PRODUCT GUIDE
MODEL 463270910
IMPORTANT: Fill out the product record information below.
Serial Number
See ratinglabel on grill for serialnumber.
Date Purchased
Forsupportandto registeryour
grill, pleasevisit us at
www.charbroil.com
If you havequestionsor need
assistanceduringassembly,
pleasecall 1-888-430-7870.
Estimated assembly time: 30 minutes
The following are trademarks registered by W.C. Bradley Co. in the U.S. Patent and Trademark Office: Caldera®; Charcoal2Go®; Char-Broil@; America's Legendary
Barbeque Company®; American Gourmet®; Bandera®; Brush Hawg®; CB 940®; Char-Diamonds®;
Char-Broil Charcoal/Gas®;
Everybody Grills@; Everybody
Outside®; FastStart®; Grill 2 Go®; Grill 2 Go® Express@; Grill Lovers@; Infrared Grilling That's All About U®; Keepers of the Flame®; New Braunfels Smoker
Company®; Patio Bistro®; Patio Caddie®; Patio Kitchen®; Pro-SeatO; RED®; Quantum@; Santa Fe@; Sear and Grill@; Sierra@; Signature Series@; Sure2Burn@;
The Big Easy@; Trentino@; U@; Wild West Tradition@; and the following marks:
The following are trademarks of W.C. Bradley Co.; Advantage Series TM;Auto-Clean TM;Chef Tested TM; Corn mercial Series TM; Designer Series TM;; Diamond Flame TM;
Double ChefTM; Fireball TM;FirenzyTM ; FlavorMasterTM ;FrontAvenueTM; Grill 2 Go@AdvantageTM; Hog and Yard Bird TM;H20 SmokerTM; Infrared. Grilling's Juicy Little
SecretTM; Incredible Taste. Infallible ResulIsTM; Infrared InsideTM; InsureTM; Let's Grill Something TogetherTM; Lev-AlerITM; LonghornTM; MagnetoTM; Precision
FlameTM; Quick2BurnTM; QuickSetTM; Ready When You AreTM; Season, Set, And SavorTM; Sizzle On The GrilITM; Signature SeriesTM; SureFireTM; The Minute
Grill TM ;TorchforkTM; Universal Grill ParIsTM; YOU Bring the Party TM
TEC TM is a trademark of Tec Infrared Grills.
Protected underone or more of the following U.S. Patents: 5,421,3t9; 5,458,309;5,579,755; 5,996,573; 6,135,104;6,279,566; 6,33t,108; 6,484,900; 6,526,876;6,595,197; 6,640,799;6,640,803; 6,729,873; 6,739,473;6,749,424; 6,792,935;6,951,213; 7,047,590;
7,516,693;D364,535; D372,637; D373,701;D377,735; D383,035; D397,9t0; D405,643;D406,OO5;D486,009; D413,043;D413,229; D414,982; D415,388;I}416,164; D4t6,441; D4t7,587; I}417,588; D422,516; D423,274;I}423,876; D428,303; D430,772;I}435,396;
D436,004; D438,059; D438,060;D438,427; D439,110; D442,505;D443,179; D443,354; D443,464; D447,384;D447,385; D447,909; D448,6t0; D448,614;D448,615; D448,616; D448,975; D449,492;D450,544; D451,759; D454,028; D454,03t; D455,205; D455,206;
D456,202; D456,222; D456,223;D457,789; D458,520; D458,760; D458,802; D459,088; D459,148D459,149; D459,161; D459,163;D459,586; D459,943; D460,3t2; D460,3t3; D460,3t8; D46t,359; D465,123; D465,693; D466,307; D466,439;D466,752; D473,4t4;
D474,371; D477,498; I}477,50t; D477,504; I}477,506; D477,746; D478,471; D478,472; D480,914; D49t,410; D494,009; D494,4t3; D498,523; D500,359; D504,048; D530,098; D535,OOO;Canada:D97,504;D99,355; D102,037; D104,2OO;DtOS,377;2,315,567;
France:D010,231;DOt0,422;D010,590;D0t0,849; 1,089,646;South Korea:384,565; United Kingdom:2,099,402.OtherPatents Pending. @2009 W.C.Bradley Company
@2009 Char-Broil,LLC Columbus,GA 31902
Printed in China
Assemblyinstructions @2009
11/09/09 QG51%001-020802
For Your Safety ....................................
2-3
Use and Care .....................................
4-9
Limited Warranty ....................................
10
Parts List ..........................................
11
Parts Diagram ......................................
12
Assembly .......................................
13-23
Troubleshooting ..................................
24-26
Registration Card ...................................
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fire department.
27
Safety Symbols
The symbols and boxes shown below explain what each heading
means. Read and follow all of the messages found throughout
the manual.
WARNING: Indicates an potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTioN
CAUTION: Indicatesa potentially hazardous situation or
unsafe practicewhich, if not avoided, may result in minor
or moderate injury,
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
1. Do not store or use gasoline or other
flammable liquids or vapors in the vicinity of
this or any other appliance.
2. An LP cylinder not connected for use shall not
be stored in the vicinity of this or any other
appliance.
CAUTION
For residential use only. Do not use for commercial
cooking.
CAUTIONRead and follow all safety statements, assembly
instructions, and use and care directions before attempting
to assemble and cook.
|NSTALLER/ASSEMBLER:
Leave this manual with consumer.
CONSUMER"
Keep this manual for future reference.
WARNING=
Failure to follow all manufacturer's instructions could result
in serious personal injury and/or property damage.
CAUTION:
Some parts may contain sharp edges - especially as noted
in the manual! Wear protective gloves if necessary.
CAUTION
CALIFORNIA
PROPOSITION
65
1.Combustionby-productsproducedwhenusing
this productcontainchemicalsknownto the Stateof
Californiato causecancer,birth defects,andother
reproductiveharm.
2.This productcontainschemicals,including lead
and lead compounds, known to the State of
California to cause cancer, birth defects or other
reproductive harm.
Wash your hands after handling this product.
Installation Safety Precautions
* Use grill, as purchased, only with LP (propane) gas and the
regulator/valve assembly supplied. If your grill is Dual Fuel ready,
a conversion kit must be purchased for use with natural gas.
, Grill installation must conform with local codes, or in their
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B 149.2, or the Standard for Recreational
Vehicles,ANSI A 119.2/NFPA1192, and CSA Z240 RV Series,
Recreational Vehicle Code, as applicable.
, All electrical accessories (such as rotisserie) must be
electrically grounded in accordance with local codes, or
National Electrical Code, ANSI/NFPA 70 or Canadian
Electrical Code, CSA C22.1. Keep any electrical cords and/or
fuel supply hoses away from any hot surfaces.
o This grill is safety certified for use in the United States and/or
Canada only. Do not modify for use in any other location.
Modification will result in a safety hazard.
Do not attempt to repair or alter the
hoseNalve/regulator for any "assumed" defect. Any
modification to this assembly will void your warranty
and create the risk of a gas leak and fire. Use only
authorized replacement parts supplied by
manufacturer.
