© Siemens AG 2010
Embedded/
PC-based Automation
9/2
9/2
9/12
9/14
9/20
9/24
Embedded Automation
SIMATIC S7 modular
embedded controller
SIMATIC IPC427C bundles
SIMATIC HMI IPC477C embedded
SIMATIC Panel PC 477B Bundles
SIMATIC WinAC MP
9/28
9/28
9/34
9/40
PC-based Control
SIMATIC WinAC RTX
SIMATIC WinAC RTX F
SIMATIC WinAC ODK
Brochures
For brochures serving as selection
guides for SIMATIC products refer to:
http://www.siemens.com/simatic/
printmaterial
Siemens ST 70 N · 2010
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC S7 modular embedded controller
■ Overview
• Quick start in automation solutions with embedded PC platforms.
- SIMATIC WinAC RTX or WinAC RTX F preinstalled on EC31
ready for switch-on
- Prepared for use in a SIMATIC environment with PROFINET
and Industrial Ethernet
- Commissioning, as for S7-300, by automation specialists
- Configuring and programming with SIMATIC STEP 7 over
Industrial Ethernet
- Optional visualization
• Modular expansion capability:
Central expansion with
- S7-300 I/O (SM modules of S7-300)
- Expansion modules for additional PC interfaces, e.g. DVI-I,
USB, Gigabit Ethernet networks and memory card slots, as
well as PCI-104
• Rugged operation
- Operation without a hard disk, based on flash disk and
Windows XP embedded
- Operation without a fan
• Flexibility of a PC-based automation environment
- Free memory space on flash disk can be used for other PC
applications
- Use of WinAC ODK with SIMATIC WinAC RTX and WinAC
RTX F (read-only in safety-related program part)
- Connection option for USB devices
- Memory capacity expandable using multimedia card
• Data retentivity for WinAC RTX and RTX F without uninterruptible power supply (UPS)
■ Technical specifications
6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1FD00- 6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1DD000BA0
0BB0
0FB0
0BF0
0BG0
0BH0
9
SIMATIC S7-mEC, S7-mEC,
EC31
EC31-RTX
S7-mEC,
EC31-RTX F
S7-mEC,
EC31-HMI/RTX
128PT
S7-mEC,
EC31-HMI/RTX
512PT
S7-mEC,
EC31-HMI/RTX
2048PT
Hardware product version
04
04
04
04
04
04
Firmware version
V1.3
V1.3
V1.3
V1.3
V1.3
V1.3
Computer platform
SIMATIC S7
modular embedded controller
SIMATIC S7
modular embedded controller
SIMATIC S7
modular embedded controller
SIMATIC S7
modular embedded controller
SIMATIC S7
modular embedded controller
SIMATIC S7
modular embedded controller
Processor selection
Intel Core Duo
1.2 GHz
Intel Core Duo
1.2 GHz
Intel Core Duo
1.2 GHz
Intel Core Duo
1.2 GHz
Intel Core Duo
1.2 GHz
Intel Core Duo
1.2 GHz
Main memory
1 GB RAM
1 GB RAM
1 GB RAM
1 GB RAM
1 GB RAM
1 GB RAM
Flash Disk
2 GB
2 GB
2 GB
2 GB
2 GB
2 GB
Operating systems
Windows XP
embedded SP2
FP2007
Windows XP
embedded SP2
FP2007
Windows XP
embedded SP2
FP2007
Windows XP
embedded SP2
FP2007
Windows XP
embedded SP2
FP2007
Windows XP
embedded SP2
FP2007
• Rated value, 24 V DC
Yes
Yes
Yes
Yes
Yes
Yes
• permissible range,
lower limit (DC)
20.4 V
20.4 V
20.4 V
20.4 V
20.4 V
20.4 V
• permissible range,
upper limit (DC)
28.8 V
28.8 V
28.8 V
28.8 V
28.8 V
28.8 V
800 mA; without
backplane bus
and USB power
supply
800 mA; without
backplane bus
and USB power
supply
800 mA; without
backplane bus
and USB power
supply
800 mA; without
backplane bus
and USB power
supply
800 mA; without
backplane bus
and USB power
supply
800 mA; without
backplane bus
and USB power
supply
Product type designation
Product version
PC configuration
Power supply
Input voltage
Input current
• Rated value at 24 V DC
9/2
Siemens ST 70 N · 2010
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC S7 modular embedded controller
■ Technical specifications (continued)
6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1FD00- 6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1DD000BA0
0BB0
0FB0
0BF0
0BG0
0BH0
SIMATIC S7-mEC, S7-mEC,
EC31
EC31-RTX
S7-mEC,
EC31-RTX F
S7-mEC,
EC31-HMI/RTX
128PT
S7-mEC,
EC31-HMI/RTX
512PT
S7-mEC,
EC31-HMI/RTX
2048PT
5 ms
5 ms
5 ms
5 ms
5 ms
5 ms
34 W
34 W
34 W
34 W
34 W
34 W
256 KB non-volatile memory for
retentive data
512 KB non-volatile memory for
retentive data
512 KB non-volatile memory for
retentive data
512 KB non-volatile memory for
retentive data
512 KB non-volatile memory for
retentive data
512 KB non-volatile memory for
retentive data
• Number, max.
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
• Size, max.
64 Kibyte
64 Kibyte
64 Kibyte
64 Kibyte
64 Kibyte
• Number, max.
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
• Size, max.
64 Kibyte
64 Kibyte
64 Kibyte
64 Kibyte
64 Kibyte
• Number, max.
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
• Size, max.
64 Kibyte
64 Kibyte
64 Kibyte
64 Kibyte
64 Kibyte
• Number, max.
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
• Size, max.
64 Kibyte
64 Kibyte
64 Kibyte
64 Kibyte
64 Kibyte
• Number of free cycle OBs
1; OB 1
1; OB 1
1; OB 1
1; OB 1
1; OB 1
• Number of time alarm OBs
1; OB 10
1; OB 10
1; OB 10
1; OB 10
1; OB 10
• Number of delay alarm OBs
1; OB 20
1; OB 20
1; OB 20
1; OB 20
1; OB 20
• Number of watchdog
interrupts
9; OB 30-38
9; OB 30-38
9; OB 30-38
9; OB 30-38
9; OB 30-38
• Number of process alarm
OBs
1; OB 40
1; OB 40
1; OB 40
1; OB 40
1; OB 40
• Number of startup OBs
2; OB 100, 102
2; OB 100, 102
2; OB 100, 102
2; OB 100, 102
2; OB 100, 102
• Number of asynchronous
error OBs
7; OB 80, 82-85,
86, 88
7; OB 80, 82-85,
86, 88
7; OB 80, 82-85,
86, 88
7; OB 80, 82-85,
86, 88
7; OB 80, 82-85,
86, 88
• Number of synchronous
error OBs
2; OB 121, 122
2; OB 121, 122
2; OB 121, 122
2; OB 121, 122
2; OB 121, 122
• per priority class
24
24
24
24
24
• additional within an error
OB
24
24
24
24
24
Product type designation
Supply voltages
Mains buffering
• Mains buffering
Power loss
Power loss, typ.
Memory
Memory type
CPU/ blocks
DB
FB
FC
9
OB
Nesting depth
Siemens ST 70 N · 2010
9/3
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC S7 modular embedded controller
■ Technical specifications (continued)
6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1FD00- 6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1DD000BA0
0BB0
0FB0
0BF0
0BG0
0BH0
Product type designation
SIMATIC S7-mEC, S7-mEC,
EC31
EC31-RTX
S7-mEC,
EC31-RTX F
S7-mEC,
EC31-HMI/RTX
128PT
S7-mEC,
EC31-HMI/RTX
512PT
S7-mEC,
EC31-HMI/RTX
2048PT
CPU/ processing times
for bit operations, min.
0.004 µs; typ.
0.004 µs; typ.
0.004 µs; typ.
0.004 µs; typ.
0.004 µs; typ.
for fixed point arithmetic,
min.
0.003 µs; typ.
0.003 µs; typ.
0.003 µs; typ.
0.003 µs; typ.
0.003 µs; typ.
for floating point arithmetic,
min.
0.004 µs; typ.
0.004 µs; typ.
0.004 µs; typ.
0.004 µs; typ.
0.004 µs; typ.
• Number
2 048
2 048
2 048
2 048
2 048
• Retentivity
- can be set
- lower limit
- upper limit
- preset
Yes
0
2 047
8
Yes
0
2 047
8
Yes
0
2 047
8
Yes
0
2 047
8
Yes
0
2 047
8
• Counting range
- can be set
- lower limit
- upper limit
Yes
0
999
Yes
0
999
Yes
0
999
Yes
0
999
Yes
0
999
• present
Yes
Yes
Yes
Yes
Yes
• Type
SFB
SFB
SFB
SFB
SFB
• Number
2 048
2 048
2 048
2 048
2 048
• Retentivity
- can be set
- lower limit
- upper limit
Yes
0
2 047
Yes
0
2 047
Yes
0
2 047
Yes
0
2 047
Yes
0
2 047
• Time range
- lower limit
- upper limit
10 ms
9 990 s
10 ms
9 990 s
10 ms
9 990 s
10 ms
9 990 s
10 ms
9 990 s
• present
Yes
Yes
Yes
Yes
Yes
• Type
SFB
SFB
SFB
SFB
SFB
512 KB
512 KB
512 KB
512 KB
512 KB
• Number, max.
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
• of which retentive without
battery
MB 0 to MB 16383 MB 0 to MB 16383 MB 0 to MB 16383 MB 0 to MB 16383 MB 0 to MB 16383
• Retentivity preset
MB 0 to MB 15
MB 0 to MB 15
MB 0 to MB 15
MB 0 to MB 15
MB 0 to MB 15
• Number of clock memories
8
8
8
8
8
• Number, max.
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
Max. code size
and max. data
size: 4 MB each
• Size, max.
64 Kibyte
64 Kibyte
64 Kibyte
64 Kibyte
64 Kibyte
Times/counters and their
retentivity
S7 counter
IEC counter
S7 times
9
IEC timer
Data areas and their
retentivity
retentive data area, total
Flag
Data blocks
9/4
Siemens ST 70 N · 2010
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC S7 modular embedded controller
■ Technical specifications (continued)
6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1FD00- 6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1DD000BA0
0BB0
0FB0
0BF0
0BG0
0BH0
Product type designation
SIMATIC S7-mEC, S7-mEC,
EC31
EC31-RTX
S7-mEC,
EC31-RTX F
S7-mEC,
EC31-HMI/RTX
128PT
S7-mEC,
EC31-HMI/RTX
512PT
S7-mEC,
EC31-HMI/RTX
2048PT
Address area
I/O address area
• overall
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
• Outputs
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
• of which, distributed
- Inputs
- Outputs
8 Kibyte
8 Kibyte
8 Kibyte
8 Kibyte
8 Kibyte
8 Kibyte
8 Kibyte
8 Kibyte
8 Kibyte
8 Kibyte
• Inputs, adjustable
16 Kibyte
16 Kibyte
8 Kibyte
8 Kibyte
8 Kibyte
• Outputs, adjustable
16 Kibyte
16 Kibyte
8 Kibyte
8 Kibyte
8 Kibyte
• Inputs, default
512 byte
512 byte
512 byte
512 byte
512 byte
• Outputs, default
512 byte
512 byte
512 byte
512 byte
512 byte
15
15
15
15
15
• Inputs
128 000
128 000
128 000
128 000
128 000
• Outputs
128 000
128 000
128 000
128 000
128 000
• Inputs
8 000
8 000
8 000
8 000
8 000
• Outputs
8 000
8 000
8 000
8 000
8 000
Yes;
Resolution: 1 s
Yes;
Resolution: 1 s
Yes;
Resolution: 1 s
Yes;
Resolution: 1 s
Yes;
Resolution: 1 s
• supported
Yes
Yes
Yes
Yes
Yes
• on Ethernet via NTP
Yes
Yes
Yes
Yes
Yes
Number of login stations for
message functions, max.
