Introduction
Congratulations on your new HSDPA WX-T82 phone.
About This User Guide
This user guide is carefully designed to help you learn
about your phone’s features and operations quickly and
effectively.
NOTICE
• We strongly recommend that you keep separate
permanent written records of all important data. Data
may be lost or altered in virtually any electronic
memory product under certain circumstances.
Therefore, we assume no responsibility for data lost
or otherwise rendered unusable, whether as a result of
improper use, repairs, defects, battery replacement,
use after the specified battery life has expired or any
other cause.
• We assume no responsibility, directly or indirectly,
for financial losses or claims from third parties
resulting from the use of this product and any of its
functions, such as stolen credit card numbers, the loss
or alteration of stored data, etc.
• All company and/or product names are trademarks
and/or registered trademarks of their respective
holders.
• Screen layout may differ from that illustrated in this
user guide.
The information described in this user guide is
subject to change without notice.
• All the functions described in this user guide may not
be supported by all networks.
• We assume no responsibility for downloaded
contents, information, etc. from the network.
• Occasionally, a few black or bright pixels may appear
on the screen. Please note that this will not have any
impact on any of the features or on performance.
Intellectual Property Rights
According to copyright laws, the reproduction,
alteration and use of material which is protected by
copyright (music, pictures, etc.) is only permitted for
personal or private use. If the user is not in possession
of more extensive copyright or has not received the
explicit permission from the copyright owner to
reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation
of the copyright laws and gives the copyright owner the
right to claim for damages. For this reason, avoid the
illegal use of material which is protected by copyright.
Windows is a registered trademark of Microsoft
Corporation in the United States and/or other countries.
Introduction
1
Powered by JBlend™ Copyright
1997-2005 Aplix Corporation. All rights
reserved.
JBlend and all JBlend-based trademarks
and logos are trademarks or registered
trademarks of Aplix Corporation in Japan
and other countries.
Powered by Mascot Capsule®/Micro3D Edition™
Mascot Capsule® is a registered trademark of HI
Corporation
©2002-2007 HI Corporation. All Rights Reserved.
Licensed by Inter Digital Technology Corporation under one
or more of the following United States Patents and/or their
domestic or foreign counterparts and other patents
pending, including U.S. Patents: 4,675,863: 4,779,262:
4,785,450: 4,811,420: 5,228,056: 5,420,896: 5,799,010:
5,166,951: 5,179,571 & 5,345,467
T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928, and 6,011,554; Australian Pat. No. 727539;
Canadian Pat. No. 1,331,057; United Kingdom Pat. No.
2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842
463 (96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB;
Republic of Korea Pat. Nos. KR201211B1 and
KR226206B1; and additional patents are pending
worldwide.
CP8 PATENT
2
Introduction
microSD™ is a trademark of the SD Card Association.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sharp is
under license. Other trademarks and trade names are
those of their respective owners.
Licensed by QUALCOMM Incorporated under one or more
of the following United States Patents and/or their
counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
This product contains NetFront Browser and NetFront
Messaging Client of ACCESS CO.,LTD.
ACCESS and NetFront are trademarks or registered trademarks
of ACCESS CO., LTD. in Japan and other countries.
NetFront Browser © Copyright 1996-2007 ACCESS CO., LTD.
NetFront Messaging Client © Copyright 2000-2007
ACCESS CO., LTD.
This software is based in part on the work of the
Independent JPEG Group.
[FarEasTone and Logo] are trademarks or registered
trademarks of FarEasTone Telecommunications Co., Ltd. in
Taiwan and other countries.
Customer Service Call: 0800-058-885
Also Sharp Corp. is authorized with bona fide use of the
foregoing trademark in relating course of trade in Japan.
Information contained in this manual is the property of
FarEasTone and Sharp.
FarEasTone and Sharp reserve the right to change product
specifications without prior notice.
FarEasTone and Sharp reserve the right to change
information contained in this manual without prior notice.
Introduction
3
This product is licensed under the MPEG-4 Visual Patent
Portfolio License for the personal and non-commercial use of
a consumer to (i) encode video in compliance with the
MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii) decode
MPEG-4 Video that was encoded by a consumer engaged in
a personal and non-commercial activity and/or was obtained
from a licensed video provider. No license is granted or
implied for any other use. Additional information may be
obtained from MPEG LA.
See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent
Portfolio License for encoding in compliance with the
MPEG-4 Systems Standard, except that an additional license
and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media
which is paid for on a title by title basis and/or (ii) data which
is paid for on a title by title basis and is transmitted to an end
user for permanent storage and/or use. Such additional
license may be obtained from MPEG LA, LLC.
See http://www.mpegla.com for additional details.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
4
Introduction
Useful Functions and Services
Your phone offers you the following features:
• Video Calling. You can talk while viewing each other
on respective screens.
• 3D and colour Java™ games. You can also download
various games and applications from FarEasTone via
the mobile Internet.
• Thin Film Transistor (TFT) colour LCD display with
images that are clearer and easier to view.
• A built-in digital camera with an auto focus function
for taking pictures and video clips.
• A message function for reading and creating SMS
messages.
• MMS (Multimedia Messaging Services) for sending
picture, sound and video messages to brighten
someone’s day.
• Email for sending up to 300 KB and receiving mail
with attachments.
• A colour WAP browser for accessing information on
the mobile Internet.
• Your own ringtones and ring video clips. You can use
sound or video clip files as a ringtone or ring video
clip.
• A music player that can play back MP3, MPEG-4 and
3GPP format sound files (supported codec of MPEG4 or 3GPP are AMR, AAC, AAC+, and AAC+e).
• Playback of downloaded sound and video clip files.
• A voice recorder function for recording and playing
back voice clips.
• A Bluetooth® wireless technology interface for
establishing contact and transmitting data with
certain devices. You can transmit pictures, sounds,
and video clips to OBEX-enabled phones.
• A data synchronisation function for updating
Phonebook entries on the Internet.
• A schedule alarm for creating and sending schedule
entries with alarm settings.
• A microSD™ memory card slot that expands
connectivity with a PC using the memory card.
Introduction
5
Contents
Introduction ................................................. 1
List of Menu Functions ............................... 8
Your Phone ................................................ 10
Optional Accessories ................................. 10
Getting Started .......................................... 11
Inserting/Removing the SIM/USIM Card and
the Battery ................................................. 15
Charging the Battery ................................. 16
Inserting/Removing the Memory Card ...... 18
Connecting the Handsfree Kit ................... 19
Turning Your Phone On and Off ............... 20
Slide Functions and Keypad Lock ............. 21
Display Indicators ...................................... 22
Navigating Functions ................................ 24
Voice Call/Video Calling Functions ......... 25
Entering Characters .................................. 35
Changing the Input Language ................... 36
Changing the Input Method ....................... 36
Chinese User Dictionary ........................... 41
Using Templates ........................................ 43
Insert Phonebook Entries ........................... 43
6
Contents
Using the Menu ..........................................44
Main Menu ................................................ 44
Shortcut Keys ............................................ 44
Call Manager ..............................................45
Sending a Message from the Phonebook ... 48
Audiovisual ................................................55
Camera .......................................................62
Taking Pictures .......................................... 62
Recording Video Clips .............................. 63
Common Functions in the Photo and
Video Camera Modes ................................ 63
Functions in Photo Camera Mode ............. 66
Functions in Video Camera Mode ............. 69
Messages ...................................................70
SMS ........................................................... 70
Long SMS .................................................. 70
MMS .......................................................... 70
Email .......................................................... 70
FET Mobile Internet ...................................83
Navigating a WAP or Web Page ............... 84
Gallery ........................................................ 88
Java™ ......................................................... 96
Organiser ................................................. 101
SIM Application ....................................... 115
Settings .................................................... 116
Call Log .................................................... 140
Connectivity ............................................. 142
Connecting WX-T82 to Your PC ............. 148
System Requirements .............................. 148
3G/GSM Modem ..................................... 148
Handset Manager ..................................... 150
Music Manager ........................................ 151
Sync Manager .......................................... 153
Troubleshooting ...................................... 154
Safety Precautions and Conditions of
Use ............................................................ 156
Conditions of Use .................................... 156
Environment ............................................ 159
Precautions Concerning Vehicle Use ...... 159
SAR .......................................................... 159
FCC NOTICE .......................................... 160
Out of Warranty List ................................ 162
Index ......................................................... 163
Quick Reference ...................................... 165
Contents
7
List of Menu Functions
WX-T82 functions are listed below.
See relevant page for details of each function. The menu’s corresponding number is used for shortcuts. For details,
see page 44.
1 Java™
1 Java™ Gallery
2 Java™
Settings
3 Java™
Information
p. 96
p. 98
p. 100
2 FET Mobile Internet
Homepage
Go to URL
Bookmarks
Alert Inbox
My Saved
Page
6 Access History
7 Browser
Settings
1
2
3
4
5
8
p. 83
p. 83
p. 83
p. 83
p. 83
p. 83
p. 85
List of Menu Functions
3 Organiser
4 Messages
(Tab 1: Organiser)
1 Calendar
2 Alarms
3 Stopwatch
4 Tasks
5 World Clock
6 Countdown
Timer
(Tab 2: Utilities)
1 Calculator
2 Voice Recorder
3 Scanner
4 Expenses Memo
5 Phone Help
1 Create
Message
2 Inbox
3 Alert Inbox
4 Drafts
5 Templates
6 Sent
7 Outbox
8 Voice Mail
9 Cell
Broadcasts
10 Area Info
11 Messaging
Settings
12 Memory Status
p. 101
p. 105
p. 106
p. 106
p. 109
p. 109
p. 110
p. 111
p. 111
p. 113
p. 114
5 Camera
6 Gallery
p. 71
p. 74
–
p. 74
p. 43
p. 71
p. 73
–
p. 77
p. 78
p. 78
–
p. 62
Picture Gallery
Video Gallery
SD VIDEO
Sound Gallery
Themes
Java™ Gallery
Text
Templates
8 Other
Documents
9 Memory Status
1
2
3
4
5
6
7
p. 88
p. 89
p. 90
p. 90
p. 90
p. 96
p. 91
p. 92
p. 95
7 Audiovisual
1 Video Player
2 Streaming
Player
3 Music Player
4 FM Radio
p. 55
p. 57
p. 57
p. 60
8 Call Manager
9 Settings
(Tab 1: Phonebook)
1 Phonebook
2 Add New
3 My Card
(Tab 2: Services)
1 Call Voicemail
2 Speed Dial List
3 Service Dialling
Number*
4 FDN*
(Tab 3: Phonebook
Settings)
1 Manage
Groups
2 Message
Groups
3 Phonebook
Settings
4 Advanced
(Tab 1: Profiles)
1 Normal
2 Meeting
3 Activity
4 Car
5 Headset
6 Silent
(Tab 2: Phone
Settings)
1 Display
Settings
2 Sound
Settings
3 Slider Settings
4 Date & Time
5 Language
6 Shortcuts
7 Switch
Ringtone
Output
8 Earpiece
Volume
9 Master Reset
p. 45
p. 45
p. 46
–
p. 53
p. 47
p. 47
p. 49
p. 53
p. 45
p. 51
p. 116
p. 116
p. 116
p. 116
p. 116
p. 116
p. 121
p. 125
p. 125
p. 126
p. 127
p. 127
–
–
p. 127
(Tab 3: Other
Settings)
1 Call Settings
2 Video Calling
Settings
3 Security
Settings
4 Internet
Settings
5 Network
Settings
10 SIM
Application*
12 Connectivity
p. 128
p. 132
p. 133
p. 135
1
2
3
4
5
6
Bluetooth
Mass Storage
USB Charge
Card Settings
Off Line Mode
Backup/
Restore
p. 142
p. 146
p. 146
p. 146
p. 146
p. 146
p. 138
p. 115
* Depends on SIM/USIM
card contents.
11 Call Log
1 All Calls
2 Dialled
Numbers
3 Missed Calls
4 Received Calls
5 Call Timers
6 Call Costs*
7 Data Counter
p. 140
p. 140
p. 140
p. 140
p. 140
–
p. 141
List of Menu Functions
9
Your Phone
Please check the following carefully. Your phone
should come complete with:
• HSDPA/3G (UMTS)/EDGE/GSM 900/1800/1900
GPRS phone
• Rechargeable Li-ion Battery
• AC Charger
• Stereo Handsfree
• Chinese User Guide
Optional Accessories
• Li-ion Spare Battery
• Cigarette Lighter Charger
• USB Data Cable
• Handsfree Microphone Unit
• Stereo Headset
The above accessories may not be available in all
regions.
For details, please contact FarEasTone.
10
Your Phone
Getting Started
1
2
10
23
24
25
26
27
11 21
3
4
5
6
7
8
9
12 22
13
14
15
16
17
18
19
20
Getting Started
11
1. Sub Camera
2. Small Light:
Flashes when an incoming call or a new message is
received or missed, if Event Light or Status Light
(p. 120) is enabled.
3. Navigation Keys (Arrow Keys): abcd
Moves cursor to highlight a menu item, etc.*
Up arrow key (a) displays the Shortcut menu
when pressed in stand-by.
Down arrow key (b) displays the Phonebook
entries when pressed in stand-by.
Left arrow key (c) displays the list of Java™
Gallery when pressed in stand-by.
Right arrow key (d) displays Gallery when
pressed in stand-by.
4. Centre Key: B
Displays Main menu in stand-by, and executes
functions.
Long press in stand-by to initiate keypad lock.
Long press when keypad is locked to unlock
keypad.
5. Left Soft Key: A
Executes the function in the lower left of the screen.
Displays Main menu in stand-by.*
12
Getting Started
6. Send/Redial Key: D
Makes voice calls or accepts calls, and displays the
call logs in stand-by.
7. Video Telephony Key: S
Makes video callings or accepts calls, and displays
the video calling screen in stand-by.
8. Voicemail Key: G
Long press to connect to the Voicemail centre.
(Depending on the SIM/USIM card.)
9. * /Shift Key: P
Switches character input method as follows on the
text entry screen.
In English mode: Abc, ABC, abc and 123. In T9
mode, T9 Abc, T9 ABC, T9 abc and 123.
In traditional Chinese mode: Abc, ABC, abc, 123,
T9 BoPoMoFo, and T9 Stroke.
Press to enter P, ? or * in stand-by.
Long press in stand-by to lock the keypad.
10.Earpiece/Speaker
11.Display
12.Right Soft Key: C
Executes the function in the lower right of the
screen.
Accesses “FET Mobile Internet” by opening the
browser in stand-by.*
13.End/Power Key: F
Ends a call and turns power on/off.
14.Audiovisual Key: T
While in stand-by:
Relaunches the corresponding player if playing
music and FM Radio in the background.
Displays Multimedia menu if not playing.
15.Clear/Back Key: U
Clears the characters before the cursor, returns to
the previous screen, etc.
16.Message Key: E
Displays Messaging menu.
17.Keypad
18.#/Silent Key: R
Displays symbol screen on the text entry screen.
Long press to switch languages on the text entry
screen.
Long press in stand-by to switch Profiles settings
between the mode most recently activated and
Silent mode.
19.Microphone
20.External Connector:
Used to connect either the charger or a USB data
cable.
21.Main Camera
22.Built-in Aerial:
Warning: Do not cover the top of the phone with
your hand when in use as this may interfere with the
performance of the built-in aerial.
23.Battery Cover
24.Camera Key: X
Long press in stand-by to activate the camera.
Takes a picture or starts recording video when the
camera is active.
Getting Started
13
25.Side Keys: VW
Press in stand-by or during a call to increase or
decrease the earpiece volume.
Press during incoming call to mute the ringer or
disable vibration mode (if active).
Press while listening to music (or video) to increase
or decrease the earpiece volume.
26.Handsfree Kit/Microphone Connector
27.microSD Card Slot
* Default stand-by assignment can be changed via the
Shortcuts menu. See “Shortcuts” on page 127.
14
Getting Started
Inserting/Removing the SIM/USIM
Card and the Battery
1. Slide off the battery cover (
).
3. Hold the battery so that the metal contacts of the
battery are facing down, slide the guides on the top
of the battery into the battery slots
, and then
insert it
.
2. Unlock the SIM/USIM lock
, slide the SIM/
USIM card into the SIM/USIM holder
, and lock
the SIM/USIM lock
.
4. Replace the battery cover.
Note
• Make sure that only 3V SIM/USIM cards are used.
• Make sure that the standard accessory battery is
used.
SIM/USIM card
Getting Started
15
Battery Disposal
The device is battery-powered. In order to protect the
environment, please read the following points
concerning battery disposal:
• Take the used battery to your local waste depot,
dealer or customer service centre for recycling.
• Do not expose the used battery to a naked flame,
immerse in water or dispose with the household
waste.
Charging the Battery
You must charge the battery for at least 150 minutes
before using your phone for the first time.
Using the Charger
1. Open the cover of the external connector, and
connect the charger horizontally to the external
socket located at the bottom of the phone until it
clicks.
Please recycle waste batteries
2. Connect the charger to an AC outlet.
When the phone is charging, the battery status icon
(
) displays the current status. The Small Light
also lights up.
Standard charging time: Approx. 150 minutes
16
Getting Started
Note
• Charging time may vary depending on the state of the
battery and other conditions. (See “Battery” on
page 157.)
To Disconnect the Charger
When charging is completed, the battery indicator icon
displays the full charge status. The Small Light also
turns off when completed.
1. Unplug the charger from the AC outlet.
2. Push and hold the side buttons of the charger
,
then disconnect the charger from the external socket
of the phone
.
Note
• Do not use any non-approved chargers as they may
damage your phone and invalidate any warranties,
see “Battery” on page 157 for details.
• Forcibly disconnecting the charger may cause
malfunction.
IMPORTANT SAFETY INSTRUCTIONS — SAVE
THIS INSTRUCTION
DANGER — TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THIS INSTRUCTION
If the shape and size of the plug do not match the power
socket, use a plug adapter that matches.
3. Close the cover.
Getting Started
17
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power
for charging from the cigarette lighter socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right
of the screen.
Low Battery during Use
When the battery is running low, an alarm will sound
and “
” is displayed on the screen.
If you are using your phone and you hear the low
battery alarm, attach your charger as soon as possible.
The phone may not be able to continue normal
operation if you continue to use it.
Battery Indicators
Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
18
Getting Started
Inserting/Removing the Memory Card
Note
• Make sure that the phone is turned off before
inserting/removing the memory card.
• Be sure to insert the card in the correct direction and
orientation.
• Keep all memory cards out of the reach of small
children.
1. Turn off the phone.
2. Open the microSD card slot cover.
3. Insert the memory card until it clicks. (To remove
the memory card, push the memory card until it
clicks.)
Connecting the Handsfree Kit
1. Open the connector cover.
2. Connect the handsfree kit.
4. Close the cover.
Tip
• You see the following indicators when the memory
card is in use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable.
Make sure the card is properly inserted.
: Appears when the card is being written to or
read.
: Appears when the card is being formatted.
Getting Started
19
Turning Your Phone On and Off
To turn the power on or off, long press F for
approximately 2 seconds.
To Enter the PIN Code
If the PIN (Personal Identification Number) code is
enabled you are asked to enter the PIN code each time
the phone is switched on. For details on setting the PIN
code, see “Enabling/Disabling the PIN Code” on
page 134.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press B.
Note
• If your PIN code is entered incorrectly three times in
a row, the SIM/USIM card is locked. See “Enabling/
Disabling the PIN Code” on page 134.
• If the clock settings have not been entered, the date
and time entry screen is displayed (p. 126).
20
Getting Started
To Copy All Phonebook Entries from the SIM/
USIM Card
When you insert the SIM/USIM card into your phone
for the first time and start the Phonebook application,
you are asked whether you wish to copy Phonebook
entries on the SIM/USIM card. Follow the on-screen
instructions, or you can do it later using the Phonebook
menu as follows:
“Call Manager” → “Phonebook Settings” tab →
“Advanced” → “Copy All Entries”
1. Select “From SIM to Handset”.
Slide Functions and Keypad Lock
When your phone is on, you can make a call or answer
an incoming call by sliding open your phone.
You can terminate the call and lock the keypad to
prevent it from being pressed accidentally by sliding
close your phone.
Note
• You can use some applications even when your phone
is closed.
• Some Java™ applications are suspended when your
phone is closed.
• Do not stick items on the back of the LCD display
when the slider is open.
You can also operate the following actions by sliding
open/close your phone.
When opened:
• The display and keypad light up.
• The keypad is unlocked.
• Incoming calls can be answered.
See “Slider Settings” on page 125.
When closed:
• The handset sends a busy tone to the caller.
• Calls are terminated.
See “Slider Settings” on page 125.
Getting Started
21
Display Indicators
Indicator area
2.
/
:
3.
4.
/
/
:
/
5.
/
:
6.
/
/
:
7.
8.
:
/
/
/
9.
/
/
/
10.
:
:
Left soft key Centre key Right soft key
1.
22
/
: Strength of received signal/Service out
of range
: HSDPA
: EDGE
: 3G (UMTS)/GPRS
/ : GPRS enabled/GPRS disabled
: Roaming outside network
Getting Started
Connection to the server [established/
communicating]
Voice call [incoming/in progress]
Video calling communication mode
enabled [voice/video/voice and video]
Alerts [text message and multimedia
message/Email]
Mailbox full [SIM/USIM card only/
handset only/both SIM/USIM card and
handset]
“Voice Calls” diverts set to “Always”
/ :
Connection status
[USB cable/Bluetooth wireless setting
[enabled (in stand-by)/exchanging
information/talking with the Bluetooth
headset/Hide my phone]]
:
Java™ application [executed (colour)/
suspended (grey)]/Music player/FM
Radio
Secure WAP page displayed
11.
/
/
/
:
Silent/vibration setting [silent/
increasing volume/vibration enabled/
silent and vibration enabled]
12. / / : Speaker mode [speaker phone/speaker
activated/microphone muted]
13. :
Memory card inserted
14.
:
Battery level
15. :
Daily alarm enabled
16. / :
Schedule entry enabled [with/without
reminder alarm]
17. :
Outbox contains unsent messages [text
message/multimedia/Email]
18. / / : WAP/OTA provisioning alerts [WAP
alert/OTA provisioning alert/WAP and
OTA provisioning alerts]
19. :
Voicemail message alert
20. :
“Show Secret Data” set to “On”
21. :
Function Lock enabled
22. :
Keypad Lock enabled
23. (No display)/ / / / / :
Current profile [Normal/Meeting/
Activity/Car/Headset/Silent]
Getting Started
23
Navigating Functions
All applications are accessed from the Main menu. To
open the Main menu, press the centre key B in
stand-by.
