Samsung GSM/DCSI1800 Owner`s manual

Dual Band GSM/DCS1800
SGH-2200
OWNER’S MANUAL
Printed in Korea
Code No.:GH68-00650A
English. 8/99. Rev.1.0
Contents
Safety Precautions . . . . . . . . . . . . . . . . . 7
Unpacking . . . . . . . . . . . . . . . . . . . . . . . 9
Your Phone. . . . . . . . . . . . . . . . . . . . . . 10
Phone Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Getting Started . . . . . . . . . . . . . . . . . . 15
Your First Call . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installing the SIM Card . . . . . . . . . . . . . . . . . . 16
Charging a Battery . . . . . . . . . . . . . . . . . . . . . . 19
Switching the Phone On/Off . . . . . . . . . . . . . . 21
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using the Earphone . . . . . . . . . . . . . . . . . . . . . .25
General Functions . . . . . . . . . . . . . . . . . 26
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . 28
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . 29
Viewing Missed Calls . . . . . . . . . . . . . . . . . . . . 30
Selecting Functions and Options . . . . . . . 31
Example: Setting the Text Language . . . . . . . . 33
Phonebook . . . . . . . . . . . . . . . . . . . . . 35
Storing a Phone Number with a Name . . . . . 35
Speed Dialling . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Searching for and Dialling a Number
in the Phonebook . . . . . . . . . . . . . . . . . . . . . . . 38
Phonebook Options . . . . . . . . . . . . . . . . . . . . . 39
3
Contents (continued)
In-Call Options . . . . . . . . . . . . . . . . . . . 41
Switching the Microphone Off (Mute) . . . . . . 41
Searching for a Number in the Phonebook . . 42
Putting a Call on Hold . . . . . . . . . . . . . . . . . . . . 43
Answering a Second Call . . . . . . . . . . . . . . . . 44
Making a Multiparty Call . . . . . . . . . . . . . . . . . 45
Rejecting a Waiting Call . . . . . . . . . . . . . . . . . . 47
Muting/Sending Key Tones . . . . . . . . . . . . . . . 47
Using the SMS Service . . . . . . . . . . . . . . . . . . 47
Using the Menus . . . . . . . . . . . . . . . . . 48
Using the Soft Keys . . . . . . . . . . . . . . . . . . . . . 48
Using the Index System . . . . . . . . . . . . . . . . . . 49
Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Quick Access . . . . . . . . . . . . . . . . . . . . 54
Connect to Voice Mail (Menu 1-1) . . . . . . . . . . 54
Voice Mail Setup (Menu 1-2) . . . . . . . . . . . . . . 54
Service Directory (Menu 1-3) . . . . . . . . . . . . . . 54
Call Records . . . . . . . . . . . . . . . . . . . . . 55
Last Dialled Calls (Menu 2-1) . . . . . . . . . . . . . . 55
Last Received Calls (Menu 2-2) . . . . . . . . . . . . 55
Last Missed Calls (Menu 2-3) . . . . . . . . . . . . . . 56
Delete Recent Calls (Menu 2-4) . . . . . . . . . . . . 56
Call Cost and Duration (Menu 2-5) . . . . . . . . . . 57
Short Messages . . . . . . . . . . . . . . . . . . 58
Read All Messages (Menu 3-1) . . . . . . . . . . . .58
Create Message (Menu 3-2) . . . . . . . . . . . . . . . 59
Message Setup (Menu 3-3) . . . . . . . . . . . . . . . 60
Broadcast (Menu 3-4) . . . . . . . . . . . . . . . . . . . . 61
4
Contents (continued)
Sound Settings . . . . . . . . . . . . . . . . . . . 62
Ring Type (Menu 4-1) . . . . . . . . . . . . . . . . . . . . 62
Ring Volume (Menu 4-2) . . . . . . . . . . . . . . . . . . 62
Alert Type (Menu 4-3) . . . . . . . . . . . . . . . . . . . . 62
Keytone Type (Menu 4-4) . . . . . . . . . . . . . . . . . 63
Keytone Volume (Menu 4-5) . . . . . . . . . . . . . . . 63
Message Alert (Menu 4-6) . . . . . . . . . . . . . . . . 63
Warning Tone (Menu 4-7) . . . . . . . . . . . . . . . . . 64
Minute Tone (Menu 4-8) . . . . . . . . . . . . . . . . . . 64
Phone Settings . . . . . . . . . . . . . . . . . . . 65
Greeting Message (Menu 5-1) . . . . . . . . . . . . . 65
Own Number (Menu 5-2) . . . . . . . . . . . . . . . . . 66
Language List (Menu 5-3) . . . . . . . . . . . . . . . . . 66
Any Key Answer (Menu 5-4) . . . . . . . . . . . . . . . 67
Backlight Time (Menu 5-5) . . . . . . . . . . . . . . . . 67
Auto Redial (Menu 5-6) . . . . . . . . . . . . . . . . . . . 68
Auto Answer (Menu 5-7) . . . . . . . . . . . . . . . . . . 68
Caller Number (Menu 5-8) . . . . . . . . . . . . . . . . 69
Factory Reset (Menu 5-9) . . . . . . . . . . . . . . . . . 69
Clock Settings . . . . . . . . . . . . . . . . . . . 70
Alarms (Menu 6-1) . . . . . . . . . . . . . . . . . . . . . . . 70
Time Setup (Menu 6-2) . . . . . . . . . . . . . . . . . . . 71
Security Settings. . . . . . . . . . . . . . . . . . 73
PIN Access (Menu 7-1) . . . . . . . . . . . . . . . . . . 73
Change Codes (Menu 7-2) . . . . . . . . . . . . . . . . 74
Phone Lock (Menu 7-3) . . . . . . . . . . . . . . . . . . . 74
Phonebook Lock (Menu 7-4) . . . . . . . . . . . . . . .75
Fixed Dialling Number (Menu 7-5) . . . . . . . . . . 75
5
Contents (continued)
Network Services . . . . . . . . . . . . . . . . . 76
Call Divert (Menu 8-1) . . . . . . . . . . . . . . . . . . . 76
Call Barring (Menu 8-2) . . . . . . . . . . . . . . . . . . . 78
Call Waiting (Menu 8-3) . . . . . . . . . . . . . . . . . . 79
Caller Identity (Menu 8-4) . . . . . . . . . . . . . . . . . 80
Closed User Group (CUG) (Menu 8-5) . . . . . . . 81
Network Selection . . . . . . . . . . . . . . . . 82
Selection (Menu 9-1) . . . . . . . . . . . . . . . . . . . . . 82
Preferred List (Menu 9-2) . . . . . . . . . . . . . . . . . 83
User Define List (Menu 9-3) . . . . . . . . . . . . . . . 84
Solving Problems . . . . . . . . . . . . . . . . . 85
Using the Batteries . . . . . . . . . . . . . . . . 88
Precautions When Using Batteries . . . . . . . . 88
Safety Information . . . . . . . . . . . . . . . . 90
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Operating Environment . . . . . . . . . . . . . . . . . . 90
Care and Maintenance . . . . . . . . . . . . . . . . . . 92
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . 93
Glossary of Terms . . . . . . . . . . . . . . . . . 94
Index. . . . . . . . . . . . . . . . . . . . . . . . . . 98
6
Safety Precautions
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal.
For more detailed safety information, see Safety
Information on page 90.
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in aircraft
Mobile phones can cause interference. Using them on
aircraft is both illegal and dangerous.
Respect special regulations
Follow any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger
(in a hospital for example).
Interference
All mobile phones may be subject to radio
interference, which may affect their performance.
7
Safety Precautions
Qualified service
Only qualified service personnel must repair cellular
equipment. Use only approved accessories and
batteries.
Use sensibly
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency calls
Ensure the phone is switched on and in service.
Enter the emergency number (112 or another official
emergency number) and press
. Give your location.
Do not end the call until given permission to do so. End
the call by closing the flip cover or pressing
.
IMPORTANT! Use only SAMSUNG-approved
accessories. This phone is intended for use with a
SAMSUNG-approved:
• Travel adapter (TA12)
• Desktop charger (DTC33)
• Cigarette lighter adapter (CLA12)
The use of any other power accessory will invalidate
any approval or warranty applying to the phone, and
may be dangerous.
When you disconnect the power cord of any
accessory, grasp and pull the connector, not the cord.
