NP-S2000_OM_G_cv1_4.fm Page 1 Wednesday, June 22, 2011 5:03 PM
G
Network Player
Lecteur Réseau
© 2010 Yamaha Corporation
Printed in Malaysia WV33240-2
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRNUIKSAANWIJZIG
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
HiFi Began with Yamaha
Yamaha’s involvement with and passion for music goes back
more than a century, to when we built our first reed organ in
1887. Now we are the world’s leading producer of pianos and
other musical instruments, and are involved with music in many
other ways as well. We manufacture professional recording
equipment, we design concert halls and we assist artists at
concerts with set up and sound tuning.
This knowledge and experience benefits our production of
audio components in many ways. We introduced our first HiFi
(High Fidelity) turntable in 1955. Thereafter we were one of the first
to offer mass-produced, high quality audio equipment,
and introduced many legendary stereo components.
We hope you enjoy the genuine HiFi experience of
Yamaha Natural Sound.
i En
Excellence in Audio Achievement
1922: We introduced a high-quality handwound phonograph.
Since 1955, we have released many HiFi
components, including turntables, tuners,
integrated amplifiers, control amplifiers,
power amplifiers and speakers.
NS-20
CA-1000
NS-690
NS-1000M
B-1
C-2
PX-1
NS-10M
NS-20 Monitor Speaker
CA-1000 Integrated Amplifier
Featuring A-Class operation, the CA-1000 set
the standard for integrated amplifiers.
NS-690 Monitor Speaker
NS-1000M Monitor Speaker
A truly legendary speaker still revered by HiFi enthusiasts
B-1 Power Amplifier
An innovative power amp that used FETs in all stages
C-2 Control Amplifier
Received top prize at the Milan International Music
and HiFi Show.
NS-10M Studio Monitor Speaker
Became of the most popular studio monitors in the world.
A-1 Integrated Amplifier
PX-1 Turntable
Yamaha’s first linear tracking turntable
B-6 Power Amplifier
Pyramid-shaped power amplifier with X power supply and
X amplifier
GT-2000/L Turntable
Ultra-precise heavyweight player embodying GT concept
CD-1 CD Player
First CD Player introduced in 1983
B-6
GT-2000
B-2x Power Amplifier
MX-10000 Power Amplifier and
CX-10000 Control Amplifier
Amplifier that redefined the capabilities of separate
components
100th anniversary model
AX-2000
GT-CD1
Soavo-1
Soavo-2
AX-2000 Integrated Amplifier
High S/N ratio (128 dB), digital direct function equipped
GT-CD1 CD Player
Top-loading type player with integrated separate structure
MX-1 Power Amplifier and CX-1 Control
Amplifier
Soavo-1 and Soavo-2 Natural Sound
Speaker Systems
A-S1000 Stereo Amplifier and
CD-S1000 Super Audio CD Player
English
A-S2000 Stereo Amplifier and
CD-S2000 Super Audio CD Player
ii En
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this sound system in a well ventilated, cool, dry,
clean place - away from direct sunlight, heat sources,
vibration, dust, moisture, and/or cold. For proper
ventilation, allow the following minimum clearances
around this unit.
Top: 10 cm (4 in)
Rear: 10 cm (4 in)
Sides: 10 cm (4 in)
Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
Do not expose this unit to sudden temperature changes
from cold to hot, and do not locate this unit in an
environment with high humidity (i.e. a room with a
humidifier) to prevent condensation inside this unit,
which may cause an electrical shock, fire, damage to this
unit, and/or personal injury.
Avoid installing this unit where foreign object may fall
onto this unit and/or this unit may be exposed to liquid
dripping or splashing. On the top of this unit, do not
place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e. candles), as they may cause fire,
damage to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall and
liquid may cause electrical shock to the user and/or
damage to this unit.
Do not cover this unit with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this unit rises, it may cause fire,
damage to this unit, and/or personal injury.
Do not plug in this unit to a wall outlet until all
connections are complete.
Do not operate this unit upside-down. It may overheat,
possibly causing damage.
Do not use force on switches, knobs and/or cords.
When disconnecting the power cable from the wall outlet,
grasp the plug; do not pull the cable.
Do not clean this unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
Only voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is dangerous
and may cause fire, damage to this unit, and/or personal
injury. Yamaha will not be held responsible for any
damage resulting from use of this unit with a voltage
other than specified.
To prevent damage by lightning, keep the power cable
and outdoor antennas disconnected from a wall outlet or
this unit during a lightning storm.
Do not attempt to modify or fix this unit. Contact
qualified Yamaha service personnel when any service is
needed. The cabinet should never be opened for any
reasons.
When not planning to use this unit for long periods of
time (i.e. vacation), disconnect the AC power plug from
the wall outlet.
iii En
16 Be sure to read the “Troubleshooting” section on
common operating errors before concluding that this unit
is faulty.
17 Before moving this unit, press the power switch (on the
main unit) downward to turn off this unit and then
disconnect the AC power plug from the AC wall outlet.
18 Condensation will form when the surrounding
temperature changes suddenly. Disconnect the power
cable from the outlet, then leave this unit alone.
19 When using this unit for a long time, this unit may
become warm. Turn the power off, then leave this unit
alone for cooling.
20 Install this unit near the AC outlet and where the AC
power plug can be reached easily.
21 The batteries shall not be exposed to excessive heat such
as sunshine, fire or the like. When you dispose of
batteries, follow your regional regulations.
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this
unit by the power switch (on the main unit).
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING
THE POWER SUPPLY CABLE OF THIS UNIT MUST BE
CONNECTED TO THE MAIN SOCKET OUTLET VIA A
PROTECTIVE EARTHING CONNECTION.
CONTENTS
SUPPLIED ACCESSORIES .............................................................................................................. 2
GENERAL FLOWCHART ............................................................................................................... 3
SYSTEM STRUCTURES................................................................................................................... 4
Basic system.........................................................................................................................................................4
Full system ...........................................................................................................................................................5
Roles of each component .....................................................................................................................................6
Supported audio files............................................................................................................................................6
PREPARATIONS ............................................................................................................................... 7
Connections..........................................................................................................................................................7
Downloading the dedicated applications ............................................................................................................. 8
Turning on this unit..............................................................................................................................................9
COMMUNICATION SETUP .......................................................................................................... 10
Media sharing setup ...........................................................................................................................................10
Media controller setup........................................................................................................................................10
CONTENT BROWSING AND PLAYBACK................................................................................. 12
Operations from PC browser..............................................................................................................................12
Operations from mobile device .........................................................................................................................13
Operations from main unit or remote control ....................................................................................................14
Presetting favorite contents ................................................................................................................................15
SETUP MENU................................................................................................................................... 17
Setup menu operations .......................................................................................................................................17
Setup menu list...................................................................................................................................................18
Advanced setup menu ........................................................................................................................................19
CONTROLS AND FUNCTIONS .................................................................................................... 20
Front panel .........................................................................................................................................................20
Remote control ...................................................................................................................................................21
ADDITIONAL INFORMATION .................................................................................................... 22
Basic information on this unit ............................................................................................................................22
Troubleshooting .................................................................................................................................................24
Front panel display messages.............................................................................................................................26
Taking care of this unit ......................................................................................................................................26
SPECIFICATIONS ........................................................................................................................... 27
About this manual
• This manual is produced prior to production. Design and specifications are subject to change in part as a result of
improvements, etc. In case of differences between the manual and product, the product has priority.
• Pictures and illustrations (screen display, etc.) used in this manual may be different from actual products
depending on use environments.
• Notes contain important information about safety and operating instructions. y indicates a tip for your operation.
Introduction
y
• If you are not familiar with “DLNA” or “Internet radio”, please read “Basic information on this unit” ( P.22) at the beginning.
• For details on compatible mobile devices, see “Mobile device” ( P.6).
