Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
Y
P
O
Camera User Guide
ENGLISH
C
• Make sure you read this guide, including the “Safety
Precautions” section, before using the camera.
• Reading this guide will help you learn to use the camera
properly.
• Store this guide safely so that you can use it in the
future.
Downloaded from ManualsCamera.com Manuals
• Click the buttons in the lower right to access other pages.
: Next page
: Previous page
: Page before you clicked a link
• To jump to the beginning of a chapter, click the chapter
title at right.
From chapter title pages, you can access topics by
clicking their titles.
©CANON INC. 2013
CDD-E520-010
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
1
Package Contents
Preliminary Notes and Legal Information
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Battery Pack
NB-11L
Battery Charger
CB-2LF/CB-2LFE
Camera
Interface Cable
IFC-400PCU
DIGITAL CAMERA
Solution Disk*
(CD-ROM)
C
Warranty Card
*Contains software and PDF manuals (= 18).
•A memory card is not included (= 2).
Compatible Memory Cards
• Images recorded by the camera are intended for personal use. Refrain
from unauthorized recording that infringes on copyright law, and note that
even for personal use, photography may contravene copyright or other
legal rights at some performances or exhibitions, or in some commercial
settings.
Y
P
O
• The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Canon Customer Support Help Desk.
Wrist Strap
WS-800
Getting Started
• Take and review some test shots initially to make sure the images were
recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that result in the failure of an image to be recorded or to be
recorded in a way that is machine readable.
The following memory cards (sold separately) can be used, regardless of capacity.
• SD memory cards*
• SDHC memory cards*
• SDXC memory cards*
*Cards conforming to SD standards. However, not all memory cards have been verified
from ManualsCamera.com Manuals
to Downloaded
work with the camera.
• Although the LCD monitor is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specifications, in rare cases some pixels may be defective or may
appear as red or black dots. This does not indicate camera damage or
affect recorded images.
• The LCD monitor may be covered with a thin plastic film for protection
against scratches during shipment. If covered, remove the film before
using the camera.
• When the camera is used over an extended period, it may become warm.
This does not indicate damage.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2
Cover
Part Names and Conventions in This Guide
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
Zoom lever
Shooting: <i (telephoto)> /
<j (wide angle)>
Playback: <k (magnify)> /
<g (index)>
Lens
Speaker
Shutter button
Lamp
Power button
Microphone
Flash
Wi-Fi antenna area
Tripod socket
Memory card/battery cover
DC coupler cable port
Strap mount
C
• Instructions in this guide apply to the camera under default settings.
• For convenience, all supported memory cards are simply referred to as
the “memory card”.
• The tabs shown above titles indicate whether the function is used for still
images, movies, or both.
Still Images
:Indicates that the function is used when shooting or
viewing still images.
Movies
:Indicates that the function is used when shooting or
viewing movies.
Downloaded from ManualsCamera.com Manuals
Y
P
O
Screen (LCD monitor)
<1 (Playback)> button
Movie button
Mode switch
AV OUT (Audio/video output) /
DIGITAL terminal
Indicator
<n> button
<b (Exposure compensation)> /
< (Wi-Fi)> / Up button
<e (Macro)> / Left button
FUNC./SET button
<h (Flash)> / Right button
<l (Display)> / Down button
• The following icons are used to indicate functions that differ depending
on the camera model:
ELPH 130 IS IXUS 140 : Functions and precautions for the PowerShot ELPH 130
IS/IXUS 140 only
ELPH 120 IS IXUS 135 : Functions and precautions for the PowerShot ELPH 120
IS/IXUS 135 only
• This guide uses PowerShot ELPH 130 IS/IXUS 140 illustrations and
screenshots for all explanations.
• In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3
• The following camera buttons and controls are represented by icons.
<o> Up button on back
<q> Left button on back
<r> Right button on back
<p> Down button on back
• Shooting modes and on-screen icons and text are indicated in brackets.
• : Important information you should know
• : Notes and tips for expert camera use
• =xx: Pages with related information (in this example, “xx” represents a
page number)
C
Downloaded from ManualsCamera.com Manuals
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
Y
P
O
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4
5
Table of Contents
Package Contents..........................2
Compatible Memory Cards.............2
Preliminary Notes and Legal
Information......................................2
Part Names and Conventions in
This Guide......................................3
Table of Contents............................5
Contents: Basic Operations............6
Safety Precautions..........................7
Basic Guide..................... 10
Initial Preparations........................ 11
Trying the Camera Out.................15
Included Software, PDF
Manuals........................................18
System Map..................................22
Advanced Guide.............. 24
1
Camera Basics......................24
On/Off...........................................25
Shutter Button...............................26
Shooting Display Options.............26
FUNC. Menu.................................27
MENU Menu.................................28
Indicator Display...........................29
Clock.............................................29
2
Smart Auto Mode..................30
Shooting (Smart Auto)..................31
Common, Convenient Features....35
Image Customization Features.....38
Helpful Shooting Features............40
Customizing Camera Operation...42
3
Other Shooting Modes.........44
Specific Scenes............................45
Applying Special Effects...............46
Special Modes for Other
Purposes.......................................50
4
P Mode...................................54
C
Shooting in Program AE
([P] Mode).....................................55
Image Brightness (Exposure
Compensation).............................55
Color and Continuous Shooting....57
Shooting Range and Focusing.....60
Flash.............................................64
Other Settings...............................65
Downloaded from ManualsCamera.com Manuals
Playback Mode.....................66
Viewing.........................................67
Browsing and Filtering Images.....69
Image Viewing Options.................70
Protecting Images.........................72
Erasing Images.............................74
Rotating Images............................76
Image Categories.........................77
Editing Still Images.......................78
Editing Movies..............................81
Y
P
O
6
Wi-Fi Functions....................83
What You Can Do With Wi-Fi........84
Using Wi-Fi to Send Images
From the Camera..........................85
Wi-Fi (Wireless LAN)
Precautions...................................85
Security Precautions.....................86
Glossary........................................87
Registering a Camera Nickname
(First time only).............................88
Connecting to Web Services.........89
Connecting to a Smartphone........91
Connecting to Another Camera....93
Connecting to a Computer............94
Connecting to a Printer.................99
Sending Images..........................101
Sending Images to a Computer
via CANON iMAGE
GATEWAY...................................103
Geotagging Images on the
Camera.......................................103
Editing or Erasing Wi-Fi
Settings.......................................104
7
Setting Menu.......................106
Adjusting Basic Camera
Functions....................................107
8
Accessories........................113
Optional Accessories.................. 114
Using Optional Accessories........ 115
Printing Images........................... 117
9
Appendix.............................125
Troubleshooting..........................126
On-Screen Messages.................129
On-Screen Information...............131
Functions and Menu Tables........134
Handling Precautions..................140
Specifications..............................140
Index...........................................144
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
5
Cover
Contents: Basic Operations
Applying special effects
Preliminary Notes and
Legal Information
4 Shoot
zz
Use camera-determined settings (Auto Mode)..................................... 31
Shooting people well
I
Portraits
(= 45)
P
Against Snow
(= 45)
Miniature Effect
(= 47)
t
Fireworks
(= 45)
Vivid Colors
(= 46)
Poster Effect
(= 46)
Fish-Eye Effect
(= 46)
Basic Guide
Advanced Guide
Matching specific scenes
Low Light
(= 45)
Contents: Basic Operations
C
Toy Camera Effect
(= 48)
Y
P
O
Monochrome
(= 48)
zz
Focus on faces.......................................................................... 31, 45, 61
zz
Without using the flash (Flash Off)........................................................ 37
zz
Include yourself in the shot (Self-Timer)......................................... 35, 51
zz
Add a date stamp.................................................................................. 37
1 View
zz
View images (Playback Mode).............................................................. 67
zz
Automatic playback (Slideshow)........................................................... 71
zz
On a TV................................................................................................115
zz
On a computer...................................................................................... 19
zz
Browse through images quickly............................................................ 69
zz
Erase images........................................................................................ 74
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
E Shoot/View Movies
zz
Shoot movies........................................................................................ 31
zz
View movies (Playback Mode).............................................................. 67
Downloaded from ManualsCamera.com Manuals
6
c
Print
zz
Print pictures........................................................................................117
Save
zz
Save images to a computer via a cable................................................ 19
Use Wi-Fi Functions
zz
Send images to a smartphone.............................................................. 91
zz
Share images online............................................................................. 94
zz
Send images to a computer................................................................ 103
Safety Precautions
• Before using the product, please ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
• The safety precautions noted on the following pages are intended to
prevent injuries to yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold
accessories you use.
Warning
Denotes the possibility of serious injury or death.
Y
P
O
• Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage eyesight. In
particular, remain at least 1 meter (39 inches) away from infants when using the flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
C
Downloaded from ManualsCamera.com Manuals
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heat to the product.
• Avoid dropping or subjecting the product to severe impacts.
• To avoid the risk of injury, do not touch the interior of the product if
it has been dropped or otherwise damaged.
• Stop using the product immediately if it emits smoke, a strange
smell, or otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
• Do not let the product come into contact with water (e.g. sea water)
or other liquids.
• Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquids or foreign objects come into contact with the camera interior,
immediately turn the camera off and remove the battery.
If the battery charger becomes wet, unplug it from the outlet and consult
your camera retailer or a Canon Customer Support Help Desk.
• Use only the recommended battery.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
7
• Do not place the battery near or in direct flame.
• Unplug the power cord periodically, and using a dry cloth, wipe away
any dust and dirt that has collected on the plug, the exterior of the
power outlet, and the surrounding area.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated capacity
of the electrical outlet or wiring accessories. Do not use if the power
cord or plug are damaged, or not fully plugged into the outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact
the terminals or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could cause
injury and damage the surroundings. In the event that a battery leaks and the battery
electrolyte contacts eyes, mouth, skin or clothing, immediately flush with water.
• Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the camera in places where use of electronic devices is
restricted, such as inside airplanes and medical facilities.
• Do not play the supplied CD-ROM(s) in any CD player that does not
support data CD-ROMs.
It is possible to suffer hearing loss from listening with headphones to the
loud sounds of a CD-ROM played on an audio CD player (music player).
Additionally, this could damage the speakers.
Caution
Denotes the possibility of injury.
C
• When holding the camera by the strap, be careful not to bang it, subject
it to strong impacts or shocks, or let it get caught on other objects.
• Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
• Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
• When using the flash, be careful not to cover it with your fingers or clothing.
This
could result in from
burns or
damage to the flash.
Downloaded
ManualsCamera.com
Manuals
• Avoid using, placing or storing the product in the following places:
-Places subject to direct sunlight
-Places subject to temperatures above 40 °C (104 °F)
-Humid or dusty areas
These could cause leakage, overheating or an explosion of the battery,
resulting in electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger casing.
• The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
Caution
Denotes the possibility of damage to the equipment.
Y
P
O
• Do not aim the camera at bright light sources (such as the sun on a
clear day).
Doing so may damage the image sensor.
• When using the camera on a beach or at a windy location, be careful
not to allow dust or sand to enter the camera.
This may cause the product to malfunction.
• In regular use, small amounts of smoke may be emitted from the flash.
This is due to the high intensity of the flash burning dust and foreign materials
stuck to the front of the unit. Please use a cotton swab to remove dirt, dust or other
foreign matter from the flash to prevent heat build-up and damage to the unit.
• Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
• Before you discard the battery, cover the terminals with tape or other
insulators.
Contacting other metal materials may lead to fire or explosions.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Unplug the battery charger from the power outlet after charging is
complete, or when you are not using it.
• Do not place anything, such as cloth, on top of the battery charger
while it is charging.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
8
Cover
• Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion,
resulting in fire or damage.
Preliminary Notes and
Legal Information
Contents: Basic Operations
• Do not sit down with the camera in your pocket.
Doing so may cause malfunctions or damage the screen.
Basic Guide
• When putting the camera in your bag, ensure that hard objects do
not come into contact with the screen.
• Do not attach any hard objects to the camera.
Doing so may cause malfunctions or damage the screen.
C
Downloaded from ManualsCamera.com Manuals
Advanced Guide
Y
P
O
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
9
Basic Guide
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
4
Downloaded from ManualsCamera.com Manuals
Gives basic instructions, from initial preparations to
shooting, playback, and saving on a computer
C
Y
P
O
Initial Preparations....................11
Trying the Camera Out..............15
Included Software, PDF Manuals............................18
System Map...............................22
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
10
Cover
Initial Preparations
2 Charge the battery.
zz
CB-2LF: Flip out the plug ( ) and plug
Prepare for shooting as follows.
Attaching the Strap
CB-2LF
zz
Thread the end of the strap through the
strap hole ( ), and then pull the other
end of the strap through the loop on the
threaded end ( ).
