Yamaha YHT-670BL Owner`s manual

UAB
Home Theater Package
(Subwoofer Integrated Receiver + Speaker)
YHT-S401
(SR-301 + NS-BR301)
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK DO
NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
•
Explanation of Graphical Symbols
1
2
3
4
5
6
7
8
9
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert you to the presence
of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle
is intended to alert you to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
10
11
IMPORTANT
Please record the serial number of this unit in the space below.
MODEL:
Serial No.:
The serial number is located on the rear of the unit. Retain
this Owner’s Manual in a safe place for future reference.
12
13
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to
wide slot and fully insert.
This Class B digital apparatus complies with Canadian
ICES-003.
POUR LES CONSOMMATEURS CANADIENS
Pour éviter les chocs électriques, introduire la lame la
plus large de la fiche dans la borne correspondante de
la prise et pousser jusqu’au fond.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
i En
14
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
FCC INFORMATION (for US customers)
1 IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by Yamaha may void
your authority, granted by the FCC, to use the product.
2 IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to
follow instructions could void your FCC authorization to
use this product in the USA.
3 NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15 for
Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance that
your use of this product in a residential environment will not
result in harmful interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the
users manual, may cause interference harmful to the
operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is
found to be the source of interference, which can be determined
by turning the unit “OFF” and “ON”, please try to eliminate the
problem by using one of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Corporation of
America A/V Division 6600 Orangethorpe Ave., Buena
Park, CA 90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
We Want You Listening For A Lifetime
Yamaha and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, Yamaha and the Electronic Industries Association’s Consumer Electronics Group
recommend you to avoid prolonged exposure from excessive volume levels.
ii En
Caution: Read this before operating your unit.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this unit in a well ventilated, cool, dry, clean place –
away from direct sunlight, heat sources, vibration, dust,
moisture, and/or cold. For proper ventilation, allow the
following minimum clearances.
Top: 5 cm (2 in)
Rear: 5 cm (2 in)
Sides: 5 cm (2 in)
3 Locate this unit away from other electrical appliances, motors,
or transformers to avoid humming sounds.
4 Do not expose this unit to sudden temperature changes from
cold to hot, and do not locate this unit in an environment with
high humidity (i.e. a room with a humidifier) to prevent
condensation inside this unit, which may cause an electrical
shock, fire, damage to this unit, and/or personal injury.
5 Avoid installing this unit where foreign objects may fall onto
this unit and/or this unit may be exposed to liquid dripping or
splashing. On the top of this unit, do not place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and liquid
may cause electrical shock to the user and/or damage to
this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature
inside this unit rises, it may cause fire, damage to this unit,
and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections
are complete.
8 Do not operate this unit upside-down. It may overheat,
possibly causing damage.
9 Do not use force on switches, knobs and/or cords.
10 When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
12 Only voltage specified on this unit must be used. Using this
unit with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury.
Yamaha will not be held responsible for any damage resulting
from use of this unit with a voltage other than specified.
13 To prevent damage by lightning, keep the power cable and
outdoor antennas disconnected from a wall outlet or the unit
during a lightning storm.
14 Do not attempt to modify or fix this unit. Contact qualified
Yamaha service personnel when any service is needed. The
cabinet should never be opened for any reasons.
15 When not planning to use this unit for long periods of time
(i.e. vacation), disconnect the AC power plug from the wall
outlet.
16 Be sure to read the “Troubleshooting” section in the owner’s
manual on common operating errors before concluding that
this unit is faulty.
17 Before moving this unit, press
to set this unit in standby
mode, and disconnect the power supply cable from the wall
outlet.
18 Condensation will form when the surrounding temperature
changes suddenly. Disconnect the power supply cable from
the outlet, then leave the unit alone.
19 Install this unit near the wall outlet and where the AC power
plug can be reached easily.
20 The batteries shall not be exposed to excessive heat such as
sunshine, fire or like.
21 Secure placement or installation is the owner’s responsibility.
Yamaha shall not be liable for any accident caused by
improper placement or installation of speakers.
22 Never put a hand or a foreign object into the port located on
the front side of this unit. When moving this unit, do not hold
the port as it might cause personal injury and/or damage to
this unit.
23 Never place a fragile object near the port of this unit. If the
object falls or drops by the air pressure, it may cause damage
to the unit and/or personal injury.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
As long as this unit is connected to the AC wall outlet,
it is not disconnected from the AC power source even
if you turn off this unit by . In this state, this unit is
designed to consume a very small quantity of power.
■ Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN THE MAINS LEAD ARE
COLOURED IN ACCORDANCE WITH THE
FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured BLUE must be connected
to the terminal which is marked with the letter N or
coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three pin plug.
■ For U.K. customers
If the socket outlets in the home are not suitable for the
plug supplied with this appliance, it should be cut off and
an appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note
The plug severed from the mains lead must be destroyed, as a plug
with bared flexible cord is hazardous if engaged in a live socket outlet.
iii En
INTRODUCTION
USEFUL OPERATION
Setup menu.............................................................18
Supplied parts ............................................................. 2
Remote control preparation ........................................ 2
Controls and functions ................................................ 3
Setup menu list.......................................................... 18
Basic procedure......................................................... 18
Adjusting the volume balance of each channel ........ 19
Adjusting high/low frequency sound (tone control)
.............................................................................. 19
Configuring the HDMI settings ................................ 19
Changing the brightness of the front panel display
.............................................................................. 19
Using other speakers................................................. 20
Dynamic range control.............................................. 21
Setting the matrix decode ......................................... 21
PREPARATION
Placing ...................................................................... 6
Operation by the TV remote control is difficult (with
the speaker beneath/under TV)............................... 6
Attaching the speaker to a wall................................... 7
Connection ............................................................... 8
Connecting speakers ................................................... 8
Connecting a TV and BD player................................. 9
Settings for each input source (Option menu) ....22
Adjusting input level of each jack
(VOLUME TRIM) ............................................... 22
Adjusting the audio delay (AUDIO DELAY) .......... 22
Assigning the audio input to optical/coaxial digital
input (AUDIO ASSIGN) ...................................... 22
Basic playback operation...................................... 10
Operating the unit by TV’s remote control ........23
Listening with headphones ....................................... 10
What is the HDMI control function? ........................ 23
Setting the HDMI control function ........................... 23
Registering HDMI components to TV ..................... 24
Changing the connection method and connected
components........................................................... 24
Enjoying sound modes .......................................... 11
Listening to FM broadcasts.................................. 13
Basic tuning operation .............................................. 13
Editing the preset FM station.................................... 13
Playing back iPod/iPhone and USB device ......... 16
Troubleshooting .....................................................25
Glossary ..................................................................29
Specifications..........................................................31
Available signal information .................................... 32
Notes on the remote control and batteries ................ 33
ADDITIONAL
INFORMATION
Playing back.............................................................. 16
Repeat/shuffle playback............................................ 17
Displaying music information .................................. 17
Firmware update ....................................................... 17
ADDITIONAL INFORMATION
USEFUL
OPERATION
Playback in surround sound ...................................... 11
Playback in stereo sound........................................... 11
Clear voice ................................................................ 11
Compressed Music Enhancer.................................... 12
UniVolume................................................................ 12
Volume balance adjustment...................................... 12
BASIC
OPERATION
BASIC OPERATION
PREPARATION
Getting started ......................................................... 2
INTRODUCTION
Contents
What you can do with the unit
•
•
•
•
•
Enjoy high quality surround sound (AIR SURROUND XTREME).......................................................... 11
Enjoy clear dialogue and narration (Clear voice)....................................................................................... 11
Operate the unit by TV’s remote control (HDMI control function)........................................................... 23
Play back iPod/iPhone in high quality sound (Digital Connection for iPod/iPhone)................................. 16
Expand the unit to 5.1 channel using speakers of your choice................................................................... 20
■ About this manual
1 En
English
• In this manual, operations that can be performed using either the front panel buttons or the remote control are
explained using the remote control.
• y indicates a tip for your operation. Notes contain important information about safety and operating instructions.
• This manual is produced prior to production. Design and specifications are subject to change in part as a result of
improvements, etc. In case of differences between the manual and the product, the product has priority.
INTRODUCTION
Getting started
Supplied parts
This product consists of the following items. Before making connections, make sure you have received all of the following
items.
■ Units
Subwoofer Integrated Receiver (SR-301)
Speaker (NS-BR301)
■ Accessories
Speaker cable × 1 (3 m)
Remote control × 1
Indoor FM antenna × 1
(U.S.A., Canada, Taiwan,
China and Asia models)
TV remote
signal receptor × 1
Battery × 2 (AAA, R03, UM4)
Mounting template × 1
(U.K., Europe, Russia,
Australia and Korea
models)
Owner’s Manual
×1
Remote control preparation
Before installing batteries or using the remote control, make sure that you read precautions on the remote control and
batteries in “Caution: Read this before operating your unit.”, and “Notes on the remote control and batteries” on the page 33.