1 En
English
Thank you for purchasing Yamaha Network Player NP-S2000. By connecting this unit to your home network and audio
system, you can enjoy Internet radio (vTuner) or music files stored on your music servers (PCs and NAS) in the same
network.
Also, you can select a playback source or operate this unit not only from the supplied remote control but also from an
external media controller such as PC browsers and mobile devices.
SUPPLIED ACCESSORIES
Check that you have received all of the following items.
• Remote control
• Batteries (AA, R6, UM-3) x 2
• Power cable
• RCA stereo cable
• TwonkyMedia server License Key brochure
■ Installing the batteries
1
3
2
■ Note on transport tape
Upon shipment from the factory, magnet feet are fixed
with transport tape to this unit’s feet. Remove the
transport tape before placing this unit.
1 Press the
SELECT
ENTER
SOURCE
LINK
RETURN
PUSH
part and slide the battery cover off.
2 Insert two supplied AA batteries according to the
polarity markings (+ and –).
OFF
3 Slide the cover back until it snaps into place.
Notes on remote controls and batteries
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following
conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or
stove
– places of extremely low temperatures
– dusty places
• Insert the battery according to the polarity markings
(+ and –).
• Change all batteries if the operation range of the remote
control narrows.
• If the batteries run out, immediately remove them from
the remote control to prevent an explosion or acid leak.
• If you find leaking batteries, discard the batteries
immediately, taking care not to touch the leaked
material. If the leaked material comes into contact with
your skin or gets into your eyes or mouth, rinse it away
immediately and consult a doctor. Clean the battery
compartment thoroughly before installing new batteries.
• Do not use old batteries together with new ones. This
may shorten the life of the new batteries or cause old
batteries to leak.
• Do not use different types of batteries (such as alkaline
and manganese batteries) together. Specification of
batteries may be different even though they look the
same.
• Before inserting new batteries, wipe the compartment
clean.
• Dispose of batteries according to your regional
regulations.
2 En
GENERAL FLOWCHART
The following flowchart explains general setup procedures required to enjoy streaming music or Internet radio using this
unit.
Step 1: Deciding the system structure
 P.4
Decide the system to establish and check the requirements.
Step 2: Connections
 P.7
Connect this unit to your PC system and audio system.
Step 3: Downloading the dedicated applications
 P.8
From the website, download the dedicated applications required for your system.
Step 4: Turning on this unit
 P.9
Power on this unit and other system components.
Step 5: Media sharing setup
 P.10
Configure the media sharing settings of your digital media server.
Step 6: Media controller setup
 P.10
Search the network players in your home network and establish a connection between an external media
controller (PC) and this unit.
Step 7: Playback
 P.12
Select music or Internet radio station to listen to.
English
3 En
SYSTEM STRUCTURES
This section describes two major system structure examples and what you can do with each system.
Basic system
The following figure shows a minimum configuration to utilize the basic functions of this unit.
With this system structure, you can do...
• Easily establishing a communication between your PC and this unit using the dedicated PC setup application.
• Selecting playback source from a browser on any PC in the same network or remote control
– Browsing music stored on your PC
– Selecting Internet radio stations
Your audio system
Your PC network system
Internet
Speakers
Amplifier
Broadband
router
PC
Balanced, digital audio
(optical or coaxial), or
analog stereo cable
Modem
Network cable
SELECT
ENTER
SOURCE
PUSH
RETURN
LINK
OFF
SHUFF
R
DIMME
T
REPEA
To AC outlet
Remote control
AY
DISPL
E
SOURC
This unit (NP-S2000)
LE
RY
MEMO
PRESE
T
SETUP
RETUR
N
NOW
G
PLAYIN
HOME
ENTER
AMP
ME
VOLU
MUTE
INPUT
■ Requirements
To establish the “basic system”, all of the following requirements should be met.
Audio system
Your amplifier has an audio input jack.
A speaker set is connected to your amplifier.
y
For details on a connection between your audio system and this unit, see “Connections” ( P.7). Please also refer to the manual of your
audio devices.
PC network system
Your PC is connected to the Internet via the broadband router.
Your PC has a disc drive capable of ripping CDs and enough hard drive space to store audio files.
y
• For details on Internet connection, please refer to the manual of your network devices.
• For details on a connection and communication setup between your PC and this unit, see “Connections” ( P.7) and
“COMMUNICATION SETUP” ( P.10).
4 En
SYSTEM STRUCTURES
Full system
The following figure shows a recommended configuration to take full advantage of the functions of this unit.
With this system structure, you can do...
• All features listed in “Basic system” ( P.4)
• Delivering music stored on your NAS (without starting your PC)
• Selecting playback source from your mobile device
– Browsing music stored on your PC and NAS
– Selecting Internet radio stations
Your PC network system
PC
Internet
Your audio system
Modem
Speakers
WiFi
broadband
router
Amplifier
NAS
Balanced, digital audio
(optical or coaxial), or
analog stereo cable
Network cable
SELECT
ENTER
SOURCE
PUSH
RETURN
LINK
Mobile
device
OFF
AY
DISPL
E
SOURC
SHUFF
R
DIMME
T
REPEA
To AC outlet
This unit (NP-S2000)
MEMO
LE
RY
PRESE
T
SETUP
RETUR
N
NOW
G
PLAYIN
HOME
ENTER
Remote control
AMP
ME
VOLU
MUTE
INPUT
■ Requirements
To establish the “full system”, all of the following requirements should be met.
Audio system
Your amplifier has an audio input jack.
A speaker set is connected to your amplifier.
y
For details on a connection between your audio system and this unit, see “Connections” ( P.7). Please also refer to the manual of your
audio devices.
PC network system
Your PC is connected to the Internet via the WiFi broadband router.
Your PC has a disc drive capable of ripping CDs and enough hard drive space to store audio files.
Your NAS is compatible with DLNA and works with your PC and WiFi broadband router properly.
y
• For details on Internet connection, please refer to the manual of your network devices.
• For details on a connection and communication setup between your PC and this unit, see “Connections” ( P.7) and
“COMMUNICATION SETUP” ( P.10).
English
Mobile device
Your mobile device ( P.6) is wirelessly connected to the WiFi broadband router.
5 En
SYSTEM STRUCTURES
Roles of each component
Supported audio files
This section describes rolls of each component in the
system.
This unit supports the following audio files stored on a PC
or a NAS.
This unit (NP-S2000)
Decodes digital audio signals received from your PC
network system and sends the signals to your audio
system so that you can enjoy digital music stored on a PC
or NAS, or Internet radio in high-quality sounds.
Audio format:
WAV, FLAC, MP3, AAC, WMA
Remote control
With the remote control, you can select a playback source
or operate this unit while viewing information on the front
panel display of this unit.
Amplifier and speakers
Receive audio signals from this unit and produce sounds.
PC
• Stores music files ripped from CDs or downloaded and
works as a DLNA digital media server.
• By installing the dedicated PC setup application on your
PC, you can configure the communication setup
between your PC and this unit.
• With a browser (Internet Explorer 6.0 or later), you can
select a playback source or operate this unit.
Broadband router (WiFi broadband router)
Connects your PC and this unit to the Internet. A WiFi
broadband router also works as a bridge between your
mobile device and this unit in the network.
NAS (Network attached storage)
Stores music files ripped from CDs or downloaded and
works as a DLNA digital media server, enabling you to
enjoy music without starting your PC.
Mobile device
By installing the dedicated application on your mobile
device, you can use it as an external controller. You can
select playback source or operate this unit while viewing
the screen of the mobile device.
Compatible mobile devices (as of June 2011)
– iPhone, iPod touch, iPad
(iOS 4.0 or later)
– Android™ devices
(Android OS 2.1 or later, ready for WiFi connection)
Note
You may not be able to use the dedicated application depending
on the operating system version of the mobile device
6 En
y
• Playable audio formats vary depending on the media server.
