Emerson MultiFlex CUB-TD Specifications

AM/FM Radio Receiving Function
Tuning into a Radio Station
Tuning into stations automatically
1. Press TUNER on the main unit several times to select either "AM" or
"FM".
2. Press TUNING MODE so that the "AUTO" indicator on the display lights.
3. Press TUNING to start Auto tuning.
Searching automatically stops when a station is found. When tuned
into a radio station, the " TUNED " indicator on the display lights. If
FM stereo broadcasting is tuned, the "FM STEREO" indicator lights.
No sound is output while the " TUNED " indicator is off.
When the signal from an FM radio station is weak: Radio wave may be
weak depending on the building structure and environmental conditions. In
that case, manually tune into the radio station of your choice by referring to
the next section.
Tuning into stations manually
1. Press TUNER on the main unit several times to select either "AM" or
"FM".
2. Press TUNING MODE so that the "AUTO" indicator on the display goes
off.
3. Press TUNING to select the desired radio station.
The frequency changes by 1 step each time you press the button. The
frequency changes continuously if the button is held down and stops
when the button is released. Tune by looking at the display.
To return the display to "AUTO": Press TUNING MODE again on the main
unit. A station is automatically tuned. Normally, leave the indicator in
"AUTO".
Tuning into stations by frequency
It allows you to directly enter the frequency of the radio station you want to
listen to.
1. Press TUNER on the remote controller several times to select either "AM"
or "FM".
2. Press D.TUN.
3. Using the number buttons, enter the frequency of the radio station within
8 seconds.
To enter 87.5 (FM), for example, press 8, 7, 5, or 8, 7, 5, 0. If you
entered a wrong number, press D.TUN and enter a correct one.
AM/FM Radio Receiving Function
Presetting an AM/FM Radio Station
It allows you to register up to 40 of your favorite AM/FM radio stations.
Registering radio stations in advance allows you to tune into your radio
station of choice directly.
Registering a Station
1. Tune into the AM/FM radio station you want to register.
2. Press MEMORY on the unit so that the preset number on the display
flashes.
3. Repeatedly press PRESET to select a number between 1 and 40
while the preset number is flashing (about 8 seconds).
4. Press MEMORY again to register the station.
When registering, the preset number stops flashing.
Repeat this procedure for all of your favorite AM/FM radio stations.
Selecting a Preset Radio Station
1. Press CH +/- on the remote controller to select a preset number.
Alternatively you can press PRESET on the main unit. You can
also select by directly entering the preset number with the number
buttons on the remote controller.
Deleting a Preset Radio Station
1. Press CH +/- on the remote controller to select the preset number to
delete.
2. Press and hold MEMORY on the main unit and press TUNING MODE to
delete the preset number.
When deleting, the number on the display goes off.
AM/FM Radio Receiving Function
Using RDS (European models)
RDS stands for Radio Data System and is a method of transmitting data in
FM radio signals.
RDS works only in areas where RDS broadcasts are available.
In some cases, the text information appeared on the display is not
identical to the content transmitted by the RDS station. Furthermore,
unexpected characters may be displayed when the unit receives
unsupported characters. However, this is not a malfunction.
If the signal from an RDS station is weak, the RDS data may be displayed
continuously or not at all.
PS (Program Service): Tuning into a radio station distributing Program
Service information displays the radio station name. Pressing DISPLAY
displays the frequency for 3 seconds.
RT (Radio Text): Tuning into a radio station transmitting Radio Text
information displays text on the display of the unit.
PTY (Program Type): Allows you to search for RDS stations by program
type.
TP (Traffic Program): Allows you to search for radio stations transmitting
traffic information.
Displaying Radio Text (RT)
1. Press RT/PTY/TP on the main unit once.
The Radio Text (RT) is displayed scrolling across the display. "No Text
Data" is displayed when no text information is available.
Searching by Type (PTY)
1. Press RT/PTY/TP on the main unit twice.
The current program type appears on the display.
2. Press
PRESET
to select the type of program to search for.
The following RDS station types are displayed:
None
News (News reports)
Affairs (Current affairs)
Info (Information)
Sport
Educate (Education)
Drama
Culture
Science (Science and technology)
Varied
Pop M (Pop music)
Rock M (Rock music)
Easy M (Middle of the road music)
Light M (Light classics)
Classics (Serious classics)
Other M (Other music)
Weather
Finance
Children (Children’s programmes)
Social (Social affairs)
Religion
Phone In
Travel
Leisure
Jazz (Jazz music)
Country (Country music)
Nation M (National music)
Oldies (Oldies music)
Folk M (Folk music)
Document (Documentary)
3. Press ENTER to search the radio stations of the selected type.
4. When the desired radio station is found, the station name on the display
flashes. Then, press ENTER again.
If no stations are found, the message "Not Found" is displayed.
Listening to Traffic Information (TP)
1. Press RT/PTY/TP on the main unit thrice.
When the traffic information is transmitted from the radio station you
selected, "[TP]" is displayed. "TP" only is displayed if no traffic
information is available.
2. Press ENTER to search a radio station distributing traffic information.
3. When such a radio station is found, searching stops and playing traffic
information starts.
"Not Found" is displayed if no radio station distributing traffic
information is found.
Playing Content from a USB Storage Device
Operation: You can set up by viewing the guidance displayed on the TV
screen. To display the guidance, you need to make HDMI connection
between the unit and TV. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your selection. To return to
the previous screen, press RETURN.
Playing Back
1. Press USB on the remote controller to select "USB".
2. Plug your USB storage device with the music files into the USB port of
the unit so that "USB" lights on the display.
If the "USB" indicator flashes, check whether the USB storage device
is plugged in properly.
Do not unplug the USB storage device while "Connecting..." is
appeared on the display. This may cause data corruption or
malfunction.
3. Press ENTER.
The list of folders and music files on the USB storage device is
displayed on the screen, select the folder with the cursors and press
ENTER to confirm your selection.
4. With the cursors, select the music file to play, and then press ENTER or
to start playback.
Listening to Internet Radio
About Internet Radio
Internet radio, also called net radio, web radio or streaming radio, is an audio
service accessible at the websites of service providers who distribute music
and audio programs in digital format. There are numerous websites all over
the world, from terrestrial station, special station to personal website that
provide such a service.
The unit comes preset with Internet radio stations (*) such as TuneIn for
you to enjoy these services, just by connecting the unit to the Internet.
* Network services or contents may become unavailable if the service
provider terminates its service.
Listening to Internet Radio
TuneIn
With more than 70,000 radio stations and 2 million on-demand programs
registered, TuneIn is a service where you can enjoy music, sports and news
from all over the world.
Operation: You can set up by viewing the guidance displayed on the TV
screen. To display the guidance, you need to make HDMI connection
between the unit and TV. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your selection. To return to
the previous screen, press RETURN.
Playing Back
1. Press NET on the remote controller to display NET TOP screen.
"NET" lights on the display.
Alternatively you can press HOME and select "Network Service" in the
HOME menu.
2. With the cursors, select "TuneIn", and then press ENTER to display
TuneIn top screen.
3. With the cursors, select a radio station or program and press ENTER to
start playing.
Regarding the TuneIn Menu
To display the TuneIn menu, press MENU or ENTER while playing a radio
station. Selecting the corresponding menu item with the cursors and
pressing ENTER allows you to perform the following operations:
Add to My Presets: Registers radio stations and programs in your "My
Presets" within TuneIn. This allows you to play registered radio stations
and programs with a simple operation. ("My Presets" is not displayed if it
is empty.)
Remove from My Presets: Deletes a radio station or program from your
"My Presets" within TuneIn.
Report a problem: Reports a problem or interactively solves a problem
related to TuneIn.
View Schedule: Displays the radio station or program schedule.
Clear recents: Clears all radio stations and programs from the "Recents"
within TuneIn. (This menu is displayed only when a radio station or
program inside the "Recents" is being played.)
Add to My Favorites: Registers radio stations and programs in "My
Favorites" of "Network Service". This allows you to play registered radio
stations and programs with a simple operation.
Regarding the TuneIn Account
Creating an account on the TuneIn website (tunein.com) and logging in it
from the unit allows you to automatically add radio stations and programs to
your "My Presets" on the unit as you save them on the website .
To display a radio station registered in "My Presets", you must log into
TuneIn from the unit. To log in, select "Login" - "I have a TuneIn account" in
the "TuneIn" top list on the unit, and then enter your user name and
password.
If you associate the device on My Page within the TuneIn website using
the registration code obtained by selecting "Login" - "Login with a
registration code" on the unit, you can log in without entering the user
name and password.
Listening to Internet Radio
Pandora®–Getting Started (U.S., Australia and New
Zealand only)
Pandora is a free, personalized Internet radio service that plays the music
you know and helps you discover music you’ll love.
Operation: You can set up by viewing the guidance displayed on the TV
screen. To display the guidance, you need to make HDMI connection
between the unit and TV. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your selection. To return to
the previous screen, press RETURN.
Playing Back
1. Press NET on the remote controller to display NET TOP screen.
The "NET" indicator on the display stays lit. To display the NET TOP
screen, you can alternatively press HOME, select "Network Service"
on the displayed HOME menu, and then press ENTER.
2. With the cursors on the remote controller, select "Pandora", and then
press ENTER.
3. Use / to select "I have a Pandora Account" or "I’m new to Pandora" and
then press ENTER.
If you are new to Pandora select "I’m new to Pandora". You will see an
activation code on your TV screen. Please write down this code. Go to an
Internet connected computer and point your browser to
www.pandora.com/onkyo. Enter your activation code and then follow the
instructions to create your Pandora account and your personalized
Pandora stations. You can create your stations by entering your favorite
tracks and artists when prompted. After you have created your account
and stations you can return to your Onkyo receiver and press ENTER to
begin listening to your personalized Pandora.
If you have an existing Pandora account, you can add your Pandora
account to your Onkyo receiver by selecting "I have a Pandora Account"
and logging in with your email and password.
If you want to use multiple user accounts, see "Using Multiple
Accounts". Login can be made from the "Users" screen.
4. To play a station, use / to select the station from your station list, and
then press ENTER. Playback starts and the playback screen appears.
Create a New Station
Enter the name of a track, artist, or genre and Pandora will create a unique
radio station for you based on the musical qualities of that track, artist, or
genre.
I like this track: Give a track "thumbs-up" and Pandora will play more
music like it.
I don’t like this track: Give a track "thumbs-down" and Pandora will ban
that track from the current station.
Why is this track playing?: Discover some of the musical attributes that
Pandora uses to create your personal radio stations.
I’m tired of this track: If you are tired of a track, you can put the track to
sleep and Pandora will not play it for one month.
Create station from this artist: Creates a radio station from this artist.
Create station from this track: Creates a radio station from this track.
Delete this station: This will permanently delete a station from your
Pandora account. All of your thumbs feedback will be lost should you
choose to re-create the station with the same track or artist.
Rename this station: Lets you rename the current radio station.
Bookmark this artist: Pandora will bookmark your favorite artist for your
profile on www.pandora.com.
Bookmark this track: Pandora will bookmark the current track and allow
you to buy them all from Amazon or iTunes in one step!
Add to My Favorites: Adds a station to My Favorites list.
PANDORA, the PANDORA logo, and the Pandora trade dress are
trademarks or registered trademarks of Pandora Media, Inc. Used with
permission.
Listening to Internet Radio
SiriusXM Internet Radio (North American only)
If you want to listen to the service, you must subscribe. To subscribe go to
www.siriusxm.com/internetradio with your computer. When you subscribe,
you will be provided with a username and password which has to be entered
into the AV receiver. To use SiriusXM Internet Radio, you must have your
AV receiver connected to the Internet. Using the remote control, follow these
steps:
Operation: You can set up by viewing the guidance displayed on the TV
screen. To display the guidance, you need to make HDMI connection
between the unit and TV. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your selection. To return to
the previous screen, press RETURN.
Playing Back
1. Press NET on the remote controller to display NET TOP screen.
The "NET" indicator on the display stays lit. To display the NET TOP
screen, you can alternatively press HOME, select "Network Service"
on the displayed HOME menu, and then press ENTER.
2. With the cursors on the remote controller, select "SiriusXM Internet
Radio", and then press ENTER.
3. Select "Sign In", and then press ENTER. If you have an existing SIRIUS
account, you can sign in by selecting "Sign In". Enter your user name and
password in the next keyboard screen, or in Web Setup. If you don’t know
your username or password, call Sirius XM at (888) 539-7474 for
assistance.
If you want to use multiple user accounts, see "Using Multiple
Accounts". Login can be made from the "Users" screen.
Using the keyboard screen
1 Use / / / and ENTER to enter your user name and password.
2 Select "OK".
3 Press ENTER. The "Confirm your entries" screen appears.
4 Press ENTER. "Please wait..." appears and then "SiriusXM Internet
Radio" screen appears which displays the category available for
selection.
4. Use / to select the category and then press ENTER. The channel list
screen for the selected category appears.
5. Use / to select the desired channel and then press ENTER.
The playback screen for the selected channel appears and you can listen
to SiriusXM Internet Radio. You can control the tracks with the buttons on
the remote control.
Enabled buttons:
, ,
,
Add to My Favorites: Adds a channel to My Favorites list.
Add to Presets: Adds the currently playing station to presets list.
Delete from Presets: Deletes the currently playing station from presets
list.
SiriusXM Internet Radio subscriptions are sold separately and are governed
by the Sirius Terms and Conditions (see www.sirius.com). Be sure to read
this agreement before you purchase your subscription.
Sirius, XM and all related marks and logos are trademarks of Sirius XM
Radio Inc. and its subsidiaries. All rights reserved.
Listening to Internet Radio
Slacker Personal Radio (North American only)
Operation: You can set up by viewing the guidance displayed on the TV
screen. To display the guidance, you need to make HDMI connection
between the unit and TV. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your selection. To return to
the previous screen, press RETURN.
Playing Back
1. Press NET on the remote controller to display NET TOP screen.
The "NET" indicator on the display stays lit. To display the NET TOP
screen, you can alternatively press HOME, select "Network Service"
on the displayed HOME menu, and then press ENTER.
2. With the cursors on the remote controller, select "Slacker Personal
Radio", and then press ENTER.
3. If you do not have an account, create one on the Slacker website
(www.slacker.com) with your computer. If you already have a Slacker
account, select "Sign in to your account" and then press ENTER. The
4.
5.
6.
7.
8.
keyboard screen appears. You can enter information from the remote
control or the keys on the main unit.
If there are no mistakes in the information you have entered, use / / /
to select "OK" then press ENTER. An account information confirmation
screen appears.
If you do not have an account, select "Access without Sign In" and press
ENTER to use a restricted version of the service. Note that use will be
restricted.
If you want to use multiple user accounts, see "Using Multiple
Accounts". Login can be made from the "Users" screen.
Use / to select a menu item and then press ENTER. To sign out, use /
to select "Sign out" from this screen and then press ENTER.
Use / to select a station and then press ENTER or
to start playback
from the station. The playback screen appears.
You can control the tracks with the buttons on the remote control.
Enabled buttons:
, , ,
Rate Song as Favorite: Stores information to server, making it more
likely that the song will be played again.
Ban Song: Stores information to server, making it less likely that the
song will be played again.
Ban Artist: Stores information to server, making it less likely that the
songs from this artist will be played again.
Mark Favorite: Adds the currently playing station to your favorites.
Unmark Favorite: Deletes the currently playing station from your
favorites.
Add song to Library: Adds the currently playing track to your library.
Delete song from Library: Deletes the currently playing track from your
library.
Add to My Favorites: Adds a station or song to My Favorites list.
Using Multiple Accounts: The AV receiver supports multiple user accounts,
which means you can freely switch between several logins. After registering
user accounts, login is performed from the "Users" screen.
Press MENU while the Users screen is displayed. "Add new user", "Remove
this user" menu appear. You can either store a new user account, or delete
an existing one.
Some of the services don’t allow the use of multiple user accounts.
You can store up to 10 user accounts.
To switch between accounts you must first log out from the current
account, and log in again on the "Users" screen.
Listening to Internet Radio
Registering Other Internet Radios
To listen to other Internet radio program, register the program in the "My
Favorites" list on the NET TOP screen as described below. The unit supports
Internet radio stations stored in the following formats: PLS (URL ending in
.pls), M3U (URL ending in .m3u) and RSS (URL ending in rss/rdf/xml).
You can register up to 40 Internet radio stations.
Depending on the data type and file format for playback, you may not be
able to play an Internet radio station even when its format is PLS, M3U or
Podcast (RSS).
Available services may vary depending on your area of residence.
Operation: You can set up by viewing the guidance displayed on the TV
screen. To display the guidance, you need to make HDMI connection
between the unit and TV. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your selection. To return to
the previous screen, press RETURN.
Registering a Station
Before operation: The name and URL of the additional radio station will be
needed for this procedure. Check the specifications before use.
1. Press NET on the remote controller to display NET TOP screen.
"NET" lights on the display.
2. With the cursors, select "My Favorites", and then press ENTER to display
the "My Favorites" list screen.
3. With the cursors, select a blank area of "My Favorites" and press MENU
to display the menu screen.
4. With the cursors, select "Create new station", and then press ENTER to
display a keyboard screen.
5. Enter the name and URL of the radio station to add.
Select "Shift" and press ENTER to toggle between upper and lower
case. Select " " or " " and press ENTER to move the cursor to the
selected direction. Select "Back Space" and press ENTER to remove
a character on the left of the cursor.
Registering a Station with PC
Before operation: The name and URL of the additional radio station will be
needed for this procedure. Check the specifications before use.
1. Press RCV on the remote controller.
Always press RCV first to change the remote controller to RECEIVER
mode (the mode to operate this unit) since its mode may be changed
to operate another component.
2. Press HOME to display the HOME menu.
3. With the cursors, select "Setup", and then press ENTER.
4. With the cursors, select "7. Hardware Setup" - "Network" - "IP Address" to
display the IP address.
Write down the IP address since you will need it later.
5. Open the Internet browser on your PC or smartphone and enter the IP
address of the unit in the URL field.
If you are using Internet Explorer, you can also enter the URL by
selecting "Open..." on the "File" menu.
Information of the unit is displayed on the browser. ("WEB Setup")
6. Click "My Favorites" tab, then enter the name and URL of the Internet
radio station.
7. Click "Save" to register the entered Internet radio station in "My
Favorites".
To rename the registered radio station: When the radio station is selected
from the "My Favorites" list, press MENU to display the menu screen. Select
"Rename this station" with the cursors and press ENTER to display the
keyboard screen. Rename the station as desired.
Radio stations can be renamed also from "WEB Setup".
Playing a Registered Radio Station
1. Press NET on the remote controller to display NET TOP screen.
"NET" lights on the display.
2. With the cursors, select "My Favorites", and then press ENTER to display
the registered Internet radio stations.
3. With the cursors, select the radio station to delete and press MENU to
display the menu screen.
Deleting a Registered Radio Station
1. Press NET on the remote controller to display NET TOP screen.
"NET" lights on the display.
2. With the cursors, select "My Favorites", and then press ENTER to display
the registered Internet radio stations.
3. With the cursors, select the radio station to delete and press MENU to
display the menu screen.
4. With the cursors, select "Delete from My Favorites", and then press
ENTER. A confirmation screen will appear.
5. With the cursors, select "OK", and then press ENTER to delete the radio
station.
Select "Back" if you return to the previous screen.
Radio stations can be deleted also from "WEB Setup".
DLNA Music Streaming
About DLNA
Digital Living Network Alliance (DLNA) can be referred to as a technology
standard or the industry group to develop the technology standard to
interconnect and use AV components, computers and other devices in a
home network. This unit allows you to use DLNA to play music files stored
on a computer or a hard disk connected to your home network (NAS device).
Make sure this unit and a computer or NAS device are connected to the
same router.
To stream a music file, you need a NAS device with DLNA server
functions or a PC where a player (e.g., Windows Media® Player 11 or
Windows Media® Player 12) with DLNA server functions is installed. To
enable streaming with Windows Media® Player 11 or Windows Media®
Player 12, you must first configure the settings.
DLNA Music Streaming
Configuring the Windows Media® Player
Windows Media® Player 11
1. Turn on your PC and start Windows Media® Player 11.
2. In the "Library" menu, select "Media Sharing" to open a dialog box.
3. Select the "Share my media" check box, and then click "OK" to display a
list of supported devices.
4. Select this unit, and then click "Allow".
The corresponding icon is checked.
5. Click "OK" to close the dialog.
Windows Media® Player 12
1. Turn on your PC and start Windows Media® Player 12.
2. Click "Turn on media streaming" to display a list of players in the network.
If media streaming is already turned on, select "More streaming
options..." in the "Stream" menu to list players in the network. Proceed
to step 4.
3. Click "Turn on media streaming". A list of players in the network is
displayed.
4. Select this unit in "Media streaming options" and check that it is set to
"Allow".
5. Click "OK" to close the dialog.
DLNA Music Streaming
DLNA Playback
Operation: You can set up by viewing the guidance displayed on the TV
screen. To display the guidance, you need to make HDMI connection
between the unit and TV. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your selection. To return to
the previous screen, press RETURN.
Playing Back
1. Start the server (Windows Media® Player 11, Windows Media® Player 12,
or NAS device) storing the music files to play.
2. Press NET on the remote controller to display NET TOP screen.
"NET" lights on the display. If the "NET" indicator flashes, the unit is
not properly connected to the network. When using a wired LAN
connection, check the Ethernet cable connection, and when using a
wireless LAN connection, check whether the "Wi-Fi" indicator on the
left side of the unit stays lit.
3. Select "DLNA" with the cursors and press ENTER.
4. With the cursors, select the target server, and then press ENTER to
display a list of items on the selected server.
Searching does not work in servers that do not support search
functions.
The unit cannot access pictures and videos stored on servers.
Contents stored on the server may not be displayed depending on the
server sharing settings.
5. With the cursors, select the music file to play, and then press ENTER or
to start playback.
If "No Item" is displayed, check whether the network is properly
connected.
DLNA Music Streaming
Controlling Remote Playback from a PC
You can use this unit to play music files stored on your PC by operating the
PC inside your home network. The unit supports remote playback with
Windows Media® Player 12. To use the remote playback function with
Windows Media® Player 12, Windows Media® Player 12 must be configured
in advance.
Using a DLNA-compatible controller (such as an Android application), you
can select a music file stored on Windows Media® Player 12 and stream
to this unit by operating the controller. For information on how to remotely
play using the controller, refer to the controller's instruction manual.
Setting PC
1. Turn on your PC and start Windows Media® Player 12.
2. In the "Stream" menu, select "Turn on media streaming" to open a dialog
box.
If media streaming is already turned on, select "More streaming
options..." in the "Stream" menu to list players in the network. Proceed
to step 4.
3. Click "Turn on media streaming" to display a list of players in the network.
4. Select this unit in "Media streaming options" and check that it is set to
"Allow".
5. Click "OK" to close the dialog box.
6. Open the "Stream" menu and check that "Allow remote control of my
Player..." is checked.
Remote playback
1. Turn on the power of the unit.
2. Turn on your PC and start Windows Media® Player 12.
3. Select the music file to play with Windows Media® Player 12 and rightclick.
To remotely play a music file on another server, open the target server
from "Other Libraries" and select the music file to play.
4. Select this unit in "Play to" and open the "Play to" window of Windows
Media® Player 12 to start to playback music file on the unit.
Operations during remote playback are possible from the "Play to"
window on the PC. The playback screen is displayed on the TV
connected to the HDMI output of the unit. If your PC is running on
Windows® 8, click "Play to", and then select this unit.
5. Adjust the volume using the volume bar on the "Play to" window.
Some times, the volume displayed on the remote playback window
may differ from that appeared on the display of the unit.
When the volume is adjusted from the unit, the value is not reflected in
the "Play to" window.
This unit cannot play music files remotely in the following conditions.
– It is using a network service.
– It is playing a music file on a USB storage device.
– "Agree" was not selected in the DISCLAIMER screen that was
displayed when the NET input was selected on the unit for the first
time.
Music Streaming from a Shared Folder
About Shared Folder
A shared folder is configured in a network device such as a PC or NAS (hard
disk connected to your home network) for access from other users.
You can play music files in a shared folder on your PC or NAS connected to
the same home network as that of the unit. To play music files in a shared
folder, you must first configure Windows® 8 or Windows® 7, Make sure the
unit and PC or NAS device are connected to the same router.
The sharing options must be configured and a shared folder created on
the PC in advance.
For information on how to configure the NAS device and create a shared
folder, refer to the NAS device's instruction manual.
Music Streaming from a Shared Folder
Setting PC
Configuring the Sharing Options
1. Select "Choose Home group and Sharing Options" on the "Control
Panel".
If the menu is not displayed, check whether "View by" is set to
"Category".
2. Select "Change advanced sharing settings".
3. Check whether the following radio buttons are selected in "Home or
Work":
"Enable network discovery"
"Turn on file and printer sharing"
"Turn on sharing so anyone with network access can read and write files
in the Public folders"
"Turn off password protected sharing"
4. Select "Save Changes" and click "OK" on the dialog box.
Creating a Shared Folder
1.
2.
3.
4.
5.
6.
Select the folder to share and right-click.
Select "Properties".
Select "Advanced Sharing" on the "Sharing" tab.
Select the "Share this folder" check box and click "OK".
Select "Share" for "Network File and Folder Sharing".
Select "Everyone" from the pull-down menu. Click "Add", and then
"Share".
To set user name and password to a shared folder, set "Permissions"
in "Advanced Sharing" on the "Sharing" tab.
Check whether a workgroup is set.
Music Streaming from a Shared Folder
Playing from a Shared Folder
Operation: You can set up by viewing the guidance displayed on the TV
screen. To display the guidance, you need to make HDMI connection
between the unit and TV. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your selection. To return to
the previous screen, press RETURN.
Playing Back
1. Press NET on the remote controller to display NET TOP screen.
"NET" lights on the display. If the "NET" indicator flashes, the unit is
not properly connected to the network. When using a wired LAN
connection, check the Ethernet cable connection, and when using a
wireless LAN connection, check whether the "Wi-Fi" indicator on the
left side of the unit is lit.
2. With the cursors, select "Home Media", and then press ENTER.
3. With the cursors, select the target server, and then press ENTER.
You can check the server name of your PC from the PC properties.
4. With the cursors, select the target shared folder, and then press ENTER.
5. If a username and password is required, enter the necessary login
information.
The login information is the account information set at the time of
creating the shared folder.
Once entered, the login information will be remembered from the next
time onward.
6. With the cursors, select the music file to play, and then press ENTER or
to start playback.
Using Remote Controller for Playing Music Files
About the Remote Controller
The remote controller of this unit allows you to play music files stored on
USB storage devices, Internet radio, PCs and NAS devices on your home
network, as well as on Bluetooth-enabled devices. It also allows you to view
information of the music file being played and perform various other
operations.
Available buttons may vary depending on the service and device to play.
Some buttons cannot be used with Bluetooth-enabled devices.
Furthermore, the Bluetooth-enabled devices must support the AVRCP
profile. Some devices may not be operated, even when they support
AVRCP profile.
Using Remote Controller for Playing Music Files
Remote Controller Buttons
1. Press INPUT SELECTOR (PC, NET, USB or BLUETOOTH) appropriate
for the input source on the remote controller.
2. Operate the remote controller by referring to the name and function of
each of the buttons below.
1 TOP MENU: This button displays the top menu for each media or
server.
2 / , ENTER: These buttons navigate through items and activate the
selected item.
/ : These buttons cycle through pages.
3
: This button fast-reverses the current track. This button is not
operable from 10 seconds before the playback ends.
4
: This button plays the current track from the beginning. Pressing
this button twice plays the previous track.
5 +/-: Moves the cursor on the Internet radio stations list in "My
Favorites".
6 MENU: This button displays the menu of each Internet radio service.
7 RETURN: This button returns to the previous screen.
8
: This button fast-forwards the current track. This button is not
operable from 10 seconds before the playback ends.
9
: This button plays the next track.
F
: This button starts the playback.
G : This button pauses the playback.
H SEARCH: This button toggles between the playback screen and list
screen during playback.
I : This button stops the playback.
J RANDOM: This button performs random playback.
K REPEAT: This button replays the track(or tracks). Pressing this button
repeatedly cycles through the repeat modes.
L DISPLAY: This button changes the displayed track information during
playback. Pressing this button when the list screen is displayed
toggles the screen to playback.
Bluetooth-enabled devices: Usable buttons are
,
,
, ,
,
, and .
Using Remote Controller for Playing Music Files
Icons Displayed during Playback
Icons are displayed on the display during music file playback. The meaning
of each icon is as follows:
: Folder
: Track
: Play
: Pause
: Fast-forward
: Fast-reverse
: Artist
: Album
: Repeat One Track
: Repeat within a folder
: Repeat
: Shuffle
Using the Listening Modes
Selecting Listening Mode
The listening modes allow you to select the best sound effect for your input
source.