■ Installing the batteries
■ Operation range
Within 6 m (20 ft)
2 En
Getting started
INTRODUCTION
Controls and functions
■ Front panel of the subwoofer integrated receiver
1
2
3
4
5
67
8
1 STATUS indicator
Lights up to show the system condition. (☞ P. 10)
4 USB port
For connecting a USB device. (☞ P. 16)
2
5 VOLUME –/+
Controls the volume of the unit. (☞ P. 10)
(Power)
Turns on the unit, or sets it to standby mode.
(☞ P. 10)
Note
6 PHONES jack
For connecting headphones. (☞ P. 10)
A small amount of electricity is consumed to receive the
infrared signal from the remote control even when the unit is
in standby mode.
7 Remote control sensor
Receives infrared signals from the remote control.
(☞ P. 2, 5)
3 INPUT
Selects an input source you want to listen to.
(☞ P. 10)
8 Front panel display
Shows information about the operational status of the
unit. (☞ P. 4)
■ Rear panel of the subwoofer integrated receiver
7
1
1 Power Cable
For connecting an AC wall outlet. (☞ P. 8)
2 HDMI IN 1 - 3/HDMI OUT (ARC) jack
• HDMI IN 1 - 3 for connecting HDMI
compatible external components. (☞ P. 9)
• HDMI OUT for connecting an HDMI compatible
TV. (☞ P. 9)
5 43
2
4 DIGITAL IN (STB) jack
For connecting digital audio pin cable to the STB.
(☞ P. 9)
5 ANALOG INPUT jack
For connecting analog audio cable to external
components. (☞ P. 9)
6 ANTENNA terminal
For connecting supplied FM antenna. (☞ P. 9)
7 SPEAKERS terminal
For connecting speakers. (☞ P. 8)
English
3 DIGITAL IN (TV) jack
For connecting optical digital cable to the TV.
(☞ P. 9)
6
3 En
Getting started
■ Front panel display of the subwoofer integrated receiver
1
2
3
45
8
7
6
1 HDMI indicator
Lights up during normal communication when HDMI
is selected as an input source.
3 Decoder indicators
The respective indicator lights up when any of the
decoders of the unit is activated.
2 Tuner indicators
4 Clear voice indicator
Lights up when Clear voice mode is selected.
(☞ P. 11)
TUNED indicator
Lights up when the unit is receiving a station.
(☞ P. 13)
STEREO indicator
Lights up when the unit is receiving a strong signal
from an FM stereo broadcast station in automatic
tuning mode. (☞ P. 13)
AUTO indicator
Flashes when the unit is tuning or presetting station
automatically. (☞ P. 13)
MEMORY indicator
Flashes when the unit is storing a station.
(☞ P. 13, 14)
EMPTY indicator
Lights up when the storing preset number is empty.
(☞ P. 14)
PS/PTY/RT/CT indicator (Europe and Russia
models only)
Lights up according to the available Radio Data
System information. (☞ P. 15)
4 En
5 VOLUME indicator
• Indicates the current volume level.
• Flashes while the mute function is activated.
(☞ P. 10)
6 Multi information display
Shows the selected input source, current sound mode
and other information.
7 ENHANCER indicator
Lights up when compressed music enhancer function
is activated. (☞ P. 12)
8 UNIVOLUME indicator
Lights up when UniVolume mode is selected.
(☞ P. 12)
Getting started
5 OPTION
Enters option menu for each input. (☞ P. 13, 16, 22)
Infrared signal
transmitter
6
E
1
2
D
(MENU), (
), (
),
(
),
ENTER
• Change setting.
• Control iPod/iPhone and USB device such as USB
flash memory, portable music player. (☞ P. 16)
S / T: Scroll screen of iPod/iPhone, or skip folder of
USB device. (☞ P. 16)
INTRODUCTION
■ Remote control
7 RETURN
• Cancels preset registration. (☞ P. 13)
• Returns to previous menu in option menu.
(☞ P. 22)
• Stops playback of USB device such as USB flash
memory or portable music player. (☞ P. 16)
3
4
C
5
8 SUBWOOFER +/–
Adjust volume balance of subwoofer. (☞ P. 10, 19)
9 ENHANCER
Turns Compressed Music Enhancer mode on and off.
(☞ P. 12)
6
7
0 LEVEL
Adjusts output level of speakers. (☞ P. 12)
B
8
A
0
9
A UNIVOLUME
Turns UniVolume mode on and off. (☞ P. 11)
B VOLUME +/–, MUTE
Control volume of the unit. (☞ P. 10)
C SETUP
Enters the setup menu. (☞ P. 18)
D CLEAR VOICE
Turns Clear voice mode on and off. (☞ P. 11)
E
1 SURROUND
Selects the surround mode. (☞ P. 11)
(Power)
Turns on the unit, or sets it to standby mode.
(☞ P. 10)
2 STEREO
Turns extended stereo mode on and off alternately.
(☞ P. 11)
3 Input buttons
Select the input source you want to listen to.
(☞ P. 10)
Press the respective input button repeatedly to select
the input source.
TV/STB: TV, STB
HDMI1-3: HDMI1, HDMI2, HDMI3
ANALOG/FM: ANALOG, FM
USB: USB
/
,
English
4 MEMORY, TUNING / , PRESET
INFO
Control an FM tuner. (☞ P. 13)
5 En
PREPARATION
Placing
To enjoy quality sound thoroughly, place this unit in the
appropriate positions, and install the components
properly. The following illustrations are the setting images
of this unit.
Operation by the TV remote control
is difficult (with the speaker
beneath/under TV)
TV remote control operation may be difficult if the
speaker hides the sensor of your TV when beneath or
under the TV. Try the solutions below and see whether
this solves the problem.
See the manual of your TV about where the sensor of your
TV remote control is.
Notes
• Do not place this unit on/under any other components such as
BD player in a pile. The vibration of this unit may cause system
failure, etc. in other components.
• Keep enough ventilation space on the side, rear, and bottom
side (that attached legs) of this unit. Do not place this unit on a
thick carpet etc.
• Low frequency sound produced by the subwoofer integrated
receiver may be heard differently depending on the listening
position and subwoofer location. To enjoy desired sounds, try
changing the location of the subwoofer integrated receiver.
• Depending on your installation environment, connections to
external components can be done before installing this unit. We
recommend that you temporarily place and arrange all
components in order to decide which procedure is best done
first.
• When you clean this unit, use a clean, dry and soft cloth (such
as a cloth for glasses).
• Do not press the speaker grille when moving it.
1 Adjust the height of the speaker by using the
stands.
Remove the screws that secure the stands of the speaker,
and move the stands to adjust the height. Secure the stands
by the same screws, as illustrated below.
2 Use the TV remote signal receptor
The TV remote signal receptor (supplied) receives the
signal of the TV remote control, and transmits to the TV
remote control sensor. Place the TV remote signal
receptor as shown below.
When placing the subwoofer integrated
receiver in an upright position
Remove the stands and spacers on the bottom of the
subwoofer integrated receiver and attach them to the side,
as illustrated below.
Signal receiver
1
Remove
the two
transparent
seals
Signal
emitter
3
2
Attach the signal receptor
to the top of speaker
Position the signal
emitter to face the
center of TV remote
control sensor.
TV remote
control
sensor
Approx. 10 mm (3/8 in)
6 En
Placing
y
Attaching the speaker to a wall
3 Hang the speaker on the screws using the
keyholes on the back of the speaker.
Installing the speaker using the screw holes
You can also use the screw holes on the rear of the speaker
for installing the speaker using a commercially available
rack etc.
Installing the speaker using the keyholes
You can attach the speaker to a wall using commercially
available screws (#8, Diameter: 4 mm (3/16”)).
38.5 mm (1-9/16”)
When installing the speaker on a wall, all
installation work must be performed by a
qualified contractor or dealer. The customer
must never attempt to perform this installation
work. Improper or inadequate installation could
cause the speaker to fall, resulting in personal
injury.
14 mm (9/16”)
Screw
(M6)
wall and mark the holes of the mounting
template.
NS-BR301
Min 7 mm (1/4”)
2 Remove the mounting template and then
install screws (not supplied) at the marks.
2 to 4 mm (1/16” to 3/16”)
Screw
hole
Rack etc.
Mark
7 to 9 mm
(1/4” to 3/8”)
256 mm
(10-1/16”)
Screw holes
Hole depth: 14 mm (9/16”)
Diameter: 6 mm (1/4”)
1 Attach the supplied mounting template on a
Tapes or thumbtacks
PREPARATION
• Aim the TV remote control toward the top of TV remote signal
receptor.
• You can operate the TV remote control by using the TV remote
signal receptor even if the unit is in standby mode.
• Some TV remote controls may not work.
• You can attach the TV remote signal receptor in an area where
there are projections, such as the rear of speaker stand, etc.
• Clean the attachment area on the speaker, using a soft, dry
cloth, such as one for cleaning glasses.
• Clean the signal receiver and signal emitter of the TV remote
signal receptor, using a soft, dry cloth, such as one for cleaning
glasses.
4 mm (#8)
Minimum
20 mm (3/4”)
Notes
• Attach the speaker to a rack or wall. Do not attach the speaker
to a wall that is made of weak materials such as plaster or
veneered woods. Doing so may cause the speaker to fall.