For example:
– Windows Media Player 12 supports WAV, MP3, AAC and
WMA.
– Windows Media Player 11 supports WAV, MP3 and WMA.
– TwonkyMedia server (supplied) supports all audio formats
listed above.
For details, visit “http://download.yamaha.com/file/45350”.
• We recommend WAV and FLAC as audio formats producing
high-quality sounds.
Sample rate:
96, 88.2, 64, 48, 44.1, 32, 24, 22.05, 16, 12, 11.025, 8
(kHz)
Bit depth:
16, 24 (bit)
PREPARATIONS
This section describes preparations required before operating this unit.
Connections
Depending on the system structure you want to establish, make cable connections of the system components.
Speakers
Amplifier
PC
Internet
XLR balanced
cable
WAN
Coaxial digital
audio cable
Optical cable
RCA
stereo cable
(supplied)
Modem
LAN
Broadband
router
1
NAS
(for full system only)
2
OUTPUT
NETWORK
R BALANCED OUT
R ANALOG OUT L
BALANCED OUT L
OPTICAL
COAXIAL
SYSTEM CONNECTOR
AC IN
DIGITAL OUT
This unit (NP-S2000)
* Used for product inspection service
3
Power cable (supplied)
To AC outlet
1 Connect this unit to your amplifier with an XLR
balanced cable, RCA stereo cable, coaxial digital
audio cable or optical cable.
y
Select one of the audio connections shown above. If your
amplifier is equipped with XLR balanced input jacks, we
recommend a balanced connection for optimum audio
performance.
■ About the spike feet
The feet of this unit include built-in spikes that can reduce
the effect of vibrations on the set. To use the spikes,
remove the magnet foot by pulling it. Also, you can adjust
the height of each foot by rotating it if this unit is unstable.
2 Connect this unit to your broadband router with an
STP (shielded twisted pair) network cable (CAT-5 or
higher straight cable).
Spike
3 Connect the power cable to AC IN and then plug
into an AC outlet.
Magnet foot
When using a digital connection, audio output may be
interrupted at the beginning of a track depending on the
audio system (amplifier, etc).
The spikes may scratch the shelf or floor. We recommend you use
a support when placing this unit on expensive furniture, etc.
7 En
English
Caution
Note
PREPARATIONS
■ About the BALANCED OUT jacks
The pin assignments for the BALANCED OUT jacks of
this unit are shown below. Before connecting an XLR
balanced cable, refer to the manual of your amplifier and
verify that its XLR balanced input jacks are compatible
with the pin assignments.
Downloading the dedicated
applications
Visit the following website for information about
downloading the dedicated applications.
http://download.yamaha.com/file/45350
y
1: ground
2: hot
The latest information on this unit (owner’s manual, FAQ, etc.) is
also available in the download file.
■ Network Player Search
3: cold
When connecting to this unit, be sure to match the pins
and insert the connector of the “female” XLR balanced
cable until you hear a click. When disconnecting, hold
down the lever of the connector and then pull it out.
“Female” XLR connector
This application enables you to easily search the network
players in your home network from your PC and start the
browser to select playback source or operate this unit.
Note
Please read “License agreement” ( P.28) before using this
application.
■ Network Player Controller Full System
An application for mobile devices ( P.6). This
application enables you to select playback source or
operate this unit from your mobile device.
■ TwonkyMedia server
“Male” XLR connector
8 En
For details, refer to “TwonkyMedia server License Key
brochure” supplied with this unit.
PREPARATIONS
Turning on this unit
If you have established all cable connections, turn on this unit and other system components.
SELECT
ENTER
SOURCE
PUSH
RETURN
LINK
OFF
Set the power switch to STANDBY/ON
y
When the power switch on main unit is set to STANDBY/ON, you can switch this unit between on and standby by pressing the power
button on the remote control ( P.21).
English
9 En
COMMUNICATION SETUP
This section describes the setup required on digital media
servers (PC or NAS) and controllers (PC).
3
Check the “Share my media to” box,
select the “NP-S2000” icon and then
click “Allow”.
4
In the same way, select the icons for
devices to be used as external media
controllers (other PCs and mobile
devices) and then click “Allow”.
5
Click “OK” to exit.
Media sharing setup
To enable a sharing of PC/NAS music contents over the
network, configure the sharing setting of the media server.
■ Sharing setup on PC
When using Windows Media Player 12
(on Windows 7)
1
In “Control Panel”, select “Choose
homegroup and sharing options”
under “Network and Internet”.
2
Check the “Stream my pictures,
music, and videos to all devices on
my home network” box and then
select “Choose media streaming
options”.
3
Select “Allowed” from the dropdown menu next to “NP-S2000”.
4
5
In the same way, select “Allowed”
from the drop-down menu next to
“Media programs on this PC and
remote connections”.
Click “OK” to exit.
y
Since this unit supports Windows 7, you can directly control
playback of this unit from Windows Media Player 12.
When using TwonkyMedia server
If you have saved music files on your PC with iTunes
(Non-DRM AAC/MP3 files), you can enable music
streaming by using TwonkyMedia server. For details,
refer to “TwonkyMedia server License Key brochure”
supplied with this unit.
Change the media receiver setting on TwonkyMedia
server to allow this unit and devices to be used as external
media controllers (other PCs and mobile devices) to
access TwonkyMedia server.
■ Sharing setup on NAS Full System
Refer to the manual of your NAS and change the media
sharing setting on the NAS to allow this unit and devices
to be used as external media controllers (other PCs and
mobile devices) to access the NAS.
Media controller setup
To select a playback source or operate this unit from
external media controllers, first you need specify the IP
address of this unit on a browser (Internet Explorer 6.0 or
later). By using the dedicated application “Network Player
Search”, you can easily search the network players in your
home network from your PC and establish a connection.
y
When using Windows Media Player 11
1
Start Windows Media Player 11 on
your PC.
2
Select “Library” and then “Media
Sharing”.
10 En
• For details on the download of the dedicated applications, see
“Downloading the dedicated applications” ( P.8).
• To use your mobile devices as an external media controller, see
“Operations from mobile device” ( P.13).
COMMUNICATION SETUP
■ Controller setup on PC
3
In this section, Windows 7 is used as an example.
1
Click “Search” to search the network
players in the network.
Click the “NP Search.exe” in the
download folder to start “Network
Player Search”.
The “NETWORK PLAYER SEARCH” screen
appears.
Click
4
Select the model from the list and
then click “Connect”.
y
The menu language is automatically selected according to the
language setting on the operating system. When using Windows,
you can also select a language from “Language” under the “Tool”
menu.
Select
2
From the “Network Adapter” dropdown menu, select the network
adapter connected to the network
which this unit is being connected.
Click
The network player control screen appears in the
browser.
Now you are ready to select a playback source or
operate this unit. For details, see “CONTENT
BROWSING AND PLAYBACK” ( P.12).
Select
y
By adding the URL of the network player control screen (IP
address of this unit) to the bookmark of the browser, you will be
able to open it without using “Network Player Search” from the
next time. However, the IP address of this unit may change if you
are using a DHCP server.
English
11 En
CONTENT BROWSING AND PLAYBACK
This section describes how to browse contents and start
playback from the PC browser (Internet Explorer 6.0 or
later), mobile device or front panel/remote control of this
unit.
2
Select a menu item until you find a
desired content and then start
playback.
Operations from PC browser
Menu screen
1
In the “Source” screen, select a
source type.
1
2
y
• The “Source” screen is displayed after following the procedure
in “Controller setup on PC” ( P.11).
• Select “Setup” to configure the settings of this unit ( P.17).
3
4
5
6
1 Return
Move to the previous menu screen.
2 Now Playing
Move to the playback information screen.