Y
P
O
CB-2LFE
3 Remove the battery.
Holding the Camera
zz
After unplugging the battery charger,
zz
Place the strap around your wrist.
zz
When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. Do not rest
your fingers on the flash.
Charging the Battery
C
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
1 Insert the battery.
zz
After aligning the o marks on the battery
and charger, insert the battery by pushing
it in ( ) and down ( ).
Downloaded from ManualsCamera.com Manuals
the charger into a power outlet ( ).
zz
CB-2LFE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
XX
The charging lamp turns orange and
charging begins.
XX
When charging is finished, the lamp turns
green.
remove the battery by pushing it in ( )
and up ( ).
• To protect the battery and keep it in optimal condition, do not charge
it continuously for more than 24 hours.
• For battery chargers that use a power cord, do not attach the
charger or cord to other objects. Doing so could result in malfunction
or damage to the product.
• For details on charging time and the number of shots and recording time
possible with a fully charged battery, see Number of Shots/Recording Time,
Playback Time (= 141).
• Charged batteries gradually lose their charge, even when they are not used.
Charge the battery on (or immediately before) the day of use.
• The charger can be used in areas with 100 – 240 V AC power (50/60 Hz). For
power outlets in a different format, use a commercially available adapter for
the plug. Never use an electrical transformer designed for traveling, which may
damage the battery.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
11
4 Insert the memory card.
Inserting the Battery and Memory Card
zz
Insert the memory card facing as shown
Insert the included battery and a memory card (sold separately).
Note that before using a new memory card (or a memory card formatted
in another device), you should format the memory card with this camera
(= 109).
until it clicks into the locked position.
zz
Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
1 Check the card’s write-protect
tab.
zz
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked (downward) position.
Slide the tab up until it clicks into the
unlocked position.
2 Open the cover.
zz
Slide the cover ( ) and open it ( ).
3 Insert the battery.
C
zz
While pressing the battery lock in the
Terminals
Battery
Lock
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
zz
If you insert the battery facing the wrong
way, it cannot be locked into the correct
position. Always confirm that the battery
is facing the right way and locks when
inserted.
Downloaded from ManualsCamera.com Manuals
Label
Y
P
O
5 Close the cover.
zz
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
• For guidelines on how many shots or hours of recording can be saved on one
memory card, see “Number of 4:3 Shots per Memory Card” (= 141).
Removing the Battery and Memory Card
Remove the battery.
zz
Open the cover and press the battery
lock in the direction of the arrow.
XX
The battery will pop up.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
12
Cover
3 Set the home time zone.
Remove the memory card.
zz
Push the memory card in until it clicks,
and then slowly release it.
XX
The memory card will pop up.
4 Finish the setup process.
zz
Press the <m> button when finished.
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this way
is recorded in image properties when you shoot, and it is used when you
manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (= 37).
1 Turn the camera on.
C
XX
The [Date/Time] screen is displayed.
2 Set the date and time.
zz
Press the <q><r> buttons to choose an
option.
zz
Press the <o><p> buttons to specify
the date and time.
zz
When finished, press the <m> button.
Downloaded from ManualsCamera.com Manuals
your home time zone.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Setting the Date and Time
zz
Press the power button.
zz
Press the <q><r> buttons to choose
Y
P
O
After a confirmation message, the setting
screen is no longer displayed.
zz
To turn off the camera, press the power
button.
• Unless you set the date, time, and home time zone, the [Date/Time]
screen will be displayed each time you turn the camera on. Specify
the correct information.
• To set daylight saving time (1 hour ahead), choose [
choose [ ] by pressing the <o><p> buttons.
] in step 2 and then
Changing the Date and Time
Adjust the date and time as follows.
1 Access the camera menu.
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Press the <n> button.
13
Cover
Display Language
2 Choose [Date/Time].
zz
Move the zoom lever to choose the [3]
tab.
zz
Press the <o><p> buttons to choose
[Date/Time], and then press the <m>
button.
Change the display language as needed.
1 Enter Playback mode.
zz
Press the <1> button.
3 Change the date and time.
zz
Follow step 2 on = 13 to adjust the
settings.
zz
Press the <n> button to close the
menu.
• Date/time settings can be retained for about 3 weeks by the camera’s built-in
date/time battery (backup battery) after the battery pack is removed.
• The date/time battery will be charged in about 4 hours once you insert a
charged battery or connect the camera to an AC adapter kit (sold separately,
= 114), even if the camera is left off.
• Once the date/time battery is depleted, the [Date/Time] screen will be
displayed when you turn the camera on. Follow the steps on = 13 to set the
date and time.
C
2 Access the setting screen.
Y
P
O
zz
Press and hold the <m> button, and
then immediately press the <n>
button.
3 Set the display language.
zz
Press the <o><p><q><r> buttons to
choose a language, and then press the
<m> button.
XX
Once the display language has been set,
the setting screen is no longer displayed.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• The current time is displayed if you wait too long in step 2 after pressing the
<m> button before you press the <n> button. In this case, press the
Downloaded from ManualsCamera.com Manuals
<m> button to dismiss the time display and repeat step 2.
• You can also change the display language by pressing the <n> button
] on the [3] tab.
and choosing [Language
14
Trying the Camera Out
Still Images
Movies
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Cover
4 Shoot.
Shooting Still Images
Focus.
zz
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1 Turn the camera on.
zz
Press the power button.
XX
The startup screen is displayed.
Y
P
O
Shoot.
2 Enter [A] mode.
zz
Press the shutter button all the way
zz
Set the mode switch to [A].
zz
Aim the camera at the subject. The
C
camera will make a slight clicking noise
as it determines the scene.
XX
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
XX
Frames displayed around any detected
subjects indicate that they are in focus.
down.
XX
As the camera shoots, a shutter sound
is played, and in low-light conditions, the
flash fires automatically.
zz
Keep the camera still until the shutter
sound ends.
XX
Your shot is only displayed until the
camera is ready to shoot again.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3 Compose the shot.
zz
To zoom in and enlarge the subject, move
Downloaded from
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
ManualsCamera.com
Manuals
it toward <j> (wide angle).
15
Shooting Movies
Start shooting.
zz
Press the movie button. The camera
Elapsed Time
beeps once as recording begins, and
[ Rec] is displayed with the elapsed time.
XX
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
XX
Frames displayed around any detected
faces indicate that they are in focus.
zz
Once recording begins, take your finger
off the movie button.
Finish shooting.
zz
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
C
Downloaded from ManualsCamera.com Manuals
Cover
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1 Enter Playback mode.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
zz
Press the <1> button.
Advanced Guide
XX
Your last shot is displayed.
1
2
3
4
5
6
7
8
9
Y
P
O
2 Browse through your images.
zz
To view the previous image, press the
<q> button. To view the next image,
press the <r> button.
zz
To access Scroll Display mode, press and
hold the <q><r> buttons for at least one
second. In this mode, press the <q><r>
buttons to browse through images.
zz
To return to single-image display, press
the <m> button.
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
16
zz
Movies are identified by a [
play movies, go to step 3.
] icon. To
3 Play movies.
zz
Press the <m> button, press the
<o><p> buttons to choose [ ], and
then press the <m> button again.
XX
Playback now begins, and after the movie
] is displayed.
is finished, [
zz
To adjust the volume, press the <o><p>
buttons.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
C
Erasing the Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
2 Erase the image.
zz
Press the <m> button, press the
<o><p> buttons to choose [a], and
then press the <m> button again.
zz
After [Erase?] is displayed, press the
<q><r> buttons to choose [Erase], and
then press the <m> button.
XX
The current image is now erased.
zz
To cancel erasure, press the <q><r>
buttons to choose [Cancel], and then
press the <m> button.
Y
P
O
• You can also erase all images at once (= 75).
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
1 Choose an image to erase.
zz
Press the <q><r> buttons to choose an
image.
Downloaded from ManualsCamera.com Manuals
17
Included Software, PDF Manuals
PDF Manuals
The software and PDF manuals on the included DIGITAL CAMERA Solution
Disk (CD-ROM) (= 2) are introduced below, with instructions for
installation, and saving images to a computer.
After installing the software on the CD-ROM, you can do the following
things on your computer.
CameraWindow
zz
Import images and change camera settings
ImageBrowser EX
zz
Manage images: view, search, and organize
zz
Print and edit images
C
Using the included software, you can update to the latest version, and
download new functions via the Internet (some software excluded). Be sure
to install the software on a computer with an Internet connection so you can
use this function.
• Internet access is required to use this function, and any ISP account
charges and access fees must be paid separately.
Downloaded from ManualsCamera.com Manuals
operation.
Software Guide
Software
Auto Update Function
Camera User Guide
zz
Refer to this guide for a more in-depth understanding of camera
zz
Refer to this guide when using the included software. The guide can be
accessed from the help system of included software (some software
excluded).
Y
P
O
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
18
System Requirements
The included software can be used on the following computers. Adobe
Reader is required to view the PDF manuals.
Windows
Operating
System*1
Windows 8
Windows 7 SP1
Windows Vista SP2
Windows XP SP3
Macintosh
Mac OS X 10.6
Mac OS X 10.7
Mac OS X 10.8*2
• Check the Canon website for the latest system requirements, including
supported OS versions.
Computer
Computers running one of the above operating systems
(preinstalled), with an included USB port and Internet connection
Processor
Still images: 1.6 GHz or higher,
Movies: Core 2 Duo 1.66 GHz
or higher
RAM
Still images
Windows 8 (64 bit), Windows 7
(64 bit): 2 GB or more
Windows 8 (32 bit), Windows 7
(32 bit), Windows Vista: 1 GB
or more
Windows XP: 512 MB or more
Movies
1 GB or more
Interfaces
USB and Wi-Fi
Free Hard Disk
Space
440 MB or more*
Display
1024 x 768 resolution or higher
3
Mac OS X 10.7 – 10.8: Core 2
Duo or higher,
Mac OS X 10.6: Core Duo
1.83 GHz or higher
Mac OS X 10.7 – 10.8: 2 GB
or more,
Mac OS X 10.6: 1 GB or more
550 MB or more*
*1Wi-Fi image transfer to a computer requires Windows 8, Windows 7 SP1, Mac OS X
10.6.8, Mac OS X 10.7, or Mac OS X 10.8.2 or later.
*2Information on computer models compatible with Mac OS X 10.8 is available on the
Apple website.
*3Includes Silverlight 5.1 (max. 100 MB). Additionally, in Windows XP, Microsoft .NET
Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some
time, depending on computer performance.
3
Downloaded from ManualsCamera.com Manuals
C
Installing the Software
Y
P
O
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
Using the software auto update function, you can update to the latest
version and download new functions via the Internet (some software
excluded), so be sure to install the software on a computer with an Internet
connection.
What you will need:
zz
Computer
zz
Interface cable (= 2)
zz
Included CD-ROM (DIGITAL CAMERA Solution Disk) (= 2)
1 Insert the CD-ROM in the
computer’s CD-ROM drive.
zz
Insert the included CD-ROM (DIGITAL
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
CAMERA Solution Disk) (= 2) in the
computer’s CD-ROM drive.
zz
On a Macintosh computer, after inserting
the disc, double-click the desktop disc
icon to open it, and then double-click the
[ ] icon displayed.
19
2 Begin the installation.
4 Install the files.
zz
Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
3 When a message is displayed
prompting you to connect
the camera, connect it to a
computer.
zz
With the camera turned off, open the
cover ( ). With the smaller plug of the
included interface cable (= 2) in the
orientation shown, insert the plug fully
into the camera terminal ( ).
C
zz
Insert the larger plug of the interface
cable in the computer’s USB port. For
details about USB connections on the
computer, refer to the computer user
manual.
Downloaded from ManualsCamera.com Manuals
zz
Turn the camera on, and follow the
on-screen instructions to complete the
installation process.
XX
The software will connect to the Internet
to update to the latest version and
download new functions. Installation may
take some time, depending on computer
performance and the Internet connection.
zz
Click [Finish] or [Restart] on the screen
after installation and remove the CDROM when the desktop is displayed.
zz
Turn the camera off and disconnect the
cable.
Y
P
O
• When not connected to the Internet, there are the following limitations.
-The screen in step 3 will not be displayed.
-Some functions may not be installed.
• The first time you connect the camera to the computer, drivers will be installed,
so it may take a few minutes until camera images are accessible.
• If you have several cameras that were bundled with ImageBrowser EX on the
included CD-ROMs, be sure to use each camera with their included CD-ROM
and follow the on-screen installation instructions for each. Doing so will ensure
that each camera will receive the correct updates and new functions via the
auto update function.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
20
Saving Images to a Computer
CameraWindow
zz
Click [Import Images from Camera], and
1 Connect the camera to the
then click [Import Untransferred Images].
computer.
XX
Images are now saved to the Pictures
zz
Follow step 3 in “Installing the Software”
(= 20) to connect the camera to a
computer.