62; The alarm
functions cannot
currently be used
for central bus
modules
62; The alarm
functions cannot
currently be used
for central bus
modules
62; The alarm
functions cannot
currently be used
for central bus
modules
62; The alarm
functions cannot
currently be used
for central bus
modules
62; The alarm
functions cannot
currently be used
for central bus
modules
Process diagnostic
messages
Yes; Alarm_S
Yes; Alarm_S
Yes; Alarm_S
Yes; Alarm_S
Yes; Alarm_S
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Process image
Subprocess images
• Number of subprocess
images, max.
Digital channels
Analog channels
Time of day
Clock
• Hardware clock
(real-time clock)
Clock synchronization
S7 message functions
Test commissioning
functions
Status/control
• Status/control variable
Forcing
• Forcing
Diagnostic buffer
• present
Monitoring functions
Status LEDs
Communication functions
PG/OP communication
Global data communication
• supported
Siemens ST 70 N · 2010
9/5
9
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC S7 modular embedded controller
■ Technical specifications (continued)
6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1FD00- 6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1DD000BA0
0BB0
0FB0
0BF0
0BG0
0BH0
S7-mEC,
EC31-RTX F
S7-mEC,
EC31-HMI/RTX
128PT
S7-mEC,
EC31-HMI/RTX
512PT
S7-mEC,
EC31-HMI/RTX
2048PT
No
No
No
No
No
• supported
Yes
Yes
Yes
Yes
Yes
• as server
Yes
Yes
Yes
Yes
Yes
• as client
Yes
Yes
Yes
Yes
Yes
Yes; Via integrated PROFINET
interface (X1) and
loadable FBs
32
Yes; Via integrated PROFINET
interface and
loadable FBs
32
Yes; Via integrated PROFINET
interface (X1) and
loadable FBs
32
Yes; Via integrated PROFINET
interface (X1) and
loadable FBs
32
Yes; Via integrated PROFINET
interface (X1) and
loadable FBs
32
Product type designation
SIMATIC S7-mEC, S7-mEC,
EC31
EC31-RTX
S7 basic communication
• supported
S7 communication
Open IE communication
• TCP/IP
- Number of connections,
max.
- Data length, max.
8 192 byte
8 192 byte
8 192 byte
• ISO-on-TCP (RFC1006)
No
No
No
No
No
• UDP
Yes; Via integrated PROFINET
interface (X1) and
loadable FBs
32
Yes; Via integrated PROFINET
interface and
loadable FBs
32
Yes; Via integrated PROFINET
interface (X1) and
loadable FBs
32
Yes; Via integrated PROFINET
interface (X1) and
loadable FBs
32
Yes; Via integrated PROFINET
interface (X1) and
loadable FBs
32
1 472 byte
1 472 byte
1 472 byte
- Number of connections,
max.
- Data length, max.
8 192 byte
1 472 byte
Number of connections
• overall
9
64
64
64
64
64
1
1
1
1
1
1
1
1
1
1
Type of interface
PROFINET
PROFINET
PROFINET
PROFINET
PROFINET
Physics
2x RJ45
2x RJ45
2x RJ45
2x RJ45
2x RJ45
automatic detection of
transmission speed
Yes
Yes
Yes
Yes
Yes
Autonegotiation
Yes
Yes
Yes
Yes
Yes
Autocrossing
Yes
Yes
Yes
Yes
Yes
Number of connection
resources
32
32
32
32
32
• MPI
No
No
No
No
No
• DP master
No
No
No
No
No
• DP slave
No
No
No
No
No
• PROFINET IO Device
No
No
No
No
No
• PROFINET IO Controller
Yes
Yes
Yes
Yes
Yes
• PROFINET CBA
Yes
Yes
Yes
Yes
Yes
• Open IE communication
Yes
Yes
Yes
Yes
Yes
• Point-to-point connection
No
No
No
No
No
• usable for
PG communication
- reserved for
PG communication
• usable for
OP communication
- reserved for
OP communication
1st interface
Functionality
9/6
Siemens ST 70 N · 2010
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC S7 modular embedded controller
■ Technical specifications (continued)
6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1FD00- 6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1DD000BA0
0BB0
0FB0
0BF0
0BG0
0BH0
S7-mEC,
EC31-RTX F
S7-mEC,
EC31-HMI/RTX
128PT
S7-mEC,
EC31-HMI/RTX
512PT
S7-mEC,
EC31-HMI/RTX
2048PT
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
• Total number of connectable IO Devices, max.
256
256
256
256
256
• Number of IO Devices
with IRT and the option
"high flexibility", max.
64
64
64
64
64
• IRT, supported
Yes
Yes
Yes
Yes
Yes
• Prioritized startup
supported
- Number of IO Devices,
max.
Yes
Yes
Yes
Yes
Yes
32
32
32
32
32
• Activation/deactivation of
IO Devices
- Number of IO Devices
that can be simultaneously activated/deactivated,
max.
Yes
Yes
Yes
Yes
Yes
8
8
8
8
8
• IO Devices changing
during operation
(partner ports), supported
- Max. number of
IO devices per tool
- Send cycles
Yes
Yes
Yes
Yes
Yes
8
8
8
8
8
Setting options:
250 µs, 500 µs
and 1 ms
250 µs ... 128 ms
(for 250 µs send
cycle);
500 µs ... 256 ms
(for 500 µs send
cycle);
1 ms ... 512 ms
(for 1 ms send
cycle);
Setting options:
250 µs, 500 µs
and 1 ms
250 µs ... 128 ms
(for 250 µs send
cycle);
500 µs ... 256 ms
(for 500 µs send
cycle);
1 ms ... 512 ms
(for 1 ms send
cycle);
Setting options:
250 µs, 500 µs
and 1 ms
250 µs ... 128 ms
(for 250 µs send
cycle);
500 µs ... 256 ms
(for 500 µs send
cycle);
1 ms ... 512 ms
(for 1 ms send
cycle);
Setting options:
250 µs, 500 µs
and 1 ms
250 µs ... 128 ms
(for 250 µs send
cycle);
500 µs ... 256 ms
(for 500 µs send
cycle);
1 ms ... 512 ms
(for 1 ms send
cycle);
Setting options:
250 µs, 500 µs
and 1 ms
250 µs ... 128 ms
(for 250 µs send
cycle);
500 µs ... 256 ms
(for 500 µs send
cycle);
1 ms ... 512 ms
(for 1 ms send
cycle);
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
16 Kibyte
2 Kibyte
2 Kibyte
2 Kibyte
2 Kibyte
2 Kibyte
256 byte
256 byte
256 byte
256 byte
256 byte
• acyclic transmission
Yes
Yes
Yes
Yes
Yes
• cyclic transmission
Yes
Yes
Yes
Yes
Yes
• Open IE communication,
supported
Yes
Yes
Yes
Yes
Yes
• Number of connections,
max.
32
32
32
32
32
• Local port numbers used at
the system end
0, 20, 21, 23, 25,
80, 102, 135, 161,
8 080, 34 962,
34 963, 34 964,
65 532, 65 533,
65 534, 65 535
0, 20, 21, 23, 25,
80, 102, 135, 161,
8 080, 34962,
34 963, 34 964,
65 532, 65 533,
65 534, 65 535
0, 20, 21, 23, 25,
80, 102, 135, 161,
8 080, 34 962,
34 963, 34 964,
65 532, 65 533,
65 534, 65 535
0, 20, 21, 23, 25,
80, 102, 135, 161,
8 080, 34 962,
34 963, 34 964,
65 532, 65 533,
65 534, 65 535
0, 20, 21, 23, 25,
80, 102, 135, 161,
8 080, 34 962,
34 963, 34 964,
65 532, 65 533,
65 534, 65 535
Product type designation
SIMATIC S7-mEC, S7-mEC,
EC31
EC31-RTX
PROFINET IO Controller
• Services
- PG/OP communication
- S7 routing
- S7 communication
- Isochronous mode
- Refresh times
• Address area
- Inputs, max.
- Outputs, max.
• User data per address
area, max.
- User data consistency,
max.
PROFINET CBA
Open IE communication
Siemens ST 70 N · 2010
9/7
9
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC S7 modular embedded controller
■ Technical specifications (continued)
6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1FD00- 6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1DD000BA0
0BB0
0FB0
0BF0
0BG0
0BH0
Product type designation
SIMATIC S7-mEC, S7-mEC,
EC31
EC31-RTX
S7-mEC,
EC31-RTX F
S7-mEC,
EC31-HMI/RTX
128PT
S7-mEC,
EC31-HMI/RTX
512PT
S7-mEC,
EC31-HMI/RTX
2048PT
PROFINET functions
• Recognition of the accessible stations, supported
Yes; DCP
Yes; DCP
Yes; DCP
Yes; DCP
Yes; DCP
• Assignment of the
IP address, supported
Yes; DCP
Yes; DCP
Yes; DCP
Yes; DCP
Yes; DCP
• Assignment of the device
name, supported
Yes; DCP
Yes; DCP
Yes; DCP
Yes; DCP
Yes; DCP
• Topology recognition,
supported
Yes; LLDP, LLDP
MIB, SNMP
Yes; LLDP, LLDP
MIB, SNMP
Yes; LLDP, LLDP
MIB, SNMP
Yes; LLDP, LLDP
MIB, SNMP
Yes; LLDP, LLDP
MIB, SNMP
• Extended network
diagnostics with Standard
MIB II, supported
Yes; Standard
MIB II, SNMP
Yes; Standard
MIB II, SNMP
Yes; Standard
MIB II, SNMP
Yes; Standard
MIB II, SNMP
Yes; Standard
MIB II, SNMP
2nd interface
Type of interface
Integrated
Integrated
Integrated
Integrated
Integrated
Ethernet interface Ethernet interface Ethernet interface Ethernet interface Ethernet interface
Physics
Ethernet RJ45
Ethernet RJ45
Ethernet RJ45
Ethernet RJ45
Ethernet RJ45
automatic detection of
transmission speed
Yes
Yes
Yes
Yes
Yes
Autonegotiation
Yes
Yes
Yes
Yes
Yes
Autocrossing
No
No
No
No
No
Number of connection
resources
32
32
32
32
32
• PROFINET IO Controller
No
No
No
No
No
• PROFINET IO Device
No
No
No
No
No
• PROFINET CBA
No
No
No
No
No
• PROFINET CBA-SRT
No
No
No
No
No
Yes; V5.4 SP4
or higher
+ HW update/
iMap V3.0 SP1
Yes; STEP7 V5.4
SP5 or higher
+ HSP135 as
basic requirement for the
HSP178 for
WinAC RTX F
2009 on Embedded Controller /
iMap V3.0 SP1
Yes; V5.4 SP4
or higher
+ HW update/
iMap V3.0 SP1
Yes; V5.4 SP4
or higher
+ HW update/
iMap V3.0 SP1
Yes; V5.4 SP4
or higher
+ HW update/
iMap V3.0 SP1
• STEP 7
Yes
Yes; V5.4 SP5
Yes
Yes
Yes
• LAD
Yes
Yes
Yes
Yes
Yes
• FBD
Yes
Yes
Yes
Yes
Yes
• STL
Yes
Yes
Yes
Yes
Yes
• SCL
Yes
Yes
Yes
Yes
Yes
• CFC
Yes
Yes
Yes
Yes
Yes
• GRAPH
Yes
Yes
Yes
Yes
Yes
• HiGraph®
Yes
Yes
Yes
Yes
Yes
Functionality
9
CPU/ programming
Configuration software
• STEP 7
Programming language
Installed software
Visualization
9/8
WinCC flexible RT WinCC flexible RT WinCC flexible RT
2008
2008
2008
Siemens ST 70 N · 2010
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC S7 modular embedded controller
■ Technical specifications (continued)
6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1FD00- 6ES7 677-1DD00- 6ES7 677-1DD00- 6ES7 677-1DD000BA0
0BB0
0FB0
0BF0
0BG0
0BH0
Product type designation
SIMATIC S7-mEC, S7-mEC,
EC31
EC31-RTX
S7-mEC,
EC31-RTX F
S7-mEC,
EC31-HMI/RTX
128PT
S7-mEC,
EC31-HMI/RTX
512PT
S7-mEC,
EC31-HMI/RTX
2048PT
Control
SIMATIC WinAC
RTX 2009
SIMATIC WinAC
RTX F 2009
SIMATIC WinAC
RTX 2009
SIMATIC WinAC
RTX 2009
SIMATIC WinAC
RTX 2009
Communication
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
• Min.
