Activate SMS service centre 2, 3 or 4 as
the active send service centre.
¤ Send the SMS.
This setting only applies to the next SMS to
be sent. After that, the setting returns to
Service Centr. 1.
Activating/deactivating first
ringer muting
v
Open the main menu.
*#Q5# O
Press keys.
Make the first ring audible.
Q §OK§
Or:
§OK§
Mute the first ring.
Activating/deactivating SMS
function
If you deactivate the SMS function, you cannot send or receive any SMS messages with
your phone.
The settings you have made for sending and
receiving SMS messages (e.g., the numbers
of the SMS service centres) and the entries in
the incoming and draft lists are saved even
after deactivation.
v
Open the main menu.
*#Q5# 2 L
Enter the digits.
Deactivate the SMS function.
Q §OK§
Or:
§OK§
Activate the SMS function
(default setting).
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / sms_BRD_neutral.fm / 05.03.2010
Sending SMS (text messages)
Troubleshooting SMS
problems
Error codes when sending
E0 Calling Line Identification permanently
restricted (CLIR) or Calling Line Identification
not activated.
FE Error occurred during SMS transfer.
FD Connection to SMS service centre failed; see
self-help.
Self-help with errors
The following table lists problem situations
and possible causes and provides advice on
troubleshooting.
You cannot send messages.
1. You have not requested the CLIP service
(Calling Line Identification Presentation).
Ask your service provider to enable this
service.
¥
2. SMS transmission has been interrupted (e.g.,
by a call).
Re-send the SMS.
¥
3. The network provider does not support this
feature.
4. No number or an invalid number is entered for
the SMS service centre set as the active send
service centre.
Enter the number (page 60).
¥
You have stopped receiving SMS messages.
Call divert is activated for All Calls or call divert
is activated for All Calls for the network mailbox.
Change the call divert settings
(
page 37).
¥
¢
The SMS is played back.
1. The "display call number" feature is not activated.
Ask your service provider to activate this
function (chargeable).
¥
2. No agreement is in place between your
mobile phone operator and your fixed line
network SMS service provider.
Obtain information from your fixed line
network SMS service provider.
¥
3. Your terminal has been recorded by your SMS
provider as having no fixed line network SMS
functionality i.e., you are not registered with
the provider.
Send any SMS to automatically register
your desktop phone to receive SMS.
¥
Messages are only received during the day.
The terminal is recorded in your SMS provider's database as having no fixed line network SMS functionality i.e., you are not registered with the provider.
Obtain information from your fixed line
network SMS service provider.
Send any SMS to automatically register
your desktop phone to receive SMS.
¥
¥
You receive an incomplete SMS.
¥
1. Your desktop phone's memory is full.
Delete old SMS messages (page 56).
Version 4, 16.09.2005
2. The service provider has not yet sent the rest
of the SMS.
61
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Info_Center.fm / 05.03.2010
Info centre – continuous Internet access from your phone
Info centre – continuous
Internet access from your
phone
You can use your desktop phone to retrieve
online content from the Internet i.e., request
info services that are provided specifically
for the telephone. The info services available
are constantly updated. A default selection
has already been made, but you can change
these settings and add new services. Visit
the Gigaset.net page www.gigaset.net on
the Internet and compile your personal info
services.
Customising info services
¤ Open the Web configurator page
Settings ¢ Services ¢ Info Services
¤
on the PC (see user guide for the Web
configurator on the enclosed CD).
Click the link gigaset.net/myaccount.
Or:
¤ Enter the following address in the
address field of your PC's Web browser:
www.gigaset.net
¤ Enter your Gigaset.net user ID and password on the Gigaset.net page. You will
find your user ID and password on the
Web configurator page specified above.
In both cases, a Web page is opened on
which you can compile your info services.
Please note
Version 4, 16.09.2005
You can start the info centre with the
desktop phone and with registered
Gigaset SL78H, S67H, SL400H and S79H
handsets and have info services displayed.
62
Starting info centre, selecting
info services
v ¢ Additional Features ¢ Info Centre
Your info centre menu i.e., a list of available
info services is displayed. You can navigate
between the info services.
s
Select the info service and
press §OK§.
To access certain info services (personalised
services), it is necessary to register with a
user name and password. In this case,
enter your access data as described in the
"Registering for personalised info services" section on page 63.
Messages when loading requested
information
The information is loaded from the Internet.
Wait a few seconds until the information is
displayed. The display shows Please wait....
If the information for an info service cannot
be displayed, one of the following messages
appears:
Requested page can’t be reached.
Possible causes of this are:
u Time limit exceeded (timeout) when
loading the information
u The Internet server for the info service
cannot be accessed.
¤ Check your Internet connection and
repeat the request at a later date.
Coding error on requested page
The content of the requested info service is
coded in a format which the desktop phone
cannot display.
Can’t display requested page
General error when loading the info service.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Info_Center.fm / 05.03.2010
Info centre – continuous Internet access from your phone
Login failed.
Registration has failed. Possible causes of
this are:
u You have not entered your registration
data correctly.
¤ Reselect the info service and repeat
the registration process. Please
remember that data is case sensitive.
u You are not entitled to access this info
service.
Navigating the info centre
Registering for personalised
info services
Skipping back to the previous
page
If a special registration process with user
name and password is required to access an
info service, the following is displayed after
the service has been called up:
Authent. Name
Enter the user name supplied by
the provider of the info service.
§Save§
Press the display key.
Password
Enter the password associated
with this user name.
§Save§
Press the display key.
If registration was successful, the requested
info service is displayed.
If registration failed, a message to this effect
appears on the display £ Messages when
loading requested information, page 62.
Please note
Version 4, 16.09.2005
Please remember that registration data
is case sensitive. For information on
entering text (¢ page 106).
Depending on the type of info service
requested, you can carry out the following
operations:
Scrolling within an info service
¤ You can use s to scroll downwards
within an info service, and t to scroll up
(back).
¤ Press the left display key.
Skipping back to the info centre
menu
¤ Briefly press the end key T.
You want to go offline:
Press and hold the end key a, the desktop phone returns to idle status.
Selecting a hyperlink
Hyperlink to further information:
If the page contains a hyperlink to further
information, this is indicated by the g icon.
If a page is opened using hyperlinks, the first
hyperlink is highlighted.
¤ Using the control keys (s and/or t) as
required, you can navigate to the hyperlink that you would like to select. The
hyperlink is then highlighted (by bars).
¤ Press the right display key §Link§, to open
the relevant page.
63
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Info_Center.fm / 05.03.2010
Info centre – continuous Internet access from your phone
Hyperlink to a phone number:
If a hyperlink contains a phone number, you
can copy the number to the local directory
or call the number directly (Click-2-Call functionality).
¤ Select the hyperlink using the s and/or
t keys, as required.
¤ You can identify a hyperlink of this type
by the fact that §Call§ is shown above the
right display key.
¤ Press the display key Ó to copy the
phone number to the local directory on
your desktop phone.
Or:
¤ Press §Call§ to call the stored number.
Depending on the provider, if you press §Call§:
u The number is either dialled directly or
u The number appears first in the display, in
which case you must first confirm the
number before it is dialled.
¤ If you press §Yes§, the number is dialled.
Or:
¤ If you press §No§, the page is displayed
again with the hyperlink. The number
will not be dialled.
Entering text
¤ If necessary, use q to navigate to the line
¤
¤
¤
containing the field into which you want
to enter text. The cursor flashes in the text
field.
Enter the text using the keys on the desktop phone (¢ page 106).
If necessary, navigate to other text fields
to complete them or make a selection
(see below).
Press the right display key to complete
the entry and send the data.
Making selections
Version 4, 16.09.2005
¤ If necessary, use q to navigate to the line
¤
64
in which you would like to make a selection.
Press left or right on the control key several times to make the required selection.
¤ Use q to navigate to other selection
¤
fields and make your selection as
described above.
Press the left display key to complete the
selection and send the data.
Setting options
¤ Use q to navigate to the line containing
the option. The line is highlighted.
¤ Activate or deactivate the option via the
¤
¤
control key v (press right) or the left display key (e.g., §OK§).
If necessary, navigate to other options or
text fields to set or complete them.
Press the left display key (e.g., §Send§) to
complete the entry and send the data.
Displaying information from
the Internet as a screensaver
You can configure your desktop phone to
display a customised information feed (e.g.,
weather reports, newsfeeds) in the device's
idle display.
To do so, you must enable the Info Services
screensaver on your desktop phone
(¢ page 87) and activate the display of info
services via the Web configurator.
Please note
The default setting is the weather report.
The text information appears on the display
approx. 10 seconds after the desktop phone
returns to idle status.
Depending on the information feed
selected, a display key appears on the right
of the screensaver (e.g., §More§),
¤ Press the right display key to call up further information.
¤ Press and hold the end key T to
return to idle status.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / answering_m.fm / 05.03.2010
Operating the desktop phone answering machine
Operating the desktop
phone answering
machine
You can operate the answering machine that
is integrated into the base telephone using
the keys on the desktop phone (¢ page 2),
via a registered handset or by remote operation (other phone/mobile phone). Your own
announcement message or advisory message can only be recorded via the desktop
phone or a handset.
The device has three answering machines
(AM1, AM2, AM3), which can be activated
and used independently of each other.
Once the desktop phone has been set up,
AM1 is activated and all desktop phone
MSNs are assigned to it as receive connections.
AM2 and AM3 are available once you have
assigned at least one receive connection to
them.
Each answering machine only receives calls
that are directed to its receive connections.
Each answering machine can only be operated via the end devices (desktop phone/
handsets) to which at least one of the
machine's receive connections is assigned.
Assigning receive connections
Prerequisite: At least two MSNs have been
configured on your desktop phone.
v ¢ Ï Settings ¢ Telephony
¢ Receive Connections
Answer Machine 1 / 2 /3
Select and press §OK§.
¤ You can enter data in the following fields:
Receive calls for xxx
(xxx = Name of the receive connection MSN1,
MSN1 ...)
If the receive connection is already
assigned to an answering machine, you
cannot select Yes.
Select No, if the receive connection
should not be assigned to this answering
machine.
Make this setting for every configured desktop phone connection.
Answering machine mode
You can use two different modes for each of
the three answering machines.
u In Answer & Record mode, the caller
hears the announcement and can then
leave a message.
u In Answer only mode, the caller hears
your announcement but cannot leave a
message.
Operating via the desktop
phone
The speaker activates automatically if you
receive an acoustic prompt or message
while operating. You can deactivate handsfree mode by picking up the receiver and
pressing the handsfree key d.
Operation via the menu on the desktop
phone is the same as operation via a registered Gigaset SL78H, SL400H or S79H handset.
Activating/deactivating and
setting answering machine mode
You can choose between Answer & Record,
Answer only and Alternating. By using the
Alternating setting, you can activate answer
and record mode for a set period of time,
outside this period the caller will only hear
the announcement.
v ¢ Ì ¢ Activation
Version 4, 16.09.2005
Select Yes, if the answering machine
should accept calls made on these
receive connection.
65
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / answering_m.fm / 05.03.2010
Operating the desktop phone answering machine
Version 4, 16.09.2005
The list of answering machines that share a
receive connection with the desktop phone
is displayed. Activated answering machines
are marked with μ.
q
If necessary, select answering
machine.
§Edit§
Press the display key.
¤ You can enter data in the following fields:
Activation:
Select On or Off to activate/deactivate
the answering machine.
Mode:
Select Answer & Record, Answer only or
Alternating.
If Alternating mode is selected:
Record from:
Enter hours/minutes for the start of the
period in 4-digit format.
(The time must be set.)
Record until:
Enter hours/minutes for the end of the
period in 4-digit format.
§Save§
Press the display key.
When you switch the answering machine
on, the remaining memory time is
announced. If the time has not yet been set,
a corresponding announcement is made
(set time ¢ page 92). The à icon is
shown on the display, as well as a digit
for the activated answering machine(s)
(e.g., Ã1, Ã2 3).
If the message memory if full and Answer &
Record or Alternating Mode has been
selected, you will first be asked to delete old
messages. The answering machine is activated as soon as you have deleted old messages.
If there is no time available, the answering
machine changes from Alternating mode to
Answer & Record mode until the time is
available again.
66
Activating the answering machine via
the key on the desktop phone
¤ Press the ý key to activate or deacti-
vate all answering machines that share a
receive connection with the desktop
phone.
If several answering machines are assigned
to the desktop phone and these are not all
deactivated, proceed as follows:
1. Press the ý key: All answering
machines assigned to the desktop phone
are activated.
2. Press the ý key: All answering
machines are activated.
Recording a personal
announcement/advisory message
The desktop phone is supplied with prerecorded announcements for answer and
record mode and for answer only mode. If a
personal announcement has not been
recorded, the relevant pre-recorded
announcement is used.
You can record your own personal
announcement for answer and record mode
and answer only mode.
v ¢ Ì ¢ Announcements
¢ Record Announcemnt. /
Record Advisory Msg.
q
If necessary, select answering
machine and press §OK§.
§OK§
Press the display key to start the
recording.
If you have not picked up the receiver,
handsfree mode is activated.
You hear the ready tone (short tone).
¤ Now speak your announcement (at least
3 secs.).
§End§
Press the display key to end the
recording.
Use &, the end key T or §Back§ to cancel
recording and §OK§ to restart the recording
process.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / answering_m.fm / 05.03.2010
Operating the desktop phone answering machine
After recording, the announcement is
played back for you to check. You can rerecord the announcement with §New§.
Please note:
u Recording ends automatically if the max-
imum recording time of 170 seconds is
exceeded or there is a break in speech for
more than 2 seconds.
u If you cancel the recording, the prerecorded announcement is used again.
u The recording is not started or cancelled
if the answering machine memory is full.
¤ Delete old messages and the answering machine will automatically switch
back to Answer & Record mode.
¤ Repeat recording if required.
Playing announcements
v ¢ Ì ¢ Announcements
¢ Play Announcement /
Play Advisory Message
q
If necessary, select answering
machine and press §OK§.
If you have not recorded a personal
announcement, the relevant pre-recorded
announcement is played.
Use &, the end key T or §Back§ to stop
playback.
Version 4, 16.09.2005
Record a new announcement while playing
the announcement:
§New§
Press the display key.
If the answering machine's memory is full, it
will switch to Answer only mode.
¤ Delete old messages and the answering
machine will automatically switch back
to Answer & Record mode. Repeat
recording if required.
Deleting announcements/advisory
messages
v ¢ Ì ¢ Announcements
¢ Delete Announcemnt. /
Delete Advisory Msg.
q
If necessary, select answering
machine and press §OK§.
§Yes§
Press the display key to confirm
the prompt.
Once you have deleted your announcement
for the specified answering machine, the relevant pre-recorded announcement is used
again.
Playing messages
The date and time of each message is logged
(provided this has been set, ¢ page 92)
and displayed during the playback. If Calling
Line Identification is activated, the caller's
number or name is displayed. If the caller's
number is saved in the directory, their name
is displayed. For more information about the
display, please see page 34.
Playing new messages
New messages that have not yet been
played back are indicated by the à icon in
the second display line and by the f key
flashing.
f
Press the message key.
Answer Mach. 1: / Answer Mach. 2: /
Answer Mach. 3:
Select from the list and
press §OK§.
Or:
ü
Press the play key.
q
If necessary, select answering
machine and press §OK§.
Or:
v ¢ Ì ¢ Play Messages
q
If necessary, select answering
machine and press §OK§.
Only the local answering machines that
share a receive connection with the desktop
phone are displayed.
67
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / answering_m.fm / 05.03.2010
Operating the desktop phone answering machine
The speaker on the desktop phone is activated.
If there are new messages, playback then
begins with the first new message. After the
last new message, you will hear the end tone
and an announcement stating how much
recording time remains.
If the message has been saved with the date
and time, you will hear an appropriate
announcement before playback begins.
All stored messages are played back regardless of the associated receive connection.
During playback, the entries in the answering machine list are shown on the display.
After the entry time and date have been
played back (after approx. 3 seconds), a new
message assumes the status "old".
Playing old messages
If there are no more new messages, you can
start playing older messages as described in
"Playing new messages" on page 67.
Stopping and controlling playback
Version 4, 16.09.2005
During message playback:
2
Pause playback. Press 2 again
to resume.
Or
§Options§ / w
Press the display key or the middle of the control key.
To continue select Continue
and press §OK§.
h (press and hold) or During time stamp playback:
Skip to previous message.
During message playback: Skip
to the start of the current message.
68
h (briefly press) or 4
During time stamp playback:
Skip to previous message.
During message playback:
Repeat the last five seconds of
the current message.
s or 3
Go to the next message.
If playback is interrupted for over a minute,
the answering machine returns to idle status.
Marking a message as "new"
A previously played back "old" message is
displayed as a "new" message again.
During message playback or pause:
*
Or:
Press the star key.
§Options§
Open menu.
Mark as New
Select and press §OK§.
An announcement informs you of the message's new status.
Playback of the current message is cancelled. Playback of next message starts, if
applicable.
The f key on the handset flashes.
Copying the phone number from a
message to the directory
During playback or pause:
§Options§ ¢ Copy to Directory
¤ Complete the entry (¢ page 48).
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / answering_m.fm / 05.03.2010
Operating the desktop phone answering machine
Deleting messages
You can either delete all old messages
together or individually.
Deleting all old messages
During playback or pause:
§Options§ ¢ Delete Old List §OK§
§Yes§
Press the display key to confirm
the prompt.
Deleting an individual message
During playback or pause:
§Delete§ / Q
Press the display key or the Q
digit key.
You can only delete new messages once the
time stamp has been played back along with
the first few seconds of the message.
Accepting a call from the
answering machine
Version 4, 16.09.2005
You can accept a call while the answering
machine is recording or is being operated
remotely:
c / §Accept§ / d
Pick up the receiver, press the
handsfree key or display key.
Recording stops and you can speak to the
caller.
If three seconds of the message have been
recorded when you accept the call, the message is saved. The message key f flashes.
You can answer the call, even if it is not signalled.
Diverting an external call to the
answering machine
You can divert an incoming external call to
the answering machine, even if it is deactivated.
It is only possible to divert a call, if:
u The call comes in on a receive connection
that is assigned to one of the answering
machines
u The answering machine, to which the
receive connection is assigned, is not
engaged with another call
u There is sufficient capacity available on
the answering machine
Prerequisite: An external call is signalled on
the desktop phone:
§Options§
Open menu.
Divert to AM
Select and press §OK§.
The answering machine starts immediately
in answer & record mode and records the
call. The set time for ring delay (page 70) is
ignored.
Activating/deactivating two-way
record
You can record an external call with the
answering machine.
Prerequisites:
u The MSN used for the call is assigned to
an answering machine as a receive connection.
u The answering machine, to which the
receive connection is assigned, is not
engaged with another call.
¤ Inform the caller that the call is being
recorded.
§Options§
Open menu.
Two-Way Record
Select and press §OK§.
69
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / answering_m.fm / 05.03.2010
Operating the desktop phone answering machine
Two-way record is indicated on the display
by an advisory text and is added to the
answering machine list as a new message.
§End§
Press the display key to stop
two-way record.
The maximum recording time depends on
the capacity available on the answering
machine. If the memory is full, you will hear
an end tone, the recording is aborted, and
the call recorded up to that point is listed in
the answering machine list as a new message.
Activating/deactivating call
screening
While recording a message, you can screen a
call via the desktop phone speaker or registered handsets.
Permanently activating/deactivating
call screening
v ¢ Ì ¢ Call Screening
Desktop Phone
Select to activate/deactivate
call screening on the desktop
phone (³= on).
Handset Select to activate/deactivate
call screening on the registered
handsets (³= on).
§Change§
Select display key to activate/
deactivate the function.
Deactivating call screening for the
current recording
You can deactivate the function during the
recording.
On the desktop phone:
§Silence§
Press the display key.
Answering a call
Version 4, 16.09.2005
d / c Press the handsfree key or pick
up the receiver.
70
Setting the recording
parameters
The answering machine has already been
preset at the factory. Individual settings can
be adjusted via the desktop phone or a registered handset.
v ¢ Ì ¢ Recordings
¤ You can enter data in the following fields:
Length:
Maximum recording time 1 Min.,
Select 2 Min., 3 Min. or Maximum.
Quality:
Select Long Play or Excellent recording
quality. If the quality is higher, the maximum recording time is reduced.
Ring Delay:
Select when the answering machine
should accept a call: Immediately,
after 10 sec., 18 sec., 30 sec. or
Automatic.
§Save§
Press the display key.