• Use commercially available screws that can support the weight
of the installation.
• Make sure you use specified screws to attach the speaker. Using
clamps other than specified screws, such as short screws, nails,
or two-sided tape, may cause the speaker to fall.
• When connecting the speaker, fix the speaker cables in place
where they will not become loose. If your foot or hand
accidentally gets caught on a loose speaker cable, the speaker
may fall.
• After attaching the speaker, check that the speaker is fixed
securely. Yamaha will bear no responsibility for any accidents
caused by improper installations.
English
7 En
Connection
• Do not connect the power cable until all connections are completed.
• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or
terminal.
Connecting speakers
Follow the procedure below to connect the subwoofer integrated receiver and speakers.
Twist and pull off the
insulation tube on the lead
wire.
Insert into the terminal by matching the wire color
with the color-coded terminal on the rear panel.
Surround speakers
(sold separately) y
R
L
To AC outlet
Red
5.1ch playback
Brown
Speaker (NS-BR301)
Twist and pull off the
insulation tube on the
lead wire.
y
• Additional surround speakers (commercially available) are required for 5.1ch playback.
• Refer to “Using other speakers” (☞ P. 20) when using additional speakers.
8 En
Green
Black
White
Gray
Insert into the terminal by matching
the wire color with the color-coded
terminal on the rear panel.
Connection
Connecting a TV and BD player
Follow the steps below for cable connection according to the components you use.
1 HDMI cable (sold separately)
3 Optical cable (sold separately)*
2 HDMI cable (sold separately)
4 Indoor FM antenna (supplied)
1
y
1 Remove the cap
4
*2
2 Check the
direction of the
plug
PREPARATION
If the radio wave reception is weak in your area or you want to
improve the radio wave reception, we recommend that you use an
outdoor antenna. For details, consult your nearest authorized
Yamaha dealer or Service Center.
*3
3*
1
HDMI INPUT
(Example)
2
1
1
TV
Video signals
Audio signals
Game console
BD player
9 En
English
*1 y
For HDMI control function, an optical cable is not required if the TV’s “ARC” terminal is used “2”. Audio return channel (ARC) carries
digital audio signal (from the TV) to this unit via an HDMI cable. Activate the HDMI control function of this unit to enable ARC
function. (☞ P. 19)
*2 y
Connect analog pin cables (sold separately) to the analog audio output jacks of an external device, such as a VTR, to play back analog
audio sound.
*3 y
Connect a digital audio pin cable (sold separately) to the coaxial digital output jack of a satellite/cable TV tuner to play back digital
sound.
BASIC OPERATION
Basic playback operation
Once you have finished all cable connections and remote control operation, follow the procedure below to start basic
playback operation.
Start playback on the selected external
component.
For information on the external component, refer to
the instruction manual for the product.
3
1
2
4 Press VOLUME +/– to adjust the volume
level.
Press SUBWOOFER +/– to adjust the
subwoofer level.
y
4
• To turn off the volume temporarily, press MUTE. While
the mute function is activated, the VOLUME indicator
flashes. To resume the volume, press MUTE again or
press VOLUME +/–.
• When audio is output from both TV speaker and this unit,
mute the TV sound.
• The subwoofer volume can be adjusted separately from
the volume.
• You can also adjust the subwoofer volume listening to test
tone. (☞ P. 19)
• Lowering the subwoofer volume is recommended at night.
Note
You can operate the unit by the TV’s remote control
when the HDMI control function is available. See the
page 23 for details.
1 Press
(Power).
This unit is turned on and the STATUS indicator
lights green.
The input source and surround mode appear in the
front panel display.
When sound of HDMI is output from the TV, the volume
level does not change if you press VOLUME +/– or MUTE
of the remote control.
5 Select surround mode or stereo mode and
set your sound preferences. (☞ P. 11)
Press (Power) again to set the unit to
standby mode.
When the HDMI control function is set to on or the battery of
iPod/iPhone is charged, the STATUS indicator lights red. When
the HDMI control function is set to off, the STATUS indicator
turns off. (☞ P. 3)
y
This unit has the auto-sleep function, which will
automatically switch the unit to turn off if the unit is left
turned on for 12 hours without any operation being
performed.
2 Press one of the input buttons to select an
input source.
After the input source name has been displayed in the
front panel display for three seconds, the front panel
display returns to its normal display. (Input source
name: surround/stereo mode).
10 En
Listening with headphones
Insert a headphone plug to the PHONES jack (☞ P. 3) of
this unit.
• The headphone volume, tone control can be set
separately with speaker setting.
• You can enjoy surround and stereo sound using a
headphone same as the speaker. (☞ P. 11)
Enjoying sound modes
SURROUND
CLEAR VOICE
STEREO
Playback in surround sound
You can enjoy a realistic sound effect.
Playback in stereo sound
An extended sound is achieved for a 2 channel source
such as a CD player.
Press SURROUND to set surround mode.
Press STEREO to enter extended stereo mode.
Surround mode descriptions in following order
“STEREO”: Reproduces the sound without any effect.
“EXTENDED STEREO”: Reproduces a wider stereo
image.
Display
Effect
Each time you press STEREO, the function is turned on
(EXTENDED STEREO) and off (STEREO) alternately.
MOVIE
This mode is useful when you enjoy movie
contents on media.
MUSIC
This mode is useful when you listen to music
contents on media.
SPORTS
This mode is useful when you enjoy sports
programs.
GAME
This mode is useful when you enjoy video
games.
This function makes dialogue in movies, TV dramas or
play-by-play broadcasting clear to listen to.
TV PROGRAM
(TV PROG)
This mode is useful when you enjoy a general
TV program.
Press CLEAR VOICE to turn the function on/off.
STANDARD*1
Play back without sound effect.
*1
This mode is available only during playback with surround
speakers connected. (☞ P. 20)
BASIC
OPERATION
Press SURROUND repeatedly until desired mode appears
in the front panel display.
y
• The default setting is “EXTENDED STEREO”.
• The unit memorizes the settings assigned to each input source.
Clear voice
When Clear voice is activated, “●” (Clear voice) indicator
is displayed.
y
The unit memorizes the setting assigned to each input source.
y
• The unit automatically memorizes the settings assigned to each
input source.
• The unit creates high quality 7.1 channel surround playback by
employing AIR SURROUND XTREME technology in the
absence of surround speakers.
• Depending on settings you choose, the unit may not decode
DTS-HD Master Audio sound or DTS-HD High Resolution
Audio sound. In such cases, only the DTS is decoded.
English
11 En
Enjoying sound modes
/
SUBWOOFER +/–
UNIVOLUME
LEVEL
ENHANCER
Compressed Music Enhancer
Volume balance adjustment
Play back digitally compressed format such as MP3 and
WMA emphasizing bass and treble extended dynamically.
You can adjust the volume balance of the virtual speakers
and subwoofer during playback.
Press ENHANCER to turn the function on/off.
1 Press LEVEL repeatedly to select adjustable
When Compressed Music Enhancer is activated,
ENHANCER indicator is displayed.
y
The unit memorizes the settings assigned to each input source.
UniVolume
While watching the TV, compensate the excessive volume
differences to make it easier to hear during the following
cases.
• When switching the channel
• When a TV program changed to commercial
• When one program is finished and another program
started
Press UNIVOLUME to turn the function on/off.
When UniVolume is activated, UNIVOLUME indicator is
displayed.
y
The unit memorizes the settings assigned to each input source.
12 En
channels from the followings.
Available options
FRONT L,
FRONT R
Front speaker (left/right)
CENTER
Center speaker
SURROUND L,
SURROUND R
Virtual surround speaker, and surround
speakers (left/right)
SUBWOOFER
Subwoofer
2 Press
/
to adjust the volume level
while the channel you selected is displayed.
Adjustable range: –6 to +6 (Default setting: 0)
y
The subwoofer volume is adjustable by pressing
SUBWOOFER +/-.
Notes
• You cannot adjust the volume balance when using the
headphone.
• This setting of each channel is available for all input
source.
Listening to FM broadcasts
Basic tuning operation
ANALOG/FM
INFO
Press repeatedly to set the input
to FM.
Selects the information
displayed in the front panel
display.
MEMORY
Stores preset stations manually.
PRESET
/
Select the preset FM stations.
/
Press to change the frequency by 1
step, or press and hold to search
stations automatically.
Cursor in the option menu
BASIC
OPERATION
TUNING
RETURN
OPTION
Returns to the previous menu or
cancels the operation.
Enters the option menu when the
input is set to FM.
Editing the preset FM station
■ Automatic preset
When automatic preset tuning is completed, the front
panel display shows message “Preset Complete” for
three seconds firstly and returns to the option menu
secondly.
You can store up to 40 FM stations (01 to 40).
1 Press ANALOG/FM repeatedly to select FM
input.
2 Press OPTION to enter the option menu.
“1.VOLUME TRIM” appears firstly in the front
panel display.
3 Press
/
to select “2.AUTO PRESET”
and press ENTER.
y
Press PRESET
/
repeatedly to select a preset number
to which the first station will be stored.
Press RETURN while searching automatically, automatic preset
is stopped.