Using pots larger than 6 quarts in capacity could
exceed weight limit of the
side burner shelf
or side shelf,
resulting in failure
of grill cart
components.
LP Cylinder
•The LP cylinder used with your grill must meet the
following requirements:
•Use LP cylinders only with these required measurements: 12"
(30.5cm) (diameter) x 18" (45.7 cm) (tall) with 20 lb. (9 kg.)
capacity maximum.
• NEVERstore a spare LP cylinder under or near
the appliance or in an enclosed area.
•LP cylinders must be constructed and marked in accordance
with specifications for LP cylinders of the U.S. Department of
Transportation (DOT) or for Canada, CAN/CSA-B339,
cylinders, spheres and tubes for transportation of dangerous
goods. Transport Canada (TC). See LP cylinder collar for
marking.
•LP cylinder valve must have:
•Type 1 outlet compatible with
regulator or grill.
•Safety relief valve.
•UL listed Overfill Protection
OPDHandWheel
Device (OPD). This OPD safety
feature is identified by a unique triangular hand wheel. Use
only LP cylinders equipped with this type of valve.
•LP cylinder must be arranged for vapor withdrawal and include
collar to protect LP cylinder valve. Always keep LP cylinders in
upright position during use, transit or storage.
• Never fill a cylinder beyond 80% full.
• An over filled or improperly stored cylinder is a
hazard due to possible gas release from the
safety relief valve. This could cause an intense
fire with risk of property damage, serious injury or
death.
If you see, smell or hear gas escaping,
immediately get away from the LP
cylindedappliance and call your fire department.
LP Cylinder Removal, Transport and Storage
•Turn OFF all control knobs and LP cylinder valve. Turn coupling
nut counterclockwise by hand only - do not use tools to
disconnect. Loosen cylinder screw beneath bottom shelf, then
lift LP cylinder up and out of cart. Install safety cap onto LP
cylinder valve. Always use cap and strap supplied with valve.
Failure to use safety cap as directed may result in serious
personal injury and/or property damage.
•Adisconnected LP cylinder in LPCylinder
storage or being transported
must have a safety cap installed (as shown).
Do not store an LP cylinder in enclosed spaces
such as a carport, garage, porch, covered
patio or other building. Never leave an LP cylinder
Safety
inside a vehicle which may become overheated
Cap
by the sun.
Retainer Strap
•Do not store an LP cylinder in an area where children play.
LP cylinder in upright position for vapor withdrawal
LP (Liquefied
Petroleum Gas)
•LP gas is nontoxic, odorless and colorless when produced. For
Your Safety, LP gas has been given an odor (similar to rotten
cabbage) so that it can be smelled.
•LP gas is highly flammable and may ignite unexpectedly when
mixed with air.
LP Cylinder Filling
•Use only licensed and experienced dealers.
•LP dealer must purge new cylinder before filling.
•Dealer should NEVER fill LP cylinder more than 80% of LP
cylinder volume. Volume of propane in cylinder will vary by
temperature.
•A frosty regulator indicates gas overfill. Immediately close LP
cylinder valve and call local LP gas dealer for assistance.
•Do not release liquid propane (LP) gas into the atmosphere.
This is a hazardous practice.
•To remove gas from LP cylinder, contact an LP dealer or call a
local fire department for assistance. Check the telephone
directory under "Gas Companies" for nearest certified LP
dealers.
LP Cylinder Exchange
Connecting Regulator to the LP Cylinder
•Many retailers that sell grills offer you the option of replacing
your empty LP cylinder through an exchange service. Use only
those reputable exchange companies that inspect, precision fill,
test and certify their cylinders. Exchange your cylinder only
for an OPD safety feature-equipped cylinder as described
in the "LP Cylinder" section of this manual.
1.LP cylinder must be properly secured onto grill. (Refer to
assembly section.)
•Always keep new and exchanged LP cylinders in upright
position during use, transit or storage.
2.Turn all control knobs to the OFF position.
3.TurnLP cylinder OFF by turning hand-wheel clockwise to a
full stop.
4.Remove the protective cap from LP cylinder valve. Always use
cap and strap supplied with valve.
•Leak test new and exchanged LP cylinders BEFORE
connecting to grill.
•Place dust cap on cylinder valve outlet whenever the cylinder is
not in use. Only install the type of dust cap on the cylinder valve
outlet that is provided with the cylinder valve. Other types of caps
or plugs may result in leakage of propane.
LP Cylinder Leak Test
For your safety
•Leak test must be repeated each time LP cylinder is exchanged
or refilled.
OPDHandWheel
j
Safety Relief Valve
•Do not smoke during leak test.
•Do not use an open flame to check for gas leaks.
•Grill must be leak tested outdoors in a well-ventilated area,
away from ignition sources such as gas fired or electrical
appliances. During leak test, keep grill away from open flames
or sparks.
!
Strap and Cap
•Use a clean paintbrush and a 50/50 mild soap and water
solution. Brush soapy solution onto areas indicated by arrows
in figure below.
Do not use a POL transport plug
(plastic part with external threads)!
It will defeat the safety feature of
the valve.
A Do not use household cleaning agents. Damage to gas
train components can result.
5.Hold regulator and insert nipple into LP
cylinder valve. Hand-tighten the
coupling nut, holding regulator in a
straight line with LP cylinder valve so
as not to cross-thread the connection.
Nipple has to be centered
intothe LP cylinder valve.
If "growing" bubbles appear do not use or move the LP
cylinder. Contact an LP gas supplier or your fire
department!
Type 1 outlet with
thread on outside
Leak Testing Valves, Hose and Regulator
1.Turn all grill control knobs to OFF.
2.Be sure regulator is tightly connected to LP cylinder.
3.Completely open LP cylinder valve by turning hand wheel
counterclockwise. If you hear a rushing sound, turn gas off
immediately. There is a major leak at the connection. Correct
before proceeding.
Hold coupling nut and regulator
as shown for properconnection
to LP cylinder valve.
4.Brush soapy solution onto areas circled below, or other similar
fittings on your grill.
6.Turn the coupling nut clockwise and tighten to a full stop. The
regulator will seal on the back-check feature in the LP cylinder
valve, resulting in some resistance. An additional one-half to
three-quarters turn is required to complete the
connection. Tighten by hand only - do not use tools.
NOTE:
If you cannot complete the connection, disconnect regulator and
repeat steps 5 and 6. If you are still unable to complete the
connection, do not use this regulator!
Do not insert any tool or foreign object into the valve
outlet or safety relief valve. You may damage the valve
and cause a leak. Leaking propane may result in
explosion,fire, severe personal injury, or death.
Outdoor gas appliance is not intended to be installed
in or on a boat.
Outdoor gas appliance is not intended to be installed
in or on an RV.
, Never attempt to attach this grill to the self-contained
LP gas system of a camper trailer or motor home.
, Do not use grill until leak-tested.