1. Press RCV on the remote controller.
Always press RCV first to change the remote controller to RECEIVER
mode (the mode to operate this unit) since its mode may be changed
to operate another component.
2. Press one of the following buttons depending on your choice from among
the four listening modes.
Pressing a button changes the listening mode to that chosen. Set the
listening mode of your choice by listening to the actual sound.
For details on the types and difference of listening modes, see "Contents
of Listening Modes".
MOVIE/TV button
You can select a mode suitable for movies and TV programs.
Selectable listening modes:
All Ch Stereo
Direct
Dolby Atmos
Dolby D (Dolby Digital)
Dolby D+ (Dolby Digital Plus)
Dolby Surround
Dolby TrueHD
DSD
DTS
DTS 96/24
DTS Express
DTS-HD HR (DTS-HD High Resolution Audio)
DTS-HD MSTR (DTS-HD Master Audio)
ES Discrete (DTS-ES Discrete)
ES Matrix (DTS-ES Matrix)
Full Mono
Mono
Multichannel
Neo:6
Neo:6 Cinema
T-D (Theater-Dimensional)
TV Logic
MUSIC button
You can select a mode suitable for music.
Selectable listening modes:
All Ch Stereo
Direct
Dolby Atmos
Dolby D (Dolby Digital)
Dolby D+ (Dolby Digital Plus)
Dolby Surround
Dolby TrueHD
DSD
DTS
DTS 96/24
DTS Express
DTS-HD HR (DTS-HD High Resolution Audio)
DTS-HD MSTR (DTS-HD Master Audio)
ES Discrete (DTS-ES Discrete)
ES Matrix (DTS-ES Matrix)
Full Mono
Multichannel
Neo:6
Neo:6 Music
Orchestra
Pure Audio
Stereo
Studio-Mix
Unplugged
GAME button
You can select a mode suitable for games.
Selectable listening modes:
All Ch Stereo
Direct
Dolby Atmos
Dolby D (Dolby Digital)
Dolby D+ (Dolby Digital Plus)
Dolby Surround
Dolby TrueHD
DSD
DTS
DTS 96/24
DTS Express
DTS-HD HR (DTS-HD High Resolution Audio)
DTS-HD MSTR (DTS-HD Master Audio)
ES Discrete (DTS-ES Discrete)
ES Matrix (DTS-ES Matrix)
Full Mono
Neo:6
Game-Action
Game-Rock
Game-RPG
Game-Sports
Multichannel
T-D (Theater-Dimensional)
STEREO button
You can select a listening mode for stereo and all channel stereo sources.
Selectable listening modes:
All Ch Stereo
Stereo
PURE AUDIO button (on the main unit only) (European models)
The display and analog video circuit is cut off to switch the unit to Pure Audio
mode (European models) and provide purer sound. Selecting this mode
lights the PURE AUDIO indicator on the unit. Pressing the button again
reselects the previous listening mode.
Selecting Pure Audio for listening mode turns off the display and analog
video circuitry, but the video signals input through HDMI input are output
from HDMI output.
Using the Listening Modes
Contents of Listening Modes
Selectable listening modes will differ depending on the number of input
source channels and the actual speaker configuration. Listening modes
available when headphones are connected are: Pure Audio (European
models), Mono, Direct, and Stereo.
Lists in alphabetic order (A-Z)
All Ch Stereo
Ideal for background music, this mode fills the entire listening area with
stereo sound from the front, surround, and surround back speakers.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Direct
In this mode, audio from the input source is output as-is. For example, if a 2
ch source from a music CD is input, the output will be stereo, or if Dolby
Digital signal is input, the sound field will be controlled in accordance with
the number of channels present.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Dolby Atmos
Introduced first in the cinema, Dolby Atmos brings a revolutionary sense of
dimension and immersion to the Home Theater experience. Dolby Atmos is
an adaptable and scalable object based format that reproduces audio as
independent sounds (or objects) that can be accurately positioned and move
dynamically throughout the 3 dimensional listening space during playback. A
key ingredient of Dolby Atmos is the introduction of a height plane of sound
above the listener.
Surround back speakers or height speakers need to be installed.
This listening mode can be selected only if the input signal is Dolby
Atmos.
Dolby D
This mode is for use with Dolby Digital sources. The audio from the input
source is output as-is, without surround sound processing.
Input source: 5.1 ch
This listening mode can be selected only if your Blu-ray Disc/DVD player
is digitally connected to the unit or the player's output setting is bitstream.
Dolby D+
This mode is for use with Dolby Digital Plus sources. The audio from the
input source is output as-is, without surround sound processing.
Input source: 5.1 ch, 7.1 ch
This listening mode can be selected only if your Blu-ray Disc/DVD player
is digitally connected to the unit or the player's output setting is bitstream.
When playing back 3.1 ch or 5.1 ch sources from Blu-ray Discs, Dolby
Digital is automatically applied.
Dolby Surround
Dolby surround is a next generation surround technology that intelligently up
mixes stereo; 5.1 and 7.1 content for playback through your surround
speaker system. Dolby surround is compatible with traditional speaker
layouts, as well as Dolby Atmos enabled playback systems that employ inceiling speakers or products with Dolby speaker technology.
Input source: STEREO, 5.1 ch, 7.1 ch
Dolby TrueHD
This mode is for use with Dolby TrueHD sources. The audio from the input
source is output as-is, without surround sound processing.
Input source: 7.1 ch
This listening mode can be selected only if your Blu-ray Disc/DVD player
is digitally connected to the unit or the player's output setting is bitstream.
DSD
This mode is for use with DSD sources. The audio from the input source is
output as-is, without surround sound processing.
Input source: 5.1 ch
This unit supports DSD signals input through HDMI IN. However,
depending on the connected player, better sound is possible when output
from the PCM output of the player. In that case, configure the player for
PCM output.
This listening mode can be selected only if your Blu-ray Disc/DVD
player's output setting is DSD.
DTS
This mode is for use with DTS sources. The audio from the input source is
output as-is, without surround sound processing.
Input source: 5.1 ch
This listening mode can be selected only if your Blu-ray Disc/DVD player
is digitally connected to the unit or the player's output setting is bitstream.
DTS 96/24
This mode is for use with DTS 96/24 sources. The audio from the input
source is output as-is, without surround sound processing. With 96 kHz
sampling rate and 24-bit resolution, it provides superior fidelity.
Input source: 5.1 ch
Depending on the settings, this listening mode becomes DTS.
This listening mode can be selected only if your Blu-ray Disc/DVD player
is digitally connected to the unit or the player's output setting is bitstream.
DTS Express
This mode is for use with DTS Express sources. The audio from the input
source is output as-is, without surround sound processing.
Input source: 5.1 ch
This listening mode can be selected only if your Blu-ray Disc/DVD player
is digitally connected to the unit or the player's output setting is bitstream.
DTS-HD HR
This mode is for use with DTS-HD High Resolution Audio sources. The
audio from the input source is output as-is, without surround sound
processing.
Input source: 5.1 ch, 7.1 ch
This listening mode can be selected only if your Blu-ray Disc/DVD player
is digitally connected to the unit or the player's output setting is bitstream.
DTS-HD MSTR
This mode is for use with DTS-HD Master Audio sources. The audio from the
input source is output as-is, without surround sound processing.
Input source: 5.1 ch, 7.1 ch
This listening mode can be selected only if your Blu-ray Disc/DVD player
is digitally connected to the unit or the player's output setting is bitstream.
DTS Neo:6
This mode expands any 2 ch source for 5.1 ch multichannel surround
playback. It offers full-bandwidth on all channels, with great independence
between the channels. There are two variants for this mode: one ideal for
movies and another ideal for music.
– Neo:6 Cinema: Use this mode with any 2 ch movie.
Input source: STEREO
– Neo:6 Music: Use this mode with any 2 ch music source.
Input source: STEREO
– Neo:6: Use this mode to expand any 5.1 ch music source for 6.1 ch or
7.1 ch playback using Neo:6.
Input source: 5.1 ch
Surround back speakers need to be installed.
ES Discrete
This mode is for use with DTS-ES Discrete sources and enables 6.1 ch or
7.1 ch playback using surround back channel. Completely discrete seven
channels will improve spatial imaging and enable 360-degree sound
localization producing a sound crossing between the surround channels.
Input source: 6.1 ch
Surround back speakers need to be installed.
This listening mode can be selected only if your Blu-ray Disc/DVD player
is digitally connected to the unit or the player's output setting is bitstream.
Use on the DVD with DTS ES logo, particularly on the software
containing DTS-ES Matrix soundtrack.
Playback becomes DTS if no surround back speaker is connected.
ES Matrix
This mode is for use with DTS-ES Matrix soundtrack and enables 6.1 ch or
7.1 ch playback using matrix-encoded back channel.
Input source: 6.1 ch
Surround back speakers need to be installed.
This listening mode can be selected only if your Blu-ray Disc/DVD player
is digitally connected to the unit or the player's output setting is bitstream.
Use on the CD, DVD or LD with DTS ES logo, particularly on the software
containing DTS-ES Matrix soundtrack.
Playback becomes DTS if no surround back speaker is connected.
Full Mono
In this mode, all speakers output the same sound in mono, so the sound you
hear is the same regardless of where you are within the listening room.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Game-Action
In this mode, sound localization is distinct with emphasis on bass.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Surround speakers need to be installed.
Game-Rock
In this mode, sound pressure is emphasized to heighten live feel.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Surround speakers need to be installed.
Game-RPG
In this mode, the sound has a dramatic feel with a similar atmosphere to
Orchestra mode.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Surround speakers need to be installed.
Game-Sports
Suitable for audio source with much reverberation.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Surround speakers need to be installed.
Mono
Use this mode when watching an old movie with a mono soundtrack, or use
it to separately reproduce soundtracks in two different languages recorded in
the left and right channels of some movies. It is also suitable for DVDs or
other sources containing multiplexed audio.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Multichannel
This mode is for use with PCM multichannel sources. The audio from the
input source is output as-is, without surround sound processing.
Input source: 5.1 ch, 7.1 ch
Orchestra
Suitable for classical or operatic music, This mode emphasizes the surround
channels in order to widen the stereo image, and simulates the natural
reverberation of a large hall.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Surround speakers need to be installed.
Pure Audio (European models)
This mode reproduces the original sound accurately. Since the audio from
the input source is output without surround sound processing and the display
and video circuitry are turned off, possible noise sources are minimized for a
realistic audio reproduction.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
This mode cannot be selected when Zone 2 is active. Activating Zone 2
when this mode is selected, automatically switches the listening mode to
Direct.
Stereo
In this mode, sound is output from the front left and right speakers and
subwoofer.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Studio-Mix
Suitable for rock or pop music, Listening to music in this mode creates a
lively sound field with a powerful acoustic image, like being at a club or rock
concert.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Surround speakers need to be installed.
T-D
In this mode, you can enjoy a virtual playback of multichannel surround
sound even with only two or three speakers. This works by controlling how
sounds reach the listener’s left and right ears.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Good results may not be possible if there is too much reverb, so we
recommend that you use this mode in an environment with little or no
natural reverb.
TV Logic
Suitable for TV shows produced in a TV studio, This mode enhances the
surround effects to the entire sound to give clarity to voices and create a
realistic acoustic image.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Surround speakers need to be installed.
Unplugged
Suitable for acoustic instruments, vocals and jazz, This mode emphasizes
the front stereo image, giving the impression of being right in front of the
stage.
Input source: MONO, STEREO, 5.1 ch, 7.1 ch
Surround speakers need to be installed.
Using the Listening Modes
Checking the Input Format
You can check the audio format of the input signals. While audio from the
player is being input, press DISPLAY on the remote controller several times
to switch the information shown on the main unit display. If "Dolby D 5.1" is
displayed in Signal format, the Dolby Digital 5.1 ch signals are being input.
The number of channels is not displayed when the input signal format is
"Dolby Atmos".
Advanced Settings
How to Set
The unit allows you to configure advanced settings, such as to remap the
input and input selector, or configure various speaker settings in order to
provide even better experience. Make the settings in "Setup" of the HOME
menu.
Operation: You can set up by viewing the guidance displayed on the TV
screen. To display the guidance, you need to make HDMI connection
between the unit and TV. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your selection. To return to
the previous screen, press RETURN. To return to the HOME menu, press
HOME.
Operation
1. Press RCV on the remote controller.
Always press RCV first to change the remote controller to RECEIVER
mode (the mode to operate this unit) since its mode may be changed
to operate another component.
2. Press HOME to display the HOME menu.
3. With the /
cursors, select "Setup", and then press ENTER.
4. Press / to select the desired menu, and then press ENTER.
5. With the / / / cursors, select the desired item to configure the settings.
When "ENTER" is displayed on the setting item, press ENTER.
To save changes and finish the setting: Press HOME to exit.
Advanced Settings
1.Input/Output Assign
Monitor Out
The video input signals input to the unit will be converted when they are
output from the HDMI OUT jack to the TV so that their resolution can match
that of the TV used.
Monitor Out
Default Value: MAIN
Select the HDMI jack to connect the TV.
"MAIN": When connecting the TV to the HDMI OUT MAIN jack
"SUB": When connecting the TV to the HDMI OUT SUB jack
The resolution of the input signal does not change when output
through HDMI OUT SUB jack.
"MAIN+SUB": When connecting to both the MAIN and SUB jacks
Video signals input to the composite video input jack or the
COMPONENT VIDEO input jacks will be upconverted to HDMI
signals and then output from the HDMI output jack.
If "MAIN+SUB" is selected
– Only "Through" or "Auto" can be selected in "Resolution".
– The resolution of the input signal does not change when output
through HDMI OUT SUB jack.
The HDMI jack of this unit is compliant with HDCP2.2 (HDMI OUT
MAIN and HDMI IN3 jacks only).
Resolution
Default Value: Through
Specify the output resolution of the HDMI OUT jacks. The image
resolution of the unit will be converted so that it can match the
resolution supported by the TV used.
"Through": The output resolution will be the same as that of the input
signals.
"Auto": The resolution will automatically be converted according to
the resolution supported by the TV.
"480p (480p/576p)", "720p", "1680×720p", "1080i", "1080p",
"2560×1080p": Select the desired resolution.
"4K": About four times as high resolution as 1080p (3840×2160 or
4096×2160 pixels depending on the resolution supported by the
connected TV)
If "1080p" is selected, 1080p/24 input signals will be output with
an unchanged resolution.
If the selected resolution is not supported by the monitor, the
video is output in the same resolution as the input signal.
If "4K" is selected, video signals may not be output to some types
of TV. For details, see "Supported Video Resolution of HDMI OUT
MAIN/SUB Jacks" in "Reference Information".
If "Monitor Out" is set to "SUB", this setting will be set to
"Through".
You can check the video on the TV while making this setting.
Select the value with the cursors and press ENTER. Press
RETURN if no video is displayed. (except when "NET", "USB" or
"BLUETOOTH" is selected)
HDMI Input
It is possible to change assignment of input selector buttons and the HDMI
IN jacks.
BD/DVD
Default Value: HDMI 1
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to
BD/DVD button. If you do not assign a jack, select "-----". To select an
HDMI IN jack already assigned to another input selector, change its
setting to "-----" first.
CBL/SAT
Default Value: HDMI 2
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to
CBL/SAT button. If you do not assign a jack, select "-----". To select an
HDMI IN jack already assigned to another input selector, change its
setting to "-----" first.
STB/DVR
Default Value: HDMI 3 (HDCP 2.2)
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to
STB/DVR button. If you do not assign a jack, select "-----". To select an
HDMI IN jack already assigned to another input selector, change its
setting to "-----" first.
GAME
Default Value: HDMI 4
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to GAME
button. If you do not assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector, change its setting to "----" first.
PC
Default Value: HDMI 5
"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to PC
button. If you do not assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector, change its setting to "----" first.
AUX
Default Value: Front/MHL
The setting cannot be changed.
TV/CD
Default Value: ----"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to TV/CD
button. If you do not assign a jack, select "-----". To select an HDMI IN
jack already assigned to another input selector, change its setting to "----" first.
PHONO
Default Value: ----"HDMI 1" to "HDMI 6": Desired HDMI IN jack can be assigned to
PHONO button. If you do not assign a jack, select "-----". To select an
HDMI IN jack already assigned to another input selector, change its
setting to "-----" first.
Component Video Input
CBL/SAT button is assigned to COMPONENT VIDEO IN jack as factory
default setting. This assignment can be changed if necessary. If you do not
assign a jack, select "-----".
BD/DVD
Default Value: ----"COMPONENT": COMPONENT VIDEO IN jack is assigned to BD/DVD
button.
CBL/SAT
Default Value: COMPONENT
"COMPONENT": COMPONENT VIDEO IN jack is assigned to CBL/SAT
button.
STB/DVR
Default Value: ----"COMPONENT": COMPONENT VIDEO IN jack is assigned to
STB/DVR button.
GAME
Default Value: ----"COMPONENT": COMPONENT VIDEO IN jack is assigned to GAME
button.
PC
Default Value: ----"COMPONENT": COMPONENT VIDEO IN jack is assigned to PC
button.
AUX
Default Value: ----The setting cannot be changed.
TV/CD
Default Value: ----"COMPONENT": COMPONENT VIDEO IN jack is assigned to TV/CD
button.
PHONO
Default Value: -----
"COMPONENT": COMPONENT VIDEO IN jack is assigned to PHONO
button.
When you convert video signals input to the COMPONENT VIDEO IN
jacks and output them from the HDMI OUT jack, set the output resolution
of the player to 480i. If the input has 480p or higher resolution, an error
message will appear.
When "1. Input/Output Assign" - "Monitor Out" is set to "SUB", the
480i/576i component signals only will be output with an unchanged
resolution. Video will not be displayed if the TV does not support the
resolution.
When "1. Input/Output Assign" - "Monitor Out" is set to "MAIN" or
"MAIN+SUB" and "Resolution" is set to "Through", the 480i/576i
component signals will be output with their resolution unchanged. So, TV
sets not supporting these resolutions will not be able to display video.
Composite Video Input
It is possible to change assignment of input selector buttons and the
COMPOSITE VIDEO IN V1 to 3 jacks.
BD/DVD
Default Value: ----"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN V jack can
be assigned to BD/DVD button. If you do not assign a jack, select "----".
CBL/SAT
Default Value: VIDEO 1
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN V jack can
be assigned to CBL/SAT button. If you do not assign a jack, select "----".
STB/DVR
Default Value: VIDEO 2
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN V jack can
be assigned to STB/DVR button. If you do not assign a jack, select "----".
GAME
Default Value: VIDEO 3
"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN V jack can
be assigned to GAME button. If you do not assign a jack, select "-----".
PC
Default Value: ----"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN V jack can
be assigned to PC button. If you do not assign a jack, select "-----".
AUX
Default Value: ----The setting cannot be changed.
TV/CD
Default Value: ----"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN V jack can
be assigned to TV/CD button. If you do not assign a jack, select "-----".
PHONO
Default Value: ----"VIDEO 1" to "VIDEO 3": Desired COMPOSITE VIDEO IN V jack can
be assigned to PHONO button. If you do not assign a jack, select "-----".
When "1. Input/Output Assign" - "Monitor Out" is set to "SUB", the
480i/576i composite signals only will be output with an unchanged
resolution. Video will not be displayed if the TV does not support the
resolution.
When "1. Input/Output Assign" - "Monitor Out" is set to "MAIN" or
"MAIN+SUB" and "Resolution" is set to "Through", the 480i/576i
composite signals will be output with their resolution unchanged. So, TV
sets not supporting these resolutions will not be able to display video.
Digital Audio Input
It is possible to change assignment of input selector buttons and the
DIGITAL IN COAXIAL 1 to 2/OPTICAL jacks.
BD/DVD
Default Value: COAXIAL 1
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can
be assigned to BD/DVD button. If you do not assign a jack, select "----".
CBL/SAT
Default Value: COAXIAL 2
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can
be assigned to CBL/SAT button. If you do not assign a jack, select "----".
STB/DVR
Default Value: ----"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can
be assigned to STB/DVR button. If you do not assign a jack, select "----".
GAME
Default Value: ----"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can
be assigned to GAME button. If you do not assign a jack, select "-----".
PC
Default Value: ----"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can
be assigned to PC button. If you do not assign a jack, select "-----".
AUX
Default Value: ----The setting cannot be changed.
TV/CD
Default Value: OPTICAL
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can
be assigned to TV/CD button. If you do not assign a jack, select "-----".
PHONO
Default Value: -----
"COAXIAL 1", "COAXIAL 2", "OPTICAL": Desired DIGITAL IN jack can
be assigned to PHONO button. If you do not assign a jack, select "-----".
Supported sampling rates for PCM signals (stereo, mono) from a digital
input are 32 kHz/44.1 kHz/48 kHz/88.2 kHz/96 kHz/16 bit, 20 bit, 24 bit.
Advanced Settings
2.Speaker Setup
Allows you to change the speaker configuration such as existence of
subwoofer, crossover frequency, and so on. Settings are automatically
configured if you use the Automatic Speaker Setup.
Furthermore, you will not be able to select this setting if you have a pair of
headphones connected or you are listening through your TV speakers.
Speaker Settings
Change the impedance of the connected speakers, the type of front speaker
connection and height speaker type.
Speaker Impedance (European models)
Default Value: 6ohms
Set the impedance of the connected speakers.
"4ohms": When any of the connected speakers have 4 Ω or more to
less than 6 Ω impedance
"6ohms": When the connected speakers all have 6 Ω or more
impedance
Front Speakers Type
Default Value: Normal
Select the type of front speaker connection.
"Normal": When front speakers are connected in a normal manner
"Bi-Amp": When front speakers are bi-amp connected
Height Speakers Type
Default Value: Not Use
Set the speaker type if height speakers are connected to the
SPEAKERS BACK or HEIGHT terminals. Select from the following
options according to the type and layout of the connected speakers:
"Not Use", "Front High", "Top Front", "Top Middle", "Dolby Enabled
Speaker (Front)", or "Dolby Enabled Speaker (Surround)".
If "Front Speakers Type" is set to "Bi-Amp", this setting will be set to
"Not Use".
"Dolby Enabled Speaker (Surround)" cannot be selected if "Speaker
Configuration" - "Surround" is set to "None".
Powered Zone 2
Default Value: No
Set presence of speaker terminal connection of Zone 2
"Yes": When speakers are connected to ZONE2 speaker terminals
"No": When speakers are not connected to ZONE2 speaker terminals
If "Front Speakers Type" is set to "Bi-Amp", this setting will be set to
"No".
For impedance, check the indications on the back of the speakers or their
instruction manual.
Speaker Configuration
Allows you to change the speaker configuration such as presence or not of
each speaker, crossover frequency, and so on. Settings are automatically
configured if you use the Automatic Speaker Setup. Audio will not be output
while you are making this setting.
Subwoofer
Default Value: Yes
Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Front
Default Value: 100Hz
Select the frequency to start outputting frequencies (crossover
frequency) for each channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"Front" will be fixed to "Full Band" if "Subwoofer" is set to "No", and
the bass frequencies of the other channels will be output from the
front speakers. To make the settings, refer to the instruction manual
of the speakers used.
Center
Default Value: 100Hz
Select the frequency to start outputting frequencies (crossover
frequency) for each channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
"Full Band" can only be set if "Front" is set to "Full Band".
Surround
Default Value: 100Hz
Select the frequency to start outputting frequencies (crossover
frequency) for each channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
"Full Band" can only be set if "Front" is set to "Full Band".
Back
Default Value: 100Hz
Select the frequency to start outputting frequencies (crossover
frequency) for each channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is connected
In any of the following cases, this setting will be set to "None".
– "Surround" is set to "None".
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Height Speakers Type" is set to other than
"Not Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
"Full Band" can only be set if "Surround" is set to "Full Band".
Back ch
Default Value: 2ch
Select the number of channels of the connected surround back
speaker.
"1ch": When one speaker is connected (Connect to the BACK or
HEIGHT L terminal)
"2ch": When two speakers are connected
The setting cannot be changed if "Back" is set to "None".
Height
Default Value: None
Select the frequency to start outputting frequencies (crossover
frequency) for each channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
In any of the following cases, this setting will be set to "None".
– "Speaker Settings" - "Height Speakers Type" is set to "Not Use".
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
If any type is selected in "Speaker Settings" - "Height Speakers
Type", this setting will be set to "100Hz" as default value. In this
case, this setting cannot be set to "None".
"Full Band" can only be set if "Front" is set to "Full Band".
LPF of LFE
Default Value: 120Hz
Set the low-pass filter for LFE (low-frequency effect) signals in order to
pass lower frequency signals than the set value and thus cancel
unwanted noises. The low-pass filter will be effective only on sources
with LFE channel.
Set a frequency from "80Hz" to "120Hz".
"Off": Do not use this function
Double Bass
Default Value: ----Boost bass output by feeding bass sounds from the front left and right,
and center speakers to the subwoofer.
"On": Bass output will be boosted.
"Off": Bass output will not be boosted.
The setting will not automatically be configured even if you
performed the automatic speaker setup.
If "Subwoofer" is set to "No" or if "Front" is set to other than "Full
Band", the setting will be fixed to "-----".
Speaker Distance
Set the distance from each speaker to the listening position. Settings are
automatically configured if you use the automatic speaker setup.
Unit
Default Value: feet/meters
Specify the unit of distance for configuring settings.
"feet": When setting in feet (0.1ft to 30.0ft, in increments of 0.1ft)
"meters": When setting in meters (0.03m to 9.00m, in increments of
0.03m)
Front Left
Default Value: 12.0ft/3.60m
Specify the distance between each speaker and the listening position.
Center
Default Value: 12.0ft/3.60m
Specify the distance between each speaker and the listening position.
Front Right
Default Value: 12.0ft/3.60m
Specify the distance between each speaker and the listening position.
Surround Right
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
Back Right
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
The setting is not displayed if "Speaker Configuration" - "Back" is set
to other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
Back Left
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
The setting is not displayed if "Speaker Configuration" - "Back" is set
to other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
Back
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
The setting is displayed if "Speaker Configuration" - "Back" is set to
other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed when "Speaker Settings" - "Powered
Zone 2" is set to "Yes" and Zone 2 is turned on.
Surround Left
Default Value: 7.0ft/2.10m
Specify the distance between each speaker and the listening position.
Subwoofer
Default Value: 12.0ft/3.60m
Specify the distance between each speaker and the listening position.
Height Left
Default Value: 9.0ft/2.70m
Specify the distance between each speaker and the listening position.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height Speakers Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
Height Right
Default Value: 9.0ft/2.70m
Specify the distance between each speaker and the listening position.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height Speakers Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
When the speaker is set to "No" or "None" in "Speaker Configuration", the
settings for "Speaker Distance" cannot be changed:
Default values vary depending on the regions.
Level Calibration
Adjust the level of each speaker with the built-in test tone. Settings are
automatically configured if you use the Automatic Speaker Setup.
Front Left
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
Center
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
Front Right
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
Surround Right
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
Back Right
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
The setting is not displayed if "Speaker Configuration" - "Back" is set
to other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
Back Left
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
The setting is not displayed if "Speaker Configuration" - "Back" is set
to other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Front Speakers Type" is set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
Back
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
The setting is displayed if "Speaker Configuration" - "Back" is set to
other than "None" and also "Back ch" is set to "1ch".
This setting cannot be changed when "Speaker Settings" - "Powered
Zone 2" is set to "Yes" and Zone 2 is turned on.
Surround Left
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
Subwoofer
Default Value: 0 dB
Select a value between "-15 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
Height Left
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height Speakers Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
Height Right
Default Value: 0 dB
Select a value between "-12 dB" to "+12 dB". A test tone will be output
each time you change the value. Select the desired level.
This setting cannot be changed in any of the following cases.
– "Speaker Settings" - "Height Speakers Type" is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set to "Yes" and also
Zone2 is set to on.
In the following cases, the settings for "Level Calibration" cannot be
changed:
– The speaker is set to "No" or "None" in "Speaker Configuration".
– Mute (MUTING) is set.
Advanced Settings
3.Audio Adjust
Configure various settings related to sound, such as settings for listening to
multiplex audio or multilingual TV broadcasts and sound field settings for
listening modes.
Multiplex/Mono
Multiplex Input Channel
Default Value: Main
Set the audio channel or language to be output when playing multiplex
audio or multilingual TV broadcasts etc.
"Main": Main channel only
"Sub": Sub channel only
"Main/Sub": Main and sub channels will be output at the same time.
If multiplex audio is being played, "1+1" will be displayed when
DISPLAY is pressed.
Mono Input Channel
Default Value: Left+Right
Set the input channel to use for playing any 2 ch digital source such as
Dolby Digital, or 2-ch analog/PCM source in the Mono listening mode.