To launch applications, you will need to highlight menu
items, and make selections. To select a menu item
(indicated in quotation marks), move the cursor using
a, b, c and d, and press B to select.
In certain procedures, you will need to press one of the
soft keys (indicated in square brackets), which are
displayed in the lower left and right of the screen. Press
the corresponding soft key (A or C).
To return to the previous screen, press the right soft key
if it displays Back. To close the Main menu, press the
right soft key if it displays Back.
Each section in this user guide starts with a list of items
you will need to select in order (indicated in italics)
before performing the procedures shown. Select each
item to reveal the next set of items that you have to
choose from. Open subsection items after opening
those listed in the main section.
Example:
“Java™” → “Java™ Settings”
24
Navigating Functions
The following menus have tabs - Organiser, Call
Manager and Settings.
You can select the desired tab with the c/d key, and
after that you can select the item you wish to set in the
selected tab with the a/b key.
Example:
“Call Manager” → “Phonebook Settings” tab →
“Advanced”
Voice Call/Video Calling
Functions
For details on setting call functions, see “Call Log” on
page 140.
Making a Voice Call
1. Enter the area code and the phone number you wish
to dial and press D to dial.
If you enter the wrong number, press U to delete
the number to the left of the cursor.
Emergency Calls
1. Enter 112, 110 or 119 using the keypad and press D
to dial.
Note
• Emergency calls may not be able to be made on all
mobile phone networks when certain network
services and/or phone features are in use. Contact
your service provider for more information.
• This emergency number can normally be used to
make an emergency call in any country, with or
without a SIM/USIM card inserted, if a 3G (UMTS)/
GSM network is within range.
International Calls
1. Long press Q until a + (international dialling
prefix) sign is displayed.
2. Enter the country code, followed by the area code
(without the leading zero) and the phone number,
and press D to dial.
Adding an Entered Phone Number to the
Phonebook
1. After entering a phone number, press [Options] and
select “Save Number”.
For details on creating a new entry, see “Adding a
New Phonebook Entry” on page 45.
Showing or Hiding My Phone Number on the
Display of the Called Party
1. After entering a phone number, press [Options],
select “Show My ID” or “Hide My ID” and press D
to dial.
Voice Call/Video Calling Functions
25
Speed Dialling
Answering a Voice Call
Up to 8 phone numbers from the Phonebook memory
(Handset and SIM/USIM) can be assigned to speed
dials. You can call the numbers using the digit keys
(G to O). The phone number of the Voicemail
centre is assigned to G.
For details on setting the speed dial list, see “Speed Dial
List” on page 53.
1. To dial a number using the speed dial, long press
any of the digit keys (G to O).
The phone number saved in the speed dial list is
dialled.
When an incoming call is detected, the phone rings.
1. Press D, B or press [Options] and select “Answer”
to answer the call.
Or press any key except F, [Options] or [Busy]
when the “Any Key Answer” function is enabled.
Set the Any Key Answer function in the profile of
each mode (p. 121).
You can answer an incoming call by sliding open
your phone if “Calls on Open” is set to “Accept
Call” in Slider Settings (p. 125).
Redialling
You can redial numbers in the call log. Select from
specific categories or “All Calls”. Specific categories
contain up to 30 numbers and the “All Calls” list
contains up to 90.
1. Press D in stand-by.
2. Select the category from “All Calls”, “Dialled
Numbers”, “Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial a voice call or long press D to
redial a video calling.
26
Voice Call/Video Calling Functions
Tip
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is displayed on
the screen. If the caller’s name and number are saved
in the Phonebook, the caller’s name is displayed on
the screen.
• If the number is a restricted number, the display
shows “Withheld”.
• When you receive a call from the person whose
picture is registered in the Phonebook, the picture
and name are displayed.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call
you do not wish to answer.
Letting the Caller Know You are Unavailable
Putting a Call on Hold
This function allows you to manage two calls at the
same time. If you wish to make another call while you
are talking to someone, you can put the current call on
hold to call someone else.
1. Press [Busy] while the phone is ringing to send a
busy tone to the caller.
In Call Menu (Voice Call)
Your phone has additional functions available while a
call is in progress.
Adjusting the Earpiece Volume
You can adjust the earpiece volume (and handsfree kit
volume, if connected) to five levels.
1. Press V or W to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call
or press W (or b/c) to decrease the volume.
3. Press B when the volume is set to the desired level.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it
is on.
1. During a call, press [Options] and select
“Loudspeaker On”.
Voice Call/Video Calling Functions
27
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another
call to, then press D.
Tip
• You can also make another call by entering the phone
number during a call instead of step 1. The current
call is automatically put on hold.
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select
“Messages”.
The following options are available: “Create
Message” to make an SMS and MMS, or “Inbox”,
“Sent” or “Drafts” to access these folders. For
details on SMS and MMS, see “SMS” and “MMS”
on page 70.
28
Voice Call/Video Calling Functions
Call Waiting
This service notifies you of another incoming call while
you have a call in progress.
1. During a call, press [Options] and select “Hold &
Answer” to answer the second call.
The first call is put on hold and you can now talk to
the second caller.
You can also answer the second call by pressing D.
Note
• You need to set “Call Waiting” to “On” if you wish
to use the Call Waiting service (p. 129).
• Call Waiting service may not be available on all
networks. Contact your service provider for more
information.
• If you do not wish to answer the second call, press
[Options] and select “Busy” in step 1. If “Reject” is
selected, the log of the second call is saved as a
missed call.
Conference Call
Conference call is a call with more than 2 participants.
You may include up to 5 participants in a conference
call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select
“Conference All” to join the conference call.
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the
2. Press F to end the conference call.
3. Press [Options] and select “Conference All” to join
Note
• The conference call service may not be available on
all networks. Contact your service provider for more
information.
• To end the call with all participants, press [Options]
and select “End All Call(s)”.
• To reject adding more participants to the current
party, press [Options] and select “Reject”, or you
can send the busy tone by selecting “Busy”.
• You have more options for the Conference call after
selecting “Conference All” in step 1:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on
hold, select “Private”.
To Add New Participants to the Conference Call
conference call and press D to dial.
the conference call.
If you wish to add other participants, repeat steps 1
to 3.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that
you wish to disconnect from the conference call.
2. Press [Options] and select “End This Call”.
Voice Call/Video Calling Functions
29
To Have a Private Conversation with One of the
Participants
If you wish to have a private conversation with one of
the participants, you may select the participant from the
conference list and put the other participants on hold.
1. During a conference call, select the person that you
wish to talk to.
2. Press [Options] and select “Private”.
3. Once you have finished the private conversation,
press [Options] and select “Conference All” to
return to the conference call.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].
Making a Video Calling
Note
• Video Callings can only be made and received if both
parties have 3G capable phones and 3G coverage.
See “Display Indicators” on page 22.
• Make sure that the battery is fully charged and the
signal is strong before using this function.
• Turn the loudspeaker on or use a handsfree kit so that
you can talk while looking at the video calling screen
on the display.
Making a Video Calling
To Make a Video Calling by Entering the Phone
Number First
1. Enter the area code and the phone number you wish
to dial.
2. Press [Options] and select “Video Calling” or press
S to dial.
If you enter the wrong number, press U to delete
the number to the left of the cursor.
When connected, the image of the called party is
displayed in the upper part of the screen and yours
in the lower left.
30
Voice Call/Video Calling Functions
Tip
• If the called party’s phone is not video calling
enabled, you can press F and enter the phone
number again to make a voice call.
Answering a Video Calling
When an incoming call is detected, the phone rings.
1. Press D to answer the call with video or press
[Options] and select “Hide Picture” to answer with
voice only.
If the slider is closed, you can answer the call (with
video) by sliding open the phone when the “Calls on
Open” function is enabled.
Tip
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is displayed on
the screen. If the caller’s name and number are saved
in the Phonebook, the caller’s name is displayed on
the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call
you do not wish to answer.
You can reject an incoming call by sliding close
your phone if “Calls on Close” is set to “End Call”
in Slider Settings (p. 125).
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a
busy tone to the caller of an incoming call letting
them know that you cannot answer the call.
In Call Menu (Video Calling)
Muting the Microphone
1. During a video calling, press [Mute].
To use the microphone again, press [Unmute].
Swapping Images
You can swap images between the main and sub
screens.
1. During a video calling, press [Options] and select
“Switch Images”.
Voice Call/Video Calling Functions
31
Changing the Image of Yourself
1. During a video calling, press [Options] and select
“Camera Picture”.
2. Select “Internal Camera”, “External Camera” or
“Alternative Image”.
“Internal Camera”:
The image through the sub
camera is displayed and sent
to the receiver.
“External Camera”: The image through the
camera is displayed and sent
to the receiver.
“Alternative Image”: The camera is turned off and
the image selected in
“Alternative Image” of
“Video Calling Settings” is
used.
Turning the Speaker On and Off
You can talk via the loudspeaker on the phone when it
is on.
1. During a video calling, press [Options] and select
“Loudspeaker On”.
Note
• In a high-noise environment, you may not be able to
continue a call, or make a clear call. We recommend
that you use the handsfree kit.
32
Voice Call/Video Calling Functions
• With this option, there may be interruption if you
increase the earpiece volume. We recommend that
you decrease the earpiece volume or use the
handsfree kit.
Video Calling Settings
To Adjust the Quality of the Incoming or Outgoing
Image
You can adjust the quality of the called party’s or
caller’s image.
1. During a video calling, press [Options] and select
“Video Calling Settings”.
2. Select “Incoming Picture Quality” or “Outgoing
Picture Quality”.
3. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
“Normal”:
“Quality Priority”:
The standard quality is used.
The quality of the picture
takes precedence over the
frame rate.
“Frame Rate Priority”: The frame rate takes
precedence over the quality.
3. Select “Always On”, “Always Off” or “As Normal
Setting”.
When “Always On” is selected, the backlight will
always be on during a video calling.
When “As Normal Setting” is selected, the
backlight will time out depending on the Backlight
setting (p. 124).
To Adjust the Video Exposure
1. During a video calling, press [Options] and select
“Video Calling Settings”.
2. Select “Exposure”.
3. Press a (Light) or b (Dark).
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1. During a video calling, press [Options] and select
“Video Calling Settings”.
2. Select “Backlight”.
Voice Call/Video Calling Functions
33
Mirror Image
During a video calling, you can reverse your image on
the sub screen.
1. During a video calling, press [Options] and select
“Video Calling Settings”.
2. Select “Mirror Image”.
3. Select “On” or “Off”.
To Change the Sub Camera Image to the
Alternative Image
During a video calling, you can switch the image shown
to the caller between the sub camera image and an
alternative image or display an image while putting a
call on hold from the saved picture files.
1. During a video calling, press [Options] and select
“Camera Picture”.
2. Select “Internal Camera”, “External Camera” or
“Alternative Image”.
If “Alternative Image” is selected, select “Preset
Picture” or “Picture Gallery”.
34
Voice Call/Video Calling Functions
Entering Characters
When entering characters to create Phonebook entries,
text messages or multimedia messages, etc., press the
corresponding keys.
In multi-tap input method, press each key until the
desired character is displayed. For example, press H
once for the letter A or twice for the letter B.
Long press the following keys to:
Enter 1 - 9 numbers.
G- O :
Q:
P:
R:
Enter space in Numeric mode or to
enter 0 in other modes.
Shift between multi-tap and T9 mode.
Display the language options screen.
Press the following keys to:
G:
Enter:
. (full-stop) , (comma) ? ! : ; ' (apostrophe) " / 1
Q:
Enter:
(space)+ = < > € £ $ ¥ % &0
P:
Switch character case among four modes:
Abc, ABC, abc and 123.
R:
Enter other characters.
Entering Characters
35
Changing the Input Language
1. On the text entry screen, press [Options] and select
“Input Language”.
Tip
• In T9 or multi-tap mode, you can switch input mode
as follows by pressing P.
English/T9 mode
2. Select the desired language.
Changing the Input Method
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the input method you wish to use.
Input
Method
Input
Language
= English
Input
Language
= Traditional
Chinese
Input
Language
= Simplified
Chinese
T9
Mode
T9 Abc
T9 ABC
T9 abc
T9 Stroke
T9 BoPoMoFo
T9 PinYin
T9 Stroke
Multi-tap
mode
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
Others
Symbol Table
Symbol Table
Symbol Table
36
Entering Characters
English/Multi-tap mode
Traditional Chinese/T9 mode
T9 English Mode
Using T9 English Mode
T9 text input method is a shortcut to enter text easily
and quickly.
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the T9 mode (T9 Abc, T9 ABC, T9 abc) you
wish to change. “
display.
” is displayed on the main
4. Press the keys to enter characters.
5. Press a or b to select the word you wish to input.
6. If you wish to clear the word, highlight it and long
press U.
7. Press B or select [Options] and “Done” to
complete the selection.
User Dictionary
You can create your own English words for T9
Alphabet text input.
Note
• This function is only available when “Input
Language” is set to “English”.
1. On the text entry screen in T9 mode, press [Options]
and select “User Dictionary”.
2. Select “Add New Word” and enter a new word.
To edit a word in the list
1. On the text entry screen in T9 mode, press [Options]
and select “User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
Tip
• If you press Q instead of step 6, a space is inserted
next to the selected word.
Entering Characters
37
T9 BoPoMoFo and T9 Stroke Mode
In T9 BoPoMoFo and T9 Stroke mode, keys are as follows.
T9 BoPoMoFo and T9 Stroke Mode keys
Key
G
H
I
J
K
L
M
N
O
P
Q
R
38
BoPoMoFo
Stroke
G -O :
P:
R:
Wildcard
Space
Go to the FullWidth Symbols screen.
Entering Characters
Long press to input corresponding
Chinese character displayed in the
candidate field.
Press to change the input method.
Long press to enter tones
“
” in T9 BoPoMoFo
mode.
Press to display the FullWidth
Symbols screen.
Long press to display the Input
Language screen.
Changing the Input Method between Stroke
and BoPoMoFo
See “Changing the Input Method” on page 36.
Using BoPoMoFo Input Mode
Input field
Long press the
corresponding numeric
key to select the desired
character directly from
the Candidate field.
The following is an example of entering “
“
”.
1. Press J, Q, and M (2
times quickly) to enter reading.
The candidates with the same
reading are displayed in the
Candidate field.
” for
2. Long press K if the desired
character is displayed.
Candidate field
3. Repeat steps 1 and 2 to complete messages.
Entering Characters
39
Tip
• When the cursor is placed after the first character,
the Candidate field displays characters most likely to
follow.
• If you want to use tone options,
long press P instead of step 2
to display the desired character.
The tone symbols are displayed
in the Candidate field.
The candidates are displayed.
Press the corresponding
numeric key (H).
Using Stroke Mode
The following is an example of entering “
1. Change the input mode to T9
Stroke mode.
”.
2. Press I G J to display
the corresponding stroke for
“ ”.
3. Long press M to complete the selection.
40
Entering Characters
Chinese User Dictionary
Deleting a Word
You can create your own word list for T9 traditional
Chinese input.
You can enter Chinese characters, alphabet, symbols
and numbers.
Note
• This function is only available when “Input
Language” is set to “Traditional Chinese”.
Creating a New Entry
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Delete”.
4. Press [Yes] or [No].
2. Select “Add New Word”.
3. Enter new word.
Editing a Word in the List
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the entry word.
Entering Characters
41
Finding an Entry
You can recall Chinese word entries by entering the
first few characters.
The following is an example from the Chinese User
Dictionary.
Please notice the word
is already
stored at this example.
1. Press L (3 times quickly),
This example is
then long press G and enter using BoPoMoFo
mode
“ ”.
2. The character “ ” appears at
.
Normally “ ” appears here.
3. Long press O and enter
“
42
”.
Entering Characters
4. Long press O, then the
following characters appear.
Note
• This function doesn’t appear, if the entry word was
made by less than 4 letters or no Chinese characters
included.
Though, you can use this as a shortcut if the word was
created by Chinese character, since candidate
character appears at so you only have to press O
without searching for following characters.
• If there were a stored word which shares the first 1-4
character such as “
”, candidate “ ”
appears at or .
The latest entry comes to , and if there were three
or more entry starts with “ ”, old candidate
disappears.
• If there were a stored word which shares the first 5 or
more characters, such as “
”, after
“ ” was entered, the latest character of entry
completes.
Using Templates
You can use the phrases registered in Text Templates
when entering characters.
For details on creating the text template, see “Adding
Phrases to Text Templates” on page 91.
1. On the text entry screen, move the cursor to the
point you wish to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select
“Advanced”.
6. Press [Options] and select “Advanced”.
7. Select “Paste”.
Insert Phonebook Entries
You can insert the entries registered in Phonebook
when entering characters.
For details on creating the Phonebook entries, see “Call
Manager” on page 45.
1. On the text entry screen, move the cursor to the
point you wish to insert the Phonebook Entry.
2. Press [Options] and select “Advanced”.
3. Select “Insert Phonebook Entry”.
4. Select the desired Phonebook Entry.
The selected entry is inserted.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to
be cut, then press B.
4. Move the cursor to the last letter to highlight the
area, then press B.
5. Move the cursor to the point you wish to paste the
letters.
Entering Characters
43
Using the Menu
Main Menu
1. Press B in stand-by.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired
menu, then press B to access the function.
For details on the menu options, see “List of Menu
Functions” on page 8.
44
Using the Menu
Shortcut Keys
You can access menus by pressing B and digit keys for
the corresponding number on the Main menu. For
numbers 10 to 12, press B and P (10), Q (11) or
R (12). For menus with tabs, press d (or c when
necessary) to select the desired tab before pressing the
digit keys. See “List of Menu Functions” on page 8.
Shortcuts are listed in the headings of this user guide.
Example (p. 53): To Access “Manage Groups” Sub
Menu
Manage Groups (M 8-d-d-1)
“Call Manager” → “Phonebook Settings” tab →
“Manage Groups”
Press B N and d twice for the “Phonebook
Settings” tab, then press G.
Example (p. 106): To Access “Tasks” Sub Menu
Tasks (M 3-4)
Press BIJ.
Note
• The shortcut keys work for the first three menu levels
only.
Call Manager (M 8)
You can store the phone numbers and Email addresses
of your friends, family and colleagues in the
Phonebook.
Your phone can store up to 750 entries. For each entry,
you can enter information including up to 3 phone
numbers and 3 Email addresses. There is a limit to the
number of characters that can be entered for each item.
The character limit differs for the handset memory and
SIM/USIM card memory.
Adding a New Phonebook Entry
The amount of phone numbers that you can store to the
SIM/USIM card is dependent on its capacity. Contact
your service provider for details.
Selecting the Storage Memory (M 8-d-d-3-2)
You can choose either the phone or SIM/USIM card
memory locations to store the new entry.
“Call Manager” → “Phonebook Settings” tab →
“Phonebook Settings” → “Save to”
1. Select from “Handset”, “SIM” or “Choice”.
If the selected location is different from the list
displayed, a confirmation message is displayed.
Tip
• “Choice” prompts you to choose the memory every
time you save a new entry.
Registering a New Entry (M 8-2)
“Call Manager” → “Phonebook” tab → “Add New”
If you select the “Choice” option for the memory to be
used, the selection is between “To Handset” and “To
SIM”.
1. Select the field you wish to fill in, and enter the
relevant information.
2. Press [Save], when finished.
Tip
• To create an entry, at least one field must be filled
(“Last Name”, “First Name”, “Add Phone Number”
or “Add Email Address” for the handset memory;
“Name”, “Add Phone Number” or “Add Email
Address” for the USIM memory; “Name” or “Add
Phone Number” for the SIM memory).
Call Manager
45
Saving an Unregistered Number (M 8-d-d-3-5)
After the call ends, you can have the confirmation
screen asking you if you wish to register the number to
the Phonebook.
“Call Manager” → “Phonebook Settings” tab →
“Phonebook Settings” → “Save Unregistered”
1. Select “Incoming Call” or “Outgoing Call”.
2. Select “On” or “Off”.
Registering My Card (M 8-3)
You can register and edit your own contact as with
other Phonebook entries.
“Call Manager” → “Phonebook” tab → “My Card”
Searching for an Entry
You can search for the desired entry by entering the first
few letters of the name or by sorting the entries.
Changing the List Displayed (M 8-d-d-3-1)
“Call Manager” → “Phonebook Settings” tab →
“Phonebook Settings” → “Source”
1. Select from “Handset”, “SIM” or “Both”.
If the selected location is different from the
Phonebook storage memory, a confirmation
message is displayed.
46
Call Manager
Finding a Name
“Call Manager” → “Phonebook” tab →
“Phonebook”
1. Enter the first few letters of the name.
The first name corresponding to the entered letters
is highlighted.
Tip
• You can select the Phonebook location from
“Handset”, “SIM” or “Both” before searching.
Sorting the Phonebook Entries (M 8-d-d-3-3)
When Simplified Chinese is selected, you can change
the listing order of the Phonebook entries to PinYin
order or by different groups.
When another language is selected, you can change the
listing order of the Phonebook entries to BoPoMoFo
order or by different groups.
“Call Manager” → “Phonebook Settings” tab →
“Phonebook Settings” → “View Phonebook”
1. For Simplified Chinese, select “By PinYin” or “By
Group”. For another language, select “By
BOPOMOFO” or “By Group”.
Selecting the Search Mode (M 8-d-d-3-4)
“Call Manager” → “Phonebook Settings” tab →
“Search Mode”
1. For Simplified Chinese, select “English Search”,
“PinYin Search” or “Character Search”. For another
language, select “English Search”, “BOPOMOFO
Search” or “Character Search”.
Dialling from the Phonebook
“Call Manager” → “Phonebook” tab →
“Phonebook”
1. Highlight the desired entry and press D (voice call)
or long press D (video calling).
Tip
• If more than one phone number is registered for the
entry, highlight the desired phone number after step
1 and press D (voice call) or long press D (video
calling).
• You can also dial from the details screen of the
Phonebook. On the details screen, select the desired
phone number and press D (voice call) or long press
D (video calling).
Dialling a Service Phone Number (M 8-d-3)
Certain SIM/USIM cards contain service phone
numbers that can be dialled. Contact your SIM/USIM
card vendor for more information. On the Phonebook
screen, “Service Dialling No.” is displayed at the
bottom of the list.