3 Menu items
4 Source
Move to the “Source” screen.
5 Home
Move to the top menu screen.
6 Page Up/Page Down
Switch the pages of the menu list.
12 En
CONTENT BROWSING AND PLAYBACK
Playback information screen
Operations from mobile device
1
Full System
By using the dedicated application “Network Player
Controller” ( P.8), you can browse contents and start
playback from your mobile device.
2
1
Tap the “NP Controller” icon on your
mobile device to start “Network
Player Controller”.
2
In the “Player Select” screen, select
a network player to connect to.
3
4
5
6
7
8
1 Return
Move to the previous screen.
2 Album art or station icon (if available)
3 Playback information
Shows the information on the playback content.
4 Playback functions
(skip backward),
DLNA:  (play), (pause),
(skip forward)
Internet Radio:  (play),
(stop)
5 Source
Move to the “Source” screen.
6 Home
Move to the top menu screen.
7 Shuffle (for “DLNA” only)
Switch the shuffle mode (on, off).
8 Repeat (for “DLNA” only)
Switch the repeat mode (repeat all, repeat single, off).
y
You can register your favorite Internet Radio stations by
accessing the “vTuner Radio Guide” website with a PC browser.
To use this feature, you need the MAC address of this unit
( P.18) and your e-mail address to create your personal
account. For details, visit “http://yradio.vtuner.com/”.
y
• This screen is skipped when only one network player has been
detected.
• To search the network players again, tap “Search”.
3
Follow the procedure in “Operations
from PC browser” ( P.12).
y
13 En
English
• To update the media server list, tap “Search”.
• To reload the content list of the selected media server, tap
“Load”. Reload the content list when you have added or deleted
any content on the media server.
CONTENT BROWSING AND PLAYBACK
Remote control
Operations from main unit or
remote control
RETURN
NOW PLAYING
HOME
RETURN
HOME
NOW PLAYING
y
For details on the controls on the front panel/remote control, see
“CONTROLS AND FUNCTIONS” ( P.20).
1
Cursor buttons/
ENTER
Press SOURCE repeatedly to select
a source type.
SOURCE
ENTER
Cursor buttons/ ENTER
Press / to select a menu item (or press /
repeatedly to select from the gauge) and press
ENTER to confirm the selection.
RETURN
SOURCE
Show the upper-level menu in the front panel display.
SELECT
ENTER
SOURCE
HOME
PUSH
DIMMER
DISPLAY
REPEAT
SHUFFLE
RETURN
Show the top-level menu in the front panel display.
NOW PLAYING
Show the playback information in the front panel
display.
MEMORY
SOURCE
3
D L N A
If playback starts, use the following
controls to operate desired
functions.
Symphony # 9 - 4
Internet Radio
Main unit
2
Use the following controls to select a
menu item until you find a desired
content.
SELECT
ENTER
SOURCE
Sym phony # 9 - 4
RETURN Jog dial
Jog dial
Main unit
Rotate left to skip backward and right to skip
forward. Press to start or pause playback.
SELECT
ENTER
SOURCE
PUSH
RETURN
RETURN Jog dial
Jog dial
Rotate to select a menu item and press to confirm the
selection.
RETURN
Show the upper-level menu in the front panel display.
14 En
PUSH
RETURN
RETURN
Show the previous menu in the front panel display.
CONTENT BROWSING AND PLAYBACK
Remote control
REPEAT
Presetting favorite contents
DIMMER
DISPLAY
REPEAT
SHUFFLE
RETURN
NOW PLAYING
DISPLAY
SHUFFLE
y
HOME
For details on the controls on the front panel/remote control, see
“CONTROLS AND FUNCTIONS” ( P.20).
RETURN
Playback
buttons
The preset function enables to make a quick access to your
favorite contents (up to 20 contents) with the remote
control.
■ Registering a favorite content as a preset
ENTER
You can preset music files or Internet radio stations.
Playback buttons
DLNA:
(play),
(pause),
backward),
(skip forward)
Internet Radio:
(play),
(stop)
(skip
SHUFFLE (for “DLNA” only)
1
Start playback of the content you
want to preset.
2
Press MEMORY to enter the preset
mode.
Switch the shuffle mode (on, off).
REPEAT (for “DLNA” only)
Switch the repeat mode (repeat all, repeat single, off).
MEMORY
MEMORY
DISPLAY
PRESET
Switch the playback information shown in the front
panel display.
PRESET
SETUP
RETURN
RETURN
NOW PLAYING
HOME
Show the previous menu in the front panel display.
y
You can register your favorite Internet Radio stations by
accessing the “vTuner Radio Guide” website with a PC browser.
To use this feature, you need the MAC address of this unit
( P.18) and your e-mail address to create your personal
account. For details, visit “http://yradio.vtuner.com/”.
Cursor buttons
ENTER
The empty preset number is automatically selected.
Memory: 2
3
2
4
6
8 9 10
To change the preset location, press
PRESET or / repeatedly.
To switch between “1 to 10” and “11 to 20”, press
/.
Memory:13
13 14151617
20
y
Preset locations already used are displayed without numbers. If
one of these locations is selected, it will be replaced with new
content.
4
Press MEMORY again to confirm the
selection.
English
15 En
CONTENT BROWSING AND PLAYBACK
■ Playing back a preset content
1
Press PRESET or / repeatedly to
select a desired preset number.
To switch between “1 to 10” and “11 to 20”, press
/.
Select: 3 1 2 3
5
7
y
Preset locations not in use are displayed without numbers.
2
Within five seconds, press
.
ENTER
y
To clear all preset settings, execute “Initialize” in the advanced
setup menu ( P.17). Make sure that this operation will reset all
the settings of this unit to factory default.
Notes
• This unit does not recall the preset content in the following
cases:
– the PC which stores the selected content is turned off or
disconnected from the network.
– the selected Internet radio station is temporary unavailable or
out of service.
– the directory of the selected content has been changed.
• This unit memorizes the relative position of the preset contents
in a directory. If you have added or deleted any music files to or
from the directory, this unit may not recall the preset content
correctly. In such cases, preset the contents again.
16 En
SETUP MENU
You can configure the various settings of this unit using
the setup menu.
y
For details on the controls on the front panel/remote control, see
“CONTROLS AND FUNCTIONS” ( P.20).
Setup menu operations
■ Operations from PC browser or mobile
device
1
■ Operations from remote control
1
In the “Source” screen, select
“Setup”.
Press SETUP to enter the setup
menu ( P.18).
To make the advanced setup menu
items ( P.19) selectable, press
SETUP while holding down RETURN
(on the main unit).
SETUP
SETUP
RETURN
NOW PLAYING
Cursor buttons/
ENTER
HOME
ENTER
SELECT
ENTER
SOURCE
PUSH
RETURN
Setup
RETURN
2
Select a menu item to configure.
NETWORK C o n f i g u r a t i o n
2
Press / to select a menu item to
configure and then press ENTER.
For some menu items, repeat step 2 to select a
submenu item.
Firmware Update
3
Press / to select a parameter and
then press ENTER.
y
You need to enter a numerical address for some menu items. In
this case, press / to move the target, / to select a number
and ENTER to confirm it.
Select a parameter to be set.
English
3
y
You need to enter text for some menu items. In this case, select
the entry field, use the keyboard to enter text and the Enter key to
confirm it.
17 En
SETUP MENU
Setup menu list
Available setup menus vary depending on the controller.
Menu
Submenu
DHCP
NETWORK
Configuration
NETWORK
Information
Settings
(Bold:
default)
On, Off
Controller
Function
Mobile
device
Remote
control
Select “On” to use the DHCP server to
automatically configure the network settings
of this unit or “Off” to configure manually.