"Left": Left channel only
"Right": Right channel only
"Left+Right": Left and right channels
Dolby
Make the settings for Dolby listening mode.
Loudness Management
Default Value: On
Enable the Late Night function that allows you to enjoy surround sound
of Dolby TrueHD playback even in low volume.
"On": Use this function
"Off": Do not use this function
Center Spread
Default Value: Off
Adjust the width of the front sound field created during Dolby Surround
listening mode playback.
"On": The sound field is spread to left and right.
"Off": The sound field is centralized.
The setting will be fixed to "Off" if "Speaker Configuration" - "Center"
is set to "None".
DTS
Make the settings for DTS Neo:6 Music listening mode.
Neo:6 Music
Center Image
Default Value: 2
Adjust the width of the sound field of the front channel when playing in
the DTS Neo:6 Music listening mode.
"0" to "5": Selecting a smaller value brings the sound field of the front
channel to the center while selecting a larger value spreads the sound
field of the front channel to left and right.
Theater-Dimensional
Make the settings for Theater-Dimensional mode.
Listening Angle
Default Value: Wide
Set the angle of the front left and right speakers relative to the listening
position when playing in the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
Values recommended for "Listening Angle" are: 20° when "Narrow" is
selected and 40° when "Wide" is selected.
Advanced Settings
4.Source Setup
Adjust the volume level difference among the multiple devices connected to
this unit, rename an input selector, or adjust the image quality. The setting
can be separately set to each input selector button. When you select a
desired input to check the video or audio, start playback of the connected
device.
AccuEQ Room Calibration
AccuEQ Room Calibration
Default Value: Off
Enable/disable the sound field set in automatic speaker setup
"On": Enable this function
"Off": Disable this function
In the following cases, the setting cannot be changed:
– Automatic speaker setup is not performed.
– Headphones are connected.
IntelliVolume
IntelliVolume
Default Value: 0 dB
Adjust the volume level difference between the devices connected to
the unit. Select a value between "-12 dB" to "+12 dB". Set a negative
value if the volume of the target device is larger than the others and a
positive value if smaller.
This function is not effective in Zone 2.
Name Edit
Set an easy name to each input. The set name will be shown on the main
unit display.
Name
Default Value: Input name
1. Select a character or symbol with the cursors and press ENTER.
Repeat it to input 10 or less characters.
"Shift": Switches between upper and lower cases. (Pressing +10 on
the remote controller also toggles between upper and lower cases.)
" " " ": Moves the cursor to the arrow direction.
"Back Space": Removes a character on the left of the cursor.
"Space": Puts a space.
Pressing CLR on the remote controller will remove all the input
characters.
2. After inputting, select "OK" with the cursors and press ENTER.
The input name will be saved.
To name a preset radio station, press TUNER on the remote controller,
select AM/FM and select the preset number.
It cannot be set if the input is "NET", "USB" or "BLUETOOTH".
Picture Adjust
Adjust the image quality. (Possible only when the video player is connected
to the HDMI OUT MAIN jack) If you adjust it by checking the video, press
ENTER. Press RETURN to return the screen to the previous status.
Wide Mode
Default Value: Auto
Set the aspect ratio.
"Auto": The aspect ratio will automatically be set according to the input
signals and the monitor output setting.
"4:3":
"Full":
"Zoom":
"Wide Zoom":
When a 3D or 4K video source is input, this setting is set to "Full".
Furthermore, for some resolutions, this setting may be disabled and
set to "Full".
Picture Mode
Default Value: Custom
An appropriate image quality setting for cinema or game will be
selected. You can also adjust each item to obtain your favorite image
quality.
"Custom": The items from "Game Mode" to "Color Temperature" below
can be adjusted as desired.
"Cinema": When the video source is cinema
"Game": When the video source is game
"Standard": The resolution will be changed but the image quality will not
be adjusted.
"Bypass": Both the resolution and image quality will not be adjusted.
If you select "Bypass", the on-screen display function will be
disabled.
Game Mode
Default Value: Off
Change to the setting suitable for game. Also correct the delay of
video signals of the game console if any.
"On": Use this function
"Off": Do not use this function
If you select "On", the delay will be corrected but the image quality
will be lower.
The setting will be fixed to "Off" if "1. Input/Output Assign" "Monitor Out" -" Resolution" is set to "4K".
Film Mode
Default Value: Auto
Change to the setting suitable for film.
"Auto": Image processing suitable for film will be executed.
"Video": "Film Mode" will not be applied and the input signals will be
processed as video source.
Edge Enhancement
Default Value: Off
Adjust the sharpness of the outline of image. Select from "Off",
"Low", "Mid" (Middle), and "High".
The setting will be fixed to "Off" if "Game Mode" is set to "On".
When the horizontal resolution of the output video is 2,000 TV
lines or more, this setting is set to "Off".
Noise Reduction
Default Value: Off
Reduces the noise of the screen. Select from "Off", "Low", "Mid"
(Middle), and "High".
The setting will be fixed to "Off" if "Game Mode" is set to "On".
Brightness
Default Value: 0
Adjust brightness of the screen. Select a value between "-50" to
"+50".
Contrast
Default Value: 0
Adjust contrast of the screen. Select a value between "-50" to "+50".
Hue
Default Value: 0
Correct hue of the screen. Select a value between "-50" to "+50".
Saturation
Default Value: 0
Adjust saturation of the screen. Select a value between "-50" to
"+50".
Color Temperature
Default Value: Normal
Set color temperature of the screen. Select from "Warm", "Normal"
and "Cool".
In the following cases, the settings for "Picture Adjust" cannot be
changed:
– "NET", "USB" or "BLUETOOTH" is selected.
– "1. Input/Output Assign" - "Monitor Out" is set to "SUB".
Press CLR on the remote controller if you return all the settings from
"Game Mode" through "Color Temperature" to their default value.
Audio Selector
Make the audio input setting. The setting can be separately set to each input
selector button. Select the input selector to configure.
Audio Selector
Default Value: –
Allows you to select prior input source.
"ARC": When giving priority to input signal from ARC compatible TV.
The setting can be selected only when "HDMI" - "Audio Return
Channel" is set to "Auto" and also the "TV/CD" input is selected.
"HDMI": When giving priority to input signal from HDMI jacks
The setting can be selected only when the input is assigned to the
HDMI IN jack in the "HDMI Input" setting.
"COAXIAL" (Coaxial input): When giving priority to input signal from
DIGITAL IN COAXIAL jacks.
The setting can be selected only when the input is assigned to the
COAXIAL jack in the "Digital Audio Input" setting.
"OPTICAL" (Optical input): When giving priority to input signal from
DIGITAL IN OPTICAL jacks.
The setting can be selected only when the input is assigned to the
OPTICAL jack in the "Digital Audio Input" setting.
"Analog": To always output analog audio independently of the input
signal
Fixed Mode
Default Value: Off
Specify an input signal when "HDMI", "COAXIAL (Coaxial input)", or
"OPTICAL (Optical input)" is selected for "Audio Selector". Set this
item if noise is produced, or truncation occurs at the beginning of a
track that follows a gap when playing PCM or DTS sources.
"Off": To play an analog signal when there is no digital signal.
"PCM": To fix the input source to PCM (except for Multichannel
PCM).
"DTS": To fix the input source to DTS (except for DTS-HD)
Changing "Audio Selector" changes the setting to "Off".
The setting cannot be changed when "PHONO", "TUNER", "NET", "USB"
or "BLUETOOTH" is selected.
Advanced Settings
5.Listening Mode Preset
You can preset your favorite listening mode to each input. (For example, you
can always apply straight decode to the Dolby TrueHD source of Blu-ray
Disc to play it in unchanged sound field.) Select the input, signal type and
listening mode.
Although it is possible to select the listening mode during playback, the
selected mode will be reset when the unit enters standby mode.
Analog/PCM
Default Value: Last Valid
Set the listening mode for playing PCM signals of CD and analog
signals of record and cassette tape.
Mono/Multiplex Source
Default Value: Last Valid
Set the listening mode for playing Dolby Digital and other digital signals
recorded in monaural or multiplex audio.
2ch Source
Default Value: Last Valid
Set the listening mode for playing Dolby Digital and other digital signals
recorded in 2 channels.
Dolby D/Dolby D Plus/TrueHD
Default Value: Last Valid
Set the listening mode for playing Dolby Digital, Dolby Digital Plus and
Dolby TrueHD signals.
DTS/DTS-ES/DTS-HD
Default Value: Last Valid
Set the listening mode for playing digital audio signals in DTS and DTSHD High Resolution formats. Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio source.
Other Multich Source
Default Value: Last Valid
Set the listening mode for playing DSD signals of DVD-Audio and
Super Audio CD that are input from HDMI IN jack.
Available listening modes vary depending on the input signal.
Setting "Last Valid" will always select the last selected mode.
Only "Analog" can be set to the "TUNER" input.
"Digital" and "TrueHD" can be set to the "NET" and "USB" inputs.
Only "Digital" can be set to the "BLUETOOTH" input.
Advanced Settings
6.Miscellaneous
Volume Setup
Make the detailed volume setting of the unit.
Maximum Volume
Default Value: Off
Set the maximum value to avoid too high volume. Select a value from
"Off", "30" to "79".
Power On Volume
Default Value: Last
Set the volume level of when the power is turned on. Select a value
from "Last" (Volume level before entering standby mode), "Min", "1" to
"79" and "Max".
You cannot set a higher value than that of "Maximum Volume".
Headphone Level
Default Value: 0 dB
Adjust the volume level difference between speakers and headphones.
Select a value between "-12 dB" to "+12 dB".
OSD Setup
Make the setting of on-screen display function that can display the setting
menu screen, volume operation screen and the like on the TV.
On Screen Display
Default Value: On
Set whether or not to display the operation screen on the TV.
"On": The operation screen will be displayed on the TV.
"Off": The operation screen will not be displayed on the TV.
The operation screen may not be displayed depending on the input
signal even if "On" is selected. If the operation screen is not
displayed, change the resolution of the connected device.
Language
Default Value: English
Select the on-screen display language.
Screen Saver
Default Value: 3min
Set the time to start the screen saver. Select a value from "3min",
"5min", "10min" and "Off".
Advanced Settings
7.Hardware Setup
Tuner
AM/FM Frequency Step (North American models)
Default Value: 10kHz/200kHz
Select a frequency step depending on your area of residence.
Select "10kHz/200kHz" or "9kHz/50kHz".
When this setting is changed, all radio presets are deleted.
Default values vary depending on the regions.
AM Frequency Step (European models)
Default Value: 9kHz
Select a frequency step depending on your area of residence.
Select "10kHz" or "9kHz".
When this setting is changed, all radio presets are deleted.
Default values vary depending on the regions.
HDMI
HDMI CEC (RIHD)
Default Value: Off
Setting to "On" enables the input selection link and other link functions
with HDMI connected CEC compliant device.
"On": Use this function
"Off": Do not use this function
Depending on the TV set, a link may need to be configured on the
TV.
This function is effective only when the device is connected to the
HDMI OUT MAIN terminal.
Setting to "On" and closing the on-screen menu displays the name
of the CEC-compatible components and "RIHD On" on the display.
Power consumption in standby mode may increase if "On" is set.
(Depending on the TV status, the unit will enter the normal standby
mode.)
If you operate the MASTER VOLUME control of the unit when this
setting is set to "On" and you are listening to the audio through the
speakers of your TV, audio will be output also from the speakers
connected to the unit. If you want to output from only either of them,
change the unit or TV settings, or reduce the volume of the unit.
If abnormal operation occurs when you set the setting to "On", set it
to "Off".
When connecting a non-CEC compatible component, or when you
are not sure whether it is compatible, set the setting to "Off".
When changing this setting, turn off and then on again the power of
all connected components.
HDMI Through
Default Value: Off
You can display the video of an HDMI connected player on the TV even
if the unit is in standby mode. This setting is effective only for an input
selector to which an HDMI jack is assigned in "HDMI Input". It cannot
be set to any other input selector unless an HDMI jack is assigned to it.
"Off": The setting is disabled. Video of device connected to any jack will
not be displayed.
"BD/DVD", "CBL/SAT", "STB/DVR", "GAME", "PC", "AUX", "TV/CD",
"PHONO": Video of the device connected to the HDMI IN jack assigned
to each input will be displayed on the TV.
"Last": Video of the device connected to the HDMI IN jack assigned to
the input selector that was selected immediately before the unit enters
standby mode will be displayed on the TV.
"Auto": Video of all the devices connected to the HDMI IN jacks will be
output to the TV.
"Auto (Eco)": Video of all the devices connected to the HDMI IN jacks
will be output to the TV. If you select this setting when using a CECcompatible TV, you can reduce the power consumption in standby
mode.
When "HDMI Through" is enabled, the power consumption
increases even when the unit is on standby. However, the increase
in power consumption is kept to a minimum by automatically
entering the HYBRID STANDBY mode, where only the essential
circuit is operating.
"Auto" and "Auto(Eco)" cannot be selected if "HDMI CEC (RIHD)" is
set to "Off".
When changing the setting, turn off and then on again the power of
all connected components.
Audio TV Out (MAIN)
Default Value: Off
You can enjoy audio through the speakers of the HDMI connected TV
while this unit is on.
"On": Use this function
"Off": Do not use this function
If you select "On", set "HDMI CEC (RIHD)" to "Off."
The setting is fixed to "Auto" if "HDMI CEC (RIHD)" is set to "On".
Listening mode cannot be changed if "Audio TV Out (MAIN)" is set
to "On" and audio is being output through the speakers of the TV.
Depending on your TV set or input signal of the component, audio
may not output through the speakers of the TV even if this setting is
set to "On". In such case, audio is output from the speakers of the
unit.
If you operate the MASTER VOLUME control of the unit when
"Audio TV Out (MAIN)" or "HDMI CEC (RIHD)" is set to "On" and
you are listening to the audio through the speakers of your TV, audio
will be output from the unit. If you do not want to output audio from
the unit, change the unit or TV settings, or reduce the volume of the
unit.
The setting is fixed to "Off" if "1. Input/Output Assign" - "Monitor Out"
is set to "SUB".
Audio TV Out (SUB)
Default Value: Off
You can enjoy audio through the speakers of the HDMI connected TV
while this unit is on.
"On": Use this function
"Off": Do not use this function
Listening mode cannot be changed while "Audio TV Out (SUB)" is
set to "On" and audio is being output through the speakers of the
TV.
Depending on your TV set or input signal of the component, audio
may not output through the speakers of the TV even if this setting is
set to "On". In such case, audio is output from the speakers of the
unit.
If you operate the MASTER VOLUME control of the unit when
"Audio TV Out (SUB)" or "HDMI CEC (RIHD)" is set to "On" and you
are listening to the audio through the speakers of your TV, audio will
be output from the unit.. If you do not want to output audio from the
unit, change the unit or TV settings, or reduce the volume of the unit.
The setting is fixed to "Off" if "1. Input/Output Assign" - "Monitor Out"
is set to "MAIN".
Audio Return Channel
Default Value: You can enjoy sound of the HDMI connected ARC compatible TV
through the speakers connected to the unit. To use this function, set
"HDMI CEC (RIHD)" to "On" in advance.
"Auto": When enjoying the TV sound through the speakers connected
to the unit
"Off": When not using the ARC function
Lip Sync
Default Value: On
This setting automatically corrects any desynchronization between the
video and audio signals based on data from the HDMI LipSync
compatible TV.
"On": Automatic correction will be enabled.
"Off": Automatic correction will be disabled.
InstaPrevue
Sub Window
Default Value: Multi
Change the preview display of the video input through HDMI, which will
be displayed using "InstaPrevue" in the HOME menu.
Set how to display preview thumbnails.
"Multi": Displays all the thumbnails of HDMI IN1, 2, 3, 4 and Front at
once.
"Single": Displays each thumbnail individually.
Depending on the video source, the preview thumbnails configured
in "InstaPrevue" may not be displayed properly.
InstaPrevue
Position
Default Value: Bottom/Lower Right
Change the preview display of the video input through HDMI, which will
be displayed using "InstaPrevue" in the HOME menu.
Set the position to display preview thumbnails.
When "Multi" is selected for "Sub Window": Select from "Top", "Bottom",
"Left" and "Right".
When "Single" is selected for "Sub Window": Select from "Upper Left",
"Upper Right", "Lower Left" and "Lower Right".
Depending on the video source, the preview thumbnails configured
in "InstaPrevue" may not be displayed properly.
Auto Standby
Auto Standby
Default Value: On/Off
This setting places the unit on standby automatically after 20 minutes of
inactivity without any video or audio input.
"On": The unit will automatically enter standby mode ("ASb" will light).
"Off": The unit will not automatically enter standby mode.
"Auto Standby" is appeared on the display and menu screen 30
seconds before the Auto Standby comes on.
"Auto Standby" does not work when Zone 2 is active.
Default values vary depending on the regions.
HDMI Through
Default Value: Off
Enable or disable "Auto Standby" while "HDMI Through" is on.
"On": The setting will be enabled.
"Off": The setting will be disabled.
This setting cannot be set to "On" if "Auto Standby" is set to "Off".
When "HDMI Through" is used, the power consumption increases even
when the unit is on standby. However, the increase in power consumption
is kept to a minimum by automatically entering the HYBRID STANDBY
mode, where only the essential circuit is operating.
Network
Make the network setting.
When LAN is configured with a DHCP, set "DHCP" to "Enable" to
configure the setting automatically. ("Enable" is set by default) To assign
fixed IP addresses to each components, you must set "DHCP" to
"Disable" and assign an address to this unit in "IP Address" as well as set
information related to your LAN, such as Subnet Mask and Gateway.
Network Standby
Default Value: Off
You can turn on the power of the unit via network using an application
such as Onkyo Remote.
"On": Use this function
"Off": Do not use this function
When "Network Standby" is used, the power consumption increases
even when the unit is on standby. However, the increase in power
consumption is kept to a minimum by automatically entering the
HYBRID STANDBY mode, where only the essential circuit is
operating.
Wi-Fi
Default Value: Off (Wired)
Connect the unit to network via wireless LAN router.
"On": Wireless LAN connection
"Off (Wired)": Wired LAN connection
Wi-Fi Setup
Default Value: –
You can configure wireless LAN settings by pressing ENTER when
"Start" is displayed.
Wi-Fi Status
Default Value: –
The information of the connected access point will be displayed.
"SSID": SSID of the connected access point.
"Security": Security method of the connected access point.
"Signal": Signal strength of the connected access point.
"Status": Status of the connected access point.
MAC Address
Default Value: –
This is the MAC address of the AV receiver.
This value is specific to the component and cannot be changed.
DHCP
Default Value: Enable
"Enable": Auto configuration by DHCP
"Disable": Manual configuration without DHCP
If selecting "Disable", you must set "IP Address", "Subnet Mask",
"Gateway", and "DNS Server" manually.
IP Address
Default Value: –
Displays/Sets the IP address.
Subnet Mask
Default Value: –
Displays/Sets the subnet mask.
Gateway
Default Value: –
Displays/Sets the gateway.
DNS Server
Default Value: –
Displays/Sets the primary DNS server.
Proxy URL
Default Value: –
Displays/Sets the proxy server URL.
Proxy Port
Default Value: –
Displays/Sets the proxy server port number when you enter "Proxy
URL".
Network Check
Default Value: –
You can check the network connection.
Press ENTER when "Start" is displayed.
Wait for a while if "Network" cannot be selected. It will appear when the
network function is started up.
Bluetooth
Bluetooth
Default Value: On
Select whether or not to use the Bluetooth function.
"On": Enables connection with a Bluetooth-enabled device by using the
Bluetooth function. Select "On" also when making various Bluetooth
settings.
"Off": When not using the Bluetooth function
Direct Change
Default Value: On
The input of the unit will automatically be switched to "BLUETOOTH"
when connection is made from a Bluetooth-enabled device to the unit.
"On": The input will automatically become "BLUETOOTH" when a
Bluetooth-enabled device is connected.
"Off": The function is disabled.
If the input is not switched automatically, set to "Off" and change the
input manually.
Auto Reconnect
Default Value: On
This function automatically reconnects to the Bluetooth-enabled device
connected last when you change the input selector to "BLUETOOTH".
"On": Use this function
"Off": Do not use this function
This function may not work depending on your Bluetooth-enabled
device.
Wakeup via Bluetooth
Default Value: Off
This function wakes up the unit on standby by connecting a Bluetoothenabled device.
"On": Use this function
"Off": Do not use this function
Setting to "On" increases the power consumption even when the unit
is on standby. However, the increase in power consumption is kept
to a minimum by automatically entering the HYBRID STANDBY
mode, where only the essential circuit is operating.
"Wakeup via Bluetooth" is fixed to "Off" if "Direct Change" is set to
"Off".
Pairing Information
Default Value: –
When paring is performed, the information of the previous pairing
stored in this unit will be initialized.
Pressing ENTER when "Clear" is displayed initializes the pairing
information stored in this unit.
This function does not initialize the pairing information on the
Bluetooth-enabled device. When pairing the unit again with the
device, be sure to clear the pairing information on the Bluetoothenabled device in advance. For information on how to clear the
pairing information, refer to the Bluetooth-enabled device's
instruction manual.
Device
Default Value: –
Displays the name of the Bluetooth-enabled device connected to the
unit.
The name is not displayed when "Status" is "Ready" and "Now
Pairing ...".
Status
Default Value: –
Displays the status of the Bluetooth-enabled device connected to the
unit.
"Ready": Not paired
"Now Pairing ...": Paired
"Connected": Successfully connected
Wait for a while if "Bluetooth" cannot be selected. It will appear when the
network function is started up.
Firmware Update
Update Notice
Default Value: Enable
Availability of a firmware update will be notified via network.
"Enable": Notify updates
"Disable": Do not notify updates
Version
Default Value: –
The current firmware version will be displayed.
Update via NET
Default Value: –
Press ENTER to select when you want to update the firmware via
network.
You will not be able to select this setting if you do not have
Internet access or there is nothing to update.
Update via USB
Default Value: –
Press ENTER to select when you want to update the firmware via
USB.
You will not be able to select this setting if a USB storage device
is not connected or there is nothing to update in the USB storage
device.
Wait for a while if "Firmware Update" cannot be selected. It will appear
when the network function is started up.
Initial Setup
You can make the initial setup from the setup menu.
Setting is not possible if "1. Input/Output Assign" - "Monitor Out" is set to
"SUB".
Wait for a while if "Initial Setup" cannot be selected. It will appear when
the network function is started up.
Advanced Settings
8.Remote Controller Setup
Remote ID
Default Value: 1
Select an ID for the unit's remote controller from "1", "2", and "3" to
prevent interference between the unit and other Onkyo components
that are installed in the same room. After changing the ID on the main
unit, change the ID on the remote controller accordingly with the
following procedure.
1. While holding down RCV, press Q SETUP for about 3 seconds until
the remote indicator lights.
2. With the number buttons, press one of 1, 2, and 3. The remote
indicator flashes twice.
Remote Mode Setup
Default Value: –
Input and register the remote controller code of other devices.
For registration of the remote control code, refer to "Operating Other
Components with the Remote Controller".
Advanced Settings
9.Lock Setup
Setup
Default Value: Unlocked
The Setup menu will be locked to protect the settings.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
Operating Other Components Using Remote Controller
Functions of REMOTE MODE Buttons
You can control any other device than this unit by programming a specified
remote control code to a REMOTE MODE button of the remote controller.
Register a remote control code to a desired REMOTE MODE button and
press it to enter the remote mode that allows you to operate the
corresponding device.
* The RCV and ZONE2 buttons cannot be programmed.
Operating Other Components Using Remote Controller
Programming Remote Control Codes
For information on the configuration and operation of Onkyo components
with RI jack, refer to "Connecting and Operating Onkyo RI Components".
Furthermore, the following REMOTE MODE buttons are preprogrammed
with remote control codes.
BD/DVD: Onkyo Blu-ray Disc/DVD player
TV/CD: Onkyo CD player
STB/DVR: Apple TV
Searching in the Setup Menu
You can search a remote control code and register it to a desired REMOTE
MODE button in the unit's Setup menu.
1. Press RCV and then press HOME on the remote controller.
2. With the cursors, select "Setup", and then press ENTER.
3. With the cursors, select "8. Remote Controller Setup" - "Remote Mode
Setup" and press ENTER.
4. With the cursors, select the remote mode for which you want to register a
remote control code and press ENTER to display the sub-category
selection screen.
5. With the cursors, select the target sub-category, and then press ENTER
to display the brand name input screen.
6. Select a character with the cursors and press ENTER. Repeat it to enter
the first three characters of the brand name.
7. With the cursors, select "Search", and then press ENTER.
After a search is done, the list of possible brand names is displayed. If
the brand name list is not displayed, select "Not Listed" with the
cursors and press ENTER to return to the brand name input screen in
step 6.
8. With the cursors, select the target brand name, and then press ENTER.
Once you decided the corresponding brand name, the remote control
code of the brand and how to register it will be displayed on the TV
screen.
9. Follow the guidance displayed on the TV screen.
10.If the component can successfully be operated with its registered remote
control code, select "OK" with the cursors and press ENTER.
Only TV remote control codes can be entered for TV.
Program a remote control code in accordance with the input since
each button also works as the input selector. (For example, when the
CD player is connected to the TV/CD jack, program the remote control
code for the CD player to TV/CD)
If the component cannot be operated, select "Try Next Code" with the
cursors and press ENTER to display another code.
It is possible to operate an MHL-enabled mobile device with the unit's
remote controller by registering the code of the MHL-enabled mobile
device below to the unit's remote controller. Operation may be
unstable or incorrect depending on the mobile device used.
33101 (North American models)
32910 (European models)
Consulting the Remote Control Code List
Find the remote control code in the remote control code list.
1. Look up the Remote Control Code List for the corresponding remote
control code.
The codes in the Remote Control Code List are those known as of the
date of publication and may be changed.
Only TV remote control codes can be entered for TV.
Program a remote control code in accordance with the input since
each button also works as the input selector. (For example, when the
CD player is connected to the TV/CD jack, program the remote control
code for the CD player to TV/CD)
2. Press DISPLAY for 3 or more seconds while holding down the REMOTE
MODE button to which you want to register the remote control code.
Once you entered the input mode, the remote indicator will light.
3. With the number buttons, enter the 5-digit remote control code within 30
seconds.
The registration is complete when the remote indicator flashes twice.
The remote indicator flashes once slowly when registering the remote
control code fails. Try the registration again.
Remapping the Colored Buttons
The colored button assignment on the AV receiver's remote controller can be
remapped to match that on the remote controller of the component whose
remote control code you programmed to REMOTE MODE. However, you will
not be able to remap the colored buttons if Zone 2 is selected.
1. Hold down the REMOTE MODE button to map and A (Red)
simultaneously until the remote indicator lights (about 3 seconds).
Remapping is possible only for codes included in the categories of the
Remote Control Code List such as DVD player and TV.
2. Within 30 seconds, press the colored buttons from left to right, in the
order you want to remap.
For example, if the colored buttons on the remote controller of the
other component are yellow, green, blue, and red from left to right,
press the buttons on the AV receiver's remote controller in that order.
Programming is complete when the remote indicator flashes twice.
The remote indicator flashes once slowly when programming the
remote control code fails. Try the remapping again.
Pressing any other button than a colored button cancels the remap
operation.
Resetting the REMOTE MODE Buttons
You can reset the remote control code registered in the REMOTE MODE
button to its default status. This operation can be executed on a single
REMOTE MODE button.
1. Press HOME for 3 or more seconds while holding down the REMOTE
MODE button you want to reset.
The remote indicator will light.
2. Within 30 seconds, press the REMOTE MODE button again.
Reset is complete when the remote indicator flashes twice.
To reset all the remote controller settings, while holding down RCV,
press and hold down HOME until the remote indicator lights (about 3
seconds). Press RCV again within 30 seconds. Reset is complete when the
remote indicator flashes twice.
Operating Other Components Using Remote Controller
TV operation
Press the REMOTE MODE button programmed with the remote control code
for the relevant AV component to switch the remote controller mode to that
for the AV component. Then, operate by using the corresponding buttons.
Available buttons vary depending on the product category of the component.
Operation may be incorrect or impossible depending on the product.
1 REMOTE MODE
2 , INPUT, VOL /
3 MUTING
4 CH +/-
5
6
7
8
9
F
GUIDE
/ / / , ENTER
SETUP
PREV CH
RETURN
AUDIO (*)
G
, , ,
,
,
,
(*)
H A (Red) (*), B (Green) (*), C (Yellow) (*), D (Blue) (*)
I Number 1 to 9, 0, +10
J CLR, DISPLAY
* Not CEC-compatible.
Operating Other Components Using Remote Controller
Blu-ray Disc player/DVD player/DVD recorder
operation
Press the REMOTE MODE button programmed with the remote control code
for the relevant AV component to switch the remote controller mode to that
for the AV component. Then, operate by using the corresponding buttons.
