Sharp DV-HR350S Operating instructions

Before you start
Connections
VCR/DVD RECORDER
COMBINATION
Getting started
DV-RW340U
DV-RW350U
OPERATION MANUAL
Recording
Please read this Operation Manual carefully before using
your VCR/DVD RECORDER COMBINATION.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
Playing discs
The region number for
this unit is 1.
Editing
1
Changing the SETUP menu
• Remote control
(9HSNB114UD)
with two “AA” size
batteries
• Round Coaxial cable • Audio/Video cables
• Operation Manual
(9HSWPZ0901TM003) (9HSWX1E56B5-001) (9HS1VMN20224)
• QUICK USE GUIDE
(9HS1VMN20237)
VCR functions
Supplied Accessory
Operation Manual
Others Español
Before you start
Precautions
For future reference, record the model and serial numbers (located on
the rear of the Unit) in the space provided.
Model No.:
Serial No.:
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITAR LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol warns the user of uninsulated
voltage within the unit that can cause dangerous electric shocks.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol alerts the user that there are
important operating and maintenance instructions in the literature accompanying this unit.
“WARNING—FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could
void the user’s authority to operate this equipment.”
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.
CAUTION:
THIS UNIT IS A CLASS 1 LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS UNIT IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE
CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
2
Before you start
Important Safeguards
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. (Fig.A)
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
GROUND
CLAMP
Connections
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
S2898A
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Playing discs
Editing
Changing the SETUP menu
VCR functions
Others Español
3
Recording
15. Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
16. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
17. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
18. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.
19. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
20. Damage Requiring Service - Unplug this video product from
the wall outlet and refer servicing to qualified service personnel under the following conditions:
a.When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video
product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the video product to its normal operation.
e. If the video product has been dropped or damaged in any way.
f.When the video product exhibits a distinct change in performance this indicates a need for service.
21. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
22. Safety Check - Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
23. Heat - This video product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
Getting started
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments - Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
7. Water and Moisture- Do not use this video product near water,
for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8.Accessories - Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product
may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or
sold with the video product. Any mounting of the appliance should follow the
manufacturer's instructions and should
use a mounting accessory recommended
by the manufacturer.
9. Transportation - A product and cart combination should be
moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
10.Ventilation - Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the video
product and to protect it from overheating, and these openings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.This video product should
not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
11. Power Sources - This video product should be operated
only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
12. Grounding or Polarization - This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way.This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
13. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
14. Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the video product, be sure the antenna
or cable system is grounded so as to provide some protection
against voltage surges and built-up static charges.Article 810 of
the National Electrical Code, ANSI/NFPA No. 70, provides
Before you start
Precautions (cont’d)
Before you start
Precautions (cont’d)
Location and Handling
Location and Handling
• Do not cover or place the unit in enclosed spaces to prevent excessive temperature build up.
• Do not place the unit in direct sunlight, or near heat sources.
• Depending on the use environment, the temperature of the unit may increase slightly.This is not a malfunction.
• Keep the unit away from strong magnetic objects.
• Do not stand the unit vertically. Install the unit in a horizontal and stable position.
• Do not place any object containing water or other liquids on the unit. In the event that liquid should enter the cabinet, unplug the
unit immediately and contact the retailer or service centre approved by SHARP immediately.
• Do not remove the unit cabinet.Touching parts inside the cabinet could result in electric shock and/ or damage to the unit. For service and adjustment inside the cabinet, call a qualified dealer or service centre approved by SHARP.
Nonuse Periods
Location and Handling
• When the unit is not being used, switch the unit to the Standby mode.
• When left unused for a long period of time, the unit should be unplugged from the household AC outlet.
• Do not place the unit in direct sunlight, or near heat sources.
Copy Protection
This Unit supports Macrovision copy protection.
On DVD discs that include a copy protection code, if the contents of the DVD disc are copied using this unit, the copy protection code prevents the DVD or videotape copy from playing normally.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Notice for progressive scan outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts
to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there are questions regarding our TV set compatibility with this model 525p
DVD player, please contact our customer service center.
No Fingers or Other Objects Inside
Do not put your fingers or objects on the disc tray or in the cassette compartment.
Warning of Dew Formation
Moisture may form inside the unit under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When the unit is suddenly moved from a cold to warm environment.
If moisture forms inside this unit, it may not operate properly or damage the videotape. In such case, turn on the power and
wait for more than two hours for the moisture to evaporate.
Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
4
Before you start
Before you start
Precautions (cont’d)
Others
It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior
permission be obtained from copyright owners whenever necessary.
Connections
“Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678, 5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618,
5,610,985, 5,740,317, 5,777,992, 5,878,080, or 5,960,037.”
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Maintenance
Recording
Playing discs
Editing
Changing the SETUP menu
SERVICING
1. Please refer to relevant topics in the Troubleshooting on pages 97-100 before returning the product.
2. Do not attempt to service this Unit yourself. Instead, unplug it and contact a Sharp Authorized Service Center for inspection.
(See CONSUMER LIMITED WARRANTY at the end of this manual.)
3. Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, electrical shock, or other hazards.
4. Following any service or repair, be sure the service technician performs safety checks to certify that this Unit is in safe operating order.
CLEANING THE CABINET
¡Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or
abrasive.
CLEANING DISCS
¡When a disc becomes dirty, clean it with a cleaning cloth.Wipe the disc from the center out. Do not wipe in a circular motion.
¡Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analogue records.
RECOMMENDED MEASURES FOR OPTIMUM PICTURE EXCELLENCE
This Unit is a precision device constructed using extremely accurate technology.
¡The disc cannot be played if the disc drive component is worn out or if the internal pick up lens is dirty.
¡If this unit still does not perform properly although you refer to the relevant sections and to Troubleshooting on pages 97-100,
the laser optical pickup unit may be dirty. Consult a Sharp Authorized Service Center for inspection and cleaning of the laser
optical pickup unit.
DISC HANDLING
¡Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
¡Always store the disc in its protective case when it is not used.
AUTO HEAD CLEANING
¡Automatically cleans video heads as you insert or remove a videotape, so you can see a clear picture.
¡Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video
heads after a long period of use, or the usage of rental or worn videotape can cause this problem. If a streaky or snowy picture
appears during playback, the video heads in your unit may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem, please call our help line mentioned on page 103 to locate a Sharp Authorized
Service Center.
Getting started
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
VCR functions
Others Español
5
Before you start
Table of contents
Before you start . . . . . . . . . . . . . . . . . . .2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Functional overview . . . . . . . . . . . . . . . . . . . . . . .8
Installing batteries in the remote control . . . . . . . . .10
Using a remote control . . . . . . . . . . . . . . . . . . . . . .10
The VCR/DVD recorder Switching . . . . . . . . . . . . . .10
SETUP/DISC/CD menu . . . . . . . . . . . . . . . . . . . . . . .11
DISPLAY menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connections . . . . . . . . . . . . . . . . . . . . .14
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . .14
Connection to a cable box or satellite box . . . .15
Connection to an Audio System . . . . . . . . . . . . .16
Getting started . . . . . . . . . . . . . . . . . . .17
Easy DVD recording . . . . . . . . . . . . . . . . . . . . . .17
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . .19
Getting channels automatically . . . . . . . . . . . . . . . . .19
Adding/deleting channels . . . . . . . . . . . . . . . . . . . . .20
Selecting the TV stereo or SAP . . . . . . . . . . . . .21
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . .22
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .22
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . .23
Setting the daylight saving time . . . . . . . . . . . . . . . .25
Selecting the TV aspect ratio . . . . . . . . . . . . . . .26
Recording . . . . . . . . . . . . . . . . . . . . . . .27
Information on DVD recording . . . . . . . . . . . . . .27
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Restrictions on recording . . . . . . . . . . . . . . . . . . . .27
Information on copy control . . . . . . . . . . . . . . . . . .28
Making discs playable in other DVD player (Finalize) 28
Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . .29
Choosing the recording format of a blank disc . . . .29
Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . .30
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . .31
Checking the recording picture quality . . . . . . . . . .32
One-touch timer recording . . . . . . . . . . . . . . . .33
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . .34
Hints for timer recording . . . . . . . . . . . . . . . . . . . . .36
Settings for an external source . . . . . . . . . . . . . .37
Connection to an external source . . . . . . . . . . . . . .37
Recording from an external source . . . . . . . . . . . . .38
Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . .41
Setting a disc to protect . . . . . . . . . . . . . . . . . . .42
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . .52
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Repeat/Random/Program play . . . . . . . . . . . . . .54
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Selecting the format of audio and video . . . . . .56
Switching audio soundtrack . . . . . . . . . . . . . . . . . . .56
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .57
Switching camera angles . . . . . . . . . . . . . . . . . . . . . .58
Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .58
Editing . . . . . . . . . . . . . . . . . . . . . . . . .59
Information on disc editing . . . . . . . . . . . . . . . . .59
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . . .59
Editing discs in Video mode . . . . . . . . . . . . . . . . . . .59
Editing discs in VR mode . . . . . . . . . . . . . . . . . . . . .60
Editing DVD-RW discs in Video mode . . . . . . . .61
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .62
Setting or clearing chapter markers . . . . . . . . . . . . .64
Editing DVD-RW discs in VR mode (Original) . .65
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .66
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .67
Setting or clearing chapter markers . . . . . . . . . . . . .69
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .70
Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .72
Releasing titles from protecting . . . . . . . . . . . . . . . .73
Editing DVD-RW discs in VR mode (Playlist) . . .74
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .75
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .76
Setting or clearing chapter markers . . . . . . . . . . . . .78
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .79
Adding titles to a Playlist . . . . . . . . . . . . . . . . . . . . .81
Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Editing DVD-R discs . . . . . . . . . . . . . . . . . . . . . .83
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .84
Changing the SETUP menu . . . . . . . . .85
Tour of the SETUP menu . . . .
Language setting . . . . . . . . . . .
Display setting . . . . . . . . . . . . .
Audio setting . . . . . . . . . . . . . .
Settings for Parental lock level
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.85
.86
.88
.90
.92
Playing discs . . . . . . . . . . . . . . . . . . . . .43
VCR functions . . . . . . . . . . . . . . . . . . .94
Information on DVD play . . . . . . . . . . . . . . . . . .43
Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Playing discs using the disc menu . . . . . . . . . . . . . . .46
Playing discs using the title menu . . . . . . . . . . . . . . .47
Special playback . . . . . . . . . . . . . . . . . . . . . . . . .48
Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . .48
Skipping TV commercials during play . . . . . . . . . . . . .49
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Step by step playback . . . . . . . . . . . . . . . . . . . . . . . .50
Slow forward / Slow reverse play . . . . . . . . . . . . . . .50
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Recording and One-touch timer recording . . . .94
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
One-touch timer recording . . . . . . . . . . . . . . . . . . . .95
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Index search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Other operations . . . . . . . . . . . . . . . . . . . . . . . .96
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .97
RF converter output . . . . . . . . . . . . . . . . . . . . .100
Language code . . . . . . . . . . . . . . . . . . . . . . . . .101
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Service Information (For the U.S.) . . . . . . . . . .103
6
Español . . . . . . . . . . . . . . . . . . . . . . . .104
Others . . . . . . . . . . . . . . . . . . . . . . . . .97
Before you start
Before you start
Features
This unit not only plays DVDs, CDs and VHS tapes but also offers features for you to record to DVD discs
and edit them after that.The following features are offered with this unit.
DVD mode
Setting/Clearing chapter markers:
You can easily add chapter markers anywhere in your
recordings for easy editing. (VR mode)
Making your own Playlist:
With the original remains as it is, you can edit titles on
Various playlist as you prefer.
Putting names on titles.
Setting pictures for thumbnails.
Setting/clearing chapter markers.
Deleting parts of titles, etc.
Protecting titles:
To avoid editing or erasing titles, the protect function is
useful when it is ON in the original list.
Symbol in this operation manual
Many functions of this unit are depending on the disc type or the
recording mode.
To specify for what disc type or recording mode each function is, we
put the following symbols at the beginning of each item to operate.
Description
Symbol
Available to DVD Video discs
DVD-V
Video
Available to DVD-RW in Video mode
DVD-RW
VR
DVD-RW
Available to DVD-RW in VR mode
DVD-R
Available to DVD-R discs
Video
DVD+RW
Available to DVD+RW in Video mode
DVD+R
Available to DVD+R discs
CD
Available to Audio CDs
MP3
VCR
DVD
First:
(Press:)
VCR
Available to CD-RW/R discs with
MP3 files
Available to VHS tapes
Use only
tapes marked with
this unit.
Indicates that you need to select the DVD
mode by pressing DVD button on the
remote control before proceeding next step.
Indicates that you need to select the VCR
mode by pressing VCR button on the
remote control before proceeding next step.
7
Others Español
First:
(Press:)
VCR functions
VCR mode
Quick search for what you want to watch:
You can easily find the part you want to watch using the Index
search/Time search functions.An index mark will be assigned at
the beginning of each recordings you make. For Time search function, you can go to a specific point on a videotape by entering
the exact amount of time you wish to skip.
Progressive Scan system
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher resolution than that of traditional television signals.
Changing the SETUP menu
DVD mode
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which is
compatible with Dolby Digital or DTS, you are allowed to experience the theater surround sound from discs with surround
sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using the search
function. Search for a desired point on a disc by title, chapter, or
time.
Start to play from Original and Playlist (VR mode):
Title playing is available from either an Original list or Playlist.
Others
Editing
Play
DVD mode
Available for playing discs recorded in Video mode
on a regular DVD player (Video mode):
Discs recorded in the Video mode can be played on regular
DVD players, including computer DVD drives compatible with
DVD-Video playback*.You will need to finalize the discs
recorded in Video mode to play in other DVD players.
* DVD-Video Format (Video mode) is a new format for recording on DVD-RW/R discs that was approved by the DVD Forum
in 2000. Adoption of this format is optional for manufactures of
DVD playback devices and there are DVD-Video players, DVDROM drives or other DVD playback devices that do not play
DVD-RW/R discs recorded in the DVD-Video Format.
Playing discs
DVD mode
REC MONITOR:
You can confirm the picture quality for recording in the current
recording speed which you set.
If you want to change the recording speed, press REC
MODE/REC SPEED button to set the desired recording mode.
Automatic Chapter marker setting:
Chapter markers will be put on recordings as you set in
SETUP menu before attempting to record.
Automatic Title menu making:
The unit makes title menus automatically when finalizing
the disc which are recorded in Video mode.
Automatic PLAYLIST making (VR mode):
A Playlist will be prepared from an Original list, so that
you can edit titles in a Playlist as you prefer.
An Original list is kept as it is.
Compatibility
Recording
DVD mode VCR mode
This unit is compatible with both DVD-RW, which is rewritable
repeatedly, and DVD-R, which is available for recording once.
Also, this unit allows you to record to the videotape. You can
choose either one for your convenience.
Up to 8 programs recording:
You can program the unit to record up to 8 programs, up
to a year in advance. Daily or weekly program recordings
are also available.
One-touch timer recording:
You can easily set a recording time as you prefer. Every
time the REC/OTR button on the remote control or on
the front panel pressed during recording, the recording
time will be increased by 30 minutes up to 8 hours.The
recording automatically stops when the recording time
you set is reached.
Dubbing mode:
You can copy a DVD disc to a videotape or copy a videotape to a DVD disc.This function will be possible only if
the DVD disc or a videotape is not copy protected.
You cannot record on a videotape when its record tab is
removed.
Getting started
Editing
Connections
Recording
Before you start
Functional overview
3* 4 5
2
Front Panel
6
OPEN/CLOSE
(*) The unit can also
be turned on by
pressing these
buttons.
POWER
STOP/EJECT
REW
F.FWD
PLAY
VCR
STOP
DVD
PLAY
S-INPUT
VIDEO L(MONO) - AUDIO - R
REC/OTR
REC/OTR
CHANNEL
(TRACKING)
1
20
21 19 18 17 16
1.
POWER button / indicator (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode. Press to cancel the timer
standby mode, then turn the unit on.
Red LED lights up when power is on.
2. Cassette compartment (VCR)
Insert a videotape here.
3. A OPEN/CLOSE button (DVD)*
Press to open or close the disc tray.
4. VCR indicator
This indicator appears when the VCR output mode is selected.
5. DVD indicator
This indicator appears when the DVD output mode is selected.
6. Disc tray (DVD)
Place a disc when open.
7. AUDIO INPUT jacks (LINE2) (DVD/VCR)
Use to connect external equipment with standard audio cables.
8. VIDEO INPUT jack (LINE2) (DVD/VCR)
Use to connect external equipment with a standard video cable.
9. S-VIDEO INPUT jack (LINE2) (DVD only)
Use to connect the S-Video output of external equipment with an S-Video cable.
10. REC/OTR button (DVD)
Press once to start recording.
Press repeatedly to start a One-Touch timer Recording.
11. PLAY button (DVD)*
Press to start or resume play.
DUBBING
OUTPUT SELECT
15 14 13 12* 11* 10 9 8 7
12. STOP button (DVD)*
Press to stop playback or recording.
Press to stop the proceeding timer recording in DVD.
13. OUTPUT SELECT button (DVD/VCR)
Press to select the component you wish to operate.
14. DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the SETUP menu.
15. CHANNEL L / K button (DVD/VCR)
Press to change the channel up and down.
16. PLAY button (VCR)
Press to start playback.
17. Remote control sensor (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
18. REC/OTR button (VCR)
Press once to start a recording. Press repeatedly to
start a One-Touch timer Recording.
19. F.FWD button (VCR)
Press to rapidly advance the videotape, or view the picture rapidly in forward during playback. (Forward Search)
20. REW button (VCR)
Press to rewind the videotape, or to view the picture rapidly in reverse during the playback mode. (Rewind Search)
21. STOP/EJECT button (VCR)
EJECTbutton-Press to remove the videotape from the
cassette compartment when the power is on or off.
STOP button-Press to stop videotape playback.
Press to stop the proceeding timer recording in VCR.
1
2 3
4 5
6
Rear Panel
DIGITAL
AUDIO
AUDIO OUT OUT
DVD
S-VIDEO
COMPONENT
VIDEO OUT
Y
L
COAXIAL
PB/CB
IN
R
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
VIDEO IN VIDEO OUT
OUT
PR/CR
• These jacks are
OUT
useful only in
DVD mode.
8. VIDEO OUTPUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with a standard video cable.
9. VIDEO INPUT jack (LINE1) (DVD/VCR)
Use to connect external equipment with a standard
video cable.
10. S-VIDEO OUTPUT jack (DVD only)
Use to connect the S-Video input of a TV monitor, AV
receiver or other equipment with an S-Video cable.
11. AUDIO OUTPUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
12. COAXIAL DIGITAL AUDIO OUTPUT jack
(DVD only)
Use to connect an AV receiver, Dolby Digital decoder
or other equipment with a coaxial digital input jack
with a digital coaxial cable.
12 11 10
1.
2.
3.
4.
5.
6.
7.
AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
S-VIDEO INPUT jack (LINE1) (DVD only)
Use to connect the S-Video output of external equipment with an S-Video cable.
COMPONENT VIDEO OUTPUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with component video cables.
AUDIO INPUT jacks (LINE1) (DVD/VCR)
Use to connect external equipment with standard
audio cables.
AUDIO OUTPUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
TV ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
TV ANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal
from the TV ANTENNA IN to your TV monitor.
9 8
7
Note: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause perma8
nent damage to the unit.
Before you start
Remote Control
POWER
REC MODE
REC SPEED
AUDIO
ABC
DEF
2
3
OPEN/CLOSE
1
.@/:
1
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
15*
16
CH
VIDEO/TV
SLOW
SPACE
0
4
3
DISPLAY
12
8
9
11
19
PAUSE
PLAY
23
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
25
CM SKIP
RETURN
SKIP
SKIP
27
28
29
20
22*
24*
26
30
13
Editing
Changing the SETUP menu
VCR functions
Others Español
9
Playing discs
1. POWER button (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have
been set, press to set the unit
in timer-standby mode. Press
to cancel the timer standby
mode, then turn the unit on.
2. Number buttons (DVD/VCR)
Press to select channel numbers.
Press to select a title/chapter/track on display or a TV
channel.
Also press to enter values for
the settings in the SETUP menu.
3. DISPLAY button (DVD/VCR)
Press to display or change the
on-screen display.
4. VCR button
Press to activate the remote
control in VCR mode. (Refer
to page 10)
Press to select the VCR output mode.
5. E button (DVD/VCR)
• DVD mode
During playback, press to fast
reverse.
Or when playback is paused,
press to play slow reverse.
• VCR mode
Press to rewind the videotape or
to view the picture rapidly in
reverse during the playback mode.
6. REC/OTR button (DVD/VCR)
Press once to start a recording.
Press repeatedly to start a
One-Touch timer Recording.
Recording
(*) In DVD mode, the unit can also be
turned on by pressing these buttons.
18. VIDEO/TV button (DVD/VCR)
Press to select VIDEO or TV
position.
19. SLOW button (VCR)
During playback, press to
view the videotape in slow
motion.
20. PAUSE F button
(DVD/VCR)
Press to pause play or recording.
21. DVD button
Press to activate the remote
control in DVD mode. (Refer
to page 10)
Press to select the DVD output mode.
22. PLAY B button *
(DVD/VCR)
Press to start or resume play.
23. D button (DVD/VCR)
• DVD mode
During playback, press to fast
forward.
Or when playback is paused,
press to play slow forward.
• VCR mode
Press to rapidly advance the
videotape or view the picture
rapidly in forward during playback.
24. STOP C button *
(DVD/VCR)
Press to stop playback or
recording.
25. TIMER PROG. button
(DVD/VCR)
Press to display the timer
program setting menu.
26. ENTER button
(DVD/VCR)
Press to confirm or select
menu items.
27. K / L / { / B buttons
(DVD/VCR)
Press to select items or settings.
28. RETURN
button
(DVD/VCR)
Press to return to the previously displayed menu screen.
29. ZOOM button (DVD)
During playback, press to
enlarge the picture on the
screen.
30. SKIP H button (DVD)
During playback, press to skip to
the previous chapter or track.
Or when playback is paused, press
to play reverse step by step.
SKIP G button (DVD)
During playback, press to skip to
the next chapter or track.
Or when playback is paused, press
to play forward step by step.
Getting started
10
6
DVD
18
21
5
7
VCR
17
7. SETUP button (DVD/VCR)
Press to display the setup menu.
During DVD playback, press and
hold for more than 3 seconds
to switch to the progressive
scanning mode or the interlace
mode.
8. REC MONITOR button (DVD)
Press to check the video signal
to be recorded before
attempting.
9. MENU/LIST button (DVD)
Press to display the Disc menu.
Press to change ORIGINAL
and PLAYLIST on the TV
screen.
(VR mode only)
10. TOP MENU button (DVD)
Press to display the top menu.
11. CLEAR/C.RESET button
(DVD/VCR)
• DVD mode
Press to clear the password once
entered, to cancel the programming for CD, to clear the selecting marker number in the marker
setup mode or to clear the program once entered in the timer
recording setting mode,etc.
• VCR mode
Press to reset the tape counter.
12. SEARCH MODE button (VCR)
Press to call up the index or
time search menu.
13. CM SKIP button (DVD)
During playback, press to skip
30 seconds.
14. REC MODE/REC SPEED
button (DVD/VCR)
Press to switch the recording
speed.
15. OPEN/CLOSE A button (DVD)*
Press to open or close the
disc tray.
16. AUDIO button (VCR)
During playback a HiFi videotape, press to change the
AUDIO OUT setting “HiFi”
and “MONO”.
17. CH K / L buttons (DVD/VCR)
• DVD mode
Press to change the channel
up and down.
• VCR mode
Press to change the channel
up and down.
Press to adjust the tracking
during playback or in slow
motion of the videotape.
Also while playback is in still
mode, you can adjust the picture blurred vertically.
Connections
2
14
Before you start
Functional overview (cont’d)
Before you start
Functional overview (cont’d)
Installing batteries in the remote control
Using a remote control
Install two “AA” size batteries (supplied) matching
the polarity indicated inside battery compartment of
the remote control.
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote control and the remote sensor of the unit.
• Use within the operating range and angle as
shown.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the
remote sensor of the unit.
• Remote control for different devices can interfere
with each other. Avoid using remote control for
other equipment located close to the unit.
• Replace the batteries when you notice a fall off in
the operating range of the remote control.
1
2
3
Within about
23feet (7m)
POW
ER
STOP/E
JECT
PLAY
REW
F.FWD
OPEN
/CLOS
E
REC/O
TR
VCR
CHAN
(TRAC
NEL
DVD
KING)
STOP
DUBB
ING
OUTPU
T SELEC
T
PLAY
REC/O
TR
60˚
Remote
control
REC
PAUS
k
E
h
REV
PLA
B Y
P
U/
MEN AL
GIN
STOC
G
TOP
ORI
PLA
T
NU
LIS
ME Y
R
D
g
FW
K
ENTE
IP
P
SK
H
Note:
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together,
although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of each
battery match the indications in the battery compartment.
• Remove batteries from equipment that is not going
to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or disassemble batteries.
The VCR/DVD recorder Switching
Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with the OUTPUT SELECT button.
OUTPUT SELECT button
VCR MODE
Press the VCR button on the remote control.
(Verify that the VCR indicator is lit.)
OPEN/CLOSE
POWER
STOP/EJECT
REW
F.FWD
PLAY
VCR
DVD
STOP
POWER
PLAY
REC MODE
REC SPEED
AUDIO
ABC
DEF
CHANNEL
(TRACKING)
DUBBING
OUTPUT SELECT
.@/:
1
2
GHI
DVD MODE
Press the DVD button on the remote control.
(Verify that the DVD indicator is lit.)
VCR button
DVD button
10
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CH
VIDEO/TV
SLOW
0
DVD
DISPLAY
VCR
REC/OTR
SETUP
PAUSE
PLAY
VCR
DVD
STOP
DVD indicator
Note
• Pressing only the OUTPUT SELECT button
on the front panel DOES NOT switch the mode
of the remote control.You MUST select the correct mode on the remote control.
• Pressing the SETUP or the TIMER PROG.
button switches the unit to the DVD mode.
OPEN/CLOSE
REC/OTR
REC/OTR
OUTPUT SELECT
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
VCR indicator
SEARCH
MODE
RETURN
SKIP
CM SKIP
DVD/VCR RECORDER
SKIP
Before you start
Before you start
Functional overview (cont’d)
Guide to Displays on screen menu
This unit uses the following on screen menu for most operations: SETUP/DISC/CD menu,
Title list, and DISPLAY menu.They allow you to change the playing status of disc during play.
The DISPLAY menu also gives you information on the status of the disc or a videotape.
Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by pressing { / B
buttons.Then, press ENTER button to display each menu.
These menus provide entries to all main functions of the unit.
Disc Setting
1
2
3
4
5
6
CD Playback Mode
Disc
CD Playback Mode
Edit
Random Play
Format
Program Play
Playing discs
Setup
Recording
Setup Menu
“CD” is available only when an
Audio CD disc or a CD-RW/R
disc with MP3 files is inserted
into the unit.
Finalize
Disc Protect OFF
ON
1 2 3 4
Getting started
“DISC” is available only when a DVD-RW/R disc is
inserted into the unit.
When a DVD-Video disc (commercially available),
new DVD-R disc, or the finalized DVD-R disc is
inserted into the unit, you cannot select “DISC”.
“SETUP” is available only in the
Stop mode.
Connections
SETUP/DISC/CD menu
1 2
Playback Setting
3. Display:
To set up the OSD screen and the
front display of the unit as you
prefer.