Information about ring delay
In Automatic mode, the following applies
for ring delay:
u If there are no new messages, the answering machine answers a call after 18 seconds.
u If there are new messages, the answering
machine answers a call after 10 seconds.
When operating remotely(¢ page 71), you
can tell after approx. 15 seconds that there
are no new messages (otherwise the
answering machine would have already
accepted your call). There are no call charges
if you hang up now.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / answering_m.fm / 05.03.2010
Operating the desktop phone answering machine
Changing the language for voice
prompt and pre-recorded
announcement
v
Open the main menu.
*#Q5#2
Enter digits and press
To set Czech.
Q §OK§
§OK§
To set Slovene.
2 §OK§
To set Croatian.
3 §OK§
To set English.
4 §OK§
To set Greek.
Operating when on the move
(remote operation)
You can check and activate your answering
machine from any other telephone (hotel,
pay phone etc.).
Prerequisites:
u You have set a system PIN other than
0000 (page 93).
u The phone you are using for remote oper-
ation has tone dialling (DTMF) i.e., you
hear different tones when you press the
keys. Alternatively, you can use a code
transmitter (available from your mobile
phone retailer).
u The connection/MSN via which you call is
assigned to the answering machine as a
receive connection.
Calling the answering machine and
playing messages
~
9~
Version 4, 16.09.2005
~
Dial your own number.
When you hear your announcement: Press 9.
The announcement is aborted.
Enter system PIN.
The following keys are used for operation:
A
During time stamp playback:
Skip to previous message.
During message playback: Skip
to the start of the current message.
B
Stop playback. Press again to
resume.
After a pause of approx. 60 seconds, the connection is ended.
3
Go to the next message.
D
Repeat the last five seconds of
the message
0
During message playback:
Delete current message.
:
Change the status of a previously played back message to
"new".
The next message starts to play.
The remaining capacity is
announced at the end of the last
message.
Activating the answering machine
¤ Phone home and let the phone ring until
you hear: "Please enter PIN" (approx. 50
seconds).
~
Enter system PIN.
Your answering machine is activated. It tells
you how much capacity is left.
The messages are played.
The answering machine cannot be deactivated remotely.
If you enter an incorrect PIN or input is taking too long (more than ten seconds), the
connection is ended. The answering
machine will remain deactivated.
You are informed whether any new messages have been recorded. The messages are
played. You can now operate the answering
machine with the keypad.
71
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Net-AB.fm / 05.03.2010
Using the network mailbox
Using the network
mailbox
Some providers offer answering machines
on the network – network mailboxes.
You need to have requested the network
mailbox from your network provider. You
can store the number of the network mailbox on the desktop phone.
Network mailbox: Entering
numbers
v ¢ Ì Answering Machine
¢ Network Mailbox
~
Enter or change the phone
number for the network mailbox if necessary.
§Save§
Press the display key.
To activate/deactivate the network mailbox,
please refer to information from the network
provider.
Configuring the (network)
mailbox for quick dial
You can use quick dial to make direct calls to
the network mailbox or the integrated desktop phone answering machine.
Assigning key 1, changing
assignment
Version 4, 16.09.2005
Quick dial settings are device-specific. You
can assign a different answering machine to
key on the desktop phone and each registered handset.
No answering machine is preconfigured for
quick dial in the default settings.
Press and hold key .
72
Or:
v ¢ Ì Answering Machine
¢ Set Key 1
Network Mailbox / Answering Machine
s
Select entry and press §OK§
(Ø = on).
You have selected the local Answering
Machine:
Quick dial is immediately activated for the
local answering machines on the desktop
phone.
You have selected the network
mailbox:
If a number is already stored for the network
mailbox, quick dial is activated immediately.
T
Press and hold end key (idle status).
If no number is saved for the network mailbox, you are asked to enter the number of
the network mailbox.
~
Enter the number for the network mailbox.
§Save§
Press the display key.
T
Press and hold end key (idle status).
Quick dial is activated.
Please note
You can only assign quick dial to one
answering machine.
You can also call the network mailbox
directly via the message key
(¢ page 73).
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Net-AB.fm / 05.03.2010
Using the network mailbox
Calling the network mailbox
Press and hold.
If you have set the network mailbox for quick
dial you are connected directly to the network mailbox.
d
If necessary, press the handsfree
key.
You hear the network mailbox announcement.
If you have set quick dial for the local
answering machine on the desktop phone,
message playback starts only if one answering machine is assigned a receive connection for the desktop phone. If you have
assigned several answering machines to the
desktop phone, then a list of answering
machines will appear.
Calling the network mailbox using
the message key
f
Press the message key.
Network Mailbox
Select the network mailbox
entry and press §OK§.
You are connected directly to the network
mailbox and hear its announcement. Messages can generally be played back using
your handset keypad (digit codes). Listen to
the announcement.
Displaying new messages in the
handset's idle display
Version 4, 16.09.2005
If a new message is present on the network
mailbox, or there is a new message on the
integrated answering machine, the Ã
icon and the number of new messages are
shown on the handset's idle display. The
f message key flashes.
73
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / add_features.fm / 05.03.2010
ECO DECT: Reducing energy consumption and radiation
ECO DECT:
Reducing energy
consumption and
radiation
Activating/deactivating
Eco Mode / Eco Mode+
v ¢ Settings ¢ Eco Mode
¢ Eco Mode / Eco Mode+
§Change§
Press display key (³ = on).
Idle status displays
You are helping to protect the environment
with your Gigaset phone.
Display icon
Reducing energy consumption
¼ green
¼ white
Your desktop phone has a power-saving
adapter plug and uses less power.
Reducing radiation
The radiation reduces automatically
depending on the distance of the registered
handsets to the desktop phone. The closer
the handsets are to the desktop phone, the
lower the radiation.
You can further reduce the radiation from
the handsets and desktop phone by using
Eco Mode.
Eco Mode reduces radiation by 80% –
whether you are making a call or not.
Eco Mode reduces the range of the desktop
phone by approx. 50%. Using Eco Mode
always makes sense when a reduced range is
sufficient.
Switching off radiation
Version 4, 16.09.2005
Eco Mode+
When you activate Eco Mode+, the radiation
(DECT transmission power) from the desktop phone and handset is deactivated in idle
status, assuming all registered handsets support Eco Mode+.
Eco Mode / Eco Mode+ can be activated/
deactivated independently of one another
and can also be used when multiple handsets are registered on the desktop phone.
74
Eco Mode+ activated
Eco Mode+ and
Eco Mode activated
Please note
u When using Eco Mode+, you can
u
u
u
u
ensure that the range of the desktop
phone is sufficient by pressing and
holding the talk key on a handset. You
hear the ringing tone if the desktop
phone can be reached.
When Eco Mode+ is activated:
– Call setup is delayed by approx.
2 seconds on the handset.
– Handset standby time is reduced
in certain circumstances.
Registering handsets that do not support Eco Mode+ causes the mode to
be deactivated on the desktop phone
and all other registered handsets.
Activating Eco Mode reduces the
range of the desktop phone.
Eco Mode / Eco Mode+ and repeater
support (¢ page 97) cancel each
other out i.e., if you use a repeater, you
cannot use Eco Mode or Eco Mode+.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / add_features.fm / 05.03.2010
Setting an appointment (calendar)
Setting an appointment
(calendar)
You can use your desktop phone to remind
yourself of up to 30 appointments. Anniversaries entered in the directory (¢ page 49)
are automatically recorded in the calendar.
You can select whether the graphic calendar
should be displayed in idle status.
When the desktop phone is in idle status:
§Calendar§
Press the display key.
Or:
v ¢ Í Organizer ¢ Calendar
Then:
§Options§ ¢ Show cal. in idle
¤ Press §Change§ to activate/deactivate the
function (³ = on).
Saving an appointment.
Prerequisite: The date and time have
already been set (page 92).
v ¢ Í Organizer ¢ Calendar
September 2010
Mo
Tu
We
Th
Fr
Sa
Su
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Back
Options
u The current day is selected (outlined in
orange).
Version 4, 16.09.2005
u Days on which appointments have
already been saved are highlighted in
orange.
r/ q
Select the required day in the
graphical calendar.
To skip to the next/previous month, go to
the last/first day of the month being displayed and then press right/left on the control key.
The selected day is outlined in orange.
The current day is outlined in white.
After selecting the day:
w
Press the middle of the control
key.
u If appointments have already been
entered, this will open the list of saved
appointments on that day.
Use <New Entry> ¢ §OK§ to open the
window and input a new appointment.
u If no appointments have been entered,
the input window will open immediately
to add the new appointment.
¤ You can enter data in the following fields:
Activation:
Select On or Off.
Date:
Enter the selected date in this field.
Enter day/month/year in 8-digit format, if
necessary.
Time:
Enter hours/minutes in 4-digit format.
Text:
Enter text (max. of 16 characters). The
text appears as the appointment name in
the appointment list and is displayed on
the screen during the appointment
reminder. If you do not enter any text,
only the date and time of the appointment are displayed.
Signal:
Select a melody with which the appointment should be signalled. If you select
Visual only, the appointment is only
shown on the display.
§Save§
Press the display key.
Please note
If you have already saved thirty appointments, you will have to delete an existing
appointment before adding a new one.
75
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / add_features.fm / 05.03.2010
Setting an appointment (calendar)
Signalling appointments and
anniversaries
In idle status, an appointment reminder is
signalled with the selected ringer melody
and will sound for 60 seconds. The name is
displayed for anniversaries, while the
entered text is displayed for appointments
along with the time.
ØÜ
Meeting
15:38
Off
SMS
You can either deactivate or answer an
appointment reminder:
§§Off§§
Press the display key to deactivate the appointment reminder.
Or:
§SMS§
Press the display key to accept
the appointment reminder with
an SMS.
Please note
During a call, the appointment reminder
is signalled by a short tone.
It is entered in the missed alarms list.
Managing appointments
v ¢ Í Organizer ¢ Calendar
Editing individual appointments
r/ q
Select a day in the graphical
calendar and press the control
key w. (Days on which appointments/anniversaries have
already been saved are highlighted in orange in the calendar).
A list containing the entries for this day is displayed. Anniversaries are marked with j,
activated appointments with μ.
q
Select appointment/anniversary.
§§View§§
Press the display key to view the
entry.
You can only display anniversaries. You can
edit an anniversary via the directory
(¢ page 49).
With an appointment, select §Options§ for the
following options:
Edit Entry
(Similar to Saving an appointment.
¢ page 75)
Delete Entry
Delete a selected appointment from the
list.
Activate / Deactivate
Activate/deactivate an appointment.
A deactivated appointment is not signalled.
Deleting all appointments
Version 4, 16.09.2005
In the monthly view:
§Options§ ¢ Delete all appoint. ¢ §OK§
Confirm the security prompt with §Yes§.
All appointments are deleted.
76
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / add_features.fm / 05.03.2010
Setting the alarm clock
Displaying missed
appointments, anniversaries
Missed appointments/anniversaries
(page 49) are displayed in the Missed
Alarms list if:
u You do not accept an appointment/anniversary.
u The appointment/anniversary was signalled during a phone call.
The n icon and the number of new entries
are shown in the display. The most recent
entry is at the head of the list.
Open the list by pressing the message key
f(¢ page 44) or via the menu:
v ¢ Í Organizer ¢ Missed Alarms
q
Select appointment/
anniversary.
Information about the appointment/anniversary is displayed. A missed appointment
is shown with the appointment name
(¢ page 75), a missed anniversary with
name and surname. The date and time will
also be given.
§Delete§
Delete appointment
Or:
§SMS§
Write an SMS.
If 10 entries are already stored in the list, the
next appointment reminder will delete the
oldest entry.
Setting the alarm clock
Prerequisite: The date and time have
already been set (page 92).
Time:
Enter the wake-up time in 4-digit format.
Occurrence:
Select Daily or Monday-Friday.
Volume:
Set the volume for the alarm (1–5) or crescendo ring (volume increases with each
ring = ‡).
Signal:
Select the melody for the alarm.
§Save§
Press the display key.
In the idle display header, you will see the
¼ icon and the wake-up time.
A wake-up call is signalled on the display
and with the selected ringer (¢ page 3).
The wake-up call sounds for 60 seconds.
If no key is pressed, the wake-up call is
repeated twice at five minute intervals and
then switched off.
During a call, the wake-up call is only signalled by a short tone.
Deactivating the wake-up call/
repeating after a pause
(snooze mode)
Prerequisite: A wake-up call is sounding.
§Off§
Press the display key. The wakeup call is deactivated.
Or
§Snooze§
Press the display key or any key.
The wake-up call is deactivated
and then repeated after 5 minutes. After the second repetition
the wake-up call is deactivated
completely.
Version 4, 16.09.2005
Activating/deactivating the alarm
clock and setting the wake-up time
v ¢ Í Organizer ¢ Alarm Clock
¤ You can enter data in the following fields:
Status:
Select On or Off.
77
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / HS_and_other_Devices.fm / 05.03.2010
Connecting/using other devices
Connecting/using other
devices
You can upgrade your desktop phone to a
"PABX" by connecting other communication
devices.
You can register up to six handsets and
six Gigaset repeaters to your desktop phone.
Each registered device is assigned an internal number (2–7) and an internal name
(INT 2–INT 7). The number assignment and
names can be changed.
If all internal numbers have already been
assigned on your desktop phone, you must
deregister a handset that is no longer
required before registering a new one.
You can also connect an analogue fax
machine (¢ page 85 and ¢ page 98) and
two Bluetooth devices (a headset and a data
device, ¢ page 82) to the desktop phone.
Registering handsets
You can register up to six handsets or six
Gigaset repeaters to your desktop phone.
You must register a handset on the desktop
phone (1) and on the handset itself (2).
1. On the desktop phone:
Version 4, 16.09.2005
To set the desktop phone to registration
mode:
v ¢ Ï ¢ Registration
¢ Register Handset
The desktop phone's DECT interface is
(assuming it is deactivated) automatically
activated as soon the desktop phone is set
to registration mode.
You can register the handset as long as the
display on the desktop phone shows the
message Please register your handset.
78
2. On the handset:
Within approx. 60 secs.
¤ Start the registration procedure on the
handset in accordance with the handset's operating instructions.
~
If required, enter the system
PIN for the desktop phone
(default: 0000) and press §OK§.
After registering successfully
Handset registered is shown on the desktop
phone's display.
Please note
If six handsets are already registered to the
desktop phone (the internal numbers 2–7
are already assigned), you have two
options:
u The handset assigned the internal
number 7 is in idle status:
The handset that previously had the
number 7 is deregistered; the new handset is registered and is assigned the
internal number 7.
u The handset assigned the internal
number 7 is in use:
The handset to be registered cannot be
registered. A message to this effect is
displayed on the handset.
Assigning send and receive
connections to the handset
If several MSNs are configured on the desktop phone, the connection wizard for the
handset is started, enabling you to assign
send and receive connections to this handset. For the connection wizard procedure,
please see page 18.
Assigning the internal number
The desktop phone assigns the lowest free
internal number to the handset (possible
numbers: 2–7). The internal number is
shown on the handset display e.g., INT 2.
This means that the handset has been
assigned the internal number 2. The desktop
phone is assigned the internal number 1.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / HS_and_other_Devices.fm / 05.03.2010
Connecting/using other devices
Deregistering handsets
Making internal calls
On the desktop phone:
v ¢ Ï ¢ Registration
¢ De-register Handset
The list of registered devices (internal parties) is displayed.
s
Select the internal party you
wish to deregister and press §OK§.
~
Enter the current system PIN
and press §OK§.
§Yes§
Press the display key to confirm
the prompt.
Internal calls using registered handsets are
free of charge.
The handset is deregistered immediately,
even if it is not in idle status.
Calling all internal parties
("group call")
Locating a handset ("Paging")
You can use the desktop phone to search for
the registered handsets.
Prerequisite: There are internal parties registered on the desktop phone. There are a
maximum of two connections between the
internal parties.
u
Open list of internal parties.
Find handset
Select and press §OK§.
All handsets will ring simultaneously ("paging"), even if the ringers are deactivated.
An external call will not interrupt the paging
process.
Ending paging
¤ Press the display key §Back§ or end key
Version 4, 16.09.2005
T.
You can end the paging call prematurely by
pressing the talk or end call key on one of
the handsets.
The paging call ends automatically after
approx. 30 secs.
Calling a specific handset
u
~
Or:
u
s
c
Initiate internal call.
Enter the number of the internal
party.
Initiate internal call.
Select the internal party.
Lift handset.
u
Press and hold left on the control key.
All handsets are called.
Or:
u
Initiate internal call.
*
Press the star key.
Or
Call All
Select
c
Lift handset.
All handsets are called.
Ending a call
&
Replace the receiver.
Transferring a call to a handset
You can transfer an external call to a handset
(connect).
u
Open the list of handsets.
The external participant hears
music on hold, if activated
(¢ page 91).
If more than one handset is registered:
s
Select a handset or Call All and
press §OK§.
79
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / HS_and_other_Devices.fm / 05.03.2010
Connecting/using other devices
When the internal participant answers:
¤ If necessary, announce the external call.
& / T Replace the receiver or press the
end key.
The external call is transferred to the other
handset.
Ending a conference
If the internal participant does not answer or
the line is busy, press the display key §End§, to
return to the external call.
You can also replace the receiver before the
internal participant picks up when transferring the call.
Then, if the internal participant does not
answer or the line is busy, the call will automatically return to you.
External call waiting during an
internal call
Initiating an Internal consultation/
conference
When you are conducting an external call,
you can call an internal participant at the
same time for consultation or hold a conference call between all three participants.
You are conducting an external call:
u
Open the list of handsets.
The external participant hears
music on hold, if activated
(¢ page 91).
s
If more than one handset is registered: Select handset and
press §OK§.
You are connected to the internal participant.
Either:
§Options§ ¢ End Active Call
You are reconnected with the
external participant.
Or:
§Conf.§
Press the display key.
All 3 participants are connected
with each other.
Version 4, 16.09.2005
If the internal participant does not answer:
¤ Press display key §End§ to return to the first
external caller.
80
An internal participant pressing the end call
key (on the handset) or the end key T
does not affect the connection between the
other internal participant and the external
participant.
If you receive an external call during an
internal call, you will hear the call waiting
tone (short tone). The caller's number or
name will appear in the display if Calling
Line Identification is enabled.
Rejecting the external call
§Reject§
Press the display key.
The call waiting tone is turned off. You
remain connected with the internal participant. The external caller will hear the busy
tone.
Ending an internal call
&/T
Replace the receiver or press the
end key.
The external call is signalled as an incoming
call on the desktop phone. You can accept
the call (¢ page 34):
Accepting an external call
§Accept§
Press the display key.
You are connected to the external caller.
The internal call is placed on hold.
You have the following options:
u Connect to both participants:
¤ Use q to swap between the participants.
u Speak to both participants at the same
time:
¤ Press display key §Conf.§ to establish
the conference call. Press display key
§EndConf§ to return to call swap mode.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / HS_and_other_Devices.fm / 05.03.2010
Connecting/using other devices
Internal call waiting during an
internal/external call
If an internal participant attempts to call you
while you are involved in an external or
external call, this call is shown on the display
(internal call waiting). You can either accept
or reject this call.
Press any key to make this prompt disappear
from the display.
You must end the current call to accept the
internal call. Then the internal call is signalled as per usual. You can accept the call.
Changing the name of an
internal participant
Version 4, 16.09.2005
The names "INT 2", "INT 3" etc. are assigned
automatically at registration. You can
change these names. The name must be no
more than 10 characters. The modified name
will then appear in the list of internal participants.
u
Open list of internal participants.
s
Select handset.
§Options§
Open menu.
Rename
~
Enter name.
§Save§
Press the display key.
Changing the internal
number of an internal
participant
The desktop phone is assigned the internal
number INT 1 as a default setting.
A handset is automatically assigned the
lowest free internal number from 2–7 during
registration. If all numbers are in use, then
the number 7 is overwritten as long as this
handset is in idle status. You can change the
internal number of the desktop phone and
all registered handsets (1–7).
u
Open list of internal participants. Your own device is
marked with < .
§Options§
Open menu.
Assign Handset No.
Select and press §OK§.
r
Select number. Only numbers
that have not been assigned are
displayed.
§Save§
Press the display key to save the
input.
81
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / HS_and_other_Devices.fm / 05.03.2010
Connecting/using other devices
Using Bluetooth devices
Your desktop phone can communicate wirelessly via Bluetooth™ with other devices
using this technology.