Notes
• Any stored station data existing under a preset number is
cleared when you store a new station under the same preset
number.
• If the number of received stations does not reach 40, automatic
preset tuning automatically stops after searching for all the
available stations.
• Only the station with strong signals can be stored. If the desired
station is not stored, or a station is not stored to the desired
preset number, preset the station manually. (☞ P. 14)
13 En
English
After approximately 5 seconds, automatic presetting
starts from the lowest frequency and proceeds
through higher frequencies. When the frequency is
stored, the TUNED indicator lights up.
y
Listening to FM broadcasts
■ Manual station preset
■ Clearing the preset station
Use this feature to preset your desired station manually.
1 Press OPTION to enter the option menu.
2 Display “3.CLEAR PRESET” using /
1 Tune into a radio station you want to preset.
2 Press MEMORY.
“MANUAL PRESET” appears in the front panel
display, followed soon by the preset number to which
the station will be registered.
y
By pressing down MEMORY for more than 2 seconds, the
station is registered to the lowest empty preset number or a
preset number one higher than the last preset number.
3 Press PRESET
/
to select the preset
number (01 to 40) to which the station will be
registered.
When you select a preset number to which no station
is registered, EMPTY indicator appears on the
display. When you select a registered preset number,
a registered frequency is displayed on the right of the
preset number.
y
To cancel registration, press RETURN on the remote
control or leave the tuner without any operations for about
30 seconds.
4 Press MEMORY again to register.
and press ENTER.
Preset number and the frequency appears in the front
panel display.
y
You can cancel the operation and return to the option menu
by pressing RETURN on the remote control.
3 Select the preset number of the registered
station you want to clear using
/
and
press ENTER.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat the above steps.
To end the operation, press OPTION.
■ Using the monaural reception
mode
When the signal of the desired FM station is too weak, set
the reception mode to “MONO” to increase signal quality.
1 Press OPTION to enter the option menu.
2 Display “4.STEREO/MONO” by using and
press ENTER.
3 Select “MONO” to set the reception mode to
monaural by using
14 En
/
.
Listening to FM broadcasts
■ Switching the information display
Each time you press INFO, the information display
changes as follows:
■ Using the TP (traffic program)
data service (Europe and Russia
models only)
Use this feature to receive the TP (traffic program) data
service of the Radio Data System station network.
1 Press OPTION to enter the option menu.
2 Press / to select “5.TRAFFIC PROG”
Europe and Russia models only
• SURROUND MODE
Displays the surround mode or stereo mode.
• FREQUENCY
Displays the frequency and preset number.
• PROGRAM SERVICE (PS)
Displays the currently received Radio Data System
program.
• PROGRAM TYPE (PTY)
Displays the type of the currently received Radio Data
System program.
• RADIO TEXT (RT)
Displays the information of the currently received
Radio Data System program.
• CLOCK TIME (CT)
Displays the current time.
y
• Press RETURN to cancel a search.
• If no operation is performed for 30 seconds during search,
the option menu closes and the search is cancelled.
BASIC
OPERATION
Information type
and press ENTER.
The search starts automatically. The AUTO indicator
and “TP” in the multi information display flash
during the search. When a traffic program is received,
“TP” and frequency remain displayed, and the search
finishes.
If the unit fails to receive a traffic program, “TP” and
the frequency turn off, and “TP Not Found” appears
in the front panel display.
English
15 En
Playing back iPod/iPhone and USB device
Connect a USB device, such as iPod/iPhone, USB flash
memory or portable music player, to play back audio files.
USB
INFO
OPTION
SETUP
ENTER
FOLDER
▲/▼
RETURN
/
Playing back
Battery charge feature
The battery of a connected device can be charged when
the unit is on. An iPod/iPhone connected to the unit keeps
on being charged even if the unit is set to standby mode.
Supported iPod/iPhone
iPod classic
iPod nano (3rd Generation to 6th Generation)
iPod touch
iPhone
iPhone 3G
iPhone 3GS
iPhone 4
y
• Some features may not be available depending on the model or
the software version of your iPod/iPhone.
• For a complete list of status messages that appear in the front
panel display, see the “Messages for iPod/iPhone and USB
device” section in “Troubleshooting” (☞ P. 27).
• Be sure to set the volume to minimum before removing your
iPod/iPhone.
Supported USB devices
A USB flash memory and USB portable music player
formatted in FAT format and supporting for USB Mass
Storage Class
Note
Some USB devices may not be supported, even in the above.
16 En
1 Press USB to select USB input.
2 Play back the iPod/iPhone or USB device.
iPod/iPhone
USB device
: play/pause
: skip forward (press and
hold: fast-forward)
: skip backward (press and
hold: fast-rewind)
▲/▼: scroll the screen
: play/pause*1
: skip forward (press and
hold: fast-forward)
: skip backward (press and
hold: fast-rewind)
RETURN: stop
FOLDER ▲/▼: skip the
folder*2
*1
*2
Resumes playing the music last played back (resume playback)
The folder name appears in the front panel display for three
seconds when skipped.
y
The unit automatically plays back the iPod/iPhone or USB device
in the following cases.
• When setting the input to USB, while the unit is on and an iPod/
iPhone or USB device is connected.
• When the input setting is USB at the time the unit is turned on
with an iPod/iPhone or USB device.
• When a playing iPod/iPhone is connected to the unit that is
turned on. (The input setting is automatically set to USB.)
Playing back iPod/iPhone and USB device
Repeat/shuffle playback
Displaying music information
1 Press OPTION to enter the option menu.
2 Press / to select “2.REPEAT” and
press ENTER.
3 Press
/
to select the available option
and press ENTER.
Available options (Default setting: OFF)
iPod/iPhone
USB device
You can display information on the music currently
playing back.
Press INFO.
Press INFO repeatedly to switch the information
(displayed for three seconds) in the order below.
iPod/iPhone: SONG (music name) → PLAY TIME
(playback time) → ARTIST (artist name) → ALBUM
(album name) → SONG (music name)
USB device: FILE (file name) → PLAY TIME (playback
time) → SONG (music name) → ARTIST (artist name) →
ALBUM (album name) → FILE (file name)
Cancels repeat
playback
Cancels repeat
playback
ONE
Repeats playing back a
music singly
Repeats playing back a
music singly
Notes
ALL
Plays back all the music
repeatedly in your iPod/
iPhone
Plays back all the music
repeatedly in your USB
device
• If the information cannot be displayed entirely in the front panel
display, it is scrolled once.
• There are some characters that cannot be displayed in the front
panel display of this unit.
FOLDER
Plays back all the music
repeatedly in the folder
saved in your USB
device
RANDOM
Plays back all the music
at random in the folder
saved in your USB
device
Firmware update
You can update the firmware of this unit.
1 Copy the firmware data into USB flash
memory. Then connect the USB flash
memory to the USB port on the front panel of
this unit.
Make sure that you copy the firmware file into the
root directory of the USB flash memory. Refer to the
documentation associated with the firmware file.
■ Shuffle playback of iPod/iPhone
1 Press OPTION to enter the option menu.
2 Press / to select “3.SHUFFLE” and
press ENTER.
3 Press
/
to select the parameter and
press ENTER.
Available options (Default setting: OFF)
OFF: Cancels shuffle playback
SONGS: Plays back music in random order.
ALBUMS: Plays back albums in random order.
BASIC
OPERATION
OFF
2 Press SETUP.
3 Press / to select “6:FIRMWARE” and
press ENTER.
4 Press
/
to select “6-2:USB UPDATE”
and press ENTER.
The update starts.
y
• Press
/
to select “6-1:VERSION” and you can see the
version of this unit firmware displayed in the front panel
display.
• See the “Messages for firmware update” section in
“Troubleshooting” (☞ P. 28) about the messages for firmware
update that appear in the front panel display.
English
17 En
USEFUL OPERATION
Setup menu
Setup menu list
Menu
1:SP LEVEL
Sub menu
Features
Page
1-1:FRONT L
1-2:FRONT R
1-3:CENTER
1-4:SURROUND L
Adjusting the volume balance with test tone
☞ P. 19
Adjusting high/low frequency sound (tone control)
☞ P. 19
Configuring the HDMI settings
☞ P. 19
Changing the brightness of the front panel display
☞ P. 19
1-5:SURROUND R
1-6:SUBWOOFER
2:TONE CONTROL
2-1:BASS
2-2:TREBLE
3:HDMI SETUP
3-1:CONTROL
3-2:AUDIO
4:DISPLAY MODE
5:SP SETUP
6:FIRMWARE
5-1:SP CHANNEL
5-2:SP TYPE
Changing the setting of the speaker type
5-3:SP DISTANCE
Setting the distance between the speakers
5-4:CROSSOVER
Cutting the crossover register
6-1:VERSION
Displaying the firmware version of this unit
6-2:USB UPDATE
Updating the firmware of this unit
8-1:DECODE MODE
Selecting the decoder
8-2:C.IMAGE
Adjusting the center image
7:D.RANGE
8:MATRIX DECODE
Selecting the number of channel
☞ P. 20
☞ P. 17
☞ P. 21
Adjusting the dynamic range
☞ P. 21
Basic procedure
3 Press
SETUP
Press and hold
faster.