0 °C
0 °C
0 °C
0 °C
0 °C
0 °C
• max.
50 °C
50 °C
50 °C
50 °C
50 °C
50 °C
• Min.
-40 °C
-40 °C
-40 °C
-40 °C
-40 °C
-40 °C
• max.
70 °C
70 °C
70 °C
70 °C
70 °C
70 °C
• Operation, checked according to IEC 60068-2-6
Yes
Yes
Yes
Yes
Yes
Yes
• Transport tested checked
to IEC 60068-2-6
Yes
Yes
Yes
Yes
Yes
Yes
• checked according to
IEC 60068-2-27
Yes
Yes
Yes
Yes
Yes
Yes
• checked according to
IEC 60068-2-29
Yes
Yes
Yes
Yes
Yes
Yes
• checked according to
IEC 60068-2-29
Yes
Yes
Yes
Yes
Yes
Yes
• Operation,
checked according to
IEC 60068-2-29
Operation,
checked acc. to
IEC 60068-2-27
Operation,
checked acc. to
IEC 60068-2-27
Operation,
checked acc. to
IEC 60068-2-27
Operation,
checked acc. to
IEC 60068-2-27
Operation,
checked acc. to
IEC 60068-2-27
Operation,
checked acc. to
IEC 60068-2-27
• Storage/transport,
checked to
IEC 60068-2-29
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
CE mark
Yes
Yes
Yes
Yes
Yes
Yes
CSA approval
Yes; included in
cULus
Yes; included in
cULus
Yes; included in
cULus
Yes; included in
cULus
Yes; included in
cULus
Yes; included in
cULus
C-TICK
Yes
Yes
Yes
Yes
Yes
Yes
cULus
Yes
Yes
Yes
Yes
Yes
Yes
FM approval
Yes
Yes
Yes
Yes
Yes
Yes
• Width
160 mm
160 mm
160 mm
160 mm
160 mm
160 mm
• Height
125 mm
125 mm
125 mm
125 mm
125 mm
125 mm
• Depth
115 mm
115 mm
115 mm
115 mm
115 mm
115 mm
1.5 kg; Approx.
1.5 kg; Approx.
1.5 kg; Approx.
1.5 kg; Approx.
1.5 kg; Approx.
1.5 kg; Approx.
EMC
Emission of radio interference acc. to EN 55 011
• Limit class A, for use in
industrial environments
Environmental
requirements
Operating temperature
Storage/
transport temperature
Vibrations
Shock test
9
Shock testing
Degree of protection
IP20
Standards, approvals,
certificates
Dimensions and weight
Dimensions
Weight
• Weight
Siemens ST 70 N · 2010
9/9
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC S7 modular embedded controller
■ Technical specifications (continued)
Product type designation
6ES7 677-1DD401AA0
6ES7 677-1DD502AA0
EM PCI-104
EM PC
01
01
Power supply
Input voltage
EM PCI-104
EM PC
• checked according to
IEC 60068-2-27
Yes
Yes
• checked according to
IEC 60068-2-29
Yes
Yes
Product type designation
• Rated value, 24 V DC
Yes; Optional:
external infeed
Shock testing
• permissible range,
lower limit (DC)
20.4 V
• checked according to
IEC 60068-2-29
Yes
Yes
• permissible range,
upper limit (DC)
28.8 V
• Operation, checked acc. to Yes
IEC 60068-2-29
Yes
• Storage/transport, checked Yes
to IEC 60068-2-29
Yes
Current consumption
from expansion bus
100 mA
580 mA
Degree of protection
14 W
Standards, approvals,
certificates
Power loss
IP20
Power loss, max.
Power loss, typ.
2.4 W;
Without inserted
PCI-104 cards
9W
Interrupts/diagnostics/
status information
Diagnoses
• Diagnostic functions
Yes; POWER LED,
status LED
Yes; POWER LED,
CARD LED for
indicating access
to SD/MMC
EMC
9
6ES7 677-1DD502AA0
Shock test
Product version
Hardware product version
6ES7 677-1DD401AA0
Yes
Yes
Environmental
requirements
Operating temperature
CE mark
Yes
Yes
Yes
Yes
C-TICK
Yes
Yes
cULus
Yes
Yes
FM approval
Yes
Yes
• Width
120 mm;
Without bus
connector
Extension-Bus
80 mm;
Without bus
connector Extension-Bus
• Height
125 mm; Without
125 mm
external voltage
connecting terminal
• Depth
115 mm
115 mm
0.5 kg
0.4 kg
Dimensions and weight
Dimensions
Weight
• Min.
0 °C
0 °C
• max.
50 °C
50 °C
• Min.
-40 °C
-40 °C
• max.
70 °C
70 °C
Storage/transport
temperature
Vibrations
• Operation, checked acc. to Yes
IEC 60068-2-6
Yes
Yes
Yes
• Transport tested checked
to IEC 60068-2-6
9/10
Yes
CSA approval
Emission of radio interference acc. to EN 55 011
• Limit class A, for use in
industrial environments
Yes
Siemens ST 70 N · 2010
• Weight
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC S7 modular embedded controller
■ Ordering data
Order No.
EC31
E
6ES7 677-1DD00-0BA0
Intel CoreDuo 1.2 GHz processor
Memory configuration:
1 GB RAM, 2 GB Flash Disk;
interfaces:
1 Industrial Ethernet port,
2 PROFINET ports,
2 USB ports,
1 slot for multimedia card;
Software:
Windows XP embedded preinstalled, Software Development Kit
(SDK) for creating C/C++ applications with accesses to central
I/O modules
EC31-RTX
EC31-HMI/RTX
Intel CoreDuo 1.2 GHz processor
Memory configuration:
1 GB RAM, 2 GB Flash Disk;
interfaces:
1 Industrial Ethernet port,
2 PROFINET ports,
2 USB ports,
1 slot for multimedia card;
Software:
Windows XP embedded,
WinAC RTX 2009,
SIMATIC SOFTNET-S7/V7.0 Lean
preinstalled
E
6ES7 677-1DD00-0BB0
Intel CoreDuo 1.2 GHz processor
Memory configuration:
1 GB RAM, 2 GB Flash Disk;
interfaces:
1 Industrial Ethernet port,
2 PROFINET ports,
2 USB ports,
1 slot for multimedia card;
Software:
Windows XP embedded and
WinAC RTX 2009 preinstalled
EC31-RTX F
Order No.
SIMATIC S7-modular
Embedded Controller
SIMATIC S7-modular
Embedded Controller
• With WinCC flexible 2008 RT
128 PT
E
6ES7 677-1DD00-0BF0
• With WinCC flexible 2008 RT
512 PT
E
6ES7 677-1DD00-0BG0
• With WinCC flexible 2008 RT
2048 PT
E
6ES7 677-1DD00-0BH0
EM PCI-104 extension module C
6ES7 677-1DD40-1AA0
For fitting up to 3 additional
PCI-104 cards
EM PC extension module
E
6ES7 677-1FD00-0FB0
Intel CoreDuo 1.2 GHz processor
Memory configuration:
1 GB RAM, 2 GB Flash Disk;
interfaces:
1 Industrial Ethernet port,
2 PROFINET ports,
2 USB ports,
1 slot for multimedia card;
Software:
Windows XP embedded and
WinAC RTX F 2009 preinstalled
C: Subject to export regulations: AL: N and ECCN: EAR99H
C
6ES7 677-1DD50-2AA0
Additional connection options:
2 USB interfaces,
1 Gigabit Ethernet interface,
1 serial interface,
1 slot for CF card,
1 slot for SD card/Micro Memory
Card
9
E: Subject to export regulations: AL: N and ECCN: 5D002ENC3
Siemens ST 70 N · 2010
9/11
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC IPC427C bundles
■ Overview
■ Ordering data
Order No.
SIMATIC IPC427C bundles
Preferred version with SIMATIC WinAC RTX F 2009
(Replacement hardware unit
available in exchange)
SIMATIC IPC427C bundle with E
WinAC RTX F 2009
6ES7 675-1DK30-0EP0
Processor Core2Duo, 1.2 GHz,
2x PROFINET (IE),
1x PROFIBUS, 2 GB RAM,
8 GB CompactFlash
Preferred versions with SIMATIC WinAC RTX 2009 and
WinCC flexible 2008
(Replacement hardware unit
available in exchange)
SIMATIC IPC427C bundles
E
6ES7 675-1D 7 7 0- 7 7 7 0
Processor
9
• Quick start in automation solutions with embedded PC
platforms.
- SIMATIC WinAC RTX or SIMATIC WinAC RTX F preinstalled
on SIMATIC IPC427C ready for switch-on
- PROFINET, PROFIBUS and Industrial Ethernet prepared for
use in a SIMATIC environment
- Optional WinCC flexible for visualization tasks in parallel with
SIMATIC WinAC RTX.
- Configuration and programming with SIMATIC STEP 7 via
Industrial Ethernet, PROFINET, or PROFIBUS
• Safety requirements up to SIL 3 according to IEC 61508/
62061 or according to EN ISO 13849-1 up to PL e can be implemented with WinAC RTX F.