Use Bluetooth to do the following on the
desktop phone:
u Register a Bluetooth headset
u Register up to 5 data devices (PC, PDA),
with which you can swap directory
entries in the form of vCards
u Load ringer melodies and images from
the PC to the desktop phone with the
help of the QuickSync software
(page 107).
Before you can use your Bluetooth devices,
you must first activate Bluetooth and then
register the devices to the desktop phone.
To use the phone numbers, dialling codes
(country and area code) must be stored on
the desktop phone (page 93).
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Please note
u You can operate headsets on your
Version 4, 16.09.2005
handset that have the headset or
handsfree profile. If both profiles are
available, the handsfree profile is used
to communicate.
u It can take up to five seconds to establish a connection between your desktop phone and a Bluetooth headset.
This applies both when a call is
accepted using the headset or transferred to the headset, and when a
number is dialled from the headset.
82
Activating/deactivating Bluetooth
mode
v ¢ ò Bluetooth
Activation Select and press §OK§ to activate
or deactivate Bluetooth mode
(³ = activated).
When the desktop phone is in idle status, the
ò icon in the header indicates that Bluetooth
mode is activated (page 3).
As soon as Bluetooth is activated, your desktop phone is visible to all Bluetooth devices
in the receiving range and can communicate
with all of the devices included in the Known
Devices list.
In Bluetooth mode, incoming calls are
ignored.
Registering Bluetooth devices
The distance between the desktop phone in
Bluetooth mode and the activated Bluetooth device (headset or data device) should
be no more than 10 m.
Please note
u If you register a headset, any headset
that is already registered is overwritten.
u If you would like to use a headset
already registered to another device
(e.g., to a mobile phone) with your
desktop phone, please deactivate
this connection before you start the
registration process.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / HS_and_other_Devices.fm / 05.03.2010
Connecting/using other devices
Searching for Bluetooth devices
v ¢ ò Bluetooth ¢ Search for Headset
/ Search for Data Device
The search can take up to 30 seconds.
Any incoming calls are ignored during the
search.
Cancelling/repeating current search
Cancelling the search:
§Cancel§
Press the display key.
Repeat search if necessary:
In the known devices list:
§Options§
Press the display key.
Repeat Search
Select and press §OK§.
Adding the Bluetooth device to the
known devices list
Version 4, 16.09.2005
Once the device has been found, its name or
address is shown on the display.
§Options§
Press the display key.
Trust Device
Select and press §OK§.
~
Enter the PIN of the Bluetooth
device to be registered and
press §OK§.
¤ Generally you can enter a PIN of your
choice for a data device. Subsequently,
you must enter this PIN in the data device
too.
¤ Enter the preset PIN for the headset (usually: 0000). For further information,
please refer to the headset user guide.
The device is saved in the list of known
devices.
Please note
u The known devices list can only con-
tain one Bluetooth headset. If you
register a second headset, the first
one is deleted from the list.
u If the list already contains six entries,
the last device to be entered is
deleted during the subsequent registration process. Exception: The headset entry is only overwritten by a new
headset and a headset only overwrites the headset entry.
Editing the list of known (trusted)
devices
Open list
v ¢ ò Bluetooth ¢ Known Devices
A corresponding icon appears next to each
device name in the list displayed:
Icon
ô
õ
Meaning
Bluetooth headset
Bluetooth data device
No icon is displayed for multiple service
devices.
If a device is connected, the corresponding
icon is shown in the header of the display
instead of ò.
Viewing entries
Open list ¢ s (select entry)
§Options§
Press the display key.
View Entry Select and press §OK§.
Device name and address are displayed.
Go back with §OK§.
83
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / HS_and_other_Devices.fm / 05.03.2010
Connecting/using other devices
Deregistering Bluetooth devices
Open list ¢ s (select entry)
§Options§
Press the display key.
Delete Entry
Select and press §OK§.
Bluetooth is activated, if necessary.
Please note
If you deregister an activated Bluetooth
device, it may try to reconnect as an
"unregistered device".
Renaming a Bluetooth device
Open list ¢ s (select entry)
§Options§
Press the display key.
Rename
Select and press §OK§. Bluetooth
is activated, if necessary.
~
Change the name.
§Save§
Press the display key.
Rejecting/accepting an
unregistered Bluetooth device
Version 4, 16.09.2005
If a Bluetooth device that is not registered in
the list of known devices tries to connect
with the desktop phone, you are prompted
on the display to enter the PIN for the Bluetooth device (bonding).
u Reject
T
Briefly press the end key.
84
u Accept
~
Enter the PIN for the Bluetooth
device you want to accept and
press §OK§.
If you have accepted the device, you can
use it temporarily (i.e., as long as it is
within receiving range) or save it to the
list of known devices.
Once the PIN has been confirmed, save to
the list of known devices:
– §Yes§ Press the display key.
– §No§ Press the display key to use the
device temporarily.
Please note
If you only accept the registration of a
headset on a temporary basis, the headset is not deleted from the known
devices list.
Changing the Bluetooth name of
the desktop phone
You can change the desktop phone name
used to identify it on the display of another
Bluetooth device.
v ¢ ò Bluetooth ¢ Own Device
§Change§
Press the display key. Bluetooth
is activated, if necessary.
~
Change the name.
§Save§
Press the display key.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / HS_and_other_Devices.fm / 05.03.2010
Connecting/using other devices
Connecting a fax machine
You can connect an ITU-T Group 3 fax
machine to the desktop phone via the FAX
port.
3
1
2
After activating the FAX port, the fax
machine is added to the list of internal
participants with the internal name INT 8.
The fax machine is assigned all of the desktop phone's numbers as receive connections. The first number from the configuration is assigned as a send connection. You
can change the assignment (¢ page 96).
Please note
If a number is only assigned to the fax
machine as a receive connection, then
calls to this number will not be entered in
the call lists (it is not possible to read the
entries from the desktop phone or a
handset).
1. Insert one end of the fax connection cable from the rear into the recess in the
housing.
2. Plug the jack into the fax port on the
desktop phone (labelled: FAX).
3. Connect the fax connection cable to the
port on the fax machine.
Version 4, 16.09.2005
You do not explicitly have to register the fax
machine to the desktop phone. It is automatically "registered", once you activate the
FAX port on the desktop phone
(¢ page 98, default setting is "off").
85
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Setting the desktop phone
Setting the desktop
phone
Your desktop phone is preset, but you can
change the settings to suit your individual
requirements.
The settings described in this chapter only
have a local effect on the desktop phone.
The corresponding setting on any of the registered handsets does not change.
Quickly accessing functions
and numbers
You can program the six function keys on the
right-hand side of the desktop phone and
the display keys (in idle status). You can
assign a phone number (quick dial) or a
desktop phone function to each of these
keys and change the assignment.
The number is then dialled or the function
started by simply pressing a key.
Changing key assignments
Version 4, 16.09.2005
In idle status:
¤ Press and hold the display/function key
until a list of possible key assignments is
displayed.
The following functions are available:
Quick Dial
Assign a number from the local directory
to the key.
The directory is opened.
¤ Select an entry and press §OK§.
If you delete or edit the entry in the directory, this will not affect the assignment to
the function key or display key.
This means that if the phone number
changes, you must re-assign the updated
entry from the directory to the key as
described above.
86
Alarm Clock
Assign menu for setting and activating
the alarm clock to a key (¢ page 77):
v ¢ Í Organizer ¢ Alarm Clock
Calendar
Open calendar/enter new appointment
(¢ page 75):
v ¢ Í Organizer ¢ Calendar
Bluetooth
Assign the Bluetooth menu to a key
(¢ page 82):
v ¢ ò Bluetooth
Headset
Accept or pick up a call with the connected headset.
R Function
Not relevant.
Insert P
Key inserts a dialling pause (a P) when
inputting a number
More Functions...
More features are available:
u Send Connection
Assign an alternative send connection to
a key.
¤ Select an MSN from the MSN list as
(another) send connection for the
desktop phone and press §OK§.
Press this display or function key, if the
alternative send connection should be
used (temporarily) for the subsequent
call (instead of the send MSN for the desktop phone).
u Line Selection
Assign the list of selected MSNs to a key.
Select the send connection for the next
call from the list (¢ page 33).
u Call Lists
Assign the call list menu to a key
(¢ page 43):
v ¢ Ê Call Lists
u Withhold Number
Restrict Calling Line Identification for the
next call (¢ page 39).
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Setting the desktop phone
u Call Divert
Assign menu for setting and activating/
deactivating call divert to a key
(¢ page 37):
v ¢ Ç Select Services ¢ Call Divert
Display key assignment: The selected function or the corresponding directory name
for the phone number (or its abbreviation) is
displayed in the lowest display line above
the display key.
Function key assignment: You can make a
note of the key assignment on the insert
strip next to the respective key.
Starting the function, dialling the
number
When the desktop phone is in idle status:
¤ Briefly press the function or display key.
Depending on the key assignment:
u A number is dialled directly.
u Function menu or list is opened.
Changing the display
language
You can view the display texts in different
languages.
v ¢ Ï Settings ¢ Language
The current language is indicated by a Ø.
s
Select language and
press §Select§.
If you accidentally choose a language you do
not understand:
Version 4, 16.09.2005
v* # Q 3 #
Press keys in sequence.
s
Select the correct language.
§Select§
Press the right display key.
Setting the display
Setting the screensaver/slideshow
You can display a screensaver when the
desktop phone is in idle status. You have the
following options:
u A picture from the Screensavers folder in
the Resource Directory (¢ page 91)
u All pictures from the Screensavers folder
in the Resource Directory displaying one
after the other in the form of a Slideshow
u Date and time as a digital display (Digital
Clock)
u Analogue time (Analog Clock –
clock-hand display)
u Information from an info service (Info
Services – weather information, horoscope etc.). You must have activated the
display of info services via the Web configurator. The type of info service cannot
be changed.
The desktop phone must be connected
to the Internet to display info services.
If there is no information currently available, the time is displayed in digital format
(Digital Clock).
The screensaver replaces the idle status display. It may conceal the calendar, date, time
and name.
The screensaver is not displayed in certain
situations e.g., during a call.
If a screensaver is activated, the Screensaver
menu option is marked with ³.
v ¢ Ï Settings ¢ Display
¢ Screensaver
The current setting is displayed.
¤ You can enter data in the following fields:
Activation:
Select On (screensaver is displayed) or
Off (no screensaver).
87
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Setting the desktop phone
Selection:
Select screensaver with r Or
§View§
Press the display key. The active
screensaver is displayed.
s
Select screensaver and
press §OK§.
§Save§
Press the display key.
The screensaver is activated approx. 10 seconds after the display has changed to idle
status.
If the screensaver conceals the display,
briefly press end key T to show the idle
display.
Setting the brightness and time
control for the display backlight
Version 4, 16.09.2005
You can set the brightness of the display on
your desktop phone and specify a timeframe
during which the display is completely deactivated e.g., at night.
If the display backlight is deactivated, it can
be reactivated by pressing any key or by an
incoming call. The display backlight is deactivated again after approx. 30 seconds after
the last press of a key.
v ¢ Ï ¢ Display ¢ Backlight
The current setting is displayed.
¤ You can enter data in the following fields:
Time Control
Prerequisite: The date and time have
already been set.
Select On or Off.
The following fields are displayed when
Time Control = On.
Display off from:
Enter the time in 4-digit format when the
backlight should be deactivated in idle
mode.
Display off until:
Enter the time in 4-digit format when the
backlight should be reactivated.
88
Brightness:
Set the brightness of the display backlight with r.
You can select from five brightness levels
(1 = low – 5 = very bright; e.g., brightness
level 3 = Š).
¤ Press the display key §Save§.
Changing the handsfree/
earpiece volume
You can set the volume for handsfree mode
and earpiece mode to five different levels.
Setting the volume in idle status
v ¢ Ï ¢ Audio Settings
¢ Call Volume
You will hear a test tone.
r
Set the earpiece volume.
s
Scroll to the Speaker line.
r
Set the handsfree volume.
§Save§
Press the display key to save
the setting.
Setting the volume during a call
You can adjust the volume during a call
using the R and S keys. Each time
you press the key, the volume will increase or
decrease by one level.
§Save§
Press the display key if necessary to save the setting permanently.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Setting the desktop phone
Setting ringers
Setting the volume
You can choose between five volumes (1–5;
e.g., volume 3 = Š) and the "crescendo"
ringer (6; volume increases with each ring =
‡).
You can set different volumes for the following functions:
u Internal calls and appointments
(Appointments ¢ page 75)
u For external calls
v ¢ Ï ¢ Audio Settings
¢ Ringer Settings ¢ Volume
r
If necessary, set the volume for
internal calls and appointment
notification.
s
Scroll to the next line.
r
If necessary, set the volume for
external calls.
§Save§
Press the display key to save the
setting.
When choosing the setting, the ringer will
sound in the volume currently selected.
Setting the ringer melody
You can select various ringers, melodies or
any sound from the resource directory
(page 91).
You can set different ringers for the following functions:
u Internal calls
u For external calls to each individual
receive connection on the desktop
phone (MSN1 to MSN10)
In idle status:
v ¢ Ï Settings ¢ Audio Settings
¢ Ringer Settings ¢ Melodies
q
Select Internal calls or a receive
connection (MSN1 to MSN10).
r
Select the melody for this connection.
sr
Where necessary, select the
next connection and set a melody etc.
§Save§
Press the display key to save the
settings.
Or:
You can set the ringer melody so it is used for
both internal and external calls.
q
Select All calls.
r
Select melody.
§Save§
Press the display key.
§Yes§
Version 4, 16.09.2005
Press the display key to confirm
the settings.
The setting for all calls will not work as soon
as you change the setting for an individual
connection.
89
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Setting the desktop phone
Setting time control for external
calls
You can specify a time period when you do
not want the desktop phone to signal external calls e.g., during the night.
Prerequisite: The date and time have
already been set.
v ¢ Ï ¢ Audio Settings
¢ Ringer Settings ¢ Time Control
¤ You can enter data in the following fields:
For external calls:
Select On or Off.
The following fields only appear when For
external calls = On.
Suspend ring. from:
Enter the start of the period in 4-digit format.
Suspend ring. until:
Enter the end of the period in 4-digit format.
¤ Press the display key §Save§.
Please note
During this period, you will continue to
receive calls on the desktop phone from
numbers to which you have assigned a
personalised melody in the directory
(VIP).
Silencing the ringer for
anonymous calls
Version 4, 16.09.2005
You can set the desktop phone to not ring
when external callers cannot be identified.
v ¢ Ï Settings ¢ Audio Settings
¢ Ringer Settings ¢ Anon. Call Silencing
If the ringer is silenced for anonymous calls,
then Anon. Call Silencing is marked
with ³.
90
Activating/deactivating the ringer
You can deactivate the ringer on your desktop phone before you answer a call or when
the desktop phone is in idle status; the
ringer can be deactivated permanently or
just for the current call.
The ringer cannot be re-activated while an
external call is in progress.
Deactivating the ringer permanently
*
Press and hold the star key.
ó
The
icon appears in the display.
Reactivating the ringer
*
Press and hold the star key.
Deactivating the ringer for the
current call
§Silence§
Press the display key.
Activating/deactivating alert tones
In place of the ringer, you can activate an
alert tone. When you receive a call, you will
hear a short tone ("Beep") instead of the
ringer.
*
Press and hold the star key and
within 3 seconds:
§Beep§
Press the display key. A call will
now be signalled by one short
alert tone.
ñ appears in the display.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Setting the desktop phone
Activating/deactivating
advisory tones
Your handset uses advisory tones to tell you
about different activities and statuses. The
following advisory tones can be activated/
deactivated independently of each other:
u Key tone: Every key press is confirmed.
u Acknowledge tones:
– Confirmations (ascending tone
sequence): At the end of an entry/setting and when an SMS or a new entry
arrives in the answering machine list
or call list
– Error tone (descending tone
sequence): When you make an incorrect entry
– Menu end tone: When scrolling to the
end of a menu
In idle status:
v ¢ Ï Settings ¢ Audio Settings
¢ Advisory Tones
¤ You can enter data in the following fields:
Key Tones:
Select On or Off.
Confirmation:
Select On or Off.
§Save§
Press the display key.
Activating/deactivating
music on hold
Version 4, 16.09.2005
Music on hold is played e.g., during a call
swap or consultation call to a caller with
whom you are not actively connected.
v ¢ Ï Settings ¢ Audio Settings
¢ Music on hold
¤ Press the display key §OK§ to activate or
deactivate music on hold (³= on).
Using the resource directory
The resource directory manages sounds/
melodies, which you can use as ringers, and
pictures, which you can use as caller pictures
or as screensavers. Prerequisite: Calling Line
Identification (CLIP). The resource directory
can manage the following media types:
Type
Format
Sounds
G.722 raw
Pictures
BMP, JPG,
Non-animated GIF
190 x 144 pixels
240 x 320 pixels
– Caller picture
– Screensaver
Your desktop phone has a variety of default
sounds and pictures.
You can listen to the available sounds and
view the pictures.
You can download pictures and sounds from
a PC (¢ page 107). If there is not enough
capacity available, you must first delete one
or more pictures or sounds.
Viewing caller pictures
v ¢ É ¢ Resource Directory
¢ Screensavers / Caller
Pictures (select entry)
§View§
Press the display key. The
selected picture is displayed.
Switch between pictures using
the q key.
If you have saved a picture in an invalid file
format, you will see an error message after
selecting the entry.
91
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Configuring the system settings
Playing back sounds
v ¢ É ¢ Resource Directory
¢ Sounds ¢ (select entry)
The selected sound is played back immediately. Switch between the sounds using the
q key.
You can adjust the volume during playback:
¤ Adjust the volume using the R / S
keys and press the display key §Save§.
Or:
¤ Open the §Options§ ¢ Volume submenu.
Select the volume using r. Press the display key §Save§.
Deleting/renaming a picture/
sound
You have selected an entry.
§Options§
Open menu.
You can select the following functions:
Delete Entry
The selected entry is deleted.
Rename
Change the name (max. 16 characters)
and press §Save§. The entry is stored with
the new name.
If a picture/sound cannot be deleted, these
options are not available.
Checking the capacity
Version 4, 16.09.2005
You can check how much capacity is available for sounds and pictures.
v ¢ É ¢ Resource Directory
¢ Capacity
92
Configuring the system
settings
You can make the following settings via the
menu on the desktop phone, on a registered
Gigaset SL78H, SL400H, S79H handset or via
the Web configurator on the desktop phone.
The following steps are carried out using the
desktop phone. To same procedure is used
on a Gigaset SL78H, SL400H or S79H handset. Instructions on operating via the desktop phone's Web configurator can be found
in the user guide on the enclosed CD.
Setting the date and time
manually
To ensure you have the correct time for
incoming calls and to use the alarm clock
and calendar, the date and time must be set.
Please note
The address of a time server on the Internet
is stored on your desktop phone. The date
and time are taken from this time server
provided that the desktop phone is connected to the Internet and synchronisation
with the time server is activated. Manual
settings are overwritten in this case.
If the date and time on the desktop phone
have not yet been set, the §Time§ display key
will appear.
§Time§
Press the display key.
Or:
v ¢ Ï Settings ¢ Date/Time
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Configuring the system settings
¤ You can enter data in the following fields:
Date:
Enter day, month and year as an
8-digit number via the keypad
e.g., 4Q
2Q Q
for 14/01/2010.
Time:
Enter the hours and minutes as four digit
numbers via the keypad e.g., QM
5 for 07:15 am.
¤ Press the display key §Save§ to save the settings.
Protecting against
unauthorised access
Protect the desktop phone system settings
with a PIN known only to you. You have to
enter the system PIN if you register or deregister a handset, change local network settings, perform a firmware update or reset the
phone to default settings.
Setting your own area code
To transfer phone numbers (e.g., in vCards),
it is essential that your area code (international and local area code) is saved on the
desktop phone.
Some of these numbers are already preset.
v ¢ Ï Settings ¢ Telephony
¢ Area Codes
Check that the (pre)set area code is correct.
¤ You can enter data in the following fields:
q
Select/change input field.
r
Navigate in the input field.
Ñ
If necessary, delete number:
Press the display key.
~
Enter number.
§Save§
Press the display key.
Example:
Area Codes
International code:
00 - 30
Changing the system PIN
Local area code:
0-[
Version 4, 16.09.2005
You can change the desktop phone's 4-digit
system PIN (default setting: 0000) to a 4-digit
PIN known only by you.
Setting a system PIN facilitates remote operation of the answering machine
(¢ page 71).
v ¢ Ï Settings ¢ System
¢ System PIN
~
Enter the current system PIN if
necessary and press §OK§.