“Call Manager” → “Services” tab → “Service
Dialling Number”
1. Select the desired service phone number.
Tip
• If the SIM/USIM card contains only one service
phone number, you can dial it in step 1 by pressing
B.
• If no service phone number is stored in the SIM/
USIM card, this menu is not selected.
Fixed Dialling Numbers (M 8-d-4)
This option is available on most SIM/USIM cards for
mobile phones. It allows you to configure a SIM/USIM
card so that it can only be used to make calls to numbers
on a predefined list.
Note
• This service depends on the SIM/USIM card.
Call Manager
47
To Enable Fixed Dialling Numbers
“Call Manager” → “Services” tab → “FDN”
1. Enter your PIN2 code.
2. Select “Switch On/Off”.
3. Select “On” to enable this function.
To Add a New Name
“Call Manager” → “Services” tab → “FDN”
1. Enter your PIN2 code.
2. Select “Edit Dial List”.
3. Highlight an entry, press [Options], then select
“Add New”.
4. Add a name and a phone number.
For details on adding a name and phone number, see
“Adding a New Phonebook Entry” on page 45.
5. Press [Save].
Sending a Message from the
Phonebook
“Call Manager” → “Phonebook” tab →
“Phonebook”
1. Select the desired entry including the phone number
or Email address you wish to use.
48
Call Manager
2. Highlight the desired phone number or Email
address.
3. Press [Options] and select “Create Message”.
For further procedures, see “Creating a New
Message” on page 71.
Sending a Voice Clip Message or Video
Clip Message Using an Address from the
Phonebook
“Call Manager” → “Phonebook” tab →
“Phonebook”
1. Select the desired entry including the phone number
or Email address you wish to use.
2. Highlight the desired phone number or Email
address.
3. Press [Options] and select “Create Message”.
For further procedures, see “Creating a New
Message” on page 71.
Using Mailing Lists (M 8-d-d-2)
You can create a mailing list to send the same message
to a group of recipients at once. Up to 5 groups can be
registered.
To Create a New Mailing List
“Call Manager” → “Phonebook Settings” tab →
“Message Groups” → “Add New Group”
1. Enter the group name.
The new group name is displayed following the last
group on the Group List screen.
To Add Recipients to a Group
Up to 20 recipients can be registered in each list.
“Call Manager” → “Phonebook Settings” tab →
“Message Groups”
1. Highlight the desired group name.
2. Press [Options] and select “View”.
3. Select “Assign New Entry”.
4. Select the desired entry.
Tip
• If you modify the entry assigned in the group, you
need to re-assign it to the group. Highlight the entry,
press [Options], then select “Re-assign Entry” in
step 3.
• To remove an entry from the group, highlight the
entry, press [Options], then select “Remove Entry”
in step 3.
• To remove a group, highlight a group name and
press [Options] and then select “Delete” in step 2.
To Send a Message Using a Mailing List
“Call Manager” → “Phonebook Settings” tab →
“Message Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
For further procedures, see “Creating a New
Message” on page 71.
The detailed screen is displayed.
5. Select the desired phone number or Email address.
Call Manager
49
Editing Phonebook Entries
“Call Manager” → “Phonebook” tab →
“Phonebook”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
Adding a Thumbnail to Entries
Only Phonebook entries saved to the handset can have
Thumbnails attached to them.
“Call Manager” → “Phonebook” tab →
“Phonebook”
1. Highlight the desired entry.
2.
3.
4.
5.
6.
Press [Options] and select “Edit”.
Select “Picture”.
Select “Assign Picture”.
Select the desired picture.
Press [Save] when finished.
Note
• If you delete a picture in the handset memory, the
corresponding thumbnail is also deleted.
• To store a picture right after it was taken, select
“Take Picture” in step 4.
50
Call Manager
Assigning a Ringtone or a Ring Video Clip to
Each Entry
“Call Manager” → “Phonebook” tab →
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Assign Tone/Video”.
4. Select “For Voice Call”, “For Video Calling” or
“For New Message”.
5. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 7.
6. Select “Preset Sounds” or “Sound Gallery”.
7. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video
clip, see “Assigning a Ringtone for an Incoming
Call” on page 117 or “Assigning a Ring Video Clip
for an Incoming Call” on page 118.
8. Press [Save] when finished.
Registering Birthday Item to Calendar
A birthday entered in a Phonebook entry can be
registered to the calendar.
“Call Manager” → “Phonebook” tab →
“Phonebook”
1. Highlight the desired entry.
2.
3.
4.
5.
Press [Options] and select “View”.
Press d to display the second tab.
Press b to highlight the birthday entry.
Press [Options] and select “Set Reminder”.
Tip
• After registration, the data in Calendar can be
customised. For details on customising a schedule
entry, see “To Change the Settings” and etc. on
page 101.
• If the Calendar memory is full, “Set Reminder” is not
displayed in step 5.
Deleting Phonebook Entries
Deleting All Phonebook Entries (M 8-d-d-4-3)
“Call Manager” → “Phonebook Settings” tab →
“Advanced” → “Delete All Entries”
1. Select from “Handset Entries”, “SIM Entries” or
“Both Entries”.
2. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
Deleting a Phonebook Entry
“Call Manager” → “Phonebook” tab →
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
Call Manager
51
Managing the Phonebook
Copying Phonebook Entries between SIM/
USIM Card and Handset (M 8-d-d-4-1)
“Call Manager” → “Phonebook Settings” tab →
“Advanced” → “Copy All Entries”
1. Select “From SIM to Handset” or “From Handset to
SIM”.
Note
• When you insert the SIM/USIM card into your phone
for the first time and start the Phonebook application,
the confirmation screen is displayed automatically,
asking you if you wish to copy or not. The number of
Phonebook entries to be copied varies depending on
the SIM/USIM capacity.
• If the memory space is not enough to save all entries,
you cannot complete copying.
Sending a Phonebook Entry
“Call Manager” → “Phonebook” tab →
“Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Send Phonebook”.
3. Select “As Message” or “Via Bluetooth”.
For “As Message”
For details, see “MMS” on page 70.
For “Via Bluetooth”
For details, see “Bluetooth” on page 142.
Receiving a Phonebook Entry
When the phone receives a Phonebook entry, a
confirmation message is displayed in stand-by.
1. Press [Yes].
The received entry is saved in the Phonebook. Press
[No] to reject.
Tip
• For details on entering Bluetooth wireless settings,
see “Connectivity” on page 142.
52
Call Manager
Manage Groups (M 8-d-d-1)
Different ringtones can be set for each category. If you
do not change a category ringtone, the ringtone
assigned in the Profiles menu is used.
“Call Manager” → “Phonebook Settings” tab →
“Manage Groups”
1. Highlight the desired category.
2. Press [Options] and select “Assign Tone/Video”.
3. Select “For Voice Call”, “For Video Calling” or
“For New Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “Sound Gallery”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video
clip, see “Assigning a Ringtone for an Incoming
Call” on page 117 or “Assigning a Ring Video Clip
for an Incoming Call” on page 118.
Editing the Category Name
You can edit category names to be assigned to the
Phonebook entries.
“Call Manager” → “Phonebook Settings” tab →
“Manage Groups”
1. Highlight the desired category name.
2. Press [Options] and select “Edit Name”.
3. Modify the name.
Speed Dial List (M 8-d-2)
You can set a maximum of 8 phone numbers in the
Speed Dial list (p. 26).
Setting Phonebook Entries in the Speed Dial
List
“Call Manager” → “Services” tab → “Speed Dial
List”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Options] and select “Assign”.
4. Select the desired location.
Tip
• The nine digit keys (G - O) correspond to Speed
Dial list numbers.
• When the list is empty, select “Assign” in step 1.
Call Manager
53
To Edit the Speed Dial List
“Call Manager” → “Services” tab → “Speed Dial
List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Re-Assign” (or
“Assign”).
Memory Status (M 8-d-d-4-2)
This function helps you to check the memory used in
the Phonebook.
“Call Manager” → “Phonebook Settings” tab →
“Advanced” → “Memory Status”
54
Call Manager
Audiovisual (M 7)
• Pressing Q displays this help information.
Video Player (M 7-1)
Searching a File to Be Played Back
T → “Video Player” → “My Videos”
1. Select “All Videos” or the desired playlist.
Playing Back Video Clip Files (M 7-1-2)
T → “Video Player” → “My Videos”
1. Select “All Videos” or the desired playlist.
2. Select the desired file.
To pause playback, press B.
To stop playback, press U.
Tip
• You can control the Video Player by using the
following keys:
a/b: Increases or decreases the volume.
b (long press): Mutes.
d: Jumps to the next file.
c: Returns to the start of the current file.
cc: Jumps to the previous file.
d (long press): Fast-forwards.
c (long press): Rewinds.
The side keys are always available to change the
volume level.
• Pressing H changes the size of the video display in
the following order: Original, Enlarged, Full Screen,
Original and so on. Note that this does not change the
Display Size setting.
2. Press [Options] and select “Search”.
3. Enter a few letters of the title.
Search results are displayed in alphabetical order
and the matching file is highlighted. The search will
match the entered text with any part of the title.
Adding a File to the Playlist
You can add files to a playlist by doing the following.
T → “Video Player” → “My Videos”
1. Select “All Videos” or the desired playlist.
2. Highlight the file you wish to add to the playlist.
3. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a
playlist, see “Adding a New Playlist” on page 56.
4. Select the desired playlist.
The file highlighted in step 3 is saved.
To delete files from the playlist, highlight the file in
the playlist and press [Options]. Then select “Delete
from Playlist”.
Audiovisual
55
Adding a New Playlist
You can create a playlist and register desired files in it.
T → “Video Player” → “My Videos”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
3. Press B.
Note
• To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
Settings
You can select a play mode for “Playback Pattern”,
“Backlight”, “Display Size” and “Sound Effect” when
playing back video clip files.
T → “Video Player” → “Settings”
1. Select from “Playback Pattern”, “Backlight”,
“Display Size” or “Sound Effect”.
2. Select from the following:
• “Playback Pattern”
“Normal”:
Plays back all files in the
selected folder once and
stops playback.
“Repeat”:
Continues playback of
selected file in the selected
folder.
56
Audiovisual
“Repeat All”:
“Random”:
Plays back all files in the
selected folder.
Plays back files in the
selected folder at random.
• “Backlight”
“Always On”:
Lit while the file is played
back.
“Always Off”:
Unlit while the file is played
back even if a key is pressed.
“Normal Settings”: Works with the main
backlight setting (p. 124).
• “Display Size”
“Original Size”:
Displays the file in its
original size.
“Enlarge”:
Displays the file in an
enlarged size.
“Full Screen”:
Displays the file on the full
screen.
• “Sound Effect”
“Surround”:
Plays back file with
surround sound.
“Bass”:
Plays back file with
emphasised bass sound.
Downloading Video Clip Files (M 7-1-4)
T → “Video Player” → “Get Video”
The video clip file download site is displayed.
Playing Back the Video Clip Files
Music Player (M 7-3)
To Play Back the Last File (M 7-1-1)
T → “Video Player” → “Last Played Video”
Music Player supports MP3, MPEG-4 and 3GPP
format sound files. You can access other menus while
listening to sound files.
Streaming Player (M 7-2)
Creating a New Playlist
You can create your own playlist, storing and managing
your favourite tracks and the order of tracks.
T → “Music Player” → “My Music” → “Playlists”
1. Press [Options] and select “Add New Playlist”.
You can play back video clip files while downloading
them from the mobile network.
You can also register the address of the Web site as a
bookmark.
T → “Streaming Player”
1. Select “Last Played”, “Enter URL”, “Favourites”,
“Access Log” or “Settings”.
“Last Played”: Shows the last streaming file.
“Enter URL”: Enter the desired address of the
Web site. The browser opens,
starts downloading and plays back.
“Favourites”: The address of the Web site is
registered.
“Access Log”: Shows a log of the Web sites you
have accessed.
“Settings”:
The backlight and display size
settings.
2. Enter the desired playlist name.
Note
• To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
• You can create up to 99 playlists.
Audiovisual
57
Playing Back Sound Files
T → “Music Player” → “My Music”
1. Select the item you wish to play back.
• “All Music”:
All sound files are displayed.
• “Artists”:
The names of all artists are displayed.
When an artist is selected, all of their albums are
displayed.
When an album is selected, all of the sound files
in the selected album are displayed.
• “Albums”:
The names of all albums are displayed.
When an album is selected, all of the sound files
in the selected album are displayed.
• “Playlists”:
All playlists are displayed.
When any playlist is selected, all of the sound
files in the selected playlist are displayed.
2. Select the desired sound file.
To pause playback, press B.
To stop playback, press F and go back to stand-by,
then press F again. Select “Yes” when the pop-up
appears.
58
Audiovisual
Note
• Select “My Music” to update the list of available
music tracks.
• You are asked whether or not to play sounds when the
Silent mode is activated.
• To play the last played file, select “Last Played
Music”. “Currently Playing” is displayed when a file
is being played back.
• When you receive a call, playback of the current file
is paused, and you can receive the call. After the call
ends, the paused playback resumes automatically in
the background.
Tip
• You can return to the Main menu screen while
playing back the file in the background.
• You can create your playlist by listing only the
desired files (p. 57).
• Sound files in both the handset and the memory card
are displayed in a single view.
• When listening to music using an A2DP compatible
Bluetooth handsfree device, play back the file from
Music Player.
• You can select the playback pattern in step 2. Press
[Options] and select “Playback Pattern”.
“Normal”:
Plays back all files in the selected
folder once and stops playback.
“Repeat”:
Continues playback of selected file
in the selected folder.
“Repeat All”: Plays back all files in the selected
folder.
“Random”:
Plays back files in the selected folder
at random.
• While in the Music Player, the player can be
controlled by using the following keys:
a/ b : Increases or decreases the volume.
b (long press): Mutes.
d: Jumps to the next file.
c: Returns to the start of the current file.
cc: Jumps to the previous file.
d (long press): Fast-forwards.
c (long press): Rewinds.
F: Plays back the file in the background.
The side keys are always available to change the
volume level.
Sorting Files
T → “Music Player” → “My Music” → “All
Music”
1. Press [Options] and select “Sort”.
2. Select “By Title”, “By Artist”, “By Album” or
“By Genre”.
Sort results are displayed.
Adding a File to the Playlist
You can add files to a playlist by doing the following.
T → “Music Player” → “My Music” → “All
Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a
playlist, see “Creating a New Playlist” on page 57.
3. Select the desired folder.
The file highlighted in step 1 is saved.
To delete files from the playlist, highlight the file in
the playlist and press [Options]. Then select “Delete
from Playlist”.
Note
• You can store up to 99 files in one playlist. However,
the total number of files stored on your phone cannot
exceed 350 files.
Audiovisual
59
Downloading Music Files (M 7-3-3)
T → “Music Player” → “Download Music”
The music file download site is displayed.
Searching for Stations
T → “FM Radio”
1. Press [Options] and select “Search”.
FM Radio (M 7-4)
2. Select “Auto Search”.
3. Select “Search Upwards” or “Search downwards”.
You can connect to the FM Radio service.
Selecting a Radio Station
T → “FM Radio”
1. Press [Options] and select “Select Station”.
2. Highlight the desired radio station and press B.
Tip
• You can play back the program in the background.
Press [Options] and select “Play in Background”
while the program is played back.
• A headset radio aerial is necessary to use this
service.
Saving a Radio Station
T → “FM Radio”
1. Press [Options] and select “Save Station”.
2. Press [Options] and select “Assign”.
60
Audiovisual
Note
• You need to plug in the headset when using the FM
Radio.
Tip
• You can scan and save the stations automatically by
selecting “Update station list” in step 2.
• You can also select the desired station by entering the
frequency directly. Select “Enter Frequency” in step
2.
Setting FM Radio Playback
T → “FM Radio”
To Switch the Output
1. Press [Options] and select “Detailed settings”.
2. Select “Sound output settings”.
3. Select “Headset” or “Loudspeaker”.
To Activate the Auto Switch Off
1. Press [Options] and select “Detailed settings”.
2. Select “Auto Switch Off”.
3. Select the desired option.
To Switch between Stereo and Monaural
1. Press [Options] and select “Detailed settings”.
2. Select “Switch to Stereo”.
To Switch the Station List
1. Press [Options] and select “Detailed settings”.
2. Select “Switch station list”.
3. Select the desired list.
Audiovisual
61
Camera (M 5)
Your phone has a built-in digital camera that allows you
to take pictures and record video clips wherever you
are. This section starts with basic functions and
operational procedures to take, save and send pictures
and video clips, followed by common and unique
functions to camera and video modes.
Taking Pictures
“Camera”
1. Press B to take the picture.
The shutter sounds and the still image of the taken
picture is displayed.
2. Press [Save].
The taken picture is saved in Gallery.
To cancel, press [Cancel].
To send the taken picture, press B in step 2.
62
Camera
Note
• When the video camera is launched, press [Options]
and select “Go to Photo Camera”, or press c.
• When you try to send a picture that has too large a
file size, the picture size is resized for the message.
The original sized picture is saved in Gallery.
Tip
• You can activate the camera by long pressing X in
stand-by. Simply press X to take pictures, and start
and stop recording.
• You can lock the focus by pressing D or pressing
X halfway before taking a picture or recording a
video clip.
Recording Video Clips
You can record a video clip with your phone.
“Camera”
The preview is displayed on the screen.
When in photo camera mode, press d to switch to
video camera mode.
1. Press B.
2. To stop recording, press B.
3. Select “Save”.
The video clip is saved in Gallery.
To view the preview before saving, select
“Preview”.
To send the video clip, select “Save and Send”.
For further procedures, see “Creating a New
Message” on page 71.
Common Functions in the Photo and
Video Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. Press a or b.
Once the phone has returned to stand-by, the zoom
settings return to default.
Adjusting the Exposure
“Camera” → [Options] → “Exposure”
1. Press a (Bright) or b (Dark).
: (Bright → Normal → Dark)
Once the phone has returned to stand-by, the
brightness settings return to default.
Note
• You can only send video clips when “For Message”
is selected for the recording time. For details, see
“Selecting the Recording Time and Picture Size” on
page 69.
Camera
63
Selecting the Picture or Video Quality
Select the appropriate option.
“Camera” → [Options] → “Picture Quality”
“Camera” → [Options] → “Video Quality”
1. Select the desired picture or video quality.
: Super Fine
: Fine
: Normal
Note
• The better quality you select, the larger the file size
becomes.
Using the Self-Timer
Select the appropriate option.
“Camera” → [Options] → “Modes” → “Self-timer”
1. Select “2sec”, “5sec” or “10sec”.
When you select one of these options, the
corresponding indicator (“ ”, “ ”, or “ ”) is
displayed on the screen.
Select “Off” to cancel the self-timer.
64
Camera
Switching the Focus Mode
“Camera” → [Options] → “Modes” → “Focus”
1. Select the desired option.
: Auto Focus
: Manual Focus
: Macro
Switching the Display Direction
You can switch the display direction between portrait
and landscape.
“Camera” → [Options] → “Settings” → “Landscape
/Portrait”
Selecting the Storage Memory
Select the appropriate option.
“Camera” → [Options] → “Settings” → “Save New
Pictures”
“Camera” → [Options] → “Settings” → “Save New
Videos”
1. Select the desired location from “To Handset
Memory”, “To Memory Card” or “Choice”.
Note
• If you select “Choice”, select the desired location
every time you save.
Auto Save
You can set the phone to save pictures and video clips
automatically.
“Camera” → [Options] → “Settings” → “Auto Save”
1. Select “On” or “Off”.
Selecting the Anti-flicker Mode
“Camera” → [Options] → “Settings” → “Antiflicker”
1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.
Note
• Vertical stripes may occur on the picture due to the
light source. Change the anti-flicker mode to rectify.
Switching between the Photo and Video
Camera Modes
You can switch between the photo and video camera
modes by pressing c or d.
Select the appropriate option.
“Camera” → [Options] → “Go to Video Camera”
“Camera” → [Options] → “Go to Photo Camera”
You can also switch between the Internal (sub) camera
and External (main) camera.
Using the Help Function
“Camera” → [Options] → “Help”
Camera
65
Common Shortcut Keys
If multiple options exist, they switch each time you
press each of the following keys.
Photo Camera
Video Camera
D
Focus Lock
G
Zoom Max/Min
H Switches between internal and external cameras
I
Focus
J
Save New Pictures
K
Picture Size
Save New Videos
Picture Size
L
M
Microphone
Picture Quality
N
O
Q
Switches between Portrait and Landscape
Switches Viewfinder
between with and
without indicators
P
66
Video Quality
Self-timer
Switches the display
modes in the Preview
screen
Exposure
Camera
Note
• The “Switches the display modes” option is available
in “Preview” before you save a video clip. See
“Recording Video Clips” on page 63.
Functions in Photo Camera Mode
Selecting the Picture Size
You can select the size of pictures. All taken pictures
are saved in the JPEG format.
“Camera” → [Options] → “Picture Size”
1. Select the desired size.
(External Camera) 1200 × 1600 dots/
960 × 1280 dots/
768 × 1024 dots/480 × 640 dots/
240 × 320 dots/120 × 160 dots
(Internal Camera) 240 × 320 dots/120 × 160 dots
Continuous Shoot
There are various modes for taking continuous shots.
“Camera” → [Options] → “Modes” → “Continuous
Shoot”
1. Select the desired mode.
The following continuous shoot modes are
available:
“Off”:
The continuous shoots are
cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures
continuously.
After selecting this mode,
select from “Fast”,
“Normal”, “Slow” or
“Manual”.
“Overlapped” ( ): Overlaps continuous
pictures into one picture and
makes an afterimage.
After selecting this mode,
select “Fast” or “Normal”.
Note
• When you select “Manual” to take continuous
pictures, press B manually at the desired speed.
• When the Timer and Continuous Shoot functions are
simultaneously set, “ ” and “ ” (for “2sec” and
“4 Pictures”, for example) are alternately displayed.
• You cannot use the Continuous Shoot function for
picture sizes larger than 480 × 640 dots. “9
Pictures” and “Overlapped” are not available for
picture sizes larger than 240 × 320 dots.
Camera Effects
You can select from various camera effects.
“Camera” → [Options] → “Modes” → “Camera
Effects”
1. Select from “Sepia”, “Monochrome”, “Negative” or
“Sketch”.
Note
• You cannot use the Camera Effects function for
picture sizes larger than 240 × 320 dots.
