EuroLite LED TMH-7 User manual

BEDIENUNGSANLEITUNG
USER MANUAL
MODE D'EMPLOI
MANUAL DEL USUARIO
TMH-155
Moving-Head
Für weiteren Gebrauch aufbewahren!
Keep this manual for future needs!
Gardez ce mode d’emploi pour des
utilisations ultérieures!
Guarde este manual para posteriores usos.
© Copyright
Nachdruck verboten!
Reproduction prohibited!
Réproduction interdit!
Prohibida toda reproducción.
MULTI-LANGUAGE-INSTRUCTIONS
Inhaltsverzeichnis
Table of contents
Sommaire
Contenido
EINFÜHRUNG................................................................................................................................................... 4
SICHERHEITSHINWEISE................................................................................................................................. 4
BESTIMMUNGSGEMÄßE VERWENDUNG..................................................................................................... 5
GERÄTEBESCHREIBUNG .............................................................................................................................. 6
Features ......................................................................................................................................................... 6
Geräteübersicht.............................................................................................................................................. 7
INSTALLATION ................................................................................................................................................ 8
Lampeninstallation/Lampenwechsel .............................................................................................................. 8
Lampenjustierung........................................................................................................................................... 9
Projektormontage........................................................................................................................................... 9
Anschluss an den DMX-512 Controller / Verbindung Projektor - Projektor ................................................. 12
Anschluss ans Netz...................................................................................................................................... 13
BEDIENUNG ................................................................................................................................................... 13
Adressierung des Projektors........................................................................................................................ 13
DMX-Protokoll .............................................................................................................................................. 14
Spezialfunktionen......................................................................................................................................... 15
REINIGUNG UND WARTUNG........................................................................................................................ 15
Sicherungswechsel ...................................................................................................................................... 16
TECHNISCHE DATEN .................................................................................................................................... 17
INTRODUCTION ............................................................................................................................................. 18
SAFETY INSTRUCTIONS .............................................................................................................................. 18
OPERATING DETERMINATIONS.................................................................................................................. 19
DESCRIPTION OF THE DEVICE ................................................................................................................... 20
Features ....................................................................................................................................................... 20
Overview ...................................................................................................................................................... 21
INSTALLATION .............................................................................................................................................. 22
Installing/Replacing the lamp ....................................................................................................................... 22
Lamp adjustment.......................................................................................................................................... 23
Rigging ......................................................................................................................................................... 23
DMX-512 connection / connection between fixtures.................................................................................... 26
Connection with the mains........................................................................................................................... 27
OPERATION ................................................................................................................................................... 27
Addressing ................................................................................................................................................... 27
DMX-PROTOCOL ........................................................................................................................................... 28
Special settings ............................................................................................................................................ 29
CLEANING AND MAINTENANCE ................................................................................................................. 29
Replacing the fuse ....................................................................................................................................... 30
TECHNICAL SPECIFICATIONS..................................................................................................................... 30
2/58
51786410X84NXS_V_1_2.DOC
INTRODUCTION ............................................................................................................................................. 31
INSTRUCTIONS DE SÉCURITÉ .................................................................................................................... 31
EMPLOI SELON LES PRESCRIPTIONS ....................................................................................................... 32
DESCRIPTION DE L'APPAREIL.................................................................................................................... 33
Features ....................................................................................................................................................... 33
Aperçue des parties ..................................................................................................................................... 34
INSTALLATION .............................................................................................................................................. 35
Installer/Remplacer la lampe ....................................................................................................................... 35
Ajustage de la lampe.................................................................................................................................... 36