2 Turn the camera on to access
CameraWindow.
zz
Press the <1> button to turn the camera on.
zz
On a Macintosh computer, CameraWindow is
displayed when a connection is established
between the camera and computer.
zz
For Windows, follow the steps introduced
C
]
zz
Choose [Downloads Images From Canon
Camera using Canon CameraWindow]
and then click [OK].
zz
Double click [
3 Save the images to the
computer.
Windows 7 and Mac OS X 10.6 are used here for the sake of illustration.
below.
zz
In the screen that displays, click the [
link to modify the program.
Cover
folder on the computer, in separate
folders named by date.
zz
After images are saved, close
CameraWindow, press the <1> button
to turn the camera off, and unplug the
cable.
zz
For instructions on viewing images on
a computer, refer to the Software Guide
(= 18).
Y
P
O
• In Windows 7, if the screen in step 2 is not displayed, click the [ ] icon in the
taskbar.
• To start CameraWindow in Windows Vista or XP, click [Downloads Images
From Canon Camera using Canon CameraWindow] on the screen displayed
when you turn the camera on in step 2. If CameraWindow is not displayed,
click the [Start] menu and choose [All Programs] ► [Canon Utilities] ►
[CameraWindow] ► [CameraWindow].
• On a Macintosh computer, if CameraWindow is not displayed after step 2, click
the [CameraWindow] icon in the Dock (the bar at the bottom of the desktop).
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
].
Downloaded from ManualsCamera.com Manuals
21
• Although you can save images to a computer simply by connecting your
camera to the computer without using the software, the following limitations
apply.
-It may take a few minutes after you connect the camera to the computer until
camera images are accessible.
-Images shot in vertical orientation may be saved in horizontal orientation.
-Image protection settings may be cleared from images saved to a computer.
-Some problems may occur when saving images or image information,
depending on the operating system version, the software in use, or image
file sizes.
-Some functions provided by the software may not be available, such as
movie editing.
Using the PDF Manuals
Camera User Guide
Software Guide
C
zz
The guide can be accessed from the help system of included software
(some software excluded).
• It may not be possible to install the PDF manuals on computers that do not
meet the system requirements (= 19). However, you can view the manuals
on a computer that supports Adobe Reader by copying the PDF files in the
Readme folder on the CD-ROM directly to a convenient location on the
computer.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Included
Accessories
Wrist Strap
WS-800
Battery Pack
NB-11L*1
Y
P
O
Battery Charger
CB-2LF/
CB-2LFE*1
DIGITAL
CAMERA
Solution Disk
Interface Cable IFC-400PCU*1
Power
zz
Access this guide by double-clicking the desktop shortcut icon.
Cover
System Map
Memory Card
Card Reader
Cable
AV Cable AVC-DC400
AC Adapter Kit
ACK-DC90
Flash Unit
Windows/
Macintosh
Computer
TV/Video
System
Canon-brand PictBridgeCompatible Printers
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
High-Power Flash
HF-DC2*2
*1Also available for purchase separately.
*2High-Power Flash HF-DC1 also supported.
Downloaded from ManualsCamera.com Manuals
22
Cover
Use of genuine Canon accessories is recommended.
Preliminary Notes and
Legal Information
This product is designed to achieve excellent performance when used with genuine
Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire,
etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage
and/or explosion of a battery pack). Please note that this warranty does not apply to
repairs arising out of the malfunction of non-genuine Canon accessories, although you
may request such repairs on a chargeable basis.
Note that availability varies by area, and some accessories may no longer be
available.
C
Downloaded from ManualsCamera.com Manuals
Contents: Basic Operations
Basic Guide
Advanced Guide
Y
P
O
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
23
Advanced Guide
4
Downloaded from ManualsCamera.com Manuals
1
Contents: Basic Operations
Advanced Guide
Y
P
O
Practical guide that introduces other camera basics and
describes shooting and playback options
On/Off.........................................25
Shutter Button...........................26
Shooting Display Options........26
FUNC. Menu...............................27
Preliminary Notes and
Legal Information
Basic Guide
Camera Basics
C
Cover
MENU Menu...............................28
Indicator Display.......................29
Clock..........................................29
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
24
Cover
On/Off
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of
inactivity.
Shooting Mode
zz
Press the power button to turn the
camera on and prepare for shooting.
zz
To turn the camera off, press the power
button again.
Playback Mode
zz
Press the <1> button to turn the camera
on and view your shots.
zz
To turn the camera off, press the <1>
button again.
• To switch to Playback mode from Shooting mode, press the <1> button.
• To switch to Shooting mode from Playback mode, press the shutter button
halfway (= 26).
• The lens will be retracted after about one minute once the camera is in
Playback mode. You can turn the camera off when the lens is retracted by
pressing the <1> button.
C
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates
the screen (Display Off) and then turns itself off after a specific period of
inactivity.
• You can deactivate Auto Power Down and adjust the timing of Display Off, if
you prefer (= 109).
• Power saving is not active while the camera is connected to a computer via
the interface cable (= 21), or when connected to other devices via Wi-Fi
(= 83).
Y
P
O
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity.
In about two more minutes, the lens is retracted and the camera turns itself
off. To activate the screen and prepare for shooting when the screen is off
but the lens is still out, press the shutter button halfway (= 26).
Downloaded from ManualsCamera.com Manuals
25
Shutter Button
Shooting Display Options
To ensure your shots are in focus, always begin by holding the shutter
button halfway down, and once the subject is in focus, press the button all
the way down to shoot.
In this manual, shutter button operations are described as pressing the
button halfway or all the way down.
Press the <p> button to view other information on the screen, or to hide
the information. For details on the information displayed, see On-Screen
Information (= 131).
zz
Press the shutter button halfway. The
camera beeps twice, and AF frames are
displayed around image areas in focus.
2 Press all the way down. (From
the halfway position, press fully
to shoot.)
C
XX
The camera shoots, as a shutter sound
is played.
zz
Keep the camera still until the shutter
sound ends.
• Images may be out of focus if you shoot without initially pressing the
shutter button halfway.
• Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
Downloaded from ManualsCamera.com Manuals
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1 Press halfway. (Press lightly to
focus.)
Cover
Y
P
O
Information is displayed
No information is
displayed
• Screen brightness is automatically increased by the night display function
when you are shooting under low light, making it easier to check how shots
are composed. However, on-screen image brightness may not match the
brightness of your shots. Note that any on-screen image distortion or jerky
subject motion will not affect recorded images.
• For playback display options, see Switching Display Modes (= 68).
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
26
FUNC. Menu
4 Finish the setup process.
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(= 135 – 136) or playback mode (= 139).
1 Access the FUNC. menu.
2 Choose a menu item.
zz
Press the <o><p> buttons to choose a
Menu Items
menu item, and then press the <m> or
<r> button.
zz
In some menu items, functions can be
specified simply by pressing the <m>
or <r> button, or another screen is
displayed for configuring the function.
3 Choose an option.
C
zz
Press the <o><p> buttons to choose
an option.
zz
Options labeled with a [
XX
The screen before you pressed the
<m> button in step 1 is displayed again,
showing the option you configured.
• To undo any accidental setting changes, you can restore the camera’s default
settings (= 112).
zz
Press the <m> button.
Options
zz
Press the <m> button.
Y
P
O
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
] icon can be
configured by pressing the <n>
button.
zz
To return to the menu items, press the
<q> button.
Downloaded from ManualsCamera.com Manuals
27
MENU Menu
3 Choose a setting.
Configure a variety of camera functions through other menus as follows.
Menu items are grouped by purpose on tabs, such as shooting [4],
playback [1], and so on. Note that available settings vary depending on
the selected shooting or playback mode (= 137 – 139).
1 Access the menu.
zz
Press the <n> button.
2 Choose a tab.
zz
Move the zoom lever to choose a tab.
zz
After you have pressed the <o><p>
buttons to choose a tab initially, you can
switch between tabs by pressing the
<q><r> buttons.
C
zz
Press the <o><p> buttons to choose a
setting.
zz
To choose settings with options not
shown, first press the <m> or <r>
button to switch screens, and then press
the <o><p> buttons to select the
setting.
zz
To return to the previous screen, press
the <n> button.
Y
P
O
4 Choose an option.
zz
Press the <q><r> buttons to choose an
option.
5 Finish the setup process.
zz
Press the <n> button to return to the
screen displayed before you pressed the
<n> button in step 1.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• To undo any accidental setting changes, you can restore the camera’s default
settings (= 112).
Downloaded from ManualsCamera.com Manuals
28
Indicator Display
The indicator on the back of the camera (= 3) lights up or blinks
depending on the camera status.
Color
Indicator
Status
On
Green
Blinking
Cover
Clock
You can check the current time.
Contents: Basic Operations
zz
Press and hold the <m> button.
Camera Status
XX
The current time appears.
Connected to a computer (= 21), or display off
(= 25, 108, 109)
zz
If you hold the camera vertically while
Starting up, recording/reading/transmitting images,
shooting long exposures (= 52), or connected/
transmitting via Wi-Fi
• When the indicator blinks green, never turn the camera off, open the
memory card/battery cover, or shake or jolt the camera, which may
corrupt images or damage the camera or memory card.
C
Downloaded from ManualsCamera.com Manuals
Preliminary Notes and
Legal Information
using the clock function, it will switch
to vertical display. Press the <q><r>
buttons to change the display color.
zz
Press the <m> button again to cancel
the clock display.
Y
P
O
• When the camera is off, press and hold the <m> button, then press the power
button to display the clock.
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
29
Cover
Preliminary Notes and
Legal Information
4
Downloaded from ManualsCamera.com Manuals
2
Smart Auto Mode
Y
P
O
Convenient mode for easy shots with greater control
over shooting
C
Shooting (Smart Auto)..............31
Common, Convenient Features....................................35
Image Customization Features....................................38
Helpful Shooting Features.......40
Customizing Camera Operation..................................42
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
30
Shooting (Smart Auto)
Still Images
Movies
For fully automatic selection at optimal settings for specific scenes, simply
let the camera determine the subject and shooting conditions.
zz
Press the power button.
XX
The startup screen is displayed.
2 Enter [A] mode.
zz
Set the mode switch to [A].
zz
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
XX
Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen (= 33, 34).
XX
Frames displayed around any detected
subjects indicate that they are in focus.
C
zz
To zoom in and enlarge the subject, move
Zoom Bar
4 Shoot.
Shooting Still Images
Focus.
zz
Press the shutter button halfway. The
camera beeps twice after focusing, and
AF frames are displayed to indicate
image areas in focus.
XX
Several AF frames are displayed when
multiple areas are in focus.
1 Turn the camera on.
3 Compose the shot.
Cover
Y
P
O
Shoot.
zz
Press the shutter button all the way
down.
XX
As the camera shoots, a shutter sound
is played, and in low-light conditions, the
flash fires automatically.
zz
Keep the camera still until the shutter
sound ends.
XX
Your shot is only displayed until the
camera is ready to shoot again.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle). (A zoom bar
showing the zoom position is displayed.)
Downloaded from ManualsCamera.com Manuals
31
Cover
Still Images/Movies
Shooting Movies
Start shooting.
zz
Press the movie button. The camera
Elapsed Time
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time.
XX
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
XX
Frames displayed around any detected
faces indicate that they are in focus.
zz
Once recording begins, take your finger
off the movie button.
esize the subject and
R
recompose the shot as needed.
zz
To resize the subject, repeat the
C
operations in step 3 (= 31). However,
note that the sound of camera operations
will be recorded.
zz
When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finish shooting.
• If the camera is turned on while the <p> button is held down, the
camera will no longer sound. To activate sounds again, press the
<n> button and choose [Mute] on the [3] tab, and then press
the <q><r> buttons to choose [Off].
Still Images
• A flashing [ ] icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or take
other measures to keep it still.
• If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see Flash Range (= 142).
• The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing
range (shooting range), see Shooting Range (= 142).
• To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
• A blinking [h] icon displayed when you attempt to shoot indicates
that shooting is not possible until the flash has finished recharging.
Shooting can resume as soon as the flash is ready, so either press
the shutter button all the way down and wait, or release it and press
it again.
Y
P
O
• You can change how long images are displayed after shots (= 43).
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
zz
Recording will stop automatically when
the memory card becomes full.
Downloaded from ManualsCamera.com Manuals
32
Still Images
Movies
• The camera may become warm when shooting movies repeatedly
over an extended period. This does not indicate damage.
Microphone • Keep your fingers away from the
microphone while shooting movies.
Blocking the microphone may prevent
audio from being recorded or may
cause the recording to sound muffled.
• Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
• Audio recording is monaural.
Movies
Scene Icons
In [A] mode, shooting scenes determined by the camera are indicated
by the icon displayed, and corresponding settings are automatically
selected for optimal focusing, subject brightness, and color.