Camera
67
Selecting a Frame
You can select the frame from preset patterns or Picture
Gallery.
“Camera” → [Options] → “Modes” → “Add Frame”
1. Select “Preset Frames” or “Picture Gallery”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press B.
Note
• Images larger than 240 dots [W] × 320 dots [H]
cannot be used.
Using the Full Screen
You can display the preview on the full screen without
the soft key area and indicator area.
“Camera” → [Options] → “Settings”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal
Viewfinder”.
68
Camera
Selecting the Shutter Sound
“Camera” → [Options] → “Settings” → “Shutter
Sound”
1. Select the desired shutter sound from 3 preset
patterns.
To play back the shutter sound, press [Play] in step
1.
Note
• Continuous Shoot uses the specialised shutter sound
that cannot be changed using the above settings.
• The shutter sound remains active even when
“General Volume” (p. 116) is set to “Silent” to
prevent unauthorised use.
Functions in Video Camera Mode
Selecting the Recording Time and Picture Size
“Camera” → [Options] → “Record Time”
1. Select “For Message” or “Extended Video”.
For Message ( ):
Limits the size to send a
message depending on
service providers.
Extended Video ( ): Less than 30 minutes
(depending on the
memory).
2. Select the desired picture size.
If “For Message” is selected, select “Large(QCIF)”
or “Small(SubQCIF)”.
If “Extended Video” is selected, select
“Large(QCIF)” or “Small(SubQCIF)”. When using
the external camera, “QVGA” is also available.
Note
• If you select “For Message” for the recording time,
the file size is limited depending on the service
provider. Therefore, the quality is also limited for the
setting.
• “Save and Send” is not displayed after recording in
the Extended Video mode.
Recording Video Clips with Sound
To record a video clip with sound, the microphone
needs to be activated.
“Camera” → [Options] → “Settings” →
“Microphone”
1. Select “On” or “Off”.
Note
• The microphone is already turned on in the default
setting. Select “Off” to record a video clip without
the sound.
• The file size of a video clip can be reduced if the
sound is not recorded.
Video Encoding
“Camera” → [Options] → “Settings” → “Video
Encode”
1. Select the appropriate format.
Note
• For videos, we recommend that you record in the
landscape display position (p. 64). If recorded in the
portrait display position, the video may be displayed
in a rotated position when viewed on a computer.
Camera
69
Messages (M 4)
Your phone allows you to send and receive text,
multimedia and Email. It is compatible with most POP3
Email providers.
SMS
SMS allows you to send text messages up to 70 Chinese
or 160 English characters. If the number of characters
used in a sent message exceeds this number, it is split
into several segments. As a general rule, if both Chinese
and English characters are used, one Chinese character
is counted as two English characters. (For punctuation
symbols and special symbols, the character count will
depend on whether it is full-width or half-width. When
the symbol is full-width, it is counted as 2 English
characters or 1 Chinese character. When the symbol is
half-width, it is counted as 1 English character.) For
example, if a message contains more than 200 Chinese
characters, it is sent as 3 SMS messages.
70
Messages
Long SMS
The WX-T82 supports Long SMS to allow you to send
text messages up to 330 Chinese or 765 English
characters. If the number of characters used in a
message exceeds this number, it is automatically
delivered by MMS and the charge for an MMS is
applied.
MMS
With MMS, you can send images, sound or video to
brighten someone’s day. Messages of up to 300 KB
with images, sound, or video clips can be sent and
received.
Email
Email allows you to send messages of up to 300 KB.
Note
• Some MMS functions may not always be available
depending on your network. Contact your service
provider for more information.
• Maximum message size varies depending on the
restrictions set by the service provider.
Creating a New Message (M 4-1)
(SMS/MMS)
“Messages” → “Create Message” → “Message”
(Email)
“Messages” → “Create Message” → “E-Mail”
1. Select the recipient field.
2. Select the desired method to enter the recipient’s
details.
3. For MMS, enter or select the Email address or
phone number from the Phonebook. For SMS, enter
or select a phone number. For Email, enter or select
an Email address.
• To add multiple Email addresses or phone
numbers, highlight the recipient field, press
[Options], and then select “Add Recipient”.
Enter or select the Email address or phone
number from the existing Phonebook.
• To change the recipient types, press [Options],
select “Add Recipient” and highlight the desired
recipient. Press [Options] and select “Change to
To”, “Change to Cc” or “Change to Bcc”.
• To add a subject, highlight the subject field and
press B. Then enter the subject in the subject
entry screen and press B.
4. Place the cursor in the message field.
5. Press B to display the message entry screen.
Enter the message and press B.
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
After the message is sent, the message is moved to
the Sent box.
Note
• When you create an SMS/MMS message, the mode is
automatically switched to MMS in the following
cases:
• When “Enter Email Address” in [Options] is
selected for recipient fields.
• When a subject is entered.
• When the size of entered text has exceeded the SMS
size limit.
Tip
• To send the same message to a group of recipients,
select “Select Message Group” in step 2, then select
the desired group name. For details on creating a
mailing list, see “To Create a New Mailing List” on
page 49.
Messages
71
To Add a Slide Show
1. Perform steps 1 to 5 in “Creating a New Message”
on page 71.
2. Press a to highlight your message or other inserted
item such as a picture or sound file.
3. Press [Options] and select “Add Slide”.
4. Select “Add Slide After” or “Add Slide Before”.
5. Enter another message.
If you wish to set the duration of each slide,
highlight your message or other inserted item such
as a picture or sound file. Press [Options] and select
“Slide Duration”, then select the desired duration.
Repeat steps 2 to 4 to add more slides.
Tip
• You can create messages up to 300 KB. Each slide
can contain one picture and/or one sound file or
video clip.
To Attach Data
1. In step 6 in “Creating a New Message” on page 71,
press [Options] and select “Insert Item”.
72
Messages
2. Select “Picture”, “Sound”, “Video”, “Attach
Contact”, “Attach Appointment” or “Others”.
When selecting “Attach Contact” or “Attach
Appointment”, go to step 4.
3. Select the desired option and then select the desired
file.
If you wish to attach pictures, sounds or video clips
that are saved, select “Saved Picture”, “Saved
Sound” or “Saved Video”.
If you wish to take new pictures, record sounds or
video clips, select “Take Picture”, “Record Voice”
or “Record Video”.
4. Select the desired data.
If you wish to select your own Phonebook entry,
select “My Card”.
When attaching an appointment, select the desired
day including a schedule entry you wish to add and
select the desired schedule entry.
Note
• When attaching JPEG files, select the appropriate
resize option, as the maximum message size for
sending varies depending on the service provider.
To Remove or Replace Attachments
1. In step 6 in “Creating a New Message” on page 71,
press [Options] and select the corresponding
remove option for each attachment.
Using the Sending Options
You can use the message sending options for each type
of message.
1. Press [Options] and select “Messaging Settings”.
• “Delivery Report” (“On”, “Off”) (SMS/MMS):
Enables or disables Delivery Report when the
message is successfully sent to the recipient.
• “Expiry Time” (“Maximum”, “1 hour”, “12
hours”, “1 day”, “1 week”) (SMS/MMS): Sets
Expiry Time for a message to be saved in the
server.
• “Priority” (“High”, “Normal”, “Low”):
Prioritises composed messages.
• “Read Report” (“On”, “Off”) (SMS/MMS):
Confirms whether or not a report is sent notifying
the sender that the message has been read.
2. Press [Options] and select “Send”.
After the message is sent, the message is moved to
the Sent box.
Note
• The current message size displayed while you are
creating the message is an approximation.
• If a message cannot be sent for some reason, the
message stays in the Outbox and the “ ” is
displayed in stand-by.
Tip
• To save the message without sending, press
[Options] and select “Save to Drafts” in step 4 in
“Creating a New Message” on page 71.
• You can send the following items attached to
multimedia messages. Details are given in the
following sections.
• Gallery data
• Phonebook entry
• Schedule entry created by Calendar, etc.
• You can use the template option to help you compose
messages. For details on using this option, see
“Using Templates” on page 43.
Messages
73
Sending a Message in the Drafts Box (M 4-4)
“Messages” → “Drafts”
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Sending a Voice Clip Message or Video Clip
Message
You can record a new voice or video clip when creating
a new message.
Select the appropriate option.
“Messages” → “Create Message” →
“Voice Message”
“Messages” → “Create Message” →
“Video Message”
1. Press B to start recording.
2. Press B to stop recording.
3. Select “Accept” to attach to the new message.
74
Messages
4. Select “To Handset Memory” or “To Memory
Card” as the destination to save.
For further procedures, see “Creating a New
Message” on page 71.
Tip
• You can play back voice or video clips from Gallery.
Reading a Message
Messages you receive are saved in the Inbox.
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Select the message you wish to view.
Storing the Phone Number of a Sender in the
Phonebook
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message from which you wish to store
the phone number or Email address.
3. Press [Options] and select “Save Address”.
The new Phonebook entry screen including the
phone number is displayed. For details on creating
a new Phonebook entry, see “Adding a New
Phonebook Entry” on page 45.
Calling the Phone Number of a Sender
Embedded in the Message
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message containing the phone number
you wish to dial.
3. Press [Options] and select “Call Sender”.
Downloading a Single MMS
“Messages” → “Inbox”
1. Select the SMS/MMS tab.
2. Highlight the message alert (
) you wish to
download.
3. Press [Options] and select “Download”.
Tip
• You can download multiple messages at the same
time. See “Downloading Multiple MMS”.
Downloading Multiple MMS
“Messages” → “Inbox”
1. Press [Options] and select “Multiple Select”.
2. Select the desired message alerts, press [Options]
and select “Select” or “Select All”.
3. Press [Options] and select “Download”.
The selected messages are downloaded at the same
time.
Messages
75
Replying to a Message or to All Addresses
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
Sorting the Messages in the List
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message the sender of which you wish
2. Press [Options] and select “View Settings”.
3. Select “Sort”.
4. Select the desired sort option.
to reply to.
3. Press [Options] and select “Reply” (to sender only)
or “Reply All” (to all other recipients listed in the
original To or Cc lists).
4. Select “Reply” or “Reply with History”.
5. Enter the message.
6. Press [Options] and select “Send”.
“Send” is not available when no recipients are set.
Forwarding a Message
“Messages” → “Inbox”
1. Select the desired tab, SMS/MMS or Email.
2. Highlight the message you wish to forward.
3. Press [Options] and select “Forward”.
4. Perform steps 1 to 5 in “Creating a New Message”
on page 71.
76
Messages
Cell Broadcasts (M 4-9)
You can receive cell broadcast messages or general
messages such as weather forecasts and traffic reports.
This information is broadcast to subscribers in certain
network areas.
This function may not be available on all mobile phone
networks. Contact your service provider for more
information.
Enabling/Disabling Cell Broadcasts
“Messages” → “Cell Broadcasts” → “Switch On/
Off”
1. Select “On” or “Off”.
Reading Cell Broadcast Messages
“Messages” → “Cell Broadcasts” → “Read
Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press U.
Setting Languages for Cell Broadcast
Messages
“Messages” → “Cell Broadcasts” → “Settings” →
“Language”
The current language is displayed.
1. Press B to check.
2. Press [Save].
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you
want.
“Messages” → “Cell Broadcasts” → “Settings” →
“Set Info Subjects”
1. Press [Options] and select “Add/Remove”.
2. Select the desired subject.
3. Press [Save].
Tip
• If the desired subject is not in the list that appears in
step 2, select “Create Subject” in step 1, then enter
the subject code to add a page. For details on the
subject code, contact your service provider.
Messages
77
Area Info (M 4-10)
Messaging Settings (M 4-11)
The Area Info is the message information that operators
send to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed in stand-by.
General Settings
“Messages” → “Messaging Settings” →
“General Settings”
1. Select the item you wish to set up.
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit”
to edit current signature.
• “Auto Delete”:
Deletes the oldest message automatically, when
the Inbox, Sent or Both (Inbox and Sent) is full.
• “Message List View”:
Switches the mailbox listing (“Two-line”, “Oneline”).
• “Scroll Unit”:
Scroll through messages by “Single Line”, “Half
Page” or “Whole Page”.
• “Message Type”:
Sets the type of message to send by default when
a message is composed. When set to “Free”, the
message is sent automatically either as an SMS or
MMS as appropriate.
Enabling/Disabling Area Info
“Messages” → “Area Info”
1. Select “On” or “Off”.
Note
• This function may not be available on all mobile
phone networks. Contact your service provider for
more information.
• If Area Info is set to “On”, the stand-by time will
decrease.
78
Messages
SMS Settings
“Messages” → “Messaging Settings” →
“SMS Settings”
1. Select the item you wish to set up.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit”
to edit current signature.
• “Automatic Resend”:
Tries to resend the failed SMS/MMS message up
to two times (“On” or “Off” selection).
• “Expiry Time”:
This indicates the number of days and hours for
which a message you send may remain
undelivered to the message recipient. During this
period, the message service centre will
continually try to deliver the message to the
recipient.
• “Message Centre”:
Enter the message centre number. Up to 2
numbers can be registered.
If you wish to enter a country code for a message
to an international number, long press Q until a
+ sign is displayed.
• “Message Format”:
Sets the message format to be used when creating
a new message.
• “Reply Path”:
Enables or disables adding a reply path to the
message.
• “Optimisation”:
When set “On” (default), double-byte characters
such as European characters with an accent are
converted into single-byte characters and sent.
When “Off”, double-byte characters are sent as
displayed.
Please note that you may be charged double for
double-byte characters sent in an SMS when
Optimisation is set “Off”.
• “Connection Type”:
Sets the preferred connection type (“GPRS
Preferred”, “CSD Preferred”).
Messages
79
MMS Settings
“Messages” → “Messaging Settings” →
“MMS Settings”
1. Select the item you wish to set up.
• “MMS Accounts”:
Select the desired account or select “Create New”
to enter the following settings.
“Profile Name”:
MMS profile name
(Unique name)
“Proxy”:
Proxy setting for MMS
“Relay Server URL”: MMS relay server
• “Home Download”:
Controls the message download timing inside
your network area.
“Always Download”: Downloads messages
immediately from the
server.
“Always Defer”:
Defers message download.
80
Messages
• “Roaming Download”:
Controls the message download timing when
roaming outside of your network.
“Always Download”: Downloads messages
immediately from the
server.
“Always Defer”:
Defers message download.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Signature”:
Enables or disables “Auto Insert”. Select “Edit”
to edit current signature.
• “Automatic Resend”:
Tries to resend the failed SMS/MMS message up
to two times (“On” or “Off” selection).
• “Delivery Report Allow”:
Confirms whether or not a report is sent notifying
the sender when you receive a message.
• “Read Report”:
Enables or disables Read Report request.
• “Read Report Allow”:
Enables or disables Read Report Allow when the
recipient is required to inform the sender that the
message has been read.
• “Expiry Time”:
This indicates the number of days and hours for
which a message you send may remain
undelivered to the message recipient. During this
period, the message service centre will
continually try to deliver the message to the
recipient.
• “Slide Duration”:
Sets the duration of the slide.
• “Slide Auto Play”:
Enables or disables Slide Auto Play.
• “Send File Settings”:
Sets whether or not to send and save the file
settings.
• “Max Message Size”:
Sets the maximum message size for sending and
disables sending MMS messages exceeding that
size.
• “Creation Mode”:
When set to “Free”, you can attach files of any
format to the mail. When set to “Restricted”, only
certain formats and message sizes can be
attached. The “Restricted” setting has priority
over “Max Message Size”.
• “Emoticons”:
Enables or disables the Emoticons when entering
text.
• “Hide Number”:
Sets whether to show or hide the sender’s
address.
• “Delivery Time” (“Immediate”, “1 hour”, “12
hours”, “1 day”, “1 week”):
Sets the time the message is delivered after the
Send key is pressed.
• “Anonymous Rejection”:
Enables or disables the rejection of messages
from anonymous senders.
To Activate the MMS Account Profile
1. Select “MMS Accounts”.
2. Select the desired profile you wish to activate.
Messages
81
Email Settings
“Messages” → “Messaging Settings” →
“Email Settings”
To Set an Email Account
1. Select “Email Accounts” and highlight the preset
Email account.
You can also create a new account.
2. Press [Options] and select “Edit”.
3. Select the item you wish to set up.
“Account Name”:
“Incoming Server”:
“Outgoing Server”:
“Access Point”:
“Email Address”:
82
Messages
Email account name
(Unique name)
Server name, user ID,
password, port number,
APOP authentication and
encryption for the incoming
server
Server name, user ID,
password, port number,
SMTP authentication and
encryption for the outgoing
server
Access point for Email
Email address
“Advanced Settings”: Your name, signature,
download interval,
download configuration,
maximum download limit,
save sent messages
To Activate the Email Account Profile
1. Select “Email Accounts”.
2. Select the desired profile you wish to activate.
FET Mobile Internet (M 2)
Your phone is already configured to access FET Mobile
Internet.
FET Mobile Internet is a new mobile internet portal
which is your gateway to a new world of information,
games, music and services.
Because your phone uses 3G (UMTS), it has a system
that is faster than previous ways of getting mobile
information. Also, the connection is ‘always on’ which
means there is no need to wait for dialling up. You only
have to pay for the data you send or receive, not how
long you’re connected.
Your phone contains a WAP browser used for surfing
on the Mobile Internet, where you can get a lot of useful
information. Normally, pages are designed for a mobile
phone.
Your phone is already setup to FET Mobile Internet site
for WAP/MMS Settings.
Main Menu
“FET Mobile Internet” → “Homepage”
The FET Mobile Internet service page is displayed.
“FET Mobile Internet” → “Go to URL”
The URL entry screen is displayed. You can type in the
URL of a site directly.
“FET Mobile Internet” → “Bookmarks”
See page 84.
“FET Mobile Internet” → “Alert Inbox”
WAP Push alerts are displayed.
“FET Mobile Internet” → “My Saved Page”
You can view all the screenshots that have been saved
onto the handset memory.
“FET Mobile Internet” → “Access History”
The history of pages you have recently browsed is
displayed.
“FET Mobile Internet” → “Browser Settings”
See page 85.
FET Mobile Internet
83
Navigating a WAP or Web Page
• a b c d:
Moves the highlight around in the screen.
• A:
Launches the option menu if it has not
been launched.
Used to select an option from the option
menu.
• B:
Executes the highlighted item in the
screen.
• C:
Launches “FET Mobile Internet” by
opening the browser when in stand-by.
Moves to previous page when the browser
is active.
• F (short press):
Exits the browser.
(long press):
Turns off the phone.
84
FET Mobile Internet
Editing Bookmarks (M 2-3)
“FET Mobile Internet” → “Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following
options:
(When a bookmark is focused)
“Open”:
Selects a bookmark.
“Edit”:
Edits URL address of the
bookmark.
“Add New Bookmark”:
Creates new bookmarks.
“Create Folder”:
Creates new folders.
“Send via SMS”:
Sends the URL address to
recipients.
“Move”:
Moves bookmarks to
another location or into a
folder.
“Details”:
Displays detailed
information of the WAP/
web page.
“Delete”:
Deletes a bookmark.
“Delete All”:
Deletes all bookmarks.
(When a folder is focused)
“Select”:
Selects the folder.
“Add New Bookmark”:
Creates new bookmarks.
“Create Folder”:
Creates new folders.
“Move”:
Moves folder and
bookmarks in the folder to
another location.
“Rename Folder”:
Renames the folder.
“Delete”:
Deletes the folder and
bookmarks in the folder.
“Delete All”:
Deletes all folders and
bookmarks.
(When there are no bookmarks)
“Add New Bookmark”:
Creates new bookmarks.
“Create Folder”:
Creates new folders.
Browser Settings (M 2-7)
“FET Mobile Internet” → “Browser Settings”
“Font Size”:
Sets the font size for
browsing.
“Scroll Step”:
Sets the speed of scrolling.
“Send Referrer”:
Enables or disables the
notification of the referrer.
“Cookies”:
Adjusts the setting of
cookies.
“Downloads”:
Sets whether or not to show
images when accessing the
WAP/web page.
“Security”:
Adjusts the security prompt
level.
“WAP Push”:
Sets whether you need
confirmation for push
message.
“Download to”:
Sets the preferred download
location.
FET Mobile Internet
85
Browser Options when Online
You can use the various options of the browser.
C → [Options]
“Select”:
Selects a WAP page.
“Open This Frame”: Opens the selected frame.
(This option is available
only when a frame page is
displayed.)
“Home”:
Goes to the homepage.
“Forward”:
Goes to the next page.
“Reload Page”:
Reloads the WAP page to
get updated information.
“Bookmarks”:
See page 84.
“Save This Page”:
Saves the currently viewed
browser screenshots to the
handset memory.
“Save Items”:
Saves items from the
browsing pages.
“Go to URL”:
Allows you to type in the
URL of a site directly.
Handset browser will go to
the web/WAP page that you
entered.
86
FET Mobile Internet
“Access History”:
Shows the history where
you have browsed.
“Complete Page Display”:
Allows the browser to
display in complete page
mode or Virtual Screen
mode.
“Zoom In/Out”:
Zooms in on or out from the
browsing page. This option
is available only when
“Complete Page Display” is
set to “ON”.
“Advanced”:
Displays the advanced
option menu of the browser.
“Help”:
Displays the browser help.
“Exit”:
Exits the browser.
The Advanced Options
C → [Options] → “Advanced”
“Send URL via SMS”:Sends the URL of this WAP/
web page via SMS.
“Details”:
Shows detailed information
of the WAP/web page.
“Delete Browser Data”:
Deletes the browser data.
You can clear the cache/
cookies/history/
authentication information.
“Search This Page”: Searches for specific words
in the WAP/web page.
“Jump to Top”:
Jumps to the top of the
WAP/web page.
“Jump to Bottom”:
Jumps to the bottom of the
WAP/web page.
“Copy Text”:
Copies the text on the WAP/
web page.
“Browser Settings”: Displays the settings menus
(p. 85).
FET Mobile Internet
87
Gallery (M 6)
Gallery contains all your pictures, music and videos.
Also included in Gallery are Text Templates. You can
also transmit pictures, sounds and video clips via
Bluetooth wireless technology to other
Bluetooth-enabled devices.
Picture Gallery (M 6-1)
Pictures that are taken by your phone’s camera or
images that are downloaded from mobile Internet sites
can be viewed, edited and organised.
Viewing Pictures
“Gallery” → “Picture Gallery”
1. Select the file you wish to view.
The selected picture is displayed.