Montage du projecteur ................................................................................................................................. 36
Connexions au contrôleur DMX-512 / raccord projecteur - projecteur ........................................................ 39
Alimentation ................................................................................................................................................. 40
MANIEMENT ................................................................................................................................................... 40
Contrôle par DMX ........................................................................................................................................ 40
Codage du projecteur................................................................................................................................... 40
Protocôle DMX ............................................................................................................................................. 41
Fonctions spéciaux ...................................................................................................................................... 42
NETTOYAGE ET MAINTENANCE ................................................................................................................. 42
Remplacer le fusible..................................................................................................................................... 43
CARACTÉRISTIQUES TECHNIQUES ........................................................................................................... 44
INTRODUCCIÓN............................................................................................................................................. 45
INSTRUCCIONES DE SEGURIDAD .............................................................................................................. 45
INSTRUCCIONES DE MANEJO .................................................................................................................... 46
DESCRIPCIÓN DEL APARATO..................................................................................................................... 47
Features ....................................................................................................................................................... 47
Descripción de las partes............................................................................................................................. 48
INSTALACIÓN ................................................................................................................................................ 49
Instalar/Reemplazar la lámpara ................................................................................................................... 49
Montaje del proyector................................................................................................................................... 50
Conexión al controlador DMX / conexión proyector - proyector .................................................................. 53
Alimentación................................................................................................................................................. 54
OPERACIÓN ................................................................................................................................................... 54
Control por DMX .......................................................................................................................................... 54
Direccionamiento del proyector ................................................................................................................... 54
Protócolo DMX ............................................................................................................................................. 55
Funciones especiales................................................................................................................................... 56
LIMPIEZA Y MANTENIMIENTO ..................................................................................................................... 56
Reemplazar el fusible................................................................................................................................... 57
ESPECIFICACIONES TÉCNICAS.................................................................................................................. 58
Das neueste Update dieser Bedienungsanleitung finden Sie im Internet unter:
You can find the latest update of this user manual in the Internet under:
Vous pouvez trouvez la dernière version de ce mode d'emploi dans l'Internet sous:
Vd. puede encontrar la versión más reciente de este manual en el Internet bajo:
www.eurolite.de
3/58
51786410X84NXS_V_1_2.DOC
USER MANUAL
TMH-155
Moving-Head
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
For your own safety, please read this user manual carefully before you initial start-up.
Every person involved with the installation, operation and maintenance of this device has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- include every supplementay update with the original manual
INTRODUCTION
Thank you for having chosen a EUROLITE TMH-155. You will see you have acquired a powerful and
versatile device.
Unpack your TMH-155.
Before you initial start-up, please make sure that there is no damage caused by transportation. Should there
be any, consult your dealer and do not use the device.
SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
18/58
51786410X84NXS_V_1_2.DOC
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it
on immediately. The arising condensation water might damage your device. Leave the device switched off
until it has reached room temperature.
This device falls under protection-class I. The power plug must only be plugged into a protection class I
outlet.
Never let the power-cord come into contact with other cables! Handle the power-cord and all connections
with the mains with particular caution!
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the
power-cord from time to time.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily
mean that the device is defective.
Caution: During the operation, the housing becomes very hot.
Danger of burning! Never install the device on a highly flammable surfaces (e.g. fair carpet)!
HEALTH HAZARD!
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!
Keep away children and amateurs!
OPERATING DETERMINATIONS
This device is a moving-head spot for creating decorative effects. This product is only allowed to be operated
with an alternating current of 230 V, 50 Hz and was designed for indoor use only.
This device is designed for professional use, e.g. on stages, in discotheques, theatres etc.
Lighting effects are not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged. Always hold the
fixture at the transport handles.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. Please make sure that the unit cannot be
touched or bumped. You endanger your own and the safety of others!
- - -m
The symbol
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than this value.
The device must only be installed on a non-flammable surface. In order to safeguard sufficient ventilation,
leave 50 cm of free space around the device. Please note that heat-sensitive objects may be deformed or
damaged by the emitted heat.
19/58
51786410X84NXS_V_1_2.DOC
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature ta = 45° C must never be exceeded.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like shortcircuit, burns, electric shock, lamp explosion, crash etc.