6. Channel:
To adjust the channel setting of
the unit as you prefer.
11
Others Español
5. Clock:
To set up the clock of the unit as
you need.
2. Program Play(Audio CD
only):
To activate the programmed playback feature.
VCR functions
4. Select Video:
To choose a line input to record
to DVD discs from other video
equipment.
1. Random Play:
To activate the random playback
feature.
Changing the SETUP menu
2. Recording:
To set up the unit to record to
discs or videotapes as you prefer.
1. Edit:
Turns on a title list, (When a disc with
VR mode is inserted, 'Original' or
'PlayList' is available.), which shows
the recorded titles on the disc.
2. Format (DVD-RW only):
Allows you to erase all of the
recorded content on the disc.
The disc will be completely blank.
• Erased content cannot be called
back. Please make sure before you
format a disc.
• A DVD-RW disc formatted with
this unit cannot be used in other
DVD recorders without any
recording using this unit.
• If you want to use a disc only formatted with this unit on another
DVD recorder, you have to re-format the disc on that recorder.
3. Finalize:
Allows you to finalize a disc containing recorded titles.
4. Disc Protect (VR mode only) :
Allows you to protect a disc from
accidental editing or recording.
Editing
1. Playback:
To set up the unit to play discs as
you prefer.
Before you start
Functional overview (cont’d)
DISPLAY menu
DVD mode
First:
DVD
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
Details are on page 43.
4
1
1
1
00:00:00
DVD-RW
Video mode
SP 1:25 Rem.
5
CH 1
STEREO
2
3
1. Indicates a disc type and a
format mode.
Note: In some descriptions on
this manual, only one disc type
is indicated as an example.
2. Indicates a recording mode
and possible recording time.
3. Indicates a current channel
number and an audio status of
the program.
4. Indicates a title number, chapter number and the time
elapsed of disc play.
5. Each icon means:
: Search
:Audio
: Subtitle
:Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
VCR mode
First:
VCR
Press DISPLAY button to call up
the display menu.
1
2
CH21
STEREO
12
SP
0:00:00
HIFI
3
4
5
1. Playback status of the current
videotape.
2. Indicates a current channel
number and an audio status of
the program.
3. Indicates a recording speed
only five seconds.
4. Indicates a Tape Counter.
5. Audio status of the current
videotape.
Before you start
Before you start
Functional overview (cont’d)
Front Panel Display Guide
4
2
Connections
1
3
7
6
3. Recording mode/speed
Indicates the recording speed of
the disc or a videotape.
4. Title/Track and Chapter
mark
: Appears when indicating
a title/track number.
: Appears when indicating
a chapter number.
5. Displays the following
• Playing time / remaining time
• Current title / chapter / track
number
• Recording time
• Clock
• Channel number
• VCR tape counter
• Remaining time for a onetouch timer recording
7.
: Appears in the afternoon with the clock
displaying.
Editing
6.
Playing discs
:
Appears when the progressive scan system is
activated.
Display message
Appears when the disc
tray is closing.
Appears when data is
being recorded on a
disc.
13
Others Español
Appears when a disc is
loaded on the disc tray.
VCR functions
Appears when the disc
tray is opening.
Changing the SETUP menu
2. Disc type and Current
status of the unit
: Appears when an audio CD
or a disc with MP3 files is
inserted in the disc tray.
: Appears when a DVD disc
is inserted in the disc tray.
Appears when the timer
recording is proceeding in
DVD.
Appears when DVD is in
the timer recording standby mode.
:
Appears when a DVD-R disc
is inserted in the disc tray.
:
Appears when a DVDRW disc is inserted in
the disc tray.
: Appears when the timer
recording is proceeding in
VCR.
Appears when VCR is in
the timer recording standby mode.
:
Appears during VCR to DVD
duplication process.
:
Appears during DVD to VCR
duplication process.
Recording
1. Current status of the unit
: Appears when a disc or a
videotape play is paused.
: Appears when playing a
disc or a videotape.
: Appears when the timer
programming has been
set and is proceeding.
: Appears during recording
process.
:
Appears during repeat
play.
: Appears when a videotape is in the unit.
Getting started
5
Connections
Connection to a TV
Antenna
(Back of TV)
or
Antenna
(Back of TV)
Cable
Signal
Cable
Signal
3
or
Connect
Round Coaxial Cable
(supplied)
1
Disconnect
DIGITAL
AUDIO
AUDIO OUT OUT
DVD
S-VIDEO
COMPONENT
VIDEO OUT
Y
L
COAXIAL
PB/CB
IN
R
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
VIDEO IN VIDEO OUT
2
OUT
PR/CR
Connect
OUT
(Back of this unit)
4 Plug in the AC power cord of this unit.
Make one of the following connections, depending on the capabilities of your existing equipment.
Basic Audio
Method 1
Method 2
Good picture
Better picture
Method 3
Best picture
TV
AUDIO IN
VIDEO IN
COMPONENT
VIDEO IN
S-VIDEO IN
Y
PB/CB
PR/CR
Video
cable
(supplied)
Audio cable
(supplied)
S-Video
cable
(commercially
available)
This unit
Component
Video cables
(commercially
available)
DVD
DVD/VCR
AUDIO OUT
T
AUDIO
OUT
DVD
S-VIDEO
COMPONENT
VIDEO OUT
Y
PB/CB
L
IN
R
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
COMPONENT
VIDEO OUT
DVD
S-VIDEO
Y
PB/CB
R
R
VIDEO IN VIDEO OUT
DVD/VCR
L
OUT
VIDEO OUT
PR/CR
OUT
PR/CR
OUT
or
DVD
AUDIO
OUT
DIGITAL
AUDIO OUT
DVD
AUDIO
S-VIDEO
COMPONENT
VIDEO OUT
OUT
Y
PB/CB
L
COAXIAL
IN
R
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
L
R
VIDEO IN VIDEO OUT
OUT
PR/CR
OUT
R
• These jacks are useful
only in DVD mode.
AUDIO OUT
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
• Method 2 and method 3 are only useful in DVD mode.
• Although you can view images when using the connection Method 1 and 2 while Progressive Scan is activated, they are in Interlace mode.
If your TV is compatible with Progressive Scan (480p) and you want to
enjoy that high quality picture;
You must select the connection Method 3 above and Progressive Scan mode.To set the
mode, press and hold the SETUP button on the remote control for more than 3 seconds
during DVD playback, so that “P.SCAN” will appear on the display of this unit.
If your TV is not compatible with Progressive Scan;
Use this unit in Interlace mode. Make sure that no “P.SCAN” is on the display of this unit.
If not, press and hold the SETUP button on the remote control for more than 3 seconds
during DVD playback, so that “P.SCAN” on the display of this unit will disappear.
14
PLAY
STOP
REC/OTR
SETUP
REC MONITOR
MENU/LIST TOP MENU
TIMER PROG.
ENTER
RETURN
more than 3 seconds
during DVD playback
[Interlace mode]
[Progressive Scan mode]
Connections
Before you start
Connection to a cable box or satellite box
Connection A
(Cable box or
Satellite box)
OUT
ANTENNA
IN
OUT
Round Coaxial Cable
Cable
Signal
Connections
IN
(Back of this unit)
DVD/VCR
E
(supplied)
(Back of TV)
Getting started
Select this connection when you want to view or record a scrambled channel.With this connection, channels
cannot be changed on this unit.You can view or record ONLY the channels you have selected on the cable
box or the satellite box.
• While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
1) Turn on this unit by pressing POWER button.The “POWER” indicator on the front panel will appear.
Then, press the CHANNEL buttons to select channel 3 or 4 (the same channel as the output channel of
the cable box or satellite box).
• If noise appears on the TV screen, press VIDEO/TV button on the remote control.
• If you use the channel 4, you will need to change this unit’s RF output to channel 4. Refer to “RF converter
output” on page 100.
2) At the TV, select channel 3 or 4 (the same channel as you have selected at step 1).
3) At the cable box or satellite box, select the channel you want to view or record.
Recording
(Back of this unit)
Connection B
ANTENNA
IN
Cable
Signal
OUT
(Cable box or
Satellite box)
IN
Playing discs
DVD/VCR
E
OUT
(Back of TV)
Editing
Round Coaxial Cable (supplied)
Round Coaxial Cable
Select this connection when you want to change channels on this unit.With this connection, you may watch
one channel while recording another.
• You may not view or record a scrambled channel.
To select channels of the cable box or satellite box
1) At the cable box or satellite box, select channel 3 or 4 (the same channel as this unit’s RF output channel.)
• Refer to “RF converter output” on page 100.
2) At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box.
3) Turn on this unit by pressing POWER button. The “POWER” indicator on the front panel will appear.
Then, select the channel you want to view or record.
• If noise appears on the TV screen, press VIDEO/TV button on the remote control.
To playback a DVD disc or a videotape
Follow the steps 1) to 2) above, to playback a DVD disc or a videotape.
• Refer to “Playback” on pages 44-45, 94.
To view one channel while recording another
1) While you are recording on this unit, press VIDEO/TV button.
2) At the cable box or satellite box, select the channel you want to view.
Changing the SETUP menu
VCR functions
15
Others Español
Note to the Cable TV System Installer :
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as possible.
Getting started
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
Method 1
Method 2
Stereo system
Dolby Digital decoder, DTS decoder,
MD deck or DAT deck
Analog audio
input jacks
AUDIO
COAXIAL
Digital audio
input jack
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
This unit
DVD/VCR
AUDIO OUT
AUDIO OUT
L
R
DVD
DIGITAL
AUDIO OUT
DIGITAL
AUDIO OUT
COAXIAL
or
DVD
AUDIO
OUT
L
R
16
Note
• If output is Dolby Digital encoded audio, connect
to a Dolby Digital decoder and set “Dolby Digital”
to “Stream” for the “Digital Out” setting in the
SETUP menu. (Refer to pages 90-91.)
• If output is DTS encoded audio, connect to a DTS
decoder and set “DTS” to “ON” for the “Digital
Out” setting in the SETUP menu. (Refer to pages
90-91.)
• The audio source on a disc in a Dolby Digital 5.1
channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• Unless connected to a Dolby Digital decoder or a
DTS decoder, set “Dolby Digital” to “PCM” and
“DTS” to “OFF” for the “Digital Out” setting in the
SETUP menu. Playing a DVD using incorrect settings
may generate noise distortion and may also damage
the speakers. (Refer to pages 90-91.)
• Set “Dolby Digital” to “PCM” for the “Digital Out”
setting in the SETUP menu for connecting to an
MD deck or DAT deck. (Refer to pages 90-91.)
• By hooking this unit up to a Multi-channel Dolby
Digital decoder, you can enjoy high-quality Dolby
Digital 5.1 channel surround sound as heard in the
movie theaters.
• By hooking this unit up to the DTS decoder, you
can enjoy 5.1channel surround system which reproduces the original sound as truthfully as possible.
5.1channel surround system is developed by the
Digital Theater System, Inc.
Getting started
Before you start
Easy DVD recording
The following will help you to understand easily how to record to DVD discs.
Note:
Make sure batteries are in the remote control and you have connected this unit and the TV correctly.
Step 1: Choose a disc type
Step 2: Insert a blank disc
Remote Control
POWER
1
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
2
Open the
disc tray
DEF
CH
Getting started
Turn on
the unit
OPEN/CLOSE
Connections
There are several types of recordable DVD discs
to choose from. Choose a recordable DVD disc
type based on your playing/recording/editing
requirements. See “DVD disc types” at the bottom of this page for more information on the differences among various compatible media.
This DVD recorder can record on the following
type of discs.
4.7
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
POWER
OPEN/CLOSE
3
Recording
Close the
disc tray
CH
Playing discs
* This unit cannot record on the following discs.
• DVD-RW Ver 1.2 / 2-4x CPRM compatible
• DVD-R General Ver 2.0 / 8x
For example, when you want to record repeatedly on the same disc or when you want to edit the
disc after recording, select the rewritable DVDRW type disc.
When you want to save recordings without any
alteration, a non-rewritable DVD-R can be your
choice.
Loading
This operation may take a
while to be recognized.
.
: Most suitable.
: Can be used.
: Some functions are limited.
DVD-RW VR
DVD-R
DVD-RW VR
DVD-RW Video
DVD-R
Rewritable?
Yes
Yes
No
Can create chapters at fixed intervals (auto.)
Yes
Yes
Yes
Reuse by deleting unwanted contents
Edit recorded contents
Edit/Record from connected equipment
Copy discs for distribution
*1
Play on other DVD equipment
*1
Features
Recording
Yes
No
No
Can record 16:9 size pictures
Yes
Yes
Yes
Can record Copy-Once programs
Yes
No
No
Can perform basic edit functions
Yes
Yes
Yes
Can perform advanced edit functions (Playlist edit)
Yes
No
No
Editing
*1
DVD-RW (VR mode) can only be played on DVD
equipment that is VR compatible.
Note:
For details of the above functions and implied
restrictions, see the explanations inside the manual.
17
Others Español
Can create chapters wherever you like (manual)
VCR functions
DVD-RW Video
Record TV programs
Changing the SETUP menu
You want to
: Cannot be used.
Insert the disc in the unit.
Then, format the disc from
SETUP menu.Video format
(Video mode) or Video
recording format (VR mode)
will be available depending on
the disc type inserted.This is
necessary to prepare the disc
for recording. Details are on
pages 29-30.
When you format, the entire
contents on that disc will be
erased.
• The unit automatically
starts formatting when an
unused disc is inserted.
Editing
Format the disc
DVD disc types
Getting started
Easy DVD recording (Cont’d)
Step 3: Select the
Recording
speed
1
Step 4: Select the
desired
channel
Step 5: Record to
DVD discs
To select the DVD mode
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
POWER
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
2
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
POWER
2
VCR
CH
VIDEO/TV
7
PAUSE
OPEN/CLOSE
STOP
CH
REC/OTR
VIDEO/TV
SETUP
TIMER PROG.
ENTER
REC MONITOR
SLOW
SPACE
SLOW
DVD
PAUSE
PLAY
0
0
DISPLAY
DVD
VCR
DISPLAY
1
VCR
DVD
PAUSE
To select the recording
speed
SP 2:01 Rem.
CH 1
I
Hint 1: Play the recorded contents
You can select the title you want to play from a displayed menu and immediately
start to play. Recorded contents are easily Start Rec.
Stop/Start
Stop Rec.
accessible, with simple procedure of choosing a title on a chapter in the menu screen.
What are titles and chapters?
The contents of a DVD disc are generally
divided into titles.Titles may be further
divided into chapters.
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Hint 2: Edit the recorded disc
Step 6: Stop the
Record
PQRS
7
WXYZ
8
9
VIDEO/TV
SLOW
0
DISPLAY
You will find editing discs is easy.This unit offers convenient edit functions
which are possible only with DVD-R/RW discs.
You can edit the following from a title list.
TUV
SPACE
VCR
DVD
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
• Putting names on titles
• Setting pictures for thumbnails (VR mode)
• Setting/clearing chapter markers
• Deleting parts of titles or scenes (VR mode)
Title Delete :This deletes an entire scene permanently from the disc.
Scene Delete :This allows a user to edit within a specific scene (ex. commercials).
Original and Playlist (VR mode)
You can edit the recordings in Playlist without changing the original recordings. A Playlist does not take up much disc space.
58%
Writing to Disc
What “Original” or “Playlist” is for?
Throughout this manual, you will find Original and Playlist to refer to the actual
content and the edited version.
• Original content refers to what’s actually recorded on the disc.
• Playlist content refers to the edited version of the disc; how the Original
content is to be played.
Finalizing a Disc
• This will allow a disc that is recorded on our unit to be played back on a different DVD player- without finalization it will not be playable on another player.
• After finalizing a disc if the recording was in video mode, you can not edit any
information that is on that disc.
• If you have recorded in VR mode on DVD-RW disc then editing is still permitted after finalizing.
18
This operation may
take a while to be
completed.
Getting started
Before you start
Channel setting
4
POWER
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Getting channels automatically
1
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
OPEN/CLOSE
DEF
SPACE
CH
Connections
All channels are stored in the unit
when purchased.We recommend
that you get available channels in
your area stored using “Auto
Preset” in the Channel Preset of
the SETUP menu.
VIDEO/TV
SLOW
0
Setup
DISPLAY
DVD
VCR
PAUSE
PLAY
Press POWER button to turn
on the unit.
3
7
Playback Setting
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
2
5
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
VCR
DVD
Auto Preset
TV Audio Select
Stereo
6
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
CH 18
Auto Presetting Now
Note
Setup Menu
19
Others Español
Press SETUP button to exit.
•You can select only the channels
memorized in this unit by using
the CHANNEL buttons.
VCR functions
7
• If the auto presetting is cancelled during presetting, some
channels not yet preset may
not be received.
• The selection will depend on
how you receive the TV channels.
To cancel the auto presetting during scanning:
Press RETURN button or
SETUP button to cancel.
Changing the SETUP menu
Select “Auto Preset” using K
/ L buttons, then press
ENTER button.
The unit will start getting channels available in your area.
To select a channel
You can select a channel by
directly entering channel using
the Number buttons on the
remote control.
Notes for using the
Number buttons:
• When selecting cable channels
which are higher than 99,
enter channel numbers as a
three-digit number.(For example: 117, press 1,1,7)
• You must precede single-digit
channel numbers with a zero
(For example: 02, 03, 04 and
so on).
• You can select the line input
mode (“L1” or “L2”).To select
“L1” by pressing [0],[0],[1].To
select “L2” by pressing
[0],[0],[2].Details are on page 38.
Editing
3
SKIP
Playing discs
Manual Preset
SKIP
CM SKIP
4
5
6
Recording
Turn the TV on and be sure
to select the input to which
the unit is connected.
SEARCH
MODE
RETURN
Getting started
1
Getting started
Channel setting (cont’d)
Adding/deleting channels
The channels you no longer
receive or seldom watch can be
deleted from the memory.You also
may add channels into memory.
4
Select “Manual Preset” using
K / L buttons, then press
ENTER button.
Manual Preset menu will appear.
1
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
Setup > Channel Preset > Manual Preset
DISPLAY
1
7
Setup > Channel Preset > Manual Preset
CH18
Add
Delete
6
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
VCR
Manual Preset
TV Audio Select
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
The channel number will be
added or deleted from the channel memory.Then, the next channel number will appear so that
you can continue adding or deleting channels.
DVD
Auto Preset
Stereo
PAUSE
STOP
REC/OTR
SETUP
7
Press SETUP button to exit.
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
Setup
3
DVD
VCR
PLAY
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Playback Setting
SLOW
CH2
Add
Delete
Select the channel number to
add or delete.
Press { button to move to a
lower channel number.
Press B button to move to a
higher channel number.
2
CH
VIDEO/TV
0
5
Setup Menu
OPEN/CLOSE
DEF
SPACE
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
20
POWER
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
6
Getting started
Before you start
Selecting the TV stereo or SAP
You can select a sound channel to
output from TV. “Stereo” has
been selected as the default.
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “TV Audio Select”
using K / L buttons, then
press ENTER button.
Option window will appear.
Setup > Channel Preset
VCR
POWER
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DVD
AUDIO
DEF
SPACE
Auto Preset
OPEN/CLOSE
Connections
1
4
CH
VIDEO/TV
SLOW
0
Manual Preset
TV Audio Select
DISPLAY
DVD
VCR
PAUSE
PLAY
1
6
5
Setup Menu
MENU/LIST TOP MENU
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
2
3
4
5
Stereo:
Outputs main-audio.
SAP:
(Secondary Audio Program)
Outputs sub-audio.
Refer to the item in “Glossary”
on page 102 for more information.
Playing discs
Setup
TIMER PROG.
ENTER
REC MONITOR
Editing
6
Playback Setting
Press SETUP button to exit.
3
Notes on TV channel audio
Setup > Channel Preset
VCR
DVD
• When you record a TV program available in second audio or stereo on
a DVD-RW/R or videotape, you have to select either Stereo or SAP in
the Channel Preset screen beforehand. Refer to the following table to
check an appropriate setting.
Selected
audio
Stereo
Auto Preset
Manual Preset
Stereo
SAP
Disc (Videotape)
recording
STEREO
STEREO
MONO
MONO
SAP
STEREO
SAP
MONO
Audio
output
STEREO
STEREO
MONO
MONO
SAP
STEREO
SAP
MONO
VCR functions
TV Audio Select
Broadcast
audio
STEREO+SAP
STEREO
MONO+SAP
MONO
STEREO+SAP
STEREO
MONO+SAP
MONO
Changing the SETUP menu
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Recording
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
SETUP
CLEAR/C.RESET ZOOM
Select “Stereo” or “SAP”
using K / L buttons, then
press ENTER button.
2
STOP
REC/OTR
Getting started
Stereo
Stereo
SAP
21
Others Español
• As can be seen in the above table, when a TV program is available in
second audion and you set Channel Preset to SAP, you can only play
the recording in second audio.
Getting started
Setting the clock
Set the clock before you try the
timer recording. If a Public
Broadcasting Station (PBS) is available
in your area, follow Auto Clock
Setting below. If not, follow Manual
Clock Setting on pages 23-24.
Auto Clock Setting
4
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
Make sure
• The antenna/cable TV connections are correct.
• If this unit is connected to a
Cable Box or Satellite Box, select
the local PBS station on them to
set the clock automatically.
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Setup > Clock
POWER
7
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
VCR DVD
AUDIO
DEF
SPACE
Clock Setting
Auto Clock Setting
Daylight Saving Time
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
OFF
Auto
Auto
Manual
Off
DISPLAY
DVD
VCR
PAUSE
PLAY
1
6
5
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
• If you do not know your
PBS channel number, select
“Auto” using K / L buttons,
then press ENTER button.
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
• If you know your PBS channel number, select “Manual”
using K / L buttons, then
press ENTER button.
Setup Menu
Setup > Clock
Clock Setting
2
Auto Clock Setting
Daylight Saving Time
Select “SETUP” using { / B buttons, then press ENTER button.
SETUP menu will appear.
VCR DVD
OFF
Set Channel
No.
Auto
Auto
CH1
Manual
Off
Setup
Enter your PBS channel
number using Number or K
/ L buttons, then press
ENTER button.
Playback Setting
6
3
Press SETUP button to exit.
Select “Clock” using K / L / { / B
buttons, then press ENTER button.
Clock menu will appear.
Setup > Clock
VCR DVD
Clock Setting
22
Auto Clock Setting
Auto
Daylight Saving Time
ON
7
Press POWER button to turn
off the unit.
This unit will search for the time
only when the power is off. Leave
it off for several minutes to give
this unit time to set the clock on
the display of the front panel.
Note
• The clock may set itself automatically after you connect the
antenna/cable signal to this
unit and plug in the power
cord. In this case, the current
time will appear on the front
panel display.
• If the current time is not displayed or the displayed clock
is not correct, set the clock
manually.
Getting started
Before you start
Setting the clock (cont’d)
Manual Clock Setting
4
1
Select “Clock Setting” using
K / L buttons, then press
ENTER button.
A clock setting window will
appear.
POWER
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DEF
SPACE
Setup > Clock
OPEN/CLOSE
Connections
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
CH
VIDEO/TV
SLOW
0
VCR DVD
DISPLAY
DVD
VCR
PAUSE
Clock Setting
Auto
Daylight Saving Time
ON
---/--/----(---)
--:--
PLAY
1
STOP
REC/OTR
SETUP
Setup Menu
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Press ENTER button again.
Default date will appear.
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
5
Enter the date (month / day /
year) using K / L buttons.
Press { / B buttons to move
the cursor.
Setup > Clock
CM SKIP
SKIP
2
3
4
5
6
Playing discs
Setup
SEARCH
MODE
RETURN
SKIP
VCR DVD
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
12 : 00AM
Playback Setting
Editing
3
VCR DVD
6
Enter the time (hour /
minute) using K / L buttons.
Press { / B buttons to move
the cursor.
Changing the SETUP menu
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
Recording
2
CLEAR/C.RESET ZOOM
Getting started
Auto Clock Setting
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
Setup > Clock
VCR DVD
Clock Setting
Auto
Daylight Saving Time
ON
JAN / 12 / 2004 (MON)
09 : 24 AM
Note
Instructions continue on page 24.
23
Others Español
• Your clock setting will be lost if
either there is a power failure
or this unit has been unplugged
for more than 30 seconds
when you set the clock manually.
VCR functions
Auto Clock Setting
Getting started
Setting the clock (cont’d)
7
Press K / L buttons to select
AM or PM, then press ENTER
button.
Clock menu will appear, then the
settings will be activated.
8
Press SETUP button to exit.
Although seconds are not displayed,
they begin counting from zero.
POWER
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DEF
SPACE
Setup > Clock
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
VCR DVD
DVD
VCR
DISPLAY
PAUSE
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
PLAY
8
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
7
SKIP
CM SKIP
When “Auto Clock Setting” is selected to “Auto” or
“Manual”, change it to “OFF” as following steps.
Repeat steps (1) to (3) in “Manual Clock Setting”.
4
5
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
Option window will appear.
Setup > Clock
Clock Setting
Auto Clock Setting
Daylight Saving Time
24
VCR DVD
OFF
Auto
Auto
Manual
Off
Select “OFF” using K / L
buttons, then press ENTER
button.
6
Press SETUP button to exit.
PLAY
6
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
4
5
Getting started
Before you start
Setting the clock (cont’d)
Setting the daylight saving time
Select “Daylight Saving
Time” using K / L buttons,
then press ENTER button.
Daylight Saving Time options will
appear.
POWER
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DEF
SPACE
Setup > Clock
CH
VIDEO/TV
SLOW
0
VCR DVD
DISPLAY
1
OPEN/CLOSE
Connections
When Daylight Saving Time is
ON, the clock will automatically
move forward one hour on the
first Sunday in April and move
back one hour on the last Sunday
in October.
4
DVD
VCR
PAUSE
Clock Setting
Daylight Saving Time
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Auto
ON
OFF
PLAY
1
6
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
Select “ON” or “OFF” using
K / L buttons, then press
ENTER button.
Choose “ON” when currently
observing the daylight saving time.
Setup Menu
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
CM SKIP
SKIP
SKIP
2
3
4
5
Playing discs
2
SEARCH
MODE
RETURN
6
Press SETUP button to exit.
Editing
Setup
Changing the SETUP menu
Playback Setting
3
VCR functions
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
Recording
5
TIMER PROG.
ENTER
REC MONITOR
Getting started
Auto Clock Setting
VCR DVD
Clock Setting
Auto Clock Setting
Auto
Daylight Saving Time
ON
Others Español
25
Getting started
Selecting the TV aspect ratio
You can select the TV aspect ratio
to match the formats of what you
are playing with the unit and your
TV screen (4:3 standard or 16:9
widescreen TV).
“4:3 Letter Box” has been selected as the default.
4
Select “TV Aspect” using K /
L buttons, then press ENTER
button.
Option window will appear.
Setup > Playback
1
POWER
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DVD
AUDIO
DEF
SPACE
TV Aspect
Parental Lock
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Disc Menu Language
Audio Language
Subtitle Language
16:9 Box
Wide
4:3 Letter
8 & Scan
4:3 Pan
16:9English
Wide
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Refer to the Note on this
page.
DISPLAY
1
6
Select a desired option using
K / L buttons, then press
ENTER button.
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
DVD
VCR
PAUSE
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
5
2
SLOW
PLAY
SEARCH
MODE
Setup Menu
CH
VIDEO/TV
0
Original
OFF
Digital Out
OPEN/CLOSE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
6
Press SETUP button to exit.