8
Unpacking
Your package contains the following items.
Phone
Travel Adapter
(TA12)
Standard Battery
(BTL1030M)
Owner’s Manual
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
• Desktop charger (DTC33)
• Cigarette lighter adapter (CLA12)
• Hands-free car kit (HFK220G)
• Slim, standard and long-life batteries (BTL631S,
BTL1030M, BTL1630L)
• Data kit (DC010G)
• Earphone (EP010G); depending on the country, may
be supplied in the standard package
9
Your Phone
Phone Layout
The following illustration shows the main elements of
your phone.
Service light
Antenna
Earphone jack
Earpiece
Volume/menu
browse keys
Display
Cancel/
correction key
Soft key (right)
Power on/off
key
Soft key (left)
Dial key
Alphanumeric
keys
Battery
Special function
keys
Microphone
Flip cover
Key
Description
Perform the functions indicated by the text
above them (in the bottom line of the display).
10
Your Phone
Key
Description
Deletes characters from the display.
In the menu facility, returns to the previous
menu level.
Makes or answers a call.
In idle mode, recalls the last number dialled.
Ends a call. Also switches the phone on
and off when pressed and held.
In the menu facility, returns to the idle
mode and cancels your input.
Enter numbers, letters and some special
characters.
Enter special dial characters.
(on the left side of the phone)
During a call, adjusts the earpiece volume.
In the menu facility, scrolls through the
menu options and phonebook memory.
In idle mode with the flip cover open, recalls
the last missed call list ( key) and received
call list ( key). In the edit mode, moves the
cursor in the display.
In idle mode with the flip cover closed,
activates the backlight. When the key is
held down, changes the silence mode.
When the Any Key Answer option is Off,
and an incoming call is received, sends a
busy tone to the caller. When it is set to On,
answers the incoming call.
11
Your Phone
Display
Display Layout
The display comprises three areas.
Icons
Text and
graphic area
Menu
Phonebook
Soft key
indications
Area
Description
First line
Displays various icons (see opposite).
Middle lines
Display messages, instructions and
any information that you enter
(number to be dialled, for example).
Last line
Shows the functions currently
assigned to the two soft keys.
12
Your Phone
Icons
Icon
Description
Shows the received signal strength. The
greater the number of bars, the better the
signal strength.
Appears when a call is in progress.
Appears when a new short message has
been received.
If the message memory is full, the icon
flashes.
Appears when a new voice mail message
has been received.
Appears when you are out of your home
area and have registered with a different
network (when travelling in other countries,
for example).
Shows the level of your battery. The more
bars you see, the more power you have
left.
13
Your Phone
Backlight
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
illuminates. It turns off if no key is pressed within a
given period of time, depending on the Backlight
Time option set in the Phone Settings menu. The
backlight remains on at all times when the phone is
connected to a car kit (optional).
To specify the length of time for which the backlight
is active, set the Backlight Time menu option (5-5);
see page 67 for further details.
Service Light
The service light is in the top left-hand corner of the
phone. It flashes when:
• Services are available on the phone
• Incoming calls are received
• Short messages are received (provided that the
Message Alert menu option (4-6) is set to Light;
see page 63 for further details)
14
Getting Started
Your First Call
The following diagram explains the main steps required
when making your first call and indicates the pages on
which you can find more detailed instructions.
Insert the SIM card
(phone switched off
and battery removed)
Page 16
Charge the phone
battery
Page 19
Switch the phone on
Page 21
Enter your PIN
Page 21
Dial the phone
number required
Page 26
When you have
finished, end the call
Page 26
15
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details (PIN, optional services available
and so on).
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches or
bending, so be careful when handling,
inserting or removing the card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding down
the
key until the display turns off.
2. Remove the battery. To do so, push and hold down
the catch above the battery on the back of the
phone and slide the battery down the phone.
Then lift the battery away.
16
Getting Started
3. Slide the SIM card lock back and hold it in
position.
4. Insert the SIM card ensuring that the cut corner is
top left and the gold contacts of the card face into
the phone.
17
Getting Started
5. Maintaining the SIM card in position, release the
SIM card lock to hold the SIM card in place.
6. Place the battery back on the phone. Slide the
battery up until it locks into place.
18
Getting Started
Charging a Battery
Your phone is powered by a rechargeable Li-Ion
battery. A travel adapter is provided with your phone.
Use only approved batteries and chargers. Ask your
local SAMSUNG dealer for further details.
The phone can be used while the battery is charging.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
180minutes.
1. Connect the lead from the travel adapter to the
bottom of the phone. Check that the arrow on
the lead connector is facing towards the front of
the phone.
2. Connect the adapter to a standard AC wall outlet.
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
19
Getting Started
3. When charging is finished, disconnect the adapter
from the power outlet.
Disconnect the adapter from the phone by
pressing the grey tabs on either side of the
connector and pulling the connector out.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display:
Low
Battery
When the battery becomes too weak for the phone
to operate, it switches off automatically.
20
Getting Started
Switching the Phone On/Off
1. Open the flip cover.
2. Hold down the
key for more than one
second to switch the phone on.
3. If the phone asks for a PIN, key in the PIN and
press the Ok soft key. For further details, see
page 23.
4. If the phone asks for a lock code, key in the lock
code and press the Ok soft key. The phone lock
code is factory set to 0000. For further details,
see page 22.
The idle screen, illustrated below, is displayed.
<SERVICE PROVIDER>
Menu
12:57
Fri 14 May
Phonebook
Note: The display language is factory set to English.
To change the language, use the Language
List menu option (5-3); for further details, refer
to page 66.
5. When you wish to switch the phone off, hold down
the
button for more than two seconds.
21
Getting Started
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
When requested for any of the codes explained
below, key in the appropriate code (displayed as
asterisks) and press the Ok soft key. If you make a
mistake, press C one or more times until the
incorrect digit is cleared and then continue entering
the correct code.
The access codes (except for the PUK and PUK2
codes) can be changed using Security Settings
menu options. See page 73 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 112, so that
you do not dial an emergency number
accidentally.
Phone Lock Code
The Phone Lock feature uses the phone lock code to
protect your phone against unauthorised use. The
phone lock code (1 to 4 digits) is supplied with the
phone and is factory set to 0000.
To...
Refer to page...
Activate/deactivate
the Phone Lock feature
74 (menu option 7-3).
Change the phone lock code
74 (menu option 7-2).
22
Getting Started
PIN
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against unauthorised
use. It is usually supplied with the SIM card.
If you enter an incorrect PIN three times in succession,
the code is blocked and cannot be used until you
unblock it by entering the PUK (see below).
To...
Refer to page...
Activate/deactivate
the PIN Access feature
73 (menu option 7-1).
Change the PIN
74 (menu option 7-2).
PUK
The 8-digit PUK (Personal Unblocking Key) is required
to change a blocked PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it, contact
your service provider.
To change your PIN when the current PIN is blocked,
proceed as follows.
1. Key in the PUK and press the Ok soft key.
2. Enter a new PIN of your choice and press the Ok
soft key.
3. When the Repeat New PIN message is
displayed, key in the same code again and press
the Ok soft key.
If you enter an incorrect PUK ten times in succession,
the SIM card becomes invalid. Contact your service
provider for a new card.
23
Getting Started
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such as
setting the maximum cost of a call. These functions
are available if supported by your SIM card.
If you enter an incorrect PIN2 three times in
succession, the code is blocked and you cannot
access the functions until you unblock it by entering
the PUK2.
To change the PIN2, refer to page 74 (menu option 7-2).
PUK2
The 8-digit PUK2 (Personal Unblocking Key 2),
supplied with some SIM cards, is required to change
a blocked PIN2. If you lose the code, contact your
service provider.
To change your PIN2 when the current PIN2 is
blocked, proceed as follows.
1. Key in the PUK2 and press the Ok soft key.
2. Enter a new PIN2 of your choice and press Ok.
3. When the Repeat New PIN2 message is
displayed, key in the same code again and press
the Ok soft key.
If you enter an incor rect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
24
Getting Started
Password
The 4-digit network password is required when you
use the Call Barring function. You obtain the password
from your service provider when you subscribe to this
function. See page 78 for further details.
Using the Earphone
Note: The earphone may be an option in some
countries. If you wish to purchase one, contact
your local SAMSUNG dealer.