~
Enter new system PIN.
§Save§
Press the display key.
Û
]
Save
Setting the desktop phone's
IP address in LAN
Prerequisite: Your desktop phone is connected to a router or a PC (¢ page 14).
An IP address is required in order for the LAN
to "recognise" your desktop phone.
The IP address can be assigned to the desktop phone automatically (by the router) or
manually.
u If done dynamically, the router's DHCP
server automatically assigns an IP
address to the desktop phone. The desktop phone's IP address can be changed
according to router settings.
93
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Configuring the system settings
u If done manually/statically, you assign a
static IP address to the desktop phone.
This may be necessary depending on
your network configuration (e.g., if your
desktop phone is connected directly to a
PC).
You can also make local network settings via
the Web configurator.
Please note
To assign the IP address dynamically, the
DHCP server on the router must be activated. Please also read the user guide for
your router.
Version 4, 16.09.2005
v ¢ Ï Settings ¢ System
¢ Local Network
~
Enter the system PIN and
press §OK§.
¤ You can enter data in the following fields:
IP Address Type
Select Static or Dynamic.
If you select Static, you must manually
define the IP address and the subnet
mask for the desktop phone in the next
lines, as well as the standard gateway and
DNS server.
IP Address
For IP Address Type Dynamic
The IP address that is currently assigned
to the desktop phone is displayed. It cannot be amended.
For IP Address Type Static
Enter the IP address that is to be assigned
to the desktop phone (overwriting the
current settings).
192.168.2.2 is the default.
Information on the IP address can be
found in the glossary on page 122.
94
Subnet Mask
For IP Address Type Dynamic
The subnet mask that is currently
assigned to the desktop phone is displayed. It cannot be amended.
For IP Address Type Static
Enter the subnet mask to be assigned to
the desktop phone (overwriting the current settings).
The default setting is 255.255.255.0
Information about the IP address can be
found on page 125.
DNS Server
For IP Address Type Static
Enter the IP address for the preferred DNS
server. The DNS server (Domain Name
System) converts the symbolic name of a
server (DNS name) into the public IP
address for the server when the connection is made.
You can specify your router's IP address
here. The router forwards desktop phone
address requests to its DNS server.
192.168.2.1 is the default.
Default Gateway
For IP Address Type Static
Enter the IP address for the standard
gateway through which the local network is connected to the Internet. This is
generally the local (private) IP address for
your router (e.g., 192.168.2.1). Your desktop phone requires this information to
access the Internet.
192.168.2.1 is the default.
¤ Click §Save§ to save the settings.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Configuring the system settings
Setting up/deleting ISDN
phone numbers (MSNs)
Your ISDN connection offers you two telephone lines (B channels) that you can use
simultaneously. You can set up a maximum
of ten separate phone numbers (MSNs) on
your desktop phone. You are assigned these
phone numbers by your network provider.
Please note
There are several ways of assigning an
MSN to ISDN extension systems. For
more information on this topic, refer to
the user guide belonging to your extension system.
Version 4, 16.09.2005
If you have not yet stored all the numbers
with the installation wizard (¢ page 16),
you can enter them now. You can start the
ISDN wizard at any time via the menu to
change the configuration.
All numbers that are stored retrospectively
are automatically assigned to the desktop
phone, all registered handsets and the
answering machine 1 as receive MSNs.
Each new number you set up is automatically given its own ringer, which you can
change individually (page 89).
You can set up, edit and delete MSNs with
the help of the ISDN wizard.
In idle status:
v ¢ Ï Settings ¢ ISDN Wizard
§Yes§
Press the display key to launch
the ISDN wizard.
§OK§
Press the display key to confirm
the info text.
A list of MSNs already set up is then displayed.
§Change§
Press the display key to set up
additional MSNs or modify the
settings for an existing MSN.
Setting up a new MSN
q
Select the row MSN - Name of
an empty MSN entry.
~
Enter MSN name (max. 16 characters) (optional).
s
Jump to the corresponding
MSN - Number line.
~
Enter MSN number (max. 20 digits; without area code = prefix).
¤ Repeat this process for other MSNs, if
required.
¤ Press the display key §Save§ to save the
changes.
Once the ISDN wizard is complete, the connection wizard starts automatically. This
enables you to assign send and receive connections to the desktop phone's internal
parties (¢ page 18).
Changing/deleting an MSN
q
Select the MSN - Name / MSN Number for the MSN entry that
you wish to edit.
Ñ
Delete the previous name/
number.
~
Enter the new MSN name/
number, if required.
¤ Repeat this process for other MSNs, if
required.
¤ Press the display key §Save§ to save the
changes.
If you have deleted both the MSN name and
number and not entered any new values, the
MSN is deleted.
If the MSN you have deleted was the send
connection (page 78) of an internal party
then a new send connection (the MSN with
the lowest ranked number) will automatically be assigned to this internal party.
95
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Configuring the system settings
Assigning send and receive
connections to internal
parties
If you have several MSNs configured for your
telephone system, you can do the following
for each internal party:
u Assign a send connection or allow the
internal party to select the line for each
external call (select line).
u Assign one or several receive connections. Only calls received via the assigned
MSN(s) are signalled on the device.
Assigning a receive connection
Prerequisite: Several phone numbers are
configured for your desktop phone.
v ¢ Ï ¢ Telephony
¢ Send Connections
A list of the internal parties (desktop phone,
handsets, fax machine INT8 – where connected) is displayed.
q
Select the internal parties that
should be assigned a new send
connection and press the display key §OK§.
r
Select at each call or select an
MSN as the send connection.
§Save
Press the display key to save the
changes.
If you select Select at each call, the internal
party can select which MSN is used to establish a connection every time he makes a call.
Assigning receive connections
Prerequisite: Several connections are configured for your desktop phone.
v ¢ Ï ¢ Telephony
¢ Receive Connections
A list of the internal parties (desktop phone,
handsets, local answering machines, fax
machine INT8 – where connected) is displayed.
q
Select the internal parties that
should be assigned new receive
connections and press the display key §OK§.
A list containing all receive connections
(MSN) is opened.
r
Select Yes or No.
s
Change to the next receive connection.
¤ Repeat these two steps for each MSN.
¤ Press the display key §Save§ to save the
changes.
Updating the phone
firmware
Prerequisite: The desktop phone is connected to the Internet (i.e., connected to a
router, ¢ page 14).
If necessary, you can update your desktop
phone's firmware.
The firmware update is downloaded directly
from the Internet by default. The relevant
Web page is preconfigured to your desktop
phone.
Prerequisite:
Version 4, 16.09.2005
The desktop phone is in idle status i.e.,
u no calls are being made.
u There is no internal connection to/
between the registered handsets.
u No handset has the desktop phone menu
open.
96
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Configuring the system settings
Starting the firmware update
manually
v ¢ Ï Settings ¢ System
Update Firmware
Select and press §OK§.
~
Enter the system PIN and
press §OK§.
The desktop phone establishes a connection
to the Internet.
§Yes§
Press the display key to start the
firmware update.
Please note
u The firmware update can take up to
3 minutes.
u When updating from the Internet,
checks are made to ensure that no
newer version of the firmware exists.
If this is not the case, the operation is
terminated and a message is issued to
that effect.
Automatic firmware update
Your desktop phone will check daily
whether a newer firmware update is available from the Internet on the Gigaset configuration server. If firmware updates are available, the notification New firmware available. Update? is displayed on the idle display
of the desktop phone and all registered
handsets and the message key f flashes.
f
Press the message key.
§Yes§
Press the display key to confirm
the prompt.
The firmware is loaded onto your desktop
phone.
Version 4, 16.09.2005
Please note
If the desktop phone is not connected to
the Internet at the time when the check
for new firmware is to be carried out (e.g.,
because the router is deactivated), the
check is carried out as soon as the desktop phone is reconnected to the Internet.
You can deactivate the automatic version
check via the Web configurator.
Activating repeater support
You can increase the range and signal
strength of your desktop phone using a
repeater. You will need to activate repeater
mode. This will terminate any calls that are in
progress at the time.
Prerequisite: Eco mode(+) is deactivated.
v ¢ Ï ¢ System ¢ Repeater Mode
§Change§
Press the display key to activate
or deactivate repeater mode
(³= on).
Please note
u Repeater support and Eco/Eco+
mode (¢ page 74) cancel each
other out i.e., both functions cannot
be used at the same time.
u Switch all registered handsets off and
on again once the repeater has been
activated/deactivated.
Activating/deactivating the
DECT interface
If there are no handsets or repeater registered to the desktop phone, then it is advisable to deactivate the desktop phone's
DECT interface.
v ¢ Ï Settings ¢ System
¢ DECT Interface
§Change§
Press the display key to activate/
deactivate the DECT interface
(³= activated).
If you switch the desktop phone to registration mode (¢ page 78) to reregister handsets/repeater, the DECT interface is automatically reactivated.
97
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / settings.fm / 05.03.2010
Configuring the system settings
Activating/deactivating the
FAX port
You can connect a fax machine to the FAX
port on the telephone. To register the fax
machine to the desktop phone, you must
activate the FAX port.
The FAX port is deactivated by default.
When you activate the FAX port, it is
regarded as registered. The internal number
8 is assigned to it/the connected fax
machine. INT 8 is displayed in the list of
internal parties (even if there is not a fax
machine connected).
v ¢ Ï Settings ¢ System ¢ FAX Port
§Change§
Press the display key to activate/
deactivate the FAX port
(³= on).
To connect a fax machine, please see
page 85
Restoring the desktop phone
to the default settings
The individual settings are reset.
When the settings are restored:
u Date and time are retained
u Handsets are still registered
u The system PIN is not reset.
Version 4, 16.09.2005
In particular, the following are reset to the
default settings:
u The entered MSNs (are deleted)
u The assignment of send and receive connections
u Settings for the ringer melodies and volume levels
u Settings for the local network
u The names of the handsets
u SMS settings (e.g., SMS service centres,)
98
u Eco Mode and Eco Mode+ are deacti-
vated
u PABX connection settings
u Answering machine settings and per-
sonal announcements are deleted
u Function and display key assignment
The following lists are deleted:
u SMS lists
u Call lists
u Answering machine lists
v ¢ Ï ¢ System ¢ Reset
~
If the system-PIN is something
other than 0000:
Enter the current system PIN
and press §OK§.
§Yes§
Press the display key.
Checking the desktop
phone's MAC address
Depending on your network configuration,
you may have to enter your desktop phone
MAC address in your router's access control
list, for example. You can check the MAC
address on the desktop phone.
In idle status:
v *#Q5# 2 Q
The MAC address is displayed.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / PABX.fm / 05.03.2010
Connecting the desktop phone to a PABX
Connecting the desktop
phone to a PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
Please note:
u You cannot send or receive SMS mes-
sages on PABXs that do not support Calling Line Identification.
u There are several ways of assigning an
MSN to ISDN extension systems. For
more information on this topic, please
refer to the user guide belonging to your
extension system.
Saving an access code
(outside line code)
The access code never prefixes numbers
selected from the directory, emergency/
quick dial numbers, SMS service centre numbers and manually dialled numbers.
Transferring a call –
ECT (Explicit Call Transfer)
With some ISDN PABX systems, your two participants are not connected when you
replace the receiver during call transfer
(page 41). In this case, you need to activate
this function (page 38). To do so, please
refer to the operating instructions of your
PABX.
Using Centrex
If your desktop phone is part of a Centrex
system, you can use the following features.
Calling Name Identification (CNI)
Version 4, 16.09.2005
Prerequisite: You may have to enter an
access code in front of the number for external calls in your PABX e.g., "0".
v ¢ Ï ¢ Telephony ¢ Access Code
¤ You can enter data in the following fields:
Access external line with:
Enter or change access code, max. 4 digits.
For:
Calls List
The access code will prefix the numbers
dialled on the desktop phone or a handset from the SMS list, a call list or an
answering machine list.
All Calls
The access code prefixes all numbers
dialled on the desktop phone or a handset.
Off
The access code is deactivated. It does
not prefix any phone number.
§Save§
Press the display key.
When you receive incoming calls from other
Centrex subscribers, the caller's number and
name are shown on the display.
Message Waiting Indication (MWI)
New calls in the call list are indicated using
icons (¢ page 44). The f message key
flashes.
99
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / PABX.fm / 05.03.2010
Connecting the desktop phone to a PABX
Selecting dialling mode/
options
The keypad function allows you to control
certain features by entering sequences of
characters and digits.
The keypad function must be activated
when you connect your desktop phone to
an ISDN PABX or exchange (e.g., Centrex)
that is controlled using keypad protocol. The
digits/characters 0–9, * and # are sent as keypad information elements. Please ask your
service provider about the information and
codes you can transmit.
Setting options
Version 4, 16.09.2005
You can switch between the Auto. Tone Dial,
Auto. Keypad and Dial of * and # settings.
Auto. Tone Dial
Once normal dialling has been activated,
* and # are not transmitted during dialling and if * and # are entered it is not possible to switch to the keypad.
Auto. Keypad
Once * or # have been entered, this setting automatically switches signalling
during dialling to the keypad. This automatic switchover is needed for giving
commands to the exchange or PABX.
Dial of * and #
Once Dial of * and # has been activated,
the * and # characters are transmitted
during dialling as commands to the
exchange or PABX.
100
Regardless of the setting options above,
after dialling or during a call, the phone
automatically switches to tone dialling
(DTMF) e.g., for controlling an answering
machine remotely.
v ¢ Ï Settings ¢ Telephony
¢ Dialling Mode
q
Select setting and press §OK§
e.g., Auto. Tone Dial (³ = on).
Activating/deactivating the
keypad during a call
In addition to the permanent settings
described above, you can also switch temporarily to the keypad.
The setting only applies to the current external call and is automatically deactivated
after the call is ended.
Depending on whether Auto. Keypad is activated, you may need to activate or deactivate Auto. Keypad during the call.
§Options§
Open menu.
Auto. Keypad
Select and press §OK§ (³ = on).
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Customer Service & Assistance
Customer Service & Assistance
Do you have any questions? As a Gigaset customer, you can find help quickly in this User Manual
and in the service section of our Gigaset online portal www.gigaset.com/service.
Please register your phone online right after purchase.
This enables us to provide you with even better service regarding questions or a warranty claim.
In order to contact our customer service via email, please use the email contact form from our
Gigaset online portal after selecting your home country.
Our representatives are also available on the telephone hotlines for consultation.
Version 4, 16.09.2005
Australia . . . . . . . . . . . . . . . . . . . . . . 1300 780 878
Austria. . . . . . . . . . . . . . . . . . . . . 0043 1 311 3046
Bahrain . . . . . . . . . . . . . . . . . . . . . 97 31 73 11 173
Belgium . . . . . . . . . . . . . . . . . . . . . . .0 78 15 66 79
Bosnia Herzegovina . . . . . . . . . . . . .033 276 649
Brazil . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4003 3020
(grandes cidades e regiões metropolitanas Custo de uma ligao local)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0800 888 3020
(demais localidades - Gratuito)
Bulgaria. . . . . . . . . . . . . . . . . . . . .+359 2 9710666
(0.50 евро на минута от всички държави за
стационарни телефони.За обаждания от
мобилни цени може да има други цени)
Canada . . . . . . . . . . . . . . . . . . . . . 1-866 247-8758
China . . . . . . . . . .0 21 400 670 6007 (RMB 0.11)
Croatia. . . . . . . . . . . . . . . . 01 2456 555 (0,23 Kn)
Czech Republic. . . . . . . . . . . . +420 23303 2727
Denmark. . . . . . . . . . . . . . . . . +45 (0) 35 25 86 00
Finland . . . . . . . . . . . . . . . . . . . . . . . 09 231 134 25
France . . . . . . . . . . . . . . . . . . . . . +33 170 706 181
Coût d’un appel local depuis une ligne fixe
France Télécom.
Germany. . . . . . . . . . . . . . . . . . . . . 01805 333 222
Der Anruf kostet Sie aus den deutschen Festnetzen 0,14 € pro Minute. Die Preise für Anrufe
aus den deutschen Mobilfunknetzen können
hiervon abweichen; ab dem 1.3.2010 betragen
sie höchstens 0,42 € pro Minute.
Greece . . . . . . . . . . . . . . . . . . . . . . . . 801-1000 500
(Χρέωση 0,0026 € το λεπτό για το σταθερό
δίκτυο της Ελλάδας. Για κλήσεις από κινητό
ίσως ισχύουν άλλες χρεώσεις)
Hong Kong . . . . . . . . . . . . . . . . . . . . . . 2763 0203
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2389 7285
Hungary . . . . . . . . . . . . . . .06 14 71 24 44 (27 Ft)
India . . . . . . . . . . . . . . . . . . . . .Please refer to your
. . . . . . . . . . . . . . . . . . . . . . . . . . local warranty card
Indonesia . . . . . . . . . . . . . . . . . . .(62-21) 5673813
. . . . . . . . . . . . . . . . . . . . . . . . . . (62-21) 888856000
Ireland . . . . . . . . . . . . . . . . . . . . . . . 18 50 77 72 77
Italy . . . . . . . . . . . . . . . . . . . . . . . . . . . 199.15.11.15
(€ cent 8,36 + IVA al minuto da telefono fisso
della rete Telecom Italia senza scatto alla risposta mentre per le chiamate effettuate attraverso la rete di altri operatori fissi o mobili consultate le tariffe del vostro operatore)
Jordan . . . . . . . . . . . . . . . . 00962 6 5625460/1/2
Kuwait . . . . . . . . . . . . . . . . . . . . . . 00965-2464993
Lebanon . . . . . . . . . . . . . . . . . . . . 00961-1236110
Luxembourg . . . . . . . . . . . . . . . +352 8002 3811
Malaysia . . . . . . . . . . . . . . . . . . . +603-8076 9696
Malta . . . . . . . . . . . . . .+390 2360 46789 (0,10 €)
Mexico
. . . .01800 999 4442738 (01800 999 GIGASET)
Netherlands . . . . . . . . . . . . . . . . . . 0900-3333102
(0,25 € per minuut (vast net). Voor oproepen uit
het mobiele netwerk kunnen andere prijzen
gelden.)
New Zealand . . . . . . . . . . . . . . . . . . 0800 780 878
Norway . . . . . . . . . . . . . . . . . . . . . . . . . 22 70 84 00
(Oppstartskost 89 øre + 15 øre pr minutt fra
fasttelefon linje. For samtaler fra mobil vil det
gjelde egne priser.)
Oman . . . . . . . . . . . . . . . . . . . . . . . 96 82 47 09 281
Poland . . . . . . . . . . . . . . . . . . . . . . . .0 801 140 160
Portugal . . . . . . . . . . . . . . . . . . (351) 808 781 223
(custo de uma chamada local)
Romania . . . . . . . . . . . . . . . . . . +40 021 204 9130
Russia . . . . . . . . . . . . . . . . . . . . . . .8 (495) 2281312
Serbia. . . . . . . . . . . . . . . . . . . . . . . . . 0800 222 111
Singapore . . . . . . . . . . . . . . . . . . . . . . . . 6735 9100
Slovak Republic . . . . 02 59 68 22 66 (4,428 sk)
Slovenija . . . . . . . . . . . . . . . . . . . . . . 0 14 74 63 36
South Africa . . . . . . . . . . . . . . . . +2711 46 13 181
Spain . . . . . . . . . . . . . . . . . . . . . . . . . . . 902 103935
Sweden . . . . . . . . . . . . . . . . . . . . . . . .08-750 99 11
Switzerland . . . . . . . . . . . . . . . . . . . 0848 212 000
Taiwan . . . . . . . . . . . . . . . . . . . . . . . . 02 266 24343
Turkey . . . . . . . . . . . . . . . . . . . . . . 0216 459 98 59
Ukraine . . . . . . . . . . . . . . . . . +380-44-451-71-72
United Arab Emirates . . . . . . . . . . 0 43 66 03 86
United Kingdom. . . . . . . . . . . . 0 84 53 67 08 12
USA . . . . . . . . . . . . . . . . . . . . . . . . . 1-866 247-8758
Vietnam. . . . . . . . . . . . . . . . . . . . . . . 1900 545 416
Please have your record of purchase ready when calling.
Replacement or repair services are not offered in countries where our product is not sold by
authorised dealers.
101
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Customer Service & Assistance
Questions and answers
If you have any queries about the use of your
desktop phone, visit our website at
www.gigaset.com/customercare
for assistance 24/7. The table below contains
a list of common problems and possible
solutions.
Registration or connection problems with a
Bluetooth headset.
¥
¥
Reset the Bluetooth headset (see the user
guide for your headset).