Subject
People
Other Subjects
Icon
In
At Close Background
1
Color
Motion* Range
In
Shadows
Motion*1 on Face*1
Background
Y
P
O
Bright
Backlit
Gray
–
With Blue
Sky
Backlit
C
Light Blue
–
Sunsets
–
–
Orange
Spotlights
Dark
Tripod
Used
*2
–
Dark Blue
*2
–
*1Not displayed for movies.
*2Displayed in dark scenes when the camera is held still, as when mounted on a tripod.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Try shooting in [G] mode (= 54) if the scene icon does not match
actual shooting conditions, or if it is not possible to shoot with your
expected effect, color, or brightness.
Downloaded from ManualsCamera.com Manuals
33
Still Images
Movies
Image Stabilization Icons
Movies
On-Screen Frames
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in
[A] mode.
Image stabilization for still
images
Still Images
Image stabilization for movies,
reducing strong camera shake,
as when shooting while walking
(Dynamic IS)
Image stabilization for still
images, when panning*
Image stabilization for slow
camera shake, such as when
shooting movies at telephoto
(Powered IS)
Image stabilization for macro
shots (Hybrid IS)
No image stabilization, because
the camera is mounted on
a tripod or held still by other
means
*Displayed when you pan, following moving subjects with the camera. When you follow
subjects moving horizontally, image stabilization only counteracts vertical camera
shake, and horizontal stabilization stops. Similarly, when you follow subjects moving
vertically, image stabilization only counteracts horizontal camera shake.
C
• To cancel image stabilization, set [IS Mode] to [Off] (= 65). In this case, an
IS icon is not displayed.
Downloaded from ManualsCamera.com Manuals
A variety of frames are displayed once the camera detects subjects you are
aiming the camera at.
• A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white frame
will remain on the screen.
• When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus and
image brightness are constantly adjusted (Servo AF).
Y
P
O
• Try shooting in [G] mode (= 54) if no frames are displayed, if
frames are not displayed around desired subjects, or if frames are
displayed on the background or similar areas.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
34
Cover
Common, Convenient Features
Still Images
Movies
Zooming In Closer on Subjects (Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 32x enlargement.
1 Move the zoom lever toward <i>.
zz
Hold the lever until zooming stops.
XX
Zooming stops at the largest possible zoom
factor (before the image becomes noticeably
grainy), which is then indicated on the screen.
Zoom Factor
2 Move the zoom lever toward
<i> again.
XX
The camera zooms in even closer on the
subject.
C
• Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The color of the zoom bar will change depending
on the zoom range.
-White range: optical zoom range where the image will not appear grainy.
-Yellow range: digital zoom range where the image is not noticeably
grainy (ZoomPlus).
-Blue range: digital zoom range where the image will appear grainy.
Because the blue range will not be available at some resolution
settings (= 39), the maximum zoom factor can be achieved by
following step
1. ManualsCamera.com Manuals
Downloaded
from
• Focal length when optical and digital zoom are combined is as follows (35mm
film equivalent).
28 – 896 mm (28 – 224 mm with optical zoom alone)
• To deactivate digital zoom, press the <n> button, choose [Digital Zoom]
on the [4] tab, and then choose [Off].
Still Images
Movies
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button.
Y
P
O
1 Configure the setting.
zz
Press the <m> button, choose [
]
in the menu, and then choose the []]
option (= 27).
XX
Once the setting is complete, []] is
displayed.
2 Shoot.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
zz
For Movies: Press the movie button.
35
Still Images
XX
Once you start the self-timer, the lamp
will blink and the camera will play a selftimer sound.
XX
Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
zz
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
zz
To restore the original setting, choose
[ ] in step 1.
Still Images
Movies
Using the Self-Timer to Avoid Camera Shake
This option delays shutter release until about two seconds after you have
pressed the shutter button. If the camera is unsteady while you are pressing
the shutter button, it will not affect your shot.
Configure the setting.
C
zz
Follow step 1 in “Using the Self-Timer”
(= 35) and choose [[].
XX
Once the setting is complete, [[] is
displayed.
zz
Follow step 2 in “Using the Self-Timer”
(= 35) to shoot.
Downloaded from ManualsCamera.com Manuals
Movies
Customizing the Self-Timer
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1 Choose [$].
zz
Following step 1 in “Using the Self-Timer”
(= 35), choose [$] and press the
<n> button.
2 Configure the setting.
Y
P
O
zz
Press the <o><p> buttons to choose
[Delay] or [Shots].
zz
Press the <q><r> buttons to choose a
value, and then press the <m> button.
XX
Once the setting is complete, [$] is
displayed.
zz
Follow step 2 in “Using the Self-Timer”
(= 35) to shoot.
• For movies shot using the self-timer, [Delay] represents the delay
before recording begins, but the [Shots] setting has no effect.
• When you specify multiple shots, image brightness and white balance are
determined by the first shot. More time is required between shots when the
flash fires or when you have specified to take many shots. Shooting will stop
automatically when the memory card becomes full.
• When a delay longer than two seconds is specified, two seconds before the
shot, the lamp blinking and self-timer sound will speed up. (The lamp will
remain lit in case the flash fires.)
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
36
Still Images
Deactivating the Flash
Still Images
Adding a Date Stamp
Prepare the camera for shooting without the flash as follows.
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct (= 13).
Configure the setting.
zz
Press the <r> button, press the <q><r>
buttons to choose [!], and then press
the <m> button.
XX
Once the setting is complete, [!] is
displayed.
zz
To restore the original setting, repeat this
process but choose [ ].
• If a flashing [ ] icon is displayed when you press the shutter button
halfway in low-light conditions, mount the camera on a tripod or take
other measures to keep it still.
C
1 Configure the setting.
zz
Press the <n> button, choose
] on the [4] tab, and
[Date Stamp
then choose the desired option (= 28).
XX
Once the setting is complete, [ ] is
displayed.
Y
P
O
2 Shoot.
XX
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
zz
To restore the original setting, choose
[Off] in step 1.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Date stamps cannot be edited or removed.
Downloaded from ManualsCamera.com Manuals
37
• Shots taken without adding a date stamp can be printed with one as follows.
However, adding a date stamp this way to images that already have one may
cause it to be printed twice.
-Use the included software to print
For details, refer to the Software Guide (= 18).
-Print using printer functions (= 117)
-Use camera DPOF print settings (= 121) to print
Cover
Image Customization Features
Preliminary Notes and
Legal Information
Still Images
Changing the Aspect Ratio
Change the image aspect ratio (ratio of width to height) as follows.
Configure the setting.
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 27).
XX
Once the setting is complete, the screen
aspect ratio will be updated.
zz
To restore the original setting, repeat this
process but choose [ ].
C
Y
P
O
Same aspect ratio as widescreen HDTVs.
Same aspect ratio as 35mm film, used for printing images at 5 x 7-inch or
postcard sizes.
Native aspect ratio of the camera screen, also used for display on standarddefinition televisions or similar display devices, or for printing images at 3.5 x
5-inch or A-series sizes.
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Square aspect ratio.
Downloaded from ManualsCamera.com Manuals
38
Still Images
Changing Image Resolution (Size)
Red-Eye Correction
Choose from 4 levels of image resolution, as follows. For guidelines on
how many shots at each resolution setting can fit on a memory card, see
Number of 4:3 Shots per Memory Card (= 141).
Configure the setting.
] in
the menu, and choose the desired option
(= 27).
XX
The option you configured is now
displayed.
zz
To restore the original setting, repeat this
process but choose [ ].
C
Guidelines for Choosing Resolution Based on Paper
Size (for 4:3 Images)
zz
[ ]: For e-mailing images.
A3 – A5 (11.7 x
16.5 – 5.8 x 8.3 in.)
5 x 7 in.
Postcard
3.5 x 5 in.
Downloaded from ManualsCamera.com Manuals
Red-eye that occurs in the flash photography can be automatically
corrected as follows.
1 Access the [Flash Settings]
screen.
zz
Press the <m> button, choose [
A2 (16.5 x 23.4 in.)
Still Images
zz
Press the <n> button, choose [Flash
Y
P
O
Settings] on the [4] tab, and then press
the <m> button (= 28).
2 Configure the setting.
zz
Choose [Red-Eye Corr.], and then
choose [On] (= 28).
XX
Once the setting is complete, [R] is
displayed.
zz
To restore the original setting, repeat this
process but choose [Off].
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Red-eye correction may be applied to image areas other than eyes (if
the camera misinterprets red eye makeup as red pupils, for example).
• You can also correct existing images (= 81).
• You can also access the screen in step 2 by pressing the <r> button and then
the <n> button.
39
Movies
Changing Movie Image Quality
2 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
see Recording Time per Memory Card (= 142).
Configure the setting.
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 27).
XX
The option you configured is now
displayed.
zz
To restore the original setting, repeat this
process but choose [ ].
Image
Quality
Resolution
Frame Rate
Details
C
1280 x 720
25 fps
For shooting in HD
640 x 480
30 fps
For shooting in standard
definition
Cover
Helpful Shooting Features
Still Images
Preliminary Notes and
Legal Information
Movies
Displaying Grid Lines
Grid lines can be displayed on the screen for vertical and horizontal
reference while shooting.
Configure the setting.
Y
P
O
zz
Press the <n> button, choose
[Grid Lines] on the [4] tab, and then
choose [On] (= 28).
XX
Once the setting is complete, grid lines
are displayed on the screen.
zz
To restore the original setting, repeat this
process but choose [Off].
• Grid lines are not recorded in your shots.
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• In [ ] mode, black bars displayed on the top and bottom edges of the screen
indicate image areas not recorded.
Downloaded from ManualsCamera.com Manuals
40
Still Images
Magnifying the Area in Focus
Checking for Closed Eyes
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
1 Configure the setting.
[ ] is displayed when the camera detects that people may have closed
their eyes.
1 Configure the setting.
zz
Press the <n> button, choose [AFPoint Zoom] on the [4] tab, and then
choose [On] (= 28).
2 Check the focus.
Still Images
C
zz
Press the shutter button halfway. The
face detected as the main subject is now
magnified.
zz
To restore the original setting, choose
[Off] in step 1.
• The area in focus will not be magnified when you press the shutter
button halfway if a face was not detected, if the person is too close
to the camera and their face is too large for the screen, or if the
camera detects subject movement.
zz
Press the <n> button, choose [Blink
Y
P
O
Detection] on the [4] tab, and then
choose [On] (= 28).
2 Shoot.
XX
[ ] flashes when the camera detects a
person whose eyes are closed.
zz
To restore the original setting, choose
[Off] in step 1.
• When you have specified multiple shots in [$] mode, this function is only
available for the final shot.
• A frame is displayed around people whose eyes are closed when you have
selected [2 sec.], [4 sec.], [8 sec.], or [Hold] in [Display Time] (= 43).
• The frame is not displayed when [Display Time] is set to [Quick] (= 43).
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• The display will not magnify when using the digital zoom (= 35) or Tracking
AF (= 61).
Downloaded from ManualsCamera.com Manuals
41
Customizing Camera Operation
Still Images
Customize shooting functions on the [4] tab of the menu as follows.
For instructions on menu functions, see MENU Menu (= 28).
Still Images
Deactivating the AF Assist Beam
You can deactivate the lamp that normally lights up to help you focus when
you press the shutter button halfway in low-light conditions.
Configure the setting.
zz
Press the <n> button, choose
[AF-assist Beam] on the [4] tab, and
then choose [Off] (= 28).
zz
To restore the original setting, repeat this
process but choose [On].
C
Downloaded from ManualsCamera.com Manuals
Deactivating the Red-Eye Reduction Lamp
You can deactivate the red-eye reduction lamp that lights up to reduce redeye when the flash is used in low-light shots.
1 Access the [Flash Settings]
screen.
zz
Press the <n> button, choose
Y
P
O
[Flash Settings] on the [4] tab, and then
press the <m> button (= 28).
2 Configure the setting.
zz
Choose [Red-Eye Lamp], and then
choose [Off] (= 28).
zz
To restore the original setting, repeat this
process but choose [On].
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
42
Still Images
Changing the Image Display Style After Shots
Still Images
Changing the Screen Displayed After Shots
1 Set [Display Time] to [2 sec.],
You can change how long images are displayed and what information is
displayed immediately after shooting.
[4 sec.], [8 sec.], or [Hold]
(= 43).
2 Configure the setting.
Changing the Image Display Period After Shots
1 Access the [Review image after
shooting] screen.
zz
Press the <n> button, choose
[Review image after shooting] on the [4]
tab, and then press the <m> button.
2 Configure the setting.
zz
Press the <o><p> buttons to choose
[Display Time]. Press the <q><r>
buttons to choose the desired option
(= 28).
zz
To restore the original setting, repeat this
process but choose [Quick].
Quick
Displays images only until you can shoot again.