, If a leak is detected at any time, STOP and call the fire
department.
, If you cannot stop a gas leak, immediately close
LPcylinder valve and call LP gas supplier or your fire
department!
5.If "growing" bubbles appear, there is a leak. Close LP
cylinder valve immediately and retighten connections. If leaks
cannot be stopped do not try to repair. Call for replacement
parts.
6.Always close LP cylinder valve after performing leak test by
turning hand wheel clockwise.
For Safe Use of Your Grill and to Avoid Serious
injury:
• Do not let children operate or play near grill.
• Keep grill area clear and free from materials that burn.
• Do not block holes in sides or back of grill.
• Check burner flames regularly.
• Use grill only in well-ventilated space. NEVER use in
enclosed space such as carport, garage, porch,
covered patio, or under an overhead structure of any
kind.
Do not use charcoal or ceramic briquets in a gas grill.
(Unless briquets are supplied with your grill.)
Use grill at least 3 ft. from any wall or surface.
Maintain 10 ft. clearance to objects that can catch fire
or sources of ignition such as pilot lights on water
heaters, live electrical appliances, etc.
Safety Tips
A Before opening LP cylinder valve, check the coupling nut for
tightness.
A When grill is not in use, turn off all control knobs and LP
cylinder valve.
A Never move grill while in operation or still hot.
A Use long-handled barbecue utensils and oven mitts to avoid
burns and splatters.
A Maximum load for sideburner and side shelf is 10 Ibs.
A The grease tray must be inserted into grill and emptied after
each use. Do not remove grease tray until grill has
completely cooled.
A Clean grill often, preferably after each cookout. If a bristle
brush is used to clean any of the grill cooking surfaces,
ensure no loose bristles remain on cooking surfaces prior to
grilling. It is not recommended to clean cooking surfaces
while grill is hot.
A If you notice grease or other hot material dripping from grill
onto valve, hose or regulator, turn off gas supply at once.
Determine the cause, correct it, then clean and inspect valve,
hose and regulator before continuing. Perform a leak test.
A Keep ventilation openings in cylinder enclosure (grill cart) free
and clear of debris.
A Do not store objects or materials inside the grill cart
enclosure that would block the flow of combustion air to the
underside of either the control panel or the firebox bowl.
A The regulator may make a humming or whistling noise during
operation. This will not affect safety or use of grill.
A If you have a grill problem see the "Troubleshooting Section".
A If the regulator frosts, turn off grill and LP cylinder valve
immediately. This indicates a problem with the cylinder and it
should not be used on any product. Return to supplier!
CAUT'O.
• Putting out grease fires by closing the lid is not possible.
Grills are well ventilated for safety reasons.
• Do not use water on a grease fire. Personal injury may
result, if a grease fire develops, turn knobs and LP
cylinder off.
• Apartment Dwellers:
Check with managementto learn the requirements
and fire codes for using an LP gas grill in your
apartment complex. If allowed, use outside on the
ground floor with a three (3) foot clearance from walls
or rails. Do not use on or under balconies.
• NEVER attempt to light burner with lid closed.A
buildup of non-ignited gas inside a closed grill is
hazardous.
• Never operate grill with LP cylinder out of correct
position specified in assembly instructions.
• Always close LP cylinder valve and remove
coupling nut before moving LP cylinder from
specified operation position.
• Do not leave grill unattended while preheating or burning
off food residue on HI. if grill has not been regularly
cleaned, a grease fire can occur that may damage the
product.
ignitor Lighting
A Do not lean over grill while lighting.
1. Turn OFF gas burner control valves.
2. Turn ON gas at LP cylinder.
3. Open lid during lighting.
4. To ignite, push and turn ignition burner knob to HI.
5. Push and hold ELECTRONIC IGNITION button until the burner
lights.
6. If ignition does NOT occur in 5 seconds, turn the burner
controls OFF, wait 5 minutes and repeat the lighting
procedure.
7. To ignite remaining burners, turn knob to the HI position
starting with the burners closest to IGNITION BURNERS first.
If ignitor does not work, follow match lighting instructions.
Lighting instructions are continued on the next page
7
Ignitor Lighting (continued)
8. For grills equipped with ELECTRONIC IGNITION at
each burner:
Repeat steps 4 through 6 to light each burner.
9. Once each burner has ignited, turn knobs to desired setting.
Burner Flame Check
• Remove cooking grates and flame tamers. Light burners, rotate
knobs from Hi to LOW. You should see a smaller flame in
LOW position than seen on Hi. Perform burner flame check
on sideburner, also. Always check flame prior to each use. If
only low flame is seen refer to "Sudden drop or low flame" in
the Troubleshooting Section.
Turn controls and gas source or tank OFF when not
in use.
cAuT,o.
if ignition does NOT occur in 5 seconds, turn the
burner controls OFF, wait 5 minutes and repeat the
lighting
procedure.
If the burner does not ignite with
the valve open, gas will continue
burner and could accidently
to flow out of the
ignite with risk of injury.
Match-Lighting
,& Do not lean over grill while lighting.
1. Open lid. Turn ON gas at LP cylinder.
Turning Grill Off
• Turn all knobs to the OFFposition. Turn LP cylinder OFF by turning
hand-wheel clockwise to a full stop.
Ignitor Check
• Turn gas off at LP cylinder. Press and hold electronic ignitor
button. "Click" should be heard and spark seen each time
between each collector box or burner and electrode. See
"Troubleshooting" if no click or spark.
Valve Check
3. Push in and turn far right or far left burner knob to the Hi
position, depending on match light hole selected. Be sure
burner lights and stays lit.
4. Light adjacent burners in sequence by pushing knobs in and
turning to the HI position.
• important: Make sure gas is off at LP cylinder before
checking valves. Knobs lock in OFF position. To check
valves, first push in knobs and release, knobs should spring
back. If knobs do not spring back, replace valve assembly
before using grill. Turn knobs to LOW position then turn back to
OFF position. Valves should turn smoothly.
Hose Check
• Before each use, check to see if hoses are cut or worn.
Replace damaged hoses before using grill. Use only
valve/hose/regulator specified by manufacturer.
General Grill Cleaning
• Do not mistake brown or black accumulation of grease and
smoke for paint. Interiors of gas grills are not painted at the
factory (and should never be painted). Apply a strong solution
of detergent and water or use a grill cleaner with scrub brush
on insides of grill lid and bottom. Rinse and allow to completely
air dry. Do not apply a caustic grill/oven cleaner to painted
surfaces.
Sideburner
• Plastic parts: Wash with warm soapy water and wipe dry.
A Do not use citrisol, abrasive cleaners, degreasers or a
concentrated grill cleaner on plastic parts. Damage to and
failure of parts can result.
• Porcelain surfaces: Because of glass-like composition, most
residue can be wiped away with baking soda/water solution or
specially formulated cleaner. Use nonabrasive scouring powder
for stubborn stains.
2. Place match into match holder (hanging from side panel of
grill). Light match; then light burner by placing match through
the match light hole on right or left side of grill.
ignitor Lighting
A Do not lean over grill while lighting.