Delete registration data from the desktop
phone when deregistering the device
(
page 84).
Repeat the registration process
(
page 82).
¢
¥
¢
The display is blank.
1. The desktop phone is not connected to mains
power supply.
Check the mains connection
(
page 13).
¥
¢
¢
2. The backlight is deactivated because a time
page 88).
control was activated (
Press any key on the desktop phone to
temporarily activate the display backlight.
Or:
Deactivate the time control (
page 88).
¥
¥
¢
No connection between the desktop phone and
handset.
1. Handset is out of the range of the desktop
phone.
Move the handset closer to the desktop
phone.
¥
2. Range of the desktop phone has been
reduced as Eco mode is active.
Deactivate Eco Mode (page 74) or reduce
the distance between the handset and the
desktop phone.
¥
3. The handset has not been registered to the
desktop phone or was deregistered due to the
registration of an additional handset (more
than 6 DECT registrations).
Register the handset with the desktop
phone (
page 78).
¥
¢
¥
4. The firmware is currently being updated.
Please wait until the update is complete.
¥
5. Desktop phone is not switched on.
Check the power adapter for the desktop
phone (page 12).
The desktop phone does not ring.
¥
1. The ringer is deactivated.
Activate the ringer (page 90).
¥
2. Call divert set for "All Calls".
Deactivate call divert (page 37).
3. The MSN, on which the call is received, is not
assigned to the desktop phone as a receive
connection.
Change the assignment of receive connections (page 78).
¥
The display shows "Please check phone connection".
Connector to the telephone network may not be
plugged in.
Check the telephone connection
(
page 12).
¥
¢
You cannot hear a ringer/dialling tone from the
fixed line network.
The supplied phone cable is not being used or
the phone cable may be faulty.
Replace the phone cable.
¥
Version 4, 16.09.2005
Handset does not ring after setting up the ISDN
phone number (MSN).
¥
The area code has been stored with the MSN.
Save MSN without area code.
102
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Customer Service & Assistance
Some of the ISDN functions do not work as
specified.
¥
ISDN functions are not enabled.
Check with your network provider.
Error tone sounds after system PIN prompt.
¥
You have entered the wrong system PIN.
Repeat input of system PIN.
The other party cannot hear you.
You have pressed the mute button P.
The desktop phone is "muted".
Unmute the microphone (page 36).
¥
The number of the caller is not displayed
despite CLIP.
¥
Calling Line Identification is not enabled.
The caller should ask the network provider to
enable Calling Line Identification (CLI).
You hear an error tone when keying in information (a descending tone sequence).
¥
Action has failed/invalid input.
Repeat the process.
Watch the display and refer to the user guide
if necessary.
No time is specified for a message in the call list.
¥
¥
Date and time have not been set.
Set the date/time.
Activate desktop phone synchronisation with
a time server on the Internet via the Web configurator.
The answering machine announces "PIN is
incorrect" during remote operation.
¥
You have entered the wrong system PIN.
Repeat input of system PIN.
The answering machine is not recording any
messages/has switched to answer only mode.
¥
¥
Version 4, 16.09.2005
Its memory is full.
Delete old messages.
Play back new messages and delete.
The integrated answering machine will not
record a conversation or interrupts the recording.
The display shows AM memory full - Delete messages.
The answering machine's memory is full.
Use a registered handset to delete messages
and restart two-way record.
Or:
End the call, delete old messages on the
answering machine and then re-establish the
connection.
¥
¥
A firmware update is not being carried out.
1. If Currently not possible is displayed, download/update is already being carried out.
Repeat the process at a later date.
¥
2. If File unreadable is displayed, the firmware
file may be invalid.
Use only the firmware available on the preconfigured Gigaset configuration server.
¥
3. If No connection to VoIP provider is displayed, the download server may not be
accessible.
The server is currently not accessible.
Repeat the process at a later date.
You have changed the preconfigured
server address. Correct the address. Reset
the desktop phone, if necessary.
¥
¥
4. If Transmission error XXX is displayed, an
error has occurred during the transmission of
the file. An HTTP error code is displayed for
XXX.
Repeat the process. If the error occurs
again, consult the Service department.
¥
5. If Check IP settings is displayed, your desktop
phone may not be connected to the Internet.
Check the cable connections between the
desktop phone and router and between
the router and the Internet.
Check whether the desktop phone is connected to the LAN i.e., it can be reached at
its IP address.
¥
¥
103
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Customer Service & Assistance
You cannot establish a connection to the desktop phone with your PC's Web browser.
¥
¥
¥
When establishing a connection, check the
desktop phone's local IP address that has
been entered. You can check the IP address
on your desktop phone (page 93).
Check the connections between the PC and
the desktop phone. Transmit a ping command to your desktop phone e.g., from your
PC (ping <desktop phone's local IP address>).
You have tried to reach the desktop phone via
a secure http (https://...). Try again with
http://....
Exclusion of liability
Some displays may contain pixels (picture elements), which remain activated
or deactivated. As a pixel is made up of
three sub-pixels (red, green, blue), it is
possible that pixel colours may vary.
This is completely normal and does not
indicate an error.
Version 4, 16.09.2005
Checking service information
If you contact Customer Services, you may
need the desktop phone's service information.
Prerequisite: You have dialled or you are
already making an external call. The connection has been established for at least 8 seconds.
§Options§ ¢ Service Info
Confirm selection with §OK§.
The following information/functions can be
selected with q:
1:
Desktop phone serial number
(RFPI)
2:
Not in use: - - 3:
Informs the service employees
of the desktop phone settings
(in hex diagram) e.g., the
number of registered handsets,
repeater mode. The last 4 digits
indicate the number of operating hours (hexadecimal).
104
4:
Variant (digits 1 to 4),
Telephone firmware version
(digits 5 to 6).
6:
Device number of the desktop
phone. This contains additional
information for the service
employer.
Unlock System
Confirm selection with §OK§.
If necessary you can unlock a
provider-specific device lock
with a corresponding code.
Send configuration
Select this option only if you are
requested to do so by the Service employee.
Authorisation
This device is intended for the ISDN telephone connection in your network.
Country-specific requirements have been
taken into consideration.
We, Gigaset Communications GmbH,
declare that this device meets the essential
requirements and other relevant regulations
laid down in Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address:
www.gigaset.com/docs
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Protecting our environment
Protecting our
environment
Our environmental mission
statement
We, Gigaset Communications GmbH, bear
social responsibility and are actively committed to a better world. Our ideas, technologies and actions serve people, society and
the environment. The aim of our global
activity is to secure sustainable life resources
for humanity. We are committed to a responsibility for our products that comprises their
entire life cycle. The environmental impact
of products, including their manufacture,
procurement, distribution, use, service and
disposal, are already evaluated during product and process design.
Further information on environmentally
friendly products and processes is available
on the Internet at www.gigaset.com.
Disposal
All electrical and electronic equipment must
be disposed of separately from general
household waste using the sites designated
by local authorities.
If a product displays this
symbol of a crossed-out
rubbish bin, the product is
subject to European Directive 2002/96/EC.
The appropriate disposal
and separate collection of
used equipment serve to prevent potential
harm to the environment and to health.
They are a prerequisite for the re-use and
recycling of used electrical and electronic
equipment.
For further information on disposing of your
used equipment, please contact your local
authority, your refuse collection service or
the dealer you purchased the product from.
Appendix
Environmental management
system
Gigaset Communications
GmbH is certified pursuant
to the international standards EN 14001 and
ISO 9001.
ISO 14001 (Environment): Certified since
September 2007 by TüV SÜD Management
Service GmbH.
ISO 9001 (Quality): Certified since 17/02/
1994 by TüV SÜD Management Service
GmbH.
Caring for your telephone
¤ Wipe the desktop phone with a damp
cloth (do not use solvent) or an antistatic
cloth.
Never use a dry cloth as this can cause static.
Using insert strips
Blank insert strips for the function keys can
be found on the enclosed CD.
Ecological energy consumption
Version 4, 16.09.2005
The use of ECO DECT (¢ page 74) saves
energy and makes an active contribution
towards protecting the environment.
105
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
Specifications
Writing and editing text
Power consumption of the desktop
phone
In idle status
Approx. 3.6 W
During a call
Approx. 4.3 W
Version 4, 16.09.2005
General specifications
Interfaces
ISDN, Ethernet, Bluetooth
DECT standard
Is supported
GAP standard
Is supported
No. of channels
60 duplex channels
Radio frequency
range
1880–1900 MHz
Duplex method
Time multiplex, 10 ms frame
length
Channel grid
1728 kHz
Bit rate
1152 kbit/s
The following rules apply when writing text:
u Each key between Q and O is
assigned several letters and characters.
u Control the cursor with u v t s.
Press and hold u or v to move the cursor word by word.
u Characters are inserted to the left of the
cursor.
u Press the star key * to display the table
of special characters. Select the required
character and press the display key §Insert§
to insert the character at the cursor position.
u Press and hold Q to O to enter digits.
u Press display key Ñ to delete the character to the left of the cursor. Press and
hold to delete the word to the left of the
cursor.
u The first letter of the name of directory
entries is automatically capitalised, followed by lower case letters.
Modulation
GFSK
Language code
32 kbit/s
Transmission
power
10 mW, average power
per channel
Repeatedly press the hash key # to
change the text input mode.
Range (handsets)
Up to 300 m outdoors,
up to 50 m indoors
123
Writing digits
Power supply
230 V ~/50 Hz
Abc
Upper case *
Environmental
conditions in
operation
+5°C to +45°C, 20% to
75% relative humidity
abc
Lower case
Codecs
G.726 – internal narrowband
G.711 – ISDN
G.722 – internal wideband
The active mode is indicated at the bottom
right of the screen.
Protocols
DECT, GAP, DHCP,
NAT Traversal (STUN), HTTP
106
Setting upper/lower case or digits
First letter in capitals, all others in lower case
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
Writing an SMS/name
Press the relevant key several times to enter
letters/characters.
¤ Enter the individual letters/characters by
pressing the corresponding key.
The characters assigned to the key are
shown in a selection line at the bottom left
of the screen. The selected character is highlighted.
¤ Briefly press the key several times in succession to select the required letter/character.
If you press and hold the key, the corresponding digit is inserted.
Standard characters
2
3
4
5
L
M
N
O
Q
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x
1)
2)
1
a b c 2 ä á à â ã ç
d e f 3 ë é è ê
g h i 4 ï
í
ì
î
j k l 5
m n o 6 ö ñ ó ò ô õ
p q r s 7 ß
t u v 8 ü ú ù û
w x y z 9 ÿ ý æ ø å
.
, ? ! 0
Version 4, 16.09.2005
1) Space
2) Line break
Using Gigaset QuickSync –
additional functions for the
PC interface
You can connect your desktop phone to
your computer via Bluetooth (page 82) or
via the Ethernet cable supplied. To use the
Bluetooth connection, your PC must be
equipped with a suitable dongle.
The "Gigaset QuickSync" program must be
installed on your PC so it can communicate
with the desktop phone. The program can
be found on the enclosed CD.
Please note
u If the Ethernet cable is plugged in, it is
not possible to establish a Bluetooth
connection.
u If the enclosed Ethernet cable is
plugged in while a Bluetooth connection is established, the Bluetooth connection is cancelled.
Transferring data
You can:
u Synchronise your desktop phone directory with Outlook
u Download caller pictures (.bmp) from the
PC to the desktop phone
u Download pictures (.bmp) as a screensaver from the PC to the desktop phone
u Download sounds (ringer melodies) from
the PC to the desktop phone
During the transfer of data between the
desktop phone and PC, a message to that
effect is shown on the display. During this
time the keypad is disabled, and incoming
calls are ignored.
107
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
Using Open Source software
contained in the product
Small Parts Dispatch Com Bocholt
E-mail: kleinteileversand.com@gigaset.com
Version 4, 16.09.2005
Fax:
The firmware for your Gigaset phone
includes integrated Open Source licensed
software from third-party providers. These
integrated Open Source software files are
protected by copyright. Rights of use for this
Open Source software that extend beyond
the pure scope of the program execution
intended by Gigaset Communications
GmbH are stipulated in the license conditions for the Open Source software.
If these rights of use are observed, then the
Open Source software can be used as the
license intended. Conflicts may arise
between the license conditions from Gigaset
Communications GmbH and the Open
Source software license conditions. In such
cases, the Open Source software license conditions have priority for the relevant Open
Source parts of the software. You will find
the licence text in its original English version
on the pages that follow. The license conditions are also available at the following website:
http://www.gigaset.com/opensource/
If the programs contained in this product are
licensed as part of the GNU General Public
License (GPL), GNU Lesser General Public
License (LGPL) or another Open Source software license that requires the disclosure of
the source code and the product does not
contain software in source code format, then
the source code and copyright information
relating to this software can be downloaded
from the following Internet site:
http://www.gigaset.com/opensource/
The corresponding source code can be
requested from Gigaset Communications
GmbH, but this will incur a EUR 10 processing charge for the provision. This request can
be made within three years from the date of
purchase. Please enclose a receipt with the
date of purchase, the ID number (MAC ID) for
the product and the version number for the
device firmware installed and send to the
following address:
108
0049 2871 / 91 30 29
Warranty for other uses of the Open
Source software
Gigaset Communications GmbH does not
provide any warranty for Open Source software contained in this product, should it be
used for purposes other than those
intended by Gigaset Communications
GmbH for the execution of the program. The
licenses listed below define the warranty
insofar as intended by the authors and licensors for the Open Source software. Gigaset
Communications GmbH shall not accept liability for damage occurring through
changes to an Open Source software program or product configuration. Furthermore, Gigaset Communications GmbH shall
not accept liability in the event of copyright
infringement by third parties relating to the
Open Source software.
Technical support will only be provided, if
necessary, for the software in its unchanged
original condition.
Open Source Software included in the
delivery
This product contains software developed
by the University of California, Berkeley, and
its associates.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
GNU General Public License
(GPL)
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 021111307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to
take away your freedom to share and change it. By
contrast, the GNU General Public License is
intended to guarantee your freedom to share and
change free software – to make sure the software
is free for all its users. This General Public License
applies to most of the Free Software Foundation's
software and to any other program whose authors
commit to using it. (Some other Free Software
Foundation software is covered by the GNU Lesser
General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring
to freedom, not price. Our General Public Licenses
are designed to make sure that you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you
receive source code or can get it if you want it, that
you can change the software or use pieces of it in
new free programs; and that you know you can do
these things.
Version 4, 16.09.2005
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights
or to ask you to surrender the rights. These restrictions translate into certain responsibilities for you
if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give
the recipients all the rights that you have. You
must make sure that they, too, receive or can get
the source code. And you must show them these
terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license
which gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we
want to make certain that everyone understands
that there is no warranty for this free software. If
the software is modified by someone else and
passed on, we want its recipients to know that
what they have is not the original, so that any
problems introduced by others will not reflect on
the original authors' reputations.
Finally, any free program is threatened constantly
by software patents. We wish to avoid the danger
that redistributors of a free program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have
made it clear that any patent must be licensed for
everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution
and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other
work which contains a notice placed by the copyright holder saying it may be distributed under
the terms of this General Public License. The "Program", below, refers to any such program or work,
and a "work based on the Program" means either
the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with
modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each
licensee is addressed as "you".
Activities other than copying, distribution and
modification are not covered by this License; they
are outside its scope. The act of running the Program is not restricted, and the output from the
Program is covered only if its contents constitute a
work based on the Program (independent of having been made by running the Program). Whether
that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of
the Program's source code as you receive it, in any
medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this License
and to the absence of any warranty; and give any
other recipients of the Program a copy of this
License along with the Program.
109
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
You may charge a fee for the physical act of transferring a copy, and you may, at your discretion,
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work
based on the Program, and copy and distribute
such modifications or work under the terms of
Section 1 above, provided that you also meet all of
these conditions:
a) You must cause the modified files to carry
prominent notices stating that you changed
the files and the date of any change.
b) You must cause any work that you distribute
or publish, that in whole or in part contains or
is derived from the Program or any part
thereof, to be licensed as a whole at no charge
to all third parties under the terms of this
License.
c) If the modified program normally reads
commands interactively when run, you must
cause it, when running is commenced for such
interactive use in the most ordinary way, to
print or display an announcement including
an appropriate copyright notice and a notice
that there is no warranty (or else, saying that
you provide a warranty) and that users may
redistribute the program under these conditions, and telling the user how to view a copy
of this License. (Exception: if the Program itself
is interactive but does not normally print such
an announcement, your work based on the
Program is not required to print an announcement.)
Version 4, 16.09.2005
These requirements apply to the modified work as
a whole. If identifiable sections of that work are
not derived from the Program, and can be reasonably considered independent and separate works
in themselves, then this License, and its terms, do
not apply to those sections when you distribute
them as separate works. But when you distribute
the same sections as part of a whole which is a
work based on the Program, the distribution of
the whole must be on the terms of this License,
whose permissions for other licensees extend to
the entire whole, and thus to each and every part
regardless of who wrote it. Thus, it is not the intent
of this section to claim rights or contest your
rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on
the Program.
110
In addition, mere aggregation of another work not
based on the Program with the Program (or with a
work based on the Program) on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may copy and distribute the Program (or a
work based on it, under Section 2) in object code
or executable form under the terms of Sections 1
and 2 above, provided that you also do one of the
following:
a) Accompany it with the complete corresponding machine-readable source code,
which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for
at least three years, to give any third party, for
a charge no more than your cost of physically
performing source distribution, a complete
machine-readable copy of the corresponding
source code, to be distributed under the terms
of Sections 1 and 2 above on a medium customarily used for software interchange; or,
c) Accompany it with the information you
received as to the offer to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution
and only if you received the program in object
code or executable form with such an offer, in
accord with Subsection b above.)
The source code for a work means the preferred
form of the work for making modifications to it.
For an executable work, complete source code
means all the source code for all modules it contains, plus any associated interface definition files,
plus the scripts used to control compilation and
installation of the executable. However, as a special exception, the source code distributed need
not include anything that is normally distributed
(in either source or binary form) with the major
components (compiler, kernel, and so on) of the
operating system on which the executable runs,
unless that component itself accompanies the
executable.
If distribution of executable or object code is
made by offering access to copy from a designated place, then offering equivalent access to
copy the source code from the same place counts
as distribution of the source code, even though
third parties are not compelled to copy the source
along with the object code.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided
under this License. Any attempt otherwise to
copy, modify, sublicense or distribute the Program
is void, and will automatically terminate your
rights under this License. However, parties who
have received copies, or rights, from you under
this License will not have their licenses terminated
so long as such parties remain in full compliance.
5. You are not required to accept this License,
since you have not signed it. However, nothing
else grants you permission to modify or distribute
the Program or its derivative works. These actions
are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing
the Program (or any work based on the Program),
you indicate your acceptance of this License to do
so, and all its terms and conditions for copying,
distributing or modifying the Program or works
based on it.
6. Each time you redistribute the Program (or any
work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not
impose any further restrictions on the recipients'
exercise of the rights granted herein. You are not
responsible for enforcing compliance by third parties to this License.
Version 4, 16.09.2005
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are
imposed on you (whether by court order, agreement or otherwise) that contradict the conditions
of this License, they do not excuse you from the
conditions of this License. If you cannot distribute
so as to satisfy simultaneously your obligations
under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the
only way you could satisfy both it and this License
would be to refrain entirely from distribution of
the Program.
If any portion of this section is held invalid or
unenforceable under any particular circumstance,
the balance of the section is intended to apply
and the section as a whole is intended to apply in
other circumstances.
It is not the purpose of this section to induce you
to infringe any patents or other property right
claims or to contest validity of any such claims;
this section has the sole purpose of protecting the
integrity of the free software distribution system,
which is implemented by public license practices.
Many people have made generous contributions
to the wide range of software distributed through
that system in reliance on consistent application
of that system; it is up to the author/donor to
decide if he or she is willing to distribute software
through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear
what is believed to be a consequence of the rest of
this License.
8. If the distribution and/or use of the Program is
restricted in certain countries either by patents or
by copyrighted interfaces, the original copyright
holder who places the Program under this License
may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not
thus excluded. In such a case, this License incorporates the limitation as if written in the body of this
License.
9. The Free Software Foundation may publish
revised and/or new versions of the General Public
License from time to time. Such new versions will
be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.