Available buttons vary depending on the product category of the component.
Operation may be incorrect or impossible depending on the product.
1 REMOTE MODE
2 SOURCE
3 MUTING
4 CH +/-, DISC +/-
5
6
7
8
9
F
TOP MENU
/ / / , ENTER
SETUP
MENU
RETURN
AUDIO (*)
G
, , ,
,
,
,
H A (Red) (*), B (Green) (*), C (Yellow) (*), D (Blue) (*)
I Number 1 to 9, 0, +10 (*)
J CLR, DISPLAY
* Not CEC-compatible. ("A (Red), B (Green), C (Yellow), D (Blue)" are
intended only for "DVD player/DVD recorder")
Operating Other Components Using Remote Controller
VCR/PVR operation
Press the REMOTE MODE button programmed with the remote control code
for the relevant AV component to switch the remote controller mode to that
for the AV component. Then, operate by using the corresponding buttons.
Available buttons vary depending on the product category of the component.
Operation may be incorrect or impossible depending on the product.
1 REMOTE MODE
2 SOURCE
3 MUTING
4 CH +/-
5
6
7
8
9
GUIDE
/ / / , ENTER
SETUP
PREV CH
RETURN
F
, , ,
,
,
,
G Number 1 to 9, 0, +10
H CLR, DISPLAY
Operating Other Components Using Remote Controller
Satellite receiver / Cable receiver operation
Press the REMOTE MODE button programmed with the remote control code
for the relevant AV component to switch the remote controller mode to that
for the AV component. Then, operate by using the corresponding buttons.
Available buttons vary depending on the product category of the component.
Operation may be incorrect or impossible depending on the product.
1 REMOTE MODE
2 SOURCE
3 MUTING
4 CH +/-
5
6
7
8
9
F
GUIDE
/ / / , ENTER
SETUP
PREV CH
RETURN
AUDIO
G
, , ,
,
,
,
H A (Red) B (Green), C (Yellow), D (Blue)
I Number 1 to 9, 0, +10
J CLR, DISPLAY
Operating Other Components Using Remote Controller
CD player operation
Press the REMOTE MODE button programmed with the remote control code
for the relevant AV component to switch the remote controller mode to that
for the AV component. Then, operate by using the corresponding buttons.
Available buttons vary depending on the product category of the component.
Operation may be incorrect or impossible depending on the product.
1 REMOTE MODE
2 SOURCE
3 MUTING
4 DISC +/-
5 / / / , ENTER
6 SETUP
7
, , ,
,
,
,
8 SEARCH, REPEAT, RANDOM, MODE
9 Number 1 to 9, 0, +10
F CLR, DISPLAY
Operating Other Components Using Remote Controller
Cassette tape deck operation
Press the REMOTE MODE button programmed with the remote control code
for the relevant AV component to switch the remote controller mode to that
for the AV component. Then, operate by using the corresponding buttons.
Available buttons vary depending on the product category of the component.
Operation may be incorrect or impossible depending on the product.
1 REMOTE MODE
2 SOURCE
3 MUTING
4
,
(Reverse Playback),
,
,
,
,
Operating Other Components Using Remote Controller
To operate CEC-compatible components
The TV and BD/DVD buttons on the remote controller are preprogrammed
with remote control codes for linked operation of some CEC (Consumer
Electronics Control)-compatible TV sets and Blu-ray Disk players. By
connecting to the unit via HDMI, you may operate them using the AV
receiver's remote controller.
If you cannot operate your CEC-compatible component, program one of
the following remote control codes to the TV or BD/DVD button.
TV: 11807/13100/13500 (CEC-compatible TV)
BD/DVD: 32910/33101/33501/31612 (CEC-compatible BD/DVD player)
Advanced Speaker Connection
Bi-Amping
It is possible to connect speakers supporting bi-amping to improve quality of
the low and high pitched ranges. Up to 5.2 ch will be played in bi-amping.
Connections
1. Connect as below using the FRONT terminals and BACK or HEIGHT
terminals.
2. Turn the unit on and make the bi-amping setting.
1 After pressing RCV, press HOME on the remote controller.
2 With the cursors, select "Setup", and then press ENTER.
3 With the cursors, select the order of "2. Speaker Setup" – "Speaker
Settings" – "Front Speakers Type".
4 Select "Bi-Amp" with the cursors and press ENTER.
Before bi-amping, be sure to remove the short-circuit connector
that connects the tweeter (high pitched tone) terminal and the
woofer (low pitched tone) terminal.
Use speakers supporting bi-amping only. For details, refer to the
speakers' instruction manual.
Connecting and Operating Onkyo RI Components
About RI Function
Connecting an Onkyo component with RI jack such as the separately sold RI
Dock to the unit by using an RI cable and an analog audio (RCA) cable
enables the following RI functions:
System On / Auto Power On: Starting playback on a component connected
via RI when the unit is on standby mode, automatically turns on the unit to
select the relevant component as its input source.
Direct Change: When playback is started on a component connected via RI,
the unit selects that component as the input source.
Remote Controller Operation: Allows you to operate RI-compatible Onkyo
components using the AV receiver's remote controller. Point the remote
controller at remote control sensor of the unit. This operation is possible only
when the RI remote control code is programmed.
Some components may not support all RI functions.
These functions do not work when Zone 2 is turned on.
For information on the RI functions, also refer to each component's
instruction manual.
Connecting and Operating Onkyo RI Components
RI Connection and Setting
Connect an Onkyo component with RI jack to this unit using an RI cable and
an analog audio (RCA) cable. For details, refer to the instruction manual of
the component with RI jack. The RI cable can be connected in any order.
When there are two RI jacks, both jacks work in the same way and are
interchangeable.
To connect the RI Dock or cassette tape deck via RI, you must:
Rename the input selector
To make the RI functions work, you must rename the input selectors on the
unit. Press TV/CD or GAME to display "TV/CD" or "GAME" on the main unit
display. Then press and hold TV/CD or GAME 3 seconds or more to switch
the display to "DOCK" or "TAPE".
Program the RI remote control code
Program the remote control code to any REMOTE MODE button on the
remote controller. This will allow you to operate the component by pointing
the remote controller at the unit instead of the component.
1. Press DISPLAY for 3 or more seconds while holding down the REMOTE
MODE button to which you want to program the remote control code.
The remote indicator will light.
The RCV, ZONE2, and TV buttons cannot be programmed.
2. With the number buttons, enter the following 5-digit remote control code
within 30 seconds.
RI Dock: 81993
Cassette tape deck with RI jack: 42157
Programming is complete when the remote indicator flashes twice.
The remote indicator flashes once slowly when programming the
remote control code fails. Try again.
Change the input selector on the RI Dock to "DOCK" or "TAPE". For
details, refer to the RI Dock's instruction manual.
To operate Onkyo components directly or Onkyo components that are not
connected via RI, use the following remote control codes:
Onkyo DVD player: 30627
Onkyo CD player: 71817
RI Dock: 82990
With some models, operation may be not possible in part or not possible
at all.
Connecting and Operating Onkyo RI Components
iPod/iPhone Operation
The RI Dock allows you to use the AV receiver's remote controller to operate
and play music on your iPod/iPhone. Moreover, it also allows you to view
videos on your iPod/iPhone on the screen of your TV, as well as perform RI
operations if connected via RI. This operation is possible only when the RI
remote control code is programmed.
Before Operation: Before performing any operation on your iPod/iPhone,
make sure to have it updated to the latest version via iTunes. Certain buttons
may not work for some iPod/iPhone models and generations, or RI Dock.
For details on the operation, refer to the RI Dock's instruction manual.
Switch the remote controller mode by pressing the REMOTE MODE button
programmed with the remote control code for the iPod/iPhone, and operate
by using the corresponding buttons. Point the remote controller at the unit.
1
2
3
4
5
REMOTE MODE
SOURCE
MUTING
VOL /
ALBUM +/-
6 TOP MENU
7 / / / , ENTER, PLAYLIST /
8 MENU
9
, , ,
,
,
F REPEAT, RANDOM
G MODE
H DISPLAY
,
Pressing DISPLAY turns on the backlight for a few seconds.
MODE allows you to use the Resume function to resume playing from the
song that was playing when you removed your iPod/iPhone from the DSA2 RI Dock.
Firmware Update
About Firmware Update
There are two methods for updating the firmware: via network and via USB.
Use the one that best suits your environment.
For the latest information on updates, visit the Onkyo website.
Before updating, make sure that the speaker setup microphone is not
connected.
During an update, do not
– Disconnect and reconnect any cable, USB storage device, speaker
setup microphone or headphones, or perform any operation on the
component such as turn off its power
– Access to this unit from a PC or smartphone using Android application
The update may take about 20 minutes to complete for either method: via
network or via USB.
Furthermore, existing settings are guaranteed regardless of the method
used for update.
Disclaimer: The program and accompanying online documentation are
furnished to you for use at your own risk.
Onkyo will not be liable and you will have no remedy for damages for any
claim of any kind whatsoever concerning your use of the program or the
accompanying online documentation, regardless of legal theory, and
whether arising in tort or contract.
In no event will Onkyo be liable to you or any third party for any special,
indirect, incidental, or consequential damages of any kind, including, but not
limited to, compensation, reimbursement or damages on account of the loss
of present or prospective profits, loss of data, or for any other reason
whatsoever.
Firmware Update
Updating the Firmware via Network
Before Start:
Check that the unit is turned on, and the connection to the Internet is
secured.
Turn off the controller component (PC etc.) connected to the network.
Stop any playing Internet radio, USB storage device, or server content.
If multi-zone function is active, press OFF on the unit to turn it off.
If "HDMI CEC (RIHD)" is set to "On", set it to "Off" (default value).
– After pressing RCV, press HOME on the remote controller. Select
"Setup" with the cursors and press ENTER. Then, after selecting
"7. Hardware Setup" - "HDMI" and pressing ENTER, select "HDMI
CEC (RIHD)" to select "Off".
* The description may differ from the on-screen display but that will not
change the way to operate or the function.
Update
1. After pressing RCV, press HOME on the remote controller.
The HOME menu is displayed on the TV screen.
2. With the cursors, select "Setup" - "7. Hardware Setup" - "Firmware
Update" - "Update via NET", and then press ENTER.
If "Firmware Update" is grayed out and cannot be selected, wait for a
while until it starts up.
You will not be able to select "Update via NET" if there is nothing to
update.
3. Press ENTER with "Update" selected to start update.
During the update, the TV screen may go black depending on the
updated program. In that case, check the progress on the display of
the unit. The TV screen will remain black until the update is complete
and the power is turned on again.
"Completed!" is displayed when the update is complete.
4. Press ON/STANDBY on the main unit to turn the unit into standby
mode. This is the end of the firmware update and you have now the latest
firmware installed.
Do not use RECEIVER on the remote controller.
If an Error Message is Displayed
When an error occurs, "*-** Error!" is appeared on the display of the unit.
("*" represents an alphanumeric character.) Check the following:
Error Code
*-01, *-10:
Ethernet cable not found. Connect the Ethernet cable properly.
*-02, *-03, *-04, *-05, *-06, *-11, *-13, *-14, *-16, *-17,
*-18, *-20, *-21:
Internet connection error. Check the following:
– Whether the router is turned on
– Whether this unit and router are connected to the network
Try to disconnect and then connect again the power to the unit and
router. This may solve the problem. If you are still unable to connect to
the Internet, the DNS server or proxy server may be temporarily down.
Check the service status with your ISP provider.
Others:
Disconnect then reconnect the AC power cord, from the beginning.
Firmware Update
Updating the Firmware via USB
Before Start:
Prepare a 64 MB or larger USB storage device.
– Media inserted in a USB card reader may not be used for this function.
– USB storage devices with security function are not supported.
– USB hubs and USB devices with hub function are not supported. Do
not connect these devices to the unit.
Delete any data stored on the USB storage device.
Turn off the controller component (PC etc.) connected to the network.
Stop any playing Internet radio, USB storage device, or server content.
If multi-zone function is active, press OFF on the unit to turn it off.
If "HDMI CEC (RIHD)" is set to "On", set it to "Off" (default value).
– After pressing RCV, press HOME on the remote controller. Select
"Setup" with the cursors and press ENTER. Then, after selecting
"7. Hardware Setup" - "HDMI" and pressing ENTER, select "HDMI
CEC (RIHD)" to select "Off".
* Some USB storage devices may take long to load, may not be loaded
correctly, or may not be correctly fed depending on the device or their
content.
* Onkyo will not be liable whatsoever for any loss or damage of data, or
storage failure arising from the use of the USB storage device with this
AV receiver. Thank you for your understanding.
* The description may differ from the on-screen display but that will not
change the way to operate or the function.
Update
1. Connect the USB storage device to your PC.
2. Download the firmware file from the Onkyo website to your PC and unzip.
Firmware files are named in the following way:
ONKAVR****_************.zip
Unzip the file on your PC. The number of unzipped files and folders
varies depending on the model.
3. Copy all unzipped files and folders to the root folder of the USB storage
device.
Make sure to copy the unzipped files.
4. Press USB on the remote controller to select "USB".
5. Connect the USB storage device to the USB port of the unit.
If you connect a USB hard disk drive to the USB port of the unit, we
recommend that you use its AC adapter to power it.
If the USB storage device has been partitioned, each section will be
treated as an independent device.
6. After pressing RCV, press HOME on the remote controller.
The HOME menu is displayed on the TV screen.
7. With the cursors, select "Setup" - "7. Hardware Setup" - "Firmware
Update" - "Update via USB", and then press ENTER.
If "Firmware Update" is grayed out and cannot be selected, wait for a
while until it starts up.
You will not be able to select "Update via USB" if there is nothing to
update.
8. Press ENTER with "Update" selected to start update.
During the update, the TV screen may go black depending on the
updated program. In that case, check the progress on the display of
the unit. The TV screen will remain black until the update is complete
and the power is turned on again.
During the update, do not turn off, or disconnect then reconnect the
USB storage device.
"Completed!" is displayed when the update is complete.
9. Disconnect the USB storage device from the unit.
10.Press ON/STANDBY on the main unit to turn the unit into standby
mode. This is the end of the firmware update and you have now the latest
firmware installed.
Do not use RECEIVER on the remote controller.
If an Error Message is Displayed
When an error occurs, "*-** Error!" is appeared on the display of the unit.
("*" represents an alphanumeric character.) Check the following:
Error Code
*-01, *-10:
USB storage device not found. Check whether the USB storage device or
USB cable is correctly inserted to the USB port of the unit.
Connect the USB storage device to an external power source if it has its
own power supply.
*-05, *-13, *-20, *-21:
The firmware file is not present in the root folder of the USB storage
device, or the firmware file is for another model. Retry from the download
of the firmware file.
Others:
Disconnect then reconnect the AC power cord, from the beginning.
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/off or
disconnecting/connecting the power cord, which is easier than working on
the connection, setting and operating procedure. Try the simple measures
on both the unit and the connected device. If the problem is that the video or
audio is not output or the HDMI linked operation does not work,
disconnecting/connecting the HDMI cable may solve it. When reconnecting,
be careful not to wind the HDMI cable since if wound the HDMI cable may
not fit well. After reconnecting, turn off and on the unit and the connected
device.
Troubleshooting
Resetting the unit
Resetting the unit to the status at the time of shipment may solve the
problem. If the measures above do not solve the problem, reset the unit with
the following procedure. If you reset the unit status, your preferences will be
reset to the defaults. Note them down before starting reset.
How to reset
1. While holding down CBL/SAT on the main unit (note that step 2 must be
performed with this button pressed down)
2. Press ON/STANDBY on the unit. "Clear" is appeared on the display and
the unit will enter standby mode.
How to reset the remote controller
1. While holding down 1 RCV on the remote controller (note that step 2
must be performed with this button pressed down)
2. Press and hold down 2 HOME until the 3 remote indicator lights (about
3 seconds). Within 30 seconds, press 1 RCV again.
Troubleshooting
Power
Can not turn on the unit
Make sure that the power cord is properly plugged into the wall outlet.
Unplug the power cord from the wall outlet, wait 5 seconds or more, then
plug it in again.
The unit turns off unexpectedly
The unit will automatically enter standby mode when Auto Standby has
been set and launches.
The unit turns off and after restoring the power, it turns off again
The protection circuit has been activated. Remove the power cord from
the wall outlet immediately. Make sure that all speaker cables and input
sources are properly connected, and leave the unit with its power cord
disconnected for 1 hour. After that, reconnect the power cord and turn the
power on. If the unit turns off again, avoid resetting it and unplug the
power cord. Then contact your Onkyo dealer.
Caution: If "CHECK SP WIRE" is appeared on the display, the speaker
cables may be shorting.
WARNING: If smoke, smell or abnormal noise is produced by the unit,
unplug the power cord from the wall outlet immediately and contact the
dealer or Onkyo Support.
Troubleshooting
Audio
There is no sound, or it is very quiet
Make sure that the proper input source is selected.
Make sure that connecting plugs are pushed in all the way.
Make sure that the inputs and outputs of all components are connected
properly.
Make sure that the polarity of the speaker cables is correct, and that no
bare wires are in contact with the metal part of speaker terminals.
Make sure that the input source is properly selected.
Make sure that the speaker cables are not shorting.
Check the volume. The volume level is adjustable between Min, 1 to 79,
Max (80). It is normal that the unit volume level is set up to 40 or around.
If the MUTING indicator on the display flashes, press MUTING on the
remote controller to unmute the unit.
While headphones are connected to the PHONES jack, no sound is
output from the speakers.
If there is no sound from a BD/DVD player connected to an HDMI IN,
check the BD/DVD player’s output settings, and be sure to select a
supported audio format.
Check the digital audio output setting on the connected component. On
some game consoles, such as those that support DVD, the default setting
is off.
With some DVD-Video discs, you need to select an audio output format
from a menu.
If your turntable uses an MC cartridge, you must connect an MC head
amp, or an MC transformer.
Make sure that none of the connecting cables are bent, twisted, or
damaged.
Not all listening modes use all speakers.
Specify the speaker distances and adjust the individual speaker levels.
Make sure that the speaker setup microphone is not still connected.
Set to "Off" if "Audio Selector" - "Fixed Mode" is set to "PCM" or "DTS".
Only the front speakers produce sound
When the Stereo or Mono listening mode is selected, only the front
speakers and subwoofer produce sound.
Make sure the speakers are configured correctly.
Only the center speaker produces sound
If you use the Dolby Surround listening mode with a mono source, such
as an AM radio station or mono TV program, the sound is concentrated in
the center speaker.
Make sure the speakers are configured correctly.
The surround speakers produce no sound
When the T-D (Theater-Dimensional), Stereo or Mono listening mode is
selected, the surround speakers produce no sound.
Depending on the source and current listening mode, not much sound
may be produced by the surround speakers. Try selecting another
listening mode.
Make sure the speakers are configured correctly.
The center speaker produces no sound
When the Stereo or Mono listening mode is selected, the center speaker
produces no sound.
Make sure the speakers are configured correctly.
There is no sound from surround back speakers or height speakers.
Depending on the source or current listening mode, not much sound may
be output from speakers. Try selecting another listening mode.
Make sure the settings for the speakers are made correctly.
The subwoofer produces no sound
When you play source material that contains no information in the LFE
channel, the subwoofer produces no sound.
Make sure the speakers are configured correctly.
There is no sound with a certain signal format
When listening to Dolby Digital and/or DTS sound, digital connection is
necessary.
Check the digital input terminal setting. If the connection is different from
the default, re-setting is necessary.
Check the digital audio output setting on the connected component. On
some game consoles, such as those that support DVD, the default setting
is off.
There is no sound with Dolby Atmos signal format
Make sure the surround back speakers or the height speakers are
connected and configured as connected in the "Speaker Configuration".
Make sure the input signal is the Dolby Atmos format.
Can not select the Pure Audio listening mode
(European models)
The Pure Audio listening mode can not be selected while Zone 2 is on.
Can not select a desired listening mode
Depending on the connecting status of the speaker, some listening
modes may not be selected. Check the details in "Using the Listening
Modes" section.
Can not play 5.2 ch
Make sure the speakers are configured correctly.
Not all listening modes use all speakers.
Can not get 6.2 ch/7.2 ch playback
6.2 ch/7.2 ch playback is not possible if surround back speakers and
height speakers are not connected.
Depending on the number of connected speakers, it is not always
possible to select all of the listening modes.
The speaker volume cannot be set as required
Check to see if a maximum volume has been set.
Noise can be heard
Using cable ties to bundle analog audio (RCA) cables with power cords,
speaker cables, etc. may degrade the audio performance, so refrain from
doing it.
An analog audio (RCA) cable may be picking up interference. Try
repositioning your cables.
The Late Night function does not work
Make sure the source material is Dolby Digital, Dolby Digital Plus, or
Dolby TrueHD.
About DTS signals
When DTS program material ends and the DTS bitstream stops, the unit
remains in DTS listening mode and the dts indicator remains on. This is
to prevent noise when you use the pause, fast forward, or fast reverse
function on your player. If you switch your player from DTS to PCM, you
may not hear any sound because the unit does not switch formats
immediately. In such case, you should stop your player for about 3
seconds and then resume playback.
With some CD and LD players, you will not be able to playback DTS
material properly even though your player is connected to a digital input
on the unit. This is usually because the DTS bitstream has been
processed (e.g., output level, sampling rate, or frequency response
changed) and the unit does not recognize it as a genuine DTS signal. In
such cases, you may hear noise.
Playing DTS program material, using the pause, fast forward, or fast
reverse function on your player may produce a short audible noise. This
is not a malfunction.
The beginning of audio received by an HDMI IN can not be heard
Since it takes longer to identify the format of an HDMI signal than it does
for other digital audio signals, audio output may not start immediately.
Troubleshooting
Video
There is no picture
Make sure that all video connecting plugs are pushed in all the way.
Make sure that each video component is properly connected.
If the TV is connected to the HDMI OUT jack of the unit, set "Monitor Out"
to "MAIN" or "SUB" according to the output jack. If the playback source is
connected to the composite video jack or component video jacks and you
want to output the video to the TV via the HDMI OUT jack, set "HDMI
Input" to "-----".
If the video source is connected to a component video input, you must
assign that input to an input selector, and your TV must be connected to
COMPONENT VIDEO OUT terminal.
If the video source is connected to a composite video input, your TV must
be connected to the MONITOR OUT V terminal.
If the video source is connected to an HDMI input, you must assign that
input to an input selector, and your TV must be connected to the HDMI
output(s).
While the Pure Audio (European models) listening mode is selected, the
analog video circuitry is turned off and only video signals input through
HDMI IN can be output.
Make sure the switching of input screens is proper at the monitor side
such as a TV.
When the image input from the composite video input terminal does not
get displayed, make sure that the component video input terminal is not
set to the selected input. If selected, images input from the composite
video input terminal can not be output to this input switching. If only
composite video input terminal connection is used, set the component
video input terminal to "-----".
Images of a component connected to the composite video input terminal
can not be output by converting on the monitor of a TV or other
components connected to COMPONENT VIDEO OUT terminal.
If the input selector to which the input from the TV connected to the HDMI
OUT SUB jack is connected is changed on this unit when "Monitor Out" is
set to "MAIN+SUB", or "MAIN" and when outputting to Zone 2, the video
from the TV connected to HDMI OUT MAIN stops displaying.
"Resolution" is effective only for the HDMI OUT MAIN jack if "Monitor
Out" is set to "MAIN+SUB".
There is no picture from a source connected to an HDMI IN
Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In
addition, video signals from a PC are not supported.
Check if "Resolution Error" is displayed on the main unit display when
video input via HDMI IN jack is not displayed. In this case, the TV does
not support the resolution of the video input from the player. Change the
setting on the player.
The on-screen menus do not appear
On your TV, make sure that the video input to which this unit is connected
is selected.
Set "On Screen Display" to "On" in "OSD Setup".
When the unit is not connected to a TV via HDMI OUT MAIN, on-screen
menus are not displayed.
Troubleshooting
Tuner
Reception is noisy, FM stereo reception is noisy, or the FM STEREO
indicator does not light
Re-check the antenna connection.
Relocate your antenna.
Move the unit away from your TV or PC.
Passing cars and airplanes can cause interference.
Concrete walls weaken radio signals.
Listen to the station in mono.
When listening to an AM station, operating the remote controller may
cause noise.
If nothing improves the reception, install an outdoor antenna.
Troubleshooting
Remote Controller
The remote controller does not work
Before operating this unit using remote controller, be sure to press RCV.
Make sure that the batteries are installed with the correct polarity.
Install new batteries. Do not mix different types of batteries, or old and
new batteries.
Make sure that the remote controller is not too far away from the unit, and
that there is no obstruction between the remote controller and the remote
control sensor of the unit.
Make sure that the unit is not subjected to direct sunshine or inverter-type
fluorescent lights. Relocate if necessary.
If the unit is installed in a rack or cabinet with colored-glass doors or if the
doors are closed, the remote controller may not work reliably.
Make sure you have selected the correct remote controller mode.
When using the remote controller to control other manufacturers’ AV
components, some buttons may not work as expected.
Make sure you have entered the correct remote control code.
Make sure to set the same ID on both the unit and remote controller.
Operating other Onkyo component by using a RI remote control code is
not available
Make sure that the Onkyo component is properly connected with RI
cable. When RI cable is used for connection, make sure to connect
analog audio (RCA) cable as well. (Connecting only an RI cable will not
be enough.)
Make sure you have selected the correct remote controller mode.
Make sure that the input display is correctly set.
Input the RI remote control code again.
When the RI remote control code is input, point the remote controller at
remote control sensor of the unit.
Can not operate Onkyo components (ones without RI connection) and
components of other makers
Make sure that the connection with other components is correct.
Input a correct remote control code again. If there are several codes, try
each code.
Make sure that the remote controller mode is correctly selected.
Operate the remote controller by setting toward the light receiving section
of each component.
Some components may not start the operation.
Troubleshooting
RI Dock for iPod/iPhone
There is no sound
Make sure your iPod/iPhone is actually playing.
Make sure your iPod/iPhone is properly inserted in the Dock.
Make sure the unit is turned on, the correct input source is selected, and
the volume is turned up.
Make sure the plugs are pushed in all the way.
Try resetting your iPod/iPhone.
There is no video
Make sure that your iPod/iPhone model’s TV OUT setting is set to On.
Make sure the correct input is selected on your TV or the unit.
Some versions of the iPod/iPhone do not output video.
The AV receiver’s remote controller does not control my iPod/iPhone
Make sure your iPod/iPhone is properly inserted in the Dock. If your
iPod/iPhone is in a case, it may not connect properly to the Dock. Always
remove your iPod/iPhone from the case before inserting it into the Dock.
The iPod/iPhone can not be operated while it is displaying the Apple logo.
Make sure you have selected the correct remote controller mode.
When you use the AV receiver’s remote controller, point it toward this
unit.
Before operating with the remote controller, you may need to play on your
iPod/iPhone to make the input selector be recognized.
Try resetting your iPod/iPhone.
Depending on your iPod/iPhone model and generation, some buttons
may not work as expected.
The unit unexpectedly selects my iPod/iPhone as the input source
Always pause iPod/iPhone playback before selecting a different input
source. If playback is not paused, the Direct Change function may select
your iPod/iPhone as the input source by mistake during the transition
between tracks.
iPod/iPhone does not work properly
Try reconnecting your iPod/iPhone.
Troubleshooting
Multi-zone Function
There is no sound
With multi-zone function, sound is output only when the signal input
source is an external component connected to the analog audio input
jacks of the unit, "NET", "USB", "BLUETOOTH", "AM" or "FM". Multi-zone
playback is not possible if the player and the unit are connected via HDMI
cable or digital cable. Connect the RCA audio output jacks of the player
and the analog audio input jacks of the unit with analog audio (RCA)
cable. Also analog audio output setting may be necessary on the player.
Troubleshooting
Wi-Fi (Wireless LAN) Network
Cannot access to Wi-Fi (Wireless LAN) network or sound playback is
interrupted and communication does not work
Try plugging/unplugging the power supply of wireless LAN router and the
unit, check the wireless LAN router power-on status, and try reboot of the
wireless LAN router.
The setting of SSID and encryption (WEP, etc.) is not correct. Make sure
the network settings of the unit is properly set.
Connection to an SSID that includes multi-byte characters is not
supported. Name the SSID of the wireless LAN router using single-byte
alphanumeric characters only and try again.
Can not receive radio wave due to a bad connection. Shorten the
distance from wireless LAN access point or remove obstacles for a good
visibility, and try again. Place the unit away from microwave ovens or
other access points. 2.4 GHz band for wireless LAN may not be enough.
Connect ETHERNET terminal of the unit and the router via an Ethernet
cable after selecting "7. Hardware Setup" - "Network" and changing "WiFi" to "Off (Wired)".