With the earphone, you can talk without using your
hands. When you connect the earphone to the
earphone jack on the left side of the phone, the
earphone operates in the same way as the phone’s
speaker and microphone.
The button on the earphone allows you to answer or
end a call without opening the flip cover or pressing
a button on the phone. If you receive a second call,
press the button to end the first call.
The Call Ended message is displayed for two
seconds.
Press the button again to answer the second call.
25
General Functions
Making a Call
When the idle screen is displayed, key in the area
code and phone number and press
.
International Calls
1. Press and hold down the * key.
The + character appears.
2. Key in the country code, area code and phone
number and press
.
Correcting the Number
To clear...
Then...
The last digit
displayed
Press the C key.
Any other digit
in the number
Press the soft key until the
cursor ( ) is immediately to the
right of the digit to be cleared.
Press the C key.
The whole display
Hold down the C key for more
than one second.
Ending a Call
When you have finished your call, briefly press the
key.
26
General Functions
Making a Call from the Phonebook
You can store the names and phone numbers that
you call regularly in the SIM card and phone memory,
known as the phonebook. You then simply select the
required name to recall the associated number. For
further details on the Phonebook feature, refer to
page35.
Emergency Calls
You can dial the emergency number even if:
• The handset is locked
• There is no SIM in the handset
• The handset cannot register with a network
(roaming)
To call the emergency services, enter 112 and then
press
or simply press the SOS soft key.
Note: If the phone is locked and you do not know the
phone lock code, simply press the SOS soft
key to call emergency services.
Last Number Redial
The phone stores the last 10 numbers dialled. To
recall any of these numbers, proceed as follows.
1. If there are any characters on the display, clear
the display by holding down the C key for more
than one second.
2. Press
to display the last number dialled.
27
General Functions
3. Use the
soft key (or the
and
keys on the
left side of the phone) to scroll through the
numbers until the required number is displayed.
4. To dial the number displayed, press
.
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone. Press
to increase and
to decrease the
volume.
28
General Functions
Answering a Call
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
nnnnn
((
Answer
))
Caller’s name
or number
Reject
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed. If the caller cannot be identified, the
phone icon flashes and No Number is displayed.
1. If necessary, open the flip cover.
Press
or the Answer soft key. If the Any
KeyAnswer menu option (5-4) is set to On (see
page 67), you can press any key to answer a call
except for
and the Reject soft key.
Note: To reject an incoming call, press the Reject
soft key or
.
2. End the call by closing the flip cover or pressing
.
Note: You can also answer a call while using the
phonebook or menu features.
29
General Functions
Viewing Missed Calls
If you are unable to answer a call for any reason, you
can find out who was calling you, if this service is
available. In this way, you can call the person back, if
necessary.
The number of missed calls is displayed on the idle
screen immediately after the call was missed.
1. If the flip cover is...
Then...
Closed
Open the flip cover.
Open
Press the List soft
key.
The number corresponding to the most recent
missed call is displayed, if available. You may
also use the
key on the left side of the phone
to view the list of the most recent missed call
numbers.
2. To...
Then press the...
Scroll through the
missed calls
soft key.
Call the number displayed
key.
Edit or delete a missed
Select soft key.
call number or view details
of the call
30
Selecting Functions
and Options
Your phone offers a set of functions that allow
you to customise your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys marked . Each menu and sub-menu
allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
Example:
Menu Phonebook
Press the left soft key
to enter the menu
facility.
Press the right soft
key to enter the
phonebook facility.
31
Selecting Functions and Options
To view the various functions/options available and
select the one required, proceed as follows.
1. Press the appropriate soft key.
2. To...
Then press the...
Select the:
• Function displayed
or
• Option displayed
in inverse video
Left soft key.
View the next function
or highlight the next
option in a list
Right soft key or the
key on the left
side of the phone.
Move back to the
previous function
or option in a list
key on the left
side of the phone.
Move back up one
level in the structure
C key.
Exit the structure
without changing
the settings
key.
In some functions, you may be asked for a password
or PIN. Enter the required code and press the Ok soft
key.
32
Selecting Functions and Options
Example: Setting the Text Language
1. When the idle screen is displayed, press the
Menu soft key to enter the menu facility.
<SERVICE PROVIDER>
10:30
Fri 14 May
Menu Phonebook
2. Scroll through the menus until you reach the
Phone Settings menu, by pressing the
soft
key (or the
or
keys on the left side of the
phone).
Phone
Settings
Select
5
3. To select the Phone Settings menu, press the
Select soft key.
Greeting
Message
Select
5.1
33
Selecting Functions and Options
4. Scroll through the sub-menus until you reach the
Language List sub-menu, by pressing the
soft key (or the
or keys on the left side of
the phone).
Language
List
Select
5.3
English
Current
language
5. To view the languages available, press the Select
soft key. The current language is displayed in
inverse video.
Current
language
English
Deutsch
Français
Select
5.3.1
6. Scroll through the list of languages until the
appropriate one is highlighted, by pressing the
soft key (or the
or keys on the left side of
the phone).
7. Press the Select soft key to confirm your
selection.
8. Press the C key twice or
menu structure.
34
once to exit the
Phonebook
You can store phone numbers and their corresponding
names in the memory of your SIM card. In addition,
you can store up to 10 numbers and names in the
phone memory. The SIM card and phone memories,
although physically separate, are used as if they were
a single entity, called the phonebook.
Storing a Phone Number with a Name
As soon as you start to enter a number, Save appears
above the left soft key to allow you to store the
number in the phonebook.
1. Key in the number to be stored.
2. When you are sure that it is correct, press the
Save soft key.
Notes:
• If you make a mistake while entering a number,
correct it using the C key. For further details,
refer to page 26.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
number key 1. ‘P’ is displayed to indicate the
pause.
3. Enter the corresponding name (the maximum
length depends on your SIM card). For information
on how to enter a name, see page 36.
4. When you are satisfied, press the Ok soft key.
35
Phonebook
5. Select the memory in which you wish to save the
number.
• Free SIM:
Stores the number in the first free
location in the SIM memory
• Free MEM: Stores the number in the first free
location in the phone memory
Note: If the selected memory is full, a warning
message is displayed asking you to select
the other memory.
6. When you are satisfied, press the Save soft key.
The phone now displays the first free location in
the memory that you selected.
7. If you do not want to save the number and name
in the suggested location, press the C key to clear
the location number and enter your preferred
location by pressing the number keys.
8. Press Ok to store the name and number.
Entering a Name
1. Press the key labelled with the required letter:
• Once for the first letter
• Twice for the second letter
• And so on
36
Phonebook
List of characters available:
Characters in the Order Displayed
Key
Upper Case
Lower Case
0
1
2
3
4
5
6
7
8
9
0
1 - . ,
A B C
D E F
G H I
J K L
M N O
P Q R
T U V
W X Y
#
*
# Γ ∆ Θ Λ Ξ Π Σ Φ Ψ Ω
∗ / ( ) < = > % £ $ ¥
@ & §
Space
0
: ; ‘ “ ? ¿ ! ¡ 1 - . , : ; ‘ “ ? ¿ ! ¡
2 Ä Å Æ Ç
a b c 2 à ä å æß
3 É
d e f 3 è é
4
g h i 4 ì
5
j k l 5
6 Ñ Ö Ø
mn o 6 ñ ò ö ø
S 7
p q r s 7
8 Ü
t u v 8 ù ü
Z 9
w x y z 9
Space
2. To switch between upper case and lower case
characters, press the Case soft key. All
subsequent letters will appear in the selected
case until the Case soft key is pressed again.
3. Select the other letters in the same way.
Note: The cursor moves to the right when you
press a different key. When entering the
same letter twice (or a different letter on
the same key), just wait for a few seconds
for the cursor to move right automatically,
and then select the next letter. You can also
move the cursor by using the or key.
To delete letters, press the C key.
37
Phonebook
Speed Dialling
You can speed dial a number stored in the SIM.
When the idle screen is displayed, press and hold
the number key (0-9) corresponding to the location in
which the required phone number is stored. To dial
the number stored in location 10, press number key 0.
Searching for and Dialling a Number in
the Phonebook
1. When the idle screen is displayed, press the
Phonebook soft key.
The names stored in the phonebook are listed in
alphabetical order.
You can also see the number of the selected entry
and the total number of entries in the phonebook.