Each version is given a distinguishing version
number. If the Program specifies a version number
of this License which applies to it and "any later
version", you have the option of following the
terms and conditions either of that version or of
any later version published by the Free Software
Foundation. If the Program does not specify a version number of this License, you may choose any
version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program
into other free programs whose distribution conditions are different, write to the author to ask for
permission. For software which is copyrighted by
the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the
two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
111
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE PROGRAM IS WITH
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE
THE PROGRAM (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Programs
Version 4, 16.09.2005
If you develop a new program, and you want it to
be of the greatest possible use to the public, the
best way to achieve this is to make it free software
which everyone can redistribute and change
under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each
source file to most effectively convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full
notice is found.
112
<one line to give the program's name and a
brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the
GNU General Public License as published by the
Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
This program is distributed in the hope that it
will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License along with this program; if not,
write to the Free Software Foundation, Inc., 59
Temple Place, Suite 330, Boston, MA 02111-1307
USA
Also add information on how to contact you by
electronic and paper mail.
If the program is interactive, make it output a
short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) <year>
<name of author>
Gnomovision comes with ABSOLUTELY NO
WARRANTY; for details type `show w'. This is
free software, and you are welcome to redistribute it under certain conditions; type `show c' for
details.
The hypothetical commands `show w' and `show
c' should show the appropriate parts of the General Public License. Of course, the commands you
use may be called something other than `show w'
and `show c'; they could even be mouse-clicks or
menu items – whatever suits your program.
You should also get your employer (if you work as
a programmer) or your school, if any, to sign a
"copyright disclaimer" for the program, if necessary.
Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright
interest in the program `Gnomovision' (which
makes passes at compilers) written by James
Hacker.
<signature of Ty Coon>, 1 April 1989, Ty Coon,
President of Vice
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
This General Public License does not permit incorporating your program into proprietary programs.
If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the library. If this is what
you want to do, use the GNU Lesser General Public
License instead of this License.
GNU Lesser General Public
License (LGPL)
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 021111307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL.
It also counts as the successor of the GNU Library
Public License, version 2, hence the version
number 2.1.]
Version 4, 16.09.2005
Preamble
The licenses for most software are designed to
take away your freedom to share and change it. By
contrast, the GNU General Public Licenses are
intended to guarantee your freedom to share and
change free software--to make sure the software
is free for all its users.
This license, the Lesser General Public License,
applies to some specially designated software
packages – typically libraries – of the Free Software Foundation and other authors who decide to
use it. You can use it too, but we suggest you first
think carefully about whether this license or the
ordinary General Public License is the better strategy to use in any particular case, based on the
explanations below.
When we speak of free software, we are referring
to freedom of use, not price. Our General Public
Licenses are designed to make sure that you have
the freedom to distribute copies of free software
(and charge for this service if you wish); that you
receive source code or can get it if you want it; that
you can change the software and use pieces of it
in new free programs; and that you are informed
that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these
rights or to ask you to surrender these rights.
These restrictions translate into certain responsibilities for you if you distribute copies of the
library or if you modify it.
For example, if you distribute copies of the library,
whether gratis or for a fee, you must give the
recipients all the rights that we gave you. You
must make sure that they, too, receive or can get
the source code. If you link other code with the
library, you must provide complete object files to
the recipients, so that they can relink them with
the library after making changes to the library and
recompiling it. And you must show them these
terms so they know their rights.
We protect your rights with a two-step method:
(1) we copyright the library, and (2) we offer you
this license, which gives you legal permission to
copy, distribute and/or modify the library.
To protect each distributor, we want to make it
very clear that there is no warranty for the free
library. Also, if the library is modified by someone
else and passed on, the recipients should know
that what they have is not the original version, so
that the original author's reputation will not be
affected by problems that might be introduced by
others.
Finally, software patents pose a constant threat to
the existence of any free program. We wish to
make sure that a company cannot effectively
restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore,
we insist that any patent license obtained for a
version of the library must be consistent with the
full freedom of use specified in this license.
Most GNU software, including some libraries, is
covered by the ordinary GNU General Public
License. This license, the GNU Lesser General Public License, applies to certain designated libraries,
and is quite different from the ordinary General
Public License. We use this license for certain
libraries in order to permit linking those libraries
into non-free programs.
When a program is linked with a library, whether
statically or using a shared library, the combination of the two is legally speaking a combined
work, a derivative of the original library. The ordinary General Public License therefore permits
such linking only if the entire combination fits its
criteria of freedom. The Lesser General Public
License permits more lax criteria for linking other
code with the library.
We call this license the "Lesser" General Public
License because it does less to protect the user's
freedom than the ordinary General Public License.
It also provides other free software developers
less of an advantage over competing non-free
programs. These disadvantages are the reason we
use the ordinary General Public License for many
libraries. However, the Lesser license provides
advantages in certain special circumstances.
113
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
Version 4, 16.09.2005
For example, on rare occasions, there may be a
special need to encourage the widest possible use
of a certain library, so that it becomes a de-facto
standard. To achieve this, non-free programs must
be allowed to use the library. A more frequent
case is that a free library does the same job as
widely used non-free libraries. In this case, there is
little to gain by limiting the free library to free software only, so we use the Lesser General Public
License.
In other cases, permission to use a particular
library in non-free programs enables a greater
number of people to use a large body of free software. For example, permission to use the GNU C
Library in non-free programs enables many more
people to use the whole GNU operating system, as
well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less
protective of the users' freedom, it does ensure
that the user of a program that is linked with the
Library has the freedom and the wherewithal to
run that program using a modified version of the
Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on
the library" and a "work that uses the library". The
former contains code derived from the library,
whereas the latter must be combined with the
library in order to run.
GNU LESSER GENERAL PUBLIC
LICENSE
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any software
library or other program which contains a notice
placed by the copyright holder or other authorized party saying it may be distributed under the
terms of this Lesser General Public License (also
called "this License"). Each licensee is addressed as
"you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which
use some of those functions and data) to form
executables.
The "Library", below, refers to any such software
library or work which has been distributed under
these terms. A "work based on the Library" means
either the Library or any derivative work under
copyright law: that is to say, a work containing the
Library or a portion of it, either verbatim or with
modifications and/or translated straightforwardly
into another language. (Hereinafter, translation is
included without limitation in the term "modification".)
"Source code" for a work means the preferred
form of the work for making modifications to it.
For a library, complete source code means all the
source code for all modules it contains, plus any
associated interface definition files, plus the
scripts used to control compilation and installation of the library.
Activities other than copying, distribution and
modification are not covered by this License; they
are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the
Library does and what the program that uses the
Library does.
1. You may copy and distribute verbatim copies of
the Library's complete source code as you receive
it, in any medium, provided that you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to
this License and to the absence of any warranty;
and distribute a copy of this License along with
the Library.
114
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
Version 4, 16.09.2005
You may charge a fee for the physical act of transferring a copy, and you may at your option offer
warranty protection in exchange for a fee.
2. You may modify your copy or copies of the
Library or any portion of it, thus forming a work
based on the Library, and copy and distribute such
modifications or work under the terms of Section
1 above, provided that you also meet all of these
conditions:
a) The modified work must itself be a software
library.
b) You must cause the files modified to carry
prominent notices stating that you changed
the files and the date of any change.
c) You must cause the whole of the work to be
licensed at no charge to all third parties under
the terms of this License.
d) If a facility in the modified Library refers to a
function or a table of data to be supplied by an
application program that uses the facility,
other than as an argument passed when the
facility is invoked, then you must make a good
faith effort to ensure that, in the event an
application does not supply such function or
table, the facility still operates, and performs
whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely
well-defined independent of the application.
Therefore, Subsection 2d requires that any
application-supplied function or table used by
this function must be optional: if the application does not supply it, the square root function must still compute square roots.)
These requirements apply to the modified work as
a whole. If identifiable sections of that work are
not derived from the Library, and can be reasonably considered independent and separate works
in themselves, then this License, and its terms, do
not apply to those sections when you distribute
them as separate works. But when you distribute
the same sections as part of a whole which is a
work based on the Library, the distribution of the
whole must be on the terms of this License, whose
permissions for other licensees extend to the
entire whole, and thus to each and every part
regardless of who wrote it.
Thus, it is not the intent of this section to claim
rights or contest your rights to work written
entirely by you; rather, the intent is to exercise the
right to control the distribution of derivative or
collective works based on the Library.
In addition, mere aggregation of another work not
based on the Library with the Library (or with a
work based on the Library) on a volume of a stor-
age or distribution medium does not bring the
other work under the scope of this License.
3. You may opt to apply the terms of the ordinary
GNU General Public License instead of this License
to a given copy of the Library. To do this, you must
alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public
License, version 2, instead of to this License. (If a
newer version than version 2 of the ordinary GNU
General Public License has appeared, then you
can specify that version instead if you wish.) Do
not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This
option is useful when you wish to copy part of the
code of the Library into a program that is not a
library.
4. You may copy and distribute the Library (or a
portion or derivative of it, under Section 2) in
object code or executable form under the terms of
Sections 1 and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be
distributed under the terms of Sections 1 and 2
above on a medium customarily used for software
interchange.
If distribution of object code is made by offering
access to copy from a designated place, then
offering equivalent access to copy the source
code from the same place satisfies the requirement to distribute the source code, even though
third parties are not compelled to copy the source
along with the object code.
5. A program that contains no derivative of any
portion of the Library, but is designed to work
with the Library by being compiled or linked with
it, is called a "work that uses the Library". Such a
work, in isolation, is not a derivative work of the
Library, and therefore falls outside the scope of
this License.
However, linking a "work that uses the Library"
with the Library creates an executable that is a
derivative of the Library (because it contains portions of the Library), rather than a "work that uses
the library". The executable is therefore covered by
this License. Section 6 states terms for distribution
of such executables.
115
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
Version 4, 16.09.2005
When a "work that uses the Library" uses material
from a header file that is part of the Library, the
object code for the work may be a derivative work
of the Library even though the source code is not.
Whether this is true is especially significant if the
work can be linked without the Library, or if the
work is itself a library. The threshold for this to be
true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and
small macros and small inline functions (ten lines
or less in length), then the use of the object file is
unrestricted, regardless of whether it is legally a
derivative work. (Executables containing this
object code plus portions of the Library will still
fall under Section 6.)
Otherwise, if the work is a derivative of the Library,
you may distribute the object code for the work
under the terms of Section 6. Any executables
containing that work also fall under Section 6,
whether or not they are linked directly with the
Library itself.
6. As an exception to the Sections above, you may
also combine or link a "work that uses the Library"
with the Library to produce a work containing
portions of the Library, and distribute that work
under terms of your choice, provided that the
terms permit modification of the work for the customer's own use and reverse engineering for
debugging such modifications.
You must give prominent notice with each copy of
the work that the Library is used in it and that the
Library and its use are covered by this License. You
must supply a copy of this License. If the work during execution displays copyright notices, you
must include the copyright notice for the Library
among them, as well as a reference directing the
user to the copy of this License. Also, you must do
one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for
the Library including whatever changes were
used in the work (which must be distributed
under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with
the complete machine-readable "work that
uses the Library", as object code and/or source
code, so that the user can modify the Library
and then relink to produce a modified executable containing the modified Library.
(It is understood that the user who changes
the contents of definitions files in the Library
will not necessarily be able to recompile the
application to use the modified definitions.)
b) Use a suitable shared library mechanism for
linking with the Library. A suitable mechanism
116
is one that (1) uses at run time a copy of the
library already present on the user's computer
system, rather than copying library functions
into the executable, and (2) will operate properly with a modified version of the library, if the
user installs one, as long as the modified version is interface-compatible with the version
that the work was made with.
c) Accompany the work with a written offer,
valid for at least three years, to give the same
user the materials specified in Subsection 6a,
above, for a charge no more than the cost of
performing this distribution.
d) If distribution of the work is made by offering access to copy from a designated place,
offer equivalent access to copy the above
specified materials from the same place.
e) Verify that the user has already received a
copy of these materials or that you have
already sent this user a copy.
For an executable, the required form of the "work
that uses the Library" must include any data and
utility programs needed for reproducing the executable from it. However, as a special exception,
the materials to be distributed need not include
anything that is normally distributed (in either
source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless
that component itself accompanies the executable.
It may happen that this requirement contradicts
the license restrictions of other proprietary libraries that do not normally accompany the operating
system. Such a contradiction means you cannot
use both them and the Library together in an executable that you distribute.
7. You may place library facilities that are a work
based on the Library side-by-side in a single
library together with other library facilities not
covered by this License, and distribute such a
combined library, provided that the separate distribution of the work based on the Library and of
the other library facilities is otherwise permitted,
and provided that you do these two things:
a) Accompany the combined library with a
copy of the same work based on the Library,
uncombined with any other library facilities.
This must be distributed under the terms of
the Sections above.
b) Give prominent notice with the combined
library of the fact that part of it is a work based
on the Library, and explain where to find the
accompanying uncombined form of the same
work.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
8. You may not copy, modify, sublicense, link with,
or distribute the Library except as expressly provided under this License. Any attempt otherwise
to copy, modify, sublicense, link with, or distribute
the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you
under this License will not have their licenses terminated so long as such parties remain in full
compliance.
9. You are not required to accept this License,
since you have not signed it. However, nothing
else grants you permission to modify or distribute
the Library or its derivative works. These actions
are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing
the Library (or any work based on the Library), you
indicate your acceptance of this License to do so,
and all its terms and conditions for copying, distributing or modifying the Library or works based
on it.
Version 4, 16.09.2005
10. Each time you redistribute the Library (or any
work based on the Library), the recipient automatically receives a license from the original licensor
to copy, distribute, link with or modify the Library
subject to these terms and conditions. You may
not impose any further restrictions on the recipients' exercise of the rights granted herein. You are
not responsible for enforcing compliance by third
parties with this License.
11. If, as a consequence of a court judgment or
allegation of patent infringement or for any other
reason (not limited to patent issues), conditions
are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of this License, they do not excuse you
from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may
not distribute the Library at all. For example, if a
patent license would not permit royalty-free redistribution of the Library by all those who receive
copies directly or indirectly through you, then the
only way you could satisfy both it and this License
would be to refrain entirely from distribution of
the Library.
If any portion of this section is held invalid or
unenforceable under any particular circumstance,
the balance of the section is intended to apply,
and the section as a whole is intended to apply in
other circumstances.
It is not the purpose of this section to induce you
to infringe any patents or other property right
claims or to contest validity of any such claims;
this section has the sole purpose of protecting the
integrity of the free software distribution system
which is implemented by public license practices.
Many people have made generous contributions
to the wide range of software distributed through
that system in reliance on consistent application
of that system; it is up to the author/donor to
decide if he or she is willing to distribute software
through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear
what is believed to be a consequence of the rest of
this License.
12. If the distribution and/or use of the Library is
restricted in certain countries either by patents or
by copyrighted interfaces, the original copyright
holder who places the Library under this License
may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not
thus excluded. In such case, this License incorporates the limitation as if written in the body of this
License.
13. The Free Software Foundation may publish
revised and/or new versions of the Lesser General
Public License from time to time. Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems
or concerns.
Each version is given a distinguishing version
number. If the Library specifies a version number
of this License which applies to it and "any later
version", you have the option of following the
terms and conditions either of that version or of
any later version published by the Free Software
Foundation. If the Library does not specify a
license version number, you may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library
into other free programs whose distribution conditions are incompatible with these, write to the
author to ask for permission. For software which is
copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will
be guided by the two goals of preserving the free
status of all derivatives of our free software and of
promoting the sharing and reuse of software generally.
117
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / appendix.fm / 05.03.2010
Appendix
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE
LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE LIBRARY "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE LIBRARY IS WITH
YOU. SHOULD THE LIBRARY PROVE DEFECTIVE,
YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE THE
LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE
THE LIBRARY (INCLUDING BUT NOT LIMITED TO
LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Libraries
If you develop a new library, and you want it to be
of the greatest possible use to the public, we recommend making it free software that everyone
can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General
Public License).
To apply these terms, attach the following notices
to the library. It is safest to attach them to the start
of each source file to most effectively convey the
exclusion of warranty; and each file should have at
least the "copyright" line and a pointer to where
the full notice is found.
<one line to give the library's name and a brief
idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute
it and/or modify it under the terms of the GNU
Lesser General Public License as published by
the Free Software Foundation; either version
2.1 of the License, or (at your option) any later
version.
This library is distributed in the hope that it will
be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for
more details.
You should have received a copy of the GNU
Lesser General Public License along with this
library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
02111-1307 USA
Also add information on how to contact you by
electronic and paper mail.
You should also get your employer (if you work as
a programmer) or your school, if any, to sign a
"copyright disclaimer" for the library, if necessary.
Here is a sample; alter the names:
Version 4, 16.09.2005
Yoyodyne, Inc., hereby disclaims all copyright
interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990, Ty Coon,
President of Vice
118
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Glossary.fm / 05.03.2010
Glossary
Glossary
A
Authentication
Restriction of access to a network/service by
use of an ID and password to log in.
Automatic ringback
See Ringback when the number is busy.
B
Block dialling
Enter the complete phone number, and correct it if necessary. Then pick up the handset
or press the handsfree key to dial the phone
number.
Broadband Internet access
See DSL.
C
Call waiting
= CW.
Version 4, 16.09.2005
Network provider feature. A beep during a
call indicates that another caller is waiting.
You can accept or reject the second call. You
can activate/deactivate the feature.
Call divert
= CD
Automatic diversion (CD) of a call to a different telephone number. There are three kinds
of call divert:
– CDU, Call Divert Unconditional
– CDB, Call Divert Busy
– CDNR, Call Divert No Reply
Call swap
Call swap allows you to switch between two
callers or between a conference and an individual caller without allowing the waiting
caller to listen to the call.
Client
Application that requests a service from a
server.
Codec
Coder/decoder
Codec is a procedure that digitises and compresses analogue voice before it is sent via
the Internet, and decodes – i.e., translates
into analogue voice – digital data when
voice packets are received. There are different codecs, with differing degrees of compression, for instance.
Both parties involved in the telephone connection (caller/sender and recipient) must
use the same codec. This is negotiated
between the sender and the recipient when
establishing a connection.
The choice of codec is a compromise
between voice quality, transmission speed
and the necessary bandwidth. A high level
of compression, for example, means that the
bandwidth required for each voice connection is low. However, it also means that the
time needed to compress/decompress the
data is greater, which increases execution
time for data in the network and thus
impairs voice quality. The time required
increases the delay between the sender
speaking and the recipient hearing what has
been said.
COLP/COLR
Connected Line Identification Presentation/
Restriction
Feature provided by a ISDN connection for
outgoing calls.
COLP displays the phone number accepting
the call on the calling party's display unit.
The number of the party accepting the call is
different to the dialled number e.g., if the call
is diverted or transferred.
The called party can use COLR (Connected
Line Identification Restriction) to prevent
the number from appearing on the calling
party's display.
119
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Glossary.fm / 05.03.2010
Glossary
Consultation call
You are on a call. With a consultation call, you
interrupt the conversation briefly to establish a second connection to another participant. If you terminate the connection to this
participant immediately, then this was a
consultation call. If you switch between the
first and second participant, it is called Call
swap.
DHCP
about superordinate DNS servers and other
local DNS servers on the Internet.
You can specify the IP address of the primary/secondary DNS server.
See also: DynDNS.
Domain name
Name of one (or several) Web server(s) on
the Internet (e.g., gigaset.net). The domain
name is assigned to the relevant IP address
by DNS.
DSL
Dynamic Host Configuration Protocol
Digital Subscriber Line
Internet protocol that handles the automatic
assignment of IP addresses to Network subscriber. The protocol is made available in the
network by a server. A DHCP server can, for
example, be a router.
The phone contains a DHCP client. A router
that contains a DHCP server can assign the IP
addresses for the phone automatically from
a defined address block. The dynamic
assignment means that several Network
subscribers can share one IP address,
although they can only use it alternately and
not simultaneously.
With some routers you can specify that the IP
address for the phone is never changed.
DMZ (Demilitarised Zone)
DMZ describes a part of a network that is
outside the firewall.
A DMZ is set up, as it were, between a network you want to protect (e.g., a LAN) and a
non-secure network (e.g., the Internet). A
DMZ permits unrestricted access from the
Internet to only one or a few network components, while the other network components remain secure behind the firewall.
DNS
Data transfer technology that allows Internet access with e.g., 1.5 Mbps over a conventional telephone line. Prerequisites: DSL
modem and the appropriate service offered
by the Internet provider.
DSLAM
D
Version 4, 16.09.2005
Domain Name System
Hierarchical system that permits the assignment of IP addresses to Domain names that
are easier to memorise. This assignment has
to be managed by a local DNS server in each
(W)LAN. The local DNS server determines
the IP address, if necessary by enquiring
120
Digital Subscriber Line Access Multiplexer
The DSLAM is a switch cabinet in an
exchange at which all subscriber connectors
converge.