Place the unit away from the components emitting electromagnetic waves
on the 2.4 GHz band (microwave ovens, game consoles, etc.). If this
does not solve the problem, stop using other components which emit
electromagnetic waves.
When other wireless LAN devices are used near the unit, several issues
such as interrupted playback and communication may occur. You can
avoid these issues by changing the channel of your wireless LAN router.
For instructions on changing channels, see the instruction manual
provided with your wireless LAN router.
If there is a metallic object near the unit, wireless LAN connection may
not be possible as the metal can effect on the radio wave.
If there is more than one access point in the network, separate each
access point.
It is recommended to place the Wi-Fi router (access point) and the unit in
the same room.
The connection does not complete even when the automatic setting
button is pressed on the wireless LAN router
The wireless LAN router setting may be switched to Manual. Return the
setting to Auto.
Try the manual set-up. The connection may succeed.
On the list of SSID on the TV menu screen, there is no corresponding
SSID
When the wireless LAN router setting is at stealth mode (mode to hide
the SSID key) or when ANY connection is off, the SSID is not displayed.
Change the setting and try again.
Troubleshooting
Bluetooth
Music playback is unavailable on the unit even after successful Bluetooth
connection
Depending on the characteristics or specifications of your Bluetoothenabled device, playback on the unit is not guaranteed.
When the audio volume of your Bluetooth-enabled device is set low, the
playback of audio may be unavailable. Volume up the Bluetooth-enabled
device.
Depending on the Bluetooth-enabled device, Send/Receive selector
switch may be provided. Select Send mode.
Even when a music file is playing on the Bluetooth-enabled device, the
sound can not be played if the connection is not established with the unit.
Make sure that the unit is connected (this unit is selected as the sound
output destination).
Sound is interrupted
Problem may be occurring at the Bluetooth-enabled device. Check the
information on a webpage.
The audio quality is poor after connection with a Bluetooth-enabled
device
The Bluetooth reception is poor. Move the Bluetooth-enabled device
closer to the unit or remove any obstacle between the Bluetooth-enabled
device and this unit.
Can not connect with this unit
Try plugging/unplugging the power of the unit and try turning on/off the
Bluetooth-enabled device. Re-startup of the Bluetooth-enabled device
may be effective.
The Bluetooth-enabled device does not support the profiles required for
this unit.
The Bluetooth function of the Bluetooth-enabled device is not enabled.
Refer to the user manual of the Bluetooth-enabled device for how to
enable the function.
Near components such as microwave oven or cordless phone, which use
the radio wave in the 2.4 GHz range, a radio wave interference may
occur, which disables the use of this unit.
Bluetooth connection can not be built
When building a Bluetooth connection between this unit and your
Bluetooth-enabled device for the first time, if the connection fails, select
"7. Hardware Setup" - " Bluetooth", execute "Clear" in "Pairing
Information", turn off and then on again your Bluetooth-enabled device to
clear the device name, and build the connection again.
If there is a metallic object near the unit, Bluetooth connection may not be
possible as the metal can effect on the radio wave.
If the wireless LAN and Bluetooth connections are used at the same time,
try to connect the ETHERNET port and router with the Ethernet cable
after selecting "7. Hardware Setup" - "Network" and changing "Wi-Fi" to
"Off (Wired)" for a better connection.
The Auto Reconnect function does not work
This function may not work depending on your Bluetooth-enabled device.
In this case, play on your Bluetooth-enabled device after pairing with this
unit.
Troubleshooting
NET/USB Function
Can not access the network server
When NET is blinking, the AV receiver is not properly connected to the
home network.
Make sure your network server has been started up.
Make sure your network server is properly connected to the home
network.
Make sure your network server is correctly set.
Make sure that the router LAN side port is properly connected to the AV
receiver.
Make sure that the correct IP address is allocated in "7. Hardware Setup"
- "Network".
Playback stops while listening to music files on the network server
Make sure the network server is compatible with this unit.
When the PC is serving as the network server, try quitting any application
software other than the server software (Windows Media® Player 12 etc.).
If the PC is downloading or copying large files, the playback may be
interrupted.
Can not access the Internet radio
Certain network service or contents available through the unit may not be
accessible in case the service provider terminates its service.
If a specific radio station is unavailable for listening, make sure the
registered URL is correct, or whether the format distributed from the radio
station is supported by the AV receiver.
When NET is blinking, the AV receiver is not properly connected to the
home network.
Make sure that your modem and router are properly connected, and
make sure they are both turned on.
Make sure that connecting to Internet from other components is possible.
If connecting is not possible, turn off all components connected to the
network, wait for a while, and then turn on the components again.
Make sure that the router LAN side port is properly connected to the AV
receiver.
Make sure that the correct IP address is allocated in "7. Hardware Setup"
- "Network".
Depending on ISP, setting the proxy server is necessary.
Make sure that the used router and/or modem is supported by your ISP.
Can not connect to the AV receiver from a Web browser
Make sure that the IP address of the AV receiver is correctly input to the
Internet browser.
When DHCP is used for allocating the IP address, the IP address of this
AV receiver may have been changed.
Make sure that both AV receiver and PC are properly connected to the
network.
USB storage device is not displayed
Make sure that USB storage device and USB cable are securely plugged
to the USB port of this AV receiver.
Remove the USB storage device from the AV receiver once, and then try
re-connecting.
Performance of the hard disk that receives power from the USB port of
the unit is not guaranteed.
Depending on the type of format, the playback may not be performed
normally. Check the type of the file formats that is supported.
USB storage device with security functions may not be played.
Troubleshooting
Others
Power consumption in standby mode
In the following cases, the power consumption in standby mode may
reach up to a maximum of 5 W:
– When "Network Standby" in "7. Hardware Setup" - "Network" is set to
"On".
– When "HDMI CEC (RIHD)" is set to "On". (Depending on the TV
status, the AV receiver will enter normal standby mode.)
– The "HDMI Through" setting is set to other than "Off".
– When "Wakeup via Bluetooth" in "7. Hardware Setup" - "Bluetooth" is
set to "On".
The power consumption in standby mode may be larger than the value
above while the MHL (Mobile High-definition Link) enabled mobile device
connected to the AUX INPUT HDMI/MHL jack is being charged.
The sound changes when I connect my headphones
When a listening mode other than Direct, Pure Audio (European models),
or Mono is selected, connecting a headphone automatically selects
Stereo.
The display does not work
The display is turned off when the Pure Audio (European models)
listening mode is selected.
How do I change the language of a multiplex source
Select "Main" or "Sub" for "Multiplex Input Channel" in "3. Audio Adjust" "Multiplex/Mono".
The RI functions do not work
To use RI, you must make an RI connection and an analog audio (RCA)
connection between the component and AV receiver, even if they are
connected digitally.
While Zone 2 is selected, the RI functions do not work.
The functions System On/Auto Power On and Direct Change do not work
for components connected via RI
These functions do not work when Zone 2 is turned on.
When performing Automatic Speaker Setup, the measurement fails and
the message "Ambient noise is too high." is displayed.
This can be caused by a malfunction in your speaker unit. Check if the
unit produces normal sounds.
The display is dark
Make sure that Dimmer function is not working. Press DIMMER button
and change the brightness level of the display.
The following settings can be made for the composite video inputs
While holding down the input selector button to configure, press HOME
once at a time until "Video ATT: On" is appeared on the display. To
resume the setup, repeat the above described step until "Video ATT: Off"
is appeared on the display.
This setting is possible for input selectors assigned with one of the video
inputs "VIDEO 1" to "VIDEO 3" in "1. Input/Output Assign" - "Composite
Video Input". If you have a game console connected to the composite
video input, and the picture is not very clear, you can attenuate the gain.
Video ATT : Off: (default).
Video ATT : On: (Gain is reduced by 2 dB.)
If the picture on your TV/monitor connected to the HDMI output(s) is
unstable
Try turning the DeepColor function off.
To turn off the DeepColor function, press STB/DVR and ON/STANDBY
on the AV receiver simultaneously.
While holding down STB/DVR, press ON/STANDBY repeatedly until
"Deep Color: Off" is appeared on the display. To reactivate the
DeepColor function, repeat the above described step until "Deep Color:
On" is appeared on the display.
The AV receiver contains a microPC for signal processing and control
functions. In very rare situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet, wait at least 5
seconds, and then plug it back in.
Onkyo is not responsible for damages (such as CD rental fees) due to
unsuccessful recordings caused by the unit’s malfunction.
Before you record important data, make sure that the material will be
recorded correctly.
Before disconnecting the power cord from the wall outlet, set the AV receiver
to standby.
Reference Information
Linked Operation with CEC-compatible Components
The AV receiver is compatible with the following components (as of January
2014).
TV (Random order):
Toshiba TV sets
Sharp TV sets
Players/Recorders (Random order):
Onkyo and Integra RIHD-compatible players
Toshiba players and recorders
Sharp players and recorders (only when used together with Sharp TV
sets)
Models other than those mentioned above may have some interoperability if
compatible with CEC, which is part of the HDMI Standard, but operation can
not be guaranteed.
Note: For RI functions to work properly, do not connect more RIHDcompatible components than the quantities specified below, to the HDMI
jack. RI functions are not guaranteed when more RIHD-compatible
components than the below mentioned quantities are connected.
Furthermore, do not connect the AV receiver to another AV receiver/AV
amplifier via HDMI.
Blu-ray Disc/DVD players: up to 3.
Blu-ray Disc/DVD recorders: up to 3.
Cable TV tuner, terrestrial digital tuner, and satellite broadcasting tuner:
up to 4 units.
Reference Information
Checking whether the HDMI Linked Operation
Settings Are Enabled
1. Turn on the power of all connected components.
2. Turn off the power of the TV, and confirm that the power of the connected
components is turned off automatically with the link operation.
3. Turn on the power of the Blu-ray Disc/DVD player/recorder.
4. Start playback on the Blu-ray Disc/DVD player/recorder, and verify the
following:
The AV receiver automatically turns on, and selects the input to which
the Blu-ray Disc/DVD player/recorder is connected.
The TV automatically turns on, and selects the input to which the AV
receiver is connected.
5. Following the operating instructions of the TV, select "Use the TV
speakers" from the menu screen of the TV, and confirm that the audio is
output from the speakers of the TV, and not from the speakers connected
to the AV receiver.
6. Select "Use the speakers connected from the AV receiver" from the menu
screen of the TV, and confirm that the audio is output from the speakers
connected to the AV receiver, and not from the TV speakers.
Note:
Even if you set to output audio on the TV speakers, audio will be output
from the speakers connected to the AV receiver when you adjust the
volume or switch the input on the AV receiver. To output audio from the
TV speakers, redo the corresponding operations on the TV.
In case of an RIHD connection with RI and RI audio control compatible
components, do not connect the RI cable at the same time.
On the TV, when you select anything other than the HDMI jack to which
the AV receiver is connected, the input on the AV receiver will be
switched to "TV/CD".
The AV receiver will automatically power on in conjunction when it
determines it to be necessary. Even if the AV receiver is connected to an
RIHD compatible TV or player/recorder, it will not power on if it is not
necessary. It may not power on in conjunction when the TV is set to
output audio from the TV.
Linked system functions with the AV receiver may not work depending on
the component model connected. In such cases, operate the AV receiver
directly.
When the player/recorder cannot be operated with the remote controller
of the AV receiver, the corresponding component may not be
programmed to support the remote controller operation of CEC. Program
the remote control code of the component maker to the remote controller
for using.
Reference Information
About HDMI
HDMI (High Definition Multimedia Interface) is a digital interface standard for
connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and
other video components. Until now, several separate video and audio cables
have been required to connect AV components. With HDMI, a single cable
can carry control signals, digital video, and digital audio (2-channel PCM,
multichannel digital audio, and multichannel PCM).
The HDMI video stream (i.e., video signal) is compatible with DVI (Digital
Visual Interface) (*1), so TVs and displays with a DVI input can be
connected by using an HDMI-to-DVI adapter cable. (This may not work with
some TVs and displays, resulting in no picture.)
This unit supports HDCP (High-bandwidth Digital Content Protection) (*2),
so it can display picture only on HDCP-compatible components.
The HDMI on this unit supports the following functions:
Audio Return Channel, 3D, x.v.Color, DeepColor, Lip Sync, 4K (Upscaling
and Passthrough).
Supported Audio Formats of this Unit:
2-channel linear PCM (32 - 192 kHz, 16/20/24 bit)
Multichannel linear PCM (up to 7.1 ch, 32 - 192 kHz, 16/20/24 bit)
Bitstream (Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS, DTS-HD High Resolution Audio, DTS-HD Master Audio)
DSD
Your Blu-ray Disc/DVD player must also support HDMI output of the above
audio formats.
About Copyright Protection:
The HDMI jack of this unit is compliant with Revisions 1.4 and 2.2 (HDMI
OUT MAIN and HDMI IN3 jacks only) of the HDCP (High-bandwidth Digital
Content Protection) specification (*2), which is a copy-protection system for
digital video signals.
Other devices connected to this unit via HDMI must also be compliant with
HDCP.
*1 DVI (Digital Visual Interface): The digital display interface standard
set by the DDWG (*3) in 1999.
*2 HDCP (High-bandwidth Digital Content Protection): The video
encryption technology developed by Intel for HDMI/DVI. It is
designed to protect video content and requires a HDCP-compatible
HDMI/DVI receiver to display the encrypted video.
*3 DDWG (Digital Display Working Group): Lead by Intel, Compaq,
Fujitsu, Hewlett-Packard, IBM, NEC, and Silicon Image, this open
industry group’s objective is to address the industry’s requirements
for a digital connectivity specification for high-performance PC and
digital displays.
Note:
Some contents are only available for devices compliant with HDCP Rev.
2.2.
To view and listen to this kind of content, connect the TV or player
compliant with the HDCP Rev. 2.2 specification to the HDMI OUT MAIN
and HDMI IN3 jacks of this unit.
The HDMI video stream (i.e., video signal) is compatible with DVI (Digital
Visual Interface), so TVs and displays with a DVI input can be connected
by using an HDMI-to-DVI adapter cable. (Note that DVI connections only
carry video, so you will need to make a separate connection for audio.)
However, reliable operation with such an adapter is not guaranteed. In
addition, video signals from a PC are not supported.
The HDMI audio signal (sampling rate, bit length, etc.) may be restricted
by the connected source component. If the picture is poor or there is no
sound from a component connected via HDMI, check its setup. Refer to
the connected component’s instruction manual for details.
Reference Information
Supported Video Resolution of HDMI OUT
MAIN/SUB Jacks
See below the video signal types and resolutions that the unit can output
when it receives the input signals of the following types and resolutions. The
supported resolutions are shown as "Input: Output".
(North American models)
HDMI: HDMI
4K: 4K (*1/*2)
1080p/24: 4K, 1080p/24 (*1), 2560 × 1080p
2560 × 1080p: 4K (*3), 2560 × 1080p (*1)
1680 × 720p: 4K (*3), 1080p/24, 2560 × 1080p, 1680 × 720p (*1), 1080p
1080p: 4K (*4), 2560 × 1080p, 1080p (*1)
1080i: 4K (*4), 2560 × 1080p, 1680 × 720p, 1080p, 1080i (*1), 720p
720p: 4K (*4), 1080p/24, 2560 × 1080p, 1680 × 720p, 1080p, 1080i, 720p
(*1)
480p: 4K (*4), 2560 × 1080p, 1680 × 720p,1080p, 1080i, 720p, 480p (*1)
480i: 4K (*4), 2560 × 1080p, 1680 × 720p, 1080p,1080i, 720p, 480p, 480i
(*1)
HDMI: Component
Can not be output.
HDMI: Composite
Can not be output.
Component: HDMI
480i: 4K (*4), 2560 × 1080p, 1680 × 720p, 1080p,1080i, 720p, 480p, 480i
(*1)
Component: Component
1080i: 1080i
720p: 720p
480p: 480p
480i: 480i
Composite: HDMI
480i: 4K (*4), 2560 × 1080p, 1680 × 720p, 1080p,1080i, 720p, 480p, 480i
(*1)
Composite: Composite
480i: 480i
*1 Supported resolutions for HDMI OUT SUB.
*2 Supported resolution: [3840 × 2160 24/30/60 Hz] [4096 × 2160
24/30/60 Hz]
*3 Supported resolution: [3840 × 2160 24/30 Hz]
*4 Supported resolution: [3840 × 2160 24/30 Hz] [4096 × 2160
24/30 Hz]
(European models)
HDMI: HDMI
4K: 4K (*1/*2)
1080p/24: 4K, 1080p/24 (*1), 2560 × 1080p
2560 × 1080p: 4K (*3), 2560 × 1080p (*1)
1680 × 720p: 4K (*3), 1080p/24, 2560 × 1080p, 1680 × 720p (*1), 1080p
1080p: 4K (*4), 2560 × 1080p, 1080p (*1)
1080i: 4K (*4), 2560 × 1080p, 1680 × 720p, 1080p, 1080i (*1), 720p
720p: 4K (*4), 1080p/24, 2560 × 1080p, 1680 ×720p, 1080p, 1080i, 720p
(*1)
480p/576p: 4K (*4), 2560 × 1080p, 1680 × 720p,1080p, 1080i, 720p,
480p/576p (*1)
480i/576i: 4K (*4), 2560 × 1080p, 1680 × 720p, 1080p,1080i, 720p,
480p/576p, 480i/576i (*1)
HDMI: Component
Can not be output.
HDMI: Composite
Can not be output.
Component: HDMI
480i/576i: 4K (*4), 2560 × 1080p, 1680 × 720p, 1080p,1080i, 720p,
480p/576p, 480i/576i (*1)
Component: Component
1080p: 1080p
1080i: 1080i
720p: 720p
480p/576p: 480p/576p
480i/576i: 480i/576i
Composite: HDMI
480i: 4K (*4), 2560 × 1080p, 1680 × 720p, 1080p,1080i, 720p, 480p/576p,
480i/576i (*1)
Composite: Composite
480i/576i: 480i/576i
*1 Supported resolutions for HDMI OUT SUB.
*2 Supported resolution: [3840 × 2160 24/25/30/50/60 Hz] [4096 ×
2160 24/25/30/50/60 Hz]
*3 Supported resolution: [3840 × 2160 24/25/30 Hz]
*4 Supported resolution: [3840 × 2160 24/25/30 Hz] [4096 × 2160
24/25/30 Hz]
Reference Information
Home network (LAN)
The connection of several components via cables enabling the mutual
communication is called a network.
At households, many families create (generally, the term "build" is used) a
network to connect PC and gaming machines to the Internet and to
exchange data between PC.
The network established in a relatively narrow area such as one household
is called a LAN (Local Area Network).
In this manual, a term "home network" (network for a family) is used instead
of "LAN," so this LAN becomes more familiar.
By connecting this unit with the network server such as a PC, playing music
files in the network server (in the PC) is possible. Moreover, by connecting to
the Internet, listening to the Internet radio is also possible.
This unit, PC, and Internet are not directly connected.
When connecting with a PC and/or Internet, several components (network
components) are necessary.
Components necessary for establishing a home network (LAN):
Components necessary for the home network (LAN) for using the NET
function of this unit are as follows.
Router
A router is a device that controls information (data) flow between the unit,
PC, and the Internet.
As a network term, the flow of information (data) is called "traffic". The router
has a role to control the information flow as the traffic control, between
connected components.
A router with a built-in 100Base-TX switch is recommended.
In addition, if your router has the DHCP function, facilitating the network
setting becomes possible.
Some routers have a built-in modem, and some Internet Service
Providers (ISP) require you to use specific routers.
Please consult your ISP or PC dealer if you are unsure.
CAT5 Ethernet cable
The Ethernet cable is a cable that actually connects components that
comprise the network. There are straight type and cross type Ethernet
cables.
Use a shielded CAT5 Ethernet cable (straight-type) to connect the unit to
your home network.
Consult your cable store for details of Ethernet cable.
Network server
(When PC etc./network server is used)
Component that stores music files and provides those files at the time of
playback.
Requirements for use with this unit depend on the component that is used
as a network server.
Conditions for pleasant playback of music files on the unit depend on the
using network server (PC performance). See instruction manuals of using
components.
Modem (when Internet radio is used)
Device that connects home network (LAN) and Internet
There are many kinds of modems depending on the forms of Internet
connection.
In addition, when connecting to the Internet, it is required to conclude an
agreement with a company that provides Internet connection service, called
ISP (Internet Service Provider).
Use a modem that is recommended by your ISP company for the Internet
connection.
There are some devices that have both router and modem functions.
Within above network components, prepare a router, Ethernet cable, and
network server when the NET function "network server" is used.
For enjoying the NET function "Internet radio," it is necessary to use the
router, Ethernet cable, and modem (and agreement with ISP).
Reference Information
Server Requirements
Server playback
This unit can play digital music files stored on a PC or media server and
supports the following technologies:
Windows Media® Player 11
Windows Media® Player 12
DLNA-certified media server
The network server must be connected to the same network as this unit.
Up to 20,000 folders can be displayed, and folders may be nested up to 16
levels deep.
Note: Depending on the media server, the unit may not recognize it, or may
not be able to play its music files.
Remote playback
Remote playback is the function that enables this unit to play music files
saved in different components by operating the DLNA-compliant controller
component and PC in the home network.
Windows Media® Player 12
DLNA-certified (within DLNA Interoperability Guidelines version 1.5)
media server or controller component.
* The setting varies depending on the media server or controller
components. Refer to your components’ instruction manual for details.
If the operating system of your personal PC is Windows® 8/Windows® 7,
Windows Media® Player 12 is already installed. For more information, see
the Microsoft web site.
Reference Information
USB Storage Device Requirements
USB mass storage device class (but not always guaranteed).
FAT16 or FAT32 file system format.
If the USB storage device has been partitioned, each section will be
treated as an independent device.
Up to 20,000 folders can be displayed, and folders may be nested up to
16 levels deep.
USB hubs and USB storage devices with hub functions are not
supported. Do not connect these devices to the unit.
Note:
If the media you connect is not supported, the message "No Storage" will
be displayed.
Sound files that are protected by copyright can not be played.
When the USB audio player and this unit are connected, the audio player
screen and the screen of the unit may be different. In addition, control
functions of the audio player (classifying and sorting music files and
adding information, etc.) are not available on this unit.
Do not connect a PC to the USB port of the unit. Inputting sound to the
USB port of the unit from a PC is not possible.
Media inserted to the USB card reader may not be available in this
function.
Some USB storage devices and its contents may require some time to be
read.
Depending on the USB storage device, proper reading of the contents
and proper supply of the power supply may not be possible.
Onkyo accepts no responsibility whatsoever for the loss or damage to
data stored on a USB storage device when that device is used with this
unit. We recommend that you back up your important music files
beforehand.
Performance of the hard disk that receive power from the USB port of the
unit is not guaranteed.
If you connect a USB hard disk drive to the USB port of the unit, we
recommend that you use its AC adapter to power it.
When an audio player that are operated with batteries is used, make sure
that the batteries have enough remaining power.
USB storage devices with security functions can not be played.
Reference Information
Supported Audio Formats
For server playback and playback from a USB storage device, this unit
supports the following music file formats.
Music files of the following formats that can be played depend on the
network server. For example, when using Windows Media® Player 12, not
all music files in the PC can be played. The music files that can be played
are the ones registered to the Windows Media® Player 12 library.
Variable bit-rate (VBR) files are supported. However, playback times may
not be displayed correctly.
This unit supports the gapless playback of the USB storage device in the
following conditions.
When WAV, FLAC and Apple Lossless files are continuously played back
with the same format, sampling frequency, channels and quantization bit
rate.
Remote playback does not support the gapless playback.
For playback via wireless LAN, the sampling rate of 88.2 kHz or higher,
DSD and Dolby TrueHD are not supported.
Note:
With remote playback, this unit does not support the following music file
formats:
– FLAC, Ogg Vorbis, DSD and Dolby TrueHD.
MP3 (.mp3 or .MP3)
Supported formats: MPEG-1/MPEG-2 Audio Layer 3
Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
Supported bitrates: Between 8 kbps and 320 kbps and VBR. Incompatible
files can not be played.
WMA (.wma or .WMA)
WMA files must have the copyright option turned off.
Supported sampling rates: 8 kHz, 11.025 kHz, 22.05 kHz, 32 kHz, 44.1
kHz, 48 kHz
Supported bitrates: Between 5 kbps and 320 kbps and VBR. Incompatible
files can not be played.
WMA Pro/Voice formats are not supported.
WMA Lossless (.wma or .WMA)
Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Quantization bit: 16 bit, 24 bit
WAV (.wav or .WAV)
WAV files contain uncompressed PCM digital audio.
Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176.4
kHz and 192 kHz
Quantization bit: 8 bit, 16 bit, 24 bit
* For playback from a USB storage device, sampling rates of 176.4 kHz
and 192 kHz are not supported.
AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP or .3G2)
Supported formats: MPEG-2/MPEG-4 Audio
Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz
Supported bitrates: Between 8 kbps and 320 kbps. Incompatible files can
not be played.
FLAC (.flac or .FLAC)
FLAC is a file format for lossless audio data compression.
Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176.4
kHz and 192 kHz
Quantization bit: 8 bit, 16 bit, 24 bit
* For playback from a USB storage device, sampling rates of 176.4 kHz
and 192 kHz are not supported.
Ogg Vorbis (.ogg or .OGG)
Supported sampling rates: 8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz, 32
kHz, 44.1 kHz, 48 kHz
Supported bitrates: Between 32 kbps and 500 kbps and VBR.
Incompatible files can not be played.
LPCM (Linear PCM)
Supported sampling rates: 44.1 kHz, 48 kHz
Quantization bit: 16 bit
* Only for playback via DLNA.
Apple Lossless (.m4a/.mp4/.M4A/.MP4)
Supported sampling rates: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz
Quantization bit: 16 bit, 24 bit
DSD (.dsf or .DSF)
Supported sampling rates: 2.8224 MHz, 5.6448 MHz
* For playback from a USB storage device, sampling rates of 5.6448
MHz is not supported.
Dolby TrueHD (.vr/.mlp/.VR/.MLP)
Supported sampling rates: 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,
192 kHz
* For playback from a USB storage device, only sampling rates of
48 kHz is supported.
* Playback via DLNA is not supported.
Reference Information
Radio Wave Caution
The AV receiver uses a 2.4 GHz radio wave
frequency, which is a band used by other wireless
systems as 1 and 2 described below.
1. Devices which use a 2.4 GHz radio wave frequency
Cordless phones
Cordless facsimiles
Microwave ovens
Wireless LAN devices (IEEE802.11b/g/n)
Wireless AV equipment
Wireless controllers for game systems
Microwave oven-based health aids
Video transmitter
Specific type of external monitor and LCD display
2. Less common devices which use a 2.4 GHz radio wave frequency
Anti-theft systems
Amateur radio stations (HAM)
Warehouse logistic management systems
Discrimination systems for train or emergency vehicles
If these devices and the AV receiver are used at the same time, the audio
may be undesirably stopped or disturbed due to a radio wave interference.
Suggestions for improvement
Switch off the devices which emit the radio wave.
Place the interfering devices away from the AV receiver.
The AV receiver uses radio wave, and a third person can receive the
wave on purpose or accidentally. Do not use the communication for
important or fatal matters.
We assume no responsibility whatsoever for any error or damage of
network environment or access device resulting from the use of this
apparatus.
Confirm with the provider or access device maker for more information.
Reference Information
Scope of Operation
Use of the AV receiver is limited to home use. (Transmission distances may
be reduced depending on communication environment.)
In the following locations, poor condition or inability to receive radio waves
may cause the audio to be interrupted or stopped:
In reinforced concrete buildings or steel framed or iron framed buildings.
Near large metallic furniture.
In a crowd of people or near a building or obstacle.
In a location exposed to the magnetic field, static electricity or radio wave
interference from radio communication equipment using the same
frequency band (2.4 GHz) as the AV receiver, such as a 2.4 GHz wireless
LAN device (IEEE802.11b/g/n) or microwave oven.
If you live in a heavily populated residential area (apartment, townhouse,
etc.) and if your neighbor’s microwave oven is placed near your AV
receiver, you may experience radio wave interference. If this occurs,
move your AV receiver to a different place.
When the microwave oven is not in use, there will be no radio wave
interference.
Reference Information
Radio Wave Reflections
The radio waves received by the AV receiver include the radio wave coming
directly from the devices and waves coming from various directions due to
reflections by walls, furniture and building (reflected waves). The reflected
waves (due to obstacles and reflecting objects) further produce a variety of
reflected waves as well as variation in reception condition depending on
locations. If the audio cannot be received properly due to this phenomenon,
try moving the location of the wireless LAN device a little.
Also note that audio may be interrupted due to the reflected waves when a
person crosses or approaches the space between the AV receiver and the
wireless LAN device.