• Rugged operation
- Operation without a hard disk, based on Compact Flash
Card (CF Card) or Solid State Disk and Windows Embedded
Standard
- Operation without a fan
- 128 KB retentive data for WinAC RTX, also without uninterruptible power supply (UPS)
• Flexibility of a PC-based automation environment
- Free memory space on CF Card can be used for other PC
applications
- Use of WinAC ODK with SIMATIC WinAC RTX or SIMATIC
WinAC RTX F (read-only for fail-safe program part)
- Connection option for USB devices, flat panel monitor or
screen
- PCI 104 cards can be plugged in
• High-performance service concept
- Replacement parts for preferred types available in exchange, ex stock
New
• New hardware basis SIMATIC IPC427C
• Cost-effective variants with PROFINET, based on the standard
Ethernet interface
• Current product versions of the pre-installed software:
- SIMATIC WinAC RTX 2009 or SIMATIC WinAC RTX F
- SIMATIC WinCC flexible 2008 SP1 (WinAC RTX 2009 only)
- SIMATIC NET Edition 2008
• Celeron M, 1.2 GHz,
2x PROFINET (IE)
A
• Celeron M, 1.2 GHz,
2x PROFINET (IE),
1x PROFIBUS
B
• Core2Solo, 1.2 GHz,
2x PROFINET (IE)
E
• Core2Solo, 1.2 GHz,
2x PROFINET (IE),
1x PROFIBUS
F
• Core2Duo, 1.2 GHz,
2x PROFINET (IE)
J
• Core2Duo, 1.2 GHz,
2x PROFINET (IE),
1x PROFIBUS
K
Main memory
• 2 GB RAM
3
Internal mass storage
• Without
0
Externally accessible mass
storage
• 4 GB CompactFlash,
Windows Embedded 2009 and
preinstalled software
D
• 8 GB CompactFlash,
Windows Embedded 2009 and
preinstalled software
E
Software configurations
• WinAC RTX
B
• WinCC flexible RT 128 PT
C
• WinCC flexible RT 512 PT
D
• WinCC flexible RT 2048 PT
E
• WinCC flexible RT 4096 PT
F
• WinAC RTX, WinCC flexible RT
128 PT
K
• WinAC RTX, WinCC flexible RT
512 PT
L
• WinAC RTX, WinCC flexible RT
2048 PT
M
• WinAC RTX, WinCC flexible RT
4096 PT
N
E: Subject to export regulations: AL: N and ECCN: 5D002ENC3
9/12
Siemens ST 70 N · 2010
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC IPC427C bundles
■ Ordering data
Order No.
Order No.
SIMATIC IPC427C bundles
Delivery versions (ex stock)
All versions with
SIMATIC WinAC RTX 2009 and WinCC flexible 2008
(Replacement hardware units
available in exchange)
(Hardware: repair only is possible)
SIMATIC IPC427C bundle with
WinAC RTX 2009
SIMATIC IPC427C bundles
E
6ES7 675-1D 7 7 0- 7 7 7 0
Processor
• Celeron M, 1.2 GHz,
2x PROFINET (IE)
A
• Celeron M, 1.2 GHz, 2x PROFINET (IE), 1x PROFIBUS
B
• Core2Solo, 1.2 GHz,
2x PROFINET (IE)
E
• Core2Solo, 1.2 GHz, 2x PROFINET (IE), 1x PROFIBUS
F
• Core2Duo, 1.2 GHz,
2x PROFINET (IE)
J
• Core2Duo, 1.2 GHz, 2x PROFINET (IE), 1x PROFIBUS
K
Processor Core2Solo, 1.2 GHz,
2x PROFINET (IE),
1x PROFIBUS, 2 GB RAM,
4 GB CompactFlash
E
6ES7 675-1DF30-0DB0
Processor Core2Duo, 1.2 GHz,
2x PROFINET (IE),
1x PROFIBUS, 2 GB RAM,
4 GB CompactFlash
E
6ES7 675-1DK30-0DB0
Processor Core2Duo, 1.2 GHz,
2x PROFINET (IE),
1x PROFIBUS, 2 GB RAM,
8 GB CompactFlash
E
6ES7 675-1DK30-0EP0
E
6ES7 675-1DK30-0DL0
C
6GK1 560-3AU00
SIMATIC IPC427C bundle with
WinAC RTX 2009 and
WinCC flexible 2008 512 PT
• 1 GB RAM
2
Processor Core2Duo, 1.2 GHz,
2x PROFINET (IE),
1x PROFIBUS, 2 GB RAM,
4 GB CompactFlash
• 2 GB RAM
3
Accessories
• 4 GB RAM
4
Main memory
CP 5603 Microbox Package
Internal mass storage
• None (can only be ordered with
externally accessible mass
storage)
0
• 80 GB HDD SATA, also with
externally accessible CF
1
• 32 GB Solid State Disk SATA,
Windows Embedded 2009 and
preinstalled software
2
• 4 GB internal CompactFlash,
Windows Embedded 2009 and
preinstalled software
6
• 8 GB internal CompactFlash,
Windows Embedded 2009 and
preinstalled software
7
Package for using the PROFIBUS
CP 5603 in Microbox PCs;
comprising a CP 5603 module
and a Microbox expansion rack
CP 1604 Microbox Package
Expansion kit PC/104
9
C
6AG4 070-0BA00-0XA0
4 GB
C
6ES7 648-2BF02-0XG0
8 GB
C
6ES7 648-2BF02-0XH0
Expansion rack incl. mounting
hardware; 6 items
CompactFlash Cards
Extern. accessible mass storage
• None (can only be ordered with
internal mass storage)
A
• 4 GB CompactFlash,
Windows Embedded 2009 and
preinstalled software
D
• 8 GB CompactFlash,
Windows Embedded 2009 and
preinstalled software
E
SIMATIC PC keyboard
German/international,
USB connection
Software configurations
C
6ES7 648-0CD00-0YA0
SIMATIC PC USB mouse
C
6ES7 790-0AA01-0XA0
C
6ES7 648-0DC40-0AA0
C
6ES7 648-1AA20-0YB0
B
• WinCC flexible RT 128 PT
C
• WinCC flexible RT 512 PT
D
SIMATIC PC USB flash drive
• WinCC flexible RT 2048 PT
E
• WinCC flexible RT 4096 PT
F
2 GB, USB 2.0, incl. SIMATIC PC
BIOS manager, bootable, metal
enclosure
• WinAC RTX, WinCC flexible RT
128 PT
K
• WinAC RTX, WinCC flexible RT
512 PT
L
• WinAC RTX, WinCC flexible RT
2048 PT
M
• WinAC RTX, WinCC flexible RT
4096 PT
N
6ES7 648-0CB00-0YA0
German/International,
USB connection, with 4-way
USB HUB
• WinAC RTX
C: Subject to export regulations: AL: N and ECCN: EAR99H
6GK1 160-4AU00
Package for using the PROFINET
CP 1604 in Microbox PCs;
comprising CP 1604, connection
board, power supply and expansion rack for Microbox PC; implemented with Development Kit
DK-16xx PN IO; NCM P
Optical, 3 buttons,
with PS/2 adapter
Book mounting kit
Interfaces at the front
E: Subject to export regulations: AL: N and ECCN: 5D002ENC3
Siemens ST 70 N · 2010
9/13
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC HMI IPC477C embedded
■ Overview
Embedded PC platform with extremely high industrial compatibility for demanding tasks in the field of PC-based automation
• Maintenance-free (no rotating components such as fan and
hard disk)
• Rugged construction: The PC is resistant to the harshest
mechanical stress and is extremely reliable in operation
• Compact design (only 61-69 mm mounting depth for 12"-19")
• High degree of investment protection
• Fast integration capability
• Front panel versions:
- 12" and 15" TFT Touch
- 12" and 15" TFT Keys
- 19" Touch
■ Technical specifications
6AV7 884..
6AV7 883..PRO
Processors
Intel Celeron M 1.2 GHz, Intel Core2Solo 1.2 GHz or
Core2Duo 1.2 GHz
Intel Celeron M 1.2 GHz, Intel Core2Solo 1.2 GHz or
Core2Duo 1.2 GHz
Memory type
DDR3-RAM
DDR3-RAM
Main memory
1 GB, 2 GB or 4 GB
1 GB, 2 GB or 4 GB
Free slots
1 x CF card slot (externally accessible)
1 x CF card slot (externally accessible)
Operating system
Windows Embedded Standard 2009 (EN/DE) or
Windows XP Professional Multi-Language
Windows Embedded Standard 2009 (EN/DE) or
Windows XP Professional Multi-Language
Additional OS information
Language: EN/DE
Language: EN/DE
SIMATIC Software
Optionally with preinstalled bundle software
SIMATIC WinCC flexible 2008 SP1 and/or
WinAC RTX 2009 SIMATIC WinAC RTX F
SIMATIC WinCC as web client or single-user station
Optionally with preinstalled bundle software
SIMATIC WinCC flexible 2008 SP1 and/or
WinAC RTX 2009 SIMATIC WinAC RTX F
Floppy drive
Optional via external USB floppy drive
Optional via external USB floppy drive
Optical drives
Possible as external drive via USB
Possible as external drive via USB
Hard disk/mass storage
Compact Flash drive with 2, 4, or 8 GB
and/or SSD (Solid State Disk) with 32 GB
Compact Flash drive with 2, 4, or 8 GB
and/or SSD (Solid State Disk) with 32 GB
Graphics interface
DVI-I for additional display unit: Color depth 32 bits
DVI-I for additional display unit: Color depth 32 bits
Connection for keyboard/mouse
USB / USB
USB / USB
Serial interface
COM1: 1 x V.24 (RS232)
COM1: 1 x V.24 (RS232)
PROFIBUS/MPI
Optionally onboard, isolated, max. 12 Mbit/s, no plug-in
card required, CP5611-compatible, not upgradable
Optionally onboard, isolated, max. 12 Mbit/s, no plug-in
card required, CP5611-compatible, not upgradable
PROFINET (RT/IRT)
Optional: 3 x RJ45, CP1616-compatible; not upgradable
Optional: 3 x RJ45, CP1616-compatible; not upgradable
USB
1 x on front, 4 x on rear, USB 2.0 (500 mA)
1 x on front, 4 x on rear, USB 2.0 (500 mA)
PROFINET (IE), Ethernet
onboard, 2 x 10/100/1000 Mbit (RJ45 with/without
onboard, 2 x 10/100/1000 Mbit (RJ45 with/without
PROFIBUS), 1 x 10/100/1000 Mbit (RJ45 with PROFINET), PROFIBUS), 1 x 10/100/1000 Mbit (RJ45 with PROFINET),
no plug-in card required
no plug-in card required
Multimedia
No
No
24 V DC
24 V DC
Temperature
Yes
Yes
Watchdog
Yes
Yes
General features
9
Drives
Interfaces
Supply voltage
Supply voltage
Monitoring functions
9/14
Siemens ST 70 N · 2010
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC HMI IPC477C embedded
■ Technical specifications (continued)
6AV7 884..