Setup
Playback Setting
3
Select “Playback” using K / L
/ { / B buttons, then press
ENTER button.
Playback menu will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
26
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Note
If you have a standard TV:
Select “4:3 Letter Box”, so that
black bars appear on the top
and bottom of the screen.
Select “4:3 Pan & Scan” for a
full height picture with both
sides trimmed.
If you have a widescreen TV:
Select “16:9 Wide”.
Recording
Information
Recording speed
This unit can record to DVD-RW and DVD-R discs.
When recording, you will need to select a recording
format between Video mode and VR mode depending on the disc format.When recording to DVDRW, a recording format will be “Video mode” or
“VR mode” because a disc format is available
between “Video Recording format” and “Video format” for DVD-RW.
On the other hand, the disc format for DVD-R is
always “Video format,” so a recording format will be
“Video mode”.
You can select a recording speed among 6 options,
and the recording time will depend on the recording speed you select as follows.
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB) (for 12cm)
DVD-RW 180 minutes (1.4GB) (for 8cm)
DVD-R
Disc type
Functions
Video mode
Playing, limited recording,
limited editing
Video
DVD-RW
DVD-RW VR mode
VR
DVD-RW
Video mode
DVD-R
DVD-R
Playing, limited recording,
limited editing
360 min
SLP
480 min
SEP
600 min
* This table is designed for a new single-sided 12cm
disc as the standard.The recording time are estimates and actual recording time may differ.
* The audio and video quality is getting poorer as
the recording time becomes longer.
* Discs recorded in SLP or SEP on this recorder
may not be played back on other DVD recorders
or DVD players.
Restrictions on recording
You cannot record copy-protected video using this
unit. Copy-protected video includes DVD-Video discs
and some satellite broadcasts.
If copy-protected material is encountered during a
recording, the unit will pause or stop automatically and
an error message will be displayed on-screen.
Video that is “copy-once only” can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
below).
When recording a TV broadcast or through an external input, you can display copy control information on
screen.
What is “CPRM”?
CPRM is a copy protection system with scramble system regarding the recording of “copy
once” broadcast programs. CPRM stands for
Content Protection for Recordable Media.
This unit is CPRM compatible, which means
that you can record copy-once broadcast programs, but you cannot then make a copy of
those recordings. CPRM recordings can only be
made on DVD-RW discs formatted in VR
mode, and CPRM recordings can only be played
on players that are specifically compatible with
CPRM.
27
Others Español
4.7
Playing, recording,
Original/Playlist editing
EP
VCR functions
Disc format
240 min
Changing the SETUP menu
DVD players with
are capable of playing
DVD-RW recorded in VR mode.
LP
Editing
About Video mode and VR (Video Recording)
mode
Video mode is the same recording format as DVDVideo discs purchased locally, so that you can play in
most DVD players.To play in other DVD players,
you will need to finalize (see page 41). If not finalized, you can play, record additionally or edit discs
recorded in Video mode with this unit.
VR (Video Recording) mode is a basic recording
format for DVD-RW.You can record and edit
repeatedly.
120 min
Playing discs
* This unit cannot record on the following discs.
• DVD-RW Ver 1.2 / 2-4x CPRM compatible
• DVD-R General Ver 2.0 / 8x
SP
Recording
4.7
8cm/12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB) (for 12cm)
180 minutes (1.4GB) (for 8cm)
60 min
Getting started
Attributes
XP
Connections
Logo
Recording Recording
Video/Sound Quality
speed
time *
Before you start
Information on DVD recording
Recording
Information on DVD recording (cont’d)
Information on copy control
Some satellite broadcasts include copy-protected
information. For recording these, refer to the following.
Disc type / format
Making discs playable in other DVD
player (Finalize)
After recording, you must finalize the disc in order
to play on other unites. (Refer to page 41.)
Copy-free Copy-once Copyprohibited
Finalizing*
ver.1.1
DVD-RW
ver.1.1 CPRM compatible
VR
DVD-RW
ver.1.1
ver.1.1 CPRM compatible
DVD-R
ver.2.0
Video
Recordable
Not Recordable
Note
• The audio and video quality is getting poorer as
the Recording time becomes longer.
• This unit cannot record CD-RW or CD-R discs.
• DVD-RW/R and CD-RW/R discs recorded using
a personal computer or a DVD or CD recorder
may not play if the disc is damaged or dirty, or if
there is dirt or condensation on the pickup lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software publisher for more detailed information.)
• Discs recorded in video mode on this DVD
recorder cannot record additionally using other
DVD recorders.
• A DVD-RW disc formatted with this unit cannot
be used in other DVD recorders without any
recording using this unit.
• Since the recording is made by the variable bit
rate (VBR) method, depending on the picture you
are recording, the actual remaining time for
recording may be a little shorter than the
remaining time displayed on the OSD.
28
Playable
This Unit
DVD player
Not Playable
* You cannot finalize discs in other DVD recorders.
After finalizing:
• Once DVD-RW/R (Video mode) is finalized, you
cannot record additionally or edit.
• Even if DVD-RW (VR mode) is finalized, you can
record additionally or edit the disc.
• When DVD-RW/R (Video mode) is finalized, title
menu will be created automatically.
To play in other DVD players, finalize discs
recorded on this unit with the following
condition.
Disc type
Mode
DVD-RW
ver.1.1
ver.1.1 CPRM compatible
Video mode
VR mode
DVD-R
ver.2.0
Video mode
Recording
Before you start
Formatting a disc
Choosing the recording format of a blank disc
Video
VR
DVD-RW
DVD-RW
4
POWER
Select “DVD-RW Recording
Format” using K / L buttons,
then press ENTER button.
Option window will appear.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
Connections
When inserting a blank disc, the unit
starts to initialize the blank disc.
After that, you can record to the disc
with the recording format selected in
SETUP menu.
You are allowed to set a specified
time for chapter marks.
DEF
SPACE
CH
VIDEO/TV
SLOW
0
Setup > Recording
DVD
DISPLAY
DVD
VCR
PAUSE
mode
DVD-RW Recording Format Video
VR mode
VR
mode
Auto Chapter
10 minutes
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
PLAY
Timer Programming
Dubbing Mode
VCR
DVD
Video mode
DVD Player Compatibility mode.
VR mode
Editing possibility mode.
VR mode has been selected as the
default.
1
8
STOP
REC/OTR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
2
3
4
5
6
7
6
Select “Auto Chapter” using
K / L buttons, then press
ENTER button.
Option window will appear.
Playing discs
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
CM SKIP
RETURN
SKIP
Recording
Select “Video mode” or “VR
mode” using K / L buttons,
then press ENTER button.
The recording mode will be set.
2
TIMER PROG.
ENTER
REC MONITOR
5
Setup Menu
SETUP
Getting started
1
Setup
DVD-RW Recording Format
Auto Chapter
Timer Programming
Dubbing Mode
Editing
Setup > Recording
DVD
VR mode
OFF
5 minutes
10
minutes
10 minutes
15 minutes
VCR DVD
30 minutes
60 minutes
Note
3
Setup > Recording
DVD-RW Recording Format
Auto Chapter
DVD
VR mode
10 minutes
Timer Programming
Dubbing Mode
VCR
7
Select a desired time option
using K / L buttons, then
press ENTER button.
Chapter marks will be put as you
specified.
DVD
Press SETUP button to exit.
29
Others Español
8
• When inserting a blank
DVD+RW or DVD+R disc,
the error message ("Disc
Error") will appear.You cannot
record on a DVD+RW/R. On
this unit, DVD+RW and
DVD+R are for playback only.
• PLAYLIST will be created
automatically when recording
on DVD-RW in VR mode.
• The time for chapter marks is
not accurate in Video mode.
• A blank chapter may be created depending on the remaining time of the disc.
VCR functions
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
“10 minutes” has been selected as
the default.
Changing the SETUP menu
Playback Setting
Recording
Formatting a disc (cont’d)
Reformatting a disc
Video
VR
DVD-RW
DVD-RW
If you are using a DVD-RW disc,
by default it will be VR mode.You
can change this to Video mode
from SETUP menu.
1
4
POWER
Select “Yes” using { / B buttons, then press ENTER button.
Option window will appear.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
Disc
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
DISPLAY
DVD
VCR
Edit
Format
PLAY
Finalize
Disc Protect OFF ON
Yes
STOP
No
REC/OTR
1
Are you sure?
Yes
No
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
* VR mode only
CLEAR/C.RESET ZOOM
SEARCH
MODE
5
Select “Yes” using { / B buttons, then press ENTER button.
Formatting will start.
Setup Menu
2
PAUSE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
5
Select “DISC” using { / B buttons, then press ENTER button.
DISC menu will appear.
Disc
Edit
58%
Format
Formatting
Finalize
Disc Protect OFF ON
6
Formatting is complete.
100% will be indicated.
* VR mode only
3
Select “Format” using K / L
buttons, then press ENTER
button.
Option window will appear.
100%
Formatting
Disc
Edit
This operation may take a
while to be completed.
Format
Finalize
Disc Protect OFF ON
Yes
* VR mode only
30
No
Note
• When you reformat the disc,
the contents of the disc will
be erased.
• If you want to cancel format
at step 5, select “No”.
Recording
Before you start
Basic recording
Video
VR
DVD-RW
DVD-RW
DVD-R
DVD
Select a desired channel to
record using CH K / L buttons or number buttons.
POWER
4
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
4
VIDEO/TV
SLOW
0
1
DISPLAY
CH 1
PAUSE
STOP
5
This operation may take a
while to be recognized.
5
PLAY
REC/OTR
SETUP
TIMER PROG.
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
6
ENTER
RETURN
SKIP
SKIP
CM SKIP
Getting started
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
DVD
VCR
Connections
Follow the steps below to record
TV programs.
First:
2
4
5
Select a recording speed
using REC MODE/REC
SPEED button.
Press REC/OTR button to
start recording.
I mark will be displayed for 5
seconds.
Note
SP 2:01 Rem.
This operation may take a
while to be completed.
31
Others Español
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
Press STOP C button to stop
the recording.
VCR functions
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
“VR mode” has been selected as
the default. Refer to “Choosing
the recording format of a blank
disc” on page 29.
6
Changing the SETUP menu
Make sure that the recording
format is set to the desired
mode.
Refer to “Formatting a disc” on
pages 29-30.
Editing
3
To pause the recording, press
PAUSE F button. Press REC/OTR
button to restart the recording.
• Recording starts immediately
and continues until the disc is
full or you stop recording.
• When the clock setting has
not been made, the space for
a date and time of title names
in the original or playlist will
be blank.
• When you record a TV program which has Stereo and
SAP-audio on a DVD-RW/R
(Video mode), you have to
select the TV channel audio
(Stereo or SAP) beforehand.
Only the selected channel audio
will be recorded. Refer to
“Selecting the TV stereo or SAP”
on page 21 for more details.
• You cannot mix two formats
on one DVD-RW disc.
When you load a disc once
recorded before, the recording format cannot be changed
even if you change it in
SETUP menu.
• You cannot change the
recording speed during the
REC pause mode.
• You can change a channel
during the REC pause mode.
Playing discs
I
Refer to “Recording speed” on
page 27.
Recording
2
Recording
Basic recording (cont’d)
Checking the recording picture quality
Video
VR
DVD-RW
DVD-RW
DVD-R
You can confirm the recording picture quality with the recording
speed you have selected before
attempting to record to a DVD disc.
First:
2
1
Press REC MONITOR button
again to exit.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
POWER
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DVD
DISPLAY
1
DVD
VCR
PAUSE
PLAY
STOP
While the unit is in STOP or
REC with a DVD disc to
record inserted, press REC
MONITOR button.
The TV program will be on the
screen in the recording picture
quality with the recording speed
you have selected.
REC/OTR
1
2
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
SKIP
CM SKIP
CH 18
Rec Monitor
XP
If you want to change the
recording speed, press REC
MODE/REC SPEED button
repeatedly.
The recording speed will be
changed as you press the button
as shown. Refer to “Recording
speed” on page 27.
• You cannot change the recording speed during recording.
XP
SP
LP
SEP
SLP
EP
Note
• You cannot check the recording sound quality with the
Rec monitor function.
32
Recording
Before you start
One-touch timer recording
Video
VR
DVD-RW
DVD-RW
DVD-R
1
2
POWER
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
5
AUDIO
OPEN/CLOSE
DEF
SPACE
CH
4
VIDEO/TV
SLOW
0
Press REC/OTR button, then
press REC/OTR button
repeatedly until a desired
recording time (30 minutes
to 8 hours) appears on the TV
screen.
Recording will start.
DISPLAY
DVD
VCR
PAUSE
PLAY
STOP
5
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
5
RETURN
SKIP
SKIP
CM SKIP
Recording
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
Select a desired channel to
record using CH K / L buttons or number buttons.
This operation may take a
while to be recognized.
Select a recording speed
using REC MODE/REC
SPEED button.
Refer to "Recording speed" on
page 27.
8:00
7:30
When the unit reaches the specified time, it will turn off automatically.
To change the recording length
during the one-touch timer
recording, press REC/OTR repeatedly untill the desired length
appear.
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
This operation may take a
while to be completed.
Note
• The remaining recording time
will appear on the display panel
during an one-touch timer
recording. Press DISPLAY button to see it on the TV screen.
• You cannot pause a one-touch
timer recording.
• Unlike a timer recording, you
can perform the following
operations during a one-touch
timer recording.
- Turning the power off
- Using REC, STOP C, or
RETURN buttons.
• The unit will be turned off
automatically under the following conditions.
1)No space remained on the disc.
2)When a power failure occurs.
• If OTR is finished in DVD during playback or REC mode in
VCR, the DVD will be in STOP
mode and the VCR keeps the
current mode.
33
Others Español
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
(Normal Recording) 1:00
VCR functions
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
"VR mode" has been selected as
the default. Refer to page 29
"Choosing the recording format
of a blank disc."
0:30
Changing the SETUP menu
Make sure that the recording
format is set to the desired
mode.
Refer to "Formatting a disc" on
pages 29-30.
0:30
Editing
3
I
Playing discs
2
Getting started
DVD
4
Connections
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby.
First:
Recording
Timer recording
Video
VR
DVD-RW
DVD-RW
DVD-R
VCR
You can program the unit to record
up to 8 programs, up to a year in
advance. Daily or weekly program
recordings are also available.
• Be sure to set the clock before
making a timer programming.
• Insert a recordable disc or a
videotape with a record tab.
4
Select “Timer Programming”
using K / L buttons, then
press ENTER button.
Timer Programming list will
appear.
You can choose the timer
programming menu by pressing TIMER PROG. button. In
this case, continue with step 5.
POWER
Setup > Recording > Timer Programming
Date
-------
1
Start
End
CH
DVD
VCR
Speed
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
5
VCR
DVD
PLAY
Select the program which is
not set up using K / L buttons, then press ENTER button.
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
6
SEARCH
MODE
RETURN
SKIP
CM SKIP
Enter the date using K / L
buttons, then press B button.
Setup Menu
Setup > Recording > Timer Programming
2
DVD
Date
Start
End
CH VCR
Speed
JAN / 01 - - : - -AM - - : - -AM CH8 DVD
-------
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
PAUSE
SKIP
2
3
4
5
6
7
e.g. January 1st
JAN/01
L
Daily
Setup
L
When pressing L button at the
current date, timer recording
mode will change as follows.
MON-SAT
L
MON-FRI
L
SAT
L
Playback Setting
L
3
FRI
Note
L
SUN
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
Setup > Recording
DVD-RW Recording Format
Auto Chapter
DVD
VR mode
10 minutes
Timer Programming
Dubbing Mode
VCR
DVD
L
DEC/31
7
Enter the time to start and
to end using K / L buttons,
then press B button.
Setup > Recording > Timer Programming
DVD
Date
Start
End
CH VCR
Speed
JAN/12 10 :00PM - - : - -AM CH8 DVD
-----
34
• If you have not set the
clock yet:
A clock setting window will
appear after step 4. Continue
with the step 4 in “Auto
Clock Setting” on page 22 or
“Manual Clock Setting” on
page 23 before making a
timer programming.
• Press { or B buttons to
move the cursor to the left
and the right in the timer
programming menu.
Recording
Before you start
Timer recording (cont’d)
8
10
Select the channel number to
Select a recording speed
using K / L buttons.
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD
To record from external input, L1
or L2.
using K / L buttons, then
press B button.
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
DVD
End
CH VCR
Speed
10:30PM CH8 DVD XP
SPACE
PAUSE
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
SKIP
CM SKIP
8
9
10
11
Note
• After step 12, the unit will be
turned on automatically 2
minutes (For VCR recording,
10 seconds) in advance of the
recording time to start and
waits to start.Then the
recording will start at the
recording time you set.
Checking, canceling, or correcting the timer programming
information
POWER
4
Press POWER button so that
indicator disappears from
the front display.
To clear the timer programming,
select your desired program
using K / L buttons, then press
CLEAR/C.RESET button.
2
Setup > Recording > Timer Programming
Date
Start
JAN/12 10:00PM
---
DVD
End
CH VCR
Speed
10:30PM CH8 DVD XP
3
5
Press TIMER PROG. button to exit.
6
Press POWER button to return
to the timer standby mode.
Press STOP C button to stop the disc recording or STOP/EJECT C
A to stop the videotape recording on the front panel of the main
unit. STOP C button on the remote control is not effective.
2
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
4
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
2
5
4
SKIP
CM SKIP
Note
• Press TIMER PROG. button to
check the timer programming
in process.
When the timer recording is
in process, that program will
be red highlighted. In this case,
you cannot select any other
program.
35
Others Español
To stop the timer recording in process
ABC
GHI
VCR functions
Check the information on the
list you will need.
To correct the timer programming, select your desired program using K / L buttons, then
press ENTER button.
Next, correct the timer programming
using K/L/{/B buttons.
Finally, press ENTER button again.
.@/:
1
OPEN/CLOSE
Changing the SETUP menu
Press TIMER PROG. button.
Timer Programming list will appear.
1
6
AUDIO
Editing
1
REC MODE
REC SPEED
Playing discs
Press POWER button to turn off.
indicator will appear on the
front display.
SLOW
DVD
PLAY
11
12
VIDEO/TV
0
VCR
DISPLAY
Refer to “Recording speed” on page
27 for DVD or page 94 for VCR.
Press ENTER button when all
information required is
entered.
Your program setting will be
stored.
• To set another program, repeat
steps 5 to 11.
• To exit, press SETUP button.
CH
Recording
• To record on to a videotape, select
VCR.
• To record on to a disc, select DVD.
.@/:
1
OPEN/CLOSE
Getting started
9
Select a recording media
12
AUDIO
Connections
record using K / L buttons,
then press B button.
REC MODE
REC SPEED
POWER
Recording
Timer recording (cont’d)
Hints for timer recording
• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
• If a disc is not on the tray, the DVD indicator on the front panel flashes and timer recording cannot be performed.
Please insert a recordable disc.
• If a videotape with a record tab is not in the cassette compartment, the VCR indicator on the front panel flashes and
timer recording cannot be performed. Please insert a recordable videotape.
• When all the timer recording is completed, the
indicator flashes.To play or eject the recorded disc (or the videotape), press POWER button first and then press PLAY B or OPEN/CLOSE A (or STOP/EJECT C A) button.
• The timer recording is not performed in DVD and VCR at the same time. If you set two programmings with the same
channel and time both in DVD and VCR, the programming that has priority will be recorded.
indicator is on the front display), any operations on the unit will not be
• During timer recording or timer standby (
available.To make these operations available, cancel the timer recording or timer standby first (
indicator disappears).
• To cancel the timer standby mode, press POWER button.
• When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc
reaches at the end during the recording, the unit turns itself off.
• When the programmed Start and End time are earlier than the current time, the recording will be set on the same date in the next year.
• If your programmed Start time for DVD recording is within 2 minutes from the current time, the power will turn on for recording
standby right after you turn the power off. For a videotape recording, the power will turn on shortly before the Start time.
• If a videotape ends during timer recording, the unit will stop, eject the videotape, and turn itself off.
• When two or more programs are overlapped, “Overlap” will appear in the display.
• If the Start time is earlier and the End time is later than the current time, the recording will start right after you turn the power off.
The priority of overlapped settings
This unit records the programs according to priority if the timer programmings are overlapped.The timer programming
set previously has priority.
A timer recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
A programming set previously has priority
When the starting time is the same:
A program set previously (PROG. 1) has priority.
When some programming have been
made at the end time of the
programming currently being recorded:
A program set previously (PROG. 2) has priority.
ex. 2
ex.1
PROG. 1
PROG. 1
PROG. 2
PROG. 2
PROG. 3
Actual
PROG. 1
PROG. 2
recording
The first 30 seconds (at the longest) will be cut off
Actual
PROG. 1
PROG. 2
recording
The first 30 seconds (at the longest) will be cut off
When the recording time is partially overlapped:
PROG. 1 will start after PROG. 2 is complete to be recorded.
However, PROG. 1 will be recorded if you turn the power off for timer standby within 2 minutes
to the Start time for PROG. 1.
PROG. 1
Note
PROG. 2
Actual
PROG. 2
PROG. 1
recording
The first 30 seconds (at the longest) will be cut off
When the recording time is entirely overlapped:
However, if you turn the power off for timer standby within 2 minutes to
the Start time for PROG. 1, PROG. 1 will be recorded first, and the
recording of PROG. 2 will start after the recording of PROG. 1 is completed.
PROG. 1
• When the recording time of
two programs are overlapped,
or the End time of a program
and the Start time of another
is the same, the first 30 seconds (at the longest) of the
subsequent program will be
cut off.
PROG. 2
Actual
recording
PROG. 2
When the End time of the programming currently being recorded and the Start time
of the subsequent program are same:
If PROG. 1 is a DVD recording program, the beginning of the PROG. 2 may be cut off.
The amount of time cut off differs depending on the recorded media.
For example, if both PROG. 1 and PROG. 2 are DVD recordings, the first 30 seconds (at the longest) will be cut off PROG.
PROG. 1
PROG. 2
Actual
recording
PROG. 1
PROG. 2
The first 30 seconds (at the longest) will be cut off.
36
Recording
Connection to an external source
Video
VR
DVD-RW
DVD-RW
DVD-R
VCR
OUTPUT
S- VIDEO
L
OUTPUT
Another source
(VCR camcorder etc.)
VIDEO AUDIO
R
S- VIDEO
VIDEO AUDIO
L
R
Getting started
or
or
S-Video
cable
Video
cable
S-Video
cable
Audio
cable
Connections
Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear).
When you record on a videotape, use either the DVD/VCR VIDEO IN jack (Rear) or VIDEO IN jack (Front).
S-VIDEO input is useful only in DVD mode.
When connecting an external equipment of monaural output to this unit, use AUDIO L jack of LINE 1
(Rear) or LINE 2 (Front).
Use commercially available S-Video or Video cable and an Audio cable for this connection.
Before you start
Settings for an external source
Video
cable
Audio
cable
DVD
S-VIDEO
DVD/VCR
AUDIO IN
L
S-INPUT
VIDEO L(MONO) - AUDIO - R
To LINE 2 IN
R
IN
VIDEO IN
Recording
or
To LINE 1 IN
OPEN/CLOSE
DVD
S-VIDEO
DIGITAL
AUDIO
AUDIO OUT OUT
COMPONENT
VIDEO OUT
Y
POWER
STOP/EJECT
REW
F.FWD
PLAY
VCR
DVD
STOP
PLAY
L
COAXIAL
REC/OTR
REC/OTR
R
CHANNEL
(TRACKING)
DUBBING
OUTPUT SELECT
DVD/VCR
AUDIO IN AUDIO OUT ANTENNA
IN
L
L
R
R
VIDEO IN VIDEO OUT
OUT
PR/CR
OUT
Front of this unit
DVD
Rear of this unit
1. Press SETUP button to display SETUP/DISC menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “Select Video” using K / L / { / B
buttons, then press ENTER button.
Setup > Select Video
DVD
L1 (Rear)
Video In
L1 (Rear)
Video In
L2 (Front)
Video In
L2 (Front)
Video In
L1 (Rear)
L2 (Front)
DVD
Video
Video
In In
S-Video
Video In
Setup > Select Video
DVD
L1 (Rear)
L2 (Front)
DVD
Video
Video
In In
S-Video
Video In
5. Select the input jack type to connect using
K / L buttons, then press ENTER button.
If you want to use S-VIDEO INPUT, select “S-Video In”.
If you want to use VIDEO INPUT (Composite),
select “Video In”.
Setup > Select Video
DVD
L1 (Rear)
Video In
L1 (Rear)
S-Video In
L2 (Front)
S-Video In
L2 (Front)
Video In
Others Español
37
VCR functions
5. Select the input jack type to connect using
K / L buttons, then press ENTER button.
If you want to use S-VIDEO INPUT, select “S-Video In”.
If you want to use VIDEO INPUT (Composite),
select “Video In”.
Setup > Select Video
Changing the SETUP menu
Setup > Select Video
4. Select “L1 (Rear)” using K / L buttons, then
press ENTER button.
Editing
4. Select “L2 (Front)” using K / L buttons,
then press ENTER button.
Playing discs
1. Press SETUP button to display SETUP/DISC menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “Select Video” using K / L / { / B
buttons, then press ENTER button.
Setup > Select Video
PB/CB
IN
Recording
Settings for an external source (cont’d)
Recording from an external source
Video
VR
DVD-RW
DVD-RW
DVD-R
VCR
Before recording from an external source, see the instructions for the connection on page 37.
1. Turn the TV and the unit on, and be sure to select the input
of the TV to which the unit is connected.
DVD
5
1
2. When you want to record to the disc: Press:
Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
POWER
REC MODE
REC SPEED
AUDIO
ABC
DEF
2
3
.@/:
1
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
OPEN/CLOSE
CH
VIDEO/TV
SLOW
0
DISPLAY
This operation may take a while to be recognized.
3. Press OPEN/CLOSE A button to close the disc tray.
When you want to record to a videotape: Press:
Insert the videotape with a record tab into the cassette
compartment.
4. Select the input of the unit which the external equipment is
connected. (L2 or L1)
•To use the input jacks on the back of this unit, select “L1” position by
pressing [0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select “L2” position
by pressing [0],[0],[2] on the remote control or the CH K / L buttons.
5. Select a recording speed using REC MODE/REC SPEED button. Refer to “Recording speed” on page 27 for DVD or page 94 for
VCR.
SP
LP
SP
SEP
SLP
DVD mode
SLP
EP
VCR mode
6. Press REC/OTR button on the unit to start recording.
7. Press PLAY button on the external source to record from.
8. For disc:
Press STOP C button on the unit to stop recording.
This operation may take a while to be completed.
For videotape:
Press STOP/EJECT C A button on the unit to stop recording.
38
4
PAUSE
PLAY
VCR
XP
DVD
VCR
2
3
STOP
6
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
8
Recording
Before you start
Dubbing Mode
Video
VR
DVD-RW
DVD-RW
DVD-R
VCR
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
1
STOP
REC/OTR
SETUP
3
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Setup > Recording
DVD-RW Recording Format
Auto Chapter
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
SKIP
SKIP
2
3
4
DVD
VR mode
10 minutes
VCR
Playing discs
Timer Programming
Dubbing Mode
DVD
1
4
Editing
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Select “Dubbing Mode” using
K / L buttons, then press
ENTER button.
Option window will appear.