We assume no responsibility whatsoever for any damages resulting from
the use of this apparatus except in the cases deemed acceptable under
the applicable laws and regulations.
Operation in all environment is not guaranteed for wireless LAN. The
communication may not be possible or have desirable communication
speed.
Reference Information
Precautions
Do not use this apparatus near an electronic device handling highaccuracy controls or weak signals. Doing so may cause an accident due
to a malfunction of the device.
Do not use this apparatus in use prohibited location such as an aircraft
equipment or a hospital. Doing so may cause an accident due to a
malfunction of an electronic device or an electro-medical apparatus.
Follow the instructions of the medical facilities.
Electronic device which requires cautions
Hearing aid, pace maker, other medical electronic devices, fire alarm,
automatic door, and other automatic control device.
When using a pace maker or other medical electronic devices, confirm with
the medical electronic device maker or dealer for the effect of the radio
wave.
Reference Information
Remote Control Code List
Television (A to E)
A.R. Systems
Accent
Acoustic Solutions
Action
Addison
AEG
Aiko
Aim
Akai
Akiba
Akito
Akura
Alba
Alien
Allstar
Amstrad
Anam
Andersson
Anitech
Ansonic
AOC
Apex Digital
Ardem
Arena
Ario
Aristona
ART
Art Mito
Asberg
Astra
10037, 10556
10037
11667, 11585, 11037
10650
10653, 11150
11037
10037
10037
10037, 12676, 10208, 10714, 10556, 12414,
13183, 10178
10037
10037
10037, 10714, 11667, 11585, 10171, 11037
11037, 12676, 10037, 10714, 11585
11037
10037
10037, 10171, 11037
10037, 10650
11585, 12676
10037
10037
11365, 12769, 10178, 10625, 11150
12397
10714, 10037
10037
12397
10556, 10037
11037
11585
10037
10037
ATD
Atlantic
Audiosonic
Audioworld
Autovox
Aventura
Axxon
Baird
Barco
Base
Basic Line
Baur
Beaumark
Beijing
Beko
Bell & Howell
Belson
Belstar
Beon
Berthen
Bestar
Bexa
BGH
Black Diamond
Blaupunkt
Blue Sky
BPL
Brandt
Brinkmann
Brionvega
Britania
Bush
Byd:sign
Camper
Carad
Carena
Carrefour
10698
10037
10714, 10037
10698
12676
10171
10714
10208
10556
10698
10037, 11037, 10556
10037, 10195
10178
10208
10714, 10037
10017
10698
11037
10037
10556
10037
12493
12414
11037
10195
10714, 10037, 11037, 10556, 10625
10208, 10037
10625, 11585, 10714
10037
10037
12414
11037, 10037, 10714, 12676, 11667, 10208,
10556, 10698, 11585
12209
10037
11037
10037
10037
Cascade
Casio
Cathay
CCE
Celcus
Celebrity
Centrum
Centurion
Changhong
Chimei
Chun Yun
Chung Hsin
Clarivox
Clatronic
Clayton
Coby
Commercial
Solutions
Condor
Conrowa
Contec
Cosmel
CPTEC
Crown
Crypton
Curtis
Cyberpix
D-Vision
Daewoo
Dansai
Dantax
Datsura
Dawa
Daytron
De Graaf
Decca
Denver
Desmet
Diamant
10037
10037
10037
13782, 10037
12676, 11585
10000
11037
10037
13434, 12769, 10508
12769
10000, 11150
11150
10037
10037, 10714
11037
13478
11447
10037
10698
10037
10037
10625
10037, 10714, 10208, 11037
11667
12397
11667
10037, 10556
10037, 10556, 10178, 11150
10037, 10208
11037, 10714, 12676
10208
10037
10037
10208
10037
10037
10037
10037
Diamond
Digatron
Digihome
Digiline
Digisonic
Digitor
Dixi
Drean
DSE
Dual
Dumont
Durabrand
Dux
DX Antenna
Dynatron
Dynex
E.S.C.
ECE
Elbe
Electroband
Electrograph
Elektra
Elfunk
ELG
Elin
Elite
Emerson
Envision
Epson
Erres
ESA
Euroman
Europa
Europhon
Evesham
Technology
Excello
Exquisit
10698
10037
11667, 12676
10037
11826
10698, 10037
10037
10037
10698
11667, 10037, 11037, 11585, 12676, 10714
10017
10171, 10178, 10714, 11037
10037
13817
10037
12049
10037
10037
10037, 10556
10000
11755
10017
11037
10037
10037
10037
11864, 10171, 11394, 10178, 10037, 10714
11365, 11506
11379
10037
10171
10037
10037
10037
11667
11037
10037
Television (F to J)
F&U
FairTec
Ferguson
Fidelity
Finlandia
Finlux
Firstline
Fisher
Flint
Formenti
Fraba
Freesat
Friac
Frigidaire
Fujitsu
Fujitsu Siemens
Funai
Gaba
Galaxi
Galaxis
Gateway
GE
GEC
Genesis
Genexxa
GFM
Gibralter
Gibson
Gintai
Godrej
GoGen
GoldStar
Goodmans
Gorenje
Gradiente
Graetz
12676
11585
10625, 11037, 10037, 10195, 11585, 12676
10037, 10171
10208
11667, 10714, 12676, 10037, 10556
10714, 10037, 11037, 10208, 10556
10208
10037
10037
10037
11636
10037
11826
10809
10809
13817, 10171, 11394, 11037, 10714
11037
10037
10037
11755
11447, 10178, 10625, 11454
10037
10037
10037
10171, 11864
10017
11826
11150
11585
12676
10178, 10037, 10714, 11150
10037, 11037, 11667, 10714, 11585, 10556,
10625, 12676
11585, 12676
10037
10714
Granada
Grandin
Grundig
H-Buster
Haier
Hallmark
Hankook
Hannspree
Hanseatic
Hantarex
Hantor
Harwood
Hauppauge
HB
HCM
Heran
Herosonic
Highline
Hinari
HiPlus
Hisawa
Hisense
Hitachi
Hitachi Fujian
Hitec
Hoher
Hornyphon
Hua Tun
Hypson
Hyundai
Iberia
ICE
iLo
Imperial
Indiana
Inno Hit
Innova
10208, 10037
10037, 10714, 11037, 10556
10195, 11223, 10556, 10037, 11667, 12676
13620
13620, 10698, 10037, 10508
10178
10178
11826
10037, 10714, 10625, 10556
10037
10037
10037
10037
10714
10037
11826
11826
10037
10037, 10208
11826
10714
10556, 10508, 10208
11643, 12676, 11576, 11585, 11691, 11037,
11667, 10037, 10150, 10178, 10508, 11150,
12170
10150
10698
10714
10037
11150
10037, 10714, 10556, 11037
10698, 12676, 11037
10037
10037
11394
10037
10037
11037, 11585
10037
Insignia
Integra
Inteq
Interbuy
Interfunk
Internal
Intervision
Irradio
IRT
Isis
Isukai
ITS
ITT
ITT Nokia
ITV
JCB
Jinfeng
Jinxing
JMB
Jubilee
JVC
12049, 10171
11807, 13100, 13500
10017
10037
10037
10556
10037
10037
10698
12676
10037
10037
12676, 10208
10208
10037
10000
10208
10037, 10556, 10698
12676, 10556
10556
11774, 10653, 11601, 12271, 11428, 10508,
10650, 12676
Television (K to N)
Kaisui
Karcher
Kathrein
Kendo
Kennex
Kioto
Kiton
KLL
Kneissel
Kolin
Kolster
Konka
Konnig
Korpel
Kosmos
10037
10714
10556
11037, 11585, 12676, 10037
11037
10556
10037
10037
10037, 10556
10150, 10037, 11150, 11755
10037
10037, 10714
10037
10037
10037
Kunlun
Kupperbusch
L&S Electronic
Lavis
Lecson
Lenco
Leyco
LG
LiesenKotter
Lifetec
Linetech
Linsar
Local India Brand
Local Malaysia
Brand
Lodos
Loewe
Logik
Luma
Lumatron
Lumenio
Lux May
Luxor
LXI
Madison
Magnavox
Magnum
Manesth
Manhattan
Marantz
Mark
Mastro
Masuda
Matsui
Matsushita
Maxent
10208
12676
10714
11037
10037
10037, 11037
10037
11840, 11860, 11423, 12731, 12182, 12358,
12362, 10178, 12424, 10037, 10714, 10017,
10556, 10698
10037
10037, 11037, 10714
12676
12676, 11667, 11585
10208
10698
11037
10633
11037, 10698, 11585
11037
10037
10037
10037
11037, 12676, 10208
10178
10037
12372, 11454, 11506, 10171, 11365, 11755,
11867
10714, 10037
10037
10037, 11037
10037, 10556
10037, 10714
10698
10037
10037, 10195, 10208, 11037, 10714, 10556,
11667, 12676
10650
11755
Maxess
Meck
Mediator
Medion
Moree
Morgan's
Moserbaer
MTlogic
Mudan
Multitec
Multitech
Myryad
NAD
Naiko
Nakimura
National
NEC
Neckermann
12493
10698
10037, 10556
10714, 10037, 11037, 12676, 11667, 10556,
10698, 11585
10178
11037
10037, 10195, 10714
10178, 10150, 11037
10037
10037
10625
11037, 10195
10150, 10178
10037, 10714, 11037
10017
11585, 11667
10037
10195
11667
10037
10150, 11250, 12313, 10178, 10037, 10556,
11150, 11037, 11171
10037
10037
11585
10714
10208
11037, 10037
10037
10556
10037, 10178
10037
10037
10208, 10508
12461, 10178, 10508, 10653, 11150
10037, 10556
NEI
Neoka
10037, 11037
11826
Megatron
MEI
Melectronic
Memorex
Mercury
Mermaid
Metronic
Metz
MGA
Micromaxx
Midland
Mikomi
Minato
Minerva
Ministry Of Sound
Minoka
Mitsubishi
Netsat
NetTV
Neufunk
Nevir
New Sonic
New Tech
Newave
Nikkai
Nikkei
Nikko
Nokia
Norcent
Nordmende
Normerel
Novatronic
Novita
NPG
10037
11755
10556, 10714, 10037
12676
11826
10037, 10556
10178, 11150
10037
10714
10178
10208
11365
10195, 11585, 10037, 10714, 11667
10037
10037
11585
13434
Television (O to S)
Oceanic
OK Line
OK.
Okano
OKI
Omni
Onei
Onida
Onimax
Onix
Onkyo
Onn
Opera
Optimus
Orava
Orbit
Orion
Orline
Ormond
Osaki
10208
11037
13434, 12676
10037
11667, 12676, 13434, 11585
10698
11667
10653, 12414
10714
10698
11807, 13100, 13500
11667
10037, 10714
10650
11037
10037
10037, 10556, 10714, 11037, 12676
10037
11037
10037, 10556
Osio
Osume
Otto Versand
Pacific
Palladium
Palsonic
Panama
Panasonic
Panavideo
Panavision
Panda
Penney
Perdio
Perfekt
Philco
Philips
Phocus
Phoenix
Phonola
Pioneer
PJ
Plantron
Playsonic
Polaroid
Powerpoint
Prima
Prinston
Pro Vision
Profitronic
Proline
Proscan
Prosonic
Protech
Proton
Pulsar
Pye
10037
10037
10037, 10556, 10195
10714, 11037, 10556
10037, 10714, 10556
12461, 10698, 10037
10037
11636, 11291, 11480, 11650, 10650, 13825,
12170, 10037, 10208, 10508
13825
10037
10208, 10508, 10698
10178
10037
10037
13426, 12414, 10037, 10178
10037, 12800, 10556, 11887, 11867, 11506,
12372, 12680, 11454, 10171, 11365, 10017,
10000, 10178, 11394
10714
10037
10037, 10556
11457, 10037, 10698, 11636, 12171
11506
10037
10714, 10037
12676, 11826
10037, 10698
12461
11037
10037, 10556, 10714
10037
10625, 10037, 11037, 12676
11447
10714, 12676, 10037, 11585, 11667
10037, 11037
10178
10017
10037, 10556
Qingdao
Quadro
Quasar
Quelle
R-Line
Radiola
Radiomarelli
RadioShack
Radiotone
RCA
Realistic
Recor
Rectiligne
Red Star
Reflex
Relisys
Relon
Remotec
Reoc
Revox
RFT
Roadstar
Rowa
Runco
Saba
Sagem
Saivod
Salora
Sampo
Samsung
Sansui
Sanyo
SBR
Schaub Lorenz
Schneider
Schontech
10208
11667
11291, 10650
10037, 11037, 10195
10037
10037, 10556
10037
10037, 10178
10037, 11037
11447, 12746, 10625, 12434, 12932, 12187,
10000, 10178, 10618, 11454, 13426
10178
10037
10037
10037
10037, 11037
11585
11826
10037, 10171
10714
10037
10037
11037, 10037, 10714
10698, 10037
10017
10625, 10714, 12676
10618
11037, 10037
10208
11755, 10171, 10178, 10650
12051, 11632, 10618, 10037, 10556, 10178,
10208, 11150
10037, 10714
10208, 11142, 11585, 12676, 12461, 11974,
12769, 10508, 11037, 11150, 11365, 11667
10037, 10556
10714, 12676, 11667
10037, 10556, 10714, 11037, 11585, 12676
11037
Scotch
Scott
Sears
Seelver
SEG
SEI
Sei-Sinudyne
Semp Toshiba
Sencor
Senzu
Serie Dorada
Shanghai
Sharp
Sheng Chia
Shintoshi
Shivaki
Siam
Siemens
Siera
Silva
Silva Schneider
SilverCrest
Sinudyne
SKY
Skyworth
Solavox
Soniko
Soniq
Sonitron
Sonneclair
Sonoko
Sonolor
Sontec
Sony
Soundesign
Soundwave
Sowa
10178
10178
10171, 10178
11037
11037, 10037, 13434
10037
10037
13793
10714
12493
10178
10208
11659, 12360, 10818, 11393, 12676, 10650,
11165, 11423
11150
10037
10178, 10037
10037
10195, 10037
10556, 10037
10037
10037
12676, 11037
10037
10037
12769, 10037, 10698
10037
10037
12493
10208
10037
10037
10208
10037
12778, 11825, 10810, 10000, 11651, 11505,
11167
10178
10037, 11037
10178, 11150
Soyea
Soyo
Squareview
SR Standard
Starlite
STI
Strato
Sunny
Sunstar
Sunstech
Sunwood
Supersonic
SuperTech
Supra
Supreme
Svasa
Sylvania
Symphonic
Synco
Sysline
10698
11826
10171
10037, 11037
10037
13793
10037
10037
10037
12676
10037
10208
10037, 10556
10178
10000
10208
10171, 11864, 11394
10171, 11394
11755, 10000, 10178, 11826
10037
Television (T to Z)
Tacico
Tai Yi
Talent
Tashiko
Tatung
TCL
TCM
Teac
Tec
Tech Line
Technica
Technics
Technika
TechniSat
Technisson
Techno
10178, 11150
11150
10178
10650, 11150
10037, 11150
12434, 13183, 13426, 12414, 10698
10714
10037, 11037, 10698, 10714, 11755, 10171,
10178
10037
10037, 11585
11037
10556, 10650
11667, 12676
10556
10714
11585
Technosonic
Techwood
Tecnimagen
Teco
Tedelex
Teknika
TELE System
Telecor
Telefunken
TRANS-continents
Transonic
Triad
Triumph
TVTEXT 95
Uher
Ultravox
10556, 10625
11667, 11037, 12676
10556
10178, 10653
10208
10150
11585
10037
10625, 12676, 12414, 10698, 11585, 10037,
10714, 11667
10037
10037
10037
10037
10037, 10556
10037, 11037
10037
10037
10037, 11037
11667
11037, 10037, 10556, 10714
10714, 11037, 10037, 10556, 11585, 11667
10625, 11447, 10037
10037
10178
10017
10037, 11037
11037
11037
11508, 11524, 11656, 12676, 10508, 13570,
10650, 11037, 10195, 10618, 11150, 11169
10037, 10556, 11037
10037, 10698
10556
10037, 10556
10556
10037
10037
Unic Line
10037
Telefusion
Telegazi
Telemeister
Telesonic
Telestar
Teletech
Teleview
Tennessee
Tensai
Terris
Tesla
Tevion
Thomson
Thorn
TMK
TNCi
Tokai
Tokaido
Topline
Toshiba
Uniden
United
Universal
Universum
Univox
V7 Videoseven
Vestel
Vexa
Victor
Videocon
VideoSystem
Vidtech
Viewsonic
Vision
VIZIO
Vortec
Voxson
VU
Walker
Waltham
Wards
Watson
Wega
Welltech
Weltstar
Westinghouse
Westwood
Wharfedale
White
Westinghouse
Wilson
Windsor
Windy Sam
Wintel
Wyse
Xiahua
Xiron
XLogic
Xoceco
12122, 12676, 11667
10714, 11037, 10037, 10556
10037, 10714
10037, 11037, 10195, 10618
10037
11755
11037, 10037, 11585, 11667
10037
11428, 10650, 10653
10508, 10037
10037
10178
11755, 12049, 11365
11826, 10037
11758, 13758, 12209
10037
10037, 10178, 11667
11365
12676, 11667, 11585
10037, 11037
10017, 10000, 10178
11037, 10037, 10714
10037
10714
11037
11712, 11826, 11755, 12397
11585
11667, 10037, 10556
10037
10556
11037
10556
10714
11365
10698
11037
10698
10037, 12461
Xrypton
Yamaha
Yamishi
Yokan
Yoko
YU-MA-TU
Zenith
Zepto
Zonda
10037
11576, 10650
10037
10037
10037
10037
10017, 10178, 11423, 12731, 11365, 12358,
12362
11585
10698
TV DVD Combination
Akai
Alba
Black Diamond
Blue Sky
Bush
Centrum
Crown
Dual
Dynex
Elfunk
Emerson
Ferguson
Funai
Goodmans
Grandin
Grundig
Hitachi
Insignia
JVC
LG
Linsar
Logik
Luxor
Magnavox
Matsui
Medion
Mitsubishi
12676, 32966
12676, 32966
11037, 30713
11037, 30713
12676, 10698, 11037, 30713, 32966
11037, 30713
11037, 30713
11037, 30713
12049
11037, 30713
11864, 11394, 30675
11037, 30713
11394, 30675
11037, 12676, 30713, 32966
30713
30539
12676, 11037, 30713, 32966
12049
12271, 11774
11423
12676, 32966
11037, 30713
11037, 30713
12372
11037, 12676, 30713
12676, 32966
34004
OK.
OKI
Orava
Panasonic
Philips
Polaroid
Powerpoint
Prosonic
RCA
Samsung
Sanyo
SEG
Sharp
Soniq
Sony
Sylvania
Teac
Technica
Telefunken
Teletech
Thomson
Toshiba
United
Universum
Vestel
Viewsonic
Weltstar
Westinghouse
Xiron
13434
12676, 32966
11037, 30713
12170
10556, 11454, 11394, 12372, 30539
12676, 32966
10698
12676, 32966
12187, 12746, 12932, 11447
12051
12676
11037, 30713
10818, 12360, 12676, 32966
12493
12778
11864, 11394, 10171, 30675, 30630
10698
11037, 30713
10698
11037, 30713
10625, 30551
11524, 12676, 32966
11037, 30713
30713
11037
12049
11037, 30713
11712
11037, 30713
DVD
3D LAB
Accurian
Acoustic Solutions
AEG
Aiwa
Akai
Akura
Alba
30539
30675
30730, 30713
30675, 30770, 31233
30533
32966, 31233, 30675, 30770
31233
32966, 30713, 30730, 30539
Amitech
Amstrad
AMW
Ansonic
Aristona
ASDA
Audix
Autovox
Awa
Axion
Basic Line
Bel Canto Design
Belson
Best Buy
Black Diamond
Blu:sens
Blue Parade
Blue Sky
Brainwave
Brandt
Bush
Byd:sign
CCE
Celcus
Centrum
Changhong
Cinea
Cineral
Cinetec
Classic
Clatronic
Clayton
Coby
Codex
Continental Edison
Craig
Crown
30770
30713, 30770, 32139
30872
30831
30539, 30646
32213
30713
30713
30730, 30872
30730
30713
31571
32139
32139
30713
31233
30571
30713
30770
30551, 30503
30713, 30730, 30831, 32966
30872
30730
32966
30713, 30675
30627
30831
30730
30713, 30872
30730
30675, 31233
30713
30730
31233
30831, 30872
30831
30713, 30770
Cybercom
30831
Daenyx
Daewoo
Dansai
Dantax
Datsun
Daytek
Dayton Audio
DCE
Decca
Denon
Dewo
Digihome
DigiLogic
DiK
Disney
DK Digital
Dragon
DSE
Dual
Durabrand
Dynex
E:max
ECC
Elfunk
Elin
Elite
Elta
Eltax
Emerson
EuroLine
Ferguson
Finlux
Firstline
Funai
G-Hanz
G-HanzS
GE
GFM
30872
30770, 30872
30770
30713, 30539, 32966
31233
30872
30872
30831
30770
31634, 32258, 32748, 30490, 33851
31634
30713, 32966
30713
30831
30675, 30831
30831
30831
30675
30831, 30713, 30730, 32966
30675, 30713, 30831
32596
30770, 31233
30730
30713
30770
32854
30770, 31233
31233
30675, 32213
30675, 31233
30713, 32966
32966, 30770, 30741
30713
30675
32213
32213
30522
30675
Go Video
31044, 30741
GoldStar
Goodmans
GPX
Gran Prix
Grandin
Grundig
Grunkel
GVG
H&B
Hanseatic
Harman/Kardon
HE
Hello Kitty
Henss
Hitachi
Hoher
Home Electronics
Humax
HYD
Hyundai
Inno Hit
Insignia
Integra
Irradio
ITT
JDB
JMB
JVC
Kansas
Technologies
Kendo
Kennex
Kenwood
Kiiro
Kupperbusch
Leiker
Lenco
Lexicon
30741
30713, 30730, 32966
30741
30831
30713, 31233
30539, 30551, 30713, 32966
30770, 30831
30770
30713, 31233
30741
30582
30730
30831
30713
32966, 30573, 30713, 31664
30713, 30831
30730, 30770
30646
31233
32966
30713
32596, 30675, 30741
32147, 30627, 31769, 30503, 31612, 30571,
31634
31233, 30646
31233
30730
32966
30623, 31602, 30503, 30539, 32966
31233
30713, 30831
30713, 30770
30490
30770
32966
30872
30713, 30770
32545
LG
Lifetec
Linetech
Linsar
Lodos
Loewe
Logik
Lumatron
Lunatron
Luxman
Luxor
Magnavox
Manhattan
Marantz
Mark
Marquant
Matsui
Maxim
MBO
MDS
Mecotek
Medion
Memorex
Metz
Micromedia
Micromega
Microsoft
Microstar
Minax
Minoka
Mitsubishi
Mizuda
Mustek
Mystral
NAD
Naiko
30741, 31602, 31233
30831
32966
32966
30713
30741, 30539
30713
30713, 30741
30741
30573
30713, 32966
30675, 30503, 30646, 30539, 31354, 30713
30713
30539, 32414, 33444
30713
30770
30713, 32966
30713, 30872
30730
30713
30770
30831, 32966, 30741, 30630
30831, 32213
30713, 30571
30503, 30539
30539
31708, 32083, 30522
30831
30713
30770
34004, 30713
30770
30730
30831
30741
30770
NEC
Nevir
Nisato
30741, 31602
30831, 30770
31233
Noblex
Norcent
Nordmende
OK.
OKI
Onkyo
Pioneer
Polaroid
Polk Audio
Portland
Powerpoint
Presidian
Prinz
Prism
Pro Vision
Proline
Proscan
Proson
Prosonic
Pye
Radionette
31233
30872
30831
32966
32966
30627, 32147, 31612, 31769, 30503, 30571,
31634
32545, 30575
30713
30872
30713, 31233
30713
30831, 30713
30831
30713
30490, 31579, 31641, 32710, 33641, 33862,
32523
30675
32056, 30539, 31354, 32789, 32434, 30646,
31340, 30503, 30675, 32084
31571, 30631, 30571, 32442, 32854, 30142
32966
30539
30770
30872
30675
30831
30831
30730
32966
30522
30713
32966
30539, 30646
30741
Radiotone
RCA
REC
Red
30713
30522, 32213, 30571, 31769
30490
32213
Oppo
Orava
Orbit
Orion
Ormond
Pacific
Packard Bell
Palladium
Panasonic
Philco
Philips
Red Star
Richmond
Roadstar
Ronin
Rotel
Rowa
Saba
Saivod
Salora
Samsung
Sanyo
ScanMagic
Schaub Lorenz
Schneider
Schontech
Scott
SEG
Semp
Semp Toshiba
Sharp
Sherwood
Shinsonic
Sigmatek
Silva Schneider
Skantic
Skymaster
SM Electronic
Smart
Sonashi
Soniq
Sony
Sound Color
Soundwave
Spectra
SR Standard
Strong
Sunkai
30770
31233
30713, 30730
30872
30623
30872
30551
30831
30741
30199, 30573, 33195, 31635, 32369, 32489,
32329, 30490, 31044
32966, 30713, 31233
30730
30770
30539, 30831, 30646, 30713
30713
31233
30713, 30872
30503
30503
30630, 32250, 30713, 32966, 30675
30741, 30770
30533
32139
30831, 30741
30713, 30539
30730
30730
30713
30831
30831
31633, 31516, 30533, 31033, 31070, 30864,
32861, 31536, 32180
31233
30713
30872
30831
30713
30770
Sunstech
Supratech
Sylvania
Symphonic
Sytech
Tandberg
Targa
Tascam
Tatung
TBoston
Tchibo
TCM
Teac
Technica
Technics
Technika
Technosonic
Techwood
Telefunken
Teletech
Tensai
Theta Digital
Thomson
Tokai
Toshiba
TRANS-continents
Transonic
Trevi
TVE
United
Universum
Urban Concepts
Venturer
Vestel
VIZIO
Voxson
Waitec
Walker
30831, 32139, 32966
32139
30675, 30630
30675
30831
30713
30741
31818
30770
32139
30741
30741
30571, 30675, 30741, 31818, 32139, 34004
30713
30490
30770, 30831
30730
30713, 32966
30551, 32966
30713
30770
30571
30551, 30522, 30831
31233
30503, 32705, 32277, 31769, 33157, 32966,
32551
30831, 30872, 31233
30730
30831
30713
30713, 30675, 30730, 31233
30713, 30741
30503
31769
30713
32563
30831, 30730
30730, 31233
32966
Waltham
Welkin
Wellington
Weltstar
Wharfedale
Wilson
Windsor
Windy Sam
Woxter
X-View
Xbox
Xiron
XMS
Yamada
Yamaha
Yamakawa
Yukai
Zenith
30713
30831
30713
30713
30713
31233, 30831
30713
30573
32139
31233
31708, 32083, 30522
30713
30770
30872, 32139
30539, 30817, 30490, 32298, 31354, 30646
30872
30730
30741, 30503
Blu-ray Disc
Denon
Elite
Funai
Insignia
Integra
Lexicon
LG
Magnavox
Marantz
Mitsubishi
Onkyo
Oppo
Panasonic
Philips
Pioneer
Samsung
Sharp
32258, 32748, 33851
32854
30675
32596, 30675
32147, 32900, 32910, 33100, 33101, 33500,
33501
32545
31602, 30741
30675
32414, 33444
34004
32147, 32900, 33101, 33501, 32910, 33100,
33500
32545
31641, 33641, 33862, 32523, 32710
32789, 32434, 32084
32442, 32854, 30142
30199, 33195
32250
Sony
Sylvania
Tascam
Toshiba
VIZIO
Yamaha
31516, 32180
30675
31818, 34004
32705, 33157, 32551
32563
32298
DVD-R
Accurian
Aristona
Denon
Emerson
Funai
Go Video
GPX
Hitachi
Humax
Irradio
LG
Loewe
Magnavox
Medion
Panasonic
Philips
Pioneer
Pye
RCA
Samsung
Schneider
Sharp
Sony
Sylvania
Targa
Thomson
Toshiba
Yamaha
Zenith
30675
30646
30490
30675
30675
30741
30741
31664
30646
30646
30741
30741
30675, 30646
30741
30490, 31579, 32710, 32523
30646, 31340
30631
30646
30522
31635, 30490, 32489
30646
30630, 30675
32861, 31070, 31516, 31033, 31536, 32180,
31633
30675
30741
30551
32277, 32551
30646
30741
VCR
DirecTV
Humax
Panasonic
Philips
RCN
ReplayTV
Sonic Blue
Sony
TiVo
20739
20739
20616
20739
20739
20616
20616
20636
20739, 20636
Cable Set Top Box (A to E)
3 Rivers Telephone
Cooperative
Accelplus
Access Cable
Television
Access
Communications
Ace
Communications
ACTV Cablevision
Adams Cable TV
ADB
Advanced
Broadband
Advanced
Telemedia
Airwave Networks
Akado
Alabama Broadband
Alcom
Algona Municipal
Utilities
All West
Communications
Alleghany
Cablevision
Allegiance
Communications
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
02586
01376, 01877, 01982
01376
02586, 01920, 01481, 01998, 02437, 03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01982
02043
01376
02437
01376, 01877, 01982
01376
01376, 01877, 01982
01376
Alliance
Communications
Allied Telesis
Almega Cable
Alpine Cable
Alta Utilities
Alternative Cable
Altibox
Altitude
Communications
Americable
International
American
Broadband
American
Entertainment
Network
American
Telecasting
Amherst Telephone
Amino
Anne Arundel
Broadband
Antietam Cable
Arc One
Arctic Cooperatives
Argent
Communications
Arialink Broadband
Arkwest
Arledge Electronics
Armstrong
Arris
Arvig
Communication
Systems
Ashland Home Net
Askivision Systems
Astound Broadband
AT&T
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877
01376, 01877, 01982
02437
01376
01877
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01615, 01481, 01898, 01998, 03028
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376
01376, 01877
02187
01376, 01982, 01998, 02345
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
00858
ATC
Communications
Atlantic Broadband
ATMC
Atwood Cable
Aurora Cable TV
Ayrshire
Communications
B & C Cablevision
B & L Technologies
Bailey Cable TV
Baja Broadband
Baldwin County
Internet
Baldwin Telecom
Ballard Rural
Telephone
Cooperative
Barbourville Utility
Commission
Bardstown Cable
Bascom
Communications
Base Cablevision
Bay Cablevision
Bay City Cablevision
Bay Country
Communications
Bay Creek
Communications
Bayland
Communications
Bayou Cable
Beamspeed
Beaver Creek
Telephone
Beaver Valley Cable
Beck's Cable
Systems
Bee Line Cable
Beeline
01376
01877, 01376
01376, 01982, 01998, 03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01877
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
02586
01376, 01877, 01982
01376, 01877, 01982
01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
03028
BELD Broadband
Belgacom TV
Belhaven Cable TV
Bell
Bell Aliant
Bell Fibe TV
Bellaire Cable
Bellevue Cable
Bend Broadband
Bentleyville Cable
Benton Cooperative
Telephone
Beresford
Cablevision
Berkshire Cable
Corp
Beulah Cable TV
Bevcomm
Beyond
Communications
Big Sandy
Broadband
Biltmore
Communications
Blakely Cable
Television
Bledsoe Telephone
Cooperative
Bloomingdale
Communications
Blue Mountain TV
Cable
Blue Ridge
Communications
Blue Sky Cable
Blue Valley
Telecommunications
Bobcaygeon Cable
Booher Brothers
Cable
Bouygues Telecom
01376, 01877, 01982
02132
01376, 01877, 01982
01998
01998
01998
01376, 01877, 01982
01376, 01877, 01982
01376, 02187
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01615, 01898
01376, 01877, 01982
01376, 01877, 01982
01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01481, 01998, 03028
01376, 01877, 01982
01877
01376, 01877, 01982
01898
01376, 01877, 01982
01376, 01877, 01982
03007
Bowen Cablevision
Boycom Cablevision
Branch Cable
Brandenburg
Telecom
Brandywine
Cablevision
Bresnan
Briand et Moreau
Cable
Bright Green
Communications
Bright House
Bristol Tennessee
Essential Services
Bristol Virginia
Utilities
British American
Broadstar
Communications
Broadstripe
Brockway Television
Broken Bow Cable
TV
Brooks Bay Cable
Brownwood TV
Cable Service
Bryan Municipal
Utilities
BT
BTC Broadband
Buckeye Cable
System
Bulldog Cable
Bulloch Telephone
Cooperative
Burlington Telecom
Butler Bremer
Mutual Telephone
Byron Cable TV
C & W Cable
01376, 01877, 01982
01376
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
01376, 01877
01376, 01877, 01982
01376, 01877, 01982
01877, 01376
01877, 01998
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02294
02586
01877, 01376, 02187
01376, 01877, 01982
01376, 01877, 01982
01481, 01615
01898
01376, 01877, 01982
01376, 01877, 01982
C.L. Davis Cable
Services
01376, 01877, 01982
Cable &
Communications
Cable America
Cable Axion Digitel
Cable
Communications of
Willsboro
Cable Cooperative
Cable Development
Corporation
Cable Management
Assocication
Cable Montana
Cable Nebraska
Cable Of The
Carolinas
Cable One
Cable Plus
Cable Suite
Cable Tech Cable
TV
Cable TV of
Camrose
Cable TV of East
Alabama
Cable TV of Slave
Lake
Cable TV of St. Paul
Cable Vision
Services
Cablecom
Cablecom Mexico
Cablemas
Cablenet
CableSouth Media
Cableview
Communications
Cablevision
Cablevision du Nord
01376
01376, 01877
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
01376, 01877, 01982
01376
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877
01582
01376
01376, 01877
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877, 01376
01376
Cablevision of
Marion County
Cablevision T.R.P.