2. To...
38
Then press the...
Scroll through
the phonebook
soft key (or the
or
key on the side of the phone)
until the required entry is
displayed in inverse video.
Look for a name
starting with a
different letter
Key labelled with the required
letter. Press the key once to
find a name beginning with
the first character printed on
the number key, twice for the
second character, and three
times for the third character.
Phonebook
3. Once you have found the required entry, press
to dial the number.
Phonebook Options
When storing or viewing the phonebook contents,
Option appears above the left soft key to allow you
to access the phonebook options.
To access the various phonebook options, proceed as
follows.
1. Press the Option soft key. The first available
option is displayed in inverse video.
2. To...
Then press the...
Select the
Select soft key.
highlighted option
Choose a
different option
soft key (or the
or
keys on the side of the phone)
until the required option is
displayed in inverse video.
The following options are available.
Search: allows you to search the phonebook for the
name you entered. Key in the first letter(s) of the
name. If the name shown is not the one required, use
the
key to scroll through the memory.
39
Phonebook
View: displays the name, number, memory type and
location number for the selected entry.
Samsung
SIM009
Ok
Stored name
5551212
Stored phone number
Memory type and location:
• SIM: 001-xxx, where xxx is the
maximum number of locations in
the SIM
• MEM (phone memory): 001-010
Edit: allows you to edit the number and name of the
selected entry stored in memor y.
Delete: allows you to erase the number and name of
the selected entry stored in memory.
Add: allows you to add a new number and name to
the memory.
Copy: allows you to copy a phonebook number to
another location. Use this option to store a number
similar to one already in memory; once copied, edit
the number and store it in the phonebook.
40
In-Call Options
Your phone provides a number of control functions
that you can use during a call. To access these
functions during a call, press the Option soft key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily, proceed as
follows.
1. Press the Option soft key.
2. Press the
soft key to select the Mute option.
3. Press the Select soft key.
Your correspondent can no longer hear you.
To switch the microphone back on, proceed as follows.
1. Press the Option soft key.
2. Press the
soft key to select the Unmute option.
41
In-Call Options
3. Press the Select soft key.
Your correspondent can hear you again.
Active
123456789012
02:15
Option
Searching for a Number in the
Phonebook
You can search for a number in the phonebook during
a call.
1. Press the Option soft key.
2. Press the
soft key (or the
or keys on the
left side of the phone) to display the Phonebook
option in inverse video.
3. Press the Select soft key.
The phonebook entries are listed.
When you press
, a second call is made.
For a more detailed description of the Phonebook
feature, refer to page 35.
42
In-Call Options
Putting a Call on Hold
You can place the cur rent call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
To place a call on hold, use the Hold option. You can
reactivate the call whenever you want, by pressing
the Unhold soft key.
To make a call while you have a call in progress,
proceed as follows.
1. Key in the phone number that you wish to dial or
look it up via the Phonebook option.
2. Press
to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the
Option soft key and select the Hold option.
2. Make the second call in the normal way.
To swap between the two calls, press the Swap
soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing the
key.
43
In-Call Options
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and if you have set the Call Waiting menu
option (8-3) to Activate (see page 79). You will be
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress,
proceed as follows.
1. Press
to answer the incoming call.
The first call is automatically put on hold.
2. If you want to switch between the two calls,
press the Swap soft key.
If you already have both an active and a held call and
you receive a third call, the following options are
available when you press
.
End Active: allows you to end the active call and
answer the incoming call.
End Held: allows you to end the call on hold and
answer the incoming call.
44
In-Call Options
Making a Multiparty Call
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
Setting Up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The
first call is automatically put on hold.
3. To join the first participant to the multiparty call,
press the Option soft key and select the Join All
option.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Option soft key and select the Join All option.
You can add incoming callers by answering the call
and pressing Option, followed by Join All. Repeat
as required.
Having a Private Conversation With One
Participant
1. Scroll through the participants by pressing the
soft key repeatedly until the appropriate
participant is displayed.
45
In-Call Options
Index of the active
call in thelist
Active
1/3
123456789012
02 :15
Option
Number of
participants
2. Press the Option soft key and choose the Private
option. Now you can talk privately with that
person. The other participants can continue to
converse with each other.
3. To return to the multiparty call, press the Option
soft key and select Join All.
All the multiparty call participants can now hear
each other.
The following options are also available.
Hold All: allows you to put the whole active call on
hold.
Transfer: allows you to connect two participants,
when one is on hold and the other is active; you are
then dropped from the call.
Note: To drop another participant, scroll through
t h ep a rticipants by pressing the
soft key
repeatedly until the appropriate one is
displayed and then press
.
46
In-Call Options
Rejecting a Waiting Call
If you have subscribed to the Call Waiting network
service and activated it (menu option 8-3; see
page 79), you can reject the waiting call and
continue with your current conversation. When the
second call is received, the phone rings and the
following screen is displayed.
Waiting
123456789012
Option
Reject
To reject the waiting call, press the Reject soft key
.
or
Muting/Sending Key Tones
This feature allows you to turn the key tones off for a
specific call. If you select the DTMF OFF option, your
phone does not transmit the key tones during the call.
The option is then automatically reset to On.
Note: To communicate with answering machines or
computerised telephony systems, the DTMFON
option must be selected.
Using the SMS Service
If you receive an SMS (Short Message Service) message during a call, the message icon ( ) appears.
After you have finished your call, you can read the
message: refer to page 58 for further details.
47
Using the Menus
A three-level menu structure is available to set the
various options available on your phone. You can
select the menu options in two different ways.
Using the Soft Keys
The two soft keys are used as follows.
Key
Left soft key
Right soft key
Purpose
Enters the menu structure.
Also selects the option displayed.
If the menu option selected has only
two possible values (On or Off), the
left soft key toggles between them.
Moves to the next option on the
same level as the one displayed.
You can also use the and keys on the left side
of the phone to move to the next or previous option
on the same level as the one displayed.
Example: Checking your home mailbox number.
1. Press the Menu soft key.
2. Select the Quick Access option and then Voice
Mail Setup, by pressing the Select soft key.
Your home mailbox number is displayed. For a more
detailed description of the Voice Mail feature, refer
to page 54.
48
Using the Menus
Using the Index System
Each menu option is assigned a hierarchical number.
You can use this number to access the corresponding
option directly. Simply press the Menu soft key and
key in the required number.
Example: Checking your home mailbox number.
1. Press the Menu soft key.
2. Enter 1 2.
3. Press the Select soft key.
Your home mailbox number is displayed.
The numbers assigned to each option are indicated
on the following menu map.
49
Using the Menus
Menu Map
The following illustration shows the menu structure
available and indicates the:
• Number assigned to each option
• Page on which you can find a description of each
feature
1. Quick Access
1-1 Connect to Voice Mail
1-2 Voice Mail Setup
1-3 Service Directory
2. Call Records
2-1
2-2
2-3
2-4
Last Dialled Calls
Last Received Calls
Last Missed Calls
Delete Recent Calls
2-4-1 Dialled Calls
2-4-2 Received Calls
2-4-3 Missed Calls
2-4-4 All Calls
2-5 Call Cost and Duration
2-5-1 Last Call
2-5-2 All Calls
2-5-3 Maximum Cost
2-5-4 Price and Unit
50
Page 54
Page 55
Using the Menus
3. Short Messages
3-1 Read All Messages
3-2 Create Message
3-3 Message Setup
3-3-1 Message Protocol
3-3-2 Message Centre
3-3-3 Reply Path
3-3-4 Validity Period
3-4 Broadcast
3-4-1 Read All Messages
3-4-2 Receive
3-4-3 Subject List
3-4-4 Language List
4. Sound Settings
4-1
4-2
4-3
4-4
4-5
4-6
4-7
4-8
Ring Type
Ring Volume
Alert Type
Keytone Type
Keytone Volume
Message Alert
Warning Tone
Minute Tone
5. Phone Settings
5-1
5-2
5-3
5-4
5-5
5-6
5-7
5-8
5-9
Greeting Message
Own Number
Language List
Any Key Answer
Backlight Time
Auto Redial
Auto Answer
Caller Number
Factory Reset
Page 58
Page 62
Page 65
51
Using the Menus
6. Clock Settings
6-1 Alarms
6-2 Time Setup
6-2-1 Set Time
6-2-2 World Time
7. Security Settings
7-1 PIN Access
7-2 Change Codes
7-2-1 PIN Code
7-2-2 PIN2 Code
7-2-3 Password
7-2-4 Lock Code
7-3 Phone Lock
7-4 Phonebook Lock
7-5 Fixed Dialling Number
7-5-1 FDN List
7-5-2 FDN Mode
52
Page 70
Page 73
Using the Menus
8. Network Services
Page 76
8-1 Call Divert
8-1-1 Divert All Calls
8-1-2 Divert when Busy
8-1-3 Divert when Not Answered
8-1-4 Divert when Not Found
8-1-5 Cancel All Diverts
8-2 Call Barring
8-2-1 No Outgoing Calls
8-2-2 No Foreign Calls
8-2-3 Only Local and Home Countr y
8-2-4 No Incoming Calls
8-2-5 No Incoming if Abroad
8-2-6 Cancel All Barrings
8-3 Call Waiting
8-4 Caller Identity
8-5 Closed User Group
8-5-1 CUG Select
8-5-2 User Define CUG
9. Network Selection
9-1 Selection
9-2 Perferred List
9-3 User Define List
Page 82
53
Quick Access
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
Note: Voice Mail is a network feature. Please contact
your service provider for more information.