DVD-RW Recording Format
Auto Chapter
VCR
DVD
Video mode
OFF
Timer Programming
Setup Menu
Dubbing Mode
VCR
DVD
39
Others Español
Instructions continue on page 40.
VCR functions
For VCR to DVD duplication:
• After starting VCR to DVD
duplication, the picture may be
distorted because of the auto
tracking function.
This is not a malfunction. Be
advised to playback the videotape until the picture is stabilized, then set the starting
point which you wish to start
recording, and start VCR to
DVD duplication.
Changing the SETUP menu
Note
Setup > Recording
Recording
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
RETURN
Getting started
PLAY
Playback Setting
Make sure:
• Insert a recordable disc and a
videotape with a record tab.
Note for recording to a
videotape:
• The videotape's record tab is
intact.
• The remaining time of the videotape is long enough.
Note for recording to a disc:
• Make sure that the disc is
recordable. Refer to pages 27
and 28.
POWER
Connections
You can copy a DVD disc to a
videotape or copy a videotape to a
DVD disc.This function will be possible only if the DVD disc or the
videotape is not copy protected.
Before starting this function, prepare for the recording on the DVDRW/R disc or the videotape. Refer
to pages 31-32, 94.
2
Recording
Dubbing Mode (cont’d)
VCR to DVD
DVD to VCR
5-a
Select “VCR ⇒ DVD” using K
/ L buttons, then press
ENTER button.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
POWER
5-b
Select “VCR ⇐ DVD” using K
/ L buttons, then press
ENTER button.
SPACE
OPEN/CLOSE
7-a
7-b
CH
VIDEO/TV
SLOW
0
VCR
DISPLAY
Setup > Recording
DVD-RW Recording Format
Auto Chapter
VCR
DVD
Video mode
OFF
Timer Programming
Dubbing Mode
Setup > Recording
DVD-RW Recording Format
Auto Chapter
VCR
Dubbing Mode
VCR
VCR DVD
DVD
VCR DVD
6-a
6-b
STOP
REC/OTR
SETUP
6-b
Press SETUP button to exit
SETUP menu.
Make sure to select a recording
speed using REC MODE/REC
SPEED button.
Press:
Press SETUP button to exit
SETUP menu.
Press:
7-a
Press PLAY B button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
• Since it takes about a few seconds before the actual dubbing
begins, please allow extra 5 seconds when selecting the starting
point.
8-a
Press DUBBING button on
the front of the unit.
VCR to DVD duplication will start.
9-a
Press STOP C button on the
unit or STOP C button on
the remote control to stop
the recording.
40
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
SEARCH
MODE
6-a
9-a
9-b
PLAY
CLEAR/C.RESET ZOOM
VCR
PAUSE
DVD
Video mode
OFF
Timer Programming
VCR
VCR DVD
DVD
VCR DVD
DVD
5-a
5-b
RETURN
SKIP
SKIP
CM SKIP
VCR
Make sure to select a recording
speed using REC MODE/REC
SPEED button.
Press:
7-a
9-a
DVD
OPEN/CLOSE
STOP/EJECT
POWER
REW
F.FWD
PLAY
7-b
Press PLAY B button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
VCR
DVD
STOP
PLAY
REC/OTR
REC/OTR
CHANNEL
(TRACKING)
9-b
DUBBING
OUTPUT SELECT
8-a 7-b
8-b
Note
8-b
Press DUBBING button on
the front of the unit.
DVD to VCR duplication will start.
9-b
Press STOP/EJECT C A button on the unit or STOP C
button on the remote control
to stop the recording.
• When you turn off the unit
after setting the Dubbing
Mode to
, the
setting will be set to
automatically.
• Dubbing Mode is available
only if the videotape or disc is
not copy protected.
• You cannot change the output
mode during VCR to DVD or
DVD to VCR duplication.
For VCR to DVD duplication:
• The playback sound mode is
followed by the setting of
VCR playback sound mode on
page 96. Set the playback
sound mode to which you
wish to record to the DVD.
Recording
Before you start
Finalizing the discs
Video
VR
DVD-RW
DVD-RW
DVD-R
POWER
1
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
Connections
You will need to finalize the discs
recorded in Video mode to play in
other DVD players.
tons, then press ENTER button.
Finalizing will start.
CH
VIDEO/TV
SLOW
0
DISPLAY
58%
STOP
To cancel finalizing...
Disc
Edit
Format
Finalize
Disc Protect OFF ON
Finalizing is complete.
* VR mode only
Select “Finalize” using K / L
buttons, then press ENTER
button.
Option window will appear.
100%
Finalizing
Disc
This operation may take a
while to be completed.
Format
Finalize
Disc Protect OFF ON
Yes
No
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
Note
• Finalizing discs in Video mode
automatically creates title
menus.
• Once you have finalized a disc
recorded in Video mode, you
cannot edit or record anything else on that disc.
Discs recorded in VR mode
can still be recorded and edited on this unit even after
being finalized.
• When you insert a DVD-RW
disc finalized with this unit,
“Undo Finalize” will appear
instead of “Finalize”.
Disc
Edit
VCR functions
Edit
MENU/LIST TOP MENU
Changing the SETUP menu
3
ENTER
REC MONITOR
4
2
3
4
Editing
5
1
TIMER PROG.
Playing discs
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
• To cancel finalizing at step 4,
press STOP C button, select
“YES”, then press ENTER
button. Finalizing is cancelled
and the DVD recorder will
be in stop mode.
• If
appear when pressing
STOP button, you cannot
cancel finalizing because the
finalizing has been in certain
progress.
• When selecting “No”, press
ENTER or RETURN button,
finalizing will be continued.
• You cannot cancel finalizing
the DVD-R disc when it has
been started.
SETUP
Recording
2
PAUSE
PLAY
Finalizing
REC/OTR
Setup Menu
DVD
VCR
Getting started
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Format
4
Select “Yes” using { / B but-
To release the finalizing for
the disc, select “Undo
Finalize” at step 3.
41
Others Español
Undo Finalize
* VR mode only
Recording
Setting a disc to protect
VR
DVD-RW
To prevent accidental recording,
editing, or erasing the titles, you
can protect them from DISC
menu.
3
Select “Disc Protect OFF ➔
ON” using K / L buttons,
then press ENTER button.
Option window will appear.
POWER
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
SPACE
DISPLAY
SLOW
DVD
VCR
PAUSE
Edit
Format
Finalize
PLAY
Disc Protect OFF
ON
STOP
Yes
No
REC/OTR
1
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
4
Setup Menu
CH
VIDEO/TV
0
Disc
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
OPEN/CLOSE
DEF
PQRS
7
1
AUDIO
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
Select “Yes” using { / B buttons, then press ENTER button.
A disc will be protected.
2
3
4
2
Select “DISC” using { / B
buttons, then press ENTER
button.
DISC menu will appear.
58%
Disc
Writing to Disc
Edit
Format
Finalize
Disc Protect OFF ON
This operation may take a
while to be completed.
Note
• The Disc Protect setting is
available only when a disc
with VR mode is inserted.
To cancel the disc protect:
• When you insert a disc protected with this unit, “Disc
Protect ON → OFF” will
appear instead of “OFF →
ON”.
Disc
Edit
Format
Finalize
Disc Protect ON
Yes
OFF
No
To release the protect for the
disc, select “Disc Protect ON
→ OFF” at step 3, then select
“Yes”.
42
Playing discs
Before you attempt to play DVD discs, read the following information.
Color systems
This unit is compatible to play the following discs.
To play a DVD, make sure that it meets the requirements
for Region Codes and Color Systems as described below.
Discs that have the following logos will play on the unit.
Other Disc types are not guaranteed to play.
DVDs are recorded in different color systems
throughout the world.The most common color system is NTSC (which is used primarily in the United
States and Canada).
This unit uses NTSC, so DVDs you play must be
recorded in the NTSC system.You cannot play
DVDs recorded in other color systems.
Disc
Logo
DVD VIDEO
DVD-R (VIDEO mode)
DVD+RW (VIDEO mode)
DVD+R (VIDEO mode)
CD-RW (CD-DA FORMAT, MP3 files)
Hint for DVD playback
The contents of DVD disc are generally divided into
titles.Titles may be further subdivided into chapters.
CD-R (CD-DA FORMAT, MP3 files)
Start Rec.
Title 1
Stop Rec.
Editing
Title 2
Changing the SETUP menu
Note:
The following discs can be played on this unit but
their performance is not guaranteed :
• DVD-RW Ver 1.2 / 2-4x CPRM compatible
• DVD-R General Ver 2.0 / 8x
Stop/Start
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Guide to displays
First:
1. Indicates a disc type and a
format mode.
DVD
4
1
00:00:00
3. Indicates a current channel
number and an audio status of
the program.
:Audio
: Subtitle
:Angle (except VR mode)
: Repeat
: Marker
DVD-RW
Video mode
SP 1:25 Rem.
5
: Search
CH 1
STEREO
2
3
4. Indicates a title number, chapter number, and the time
elapsed of disc play.
: Noise Reduction
: Zoom
43
Others Español
1
1
2. Indicates a recording speed
and possible recording time.
5. Each icon means:
VCR functions
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
Playing discs
The number inside the globe refers to region of the
world.
A DVD labeled for a specific region can only play on
the unit with the same region code.
CD-DA (AUDIO CD)
Recording
This unit has been designed to play DVD discs with
Region One (1). DVDs must be labeled for ALL
regions or for Region 1 in order to play on this unit.
You cannot play DVDs that are labeled for other
regions. Look for the symbols below on your DVDs.
If these region symbols do not appear on your
DVD, you cannot play that DVD in this unit.
DVD-RW (VIDEO/VR mode)
Getting started
Region codes
Connections
Playable discs
Before you start
Information on DVD play
Playing discs
Basic playback
Playback
Video
VR
DVD-RW
DVD-RW
DVD-R
Video
DVD+RW
DVD+R
1
Press POWER button, then
press DVD button.
When you are playing a DVD, turn
the TV on and be sure to select the
input to which the unit is connected.
5
Press TOP MENU button to
display the title menu.
You can change “Original” or
“Playlist” of VR mode using
MENU / LIST button.
Video mode:
POWER
1
REC MODE
REC SPEED
AUDIO
ABC
DEF
2
3
.@/:
1
GHI
JKL
5
6
TUV
WXYZ
8
9
2
4
0
Press OPEN/CLOSE A button to open the disc tray.
The disc tray will open.
DVD
VCR
DISPLAY
7
3
JAN/1 1:00AM
PAUSE
STOP
REC/OTR
SETUP
TIMER PROG.
JAN/1 2:00AM
JAN/1 4:00AM
ENTER
REC MONITOR
5
5
5
JAN/1 3:00AM
SLOW
2
4
7
PLAY
1
2
JAN/1 12:00AM
VIDEO/TV
SPACE
Title List
1
CH
MNO
4
PQRS
7
OPEN/CLOSE
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
6
SKIP
CM SKIP
VR mode:
Original
3
1
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
JAN/1 12:00AM
4
JAN/1 3:00AM
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
5
JAN/1 4:00AM
MENU / LIST button
Playlist
disc
tray
guide
1
Press OPEN/CLOSE A button to close the disc tray.
3
JAN/1 1:00AM
JAN/1 2:00AM
Note
JAN/1 12:00AM
4
This operation may take a
while to be recognized.
4
1
2
JAN/1 3:00AM
5
JAN/1 4:00AM
6
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playback will start.
• For DVD-R (Video mode)
and DVD-RW (Video mode)
discs which are already finalized, a title list will be displayed instead of thumbnails.
Title Menu
1 JAN/1
12:24AM
CH96
XP
2
3
4
5
6
7
8
7
Press STOP C button to stop
playback.
To eject the disc, press
OPEN/CLOSE A button to open
the disc tray, then remove the disc
before turning off the unit.
44
• You can resume play from
where you stopped playing
the disc. (Resume play)
Refer to page 48 for details
about resume play.
• Some discs may start playing
automatically.
Playing discs
DVD-V
CD
MP3
1
Press POWER button, then
ton to open the disc tray.
The disc tray will open.
POWER
1
REC MODE
REC SPEED
AUDIO
ABC
DEF
2
3
.@/:
1
GHI
If you are playing a DVD-Video
disc, a menu may appear.
Refer to pages 46-47 for details
about a disc menu.
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
SPACE
OPEN/CLOSE
2
CH
VIDEO/TV
SLOW
0
DVD
VCR
DISPLAY
PAUSE
PLAY
5
Press STOP C button to stop
STOP
REC/OTR
playing.
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
3
Place the disc onto the disc
SEARCH
MODE
SKIP
SKIP
CM SKIP
Note
• Some discs may start playing
automatically.
Playing discs
For MP3 playback
1
In stop mode, press TOP MENU
button to call up the MP3 menu.
DISC NAME
1/ 2
• To exit the menu, press TOP
MENU button again.
desired folder (group) or track,
then press ENTER button.
When selecting track:
Playback will start.
This unit recommends the files
recorded under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz.
• Constant bit rate: 112kbps - 320kbps.
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
1
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
2
2
2
CM SKIP
Note
• The audio source of MP3 files
cannot be recorded as digital
sound by an MD or DAT deck.
• Files whole extension other
than “.mp3 (MP3)” will not be
listed in the MP3 menu.
• Some unplayable folders or
tracks may be listed in the
MP3 menu due to the
recording status.
45
Others Español
When selecting the folder:
The files in the folder will appear.
Press K or L button to select the
track or folder you want, then
press ENTER button.
AUDIO
VCR functions
2
Press K / L buttons to select a
Hints for MP3 files:
• Folders are known as Groups,
files are known as Tracks.
• Folders are accompanied by
icon.
• MP3 files are accompanied by icon.
Reproduction will start from the
selected track and go to the
next one in turn.
• The system can recognize up to 255
groups (or folders) and up to 255 tracks.
• The name of the group and track
can be displayed in up to 32 characters. Unrecognizable characters
will be replaced with asterisks.
• If there are no files in the folder,
“No Files” will be displayed.
REC MODE
REC SPEED
Changing the SETUP menu
FOLDER NAME 1
FOLDER NAME 2
FOLDER NAME 3
FOLDER NAME 4
FOLDER NAME 5
FOLDER NAME 6
1 FILE NAME 1
2 FILE NAME 2
POWER
Editing
List of MP3 Files
• Press PLAY B, ENTER or B button to move to the lower hierarchies.
• Press s button or RETURN
button to go to the previous
hierarchy.
• Press STOP C button to return
to the first item.
Recording
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
4
5
Getting started
2
Press OPEN/CLOSE A but-
playing.
Playback will start.
Connections
press DVD button.
When you are playing a DVD or
an audio CD, turn the TV on and
be sure to select the input to
which the unit is connected.
4
Press PLAY B button to start
Before you start
Basic playback (cont’d)
Playing discs
Basic playback (cont’d)
Playing discs using the disc menu
DVD-V
A DVD disc contains a disc menu
that describes the contents or
allows you to customize the playback. For example, the menu may
offer choices for subtitle languages, special features, or chapter
selection.
Sometimes these are displayed
automatically when you start playback, otherwise only appear when
you press MENU / LIST button.
First:
DVD
1
Press MENU / LIST button.
The DVD main menu will appear.
If the feature is not available,
may appear on the TV screen.
2
Select an item using K / L /
{ / B buttons, then press
ENTER button to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
MENU / LIST button:
Displays a DVD disc menu which
varies with the disc and may be
the same as the ‘Title menu.’
K / L / { / B buttons:
Moves the cursor around screen.
POWER
2
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
2
3
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
Enter button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). Press ENTER
button after.
3
Press MENU / LIST button to
exit the menu.
Note
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
46
2
Playing discs
Before you start
Basic playback (cont’d)
Playing discs using the title menu
DVD-V
DVD
Press TOP MENU button.
The title menu will appear.
If the feature is not available,
may appear on the TV screen.
Select a title to play using the
K / L / { / B buttons, then
press ENTER button.
Playback will begin at the title you
selected.
POWER
2
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
TOP MENU button:
Displays the ‘Title menu’ of a
DVD disc which varies with the
disc.
DVD
VCR
PLAY
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
2
SKIP
CM SKIP
Recording
Enter button:
Selects the current highlighted
menu option.
1
2
3
TIMER PROG.
ENTER
REC MONITOR
K / L / { / B buttons:
Moves the cursor around screen.
PAUSE
Getting started
1
2
Connections
Some DVDs have a title menu,
which lists the titles available on
them. It helps you to start playback at a specific title.
First:
Playing discs
Number buttons:
Selects a numbered menu option
(some discs only). Press ENTER
button after.
3
Press TOP MENU button to
exit the title menu.
Editing
Changing the SETUP menu
VCR functions
Note
47
Others Español
• The TOP MENU button will
not always be active with all
DVDs.
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
Playing discs
Special playback
Resume play
Video
VR
DVD-V
DVD-RW
DVD-RW
DVD-R
DVD+RW
2
Video
CD
DVD+R
Press PLAY B button.
In a few seconds, playback will
resume from the point at which it
stopped last.You can resume play
at the same point even if you turn
off the unit.
MP3
You can resume play from where
you stopped playing the disc last.
1
REC MODE
REC SPEED
POWER
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DVD
VCR
DISPLAY
PAUSE
PLAY
To cancel the resume play and
start playing the disc from the
beginning, press STOP C button
the second time while the playback is stopped.
During playback, press STOP
C button.
The resume message will appear.
Screen:
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
2
1
2
SKIP
SKIP
CM SKIP
Note
• For MP3 files, playback will
resume from the beginning of
the track at which playback
was stopped.
Resume ON
Fast forward / Fast reverse
DVD-V
Video
VR
DVD-RW
DVD-RW
Video
DVD-R
DVD+RW
DVD+R
POWER
CD
1
g
g
x40
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
During playback, press D or E button.
Every time you press D or E button, approximate speed will be
changed as follows. For DVD discs, sound will be output during fast forward in x2 only if you set “Fast Forward with Audio” to “ON” for the
“Playback” setting in the SETUP menu.
Fast forward or fast reverse playback across titles (for DVD discs) or
tracks (for MP3) is not possible.
h
x20
h
g
x5
h
Normal
speed
playback
g
h
g
OPEN/CLOSE
x2
h
x20
h
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
STOP
REC/OTR
REC MONITOR
SETUP
TIMER PROG.
1
1
ENTER
Note
g
For Audio CDs, approximate speed is fixed at x8 with sound.
For MP3 files, approximate speed is fixed at x16.
To return to the normal playback, press PLAY B button.
48
REC MODE
REC SPEED
MP3
x40
• Forward/reverse speed will be
indicated with icons as follows.
Forward (Approx. Speed)
x2:
x20:
x40:
Reverse (Approx. Speed)
x5:
x20:
x40:
Playing discs
Before you start
Special playback (cont’d)
Skipping TV commercials during play
Video
VR
DVD-RW
DVD-RW
DVD-R
e.g. Press CM SKIP button once
SPACE
SLOW
0
Video
DVD+R
DVD+RW
PLAY
STOP
REC/OTR
CM Skip
30 sec.
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
1
CLEAR/C.RESET ZOOM
(forwarding 30 seconds.)
SEARCH
MODE
RETURN
SKIP
SKIP
Getting started
CM SKIP
1
Recording
During playback, press CM
SKIP button.
Normal playback will start at 30
seconds ahead from the point you
press CM SKIP button.
Every time you press CM SKIP
button, the searching point will be
extended by 30 seconds ahead.
You can press up to 6 times (180
seconds).
PAUSE
Connections
You can skip TV commercials by
pressing CM SKIP button, so that
you can enjoy the recorded programs without interrupting.
DVD
VCR
DISPLAY
B
Playback will restart automatically.
Video
VR
DVD-V
DVD-RW
DVD-RW
DVD-R
DVD+RW
Video
CD
DVD+R
MP3
2
Press PLAY B button to
resume play.
POWER
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
2
DVD
VCR
PAUSE
1
Editing
1
REC MODE
REC SPEED
Playing discs
Pause
PLAY
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
Changing the SETUP menu
STOP
REC/OTR
RETURN
SKIP
SKIP
CM SKIP
VCR functions
Others Español
49
Playing discs
Special playback (cont’d)
Step by step playback
DVD-V
Video
VR
DVD-RW
DVD-RW
DVD-R
DVD+RW
SPACE
2
Video
DVD+R
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
DVD
VCR
DISPLAY
Press SKIP G button
repeatedly.
The playback will advance one
frame (or step) at a time when
you press the SKIP G button
with the sound muted.
1
SLOW
0
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
To play step by step backward:
Press SKIP H button repeatedly.
Every time you press the button,
the playback will go backward by
one frame.
SEARCH
MODE
1
3
SKIP
SKIP
CM SKIP
2
3
Press PLAY B button to
resume play.
Slow forward / Slow reverse play
DVD-V
Video
VR
DVD-RW
DVD-RW
Video
DVD-R
DVD+R
DVD+RW
1
POWER
During playback, press PAUSE k button, then press D or E
button.
Every time you press D or E button, approximate speed will be
changed as follows. (The sound will remain muted.)
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
g
g
x1/4
h
x1/8
h
g
x1/16
g
Pause
h
h
g
x1/16
h
DVD
VCR
PAUSE
g
x1/8
To return to the normal playback, press PLAY B button.
h
x1/2
PLAY
1
STOP
REC/OTR
SETUP
REC MONITOR
MENU/LIST TOP MENU
TIMER PROG.
1
1
1
ENTER
RETURN
Note
• Forward/reverse speed will be
indicated with icons as follows.
Forward (Approx. Speed)
x1/16:
x1/8:
x1/2:
Reverse (Approx. Speed)
x1/16:
x1/8:
x1/4:
50
Playing discs
Zoom
REC/OTR
DVD-V
Video
VR
DVD-RW
DVD-RW
Video
DVD-R
DVD+RW
DVD+R
1
x1.2
01:23:45
x1.5
1
SKIP
SKIP
CM SKIP
Select a desired zoom position
using K / L / { / B buttons, then
press ENTER button.
The zoom play will start.
• When selecting a smaller factor
than the current one, the zoom
area will not be displayed.
• To remove the zoom menu, press
ZOOM button again at step 1.
• To cancel the zoom function,
select x1.0 using { / B buttons,
then press ENTER button.
Marker Setup
VR
DVD-RW
DVD-RW
Screen for DVD:
Video
1
1
DVD-Video
01:23:45
DVD+R
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
1
2
3
4
5
6
AUDIO
7
DEF
SPACE
CD
OPEN/CLOSE
Playing discs
POWER
Video
Recording
There are four options
(x1.0,x1.2,x1.5 and x2.0), these
are displayed excluding the current zoom rate.
DVD+RW
SEARCH
MODE
Note
x2.0
3
DVD-R
CLEAR/C.RESET ZOOM
2
3
DVD-Video
B
DVD-V
RETURN
Getting started
1
ENTER
MENU/LIST TOP MENU
Connections
During playback, press
ZOOM button.
Zoom menu will appear.
Screen:
TIMER PROG.
REC MONITOR
2
Select a desired zoom factor
to zoom using { / B buttons,
then press ENTER button.
The zoom area will be displayed.
1
SETUP
Before you start
Special playback (cont’d)
CH
VIDEO/TV
SLOW
0
1
1
STOP
Screen for CD:
1
01:23:45
1
01:23:45
2
3
4
5
6
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Note
ber using { / B buttons.
When it reaches the desired
point, press ENTER button.
select the desired marker
number using { / B buttons,
then press ENTER button.
Others Español
4
To return to the marker later,
• To clear a marker, select the
marker number to be cleared,
then press CLEAR/C.RESET
button.
• All markers will be erased
when you operate these operations listed below.
– Opening the disc tray.
– Turning off the power.
– Recording to a recordable
disc.
– Changing the mode between
Original and Playlist.(VR mode)
•You can mark up to 6 points.
51
VCR functions
3
Select a desired marker numSelect
icon using { / B
buttons, then press ENTER
button.
Marker setup menu will appear.
MENU/LIST TOP MENU
Audio CD
CLEAR/C.RESET ZOOM
1
TIMER PROG.
ENTER
REC MONITOR
DVD-Video
2
SETUP
Changing the SETUP menu
1
PAUSE
PLAY
REC/OTR
During playback, press DISPLAY button.
The display menu will appear.
Screen:
DVD
VCR
Editing
This feature allows you to assign
a specific point on a disc to be
called back later.
DISPLAY
Playing discs
Search
Title/Chapter search
DVD-V
Video
VR
DVD-RW
DVD-RW
Video
DVD-R
DVD+RW
DVD+R
POWER
Using SKIP H / G buttons
1
During playback, press SKIP G button to skip the current
title or chapter and move to the next.
The title or chapter will move forward one at a time.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
To go back to the previous title or chapter, press SKIP H button.The
title or chapter will move backward one title at a time.
DVD
VCR
DISPLAY
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
RETURN
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
POWER
REC MODE
REC SPEED
SKIP
SKIP
1
Using DISPLAY button
1
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
1
01:23:45
2
DVD-Video
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
1
DISPLAY
DVD
VCR
PAUSE
PLAY
2
Select
icon using { / B buttons, then press ENTER button.
‘T’ for title will be highlighted.
STOP
REC/OTR
52
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
Title:
Enter a desired title number to search using K / L buttons or
number buttons, then press ENTER button.
Title search will start.
Chapter:
To move to ‘C’ for chapter, press B button.
Enter a desired chapter number to search using K / L buttons
or number buttons, then press ENTER button.
Chapter search will start.
SETUP
CM SKIP
RETURN
SKIP
SKIP
2
Playing discs
Before you start
Search (cont’d)
Track search
CD
MP3
Using SKIP H / G buttons
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
During playback, press SKIP G button to skip the current
track and move to the next.
The track will move forward one at a time.
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
SKIP
CM SKIP
1
Using DISPLAY button
SPACE
Getting started
To go back to the previous track, press SKIP H button.The track will
move backward one at a time.
SLOW
0
1
During playback, press DISPLAY button.
The display menu will appear.
Screen:
VCR
DISPLAY
1
DVD
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
Audio CD
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
2
3
SKIP
CM SKIP
Playing discs
2
Select
icon using { / B buttons, then press ENTER button.
‘T’ for track will be highlighted.
3
Editing
Enter a desired track number to search using K / L buttons or
number buttons, then press ENTER button.
Track search will start.
Time search
POWER
VR
DVD-RW
DVD-RW
DVD-R
DVD+RW
Video
DVD+R
CD
1
1
1
01:23:45
DVD-Video
1
01:23:45
Audio CD
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DEF
SPACE
Enter a desired time to
search using K / L buttons or
number buttons, then press
ENTER button.
Time search will start.
CH
VIDEO/TV
SLOW
0
DISPLAY
1
DVD
VCR
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
3
OPEN/CLOSE
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
Note
• Time search function is available only in the same track or
title.
53
Others Español
Screen for CD:
Select
icon using { / B
buttons, then press ENTER
button.
‘T’ for title or track will be highlighted.
To move to the clock icon, press
B button.
AUDIO
VCR functions
During playback, press DISPLAY button.
The display menu will appear.
Screen for DVD:
2
REC MODE
REC SPEED
Changing the SETUP menu
Video
DVD-V
Recording
01:23:45
PAUSE
PLAY
REC MONITOR
1
Connections
1
Playing discs
Repeat/Random/Program play
Repeat play
Video
VR
DVD-V
DVD-RW
DVD-RW
DVD-R
DVD+RW
Video
CD
DVD+R
MP3
1
During playback, press DISPLAY button.