ENTER
RETURN
/
/
to adjust the value of each
menu.
/
to change the setting value
4 Press SETUP again to exit the setup menu.
y
• Press RETURN or
You can change various settings of this unit using the
setup menu.
1 Press SETUP to enter the setup menu.
“1:SP LEVEL” is displayed in the front panel
display.
2 Press
/
to select menu and press
ENTER.
Repeat this procedure until desired menu/sub menu is
displayed.
18 En
• Press
to return to the previous menu.
to enter the next menu.
Note
If you do not operate within 30 seconds after entering the setup
menu, the unit automatically exits the setup menu.
Setup menu
Adjusting the volume balance of
each channel
Menu: 1:SP LEVEL
Adjust the volume balance between the channels with test
tones output from each channel.
Sub menu:
“1-1:FRONT L” “1-2:FRONT R”: Adjusts the output
level of the front speaker (left/right) channels.
“1-3:CENTER”: Adjusts the output level of the center
speaker channel.
“1-4:SURROUND L” “1-5:SURROUND R”: Adjusts the
output level of the virtual surround/surround speaker (left/
right) channels.
“1-6:SUBWOOFER”: Adjusts the output level of the
subwoofer channel.
Adjustable range: –6 to +6 (Default setting: 0)
Available options: OFF, ON (Default setting: OFF)
“OFF”: Deactivates the HDMI control function. The
standby power consumption of this unit decreases.
“ON”: Activates the HDMI control function.
y
To activate the ARC function, set “3-1:CONTROL” to “ON”.
■ Setting the audio output
Sub menu: 3-2:AUDIO
You can select a component to play back HDMI audio
signals. This setting is effective when “3-1:CONTROL” is
set to “OFF”.
Available options: AMP, TV (Default setting:
AMP)
“AMP”: Outputs HDMI sound signals from the speakers
connected to this unit.
“TV”: Outputs HDMI sound signals from the speakers of
a TV connected to this unit.
y
• You can also adjust the volume balance while playing the input
device. (☞ P. 12)
• As you complete each channel setting, press LEVEL to move to
the next channel for adjustment.
Adjusting high/low frequency
sound (tone control)
You can change the brightness of the front panel display.
You can also turn off the front panel display to view a
movie in a darker environment.
The brightness of the front panel changes as follows.
Menu: 4:DISPLAY MODE
Adjustable range (Default setting: “DIMMER 0”)
USEFUL
OPERATION
Menu: 2:TONE CONTROL
You can adjust the balance of the high frequency range
(Treble) and low frequency range (Bass) of sounds output
from the front speakers to obtain desired tone. When
headphones are connected, adjusts the balance of the highfrequency range and low-frequency range of sounds
output from headphones.
Changing the brightness of the
front panel display
Bright
Sub menu
“2-1:BASS”: Adjusts the balance of the low frequency
range (Bass) of sounds output from the speaker.
“2-2:TREBLE”: Adjusts the balance of the high frequency
range (Treble) of sounds output from the speaker.
Adjustable range: –6 to +6 (Default setting: 0)
Dark
Configuring the HDMI settings
Menu: 3:HDMI SETUP
You can configure the settings related to HDMI signals
and HDMI control function.
■ Switching HDMI control function
on/off
Selecting DISPLAY OFF turns off the front panel display after
exiting the setup menu.
Notes
• The front panel display lights up momentarily when any
operation is performed with DISPLAY OFF mode selected.
• Only the STATUS indicator remains lit in DISPLAY OFF
mode.
English
Sub menu: 3-1:CONTROL
You can set whether to use the HDMI control function.
For details, see “Operating the unit by TV’s remote
control” (☞ P. 23).
*
19 En
Setup menu
Using other speakers
Menu: 5:SP SETUP
You can set the speaker type if you want to add or change
speakers. When you connect only the supplied speaker,
you do not have to change the setting.
■ Selecting the number of channels
and the front speaker type
Sub menu: 5-2:SP TYPE
You can select the type of front speakers.
“BAR”: When you use the unit, either on its own or in
addition to other commercially available speakers
“BOOK SHELF”: This setting is not used for this system
“OTHER”: When you connect commercially available
speakers instead of the unit
Sub menu: 5-1:SP CHANNEL
You can select the number of output speakers.
Supplied speaker:
Commercially available speakers:
5-1:SP CHANNEL
2CH
5-2:SP TYPE
3CH
(Default setting)
4CH
5CH
BAR
(Default setting)
*3
BOOK SHELF
*1
*1
*1, 3
*1, 3
*1, 2
*1, 2
*1, 2, 3
*1, 2, 3
OTHER
*1: “5-3:SP DISTANCE” setting available *2: “5-4:CROSSOVER” setting available
*3: “8:MATRIX DECODE” settings available
■ Setting the distance between the
speakers
Sub menu: 5-3:SP DISTANCE
Select a parameter suited for the distance between the
front left and right speakers, to obtain the most suitable
surround effect.
Available options (Default setting: NORMAL)
“WIDE”: When the distance between the front speakers is
over 150 cm (59-1/16”).
“NORMAL”: When the distance between the front
speakers is from 80 cm (31-1/2”) to 150 cm (59-1/16”).
“NARROW”: When the distance between the front
speakers is within 80 cm (31-1/2”).
Notes
• When the surround mode is off, this setting cannot be made.
• This setting can be made only when “2CH” or “3CH” is
selected in “5-1:SP CHANNEL”.
20 En
■ Cutting the crossover register
Sub menu: 5-4:CROSSOVER
You can set the cutoff frequency output from the built-in
subwoofer of this unit according to the specification of the
connected speakers.
Available options (Default setting: 150Hz)
80Hz, 100Hz, 120Hz, 150Hz, 200Hz
Setup menu
Dynamic range control
Setting the matrix decode
Menu: 7:D.RANGE
You can adjust the dynamic range compression. Dynamic
range is the difference between the smallest sound that can
be heard above the noise of the equipment and the biggest
sound that can be heard without distortion.
Menu: 8:MATRIX DECODE
The matrix decode function expands 2ch stereo sound to
surround sound.
Available options: AUTO/MIN, STANDARD, MAX
(Default setting: MAX)
“AUTO/MIN”:
(MIN) Adjust the dynamic range for low volume or a
quiet environment, such as at night, for playing back
bitstream signals except for Dolby TrueHD signals.
(AUTO) Adjust the dynamic range based on information
from the input signal when playing back Dolby TrueHD
signal.
“STANDARD”: The dynamic range recommended for
regular home use.
“MAX”: Outputs sound without adjusting the dynamic
range of the input signals.
Sub menu: 8-1:DECODE MODE
This sub menu is selectable only when “STANDARD” is
selected for the surround mode.
■ Selecting the decoder
Available options (Default setting: DOLBY PLII)
DOLBY PLII, Neo:6 Cinema, Neo:6 Music
■ Adjusting the center image
Sub menu: 8-2:C.IMAGE
Adjusts the front left and right channel output relative to
the center channel to make the center channel more or less
dominant as necessary. This is adjustable only when
“Neo:6 Music” is selected in “8-1:DECODE MODE”.
Adjustable range (Default setting: 0.3)
0.0 to 1.0
USEFUL
OPERATION
English
21 En
Settings for each input source (Option menu)
The option menu items are listed below. These settings are
applied to the currently selected input source.
Input
Adjusting input level of each jack
(VOLUME TRIM)
OPTION
/
ENTER
RETURN
Adjustable range: –6 to +6 (Default setting: 0)
1 Press input button to select the desired input
to change the setting.
2 Press OPTION to enter option menu.
The option menu is displayed in the front panel
display.
Option menu items
The following menu items are provided for each
input.
Input
Menu item
TV/STB/
ANALOG
2.AUDIO
DELAY
HDMI1-3
1.VOLUME
TRIM
FM
3.AUDIO
ASSIGN
2.AUTO PRESET
3.CLEAR PRESET
4.STEREO/MONO
5.TRAFFIC PROG*1
2.REPEAT
3.SHUFFLE*2
USB
*1 See the page 13 for details.
*2 See the page 17 for details.
3 Press
/
to select the menu and press
ENTER.
4 Press
/
to change the setting value
and press ENTER.
5 Press OPTION to exit the option menu.
Press RETURN to return to the previous menu.
22 En
Menu: 1.VOLUME TRIM
Adjust the input level for each jack to compensate for
variations in volume between different input devices.
Adjusting the audio delay
(AUDIO DELAY)
Menu: 2.AUDIO DELAY
Flat panel display TV images sometimes lag behind the
sound. You can use this function to delay the sound output
to synchronize it with the video image.
Adjustable range: 0ms to 500ms, AUTO
(Default setting: “AUTO”)
“AUTO”: If you operate HDMI connection to a TV with
the function to automatically adjusting the audio delay,
you can adjust the delay time automatically.
Assigning the audio input to
optical/coaxial digital input
(AUDIO ASSIGN)
Menu: 3.AUDIO ASSIGN
If a component’s HDMI jack does not carry audio signal,
select HDMI input and use the optical/coaxial input jack
connection for audio.