Connect to Voice Mail
Menu 1-1
This option dials your voice mailbox.
Use the Voice Mail Setup menu option (1-2) to
store your voice mailbox number.
Voice Mail Setup
Menu 1-2
You must declare the mailbox numbers to be dialled
when you wish to connect to your Voice Mail (menu
option 1-1) and listen to your messages. Two mailbox
numbers can be stored:
• Mailbox number to be dialled when you are on your
home network
• Mailbox number to be dialled when you are
roaming on other networks
Service Directory
Menu 1-3
If your SIM contains Service Dialling Numbers (SDN),
this menu enables you to view the Service Directory
and make calls from it.
54
Call Records
Last Dialled Calls
Menu 2-1
This option lets you view the last calls dialled.
You can also:
• Edit a number and save it in the phonebook
• Redial a number
The number of calls is dependent on your SIMcard.
To view details of a call in the list, scroll down to the
required call and press the Select soft key.
Last Received Calls
Menu 2-2
This option lets you view the last 10 phone calls
received. You can also:
• Edit a number if available and dial it or save it in
the phonebook
• Dial a number
To view details of a call in the list, scroll down to the
required call and press the Select soft key.
When the idle screen is displayed and the flip cover
is open, you can also access the list of the last calls
received by pressing the
key on the left side of
the phone.
55
Call Records
Last Missed Calls
Menu 2-3
This option lets you view the last 10 unanswered
calls. You can also:
• Edit a number if available and dial it or save it in
the phonebook
• Dial a number
To view details of a call in the list, scroll down to the
required call and press the Select soft key.
When the idle screen is displayed and the flip cover
is open, you can also access the last missed calls by
pressing the key on the left side of the phone.
Delete Recent Calls
Menu 2-4
This feature lets you erase the most recent calls.
The following options are available:
• Dialled Calls
• Received Calls
• Missed Calls
• All Calls
Select the required option and press the Yes soft key
to confirm the deletion or No to cancel your action.
56
Call Records
Call Cost and Duration
Menu 2-5
This network feature lets you view the cost of calls.
The following options are available.
Last Call: allows you to check or reset the cost and
duration of the last call made.
All Calls: allows you to check or reset the cost and
duration of all calls made. If you select the Reset
option, you must enter your PIN2.
Maximum Cost: allows you to check or change the
maximum limit for the cost of calls. If you select the
Change option, you must enter your PIN2.
Price and Unit: allows you to set the cost of one
unit; this price per unit is applied when calculating
the cost of your calls. If you select the Change
option, you must enter your PIN2.
Note: Not all SIM cards support the call cost feature.
The number of items in these lists depends on
the capacity of your SIM card.
57
Short Messages
The SMS (Short Message Service) feature is a
network service and may not be supported by your
network. Messages can be sent by fax, Internet,
Paging, ERMES or X.400 messaging systems, provided
that these services are supported by your network. To
send short messages by phone, you must obtain the
number of the SMS centre from your service provider.
When the
icon appears, you have received new
short messages. If the message memory is full, an
error message is displayed and you cannot receive
any new messages. Use the Delete option in the
Read All Messages menu (3-1) to delete obsolete
messages.
Read All Messages
Menu 3-1
When the Read All Messages option is selected,
the header of the first message is displayed:
• Message number
• Message status (New, Received, Saved, Sent)
To view this message, press the View soft key. The
screen shows the:
• Message text
• Sender’s phone number (if sent with the message)
• Date and time at which the message was received
To scroll through the messages, press the
soft key
or the or
keys on the left side of the phone.
58
Short Messages
You can choose the following options, by pressing
the Option soft key.
Delete: allows you to erase the selected message.
Reply: allows you to send a reply to the sender.
Voice Call: allows you to call the sender back.
Edit: allows you to edit the message and
destination. You can save, send, or save and send
the edited message to the destination.
Extract: allows you to extract a number from the
message text, so that you can call the number or
save it in the phonebook.
Note: The options available vary, depending on the
message status (New, Received, Saved, Sent).
Create Message
Menu 3-2
Via this menu, you can write short messages of up to
160 alphanumeric characters.
Note: For further information on how to enter the
characters in your message, refer to page 36.
After you complete the message, you are asked to
enter the destination. You can select a number
stored in the phonebook.
59
Short Messages
When you have finished, the following options are
available.
Send: allows you to send the message to the
destination.
Save: allows you to save the message so that it can
be sent later. When you read the message, Saved is
displayed to indicate its state.
Save and Send: allows you to save a copy of the
message and then send the message to the required
destination. You can read the message using the
Read All Messages option (3-1). Sent is displayed
when you read the message to indicate its state.
Message Setup
Menu 3-3
Via this menu, you can set up default information for
the SMS feature.
Message Protocol: allows you to set the default
message type (Text, Fax, Voice Mail, ERMES, Paging,
X.400 and Internet). The network converts the
message into the selected format.
Message Centre: allows you to store or change the
number of your SMS centre required when sending
text messages. You must obtain this number from
your service provider.
Reply Path: allows you to switch on when a
message is sent; the person to whom you sent the
message can then reply and the cost of the reply is
charged to your telephone bill.
60
Short Messages
Validity Period: allows you to set the default time
period for which your messages are stored in the
SMS centre while attempts are made to deliver them.
Possible values are one hour, two hours, six hours, one
day, two days, one week, four weeks and six months.
Broadcast
Menu 3-4
This network service allows you to receive short
messages on various topics, such as the weather or
traffic. Please contact your service provider for more
information.
The following options are available.
Read All Messages : lets you read all cell broadcast
messages. Scroll through the message using the
soft key. At the end of the message, press the Next
soft key to move to the next message.
Receive: allows you to enable or disable the
reception of broadcast messages.
Subject List: allows you to select two sub-options.
The Active List sub-option displays the current active
list. You can add an entry or delete the selected
entry from the list. The number of entries in the list
depends on your SIM. The User Define List suboption allows you to define up to five entries.
Language List: allows you to select your preferred
language when displaying cell broadcast messages.
The number of languages available depends on your
SIM.
61
Sound Settings
You can use the Sound Settings feature to customise
various settings, such as the:
• Ringing tone, volume and type
• Sounds made when you press a key, make an
error or receive a message
Note: To switch to the silence mode, hold down the
key with the flip cover closed. The phone
displays Silence.
The phone vibrates instead of beeping when
you press a key or are to be informed of an
event.
Ring Type
Menu 4-1
This option allows you to select the required ringing
melody. You can choose between fifteen melodies.
Ring Volume
Menu 4-2
This option allows you to adjust the ringing volume
to one of eight levels. Use the and
keys on the
left side of the phone. The greater the number of
bars, the greater the volume.
Alert Type
Menu 4-3
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.
Melody: the phone rings using the ringing melody
selected via menu option 4-1.
62
Sound Settings
Vibration: the phone vibrates but does not ring.
Vib+Melody: the phone both rings and vibrates.
Light: only the backlight is switched on; the phone
neither rings nor vibrates.
Keytone Type
Menu 4-4
This option allows you to select the tone that the
keypad generates when you press a key.
The following options are available.
Off: the keys do not make any sound.