DTMF
Dual Tone Multi-Frequency
Another description for dual tone multi-frequency dialling (DTMF).
Dynamic IP address
A dynamic IP address is assigned to a network component automatically via DHCP.
The dynamic IP address for a network component can change every time it registers or
at certain time intervals.
See also: Fixed IP address
DynDNS
Dynamic DNS
Domain names and IP addresses are
assigned via DNS. For Dynamic IP addresses
this service is enhanced with "Dynamic
DNS". This permits the use of a network component with a dynamic IP address as a
Server on the Internet. DynDNS ensures
that a service can always be addressed on
the Internet under the same Domain names
regardless of the current IP address.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Glossary.fm / 05.03.2010
Glossary
E
ECT
Explicit Call Transfer
Participant A calls participant B. The participant puts the connection on hold and calls
participant C. Rather than connect everyone
in a three-party conference, A now transfers
participant B to C and hangs up.
EEPROM
Electrically erasable programmable read only
memory
Memory building block in your phone with
fixed data (e.g., default and customised settings) and data saved automatically (e.g., call
list entries).
Ethernet network
Wired LAN.
Version 4, 16.09.2005
F
Firewall
You can use a firewall to protect your network against unauthorised external access.
This involves combining various measures
and technologies (hard and/or software) to
control the flow of data between a private
network you wish to protect and an unprotected network (e.g., the Internet).
See also: NAT.
Firmware
Device software in which basic information
is saved for the functioning of a device. To
correct errors or update the device software,
a new version of the firmware can be loaded
into the device's memory (firmware update).
Fixed IP address
A fixed IP address is assigned to a network
component manually during network configuration. Unlike a Dynamic IP address, a
fixed IP address does not change.
Flat rate
Billing system for an Internet connection.
The Internet provider charges a set monthly
fee. There are no additional charges for the
duration of the connection or number of
connections.
Full duplex
Data transmission is a mode in which data
can be sent and received at the same time.
G
G.711 a law, G.711 μ law
Standard for a Codec.
G.711 delivers a very good voice quality that
corresponds to that in the ISDN fixed line. As
there is little compression, the necessary
bandwidth is around 64 kbit/s per voice connection, but the delay caused by coding/
decoding is only approx. 0.125 ms.
"a law" describes the European standard and
"μ law" describes the North American/Japanese equivalent.
G.722
Standard for a Codec.
G.722 is a broadband language codec with a
bandwidth of 50 Hz to 7 kHz, a net transmission rate of 64 kbit/s per voice connection
and integrated speech pause recognition
and comfort noise generation (silence suppression).
G.722 delivers very good voice quality. A
higher sampling rate provides clearer and
better voice quality than other codecs and
enables a speech tone in High Definition
Sound Performance (HDSP).
G.726
Standard for a Codec.
G.726 delivers a good voice quality. It is inferior to the quality with codec G.711 but better than with G.729.
G.729A/B
Standard for a Codec.
The voice quality is more likely to be lower
with G.729A/B. As a result of the high level of
compression, the necessary bandwidth is
only around 8 kbit/s per voice connection,
but the delay is around 15 ms.
Gateway
Connects two different Networks e.g., a
router as an Internet gateway.
121
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Glossary.fm / 05.03.2010
Glossary
Global IP address
See IP address.
GSM
Global System for Mobile Communication
Originally, a European standard for mobile
networks. GSM can now be described as a
worldwide standard. However, national
standards in the USA and Japan had been
more frequently supported up until now.
H
Headset
Combination of microphone and headphone. A headset makes using handsfree
mode more convenient. There are headsets
available that can be connected to the handset by a cable.
HTTP proxy
Server via which the Network subscribers
can process their Internet traffic.
I
IEEE
Institute of Electrical and Electronics Engineers
Version 4, 16.09.2005
International body that defines standards in
electronics and electrical engineering, concerned in particular with the standardisation
of LAN technology, transmission protocols,
data transfer rate and wiring.
Infrastructure network
Network with central structure: All Network
subscribers communicate via a central
Router.
Internet
Global WAN. A series of protocols have been
defined for exchanging data, known by the
name TCP/IP.
All Network subscriber are identifiable via
their IP address. DNS assigns a Domain
name to the IP address.
Important services on the Internet include
the World Wide Web (WWW), e-mail, file
transfer and discussion forums.
122
Internet Service Provider
Enables access to the Internet for a fee.
IP (Internet Protocol)
TCP/IP protocol on the Internet. IP is responsible for addressing parties in a Network
using IP addresses and routes data from the
sender to the recipient. IP determines the
paths (routing) along which the data packets travel.
IP address
A unique address for a network component
within a network based on the TCP/IP protocols (e.g., LAN, Internet). On the Internet,
domain names are usually assigned instead
of IP addresses. DNS assigns the corresponding IP address to the domain name.
The IP address has four parts (decimal numbers between 0 and 255) separated by full
stops (e.g., 230.94.233.2).
The IP address is made up of the network
number and the number of the Network
subscriber (e.g., phone). Depending on the
Subnet mask, the first one, two or three
parts make up the network number and the
rest of the IP address addresses the network
component. The network number of all the
components in any one network must be
identical.
IP addresses can be assigned automatically
with DHCP (dynamic IP addresses) or manually (static IP addresses).
See also: DHCP.
IP pool range
Range of IP addresses that the DHCP server
can use to assign dynamic IP addresses.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Glossary.fm / 05.03.2010
Glossary
L
N
LAN
NAT
Local Area Network
Network Address Translation
Network with a restricted physical range. A
LAN can be wireless (WLAN) and/or wired.
Local IP address
The local or private IP address is the address
for a network component in the local network (LAN). The network operator can assign
any address he or she wants. Devices that act
as a link from a local network to the Internet
(gateway or router) have a public and a private IP address.
See also IP address.
Method for converting (private) IP
addresses to one or more (public) IP
addresses. NAT enables the IP addresses of
Network subscribers (e.g., your telephone)
in a LAN to be concealed behind a shared IP
address for the Routers on the Internet.
Network
Group of devices. Devices can be connected
in either wired or wireless mode.
Networks can also differ in range and structure:
– Range: Local networks (LAN) or widearea networks (WAN)
– Structure: Infrastructure network or
ad-hoc network
Network subscriber
Devices and PCs that are connected to each
other in a network e.g., servers, PCs and
phones.
M
MAC address
Media Access Control Address
Hardware address by means of which each
network device (e.g., network card, switch,
phone) can be uniquely identified worldwide. It consists of 6 parts (hexadecimal
numbers) separated by a "-" (e.g., 00-90-6544-00-3A).
The MAC address is assigned by the manufacturer and cannot be changed.
Mbps
Million bits per second
Unit of the transmission speed in a network.
MSN
Multiple Subscriber Number
Version 4, 16.09.2005
You can request up to 10 different telephone
numbers for the ISDN multiple connection.
An MSN is one of the phone numbers
assigned to you without a local area code.
Your telephone uses the MSN in line with
your requirements, as a receive connection
and/or send connection.
Music on hold
Music that is played while you are on a
Consultation call or during a Call swap.
The waiting participant hears music while
on hold.
P
Paging (handset search)
Desktop phone function for locating the
registered handsets. The desktop phone
establishes a connection to every registered
handset. The handsets start to ring.
PIN
Personal Identification Number
Protects against unauthorised use. When
the PIN is activated, a number combination
has to be entered to access a protected area.
You can protect your desktop phone configuration data with a system PIN (4-digit
number combination).
Port
Data is exchanged between two applications in a Network via a port.
123
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Glossary.fm / 05.03.2010
Glossary
Port forwarding
The Internet gateway (e.g., your router) forwards data packets from the Internet that
are directed to a certain Port to the port concerned. This allows servers in the LAN to
offer services on the Internet without you
needing a public IP address.
Port number
Indicates a specific application of Network
subscribers. Depending on the setting in
the LAN, the port number is permanently
assigned or else it is newly assigned with
each access.
The combination of IP address/Port number
uniquely identifies the recipient or sender of
a data packet within a network.
Pre-dialling
See Block dialling.
Private IP address
See Public IP address.
Protocol
Describes the agreements for communicating within a Network. It contains rules for
opening, administering and closing a connection, about data formats, time frames
and possible error handling.
Public IP address
The public IP address is the address for a network component on the Internet. It is
assigned by the Internet Service Provider.
Devices that act as a link from a local network to the Internet (gateway, router) have a
public and a local IP address.
See also: IP address, NAT
R
RAM
Random Access Memory
Version 4, 16.09.2005
Memory in which you have reading and storage rights. Items such as melodies and
screen pictures are saved in the RAM after
you have loaded them onto the phone via
the Web configurator.
124
ROM
Read Only Memory
A type of memory that can only be read.
Router
Routes data packets within a network and
between different networks via the quickest
route. Can connect Ethernet networks and
WLAN. Can be a Gateway to the Internet.
Routing
Routing is the transfer of data packets to
another subscriber in your network. On their
way to the recipient, the data packets are
sent from one router to the next until they
reach their destination.
If data packets were not forwarded in this
way, a network like the Internet would not
be possible. Routing connects the individual
networks to this global system.
A router is a part of this system; it transfers
data packets both within a local network
and from one network to the next. Transfer
of data from one network to another is performed on the basis of a common protocol.
Ringback when the call is not answered
= CCNR (Completion of calls on no reply). If a
participant does not reply when called, a
caller can arrange an automatic ringback.
As soon as the destination phone has completed a call and is free again, the caller is
called back. This feature must be supported
by the exchange. The ringback request is
automatically cancelled after about two
hours (depending on the network provider).
Ringback when the number is busy
= CCBS (Completion of calls to busy subscriber). If a caller hears the busy tone, he or
she can activate the ringback function.
As soon as the connection is free, the caller is
called back. As soon as the caller lifts the
receiver, the connection is made automatically.
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Glossary.fm / 05.03.2010
Glossary
S
Server
Provides a service to other Network subscribers (Clients). The term can indicate a
computer/PC or an application. A server is
addressed via IP address/Domain names
and Port.
Static IP address
See Fixed IP address.
Subnet
Segment of a Network.
Subnet mask
IP addresses consist of a fixed line network
number and a variable subscriber number.
The network number is identical for all Network subscribers. The size of the network
number part is determined in the subnet
mask. In the subnet mask 255.255.255.0,
for example, the first three parts of the
IP address are the network number and the
last part the subscriber number.
Symmetric NAT
A symmetric NAT assigns different external
IP addresses and port numbers to the same
internal IP addresses and port numbers –
depending on the external target address.
T
TCP
Transmission Control Protocol
Transport protocol. Session-based transmission protocol: It sets up, monitors and
terminates a connection between sender
and recipient for transporting data.
TLS
Transport Layer Security
Version 4, 16.09.2005
Protocol for encrypting data transmissions
on the Internet. TLS is a superordinated
Transport protocol.
Transmission rate
Speed at which data is transmitted in the
WAN or LAN. The transmission rate is measured in data units per unit of time (Mbit/s).
Transport protocol
Controls data transport between two communication partners (applications).
See also: UDP, TCP, TLS.
U
UDP
User Datagram Protocol
Transport protocol. Unlike TCP, UDP is a
non session-based protocol. UDP does not
establish a fixed connection. The data packets ("datagrams") are sent as a broadcast.
The recipient is solely responsible for making sure the data is received. The sender is
not notified about whether it is received or
not.
URL
Universal Resource Locator
Globally unique address of a domain on the
Internet.
URLs identify a resource by its location on
the Internet. For historical reasons the term
is often used as a synonym for URI.
User identification
User ID
Name/number combination for access
e.g., to your private address directory on the
Internet.
V
Voice codec
See Codec.
W
WAN
Wide Area Network
Wide-area network that is unrestricted in
terms of area (e.g., Internet).
125
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / accessories_SAG.fm / 05.03.2010
Accessories
Accessories
Gigaset handsets
Upgrade your Gigaset to a cordless PABX:
Gigaset SL400 handset
u
u
u
u
u
u
u
u
Genuine metal frame and keypad
High-quality keypad illumination
1.8" TFT colour display
Bluetooth® and mini USB
Directory for up to 500 vCards
Talk/standby time of up to 14h/230h
Large font for call lists and directory
Brilliant sound quality in handsfree mode:
4 handsfree settings
u Caller pictures, slideshow and screensaver
(analogue and digital clock)
u Silent alert, download ringer melodies
u ECO DECT
u Calendar with appointment scheduler
u Night mode with time-controlled ringer deactivation
u No interruptions from anonymous calls
u Room monitor
u SMS with up to 640 characters
www.gigaset.com/gigasetsl400
Gigaset S79H handset
Version 4, 16.09.2005
u
u
u
u
u
u
u
u
Illuminated graphic colour display (65k colours)
Illuminated keypad
Handsfree mode
Polyphonic ringer melodies
Address book for approx. 500 entries
Caller picture
SMS (prerequisite: CLIP must be enabled)
PC interface e.g., for managing address book entries,
ringers and screensavers
u Bluetooth
u Headset socket
u Room monitor
www.gigaset.com/gigasets79h
126
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / accessories_SAG.fm / 05.03.2010
Accessories
Gigaset C59H handset
u Social life management with room monitor and birthday
reminders
Individual programming of ringers with 6 VIP-groups
High-quality keypad with illumination
1.8" TFT colour display
Directory for up to 150 vCards
Talk/standby time of up to 12h/180h, standard batteries
Large font for call lists and directory
Brilliant sound quality in handsfree mode
Screensaver (digital clock)
ECO DECT
Alarm clock
No interruptions from anonymous calls
SMS with up to 640 characters
www.gigaset.com/gigasetc59h
u
u
u
u
u
u
u
u
u
u
u
u
Gigaset SL78H handset
u
u
u
u
u
u
u
u
Version 4, 16.09.2005
Illuminated graphic colour display (256k colours)
Illuminated keypad
Handsfree mode
Polyphonic ringer melodies
Directory for approx. 500 entries
Caller picture
SMS (prerequisite: CLIP must be enabled)
PC interface e.g., for managing directory entries,
ringers and screensavers
u Bluetooth
u Room monitor
www.gigaset.com/gigasetsl78h
127
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / accessories_SAG.fm / 05.03.2010
Accessories
Gigaset E49H handset
u
u
u
u
u
u
u
u
u
u
u
Resistant to shocks, dust and water splashes
Hardy illuminated keypad
Colour display
Directory for 150 entries
Talk/standby time of up to 12h/250h, standard batteries
Brilliant sound quality in handsfree mode
Screensaver
ECO DECT
Alarm clock
Room monitor
SMS with up to 640 characters
www.gigaset.com/gigasete49h
Gigaset repeater
The Gigaset repeater can be used to increase the reception
range between your Gigaset handset and the base.
www.gigaset.com/gigasetrepeater
Version 4, 16.09.2005
All accessories and batteries are available from your phone retailer.
Use only original accessories. This will avoid possible health risks and personal
injury, and also ensure that all the relevant regulations are complied with.