Note
• To switch between viewing handset or memory card
content, select the first item in the options menu.
Tip
• You can scroll through your pictures with P and
R.
• To change the default view of pictures (list or grid),
press [Options], select “Manage Items” and then
select “Change List View”.
88
Gallery
Using Images as Wallpaper
“Gallery” → “Picture Gallery”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Editing Pictures
“Gallery” → “Picture Gallery”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Edit”.
3. Select “Picture editor” or “Composite”.
4. Select the desired option.
Note
• “Picture editor” may not be available depending on
the original picture and copyright issued.
Saving an Image to Phonebook Entries
You can use this option only for pictures saved in the
handset memory.
“Gallery” → “Picture Gallery”
1. Highlight the file you wish to add to Phonebook.
2. Press [Options] and select “Add to Contacts”.
To overwrite, select the data you wish to save.
To save as a new entry, select “As New Contact”.
For details on entering a name, see “Adding a New
Phonebook Entry” on page 45.
Downloading Picture Files
“Gallery” → “Picture Gallery” → “Download More”
The picture file download site is displayed.
Video Gallery (M 6-2)
Video clips that are recorded by your phone’s video
camera or video clips that are downloaded from mobile
Internet sites can be viewed and organised.
Note
• To switch between viewing handset or memory card
content, select the first item in the options menu.
Using a Video Clip as a Ring Video Clip
You can set your video clip to play back when the
phone rings.
“Gallery” → “Video Gallery”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
Tip
• For other option menus, see “Common Option
Menus” on page 92.
Downloading Video Clip Files
“Gallery” → “Video Gallery” → “Download More”
The video clip file download site is displayed.
Playing Back Video Clip Files
“Gallery” → “Video Gallery”
1. Select the file you wish to play back.
To pause playback, press B.
To resume, press B again.
To stop playback, press U.
Gallery
89
SD VIDEO (M 6-3)
Video clips with the “ASF” format that are recorded by
a video camera or downloaded from mobile Internet
sites can also be managed with SD VIDEO.
“Gallery” → “SD VIDEO”
1. Select the desired file.
To pause playback, press B.
To resume, press B again.
To delete a file, highlight the file, press [Options]
and select “Delete”.
Note
• In order to manage video clips with SD Video,
perform recording as follows:
[Options] → “Record Time” → “Extended Video”
→ “QVGA(asf)”.
Sound Gallery (M 6-4)
The downloaded sound files and the AMR data
recorded by Voice Recorder are managed in Sound
Gallery. The default ringtones are not contained within
Sound Gallery. Only the sound files that can be played
back on the phone are stored in Sound Gallery.
Playing Back Sound Files
“Gallery” → “Sound Gallery”
1. Select the file you wish to play back.
To stop playback, press U.
90
Gallery
Note
• Playback may not be available for some sound files.
• To switch between viewing handset or memory card
content, select the first item in the options menu.
Using the Sound Files as a Ringtone
“Gallery” → “Sound Gallery”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as ringtone”.
Tip
• For other option menus, see “Common Option
Menus” on page 92.
Downloading Sound Files
“Gallery” → “Sound Gallery” → “Download More”
The sound file download site is displayed.
Themes (M 6-5)
You can easily customise the display by using the
theme files.
Viewing Previews
“Gallery” → “Themes”
1. Highlight the theme file you wish to preview.
2. Press B.
The selected theme file is displayed.
Note
• To switch between viewing handset or memory card
content, select the first item in the options menu.
Setting Theme
“Gallery” → “Themes”
1. Select the desired theme file.
The selected theme file is set as the default theme.
Tip
• Even after a theme is set, you can set a wallpaper
regardless of the set theme. In this case, the other
items follow the set theme.
• For other option menus, see “Common Option
Menus” on page 92.
Downloading Theme Files
“Gallery” → “Themes” → “Download More”
The theme file download site is displayed.
Text Templates (M 6-7)
You can register up to 50 text templates for use in text
messages and multimedia messages. The maximum
capacity of the text templates is 256 characters.
Adding Phrases to Text Templates
“Gallery” → “Text Templates” → “Add New
Template”
1. Enter the text and press B.
Editing Text Templates
“Gallery” → “Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
To view the text template, press B.
To delete the text template, press [Options] and
select “Delete”.
3. Modify the text and press B.
Sending Text Templates
“Gallery” → “Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
Gallery
91
Other Documents (M 6-8)
Common Option Menus
Some types of files are stored in the Other Documents
folder of the phone. You can edit and use these files as
Gallery data.
For using the desired file type, first select the
appropriate folder in the Gallery menu. Gallery
contains the following folders.
“Gallery” → “Picture Gallery”
“Gallery” → “Sound Gallery”
“Gallery” → “Video Gallery”
“Gallery” → “Themes”
“Gallery” → “Java™ Gallery”
“Gallery” → “Text Templates”
“Gallery” → “Other Documents”
Opening a Document File
“Gallery” → “Other Documents”
1. Select the desired file.
Note
• To switch between viewing handset or memory card
content, select the first item in the options menu.
Tip
• For other option menus, see “Common Option
Menus”.
Activating Files with Copyright Protection
(DRM)
Some pictures, sound files, video clips and theme files
have a digital copy protection program, which is called
DRM (Digital Rights Management). You need to
activate the digital licence permission to open the files.
Files protected with DRM are displayed with
.
1. Select the appropriate folder for the desired file
type.
2. Highlight the file you wish to activate.
3. Press [Options] and select “Get Contents Key”.
92
Gallery
Note
• Some pictures with DRM may not open even when an
attempt is made to activate it.
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
Sending Gallery Data
For details on Bluetooth wireless technology, see
“Connectivity” on page 142.
1. Select the appropriate folder for the desired file
type.
Receiving Gallery Data
When the phone receives Gallery data, a confirmation
message is displayed in stand-by.
1. Press [Yes].
The received data is saved in the corresponding
Gallery folder.
2. Highlight the desired file.
3. Press [Options] and select “Send”.
4. Select “As Message” or “Bluetooth”.
Tip
• For details on Bluetooth wireless settings, see
“Connectivity” on page 142.
Tip
• For details on creating a message, see “Creating a
New Message” on page 71.
• For details on Bluetooth settings, see “Bluetooth” on
page 142.
Note
• Pictures/Sounds/Video clips protected by copyright
cannot be sent attached to a message, with the
exception of Separate Delivery files.
• Theme files can only be sent via Bluetooth. Select
“Bluetooth” in step 4.
Gallery
93
Using Gallery Data
You can copy, move, sort, rename, and delete the saved
Gallery data.
1. Select the appropriate folder for the desired file type
(page 92).
2. Highlight the desired file.
3. Press [Options] and select “Manage Items”.
4. Select the desired option.
“Sort”:
Sorts files according to a specific
sequence.
“Rename”:
Renames the file or folder. Select
the desired file or folder to
rename.
“Create Folder”: Creates a new folder.
“Change List View”:
Changes the list view.
“Delete all”:
Deletes all files in the folder.
Note
• “Manage Items” is not available for “Java™
Gallery” and “Text Templates”.
94
Gallery
To Delete the File
1. Select the appropriate folder for the desired file type
(page 92).
2. Highlight the desired file.
3. Press [Options] and select “Delete”.
To See the Gallery Details
1. Select the appropriate folder for the desired file type
(page 92).
2. Highlight the file you wish to view the details of.
3. Press [Options] and select “Details”.
Selecting Multiple Files
You can select more than one item from Gallery for
moving, copying, managing and deleting.
Note
• The following procedure applies when entries other
than “Download More” is highlighted.
1. Select the appropriate folder for the desired file type
(p. 92).
2. Highlight the file you wish to select.
3. Press [Options] and select “Check”.
4. Repeat steps 2 and 3 until you select all the desired
Memory Status (M 6-9)
This function helps you to check the memory status of
the handset memory or memory card. Memory status
covers the following.
Handset Memory: Applications, Pictures, Videos,
Sounds, Themes, Others, Used
and Free
Memory Card:
Pictures, Videos, Sounds,
Themes, Others, Used and Free
“Gallery” → “Memory Status”
1. Select “Handset Memory” or “Memory Card”.
files.
Tip
• To remove the check, highlight the file again and
select “Uncheck” in step 3.
• If you wish to unselect all, select “Manage Items” in
step 3 and select “Uncheck All”.
• You can quickly check, uncheck, check all or uncheck
all items by using the H, J and L keys.
H: Check/uncheck currently highlighted item
J: Checks all items in the current folder
L: Unchecks all checked items in the current
folder
Gallery
95
Java™ (M 1)
Java™ Gallery (M 1-1)
The list of Java™ applications is displayed.
Downloaded applications are displayed in order
starting from the latest one.
Downloading Applications
“Java™” → “Java™ Gallery” → “Download More”
1. Select the desired application.
Before downloading the application you are asked
to confirm what you are about to receive. After
checking the information on the confirmation
screen, the application can be downloaded.
2. Press B to start downloading.
3. Press B when finished.
Note
• User authentication may be required before
downloading the application on some information
screens.
96
Java™
Executing Applications
“Java™” → “Java™ Gallery”
1. Select the title of the application you wish to
execute.
The selected application is executed. When using
network connection type applications, connection
to the network can be selected.
2. To end the application, press F and select “End”.
Setting as a Screensaver for the Display
“Java™” → “Java™ Gallery”
1. Highlight the file you wish to use as a screensaver.
2. Press [Options] and select “Set as Screensaver”.
Setting Permission
You can set permission for selected Java™
applications.
“Java™” → “Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Permission”.
3. Select one of the following options:
“Phone Call”:
Sets permission to make voice
calls.
“Network Access”: Sets permission to access the
network.
“Messaging”:
Sets permission to perform
SMS messaging.
“Autorun”:
Sets permission to perform the
Autorun function.
“Local Connection”: Sets permission to connect to
local devices.
“Read User Data”: Sets permission to read user
data, such as Phonebook
entries, mailbox (Inbox) and
Gallery data.
“Write User Data”: Sets permission to write
entries in your phone, such as
Phonebook entries, mailbox
(Inbox) and Gallery data.
“Use Multimedia”: Sets permission to use the
multimedia recording.
4. Select one of the following options:
“Session”:
“Ask Once”:
“Blanket”:
“No”:
The confirmation message is
not displayed until you exit
the application, while
execution of network access is
authorised.
The confirmation message is
displayed every time network
access is executed.
The confirmation message is
not displayed until the
application is deleted or you
change the settings, while
execution of network access is
authorised.
Execution of network access
is not authorised.
Note
• To clear all the permission settings, select “Reset” in
step 3.
• Some permissions are not available for some Java™
applications.
• “Read User Data” and “Write User Data” may not
be available in step 3.
Java™
97
Viewing Application Information
You can check the information of Java™ applications.
“Java™” → “Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Deleting an Application
You can delete an application in the folder.
“Java™” → “Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Delete”.
98
Java™
Java™ Settings (M 1-2)
Application Volume
You can set the volume of the application such as the
sound effect to one of the five levels or silent. When the
profile is set to “Silent”, the “General Volume” setting
(p. 116) has priority.
“Java™” → “Java™ Settings” → “Application
Volume”
1. Press a (or d) to increase the volume or press b
(or c) to decrease the volume and then press B.
Backlight
“Java™” → “Java™ Settings” → “Backlight” →
“Switch On/Off”
1. Select from “Always On”, “Always Off” or
“Normal Settings”.
“Always On”:
Lit while the application is
operated.
“Always Off”:
Unlit while the application is
operated even if a key is
pressed.
“Normal Settings”: Works with the main
backlight setting (p. 124).
To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to “Off”, the backlight cannot be
turned on from the application.
“Java™” → “Java™ Settings” → “Backlight” →
“Blink”
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can
choose whether the operation is enabled or disabled.
“Java™” → “Java™ Settings” → “Vibration”
1. Select “On” or “Off”.
Calls & Alarms
You can set the priority of incoming calls and alarms
while an application is operating.
“Java™” → “Java™ Settings” → “Calls & Alarms”
1. Select “Voice Call”, “Video Calling”, “Incoming
Message” or “Alarm”.
2. Select the desired method.
• “Call Priority”, “Message Priority” or “Alarm
Priority”:
The application is suspended automatically, and
you can receive a call or a message, or the alarm
will sound. After finishing the call or sending the
message, or when the alarm ends, the suspend
indicator ( ) is displayed letting you know there
is a suspended application.
• “Call Notice”, “Message Notice” or “Alarm
Notice”:
The marquee (character scrolls) is displayed on
the first line of the screen while the application
continues. If you press D, the application is
suspended, and you can receive a call. After
finishing the call or sending the message, the
suspend indicator ( ) is displayed letting you
know there is a suspended application.
Java™
99
Screensavers
You can download screensaver applications for the
stand-by screen and set the time period for the
screensaver to activate.
“Java™” → “Java™ Settings” → “Java™
Wallpaper” → “Switch On/Off”
1. Select “On” or “Off”.
To Set the Activation Time
“Java™” → “Java™ Settings” → “Java™
Wallpaper” → “Activation Time”
1. Enter the activation time in two digits using the
keypad.
To Set the Suspend Time
“Java™” → “Java™ Settings” → “Java™
Wallpaper” → “Suspend Time”
1. Set the desired time period from “after 15 min.” to
“after 6 hours”.
100 Java™
Default Settings
“Java™” → “Java™ Settings” → “Set to Default”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
Clearing All Memory
“Java™” → “Java™ Settings” → “Memory All
Clear”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
Java™ Information (M 1-3)
“Java™” → “Java™ Information”
The information about the licences belonging to Java™
is displayed.
Organiser (M 3)
Calendar (M 3-1)
The calendar allows you to easily schedule
appointments.
These entries can also be sent via Bluetooth wireless
technology to a PC to share the same schedules. When
you exchange entries with other devices, the date and
time displayed may be different to that of the original
data depending on the data format of the receiving
device.
Creating a New Entry
“Organiser” → “Organiser” tab → “Calendar”
1. Select the desired day to which you want to add an
event.
2.
3.
4.
5.
Select “Add New Entry”.
Enter the subject.
Enter the start date and time.
Select the reminder time.
When selecting “Other”, enter the desired reminder
date and time.
6. Select the desired category.
7. Press [Save].
Note
• If the date and time settings have not been entered,
the date and time entry screen is displayed (p. 126).
• The reminder will not sound when “General
Volume” (p. 116) is set to “Silent”.
• Quick Entry is available if you press N in the
Calendar screen. Select the desired category and
press [Select].
To Change the Settings
1. Select the item you wish to change in the New Entry
screen.
• “Reminder”:
Sets options including
“Reminder Time”, “Assign
Tone/Video” and “Duration” for
the reminder.
• “Repeat”:
Sets the number of times the
reminder sounds.
• “Location”:
Sets the location for the schedule
entry.
• “Description”: Enables entering a memo for the
schedule entry.
Organiser 101
• “Secret”:
Sets to show or hide the schedule
entry. Set to “On” to make the
data secret or select “Off” to
leave it as it is.
Viewing a Schedule Entry
“Organiser” → “Organiser” tab → “Calendar”
1. Select the day you wish to view.
2. Select the desired entry.
To Search by Date
1. In any view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to
enter the desired date.
Tip
• In the monthly, 2-month or weekly view, you can
control the view by using the following:
Monthly or 2-month view
P:
Displays the previous month.
R:
Displays the next month.
Q:
Switches the view.
K:
Moves the cursor to today.
c/ d : Moves the cursor to left (the previous day)
or to right (the next day).
a/ b : Moves the cursor upward (last week) or
downward (next week).
102 Organiser
Weekly view
P:
Displays the previous week.
R:
Displays the next week.
Q:
Switches the view.
K:
Moves the cursor to today.
c/ d : Moves the cursor to left (the previous day)
or to right (the next day).
a/ b : Moves the weekly view up or down (the
previous hour or next hour).
Setting a Holiday
In the weekly or monthly view, you can highlight a date
or days of the week with seven colour options.
“Organiser” → “Organiser” tab → “Calendar”
For Date Colour
1. Highlight the day you wish to set.
2. Press [Options] and select “Set Holiday”.
3. Select “By Date” and then select the desired colour.
Finding a Schedule Entry
“Organiser” → “Organiser” tab → “Calendar”
1. In any view, press [Options] and select “Find”.
2. Enter a few letters of the subject.
Search results are displayed in time order.
Editing a Schedule Entry
“Organiser” → “Organiser” tab → “Calendar”
1. Select the day you wish to edit.
For Days of the Week Colour
1. Press [Options] and select “Set Holiday”.
2. Highlight the entry you wish to edit, press
2. Select “By Week” and then select days of the week
3. Select the desired item and modify the entry.
4. Press [Save].
you wish to colour.
[Options], then select “Add New Entry”.
3. Select the desired colour.
Tip
• The selected date/days are also highlighted on the
calendar on the stand-by screen.
Note
• If the same date is set with both a date colour and
a day of the week colour, the date is highlighted in the
date colour.
• Up to 100 days can be set for the highlights.
Organiser 103
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Highlight the entry you wish to send, press
2. Select the desired option.
3. Select “As Message” or “Via Bluetooth”.
“This Appointment” (daily view):
Deletes the selected entry.
“All This Day” (weekly, monthly and 2-month view):
Deletes all entries for the
selected day.
“All This Month” (monthly view):
Deletes all entries for the
selected month.
“Last two months” (2-month view):
Deletes all entries for the
selected two months.
“Up to Last Month” (monthly view):
Deletes all entries before the
selected month.
“All Appointments” (monthly and 2-month view):
Deletes all entries in this
application.
Sending a Schedule Entry
“Organiser” → “Organiser” tab → “Calendar”
1. Select the day including schedule entries you wish
to send.
104 Organiser
[Options], then select “Send”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 142.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
Receiving a Schedule Entry
When the phone receives a schedule entry, a
confirmation message is displayed in stand-by.
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Tip
• For details on entering Bluetooth wireless settings,
see “Connectivity” on page 142.
Viewing the Memory Status
1. In any view, press [Options] and select “Memory
Status”.
Alarms (M 3-2)
Setting the Alarms
The alarm function allows you to be alerted at a
specified time.
Note that you need to set the current date and time
before setting the alarm function if it has not been done
already.
“Organiser” → “Organiser” tab → “Alarms”
1. Select the blank line (--:--) you wish to set an alarm to.
2. Enter the desired time.
3. Press [Save].
To Change the Settings
1. Select the item you wish to change in the Set Alarm
screen.
• “Repeat”:
Sets the number of times the alarm sounds.
• “Assign Tone/Video”:
Assigns a tone or video clip file to the alarm.
• “Snooze”:
Sets the snooze option.
• “Alarm Volume”:
Sets the desired volume.
The alarm will not sound when “Alarm Volume”
is set to “Silent”. When the profile is set to
“Silent”, the “General Volume” setting (p. 116)
has priority.
• “Vibration”:
Sets the vibration pattern of the alarm.
For details on selecting a vibration, see
“Vibration” on page 120.
• “Duration”:
Sets the duration of the alarm.
Resetting an Alarm
“Organiser” → “Organiser” tab → “Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarms
“Organiser” → “Organiser” tab → “Alarms”
1. Select “Clear All”.
Organiser 105
Stopwatch (M 3-3)
Tasks (M 3-4)
You can store 4 lap times when using the stopwatch
function.
“Organiser” → “Organiser” tab → “Stopwatch”
1. Press B to start.
Press [LAP] to view the lap time before the
stopwatch stops. Last 4 lap times are saved.
2. Press B to stop.
You can register your schedule as task entries for a
given date or time.
Tip
• You can save a record of lap times and the stop time
by pressing [Options] and selecting “Save to
Templates”.
Resetting Time
1. After stopping the stopwatch, press [Options] and
select “Reset”.
Creating a New Entry
“Organiser” → “Organiser” tab → “Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and time.
4. Press [Save].
Note
• If the date and time settings have not been entered,
the date and time entry screen is displayed (p. 126).
To Select the Reminder Time
1. On the New Entry screen, select “Reminder”.
2. Select “Reminder Time”.
3. Select the reminder time.
When selecting “Other”, enter the desired reminder
date and time.
106 Organiser
To Change the Type of Alarm Tone or Video Clip
File
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Select sound” and then select “Preset
Sounds” or “Sound Gallery”, or select “Select
Video”.
4. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a
Ringtone for an Incoming Call” on page 117.
To Change the Duration of Alarm Tone or Video
1. On the New Entry screen, select “Reminder”.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off”
to leave it as it is.
Making the Entry Completed or Incomplete
“Organiser” → “Organiser” tab → “Tasks”
1. Highlight the desired entry.
2. Press B.
3. On the view screen, press [Options] and select
“Check”.
To make the entry incomplete, select “Uncheck”.
2. Select “Duration”.
3. Select the desired duration.
To Change the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the task entry.
Organiser 107
Finding a Task Entry
“Organiser” → “Organiser” tab → “Tasks”
1. Press [Options] and select “Find”.
Viewing the Memory Status
“Organiser” → “Organiser” tab → “Tasks”
1. Press [Options] and select “Memory Status”.
2. Enter a few letters of the subject and press B.
Deleting Entries
“Organiser” → “Organiser” tab → “Tasks” →
[Options] → “Delete”
1. Select the desired option.
“This Task”:
Deletes the selected entry.
“All Completed Tasks”: Deletes all checked
entries.
“All Tasks”:
Deletes all entries.
Search results are displayed in time order.
Sending a Task Entry
“Organiser” → “Organiser” tab → “Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message” or “Via Bluetooth”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 142.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
108 Organiser
World Clock (M 3-5)
Countdown Timer (M 3-6)
Setting the Time Zone
“Organiser” → “Organiser” tab → “World Clock”
1. Press [Edit] and select “Set Time Zone”.
The current time zone is indicated by red line on the
world map.
2. Press c or d to change the time zone.
“Organiser” → “Organiser” tab → “Countdown
Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press B to start counting.
3. Press B.
To Set the Custom Time Zone
“Organiser” → “Organiser” tab → “World Clock”
1. Press [Edit] and select “Set Time Zone”.
2. Press [Options] and select “Set Custom Zone”.
3. Enter the desired city name and time.
Setting Daylight Saving
“Organiser” → “Organiser” tab → “World Clock”
1. Press [Edit] and select “Daylight Saving”.
3. Press B to pause.
Press B again to continue counting.
4. If the countdown has finished, press [Cancel] and
then press B to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and
select “Edit”.