6AV7 883..PRO
DiagBit
(similar to S.M.A.R.T.)
Yes (for CF cards and SSD)
Yes (for CF cards and SSD)
Status LEDs
Yes (on rear)
Yes
Front side according to
EN 60529
IP65 (on the front) according to EN 60529 and NEMA4
IP65 all around according to EN 60529 and NEMA4
Vibration load during
operation
Tested according to DIN IEC 60068-2-6: 10 … 58 Hz:
0.075 mm, 58 … 200 Hz: 9.8 m/s² (1 g)
Tested according to DIN IEC 60068-2-6: 10 … 58 Hz:
0.075 mm, 58 … 200 Hz: 9.8 m/s² (1 g)
Shock loading during
operation
Tested according to DIN IEC 60068-2-7: 50 m/s² (5 g),
30 ms, 100 shocks
Tested according to DIN IEC 60068-2-7: 50 m/s² (5 g),
30 ms, 100 shocks
Relative humidity
Tested according to DIN IEC 60068-78,
DIN IEC 60068-2-30: 5% to 80% at 25 °C
(no condensation)
Tested according to DIN IEC 60068-78,
DIN IEC 60068-2-30: 5% to 80% at 25 °C
(no condensation)
Maximum permissible
installation angle +/-
30° over vertical
45° over vertical
Ambient conditions
Ambient temperature during 0 °C … +50 °C in maximum configuration; no fan
operation
15“: 0 °C … +45°C in maximum configuration; no fan
19“: 0 °C … +40°C in maximum configuration; no fan
Certifications & standards
Approvals
CE, cULus(508), marine engineering
CE, cULus(508)
EMC
CE, 55022A, EN 61000-6-4, EN 61000-6-2
CE, 55022A, EN 61000-6-4, EN 61000-6-2
Front panel
6AV7 884-0
6AV7 884-1
6AV7 884-2
6AV7 884-3
6AV7 884-5
6AV7 883-6
(PRO)
6AV7 883-7
(PRO)
12" TFT Touch
12" TFT Key
15" TFT Touch
15" TFT Key
19" TFT Touch
15" TFT Touch
19" TFT Touch
800 x 600
800 x 600
1024 x 768
1024 x 768
1280 x 1024
1024 x 768
1280 x 1024
50000 h at 24 h
continuous
operation,
temperaturedependent
50000 h at 24 h
continuous
operation,
temperaturedependent
50000 h at 24 h
continuous
operation,
temperaturedependent
50000 h at 24 h
continuous
operation,
temperaturedependent
50000 h at 24 h
continuous
operation,
temperaturedependent
50000 h at 24 h
continuous
operation,
temperaturedependent
Display
Resolution
(W x H in pixels)
50000 h at 24 h
MTBF backlit
display (at 25 °C) continous
operation,
temperaturedependent
Type of operation
Function keys
No
36
No
36
No
No
No
Alphanumeric
keyboard
No
Yes
No
Yes
No
No
No
Touch screen
Yes
(analog/resistive)
No
Yes
No
Yes
Yes
Yes
Mouse on the front No
Yes
No
Yes
No
No
No
Design
Centralized
configuration
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Distributed
configuration
No
No
No
No
No
No
No
450 x 290 x 61
450 x 290 x 64
450 x 321 x 59
450 x 380 x 71
400 x 310 x 98
483 x 400 x 115
Dimensions
Mounting dimen- 368 x 290 x 61
sions in centralized configuration (W x H x D,
without optical
drive) in mm
Operator control
unit (W x H) in
mm
400 x 310
(7 HU)
483 x 310
(19", 7 HU)
483 x 310
(19", 7 HU)
483 x 355
(19", 8 HU)
483 x 400
(19", 9 HU)
483 x 400
(19", 9 HU)
483 x 400
(19", 9 HU)
Weights
6.1 kg
6.6 kg
7.0 kg
6.6 kg
7.2 kg
7.4 kg
10.9 kg
General features
Accessories
Touch protective Insertable strips
membranes
for keyboard
Touch protective Insertable strips
membranes
for keyboard
Touch protective Touch protective Touch protective
membranes
membranes
membranes
Power loss in
maximum
configuration
24 V DC:
max. 45 W
24 V DC:
max. 55 W
24 V DC:
max. 60 W
24 V DC:
max. 45 W
24 V DC:
max. 55 W
24 V DC:
max. 55 W
24 V DC:
max. 55 W
Siemens ST 70 N · 2010
9/15
9
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC HMI IPC477C embedded
■ Ordering data
Order No.
Order No.
Preferred versions with spare parts in exchange
("Built to order" with delivery time of max. 15 working days and
replacement devices in exchange)
SIMATIC HMI IPC477C
embedded
E
6AV7 884- 7 A 7 7 7 - 7 7 7 0
Without fan
5 x USB 2.0 (500 mA), one of
which on the front
1 x COM (RS232)
24 V DC power supply with
On/Off switch
E
6AV7 884- 7 A 7 7 7 - 7 7 7 0
Software packages, only with
CF 4 GB or higher
• without SIMATIC software
BA
• with operating system and RTX
WinAC RTX 2009 pre-installed
and configured
BB
• with operating system and HMI
WinCC flexible 2008 SP1 RT
(incl. archives/recipes)
pre-installed and configured
Front panels
• 12" TFT Touch
0
- Number of tags 128 PT
BC
• 15" TFT Touch
2
- Number of tags 512 PT
BD
• 19" TFT Touch
5
- Number of tags 2048 PT
BE
- Number of tags 4096 PT
BF
Processors and fieldbus
9
SIMATIC HMI IPC477C
embedded
• Celeron M 1.2 GHz,
2 x PROFINET (IE)
A
• Celeron M1 1.2 GHz,
2 x PROFINET (IE),
1 x PROFIBUS DP 12
B
• Core2Solo 1.2 GHz,
2 x PROFINET (IE)
D
• Core2Solo 1.2 GHz,
2 x PROFINET (IE),
1 x PROFIBUS DP 12
E
• Core2Duo 1.2 GHz,
2 x PROFINET (IE)
G
• Core2Duo 1.2 GHz,
2 x PROFINET (IE),
1 x PROFIBUS DP 12
H
• with operating system and HMI
WinCC flexible 2008 SP1 RT
(incl. archives/recipes)
pre-installed and configured
BK
- Number of tags 512 PT
BL
- Number of tags 2048 PT
BM
- Number of tags 4096 PT
BN
Further bundles with SIMATIC HMI IPC477C and
WinCC V7.0 SP1
SIMATIC HMI IPC477C
without fan
4 x USB 2.0 on rear,
1 x USB 2.0 on front,
2 x 10/100/1000 Mbit/s Ethernet
(RJ45); software pre-installed on
CF/SSD:
Windows Embedded Standard,
SIMATIC WinCC V7.0 SP1
Main memory (DDR3 RAM),
1 database
• 2 GB
- Number of tags 128 PT
2
Second mass storage
(installed and formatted)
• without
0
• CompactFlash 2 GB
2
• CompactFlash 4 GB
3
• CompactFlash 8 GB
4
• SSD (Solid State Drive)
min. 32 GB
6
E
Client
Processor Celeron M 1.2 GHz,
1 GB DDR3 RAM, CF Card 8 GB,
RT license 128 PT on USB stick
• 15" TFT Touch
• 19" TFT Touch
6AV7 884- 7 AA10-4BX0
2
5
• CompactFlash 2 GB
2
E
Client and Single Station
Processor Core 2 Solo 1.2 GHz,
PROFIBUS DP, 2 GB DDR3 RAM,
CF Card 8 GB, RT license 128 PT
• CompactFlash 4 GB
3
• 15" TFT Touch
2
• CompactFlash 8 GB
4
• 19" TFT Touch
5
• SSD (Solid State Drive)
min. 32 GB
6
First mass storage (with
pre-installed SIMATIC software)
Operating system
• Windows Embedded 2009,
pre-installed
B
• Windows XP Professional
Multi-Language, only with SSD;
without SIMATIC software
DA
E: Subject to export regulations: AL: N and ECCN: 5D002ENC3
9/16
Siemens ST 70 N · 2010
6AV7 884- 7 AE20-4BX0
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC HMI IPC477C embedded
■ Ordering data
Order No.
Order No.
Further bundles with SIMATIC HMI IPC477C and
WinCC V7.0 SP1 (continued)
Further HMI IPC477C and IPC477C PRO as "Built to Order"
versions
SIMATIC HMI IPC477C (cont.)
(max. delivery time is 15 working days and with identified repair).
E
Single Station
Processor Core 2 Duo 1.2 GHz,
PROFIBUS DP, 4 GB DDR3 RAM
6AV7 884- 7 AH30- 7 B 7 0
• 15" TFT Touch
2
• 19" TFT Touch
5
4
• 32 GB SSD
6
SIMATIC HMI IPC477C PRO
• Runtime license 128 PT
on USB stick
X
• Runtime license 2048 PT
on USB stick
W
E
6AV7 884- 7 AH20-4BP0
Processor Core2Duo 1.2 GHz,
2 x PROFINET (IE),
1 x PROFIBUS DP,
2 GB DDR3 RAM
CompactFlashCard plugged in
(internal); 8 GB.
Software pre-installed on CF Card
RTX F: WinAC RTX F 2009
• 12" TFT Touch
0
• 12" TFT Key
1
• 15" TFT Touch
2
• 15" TFT Keys
3
• 19" TFT Touch
5
E
6AV7 884- 7 A 7 7 7 - 7 7 7 0
E
6AV7 883- 7 A 7 7 7 - 7 7 7 0
embedded and without fan
5 x (500 mA), one of which on the
front
24 V DC power supply with
On/Off switch
• 8 GB CF Card
SIMATIC HMI IPC477C with
WinAC RTX F
SIMATIC HMI IPC477C
embedded and without fan, fully
enclosed according to IP65
5 x (500 mA), one of which on the
front
24 V DC power supply with
On/Off switch
Front panels
12" TFT Touch
(not for PRO versions)
0
12" TFT Keys
(not for PRO versions)
1
15" TFT Touch
(not for PRO versions)
2
15" TFT Keys
(not for PRO versions)
3
19" TFT Touch
(not for PRO versions)
5
15" TFT Touch
(IP65 enclosure; PRO)
6
15" TFT Keys
(IP65 enclosure; PRO)
7
Processors and fieldbus
• Celeron M 1.2 GHz,
2 x PROFINET (IE)
A
• Celeron M 1.2 GHz,
2 x PROFINET (IE),
1 x PROFIBUS DP 12
B
• Core2Solo 1.2 GHz,
2 x PROFINET (IE)
D
• Core2Solo 1.2 GHz,
2 x PROFINET (IE),
1 x PROFIBUS
E
• Core2Solo 1.2 GHz,
1 x PROFINET (IE),
1 x PROFINET (3 ports)
F
• Core2Duo 1.2 GHz,
2 x PROFINET (IE)
G
• Core2Duo 1.2 GHz,
2 x PROFINET (IE),
1 x PROFIBUS
H
• Core2Duo 1.2 GHz,
1 x PROFINET (IE),
1 x PROFINET (3 ports)
J
9
Main memory (DDR3 RAM),
1 database
• 1 GB
1
• 2 GB
2
• 4 GB
3
E: Subject to export regulations: AL: N and ECCN: 5D002ENC3
Siemens ST 70 N · 2010
9/17
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC HMI IPC477C embedded
■ Ordering data
Order No.