1. Open sideburner lid. Turn ON gas at LP cylinder.
2. Turn sideburner knob to the Hi position, push and hold
ELECTRONIC IGNITOR button.
3. If sideburner does NOT light within 5 seconds, turn knob to OFF,
wait 5 minutes, then
repeat lighting procedure.
Sideburner Match Lighting
1. Open sideburner lid. Turn ON
gas at LP cylinder.
2. Place lit match near burner.
3. Turn sideburner knob to the
HI position.
Be sure burner lights and
stays lit.
8
• Painted surfaces: Wash with mild detergent or nonabrasive
cleaner and warm soapy water. Wipe dry with a soft
nonabrasive cloth.
• Stainless steel surfaces: To maintain your grill's high quality
appearance, wash with mild detergent and warm soapy water
and wipe dry with a soft cloth after each use. Baked-on grease
deposits may require the use of an abrasive plastic cleaning
pad. Use only in direction of brushed finish to avoid damage.
Do not use abrasive pad on areas with graphics.
• Cooking surfaces: If a bristle brush is used to clean any of
the grill cooking surfaces, ensure no loose bristles remain on
cooking surfaces prior to grilling. It is not recommended to
clean cooking surfaces while grill is hot.
cAuTioN
3.
4.
f
SPIDER
Remove carryover tubes and burners.
Detach electrode from burner.
NOTE: Removal/Detachment method will depend on the
burner configuration, See different configurations in
illustrations below.
ALERT!
5. Carefully lift each burner up and away from valve openings,
We suggest three ways to clean the burner tubes, Use the one
easiest for you.
(A) Bend a stiff wire (a light weight coat hanger works well)
into a small hook, Run the hook through each burner
tube several times,
(B) Use a narrow bottle brush with a flexible handle (do not
use a brass wire brush), run the brush through each
burner tube several times.
If you notice thatyour grill is getting hard to light or thatthe
flame isn't as strong as it should be, take the time to check and
clean the ventud's.
6.
iiiiiiiil
(C) Wear eye protection: Use an air hose to force air into
the burner tube and out the burner ports. Check each
port to make sure air comes out each hole.
Wire brush entire outer surface of burner to remove food
residue and dirt.
7.
SPIDERWEBS
CONTROLPANEL
INSIDE VENTURI
In someareasof the country,spidersor small insectshavebeen
knownto create"flashback"problems.The spidersspinwebs,build
nestsand layeggs in the grill'sventuritube(s)obstructingthe flow of
gasto the burner.Thebacked-upgascan ignitein the venturibehind
thecontrolpanel.This is knownasa flashbackand it candamage
yourgrill and evencauseinjury.
Clean any blocked ports with a stiff wire such as an open
paper clip.
8. Check burner for damage, due to normal wear and corrosion
some holes may become enlarged. If any large cracks or
holes are found replace burner.
VERY IMPORTANT:Burner tubes must reengage valve
openings. See illustrations at right.
9. Attach electrode to burner.
Correct
burner-to-valve
10. Carefully replace burners,
11. Attach burners to brackets on firebox.
engagement
12. Reposition carryover tubes and attach
to burners. Replace flame tamers and
cooking grates.
Topreventflashbacksand ensuregoodperformancethe burnerand
venturiassemblyshouldbe removedfrom the grill and cleaned
foreusewheneverthe grill hasbeen idlefor an extendedperiod.)
J
Storing Your Grill
• Clean cooking grates.
p
it
ii"
::i:: ""
• Store in dry location.
• When LP cylinder is connected to grill, store outdoors in a wellventilated space and out of reach of children.
• Cover grill if stored outdoors. Choose from a variety of grill
covers offered by manufacturers.
"
Electrode
bracket
• Store grill indoors ONLY if LP cylinder is turned off and
disconnected, removed from grill and stored outdoors.
• When removing grill from storage, follow "Cleaning the Burner
Assembly" instructions before starting grill.
Cleaning the Burner Assembly
Follow these instructions to clean and/or replace parts of burner
assembly or if you have trouble igniting grill.
1. Turn gas OFF at control knobs and LP cylinder,
2. Remove cooking grates and flame tamers.
bracket
screwdriver
This warranty only applies to units purchased fiom an authorized retailer. ManuPacturer warrants to the original cunsumer-purchaser only that this
product shall be fiec from defects in workmanship and materials after correct assembly and under normal and reasonable home use for the periods
indicated below beginning on the date of purchase*. The manuPacturer reserves the right to require that defective parts be returned, postage and or
freight pre-paid by the consumer for review and examination.
SCOPE
OF COVERAGE
PERIOD
Stainless Burner
Firebox and Lid
All Other Parts
OF COVERAGE
TYPE
Limited Lifetime
2 years from date of purchase*
l year from date of prochase*
OF FAILURE
COVERAGE
PERFORATION, MANUFACTURING,
AND MATERIAL DEFECTS ONLY
*Note: A dated sales reciept WILL be required for wananty service.
The
original
consumer-purchaser
will be responsible
for all shipping
charges
for parts replaced
under
the terms
of this limited
warranty.
This limited warranty is applicable in the United States and Canada only; is only available to the original owner of the product and is not transferable.
Manufacturer
requires proof of your date of purchase. Theretbre, you should retain your sales slip or invoice. Registering your product is not a
substitute for proof of purchase and the manuPacturer is not responsible for or required to retain proof of purchase records.
This limited wananty applies to the functionality
of the product ONLY and does not cover cosmetic issues such as scratches, dents, corrosions
discoloring
by heat, abrasive and chemical cleaners or any tools used in the assembly or installation
of the appliance, surt:ace rust, or the
discoloration
of stainless steel surfiaces.
RUST is not considered
a manufacturing
or materials
defect.
This limRed
warranty
will not reimburse
you for the cost of any inconvenience,
food, personal
injury
or property
or
damage.
ITEMS MAN UFACTURER WILL NOT PAY FOR:
1. Shipping cost, standard or expedited, for warranty and replacement parts
2. Service calls to your home.
3. Repairs when your product is used for other than normal, single-family household or residential use.
4. Damage, failures, or operating difficulties resulting from accident, alteration, careless handling, misuse, abuse, fire, flood,
acts of God, improper installation or maintenance, installation not in accordance with electrical or plmnbing codes, or use
of products not approved by the manufacturer.
5. Any food loss due to product failures or operating difficulties.
6. Replacement parts or repair labor costs for units operated outside the United States or Canada.
7. Pickup and delivery of your product.
8. Repairs to parts or systems resulting from unauthorized modifications made to the product.
9. The removal and/or reinstallation of your product.
DISCLAIMER OF IMPLIED WARRANTIES and LIMITATION OF REMEDIES
Repair or replacement of defective parts is your exclusive remedy under the terms of this limited warranty. In the event of parts availability issues,
the manufacturer reserves the right to substitute like or similar parts that are equally functional.