Available options (Default setting: HDMI)
“HDMI”: Selects HDMI audio signal
“OPTICAL”: Selects the audio signal from optical input
jack
“COAXIAL”: Selects the audio signal from coaxial input
jack
Operating the unit by TV’s remote control
What is the HDMI control function?
(Power)
You can use the TV remote control to operate this unit if
your TV supports the HDMI control function (ex. REGZA
Link) and is connected to this unit’s HDMI OUT (ARC)
jack. *1
Input
selector
Remote control of TV (Example)
Power on/off
Switches input
This unit automatically selects
the input according to the
input source setting on the
TV. Switching input on TV
menu (ex. selecting BD player
on TV menu) also changes
input of this unit.
Selects a component to
reproduce sounds (this
unit or TV)
*1 y
• Some TV supports switching the UniVolume function on/off
except the above.
• Even if your TV supports the HDMI control function, some
functions may not be available. For details, refer to the manual
supplied with your TV.
• If you use HDMI to connect this unit to a device such as a BD
player that supports HDMI control, you can control that device
using the HDMI control function.
• We suggest that you use products (TV, BD/DVD player, etc.)
from the same manufacturer.
1 Turn on all components connected to this
unit with HDMI.
2 Check all components connected with HDMI
and enable the HDMI control function on
each component.
For this unit, set “3-1:CONTROL” in the setup menu
“3:HDMI SETUP” to “ON” (☞ P. 19). *2
For external components, refer to the manual
supplied with each component. *3
3 Turn off the TV and then turn on it again.
*2 y
• The default setting is “OFF”.
When “3-1:CONTROL” in the “3:HDMI SETUP” is set to
“ON” in setup menu,
– Even you press (Power) button, the power does not
completely turned off and the signal outputs from the HDMI
IN jack to HDMI OUT (ARC) jack.
– Before turning off the unit, select desired input sources
connected to HDMI IN (1 to 3) jack.
– According to the TV, the TV operation such as changing the
channel may change the setting of surround modes of this
unit.
USEFUL
OPERATION
Volume up/down
Setting the HDMI control function
*3 y
The example of TV settings
• From a setup menu on your TV, select “Link setting” → “HDMI
control setting” (example), then set a setting such as “HDMI
control function” to “ON” (example).
• Setting such as “Speaker priority” should be set to “AV
amplifier”.
English
23 En
Operating the unit by TV’s remote control
Registering HDMI components to
TV *4
Changing the connection method
and connected components
the connected components and jacks are changed,
1 Select this unit as the input source of the TV. When
reset this unit with following procedures.
2 Turn on the HDMI control function supported 1 Turn off the HDMI control function of the TV
component (example: BD player) connected
to this unit.
3 Select the input source of this unit to BD
player and check whether the image in the
player is correctly displayed or not.
When connecting BD player with HDMI 1 jack,
press input selector button repeatedly to select
“HDMI 1”.
4 Check if the HDMI control function works
(turn on this unit or adjust the volume level
using the remote control of the TV).
*4 y
For some HDMI components, you only need to set the HDMI
control function. Registering HDMI components to TV is not
required in this case.
If the HDMI control function is not working
Check the following:
– The TV is connected to the HDMI OUT (ARC) jack
of this unit.
– “3-1:CONTROL” in the “3:HDMI SETUP” is set to
“ON” in setup menu. (☞ P. 19)
– The HDMI control function is enabled on the TV.
(Also check the relative settings such as power
interlock function or speaker priority.)
The HDMI control function is not working even
checking the above,
– Turn off this unit and the TV, and then turn them
back on again.
– Disconnect the AC power supply cable of the unit
and external components connected to the unit with
HDMI.
Plug them in again after about 30 seconds.
– After selecting HDMI 1, HDMI 2 or HDMI 3,
change the input of TV and the one of this unit to
the same input.
24 En
and player, turn off all connected devices,
and change the connections.
2 Perform the step 1 to 3 of “Setting the HDMI
control function”.
ADDITIONAL INFORMATION
Troubleshooting
Refer to the chart below should this unit not function properly.
If the problem you are experiencing is not listed below, or if the instruction below does not help, set this unit to the
standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service
center.
Check the below first.
1 The AC power supply cable of this unit, TV and external components (such as BD player) are firmly connected to the
AC wall outlet.
2 The power supply of this unit, TV and the external components (such as BD player) are turned on.
3 All cables are firmly connected to their respective jacks on each component.
Problem
Power turns on but
immediately shuts off.
The speakers make no
sound.
Cause
Solution
See
page
The power cable may be connected
improperly.
Make sure the power cable is plugged into the
outlet firmly.
8
A speaker cable may be shorted.
Make sure all speaker cables are connected
properly.
8
This unit may have received a strong
electrical shock, such as from a
lightening bolt or excessive static
electricity.
Set this unit to standby mode, and then
disconnect the power cable. Wait for about 30
seconds, connect the power cable, and then turn
the unit on again.
10
The volume may be set to minimum
level.
Adjust the volume level.
The mute function may be activated.
Cancel the mute function.
The input source or input setting may be
incorrect.
Select the correct input source or input setting.
The cables may be connected improperly.
Make sure all cables are connected properly.
8
“3-2:AUDIO” in the setup menu
“3:HDMI SETUP” is set to “TV”.
Set “3-2:AUDIO” in the setup menu “3:HDMI
SETUP” to “AMP”.
19
“3-1:CONTROL” in the setup menu
“3:HDMI SETUP” is set to “OFF” in
setup menu.
When connecting ARC (Audio Return Channel)
supported TV and this unit using HDMI cable
only, set “3-1:CONTROL” in the “3:HDMI
SETUP” to “ON”.
19
Connect coaxial digital input jack and TV’s
audio output jack using a digital audio pin cable.
9
10, 19
10
10
Sound is too low on
one side.
The cables may be connected improperly.
Make sure all cables are connected properly.
Speaker channels
other than the front
ones make no sound.
You may be listening to stereo sounds
without surround mode.
Press the SURROUND button to play back in
sound mode.
“1:SP LEVEL” in the setup menu
“1-4:SURROUND L”/“1-5:SURROUND R”
is set to minimum level.
Adjust “1:SP LEVEL” in the setup menu
“1-4:SURROUND L”/“1-5:SURROUND R”.
“5-1:SP CHANNEL” is set to “2CH” or
“3CH” in setup menu.
Set “5-1:SP CHANNEL” to “4CH” or “5CH”.
The volume of the subwoofer channel
may be set to minimum level.
Adjust the volume level of the subwoofer.
The subwoofer makes
no sound.
ADDITIONAL
INFORMATION
The headphone is connected.
8
11
19
20
5, 19
English
The source does not contain lowfrequency signals.
25 En
Troubleshooting
Problem
Cause
Solution
See
page
The volume level
decreases without any
operation.
The volume level is automatically set to
70 the next time you turn on the unit to
protect the speakers.
Sound is poor (noisy).
A speaker cable may be shorted.
Make sure all cables are connected properly.
8
This unit does not
operate properly.
This unit may receive a strong electrical
shock, such as from a lightening bolt or
excessive static electricity, or drop in
power supply.
Set this unit to standby mode, and then
disconnect the power cable. Wait for about 30
seconds, connect the power cable, and then turn
on this unit.
10
A digital or highfrequency equipment
produces noises.
The unit may be placed close to digital
equipment or high-frequency equipment.
Place this unit farther away from such
equipment.
—
The unit settings
change automatically.
When “3-1:CONTROL” in the setup
menu “3:HDMI SETUP” is set to “ON”,
operations of the TV (for example,
changing channels, etc.) may change the
unit settings, such as the surround mode.
Set “3-1:CONTROL” in the setup menu
“3:HDMI SETUP” to “OFF” or set the unit
again by using its remote control.
19
The unit may be outside the remote
control operation range.
For information on the remote control operation
range, refer to “Remote control preparation”.
The remote control sensor of this unit
may be exposed to direct sunlight or
lighting.
Change the lighting.
The batteries may be worn out.
Replace the batteries.
2
The position of TV remote signal
receptor is not appropriate.
Move the TV remote signal receptor to right/left
so as to place its center to the front of TV
remote control sensor.
6
Place the TV remote signal receptor
approximately 10 mm away from TV.
6
The TV remote signal receptor is facing
an incompatible sensor, such as a sensor
for detecting the brightness of the room.
Place the TV remote signal receptor after
confirming the position of remote control sensor
by referring to the manual of your TV.
6
Cause
Solution
See
page
The remote control
does not operate the
unit.
The TV remote control
does not work even
when the remote signal
receptor is attached to
the top of the speaker.
2
—
■ HDMI
Problem
“AUTO” set in the
option menu “2.AUDIO
DELAY” does not
operate.
The TV does not support automatically
adjusting the audio delay.
Adjust the delay time manually (0 to 500 ms).
The HDMI control
function does not
operate properly.
The number of the connected HDMI
components is over the limit.
Disconnect some of the HDMI components.
Add the connection of HDMI
components
Set “3-1:CONTROL” in the “3:HDMI SETUP”
to “ON” again.
The connected HDMI component does
not support high-bandwidth digital
copyright protection (HDCP).