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
Keytone Volume
Menu 4-5
This option allows you to adjust the key volume to
one of eight levels. Use the and keys on the
left side of the phone.
Message Alert
Menu 4-6
This option allows you to select how the phone
informs you that a new message has been received.
The following options are available.
Single: the phone beeps once.
Periodic: the phone beeps at regular intervals.
Light: the light on the top of the phone flashes.
63
Sound Settings
Warning Tone
Menu 4-7
This option allows you to select how the phone
informs you that you have made a mistake. The
current status is displayed in the lower right corner.
On: the phone beeps differently from normal when
you make a mistake.
Off: the phone beeps normally even when you make
a mistake.
Minute Tone
Menu 4-8
This option allows you to specify whether the phone
must beep every minute during an outgoing call to
keep you informed of the length of your call.
On: the phone beeps every minute.
Off: the phone does not beep.
64
Phone Settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Phone Settings menu.
Greeting Message
Menu 5-1
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
The current message is displayed.
To...
Then press the...
Clear the existing message
C key and hold it
down until the message
is cleared.
Enter a new message
Appropriate
alphanumeric keys.
Change from upper case
to lower case characters
and vice versa
Case soft key.
Move the cursor left without
clearing the digits
key on the left side
of the phone.
Move the cursor right
key on the left side
of the phone.
For more information on entering characters, refer to
page 36.
65
Phone Settings
Own Number
Menu 5-2
This menu displays your phone number and allows
you to edit it.
To...
Then press the...
Enter the international
prefix (+)
* key and hold it
down until the + is
displayed.
Correct a digit
C key.
Clear the whole number
C key and hold it
down until the
number is cleared.
Move the cursor left without
clearing the digits
key on the left
side of the phone.
Move the cursor right
key on the left
side of the phone.
Save the number displayed
Save soft key.
Language List
You can select a display language.
66
Menu 5-3
Phone Settings
Any Key Answer
Menu 5-4
Depending on the setting of the Any Key Answer
option, you can answer an incoming call by pressing
any key except
and the Reject soft key.
To reject the call, press
or the Reject soft key.
On: you can press any key except
and the
Reject soft key to answer the incoming call.
Off: you can only press
or the Answer soft key
to answer the incoming call.
Use the Select soft key to change the status.
Backlight Time
Menu 5-5
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off. The
following options are available.
Off: the backlight is not used.
Short: the backlight comes on when you press a key
or receive a call and switches off 10seconds after
the last key is pressed.
Long: the backlight comes on when you press a key
or receive a call and switches off 20seconds after
the last key is pressed.
67
Phone Settings
Auto Redial
Menu 5-6
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
To answer an incoming call, press any key or
close the flip cover. Automatic redialling is
stopped.
The following options are available.
On: the number is redialled automatically.
Off: the number is not redialled.
Auto Answer
Menu 5-7
This menu is used for a hands-free kit only. It allows
you to answer incoming calls automatically.
On: an incoming call is answered after about three
seconds.
Off: an incoming call is not answered automatically.
68
Phone Settings
Caller Number
Menu 5-8
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to
change this setting.
The following options are available.
Default: the default setting provided by the network
is used.
Hide Number: your number is not displayed on the
other person’s phone.
Send Number: your number is sent each time you
make a call.
Factory Reset
Menu 5-9
You can reset some of the menu settings to their
original values. The phone lock code is required for
this function.
Note: The phone lock code is preset to 0000; refer to
page 74 for further details.
69
Clock Settings
The Clock Settings feature enables you to:
• Set the current date and time
• Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for example)
• Find out what time it is in various cities around
the world
Alarms
Menu 6-1
This option allows you to set a maximum of four
alarms to ring at specific times. If at least one alarm
is set, the alarm icon is displayed when the flip cover
is closed.
Alarm List
This menu displays the list of alarms already set. To
set an alarm, proceed as follows.
1. Press the Option soft key. The following options
are available.
Add: allows you to set a new alarm.
Edit: allows you to view and edit an alarm
already set.
Delete: allows you to delete the selected alarm.
Note: The Edit and Delete options are only
available when you have set at least one
alarm.
70
Clock Settings
2. Choose the alarm frequency option.
Daily Alarm: the alarm rings every day at the
same time.
Once Alarm: the alarm rings only once and is
then deactivated.
Weekly Alarm: the alarm rings every week on
the same day and at the same time.
3. Enter the required time.
4. Enter a message to remind you of why you set the
alarm.
5. Press the Ok soft key.
The Alarm Activated message and alarm icon
are displayed when the flip cover is closed.
To stop the alarm when it rings, simply open the flip
cover.
Clear All
This menu clears all the alarms that you have set.
Time Setup
Menu 6-2
Set Time
This option allows you to change the current time
and date.
71
Clock Settings
World Time
You can use your phone to check the current time in
21 major cities around the world. Scroll through the
cities using the
soft key.
The screen shows the:
• City name
• Current date and time
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default).
To select the time zone in which you are located,
proceed as follows.
1. Select the city corresponding to your time zone by
pressing the
soft key one or more times.
The local date and time are displayed.
2. Press the Option soft key.
3. To...
72
Then press the...
Update the current
date/time with this
new setting
Set Local soft key.
Indicate that the
time zone is currently
using the daylight
saving time
Set DST soft key.
A bullet (•) is shown
next to the time
difference.
Indicate that the
time zone is no longer
using the daylight
saving time
Remove DST soft key
(only available when a
bullet (•) is shown next
to the time difference).
Security Settings
To access this menu, you must first enter the phone
lock code. The Security Settings feature enables you
to restrict the use of your phone to:
• The people of your choice
• The types of calls of your choice
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (see also pages 22-25).
PIN Access
Menu 7-1
When the PIN Access feature is enabled, you must
enter your PIN each time you switch the phone on.
Any person who does not have your PIN cannot,
therefore, use your phone without your approval.
Note: Before disabling the PIN Access feature, you
must enter your PIN.
If this option is enabled on your SIM card and
the service provider does not allow it to be
changed, the option is not displayed.
To change your PIN, refer to menu option 7-2 on the
following page.
73
Security Settings
Change Codes
Menu 7-2
This feature allows you to change the various codes
(PINs, lock code and network password) used by the
phone. You must enter the current code before you
can specify a new one.
Once you have entered a new code, you are asked to
confirm it by entering it again.
PIN Code: when the PIN Access feature is enabled,
allows you to change your current PIN to a new one.
PIN2 Code: allows you to change your current PIN2
to a new one.
Password: allows you to change your current
network password to a new one. This password is
used to activate network call barring and is obtained
from your service provider. It is not the same as the
PIN for your SIM card.
Lock Code: allows you to change your current
phone lock code to a new one. This code is factory
set to 0000.
Phone Lock
Menu 7-3
When the Phone Lock feature is enabled, the phone
is locked and you must enter a 4-digit phone lock
code each time the phone is switched on.
74
Security Settings
The lock code is factory set to 0000. To change the
phone lock code, refer to menu option 7-2. Once the
correct lock code has been entered, you can use the
phone until you switch it off.
Phonebook Lock
Menu 7-4
When the Phonebook Lock feature is enabled, you
must enter the 4-digit phone lock code each time you
access the phonebook to dial numbers or store
numbers in it.
Fixed Dialling Number
Menu 7-5
This feature allows you to restrict your outgoing calls
to a limited set of phone numbers.
Note: If your SIM card does not support this feature,
the menu option is not displayed.
FDN List: shows the fixed dialling number list.
The options available depend on whether the FDN
mode is enabled or disabled.
To call a number in the list, press the
key twice.
If the FDN mode is disabled, you cannot call the
number and the message Check FDN Mode is
displayed for two seconds.
FDN Mode: enables or disables the FDN mode.
To change the FDN mode, you must enter your PIN2.
75
Network Services
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
Call Divert
Menu 8-1
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
Call diverting can be set up in the following ways.
Divert All Calls: all calls are diverted.
Divert when Busy: calls are diverted if you are
already making another call.
Divert when Not Answered: calls are diverted if
you do not answer the phone; you can change the
unanswered delay time.
Note: a network may impose a constant delay time.
Divert when Not Found: calls are diverted if you
are not in an area covered by your service provider.
Cancel All Diverts: all call diverting options are
cancelled.