Order No.
Further HMI IPC477C and IPC477C PRO as "Built to Order"
versions
(max. delivery time is 15 working days and with identified repair).
SIMATIC HMI IPC477C
E
6AV7 884- 7 A 7 7 7 - 7 7 7 0
embedded and without fan
5 x (500 mA), one of which on the
front
24 V DC power supply with
On/Off switch
SIMATIC HMI IPC477C PRO
E
6AV7 883- 7 A 7 7 7 - 7 7 7 0
• without
0
• CompactFlash 2 GB
2
• CompactFlash 4 GB
3
• CompactFlash 8 GB
4
• SSD (Solid State Disk),
min. 32 GB
6
E
6AV7 883- 7 A 7 7 7 - 7 7 7 0
embedded and without fan, fully
enclosed according to IP65
5 x (500 mA), one of which on the
front
24 V DC power supply with
On/Off switch
with operating system and RTX
Windows XP embedded
pre-installed,
WinAC RTX 2009
pre-installed and configured for
PROFIBUS
BB
with operating system and HMI
Windows XP embedded preinstalled,
WinCC flexible 2008 SP1 RT
(incl. archives/recipes)
pre-installed and configured
Mass storage (installed,
Windows XP embedded
(EN/DE) preinstalled, optionally
with SIMATIC software)
• Number of tags 128 PT
BC
• Number of tags 512 PT
BD
• Number of tags 2048 PT
BE
BF
• CompactFlash 2 GB
2
• Number of tags 4096 PT
• CompactFlash 4 GB
3
• CompactFlash 8 GB
4
• SSD (Solid State Disk),
min. 32 GB
6
with operating system and
HMI/RTX 1)
Windows XP embedded preinstalled,
WinCC flexible 2008 SP1 RT
(incl. archives/recipes) and
WinAC RTX 2009
pre-installed and configured
Operating system
Windows Embedded Standard
2009 pre-installed
BA
Windows XP Professional
Multi-Language, only with SSD;
without SIMATIC software
DA
E: Subject to export regulations: AL: N and ECCN: 5D002ENC3
Siemens ST 70 N · 2010
6AV7 884- 7 A 7 7 7 - 7 7 7 0
Software packages with CF
4 GB or higher
Second mass storage
(installed and formatted)
9/18
E
embedded and without fan
5 x (500 mA), one of which on the
front
24 V DC power supply with
On/Off switch
SIMATIC HMI IPC477C PRO
embedded and without fan, fully
enclosed according to IP65
5 x (500 mA), one of which on the
front
24 V DC power supply with
On/Off switch
9
SIMATIC HMI IPC477C
• Number of tags 128 PT
BK
• Number of tags 512 PT
BL
• Number of tags 2048 PT
BM
• Number of tags 4096 PT
BN
1)
Not with Celeron M 1.2 GHz processor
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC HMI IPC477C embedded
■ Ordering data
Order No.
Acessories
SIMATIC IPC Image & Partition A
Creator V3.0
Protective membrane for
Panel PCs 477/577/677
For protecting the touch screen
against dirt/scratches
• for 12" Touch
6AV7 671-2BA00-0AA0
• for 15" Touch (not for PRO)
6AV7 671-4BA00-0AA0
• for 19" Touch
6AV7 672-1CE00-0AA0
Labeling membranes for
Panel PCs 477/577/677
6AV7 672-0DA00-0AA0
For labeling soft keys and
function keys, blank, supplied in
sets of 10
Touch pen
Order No.
6ES7 648-6AA03-0YA0
Software tool for preventive data
backup and hard disk partitioning
for SIMATIC PCs, incl. manual on
CD-ROM (German, English)
SIMATIC IPC USB FlashDrive
C
6ES7 648-0DC40-0AA0
B
6AV7 672-8JD00-0AA0
C
6FC5 235-0AA05-1AA2
C
6AV6 671-3AH00-0AX0
2 GB, USB 2.0, metal enclosure,
bootable
SIMATIC IPC Service USB
FlashDrive
2 GB, USB 2.0, metal enclosure,
bootable
C
6AV7 672-1JB00-0AA0
Undetachable pen for operation
of the touch devices, mounting of
the support on the control cabinet
or directly on the PRO unit
3.5" USB disk drive
with 1 m connecting cable
Industrial USB Hub 4
Expansion components
SIMATIC IPC DiagMonitor V4.1 A
With: Image & Partition Creator
ready-installed, incl. CD
6ES7 648-6CA04-1YX0
Software tool for monitoring
SIMATIC PCs,
incl. manual, on CD-ROM
(German/English)
A: Subject to export regulations: AL: N and ECCN: EAR99S
B: Subject to export regulations: AL: N and ECCN: EAR99T
C: Subject to export regulations: AL: N and ECCN: EAR99H
4 x USB 2.0, IP65 for control
cabinet door or DIN rail
Compact Flash Card
• 2 GB
C
6ES7 648-2BF02-0XF0
• 4 GB
C
6ES7 648-2BF02-0XG0
• 8 GB
C
6ES7 648-2BF02-0XH0
Please note:
The HMI IPC477C is delivered as standard with an inserted
CF card. The licenses are on the supplied USB stick.
9
Note:
Further embedded versions based on IPC427C and Embedded
Controller (mEC) are listed under SIMATIC PC based Control.
Siemens ST 70 N · 2010
9/19
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC Panel PC 477B Bundles
■ Overview
6ES7 676 and 6AV7 85
SIMATIC Panel PC 477B-HMI, 477B-RTX and 477B-HMI/RTX
Drives
Floppy drive
Optional via external USB floppy drive
Optical drives
Possible as external drive via USB
Hard disk/mass storage
Compact Flash Drive with 2 GB or 4 GB
Interfaces
9
• Quick start in automation solutions with Embedded Automation
- SIMATIC WinCC flexible RT preinstalled and ready to switch
on (Panel PC 477B HMI) or SIMATIC WinCC flexible and
SIMATIC WinAC RTX preinstalled and ready to switch on
(Panel PC 477B HMI/RTX)
- PROFIBUS and Industrial Ethernet pre-configured for use in
a SIMATIC environment
- Configuration and programming with SIMATIC WinCC
flexible ES and SIMATIC STEP 7 via Industrial Ethernet,
PROFINET, or PROFIBUS
• Rugged operation
- Hard-disk-free operation based on Compact Flash card
(from 2 GB CF card) and Windows XP embedded
- Operation without fan
• Flexibility of a PC-based automation environment
- Open for additional PC applications
- Can be expanded with PC/104+ cards
- Connection option for USB devices, flat panel monitor or
screen
- Use of WinAC ODK with SIMATIC WinAC RTX
• Data retention for WinAC RTX without uninterruptible power
supply (UPS)
Graphics interface
DVI-I can be used for additional display
unit (only VGA via adapter); color depth
32 bits, graphics memory up to 128 MB,
resolution as integral display in each
case
Connection for
keyboard/mouse
USB / USB
Serial interface
COM1: 1 x V.24 (RS232)
PROFIBUS/MPI
Onboard, floating, max. 12 Mbit/s,
no plug-in card required, CP5611compatible, not upgradeable
PROFINET
3 x RJ45, CP1616-compatible; not
upgradeable
USB
1x on the front, 4x on rear, USB 2.0
(500mA)
Ethernet
onboard, 2 x 10/100/1000 Mbit
(RJ45 with/without PROFIBUS),
1 x 10/100/1000 Mbit (RJ45 with
PROFINET, 3 ports), no plug-in card
required
Multimedia
No
Supply voltage
Supply voltage
24 V DC
Monitoring functions
Temperature
Yes
Watchdog
Yes
Status LEDs
Yes (on rear)
Front side according to
EN 60529
IP65 (on the front) according to
EN60529 and NEMA4
Ambient conditions
Vibration load during
operation
Tested in accordance with
DIN IEC 60068-2-6: 10 … 58 Hz:
0.075 mm, 58 … 200 Hz: 9.8 m/s² (1 g)
Shock loading during
operation
Tested in accordance with
DIN IEC 60068-2-7: 50 m/s² (5 g), 30 ms,
100 shocks
Relative humidity
Tested in accordance with
DIN IEC 60068-78, DIN IEC 68-2-30:
5 … 80% at 25 °C (no condensation)
6ES7 676 and 6AV7 85
Maximum permissible
installation angle +/-
30° over vertical
Processor
Intel Pentium M technology;
Intel Celeron M 1.0 GHz,
Intel Pentium M 1.4 GHz
Ambient temperature during +5 °C … +50 °C in maximum configuraoperation
tion; no fan
Memory type
DDR2-RAM
Approvals
CE, cULus(508)
Main memory
1 GB, 2 GB
EMC
Free slots
3 x PC/104 (over spec. expansion frame)
CE, 55022A, EN 61000-6-4,
EN 61000-6-2
Operating system
Windows XP Embedded
Additional OS information
Language: EN/DE
SIMATIC Software
Optional with pre-installed bundle
software SIMATIC WinCC flexible 2008 or
WinCC flexible/WinAC RTX 2008
■ Technical specifications
General features
9/20
Siemens ST 70 N · 2010
Certifications & standards
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC Panel PC 477B Bundles
■ Technical specifications (continued)
6ES7 676-1
6AV7 851
6ES7 676-2
6AV7 852
6ES7 676-3
6AV7 853
6ES7 676-4
6AV7 854
6ES7 676-6
6AV7 856
12" TFT Touch
12" TFT Key
15" TFT Touch
15" TFT Key
19" TFT Touch
Resolution (W x H in pixels)
800 x 600
800 x 600
1024 x 768
1024 x 768
1280 x 1024
MTBF backlit display
(at 25 °C)
50000 h at 24 h
continuous operation,
temperature-dependent
50000 h at 24 h
continuous operation,
temperature-dependent
50000 h at 24 h
continuous operation,
temperature-dependent
50000 h at 24 h
continuous operation,
temperature-dependent
50000 h at 24 h
continuous operation,
temperature-dependent
Function keys
No
36
No
36
No
Alphanumeric keyboard
No
Yes
No
Yes
No
Touch screen
(analog/resistive)
Yes
No
Yes
No
Yes
Mouse on the front
No
Yes
No
Yes
No
Centralized configuration
Yes
Yes
Yes
Yes
Yes
Distributed configuration
No
No
No
No
No
Mounting dimensions of the
centralized configuration
(W x H x D, without optical
drive) in mm
368 x 290 x 75
450 x 290 x 75
450 x 290 x 75
450 x 321 x 75
450 x 380 x 88
Operator control unit
(W x H) in mm
400 x 310 (7 HU)
483 x 310 (19", 7 HU)
483 x 310 (19", 7 HU)
483 x 355 (19", 8 HU)
483 x 400 (19", 9 HU)
7.3 kg
7.7 kg
8.3 kg
8.7 kg
14.3 kg
Accessories
Touch cover foils
Insertable strips for
keyboard
Touch cover foils
Insertable strips for
keyboard
Touch cover foils
Power loss in maximum
configuration
24 V DC: max. 70 W
24 V DC: max. 70 W
24 V DC: max. 70 W
24 V DC: max. 70 W
24 V DC: max. 90 W,
(contains 3 W per slot) (contains 3 W per slot) (contains 3 W per slot) (contains 3 W per slot) (contains 3 W per slot)
Front panel
Display
Type of operation
Design
Dimensions
Weights
Panel PC in a centralized
configuration approx.