Cabovis
Caiway
CalNeva Broadband
CalTel Connections
Cameron
Communications
CAMS Cable
Canby Telcom
Cannon Valley
Cablevision
Caprock TV
Carnegie Cable
Carolina Mountain
Cable
Carr
Communications
Carrell
Communications
CAS Cable
Cascade
Communications
Casey Cable
Caspian Community
TV
Cass Cable
Castle Cable
Service
Catalina Cable
Catawba Services
CBN
CBPU Cable
CCAP
CDE Lightband
Cedar Falls Utilities
Celect
Communications
Cencom
01376
01376, 01877, 01982
02436
02015, 0660
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01481
01481, 01998, 03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877
00858, 01615, 02586
01376
01376, 01877, 01982
01376, 01877, 01982
CentraCom
Interactive
01376, 01877, 01982
Central Texas
Communications
Central Valley Cable
Centre TV Cable
Centrovision
Century
Communications
Century Telephone
CenturyLink
CenturyTel
TeleVideo
Chambers Cable
Champion
Broadband
Chaparral
Cablevision
Chariton Valley
Communications
Charter
Chatmoss
Cablevision
Chequamegon
Telephone
Cooperative
Chesnee
Communications
Chester Telephone
Chinook
Progressive Club TV
Chippewa Valley
Cable
Choice Cable TV
Choice
Communications
Choice Television
ChoiceCable
Christy Cablevision
CimTel
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01998
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 02187
01376, 01877, 01982
01898, 01615
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376
Cincinnati Bell
Circle Bar Cable
Television
Cisco
01877, 01376
01376, 01877, 01982
Citizens Cable
Citizens Cable TV
Citizens Cablevision
Citizens Mutual
Telephone
Citizens Telecom
Citizens Telephone
City Cablevision
City of Barnesville
Cable
City of Baxter
Springs Cable
City of Hawarden
Cable
City of Norway
Cable
City of Quitman
Cable
City Of Salisaw
City of Sumas TV
Cable System
City West
Citycable
Clarence Telephone
Claro
Clear Creek
Communications
Clearview Cable
Clearview Partners
Clearview TV Cable
Clearvision Cable
TV
Click Network
ClickOne
Clinton Cable
01376
01376
01481
01376, 01877, 01982
01877, 01982, 00858, 02589, 03028, 02132,
02345, 01582, 01883, 02378, 02401, 03265
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376
03477
01376, 01877, 01982
01376
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
CLT
Communications
ClubInternet
CMA
Communications
01376, 01877, 01982
CNS Television
Coast Cable
Communications
Coast Cablevision
Coast
Communications
Coastal Link
Coaxial Cable TV
Cobridge
Cobridge
Communications
Cogeco
Colane Cable TV
Colfax Highline
Cable
Collinsville Cable
Colonial Cablevision
ColtonTel
Columbia Power
and Water
Columbus
Telephone
Com Hem
Com-Link
Comcast
Communication
Services
Communicomm
Community Antenna
Service
Community Antenna
System
Community Cable &
Broadband
Community Cable
Service
01376, 01877, 01982
01376
02132
01376
01376, 01877, 01982
01376
01376
01376, 01877, 01982
01376
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02378
01376, 01877
01376
00660, 02015
01376, 01877, 01982
01376, 01982, 01877, 02187
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
Community
Communications
Community Telecom
Community
Television
01376, 01877, 01982
Compas Cable
Complete
Communication
Services
Comserv Ltd
ComSouth
ComSpan
Communications
Comstar Cable TV
Consolidated Cable
Consolidated
Communications
Conuma Cable
Systems
Conway Corporation
Cable TV
Conxxus
Coon Creek
Telephone
Coon Rapids
Municipal Utilities
Coop CSCF
Cooperative
Television Godahl
CoopTel
Coosa Cable
Copper Mountain
Metropolitan
Country Cable
Country Cable TV
Country Cablevision
Country Cablevision
Ltd.
Cowley Telecable
Cox
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
01376, 01877, 01982
01376, 01877, 01982
01481, 01898
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376
01376, 01877, 01982
00858, 01615, 01898
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376
01376, 01877, 01982
01877, 01376
Craig Cable TV
Craw-Kan
Telephone
Cooperative
Crestview Cable
Cross Country TV
Crosslake
Communications
Crow Cable TV
CRRS-TV
CRST Telephone
Authority
Crystal Cable TV
CSI Cable
CT & R Cable
CTC
Cunningham
Telephone & Cable
Curtis Cable TV
CUTV
CWA Cable
D & D Cable
Systems
D&P
Communications
Daeryung
Dairyland Cable
Systems
Dakota Central
Telecommunications
Dalton Cable
Television
Darty Box
Davis
Communications
Dawson City
Television
DCA Cablevision
DDD Cablevision
Dean Hill Cable
Dean's Cablevision
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01481, 01998, 03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01877
01376, 01877, 01982
02345
01877, 01982
02436
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Decca Cable
Deffner Cable TV
Delhi Telephone
Delta
Delta Cable
Demopolis CATV
Denali TV
Dery Telecom
Deutsche Telekom
Dickey Rural
Networks
Digeo
Diode
Communications
Diverse
Communications
Dixie Cable TV
Dixon Telephone
DMS Cable
Downsville
Community Antenna
Doylestown Cable
TV
Drummond Cable
TV
DTC
Du
Dumont Telephone
Duncan Cable TV
Eagle Broadband
Eagle Cablevision
Eagle
Communications
Eagle Valley
Telephone
EagleVision
Wireless TV
Services
East Arkansas
Video
East Cleveland
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02015, 00660
01376
01376, 01877, 01982
01376, 01877, 01982
01376
02132
01376, 01877, 01982
02187
01376, 01877, 01982
01898, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02401
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
01376, 02187
01481, 01998, 03028
01376, 01877, 01982
01376
01376, 01877, 01982
Cable
East Texas Cable
Eastern Cable
EastLink
Easton Cable
EasyTEL
Eatel
Echostar
Electron Enterprises
Elk River Cable TV
Elkhart TV Cable
Emery Telcom
Video
Emily Coop
Telephone
Enhanced
Telecommunications
EnTouch
EPB of Chattanooga
Escape Broadband
Eston CATV
Cooperative
ETAN Industries
Etex
Execulink
Eyecom
01376, 01877, 01982
01376, 01877, 01982
01376
01877
01481, 01998, 03028
01877
03452
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01481, 01615
01376
01376
00858
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02586
01376
01376, 01877, 01982
Cable Set Top Box (F to J)
F & B Telephone
FairPoint
Communications
Falls Earth Station
FamilyView
Cablevision
Fannettsburg Cable
TV
Farmer & Merchant
Mutual
Farmer's Telephone
Cooperative
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01998, 03028
Farmers
Independent
Telephone
Farmers Mutual
Telephone
Fayetteville Electric
System
Federated
Telephone
Fenton Cablevision
FiberCast Cable
Communications
FiberNet Monticello
Fibrant
Fidelity
Communications
First Cable Of
Missouri
FirstMile
Flint Cable TV
Florida Cable
Foothills Rural
Telephone
Cooperative
Forsyth CableNet
Fort Jennings
Communications
Fort Towson Cable
Foster
Communications
Frank Howard TV
Cable
Frankfort Plant
Board Cable
Freebox
FTC
Full Channel TV
Full Choice
Communications
Fusion Broadband
Futuristic
01376, 01877, 01982
01376, 01877, 01982
01877
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01877
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01976
01877, 01982, 01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Cablevision
Galaxy American
Communication
Galaxy Cable
Gardonville
Cooperative
Telephone
Gatehouse
Networks
Gauthier
Cablevision &
Electric
GCI
General
Communications
Genext
Geraldine Cable TV
Get Real Cable
GEUS
Giant
Communications
Giles-Craig
Communications
Gilmer Cable
Television
Glasgow Electric
Plant Board
Glass Antenna
Systems
Glenwood
Telecommunications
Glide Cablevision
Globalcom
Golden Belt
Telephone
Golden
Communications
Golden Rain
Foundation
Golden Valley Cable
Golden West
01376, 01877, 01982
01376, 01877, 01982
01998
01376, 01877, 01982
01376, 01877, 01982
01877
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Telecommunications
Goldfield
Communications
Gorham
Communications
Gowrie Cablevision
Grafton Cable
Communications
Grand River Cable
Grande
Communications
Great Plains
Communications
Green Hills
Communications
Greene County
Cable TV
Greenlight
Community
Broadband
Gridley Cable
Griswold
Cooperative
Telephone
Grove Cable
Grundy Center
Utilities
GTI
Guadalupe Valley
Haefele TV
Haines Cable TV
Hall Beach
Cooperative
Hamilton County
Cable TV
Hancel
Hargray
Harlan Community
TV
Harlan Municipal
Utilities
01376, 01877, 01982
01481
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877, 01376
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
01376, 01877
01481, 01998, 03028
01877
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877, 01982, 01376
01376, 01877, 01982
01376, 01877, 01982
01376
01376
Harmony Cable TV
Harris Broadband
Harrisonville
Telephone
01376, 01877, 01982
01376
02586
Harron Metrocast
Hart Cable
Hart Electric
Hartelco
Hastings Cable
Vision
Hathw@y
Hawaiian Telcom
HBC
HBL
Communications
HCS
Healthcare Cable
Systems
Heart of Iowa
Communications
Heartland Cable
Heartland Wireless
Communications
Heck's TV & Cable
Henderson
Telephone
Hermosa
Cablevision
Herr Cable
HFU Television
Hiawatha
Broadband
HickoryTech
High Plains
Cablevision
Highland
Hill Top
Communications
Hinton CATV
HLM Cable Corp
01376, 01877
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02043
03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01898
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
HomeTel
Hometown Cable
Hometown Utilicom
Hood Canal
Cablevision
01376
01376, 01877, 01982
01376, 01877, 01982
01376
Hoonah Community
Television
Hooper Telephone
Horizon Cable TV
Horizon Telecom
Horry Telephone
Cooperative
Hospers Telephone
Hotwire
Houston Cable
Hrvatski Telekom
HTC
Communications
HTC Services
Humax
HunTel Systems
Huxley
Communications
Hydaburg Cable TV
HYDE County
Cablevision
i-CAN
I-Speed
ICE Cable Holdings
ICS
Communications
Illini Cablevision Of
Illinois
ImOn
Communications
Indco Cable TV
Independence
Telecom Utility
Independent Cable
Systems of Idaho
01376, 01877, 01982
01376, 01877, 01982
01376, 02586
02586
01376, 01877, 01982
01376, 01877, 01982
02586
01376, 01877, 01982
02132
01481, 01998, 03028
01376, 01877, 01982
00660, 02620, 02043, 02165
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02437
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01877
01376, 01877, 01982
01376, 01982
01376, 01877, 01982
Indevideo
Index Cable TV
Innovative Cable TV
Innovative Systems
Inotel
Inside Connect
Cable
Insight
Integra Telecom
Inter Mountain
Cable
Inter-County Cable
Interstate
Cablevision
Intertech Private
Cable
InviTV
Iron River
Cooperative TV
Irvine Community
TV
ITV-3
J & L Cable
J & N Cable
Jack McClanahan
Cable TV
Jackson Energy
Authority
Jaguar
Communications
James Cable
Partners
James Valley
Cooperative
Telephone
Jayroc Cablevision
Jefferson County
Cable
Jefferson Telecom
Jeffersonville Cable
TV
01376, 01877, 01982
01376, 01877, 01982
01376
01898
02437
01376
01376, 01877
02345
01877
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
02437
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982, 03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Jet Broadband
Johnston County
Cable
Journeyvision Cable
JP PTT
01376
01376, 01877, 01982
01376, 01877, 01982
01615
Cable Set Top Box (K to N)
K-Communications
Kabel Deutschland
Kalida Telephone
Kalona Cooperative
Telephone
Kaplan Telephone
Karban TV Systems
KAS Cable TV
Kaslo Cable
KBS Cable TV
Keene Valley Video
Kelley
Communications
Kennebec
Telephone
Kennedy
Cablevision
Kentucky Ridge
Country
Communications
Keta Cable
KFW
Communications
Kincardine Cable TV
Kings Bay
Communications
Kiss
KLiP
KM Telecom
Knology
KoolConnect
Koomiut
Cooperative
KPN
01376, 01877, 01982
02165
01376, 01877, 01982
02586
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
02132
01376, 01877, 01982
01481
01877, 01376
01481
01376, 01877, 01982
02952, 02437
Kraus Electronic
Systems
Kudzu Cable TV
Kugluktuk
Cooperative
Kuhn
Communications
L & J Cable
La Harpe
Communications
La Harpe Video and
Data Services
Lafayette Utilities
System
Laguna Serrano
Cable
Lake Cable
Lakeland
Cablevision
Lakeland Telecom
Lakeview Cable
Lamont Digital
Systems
Lang
Laurel Highland
LB Cable
Lehigh Valley
Cooperative
Telephone
Lemonweir Valley
Telephone
Lexcom Cable
Services
Liberty Cablevision
Liberty
Communications
Limestone
Cablevision
Lincoln Cable
Television
Lincolnville
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01481, 01877, 01982, 01998
01481, 01998, 03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982, 02187
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
01376
01481, 02586
01376, 01877, 01982
01376
01376
Lindsey
Communications
LISCO
Litestream Holdings
LNE Telco
Localtel
Lockesburg
Cablevision
Lodgenet
Entertainment
Lone Pine Cable TV
Longview
Communications
Lonsdale Video
Ventures
Loretel Cablevision
Loretel Systems
Lost Island Cable
TV
Lumos Networks
Lycom
Communications
M-Tek Systems
M.T.C. Cable
Maddock Cable TV
Madison
Communications
Madison County
Cable
Magio Sat
Magnet
Mahaska
Communications
Mainstreet
Communications
Maitland Cable TV
Mallard Cable
Manawa Telecom
Manning Municipal
Utilities
Manti Telecom
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
01376
01376, 01877, 01982
01998, 03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01982
01376, 01877, 01982
02132
01615
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02586
01376, 01877, 01982
01481, 01998, 03028
Marco Island Cable
01376, 01877, 01982
Markdale Cable TV
Marne & Elk Horn
Telephone
Marquette-Adams
Telephone
Martelle
Communications
Cooperative
Mascon Cable
Masset-Haida TV
Society
Massillon Cable
Matanuska
Telephone
Association
Matrix Cablevision
Mattawamkeag
Cablevision
McDonough
Telephone
Cooperative
McKee TV
Enterprises
McNabb Cable
MCV Broadband
Media One
Mediacom
Mediapolis
Telephone
Mediastream
Megacable
Meo
Merrimac
Communications
Metlakatla Indian
Community TV
MetroCast
Cablevision
MetroNet
Metropolitan Cable
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376
01481, 02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877
01376, 01877, 01982
01376, 01877, 01982
01376, 01982
01376
01376
02401
01376, 01877, 01982
01376, 01877
01376, 01982, 01877
01877, 0858
01376, 01877, 01982
MGS Cablevision
MHTC
01376, 01877, 01982
01481, 01998, 03028
Mi-Connection
Microwave Satellite
Technologies
Mid Century
Telecom
Mid Missouri
Broadband & Cable
Mid Missouri
Telephone
Mid-Coast
Cablevision
Mid-Hudson Cable
Mid-Rivers
Communications
Mid-South
Cablevision
Midamerican Cable
Systems
Midcontinent
Communications
Midstate
Communications
Midtel Cable TV
Milcom Cable
Milford Cable TV
Milk River Cable
Club
Millennium Telecom
Millheim TV
Transmission
Millington CATV
Minburn
Communications
Minerva Valley
Cable
MINET
MLGC Cable TV
MM&G Enterprises
MMDS Wireless
01877
01481, 01998, 03028
01481, 01615
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
01877
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
East
Mobius
Communications
Monroe Cablevision
Monroe Utilities
Montana Opticom
Moosehead
Enterprises
Morris Broadband
Morristown Utility
Systems
Mosaic Telecom
Motorola
Moultrie
Telecommunications
Mountain Shadows
Cable TV
Mountain
Telecommunications
Mountain Zone TV
Movistar
Moxi
Mt. Baker Cable
MTC
MTC Technologies
MTS
Multiband Cable
Municipality Cable
Operator
Murphy Cable
Murray Electric
System
Muscatine Power &
Water
N.W.
Communications
National Cable
Naujat Cooperative
NDTC
Nebraska Central
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01877
01376, 02586
01376, 02437, 02378, 01998, 00858, 02952,
01562, 01982, 02401
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
03288
02187
01376, 01877, 01982
01376, 01877, 01982
01376, 01982
01998
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
Telecom
NEIT
Nelson County
Cablevision
Nelsonville TV
Cable
Nemont
Communications
NET
New Century
Communication
New Day
Broadband
New England Cable
New Jersey
Broadband
New Knoxville Cable
Systems
New North Networks
New Paris Quality
Cablevision
New Visions
Communications
New Windsor Cable
TV
Newcastle
Cablevision
Newpath
Communications
NewWave
Communications
NexHorizon
Communications
Nexicom
Communications
Nextgen
Communications
Niagara Community
TV Cooperative
Nimpkish Valley
Communcations
Nittany Media
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
01883
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877, 01982
01376, 02187
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
01376, 01877, 01982
01376, 01877, 01982
01376
Nor-Cal Cable
Systems
01376, 01877, 01982
Nortex
Communications
North American
Communications
North Central
Telephone
North Crossroads
Communications
North Dakota
Telephone
North Star
Cablevision
North State
Communications
North Texas
Broadband
North Yellowstone
Cable TV
Northern Cable
Holdings
Northern Lakes
Cable TV
Northland
Communications
Northside TV
Northstar
Broadband
Northwest
Communications
Northwest
Community
Northwest Iowa
Telephone
Northwest
Telephone
Cooperative
NorthwesTel
Norvado
Norwood Light
Broadband
01376, 01877, 01982
01376, 01877, 01982
02345
01376, 01877, 01982
02586
01376, 01877, 01982
00858
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01982
01376, 01877, 01982
01877
01877
01376, 01877, 01982
01376
02586
01376
Nova Cable
Management
Nova Cablevision
Novus
NPG Cable
Nsight
NTC Cable Services
nTelos
NTL
NTS
Communications
NU Telecom
NuLink
Numericable
Nushagak
Cooperative
01376, 01877, 01982
01376, 01877, 01982
01376, 01877
01376
02345, 02586
01376, 01877, 01982
01998
01060
01376, 01877, 01982
01998, 03028
01877, 01376, 01982
02436
01376, 01877, 01982
Cable Set Top Box (O to S)
Oak Cable Systems
Of Iowa
Oak Hill Cablevision
Oasis
Communications
Oi TV
Omni III Cable TV
Oneida Cablevision
OneLink
OneSource
Communications
Ono
Open IPTV
Opp Cablevision
Optimum
Optimus Clix
Optus
Orange
Orbitel
Communications
Oregon Cable
Group
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
03452, 03454
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01562
01615
01376, 01877, 01982
01877
02437
01060
02407
01376
01376, 01877, 01982
Orion Cablesystems
OTEC
Communications
Our Cable
Overton County
Cable
Oxford Networks
Pace
Packerland
Broadband
Paleajook
Cooperative
Palmer Mutual
Telephone
Palmetto Rural
Telephone
Cooperative
Panasonic
Pangnirtung
Cooperative
Panhandle
Telephone
Panora
Telecommunications
Paragould Light &
Water
Parish
Communications
Park Region Mutual
Telephone
Park TV &
Electronics
Partner
Communications
Pathway Com-Tel
Patterson Cable TV
Paul Bunyan
Communications
PBT Cable Services
PC One Cable
PDQ Cable TV
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877, 01060, 02620, 01982, 01582, 01376,
01883, 02401, 03454
01376
01376, 01877, 01982
01376, 01877, 01982
00858
01982
01376, 01877, 01982
01376
01481
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 02345, 03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
PEC Cablevision
Pegasus
Communications
Peoples CATV
Persona
Communications
Philippi
Communications
Philips
Phoenix
Phoenix Cable
Phonoscope
Communications
Pickwick
Cablevision
Piedmont Cable
Services
Pine Bluff Cable
Pine Island
Telephone
Pine River Cable
Pine Tree
Cablevision
Pineland Telephone
Cooperative
Pinpoint
Communications
Pioneer
Pioneer Cable
Pioneer
Communications
Pioneer Long
Distance
Pitcairn Community
Cable TV
Plantation Cable
System
Pleasant Vision
Polar
Communications
Polaris Cable
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01582, 02294
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01481, 01998, 03028
01376, 01877, 01982
01376, 01877, 01982
01481, 01615, 01898, 02586
01376, 01877, 01982
01877
01376, 01877, 01982
01376, 01877, 01982
01898, 01615
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02586
01376, 01877, 01982
Ponderosa
Cablevision
Poplar Bluff
Municipal Utilities
Portal Cablevision
Portugal Telecom
Post Cablevision
Premier
Communications
Premiere
Price County
Telephone
Prime Cable
Corporation
Prime Time Cable
Princetown Cable
Private Cable
Systems
Private Network
Cable Systems
Project Mutual
Telephone
Project Services
PSC
PTCI
PVT Networks
Quality Cable TV
Quality One
Technologies
Quinter Cable
Qwerty.TV
R & R Cable
Raftview
Communications
Rainbow Cable
Rainbow
Communications
Rainbow Lake
Cable TV
Rainier Connect
Ramapo Cable
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
02401
01376, 01877, 01982
01376
02620
01481, 01998, 03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
01481, 01998, 03028
01376
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
01898
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Rancho Murieta
Association
Randolph
Telephone
Rapid
Communications
RC Communications
RCN
Reach Broadband
Readlyn Telephone
Rebeltec
Communications
Red River Cable
Reds Cable TV
Regional Cable TV
Reinbeck
Telecommunications
Reservation
Telephone
Reserve Long
Distance
Resnet
Communications
Resort Cable
Reveille Broadband
Reynolds Cable
RGA Cablle
Ridgewood
Cablevision
Ringgold Telephone
Rio Virgin
Telephone
Riondel Community
Cable Society
Ripley Video Cable
Ritter Cable
River Road Cable
River Valley Cable
TV
River Valley
Telecommunications
01376
02586
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01998, 02345
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
Riverside
Cablevision
01376, 01877, 01982
Riviera Cable TV
Robins Cable TV
Rock Port
Cablevision
Rocky Mountain
Cable Systems
Rogers
Roome
Telecommunications
Royal Telephone
RTC
RTEC
Communications
Runestone Telcom
Rural Route Video
Rural Telephone
Company
RuralWest
Russellville Electric
Plant Board
S & K TV Systems
S&T
Communications
S-GO Video
S.Bryer Cable TV
Sagem
Sagemcom
Sallisaw Municipal
Authority
Samsung
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
San Bruno
Municipal Cable TV
San Carlos
Cablevision
San Juan Cable
San Simeon
Community Cable
Santel Comm
01376, 01877, 01982
01877, 01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01877, 01982
01376, 01877, 01982
02407, 02436, 03288
02407, 02436, 03007
01376, 01877, 01982
02407, 02015, 01877, 03477, 01060, 01987,
02589, 03265
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Cooperative
Sasktel
Satellite Cable
Services
Satview Broadband
Saugeen Telecable
Savage
Communications
Sayward Valley
Communications
Schindler Cable TV
SCI Cable
Scientific Atlanta
Scio Cablevision
Scott Telecom And
Electronics
Scottsboro Cable
TV
Sea Island
Seaside Cable TV
Seaview
Communications
SecureVision
Semo
Communications
Senior TV
Service Electric
Service One Cable
Shannon Vision
Shaw
Shawano Municipal
Utilities
Shellsburg
Cablevision
Shen-Heights TV
Shenandoah Cable
Shenandoah
Telecommunications
Shentel
Sherburne Cable
01998
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877, 01982, 00858, 01987, 02401, 02436,
02345, 03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 02187
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Sherman
Cablevision
Shrewsbury Electric
& Cable
Silver Star
Communications
Simpson Country
Cable TV
SingTel
Siskiyou Cablevision
Sister Lakes Cable
Sjoberg's Cable TV
Skisat
SKT
SKY
Sky Angel
Sky Cablevision
SKY Deutschland
Skyline Cable
SkyPix
Sleepy Eye
Telephone
Small Town Cable
Smile Content
Smithville
Sogetel
Somerfield Cable
TV
Source Cable
South Benton
Cablevision
South Central
Communications
South Holt
Cablevision
South Slope
Communications
Southeast Cable TV
Southern Cayuga
County Cable
Southern Coastal
01376, 01877, 01982
01376, 01877
01481, 01998, 03028
01376, 01877, 01982
01998
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
02620
01376, 01877, 01982
01376, 01877, 01982
02620
02586
01481, 01998, 03028
02345
01376, 01877, 01982
02437
02586
01998
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Cable
Southern Kansas
Telephone
Southern Plains
Cable
Southern Vermont
Cable
Southey Cable
Southside TV
Southwest MN
Broadband
Southwestern Bell
Video Services
Spanish Fork
Spencer Municipal
Utilities
Spillway Cablevision
Spirit Broadband
Spring Creek Cable
Springcom
Springfield
Cablevision
Springville Cable
St. George Island
Cable
St. John Cable
Stanley Cablevision
Stanton Telecom
Star Cablevision
Starkville
Cablevision
Starlight
Communications
Starview Cable of
Delaware
Starvision
Starwest
Stellar
Communications
Stellar Private Cable
Systems
01376
01376, 01877, 01982
01376, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Stofa
Stowe Cablevision
02015
01376, 01877, 01982
Strategic
Technologies
Stubbs
Communications
Suddenlink
Summit Broadband
Summit
Communications
Sumner Cable TV
Sun Country Cable
Sunrise
Communications
Supercanal
Superior Cable &
Data
Supervision Cable
TV
SureWest
Surry Telephone
SWAT Cooperative
Sweetwater Cable
TV
Swisher Telephone
01376, 01877, 01982
01376, 01877, 01982
01877, 01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 02586
02586
01481, 01998, 03028
01376, 01877, 01982
02345
Cable Set Top Box (T to Z)
T-Home
TA Communications
Taloga Cable
TAT Cablevision
Tbaytel
TCSI Huntsville
TCT
TDS
TDS Telecom
Technicolor
Tekstar Cablevision
Tel-Star Cablevision
Tele-Media
02132
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
03028
01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Tele-Services
Tele2
Telecentro
Telecom Cable
Teledistribution
Amos
Telefonica
Telenet
Telepak Networks
TelePartners
Telerent Leasing
Corporation
Telestar Systems
Telewest
Telmex
Telsat Systems
Telus
Templeton
Telephone
TeNeT
Tesco Cable TV
Texas Mid-Gulf
Cablevision
Thames Valley
Communications
The Community
Agency
The Town of
Mountain Village
Cable
Thomson
Three River Digital
Cable
Throckmorton
Cablevision
TiftNet
Time Warner
Tip-Top
Communications
TiVo
Tobacco Valley
01376, 01877, 01982
00660
01376
01376, 01877, 01982
01376
03288, 03028
01920, 03477
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01987
01376
01376, 01877, 01982
03028
01376, 01877, 01982
01898
01376, 01877, 01982
01376
01376, 01877, 01982
01376
01376, 01877, 01982
01582, 01982, 03007, 02407
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877, 01376, 02187
01376, 01877, 01982
03265
01376, 01877, 01982
Communications
Tongue River Cable
TV
Total Cable Service
Touchet Valley
Television
TP
Trans-Video
Trappers Loop
Communications
Trenton Cable
Tri-County Cable TV
TrioTel
Communications
Troy Cablevision
Trust Cable TV
TruVista
Tudjaat Cooperative
Tulalip Broadband
Tullahoma Utilities
Tulugak
Cooperative
Turquoise Turtle TV
TV Cable
TV Cable Company
of Andalusia
TV Cable of
Winamac
TV Northeast
TV Service
TVB
TVC
TVision
TVMAX
TVS Cable
Twin Valley
Communications
Two Creeks Cable
Ucluelet Video
Uintah Basin
01376, 01877, 01982
01376
01376, 01877, 01982
02407
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376
01376
01376, 01877, 01982
01481, 01998, 03028
01376, 01877, 01982
01615
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Electronic Telecom
UMBC
Union Telephone
Unitah-Strata
Networks
United
Communications
Association
United States
Gypsum
United Telephone
Unitymedia
Universal
Cablevision
Universal Satellite
Cable
UPC
UPC Cablecom
Upper Peninsula
Communications
US Online
US Sonet
USA Cablesystems
USA Companies
Utica Cablevision
Utilities Board City
of Foley
Utility Systems
Development
Uwharrie
Communications
Valley Cable &
Satellite
Communications
Valley Cable TV
Valparaiso
Communications
Venture
Communications
Cooperative
Venus Telephone
01376, 01877, 01982
01376, 01877, 01982
01376
01376
01376, 01877, 01982
01376, 02586
03477
01376, 01877, 01982
01376, 01877, 01982
01582, 03477, 00660, 01060
01582, 03477
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
02586
01376, 01877, 01982
01376, 01877, 01982
01376
01481, 01998, 03028
01376, 01898
Cooperative
Veracity
Communications
Verizon
Vernon Telephone
Cooperative
Vicksburg Video
Videotron
Vidia
Communications
Vidion Cable
Viken Fibernett
Viola
Communications
Virgin Media
Vision
Communications
VisionComm
Vital
Communications
Vivo
Vodafone
Vogtmann
Engineering
Volcano Vision
W.D.B.