IP Address
Specify the IP address when “DHCP” is
“Off”. *1
Subnet Mask
Specify the subnet mask when “DHCP” is
“Off”. *1
Default
Gateway
Specify the default gateway when “DHCP” is
“Off”. *1
DNS Server
(P)
Specify the primary DNS server when
“DHCP” is “Off”. *1
DNS Server
(S)
Specify the secondary DNS server when
“DHCP” is “Off”. *1
MAC
Address
The MAC address of this unit is shown. The
MAC address is also used as a vTuner ID.
Status
The network status of this unit is shown.
System
The serial number of this unit is shown.


MAC Address Filter
Specify the MAC addresses (up to 5) of the
network components that will be permitted
access to this unit when “MAC Address Filter
On/Off” is “On”.

Firmware Version
(NP-S2000 Information)
The firmware version of this unit is shown.



Update the firmware of this unit.
Firmware Update
Friendly Name
– If “Firmware Update?” appears, press ENTER to
start firmware update. Do not operate this unit
until “Update OK” appears.
– If the firmware is already the latest, “Update OK”
appears.
Specify the friendly name of this unit for
Windows 7.


*1: When “DHCP” is “On”, you can check the values (IP address, etc.) assigned by the DHCP server.
18 En
SETUP MENU
Advanced setup menu
The following menu items are available only when you enter the setup menu by pressing SETUP (on the remote control)
while holding down RETURN (on the main unit).
Menu
MAC Address Filter On/Off
Settings
(Bold:
default)
On, Off
Function
Select “On” to permit access to this unit only from the network
components with the MAC addresses specified in the “MAC Address
Filter” list. Select “Off” to disable the MAC address filter function.
Select “On” to skip silence between each track and enable seamless
playback. Select “Off” to disable the gapless playback function. This
function works on “DLNA” content only.
Gapless Playback
vTuner Account Reset
On, Off
Yes, No
y
When “Gapless Playback” is “On”, this unit starts to read data of the
next track at the end of the current track. Some playback operations
(skip, repeat, etc.) will work on the next track during this process.
Select “Yes” to reset the vTuner account. If “Please Power Off!”
appears, turn off this unit. The reset operation will be reflected the next
time you turn on this unit.
y
To create a new account, access “http://yradio.vtuner.com/”. You need the
MAC address of this unit and your e-mail address.
Initialize
Yes, No
Select “Yes” to reset the settings of this unit to factory default. If
“Please Power Off!” appears, turn off this unit. The reset operation will
be reflected the next time you turn on this unit.
English
19 En
CONTROLS AND FUNCTIONS
Front panel
1
SELECT
ENTER
SOURCE
RETURN
7
8
PUSH
LINK
OFF
2
3
4
5
1 Power indicator
Lights up: This unit is turned on.
Lights up dimly: This unit is standby.
Off: This unit is turned off.
2 Power switch ( P.9)
Switches this unit between on/standby and off.
3 Foot ( P.7)
Remove the magnet foot to use the spikes. Also, you can
adjust the height of each foot by rotating it.
4 Remote control sensor ( P.21)
Receives infrared signals from the remote control.
5 LINK indicator
Lights up: This unit is connected to the network and an IP
address has been assigned.
Blinks: This unit is connected to the network but an IP
address has not been assigned.
Off: This unit is not connected to the network.
20 En
6
3
9
6 Front panel display
Shows menu items or playback information.
y
For details on display messages, see “Front panel display
messages” ( P.26).
7 SOURCE ( P.14)
Selects a source type.
8 RETURN ( P.14)
Shows the upper-level menu in the front panel display.
9 Jog dial ( P.14)
Rotate to select an item and press to confirm the selection.
CONTROLS AND FUNCTIONS
Remote control
1 Remote control signal transmitter
Transmits infrared signals.
1
2
3
4
DIMMER
DISPLAY
REPEAT
SHUFFLE
3 DIMMER
Adjusts the brightness of the front panel display.
4 REPEAT ( P.15)
Switches the repeat mode (repeat all, repeat single, off).
A
B
5 MEMORY ( P.15)
Turns this unit to the preset mode.
MEMORY
6
6 PRESET ( P.15)
Selects a preset number.
PRESET
7 SETUP ( P.17)
Shows the setup menu in the front panel display.
SETUP
7
9
0
SOURCE
5
8
2 SOURCE ( P.14)
Selects a source type.
RETURN
NOW PLAYING
HOME
C
D
8 RETURN ( P.14)
Shows the upper-level menu in the front panel display.
9 Cursor buttons/ENTER ( P.14 and 17)
Use the cursor buttons to select an item and ENTER to
confirm the selection, or control the playback functions.
ENTER
0
AMP
A DISPLAY ( P.15)
Switch the playback information shown in the front panel
display.
VOLUME
MUTE
(power) ( P.9)
Switches this unit between on and standby.
E
B SHUFFLE ( P.15)
Switches the shuffle mode (on, off).
C HOME ( P.14)
Shows the top-level menu in the front panel display.
INPUT
D NOW PLAYING ( P.14)
Shows the playback information in the front panel display.
E Amplifier control buttons
Control the corresponding functions of Yamaha amplifier.
For details, refer to the manual of your amplifier.
y
These buttons may not work on some Yamaha amplifiers.
■ Using the remote control
Aim the remote control directly at the remote control sensor on this unit during operation.
Remote control sensor
LINK
OFF
30
30
Within 6 m (20 ft)
SOURCE
DIMMER
DISPLAY
REPEAT
SHUFFLE
MEMORY
PRESET
SETUP
NOW PLAYING
English
RETURN
HOME
ENTER
AMP
VOLUME
MUTE
INPUT
21 En
ADDITIONAL INFORMATION
Basic information on this unit
■ General
■ DLNA
What is “Yamaha Network Player NP-S2000”?
NP-S2000 can play back the following audio sources:
• DLNA-compatible server (music files stored on a PC or
a NAS)
For details, see “DLNA” below.
• Internet radio (vTuner)
For details, see “Internet radio” ( P.23).
Also, you can select a playback source or operate this unit
from the remote control or an external media controller
(PC browser or dedicated mobile device application).
What is “DLNA”?
It stands for Digital Living Network Alliance, and is a
guideline to promote standardization of interconnection of
home network devices such as digital consumer
electronics.
DLNA components are separated into four types: Digital
Media Server (DMS), Digital Media Renderer (DMR),
Digital Media Player (DMP) and Digital Media Controller
(DMC).
“DMS” is a device that is used to store or distribute digital
contents such as music files. For this unit, PCs and NAS
are regarded as “DMS”. “DMR” is a device to receive
instructions from “DMC” and play back digital contents
such as this unit. Similarly, “DMP” is a device to play
back digital contents. “DMC” is a device to control digital
contents. PC browsers and the mobile device application
correspond to “DMC” for this unit.
Tell me about the network feature
By connecting this unit to your home network with an
STP (shielded twisted pair) network cable (CAT-5 or
higher straight cable), you can enjoy Internet radio or
music files stored in the specified folder (directory) on the
server in the same network. For information about the
network devices and settings required to establish a home
network, please consult your Internet service provider.
Can I preset favorite contents?
Yes you can. This unit has the preset function that enables
you to make a quick access to your favorite contents (up to
20 contents) with the remote control. For details, see
“Presetting favorite contents” ( P.15).
You can also register your favorite Internet Radio stations
by accessing the “vTuner Radio Guide” website with a PC
browser. To use this feature, you need the MAC address
of this unit ( P.18) and your e-mail address to create
your personal account. For details, access “http://
yradio.vtuner.com/”.
Does this unit support multi-language display?
Yes, it does. The front panel display of this unit can
display English, French, German, Spanish, Russian and
Japanese used in track names, etc.
What types of servers can I use to browse or play
back music files with DLNA?
Use a DLNA-compatible server, such as one of the
following devices.