128
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Saturn_isdnSIX.fm / 05.03.2010
Index
Index
Version 4, 16.09.2005
A
Access code . . . . . . . . . . . . . . . . . . . . . . . . . . 99
for a PABX . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Access protection . . . . . . . . . . . . . . . . . . . . . 93
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Acknowledge tones . . . . . . . . . . . . . . . . . . . 91
Activating
advisory tones . . . . . . . . . . . . . . . . . . . . . . 91
answering machine . . . . . . . . . . . . . . . . . 65
answering machine
(remote operation). . . . . . . . . . . . . . 71
appointment . . . . . . . . . . . . . . . . . . . . . . . 75
call divert . . . . . . . . . . . . . . . . . . . . . . . . . . 37
FAX port. . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
muting ringer . . . . . . . . . . . . . . . . . . . . . . . 60
network mailbox . . . . . . . . . . . . . . . . . . . . 72
two-way record . . . . . . . . . . . . . . . . . . . . . 69
withholding phone numbers. . . . . . . . . 37
Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Alert tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Anniversary . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
deactivating . . . . . . . . . . . . . . . . . . . . . . . . 49
missed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
saving in directory . . . . . . . . . . . . . . . . . . 49
Announcement (answering machine) . . . 67
Answer only mode (answering
machine) . . . . . . . . . . . . . . . . . . . . . . . . . 65
Answering machine . . . . . . . . . . . . . . . . . . . 65
activating/deactivating . . . . . . . . . . . . . . 65
define for quick dial . . . . . . . . . . . . . . . . . 72
deleting messages . . . . . . . . . . . . . . . . . . 69
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 44
playing back messages . . . . . . . . . . . . . . 67
recording a personal announcement/
advisory message . . . . . . . . . . . . . . . 66
remote operation . . . . . . . . . . . . . . . . . . . 71
scrolling back . . . . . . . . . . . . . . . . . . . . . . . 68
scrolling forward . . . . . . . . . . . . . . . . . . . . 68
Appointment . . . . . . . . . . . . . . . . . . . . . . . . . 75
Appointment/anniversary
displaying missed . . . . . . . . . . . . . . . . . . . 77
Appointments
activating/deactivating . . . . . . . . . . . . . . 76
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
managing . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Area code
setting own area code . . . . . . . . . . . . . . . 93
Assigning a key . . . . . . . . . . . . . . . . . . . . . . . 86
Assigning a number key . . . . . . . . . . . . . . . 86
Assigning function keys . . . . . . . . . . . . . . . 86
Authentication . . . . . . . . . . . . . . . . . . . . . . . 119
Authorisation . . . . . . . . . . . . . . . . . . . . . . . . 104
Automatic redial . . . . . . . . . . . . . . . . . . . . . . 42
B
Birthday, see Anniversary
Block dialling . . . . . . . . . . . . . . . . . . . . . . . . 119
Bluetooth
accepting a call . . . . . . . . . . . . . . . . . . . . . 34
activating . . . . . . . . . . . . . . . . . . . . . . . . . . 82
changing device name . . . . . . . . . . . . . . 84
deregistering devices. . . . . . . . . . . . . . . . 84
list of known devices . . . . . . . . . . . . . . . . 83
registering devices . . . . . . . . . . . . . . . . . . 82
setting own area code . . . . . . . . . . . . . . . 93
transferring directory (vCard) . . . . . . . . 48
Brightness
display backlight . . . . . . . . . . . . . . . . . . . . 88
Broadband Internet access . . . . . . . . . . . . 119
Broadband voice codec . . . . . . . . . . . . . . . 121
Browser, operating . . . . . . . . . . . . . . . . . . . . 63
Busy on Busy . . . . . . . . . . . . . . . . . . . . . . . . . 38
C
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Call
accepting . . . . . . . . . . . . . . . . . . . . . . . . . . 34
accepting (Bluetooth) . . . . . . . . . . . . . . . 34
ending . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
picking up from answering
machine . . . . . . . . . . . . . . . . . . . . . . . 69
transferring . . . . . . . . . . . . . . . . . . . . . . 41, 99
transferring (connecting) . . . . . . . . . 79, 81
two-way record . . . . . . . . . . . . . . . . . . . . . 69
Call charges . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Call divert . . . . . . . . . . . . . . . . . . . . . . . . 37, 119
Call duration . . . . . . . . . . . . . . . . . . . . . . . 33, 54
Call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Call screening during recording . . . . . . . . 70
Call swap . . . . . . . . . . . . . . . . . . . . . . . . . 40, 119
Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . 119
accepting/rejecting . . . . . . . . . . . . . . . . . 39
activating/deactivating . . . . . . . . . . . . . . 38
external call . . . . . . . . . . . . . . . . . . . . . . . . 38
internal call . . . . . . . . . . . . . . . . . . . . . . . . . 80
129
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Saturn_isdnSIX.fm / 05.03.2010
Index
Version 4, 16.09.2005
Caller picture . . . . . . . . . . . . . . . . . . . 35, 46, 91
Calling
from classified directory . . . . . . . . . . . . . 51
from online directory . . . . . . . . . . . . . . . . 51
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
unknown . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Calling Line Identification . . . . . . . . . . . . . . 34
Capacity
directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
resource directory . . . . . . . . . . . . . . . . . . . 92
Caring for your telephone . . . . . . . . . . . . . 105
CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Changing
device name (Bluetooth). . . . . . . . . . . . . 84
display language . . . . . . . . . . . . . . . . . . . . 87
earpiece volume . . . . . . . . . . . . . . . . . . . . 88
handsfree volume . . . . . . . . . . . . . . . . . . . 88
internal names . . . . . . . . . . . . . . . . . . . . . . 81
internal numbers . . . . . . . . . . . . . . . . . . . 81
names of internal parties . . . . . . . . . . . . 81
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
system PIN . . . . . . . . . . . . . . . . . . . . . . . . . 93
Character set . . . . . . . . . . . . . . . . . .57, 58, 107
Charge rates, see Call charges
Checking service information . . . . . . . . . 104
Classified directory . . . . . . . . . . . . . . . . . . . . 50
CLI, CLIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
CNIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Codecs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
COLP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
COLR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Confirmation tone. . . . . . . . . . . . . . . . . . . . . 91
Connected Line Identification
Presentation/Restriction . . . . . . . . . . 119
Connecting the desktop phone
to PABX . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Consultation call . . . . . . . . . . . . . . . . . . 40, 120
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Consumption of electricity, see
Power consumption
Control key . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Correcting incorrect entries . . . . . . . . . . . . 25
Customer Care . . . . . . . . . . . . . . . . . . . . . . . 101
Customer Service & Assistance . . . . . . . . 101
130
CW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
D
Deactivating
advisory tones . . . . . . . . . . . . . . . . . . . . . . 91
answering machine . . . . . . . . . . . . . . . . . 65
appointment . . . . . . . . . . . . . . . . . . . . . . . 75
call divert . . . . . . . . . . . . . . . . . . . . . . . . . . 37
FAX port. . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
muting ringer . . . . . . . . . . . . . . . . . . . . . . . 60
network mailbox . . . . . . . . . . . . . . . . . . . . 72
two-way record . . . . . . . . . . . . . . . . . . . . . 69
withholding phone numbers. . . . . . . . . 37
DECT interface
activating/deactivating . . . . . . . . . . . . . . 97
Delete key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Deleting
announcement for answering
machine . . . . . . . . . . . . . . . . . . . . . . . 67
characters . . . . . . . . . . . . . . . . . . . . . . . . . . 25
message . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
MSN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Demilitarised Zone . . . . . . . . . . . . . . . . . . . 120
Deregistering
devices (Bluetooth) . . . . . . . . . . . . . . . . . 84
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Desktop phone
connecting to PABX . . . . . . . . . . . . . . . . . 99
connecting with router . . . . . . . . . . . . . . 14
in restoring to default settings . . . . . . . 98
power consumption. . . . . . . . . . . . . . . . 106
setting up . . . . . . . . . . . . . . . . . . . . . 9, 10, 92
system PIN . . . . . . . . . . . . . . . . . . . . . . . . . 93
updating firmware . . . . . . . . . . . . . . . . . . 96
DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Dialling
directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Digital Subscriber Line . . . . . . . . . . . . . . . . 120
Digital Subscriber Line
Access Multiplexer . . . . . . . . . . . . . . . 120
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
copying number from text . . . . . . . . . . . 48
managing entries . . . . . . . . . . . . . . . . . . . 46
opening . . . . . . . . . . . . . . . . . . . . . . . . . 24, 50
order of entries . . . . . . . . . . . . . . . . . . . . . 46
saving anniversary . . . . . . . . . . . . . . . . . . 49
saving entry . . . . . . . . . . . . . . . . . . . . . . . . 45
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Saturn_isdnSIX.fm / 05.03.2010
Index
saving the sender’s number (SMS) . . . . 59
searching for an entry . . . . . . . . . . . . . . . 50
sending entry/list to handset. . . . . . . . . 47
transferring a vCard (Bluetooth) . . . . . . 48
using to enter numbers . . . . . . . . . . . . . . 49
Display
backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
call duration/costs . . . . . . . . . . . . . . . . . . 54
capacity (directory). . . . . . . . . . . . . . . . . . 47
capacity (resource directory) . . . . . . . . . 92
changing display language . . . . . . . . . . 87
name (CNIP) . . . . . . . . . . . . . . . . . . . . . . . . 34
number (CLI/CLIP) . . . . . . . . . . . . . . . . . . . 34
screensaver . . . . . . . . . . . . . . . . . . . . . . . . . 87
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Display backlight
brightness . . . . . . . . . . . . . . . . . . . . . . . . . . 88
time control . . . . . . . . . . . . . . . . . . . . . . . . 88
Display keys . . . . . . . . . . . . . . . . . . . . . . . . . . 25
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Displaying
missed appointments/anniversaries . . 77
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
DMZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
DNS server, preferred . . . . . . . . . . . . . . . . . . 94
Domain name . . . . . . . . . . . . . . . . . . . . . . . 120
Domain Name System . . . . . . . . . . . . . . . . 120
Draft list (SMS) . . . . . . . . . . . . . . . . . . . . . . . . 56
DSL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
DSLAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Duration of a call . . . . . . . . . . . . . . . . . . . . . . 54
Dynamic DNS . . . . . . . . . . . . . . . . . . . . . . . . 120
Dynamic Host Configuration
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . 120
Dynamic IP address . . . . . . . . . . . . . . . . . . 120
DynDNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Version 4, 16.09.2005
E
Earpiece volume . . . . . . . . . . . . . . . . . . . . . . 88
ECO DECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Eco mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Eco mode+ . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
ECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 99
activating/deactivating . . . . . . . . . . . . . . 38
E-mail address . . . . . . . . . . . . . . . . . . . . . . . . 57
copying from the directory . . . . . . . . . . 49
Ending
call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Entry
select from directory . . . . . . . . . . . . . . . . 46
Environment . . . . . . . . . . . . . . . . . . . . . . . . . 105
Error tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Ethernet network . . . . . . . . . . . . . . . . . . . . 121
Explicit Call Transfer . . . . . . . . . . . . . . . . . . 121
External call
call waiting . . . . . . . . . . . . . . . . . . . . . . . . . 38
divert to ans. mach. . . . . . . . . . . . . . . . . . 69
F
Fax (SMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Fax machine
connecting . . . . . . . . . . . . . . . . . . . . . . . . . 85
FAX port
connecting fax . . . . . . . . . . . . . . . . . . . . . . 85
Firewall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
automatic update . . . . . . . . . . . . . . . . . . . 97
checking version . . . . . . . . . . . . . . . . . . . 104
starting update . . . . . . . . . . . . . . . . . . . . . 96
updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Fixed IP address . . . . . . . . . . . . . . . . . . . . . . 121
Fixed line network
cancelling ringback . . . . . . . . . . . . . . . . . 41
Flat rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Full duplex . . . . . . . . . . . . . . . . . . . . . . . . . . 121
G
Gateway. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
General troubleshooting . . . . . . . . . . . . . . 102
Global IP address . . . . . . . . . . . . . . . . . . . . . 122
Global System for
Mobile Communication . . . . . . . . . . 122
GNU General Public Licence . . . . . . . . . . . 108
GNU General Public License (GPL) . . . . . 109
GNU Lesser General Public License . . . . 108
GNU Lesser General Public License
(LGPL). . . . . . . . . . . . . . . . . . . . . . . . . . . 113
GPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Group call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
GSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
H
Handset
changing internal number . . . . . . . . . . . 81
changing names . . . . . . . . . . . . . . . . . . . . 81
deregistering . . . . . . . . . . . . . . . . . . . . 78, 79
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
locating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
registering . . . . . . . . . . . . . . . . . . . . . . . . . 78
131
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Saturn_isdnSIX.fm / 05.03.2010
Index
Handsfree mode . . . . . . . . . . . . . . . . . . . . . . 35
Handsfree volume . . . . . . . . . . . . . . . . . . . . . 88
Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
HTTP proxy . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Version 4, 16.09.2005
I
Icon
alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . 77
answering machine . . . . . . . . . . . 65, 66, 70
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
for new messages . . . . . . . . . . . . . . . . . . . 44
new message . . . . . . . . . . . . . . . . . . . . . . . 67
new SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Identify caller (ISDN) . . . . . . . . . . . . . . . . . . . 41
Identifying the caller (ISDN) . . . . . . . . . 34, 41
Idle status . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
returning to . . . . . . . . . . . . . . . . . . . . . . . . 26
Idle status (display) . . . . . . . . . . . . . . . . . . . . 26
IEEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Incoming list (SMS) . . . . . . . . . . . . . . . . . 57, 58
Incorrect entries (correction) . . . . . . . . . . . 25
Info centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Infrastructure network . . . . . . . . . . . . . . . . 122
Input language (SMS). . . . . . . . . . . . . . . . . . 56
Installation wizard . . . . . . . . . . . . . . . . . . . . . 15
Institute of Electrical and
Electronics Engineers. . . . . . . . . . . . . 122
Internal
conference . . . . . . . . . . . . . . . . . . . . . . . . . 80
consultation . . . . . . . . . . . . . . . . . . . . . . . . 80
making calls . . . . . . . . . . . . . . . . . . . . . . . . 79
Internal call . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
call waiting . . . . . . . . . . . . . . . . . . . . . . . . . 80
Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Internet access (broadband) . . . . . . . . . . 119
Internet protocol . . . . . . . . . . . . . . . . . . . . . 122
Internet Service Provider . . . . . . . . . . . . . . 122
IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
IP address . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
automatically obtaining one . . . . . . . . . 93
checking . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
dynamic . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
fixed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
local . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
132
private . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
public . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
IP configuration . . . . . . . . . . . . . . . . . . . . . . . 93
IP pool range . . . . . . . . . . . . . . . . . . . . . . . . 122
ISDN numbers, see MSN
ISDN wizard . . . . . . . . . . . . . . . . . . . . . . . . . . 16
K
Key 1 (quick dial)
assigning . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keys
control key . . . . . . . . . . . . . . . . . . . . . . . . .
delete key . . . . . . . . . . . . . . . . . . . . . . . . . .
display keys . . . . . . . . . . . . . . . . . . . . . . . .
talk key . . . . . . . . . . . . . . . . . . . . . . . . . . . .
72
24
25
25
33
L
LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Language
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
LGPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
License
GPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
LGPL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Linking, see SMS
List
answering machine . . . . . . . . . . . . . . 43, 44
call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
known devices (Bluetooth) . . . . . . . . . . 83
missed calls . . . . . . . . . . . . . . . . . . . . . . . . 43
network mailbox . . . . . . . . . . . . . . . . . . . . 44
SMS draft list . . . . . . . . . . . . . . . . . . . . . . . 56
SMS incoming list . . . . . . . . . . . . . . . . . . . 58
SMS list . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Local Area Network. . . . . . . . . . . . . . . . . . . 123
Local IP address . . . . . . . . . . . . . . . . . . . . . . 123
Locating handsets . . . . . . . . . . . . . . . . . . . . . 79
M
MAC address. . . . . . . . . . . . . . . . . . . . . . 98, 123
checking (handset) . . . . . . . . . . . . . . . . . . 98
Making calls
accepting a call . . . . . . . . . . . . . . . . . . . . . 34
cost-effective calls . . . . . . . . . . . . . . . . . . 54
internal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Manual redial . . . . . . . . . . . . . . . . . . . . . . . . . 42
Mbps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Saturn_isdnSIX.fm / 05.03.2010
Index
Media Access Control . . . . . . . . . . . . . . . . . 123
Medical equipment . . . . . . . . . . . . . . . . . . . . .7
Menu
end tone . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Message key
open list . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
opening lists . . . . . . . . . . . . . . . . . . . . . . . . 44
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
copying the number to
the directory . . . . . . . . . . . . . . . . . . . 68
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
marking as "new" . . . . . . . . . . . . . . . . . . . 68
new message icon . . . . . . . . . . . . . . . . . . 67
playing (network mailbox) . . . . . . . . . . . 73
playing back . . . . . . . . . . . . . . . . . . . . . . . . 67
Microphone
muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Million bits per second. . . . . . . . . . . . . . . . 123
Missed
anniversary . . . . . . . . . . . . . . . . . . . . . . . . . 77
appointment . . . . . . . . . . . . . . . . . . . . . . . 77
Missed call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
MSN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Multiple Subscriber Number . . . . . . . . . . 123
Music on hold. . . . . . . . . . . . . . . . . . . . . 91, 123
Muting
first ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Version 4, 16.09.2005
N
Name
displaying caller's name (CNIP) . . . . . . . 34
of a handset . . . . . . . . . . . . . . . . . . . . . . . . 81
NAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
symmetric . . . . . . . . . . . . . . . . . . . . . . . . . 125
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Ethernet. . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Network Address Translation . . . . . . . . . . 123
Network mailbox . . . . . . . . . . . . . . . . . . . . . . 72
activating/deactivating . . . . . . . . . . . . . . 72
calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
define for quick dial . . . . . . . . . . . . . . . . . 72
entering number . . . . . . . . . . . . . . . . . . . . 72
Network MB, see Network mailbox
Network services . . . . . . . . . . . . . . . . . . . . . .
Number
copying from an SMS . . . . . . . . . . . . . . . .
copying from directory . . . . . . . . . . . . . .
copying to directory. . . . . . . . . . . . . . . . .
displaying caller's number (CLIP) . . . . .
entering for network mailbox . . . . . . . .
entering with directory . . . . . . . . . . . . . .
saving in the directory . . . . . . . . . . . . . . .
37
59
49
48
34
72
49
45
O
Online directory. . . . . . . . . . . . . . . . . . . . . . . 50
Operating remotely . . . . . . . . . . . . . . . . . . . 71
Operation (setting up the phone) . . . . . . . . .8
Order in directory . . . . . . . . . . . . . . . . . . . . . 46
P
PABX
connecting desktop phone . . . . . . . . . . 99
saving access code . . . . . . . . . . . . . . . . . . 99
Package contents . . . . . . . . . . . . . . . . . . . . . . . 8
Paging . . . . . . . . . . . . . . . . . . . . . . . . . . . 79, 123
PC interface . . . . . . . . . . . . . . . . . . . . . . . . . 107
Personal Identification Number . . . . . . . 123
Phone
setting up . . . . . . . . . . . . . . . . . . . . . . . . 8, 92
Picture
caller . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46, 91
deleting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
renaming. . . . . . . . . . . . . . . . . . . . . . . . . . . 92
PIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Playing back
announcement (answering
machine). . . . . . . . . . . . . . . . . . . . . . . 67
message (answering machine) . . . . . . . 67
Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Port forwarding . . . . . . . . . . . . . . . . . . . . . . 124
Port number . . . . . . . . . . . . . . . . . . . . . . . . . 124
Power adapter . . . . . . . . . . . . . . . . . . . . . . . . . .7
Power consumption . . . . . . . . . . . . . . . . . . 106
Power consumption (desktop phone) . . 106
Pre-dialling . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Preferred DNS server . . . . . . . . . . . . . . . . . . 94
Private IP address . . . . . . . . . . . . . . . . . . . . 124
Protecting the phone against access . . . . 93
Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Prv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Public IP address . . . . . . . . . . . . . . . . . . . . . 124
133
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Saturn_isdnSIX.fm / 05.03.2010
Index
Q
Questions and answers . . . . . . . . . . . . . . . 102
Quick dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
R
RAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Random Access Memory . . . . . . . . . . . . . . 124
Read Only Memory . . . . . . . . . . . . . . . . . . . 124
Receive number
display on the handset . . . . . . . . . . . . . . 35
Receiving notifications via SMS . . . . . . . . . 59
Reception booster, see Repeater
Recording
quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
two-way record . . . . . . . . . . . . . . . . . . . . . 69
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Registering
devices (Bluetooth). . . . . . . . . . . . . . . . . . 82
handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Reminder call . . . . . . . . . . . . . . . . . . . . . . . . . 49
Repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Resource directory . . . . . . . . . . . . . . . . . . . . 91
Ring delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Ringback
busy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
cancelling (fixed line network) . . . . . . . 41
initiating (fixed line network) . . . . . . . . . 39
no reply . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
setting up when MSN busy . . . . . . . . . . 38
Ringer
changing . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
muting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
setting volume. . . . . . . . . . . . . . . . . . . . . . 89
time control . . . . . . . . . . . . . . . . . . . . . . . . 90
ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
connecting desktop phone . . . . . . . . . . 14
Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
S
Version 4, 16.09.2005
Saving (access code) . . . . . . . . . . . . . . . . . . . 99
Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . .8
Screensaver. . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Searching in directory . . . . . . . . . . . . . . . . . 46
Sending directory entry to handset . . . . . 47
Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
134
Setting
date . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 92
screensaver . . . . . . . . . . . . . . . . . . . . . . . . . 87
time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 92
Setting up
busy signal . . . . . . . . . . . . . . . . . . . . . . . . . 38
desktop phone . . . . . . . . . . . . . . . . . . . 9, 10
Signal tone, see Advisory tones
SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
active send service centre . . . . . . . . . . . 60
deleting . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58
draft list . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
forwarding . . . . . . . . . . . . . . . . . . . . . . . . . 58
incoming list . . . . . . . . . . . . . . . . . . . . . . . 58
input language . . . . . . . . . . . . . . . . . . . . . 56
linked . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
notification via SMS . . . . . . . . . . . . . . . . . 59
reading . . . . . . . . . . . . . . . . . . . . . . . . . 56, 58
receiving . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
replying to or forwarding . . . . . . . . . . . . 58
saving number. . . . . . . . . . . . . . . . . . . . . . 59
self help with error messages . . . . . . . . 61
sending as a fax . . . . . . . . . . . . . . . . . . . . . 57
sending to an e-mail address . . . . . . . . . 57
status report . . . . . . . . . . . . . . . . . . . . . . . . 56
troubleshooting . . . . . . . . . . . . . . . . . . . . 61
vCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
writing . . . . . . . . . . . . . . . . . . . . . . . . . 55, 106
SMS service centre
changing number . . . . . . . . . . . . . . . . . . . 60
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Snooze mode . . . . . . . . . . . . . . . . . . . . . . . . . 77
Sound, see Ringer
Specifications . . . . . . . . . . . . . . . . . . . . . . . . 106
Speed dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Static IP address . . . . . . . . . . . . . . . . . . . . . . 125
Structure of IP address . . . . . . . . . . . . . . . . 122
Subnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Subnet mask . . . . . . . . . . . . . . . . . . . . . . . . . 125
defining . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Symmetric NAT . . . . . . . . . . . . . . . . . . . . . . 125
System
setting up . . . . . . . . . . . . . . . . . . . . . . . . . . 92
System settings
saving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Gigaset DX600A isdn / IM-OST EN / A31008-N3101-R601-1-7619 / Saturn_isdnSIX.fm / 05.03.2010
Index
T
Talk key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Text message, see SMS
Three-party conference . . . . . . . . . . . . . . . . 40
Time control
display backlight . . . . . . . . . . . . . . . . . . . . 88
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
TLS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Transferring a call . . . . . . . . . . . . . . . . . . . . . 41
Transmission Control Protocol . . . . . . . . . 125
Transmission rate . . . . . . . . . . . . . . . . . . . . 125
Transport Layer Security . . . . . . . . . . . . . . 125
Transport protocol . . . . . . . . . . . . . . . . . . . 125
Troubleshooting (SMS) . . . . . . . . . . . . . . . . 61
U
UDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Universal Resource Locator . . . . . . . . . . . 125
Unknown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Unknown call . . . . . . . . . . . . . . . . . . . . . . . . . 37
Unknown caller . . . . . . . . . . . . . . . . . . . . . . . 35
URL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
User Datagram Protocol . . . . . . . . . . . . . . 125
User ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
User identification . . . . . . . . . . . . . . . . . . . . 125
V
vCard (SMS). . . . . . . . . . . . . . . . . . . . . . . . . . .
VIP (directory entry) . . . . . . . . . . . . . . . . . . .
Volume
earpiece . . . . . . . . . . . . . . . . . . . . . . . . . . . .
earpiece/handsfree . . . . . . . . . . . . . . . . .
handsfree . . . . . . . . . . . . . . . . . . . . . . . . . .
ringer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
59
45
88
88
88
89
89
W
Version 4, 16.09.2005
WAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Warning tone, see Advisory tones
Weather forecasts
in idle display mode . . . . . . . . . . . . . . . . . 64
Wide Area Network . . . . . . . . . . . . . . . . . . . 125
Withholding phone number . . . . . . . . . . . 37
Writing (SMS) . . . . . . . . . . . . . . . . . . . . . . . . . 55
Writing and editing text . . . . . . . . . . . . . . 106
135
Gigaset Communications GmbH
Frankenstr. 2a, D-46395 Bocholt
Manufactured by Gigaset Communications GmbH
under trademark license of Siemens AG.
As of 1 Oct. 2011 Gigaset products bearing the
trademark 'Siemens' will exclusively use the trademark 'Gigaset'.
© Gigaset Communications GmbH 2010
All rights reserved. Subject to availability.
www.gigaset.com