C
2 sec., 4 sec., Displays images for the specified time. Even while the shot is displayed,
8 sec.
you can take another shot by pressing the shutter button halfway again.
Hold
Displays images until you press the shutter button halfway.
Off
No image display after shots.
Downloaded from ManualsCamera.com Manuals
zz
Press the <o><p> buttons to choose
[Display Info]. Press the <q><r> buttons
to choose the desired option (= 28).
zz
To restore the original setting, repeat this
process but choose [Off].
Y
P
O
Off
Displays only the image.
Detailed
Displays shooting details (= 132).
• When [Display Time] is set to [Off] or [Quick] (= 43), [Display Info] is set to
[Off] and cannot be changed.
• By pressing the <p> button while an image is displayed after shooting, you
can switch the display information. Note that the settings of [Display Info] on
the [4] tab cannot be changed. By pressing the <m> button, you can do the
following operations.
-Protect (= 72)
-Favorites (= 77)
-Erase (= 74)
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
43
Cover
Preliminary Notes and
Legal Information
4
Downloaded from ManualsCamera.com Manuals
3
Other Shooting Modes
Y
P
O
Shoot more effectively in various scenes, and take shots
enhanced with unique image effects or captured using
special functions
C
Specific Scenes.........................45
Applying Special Effects..........46
Special Modes for Other
Purposes..................................50
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
44
Cover
Specific Scenes
Still Images
Movies
P Shoot with snowy backgrounds
(Snow)
Choose a mode matching the shooting scene, and the camera will
automatically configure the settings for optimal shots.
zz
Bright, natural-colored shots of people
1 Enter <4> mode.
against snowy backgrounds.
zz
Press the <m> button, choose [G] in the
menu, and then choose a shooting mode
(= 27).
3 Shoot.
Still Images
C
Movies
I Shoot portraits (Portrait)
zz
Take shots of people with a softening
effect.
Y
P
O
Movies
t Shoot fireworks (Fireworks)
2 Choose a shooting mode.
zz
Vivid shots of fireworks.
• In [t] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to hold the
camera still (= 65).
• [
] mode resolution is [
Contents: Basic Operations
Basic Guide
Advanced Guide
zz
Set the mode switch to <4>.
Still Images
Preliminary Notes and
Legal Information
] (2304 x 1728) and cannot be changed.
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Images
Shoot under low light (Low
Light)
zz
Shoot with minimal camera shake and
subject blur even in low-light conditions.
Downloaded from ManualsCamera.com Manuals
45
Applying Special Effects
Still Images
Shooting with a Fish-Eye Lens Effect
(Fish-eye Effect)
Add a variety of effects to images when shooting.
1 Choose a shooting mode.
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 45) to choose a shooting mode.
2 Shoot.
Shoot with the distorting effect of a fish-eye lens.
Movies
Shoot in vivid colors (Super
Vivid)
zz
Shots in rich, vivid colors.
Still Images
C
Movies
Posterized shots (Poster Effect)
zz
Shots that resemble an old poster or
illustration.
Y
P
O
Contents: Basic Operations
Advanced Guide
zz
Follow steps 1 – 2 in “Specific Scenes”
Still Images
Preliminary Notes and
Legal Information
Basic Guide
1 Choose [ ].
(= 45) and choose [
Cover
].
2 Choose an effect level.
zz
Press the <p> button, press the
<q><r> buttons to choose an effect
level, and then press the <m> button.
XX
A preview is shown of how your shot will
look with the effect applied.
3 Shoot.
• Try taking some test shots first, to make sure you obtain the desired
results.
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• In [ ] and [ ] modes, try taking some test shots first, to make sure
you obtain the desired results.
Downloaded from ManualsCamera.com Manuals
46
Still Images
Movies
Shots Resembling Miniature Models
(Miniature Effect)
Speed
Creates the effect of a miniature model, by blurring image areas above and
below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and objects
in the scene will move quickly during playback. Note that sound is not recorded.
1 Choose [ ].
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 45) and choose [ ].
XX
A white frame is displayed, indicating the
image area that will not be blurred.
2 Choose the area to keep in
focus.
C
zz
Press the <p> button.
zz
Move the zoom lever to resize the frame,
and press the <o><p> buttons to move
it.
3 For movies, choose the movie
playback speed.
Cover
Playback Speed and Estimated Playback Time (for One-Minute Clips)
Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
• The zoom is not available when shooting movies. Be sure to set the
zoom before shooting.
• Try taking some test shots first, to make sure you obtain the desired
results.
Y
P
O
• To switch the orientation of the frame to vertical, press the <q><r> buttons
in step 2. To move the frame, press the <q><r> buttons again. To return the
frame to horizontal orientation, press the <o><p> buttons.
• Holding the camera vertically will change the orientation of the frame.
• Movie image quality is [ ] at an aspect ratio of [ ] and [ ] at an aspect
ratio of [ ] (= 38). These quality settings cannot be changed.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Press the <n> button, and then press
the <q><r> buttons to choose the speed.
4 Return to the shooting screen
and shoot.
zz
Press the <n> button to return to the
shooting screen, and
then shoot.
Downloaded from ManualsCamera.com
Manuals
47
Still Images
Shooting with a Toy Camera Effect
(Toy Camera Effect)
Still Images
Shooting in Monochrome
Shoot images in black and white, sepia, or blue and white.
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 45) and choose [
zz
Follow steps 1 – 2 in “Specific Scenes”
].
zz
Press the <p> button, press the
<q><r> buttons to choose a color tone,
and then press the <m> button.
XX
A preview is shown of how your shot will
look with the effect applied.
3 Shoot.
Standard
Shots resemble toy camera images.
Warm
Images have a warmer tone than with [Standard].
Cool
Images have a cooler tone than with [Standard].
C
• Try taking some test shots first, to make sure you obtain the desired
results.
Downloaded from ManualsCamera.com Manuals
].
2 Choose a color tone.
Y
P
O
zz
Press the <p> button, press the
2 Choose a color tone.
<q><r> buttons to choose a color tone,
and then press the <m> button.
XX
A preview is shown of how your shot will
look with the effect applied.
3 Shoot.
B/W
Black and white shots.
Sepia
Sepia tone shots.
Blue
Blue and white shots.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
1 Choose [ ].
1 Choose [ ].
(= 45) and choose [
Movies
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
48
Still Images
Movies
Shooting with Color Accent
Choose a single image color to keep and change other colors to black and white.
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 45) and choose [T].
2 Access the setting screen.
zz
Press the <p> button.
XX
The original image and the Color Accent
image are displayed one after another.
XX
By default, green is the color that will be
kept.
3 Specify the color.
zz
Position the center frame over the color
C
to keep, and then press the <q> button.
XX
The specified color is recorded.
4 Specify the range of colors to
keep.
zz
Press the <o><p> buttons to adjust the
range.
zz
To keep only your specified color, choose
a large negative value. To keep colors
similar to your specified color as well,
choose a large positive value.
zz
Press the <m> button to return to the
shooting screen.
Downloaded from ManualsCamera.com
Manuals
5 Shoot.
• Using the flash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.
Still Images
Movies
Shooting with Color Swap
1 Choose [T].
Recorded Color
Cover
You can replace one image color with another before shooting. Note that
only one color can be replaced.
Y
P
O
1 Choose [Y].
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 45) and choose [Y].
2 Access the setting screen.
zz
Press the <p> button.
XX
The original image and the Color Swap
image are displayed one after another.
XX
By default, green will be replaced with
gray.
3 Specify the color to replace.
zz
Position the center frame over the color
to replace, and then press the <q>
button.
XX
The specified color is recorded.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
49
Special Modes for Other Purposes
4 Specify the new color.
zz
Position the center frame over the new
color, and then press the <r> button.
XX
The specified color is recorded.
5 Specify the range of colors to
replace.
zz
Press the <o><p> buttons to adjust the
range.
zz
To replace only your specified color,
choose a large negative value. To replace
colors similar to your specified color as
well, choose a large positive value.
zz
Press the <m> button to return to the
shooting screen.
6 Shoot.
C
• Using the flash in this mode may cause unexpected results.
• In some shooting scenes, images may look grainy and colors may
not look as expected.
Still Images
Auto Shooting After Face Detection
(Smart Shutter)
Auto Shooting After Smile Detection
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
Y
P
O
1 Choose [ ].
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 45) and choose [ ], and then
press the <p> button.
zz
Press the <q><r> buttons to choose
[ ], and then press the <m> button.
XX
The camera now enters shooting standby
mode, and [Smile Detection on] is displayed.
2 Aim the camera at a person.
zz
Each time the camera detects a smile, it
will shoot after the lamp lights up.
zz
To pause smile detection, press the <q>
button. Press the <q> button again to
resume detection.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Switch to another mode when you finish shooting, or the camera will
continue shooting each time a smile is detected.
Downloaded from ManualsCamera.com Manuals
• You can also shoot as usual by pressing the shutter button.
• The camera can detect smiles more easily when subjects face the camera and
open their mouth wide enough so that teeth are visible.
50
• To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (= 41) is only available for the final shot.
Still Images
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1 Choose [ ].
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 45) and choose [ ], and then
press the <p> button.
zz
Press the <q><r> buttons to choose
[ ], and then press the <m> button.
2 Compose the shot and press
the shutter button halfway.
C
zz
Make sure a green frame is displayed
around the face of the person who will
wink.
3 Press the shutter button all the
way down.
XX
The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
XX
The lamp blinks and the self-timer sound
is played.
Downloaded from ManualsCamera.com Manuals
4 Face the camera and wink.
XX
The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
zz
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
• Closing and opening both eyes at once will also be detected as a wink.
• If winking is not detected, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (= 41) is only available for the final shot.
• If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
Y
P
O
Still Images
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(= 61). This is useful when including yourself in group photos or similar
shots.
1 Choose [ ].
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 45) and choose [ ], and then
press the <p> button.
zz
Press the <q><r> buttons to choose
[ ], and then press the <m> button.
51
2 Compose the shot and press
the shutter button halfway.
zz
Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3 Press the shutter button all the
way down.
XX
The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
XX
The lamp blinks and the self-timer sound
is played.
4 Join the subjects in the
shooting area and look at the
camera.
XX
After the camera detects a new face, the
C
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
zz
To cancel shooting after you have
triggered the self-timer, press the
<n> button.
• Even if your face is not detected after you join the others in the shooting area,
the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (= 41) is only available for the final shot.
Downloaded from ManualsCamera.com Manuals
Still Images
Shooting Long Exposures (Long Shutter)
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1 Choose [N].
zz
Follow steps 1 – 2 in “Specific Scenes”
Y
P
O
(= 45) and choose [N].
2 Choose the shutter speed.
zz
Press the <o> button, press the
<q><r> buttons to choose the shutter
speed, and then press the <m> button.
3 Check the exposure.
zz
Press the shutter button halfway to view
the exposure for your selected shutter
speed.
4 Shoot.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your shots.
• With shutter speeds of 1.3 seconds or slower, there will be a delay
before you can shoot again, as the camera processes images to
reduce noise.
• Set [IS Mode] to [Off] when using a tripod or other means to hold the
camera still (= 65).
52
• If the flash fires, your shot may be overexposed. In this case, set the flash to
[!] and shoot again.
Still Images
5 Use the software to combine the
images.
zz
For instructions on merging images, refer
to the Software Guide (= 18).
Shooting Stitch Assist Images
Shoot a large subject by taking multiple shots at various positions, and then
use the software (= 18) to combine them into a panorama.
1 Choose [x] or [v].
zz
Follow steps 1 – 2 in “Specific Scenes”
(= 45) and choose [x] or [v].
2 Take the first shot.
XX
The first shot will determine the exposure
and white balance.
3 Take additional shots.
C
zz
Compose the second shot so that it
partially overlaps the image area of the
first shot.
zz
Minor misalignment of overlapping
portions will be corrected automatically
when the images are combined.
zz
You can take up to 26 shots, the same
way you took the second shot.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
Y
P
O
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4 Finish shooting.
zz
Press the <m> button.
Downloaded from ManualsCamera.com Manuals
53
Cover
Preliminary Notes and
Legal Information
4
Downloaded from ManualsCamera.com Manuals
4
Contents: Basic Operations
Basic Guide
Advanced Guide
P Mode
Y
P
O
More discerning shots, in your preferred shooting style
C
• Instructions in this chapter apply to the camera in [G] mode, with the
mode switch set to <4>.
• [G]: Program AE; AE: Auto Exposure
• Before using a function introduced in this chapter in modes other than
[G], make sure the function is available in that mode (= 134 – 138).
Shooting in Program AE ([P] Mode).................................55
Image Brightness (Exposure Compensation)......55
Color and Continuous Shooting...................................57
Shooting Range and Focusing...................................60
Flash...........................................64
Other Settings...........................65
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
54
Still Images
Movies
Shooting in Program AE ([P] Mode)
You can customize many function settings to suit your preferred shooting
style.