PC compatible with Windows Media Player 12 or
Windows Media Player 11
To browse folders (directories) on your PC from this
unit, you need to change the media sharing setting of
Windows Media Player 12 or Windows Media Player
11 to make those folders accessible from this unit. For
details on Windows Media Player, please ask Microsoft
Corporation.
PC with TwonkyMedia server installed
With a license key shown on the front cover of the
“TwonkyMedia server License Key” brochure, you can
download TwonkyMedia server for free.
It enables playback of FLAC files or music in the
iTunes library on this unit.
How many servers can I connect to the network?
You can connect up to 16 servers.
22 En
ADDITIONAL INFORMATION
What types of audio formats can I play back on
this unit?
This unit supports monaural or stereo sounds of WAV,
FLAC, MP3, AAC and WMA files.
For example, the following audio formats are not
supported.
• Audio files with DRM (Digital Rights Management)
such as music you purchased on iTunes Store
• ATRAC, multi-channel sounds of WAV and WMA
files
Can I play back music in the iTunes library on
this unit?
You can play back MP3, AAC and WMA files by
installing TwonkyMedia server on your PC or using a
NAS that supports playback of the iTunes library.
■ Internet radio
Tell me about the Internet radio
If this unit is connected to the Internet via your home
network, you can listen to Internet radio stations using the
vTuner Internet Radio station database service, providing
a database of over 2000 radio stations around the world.
To enjoy Internet radio in a good condition, we
recommend that you use a fast broadband connection to
the Internet. For information about the broadband
connection speed, please consult your Internet service
provider.
Can I add other Internet radio stations to the list?
If you have found an Internet radio station that is not in the
list, you can add it by accessing the “vTuner Radio Guide”
website with a PC browser. To use this feature, you need
the MAC address of this unit ( P.18) and your e-mail
address to create your personal account. For details,
access “http://yradio.vtuner.com/”.
Can I delete Internet radio stations that I do not
listen to from the list?
No, you cannot delete Internet radio stations from the list.
English
23 En
ADDITIONAL INFORMATION
Troubleshooting
Refer to the tables below if the unit does not function properly. If the problem you are experiencing is not listed below, or
if the instruction below does not help, download the FAQ file from “http://download.yamaha.com/file/45350” and check
it. Still, if you cannot find information you are looking for, contact the nearest authorized Yamaha dealer or service
center.
■ General
Problem
Cause
Remedy
See page
The power cable is not
connected to AC IN on the main
unit or not plugged into an AC
outlet.
Connect the power cable firmly.
7
This unit has been exposed to a
strong external electric shock
(such as lightning or strong
static electricity).
Turn off this unit, disconnect
the power cable, plug it back in
after 30 seconds and then use it
normally.
—
The power indicator on the front
panel flashes.
There is a problem with the
internal circuitries of this unit.
Turn off this unit, disconnect
the power cable, and then
contact the nearest authorized
Yamaha dealer or service
center.
—
Connect the audio cable firmly.
If the problem persists, the
audio cable may be defective.
7
No sound.
The audio cable connection
between this unit and amplifier
is improper.
The input setting on the
amplifier is incorrect.
Select the correct input (from
this unit) on the amplifier.
—
The audio cable connection
between this unit and amplifier
is improper.
Connect the audio cable firmly.
If the problem persists, the
audio cable may be defective.
7
Wrong distance or angle.
The remote control functions
within a maximum range of 6 m
(20 ft) and no more than 30
degrees off-axis from the front
panel.
21
Direct sunlight or lighting (from
an inverter type of fluorescent
lamp, etc.) is striking the remote
control sensor of this unit.
Adjust the lighting angle, or
reposition this unit.
—
The batteries are weak.
Replace all batteries.
2
The digital media server that
stores your preset content is
turned off.
Turn on the digital media server
and try again.
—
The preset Internet Radio
station is no longer in service.
Preset another favorite content.
15
Your amplifier is not one of
Yamaha amplifiers. (These
buttons may not work on some
Yamaha amplifiers.)
Use the remote control of your
amplifier.
—
This unit fails to turn on.
Hum noise is heard.
The remote control does not
work or function properly.
PRESET on the remote control
does not work.
The amplifier control buttons on
the remote control do not work
on the amplifier.
24 En
ADDITIONAL INFORMATION
■ DLNA
Problem
This unit does not detect the
digital media server (PC).
Some audio files cannot be
played back on this unit.
Cause
Remedy
See page
No server application is
installed on the PC.
Install a DLNA-compatible
server application such as
Windows Media Player 11,
Windows Media Player 12 or
TwonkyMedia server.
—
Windows Media Player 11 or
Windows Media Player 12 is
not started on the PC.
Start Windows Media Player 11
or Windows Media Player 12 on
the PC.
—
The sharing setting of Windows
Media Player 11 or Windows
Media Player 12 is incorrect.
Change the media sharing
setting of it to allow this unit to
access the PC folder.
10
Access to the PC is blocked by
the Antivirus software installed
on the PC.
Check the Antivirus software
settings (firewall setting, etc.).
—
You are trying to play back
DRM audio files you purchased
on iTunes Store.
You cannot play back DRM
audio files you purchased on
iTunes Store.
—
You are trying to play back
FLAC files stored on a PC
without TwonkyMedia server.
Install TwonkyMedia server on
the PC, or use a NAS that
supports playback of FLAC files.
—
Remedy
See page
—
—
■ Internet radio
Problem
Cause
Some Internet radio stations
cannot be played back.
The selected Internet radio
station is currently not
available.
It may not be available to listen
because there might be a
network problem, or the station
might be broadcasting in limited
hour. Also, the list may include
the station that is already
obsolete, because it takes time
to update the list. Please try
another station available.
There is a station with no sound
even after playback starts.
The selected Internet radio
station broadcasts audio silence
currently.
Some Internet radio stations
broadcast audio silence during
particular periods of time in a
day. Try the station later or
select another station.
English
25 En
ADDITIONAL INFORMATION
Problem
The sound from the Internet
radio breaks sometimes.
Cause
Remedy
See page
Intermittent audio occurs
depending on the network
condition between your local
network and the Internet station.
Try the station later or select
another station.
If the problem happens with any
stations, your network itself may
have a problem. To enjoy
Internet radio in a good
condition, we recommend that
you use a fast broadband
connection to the Internet. For
information about the broadband
connection speed, please consult
your Internet service provider.
—
Front panel display messages
Message
Status
<Access Denied>
Access to the media server has been denied.
<Access Error>
This unit cannot connect to the media server.
List Update
The content list of the media server has been updated.
<No Content>
This unit cannot find any content.
<No DLNA Server Found>
This unit cannot find any DLNA server.
<No Link>
This unit is not connected to the network.
<No Preset Memory>
No preset contents are registered.
<Not Available>
The operation you have performed is not available.
Please Wait
The specified file is being loaded.
<Preset Memory Error>
The content cannot be preset.
Preset No.XX is not Found.
The music file or Internet radio station registered to the selected preset
number (XX) cannot be found.
<Unable to Play>
This unit cannot play back the specified file.
Taking care of this unit
When you wipe this unit, do not use chemical solvents (alcohol, thinner, etc.). This may damage the finish. Use a clean,
dry cloth. For heavy dirt, dampen a soft cloth in detergent diluted with the water, wring it out, and then clean this unit up
with the cloth.
■ For the polish-finished side panels
Clean the side panels with a soft, dry cloth, such as a Yamaha Unicon cloth. For heavy dirt, use a Yamaha Piano Unicon.
Be careful not to bump the side panels with metal, porcelain, or other hard objects, as this may damage the finish.