Manufacturer will not be responsible for any consequential or incidental damages arising IYom the breach of either this limited warranty or any
applicable implied warranty; or for failure or damage resulting from acts of God, improper care and maintenance, grease fire, accident, alteration,
replacement of parts by anyone other than Manufacturer, misuse, transportation, commercial use, abuse, hostile environments (inclement weather,
acts of nature, animal tampering), improper installation or installation not in accordance with local codes or printed manufacturer instructions.
THIS LIMITED WARRANTY IS THE SOLE EXPRESS WARRANTY GIVEN BY THE MANUFACTURER.
NO PRODUCT PERFORMANCE
SPECIFICATION OR DESCRIPTION WHEREVER APPEARING IS WARRANTED BY MANUFACTURER EXCEPT TO THE EXTENT SET
FORTH IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTY PROTECTION ARISING UNDER THE LAWS OF ANY S'IWFE,
INCLUDING IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAt_FICULAR PURPOSE OR USE, IS HEREBY
LIMITED IN DURATION TO THE DURATION OF THIS LIMITED WARRANTY.
Neither dealers nor the retail establishment
selling this product
has any authority
to make any additional
warranties
in addition
to or inconsistent
with those stated above.
Manufacturer's
maximum
liability,
in any event, shall not exceed
product paid by the original consumer.
or to promise
remedies
the purchase price of the
NOTE: Some states do not allow an exclusion or limitation of incidental or consequential damages, so some of the above limitations or exclusions
may not apply to you. This limited warranty gives you specific legal rights as set foth herein. You may also have other rights which vary from state
to state. In the state of California only; if refinishing or replacement of the product is not commercially practicable, the retailer selling this product or
the Manufacturer will refund the purchase price paid for the product, less the amount directly attributable to use by the original consumer-purchaser
prior to discovery of the nonconformity. In addition, in the state of California only; you may take the product to the retail establishment selling this
product in order to obtain performance under this limited wananty.
If you wish to obtain
performance
of any obligation
under
write to:
Consumer
Relations
P. O. Box 124t)
this limited
warranty,
Columbus,
GA 3191)2-1241)
Consumer returns will not be accepted unless a valid Return Authorization
is first acquired.
Authorized
the package with an RA number and the package is shipped freight/postage
pre-paid.
Consumer returns
refused.
you should
returns are clearly marked on the outside
that do not meet these standards will be
of
A
1
TOP LID
QQ
2
HANDLE F/DOOR
RR
SS
1
1
DOOR, RIGHT, NO HANDLE
SIDEBURNER
B
1
TOP LID, INNER LINER
C
1
LOGO PLATE
D
1
HANDLE, TOP LID
TT
1
ELECTRODE, F/SIDEBURNER
E
1
HARDWARE
UU
1
ELECTRONIC IGNITION MODULE
F
2
RUBBER BUMPER, RECTANGLE,
TOP LID
VV
1
CAP, F/ELECTRONIC
MODULE
G
H
4
1
RUBBER BUMPER, ROUND
FIREBOX
WW
1
HEAT SHIELD, F/ELECTRONIC
MODULE
I
1
HOSE VALVE REGULATOR
XX
1
IGNITOR WIRE, F/SIDEBURNER
J
3
MAIN BURNER
YY
1
GRATE, F/SIDEBURNER
ZZ
1
GROMMET
F/TOP LID ASSEMBLY
F/
K
3
ELECTRODE SET, F/MAIN BURNER
IGNITION
L
2
CARRYOVER TUBE
M
1
MAIN CONTROL PANEL
N
1
IGNITER SWITCH MODULE
O
4
CONTROL KNOB
P
4
BEZEL F/CONTROL
Q
1
MATCH HOLDER
...
1
CASTER WRENCH
R
3
THERMOMETER
...
2
DOOR MAGNET
S
1
WARMING
...
1
HARDWARE
T
3
FLAME TAMER
...
1
ASSEMBLY MANUAL, ENGLISH
U
3
COOKING GRATE
Not Pictured:
KNOB
RACK
V
3
TRAY, COOKING GRATE
W
1
LEFT CART PANEL
X
1
RIGHT CART PANEL
Y
1
BOTTOM SHELF
Z
1
TANK SCREW
AA
2
CASTER, LOCKING
BB
2
CASTER, FIXED
CC
1
RIGHT SIDE SHELF
DD
1
CONTROL PANEL, RIGHT SIDE SHELF
EE
1
SIDEBURNER SHELF
FF
1
DRIP PAN INSERT
GG
1
LID, F/SIDEBURNER
HH
1
CONTROL PANEL,SB SHELF
II
1
LOWER REAR CART PANEL
JJ
1
UPPER REAR CART PANEL
KK
1
LEFT RAIL, F/GREASE
LL
1
RIGHT RAIL, F/GREASE
MM
NN
1
1
HEAT SHIELD, F/TANK
GREASE TRAY
OO
1
UPPER DOOR BRACE
PP
1
DOOR, LEFT, NO HANDLE
PACK
TRAY
TRAY
11
S
U
U
\
U
\
B
T
T
T
F
_---D
FF_
SS
P_
XX----_ .....
0
RR
O0
ZZ
Z
AA----_
BB
12
/ww
Attach
locking
casters
the rear of the bottom shelf
and thethe
twotwo
fixed
casters
at theatfront
Fixed caster
Locking caster-___....__._
Bottom
Attach side panels to bottom shelf using three
1/4-20x112" screws, 7ram lock washers, and
7ram flat washers per panel.
IMPORTANT: Panel with large hole must
Be on left side of bottom shelf.
Left side panel
(with large hole)
Make sure side panels
are pushed as far to the
rear of bottom shelf as
Right side panel
possible before fully
tightening screws.
13
Place lower back panel between side
panels at rear of bottom shelf. Secure
lower back panel to side panels using four
114-20x112"screws, 7ram lock washers,
and 7ram flat washers on each side.
Lower back panel
114-20x112"screw
7ram lock washer
7ram flat washer
This step requires two people
to lift and position grill head
onto cart. Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging outside
the cart. Grill head must face open
side of cart.
Regulator hose
On back of grill, place upper back panel between side panels and
above lower back panel Secure upper back panel, in lower holes,
using one 114-20x11/2
'' screw, 7ram lock washer, and 7ram fiat
washer on each side. Do not fully tighten screws until side shelf
installation is complete in later steps.
Upper back panel
Insert flange on right side shelf into side shelf brackets on side of firebox.
Attach right side shelf using three 114"-20x314"screws, 7ram lock washers, 7ram flat washers, 1/4" nuts, shown A.
Attach rear of shelf using one l14-20xlV2" screw, 7ram lock washer, and 7ram flat washer in lower hole, shown B.
Attach front of shelf and fascia using one #8x3/8" self-tapping screw and large flat washer, shown C.
Attach front of shelf and fascia using one 114"-20x314" screw, 7ram lock washer, 7ram flat washer and 114" nut, shown D/C.
lf!l
7ram mock
washer
screw
flat
washer
lock
washer
scia, right side shelf
Main control
panel
washer
washer
15
Insert flange on left sideburner shelf into side shelf brackets on side of firebox.