The display menu will appear.
1
1
01:23:45
DVD-Video
2
Select
icon using { / B buttons, then press ENTER button.
Repeat menu will appear.
Screen:
1
1
01:23:45
DVD-Video
OFF
Title
Chapter
A-B
2
00:00:30
Audio CD
OFF
Track
All
A-B
114
00:00:30
MP3
OFF
Track
All
Group
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
POWER
3
Select a desired option to
repeat using K / L buttons,
then press ENTER button.
The selected repeat play will start.
Title:
The current title will be played
repeatedly. (DVD only)
PQRS
7
SPACE
1
DVD
1
Press SETUP button to display SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
A-B:
The A-B point will be played
repeatedly.
When pressing ENTER button
while A-B is highlighted, the starting point (A) will be decided.
Press ENTER button again to
select the ending point (B).
Track:
The current track will be played
repeatedly. (CD, MP3 only)
Group:
The current group will be played
repeatedly. (MP3 only)
54
PAUSE
TIMER PROG.
ENTER
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
SKIP
CM SKIP
• The A-B Repeat playback can
only be set within the current
title (for DVDs), or current
track (for Audio CDs).
• To cancel the repeat playback,
select OFF at step 2.The
repeat setting will also be cancelled when you stop playback.
• You cannot select “Group”
during the random playback
of MP3 files.
TUV
WXYZ
8
9
SPACE
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CD Playback Mode
Random Play
CLEAR/C.RESET ZOOM
Program Play
K / L buttons, then press
ENTER button.
Random playback will start.
2
3
Note
2
Select “CD” using { / B buttons, then press ENTER button.
CD Playback Mode menu will
appear.
SETUP
REC MONITOR
All:
The current disc will be played
repeatedly (CD, MP3 and DVDRW (VR mode) only).
3
Select “Random Play” using
Setup Menu
SLOW
DVD
STOP
REC/OTR
7
With this function, you can play a
disc randomly instead of playing it
in the original order.
First:
VIDEO/TV
PLAY
PQRS
MP3
CH
0
VCR
DISPLAY
Chapter:
The current chapter will be played
repeatedly. (DVD only)
Random play
CD
OPEN/CLOSE
SEARCH
MODE
CM SKIP
SKIP
SKIP
2
3
Note
• To cancel random playback,
press STOP C button twice
during random playback.
• “Playmode OFF” appears on
the screen.
Playing discs
Before you start
Repeat/Random/Program play (cont’d)
Program play
CD
DVD
1
3
Select “Program Play” using
K / L buttons, then press
ENTER button.
Program play list will appear.
POWER
4
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DEF
SPACE
SLOW
0
CD Playback Mode > Program Play
DISPLAY
DVD
VCR
-- -- -- -- -- -- -- -- -- --
5
PLAY
-- -- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- -- --
Total
00:00:00
STOP
1
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
Select a desired track using K
/ L buttons, then press
ENTER button or B button.
A cursor will move to the next.
SKIP
2
3
4
Playing discs
Select “CD” using { / B buttons, then press ENTER button.
CD Playback Mode menu will
appear.
CM SKIP
RETURN
SKIP
CD Playback Mode > Program Play
07 - - - - - - - - - - - - - - - -
--
-- -- -- -- -- -- -- -- --
--
-- -- -- -- -- -- -- -- --
--
-- -- -- -- -- -- -- -- --- -- -- -- -- -- -- -- --
---
Total
Recording
4
2
PAUSE
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Setup Menu
CH
VIDEO/TV
Getting started
Press SETUP button to display SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
OPEN/CLOSE
Connections
You can program the disc to play
in your desired order.
First:
00:04:30
CD Playback Mode
Editing
Random Play
Program Play
5
Note
Others Español
55
VCR functions
• To erase tracks you selected,
press CLEAR/C.RESET button.
• You can make program settings up to 50.
• To cancel program playback,
press STOP C button twice
during program playback.
• “Playmode OFF” appears on
the screen.
• You may also select a desired
track using Number buttons
at step 4.
Changing the SETUP menu
Press PLAY B button to start
program playback.
Program playback will start.
Playing discs
Selecting the format of audio and video
You can select the format of audio and video as you prefer depending
on the contents of the disc you are playing.
Switching audio soundtrack
VR
DVD-V
DVD-RW
When playing a DVD-Video disc
recorded with two or more
soundtracks (these are often in
different languages), you can
switch between them anytime
during playback.
On DVD-RW discs recorded in
VR mode, you can switch to main
(L), sub audio (R) or a mix of
both (L/R).
1
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
1
01:23:45
<DVD-RW VR mode>
POWER
1
1
00:00:00
1 Dolby Digital Dual L/R
2 Dolby Digital 2ch ----
Select
icon using { / B
buttons, then press ENTER
button.
Audio menu will appear.
<DVD-Video>
1 Dolby Digital 5.1ch English
2 Dolby Digital 2ch Japanese
56
2
3
JKL
MNO
4
5
6
OPEN/CLOSE
DEF
TUV
WXYZ
8
9
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
1
DVD
VCR
PAUSE
PLAY
STOP
3
REC/OTR
SETUP
Select a desired audio soundtrack using K / L buttons,
then press ENTER button.
Audio soundtrack will switch.
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
<DVD-RW VR mode>
DVD-Video
2
00:00:00
ABC
GHI
7
1
00:00:00
1 Dolby Digital Dual
2 Dolby Digital 2ch
1
AUDIO
.@/:
1
PQRS
1
1
DVD-RW
VR Original
REC MODE
REC SPEED
DVD-Video
DVD-RW
VR Original
L/R
L
R
4
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
Note
• Some discs will only allow
you to change the soundtrack from the disc’s menu.
Press TOP MENU button or
MENU / LIST button to display the disc’s menu.
• On DVD-RW discs recorded
in VR mode that may have
both a main and a sub audio
channel, you can switch to
main (L), sub audio (R), or a
mix of both (L/R).
• This unit CANNOT record
in both stereo and SAP
(Secondary Audio Program)
at the same time.
Playing discs
Before you start
Selecting the format of audio and video (cont’d)
CD
MP3
1
2
POWER
Select
icon using { / B
buttons, then press ENTER
button.
Audio menu will appear.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
Connections
When playing Audio CDs or MP3
files you can switch between
stereo, just the left channel or
just the right channel.
DEF
SPACE
CH
VIDEO/TV
SLOW
0
1
Audio CD
00:00:00
1
3
Select a desired audio channel using K / L buttons, then
press ENTER button.
Audio channel will switch.
DVD
VCR
DISPLAY
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
1
00:00:00
PAUSE
RETURN
Audio CD
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
POWER
REC MODE
REC SPEED
SKIP
2
3
Recording
L/R
L
R
SKIP
Playing discs
Switching subtitles
VR
DVD-V
DVD-RW
2
Select
icon using { / B
buttons, then press ENTER
button.
Subtitle menu will appear.
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
1
DEF
SPACE
1
00:00:00
DVD-Video
1
DISPLAY
OFF
1 English
2 Japanese
SLOW
DVD
VCR
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
DVD-Video
SEARCH
MODE
Select a desired subtitle language using K / L buttons,
then press ENTER button.
Subtitle will be displayed in the
selected language.
SKIP
2
3
Note
• Some discs will only allow
you to change the subtitle
from the disc’s menu. Press
TOP MENU button or MENU
/ LIST button to display the
disc’s menu.
• If a 4-digit language code
appears in the subtitle menu
at step 2, please refer to the
Language code on page 101.
57
Others Español
When selecting “OFF,” subtitle will
disappear.
CM SKIP
RETURN
SKIP
VCR functions
3
PAUSE
PLAY
CLEAR/C.RESET ZOOM
01:23:45
CH
VIDEO/TV
Changing the SETUP menu
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
OPEN/CLOSE
0
1
1
AUDIO
Editing
Many DVD Video discs have subtitles in one or more languages.
The case usually tells you which
subtitle languages are available.
You can switch subtitle languages
anytime during playback.
Getting started
During playback, press DISPLAY button.
The display menu will appear.
Screen:
Playing discs
Selecting the format of audio and video (cont’d)
Switching camera angles
DVD-V
Some DVD Video discs feature
scenes shot from two or more
angles, check the case for details:
it should be marked with an angle
icon if it contains multi-angle
scenes.
2
1
1
01:23:45
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
1
During playback, press DISPLAY button.
The display menu will appear.
Screen:
1
POWER
Select
icon using { / B
buttons, then press ENTER
button.
Angle will switch each time you
press ENTER button.
DVD
VCR
DISPLAY
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
DVD-Video
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
POWER
REC MODE
REC SPEED
SKIP
2
SKIP
Angle icon appears when a switching camera angle is available.
Reducing block noise
DVD-V
Video
VR
DVD-RW
DVD-RW
Video
DVD-R
DVD+RW
1
1
00:00:00
DVD+R
OFF
Type 1
Type 2
1
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
7
1
1
01:23:45
DVD-Video
TUV
WXYZ
8
9
Select
icon using { / B
buttons, then press ENTER
button.
Noise Reduction menu will appear.
CH
VIDEO/TV
SLOW
0
1
DISPLAY
DVD
VCR
PAUSE
PLAY
STOP
3
Select a desired option using
K / L buttons, then press
ENTER button.
Your setting will be activated.
2
OPEN/CLOSE
DEF
SPACE
During playback, press DISPLAY button.
The display menu will appear.
Screen:
58
AUDIO
DVD-Video
This function reduces noise in the
playback picture.When playing
back discs recorded in long time
mode such as SLP or SEP mode,
select "Type 1" or "Type 2".
("Type 2" is more effective.)
When playing back discs with a
few noises such as DVD-Video
discs, select "OFF".
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
Editing
Editing discs in Video mode
Title list allows you to check the titles recorded on
the disc easily.You can choose a title to play from this
screen and easily edit the titles as you prefer.
You can edit discs in Video mode for the following items.
Be sure that once you edit titles, they will not remain as
recorded originally.
• Deleting titles (Refer to page 61)
• Putting names on titles (Refer to pages 62-63)
• Setting or clearing chapter markers (Refer to page 64)
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
6
JAN/1 5:00AM
JAN/1 6:00AM
4
JAN/1 4:00AM
1
Note
2
7
• Once a disc is finalized, editing the disc or
recording to the disc will not be available.
(Except DVD-RW discs in VR mode.)
• A playlist is not available with the DVD-R discs
and DVD-RW discs in Video mode.
Getting started
1
Connections
Guide to a title list
Before you start
Information on disc editing
Disc > Edit > Original
JAN/1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Recording
1
XP
0:01:25
6
5
Playing discs
8 3
4
Editing
1. Titles recorded on the disc can be selected to
edit by pressing ENTER button with the cursor
on the title.
2. Protect icon, which appears when the title has
been protected.
3. The selected title thumbnails from the title list.
• The selected title will be played back automatically.
• The sound will be muted.
4. The menus in here for editing titles as you prefer.The available menus depends on the disc
type and the format type.
5. The details of the title, which can be changed to
the title name you will edit.
6. Time status bar of the title.
7. The arrow icon, which means the title list
includes a next or a previous page. Press B or
{ button by following direction of the icon.
8. Playback status of the current disc.
Changing the SETUP menu
VCR functions
Others Español
59
Editing
Information on disc editing (cont’d)
Editing discs in VR mode
For discs in VR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the
original.
Editing original titles
Editing playlists
The following items can be used to edit the original
titles.
• Deleting titles (Refer to page 65)
• Deleting parts of titles (Refer to pages 66-67)
• Putting names on titles (Refer to pages 67-68)
• Setting or clearing chapter markers (Refer to
pages 69-70)
• Setting pictures for thumbnails (Refer to pages
70-71)
• Setting titles to protect (Refer to page 72)
• Releasing titles from protecting (Refer to page 73)
You can create a playlist from original titles, so that
you can edit as you prefer without losing original
titles.
The following items you can edit with a playlist.
• Deleting titles (Refer to page 74)
• Deleting parts of titles (Refer to pages 75-76)
• Putting names on titles (Refer to pages 76-77)
• Setting or clearing chapter markers (Refer to
pages 78-79)
• Setting pictures for thumbnails (Refer to pages
79-80)
• Adding titles to a playlist (Refer to page 81)
• Deleting a playlist (Refer to page 82)
Note
• Original titles once edited will not remain as recorded originally.When you want to leave the original as
it is, edit the playlist as you prefer.
60
Editing
Before you start
Editing DVD-RW discs in Video mode
Deleting titles
Video
DVD-RW
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
2
3
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
DISPLAY
1
DEF
CH
VIDEO/TV
SLOW
DVD
VCR
PAUSE
PLAY
XP
1
6
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
Playing discs
Disc > Edit
1
Title Delete
Edit Title Name
Chapter Mark
Yes
2
JAN/ 1 1:00AM CH12
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
0:01:25
5
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit
5
1
JAN/1 4:00AM
Changing the SETUP menu
Disc > Edit
No
XP
Editing
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Recording
4
TIMER PROG.
ENTER
REC MONITOR
Getting started
Title Delete
Edit Title Name
Chapter Mark
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Finalize
ABC
GHI
Disc > Edit
0:01:25
Format
.@/:
1
OPEN/CLOSE
0
JAN/ 1 1:00AM CH12
Edit
AUDIO
SPACE
1
Disc
REC MODE
REC SPEED
7
DVD
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
POWER
Connections
You can delete titles which you
do not need anymore.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
When the last title in the title list
in Video mode is deleted, the disc
space to record will be increased.
First:
Title Delete
Edit Title Name
Chapter Mark
JAN/1 5:00AM
VCR functions
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
After writing to disc is completed, press SETUP button
to exit DISC menu.
61
Others Español
6
Editing
Editing DVD-RW discs in Video mode (cont’d)
Putting names on titles
Video
DVD-RW
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
DVD
4
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
POWER
5
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DVD
VCR
DISPLAY
PAUSE
Disc > Edit > Edit Title Name
1
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
ABC
abc
123
@!?
PLAY
STOP
1
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
0:01:25
CLEAR/C.RESET ZOOM
Disc
SEARCH
MODE
Edit
1
2
3
4
5
JAN/ 1 1:00AM CH12 XP
RETURN
SKIP
SKIP
CM SKIP
5
Format
Finalize
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
Disc > Edit > Edit Title Name
2
1
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
area for entering title names
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
0:01:25
62
0
When you finish entering a title
name, press ENTER button.
ABC
abc
123
@!?
<space>
<space>
0
<space>
!”#$%
&’() *
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
*1 Press 1 button, character set will be changed
to the " @!? " mode automatically.
• To delete letters, press CLEAR/C.RESET button
repeatedly. Holding CLEAR/C.RESET button
to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
Editing
Before you start
Editing DVD-RW discs in Video mode (cont’d)
6
POWER
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
Connections
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
Disc > Edit > Edit Title Name
ABC
abc
123
@!?
Yes
No
PLAY
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
abc
Writing to Disc
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SKIP
6
SKIP
CM SKIP
Recording
This operation may take a
while to be completed.
SEARCH
MODE
RETURN
Getting started
1
7
Playing discs
After writing to disc is completed, press SETUP button
to exit DISC menu.
Editing
Changing the SETUP menu
VCR functions
Others Español
63
Editing
Editing DVD-RW discs in Video mode (cont’d)
Setting or clearing chapter markers
Video
DVD-RW
You can put chapter markers in each
title. Once a chapter is marked, you can
use it for the chapter search feature.
You can set chapter markers at a specified time you selected for titles with
more than 5 minutes.
First:
4
POWER
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
3
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
Disc > Edit
DISPLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
JAN/ 1 1:00AM CH12
Title Delete
OFF
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
DEF
CH
VIDEO/TV
SLOW
XP
0:01:25
DVD
VCR
PAUSE
PLAY
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
5
SEARCH
MODE
Select a desired time using K
/ L buttons, then press
ENTER button.
Option window will appear.
Finalize
2
JKL
OPEN/CLOSE
0
1
Format
ABC
GHI
SPACE
1
Edit
AUDIO
.@/:
1
7
DVD
Disc
REC MODE
REC SPEED
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Disc > Edit
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
XP
0:01:25
64
Title Delete
OFF
Edit Title5Name
minutes
Chapter
10Mark
minutes
15 minutes
30 minutes
60 minutes
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
6
Select “Yes” using { / B buttons, then press ENTER button.
A chapter marker will be added.
If you select “OFF” at step 5, all
the chapter markers will be
erased.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
Note
• You cannot select a time for
putting markers beyond a
length of a title.
• The length of chapters may
be slightly longer or shorter
than the one specified at the
step 5.
• A chapter marker may be
delayed according to the
recording content.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original)
Deleting titles
VR
DVD-RW
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
POWER
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DISPLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
DVD
VCR
1
7
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
SEARCH
MODE
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
Format
Finalize
Disc Protect OFF ON
TIMER PROG.
ENTER
REC MONITOR
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Playing discs
Disc > Edit > Original
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Editing
6
Disc > Edit
Original
Disc > Edit > Original
1
3
Yes
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
7
5
JAN/1 5:00AM
.
After writing to disc is completed, press SETUP button
to exit DISC menu.
65
Others Español
1
JAN/1 4:00AM
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
VCR functions
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
4
Changing the SETUP menu
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit > Original
Recording
5
PAUSE
PLAY
CLEAR/C.RESET ZOOM
Edit
SLOW
Getting started
1
CH
VIDEO/TV
0
Disc > Edit > Original
1
OPEN/CLOSE
DEF
SPACE
DVD
Disc
AUDIO
Connections
When a title is deleted from an
original list in VR mode, the disc
space to record will be increased.
Be advised that the titles once
deleted cannot be brought back
to the disc.
First:
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
Deleting parts of titles
VR
DVD-RW
You can delete part of a title, the
disc space to record will be
increased.
Be advised that the parts once
deleted cannot be brought back
to the disc.
First:
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Format
Finalize
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
66
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
XP
0:00:55
6
Use SKIP H / G, E, D,
PLAY B, and PAUSE F buttons
to decide the start point, then
press ENTER.Then use SKIP H /
G, E, D, PLAY B, and
PAUSE F buttons again to move
to the end point, and press
ENTER. Press ENTER again to
start the preview.
A cursor will move to “Preview.”
You can check the preview by
pressing ENTER.
The bar at the bottom of the screen indicates the total and the elapsed time of the
title, and the area selected for deletion will
be indicated in red during the preview.
Before
editing
5
JAN/1 5:00AM
6
PQRS
TUV
WXYZ
8
9
DISPLAY
CH
VIDEO/TV
SLOW
DVD
VCR
Edited
Start point End point
PAUSE
6
PLAY
1
5
<Preview>
1
5
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
MENU/LIST TOP MENU
JAN/ 1 1:00AM CH12
Original
4
DEF
CLEAR/C.RESET ZOOM
1
Disc > Edit
3
MNO
REC MONITOR
Disc > Edit > Original
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
2
JKL
OPEN/CLOSE
0
Disc Protect OFF ON
2
ABC
GHI
SPACE
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
Edit
AUDIO
.@/:
1
7
1
Disc
REC MODE
REC SPEED
Disc > Edit > Original
DVD
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
POWER
SEARCH
MODE
6
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
7
POWER
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
CH
VIDEO/TV
SLOW
0
1
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
JAN/ 1 1:00AM CH12
No
No
PAUSE
PLAY
9
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
XP
Writing to Disc
XP
DVD
VCR
DISPLAY
MENU/LIST TOP MENU
RETURN
0:01:25
CLEAR/C.RESET ZOOM
This operation may take a
while to be completed.
8
SKIP
SKIP
CM SKIP
Note
9
After writing to disc is completed, press SETUP button
to exit DISC menu.
Putting names on titles
VR
DVD-RW
DVD
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
POWER
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
OPEN/CLOSE
DEF
SPACE
Editing
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
Playing discs
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
Recording
Select “Yes” using { / B buttons, then press ENTER button.
Selected area will be deleted, and a
chapter marker is created automatically where deletion is performed.
SEARCH
MODE
7
8
Getting started
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
Protect OFF
Yes
.@/:
1
PQRS
Disc > Edit > Original
JAN/ 1 1:00AM CH12
AUDIO
SPACE
Disc > Edit > Original
1
REC MODE
REC SPEED
Connections
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
If the thumbnail of the title is in the
deleted area, the thumbnail will be
set to the first picture of the title.
Playback will start from the newly
created chapter marker.
CH
VIDEO/TV
SLOW
0
DISPLAY
1
PAUSE
PLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
1
STOP
REC/OTR
SETUP
Original
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
RETURN
SKIP
SKIP
1
2
CM SKIP
Edit
Format
Finalize
Disc Protect OFF ON
67
Others Español
Instructions continue on page 68.
VCR functions
Disc
TIMER PROG.
ENTER
REC MONITOR
Changing the SETUP menu
Disc > Edit
DVD
VCR
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
6
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
POWER
6
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
CH
VIDEO/TV
SPACE
Disc > Edit > Original > Edit Title Name
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
ABC
abc
123
@!?
1
JAN/ 1 1:00AM CH12 XP
JAN/1 4:00AM
JAN/1 5:00AM
PAUSE
PLAY
STOP
8
5
DVD
VCR
DISPLAY
1
SLOW
0
REC/OTR
SETUP
0:01:25
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
area for entering title names
When you finish entering a title
name, press ENTER button.
SEARCH
MODE
3
4
5
6
7
RETURN
SKIP
SKIP
CM SKIP
7
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
Disc > Edit > Original > Edit Title Name
JAN/ 1 1:00AM CH12
CLEAR/C.RESET ZOOM
XP
1
0:01:25
ABC
abc
123
@!?
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
Select
Yes
5
No
abc
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
Disc > Edit > Original > Edit Title Name
1
ABC
abc
123
@!?
ABC
abc
123
@!?
<space>
<space>
0
<space>
!”#$%
&’() *
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
0
Writing to Disc
This operation may take a
while to be completed.
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
*1 Press 1 button, character set will be changed
to the " @!? " mode automatically.
JAN/ 1 1:00AM CH12 XP
0:01:25
68
• To delete letters, press CLEAR/C.RESET button
repeatedly. Holding CLEAR/C.RESET button
to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
4
Select a desired title using K /
1
Format
Finalize
Disc Protect OFF ON
XP
0:01:25
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
JAN/ 1 1:00AM CH12
SLOW
DISPLAY
DVD
VCR
PAUSE
6
PLAY
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
CLEAR/C.RESET ZOOM
SEARCH
MODE
6
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
XP
6
Use SKIP H / G, E, D,
PLAY B, and PAUSE F buttons to decide the point at
which you will create a new
chapter marker. Or, use SKIP
H / G to decide a chapter
marker that you will delete.
Select “Add” or “Delete”
accordingly using K / L buttons, then press ENTER button.
Option window will appear.
<Add>:
1
F
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
JAN/1 5:00AM
No
XP
0:01:25
Instructions continue on page 70.
69
Others Español
JAN/ 1 1:00AM CH12
JAN/1 4:00AM
9
0:01:25
Chapter 1/1
5
8
CH
VIDEO/TV
Disc > Edit > Original
1
4
WXYZ
VCR functions
Disc > Edit > Original
TUV
Changing the SETUP menu
Select “Original” using { / B buttons, then press ENTER button.
Original list will appear.
6
PQRS
Editing
3
5
Playing discs
Original
4
DEF
0
5
Select “Chapter Mark” using
Chapter 1/1
Disc > Edit
3
MNO
MENU/LIST TOP MENU
1
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
2
JKL
REC MONITOR
Disc > Edit > Original
2
ABC
GHI
SPACE
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
K / L buttons, then press
ENTER button.
Option window will appear.
Edit
.@/:
1
OPEN/CLOSE
Recording
Disc
JAN/ 1 1:00AM CH12
AUDIO
Getting started
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
REC MODE
REC SPEED
7
Disc > Edit > Original
DVD
1
POWER
L / { / B buttons, then press
ENTER button.
Original menu will appear.
Connections
You can put chapter markers in each title.
Once a chapter is marked, you can use it
for the chapter search feature.
You can put a chapter marker anywhere
you want.
When the number of chapter markers in
the original list comes to 999 in total, you
cannot add any more chapter markers.
First:
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
<Delete>:
This operation may take a
while to be completed.
Disc > Edit > Original
POWER
1
Chapter 2/2
F
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
The chapter marker which you
selected will be deleted.
<Delete>:
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
7
1
Chapter 2/2
7
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
WXYZ
8
9
JAN/ 1 1:00AM CH12
SLOW
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
Delete
Index Picture
Protect OFF ON
No
XP
DVD
VCR
DISPLAY
Yes
Disc > Edit > Original
TUV
CH
VIDEO/TV
0
Disc > Edit > Original
• You cannot delete the first
chapter marker of each title.
OPEN/CLOSE
DEF
SPACE
0:01:25
Select “Yes” using { / B buttons, then press ENTER button.
When you select “Add” at step 6, a
new chapter marker will be created
at the point you have decided.
When you select “Delete” at step 6,
the chapter marker you have selected
will be deleted.
<Add>:
AUDIO
PAUSE
PLAY
8
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
Writing to Disc
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
This operation may take a
while to be completed.
SEARCH
MODE
CM SKIP
POWER
REC MODE
REC SPEED
SKIP
7
SKIP
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
No
XP
Writing to Disc
Setting pictures for thumbnails
VR
DVD-RW
You can set a picture to each title for
a thumbnail. It helps you to remember the contents of the title you are
playing.The beginning picture has
been selected as the default.
First:
DVD
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
Disc > Edit
1
PLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
STOP
1
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Original
CLEAR/C.RESET ZOOM
SEARCH
MODE
Disc
RETURN
SKIP
SKIP
1
2
CM SKIP
Edit
Format
Note
Finalize
Disc Protect OFF ON
70
• If a selected picture for a
thumbnail is deleted by deleting a part of a title, a default
picture will be selected.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
3
POWER
Select “Yes” using { / B buttons, then press ENTER button.
A picture for thumbnail will be
set.
2
3
JKL
MNO
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
SPACE
CH
VIDEO/TV
SLOW
0
VCR
DVD
PAUSE
Disc > Edit > Original
1
5
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
5
PLAY
7
No
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
XP
MENU/LIST TOP MENU
RETURN
Writing to Disc
CLEAR/C.RESET ZOOM
SEARCH
MODE
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
5
CM SKIP
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
Playing discs
Disc > Edit > Original
This operation may take a
while to be completed.
SKIP
Recording
4
SKIP
3
4
5
6
Getting started
1
2
JAN/1 4:00AM
ABC
GHI
DISPLAY
1
AUDIO
.@/:
1
7
Disc > Edit > Original
4
REC MODE
REC SPEED
Connections
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
6
XP
0:01:25
Editing
5
Changing the SETUP menu
Select “Index Picture Set”
using K / L buttons. Use SKIP
H / G, E, D, PLAY B,
and PAUSE F buttons to
decide the picture you want
to select as a thumbnail.Then
press ENTER button.
Option window will appear.
VCR functions
Disc > Edit > Original
1
F
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
Others Español
71
Editing
Editing DVD-RW discs in VR mode (Original) (cont’d)
Setting titles to protect
VR
DVD-RW
To prevent accidental editing or
erasing the titles, you can protect
them from the original menu.
First:
DVD
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
POWER
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
SPACE
DISPLAY
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
XP
0:01:25
Disc
Edit
5
Select “Protect OFF ➔ ON”
Format
Finalize
Disc Protect OFF ON
1
7
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
SETUP
PAUSE
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Yes
JAN/ 1 1:00AM CH12
DVD
STOP
REC/OTR
Disc > Edit > Original
1
SLOW
VCR
PLAY
using K / L buttons, then
press ENTER button.