2. Modify the desired time.
2. Select “On” or “Off”.
Organiser 109
Calculator (M 3-d-1)
The calculator function performs the 4 arithmetic
calculations using up to 12 digits.
“Organiser” → “Utilities” tab → “Calculator”
Rate Conversion
You can also use the calculator as a currency calculator
to convert from/to a home currency using a conversion
rate that you enter.
To Set a Currency Conversion Rate
“Organiser” → “Utilities” tab → “Calculator” →
[Options] → “Currency Converter” → “Exchange
Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the currency conversion rate.
To Convert a Value
“Organiser” → “Utilities” tab → “Calculator”
1. Enter the value to be converted.
Key operations for calculation are as follows:
To enter a decimal point, press P.
To clear the entered number or function, press
[Clear].
To do the calculations, press B.
To start a new calculation, press [Clear].
110 Organiser
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to
Foreign”.
Voice Recorder (M 3-d-2)
This allows you to record a voice clip, which can be
used to remind you of schedule entries or be sent within
a multimedia message. The recorded voice clip is saved
in Sound Gallery. Voice clips are saved in .amr format.
Recording a Voice Clip
“Organiser” → “Utilities” tab → “Voice Recorder”
1. Press B to start recording.
To stop recording before the recording time is over,
press B.
2. Select “Save” to save the voice clip.
Note
• Press a (or V) or b (or W) to adjust the sound
volume when playing back the recorded file.
Sending Voice Clips
“Organiser” → “Utilities” tab → “Voice Recorder”
1. Press B to start recording.
To stop recording before the recording time is over,
press B.
2. Select “Save and Send”.
Selecting the Record Time
“Organiser” → “Utilities” tab → “Voice Recorder”
→ [Options] → “Record Time”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, voice clips are
automatically saved to a memory card.
Selecting Storage Memory
“Organiser” → “Utilities” tab → “Voice Recorder”
→ [Options] → “Save Recording to”
1. Select the desired location.
When selecting “Choice”, you can select the
location when saving a voice clip.
Scanner (M 3-d-3)
With the built-in digital camera, you can read texts and
barcodes in Jan format and QR codes, and create QR
codes. The scanned data can be saved as a URL, Email
address and text.
Note
• When scanning does not take place, it may be due to
one of the following reasons: type or size of barcode,
scratches, dirt, damage, print quality, light
reflection, etc.
Organiser 111
Reading Barcodes
“Organiser” → “Utilities” tab → “Scanner” → “Scan
Barcode”
1. Display the barcode using the external camera.
Viewing the Scanned Data
“Organiser” → “Utilities” tab → “Scanner” →
“Scanned Results”
1. Highlight the data you wish to view, then press B.
2. Press B.
3. Press [Options] and select the desired option.
2. Enter the desired text or select the desired data, then
The options vary depending on the scanned data.
“Open Link”:
The browser opens the URL.
“Copy URL”:
The URL is copied.
“Save”:
The URL is saved.
“Send Message”: The result is sent as SMS or
MMS.
“Copy”:
The result is copied.
To Use the Continuous Scanning
1. In scanning mode, press [Options] and select
“Continuous Scan”.
2. Select “On” or “Off ”.
Opening a Barcode Picture
“Organiser” → “Utilities” tab → “Scanner” →
“Open Barcode”
1. Select the desired picture data for barcode.
Press B to save.
112 Organiser
press B.
3. Press B to save.
Creating QR Codes
“Organiser” → “Utilities” tab → “Scanner” →
“Create QR Code”
1. Select the desired option.
“Text Input”:
Create a QR code using the text
you enter.
“Gallery”:
Create a QR code using the
Gallery data.
2. Enter the desired text or select the desired data, then
press B.
3. Press B to save.
Tip
• The QR code is saved in a PNG format file.
Scanning Text
“Organiser” → “Utilities” tab → “Scanner” → “Scan
Text”
1. Display text using the camera.
2. When the bar under the scanned text is blue, press
B.
3. Press a or b to select the desired text, then press
B.
4. Press [Options] and select the desired option.
“OK”:
The scanned result is in the text
entry screen.
“Select/Edit”:
The scanned result can be
modified.
“Change Mode”: The scanned result can be
converted to a web address, mail
address, phone number or to
roman text.
To Use Reversed Text
1. In scanning mode, press [Options] and select
“Reversed Text”.
2. Select the desired option from “Auto”, “Normal” or
“Reversed”.
Expenses Memo (M 3-d-4)
You can record an expenses memo with pre-defined or
edited categories.
Recording in the Expenses Memo (M 3-d-4-1)
“Organiser” → “Utilities” tab → “Expenses Memo”
→ “Add New Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals (M 3-d-4-2)
“Organiser” → “Utilities” tab → “Expenses Memo”
→ “Totals”
Recorded expenses are displayed on the screen.
To Change Category
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Category”.
3. Select the desired category.
To Change Amount
1. In the total view, highlight the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
Organiser 113
To Delete a Recorded Item or All Items
1. In the total view, highlight the desired item.
2. Press [Options] and select “Delete Item” or “Delete
All”.
Editing the Category Name (M 3-d-4-3)
“Organiser” → “Utilities” tab → “Expenses Memo”
→ “Edit Category”
1. Select the desired category name.
2. Modify the name.
Phone Help (M 3-d-5)
You can view the help list and use it to guide you in the
phone’s functions.
“Organiser” → “Utilities” tab → “Phone Help”
1. Press a or b.
114 Organiser
SIM Application (M 10)
You can refer to the information on the SIM/USIM
card. Contact your service provider for further details.
SIM Application 115
Settings (M 9)
Profiles
The ringtone, sound, vibration and light settings can be
customised for each profile according to your
environment.
There are 6 profiles: “Normal”, “Meeting”, “Activity”,
“Car”, “Headset” and “Silent”.
Activating a Profile
“Settings” → “Profiles” tab
1. Select the desired profile.
Note
• When a profile is set, the corresponding indicator
described on page 23 is displayed in stand-by.
Tip
• In stand-by, long press R to switch Profiles
between Silent mode and the profile most recently
activated.
116 Settings
Resetting Profile Settings
“Settings” → “Profiles” tab
1. Highlight the profile you wish to reset.
2. Press [Options] and select “Set to Default”.
3. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
Volume
You can adjust the volume for incoming voice calls,
SMS/MMS/Email messages and other sounds
(“General Volume”) to one of six levels.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Volume”.
4. Select “For Incoming Call”, “For New Message” or
“General Volume”.
5. Press a (or d) to increase the ringer volume or
press b (or c) to decrease the ringer volume and
then press B.
To select “Silent”, press b (or c) at level 1.
Tip
• You can select from two levels or an increasing
volume, when selecting the “Silent” profile.
Assigning a Ringtone for an Incoming Call
You can set a ringtone for incoming voice and video
callings. You can select from different tones including
patterns, sound effects and melodies or set a sound in
Saved Sounds as the default ringtone.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
6.
7. Highlight the ringtone you wish to use.
To hear the demo play, press [Options] and select
“Play”.
8. Press [Options] and select “Assign” for “Preset
Sounds”.
Note
• Even if you delete a sound that is being used as a
ringtone, the setting remains the same and the default
ringtone sounds.
• Melodies can be selected from “Sound Gallery” and
“Preset Sounds”.
Press [Options] and select “Personalise”.
Select “Ringtone/Ringvideos”.
Select “For Voice Call” or “For Video Calling”.
Select “Assign Tone”.
Select “Preset Sounds” or “Sound Gallery”.
Settings 117
Assigning a Ring Video Clip for an Incoming
Call
You can set a ring video clip for incoming voice and
video callings. You can set a video clip in Saved Videos
as the default ring video clip.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
6.
Press [Options] and select “Personalise”.
Select “Ringtone/Ringvideos”.
Select “For Voice Call” or “For Video Calling”.
Select “Assign Video”.
Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select
“Play”.
7. Press B.
Message Notification
When receiving messages, your phone will notify you
of their arrival with the ringtone or ring video clip you
specify.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
118 Settings
4. Select “For New Message”.
5. Select “Assign Tone” or “Assign Video”.
If “Assign Tone” is selected, select “Preset Sounds”
or “Sound Gallery”.
6. Highlight the desired ringtone or ring video clip.
For details on selecting a ringtone or a ring video
clip, see “Assigning a Ringtone for an Incoming
Call” on page 117 or “Assigning a Ring Video Clip
for an Incoming Call”.
7. Press [Options] and select “Assign” for “Preset
Sounds”.
8. Select “For New Message” and select “Duration”.
9. Enter the desired duration of message notification in
2 digits using the digit keys.
Keypad Tones
When the keypad tone is set on, you will hear a
confirmation tone each time you press any key.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “System Sounds”.
4. Select “Keypad Tones”.
5. Highlight the desired tone pattern.
6. Press [Options] and select “Assign”.
Warning Tone
Your phone can be set to emit a warning tone when an
error occurs.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
Power On/Off Sound
Your phone can be set to emit a sound when it is
switched on or off.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
Press [Options] and select “Personalise”.
Select “System Sounds”.
Select “Power On Sound” or “Power Off Sound”.
Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or
“Sound Gallery”.
For “Duration”, enter the desired duration of sound
in 2 digits using the digit keys.
Press [Options] and select “Personalise”.
Select “System Sounds”.
Select “Warning Tone”.
Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or
“Sound Gallery”.
For “Duration”, select the desired time between 0.5
and 2 seconds.
Settings 119
Vibration
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
Press [Options] and select “Personalise”.
Select “Vibration”.
Select “For Incoming Call” or “For New Message”.
Select “Switch On/Off” and then select “On” to
activate.
If you wish to change the vibration pattern, select
“Vibration Pattern” and then select the desired
option.
Tip
• When you select “On” in step 5, “
stand-by.
120 Settings
” is displayed in
Event Light
You can set the Small Light to flash when receiving an
incoming call or a new message.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Event Light”.
4. Select the desired option.
“For Voice Call”:
“For Video Calling”:
“For New Message”:
Flashes when an incoming
voice call is received.
Flashes when an incoming
video calling is received.
Flashes when a new
message is received.
Status Light
You can set the Small Light to flash when you miss any
incoming calls or new messages.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
Any Key Answer
You can answer a call by pressing any key except F or
[Busy]. For details, see page 26.
“Settings” → “Profiles” tab
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Status Light”.
4. Select the desired option.
2. Press [Options] and select “Personalise”.
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
“For Missed Call”:
“For New Message”:
Flashes when an incoming
voice call is missed.
Flashes when a new
message is missed.
Phone Settings
Setting the Display (M 9-d-1)
You can change the display settings.
Settings 121
Setting the Wallpaper (M 9-d-1-1)
Your phone includes preset pictures to be used as
wallpaper in stand-by. Pictures taken with the phone’s
digital camera or images downloaded from a WAP site
can also be used as wallpaper.
“Settings” → “Phone Settings” tab → “Display
Settings” → “Wallpaper”
1. Select the folder in which the picture you wish to set
is contained.
Pictures can be selected from “Preset Pictures”,
“Picture Gallery” or “Other Documents”.
2. Select the desired picture.
3. After displaying the picture, press B.
Note
• Some pictures cannot be used because of their
picture and data types.
• Wallpaper can be linked to a theme. Select “Link to
Theme” in step 1.
122 Settings
Themes (M 9-d-1-2)
You can easily customise the display by using the
theme files.
The theme files downloaded from a WAP site can be
used.
“Settings” → “Phone Settings” tab → “Display
Settings” → “Themes”
1. Select “Preset Themes” or “My Themes”.
2. Select the desired theme file.
Tip
• Even after a theme is set, you can set a wallpaper
regardless of the set theme. In this case, the other
items follow the set theme.
Assigning Pictures (M 9-d-1-3)
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken with the phone’s digital camera or
images downloaded from a WAP site can be used.
To Set Built-in Pictures
“Settings” → “Phone Settings” tab → “Display
Settings” → “Assign Pictures”
1. Select the desired function to set the picture to.
2. Select “Default” when you select “Power On” or
select “Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when
you select “Incoming” or “Incoming Video Call” in
step 1.
5. Specify the area you wish to display using the
navigation keys, then press B.
Note
• Some pictures cannot be used because of their
picture and data types.
Setting the Stand-by Display (M 9-d-1-4)
You can set the stand-by screen display.
“Settings” → “Phone Settings” tab → “Display
Settings” → “Standby Display”
1. Select “Clock/Calendar”, “Display icons” or “Show
Operator Name”.
To Set Saved Pictures
“Settings” → “Phone Settings” tab → “Display
Settings” → “Assign Pictures”
1. Select the desired function to set the picture to.
2. Select “Picture Gallery”.
3. Select the desired picture.
4. After displaying the picture, press B.
Settings 123
Setting the Greeting Message (M 9-d-1-5)
You can set the message which is displayed when the
phone is turned on.
“Settings” → “Phone Settings” tab → “Display
Settings” → “Greeting Message”
1. Select “Switch On/Off” and then select “On” or
“Off”.
Tip
• If you wish to edit the message, select “Edit
Message” in step 1 and enter a message (up to 10
characters).
Backlight (M 9-d-1-6)
The backlight will shut off if you do not press the
keypad for a certain length of time. You can specify a
desired time to elapse before the backlight shuts off,
which will help conserve battery life.
Tip
• When you purchase this phone, Backlight is set to 15
seconds.
To Select the Backlight Time Out
“Settings” → “Phone Settings” tab → “Display
Settings” → “Backlight” → “Time Out”
1. Select the desired time.
Select “Off” to shut it off.
124 Settings
To Adjust the Brightness of the Backlight
“Settings” → “Phone Settings” tab → “Display
Settings” → “Backlight” → “Brightness”
1. Press a (Light) and b (Dark) to switch between 4
levels of clarity.
2. Press B.
Setting the Display Saving (M 9-d-1-7)
The screen of this phone will automatically turn off
after a given amount of time. You can change the length
of time before the Display Saving goes into effect,
which will help conserve battery life.
“Settings” → “Phone Settings” tab → “Display
Settings” → “Display Saving”
1. Select the desired time.
When you purchase this phone, Display Saving is
set to 2 minutes.
Note
• Display Saving does not work while you are using
WAP or an application.
• To cancel the Display Saving: The display saving
continues until either a key is pressed or there is an
incoming alert. The first key press only cancels this
function. You must press another key in order to enter
any numerical or text value.
Sound Settings (M 9-d-2)
You can use this menu to check or edit the current
profile settings (except “Any Key Answer”).
“Settings” → “Phone Settings” tab → “Sound
Settings”
Slider Settings (M 9-d-3)
You can set the action when sliding open or sliding
close your phone.
“Settings” → “Phone Settings” tab → “Slider
Settings”
“No Action”:
Disables answering an
incoming call by sliding
open the phone.
To Set the Close Action for Calling
1. Select “Calls on Close” and select the desired
option.
“End Call”:
“No Action”:
Enables terminating a call
by sliding close the phone.
Disables terminating a call
by sliding close the phone.
To Set the Close Action for Locking
1. Select “Lock on Close”.
2. Select the desired time to elapse before the phone
locks after sliding it close.
If you select “No Action”, sliding close the phone
will not lock it.
To Set the Open Action for Calling
1. Select “Calls on Open” and select the desired
option.
“Accept Call”:
Enables answering an
incoming call by sliding
open the phone.
Settings 125
Date & Time (M 9-d-4)
You need to set the correct time and date in order for
your phone’s various time-based functions to work
correctly.
“Settings” → “Phone Settings” tab → “Date & Time”
→ “Set Date/Time”
1. Enter the day, month, year and time using the digit
keys.
Tip
• When you enter the time in the 12-hour format, press
a or b to switch between am and pm. The order in
which the date and time is displayed is based on the
format setting.
To Set Daylight Saving (M 9-d-4-2)
“Settings” → “Phone Settings” tab → “Date & Time”
→ “Daylight Saving”
1. Select “On” or “Off”.
To Set the Time Zone (M 9-d-4-3)
“Settings” → “Phone Settings” tab → “Date & Time”
→ “Set Time Zone”
1. Press c or d to select the home city to set.
2. Press B.
126 Settings
To Customise the Time Zone
“Settings” → “Phone Settings” tab → “Date & Time”
→ “Set Time Zone” → [Options] → “Set Custom
Zone”
1. Enter the city name.
2. Enter the time-zone differences using the digit keys.
Press a or b to switch between − and +.
3. Press B.
World Clock (M 9-d-4-4)
For details, see page 109.
To Select the Time Format (M 9-d-4-5)
“Settings” → “Phone Settings” tab → “Date & Time”
→ “Time Format”
1. Select “24 Hour” or “12 Hour”.
To Select the Date Format (M 9-d-4-6)
“Settings” → “Phone Settings” tab → “Date & Time”
→ “Date Format”
1. Select from “D-M-Y”, “M-D-Y” or “Y-M-D”.
Language Setting (M 9-d-5)
You can change the language displayed on the phone.
“Settings” → “Phone Settings” tab → “Language”
1. Select the desired language.
Tip
• You can also change the input language on the text
entry screen (p. 36).
Note
• If you select “Automatic” in step 1, the language
preset on the SIM/USIM card is selected.
• If the language preset on the SIM/USIM card is not
supported, then the default language of the phone is
selected.
Shortcuts (M 9-d-6)
You can change the default shortcut action/assignment
of the a, b, c, d, A and C soft keys with the
Shortcuts menu.
The menu shows the current assignment of each of the
above keys.
“Settings” → “Phone Settings” tab → “Shortcuts”
1. Highlight the key you wish to change.
4. Press [Options] and select “Assign” to update the
key for the highlighted item.
Note
• If you are outside of your network area, the networkrelated items are not available.
Tip
• You can clear the settings by selecting “Set to
Default” in step 1.
Master Reset (M 9-d-9)
You can return the settings for M1 to M12 to the default
settings.
“Settings” → “Phone Settings” tab → “Master Reset”
→ “Reset Settings”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
Note
• Some settings are not deleted by this function. Data
stored in Phonebook, etc. is not deleted.
2. Press [Assign].
3. Press a and b to scroll by item.
Settings 127
To Reset All Settings for M1 to M12 and All
Created Data
“Settings” → “Phone Settings” tab → “Master Reset”
→ “Reset All”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
Other Settings
Call Settings (M 9-d-d-1)
Voicemail & Diverts (M 9-d-d-1-1)
This service can be used to divert incoming calls that
you cannot answer. Calls can be diverted to another
phone number or to your Voicemail system.
Note
• This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
128 Settings
To Activate the Voicemail Service
“Settings” → “Other Settings” tab → “Call Settings”
→ “Voicemail & Diverts” → “Voicemail” →
“Activate”
1. Select one of the following options:
“Always”:
Diverts all calls without
ringing.
“When Busy”:
Diverts incoming calls while
you are talking on the phone.
“No Answer”:
Diverts incoming calls if you
do not answer a call within a
certain period of time.
“Not Reachable”: Diverts incoming calls when
your phone has no network
service or is switched off.
If you select “No Answer”, select the period of time
from 6 levels (05 to 30 seconds).
2. Press B.
To Activate the Diverts Service
Select the appropriate option.
“Settings” → “Other Settings” tab → “Call Settings”
→ “Voicemail & Diverts” → “Diverts”
1. Select “Activate” or “By Service”.
If you select “By Service”, you can select further
divert options.
2. Select from “Always”, “When Busy”, “No Answer”
Call Waiting (M 9-d-d-1-2)
or “Not Reachable”.
If you select “No Answer”, select the period of time
from 6 levels (05 to 30 seconds).
3. Enter a phone number to which you wish to divert
calls or search for it in the Phonebook (p. 46).
Note
• This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
4. Press B.
Note
• When “Voice Calls” diverts are set to “Always”,
“ ” is displayed in stand-by.
To Check the Diverts Status
“Settings” → “Other Settings” tab → “Call Settings”
→ “Voicemail & Diverts” → “Status”
1. Select the diverts option you wish to check.
To Cancel the Diverts and Voicemail Service
Once you have changed the diverts settings, you can
cancel them all with this service.
“Settings” → “Other Settings” tab → “Call Settings”
→ “Voicemail & Diverts” → “Cancel All”
If you wish to be able to receive another incoming call
while you have a call in progress, you must activate the
Call Waiting service.
“Settings” → “Other Settings” tab → “Call Settings”
→ “Call Waiting”
1. Select “On”, “Off” or “Status”.
Showing Your Number (M 9-d-d-1-3)
This lets you control whether to show your phone
number when calling another party or not.
“Settings” → “Other Settings” tab → “Call Settings”
→ “Show Your Number”
1. Select “On”, “Off” or “Status”.
Note
• Some networks do not support this service. Please
check with your service provider for availability.
Settings 129
Restrict Calls (M 9-d-d-1-4)
This function lets you place restrictions on incoming
and outgoing calls. To activate this option you will need
the specified password, which is available from your
service provider.
“Settings” → “Other Settings” tab → “Call Settings”
→ “Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
“Outgoing Calls”:
Restricts outgoing calls.
“Incoming Calls”:
Restricts incoming calls.
2. Select one of the following options:
(For “Outgoing Calls”)
“Bar All Outgoing Calls”:
Restricts all outgoing calls
except emergency calls.
“Bar International Calls”:
Restricts all outgoing
international calls.
“Only Local & Home”:
Restricts all outgoing
international calls except to
your home country.
(For “Incoming Calls”)
“Bar All Incoming Calls”:
Restricts all incoming calls.
130 Settings
“Bar if Abroad”:
Restricts all incoming calls
when you are outside of the
coverage from your
registered service provider.
3. Select one of the following options:
“All Services”:
Restricts all services.
“Voice Calls”:
Restricts all voice calls.
“Video Callings”:
Restricts all video callings.
“Fax”:
Restricts all fax calls.
“Messages”:
Restricts all messages.
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
To Cancel Settings
“Settings” → “Other Settings” tab → “Call Settings”
→ “Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
Rejecting an Incoming Call
You can register phone numbers you do not wish to
answer.
To Reject the Registered Number
“Settings” → “Other Settings” tab → “Call Settings”
→ “Restrict Calls” → “Rejected Numbers” →
“Switch On/Off”
1. Select “On” or “Off”.
To Register the Rejected Number
“Settings” → “Other Settings” tab → “Call Settings”
→ “Restrict Calls” → “Rejected Numbers” → “Set
Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
Rejecting a Call when the Caller’s Number is
Withheld
“Settings” → “Other Settings” tab → “Call Settings”
→ “Restrict Calls” → “Withheld Call”
1. Select “On” or “Off”.
Changing the Network Password
“Settings” → “Other Settings” tab → “Call Settings”
→ “Restrict Calls” → “Change N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to
enter the password again.