You can specify individual diverting options for each
of the following services:
• Voice service
• Asynchronous data service
• Fax service
76
Network Services
Example: You can:
• Systematically divert fax calls to your
office fax machine
• Divert voice calls to your colleague if
you are already using the phone
To set your call diverting options, proceed as follows.
1. Select the type of call diverting required by
pressing the
soft key until the appropriate
option is displayed, and then press Select.
2. Select the service to be diverted by pressing the
soft key until the appropriate service is
displayed and then press Select.
3. Select one of the following options.
Activate: activates the call diverting mode
selected.
Cancel: cancels the call diverting mode selected.
Status: displays the current status.
4. Enter the number to which the service is to be
diverted and press Ok.
To enter the international code, press * until the
+ sign is displayed.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
77
Network Services
Call Barring
Menu 8-2
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways.
No Outgoing Calls: calls cannot be made.
No Foreign Calls: international calls cannot be
made.
Only Local and Home Country: when abroad, calls
can be made only to numbers within the current
country and to your home country, that is the countr y
where your home network provider is located.
No Incoming Calls: calls cannot be received.
No Incoming if Abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel All Barrings: all call barring settings are
deactivated; calls can be made and received normally.
You can specify individual barring options for each of
the following services:
• Voice service
• Asynchronous data service
• Fax service
To set your call barring options, proceed as follows.
1. Select the type of call barring required by
pressing the
soft key until the appropriate
option is displayed and then press Select.
78
Network Services
2. Select the service to be barred by pressing the
soft key until the appropriate service is displayed
and then press Select.
3. Select one of the following options.
Activate: activates the call barring mode
selected.
Cancel: cancels the call barring mode selected.
Status: displays the current status.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To use the Activate and Cancel options, you
must enter your network password.
Call Waiting
Menu 8-3
This network service enables you to be informed
when someone is trying to reach you during another
call. This feature is not available for fax and data
services.
The following options are available.
Activate: activates the call waiting feature.
Cancel: cancels the call waiting feature.
Status: displays the current status.
79
Network Services
Caller Identity
Menu 8-4
This menu option lets you view the following line
identification settings.
Presentation Your ID:
Your phone number is displayed on the called
person’s phone when you make a call.
Restriction Your ID:
Your phone number does not appear on the called
person’s phone when you make a call.
Presentation Caller ID:
The caller’s phone number is displayed on your phone
when you receive a call.
Restriction Caller ID:
The caller’s phone number is not displayed on your
phone when you receive a call.
80
Network Services
Closed User Group (CUG)
Menu 8-5
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of any of 10 user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Example: A company lends SIM cards to its employees
and wants to restrict outgoing calls to
members of the same team.
CUG Select: allows you to select a group. The
Default option allows you to select a user group on
which you have agreed with the service provider. If
you select the Not CUG option, the CUG feature is
deactivated.
User Define CUG: The list of current CUGs is
displayed. The Add, Edit, Delete and Delete All
options are available.
If the CUGlist has 10 items, the Add option is not
available. If the CUG list is empty, the Edit, Delete
and Delete All options are not available. You can
select this CUGlist via the CUG Select option.
Note: You may communicate a default CUG to your
service provider. If you have done so, you can
enable the Default option on your phone.
When making a call, you will be given the
option of using your default CUG, instead of
selecting one from the list.
81
Network Selection
The Network Selection feature enables you to:
• Indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually
• Set up a preferred list to be used when selecting a
network automatically
Note: You can select a network other than your home
network only if it has a valid roaming
agreement with your home network.
Selection
Menu 9-1
To indicate whether the network is to be selected
automatically or manually when roaming, proceed
as follows.
1. When Selection is displayed, press the Select
soft key.
2. Press the
soft key until the appropriate option
is highlighted and press the Select soft key.
If you select Automatic, you are connected to the
first network in the preferred list that is available
when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press the
soft key until the preferred network
is highlighted and press Ok.
You are connected to that network when roaming.
82
Network Selection
Preferred List
Menu 9-2
This menu allows you to list your preferred networks
to be used when roaming. Your phone uses the
networks in order of appearance in this list, provided
that the network is available. The list can contain up
to eight networks.
When you select this option, the current preferred
list is displayed if it already exists (see the procedure
below).
1. To scroll through the list, press the
until you find the required network.
soft key
2. Press the Option soft key. The following options
are available.
Append: allows you to append a new network to
the end of the preferred list.
Delete: allows you to delete the selected network
from the preferred list.
3. Repeat the above steps as required.
83
Network Selection
User Define List
Menu 9-3
With this menu, you can include up to five new
networks, the codes of which are not known to the
phone.
1. To scroll through the list, press the
until you find the required network.
soft key
2. Press the Option soft key. The following options
are available.
Add: allows you to add a new network to the
user define list. Please contact your service
provider for more details.
Edit: allows you to edit each entry in the list by
declaring the country code, network code and
name.
Delete: allows you to delete the selected network
from the user define list.
3. Repeat the above steps as required.
84
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
When you switch your phone on, the following
messages appear
Insert SIM
• Check that the SIM card is correctly installed.
Phone Locked
• The automatic locking function has been enabled.
You must enter the phone’s lock code before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The option requiring that the PIN be entered each
time the phone is switched on was enabled. You
must enter your PIN and then disable this option if
so required.
Enter PUK
• The PIN code was entered wrongly three times in
succession and the phone is now blocked. Enter
the PUK supplied by your network operator.
85
Solving Problems
“No Service” is displayed
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription. Contact the
service provider for further details.
The phone does not beep when you press a key
• Have you set the key tone feature to off?
• Have you activated the silence mode?
To deactivate the silence mode, hold down the
key on the left side of the phone.
You are not alerted audibly when you receive a
call or a short message
• Have you activated the silence mode?
To deactivate the silence mode, hold down the
key on the left side of the phone.
You have entered a number but it was not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (
pressed for
more than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
86
Solving Problems
Your correspondent cannot hear you speaking
• Have you switched off the microphone with the
Mute option?
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
centre of the phone.
The phone starts beeping and “Low Battery” is
displayed
• The battery is insufficiently charged. Replace the
battery and recharge it.
The audio quality of the call is poor
• Check the signal strength indicator in the display
( ); the number of bars after it indicates the
signal strength from strong ( ) to weak ( ).
• Try increasing the signal strength by moving the
phone slightly or moving closer to a window if you
are in a building.
No number is dialled when you recall a phonebook
entry
• Check that the numbers have been stored
correctly.
• Re-store them, if necessary.
If the above guidelines do not enable you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG
after-sales service.
87
Using the Batteries
Your phone is powered by a rechargeable Li-lon
1000 mAh standard battery.
The following batteries are also available (ask your
SAMSUNG dealer for further details):
– BTL631S slim battery (600 mAh)
– BTL1030M standard battery (1000 mAh)
– BTL1630L long-life battery (1600 mAh)
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
88
Using the Batteries
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-lon batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and - terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
89
Safety Information
Road Safety
• Remember, road safety always comes first!
• Do not use a hand-held phone while driving a
vehicle. Always park the vehicle before having a
conversation.
• Make sure that the phone is stored safely and will
not fall or be broken in the event of a collision or
emergency stop.
• The use of an alert device to operate a vehicle’s
lights or horn on public roads is not permitted.
• Only qualified personnel should install or service
the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the unit.
• Electronic fuel injection, anti-skid braking,
electronic cruise control or any other electronic
systems may malfunction due to the lack of
protection from radio signals. Check regularly that
all cellular phone equipment in your vehicle is
mounted and operating correctly.
Operating Environment
• Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or when
it may cause interference or danger (in a hospital
for example).
90
Safety Information
• Operation of any radio transmitting equipment,
including cellular phones, may interfere with
inadequately protected medical devices. Consult
a physician or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
• As with other mobile radio transmitting equipment,
you are advised that for satisfactory operations
and personal safety, the equipment should only be
used in the normal operating position.
• Always switch off the phone when at a refuelling
point (service station). You are reminded of the
need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• Switch off your cellular phone when in an aircraft.
The use of cellular phones in an aircraft is illegal
and may be dangerous to the operation of the
aircraft or disrupt the cellular network. Failure to
observe these instructions may lead to the
suspension or denial of cellular telephone
services to the offender, legal action or both.
91
Safety Information
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill the warranty
obligations and enjoy this product for many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Rain, humidity and liquids
containing minerals will corrode the electronic
circuits.