Connect the HDMI component that supports
HDCP.
No picture or sound
26 En
22
—
19
—
Troubleshooting
■ FM
Problem
Cause
FM stereo reception is
noisy.
The characteristics of FM stereo
broadcasts may cause this problem when
the transmitter is too far away, or if the
antenna quality is poor.
There is distortion, and
clear reception cannot
be obtained, even with
a good FM antenna.
There is multi-path interference.
The desired station
cannot be tuned into
with the automatic
tuning method.
The signal is too weak.
Solution
See
page
Check the antenna connections.
9
Try using a high-quality directional FM
antenna.
—
Set the reception mode to “MONO”.
14
Adjust the antenna position to eliminate multipath interference.
Use a high-quality directional FM antenna.
—
—
Set the reception mode to “MONO” and press
TUNING
step.
/
to change frequency by 1
13, 14
■ Messages for iPod/iPhone and USB device
Note
Confirm the connection of your device if any malfunctions except the following message in the front panel display occurred. (☞ P. 16)
Status message
Cause
Solution
See
page
The iPod/iPhone or USB device being
used is not supported by this unit.
Connect a supported iPod/iPhone or USB device
to this unit.
16
No Device
An iPod/iPhone or USB device is not
connected to this unit.
Connect an iPod/iPhone or USB device in which
playback enabled music files are saved.
—
Loading...
The iPod/iPhone or USB device is in data
processing.
The message disappears when data processing
finishes.
—
No Content
There is no music file to enable playback.
Connect an iPod/iPhone or USB device in which
playback enabled music files are saved.
—
The music file cannot be read.
See whether the music file can be played back by
another device such as a PC.
—
The format of the selected music file is
not supported.
Save the music file in a supported format.
The selected music file is broken.
Select another music file.
—
Connect Error
The iPod/iPhone or USB device has a
problem with communication.
Set this unit to the standby mode and reconnect
the iPod/iPhone or USB device again.
—
Root
Stops and returns to the root directory.
The message disappears when playback starts.
—
Disconnected
An iPod/iPhone or USB device has been
removed from the USB port of this unit.
The message disappears after 3 seconds.
Unable to Play
—
ADDITIONAL
INFORMATION
Unknown iPod
16
English
27 En
Troubleshooting
■ Messages for firmware update
Status message
Cause
Solution
See
page
Connect USB!
An USB flash memory is not connected.
Connect the USB flash memory to this unit.
No Firmware!
There is no file for firmware in the USB
flash memory connected to this unit.
Copy the firmware update file to the root
directory of the USB flash memory.
—
There is a fault with the file in the USB
flash memory.
Turn the unit to the standby mode and reconnect
the USB flash memory again.
—
Connect Error
The USB flash memory connected to this
unit has a problem with communication
because the selected file in it is broken.
Copy the firmware update file to the USB flash
memory again.
Update...
Displays the process of updating.
30%
Update Error
Error occurs while updating and the
firmware update is not completed.
Update firmware again.
Update Success
The firmware update is finished properly.
Plaese...
Indicates to turn the unit to standby mode.
Displays alternately “Update Success” or
“Update Error”.
Turn the unit to standby mode.
Power Off!
Indicates to turn the unit to standby mode.
Displays alternately “Update Success” or
“Update Error”.
Turn the unit to standby mode.
—
17
—
y Resetting this unit
When the unit freezes, the problem may solve by resetting the unit.
To reset the unit, press
(Power) button of this unit for more than 10 seconds.
28 En
17
—
Glossary
■ AIR SURROUND XTREME
■ Sampling frequency
Ordinarily, two front speakers, a center speaker, two
surround speakers, two surround back speakers, and a
subwoofer are necessary for enjoying 7.1 channel
surround sound.
■ Dolby Digital
This unit employs new technologies and algorithms that
make it possible to achieve 7-channel surround sound with
only front speakers, and without using wall reflections.
Typical 7.1 channel speaker unit
Front speakers
Subwoofer
Surround speakers
Center
speaker
Surround back speakers
Virtual 7.1 channel
The AIR SURROUND XTREME technology, using only
front speakers and subwoofer, enables you to enjoy a
realistic 7.1 channel sound by simulating sound from
virtual speakers at center, surround, and surround backs.
The sound image of the unit
The number of sampling (process for digitalizing analog
signals) per second. In principle, the higher the sampling
rate, the wider the frequency range that can be played
back, and the higher the quantized bit rate, the finer the
sound that can be reproduced.
Digital surround sound system which is developed by
Dolby Laboratories provides completely independent
multi-channel audio. With 3 front channels (left, center,
and right) and 2 surround stereo channels, Dolby Digital
provides five full-range audio channels. With an
additional channel especially for bass effects (called LFE,
or low frequency effect), the system has a total of 5.1
channels (LFE is counted as 0.1 channel). By using 2
channel stereo for the surround speakers, more accurate
moving sound effects and surround sound environment
are possible than with Dolby Surround.
■ Dolby Digital Plus
Dolby Digital Plus is an advanced audio technology
developed for high-definition programming and media
including HD broadcasts, and Blu-ray Disc. Selected as an
optional audio standard for Blu-ray Disc, this technology
delivers multichannel sound with discrete channel output.
Supporting bitrates up to 6.0 Mbps, Dolby Digital Plus
can carry up to 7.1 discreet audio channels
simultaneously. Supported by HDMI and designed for the
optical disc players and AV receivers/amplifiers of the
future, Dolby Digital Plus also remains fully compatible
with the existing multichannel audio systems that
incorporate Dolby Digital.
The unit creates the virtual 7.1 channel surround sound
with the subwoofer integrated receiver and the speaker.
C: Center speaker
FR, FL: Front speakers
SW: Subwoofer
SR, SL: Surround virtual speakers
SBR, SBL: Surround back virtual speakers
It is an improved matrix decoding technology that
provides better spatiality and directionality on Dolby
Surround programmed material; provides a convincing
three-dimensional sound field on conventional stereo
music recordings; and is ideally suited to bring the
surround experience to automotive sound. While
conventional surround programming is fully compatible
with Dolby Pro Logic II decoders, soundtracks will be
able to be encoded specifically to take full advantage of
Pro Logic II playback, including separate left and right
surround channels.
ADDITIONAL
INFORMATION
■ Dolby Pro Logic II
English
29 En
Glossary
■ Dolby TrueHD
Dolby TrueHD is an advanced lossless audio technology
developed for high-definition disc-based media including
Blu-ray Disc. Selected as an optional audio standard for
Blu-ray Disc, this technology delivers sound that is bitfor-bit identical to the studio master, offering a highdefinition home theater experience. Supporting bitrates up
to 18.0 Mbps, Dolby TrueHD can carry up to 8 discrete
channels of 24-bit/96 kHz audio simultaneously. Dolby
TrueHD also remains fully compatible with the existing
multichannel audio systems and retains the metadata
capability of Dolby Digital, allowing dialog normalization
and dynamic range control.
■ Deep Color
Deep Color refers to the use of various color depths in
displays, up from the 24-bit depths in previous versions of
the HDMI specification. This extra bit depth allows
HDTVs and other displays go from millions of colors to
billions of colors and eliminate on-screen color banding
for smooth tonal transitions and subtle gradations between
colors. The increased contrast ratio can represent many
times more shades of gray between black and white. Also
Deep Color increases the number of available colors
within the boundaries defined by the RGB or YCbCr color
space.
■ DTS
Digital surround sound system developed by DTS, Inc.,
which provides 5.1 channel audio. With an abundance of
audio data, it is able to provide authentic-sounding effects.
■ DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a high resolution
audio technology developed for high-definition disc-based
media including Blu-ray Disc. Selected as an optional
audio standard for Blu-ray Disc, this technology delivers
sound that is virtually indistinguishable from the original,
offering a high-definition home theater experience.
Supporting bitrates up to 6.0 Mbps for Blu-ray Disc, DTSHD High Resolution Audio can carry up to 7.1 discrete
channels of 24-bit/96 kHz audio simultaneously.
■ DTS-HD Master Audio
The lossless high quality audio format created for next
generation optical disc such as Blu-lay Disc. It is selected
as an audio standard for Blu-ray Disc. Supporting bitrates
up to 24.5 Mbps for Blu-ray Disc, DTS-HD High Master
Audio can carry up to 7.1 discrete channels of 24-bit/96
kHz audio simultaneously.
■ DTS Neo:6
Neo:6 decodes the conventional 2-channel sources for 6channel playback by the specific decoder. It enables
playback with the full-range channels with higher
separation just like digital discrete signal playback. Two
modes are available: Music mode for playing music
sources and Cinema mode for movies.
30 En
■ HDMI
HDMI (High-Definition Multimedia Interface) is the first
industry supported, uncompressed, all-digital audio/video
interface. When used in combination with HDCP (Highbandwidth Digital Content Protection), HDMI provides a
secure audio/video interface that meets the security
requirements of content providers and system operators.
■ MP3
One of the audio compression methods used by MPEG. It
employs the irreversible compression method, which
achieves a high compression rate by thinning out the data
of hardly audible part to the human ears. It is said to be
capable of compressing the data quantity by about 1/11
(128 kbps) while maintaining a similar audio quality to
music CD.