Attach left sideburner shelf using three 1/4-20x3/4" screws, 7ram lock washers, 7ram flat washers, 1/4" nuts, shown A.
Attach rear of shelf using one 114.20x11/2
'' screw, 7ram lock washer, and 7ram flat washer in lower hole, shown B.
Attach front of shelf and fascia using one #8x3/8" self-tapping screw and large flat washer, shown C.
Under main control panel, attach front of shelf and fascia using one 1/4-20x3/4" screw, 7ram lock washer, 7ram flat
washer and 1/4" nut, shown DIE.
Now you may fully tighten lower screws on upper back panel.
Flange
into
1/4-20)
screw
Fascia, left si
Back of main control )anel
7ram lock
washer
1/4-20x3/4"
screw
First, remove the two screws and lock washers factory attached to the sideburner valve bracket. Position sideburner
valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes
on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.
Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on
fascia. Attach using two #8-32x3/8" screws and 4ram lock washers. Press sideburner control knob onto valve stem.
Note: Use left and right
holes on fascia to
attach valve bracket
Screws and Washers
removed from valve bracket
Note: Use upper and lower
holes on tascla to
attach bezel
Control knob
)
---..
#8-32x318" screw
4mm
lock washer
!;!;!;!;!;!;!;!;
Control knob bezel
Sideburner
i valve bracket
Valve stem
Pull out the three knobs from control panel, insert temperature gauge stem into the biger hole above knob bezel,shown A.
Make the temperature gauge attached on the panel. Push the temperature gauge downward till it clips on the panel,
shown B/C. Re-install the three knobs.
Knob
Tern
ire gauge stem
Insert sideburner burner into left shelf.The stud on bottom of burner fits into rear small hole in sideburner drip pan on
shelf, shown A. Secure burner to sideburner drip pan with one Wing nut, shown B. Make sure burner tube
engages sideburner valve shown C.
Sideburner burner
p pan
Wing nut
....
;i
Sidebumer drip pan
Under sideburner shelf, attach sideburner ignitor wire to electrode, shown A. Place sideburner grate onto sideburner shelf,
aligning grate legs with holes in shelf, shown B.
Sideburner grate
Sidebumer Ignitor Wire
18
Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and
facing the front. Secure using two 1/4-20x11/z'' screws, 7ram lock washers, and 7ram flat washers on each side.
NOTE: MAKE SURE THAT THE FRONT BRACE iS MOUNTED iN THE MOST DOWNWARD POSiTiON WHEN
ASSEMBLED TO CART.
7ram fiat
washer
7mmiock
washer
114-20x1Vz"
screw
Inside of cart, insert rear shield tab into left slot on upper of lower back panel Insert [eft and right grease tray rails into slots
beneath grease tray opening in upper back panel, shown A. Attach front shield tabs under front brace and attach right and
left rails under front brace with three #8x3/8" self-tapping screws, shown B.
Tankheatshield
Note:somepartsomitted
forclarityof illustration
Greasetrayopening
19
Insert hinge pin on bottom of doors into hole in bottom shelf. Press upper hinge pin in front brace, align hinge hole on top of
door, and release hinge pin into door.
Hinge pin
on bottom
of door
Release the cap and nut from electronic ignition module. Attach electronic ignition module and heat shield to the cart right
side panel with the nut and cap, shown A.
Connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the Electronic Ignition
Module.Total(4) connections.
Connect the two wires(A and B) from the switch wiring harness into the back of the Electronic Ignition Module.
Total (2) connections.
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown as A,B.
2O
Install flame tamers by sliding one end of each flame tamer into slots at front of firebox and resting opposite end on pins in
back of firebox.
Note: Some parts omitted for
clarity of illustration
Flame tamers
Place cooking grates onto the firebox as shown. Insert the two wire ends at rear of warming rack into holes in back of
firebox. Front wires of warming rack rest on sides of firebox.
Note: Some parts omitted for
clarity of illustration
Assembled
warming rack
Warming rack
Cooking grate
21
On back of grill, slide grease tray into opening in upper back panel.
m
m
CAUTION
Failure to install grease tray will
cause hot grease to drip from bottom
of grill with risk of fire or property
damage.
Greasetray
Unscrew electronic ignition cap on cart right side panel. InsertAA battery into ignitor, negative (--) end first.
Replace the cap.
AA Battery
÷
Electronic Ignition Cap
22
LP CYLINDER IS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to grill and regulator (see Use &
Care section). Once cylinder has been filled and leak checked, place cylinder into hole in bottom shelf. Make sure cylinder
valve is facing front of grill. Secure cylinder with cylinder screw under bottom shelf. Insert regulator through large hole in
left side panel. See Use & Care section of this manual to perform the "Burner
Flame Check" and for
important safety instructions before using.
Always keep LP cylinders in upright position during
use, transport, and storage.
Regulator
m
CAUTION//
Cylinder valve must face to front of cart once
tank is attached. Failure to install cylinder
correctly may allow gas hose to be damaged
in operation, resulting in the risk of fire.
23
EIVlERGENCIIES=
if a gas leak cannot be stopped, or a fire occurs due to gas leakage, call the fire department.
Gasleakingfrom
cracked/cut/burned
hose.
, Damagedhose.
, Turnoff gas at LP cylinderor at sourceon naturalgassystems.If
anythingbut burned,replacevalve/hose/regulator.
If burned,
discontinueuseof productuntila plumberhas investigatedcause
and correctionsare made.
Gasleakingfrom LP
cylinder.
, Mechanicalfailuredue to rustingor
mishandling.
, ReplaceLP cylinder.
Gasleakingfrom LP
cylindervalve.
, Failureof cylindervalve from
mishandlingor mechanicalfailure.
, Turnoff LP cylindervalve.ReturnLP cylinderto gassupplier.
Gasleakingbetween
LP cylinderand
regulatorconnection.
, Improperinstallation,connectionnot
tight,failureof rubberseal.
, Turnoff LP cylindervalve.Removeregulatorfrom cylinderand
visuallyinspectrubbersealfor damage.See LP CylinderLeakTest
and ConnectingRegulatorto the LP Cylinder.
Firecomingthrough
controlpanel.
, Firein burnertube sectionof burnerdue
to blockage.
, Turnoff control knobsand LP cylindervalve.Leavelid opento
allowflamesto die down.After fire is outand grill is cold,remove
burnerand inspectfor spidernestsor rust.See NaturalHazard
and Cleaningthe BurnerAssemblypages.
Greasefire or
continuousexcessive
flamesabovecooking
surface.
, Toomuchgreasebuildupin burnerarea.
, Turnoff control knobsand LP cylindervalve.Leavelid opento
allowflamesto die down.After cooling,cleanfood particlesand
excessgreasefrom insidefireboxarea,greasetray,and other
surfaces.