26 En
SPECIFICATIONS
INPUT/OUTPUT
• NETWORK
Ethernet connection .................................100Base-TX/10Base-T
DLNA version ................................. 1.5 (DMP/DMR supported)
Audio format (DLNA)........... WAV, FLAC, MP3, AAC, WMA
Audio format (Internet radio) ...................................MP3, WMA
Audio sample rate (DLNA)
..... 96, 88.2, 64, 48, 44.1, 32, 24, 22.05, 16, 12, 11.025, 8 kHz
Bit depth (DLNA)......................................................... 16, 24 bit
• BALANCED OUT .......................................................... 2ch (L/R)
• ANALOG OUT ............................................................... 2ch (L/R)
• DIGITAL OUT
Optical   1
Coaxial  1
• SYSTEM CONNECTOR (for product inspection service)  1
AUDIO SECTION
• Output level
1 kHz, 0 dB, fs 44.1 kHz ............................................2.0 ± 0.3 V
• Signal to noise ratio (IHF-A network)
1 kHz, 0 dB, fs 44.1 kHz .................................... 116 dB or more
• Dynamic range
1 kHz, 0 dB, fs 44.1 kHz .................................... 100 dB or more
• Harmonic distortion
1 kHz, 0 dB, fs 44.1 kHz ...................................... 0.002% or less
• Frequency response
fs 44.1 kHz................................................2 Hz to 20 kHz, –3 dB
fs 48 kHz...................................................2 Hz to 24 kHz, –3 dB
fs 96 kHz...................................................2 Hz to 48 kHz, –3 dB
iPod touch, iPhone, iPad
Macintosh, Mac OS, iPod touch and iTunes are
trademarks of Apple Inc., registered in the U.S. and
other countries. iPhone and iPad are trademarks of
Apple Inc.
Android™ is a trademark of Google Inc.
Microsoft, Windows, Windows 7, Windows Vista,
Windows XP, Windows Media Audio, Windows
Media Player and Internet Explorer are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
TwonkyMedia is a registered trademark of
PacketVideo Corporation.
MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.
GENERAL
• Power supply
[U.S.A. and Canada models] ........... AC 110 to 120 V, 50/60 Hz
[Other models] ................................. AC 220 to 240 V, 50/60 Hz
• Power consumption ................................................................30 W
• Standby power consumption (reference data) .......................0.3 W
• Dimensions (W  H  D)................................. 435  69  440 mm
()
• Weight...................................................................... 12 kg (26.5 lb)
* Please note that all specifications are subject to change without
notice.
English
27 En
■ License agreement
ATTENTION
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”)
CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY
PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND
CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU
(AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAHA CORPORATION
(“YAMAHA”).
BY DOWNLOADING, INSTALLING, COPYING, OR OTHERWISE USING THIS
SOFTWARE YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS
LICENSE. IF YOU DO NOT AGREE WITH THE TERMS, DO NOT DOWNLOAD,
INSTALL, COPY, OR OTHERWISE USE THIS SOFTWARE. IF YOU HAVE
DOWNLOADED OR INSTALLED THE SOFTWARE AND DO NOT AGREE TO
THE TERMS, PROMPTLY DELETE THE SOFTWARE.
GRANT OF LICENSE AND COPYRIGHT
Yamaha hereby grants you the right to use one copy of the software program(s) and
data (“SOFTWARE”) accompanying this Agreement. The term SOFTWARE shall
encompass any updates to the accompanying software and data. The SOFTWARE is
owned by Yamaha and/or Yamaha’s licensor(s), and is protected by relevant copyright
laws and all applicable treaty provisions. While you are entitled to claim ownership of
the data created with the use of SOFTWARE, the SOFTWARE will continue to be
protected under relevant copyrights.
• You may use the SOFTWARE on a single computer.
• You may make one copy of the SOFTWARE in machine-readable form for backup
purposes only, if the SOFTWARE is on media where such backup copy is permitted.
On the backup copy, you must reproduce Yamaha’s copyright notice and any other
proprietary legends that were on the original copy of the SOFTWARE.
• You may permanently transfer to a third party all your rights in the SOFTWARE,
provided that you do not retain any copies and the recipient reads and agrees to the
terms of this Agreement.
RESTRICTIONS
• You may not engage in reverse engineering, disassembly, decompilation or otherwise
deriving a source code form of the SOFTWARE by any method whatsoever.
• You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in
whole or in part, or create derivative works of the SOFTWARE.
• You may not electronically transmit the SOFTWARE from one computer to another
or share the SOFTWARE in a network with other computers.
• You may not use the SOFTWARE to distribute illegal data or data that violates public
policy.
• You may not initiate services based on the use of the SOFTWARE without
permission by Yamaha Corporation.
Copyrighted data, including but not limited to MIDI data for songs, obtained by means
of the SOFTWARE, are subject to the following restrictions which you must observe.
• Data received by means of the SOFTWARE may not be used for any commercial
purposes without permission of the copyright owner.
• Data received by means of the SOFTWARE may not be duplicated, transferred, or
distributed, or played back or performed for listeners in public without permission of
the copyright owner.
• The encryption of data received by means of the SOFTWARE may not be removed
nor may the electronic watermark be modified without permission of the copyright
owner.
DISCLAIMER OF WARRANTY ON SOFTWARE
You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk.
The SOFTWARE and related documentation are provided “AS IS” and without
warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS
AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO
THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY
RIGHTS. SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING,
YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE
UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE
WILL BE CORRECTED.
LIMITATION OF LIABILITY
YAMAHA’S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE
OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL
YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY
DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS,
LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR
INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN
AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. In no event shall Yamaha’s total liability to you for all damages, losses
and causes of action (whether in contract, tort or otherwise) exceed the amount paid for
the SOFTWARE.
THIRD PARTY SOFTWARE
Third party software and data (“THIRD PARTY SOFTWARE”) may be attached to the
SOFTWARE. If, in the written materials or the electronic data accompanying the
Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE,
you acknowledge and agree that you must abide by the provisions of any Agreement
provided with the THIRD PARTY SOFTWARE and that the party providing the
THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or
arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way
for the THIRD PARTY SOFTWARE or your use thereof.
• Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. IN
ADDITION, YAMAHA EXPRESSLY DISCLAIMS ALL IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, as to the THIRD PARTY SOFTWARE.
• Yamaha shall not provide you with any service or maintenance as to the THIRD
PARTY SOFTWARE.
• Yamaha is not liable to you or any other person for any damages, including, without
limitation, any direct, indirect, incidental or consequential damages, expenses, lost
profits, lost data or other damages arising out of the use, misuse or inability to use the
THIRD PARTY SOFTWARE.
GENERAL
This Agreement shall be interpreted according to and governed by Japanese law
without reference to principles of conflict of laws. Any dispute or procedure shall be
heard before the Tokyo District Court in Japan. If for any reason a court of competent
jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of
this Agreement shall continue in full force and effect.
TERMINATION
COMPLETE AGREEMENT
This Agreement becomes effective on the day that you receive the SOFTWARE and
remains effective until terminated. If any copyright law or provisions of this Agreement
is violated, the Agreement shall terminate automatically and immediately without
notice from Yamaha. Upon such termination, you must immediately destroy the
licensed SOFTWARE, any accompanying written documents and all copies thereof.
This Agreement constitutes the entire agreement between the parties with respect to use
of the SOFTWARE and any accompanying written materials and supersedes all prior or
contemporaneous understandings or agreements, written or oral, regarding the subject
matter of this Agreement. No amendment or revision of this Agreement will be binding
unless in writing and signed by a fully authorized representative of Yamaha.
DOWNLOADED SOFTWARE
If you believe that the downloading process was faulty, you may contact Yamaha, and
Yamaha shall permit you to re-download the SOFTWARE, provided that you first
destroy any copies or partial copies of the SOFTWARE that you obtained through your
previous download attempt. This permission to re-download shall not limit in any
manner the disclaimer of warranty set forth in Section 5 below.