Option window will appear.
2
CH
VIDEO/TV
0
Disc > Edit > Original
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
OPEN/CLOSE
DEF
PQRS
7
1
AUDIO
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
No
XP
0:01:25
6
Disc > Edit
Select “Yes” using { / B buttons, then press ENTER button.
Disc > Edit > Original
1
Original
3
Yes
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
Disc > Edit > Original
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
72
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
5
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
To protect a whole disc:
Select “Disc Protect” from Disc
menu, then select “Yes”.
Refer to “Setting a disc to protect” on page 42.
Note
• The protected title will be
marked with a key icon in the
original list.
Editing
Before you start
Editing DVD-RW discs in VR mode (Original) (cont’d)
Releasing titles from protecting
VR
DVD-RW
First:
DVD
4
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
1
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
Connections
You are allowed to release the
titles protecting feature once protected.
SPACE
CH
VIDEO/TV
SLOW
0
Disc Edit > Original
2
JAN/ 1 2:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
XP
0:01:25
Disc
Edit
VCR
DVD
PLAY
1
7
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
Format
SEARCH
MODE
Select “Protect ON ➔ OFF”
using K / L buttons, then
press ENTER button.
Option window will appear.
SKIP
1
2
3
4
5
6
Disc Edit > Original
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
2
B
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Yes
JAN/ 1 2:00AM CH12
No
Playing discs
2
CM SKIP
RETURN
SKIP
Recording
5
Disc Protect OFF ON
TIMER PROG.
ENTER
REC MONITOR
CLEAR/C.RESET ZOOM
Finalize
PAUSE
Getting started
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
DISPLAY
XP
0:01:25
Disc > Edit
Editing
6
Original
Changing the SETUP menu
Select “Yes” using { / B buttons, then press ENTER button.
The key icon will disappear from
the title in the original list.
Disc Edit > Original
3
2
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Yes
JAN/ 1 2:00AM CH12
VCR functions
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
No
XP
Writing to Disc
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
73
Others Español
1
Editing
Editing DVD-RW discs in VR mode (Playlist)
Deleting titles
VR
DVD-RW
In VR mode, even when a title is
deleted from a Playlist, the original
title will remain in an Original list.
The disc space to record will not
be increased.
First:
4
POWER
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
PQRS
DVD
SPACE
CH
VIDEO/TV
SLOW
0
Disc > Edit > Playlist
1
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
JAN/ 1 1:00AM CH12
DISPLAY
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
VCR
DVD
Disc
5
Select “Title Delete” using K
Edit
Format
/ L buttons, then press
ENTER button.
Option window will appear.
Finalize
Disc Protect OFF ON
Disc > Edit > Playlist
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
6
Disc > Edit
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit > Playlist
Original
1
3
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
JAN/ 1 1:00AM CH12
No
XP
Writing to Disc
This operation may take a
while to be completed.
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
PAUSE
PLAY
1
7
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
74
AUDIO
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Deleting parts of titles
VR
DVD-RW
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
Finalize
Disc Protect OFF ON
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
JAN/1 4:00AM
5
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
PAUSE
6
PLAY
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
SEARCH
MODE
6
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
XP
0:00:55
6
Use SKIP H / G, E, D,
PLAY B, and PAUSE F buttons to
decide the start point, then press
ENTER.Then use SKIP H / G,
E, D, PLAY B, and PAUSE F
buttons again to move to the end
point, and press ENTER. Press
ENTER again to start the preview.
A cursor will move to “Preview.”
You can check the preview by pressing ENTER.
The bar at the bottom of the screen indicates the total and the elapsed time of the
title, and the area selected for deletion will
be indicated in red during the preview.
Start point End point
Before
editing
Add New
Title
Delete
Playlist
JAN/1 5:00AM
Edited
Instructions continue on page 76.
75
Others Español
4
DVD
MENU/LIST TOP MENU
<Preview>
1
SLOW
VCR
VCR functions
Disc > Edit > Playlist
9
Changing the SETUP menu
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
8
CH
VIDEO/TV
Editing
3
6
WXYZ
Playing discs
Original
5
TUV
CLEAR/C.RESET ZOOM
1
Disc > Edit
4
PQRS
DISPLAY
5
2
DEF
0
Disc > Edit > Playlist
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
3
MNO
Recording
Format
2
JKL
SPACE
Select “Scene Delete” using
K / L buttons, then press
ENTER button.
Option window will appear.
Edit
ABC
GHI
OPEN/CLOSE
Getting started
1
AUDIO
.@/:
1
7
1
Disc
REC MODE
REC SPEED
Disc > Edit > Playlist
DVD
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
POWER
Connections
You can delete a specific part of a title.
Even when a title is deleted from the
playlist, the original title will remain.
The disc space to record will not be
increased.
First:
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Part of a title will be deleted.
7
Yes
JAN/ 1 1:00AM CH12
Yes
JAN/ 1 1:00AM CH12
0:01:25
6
TUV
WXYZ
8
9
CH
VIDEO/TV
SLOW
DVD
VCR
No
PAUSE
PLAY
XP
STOP
9
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
This operation may take a
while to be completed.
RETURN
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
SKIP
SKIP
CM SKIP
7
8
9
After writing to disc is completed, press SETUP button
to exit DISC menu.
8
MNO
5
0
No
XP
JKL
4
DISPLAY
Writing to Disc
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
3
GHI
DEF
SPACE
Disc > Edit > Playlist
1
2
7
Title Delete
Scene Delete
Start
Edit Title Name
End
Chapter Mark
Preview
Index Picture
Delete
1
ABC
PQRS
Disc > Edit > Playlist
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
.@/:
1
Select “Yes” using { / B buttons, then press ENTER button.
Note
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
Putting names on titles
VR
DVD-RW
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
Original/PlayList menu will appear.
Screen:
POWER
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
DVD
CH
VIDEO/TV
SLOW
0
DVD
VCR
PAUSE
Original
1
PLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Edit
Format
Finalize
Disc Protect OFF ON
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
Select “Edit” using K / L buttons, then press ENTER button.
76
OPEN/CLOSE
DEF
SPACE
DISPLAY
2
AUDIO
Disc > Edit
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
1
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
1
2
3
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
4
POWER
Select “Yes” using { / B buttons, then press ENTER button.
The name you entered will be
activated for the title.
2
3
JKL
MNO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
SPACE
CH
VIDEO/TV
SLOW
0
VCR
DVD
PAUSE
Disc > Edit > Playlist > Edit Title Name
1
XP
ABC
abc
123
@!?
Yes
0:01:25
PLAY
STOP
8
REC/OTR
No
SETUP
abc
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
5
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
1
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
SKIP
CM SKIP
This operation may take a
while to be completed.
8
After writing to disc is completed, press SETUP to exit
DISC menu.
[ Guide to edit title name ]
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
123
@!?
[Step2]: Press Number buttons following by the list
below.
0
abc
123
@!?
<space>
0
<space>
!”#$%
&’() *
+ ,- ./ :;
<=>?
@[]^
_{|}
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
Disc > Edit > Playlist > Edit Title Name
1
ABC
abc
123
@!?
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
JAN/ 1 1:00AM CH12 XP
0:01:25
area for entering title names
• To delete letters, press CLEAR/C.RESET button
repeatedly. Holding CLEAR/C.RESET button
to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
77
Others Español
When you finish entering a title
name, press ENTER button.
VCR functions
*1 Press 1 button, character set will be changed
to the " @!? " mode automatically.
Changing the SETUP menu
ABC
<space>
Editing
Select
Press
6
Playing discs
Disc > Edit > Playlist > Edit Title Name
SKIP
Recording
4
5
6
7
RETURN
Writing to Disc
Getting started
JAN/ 1 1:00AM CH12
ABC
GHI
DISPLAY
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
AUDIO
.@/:
1
7
Disc > Edit > Playlist
1
REC MODE
REC SPEED
Connections
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
7
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the playlist comes to
999 in total, you cannot add any
more chapter markers.
First:
DVD
Disc > Edit > Playlist
POWER
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
Add New
Title
Delete
Playlist
5
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
7
SPACE
JAN/1 5:00AM
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
DVD
1
6
STOP
1
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
JAN/ 1 1:00AM CH12
CLEAR/C.RESET ZOOM
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
Disc
Finalize
Disc Protect OFF ON
5
Select “Chapter Mark” using K / L
buttons, then press ENTER button.
Option window will appear.
Disc > Edit > Playlist
1
2
Chapter 1/1
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
Disc Setting
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
XP
0:01:25
6
Use SKIP H / G, E, D,
PLAY B, and PAUSE F buttons to
decide the point at which you will
create a new chapter marker. Or,
use SKIP H / G to decide a
chapter marker that you will
delete. Select “Add” or “Delete”
accordingly using K / L buttons,
then press ENTER button.
Option window will appear.
<Add>:
Disc > Edit > Playlist
1
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
PAUSE
PLAY
Disc > Edit > Playlist
Format
CH
VIDEO/TV
SLOW
VCR
MENU/LIST TOP MENU
Edit
OPEN/CLOSE
DEF
PQRS
DISPLAY
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
78
AUDIO
0
1
3
REC MODE
REC SPEED
SEARCH
MODE
6
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
<Delete>:
This operation may take a
while to be completed.
Disc > Edit > Playlist
1
F
Yes
JAN/ 1 1:00AM CH12
No
XP
POWER
The chapter marker which you
selected will be deleted.
<Delete>:
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
Disc > Edit > Playlist
OPEN/CLOSE
DEF
PQRS
7
0:01:25
AUDIO
Connections
Chapter 2/2
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
SPACE
CH
VIDEO/TV
SLOW
0
Chapter 2/2
7
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
Yes
Disc > Edit > Playlist
1
Yes
JAN/ 1 1:00AM CH12
Writing to Disc
PAUSE
PLAY
STOP
8
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
This operation may take a
while to be completed.
RETURN
CLEAR/C.RESET ZOOM
SKIP
SEARCH
MODE
CM SKIP
POWER
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
7
SKIP
8
After writing to disc is completed, press SETUP button
to exit DISC menu.
Playing discs
Chapter 1/1
Title Delete
Scene Delete
Edit Title Name
ChapterAdd
Mark
DeleteSet
Index Picture
XP
DVD
Recording
Select “Yes” using { / B buttons, then press ENTER button.
When you select “Add” at step 6, a
new chapter marker will be created
at the point you have decided.
When you select “Delete” at step 6,
the chapter marker you have selected
will be deleted.
<Add>:
JAN/ 1 1:00AM CH12
No
VCR
DISPLAY
Getting started
• You cannot delete the first
chapter of each title.
1
No
XP
Writing to Disc
Setting pictures for thumbnails
VR
DVD
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
PQRS
7
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
Disc > Edit
1
STOP
1
SETUP
REC MONITOR
TIMER PROG.
ENTER
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
Original
Disc
Edit
Format
Finalize
Disc Protect OFF ON
RETURN
SKIP
SKIP
1
2
Note
Instructions continue on page 80.
79
Others Español
• If a selected picture for a
thumbnail is deleted by deleting a part of a title, a default
picture will be selected.
VCR functions
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
REC/OTR
Changing the SETUP menu
You can set a picture to each title for
a thumbnail. It helps you to remember
the contents of the title you are playing.The beginning picture has been
selected as the default.
First:
OPEN/CLOSE
Editing
DVD-RW
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
6
POWER
Select “Yes” using { / B buttons, then press ENTER button.
A picture for thumbnail will be
set.
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
2
3
JKL
MNO
Add New
Title
Delete
Playlist
5
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
SPACE
CH
VIDEO/TV
SLOW
0
VCR
DVD
PAUSE
Disc > Edit > Playlist
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Yes
JAN/1 4:00AM
ABC
GHI
DISPLAY
1
AUDIO
.@/:
1
7
Disc > Edit > Playlist
4
REC MODE
REC SPEED
5
PLAY
STOP
7
No
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
JAN/1 5:00AM
JAN/ 1 1:00AM CH12
XP
MENU/LIST TOP MENU
RETURN
Writing to Disc
CLEAR/C.RESET ZOOM
SEARCH
MODE
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
Disc > Edit > Playlist
1
JAN/ 1 1:00AM CH12
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
XP
0:01:25
5
Select “Index Picture Set”
using K / L buttons. Use SKIP
H / G, E, D, PLAY B,
and PAUSE F buttons to
decide the picture you want
to select as a thumbnail.Then
press ENTER button.
Option window will appear.
Disc > Edit > Playlist
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
F
Yes
JAN/ 1 1:00AM CH12
No
XP
0:01:25
80
This operation may take a
while to be completed.
7
After writing to disc is completed, press SETUP button
to exit DISC menu.
5
CM SKIP
SKIP
SKIP
3
4
5
6
Editing
Before you start
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Adding titles to a Playlist
VR
DVD-RW
DVD
4
POWER
Select “Add New Title” using
K / L / { / B buttons, then
press ENTER button.
Original list will appear.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
Connections
You can add or delete a title in
the playlist as you prefer.
You can add titles to a Playlist up
to 99.
First:
CH
VIDEO/TV
SLOW
SPACE
0
Disc > Edit > Playlist > Add New Title
1
2
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
DVD
VCR
3
PLAY
JAN/10 10:30AM
JAN/12 5:00PM
JAN/12 8:00PM
1
6
Disc
STOP
REC/OTR
SETUP
MENU/LIST TOP MENU
SEARCH
MODE
Finalize
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Disc Protect OFF ON
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
Recording
5
Format
TIMER PROG.
ENTER
REC MONITOR
CLEAR/C.RESET ZOOM
Edit
PAUSE
Getting started
1
DISPLAY
Disc > Edit > Playlist > Add New Title
Playing discs
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
58%
Writing to Disc
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
5
6
4
JAN/1 5:00AM
Changing the SETUP menu
JAN/1 4:00AM
Editing
Disc > Edit > Playlist
Disc > Edit
JAN/12 8:00PM
Original
6
3
Disc > Edit > Playlist
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
5
To delete a title from Playlist,
refer to “Deleting titles” on page
74.
To delete a Playlist, refer to
“Deleting a Playlist” on page 82.
Add New
Title
Delete
Playlist
JAN/1 5:00AM
81
Others Español
1
After writing to disc is completed, press SETUP button
to exit DISC menu.
VCR functions
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Editing
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Deleting a Playlist
VR
DVD-RW
A Playlist can be deleted if no
longer needed.
First:
DVD
1
4
POWER
Select “Delete Playlist” using
K / L / { / B buttons, then
press ENTER button.
Option window will appear.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Disc > Edit > Playlist
DISPLAY
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
VCR
DVD
PAUSE
PLAY
4
Disc
JAN/1 4:00AM
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
Yes
No
STOP
1
REC/OTR
SETUP
Edit
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
Format
CLEAR/C.RESET ZOOM
Finalize
Disc Protect OFF ON
SEARCH
MODE
5
Select “Yes” using { / B buttons, then press ENTER button.
A Playlist will be erased.
2
Select “Edit” using K / L buttons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
CM SKIP
SKIP
SKIP
1
2
3
4
5
The unit will be in stop
mode after exiting the
DISC menu automatically.
Disc > Edit
Original
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc > Edit > Playlist
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
82
5
JAN/1 5:00AM
Add New
Title
Delete
Playlist
Note
• Deleting a Playlist will not
increase the available recording time on disc.
Editing
Before you start
Editing DVD-R discs
Deleting titles
DVD-R
Disc > Edit
1
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
POWER
XP
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
OPEN/CLOSE
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
0:01:25
AUDIO
Connections
You can delete titles which you
do not need, however the disc
space to record on the disc will
not be changed.
Be aware to know that the titles
once deleted cannot be brought
back to the disc.
First:
SPACE
CH
VIDEO/TV
SLOW
0
You cannot select “Chapter Mark”.
DISPLAY
VCR
DVD
PAUSE
DVD
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
1
6
STOP
REC/OTR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
1
Edit
Title Delete
Edit Title Name
Chapter Mark
Format
Finalize
Yes
JAN/ 1 1:00AM CH12
No
CM SKIP
RETURN
SKIP
SKIP
1
2
3
4
5
XP
Playing discs
0:01:25
5
2
Select “Yes” using { / B buttons, then press ENTER button.
Title will be deleted.
Disc > Edit
1
Disc > Edit
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
Title Delete
Edit Title Name
Chapter Mark
Yes
4
JAN/1 4:00AM
JAN/ 1 1:00AM CH12
Changing the SETUP menu
1
Editing
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
No
XP
Writing to Disc
5
JAN/1 5:00AM
This operation may take a
while to be completed.
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
VCR functions
3
Recording
Disc
TIMER PROG.
ENTER
REC MONITOR
SEARCH
MODE
Disc > Edit
SETUP
Getting started
PLAY
4
6
After writing to disc is completed, press SETUP button
to exit DISC menu.
Others Español
83
Editing
Editing DVD-R discs (cont’d)
Putting names on titles
DVD-R
You can put names on the titles
and change the names from this
menu.
The names you put on the titles
will be displayed on a titlelist.
First:
4
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
POWER
5
REC MODE
REC SPEED
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
7
SPACE
1
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
SLOW
VCR
DISPLAY
ABC
abc
123
@!?
JAN/ 1 1:00AM CH12 XP
0:01:25
DVD
PAUSE
PLAY
STOP
1
7
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
5
To enter a title name, follow
Format
CH
VIDEO/TV
0
Disc > Edit > Edit Title Name
Edit
OPEN/CLOSE
DEF
PQRS
DVD
Disc
AUDIO
SEARCH
MODE
1
2
3
4
5
6
RETURN
SKIP
SKIP
CM SKIP
the steps of "Guide to edit
title name" on this page.
character set
Finalize
Disc > Edit > Edit Title Name
ABC
abc
123
@!?
1
2
Select “Edit” using K / L buttons, then press ENTER button.
Titlelist will appear.
Screen:
Disc > Edit
1
1
2
3
JAN/1 1:00AM
JAN/1 2:00AM
JAN/1 3:00AM
4
JAN/1 4:00AM
[ Guide to edit title name ]
JAN/ 1 1:00AM CH12 XP
0:01:25
area for entering title names
When you finish entering a title
name, press ENTER button.
JAN/1 5:00AM
6
Disc > Edit > Edit Title Name
3
1
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
ABC
abc
123
@!?
Yes
JAN/ 1 1:00AM CH12
Title Delete
Edit Title Name
Chapter Mark
abc
Writing to Disc
This operation may take a
while to be completed.
7
XP
0:01:25
You cannot select “Chapter Mark”.
84
Select
ABC
abc
123
@!?
<space>
<space>
0
<space>
!”#$%
&’() *
+ ,- ./ :;
<=>?
@[]^
_{|}
Press
1
*1
*1
1
2
ABC
abc
2
3
DEF
def
3
4
GHI
ghi
4
5
6
JKL
jkl
5
MNO
mno
6
7
8
PQRS
pqrs
7
TUV
tuv
8
9
WXYZ
wxyz
9
No
Disc > Edit
1
123
@!?
[Step2]: Press Number buttons following by the list
below.
0
Select “Yes” using { / B buttons, then press ENTER button.
5
[Step1]: Select a desired character set using K/ L
buttons, then press
ABC
ENTER button.
abc
After writing to disc is completed, press SETUP button
to exit DISC menu.
*1 Press 1 button, character set will be changed
to the " @!? " mode automatically.
• To delete letters, press CLEAR/C.RESET button
repeatedly. Holding CLEAR/C.RESET button
to delete all letters.
• To go on to the next entering area for letters,
press B button.
• You can enter up to 30 letters.
Changing the SETUP menu
Before you start
Tour of the SETUP menu
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
SETUP menu
Audio Language
Original
English
French
Set the language for audio.
Subtitle Language
OFF
English
French
Set the language for subtitle.
OSD Background
Transparency
100%
Set the background transparency of OSD
screen.
OSD Background
Color
1
2
3
35%
25%
Set the OSD screen color.
1 (Green), 2 (Blue), 3 (Red)
English
Français
Español
Set the language for OSD
(On Screen Display).
Screen Saver
OFF
5 minutes
10minutes
Set the time to work the screen saver on
the screen.
Digital Out
Dolby Digital
PCM
Stream
Set the type of sound signal which outputs
from the digital audio output jack.
ON
OFF
Set whether DTS signal will be output or
not.
ON
OFF
Compressing the range of sound volume.
ON
OFF
Outputting the sound during play in fast
forward.
Parental Lock
ALL
level 8 to 1
Set the parental level of your DVD discs.
(Change password)
Enter the current
four-digit password
Set and change the password.
VCR functions
Dynamic Range
Control
Fast Forward with
Audio
Changing the SETUP menu
DTS
Set whether the sound recorded in 96kHz
will be down sampled in 48kHz.
Editing
Auto
48kHz
96kHz
Playing discs
OSD Language
PCM
4.Parental setting
Pages 92-93
Recording
3.Audio setting
Pages 90-91
Set the language for disc menu.
Getting started
2.Display setting
Pages 88-89
Disc Menu Language English
French
Spanish
Contents
Connections
1.Language setting
Pages 86-87
Items (highlight is the default)
Note
85
Others Español
• If you change the setting in SETUP
menu, the information of contents
stays on even when the power is
switched off.
Changing the SETUP menu
Language setting
Press STOP button if you are playing a disc.
POWER
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
4
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
5
Setup Menu
2
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
4
Select a desired item using K / L buttons, then press
ENTER button.
Note
• Only the languages supported
by the disc can be selected.
• Audio Language setting may
not be available to some
discs.
• You can change or switch off
the subtitles on a DVD disc
also from the disc menu if it
is available.
86
Changing the SETUP menu
Before you start
Language setting (cont’d)
Disc Menu Language (Default : English)
Set the language for Disc Menu.
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Setup > Playback
DVD
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
DVD
4:3 Letter Box
All
English
English
French
Original
Spanish
OFF
Other
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Setup > Playback
TV Aspect
Setup > Playback
DVD
TV Aspect
Original
OFF
Audio Language
Digital Out
4:3 Letter Box
All
Original
English
English
Original
French
OFF
Spanish
Other
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
• When Original is selected, the
audio language will be in the
disc’s default language.
Setup > Playback
Setup > Playback
DVD
4:3 Letter Box
All
English
TV Aspect
Disc Menu Language
Audio Language
Original
Audio Language
Subtitle Language
OFF
Subtitle Language
TV Aspect
DVD
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
Parental Lock
Disc Menu Language
Digital Out
Editing
Digital Out
4:3 Letter Box
All
OFF
English
English
Original
French
OFF
Spanish
Other
Parental Lock
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
age
e
Code Input
Audio
---ON
• When you finish entering
the code, press ENTER
button. Refer to the language code table on page
101.
VCR functions
Control
Changing the SETUP menu
If “Other” is selected, press 4-digit code using number buttons.
All
English
English
French
Original
Spanish
OFF
Other
Playing discs
Subtitle Language (Default : OFF)
Set the subtitle language.
Recording
4:3 Letter Box
All
English
DVD
Getting started
Audio Language (Default : Original)
Set the Audio language.
Connections
Setup > Playback
OFF
Press SETUP button to exit SETUP menu.
87
Others Español
5
Changing the SETUP menu
Display setting
Press STOP button if you are playing a disc.
POWER
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
5
Setup Menu
2
Playback Setting
3
Select “Display” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
Select a desired item using K / L buttons, then press
ENTER button.
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
SEARCH
MODE
Setup
88
SETUP
CLEAR/C.RESET ZOOM
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
4
STOP
REC/OTR
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Changing the SETUP menu
Setup > Display
DVD
OSD Background Transparency 35%
OSD Language
1
English
Screen Saver
10 minutes
DVD
OSD Background Transparency 35%100%
85%
OSD Background Color
1
70%
OSD Language
English
50%
Screen Saver
10 minutes
35%
25%
10%
0%
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Setup > Display
DVD
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Transparency 35%
OSD Background Color
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
Screen Saver
11
2
English
3
10 minutes
Setup > Display
VCR
OSD Language
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Recording
OSD Language (Default : English)
Set the language for OSD.
Setup > Display
VCR
DVD
OSD Background Transparency 35%
OSD Background Color
1
OSD Background Color
OSD Language
English
OSD Language
Screen Saver
10 minutes
Screen Saver
DVD
1
English
English
Français
10 minutes
Español
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
DVD
Setup > Display
DVD
OSD Background Transparency 35%
OSD Background Color
OSD Background Color
OSD Language
1
English
Screen Saver
10 minutes
Screen Saver
OSD Language
1
OFF
5English
minutes
1010
minutes
minutes
15 minutes
30 minutes
VCR functions
5
Changing the SETUP menu
OSD Background Transparency 35%
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Editing
Screen Saver (Default : 10 minutes)
Set the time to work the screen saver function on the screen.
Playing discs
OSD Background Transparency 35%
Setup > Display
Getting started
OSD Background Color (Default : 1 Green)
Set the OSD screen color.
You can choose one among 1(Green), 2(Blue), and 3(Red).
Connections
OSD Background Color
Setup > Display
Before you start
Display setting (cont’d)
OSD Background Transparency (Default : 35%)
Set the background transparency of OSD screen.
You can choose one among 0% through 100%.
Press SETUP button to exit SETUP menu.
Others Español
89
Changing the SETUP menu
Audio setting
Choose the appropriate Audio settings for your equipment.
It will only affect DVD discs during playback.
Press STOP button if you are playing a disc.
POWER
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
1
5
Setup Menu
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
2
Select “SETUP” using { / B buttons, then press
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
2
3
4
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
DVD
4:3 Letter Box
All
English
Original
OFF
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Note
• Dynamic Range Control function is available only on the
discs which are recorded in
the Dolby Digital format.
4
Select a desired item using K / L buttons, then press
ENTER button.
Digital Out
Set the digital audio output.
Setup > Playback
TV Aspect
DVD
TV Aspect
Disc Menu Language
Disc Menu Language
4:3 Letter Box
All
English
Audio Language
Original
Audio Language
Original
Subtitle Language
OFF
Subtitle Language
Parental Lock
Digital Out
90
Setup > Playback
4:3 Letter Box
All
English
Parental Lock
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
PCM
ON
Dolby
Digital
DTSOFF
• Select a setting using K / L
buttons, then press ENTER
button.
Option window will appear.
Proceed to steps A,B or C.
Changing the SETUP menu
A
Settings for PCM (Default : Auto)
OFF
PCM Auto
48kHz
ON
Dolby
Digital
96kHz
DTSOFF
ntrol
udio
Settings for Dolby Digital (Default : Stream)
OFF
ntrol
udio
C
PCM
ON
Dolby
Digital
PCM
Stream
DTSOFF
• Select a setting using K / L buttons, then press ENTER button.
Your setting will be activated.
ON : Outputs DTS signals.
When your amplifier/decoder is compatible with DTS, set to “ON”.
OFF : No DTS signal is output.
When your amplifier/decoder is NOT compatible with DTS, set to
“OFF”.
OFF
PCM
ON
Dolby
Digital
ON
DTS OFF
OFF
Playing discs
udio
When playing a DVD-RW
disc recorded in VR mode
• If the audio source on a disc is
Dolby Digital format, set “Dolby
Digital” to “PCM” so that you
can switch to main (L), sub
audio (R), or a mix of both (L/R)
with your amplifier/decoder.