Troubleshooting
Burner(s)will not light
usingignitor.
(See ElectronicIgnition
Troubleshooting
also)
GASiSSUES:
, Tryingto lightwrongburner.
, Seeinstructionson control paneland in Useand Caresection.
, Burnernot engagedwith controlvalve.
, Makesurevalvesare positionedinsideof burnertubes.
, Obstructionin burner.
, Ensureburnertubesare not obstructedwith spiderwebsor other
matter.See cleaningsectionof Useand Care.
, Nogas flow.
, MakesureLP cylinderis not empty.If LP cylinderis notempty,
referto "Suddendrop in gasflow."
Continuedon next
page.
, Fora grill equippedwith theAUTO-CLEAN
TM feature,makesure
theAUTO-CLEAN
TM valve is set to "Grill"
24
, Vaporlock at couplingnutto LP cylinder.
, Turnoff knobsand disconnectcouplingnut from LPcylinder.
Reconnectand retry.
, Couplingnut and LP cylindervalve not
fully connected.
, Turnthe couplingnutapproximatelyone-halfto three-quarters
additionalturn untilsolidstop.Tightenby handonly- do not use
tools.
ELECTRICALISSUES:
, Electrodecrackedor broken;"sparksat
crack."
, Replaceelectrode(s).
, Electrodetip notin properposition.
MainBurners:
, Tip of electrodeshouldbe pointingtowardgasport openingon
burner.The distanceshouldbe 118"to 114".Adjust if necessary.
Sideburner:
, Tip of electrodeshouldbe pointingtowardgasport openingon
burner,the distanceshouldbe 118"to 3116".Adjust if necessary.
, Wire and/orelectrodecoveredwith
cookingresidue.
, Cleanwireand/orelectrodewith rubbingalcoholand cleanswab.
, Wires are looseor disconnected.
, Reconnectwiresor replaceelectrode/wireassembly.
, Wires are shorting(sparking)between
ignitorand electrode.
, Replaceignitorwire/electrodeassembly.
, Deadbattery.
, Replacewith a newAA-sizealkalinebattery.
Troubleshooting (continued)
Burner(s)will not light
usingignitor.
(See ElectronicIgnition
Troubleshooting
also)
Burner(s)will not
matchlight.
ELECTRONICIGNITION:
• Nospark,no ignitionnoise.
• SeeSectionI of ElectronicIgnitionSystem.
• Nospark,someignitionnoise.
• SeeSectionII of ElectronicIgnitionSystem.
, Sparks,but notat electrodeor at full
strength.
• SeeSectionIII of ElectronicIgnitionSystem.
• See"GAS ISSUES:"on previouspage.
• Matchwill not reach.
, Uselong-stemmatch(fireplacematch).
• Impropermethodof match-lighting.
• See"Match-Lighting"sectionof Useand Care.
, Outof gas.
• Checkfor gasin LP cylinder.
• Excessflow valvetripped.
•Turnoff knobs,wait 30 secondsand lightgrill. If flamesare still low,
turnoff knobsand LP cylindervalve.Disconnectregulator.
Reconnectregulatorand leak-test.Turnon LP cylindervalve,wait
30 secondsand thenlightgrill.
•Vaporlock at couplingnut/LPcylinder
connection.
•Turnoff knobsand LP cylindervalve.Disconnectcouplingnutfrom
cylinder.Reconnectand retry.
• Highor gustingwinds.
•Turnfront of grill to face windor increaseflameheight.
• Lowon LP gas.
• RefillLP cylinder.
• Excessflow valvetripped.
• Referto "Suddendrop in gasflow"above.
• Greasebuildup.
• Cleanburnersand insideof grilltfirebox.
• Excessivefat in meat.
•Trim fat from meat beforegrilling.
• Excessivecookingtemperature.
•Adjust(lower)temperatureaccordingly.
Persistentgreasefire.
• Greasetrappedby foodbuilduparound
burnersystem.
•Turnknobsto OFF.Turngas off at LPcylinder.Leavelid in position
and let fire burnout.After grill cools,removeandcleanall parts.
Flashback...
(firein burnertube(s)),
• Burnerand/orburnertubesare blocked.
•Turnknobsto OFF.Cleanburnerand/orburnertubes.See burner
cleaningsectionof Use and Care.
Unableto fill LP
cylinder.
• Somedealershaveolder fill nozzles
withworn threads,
•The wornnozzlesdon'thaveenough"bite"to engagethe valve.Try
a secondLPdealer.
One burnerdoes not
lightfrom other
burner(s).
• Greasebuildupor foodparticlesin
end(s)of carryovertube(s).
• Cleancarry-overtube(s)with wirebrush.
Suddendrop in gas
flow or low flame.
Flamesblowout.
Flare-up.
Timerdoesnot work
(Greenlightdoesnot
flash)
•
•
•
DeadBattery
Batteriesinstalledincorrectly.
Knob Positiondid notstart the Clean
Cycle
•
•
•
ReplaceBatteries
Installbatteriescorrectly.
PushKnobin to startthe cleancycle.(GreenLEDshouldbeginto
flash)
No LED'swill illuminate
•
DeadBattery
•
ReplaceBatteries
RedLED nextto battery
symbolis illuminated
•
LowBatteryStrength
•
Prepareto replacebatteries(NOTE:Cleancyclewill operatewith
a weak battery.
25
Troubleshooting - Electronic Ignition
SECTIONI
Nosparksappearat
• Batterynot installed
anyelectrodeswhen
properly.
ElectronicIgnitionButton
is pressed;no noise can
be heardfromspark
, Deadbattery.
module.
, Checkbatteryorientation.
• Installbattery(makesurethat "+"and "-"
connectorsare orientedcorrectly,with "+"end up
and "-" enddown.)
, Has batterybeen used
previously?
• Replacebatterywith newAA-sizealkalinebattery.
, Buttonassemblynot
installedproperly.
Checkto insurethreadsare
properlyengaged.Button
shouldtravelup and down
withoutbinding.
, Unscrewbuttoncap assemblyand reinstall,making
sure threadsare alignedand engagedfully.
, Faultysparkmodule.
If no sparksare generated
with new batteryand good
wire connections,moduleis
faulty.
, Replacespark moduleassembly.
SECTIONII
• Outputlead
Nosparksappearat
connectionsnot
any electrodeswhen
ElectronicIgnitionButton connected.
is pressed;noisecan
be heardfrom spark
module.
, Are outputconnectionson
and tight?
, Removeand reconnectall outputconnectionsat
moduleandelectrodes.
SECTIONill
Sparksare present
butnot at all
electrodesand/ornot
at fullstrength
, Are outputconnectionson
and tight?
, Removeand reconnectall outputconnectionsat
moduleandelectrodes.
26
• Outputlead
connectionsnot
connected.
, Arcingto grill away
from burner(s).
If possible,observegrill in
dark location.Operate
ignitionsystemand lookfor
arcingbetweenoutputwires
and grill frame.
• If sparksare observedotherthan fromburner(s),
wire insulationmay be damaged.Replacewires.