Communications
Wabash
Independent
Networks
Wadsworth Cable
TV
Waitsfield Cable
Walnut
Communications
Walnut Grove Cable
TV
Ward
Communications
Warwick Valley
Telephone
01376, 01877, 01982
02378
02586
01376
01877
01376, 01877, 01982
01376, 01877, 01982
02437
01376, 01877, 01982
01987, 01060, 03265
01376
01376, 01877, 01982
01376, 01877, 01982
03288
02401
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376
01376
01376, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
Washington County
Rural Telephone
Cooperative
01376, 01877, 01982
Watch TV
Waterville Cable TV
Watson Cable
Wave Broadband
Wavevision
WCTA
WEHCO Video
Weiss Lake Cable
West Alabama TV
Cable
West Carolina
Telephone
West Central
Telephone
West Lake
Cablevision
West River Cable
Television
WesTel Systems
Western Broadband
Western Cable
Service
Western Iowa
Telephone
Western Telephone
Company
Western Wisconsin
Communications
Westman
Communications
Westphalia
Broadband
Wetherell Satellite
Cable TV
WFL Cable
Television
White County Video
WideOpenWest
01481, 01998, 03028
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877
01376, 01877, 01982
03028
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01877
01376, 01877, 01982
01376, 02586
01376, 02187
02586
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 02187
Wikstrom Systems
Wilco Electronic
Systems
Wilkes
Telecommunications
Willamette
Broadband
Windbreak Cable
TV
Windjammer Cable
Windom
Communications
Windstream
Winslow
Communications
Wire Tele-View
Wireless One
Wittenberg
Telephone
Wood County
Telephone
Woodsfield
Municipal Cable
Worth Cable TV
WT Services
WTC
Communications
WTCI Cable
Wyandotte
Municipal
Yadkin Valley
Telecom
Ycom Networks
Yelcot Video Group
Yelo
Ygnition
Zampelli Electronics
Ziggo
Zito Media
Zoom Media
01376, 01877, 01982
01376, 01877, 01982
01481, 01998, 03028
01376
01376, 01877, 01982
01376, 01877
01877
01376, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01877, 01982
01376, 01982
02345
01376, 01877, 01982
01376, 01877, 01982
01376
01376, 01877, 01982
01376, 01877, 01982
02589, 02015, 00660, 02401
01376, 01982
01376, 01877, 01982
Satellite Set top Box
@sat
Acoustic Solutions
ADB
AEG
Agora
Airis
Airtel
Akira
Alba
Altech UEC
Amstrad
AMTC
Arledge Electronics
Arnion
ASDA
AssCom
Astro
Aurora
Austar
Auvisio
Avanit
Axil
Ballard Rural
Telephone
Cooperative
Bell
Bell Satellite TV
Biostek
Black Diamond
Boca
Boshmann
Boxer
BskyB
Bulltech
Bush
Cablecom
01300
01284
00887
02738, 02813
01284
02813
02248
02738
01284, 02034
02059
00847, 01662, 01175, 01693, 02467
02738, 02813
00775
01300
01284
00853
01100, 02026
00879
00879
02738, 02813
01631
02738
00775
Caiway
02443, 00253
00775
00775
02738
01284
02026, 02813
01631
02443, 01692
01175, 00847, 01662
02738
02376, 01284, 02034, 02813
01195, 01197
Canal Digitaal
Canal Digital
Canal+
CanalSat
Century
CGV
Chess
Cignal
City of Cawker City
Cable
CityCom
Claro
Clatronic
Com Hem
Comag
Coship
Country Vision
Cable
Croner
Crown
Cyfra+
Cyfrowy Polsat
D-box
DASAN
Delta
Denver
Deutsche
Telekabel
Dgtec
Dicra
Digi
Digiality
Digihome
DigiLogic
DigiQuest
DigitAlb
DigitalBox
Digiwave
DirecTV
00853, 02957
00853
00853, 02657, 01195, 01197
00853, 02657
00856
02034
02026
02835
00775
01176
03787, 03790
02738
01176, 01915
02026, 02813
03787, 03790
00775, 00869
02813
01284
00853, 01409
00253, 0853, 01409
01114
03321
02443
02738
01195, 01197
01631
02738
02026
02813
01284, 02034
01284, 02034
01300, 02738, 01631
01195, 01197
01631, 01100
01631
01377, 00099
Dish Network
Dishpro
DishTV
DMT
DMTech
DRE
Dream Multimedia
DSE
DSTV
DTK Deutsche
Telekabel
Dual
Durabrand
Dyon
Echostar
Edision
Elta
Energy Sistem
Etisalat
Evesham
Technology
Finlux
FinnSat
Fortec Star
Foxtel
Freesat
Freesat+
Frontier
Communications
Fuji Onkyo
Galaxis
General Instrument
General Satellite
Globo
GoGen
GOI
Gold Box
Gold Vision
00775
00775
01300
03321
02738
01176
01237, 01652, 01923
02813
00879
01195, 01197
Goodmans
01284, 02376, 02034
02034
01284, 02034
02738, 02813
00775, 00853, 01409
01631
02738
01631, 02813
02443
02034
02034
01195, 01197
01631
01356, 00879, 01176
01692, 02376
02443
00775
01631
00853, 00879
00869
01176
02026, 02957
02738
00775
00853
01631
Gradiente
Grocos
Grundig
Hanseatic
HD+
HDT
Hirschmann
Hitachi
Hornet
HTS
Huawei
Hughes Network
Systems
Humax
00887, 00856, 00099
01409
00847, 02376, 02034, 01284, 00853, 00879
01100
02443
03321
02026
02034, 01284
01300
00775
03787
01377
ibox
ID Digital
Illusion
Imagin
Imperial
Indovision
iNETBOX
Innova
IQ
ISkyB
JVC
Kabel Deutschland
KabelBW
KabelNoord
Kaon
Kenwood
Koenig
KT
Lava
LG
Linsar
01176, 02443, 01808, 01915, 02408, 01377,
03321, 01989, 02616
01652
01176
01631
01195, 01197
01195, 01197
01989, 00856, 00887
01652, 01237
00099
02813
00887
00775, 01284
01195, 01197
01195, 01197, 01915
00253, 02443
01300
00853
01631
03321
01631
03321
01284
Lodos
Logik
LogiSat
01284
01284, 02034
02026, 02813
Luxor
Macab
Majestic
Manhattan
Maplin
Marusys
Mascom
Matsui
Maximum
Mediabox
MediaSat
Mediascape
Medion
Mega TV
MegaSat
Metronic
Micro
Micro electronic
Milestone
Communications
Mitsai
Morgan's
Motorola
Movistar
Multichoice
Murphy
Mysat
NET
Netsat
Next Level
Nokia
NPG
NTV Plus
Olleh TV
Olleh-Skylife
Onn
02034
00853
02738
01300
02034
03543
02738
01284
02813
00853
00853
02835
02026
03321
02034, 02813, 01631, 02738
02738, 01631
02813
02813
00775
Opticum
Optus
02957
00879, 01356
02738
02026
00869, 00856, 03469
01409
00879, 02059, 02060
02034
02738
01409
00099, 00887
00869
00853
01631
01692, 02443
03321
03321
02034, 01284
Orbitech
Orton
Pace
Sat Control
SAT+
Satellite Operations
Satplus
SatyCon
01100, 01195, 01197
02957
00847, 01356, 00887, 01175, 01693, 00853,
01662, 02467, 02657, 03469, 01377, 02059,
02060, 02211, 03787, 03790, 02620
01284
01409
02813
00879
00847
00099, 00853, 01114, 02619, 00856, 00887,
02211, 03469
00853
02835
01114, 01195, 01197
01176, 01195, 01197
00853
01284
03321
03321
01377
00869
02957
01692
00853
01300, 01631
01692, 01114
01692
03063, 00253, 01377, 01989, 02467, 00853,
03321, 01662, 01693, 03834
01300
01409
00775
01100
01631
Schaub Lorenz
Schwaiger
Schwaiger CS
Scott
02034
01631, 02813, 02957
01631
02738
Pacific
Palcom
Palsonic
Panasat
Panasonic
Philips
Pioneer
PLDT
Premiere
Primacom
Pro Basic
Proline
Qook TV
Qook-SkyLife
Qwest
RadioShack
Raduga TV
RiksTV
Roadstar
SAB
Sagem
Sagemcom
Samsung
SEG
Shark
Sharp
Shaw Direct
Sherwood
Shinelco
Sigmatek
SilverCrest
SKY
Sky Brasil
SKY Deutschland
SKY Italia
SKY Mexico
SKY New Zealand
SKY PerfecTV!
SkyCable
SkyLife
Skylink
Skymaster
Skyplus
SkySat
Skyworth
SL
SM Electronic
Smart
Sony
Star
Star Choice
Stream System
Strong
01284, 02034
01631
02034
00869
01409
02738
02738, 02813
02026
00856, 00847, 01662, 00887, 01175, 02619,
01693, 00099, 01114, 01377, 01915, 02467,
03469
00856, 00887, 01377, 02619
02443, 01114, 01915, 02620
01693, 02467, 00853, 01356
00856, 02619, 00887, 01377, 03469
02211
02616
01631
03321
02443, 02957
01409
02026, 01175
01100
01631, 02835
02026
01409
01631
00847, 00853
00887
00869
01300
01409, 00879, 02813, 01300, 00853, 01284
Sunny
Sunstech
Supernova
T-Mobile
TATA Sky
TDS Telecom
Teac
01300
02738
00887
02443
03575
00775
02813
Technicolor
Technika
TechniSat
Techwood
tekComm
TELE System
Tele2
Telefonica
Telestar
Televes
Teleview
Communications
Televisa
Telsey
Telstra
Telus
Tevion
Thomson
TNT SAT
Toshiba
TrekStor
Triangle
Communication
System
Triax
Tricolor TV
True Visions
TV Vlaanderen
TVA Digital
TVB
UEC
03469
01284, 02034
01195, 01197, 01100, 02813
01284, 02034
02738
01409, 02738, 02813
01195, 01197
01692, 01409
01100, 01197, 01195
01300
00775
United Satellite
America
United States
Wireless
Unitymedia
Unixbox
USA Wireless
Satellite TV
00775
00887
02738
01356
00775
01409, 02026, 02813
00847, 01175, 00853, 01662, 02619, 03469
01692, 01195, 01197
01284
02738
00775
00853, 01631
01176
02408
00853
01692, 01409
01989
00879, 01356
00775
01915
01652
00775
Vectra
Vestel
Via Embratel
Viasat
VisionNet
Viva
Vivo
Voom
VTC
Vu+
Walker
Wharfedale
Windstream
Wisi
World Satellite
Cable Systems
Woxter
Xoro
Xtreme
Yes
Zehnder
Zenith
Ziggo
Zircon
01195, 01197
01284, 02034
03787
01197, 0253, 01195
01631
00856
01409
00869
03834
03543
02034, 01284
02034
00775
02957
00775
02813, 02738
02813
01300
00887, 01631
02034, 03469
00856, 00253
02443
02957
Video - Accessory
A.C.Ryan
ABS
Acer
Alienware
Apple
Boxee
Claritas
CyberPower
D-Link
Daily Media
Dell
Digitech
Elonex
02709, 03350
01272
01272
01272
02615
03693
01272
01272
03693
01272
01272
02260
01272
Eminent
Emtec
Fantec
Fujitsu Siemens
Gateway
Hewlett Packard
hFX
Howard Computers
Hush
iBUYPOWER
iconBIT
ISTAR
Linksys
Mede8er
Media Center PC
Microsoft
Mind
NiveusMedia
Northgate
Packard Bell
Philips
PopBox
Popcorn Hour
Ricavision
Roku
Sony
Stack 9
Systemax
Tagar Systems
Toshiba
Touch
Trust
VIA Technologies
Viewsonic
Voodoo
02260
02709
02709
01272
01272
01272
01272
01272
01272
01272
02709, 03350
02260
01272
02709
01272
01272, 01805
01272
01272
01272
01272
01272
02260
02260
01272
03061
02713, 01272
01272
01272
01272
01272
01272
01272
01272
01272
01272
Western Digital
Woxter
Xbox
02558
02709
01805, 01272
ZT Group
01272
CD
Advantage
AH!
Aiwa
Arcam
Atoll Electronique
Audio Research
Audiolab
Audiomeca
Audioton
AVI
Balanced Audio
Technology
Cairn
California Audio
Labs
Cambridge
Cambridge Audio
Carver
CCE
Cyrus
Denon
DKK
DMX Electronics
Dynaco
Genexxa
Goldmund
Grundig
Harman/Kardon
Hitachi
Integra
JVC
Kenwood
Krell
Linn
70032
70157
70157
70157
70157
70157
70157
70157
70157
70157
70157
Loewe
Magnavox
70157
70157
70157
70029, 70303
70157
70157
70157
70157
70157
70766
70000
70157
70157
70032, 70000
70157
70157
70157
70032
71817
70072
70157, 70036
70157
70157
Marantz
Matsui
MCS
Memorex
Meridian
Micromega
Miro
Mission
Myryad
NAD
Naim
NSM
Onkyo
Optimus
Panasonic
Philips
Pioneer
Polk Audio
Primare
Proton
QED
Quad
Quasar
Radiola
RCA
Restek
Revox
Rotel
SAE
Sansui
SAST
Siemens
Silsonic
Simaudio
Sonic Frontiers
Sony
Sylvania
70157, 70029
70157
70029
70032
70157
70157
70000
70157
70157
70721, 70000
70157
70157
71817
70032, 70000
70303, 70029
70157
70032
70157
70157
70157
70157
70157
70029
70157
70032
70157
70157
70157
70157
70157
70157
70157
70036
70157
70157
70000, 70490
70157
TAG McLaren
70157
Tandy
Tascam
Teac
Technics
Thorens
Thule Audio
Universum
Victor
Wards
Yamaha
Zonda
70032
73095, 73511, 73533
73531, 73532, 73551
70303, 70029
70157
70157
70157
70072
70032, 70000, 70157
70036, 70032, 70490
70157
Cassette Deck
Aiwa
Arcam
Audiolab
Carver
Denon
Grundig
Harman/Kardon
Inkel
JVC
Kenwood
Magnavox
Marantz
Myryad
Onkyo
Optimus
Panasonic
Philips
Pioneer
Polk Audio
Radiola
RCA
Revox
Sansui
Sony
Tascam
Technics
40029
40076
40029, 40229
40029
40076
40029
40029
40070
40244
40070
40029
40029
40029
42157
40027
40229
40029, 40229
40027
40029
40029
40027
40029
40029
40243, 40170
73095
40229
Thorens
Victor
Wards
Yamaha
40029
40244
40027, 40029
40097
Audio - Accessory
Apple
Jamo
Onkyo
Polk Audio
81115
82228
81993, 82351, 82990
82228
Receiver
Integra
Onkyo
52503
52503
Cable PVR Combination
Access
Communications
Adams Cable TV
ADB
Armstrong
Arris
Atlantic Broadband
ATMC
Bend Broadband
Blue Ridge
Communications
Bright House
Buckeye Cable
System
Cable Axion Digitel
Cable One
Cablecom
Cablevision
Cablevision du
Nord
CCAP
01376, 01877
Charter
Cincinnati Bell
01376, 01877, 02187
01877, 01376
01376
01920
01376, 01877
02187
01877
01376
02187
01877
01877, 01376
01376, 01877, 02187
01376
01376, 01877
01582
01877, 01376
01376
01877
Cisco
Citycable
Cogeco
Comcast
Cox
Darty Box
Digeo
Freebox
Grande
Communications
Humax
ImOn
Communications
Insight
Inter Mountain
Cable
Kabel Deutschland
Knology
Mediacom
MetroCast
Cablevision
Midcontinent
Communications
Motorola
Moxi
NET
NorthwesTel
Novus
Numericable
Pace
Panasonic
Philips
Pioneer
RCN
Rogers
Sagem
Samsung
Scientific Atlanta
Service Electric
01877, 02589, 01982, 01582, 01883, 02401,
03265
03477
01376, 01877, 01982
01376, 01877, 01982, 02187
01877, 01376
02436
02187
01976
01877, 01376
02620, 02165
01877
01376, 01877
01877
02165
01877
01376, 01877
01877
01376, 01877
01376
02187
01883
01376
01376, 01877
02436
01877, 02620, 01582, 01883
01982
01582
01877
01376
01877, 01376
02436
03477, 01877, 01987, 02589, 03265
01877, 01982, 01987, 02436, 02401
01376, 01877
Shaw
SKY
SKY Deutschland
Source Cable
Suddenlink
Telenet
Telewest
Thomson
Time Warner
TiVo
Unitymedia
UPC
UPC Cablecom
Videotron
Virgin Media
Wave Broadband
Western Iowa
Telephone
Westman
Communications
WideOpenWest
Ziggo
01376, 01877, 02187
02620
02620
01376
01877, 01376
01920, 03477
01987
01582
01877, 01376, 02187
03265
03477
01582, 03477
01582, 03477
01877
01987, 03265
01376
01877
01376, 02187
01877, 01376, 02187
02589
IPTV
ADB
Alcom
Altibox
Amino
Arkwest
Arvig
Communication
Systems
AT&T
ATMC
Ballard Rural
Telephone
Cooperative
Bayland
Communications
Bell
02586, 01481, 01998, 03028
02437
02437
01615, 01481, 01898, 01998, 03028
01481, 01998
01998, 02345
00858
01998, 03028
02586
02586
01998
Bell Aliant
Bell Fibe TV
Bledsoe Telephone
Cooperative
Bloomingdale
Communications
Blue Valley
Telecommunications
Bouygues Telecom
Brandenburg
Telecom
BT
BTC Broadband
Burlington Telecom
Cabovis
CalTel Connections
Canby Telcom
Cannon Valley
Cablevision
CenturyLink
Cisco
ClubInternet
CoopTel
CRST Telephone
Authority
Dakota Central
Telecommunications
Dalton Cable
Television
Delta Cable
Diverse
Communications
Du
Eagle Broadband
Eagle Valley
Telephone
EasyTEL
Echostar
Etex
Farmer's Telephone
01998
01998
01481, 01998
01481, 01998, 03028
01898
03007
01481, 01998
02294
02586
01481, 01615
02436
02586
01481
01481, 01998
01998
00858, 03028, 02345, 02378
02132
00858, 01615, 01898
01481, 01998
02345
01877, 01982
01376
01898
02401
01481, 01998
01481, 01998
01481, 01998, 03028
03452
02586
01998, 03028
Cooperative
Golden Belt
Telephone
Gorham
Communications
Griswold
Cooperative
Telephone
GTI
Harrisonville
Telephone
Hathw@y
Horizon Cable TV
Hotwire
HTC
Communications
Innovative Systems
Inotel
Integra Telecom
Interstate
Cablevision
JP PTT
Kiss
KM Telecom
KoolConnect
KPN
Lakeland
Cablevision
Lemonweir Valley
Telephone
Liberty
Communications
Lonsdale Video
Ventures
Lumos Networks
Manawa Telecom
Manti Telecom
Matanuska
Telephone
Association
Meo
02586
01481
01481, 01998
01481, 01998, 03028
02586
02043
02586
02586
01481, 01998
01898
02437
02345
01481, 01998
01615
02132
01481
01481
02952, 02437
01481, 01998
01481, 01998
02586
01481, 01998
01998, 03028
02586
01481, 01998
01481, 02586
02401
MHTC
01481, 01998
Microwave Satellite
Technologies
Millennium Telecom
Minburn
Communications
MM&G Enterprises
Motorola
Movistar
MTS
NDTC
North Central
Telephone
North Dakota
Telephone
North State
Communications
Norvado
Nsight
NU Telecom
Oi TV
Open IPTV
Optimus Clix
Orange
OTEC
Communications
Pace
Panora
Telecommunications
Paul Bunyan
Communications
Pine Island
Telephone
Polar
Communications
Poplar Bluff
Municipal Utilities
Portugal Telecom
Price County
Telephone
01481, 01998
01481, 01998
01481, 01998, 03028
01481, 01998
02378, 01998, 02437, 0858, 02952, 01376
03288
01998
01481, 01998, 03028
02345
02586
00858
02586
02345, 02586
01998, 03028
03452, 03454
01615
02437
02407
02586
02401, 03454
01481
02586
01481, 01998
02586
01481, 01998
02401
01481, 01998
Project Mutual
Telephone
01481, 01998
PSC
Quality One
Technologies
Qwerty.TV
Randolph
Telephone
Readlyn Telephone
Reservation
Telephone
River Valley
Telecommunications
S-GO Video
Sagem
Sagemcom
Samsung
Sasktel
Scientific Atlanta
Silver Star
Communications
SingTel
SKY Deutschland
Skyline Cable
SkyPix
Smile Content
Smithville
Sogetel
SureWest
Surry Telephone
SWAT Cooperative
T-Home
Telefonica
Telus
TeNeT
Thomson
TV Northeast
TVB
Twin Valley
Communications
01998
01481, 01998
01898
02586
02586
01998, 02345
01481, 01998
01877
02407, 03288
02407
02407
01998
00858, 02345, 03028
01481, 01998, 03028
01998
02620
02586
01481, 01998
02437
02586
01998
01481, 01998, 02586
02586
01481, 01998, 03028
02132
03288, 03028
03028
01898
03007, 02407
01481, 01998
01615
02586
United Telephone
Venture
Communications
Cooperative
02586
01998
Verizon
Viken Fibernett
Vivo
Watch TV
West Carolina
Telephone
Western Wisconsin
Communications
Westphalia
Broadband
Wilkes
Telecommunications
Yadkin Valley
Telecom
02378
02437
03288
01481, 01998
03028
02586
02586
01481, 01998
02345
IPTV PVR Combination
ADB
Altibox
Amino
AT&T
ATMC
Beeline
Belgacom TV
Bell
Bell Aliant
Bell Fibe TV
Bouygues Telecom
BT
Cabovis
CenturyLink
Cisco
ClubInternet
Deutsche Telekom
Du
Echostar
02437
02437
01615, 01898
00858
03028
03028
02132
01998
01998
01998
03007
02294
02436
01998
00858, 03028, 02132, 02345, 02378
02132
02132
02401
03452
Freebox
i-CAN
Innovative Systems
InviTV
Kiss
KPN
Lumos Networks
Magio Sat
Magnet
Meo
Motorola
MTS
Numericable
Oi TV
Orange
Pace
Philips
Portugal Telecom
Sagem
Sagemcom
Samsung
Sasktel
Scientific Atlanta
SKY Deutschland
SureWest
T-Home
Telefonica
Telus
Thomson
Verizon
Vodafone
01976
02437
01898
02437
02132
02952, 02437
01998
02132
01615
02401
02437, 02378, 00858, 01998, 02952, 02401
01998
02436
03452, 03454
02407
02401, 03454
02294
02401
02407, 03288
02436, 02407, 03007
02407
01998
00858, 02345, 02401, 03028
02620
01998
02132
03028, 03288
03028
03007
02378
02401
PVR
DirecTV
Humax
Panasonic
Philips
RCN
ReplayTV
20739
20739
20616
20739
20739
20616
Sonic Blue
Sony
TiVo
20616
20636
20739, 20636
SN 29401952HTML_EN
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.