Image Brightness (Exposure Compensation)
Still Images
Movies
Adjusting Image Brightness (Exposure Compensation)
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –2 to +2.
1 Enter [G] mode.
zz
Follow steps 1 – 2 in “Specific Scenes”
zz
Press the <o> button. As you watch
(= 45) and choose [G].
2 Customize the settings as
desired (= 55 – 65), and
then shoot.
• If adequate exposure cannot be obtained when you press the shutter button
halfway, shutter speeds and aperture values are displayed in orange. In this
case, try adjusting the ISO speed (= 56) or activating the flash (if subjects
are dark, = 64), which may enable adequate exposure.
• Movies can be recorded in [G] mode as well, by pressing the movie button.
However, some <H> and <n> settings may be automatically
adjusted for movie recording.
• For details on the shooting range in [G] mode, see Shooting Range (= 142).
C
the screen, press the <q><r> buttons
to adjust brightness, and then press the
<o> button again when finished.
XX
The correction level you specified is now
displayed.
zz
When shooting movies, shoot with the
exposure compensation bar displayed.
zz
When shooting still images, press the
<m> button to display the set exposure
compensation amount, and then shoot.
Y
P
O
Exposure Compensation Bar
• You can also shoot still images with exposure compensation bar displayed.
• While recording a movie, [&] is displayed, and the exposure is locked.
Still Images
Locking Image Brightness/Exposure (AE Lock)
Before shooting, you can lock the exposure, or you can specify focus and
exposure separately.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
1 Deactivate the flash (= 37).
2 Lock the exposure.
zz
Aim the camera at the subject to shoot with
Downloaded from ManualsCamera.com Manuals
the exposure locked. With the shutter button
pressed halfway, press the <o> button.
55
XX
[&] is displayed, and the exposure is
Still Images
locked.
Changing the ISO Speed
zz
To unlock AE, release the shutter button
and press the <o> button again. In this
case, [&] is no longer displayed.
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 27).
XX
The option you configured is now
displayed.
3 Compose the shot and shoot.
• AE: Auto Exposure
Still Images
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 2 7).
XX
The option you configured is now
displayed.
Evaluative
C
For typical shooting conditions, including backlit shots.
Automatically adjusts exposure to match the shooting conditions.
Determines the average brightness of light across the entire
Center
image area, calculated by treating brightness in the central area
Weighted Avg.
as more important.
Spot
Y
P
O
Automatically adjusts the ISO speed to suit the shooting mode and
conditions.
 
 
 
Low For shooting outdoors in fair weather.
For shooting in cloudy conditions, or at twilight.
High For shooting night scenes, or in dark rooms.
• To view the automatically set ISO speed when the camera is set to [ ], press
the shutter button halfway.
• Although choosing a lower ISO speed may reduce image graininess, there
may be a greater risk of subject blurriness in some shooting conditions.
• Choosing a higher ISO speed will increase shutter speed, which may reduce
subject blurriness and increase the flash range. However, shots may look
grainy.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Metering restricted to within the [ ] (Spot AE Point frame),
displayed in the center of the screen.
Downloaded from ManualsCamera.com Manuals
56
Still Images
Correcting Image Brightness (i-Contrast)
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness. Insufficient overall image contrast can also be automatically
corrected before shooting to make subjects stand out better.
Still Images
• Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
• You can also correct existing images (= 80).
Downloaded from ManualsCamera.com Manuals
C
Preliminary Notes and
Legal Information
Movies
Adjusting White Balance
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
zz
Press the <n> button, choose
[i-Contrast] on the [4] tab, and then
choose [Auto] (= 28).
XX
Once the setting is complete, [@] is
displayed.
Cover
Color and Continuous Shooting
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 27).
XX
The option you configured is now
displayed.
Y
P
O
Auto
Automatically sets the optimal white balance for the shooting
conditions.
Day Light
For shooting outdoors in fair weather.
Cloudy
For shooting in cloudy conditions, in the shade, or at twilight.
Tungsten
For shooting under ordinary incandescent (tungsten) lighting
and similarly colored fluorescent lighting.
Fluorescent
For shooting under warm-white (or similarly colored) or coolwhite fluorescent lighting.
Fluorescent H
For shooting under daylight fluorescent and similarly colored
fluorescent lighting.
Custom
For manually setting a custom white balance (= 58).
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
57
Still Images
Movies
Still Images
Changing Image Color Tones (My Colors)
Custom White Balance
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
Change image color tones as desired, such as converting images to sepia
or black and white.
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 27).
XX
The option you configured is now
displayed.
zz
Follow the steps in “Adjusting White
Balance” (= 57) to choose [ ].
zz
Aim the camera at a plain white subject,
so that the entire screen is white. Press
the <n> button.
XX
The tint of the screen changes once the
white balance data has been recorded.
• Colors may look unnatural if you change camera settings after
recording white balance data.
C
Downloaded from ManualsCamera.com Manuals
Movies
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
Lighter Skin Tone Lightens skin tones.
1
2
3
4
5
6
7
8
9
Darker Skin Tone Darkens skin tones.
Index
Y
P
O
My Colors Off
―
Vivid
Emphasizes contrast and color saturation, making images sharper.
Neutral
Tones down contrast and color saturation for subdued images.
Sepia
Creates sepia tone images.
B/W
Creates black and white images.
Positive Film
Combines the effects of Vivid Blue, Vivid Green, and Vivid
Red to produce intense yet natural-looking colors resembling
images on positive film.
Vivid Blue
Emphasizes blues in images. Makes the sky, ocean, and other
blue subjects more vivid.
Vivid Green
Emphasizes greens in images. Makes mountains, foliage, and
other green subjects more vivid.
Vivid Red
Emphasizes reds in images. Makes red subjects more vivid.
Custom Color
Adjust contrast, sharpness, color saturation, and other
qualities as desired (= 59).
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
58
• White balance (= 57) cannot be set in [ ] or [ ] modes.
• With [ ] and [ ] modes, colors other than people’s skin tone may
be modified. These settings may not produce the expected results
with some skin tones.
Still Images
Movies
Custom Color
Choose the desired level of image contrast, sharpness, color saturation,
red, green, blue, and skin tones in a range of 1 – 5.
1 Access the setting screen.
zz
Follow the steps in “Changing Image
Color Tones (My Colors)” (= 58) to
choose [ ], and then press the <n>
button.
2 Configure the setting.
C
zz
Press the <o><p> buttons to choose
an option, and then specify the value by
pressing the <q><r> buttons.
zz
For stronger/more intense effects (or
darker skin tones), adjust the value to
the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to
the left.
zz
Press the <n> button to complete
the setting.
Downloaded from ManualsCamera.com Manuals
Still Images
Continuous Shooting
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see Continuous Shooting
Speed (= 142).
1 Configure the setting.
zz
Press the <m> button, choose
[ ] in the menu, and then choose [W]
(= 27).
XX
Once the setting is complete, [W] is
displayed.
Y
P
O
2 Shoot.
XX
Hold the shutter button all the way down
to shoot continuously.
• Cannot be used with the self-timer (= 35) or [Blink Detection]
(= 41).
• During continuous shooting, focus and exposure are locked at the
position/level determined when you pressed the shutter button
halfway.
• Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
• As more shots are taken, shooting may slow down.
• Shooting may slow down if the flash fires.
• Continuous shooting is faster in [
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
] mode (= 45).
59
Shooting Range and Focusing
Still Images
Still Images
Shooting Close-ups (Macro)
To restrict the focus to subjects at close range, set the camera to [e]. For
details on the focusing range, see Shooting Range (= 142).
zz
Press the <q> button, press the <q><r>
buttons to choose [e], and then press
the <m> button.
XX
Once the setting is complete, [e] is
displayed.
Shooting Distant Subjects (Infinity)
To restrict the focus to distant subjects, set the camera to [u]. For details
on the focusing range, see Shooting Range (= 142).
zz
Press the <q> button, press the <q><r>
buttons to choose [u], and then press
the <m> button.
XX
Once the setting is complete, [u] is
displayed.
Y
P
O
Still Images
Movies
Digital Tele-Converter
• If the flash fires, vignetting may occur.
• In the yellow bar display area below the zoom bar, [e] will turn gray
and the camera will not focus.
C
• To prevent camera shake, try mounting the camera on a tripod and shooting
with the camera set to [[] (= 36).
The focal length of the lens can be increased by approximately 1.6x or 2.0x.
This can reduce camera shake because the shutter speed is faster than it would
be if you zoomed (including using digital zoom) in to the same zoom factor.
zz
Press the <n> button, choose
[Digital Zoom] on the [4] tab, and then
choose the desired option (= 28).
XX
The view is enlarged and the zoom factor
is displayed on the screen.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• The digital tele-converter cannot be used with digital zoom
(= 35) and AF-point zoom (= 41).
Downloaded from ManualsCamera.com Manuals
• The respective focal lengths when using [1.6x] and [2.0x] are 44.8 – 358.4 mm
and 56.0 – 448.0 mm (35mm film equivalent).
60
• The shutter speed may be equivalent when you move the zoom lever all the
way toward <i> for maximum telephoto, and when you zoom in to enlarge
the subject to the same size following step 2 in “Zooming In Closer on Subjects
(Digital Zoom)” (= 35).
Still Images
Movies
Changing the AF Frame Mode
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
zz
Press the <n> button, choose [AF
Frame] on the [4] tab, and then choose
the desired option (= 28).
Cover
• If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the
areas in focus when you press the shutter button halfway.
• If faces are not detected when Servo AF (= 62) is set to [On], the
AF frame is displayed in the center of the screen when you press
the shutter button halfway.
• Examples of faces that cannot be detected:
-Subjects that are distant or extremely close
-Subjects that are dark or light
-Faces in profile, at an angle, or partly hidden
• The camera may misinterpret non-human subjects as faces.
• No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Y
P
O
Still Images
Choosing Subjects to Focus On (Tracking AF)
Still Images
Face AiAF
Movies
C
• Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
• After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other detected
faces.
• When the camera detects movement, frames will follow moving subjects,
within a certain range.
• After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
Downloaded from ManualsCamera.com Manuals
Shoot after choosing a subject to focus on as follows.
1 Choose [Tracking AF].
zz
Follow the steps in “Changing the AF
Frame Mode” (= 61) to choose
[Tracking AF].
XX
[ ] is displayed in the center of the
screen.
2 Choose a subject to focus on.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Aim the camera so that [
] is on the
desired subject, and then press the <q>
button.
61
XX
When the subject is detected, the camera
beeps and [ ] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
XX
If no subject is detected, [ ] is
displayed.
zz
To cancel tracking, press the <q> button
again.
3 Shoot.
zz
Press the shutter button halfway.
[ ] changes to a blue [ ], which
follows the subject as the camera
continues to adjust the focus and
exposure (Servo AF) (= 62).
zz
Press the shutter button all the way down
to shoot.
XX
Even after your shot, [ ] is still
displayed and the camera continues to
track the subject.
C
• [Servo AF] (= 62) is set to [On] and cannot be changed.
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
• [AF-Point Zoom] on the [4] tab is not available.
• [e] and [u] are not available.
• The camera can detect subjects even if you press the shutter button halfway
without pressing the <q> button. After your shot, [ ] is displayed in the
center of the screen.
Downloaded from ManualsCamera.com Manuals
Still Images
Movies
Center
One AF frame is displayed in the center. Effective for reliable focusing.
• A yellow AF frame is displayed with [ ] if the camera cannot focus
when you press the shutter button halfway. Note that AF-point
zooming (= 41) is not possible.
• To reduce the AF frame size, press the <n> button and set
[AF Frame Size] on the [4] tab to [Small] (= 28).
• The AF frame size is set to [Normal] when you use the digital zoom (= 35)
or digital tele-converter (= 60).
• To compose shots so that subjects are positioned at the edge or in a corner,
first aim the camera to capture the subject in an AF frame, and then hold
the shutter button halfway down. As you continue to hold the shutter button
halfway, recompose the shot as desired, and then press the shutter button all
the way down (Focus Lock).
Y
P
O
Still Images
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
1 Configure the setting.
zz
Press the <n> button, choose
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
[Servo AF] on the [4] tab, and then
choose [On] (= 28).
2 Focus.
zz
The focus and exposure are maintained
where the blue AF frame is displayed while
you are pressing the shutter button halfway.
62
• Focusing may not be possible in some shooting conditions.
• In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specified AF
frame mode.
• If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.
• AF lock shooting is not available.
• [AF-Point Zoom] on the [4] tab is not available.
• Not available when using the self-timer (= 35).
Still Images
Movies
Changing the Focus Setting
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed. Instead,
you can limit camera focusing to the moment you press the shutter button
halfway.
C
zz
Press the <n> button, choose
[Continuous AF] on the [4] tab, and then
choose [Off] (= 28).