■ MPEG-4 AAC
An MPEG-4 audio standard. As it allows compression of
data at a bit rate lower than that of MPEG-2 AAC, it is
used among others for mobile telephones, portable audio
players and other low-capacity devices requiring high
sound quality. In addition to the above types of devices,
MPEG-4 AAC is also used to distribute contents on the
Internet, and as such is supported by computers, media
servers and many other devices.
■ PCM (Pulse Code Modulation)
A signal that is changed to digital format without
compression. A CD is recorded with 16-bit sound at 44.1
kHz, while DVD recording is anywhere from 16 bits at 48
kHz to 24 bits at 192 kHz, which makes it a higher quality
sound than CD.
■ WMA
An audio compression method developed by Microsoft
Corporation. It employs the irreversible compression
method, which achieves a high compression rate by
thinning out the data of hardly audible part to the human
ears. It is said to be capable of compressing the data
quantity by about 1/22 (64 kbps) while maintaining a
similar audio quality to music CD.
■ x.v.Color
A color space standard supported by HDMI. It is a more
extensive color space than sRGB, and allows the
expression of colors that could not be expressed before.
While remaining compatible with the color gamut of
sRGB standards, “x.v.Color” expands the color space and
can thus produce more vivid, natural images. It is
particularly effective for still pictures and computer
graphics.
Specifications
■ SR-301
AUDIO SECTION
• Minimum RMS Output Power
Front Left and Right (1 kHz, 1% THD, 6 Ω) .................45 W+45 W
Center (1 kHz, 1% THD, 6 Ω)...................................................45 W
Surround Left and Right (1 kHz, 1% THD, 6Ω) ............45 W+45 W
Subwoofer (100 Hz, 1% THD, 3 Ω)..........................................90 W
• Maximum Power
Front Left and Right (1 kHz, 10% THD, 6 Ω) ...............50 W+50 W
Center (1 kHz, 10% THD, 6 Ω).................................................50 W
Surround Left and Right (1 kHz, 10% THD, 6Ω) ..........50 W+50 W
Subwoofer (100 Hz, 10% THD, 3 Ω)......................................100 W
FM SECTION
• Tuning Range
[U.S.A. and Canada models] ............................... 87.5 to 107.9 MHz
[Other models] ................................................. 87.50 to 108.00 MHz
• Frequency Step
[U.S.A. and Canada models] ................................................ 200 kHz
[Other models] ........................................................................ 50 kHz
Antenna Input (unbalanced) .......................................................75 Ω
SUBWOOFER SECTION
• Type ..........................................................................Bass reflex type
Non-magnetic shielding type
• Driver............................................................... 13 cm (5-1/4 in) cone
• Frequency Response ................................................ 35 Hz to 150 Hz
• Impedance.....................................................................................3 Ω
GENERAL
• Power Supply
[U.S.A. and Canada models]................................... AC120 V, 60 Hz
[Europe, U.K., Korea and Asia models] .....AC220-240 V, 50/60 Hz
[Taiwan model] .................................................... AC110V, 60/50Hz
• Power Consumption .................................................................. 40 W
• Standby Power Consumption
When HDMI control is on
[U.S.A. and Canada models].........................................less than 5 W
[Europe, U.K., Korea and Asia models] .......................less than 5 W
[Taiwan model] .............................................................less than 5 W
When HDMI control is off
[U.S.A. and Canada models]......................................less than 0.5 W
[Europe, U.K., Korea and Asia models] ....................less than 0.5 W
[Taiwan model] ..........................................................less than 0.5 W
• Dimensions (W × H × D)
Horizontal......................................................... 435 × 135 × 361 mm
(17-1/8 × 5-3/8 × 14-1/4 in)
Upright ....................................................... 145.5 × 443.5 × 361 mm
(5-3/4 × 17-1/2 × 14-1/4 in)
• Weight .....................................................................7.9 kg (17.4 Ibs.)
■ NS-BR301
• Type..........................................................Accoustic suspension type
Non-magnetic shielding type
• Driver (Full range)
Left and Right .................................................5.5 cm (2 in) cone × 2
Center ............................................4 × 10 cm (1-1/2 × 4 in) cone × 1
• Frequency Response...............................................150 Hz to 20 kHz
• Impedance .................................................................................... 6 Ω
• Dimensions (W × H × D) ...............................800 × 97*1 × 79.5 mm
(31-1/2 × 3-7/8 × 3-1/8 in)
*1 Adjustable in 4 steps: 84 mm to 100 mm (from 3-3/8 in to 3-7/8
in)
• Without stands...................................................... 800 × 79 × 70 mm
(31-1/2 × 3-1/8 × 2-3/4 in)
• Weight .......................................................................1.5 kg (3.3 Ibs.)
* Specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. Dolby, Pro
Logic and the double-D symbol are trademarks of Dolby
Laboratories.
“HDMI,” the “HDMI” logo and “High-Definition Multimedia
Interface” are trademarks, or registered trademarks of HDMI
Licensing LLC.
“x.v.Color” is a trademark of Sony Corporation.
English
Manufactured under license under U.S. Patent Nos: 5,956,674;
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195;
7,272,567 & other U.S. and worldwide patents issued & pending.
DTS-HD, the Symbol, & DTS-HD and the Symbol together are
registered trademarks of DTS, Inc. Product includes software. © DTS,
Inc. All Rights Reserved.
ADDITIONAL
INFORMATION
This system employs new technologies and algorithms that make it
possible to achieve 7-channel surround sound with only front
speakers, and without using wall reflections.
iPod, iPhone
“Made for iPod,” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifically to iPod, or
iPhone, respectively, and has been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
iPhone, iPod, iPod classic, iPod nano, iPod touch and iTunes are
trademarks of Apple Inc., registered in the U.S. and other countries.
“UniVolume” is a trademark of Yamaha Corporation.
31 En
Specifications
Available signal information
■ HDMI signal compatibility
Receivable audio signals
Audio signal types
Audio signal formats
Compatible media
2ch Linear PCM
2ch, 32-192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio, etc.
Multi-ch Linear PCM
8ch, 32-192 kHz, 16/20/24 bit
DVD-Audio, Blu-ray disc, HD DVD, etc.
Bitstream
DTS-HD Master Audio, DTS-HD High
Resolution Audio, DTS, Dolby TrueHD, Dolby
Digital Plus, Dolby Digital
DVD-Video, Blu-ray disc etc.
y
• Refer to the supplied instruction manuals of the input source component, and set the component appropriately.
• When CPPM copy-protected DVD-Audio is played back, video and audio signals may not be output depending on the type of the
DVD player.
• This unit is not compatible with HDCP-incompatible HDMI or DVI components. Refer to the supplied instruction manuals of HDMI
or DVI components for HDCP compatibility.
• To decode audio bitstream signals on this unit, set the input source component appropriately so that the component outputs the
bitstream audio signals directly (does not decode the bitstream signals on the component). Refer to the supplied instruction manuals
for details.
Receivable video signals
– This unit is compatible with the video signals of the following resolutions:
• 480i/60 Hz
• 576i/50 Hz
• 480p/60 Hz
• 576p/50 Hz
• 720p/60 Hz, 50 Hz
• 1080i/60 Hz, 50 Hz
• 1080p/60 Hz, 50 Hz, 24 Hz
– Deep Color
– x.v.Color
– 3D video signal
y
The compatible video signal is changed depending on the connected TV.
■ Digital audio signal (optical/coaxial)
Audio signal types
Audio signal formats
Compatible media
2ch Linear PCM
2ch, 32-96 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio, etc.
Bitstream
Dolby Digital, Dolby Digital EX, DTS, DTSES
DVD-Video, etc.
■ iPod/iPhone/USB device
Available sound data compression format
• WAV (8kHz to 48kHz, 16bit)
• MP3 (8kHz to 48kHz, 5kbps to 320kbps)
• WMA (8kHz to 48kHz, 5kbps to 384kbps)
• MPEG4-AAC (8kHz to 48kHz, 8kbps to 320kbps)
32 En
Specifications
Notes on the remote control and batteries
• Be careful not to spill liquid on the remote control.
• Be careful not to drop the remote control.
• Do not leave the remote control in a place that is:
– hot or humid, such as near a heater or in a bathroom
– extremely cold
– dusty
• If the effective operation distance of the remote control decreases considerably, replace the batteries with two new
ones as soon as possible.
• Do not use an old battery together with new one.
• Do not use different types of batteries (for example, alkaline and manganese) together.
Their performance will vary, even if they are similar in shape.
• If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.
• Dispose of batteries according to regional regulations.
• If a battery starts leaking, dispose of it immediately. Be careful not to let leaking battery acid come into contact with
your skin or clothing. Before inserting new batteries, wipe the compartment clean.
• Keep batteries away from children. If a battery is accidentally swallowed, contact your doctor immediately.
• When not planning to use the remote control for long periods of time, remove the batteries from the remote control.
• Do not charge or disassemble the supplied batteries.
ADDITIONAL
INFORMATION
English
33 En
Printed in Indonesia ZD56480-1