4. Press B.
Minute Minder (M 9-d-d-1-5)
Minute Minder function informs you of your talk time
by sounding a tone after every minute.
“Settings” → “Other Settings” tab → “Call Settings”
→ “Minute Minder”
1. Select “On” or “Off”.
Settings 131
Display Call Timer (M 9-d-d-1-6)
“Settings” → “Other Settings” tab → “Call Settings”
→ “Display Call Timer”
1. Select “On” or “Off”.
Display Call Cost (M 9-d-d-1-7)
“Settings” → “Other Settings” tab → “Call Settings”
→ “Display Call Cost”
1. Select “On” or “Off”.
Auto Redial (M 9-d-d-1-8)
“Settings” → “Other Settings” tab → “Call Settings”
→ “Auto Redial”
1. Select “On” or “Off”.
Video Calling Settings (M 9-d-d-2)
Set various types of functions and services for video
callings.
To Select an Image for the Alternative Image
You can select an image shown to the other party
between the sub camera image and an alternative image
from the saved picture files.
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Camera Picture”
1. Select “Default Image” or “Alternative Image”.
For “Default Image”, select “Internal Camera”,
“External Camera” or “Alternative Image”.
For “Alternative Image”, select “Preset Picture” or
“Picture Gallery”.
To Turn On or Off the Speaker
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Loudspeaker”
1. Select “On” to turn on the loudspeaker or select
“Off” to turn it off.
132 Settings
To Select the Picture Quality
Select the desired data format for your environment.
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Incoming Picture Quality”
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Outgoing Picture Quality”
1. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
Select “Frame Rate Priority” to perform faster
communication.
To Set the Backlight
With this setting on, the phone’s backlight is on when
making a video calling.
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Backlight”
1. Select “Always On”, “Always Off” or “As Normal
Setting”.
The “As Normal Setting” option depends on the
backlight setting of the display (p. 124).
To Mute the Microphone
You can mute the microphone while making a video
calling.
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Mute Microphone”
1. Select “On” to mute or “Off” to cancel mute.
To Assign Hold Guidance Picture
You can display an image saved in the phone on your
display while you are putting a call on hold.
“Settings” → “Other Settings” tab → “Video Calling
Settings” → “Hold Guidance Picture”
1. Select “Preset Picture” or “Picture Gallery”.
2. Select the desired picture.
Security Settings (M 9-d-d-3)
You can set various locks on your phone such as PIN
Entry and Handset Lock.
“Settings” → “Other Settings” tab → “Security
Settings” → “Security Settings”
Settings 133
Enabling/Disabling the PIN Code
If the PIN code is enabled, you are asked to enter the
PIN code each time the phone is switched on. Your PIN
code is registered on the SIM/USIM card and you
should have been made aware of the code when you
purchased the SIM/USIM card. Contact your service
provider for further details.
Select “On” for “PIN Entry” and enter your PIN code if
you wish to activate the PIN lock.
Note
• If you enter the wrong PIN code three times, the SIM/
USIM card will lock. To remove the lock, contact
your service provider or SIM/USIM card vendor.
To Change the PIN Code
This allows you to change the PIN code registered on
the SIM/USIM card. Before you change the PIN code,
select “On” for “PIN Entry”.
Enter the existing PIN code for “Change PIN” after
selecting “PIN Entry”, and enter a new PIN code twice.
To Change the PIN2 Code
PIN2 is a second PIN code used to unlock certain
features of a SIM/USIM card, such as Fixed Dialling
and Call Cost metering. Not all SIM/USIM cards use
the PIN2 code. This menu may not be displayed
depending on the type of your SIM/USIM card.
Enter the existing PIN2 code for “Change PIN2”, and
enter a new PIN2 code twice.
Handset Lock
The Handset Lock prevents unauthorised use of the
phone or certain features on the phone when the power
is turned on. By setting this option on, your phone or
certain features on your phone are locked until the
correct handset code is entered.
Select “On” for “Handset Lock” if you wish to activate
the Handset Lock.
Function Lock
By setting this option on, all the functions of your
phone will be locked until the correct handset code is
entered.
Enter your handset code for “Function Lock” if you
wish to activate the Function Lock.
To Turn Off the Function Lock
Enter your handset code in stand-by to turn the
Function Lock off.
134 Settings
Phonebook Lock
The Phonebook Lock function prevents unauthorised
use of your Phonebook.
Select “On” to lock or “Off” to unlock for “Phonebook
Lock” and enter your handset code.
For details on the handset code, see “Changing the
Handset Code”.
Showing Secret Data
By setting this option on, the hidden data can be
displayed.
Select “On” to display or “Off” to hide for “Show
Secret Data”. Enter your handset code when you select
“On”.
For details on the handset code, see “Changing the
Handset Code”.
Changing the Handset Code
The default handset code is “9999”.
Select “Change Handset Code” and enter the old
handset code, then enter a new handset code twice.
Internet Settings (M 9-d-d-4)
Note
• In normal operations, you do not need to change the
settings.
• Internet settings have already been entered in your
phone depending on your service provider. You may
have restrictions on viewing, deleting, copying or
modifying the settings. Contact your service provider
for details.
Browser Settings (M 9-d-d-4-1)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Browser Settings” → “Create New”
“Profile Name”:
WAP profile name (Unique
name)
“Proxy”:
Proxy setting for WAP
(When “Use Proxy” is On)
“Access Point”:
Access point for WAP
(When “Use Proxy” is Off)
“Use Proxy”:
Setting to connect by Proxy
or not
“Home”:
Home page URL (When
“Use Proxy” is Off)
Settings 135
JAVA™ Settings (M 9-d-d-4-2)
“Settings” → “Other Settings” tab → “Internet
Settings” → “JAVA™ Settings” → “Create New”
“Profile Name”:
Profile name for JAVA™
application (Unique name)
“Proxy”:
Proxy setting for JAVA™
application (When “Use
Proxy” is On)
“Access Point”:
Access point for JAVA™
application (When “Use
Proxy” is Off)
“Use Proxy”:
Setting to connect by Proxy
or not
Streaming Settings (M 9-d-d-4-3)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Streaming Settings” → “Create New”
“Profile Name”:
Profile name for streaming
(Unique name)
“Proxy Address”:
Proxy address
“Proxy Port Number”: Port number (1-65535)
“Access Point”:
Access point
136 Settings
Proxy Settings (M 9-d-d-4-4)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Proxy Settings” → “Create New”
“Proxy Name”:
Proxy name (Unique name)
“Proxy Address”:
IP address
“Access Point”:
Access point
“Home”:
Home page URL
“Port Number”:
Port number (1-65535)
“Authentication Type”: Authentication Type
(“HTTP-BASIC” or
“HTTP-DIGEST”)
“User Name”:
User name for
authentication
“Password”:
Password for authentication
Access Point Settings (M 9-d-d-4-5)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Access Point Settings” → “Create New”
“Access Point Name”: Access point name (Unique
name)
“APN”:
APN setting
“Authentication Type”: Authentication type
(“NONE”, “PAP” or
“CHAP”)
“User Name”:
User name for access point
“Password”:
Password for access point
“DNS”:
DNS (Domain Name
System)
“Linger Time”:
Linger Time (1-99999 sec.)
To Activate the Browser/JAVA™/Streaming
Profile
“Settings” → “Other Settings” tab → “Internet
Settings”
1. Select “Browser Settings”, “JAVA™ Settings” or
“Streaming Settings”.
Re-provisioning Settings (M 9-d-d-4-6)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Re-provisioning Settings” → “Execute
Pending”
2. Highlight the desired profile.
3. Press [Options] and select the desired option.
Clearing DNS Cache (M 9-d-d-4-7)
“Settings” → “Other Settings” tab → “Internet
Settings” → “Clear DNS Cache”
2. Select the desired profile you wish to activate.
To Edit/Copy/Delete the Browser/JAVA™/
Streaming/Proxy/Access Point Profile
“Settings” → “Other Settings” tab → “Internet
Settings”
1. Select “Browser Settings”, “JAVA™ Settings”,
“Streaming Settings”, “Proxy Settings” or “Access
Point Settings”.
“Edit”:
“Copy”:
“Delete”:
Modify the desired item
Enter the new file name
Press [Yes] to delete
Settings 137
Network Settings (M 9-d-d-5)
To Select a Service Automatically
Each time the power is turned on, your phone selects a
service automatically.
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Service”
1. Select “Auto”.
To Select a Service Manually
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Service”
1. Select “GSM”.
Note
• If the handset is set to GSM, it will not be able to use
any 3G services (e.g. video callings or high speed
data access).
To Select a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Network” → “Automatic”
138 Settings
To Select the Network Manually
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Network” → “Manual”
1. Select the desired network.
To Add a New Network
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Network” → “Add New
Network”
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following
steps.
1. Select “Add”.
2.
3.
4.
5.
Enter the country code (up to 3 digits).
Enter the network code (up to 3 digits).
Enter a new network name (up to 25 characters).
Enter either 2G (GSM) or 3G for the network type.
To Edit the Preferred List
“Settings” → “Other Settings” tab → “Network
Settings” → “Select Network” → “Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position,
“Add to end” to insert at the end or “Delete” to
delete.
Showing the Network Information
(M 9-d-d-5-3)
“Settings” → “Other Settings” tab → “Network
Settings” → “Network Information”
Information about the operator is displayed.
Settings 139
Call Log (M 11)
The phone will record the last 30 missed calls, received
calls and dialled numbers.
Viewing Call Log
“Call Log”
1. Select from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press D to make a
voice call or long press D to make a video calling.
Tip
• You can also confirm call logs by pressing D in
stand-by.
Sending Messages
1. In the call log list, highlight the phone number or
name you wish to send a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a
New Message” on page 71.
140 Call Log
Deleting a Call Log
1. In the call log list, press [Options] and select
“Delete” or “Delete All”.
Call Timers (M 11-5)
This function lets you check the duration of your calls.
Checking the Duration of the Last Call and All
Calls
“Call Log” → “Call Timers”
1. Select “Dialled Calls” or “Received Calls”.
Resetting Call Timers (M 11-5-3)
“Call Log” → “Call Timers” → “Clear Timers”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
Data Counter (M 11-6)
You can confirm the number of bytes used in the 3G
(UMTS) and GSM transmission.
“Call Log” tab → “Data Counter”
1. Select from “Last Data” or “All Data”.
Resetting All Data Counter (M 11-6-3)
“Call Log” tab → “Data Counter” → “Clear
Counter”
Call Log 141
Connectivity (M 12)
By configuring the settings in this menu, you can
connect to Bluetooth wireless technology enabled
phones, as well as PCs (USB connection is possible
using Data Cable accessory).
Bluetooth (M 12-1)
To Show or Hide Your Phone (M 12-1-2)
“Connectivity” → “Bluetooth” → “Visibility”
1. Select the desired visibility settings.
“Show My Phone”: Allows other devices to
recognise your phone.
“Hide My Phone”:
Hides your phone from
other devices.
For using the Bluetooth wireless function, you need to
search for other Bluetooth wireless technology enabled
devices to establish contact with your phone. Keep your
phone within a distance of 10 metres from the devices
before searching.
To Search for Devices to be Paired (M 12-1-3)
A maximum of 16 devices can be searched for.
“Connectivity” → “Bluetooth” → “Search for
Devices”
1. Select the desired device for pairing.
Using the Bluetooth Wireless Function
2. Enter the device passcode.
To Turn On or Off the Bluetooth Wireless Function
(M 12-1-1)
“Connectivity” → “Bluetooth” → “Switch On/Off”
1. Select “On” or “Off”.
When “On” is selected, the Bluetooth wireless
setting is activated, and “ ” is displayed.
Note
• You can search for devices even when the Bluetooth
wireless function is off. Once pairing is started, the
phone turns the Bluetooth wireless function on
automatically.
• You can only select one device for pairing. To change
the paired device, see “To Activate the Paired
Device”.
• Pairing means authentication has been established
between the two devices.
142 Connectivity
• In order to pair two devices with Bluetooth wireless
technology, the users should agree on the same
passcode for both devices.
• The passcode is used only once, so there is no need to
remember it. The passcode can be different each time
the devices are connected.
• Devices that do not have a user interface (i.e.,
headsets and car kits) have a factory-set passcode.
See the user guide for the device.
Tip
• You can save battery power by turning the Bluetooth
wireless function off while it is not in use. Turn the
Bluetooth wireless function off in “To Turn On or Off
the Bluetooth Wireless Function” on page 142 or in
“To Turn Off Automatically” on page 145.
• During a call, you can divert voice calls to the paired
handsfree device. Press [Options], select “Transfer
Audio” and then “To Handset” or “To Bluetooth”.
To Activate the Paired Device
Paired devices are listed by tabs for all devices for
handsfree devices and for Audio devices.
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
To Check the Paired Handsfree Devices
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Highlight the desired handsfree device.
3. Press B to check the handsfree device.
Connectivity 143
To Check the Audio Device
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press d twice to switch to the list for Audio
devices.
2. Highlight the desired Audio device.
3. Press B to check the Audio device.
To Rename or Delete the Paired Devices
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press c or d to switch between all paired devices
and handsfree devices.
2. Highlight the desired device.
3. Press [Options].
4. Select “Change Name” or “Delete”.
You can rename or delete by pressing B after
selecting desired device.
144 Connectivity
To Send All Data to Other Devices (M 12-1-5)
You can send all the data for applications such as
Phonebook, Calendar, Tasks to selected devices.
“Connectivity” → “Bluetooth” → “Send All”
1. Select the desired device.
If a device is not specified, searching starts
automatically.
2. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
3. Select the desired data to send.
4. Enter the device passcode for unpaired devices.
Note
• If the handsfree device is connected, the confirmation
screen to deactivate the handsfree function is
displayed. Press [Yes] to deactivate.
Bluetooth Wireless Settings (M 12-1-6)
With this setting you can rename your phone, prevent
other devices from recognising your phone and turn the
Bluetooth wireless function off automatically to save
battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown on
other devices when your phone is detected.
“Connectivity” → “Bluetooth” → “Bluetooth
Settings” → “Device Name”
1. Enter the new device name.
To Turn Off Automatically
“Connectivity” → “Bluetooth” → “Bluetooth
Settings” → “Bluetooth Timeout”
1. Select the desired time.
Your phone turns the function off automatically
after the specified time.
To Select the Sound Output
“Connectivity” → “Bluetooth” → “Bluetooth
Settings” → “Sound Output”
1. Select “Phone/Earphone” or “Bluetooth Device”.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the
phone.
“Connectivity” → “Bluetooth” → “Bluetooth
Settings” → “Handsfree Setting”
1. Select “Handsfree mode” or “Private mode”.
“Handsfree mode”: For talking with the handsfree
kit
“Private mode”:
For talking with the phone
To Turn the Authentication Request On or Off
You can request the sender or receiver of the data to
authenticate the passcode (exchanging the passcode)
before pairing devices.
“Connectivity” → “Bluetooth” → “Bluetooth
Settings” → “Authentication”
1. Select “On” or “Off”.
Note
• No authentication is required for the paired devices.
• Even if you select “Off”, you may authenticate the
passcode when the sender requests it.
To See Your Phone Details
“Connectivity” → “Bluetooth” → “Bluetooth
Settings” → “My Phone Details”
Connectivity 145
Mass Storage (M 12-2)
You can set the phone to connect to a PC via Mass
Storage mode.
“Connectivity” → “Mass Storage”
1. Press [Yes].
Note
• Activating Mass Storage mode also activates offline
mode.
• Mass Storage is not available when the battery is low,
a Java™ application is paused, Music Player is
active, or a memory card is not inserted in your phone.
USB Charge (M 12-3)
You can set the phone to charge via USB, connected to
a PC.
“Connectivity” → “USB Charge”
1. Select “Enable” or “Disable”.
Card Settings (M 12-4)
Formatting Memory Card
“Connectivity” → “Card Settings” → “Format Card”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
146 Connectivity
2. Press [Yes] to start formatting.
Off Line Mode (M 12-5)
When the Off Line Mode is set to “On”, the phone cuts
off the network connections and stops searching for
available networks to connect. With this mode, you can
play games or music even when you fly.
“Connectivity” → “Off Line Mode”
1. Select “On” or “Off”.
Backup/Restore (M 12-6)
With a memory card inserted in your phone, you can
make backup files of Bookmarks, Text, Phonebook,
Calendar and Tasks in the handset memory to the
memory card. You can also restore the backup data
from the memory card.
Making a Backup File (M 12-6-1)
“Connectivity” → “Backup/Restore” → “Backup”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
2. Select the desired item to back up or “Select All” to
back up all files.
Restoring a Backup File (M 12-6-2)
“Connectivity” → “Backup/Restore” → “Restore”
1. Enter your handset code.
For details on the handset code, see “Changing the
Handset Code” on page 135.
2. Select the desired item to restore or “Select All” to
restore all files.
3. Select the desired file to restore.
A confirmation message indicating deletion from
the handset memory is displayed.
4. Press [Yes] to start restoring.
Note
• To delete a backup file, highlight the desired item,
press [Options] and select “Delete” after performing
steps 1 to 3.
Connectivity 147
Connecting WX-T82 to Your
PC
You can use the following functions by connecting the
WX-T82 to your PC using a USB data cable or via
Bluetooth wireless technology:
• 3G/GSM modem
• Handset Manager for WX-T82
• Music Manager for WX-T82
• Sync Manager for WX-T82
System Requirements
Operating System:
Windows 2000*, Windows XP**,
Windows Vista
* Service Pack 4 or later
** Service Pack 2 or later
Supported Software:
Microsoft Outlook/Outlook Express
Interface:
USB port or Bluetooth wireless port
CD-ROM drive
To use Music Manager, DirectX9 and Windows Media
Player 9 or later are required.
148 Connecting WX-T82 to Your PC
3G/GSM Modem
You can use WX-T82 as a 3G/GSM modem to access
the Internet from your PC. Connect your phone to your
PC via Bluetooth wireless technology or USB interface.
Software installation on your PC is required.
Modem via the USB Data Cable
1. Insert the CD-ROM into your PC’s
CD-ROM drive.
The WX-T82 CD-ROM screen is displayed.
If the WX-T82 CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
2. Select the USB driver from the on-screen
instructions of your CD-ROM, and start installation
of USB driver software following the on-screen
instructions of your CD-ROM.
• During installation, the on-screen instructions ask
you to connect your phone to your PC. Power on
your phone and attach the phone to the USB port
of your PC using the USB data cable (optional
accessory).
3. Follow the on-screen instructions to complete
installation.
4. Select the modem driver from the on-screen
4. Select the modem driver from the on-screen
instructions of your CD-ROM, and install modem
driver software following the on-screen instructions
of your CD-ROM.
instructions of your CD-ROM, and install modem
driver software following the on-screen instructions
of your CD-ROM.
5. Follow the on-screen instructions to use your phone
5. Follow the on-screen instructions to use your phone
as a modem driver.
• When the on-screen instructions ask modem
driver type, select the cable as a modem driver.
Modem via Bluetooth Connection
1. Turn on the Bluetooth wireless function of your
phone.
For details, see “To Turn On or Off the Bluetooth
Wireless Function” on page 142.
2. Pair your PC with your phone.
For details on pairing your PC with your phone, see
“To Search for Devices to be Paired” on page 142.
3. Insert the CD-ROM into your PC’s CD-ROM drive.
The WX-T82 CD-ROM screen is displayed.
If the WX-T82 CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
as a modem driver.
• When the on-screen instructions ask modem
driver type, select Bluetooth as a modem driver.
Note
• Modem communication is not possible while
communicating with the Handset Manager via
Bluetooth wireless technology or USB interface.
• It is not recommended that you make or answer calls
when you are using WX-T82 as a GSM/GPRS
modem. The operation may be interrupted.
• Your phone exhausts the battery when connected to a
PC, even when not communicating.
• For a detailed explanation on how to use the Modem
driver, please click and refer to the help on the
Modem Driver.
Connecting WX-T82 to Your PC 149
Handset Manager
3. Follow the on-screen instructions to complete
You can transmit the following items between your
phone and your PC, and can use Phonebook entries on
your PC:
• Gallery files (pictures/sounds/video clips/Other
Documents data)
• Phonebook entries
• Short messages
• Schedule entries
installation.
• During installation, the on-screen instructions
ask you to select an interface. Select the USB
data cable as an interface.
4. Connect your phone to your PC. Power on your
phone and attach the phone to the USB port of your
PC using the USB data cable (optional accessory).
5. Select [Yes] for Mass Storage mode.
Via USB Data Cable
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The WX-T82 CD-ROM screen is displayed.
If the WX-T82 CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen
instructions of your CD-ROM, and start installation
of Handset Manager software following the
on-screen instructions of your CD-ROM.
• If you have not installed the USB driver, follow
steps 2 and 3 on page 148.
For details on activating this mode, see “Mass
Storage” on page 146.
6. Launch Handset Manager from the relevant folder.
150 Connecting WX-T82 to Your PC
7. Follow the on-screen instructions of Handset
Manager.
For details, see the User Guide Software which is
installed within Handset Manager or our web-site,
http://www.sharp-mobile.com.
Via Bluetooth
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The WX-T82 CD-ROM screen is displayed.
If the WX-T82 CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen
instructions of your CD-ROM, and start installation
of Handset Manager software following the
on-screen instructions of your CD-ROM.
3. Follow the on-screen instructions to complete
installation.
• During installation, the on-screen instructions
ask you to select an interface. Select Bluetooth as
an interface.
4. Select [Yes] for Mass Storage mode.
For details on activating this mode, see “Mass
Storage” on page 146.
5. Launch Handset Manager from the relevant folder.
Note
• Some large files may not be able to be transmitted
from the PC to the phone.
• Applications (Camera, Gallery, etc.) do not run when
the phone is connected to the PC via Bluetooth
wireless technology interface or USB data cable.
• If you have already installed Sharp Handset
Manager, you need to uninstall the previous one.
• If you have trouble with installation, uninstall
Handset Manager, restart your PC, reinstall Handset
Manager and restart.
Music Manager
You can manage the playlist and exchange sound files
on your PC. Available files are the sound files in the
following formats: MP3, AAC, 3GPP.
Tip
• MP3 files with two or more periods (“.”) used in the
file name cannot be saved.
6. Follow the on-screen instructions of Handset
Manager.