DESCRIPTION OF THE DEVICE
Features
Moving-Head with rotating gobos
Versatile Moving-Head with a wide range of illumination and decoration possibilities • 7 brilliant, dichroic
colours plus white • 7 rotating metal gobos plus open • Manual focus • Strobe-effect with 1-13 flashes per
second • Exact positioning within 360° Pan and 250° Tilt • 5 DMX-channels • 4-digit LED display for starting
address • For bright 150 W discharge lamp • Suitable EUROLITE controllers: DMX Operator
20/58
51786410X84NXS_V_1_2.DOC
Overview
(1) Projector head
(2) Objective-lens
(3) Yoke
(4) Base
(5) Carrying handle
(6) Power switch
(7) Power supply
(8) Fuseholder
(9) Ventilation fan
(10) DMX-In socket
(11) DMX-Out socket
(12) Display
(13) DIP-switches
(14) Function-DIP-switches
21/58
51786410X84NXS_V_1_2.DOC
INSTALLATION
Installing/Replacing the lamp
DANGER TO LIFE!
Only install the lamp with the device switched off!
Unplug from mains before!
For the installation, you need one HTI 90 V/150 W GY-9.5 lamp.
The lamp must only be changed when wearing appropriate protective clothing (protection glasses, protection
gloves, helmet with sight, leather apron).
CAUTION!
The lamp has to be replaced when it is damaged
or deformed due to the heat!
The lamp life given by the manufacturer must never be exceeded. This is why you need to take notes on the
operational time of the lamp and replace the lamp in time.
Keep exchanged lamp in a protective
container and remove accordingly.
During the operation, the lamp reaches
temperatures of up to 600° C.
Before replacing the lamp, unplug mains
lead and let the lamp cool down (approx.
10 minutes).
During the installation do not touch the glassbulbs bare-handed! Please follow the lamp
manufacturer's notes!
Do not install lamps with a higher wattage!
Lamps with a higher wattage generate
temperatures the device was not designed
for. Damages caused by non-observance are
not subject to warranty.
Procedure:
Step 1: Unscrew the fixation screws of the lamp cover and remove it.
Step 2: Unscrew the knurled-head screws of the lamp holder and remove it.
Step 3: If replacing the lamp, remove the old lamp from the lamp holder.
Step 4: Insert the lamp into the lamp holder.
Step 5: Replace the lamp holder and tighten the knurled-head screws.
Step 6: Adjust the lamp as described under lamp adjustment.
Step 7: Replace the lamp cover and tighten the fixation screws.
Do not operate this device with opened cover!
22/58
51786410X84NXS_V_1_2.DOC
Lamp adjustment
The lampholder is aligned at the factory. Due to differences between lamps, fine adjustment may improve
light performance.
Strike the lamp, open the shutter and the iris, set the
dimmer intensity onto 100 % and focus the light on a
flat surface (wall). Center the hot-spot (the brightest
part of the beam) using the 3 adjustment screws "A,
B, C”. Turn one screw at a time to drag the hot-spot
diagonally across the projected image. If you cannot
detect a hot-spot, adjust the lamp until the light is
even.
To reduce a hot-spot, pull the lamp in by turning all
three screws "A, B, C” clockwise ¼-turn at a time
until the light is evenly distributed.
If the light is brighter around the edge than it is in the
center, or if light output is low, the lamp is too far back
in the reflector. "Push” the lamp out by turning the
screws "A, B, C” counterclockwise ¼-turn at a time
the light is bright and evenly distributed.
Rigging
DANGER TO LIFE!
Please consider the EN 60598-2-17 and the respective national norms during the
installation! The installation must only be carried out by an authorized dealer!
The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight
for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the fixture staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
Procedure:
The projector should be installed outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material and the projector. If you lack these qualifications, do not attempt the installation yourself,
but instead use a professional structural rigger. Improper installation can result in bodily injury and.or
damage to property.
The projector has to be installed out of the reach of people.