General features
Siemens ST 70 N · 2010
9/21
9
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC Panel PC 477B Bundles
■ Ordering data
Order No.
Order No.
Versions for "Embedded Automation", TIA applications
Further Panel PCs as "built to order" versions
(preferred versions from stock)
(max. delivery time 15 working days)
SIMATIC Panel PC 477B
embedded
E
6ES7 676- 7 BA00-0 7 7 0
6AV7 85 7 - 0 A 7 7 7 - 7 7 A 0
24 V DC power supply
Celeron M 1.0 GHz processor,
main memory 1 GB DDR2
SDRAM,
power supply 24 V DC,
PROFIBUS DP interface
Front panels
• 12" TFT Touch
1
• 12" TFT Key
2
Front panels
• 15" TFT Touch
3
• 12" TFT Touch
1
• 15" TFT Key
4
• 12" TFT Key
2
• 19" TFT Touch
6
• 15" TFT Touch
3
Processor
• 15" TFT Key
4
• Celeron M 1.0 GHz
D
6
• Celeron M 1.0 GHz with
PROFIBUS DB12
E
• Celeron M 1.0 GHz with
PROFINET
F
• Pentium M 1.4 GHz
G
• Pentium M 1.4 GHz with
PROFIBUS DB12
H
• Pentium M 1.4 GHz with
PROFINET
J
• 19" TFT Touch
Mass storage
9
SIMATIC Panel 477B embedded E
• CompactFlash 2 GB
C
• CompactFlash 4 GB
D
• With Windows XP embedded
operating system (EN/DE)
preinstalled
A
• With operating system and RTX,
Windows XP embedded
(EN/DE) preinstalled,
WinAC RTX 2008 preinstalled
and configured for PROFIBUS
(DP)
B
Main memory
• 1 GB DDR2 SDRAM
2
• 2 GB DDR2 SDRAM
3
Second CompactFlash slot
fitted (externally accessible)
• With operating system and HMI
(DP/PN),
Windows XP embedded preinstalled,
WinCC flexible 2008 RT (incl.
archives/recipes) preinstalled
- Number of tags 128 PT
C
- Number of tags 512 PT
D
- Number of tags 2048 PT
E
• With operating system and
HMI/RTX (DP)
Windows XP embedded
preinstalled,
WinCC flexible 2008 RT (incl.
archives/recipes) preinstalled,
WinAC RTX 2008 preinstalled
and configured for PROFIBUS
- Not fitted
0
- With CF card 2 GB
3
- With CF card 4 GB
4
Software packages
With Windows XP embedded
operating system (EN/DE)
preinstalled
• With CF card 2 GB
3B
• With CF card 4 GB
4B
With operating system and RTX
Windows XP embedded (EN/DE)
preinstalled, WinAC RTX 2008
preinstalled and preconfigured
- Number of tags 128 PT
F
• With CF card 2 GB
3
- Number of tags 512 PT
G
• With CF card 4 GB
4
- Number of tags 2048 PT
H
• WinAC RTX (DP) configured for
PROFIBUS
C
• WinAC RTX (PN) configured for
PROFINET
K
With operating system and HMI
(DP/PN),
Windows XP embedded preinstalled,
WinCC flexible 2008 RT (incl.
archives/recipes) preinstalled
E: Subject to export regulations: AL: N and ECCN: 5D002ENC3
9/22
Siemens ST 70 N · 2010
• With CF card 2 GB
3
• With CF card 4 GB
4
• Number of tags 128 PT
D
• Number of tags 512 PT
E
• Number of tags 2048 PT
F
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC Panel PC 477B Bundles
■ Ordering data
Order No.
Order No.
Further Panel PCs as "built to order" versions (continued)
(max. delivery time 15 working days)
SIMATIC Panel 477B embedded E
6AV7 85 7 - 0 A 7 7 7 - 7 7 A 0
24 V DC power supply
Touch pen
C
6AV7 672-1JB00-0AA0
SIMATIC IPC DiagMonitor V4.0 A
6ES7 648-6CA04-0YX0
Captive pen for operation of the
touch devices, mounting of the
support on the control cabinet
Expansion components
With operating system and
HMI/RTX (DP)
Windows XP embedded preinstalled, WinCC flexible 2008 RT
(incl. archives/recipes) preinstalled, WinAC RTX 2008 preinstalled and configured for
PROFIBUS
Software tool for monitoring
SIMATIC PCs,
incl. manual, on CD-ROM
(German/English)
• With CF card 2 GB
3
• With CF card 4 GB
4
SIMATIC IPC Image & Partition A
Creator V3.0
• Number of tags 128 PT
G
• Number of tags 512 PT
H
• Number of tags 2048 PT
J
• With operating system and
HMI/RTX (PN)
Windows XP embedded preinstalled, WinCC flexible 2008 RT
(incl. archives/recipes) preinstalled, WinAC RTX 2008 preinstalled and configured for
PROFINET
6ES7 648-6AA03-0YA0
Software tool for preventive data
backup and hard disk partitioning
for SIMATIC PCs, incl. manual on
CD-ROM (German, English)
SIMATIC IPC USB FlashDrive
C
6ES7 648-0DC40-0AA0
B
6AV7 672-8JD00-0AA0
C
6FC5 235-0AA05-1AA2
C
6AV6 671-3AH00-0AX0
2 GB, USB 2.0, metal enclosure,
bootable
SIMATIC IPC Service USB
FlashDrive
2 GB, USB 2.0, metal enclosure,
bootable
• With CF card 2 GB
3
• With CF card 4 GB
4
Image & Partition Creator readyinstalled, incl. CD
3.5" USB disk drive
• Number of tags 128 PT
L
• Number of tags 512 PT
M
• Number of tags 2048 PT
N
With 1 m connecting cable
Industrial USB Hub 4
4 x USB 2.0, IP65 for control
cabinet door or DIN rail
Accessories
Compact Flash Card
Protective membrane for
Panel PCs 477/577/677/877
• 2 GB
C
6ES7 648-2BF01-0XF0
• 4 GB
C
6ES7 648-2BF01-0XG0
For protecting the touch screen
against dirt/scratches
Expansion kit PC/104
C
6AG4 070-0BA00-0XA0
For integration of PC/104 modules
(packing unit contains 6 expansion frames)
• for 12" Touch
6AV7 671-2BA00-0AA0
• for 15" Touch
6AV7 671-4BA00-0AA0
• for 19" Touch
6AV7 672-1CE00-0AA0
Labeling membranes for
Panel PCs 477/577/677/877
6AV7 672-0DA00-0AA0
For labeling soft keys and
function keys, blank, supplied in
sets of 10
A: Subject to export regulations: AL: N and ECCN: EAR99S
B: Subject to export regulations: AL: N and ECCN: EAR99T
C: Subject to export regulations: AL: N and ECCN: EAR99H
E: Subject to export regulations: AL: N and ECCN: 5D002ENC3
9
Please note:
The scope of supply of the Panel PC 477B mainly comprises the
Panel PC and a software pack that contains the CompactFlash
card with preinstalled and configured software as well as all the
necessary license keys. After the CompactFlash card has been
inserted in the (internal) slot provided, the unit is ready for
switching on.
Note:
Other complete turnkey solutions (the software is already
installed and configured) on Microbox PC basis can be found
under SIMATIC PC based Control.
Siemens ST 70 N · 2010
9/23
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC WinAC MP
■ Overview
• WinAC MP, the software PLC based on Windows CE
• An optimized version is available for all current MP platforms
• The economical solution for all applications in combination
with a rugged hardware platform
• Ideal for tasks on the machine level, saves space and costs
• Best service concept, backup/restore of all data on a standard
SD card, standard Multi Media Card or standard USB stick
■ Technical specifications
Product type
designation
6ES7 6714EE00-0YA0
6ES7 6715EF01-0YA0
6ES7 6717EG01-0YA0
WinAC
MP 177
WinAC
MP 277
WinAC
MP 377
6ES7 6715EF01-0YA0
6ES7 6717EG01-0YA0
WinAC
MP 177
WinAC
MP 277
WinAC
MP 377
Memory
S7 counter
Work memory
• of which retentive
without battery
- can be set
- lower limit
- upper limit
Yes
0
127
Yes
0
255
Yes
0
511
• Retentivity
- can be set
- preset
Yes
8
Yes
8
Yes
8
0
999
0
999
0
999
Yes; SFB0,
SFB1, SFB2
Yes; SFB0,
SFB1, SFB2
Yes; SFB0,
SFB1, SFB2
• integrated
128 Kibyte
256 Kibyte
512 Kibyte
• expandable
No
No
No
8 Mbyte
8 Mbyte
8 Mbyte
Load memory
• integrated RAM, max.
9
Product type
designation
6ES7 6714EE00-0YA0
CPU/ blocks
DB
• Number, max.
512;
FBs+FCs+
DBs=512
1 024;
FBs+FCs+
DBs=1024
2 048;
FBs+FCs+
DBs=2048
• Counting range
- lower limit
- upper limit
• Size, max.
64 Kibyte
64 Kibyte
64 Kibyte
IEC counter
• present
FB
• Number, max.
512;
FBs+FCs+
DBs=512
1 024;
FBs+FCs+
DBs=1024
2 048;
FBs+FCs+
DBs=2048
• Size, max.
64 Kibyte
64 Kibyte
64 Kibyte
• Number, max.
512;
FBs+FCs+
DBs=512
1 024;
FBs+FCs+
DBs=1024
2 048;
FBs+FCs+
DBs=2048
• Size, max.
64 Kibyte
64 Kibyte
• Number, max.
18
• Size, max.
64 Kibyte
• per priority class
• additional within an
error OB
S7 times
• Number
128
256
512
• of which retentive
without battery
- can be set
- lower limit
- upper limit
Yes
0
127
Yes
0
255
Yes
0
511
64 Kibyte
• Retentivity
- can be set
- preset
Yes
0
Yes
0
Yes
0
18
18
64 Kibyte
64 Kibyte
• Time range
- lower limit
- upper limit
10 ms
9 990 s
10 ms
9 990 s
10 ms
9 990 s
8
8
16
IEC timer
2
2
2
• present
Yes; SFB3,
SFB4, SFB5
Yes; SFB3,
SFB4, SFB5
Yes; SFB3,
SFB4, SFB5
64 Kibyte
128 Kibyte
256 Kibyte
FC
OB
Nesting depth
Times/counters and
their retentivity
Data areas and their
retentivity
S7 counter
retentive data area in
total (incl. times,
counters, flags), max.
• Number
9/24
128
Siemens ST 70 N · 2010
256
512
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC WinAC MP
■ Technical specifications (continued)
6ES7 6714EE00-0YA0
6ES7 6715EF01-0YA0
6ES7 6717EG01-0YA0
WinAC
MP 177
WinAC
MP 277
WinAC
MP 377
• Number, max.