• Do not use or store the phone in dusty, dirty areas
as its components may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up (to its normal temperature),
moisture can form inside the phone, which may
damage the electronic circuits.
• Do not attempt to open the phone. Non-expert
handling of the phone may damage it.
• Do not drop or knock the phone. Rough handling
may damage the internal circuits.
92
Safety Information
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in mild, soapy water.
• If the phone or any of its accessories are not
working properly, take them to your nearest
qualified service centre. The personnel there will
assist you, and if necessary, arrange for the phone
to be repaired.
Emergency Calls
Important! This phone, like any cellular phone, uses
radio signals, cellular and landline
networks, as well as user-programmed
functions that cannot guarantee
connection in all conditions. Therefore,
you should never rely solely on any
cellular phone for essential communications (medical emergencies for example).
Remember, to make or receive any calls, the phone
must be switched on and in a service area with
adequate cellular signal strength.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use. Check with local
cellular service providers.
93
Glossary of Terms
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here
are a few definitions.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another mobile or fixed line.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
94
Glossary of Terms
Inverse Video
Display mode in which the characters are displayed
in a light colour on a dark background to indicate that
the item is currently selected.
Line Identification Services
Service allowing subscribers to view or block the
telephone numbers of callers.
Lock Code
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
Multi-party Calling
Ability to establish a conference call involving up to
five additional parties.
PIN (Personal Identification Number)
Security code that protects the phone against
unauthorised use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eightdigit number and can be changed, as required.
95
Glossary of Terms
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and memory
information, as well as the subscriber’s personal
data). The SIM card fits into a small slot on the back
of the phone and is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be displayed,
received, edited or sent.
96
Glossary of Terms
Soft Keys
Keys marked ... on the phone, the purpose of which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available, plays
a greeting (optionally in your own voice) and records
a message.
97
Index
A
C (continued)
Access codes • 22
Accessories • 9
Adding phonebook numbers • 40
Alarms (6-1) • 70
Alert
Message (4-6) • 63
Type (4-3) • 62
Answering
a second call • 44
any key (5-4) • 67
calls • 29
Any Key Answer (5-4) • 67
Auto
Answer (5-7) • 68
Redial (5-6) • 68
Calls (continued)
holding • 43
international • 26
making • 15; 26
missed • 30; 56
multiparty • 45
received (2-2) • 55
records (2) • 55
speed dialling • 38
via the phonebook • 27; 38
waiting (8-3) • 47; 79
Care • 92
Changing
lock code (7-2) • 74
passwords (7-2) • 74
phonebook numbers • 40
PIN (7-2) • 74
PIN2 (7-2) • 74
Characters
changing case • 37
entering • 36
Charging batteries • 19
Clock Settings (6) • 70
Closed User Group (8-5) • 81
Codes
changing (7-2) • 74
Conference calls
• See Multiparty calls
Connect
to Voice Mail (1-1) • 54
Copying phonebook
numbers • 40
Cost of calls • 57
CUG • 81
B
Backlight • 14; 67
Barring
calls (8-2) • 78
network password • 25
Batteries
charging • 19
low battery indicator • 20
precautions • 88
Broadcast (3-4) • 61
Browsing the menu map • 31
C
Caller
identity (8-4) • 80
number (5-8) • 69
Calls
answering • 29; 67
a second call • 44
barring • 78
cost (2-5) • 57
deleting recent
calls (2-4) • 56
dialled (2-1) • 55
diverting (8-1) • 76
duration (2-5) • 57
during a call • 41
emergency • 8; 27; 93
ending • 26
98
D
Date setting • 71
Deleting
phonebook numbers • 40
recent calls (2-4) • 56
Dialled calls
last (2-1) • 55
Dialling • 26
speed • 38
Index
D (continued)
Display • 12
icons • 13
setting the language • 33
Diverting calls (8-1) • 76
DTMF dialling • 47
Duration of calls • 57
E
Earphone • 25
Earpiece
adjusting the volume • 28
Emergency calls • 8; 27; 93
F
FDN • 75
Fixed Dial Number (7-5) • 75
Functions
selecting • 31
G
Greeting Message (5-1) • 65
H
Holding calls • 43
I
Icons
description • 13
short message • 47; 58
Identifying a caller • 80
K
Key tones
adjusting the volume • 63
muting • 47
selecting • 63
sending • 47
Keys
location • 10
purpose • 10-11
Keytone
Type (4-4) • 63
Volume (4-5) • 63
L
Language
List (5-3) • 66
setting the text • 33
Last
calls
dialled • 55
missed • 56
received • 55
number redialling • 27
Length of calls • 57
Letters
changing case • 37
entering • 36
Light
back • 14
service • 14
Line identification • 80
Locking
code • 22; 74
phone (7-3) • 74
phonebook (7-4) • 75
Low battery indicator • 20
M
Maintenance • 92
Menu map • 50
browsing • 31
numbers • 49
Messages
alert (4-6) • 63
broadcast (3-4) • 61
creating (3-2) • 59
greeting (5-1) • 65
reading (3-1) • 58
setup (3-3) • 60
writing • 59
Microphone mute • 41
Minute Tone (4-8) • 64
Missed calls
deleting (2-4) • 56
last (2-3) • 56
viewing • 30
Multiparty calls
dropping one person • 46
making • 45
private conversation • 45
99
Index
M (continued)
Mute
key tones • 47
microphone • 41
N
Names
changing case • 37
entering • 36
searching/dialling • 38
storing in the
phonebook • 35
Network
password • 25; 74
Preferred List (9-2) • 83
Selection (9-1) • 82
Services (8) • 76
User Define List (9-3) • 84
Numbers
correcting • 26
own (5-2) • 66
redialling last • 27
searching/dialling • 38; 42
storing in the
phonebook •35
P (continued)
Phonebook • 35
adding numbers • 40
copying numbers • 40
deleting numbers • 40
dialling • 38
editing numbers • 40
lock (7-4) • 75
making calls • 26
options • 39
searching • 38; 42
storing numbers/names • 35
PIN • 23
access (7-1) • 73
changing (7-2) • 74
checking • 73
PIN2 • 24
changing (7-2) • 74
Preferred network list • 83
Problem solving • 85
PUK • 23
PUK2 • 24
Q
Quick Access (1) • 54
O
R
Options
during a call • 41
phonebook • 39
selecting • 31
Own Number (5-2) • 66
Received calls
deleting (2-4) • 56
last (2-2) • 55
Records
call (2) • 55
Redialling
automatic • 68
last number• 27
Rejecting waiting calls • 47
Reset • 69
Ring
Type (4-1) • 62
Volume (4-2) • 62
Roaming • 96
P
Password
changing (7-2) • 74
network • 25
Personal Identification Number
• See PIN
Personal Unblocking Key • 23
Phone
Lock (7-3) • 74
lock code • 22; 74
Settings (5) • 65
100
Index
S
T (continued)
Safety
batteries • 88
information • 90
precautions • 7
Security Settings (7) • 73
Selecting functions/options • 31
Sending key tones • 47
Service Directory (1-3) • 54
Service light • 14
Setting
alarms (6-1) • 70
text language • 33
time (6-2) • 71
voice mail number • 54
Short messages • 58
broadcasting (3-4) • 61
creating (3-2) • 59
icon • 58
reading (3-1) • 58
setup (3-3) • 60
writing • 59
SIM card
installing • 16
precautions • 16
SMS • 47
setup (3-3) • 60
short message icon • 47; 58
Soft keys • 48
Solving problems • 85
SOS • 27
Sound Settings (4) • 62
Speed dialling • 38
Switching on/off • 21
Tone
keypad (4-4) • 63
message (4-6) • 63
minute (4-8) • 64
ring (4-1) • 62
warning (4-7) • 64
Transferring calls • 46
Travel adapter • 19
U
User
Define List (9-3) • 84
groups • 81
V
Viewing missed calls • 30
Voice mail
connecting to (1-1) • 54
mailbox types • 54
number • 54
setup (1-2) • 54
Volume
adjusting • 28
selecting
keytone (4-5) • 63
ring (4-2) • 62
W
Waiting calls • 79
rejecting • 47
Warning Tone (4-7) • 64
World time • 72
T
Text language
selecting • 33
Time
backlight • 14; 67
setting (6-2) • 71
world • 72
101