Helps avoid missing sudden photo
opportunities, because the camera
On
constantly focuses on subjects until you
press the shutter button halfway.
Off
Still Images
Movies
Shooting with the AF Lock
The focus can be locked. After you lock the focus, the focal position will not
change even when you release your finger from the shutter button.
1 Lock the focus.
zz
With the shutter button pressed halfway,
Y
P
O
press the <q> button.
XX
The focus is now locked, and [%] is
displayed.
zz
To unlock the focus, release the shutter
button and press the <q> button again. In
this case, [%] is no longer displayed.
2 Compose the shot and shoot.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Conserves battery power, because the
camera does not focus constantly.
Downloaded from ManualsCamera.com Manuals
63
Flash
Cover
2 Shoot.
zz
Even after the flash fires, ensure that
Still Images
the main subject does not move until the
shutter sound is finished playing.
Activating Flash
You can have the flash fire for each shot. For details on the flash range, see
Flash Range (= 142).
Configure the setting.
zz
Press the <r> button, press the <q><r>
buttons to choose [h], and then press the
<m> button.
XX
Once the setting is complete, [h] is
displayed.
Still Images
Shooting with Slow Synchro
C
With this option, the flash fires to increase the brightness of the main
subject (such as people) while the camera shoots at a slow shutter speed to
increase the brightness of the background that is out of the flash range.
For details on the flash range, see Flash Range (= 142).
1 Configure the setting.
• Mount the camera on a tripod or take other measures to keep it still
and prevent camera shake. Additionally, you should set [IS Mode]
to [Off] when using a tripod or other means to hold the camera still
(= 65).
Y
P
O
Shooting with the FE Lock
Just as with the AE lock (= 55), you can lock the exposure for the flash
shots.
1 Set the flash to [h] (= 64).
2 Lock the flash exposure.
zz
Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<o> button.
XX
The flash fires, and when [(] is
displayed, the flash output level is
retained.
zz
To unlock FE, release the shutter button
and press the <o> button again. In this
case, [(] is no longer displayed.
zz
Press the <r> button, press the <q><r>
buttons to choose [Z], and then press
the <m> button.
XX
Once the setting is complete, [Z] is
displayed.
Downloaded from ManualsCamera.com Manuals
Still Images
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3 Compose the shot and shoot.
• FE: Flash Exposure
64
Cover
Other Settings
Still Images
Changing the Compression Ratio
(Image Quality)
• If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
Configure the setting.
zz
Press the <m> button, choose [
] in
the menu, and choose the desired option
(= 27).
Changing the IS Mode Settings
Contents: Basic Operations
Basic Guide
Advanced Guide
Choose from two compression ratios, as follows:
(Super Fine),
(Fine).
For guidelines on how many shots at each compression ratio can fit on a
memory card, see Number of 4:3 Shots per Memory Card (= 141).
Still Images
Preliminary Notes and
Legal Information
C
Movies
zz
Press the <n> button, choose [IS
Mode] on the [4] tab, and then choose
the desired option (= 28).
Y
P
O
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Optimal image stabilization for the
Continuous shooting conditions is automatically
applied (Intelligent IS) (= 34).
Shoot Only*
Image stabilization is active only at
the moment of shooting.
Off
Deactivates image stabilization.
*The
setting is changed
to [Continuous]
for movie recording.Manuals
Downloaded
from
ManualsCamera.com
65
Cover
Preliminary Notes and
Legal Information
4
Downloaded from ManualsCamera.com Manuals
5
Contents: Basic Operations
Basic Guide
Advanced Guide
Playback Mode
Y
P
O
Have fun reviewing your shots, and browse or edit them
in many ways
• To prepare the camera for these operations, press the <1> button to
enter Playback mode.
C
• It may not be possible to play back or edit images that were
renamed or already edited on a computer, or images from other
cameras.
Viewing.......................................67
Browsing and Filtering Images......................................69
Image Viewing Options.............70
Protecting Images.....................72
Erasing Images..........................74
Rotating Images........................76
Image Categories......................77
Editing Still Images...................78
Editing Movies...........................81
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
66
Viewing
Still Images
Cover
Movies
zz
Movies are identified by a [
play movies, go to step 3.
] icon. To
Contents: Basic Operations
After shooting images or movies, you can view them on the screen as
follows.
Basic Guide
1 Enter Playback mode.
Advanced Guide
zz
Press the <1> button.
3 Play movies.
XX
Your last shot is displayed.
zz
To start playback, press the <m> button,
2 Browse through your images.
zz
To view the previous image, press the
<q> button. To view the next image,
press the <r> button.
C
zz
To access Scroll Display mode, press and
Downloaded from
Preliminary Notes and
Legal Information
hold the <q><r> buttons for at least one
second. In this mode, press the <q><r>
buttons to browse through images.
Images appear grainy at this time.
zz
To return to single-image display, press
the <m> button.
zz
To browse images grouped by shooting
date, press the <o><p> buttons in
ManualsCamera.com
Manuals
Scroll Display mode.
Y
P
O
press the <o><p> buttons to choose
[ ], and then press the <m> button
again.
4 Adjust the volume.
zz
Press the <o><p> buttons to adjust the
volume. Even after the volume indicator
disappears, you can adjust the volume by
pressing the <o><p> buttons.
Volume Indicator
5 Pause playback.
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
To pause or resume playback, press the
<m> button.
XX
After the movie is finished, [
displayed.
] is
67
• To switch to Shooting mode from Playback mode, press the shutter button
halfway.
• To deactivate Scroll Display, press the <n> button, choose [Scroll
Display] on the [1] tab, and then choose [Off].
• If you prefer to have the most recent shot displayed when you enter Playback
mode, press the <n> button, and on the [1] tab, choose [Resume] and
then [Last shot].
• To change the transition shown between images, press the <n> button,
choose [Transition] on the [1] tab, and then press the <q><r> buttons to
choose the effect.
Still Images
Movies
Switching Display Modes
Press the <p> button to view other information on the screen, or to hide
the information. For details on the information displayed, see “Playback
(Detailed Information Display)” (= 132).
No Information
Display
Simple
Information
Display
Detailed
Information Display
Still Images
Overexposure Warning (for Image Highlights)
Movies
Washed-out highlights in the image flash on the screen in detailed
information display (= 68).
Downloaded from ManualsCamera.com Manuals
C
Still Images
Movies
Histogram
High
zz
The graph in detailed information display
Low
Dark
Bright
Y
P
O
(= 68) is a histogram showing the
distribution of brightness in the image.
The horizontal axis represents the degree
of brightness, and the vertical axis, how
much of the image is at each level of
brightness. Viewing the histogram is a
way to check exposure.
Still Images
Movies
GPS Information Display
zz
Using a smartphone connected to the
camera via Wi-Fi (= 91), you can
geotag images on the camera, adding
information such as latitude, longitude,
and elevation. Geotagged images are
labeled with a [ ] icon in detailed
information display. Press the <o>
button to view the information recorded.
zz
Latitude, longitude, elevation, and UTC
(shooting date and time) are listed from
top to bottom.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• [---] is shown instead of numerical values for items not available on
your smartphone or items not recorded correctly.
• UTC: Coordinated Universal Time, essentially the same as Greenwich Mean
Time
68
Browsing and Filtering Images
Still Images
Still Images
Movies
Navigating Through Images in an Index
By displaying multiple images in an index, you can quickly find the images
you are looking for.
1 Display images in an index.
zz
Move the zoom lever toward <g> to
display images in an index. Moving the
lever again will increase the number of
images shown.
zz
To display fewer images, move the zoom
lever toward <k>. Fewer images are
shown each time you move the lever.
2 Choose an image.
C
zz
Press the <o><p><q><r> buttons to
choose an image.
XX
An orange frame is displayed around the
selected image.
zz
Press the <m> button to view the
selected image in single-image display.
Downloaded from ManualsCamera.com Manuals
Movies
Finding Images Matching Specified Conditions
Find desired images quickly on a memory card full of images by filtering
image display according to your specified conditions. You can also protect
(= 72) or delete (= 74) these images all at once.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
People
Displays images with detected faces.
Advanced Guide
Shot Date
Displays the images shot on a specific date.
Favorites
Displays images tagged as favorites (= 77).
Still image/Movie
Displays only still images or movies.
1
2
3
4
5
6
7
8
9
Y
P
O
1 Choose a search condition.
zz
Press the <m> button, choose
[ ] in the menu, and choose a condition
(= 27).
zz
When you have selected [ ] or [ ],
choose the condition by pressing the
<o><p><q><r> buttons on the screen
displayed, and then press the <m>
button.
2 View the filtered images.
zz
Images matching your conditions are
displayed in yellow frames. To view only
these images, press the <q><r> buttons.
zz
To cancel filtered display, choose [ ] in
step 1.
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• When the camera has found no corresponding images for some
conditions, those conditions will not be available.
69
• Options for viewing the images found (in step 2) include Navigating Through
Images in an Index (= 69), Viewing Slideshows (= 71), and Magnifying
Images (= 70). You can protect, erase, or print all images found or add
them to a photobook by choosing [Select All Images in Search] in Protecting
Images (= 72), Erasing All Images (= 75), Adding Images to the Print
List (DPOF) (= 121), or Adding Images to a Photobook (= 123).
• If you edit images and save them as new images (= 78 – 81), a message
is displayed, and the images that were found are no longer shown.
Cover
Image Viewing Options
Preliminary Notes and
Legal Information
Still Images
Magnifying Images
1 Magnify an image.
zz
Moving the zoom lever toward <k> will
zoom in and magnify the image, and
] is displayed. You can magnify
[
images up to about 10x by continuing to
hold the zoom lever.
zz
To zoom out, move the zoom lever
toward <g>. You can return to singleimage display by continuing to hold it.
Y
P
O
2 Move the display position and
C
Approximate Position
of Displayed Area
switch images as needed.
zz
To move the display position, press the
<o><p><q><r> buttons.
] is displayed, you can switch
] by pressing the <m> button.
to [
To switch to other images while zoomed,
press the <q><r> buttons. Press the
<m> button again to restore the original
setting.
zz
While [
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• You can return to single-image display from magnified display by pressing the
<n> button.
Downloaded from ManualsCamera.com Manuals
70
Still Images
Movies
Viewing Slideshows
Automatically play back images from a memory card as follows. Each
image is displayed for about three seconds.
Choose a slideshow transition and
start playback.
zz
Press the <m> button, choose [.] in
the menu, and choose the desired option
(= 27).
XX
The slideshow will start a few seconds
after [Loading image] is displayed.
zz
Press the <n> button to stop the
slideshow.
• The camera’s power-saving functions (= 25) are deactivated
during slideshows.
C
• To pause or resume slideshows, press the <m> button.
• You can switch to other images during playback by pressing the <q><r>
buttons. For fast-forward or fast-rewind, hold the <q><r> buttons down.
• In image search mode (= 69), only images matching search conditions are
played.
Downloaded from ManualsCamera.com Manuals
Cover
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions
between images and the display duration of each image.
1 Access the setting screen.
zz
Press the <n> button, and then
choose [Slideshow] on the [1] tab
(= 71).
2 Configure the settings.
Y
P
O
zz
Choose a menu item to configure, and
then choose the desired option (= 28).
zz
To start the slideshow with your settings,
choose [Start] and press the <m>
button.
zz
To return to the menu screen, press the
<n> button.
• [Play Time] cannot be modified when [Bubble] is chosen in [Effect].
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
71
Still Images
Auto Playback of Similar Images (Smart Shuffle)
Based on the current image, the camera offers four images similar to it that you
may wish to view. After you choose to view one of those images, the camera offers
four more images. This is an enjoyable way to play back images in an unexpected
order. Try this feature after you have taken many shots, in many kinds of scenes.
Protecting Images
[
] in the menu (= 27).
XX
Four candidate images are displayed.
Movies
Protect important images to prevent accidental erasure by the camera
(= 74).
zz
Press the <m> button, and then choose
[:] in the menu (= 27). [Protected]
is displayed.
zz
To cancel protection, repeat this process
and choose [:] again, and then press
the <m> button.
1 Choose Smart Shuffle.
zz
Press the <m> button, and then choose
Still Images
Y
P
O
• Protected images on a memory card will be erased if you format the
card (= 109, 110).
2 Choose an image.
zz
Press the <o><p><q><r> buttons to
choose the image you want to view next.
C
XX
Your chosen image is displayed in the
center, surrounded by the next four
candidate images.
zz
For full-screen display of the center image,
press the <m> button. To restore the original
display, press the <m> button again.
zz
Press the <n> button to restore
single-image display.
• Only still images shot with this camera are played back using Smart Shuffle.