23/58
51786410X84NXS_V_1_2.DOC
If the projector shall be lowered from the ceiling or high joists, professional trussing systems have to be
used. The projector must never be fixed swinging freely in the room.
Caution: Projectors may cause severe injuries when crashing down! If you have doubts concerning the
safety of a possible installation, do NOT install the projector!
Before rigging make sure that the installation area can hold a minimum point load of 10 times the projector's
weight.
DANGER OF FIRE!
When installing the device, make sure there is no highly-inflammable
material (decoration articles, etc.) within a distance of min. 0.5 m.
CAUTION!
Use 2 appropriate clamps to rig the fixture on the truss.
Follow the instructions mentioned at the bottom of the base.
Make sure that the device is fixed properly! Ensure that
the structure (truss) to which you are attaching the fixtures is secure.
The Moving-Head can be placed
directly on the stage floor or rigged in
any orientation on a truss without
altering its operation characteristics
(see the drawing).
The fixture’s base enables to be
mounted in two ways. Use the clamps
with screws M10 or M8 - check the
base bottom.
For overhead use (mounting height
>100 cm), always install a safety-rope
that can hold at least 12 times the
weight of the fixture. You must only use
safety-ropes with quick links with screw
cap. Pull the safety-rope through the
attachment eyelet and over the trussing
system or a safe fixation spot. Insert the
end in the quick link and tighten the
fixation screw.
The maximum drop distance must never exceed 20 cm.
A safety rope which already hold the strain of a crash or which is defective must not be used again.
DANGER TO LIFE!
Before taking into operation for the first time, the installation has to be approved by an expert!
24/58
51786410X84NXS_V_1_2.DOC
25/58
51786410X84NXS_V_1_2.DOC
(1) Omega-holders
(2) Clamp
(3) Quick-lock fastener
Screw one clamp each via a M12 screw and nut onto the Omega-holders.
Insert the quick-lock fasteners of the first Omega-holder into the respective holes on the bottom of the
device. Tighten the quick-lock fasteners fully clockwise. Install the second Omega-holder.
DMX-512 connection / connection between fixtures
The wires must not come into contact with each other, otherwise
the fixtures will not work at all, or will not work properly.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with
the fixture or one fixture with another.
Occupation of the XLR-connection:
If you are using controllers with this occupation, you can connect the DMX-output of the controller directly
with the DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other
XLR-outputs, you need to use adapter-cables.
Building a serial DMX-chain:
Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture. Always
connect one output with the input of the next fixture until all fixtures are connected.
Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 Ω resistor
between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture.
26/58
51786410X84NXS_V_1_2.DOC
Connection with the mains
Connect the device to the mains with the enclosed power supply cable.
The occupation of the connection-cables is as follows:
Cable
Brown
Blue
Yellow/Green
Pin
Live
Neutral
Earth
International
L
N
The earth has to be connected!
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
Lighting effects must not be connected to dimming-packs.
OPERATION
After you connected the effect to the mains, the TMH-155 starts running. During the Reset, the motors are
trimmed and the device is ready for use afterwards.
You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. In order to call up the different features, you first have to open the shutter
(control channel 5, DMX-value 241-255).
Turn the focus-screw next to the objective-lens for adjusting the focus in order to obtain a sharp projection.
Addressing
Each projector occupies 6 channels. To ensure that the control signals are properly directed to each
projector, the projector requires adressing. This is to be done for every single projector by changing the DIP
switches as set out in this table.
The starting address is defined as the first channel from which the TMH-155 will respond to the controller. If
you set, for example, the address to channel 7, the TMH-155 will use the channel 7 to 12 for control.
Please make sure that you don’t have any overlapping channels in order to control each TMH-155 correctly
and independently from any other fixture on the DMX data link. If two, three or more TMH-155 are addressed
similarly, they will work similarly.
Occupation of the DIP-switches:
27/58
51786410X84NXS_V_1_2.DOC
Controlling:
After having addressed all TMH-155, you may now start operating these via your lighting controller.