, Weakbattery.
All sparkspresentbutweak
or at slow rate.
, Replacebatterywith a newAA-sizealkalinebattery.
, Electrodesare wet.
Has moistureaccumulated
on electrodeand/orin burner
ports?
, Use papertowel to removemoisture.
, Electrodescrackedor
broken"sparksat
crack".
Inspectelectrodesfor
cracks.
, Replacecrackedor brokenelectrodes.
Please registeryourproductonline at:
(if you register online, you do not need to send in this registration card,)
PLEASEFiLL OUT THiS CARDAND ATTACH A COPYOF YOUR SALES RECEIPT. RETURN iT WiTHiN t0 DAYS OF PURCHASE.FAILURETO RETURN MAYAFFECT
YOUR WARRANTYCOVERAGE.FORWARRANTYSERVICE PROOFOF PURCHASEWiLL BE REQUIRED. THiS WARRANTYiS NON-TRANSFERABLE.
LLENE ESTATARJETAY DEVUELVALADENTRODE LOS 10 DIAS DE LACOMPRA. SI NO LADEVUELVE,PUEDEVERSEAFECTADA SU COBERTURA DE GARANTIA.
PARA EL SERVIClODE GARANTIAESNECESARIOQUE PRESENTESU COMPROBANTEDE COMPRA. CONSERVELAFACTURA. ESTA GARANTIA ES INTRANSFERIBLE.
VEUILLEZCOMPLETERCETTECARTE ET LARETOURNERDANS LES 10 JOURS SUIVANT L'ACHAT. LACOUVERTUREDEVOTRE GARANTIEPOURRAITEN ETRE
AFFECTEESI VOUS NE LE FAITESPAS. POUR OBTENIR LE SERVICESOUS GARANTIE,UNE PREUVED'ACHAT DOlT ETRE PRESENTEE.VEUILLEZ CONSERVER
VOTRE FACTURE.LA PRESENTEGARANTIEN'EST PAS TRANSFERABLE.
1 FirstName/Nornbre/Pr6nom
I I I I I I I I I I I I I I I I
Initiall|niciallinitia|e LastNamelApeliidolNomdefamilie
L_J
I I I I I I I I I I I I I I I I I I I I I I
Address(numberandstreet)/Direccibn(n0meroy calle)/Adresse(num6roet rue)
I!
II
II
II
!!
III!1
II
!!
II
AptNumber/N_de apart.INnd'appt.
II
III
City/Ciudad/Vi|le
I ! II
II
II
StatelEstadolPravince
I I I I I I I I ! I I I I I I I I ! ! I
II
II
Zip Code/C6digo
Zip/Codepostal
I I I
I I
I I I I
2 E=mailAddress/Direcci6n
de coffeeelectr6nice/Adresse61ectronique
If you voluntarily provide us with your email address, you give us permission to use your email address to send you offers that may interest you.
Sinos informa voluntariamente su direccion de coffee electr6nico, nos da permiso para usarlo a fin de enviarle ofertas qua pueden interesarle.
Si vous choisissez de nous fournir votre adresse e/ectronique, vous nous donnez la permission de I'utiliser pour vous faire part d'offres specialee susceptibles
de vous int_resser.
I
I
(Example:
yourname@yourhost.cam)
(Ejemplo:su nombre@suhost.cam)
3 PhoneNumber/N_meratelef6nico/Num6rede t61_phone
1 0 Attachcopyof yoursalesreceipthere
Adjunteaqui la capiade su
recibede cornpra
Veuillezattacher unecopiede
vatrere_u ici.
(Example: votrenom@votrehSte.com)
6 Dateof Purchase/Fecha
de compra/Datede I'achat
I I I I L__L_LJ _
I I I I I I I I I I I
IM PORTANT!/iIMPORTANTE!/IMPORTANT!
Write Serial Number and Model Number in spaces below.
Escriba en los espacios de abajo el nEsmerode serie
y el nEsmerode modelo.
Inscrivez le numero de s_rie et le num_ro de mod_le
dans los espaces ci-dessou&
7 Store Name/Nombrede la tienda/Norndu magasin
I I II
I !!
I I I II
I ! ! I I
8 PurchasePrice/Preciede compra/Prixd'achat
$1 I I I I .oo
5 YourGender/Sexo/Sexe
:
1. []
Male/Masculino/Masculin
9 Which product are you registering?
i,Qu_ producte est_ registrando?
Quel produit enregistrez-vous?
1. [] GasGdll/Parrilla a gas/Gril au gaz
2. [] Electric Grill/Parrilla el6ctrica/Gril 61ectrique
3. [] Smoker/Ahumador/Fumoir
4. [] Charcoal Grill/Parrilla a carb6n/Barbecue au charbon
5. [] Charcoal SmokeriAhumador a carb6n/Fumoir au charbon
2. []
Female/Femenino/F_minin
Mail to: /Envielo
Warranty Registration
a:
Department
P.O.Box 1240
Columbus, GA 31902-1240
6. [] Outdoor Fireplace/Chimenea para exteriores/Foyer ext6rieur
7. [] Cooker/Fryer/ CocinaJfreidora/ Cuiseur/Friteuee
8. [] OtheriOtro/Autre
Thank you for completing this questionnaire. Your answers will help us and other companies reach you with offers that may
interest you. if you prefer not to receive these offers, please check here[].
Graciaspar completar este cuestionario. Sus respuestas nos ayudar&n,a nosotros y a otras compaSias, a Ilegar a usted con
ofertas que puedan resultade de inter6s. Si prefiere no recibir estas ofertas, par favor marque aqui [].
Merci d'avoir bien voulu remplir ce questionnaire. Vos r@onses nous aideront et aideront d'autres compagnies _,vous
communiquer des of fres speciales susceptibles de vous int6resser. Si vous pr6f6rez ne pas recevoir d'informations
concernant ces of fres sp6ciales, veuillez cocher ici [].
27
• Register
your
Char-Broil
• Get information
about
• Our replacement
parts
• Reliable
customer
• Delicious
recipes
• Char-Broil
®on-line
• Sizzle On The Grill
• And much
® product
our products
support
store
E-newsletter
TM
more!
Please visit us at www.charbroil.com
Buy Online
link to find
maintenance
items,
Char-Broil
covers,
tools and accessories,
grill parts, as well as
®grills and cookers.
Offers section,
In addition
grilling
and click on the
We also have a Special
so be sure to check often
to the online
for specials
store, charbroil.com
deals.
offers you a
wealth of information
regarding
Char-Broil ® gas, charcoal,
electric, and new infrared grills and cookers.
Be sure to check out our many
forget
to sign up for our exciting
Grill TMto stay updated
latest happenings
grilling
newsletter
on new recipes,
here at Char-Broil
Charbroil.com
also offers on-line
Char-Broil ® products.
recipes
and don't
Sizzle on the
contests,
and the
®.
customer
Thank you for support,
HAPPY GRILLING!
support
for
and