Settings for DTS (Default : OFF)
Original
ntrol
Note
TV Aspect
Disc Menu Language
Audio Language
Subtitle Language
Setup > Playback
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Digital Out
Parental Lock
Disc Menu Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Fast Forward with Audio
OFF
ON
OFF
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
• Dynamic Range Control function
is effective only with analog audio
connection.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
Setup > Playback
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
Digital Out
Parental Lock
Disc Menu Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
• Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
VCR functions
Fast Forward with Audio (Default : OFF)
Set to ON to output the sound during playback in fast forward of x2.
Changing the SETUP menu
Parental Lock
DVD
Editing
Dynamic Range Control (Default : ON)
Set to ON to compress the range between soft and loud sounds.
Setup > Playback
Recording
• Select a setting using K / L buttons, then
press ENTER button.
Your setting will be activated.
PCM : Convert the Dolby Digital into PCM
(2 channel).
When your amplifier/decoder is NOT compatible with Dolby Digital, set to “PCM”.
Stream : Outputs Dolby Digital signals.
When your amplifier/decoder is compatible with Dolby Digital, set to “Stream”.
Original
Getting started
B
Note
When playing disc with copyright protection
• If you select “Auto”, the sound
will be down sampled at 48kHz.
• If you select “96kHz”, no digital
sound will be output. Select
“Auto”, so that outputting
48kHz digital sound.
Connections
• Select a setting using K / L buttons, then
press ENTER button.
Your setting will be activated.
Auto
: Select “Auto” usually.
48kHz : If your amplifier/decoder is NOT compatible with 96kHz PCM, select “48kHz”.
96kHz sound will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible
with 96kHz PCM, select “96kHz”. 96kHz
sound will be output.
Original
Before you start
Audio setting (cont’d)
Digital Out
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
ON
ON
OFF OFF
5
Press SETUP button to exit SETUP menu.
91
Others Español
Dynamic Range Control
Changing the SETUP menu
Settings for Parental lock level
Some DVD-Video discs feature a Parental Lock level. Playback
will stop if the ratings exceed the levels you set, it will require
you to enter a password before the disc will playback.This feature prevents your children from viewing inappropriate material.
Press STOP button if you are playing a disc.
POWER
4
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
DVD
VCR
PAUSE
PLAY
1
5
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
3
4
Setup Menu
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L / { / B buttons, then press
ENTER button.
Option window will appear.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
DVD
4:3 Letter Box
All
English
Original
OFF
Digital Out
4
Dynamic Range Control
ON
Fast Forward with Audio
OFF
Select “Parental Lock” using K / L buttons, then press
ENTER button.
92
Note
• Parental lock function may
not be available to some
discs.
• With some DVDs, it may be
difficult to find if they are
compatible with parental lock.
Be sure to check if the
parental lock function operates in the way that you have
set.
• Record the password in case
you forget it.
Changing the SETUP menu
Before you start
Settings for Parental lock level (cont’d)
Parental Lock (Default : All)
Set the Parental Lock level.
Setup > Playback
TV Aspect
Disc Menu Language
Audio Language
Subtitle Language
4:3 Letter Box
All
English
TV Aspect
Original
OFF
Audio Language
DVD
Parental Lock
Disc Menu Language
Subtitle Language
Digital Out
Digital Out
Dynamic Range Control
ON
Dynamic Range Control
Fast Forward with Audio
OFF
Fast Forward with Audio
Getting started
A
4:3
All Letter Box
8
All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Change the parental level
using K / L buttons, then
press ENTER button.
Option window will appear.
Proceed to steps A or B.
Connections
Parental Lock
Setup > Playback
DVD
A password has not been set yet
Setup > Playback
DVD
TV Aspect
Yes
DVD
TV Aspect
Parental Lock
4:3
Password
All Letter Box
8- - - All
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
• Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
Recording
4:3
Letter Box
Change
AllPassword?
Yes
No
8
All
7
English
Disc Menu Language
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
Setup > Playback
B
A password has been set already
Setup > Playback
TV Aspect
Parental Lock
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
Setup > Playback
DVD
TV Aspect
4:3
Letter Box
Change
AllPassword?
Yes
No
8
Parental Lock
All
7
English
Disc Menu Language
6
Original
Audio Language
5
OFF
Subtitle Language
4
3
Digital Out
2
ON
Dynamic Range Control
1
Fast Forward with Audio
OFF
• If you select “No”, proceed
to Step 5.
Yes
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
DVD
4:3
Password
All Letter Box
8- - - All
7
English
6
Original
5
OFF
4
3
2
ON
1
OFF
Changing the SETUP menu
• Enter the current password
using Number buttons.
Setup > Playback
Change the password
Editing
Disc Menu Language
DVD
4:3
All Letter Box
Password
8
All
7* * * *
English
6
Original
5
OFF
4
3
2
ON
1
OFF
Playing discs
• If you select “No”, proceed
to Step 5.
• Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
5
Press SETUP button to exit SETUP menu.
Others Español
93
VCR functions
Note
• Press CLEAR/C.RESET button
to erase numbers entered
incorrectly.
• When you forget the password or you want to clear all
settings in Parental lock, enter
4,7,3,7 using Number buttons
in option window. Password
will be cleared and parental
levels will be set to All.
VCR functions
Playback
VCR
3
1
Press POWER button on the
remote control or the front
panel of the unit.
When you are playing a videotape, turn the TV on and be sure
to select the input to which the
unit is connected.
Press:
VCR
During playback, press
PAUSE F button.
Playback will pause and sound will
be muted.
Insert a prerecorded videotape, then press PLAY B button to begin playback.
POWER
REC MODE
REC SPEED
4
Press PLAY B button to
resume play.
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
2
4
DVD
VCR
PAUSE
3
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
5
Note
5
2
1
Press STOP C button to stop
playback.
6
Press STOP/EJECT C A button on the front panel of the
unit to eject the videotape.
• When a videotape without
record tab is inserted, the
unit will start playback automatically.
• Tracking will be automatically
adjusted upon playback.To
adjust the tracking manually,
press the CHANNEL K/L
buttons on the front panel of
the unit or CHK/CHL buttons on the remote control.
Recording and One-touch timer recording
Recording
First:
VCR
PQRS
VCR
7
TUV
WXYZ
8
9
SPACE
Before recording, make sure:
• The desired channel is selected
by pressing the number buttons
on the remote control or
CHANNEL K/L buttons on the
front panel of the unit.
• There is a videotape with a
record tab in the unit.
• The desired recording speed is
selected in SP (standard play) or
SLP (super long play) mode by
pressing REC MODE/REC SPEED
button on the remote control.
Recording speed:
Tape speed
Type of tape
SP mode
SLP mode
Recording/Playback Time
T60
T120
T160
1hour
2hours
2-2/3hours
3hours
6hours
8hours
• Stereo or SAP is selected. Refer
to page 21.
• Refer to page 34 for instructions
on timer recording.
94
VIDEO/TV
SLOW
0
1
DISPLAY
Press REC/OTR button to
begin the recording.
To temporarily stop recording or
to resume it, press PAUSE F button. After the unit has been in
Pause mode for 5 minutes, it will
stop automatically to protect the
videotape and the video head
from damage.
2
Press STOP button when the
recording is completed.
Accidental erasure prevention
To prevent accidental recording
on a recorded videotape,
remove its record tab.To
record on it later, cover the
hole with cellophane tape.
Record tab
DVD
VCR
PAUSE
1
PLAY
STOP
1
REC/OTR
SETUP
REC MONITOR
MENU/LIST TOP MENU
TIMER PROG.
2
ENTER
RETURN
Note
• To view one channel while
recording another
1) While you are recording on
the unit, press VIDEO/TV button.
2) At the cable box or satellite box, select the channel
you want to view.
If you have connected the
unit to a cable box or satellite
box, refer to “Connection to
a Cable Box or Satellite Box”
section on page 15.
VCR functions
One-touch timer recording
PLAY
VCR
VCR
During normal recording,
press REC/OTR button to
begin one-touch timer
recording.
You can select a fixed recording
time by pressing the REC/OTR
button repeatedly.
(0:30)
(1:00)
(8:00)
(7:30)
1
REC/OTR
SETUP
TIMER PROG.
1
ENTER
Note
When one-touch timer recording
is finished, the unit will turn off
automatically.
To change the recording length
during the one-touch timer
recording, press REC/OTR repeatedly until the desired length
appear.
Playing discs
Search
Index search
VCR
VCR
Press SEARCH MODE button
so that the index search
menu appears.
2
POWER
Press g/h buttons to
start index search.
If you want to go in the forward
direction, press g button.
If you want to go in the reverse
direction, press h button.
After index search, the VCR will
play the videotape automatically.
CURRENT PROGRAM
Beginning
of tape
Pro.1
Pro.2
01
Pro.3
ABC
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
7
01
02
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
3
PLAY
STOP
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Pro.5
CLEAR/C.RESET ZOOM
03
INDEX MARK
OPEN/CLOSE
DEF
SPACE
End
of tape
Pro.4
AUDIO
.@/:
1
REC/OTR
02
1
SEARCH
MODE
RETURN
SKIP
SKIP
CM SKIP
VCR functions
Enter the number of recordings you wish to skip using
Number buttons with in 30
seconds.
2
REC MODE
REC SPEED
Changing the SETUP menu
1
3
Editing
An index mark will be assigned at
the beginning of each recording
you make.You may skip to a specific marked point by following the
steps below.
First:
Recording
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
• The remaining recording time
will appear on the display panel
during an one-touch timer
recording. Press DISPLAY button to see it on the TV screen.
• You cannot pause a onetouch timer recording.
• If OTR is finished in VCR during
playback or REC mode in DVD, the
VCR will be in STOP mode and
the DVD keeps the current mode.
• Unlike a timer recording, you can
perform the following operations
during a one-touch timer recording.
- Turning the power off
- Using REC or STOP C buttons.
Getting started
1
STOP
(Normal recording)
Connections
This feature allows you to set the
recording length simply by pressing
REC/OTR button on the remote
control or the front panel of the unit.
First:
Before you start
Recording and One-touch timer recording (cont’d)
INDEX SEARCH
03
• Every time a videotape is
recorded, an index mark is
written on the videotape.
95
Others Español
Note
VCR functions
Search (cont’d)
Time search
POWER
VCR
This feature allows you to go to a
specific point on a videotape by
entering the exact amount of time
you wish to skip in order to reach
the point.
First:
TIME SEARCH
2:50
2
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
DEF
4
5
6
PQRS
TUV
WXYZ
8
9
7
OPEN/CLOSE
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
VCR
1
Press SEARCH MODE button
repeatedly so that the Time
search menu appears.
2
Enter your desired time to
skip using Number buttons
with in 30 seconds.
3
3
PLAY
Press g/h buttons to
start time search.
If you want to go in the forward
direction, press g button.
If you want to go in the reverse
direction, press h button.
After time search, the unit will play
the videotape automatically.
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
RETURN
CLEAR/C.RESET ZOOM
SEARCH
MODE
1
SKIP
SKIP
CM SKIP
Note
• These functions are not available during recording.
• Press STOP button to stop
the search.
• If the end of the videotape is
reached during a Search, this
unit will cancel the search and
rewind the videotape.
Other operations
VCR
VCR
First:
Fast forward:
When the unit is in stop mode, press g to fast forward the videotape.
Rewind:
When the unit is in stop mode, press h to rewind the videotape.
To cue or review picture during playback (Picture Search):
Press g/h buttons during playback.
Press it again and the unit will search in super high speed. (in the SLP mode only)
To freeze the picture on TV screen during playback (Still mode):
Press PAUSE F button. Each time you press the button, the picture will
be forwarded by one frame.
If the picture begins to vibrate vertically during the still mode, stabilize
the picture by pressing the CHANNEL K/L or CHK/CHL buttons.
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Counter Reset:
Press CLEAR/C.RESET button.
To playback in slow motion:
Press SLOW
button during playback or the still mode.
If the noise bars appear on the TV screen, you can reduce it by pressing
CHANNEL K/L or CHK/CHL buttons.
Automatic Rewind
When a videotape is played or fast forwarded to its end, the videotape
will rewind to the beginning, stop, and eject itself.
When you playback a videotape recorded in Hi-Fi stereo:
Press AUDIO button on the remote control to select Hi-Fi or MONO
for playback sound mode.
• If you have connected a stereo TV to this unit, select “Hi-Fi”.
• If you have connected a monaural TV to this unit, select “MONO”.
96
Note
• Still/Slow/Pause mode will be
automatically cancelled after 5
minutes to prevent damage to
the videotape and the video
head.
• To return to playback from
the Picture Search/Still/Slow
mode, press PLAY button.
Your Selection
Hi-Fi
MONO
Type of recorded tape
L-channel
R-channel
non Hi-Fi tapes
Monaural
Monaural
Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
L+R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Hi-Fi tapes
recorded second
audio program
Second audio Second audio Second audio
program
program
program
Others
Before you start
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and
restore proper operation.
Symptom
• Check that the AC power cord is connected securely.
• (In case of power failure) Check the braker.
There is no picture.
• Re-connect the connecting cord securely.
• The connecting cords are damaged.
• Check the connection to your TV (page 14).
• Check the RF output channel when you view a TV program
using RF connection.
• Switch the input selector on your TV (such as to "LINE1") so
that the signal from this unit appears on the TV screen.
TV program reception does not fill the
screen.
• Try to set the channels with "Auto Preset" in SETUP menu
(page 19).
• Select a channel of any TV program using the CH o / p buttons.
• Press VIDEO/TV button if necessary.
TV program pictures are distorted.
• Adjust TV antenna.
• Adjust the picture (see the TV's instruction manual).
• Place the unit and TV farther apart.
• Place the TV and any bunched antenna cables farther apart.
TV channels cannot be changed.
• Switch the input to TV.
• Connect the antenna cable correctly (page 14).
Playback picture is distorted.
• Keep the equipment which may cause electrical disturbances,
such as a cellular phone, away.
The playback picture or TV program from
the equipment connected through the
unit is distorted.
• If the playback picture output from a DVD player,VCR, or tuner goes
through the unit before reaching your TV, the copy-protection signal
applied to some programs could affect picture quality. Disconnect the
playback equipment in question and connect it directly to your TV.
There is no sound.
• Re-connect all connections securely.
• The connecting cord is damaged.
• Check the connections to the amplifier input.
• The input source setting on the amplifier is incorrect.
• The unit is in pause mode or in Slow-motion Play mode.
• The unit is in fast forward or fast reverse mode.
The channel cannot be changed from the
channel you are recording.
• Set the TV's input to "TV".
Nothing was recorded even though you
set the timer setting correctly.
• There was a power failure during recording.
• The internal clock of the unit stopped due to a power failure
that lasted for more than 30 seconds.
Reset the clock (pages 22-24).
• Disconnect the AC power cord from the AC outlet, and
connect it again.
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that was set
later or has priority.
Timer recording is not complete or did
not start from the beginning.
• The timer setting overlapped with another setting that was set
later or has priority (page 36).
• Disc space was not enough.
• Make sure indicator appears on the front display of this unit. If not,
press POWER button.
Getting started
Recording
Playing discs
• When static electricity, etc., causes the unit to operate
abnormally, unplug the unit and then plug it in again.
97
Others Español
The unit does not operate properly.
VCR functions
• Batteries are weak.
• There are obstacles between the remote and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote.
• Turn on the unit.
• The remote control is not pointed at the remote sensor on the unit.
• Press the DVD or VCR button, whichever you need. Then, try again.
• If above remedies do not solve the problem, please call the
Service Center for help.
Changing the SETUP menu
The remote control does not function.
Editing
Timer recording is impossible.
Connections
D
V
D
•
V
C
R
Remedy
The power does not turn on.
Others
Troubleshooting (cont’d)
Symptom
D
V
D
98
Remedy
There is no picture.
• The Setup Display appears. Press RETURN
button to turn
off the display.
• Check if the INTERLACE/PROGRESSIVE mode is set correctly
according to your TV. See page 14.
Picture noise appears.
• The disc is dirty or flawed.
• If the picture output signal from the unit passes through your VCR
to get to your TV, or if you are connected to a combination
TV/VIDEO player, the copy-protection signal applied to some DVD
programs could affect picture quality. If you still experience this
problem even when you connect the unit directly to your TV, try
connecting the unit to your TV's S-VIDEO input.
There is no sound.
• If the audio signal does not come through the DIGITAL OUT
(COAXIAL) jack, check the Audio Setup settings (pages 90-91).
• The disc is dirty or flawed.
Sound is noisy.
• The disc is dirty or flawed.
The disc does not play.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play certain discs (such as a CD-ROM) (page
43).
• The region code on the DVD VIDEO does not match the unit
(page 43).
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on for about two hours until the moisture
evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot
play the disc if it was not finalized (page 41).
Playback image freezes for a second.
• During the playback of two layered disc, picture may freeze for
a moment when the 1st layer switches to the 2nd layer. This is
not a malfunction.
The disc does not start playback from the
beginning.
• Resume play was activated (page 48). Press STOP C button
twice.
• You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first insert.
The unit starts playing from the disc
automatically.
• The DVD VIDEO features an auto playback function.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
• Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with the disc.
The language for the sound track cannot
be changed.
• Multilingual tracks are not recorded on the DVD VIDEO,
DVD-R or DVD-RW being played.
• The DVD VIDEO prohibits the changing of the language for the
sound track.
• Try changing the language using the DVD VIDEO's menu.
The subtitle language cannot be changed
or turned off.
• Multilingual subtitle are not recorded on the DVD VIDEO.
• The DVD VIDEO prohibits changing of the subtitles.
• Try changing the subtitle using the DVD VIDEO's menu.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD VIDEO being played.
• You are trying to change the angles when
icon does not
appear on the TV screen (page 58).
• The DVD VIDEO prohibits changing angles.
• Try changing the angle using the DVD VIDEO's menu.
Recording does not stop immediately
after you press STOP C button.
• It will take a few seconds for the unit to input disc data before
recording can stop.
Recording does not start immediately
after you press REC/OTR button.
• An unused DVD-R or DVD-RW was inserted. It takes a while
for the unit to automatically format a DVD-RW.
The disc tray does not open when you
press OPEN/CLOSE A button.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
Others
Symptom
The disc tray does not open when you
press OPEN/CLOSE A button.
"Repairing" appears on the display.
Repairing
Picture noise appears.
The tape does not play.
Recording does not start immediately
after you press REC/OTR button.
The remote control does not function.
The motor rotates even when playback /
recording is stopped.
Disc Error
--- Please eject the disc. --Playback feature may not be
available on this Disc.
Cause
Solution
Insert the standardized disc which
bear the marks on page 43.
Insert the disc with the labeled side
facing up.
Region Error
--- Please eject the disc. --Playback is not authorized in your
region.
Playback is not authorized
in the region of the DVD-Video
disc which you inserted in the unit.
Insert the DVD-Video disc with
region codes 1 or ALL.
Parental Lock On
--- Please eject the disc. --The current selected parental level
Prohibits playback.
The current selected parental
level in the SETUP Menu
prohibits playback.
Check the "Parental Lock" setting
(pages 92-93).
The recording function encountered
the copy prohibited program.
You cannot record copy prohibited
programs.
Recording Error
This program is not
recordable in Video mode.
You are trying to record the copyonce program onto the DVD-RW
disc in Video mode.
Set "DVD-RW Recording Format"
to "VR mode" (page 29).
Recording Error
Can not record on this disc.
You are trying to record onto the
disc which is unrecordable, or the
disc status is unable to record.
The disc is dirty.
The disc is damaged.
Insert the recordable disc, and
ensure the disc status satisfies the
recording requirements (pages 27-28).
Clean the disc with a cleaning cloth.
Replace the disc.
Recording Error
This program is not allowed to
be recorded on this disc.
You are trying to record the copyonce program onto the DVD-RW
disc which is not compatible with
CPRM.
Insert the DVD-RW disc
(ver.1.1 compatible with CPRM).
Recording Error
This disc is protected and not
recordable.
You are trying to record on to the
protected disc which is set in the
Disc Setting Menu.
Release the disc protect setting
in the Disc Setting menu (page 42).
Recording Error
Disc is full.
(No area for new recording)
You are trying to record onto
the disc which has no space
for recording.
Insert the recordable disc with
enough recording space.
Changing the SETUP menu
VCR functions
Others Español
99
Editing
Recording Error
This program is not allowed
to be recorded.
Playing discs
Unplayable disc is inserted
in the unit.
The disc is upside down.
Recording
Error message
Getting started
V
C
R
Connections
D
V
D
Remedy
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
• If there is a power failure or unplugging during recording,
finalizing, formatting or editing, a Repairing process will begin
automatically just after turning the unit on again.
It may take several minutes up to about four hours.
• Head cleaning for VCR may be necessary.
Refer to “AUTO HEAD CLEANING”.
• Adjust tracking control for better picture by pressing
CHANNEL (o / p) buttons on this unit or CH ( o / p)
buttons while you are playing a videotape.
• No videotape is inserted.
• Make sure the videotape has a record tab when you record to a
videotape. If needed, cover the hole with cellophane tape.
• Check if a videotape is in this unit.
• The motor may rotate for the duration of approximately 5
minutes for efficient operation. This is not a malfunction.
Before you start
Troubleshooting (cont’d)
Others
Troubleshooting (cont’d)
Error message
Cause
Solution
Recording Error
You cannot record more
than 99 titles on one disc.
(The maximum is 99)
You are trying to record onto the
disc on which the number of
recording titles comes up to the
maximum (99).
Delete unnecessary titles
(pages 61, 65, 74).
Recording Error
You cannot record more than
999 chapters on one disc.
(The maximum is 999)
You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (999).
Delete unnecessary chapter
markers (pages 69, 78).
This disc has no space to write
the Control Information when
recording or deleting contents.
Delete unnecessary titles
(pages 61, 65, 74).
Recording Error
You cannot record on this disc
as Control Information is full.
When editing has been repeatedly
performed, the control Information
area may come up to be full even
the recording area has enough space.
Recording Error
You cannot record on the
disc as Power Calibration
Area is full.
Recording Error
This disc is already finalized.
When recordings are performed
repeatedly onto an unstable disc,
this area may come up to be full.
Insert a new disc.
Every time you insert a disc for
recording, the disc's working area
will be taken up. And if you repeat
this frequently, it will be used up
sooner and you may not be able
to record full 99 titles.
You are trying to record onto
the disc already finalized.
Release the finalizing for this disc
(page 41).
* If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the error
description, and contact a Sharp Authorized Service Center for inspection. (See Service Information on page 103.)
RF converter output
You can watch the TV programs with
the tuner of the unit. (Usually channel
3 or 4 of the TV is available for the
RF converter setting.) Be sure to connect the unit to a TV using the Round
Coaxial cable. Refer to page 14.
1
Select channel 3 on your TV.
• Be sure that the unit is in DVD
mode.
2
Press VIDEO/TV button on
the remote control.
• If noise appears, change the RF
output channel of the unit to CH
4 by pressing VIDEO/TV button
for 3 seconds.The RF output
channel will alternate between
CH3 and CH4 as follows.
100
1
2
3
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
7
8
9
SPACE
CH
POWER
VCR
DVD
AUDIO
SLOW
.@/:
1
ABC
2
3
PAUSE
GHI
JKL
MNO
4
5
6
PQRS
TUV
WXYZ
8
9
0
DISPLAY
REC MODE
REC SPEED
OPEN/CLOSE
VIDEO/TV
for more than
3 seconds
7
DEF
SPACE
CH
VIDEO/TV
SLOW
0
DISPLAY
DVD
VCR
PAUSE
PLAY
3 seconds
STOP
(RF ON) CH4
3 seconds
(RF ON) CH3
3 seconds
(RF ON) CH4
3 seconds
• Changing the RF output channel
is available only when the unit is
in DVD mode.
REC/OTR
SETUP
TIMER PROG.
ENTER
REC MONITOR
MENU/LIST TOP MENU
CLEAR/C.RESET ZOOM
SEARCH
MODE
CM SKIP
RETURN
SKIP
SKIP
2
Others
VCR functions
Others Español
101
Changing the SETUP menu
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Editing
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Playing discs
Code
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6247
6265
5247
6258
6266
6367
6459
6461
Recording
Language
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Getting started
Code
6159
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
Connections
Language
(Afan) Oromo
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Before you start
Language code
Others
Glossary
Analog audio
An electrical signal that directly
represents sound. Compare this
to digital audio which can be an
electrical signal, but is an indirect
representation of sound. See also
Digital audio.
Aspect ratio
The width of a TV screen relative
to its height. Conventional TVs are
4:3 (in other words, the screen is
almost square); widescreen models
are 16:9 (the screen is almost
twice as wide as it is high).
Chapter
Just as a book is split up into several chapters, a title on a DVD
disc is usually divided into chapters. See also Title.
Component video output
Each signal of luminance(Y) and
component(PB/CB, PR/CR) is independent to output so that you can
experience picture color as it is.
Also, due to compatibility with
progressive video (480p), you can
experience higher-density picture
than that in interlace (480i).
CPRM
(Content Protection for
Recordable Media)
CPRM is a copy protection system with scramble system regarding the recording of “copy-once”
broadcast programs (e.g. some
satellite broadcasts).
Digital audio
An indirect representation of
sound by numbers. During recording, the sound is measured at discrete intervals (44, 100 times a
second for CD audio) by an analog-to-digital converter, generating
a stream of numbers. On playback,
a digital-to-analog converter generates an analog signal based on
these numbers. See also Sampling
frequency and Analog audio.
102
Dolby Digital
The system to compress digital
sound developed by Dolby
Laboratories. It offers you sound
of stereo(2ch) or multi-channel
audio (up to 5.1ch).
DTS (Digital Theater System)
DTS is a 5.1channel surround
sound system, but it is different
from Dolby Digital.The formats
were developed by Digital Theater
System, Inc.
Finalize
To make DVD discs, which have
been recorded on, possible to play
in DVD players.With this unit, it is
possible to finalize DVD-RW/
DVD-R discs.
MP3 (MPEG Audio Layer 3)
MP3 is a method of compressing
files.You can copy MP3 files on
CD-RW/R discs from the computer and play the files on this unit.
PCM
(Pulse Code Modulation)
The most common system of
encoding digital audio, found on
CDs and DAT. Excellent quality,
but requires a lot of data compared to formats such as Dolby
Digital and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and
AV amplifiers with digital inputs,
this unit can convert Dolby Digital
and MPEG audio to PCM. See also
Digital audio.
Playlist
From this list you can play contents of a disc as your desired
order or in sequence. Also it is
allowed to search a specific scene
directly.
Progressive Scan (480p)
A type of display that does not
split each frame into fields, and
instead scans directly through all
the scanlines of each frame in
order. Progressive Scan provides
less flickering and higher image
resolution than traditional (480i)
TV signals. Refer to page 14 for
instructions on selective
Progressive Scan mode.
Regions code
Regions associate discs and players with particular areas of the
world.This unit will only play discs
that have compatible region
codes.You can find the region
code of your unit by looking on
the rear panel. Some discs are
compatible with more than one
region (or all regions).
Sampling frequency
The rate which sound is measured
by a specified interval to turn into
digital audio data.The numbers of
sampling in one second defines as
sampling frequency.The higher the
rate, the better the sound quality
as possible as it is.
SAP
(Secondary Audio Program)
Sub-audio channel which is delivered separately from main-audio
channel.This audio channel is used
as an alternate in bilingual broadcasting.
S-Video output
It delivers independently each signal of color(C) and luminance(Y)
to TV as video signals, so that
higher-quality picture will be
gained.