28 En
Limited Guarantee for European Economic Area (EEA) and Switzerland
Thank you for having chosen a Yamaha product. In the unlikely event that your Yamaha product needs guarantee service, please contact the dealer from
whom it was purchased. If you experience any difficulty, please contact Yamaha representative office in your country. You can find full details on our
website (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident).
The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha
undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha’s discretion, without any charge
for parts or labour. Yamaha reserves the right to replace a product with that of a similar kind and/or value and condition, where a model has been
discontinued or is considered uneconomic to repair.
Conditions
1. The original invoice or sales receipt (showing date of purchase, product code and dealer’s name) MUST accompany the defective product, along with a
statement detailing the fault. In the absence of this clear proof of purchase, Yamaha reserves the right to refuse to provide free of charge service and the
product may be returned at the customer’s expense.
2. The product MUST have been purchased from an AUTHORISED Yamaha dealer within the European Economic Area (EEA) or Switzerland.
3. The product must not have been the subject of any modifications or alterations, unless authorised in writing by Yamaha.
4. The following are excluded from this guarantee:
a. Periodic maintenance and repair or replacement of parts due to normal wear and tear.
b. Damage resulting from:
(1) Repairs performed by the customer himself or by an unauthorised third party.
(2) Inadequate packaging or mishandling, when the product is in transit from the customer. Please note that it is the customer’s responsibility to
ensure the product is adequately packaged when returning the product for repair.
(3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha’s instructions on the
proper use, maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in
force in the country where it is used.
(4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha’s control.
(5) Defects of the system into which this product is incorporated and/or incompatibility with third party products.
(6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or safety
standards of the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or Switzerland.
5. Where the guarantee differs between the country of purchase and the country of use of the product, the guarantee of the country of use shall apply.
6. Yamaha may not be held responsible for any losses or damages, whether direct, consequential or otherwise, save for the repair or replacement of the
product.
7. Please backup any custom settings or data, as Yamaha may not be held responsible for any alteration or loss to such settings or data.
8. This guarantee does not affect the consumer’s statutory rights under applicable national laws in force or the consumer’s rights against the dealer arising
from their sales/purchase contract.
Information for Users on Collection and Disposal of Old Equipment and
Used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC
and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your
local municipality, your waste disposal service or the point of sale where you purchased the items.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact
your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
English
29 En
■
■
■
■
■
■
■
■
Information about software
Information sur le logiciel
Information uber Software
Information om programvara
Informazioni sul software
Información sobre el software
Informatie over software
Информация о программном обеспечении
This product uses the following free software.
For information (copyright, etc) about each software, read the original sentences stated
below.
About zlib Library
Copyright notice:
©1995-2010 Jean-loup Gailly and Mark Adler
This software is provided ‘as-is’, without any express or implied warranty. In no event
will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including
commercial applications, and to alter it and?redistribute it freely, subject to the
following restrictions:
1. The origin of this software must not be misrepresented; you must not claim that you
wrote the original software. If you use this software in a product, an acknowledgment
in the product documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Jean-loup Gailly
Mark Adler
jloup@gzip.org
madler@alumni.caltech.edu
If you use the zlib library in a product, we would appreciate *not* receiving lengthy
legal documents to sign. The sources are provided for free but without warranty of any
kind. The library has been entirely written by Jean-loup Gailly and Mark Adler; it does
not include third-party code.
If you redistribute modified sources, we would appreciate that you include in the file
ChangeLog history information documenting your changes. Please read the FAQ for
more information on the distribution of modified source versions.
About FLAC codec Library
Copyright ©2000,2001,2002,2003,2004,2005,2006,2007, 2008,2009 Josh Coalson
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
– Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
– Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
– Neither the name of the Xiph.org Foundation nor the names of its contributors may
be used to endorse or promote products derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Notice for Windows Media DRM
This product is protected by certain intellectual property rights of Microsoft. Use
or distribution of such technology outside of this product is prohibited without a
license from Microsoft. Content owners use Windows Media digital rights
management technology (WMDRM) to protect their intellectual property,
including copyrights. This device uses WMDRM software to access WMDRM
protected content. If the WMDRM software fails to protect the content, content
owners may ask Microsoft to revoke the software’s ability to use WMDRM to
play or copy protected content. Revocation does not affect unprotected content.
When you download licenses for protected content, you agree that Microsoft may
include a revocation list with the licenses. Content owners may require you to
upgrade WMDRM to access their content. If you decline an upgrade, you will not
be able to access content that requires the upgrade.
30
JUTBG
NP-S2000
追加情報
日本語
Información adicional
Español
機能変更により、再生可能なフォーマットに Apple Lossless フォーマット
が追加されました。
ソフトウェアの著作権などについては裏面に示した原文をお読みください。
La función adicional de este producto admite formato de archivo de audio Apple
Lossless
Para obtener información detallada sobre la propiedad intelectual y la licencia,
consulte la otra cara de esta página.
Additional information
Informazioni addizionali
English
Italiano
The additional feature on this product supports Apple Lossless audio format.
For detailed information about the Copyright and License, please see the opposite
side of this page.
La funzione aggiuntiva del prodotto supporta il formato audio Apple Lossless.
Le informazioni dettagliate su copyright e licenza si trovano sul retro di questa
pagina.
Complément d’informations
Aanvullende informatie
Français
Nederlands
La fonction ajoutée à ce produit est compatible avec le format de fichier audio
Apple Lossless.
Pour plus de détails sur les droits d’auteur et la licence, voyez le verso de ce
document.
De aanvullende functie van dit product ondersteunt de Apple Losslessgeluidsbestandsindeling.
Raadpleeg de andere kant van deze pagina voor gedetailleerde informatie over de
copyright en licentie.
Zusätzliche Informationen
Дополнительная информация
Deutsch
Pусский
Das Gerät unterstützt jetzt außerdem den Audio-Codec Apple Lossless.
Detaillierte Urheberrechts- und Lizenzinformationen finden Sie auf der nächsten
Seite.
Дополнительная функция данного устройства поддерживает аудиоформат
Apple Lossless.
Для получения подробной информации об Авторских правах и Лицензиях
см. следующую страницу.
Ytterligare information
补充信息
Svenska
Extrafunktionen på denna produkt stödjer ljudfilsformatet Apple Lossless.
För detaljerad information om upphovsrätten och licensen, vänligen se andra
sidan av detta blad.
© 2012 Yamaha Corporation
中⽂
本产品上的附加功能可支持 Apple Lossless 音频文件格式。
如需关于版权和许可证的详细信息,请参看本页背面上的内容。
Printed in Malaysia ZD38610
Copyright
English
Copyright © 2011 Apple Inc. All rights reserved.
Licensed under the Apache License, Version 2.0 (the “License”);
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
or implied.
See the License for the specific language governing permissions and
limitations under the License.
Droits d’auteur
Français
Le texte authentique est en anglais. Cette traduction sert à titre de référence
seulement.
Droits d’auteur © 2011 Apple Inc. Tous droits réservés.
Sous licence Apache, Version 2.0 (la «Licence»);
Le fichier peut être utilisé uniquement selon les termes de la Licence.
Vous pouvez vous procurer une copie de la Licence sous
http://www.apache.org/licenses/LICENSE-2.0
Sauf dans le cas d’obligations légales ou d’accords écrits, le logiciel distribué
sous cette Licence est distribué «EN L’ÉTAT», SANS GARANTIE NI
CONDITION DE QUELQUE NATURE, explicite ou tacite.
Voyez la Licence pour les permissions et restrictions liées à la Licence dans votre
langue.
NP-S2000_OM_G_cv1_4.fm Page 1 Wednesday, June 22, 2011 5:03 PM
G
Network Player
Lecteur Réseau
© 2010 Yamaha Corporation
Printed in Malaysia WV33240-2
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRNUIKSAANWIJZIG
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