Note:
After switching on, the TMH-155 will automatically detect whether DMX 512 data is received or not. If the
data is received, the the display will show "A001" with actually set address and the DMX-LED is lit. If there is
no data received at the DMX-input, the DMX-LED is off.
This situation can occur if:
- the 3 PIN XLR plug (cable with DMX signal from controller) is not connected with the input of the TMH-155.
- the controller is switched off or defective, if the cable or connector is defective or the signal wires are swap
in the input connector.
DMX-PROTOCOL
Control channel 1 - Horizontal movement (Pan) (within 360°)
Push slider up in order to move the head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center). The head can be
stopped at any position you wish.
Control channel 2 - Vertical movement (Tilt) (within 250°)
Push slider up in order to move the head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center). The head can be
stopped at any position you wish.
Control channel 3 - Colour-wheel
DMX-value
0-15
16-31
32-47
48-63
64-79
80-95
96-111
112-127
128-255
Feature
Open / white
Pink
Blue
Orange
Green
Violet
Yellow
Red
Rainbow effect with increasing speed
Control channel 4 - Rotating gobo index, gobo rotation
DMX-value
0-127
128-189
190-193
194-255
Feature
Gobo indexing
Forwards gobo rotation with decreasing speed
No rotation
Backwards gobo rotation with increasing speed
Control channel 5 - Rotating gobo-wheel
DMX-value
0-31
32-63
64-95
96-127
128-159
160-191
192-223
224-255
Feature
Open
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
28/58
51786410X84NXS_V_1_2.DOC
Control channel 6 - Shutter, Dimmer
DMX-value
0-39
40-128
129-139
140-243
244-255
Feature
Shutter closed
Dimmer control (shutter open)
No function (shutter open)
Strobo effect with increasing speed (max. 13 flashes/second)
No function (shutter open)
Special settings
Via the Function-DIP-switches, you can adjust different modes and settings:
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tighly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
CAUTION!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
29/58
51786410X84NXS_V_1_2.DOC
The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly. The cooling-fans should be cleaned monthly.
The gobos may be cleaned with a soft brush. The interior of the fixture should be cleaned at least annually
using a vacuum-cleaner or an air-jet.
The dichroic colour-filters, the gobo-wheel and the internal lenses should be cleaned monthly.
There are no serviceable parts inside the device except for the lamp and the fuse. Maintenance and service
operations are only to be carried out by authorized dealers.
Please refer to the instructions under "Installing/Replacing the lamp".
Replacing the fuse
If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the fuse by a fuse of
same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anticlockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
230 V/50 Hz
Power consumption:
265 W
DMX-control-channels:
5
DMX-512-connection:
3-pin XLR
Flash-rate:
13 Hz
Colour-wheel:
7 dichroic filters and open
Rotating gobo-wheel:
7 gobos and open
Maximum PAN-movement:
360°
Maximum TILT-movement:
250°
Length of base:
330 mm
Width of yoke:
335 mm
Height (head horizontal):
360 mm
Weight (net):
12 kg
45° C
Maximum ambient temperature ta:
90° C
Maximum housing temperature tB (steady state):
Min.distance from flammable surfaces:
0.5 m
Min.distance to lighted object:
0.5 m
Fuse:
F 5 A, 250 V
Fitting lamps:
OMNILUX OTI 90V/150W GY 9,5 750h 6500K
No. 91201395
OMNILUX OTI 95V/152W GY 9,5 2000h 5000K
No. 91201396
OSRAM HTI 150W 90V/150W GY9,5 750h 6900K
No. 91201327
OSRAM HTI 152W 95V/150W GY9,5 2000h 5000K No. 91201329
Recommended controllers:
EUROLITE DMX Operator
No. 70064520
Wizard-512 DMX-Software + Interface
No. 51860101
Wizard-1024 DMX-Software + Interface
No. 51860110
Please note: Every information is subject to change without prior notice. 31.07.2003 ©
30/58
51786410X84NXS_V_1_2.DOC