Title (DVD only)
A collection of chapters on DVD
disc. See also chapter.
Track
Audio CDs use tracks to divide
up the content of a disc.The DVD
equivalent is called a chapter. See
also Chapter.
Others
General
System
Recording format
Recordable discs
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
Video Recording format (DVD-RW only), Video format (DVD-RW, DVD-R)
DVD-ReWritable, DVD-Recordable
13.5MHz
MPEG
48kHz
Dolby Digital
2-13ch
14-69ch
C1-C125ch
Built-in VHF converter
VHF channel 3 or 4
VHF/UHF set 75Ω
Input 1 (rear), 2 (front)
1 Vp-p (75Ω)
RCA jack
Playing discs
1 Vp-p (75Ω)
RCA jack
Input 1 (rear), 2 (front)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
Editing
Input/Output
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
500 mVp-p (75Ω)
RCA jack
Service Information (For the U.S.)
For the location of the nearest Sharp Authorized Service Center, or to obtain product literature, accessories,
supplies or customer assistance, please call 1-800-BE-SHARP (1-800-237-4277) or visit SHARP’s website
(http://www.sharpusa.com).
103
Others Español
Note:
The specifications and design of this product are subject to change without notice.
VCR functions
Y: 1.0 Vp-p (75Ω), PB/CB, PR/CR: 0.7 Vp-p (75Ω)
RCA jacks
Input 1 (rear), 2 (front) L/R
2V rms (47kΩ)
RCA jacks
Output 1,2 L/R
2V rms (47kΩ)
RCA jacks
Changing the SETUP menu
VHF/UHF antenna input/output terminal
Video input
Input level
Jacks
Video output
Output level
Jacks
S-Video input
Y (Iuminance) - Input level
C (color) - Input level
Jacks
S-Video output
Y (Iuminance) - Output level
C (color) - Output level
Jacks
Component video output
Output level
Jacks
Audio input
During audio input
Jacks
Audio output
During audio output
Jacks
Digital audio output
Output level
Jacks
Recording
Tuner
Receivable channels
VHF
UHF
CATV
RF Converter
Converter output
Getting started
Recording
Connections
VCR video heads
Power requirements
Power consumption
Weight
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV format
DVD-Video, DVD-RW/R, CD-DA, CD-RW/R,
Video Cassette Tape
Four heads
AC120 V, 60 Hz
37 W (standby: 4.3 W)
9.5 lbs ( 4.3 kg )
17 1/8" x 3 15/16" x 10 1/4" (435 x 100 x 261 mm)
41Fº to 104Fº (5ºC to 40ºC)
5% to 85% (no condensation)
NTSC
Before you start
Specifications
Español
Precaciones
Para futura referencia, anote los números de modelo y de serie (indicados en la parte posterior esta unidad) en el espacio provisto.
No. de modelo:
No. de serie:
AVISO: PARA REDUCIR EL RIESGO DE INCENDIO O ELECTROCHOQUE NO
EXPONGA ESTE APARATO A LA HUMEDAD.
PRECAUCIÓN: PARA EVITAR DESCARGAS ELÉCTRICAS, HAGA QUE LA
PALETA ANCHA DEL ENCHUFE COINCIDA CON LA RANURA ANCHA E
INTRODÚZCALA HASTA EL FONDO.
PRECAUCION
PELIGRO DE DESCARGA ELECTRICA NO
ABRIR DECLARACIÓN DE CONFORMIDAD
Este símbolo previene al usuario del voltaje
aislado dentro de la unidad que puede provocar
descargas eléctricas peligrosas.
PRECAUCION:
TPARA REDUCIR EL RIESGO DE DESCARGA ELECTRICA, NO QUITE LA CUBIERTA. EL USUARIO NO
DEBERA DAR NINGUN TIPO DE SERVICIO A NINGUNA PARTE INTERNA. DEBERA SER REALIZADO SOLO
POR PERSONAL DE SERVICIO CALIFICADO.
Este símbolo advierte al usuario que existen
instrucciones de operación y de mantenimiento en la literatura incluida en esta unidad.
“ADVERTENCIA—Las reglas de la FCC (Comisión Federal de Comunicaciones) estipulan que cualquier modificación o cambio a este equipo no aprobado expresamente por
el fabricante podrá anular la autorización del usuario para operar este equipo”.
Este dispositivo cumple con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). La operación
se encuentra sujeta a las dos condiciones siguientes:
(1) Este dispositivo no debería producir interferencias perjudiciales, y
(2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las que puedan producir una operación
indeseable.
INFORMACION
Este equipo se ha sometido a todo tipo de pruebas y cumple con las normas establecidas para dispositivo digital de
Clase B, de conformidad con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). Estas reglas
están diseñadas para asegurar una protección razonable contra interferencias perjudiciales en las instalaciones residenciales. Este equipo genera, utiliza y puede emitir energía de radiofrecuencia y, si no se instala y utiliza debidamente, es
decir, conforme a las instrucciones, podrían producirse interferencias perjudiciales en las radiocomunicaciones. Sin
embargo, no se garantiza que estas interferencias no se produzcan en una instalación determinada. Si este equipo ocasiona interferencias en la recepción de radio o televisión, lo cual puede comprobarse con sólo apagar y encender el
equipo, intente corregir el problema mediante una o una combinación de las siguientes medidas:
—Reoriente la antena receptora o cámbiela de lugar.
—Aumente la separación entre el equipo y el receptor.
—Enchufe el equipo a una toma de corriente situada en un circuito distinto del receptor.
—Consulte a su distribuidor o a un técnico experto en radio/televisión.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.
PRECAUCION:
ESTA UNIDAD HA SIDO CLASIFICADA COMO PRODUCTO CLASS 1 LASER.
EL USO DE MANDOS O AJUSTES O LA REALIZACION DE PROCEDIMIENTOS DISTINTOS DE LOS INDICADOS EN
LA PRESENTE IMPLICA EL RIESGO DE EXPOSICION A UNA RADIACION PELIGROSA.
COMO LOS RAYOS LASER UTILIZADOS EN ESTA UNIDAD PUEDEN RESULTAR PERJUDICIALES PARA SUS OJOS,
NO INTENTE DESARMAR EL GABINETE. SOLICITE EL SERVICIO UNICAMENTE A PERSONAL CUALIFICADO.
104
Español
Importantes Medidas de Seguridad y Precauciones
unidad de descarga de la antena, conexión a los electrodos tierra,
y requerimientos de los electrodos tierra (Fig. A).
FIGURA A
EJEMPLO DE CONEXIÓN A TIERRA DE ANTENA DE
ACUERDO CON EL CÓDIGO ELÉCTRICO NACIONAL.
CABLE DE COBRE
PARA LA ANTENA.
ABRAZADERA
DE LA ANTENA.
UNIDAD PARA LA DESCARGA
DE LA ANTENA
(NEC SECCIÓN 810-20)
EQUIPO PARA EL
SERVICIO
ELÉCTRICO
S2898A
Playing discs
Editing
Changing the SETUP menu
VCR functions
Others Español
105
Recording
15) Tormentas eléctricas - Como medida adicional de protección
durante tormentas eléctricas, o cuando el producto permanezca sin uso durante períodos prolongados de tiempo,
desconéctelo del tomoacorriente mural y desconecte la antena
o sistema de cable. Esto evitará que el grabador de videocassettes resulte dañado por tormentas eléctricas o sobretensiones
en la línea de alimentación.
16) Líneas de alimentación - Un antena exterior no debe ser instalada en la cercanía de líneas de alimentación aéreas ni de otros
circuitos de potencial para iluminación eléctrica, o donde
pueda caerse y hacer contacto con tales líneas o circuitos. Al
instalar un sistema de antena exterior, enta mucho cuidado de
no tocar tales líneas o circuitos de alimentación, ya que el contacto con ellos podría será fatal.
17) Sobrecarga - No sobrecargue los tomacorrientes murales ni los
cables de extensión, ya que esto podría causar incendios o
descargas eléctricas.
18) Entrada de objetos y líquidos - Nunca introduzca objetos de
ningún tipo por las aberturas de sete producto, ya que pordría
tocar peligrosos puntos de alta tensión o cortocircuitar partes,
provocando incendios o descargas elécticas. Nunca derrame
ningún tipo de líquido sobre el producto.
19) Servicio - No intente reparar el producto usted mismo; al abrir
o desmontar las cobiertas usted se expondrá a alta tensión y a
otros peligros. Solicite todo servicio a personal calificado.
20) Daños que requieran reparación - En los siguientes casos,
desconecte el producto del tomacorriente mural y llame a un
técnico de servicio calificado:
a) Cuando el cable de alimentación o la clavija estén dañados,
b) Si se ha derramado líquido sobre la unidad, o si algún objeto ha caído dentro del producto,
c) Si el producto ha sido expuesto a la lluvia o al agua,
d) Cuando a pesar de haber sebuido las instrucciones de
operación, el producto no funcione normalmente. Ajuste
solamente los controles mencionados en el manual de
instrucciones; el ajuste incorrecto de otros controles podrá
causar daños a la unidad, la que por lo general requerirá de
un prolongado trabajo de reparación (por un técnico calificado) para que sus condiciones normales de operación
puedan ser restablecidas,
e) Si el producto se ha caído o si el gabinete se ha dañado.
f) Cuando el producto muestre un cambio notorio en su
rendimiento.
21) Piezas de requesto - Cuando sea necesario reemplazar piezas,
asegúrese de que el técnico de servicio emplee las piezas de
requesto especificadas por el fabricante, o piezas que tengan
las mismas características que las piezas originales. Las sustituciones no autorizadas podrán causar incendios, descargas
eléctricas y otoros problemas.
22) Revisión de seguridad - Al finalizar cualquier servicio de mantenimiento o reparación de este producto, solicítele al técnico
que efectúe comprobaciones de seguridad para determinar si el
producto se encuentra o no en condiciones óptimas de
operación.
23) Calor - Este producto debe colocarse fuera del alcance de
fuentes de calor tales como radiadores, rejillas de calefacción,
estufas o cualquier otro producto destinado a producir calor,
incluyendo los amplificadores.
Getting started
CÓDIGO DE NEC NATIONAL ELECTRIC
CONDUCTORES TIERRA
(NEC SECCIÓN 810-21)
ABRAZADERA A TIERRA.
SISTEMA DE ELECTRODOS PARA EL
SUMINISTRO DE TOMA A TIERRA
(NEC ARTÍCULO 250, PARTE H)
Connections
1) Lea las instrucciones - Lea detenidamente todas las instrucciones de seguridad y operación antes de usar el producto.
2) Conserve las instrucciones - Conserve las instrucciones de
seguridad y operación para consultas futuras.
3) Respete las advertencias - Observe estrictamente todas las
advertencias impresas en el producto y las incluidas en el
manual de instrucciones.
4) Siga las instrucciones - Siga todas las instrucciones de operación.
5) Limpieza - Desconecte el producto del tomacorriente mural
antes de limpiarlo. No use limpiadores líquidos ni aerosol.
Use un paño húmedo para la limpieza del producto.
6) Enchufes - No use enchfes no recomendados por el fabricante
del producto, ya que podría ser peligroso.
7) Agua y humedad - No use este producto cerca del agua, por
ejemplo, cerca de una bañera o lavamanos, cerca del fregadero de la cocina o lavandería, en un piso mojado, cerca de
una piscina, etc.
8) Accesorios - No instale este producto en un carro, soporte,
trípode o mesa inestables. El grabador de videocassettes
podría caerse, causando serias lesiones a un niño o adulto,
resultando también severamente dañado. Uselo sólo el un
carro, soporte, trípode o mesa recomendados por el fabricante, o vendidos con el producto. Toda instalación del producto deberán hacerse de acuerdo a las instrucciones del fabricante, empleando los accesorios de instalación recomendados por el mismo.
ADVERTENCIA SOBRE EL USO
DE CARROS PORTÁTILES
9) La combinación de producto y
carro debe ser movida con cuidado. Las detenciones bruscas, la
fuerza excesiva y las superficies
disparejas podrán hacer que el producto y el carro se vuelquen.
10) Ventilación - El gabinete del producS3125A
to tiene renuras y aberturas de ventilación que garantizan el funcionamiento confiable del producto,
evitando que se recaliente. Estas aberturas no deberán ser bloquear las aberturas, nunca setúe el grabador de videocassettes
encima de una cama, sofá, alfombra u otra superficie similar. El
grabador de videocassettes no debe ser instalado en un mueble
emportado, como una repisa para libros o bastidor, a menos que
se pueda garantizar una ventilación adecuada, o cuando las
instrucciones del fabricante así lo especifiquen.
11) Alimentación - Este grabador de videocassettes sólo debe ser
operado mediante el tipo de fuente de alimentación especificado
en la etiqueta indicadora. Si no seta seturo del tipo de fuente de
alimentación que tiene en su casa, consulte a su distribuidor o a
la compañía de electricidad local En el caso de grabador de
doseñados para funcionar a pilas o con otras fuentes de alimentación, consulte el manuel de instrucciones respectivo.
12) Conexión a tierra o polarización - Este producto está equipado con una clavija polarizada de corriente alterna (una clavija que tiene una espiga más ancha que la otra). Esta clavija
solamente pordá ser insertada en el tomacorriente en una sola
dirección. Esta es una medida de seguridad. Si no puediera
insertar completamente la clavija en el tomacorriente, vuelva
a intentarlo invirtiendo la clavija. Si aún no fuera posible
insertar la clavija, tome contacto con un electricista para que
repare su tomacorriente obsoleto . No modifique las características de seguridad de la clavija polarizada.
13) Protección del cable de alimentación - Los cables de alimentación deberán ser tendidos de manera tal que la probabilidad de que sean pisados o aplastados por otros objetos sea
mínima. Preste especial atención a las clavijas de los cables, a
los receptáculos, y al punto por donde salen del producto.
14) Conexión Tierra de una Antena Exterior: Si una antena exterior o
sistema de cable es conectado al aparato de vídeo, asegúrese de
que la antena o el cableado tenga conexión tierra para conseguir
de esta manera una protección contra voltajes no deseados y cargas estáticas. El artículo 810 del Código de Electricidad Nacional
ANSI/NFPA número 70, proporciona información acerca de la
manera adecuada de conexiones a tierra de la estructura del mástil
y la estructura soporte, sobre la unidad del cable del interior de
cobre de antena, tamaño de los conductores tierra, ubicación de la
Before you start
Precaciones (cont.)
Español
Fácil grabación de DVD
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.
Nota:
Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.
Paso 1: Elija un tipo de disco
Paso 2:Coloque un disco en blanco
Mando a distancia
Puede elegir entre distintos tipos de discos DVD
grabables. Elija un tipo de disco DVD grabable de
acuerdo con sus necesidades de
reproducción/grabación.Vea los "tipos de discos
DVD" en la parte inferior de esta página para más
detalles sobre las diferencias entre los distintos
medios compatibles.
Este grabador de DVD puede grabar los siguientes tipos de discos.
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
4
5
6
POWER
1
OPEN/CLOSE
2
Para abrir
CH
Para
encender
4.7
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
DEF
2
3
GHI
JKL
MNO
POWER
* Esta unidad no puede grabar en los discos siguientes.
• DVD-RW Ver 1.2 / 2-4x compatible con CPRM
• DVD-R General Ver 2.0 / 8x
Por ejemplo, cuando desea grabar repetidamente
en el mismo disco o cuando desea editar el disco
después de grabar, seleccione el disco de tipo
regrabable DVD-RW.
Cuando desea guardar grabaciones sin alterarlos,
un DVD no regrabable DVD-R puede ser más
conveniente.
OPEN/CLOSE
3
Para cerrar
CH
Cargando
Esta operación puede
demorar en reconocerse.
Tipos de disco DVD
Formato del disco
.
Coloque el disco en el
grabador. Haga el formato del
disco del menú SETUP, existen los formatos de video
(modo de Video) o de
grabación de video (modo
VR) según el tipo de disco
colocado. Esto es necesario
para preparar el disco para
grabación.Vea los detalles en
las páginas 29-30.
Al formatear, todo el contenido de ese disco se
borarán.
• La unidad empieza a formatear automáticamente
cuando se inserta un disco
no usado.
: Más adecuado
: Puede utilizar
: Algunas funciones son limitadas
Desea
DVD-RW VR
: No puede utilizar
DVD-RW Video
DVD-R
DVD-RW VR
DVD-RW Video
DVD-R
¿Regrabable?
Sí
Sí
No
Puede crear capítulos a intervalos fijos (auto.)
Sí
Sí
Sí
Puede crear capítulos donde desee (manual)
Sí
No
No
Puede grabar imágenes de tamaño 16:9
Sí
Sí
Sí
Puede grabar un programa de Copia-una-vez
Sí
No
No
Grabar programas de TV
Volver a utilizar borrando partes no deseadas
Editar las grabaciones
Editar/grabar de equipos conectados
Copiar discos para distribución
*1
Reproducir en otro equipo de DVD
*1
Detalles
Grabación
Edición
*1
106
Puede hacer funciones de edición básica
Sí
Sí
Sí
Puede hacer funciones de edición avanzadas (edición de lista a reproducir)
Sí
No
No
El DVD-RW (modo VR) sólo puede reproducirse
en equipos de DV compatibles con VR.
Nota:
Para más detalles sobre las funciones anteriores y las
limitaciones implícitas, lea las explicaciones en este manual.
Español
Paso 3: Seleccione la
velocidad de
grabación
Para seleccionar el
modo DVD
Paso 5: Grabe en
discos
DVD
PQRS
7
POWER
REC MODE
REC SPEED
AUDIO
OPEN/CLOSE
POWER
GHI
AUDIO
2
5
6
PQRS
TUV
WXYZ
7
8
9
SPACE
2
3
0
JKL
MNO
5
6
TUV
WXYZ
8
9
SPACE
CH
VCR
DISPLAY
VCR
VIDEO/TV
SLOW
DVD
VCR
PAUSE
DEF
CH
PLAY
VIDEO/TV
STOP
REC/OTR
SLOW
DVD
SETUP
TIMER PROG.
ENTER
REC MONITOR
PAUSE
MENU/LIST TOP MENU
VIDEO/TV
RETURN
SLOW
0
2
4
DEF
4
DISPLAY
3
MNO
ABC
PQRS
7
OPEN/CLOSE
2
JKL
9
Getting started
.@/:
1
REC MODE
REC SPEED
ABC
GHI
WXYZ
8
0
DISPLAY
.@/:
1
TUV
SPACE
Connections
1
Paso 4: Seleccione
el canal
deseado
DVD
PAUSE
1
Para seleccionar la
velocidad de grabación
CH 1
Recording
I
SP 2:01 Rem.
Sugerencia 1: Reproduzca el contenido grabado
Inicio de grab.
Parada/inicio
Título 1
Parada grab.
Título 2
¿Qué son títulos y capítulos?
El contenido de un disco DVD se divide generalmente en
títulos. Los títulos pueden dividirse a su vez en capítulos.
Paso 6: Pare la
grabación
Capítulo 1 Capítulo 2 Capítulo 3 Capítulo 1 Capítulo 2
SPACE
Playing discs
Puede seleccionar el título que desea reproducir de
un menú indicado y empiece a reproducir inmediatamente. El contenido grabado se puede acceder
fácilmente con un simple procedimiento de elegir
un título en un capítulo en la pantalla del menú.
Before you start
Fácil grabación de DVD (cont.)
SLOW
0
Sugerencia 2: Edite el disco grabado
Puede editar lo siguiente de la lista de títulos.
VCR
DVD
PAUSE
Editing
La edición de discos es fácil. Esta unidad ofrece convenientes funciones de edición que sólo son posibles con discos DVD-R/RW.
DISPLAY
PLAY
STOP
REC/OTR
SETUP
REC MONITOR
TIMER PROG.
ENTER
Changing the SETUP menu
• Poniendo nombres en títulos
• Seleccionando imágenes para índices (modo VR)
• Seleccionando/borrando marcadores de capítulos
• Borrado de partes de títulos o escenas (modo VR)
Title Delete: Esto borra permanentemente una escena completa del disco.
Scene Delete: Esto permite que el usuario edite dentro de una escena específica
(anuncios comerciales, por ejemplo).
Original y Playlist (modo VR)
58%
Escrit de datos
Puede editar las grabaciones en la lista a reproducir sin cambiar las grabaciones
originales. Cualquier lista a reproducir no ocupa mucho espacio en el disco.
VCR functions
¿Qué significa "Original" o "Playlist"?
A lo largo de este manual encontrará Original y Playlist que se refieren a las
grabaciones reales y la versión editada.
• La grabación Original se refiere a la grabación real en el disco.
• El Playlist se refiere a la versión editada del disco; cómo se va a reproducir la versión Original.
Finalización de un disco
Esta operación puede
demorar en completarse.
107
Others Español
• Esto permitirá que un disco que se grabe en nuestra unidad pueda ser reproducido en un
reproductor DVD diferente. Un disco sin finalizar no se podrá reproducir en otro reproductor.
• Después de finalizar un disco, si la grabación se hizo en el modo de vídeo,
usted no podrá editar ninguna información que se encuentre en ese disco.
• Si ha grabado en el modo VR en un disco DVD-RW, la edición podrá
realizarse incluso después de la finalización.
Español
Reproducción con videograbadora
VCR
3
1
Presione el botón POWER en
el mando a distancia o el
panel frontal de la unidad.
Cuando reproduzca una cinta,
conecte el TV y asegúrese de
seleccionar la entrada donde se
conecta la unidad.
Presione:
VCR
2
Coloque una cinta pregrabada y presione el botón PLAY
B para empezar la reproducción.
Durante la reproducción, presione el botón PAUSE F.
Se hará una pausa de reproducción y se silenciará el sonido.
POWER
REC MODE
REC SPEED
AUDIO
.@/:
1
ABC
2
3
GHI
JKL
MNO
4
5
6
TUV
WXYZ
8
9
PQRS
7
OPEN/CLOSE
DEF
SPACE
CH
VIDEO/TV
SLOW
0
4
Presione el botón PLAY B
para continuar la reproducción.
DISPLAY
2
4
DVD
VCR
PAUSE
3
PLAY
STOP
REC/OTR
REC MONITOR
SETUP
TIMER PROG.
5
ENTER
5
Presione el botón STOP C
para detener la reproducción.
6
Presione el botón
STOP/EJECT C A en el panel
frontal de la unidad para
expulsar la cinta.
108
1
Nota
• Cuando se coloca una cinta
sin la lengüeta de grabación, la
unidad empezará a reproducir
automáticamente.
• El seguimiento se ajustará
automáticamente para la
reproducción. Para ajustar
manualmente el seguimiento,
presione los botones CHANNEL K/L en el panel frontal
de la unidad o los botones
CHK/CHL en el mando a
distancia.
Español
Before you start
Grabación y grabación con temporizador de un toque (VCR)
Grabación
VCR
VCR
6
WXYZ
8
9
SPACE
CH
VIDEO/TV
SLOW
0
1
DISPLAY
Presione el botón REC/OTR
para empezar la grabación.
Para detener temporalmente la
grabación o continuarla, presione
el botón PAUSE F. Después de
que la unidad haya estado en el
modo de pausa durante 5 minutos, se detendrá automáticamente
para proteger al cinta y el cabezal
de video contra cambios.
2
Prevención contra borrado accidental
Lengüeta de
grabación
1
PLAY
STOP
1
REC/OTR
SETUP
TIMER PROG.
2
ENTER
REC MONITOR
Nota
• Para ver un canal mientras
graba en otro
1) Mientras está grabando en
la unidad, presione el botón
VIDEO/TV.
2) En la caja de cable o caja
de satélite, seleccione el canal
que desea ver.
Si se conectó la unidad a una
caja de cable o caja de
satélite, consulte la sección de
"Connection to a cable box
or satellite box" en la página
15.
Grabación con temporizador de un toque (OTR)
PLAY
VCR
STOP
VCR
1
REC/OTR
REC MONITOR
SETUP
TIMER PROG.
1
ENTER
(7:30)
Cuando termina la grabación con
temporizador de un toque, la
unidad se desconectará automáticamente.
Para cancelar la grabación con
temporizador de un toque dentro
del tiempo especificado, presione
el botón STOP C.
Nota
109
Others Español
• El tiempo de grabación remanente aparecerá en la pantalla durante una grabación
con temporizador de un toque.
Presione el botón DISPLAY para
que aparezca en la pantalla de TV.
• No puede hacer una pausa en una
grabación con temporizador de un toque.
• Si se termina el OTR en la
videograbadora durante el modo
de reproducción o REC en DVD,
la videograbadora estará en el
modo STOP y la DVD se
mantiene en el modo actual.
• A diferencia de una grabación con temporizador, durante una grabación con
temporizador de un toque usted puede
realizar las operaciones siguientes.
- Desconectar la alimentación
- Utilizar los botones REC o
STOP C.
VCR functions
Durante la grabación normal,
presione el botón REC/OTR
para empezar la grabación
con temporizador de un
toque.
Puede seleccionar un tiempo de
grabación determinado presionando repetidamente el botón
REC/OTR.
(8:00)
(1:00)
Changing the SETUP menu
1
(Canal a grabar)
(0:30)
Editing
Esta función permite seleccionar
la longitud de la grabación simplemente presionando el botón
REC/OTR en el mando a distancia
o en el panel frontal de la unidad.
Primero:
Playing discs
Para evitar una grabación por
accidente en un casete grabado,
rompa la lengüeta de grabación.
Para volver a grabar posteriormente, cubra el orificio con
cinta adhesiva.
PAUSE
Recording
Presione el botón STOP cuando se complete la grabación.
DVD
VCR
Getting started
• Se selecciona Estéreo o SAP.
MNO
5
TUV
Connections
Tiempo de
grabación/reproducción
T60
T120
T160
2 horas 2-2/3 horas
1 hora
3 horas
6 horas
8 horas
JKL
4
PQRS
7
Antes de grabar, asegúrese de que:
• Se seleccionó el canal deseado
presionando los botones numéricos en el mando a distancia o
botones CHANNEL K/L en el
panel frontal de la unidad.
• Hay una cinta con la lengüeta
para grabación intacta en la
unidad.
• Se seleccionó la velocidad de
grabación deseada en SP (reproducción estándar) o SLP (reproducción de super larga duración)
presionando el botón REC
MODE/REC SPEED en el mando
a distancia.
Velocidad de grabación:
Velocidad
de la cinta
Tipo de cinta
Modo SP
Modo SLP
GHI
Primero:
Note
110
Note
111
CONSUMER LIMITED WARRANTY
(Valid for warranty service in the U.S. only)
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or
remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth
below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper
voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or
construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and
provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of
Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to
the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or
otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which
were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not
allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description: DV-RW340U, DV-RW350U VCR/DVD Recorder Combination
(Be sure to have this information available when you need service
for your Product.)
Warranty Period for this Product:
One (1) year parts and ninety (90) days labor from date of purchase.
Additional Item(s) Excluded from warranty
Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
Call Sharp Electronics corporation toll free at 1-800-BE-SHARP for
instructions on how to obtain service on your VCR/DVD Recorder
combination.
What to do to Obtain Service:
Ship your product, prepaid, as per the instruction given by the Sharp
representative at the toll free number (1-800-BE-SHARP). BE sure to
have your proof of purchase available. Be sure to ship the product
securely packaged and insured against shipping damage.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, GO TO OUR WEBSITE AT www.sharpusa.com
OR CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Osaka, Japan
9HS1VMN20224
E9434UD/E9435UD★★★★★
1VMN20224
Printed in China