For details, see the User Guide Software which is
installed within Handset Manager or our web-site,
http://www.sharp-mobile.com.
Connecting WX-T82 to Your PC 151
Main Control Panel
Play
Previous
Next
Add Playlist
Add Smart Playlist
Remove Playlist
Search Media File
Browse
Input Window
Media Management
in PC
Media Management
in Handset
Main Control Panel
Control all the main actions from here.
Play:
Playing back a file.
Previous:
Returns to the top portion of the
current file.
Next:
Jumps to the next file.
Search Media File: Search media file.
Browse:
Browse all the media files sorted
in Genre/Artist/Album.
Input Window:
Quickly find the media files in
Library or the playlist with
keyword entry.
152 Connecting WX-T82 to Your PC
Media Management in PC
Media files in PC can be easily explored in 2 main
columns.
Add Playlist:
Creating new playlist.
Add Smart Playlist: Creating new smart playlist.
Remove Playlist: Removing playlist.
Media Management in Handset
Media files in Handset can be easily explored in 2
main columns.
• With the drag and drop operation, you can upload the
sound files and the playlists from your PC, and also
download them to your PC.
• With the drag and drop operation, you can change the
order of tracks in the playlist of your PC.
• You can create a new playlist and delete an existing
playlist.
• With the drag and drop operation, you can add a
sound file to a playlist, and delete them from the
playlist.
• You can edit the name of a playlist of your PC.
• You can edit the title, artist name, and album name of
sound files of your PC. (only available in MP3
format)
Tip
• To add tracks from your PC into the Music Manager
library, go to “Advanced” then search music tracks.
• Once you have created your list, drag the list to the
WX-T82 area on Music Manager, and the files will be
uploaded to the WX-T82. If one or more of the files is
already stored on the handset, Music Manager will
not upload them again; the playlist will play the track
already uploaded.
• Music Manager also allows you to import existing
playlists (M3U file type) that you may have created
using other media programs.
• Use Smart Playlist to automatically add tracks to a
playlist based on criteria you can select.
Sync Manager
You can synchronise the following data with the data of
Microsoft Outlook or Outlook Express on your PC.
• Phonebook entries.
• Schedule entries.
Tip
• You can set up Sync Manager to start up and
synchronise automatically after you connect your
phone to your PC via the USB data cable.
Connecting WX-T82 to Your PC 153
Troubleshooting
Problem
The phone does not
turn on.
PIN code or PIN2
code is rejected.
The SIM/USIM card
becomes locked.
Problem
Solution
• Make sure the battery is
properly inserted and
charged.
• Make sure you have entered
the correct code (4 to 8
digits).
• Your SIM/USIM card/
protected functions will
become locked after three
unsuccessful attempts.
• Contact your SIM/USIM
provider if you do not have
the correct PIN code.
• Enter the PUK code (8 digits)
provided by your service
provider (if supported).
• If the attempt is successful,
enter the new PIN code and
confirm your phone is
operational again. Otherwise
contact your dealer.
154 Troubleshooting
The display is
difficult to read.
Phone functions do
not work after the
phone is turned on.
Call quality is poor.
Cannot send or
receive text
message.
Solution
• Adjust the backlight
brightness for the display.
• Check the radio signal
strength indicator as you may
be outside the service area.
• Check to see if any error
message is displayed when
you turn your phone on. If so,
contact your dealer.
• Make sure the SIM/USIM
card is correctly inserted.
• Your current location may not
provide good call quality (i.e.,
in a car or train). Move to a
location where radio signal
strength is greater.
• Make sure you are correctly
subscribed for the Short
Message Service, that the
network supports this service,
and that the centre number is
set up correctly. If not, contact
your network service
provider.
Problem
Calls cannot be
made or received.
Cannot access
network service.
Limited memory
available.
Solution
• If the message “Insert SIM
card” is displayed when the
phone is switched on, you
cannot use your SIM/USIM
card or the SIM/USIM card is
damaged. Contact your
dealer or network service
provider.
• Check your call barring, fixed
dialling setting, remaining
battery and call forwarding
settings.
• Check if your phone is
currently performing data
communication using
Bluetooth wireless
technology interface or a USB
data cable.
• Check the remaining balance
if you are using a pre-paid
SIM/USIM card.
• Check where your account
has been registered and
where the service is
available.
• Delete any unnecessary data.
Problem
Cannot connect to
Multimedia
Messaging Service
provider.
Call is terminated
unexpectedly.
No entries are
displayed in the
Phonebook.
Cannot receive
OBEX data.
Solution
• MMS settings and
configuration may be missing
or incorrect or the network
does not support it. Check
your service provider’s
access point number.
Contact your service provider
to confirm the correct
settings.
• Magnetised objects such as
health necklaces placed near
the phone may terminate the
call. Keep your phone away
from such objects.
• Confirm that the Source
setting (Handset or SIM/
USIM) is correct.
• The OBEX data can only be
received in stand-by.
Troubleshooting 155
Safety Precautions and
Conditions of Use
Your phone conforms to international regulations
insofar as it is used under normal conditions and in
accordance with the following instructions.
Conditions of Use
Electromagnetic waves
• Do not switch on your phone aboard an aircraft (as
your phone may interfere with the aircraft’s
electronic systems). Current legislation forbids this
use and legal action can be taken against the user.
• Do not switch on your phone in a hospital, except in
designated areas.
• Use of your phone’s function may affect the
performance of medical electronic units
(pacemakers, hearing aids, insulin pumps, etc.).
When the phone function is on, do not bring it near
medical equipment or into areas in which medical
equipment is being used. If you have a hearing aid or
a pacemaker, only use the phone on the opposite side
of your body from where it is located. The phone
should be kept at least 6 inches (15.24 cm) from a
pacemaker ANYTIME the phone is switched on.
156 Safety Precautions and Conditions of Use
• Do not switch on your phone near gas or flammable
substances.
• Observe the rules concerning the use of mobile
phones at gasoline stations, chemical plants and at all
sites where a risk of explosion exists.
Caring for your phone
• Do not allow children to use your phone without
supervision.
• Do not open or attempt to repair your phone yourself.
The product can only be repaired by authorised
service personnel.
• Do not drop your phone or subject it to severe
impacts. Bending the body and pushing the display or
keys with extreme force could damage the phone.
• Do not use solvents to clean your phone. Use only a
soft, dry cloth.
• Do not carry your phone in your back pocket as it
could break when you sit down. The display is made
of glass and is particularly fragile.
• Avoid touching the external connector on the left side
of the phone, since the delicate components within
can be damaged by static electricity.
Battery
• Use your phone only with batteries, chargers and
accessories recommended by the manufacturer. The
manufacturer disclaims any liability for damage
caused by the use of other chargers, batteries or
accessories.
• Network configuration and phone usage will
affect talk-time and stand-by time.
Using the games or camera will hasten battery
consumption.
• When the battery charging alert is displayed on
the screen, charge the battery as soon as possible.
If you continue using your phone ignoring the alert,
the phone may cease to function, and all data and
settings you have stored may be lost at any moment.
• Before removing the battery from the phone, make
sure the phone is switched off.
• Replace and charge the new battery as soon as
possible after removing the old one.
• Do not touch the battery terminals. Batteries can
cause damage, injury or burns if a conductive
material touches exposed terminals. When the battery
is detached from the phone, use a cover made of
non-conductive material for keeping and carrying the
battery safely.
• Recommended temperature for using and storing
batteries is approximately 20°C.
• The batteries’ performance is limited in low
temperatures, particularly below 0°C and the phone
may not work temporarily regardless of the amount
of remaining battery power.
• Exposing the phone to extreme temperatures will
shorten battery life.
• The battery can be charged and discharged hundreds
of times but it will eventually wear out. When the
operating time (talk-time and stand-by time) is
noticeably shorter than normal, it is time to buy a new
battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
See “Battery Disposal” on page 16.
Safety Precautions and Conditions of Use 157
Aerial Care
• Do not cover the top of the phone (p. 13, No. 22) with
your hand when in use as this may interfere with the
performance of the built-in aerial. Call quality may
deteriorate leading to shortened talk-time and
stand-by time because the mobile phone has to
operate on a higher power level than is necessary.
• Use only the aerial supplied or one approved by
Sharp for your mobile phone. Using unauthorised or
modified aerials may damage the mobile phone.
Moreover, since the mobile phone may violate the
appropriate regulations, it may lose performance or
exceed the limitation of SAR levels.
• To avoid impaired performance, do not damage the
aerial of the mobile phone.
• To avoid interfering with blasting operations, please
turn off the mobile phone in a blasting area or in a
place where a “turn off two-way radio” sign is
posted.
158 Safety Precautions and Conditions of Use
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
• Be careful not to move your hand while taking
pictures.
If the phone moves while taking a picture, the picture
can become blurred. When taking a picture, hold the
phone firmly to prevent it from moving, or use the
delay timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear
focusing. Wipe them off with a soft cloth before
taking a picture.
Others
• As with any electronic storage unit, data may be lost
or corrupted under various circumstances.
• Before connecting the phone with a PC or a
peripheral unit, read the operation manual for the
other unit carefully.
• If the phone’s battery has been removed for some
time, or the phone has been reset, the unit’s clock and
calendar may be reinitialised. The date and time
should be updated in this case.
Environment
• Keep your phone away from extreme heat. Do not
leave it on the dashboard of a car or near a heater. Do
not leave it in any place that is extremely damp or
dusty.
• Since this product is not waterproof, do not use it or
store it where fluids such as water can splash onto it.
Raindrops, water spray, juice, coffee, steam,
perspiration, etc. will also cause malfunctions.
Precautions Concerning Vehicle Use
• It is the user’s responsibility to check the local laws
governing the use of a mobile phone in vehicles. Pay
full attention to driving. Pull off to the side of the
road, park the car, and switch off the engine before
making or answering a call.
• Use of your phone’s function may interfere with the
vehicle’s electronic systems, such as the ABS
anti-lock brakes or the air-bag. To ensure no such
problem occurs, please check with your dealer or car
manufacturer before connecting your phone.
• Only allow qualified service maintenance personnel
to install the vehicle accessories.
The manufacturer disclaims any liability for damage
which may result as a consequence of improper use or
use contrary to the instructions contained herein.
SAR
Your Sharp mobile phone has been designed,
manufactured and tested so as not to exceed the limits
for exposure to electromagnetic fields as required by
the DGT. These limits are part of comprehensive
guidelines developed by independent scientific
organisations. The guidelines include a substantial
safety margin designed to assure the safety of the phone
user and others and to take into account variations in
age and health, individual sensitivities and
environmental conditions. The DGT rules provide for
the amount of radio frequency electromagnetic energy
absorbed by the body when using a mobile phone to be
measured by reference to the Specific Absorption Rate
(SAR). The SAR limit for the general public is
currently 2.0 watts per kilogram averaged over 10
grams of body tissue. Your Sharp mobile phone SAR
value is 0.742 W/kg. This has been tested to ensure that
this limit is not exceeded even when the phone is
operating at its highest certified power. In use however
your Sharp mobile phone may operate at less than full
power because it is designed to use only sufficient
power to communicate with the network.
Safety Precautions and Conditions of Use 159
FCC NOTICE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by
the manufacturer responsible for compliance could
void the user’s authority to operate the equipment.
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE
GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on standards that
were developed by independent scientific organizations
through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health.
160 Safety Precautions and Conditions of Use
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg.* Tests for SAR are conducted using
standard operating positions specified by the FCC with
the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels so
as to use only the power required to reach the network.
In general, the closer you are to a wireless base station
aerial, the lower the power output.
Before a phone model is available for sale to the public,
it must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model. The
highest SAR value for this model phone when tested for
use at the ear is 0.417 W/kg and when worn on the
body, as described in this user guide, is 0.462 W/kg.
Body-worn Operation; This device was tested for
typical body-worn operations with the back of the
phone kept 1.5 cm from the body. To maintain
compliance with FCC RF exposure requirements, use
accessories that maintain a 1.5 cm separation distance
between the user’s body and the back of the phone. The
use of belt-clips, holsters and similar accessories should
not contain metallic components in its assembly.
The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure
requirements, and should be avoided. While there may
be differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID APYHRO00060.
Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA)
web-site at http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/
kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for
any variations in measurements.
Safety Precautions and Conditions of Use 161
Out of Warranty List
This limited warranty shall not apply in respect of the
following:
(i) Any deterioration due to normal wear and tear
including all plastic surfaces and all other
externally exposed parts that are scratched or
damaged due to normal customer use.
(ii) Defects caused by the Product being subjected to
any of the following: use in contradiction with the
user guide, rough handling, exposure to moisture,
dampness or extreme thermal or environmental
conditions or rapid changes in such conditions,
corrosion, oxidation, unauthorised modifications
or connections, unauthorised opening or repair,
repair by use of unauthorised spare parts, misuse,
improper installation, accident, forces of nature,
spillage of food or liquid, influence from chemical
products or other acts beyond Sharp’s reasonable
control (including but not limited to lifetime, and
breakage of or damage to aerials) unless the defect
was caused directly by defects in materials or
workmanship.
(iii) Products in respect of which the product serial
number or the IMEI number has been removed,
erased, defaced, altered or made illegible.
162 Out of Warranty List
(iv) Defects caused by the fact that the Product was
used with or connected to a product or an
accessory not manufactured or supplied by Sharp
or was used other than for its intended use.
(v) Defects caused by a defective function of the
cellular network.
(vi) Defects caused by the fact that the battery was
short-circuited or seals of the battery enclosure or
cells were broken or show evidence of tampering
or the battery was used in equipment other than
for which it has been specified.
(vii) Defects caused by the need to upgrade Products
software due to changes in cellular network
parameters.
(viii) Products operated outside published maximum
ratings.
(ix) Products rented on a monthly basis.
Charger Plug:
Do not use the AC Charger if the plug does not fit the
socket.
Index
A
Alarms 105
Area Info 78
B
Battery 15, 157
C
Calculator 110
Calendar 101
Call Functions 25, 140
Auto Redial 132
Call Restrictions 130
Call Timers 132, 140
Call Waiting 28, 129
Conference Call 28
Data Counter 141
Earpiece Volume 27
Emergency Calls 25
International Calls 25
Make Another Call 27
Minute Minder 131
Muting the
Microphone 30,
31, 133
My Phone
Number 129
Redialling 26
Rejecting a Call 27,
31, 131
Sending a Busy
Tone 27, 31
Speaker 27, 32, 132
Speed Dialling 26, 53
Video Calling 31, 132
Voice Call 25, 27
Voicemail &
Diverts 128
Call Log 140
Camera 62
Continuous Shoot 67
Digital Zoom 63
Display Direction 64
Exposure 63
Focus Mode 64
Picture Quality 64
Picture Size 66, 69
Recording Time 69
Recording Video
Clips 63, 69
Settings 63
Shortcut Keys 66
Switching Modes 65
Taking Pictures 62
Video Encoding 69
Video Quality 64
Cell Broadcasts 77
Characters
Changing the Input
Method 36
Chinese User
Dictionary 41
Cutting, Copying,
Pasting Text 43
Entering Characters 35
Input Language 36
Stroke mode 40
Text Templates 43, 91
Chinese User
Dictionary 41
Creating 41
Deleting 41
Editing 41
Conditions of Use 156
Connectivity 142
Countdown Timer 109
D
Display Indicators 22
E
Expenses Memo 113
F
FET Mobile Internet 83
Browser Settings 85
Navigating a WAP or
Web Page 84
FM Radio 60
G
Gallery 88
Other Documents 92
Games & Applications 96
Java™ Settings 98
H
Handset Code 135
Help 114
K
Keypad Lock 21
M
Main Menu 44
Mass Storage 146
Master Reset 127
Index 163
Memory Card 18, 146
Memory Status 54, 95,
104, 108
Messaging 70
Attaching/Removing
Data 73
Creating a Message 71
Drafts Box 74
Email 70, 82
Forwarding a
Message 76
Mailing List 49
MMS 70, 75, 80
Reading a Message 74
Replying to a
Message 76
Sending Options 73
Settings 78
SMS 70, 79
Video Clip
Message 74
Voice Clip
Message 74
Multimedia 55
Music Player 57
Adding a File 59
164 Index
Adding a New
Playlist 57
Downloading
Music 60
Playing Back
Music 58
Sorting 59
N
Navigating Functions 24
O
Off Line Mode 146
Organiser 101
P
PC Connection 148
Phonebook
Adding New Entry 45
Category 53
Dialling from an
Entry 47
Editing Entries 50
Group 49
Saving a Number 46
Saving an Address 75
Saving an Image 89
Searching the List 46
Sending a Message 48,
49
Storage Memory 45
Thumbnail 50
Phonebook Lock 135
Pictures 88
PIN/PIN2 Code 134
Power On and Off 20
S
Safety Precautions 156
Screensavers 100
Settings 116
Date & Time 126
Display 121
Internet 135
Language 127
Network 135
Profiles 116
Security 133
Shortcuts 127
Slider 125
Sound 125
SIM Application 115
SIM/USIM Card 15
Sound Gallery 90
Stopwatch 106
Streaming 57
T
T9 Text Input
Using BoPoMoFo
input mode 39
Using Stroke mode 40
Using T9 English
Mode 37
Tasks 106
Themes 90
Troubleshooting 154
U
USB Charge 146
V
Video Gallery 55, 89
Adding a File 55
Adding a New
Playlist 56
Downloading
Video 56
Playing Back Video 55
Searching a File 55
Settings 56
Voice Recorder 111
W
World Clock 109
Messages
Quick Reference
WX-T82
Press B during stand-by
and select “Message”.
Press a or b to scroll.
Press B.
Create Message
Function Key Shortcuts
To display the Main
B
menu.
To mute and unmute the C [Mute]
microphone during a call.
To turn Silent mode on. Long press R.
Message
E-Mail
Special Features
1. Press the side-up or
side-down key.
2. Press the side-up key
To adjust earpiece
and then a, press the
volume during a call
side-down key and then
b, then press B.
B QK, then select
To display:
“Received
Calls” and
Individual Call Timer
“Dialled Calls.”
Reset Call Timer
B QK, then select
“Clear Timers”.
Cell Broadcasts
Switch On/Off
Read Messages
Settings
On
Off
Messaging Settings
Up
3.
4.
1.
2.
3.
1.
1.
General Settings
SMS Settings
MMS Settings
Email Settings
Right
Down
Call Voicemail
Voicemail Settings
1.
2.
Area Info
Navigating Menus
Press B to display the Main menu.
Left
Inbox
Alert Inbox
Drafts
Templates
Sent
Outbox
Voice Mail
Basic Operation
Long press F.
Enter number, press D.
Press D.
Press F.
Phonebook
Storing name and number
Enter the mobile number in stand-by.
Press A [Options], select “Save Number” & “As
New”.
Fill each field.
Press C [Save].
Camera/Video
Taking pictures/Recording video clips
Press B, select “Camera”.
Press dc to switch between photo and video
camera modes.
Press B or the side keys to take a picture or
video.
Voice Recorder
Press B, select “Organiser”, press d, then
select “Voice Recorder”.
Voice Mail
Long press G (FET Voice Mail as default
setting). Alternatively, direct dial HHH (FET
Voice Mail as default setting).
Power On/Off
Make a call
Answer a call
End a call
A
C
Memory Status
Quick Reference 165
166 Quick Reference
WX-T82 Quick Reference Menu
Video Player
Streaming Player
Music Player
FM-Radio
a b
10 SIM Application
7-1
7-2
7-3
7-4
d
c
d
c
d
c
Create Message
Inbox
Alert Inbox
Drafts
c
Templates
Sent
Outbox
d
Voice Mail
Cell Broadcasts
Area Info
Messaging Settings
Memory Status
a b
7 Audiovisual
4-1
4-2
4-3
4-4
4-5
4-6
4-7
4-8
4-9
4-10
4-11
4-12
a b
4 Messages
1-1 Java™ Gallery
1-2 Java™ Settings
1-3 Java™
Information
1 Java™
11-1
11-2
11-3
11-4
11-5
11-6
11-7
All Calls
Dialled Numbers c
Missed Calls
Received Calls
d
Call Timers
Call Costs
Data Counter
a b
11 Call Log
(Tab 1: Phonebook)
8-1 Phonebook
8-2 Add New
8-3 My Card
(Tab 2: Services)
8-1 Call Voicemail
8-2 Speed Dial List
c
8-3 Service Dialling
Number
d
8-4 FDN
(Tab 3: Settings)
8-1 Manage Groups
8-2 Message Groups
8-3 Phonebook
Settings
8-4 Advanced
a b
8 Call Manager
d
c
Homepage
Go to URL
Bookmarks
Alert Inbox
My Saved Page c
Access History
Browser Settings d
a b
5 Camera
2-1
2-2
2-3
2-4
2-5
2-6
2-7
2 FET Mobile Internet
Press B during stand-by mode.
Press a, b, c or d to navigate to required location.
12-1
12-2
12-3
12-4
12-5
12-6
Bluetooth
Mass Storage
USB Charge
Card Settings
Off Line Mode
Backup/Restore
a b
12 Connectivity
(Tab 1: Profiles)
(Tab 2: Phone Settings)
9-1 Display Settings
9-2 Sound Settings
9-3 Slider Settings
9-4 Date & Time
9-5 Language
9-6 Shortcuts
9-7 Switch Ringtone Output
9-8 Earpiece Volume
9-9 Master Reset
(Tab 3: Applications)
9-1 Call Settings
9-2 Video Calling Settings
9-3 Security Settings
9-4 Internet Settings
9-5 Network Settings
Picture Gallery
Video Gallery
SD VIDEO
Sound Gallery
Themes
Java™ Gallery
Text Templates
Other Documents
Memory Status
a b
9 Settings
6-1
6-2
6-3
6-4
6-5
6-6
6-7
6-8
6-9
a b
6 Gallery
(Tab 1: Organiser)
3-1 Calendar
3-2 Alarms
3-3 Stopwatch
3-4 Tasks
3-5 World Clock
3-6 Countdown Timer
(Tab 2: Utilities)
3-1 Calculator
3-2 Voice Recorder
3-3 Scanner
3-4 Expenses Memo
3-5 Phone Help
3 Organiser
English user manual:
Maker: SHARP CORPORATION
Importer: FarEasTone Telecommunications Co., Ltd.
Address: 468, Ruei Guang Rd., Nei Hu, Taipei Taiwan
Tel: +886 2 8793 5000
www.fetnet.net
FarEasTone mobile customers please dial 888 for customer services