2 Kibyte
2 Kibyte
4 Kibyte
• Retentivity available
Yes
Yes
Yes
• Number, max.
512
1 024
• Size, max.
64 Kibyte
64 Kibyte
Product type
designation
6ES7 6714EE00-0YA0
6ES7 6715EF01-0YA0
6ES7 6717EG01-0YA0
WinAC
MP 177
WinAC
MP 277
WinAC
MP 377
Number of logical
connections (also in
network), max.
8
16
32
2 048
PG/OP communication
Yes
Yes
Yes
64 Kibyte
Routing
Yes
Yes
Yes
No
No
No
No
No
No
• supported
Yes;
PUT/GET,
BSEND/BRCV,
USEND/URCV
Yes;
PUT/GET,
BSEND/BRCV,
USEND/URCV
Yes;
PUT/GET,
BSEND/BRCV,
USEND/URCV
Flag
Data blocks
Local data
• per priority class, max. 16 384 byte;
for all priority
classes
16 384 byte;
for all priority
classes
16 384 byte;
for all priority
classes
Product type
designation
Communication
functions
Global data communication
• supported
S7 basic communication
Address area
• supported
I/O address area
S7 communication
• overall
2 Kibyte
4 Kibyte
8 Kibyte
• Outputs
2 Kibyte
4 Kibyte
8 Kibyte
Process image
• Inputs
1 Kibyte
2 Kibyte
2 Kibyte
• as server
Yes
Yes
Yes
• Outputs
1 Kibyte
2 Kibyte
2 Kibyte
• as client
Yes
Yes
Yes
• Inputs, adjustable
1 Kibyte
2 Kibyte
2 Kibyte
• User data per job, max. 480 byte
480 byte
480 byte
• Outputs, adjustable
1 Kibyte
2 Kibyte
2 Kibyte
Number of connections
• Inputs, default
512 byte
512 byte
512 byte
• overall
• Outputs, default
512 byte
512 byte
512 byte
• consistent data, max.
32 byte
32 byte
32 byte
8;
(max. 8 DP,
rest
PROFINET)
16;
(max. 8 DP,
rest
PROFINET)
32;
(max. 8 DP,
rest
PROFINET)
1
1
1
1
1
1
6
14
30
4
8
8
Yes
Yes
Yes
Yes
No
Yes
No
Yes
No
No
No
No
Yes
No
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
12 Mbit/s
12 Mbit/s
12 Mbit/s
Hardware
configuration
Number of DP masters
• integrated
1
1
1
Time of day
Runtime meter
• Number
8
8
8
• Number/
Number range
0 to 7
0 to 7
0 to 7
Yes
Yes
Yes
Test commissioning
functions
Status/control
• Status/control variable Yes; Status
blocks, single
step, breakpoint
Yes; Status
blocks, single
step, breakpoint
Yes; Status
blocks, single
step, breakpoint
No
No
No
• present
Yes
Yes
Yes
• Number of entries,
max.
- can be set
1 000;
preset 120
Yes
1 000;
preset 120
Yes
1 000;
preset 120
Yes
Forcing
• Forcing
• usable for
OP communication
- reserved for
OP communication
• usable for routing
9
1st interface
DP master
S7 message functions
Process diagnostic
messages
• usable for
PG communication
- reserved for
PG communication
Diagnostic buffer
• Number of connections, max.
• Services
- PG/OP communication
- Routing
- Global data communication
- S7 basic communication
- S7 communication
- Equidistance mode
support
- SYNC/FREEZE
- Activation/deactivation of DP slaves
- DPV1
• Transmission speeds,
max.
Siemens ST 70 N · 2010
9/25
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC WinAC MP
■ Technical specifications (continued)
Product type
designation
■ Ordering data
6ES7 6714EE00-0YA0
6ES7 6715EF01-0YA0
6ES7 6717EG01-0YA0
WinAC MP,
version WinAC MP 1772)
WinAC
MP 177
WinAC
MP 277
WinAC
MP 377
incl. a Single License for MP 177
on USB stick1) and electronic
documentation
32
32
32
2 Kibyte
2 Kibyte
4 Kibyte
4 Kibyte
8 Kibyte
8 Kibyte
DP master
• Number of DP slaves,
max.
• Address area
- Inputs, max.
- Outputs, max.
CPU/ programming
Configuration software
• STEP 7
Yes;
Yes;
Yes;
STEP7 V5.4
STEP7 V5.4
STEP7 V5.4
SP4 or higher SP4 or higher SP4 or higher
• WinCC flexible
Compact
Yes; WinCC
flexible 2008
SP1
No
• WinCC flexible
Standard
Yes; WinCC
flexible 2008
SP1
Yes; WinCC
flexible 2008
SP1
Yes; WinCC
flexible 2008
SP1
• WinCC flexible
Advanced
Yes; WinCC
flexible 2008
SP1
Yes; WinCC
flexible 2008
SP1
Yes; WinCC
flexible 2008
SP1
Yes
Yes
Yes
No
• LAD
9
• FBD
Yes
Yes
Yes
• STL
Yes
Yes
Yes
• SCL
Yes
Yes
Yes
• CFC
Yes
Yes
Yes
Yes;
System error
messages
Yes;
System error
messages,
ProAgent
(S7-Graph)
Yes;
System error
messages,
ProAgent
(S7-Graph)
• can be set
Yes
Yes
Yes
• preset
6 000 ms
6 000 ms
6 000 ms
Software libraries
• Process diagnostics
Cycle time monitoring
Operating systems
• Windows CE
Yes; Version
5.0 or higher
Yes; Version
5.0 or higher
Yes; Version
5.0 or higher
1; English
1; English
1; English
Online languages
Number
6ES7 671-5EF01-0YA0
incl. a Single License for MP 277
on USB stick1) and electronic
documentation
WinAC MP,
version WinAC MP 377 2)
6ES7 671-7EG01-0YA0
incl. a Single License for MP 377
on USB stick1) and electronic
documentation
Complete pre-assembled
packages
E
6AV6 652-2JC01-2AA0
E
6AV6 652-3MC01-1AA0
E
6AV6 652-3LC01-1AA0
E
6AV6 652-3PC01-1AA0
E
6AV6 652-3NC01-1AA0
• MP 177 6" Touch
• WinAC MP Version 177
• Electronic documentation
• Single License for MP 177 on
USB flash drive1)
• Standard SD card 256 MB
(empty)
Package MP 277 8" Touch
• MP 277 8" Touch
• WinAC MP Version 277
• Electronic documentation
• Single License for MP 277 on
USB stick1)
• Standard SD card 256 MB
(empty)
Package MP 277 8" Key
• MP 277 8" Key
• WinAC MP Version 277
• Electronic documentation
• Single License for MP 277 on
USB stick1)
• Standard SD card 256 MB
(empty)
Package MP 277 10" Touch
Operating system
6ES7 671-4EE00-0YA0
WinAC MP,
version WinAC MP 277 2)
Package MP 177 6" Touch
Programming language
Order No.
• MP 277 10" Touch
• WinAC MP Version 277
• Electronic documentation
• Single License for MP 277 on
USB stick1)
• Standard SD card 256 MB
(empty)
Package MP 277 10" Key
• MP 277 10" Key
• WinAC MP Version 277
• Electronic documentation
• Single License for MP 277 on
USB stick1)
• Standard SD card 256 MB
(empty)
1)
Can only be used for license handling
UCL version on request
E: Subject to export regulations: AL: N and ECCN: 5D002ENC3
2)
9/26
Siemens ST 70 N · 2010
© Siemens AG 2010
Embedded/PC-based Automation
Embedded Automation
SIMATIC WinAC MP
■ Ordering data
Package MP 377 12" Touch
Order No.
E
6AV6 652-4FC01-2AA0
• MP 377 12" Touch
• WinAC MP Version 377
• Electronic documentation
• Single License for MP 377 on
USB stick1)
• Standard SD card 256 MB
(empty)
Package MP 377 12" Key
E
6AV6 652-4EC01-2AA0
• MP 377 12" Key
• WinAC MP Version 377
• Electronic documentation
• Single License for MP 377 on
USB stick1)
• Standard SD card 256 MB
(empty)
Package MP 377 15" Touch
E
6AV6 652-4GC01-2AA0
E
6AV6 652-4HC01-2AA0
• MP 377 19" Touch
• WinAC MP Version 377
• Electronic documentation
• Single License for MP 377 on
USB stick1)
• Standard SD card 256 MB
(empty)
Starter package 613 WinAC MP E
6AV6 652-2JD01-2AA0
• SIMATIC MP 177 6" Touch with
installation accessories,
mounting seal, power supply
connector
• SIMATIC WinAC MP incl.
Single License on USB flash
drive and electronic documentation
• SD card 256 KB (empty)
• ET 200M incl.
• 16 DI, 16 DO, 8 AI, 2 AO
• FM 350-2 8-channel counter
• Front connector, bus connector, and mounting rail
E: Subject to export regulations: AL: N and ECCN: 5D002ENC3
6AV6 652-2JD01-2AA1
E
6AV6 652-3LD01-1AA1
E
6AV6 652-3LD01-1AA0
• SIMATIC MP 277 8" Key with
installation accessories,
mounting seal, power supply
connector
• SIMATIC WinAC MP incl. Single
License on USB flash drive and
electronic documentation
• SD card 256 KB (empty)
• ET 200M incl.
32 DI, 16 DO, 8 AI, 2 AO
• FM 350-2 8-channel counter
• Front connector, bus connector, and mounting rail
Starter package 636K
WinAC MP
Starter packages
E
• SIMATIC MP 177 6" Touch with
installation accessories,
mounting seal, power supply
connector
• SIMATIC WinAC MP incl. Single
License on USB flash drive and
electronic documentation
• SD card 256 KB (empty)
• ET 200M incl.
32 DI, 16 DO, 8 AI, 2 AO
• FM 350-2 8-channel counter
• Front connector, bus connector, and mounting rail
Starter package 635K
WinAC MP
• MP 377 15" Touch
• WinAC MP Version 377
• Electronic documentation
• Single License for MP 377 on
USB stick1)
• Standard SD card 256 MB
(empty)
Package MP 377 19" Touch
Order No.
Starter package 635T
WinAC MP
• SIMATIC MP 277 8" Key with
installation accessories,
mounting seal, power supply
connector
• SIMATIC WinAC MP incl. Single
License on USB flash drive and
electronic documentation
• SD card 256 KB (empty)
• ET 200M incl.
32 DI, 16 DO, 8 AI, 2 AO
• Front connector, bus connector, and mounting rail
Starter package 636T
WinAC MP
9
E
6AV6 652-3PD01-1AA0
• SIMATIC MP 277 10" Touch with
installation accessories,
mounting seal, power supply
connector
• SIMATIC WinAC MP incl. Single
License on USB flash drive and
electronic documentation
• SD card 256 KB (empty)
• ET 200M incl.
32 DI, 16 DO, 8 AI, 2 AO
• Front connector, bus connector, and mounting rail
1)
Can only be used for license handling
Siemens ST 70 N · 2010
9/27