• Smart Shuffle is not available in the following cases:
-There are less than 50 shots taken with this camera
-An unsupported image is currently displayed
-Images arefrom
shown
in filtered display (= 69)Manuals
Downloaded
ManualsCamera.com
• Protected images cannot be erased using the camera’s erasure function. To
erase them this way, first cancel protection.
Using the Menu
1 Access the setting screen.
zz
Press the <n> button and choose
[Protect] on the [1] tab (= 28).
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
72
2 Choose a selection method.
zz
Choose a menu item and a setting as
desired (= 28).
zz
To return to the menu screen, press the
1 Choose [Select Range].
zz
Following step 2 in “Using the Menu”
(= 73), choose [Select Range] and
press the <m> button.
<n> button.
2 Choose a starting image.
Choosing Images Individually
zz
Press the <m> button.
1 Choose [Select].
zz
Following step 2 in “Using the Menu”
(= 73), choose [Select] and press the
<m> button.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
[ ] is displayed.
zz
To cancel selection, press the <m>
button again. [ ] is no longer displayed.
zz
Repeat this process to specify other
images.
zz
Press the <n> button. A
Y
P
O
zz
Press the <q><r> buttons to choose an
2 Choose an image.
3 Protect the image.
Cover
Selecting a Range
C
image, and then press the <m> button.
3 Choose an ending image.
zz
Press the <r> button to choose [Last
image], and then press the <m> button.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
confirmation message is displayed.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
• Images will not be protected if you switch to Shooting mode or turn
the camera from
off before
finishing the setup process
in step 3.
Downloaded
ManualsCamera.com
Manuals
73
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
zz
Images before the first image cannot be
selected as the last image.
Still Images
Erasing Images
Movies
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered. However, protected
images (= 72) cannot be erased.
1 Choose an image to erase.
4 Protect the images.
zz
Press the <q><r> buttons to choose an
zz
Press the <p> button to choose
[Protect], and then press the <m>
button.
Y
P
O
image.
2 Erase the image.
zz
Press the <m> button, and then choose
[a] in the menu (= 27).
zz
After [Erase?] is displayed, press the
Specifying All Images at Once
1 Choose [Select All Images].
C
zz
Following step 2 in “Using the Menu”
(= 73), choose [Select All Images] and
press the <m> button.
2 Protect the images.
zz
Press the <o><p> buttons to choose
[Protect], and then press the <m>
button.
<q><r> buttons to choose [Erase], and
then press the <m> button.
XX
The current image is now erased.
zz
To cancel erasure, press the <q><r>
buttons to choose [Cancel], and then
press the <m> button.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• To cancel protection for groups of images, choose [Unlock] in step 4 of
“Selecting a Range” or in step 2 of “Specifying All Images at Once”.
Downloaded from ManualsCamera.com Manuals
74
Cover
Erasing All Images
You can erase all images at once. Be careful when erasing images,
because they cannot be recovered. However, protected images (= 72)
cannot be erased.
Choosing a Selection Method
1 Access the setting screen.
zz
Press the <n> button, and then
choose [Erase] on the [1] tab (= 28).
2 Choose a selection method.
zz
Choose a menu item and a setting as
desired (= 28).
zz
Press the <o><p> buttons to choose
a selection method, and then press the
<m> button.
zz
To return to the menu screen, press the
<n> button.
C
Downloaded from ManualsCamera.com Manuals
Choosing Images Individually
1 Choose [Select].
zz
Following step 2 in “Choosing a Selection
Method” (= 75), choose [Select] and
press the <m> button.
2 Choose an image.
zz
Once you choose an image following
step 2 in “Choosing Images Individually”
(= 73), [ ] is displayed.
zz
To cancel selection, press the <m>
button again. [ ] is no longer displayed.
zz
Repeat this process to specify other
images.
Y
P
O
3 Erase the image.
zz
Press the <n> button. A
confirmation message is displayed.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
75
Selecting a Range
Rotating Images
1 Choose [Select Range].
zz
Following step 2 in “Choosing a Selection
Method” (= 75), choose
[Select Range] and press the <m>
button.
1 Choose [\].
zz
Press the <m> button, and then choose
[\] in the menu (= 27).
zz
Follow steps 2 – 3 in “Selecting a Range”
3 Erase the images.
zz
Press the <p> button to choose [Erase],
and then press the <m> button.
Movies
Change the orientation of images and save them as follows.
2 Choose images.
(= 73) to specify images.
Still Images
Y
P
O
2 Rotate the image.
zz
Press the <q> or <r> button, depending
C
Specifying All Images at Once
1 Choose [Select All Images].
zz
Following step 2 in “Choosing a Selection
Method” (= 75), choose
[Select All Images] and press the <m>
button.
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the <m> button to complete
the setting.
Using the Menu
1 Choose [Rotate].
zz
Press the <n> button and choose
[Rotate] on the [1] tab (= 28).
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2 Erase the images.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Downloaded from ManualsCamera.com Manuals
76
2 Rotate the image.
zz
Press the <q><r> buttons to choose an
image.
zz
The image is rotated 90° each time you
press the <m> button.
zz
To return to the menu screen, press the
<n> button.
• Movies with an image quality of [ ] cannot be rotated.
• Rotation is not possible when [Auto Rotate] is set to [Off] (= 77).
Deactivating Auto Rotation
You can organize images by tagging them as favorites. By choosing a
category in filtered playback, you can restrict the following operations to all
of those images.
• Viewing (= 67), Viewing Slideshows (= 71), Protecting Images
(= 72), Erasing Images (= 74), Adding Images to the Print List
(DPOF) (= 121), Adding Images to a Photobook (= 123)
Still Images
Movies
Tagging Images as Favorites
Y
P
O
zz
Press the <m> button, and then choose
Follow these steps to deactivate automatic rotation by the camera, which
rotates images shot in vertical orientation so they are displayed vertically on
the camera.
zz
Press the <n> button, choose [Auto
C
Rotate] on the [1] tab, and then choose
[Off] (= 28).
• Images cannot be rotated (= 76) when you set [Auto Rotate] to
[Off]. Additionally, images already rotated will be displayed in the
original orientation.
• In Smart Shuffle (= 72) mode, even if [Auto Rotate] is set to
[Off], images shot vertically will be displayed vertically, and rotated
images will be displayed in the rotated orientation.
Downloaded from ManualsCamera.com Manuals
Cover
Image Categories
[
] in the menu (= 27).
XX
[Tagged as Favorite] is displayed.
zz
To untag the image, repeat this process
Using the Menu
and choose [ ] again, and then press
the <m> button.
1 Choose [Favorites].
zz
Press the <n> button and choose
[Favorites] on the [1] tab (= 28).
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
77
Cover
Editing Still Images
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
[ ] is displayed.
zz
To untag the image, press the <m>
button again. [ ] is no longer displayed.
zz
Repeat this process to choose additional
images.
3 Finish the setup process.
Preliminary Notes and
Legal Information
• Image editing (= 78 – 81) is only available when the memory
card has sufficient free space.
Still Images
Resizing Images
confirmation message is displayed.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Save a copy of images at a lower resolution.
Y
P
O
zz
Press the <n> button and choose
[Resize] on the [1] tab (= 28).
2 Choose an image.
zz
Press the <q><r> buttons to choose an
• Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 3.
C
• Favorite images will have a three-star rating (
) when transferred
to computers running Windows 8, Windows 7, or Windows Vista. (Does not
apply to movies.)
Basic Guide
Advanced Guide
1 Choose [Resize].
zz
Press the <n> button. A
Contents: Basic Operations
image, and then press the <m> button.
3 Choose an image size.
zz
Press the <q><r> buttons to choose the
size, and then press the <m> button.
XX
[Save new image?] is displayed.
4 Save the new image.
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
XX
The image is now saved as a new file.
Downloaded from ManualsCamera.com Manuals
78
5 Review the new image.
Cropping Area
Cover
3 Adjust the cropping area.
zz
Press the <n> button. [Display new
XX
A frame is displayed around the portion of
zz
Press the <q><r> buttons to choose
XX
The original image is shown in the upper
image?] is displayed.
the image to be cropped.
[Yes], and then press the <m> button.
XX
The saved image is now displayed.
• Editing is not possible for images saved as [
] in step 3.
Preview of Image After Cropping
zz
To change the frame orientation, press
Still Images
Cropping
You can specify a portion of an image to save as a separate image file.
1 Choose [Cropping].
C
zz
Press the <n> button, and then
choose [Cropping] on the [1] tab
(= 28).
2 Choose an image.
Y
P
O
Resolution After Cropping
• Images cannot be resized to a higher resolution.
left, and a preview of the image as
cropped is shown in the lower right.
zz
To resize the frame, move the zoom
lever.
zz
To move the frame, press the
<o><p><q><r> buttons.
zz
Press the <q><r> buttons to choose an
the <m> button.
zz
Press the <n> button.
4 Save as a new image and
review.
zz
Follow steps 4 – 5 in “Resizing Images”
(= 78).
• Editing is not possible for images shot at a resolution of [
(= 39) or resized to [ ] (= 78).
]
• Images supported for cropping will have the same aspect ratio after cropping.
• Cropped images will have a smaller resolution than uncropped images.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
image, and then press the <m> button.
Downloaded from ManualsCamera.com Manuals
79
Still Images
Changing Image Color Tones (My Colors)
Correcting Image Brightness (i-Contrast)
You can adjust image colors and then save the edited image as a separate
file. For details on each option, see “Changing Image Color Tones (My
Colors)” (= 58).
1 Choose [My Colors].
zz
Press the <n> button, and then
choose [My Colors] on the [1] tab
(= 28).
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
3 Choose an option.
zz
Press the <q><r> buttons to choose an
C
option, and then press the <m> button.
4 Save as a new image and
review.
zz
Follow steps 4 – 5 in “Resizing Images”
(= 78).
• Image quality of pictures you repeatedly edit this way will be a little
lower each time, and you may not be able to obtain the desired
color.
• The color of images edited using this function may vary slightly from the color
of images shot using My Colors (= 58).
Downloaded from ManualsCamera.com Manuals
Still Images
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate file.
1 Choose [i-Contrast].
Y
P
O
zz
Press the <n> button, and then
choose [i-Contrast] on the [1] tab
(= 28).
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
3 Choose an option.
zz
Press the <q><r> buttons to choose an
option, and then press the <m> button.
4 Save as a new image and
review.
zz
Follow steps 4 – 5 in “Resizing Images”
(= 78).
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• For some images, correction may be inaccurate or may cause
images to appear grainy.
• Images may look grainy after repeated editing using this function.
• If [Auto] does not produce the expected results, try correcting images using
[Low], [Medium], or [High].
80
Still Images
Correcting Red-Eye
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
Editing Movies
You can cut movies to remove unneeded portions at the beginning or end.
1 Choose [*].
1 Choose [Red-Eye Correction].
zz
Following steps 1 – 5 in “Viewing”
zz
Press the <n> button, and then
choose [Red-Eye Correction] on the [1]
tab (= 28).
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image.
Movies
(= 67), choose [*] and press the
<m> button.
XX
The movie editing panel and editing bar
are now displayed.
Y
P
O
Movie Editing Panel
2 Specify portions to cut.
zz
Press the <o><p> buttons to choose
3 Correct the image.
zz
Press the <m> button.
XX
Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
zz
Enlarge or reduce images as needed.
Follow the steps in = 70.
C
4 Save as a new image and review.
zz
Press the <o><p><q><r> buttons to
choose [New File], and then press the
<m> button.
XX
The image is now saved as a new file.
zz
Follow step 5 in “Resizing Images” (= 79).
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
Downloaded
from ManualsCamera.com
Manuals
• Protected images
cannot be overwritten.
Movie Editing Bar
[ ] or [ ].
zz
To view the portions you can cut
(identified by [ ] on the screen), press
the <q><r> buttons to move [ ]. Cut
the beginning of the movie (from [ ])
by choosing [ ], and cut the end of the
movie by choosing [ ].
zz
Even if you move [ ] to a position other
than a [ ] mark, choosing [ ] will only
cut the portion from the nearest [ ] to
the left, and choosing [ ] will cut the
portion from the nearest [ ] to the right.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3 Review the edited movie.
zz
Press the <o><p> buttons to choose
[ ], and then press the <m> button.
The edited movie is now played.
zz
To edit the movie again, repeat step 2.
81
Cover
zz
To cancel editing, press the <o><p>
Preliminary Notes and
Legal Information
buttons to choose [ ]. Press the <m>
button, press the <q><r> buttons to
choose [OK], and then press the <m>
button again.
Contents: Basic Operations
Basic Guide
4 Save the edited movie.
Advanced Guide
zz
Press the <o><p> buttons to choose
[ ], and then press the <m> button.
zz
Press the <o><p><q><r> buttons to
choose [New File], and then press the
<m> button.
XX
The movie is now saved as a new file.
• To overwrite the original movie with the cut one, choose [Overwrite]
in step 4. In this case, the original movie will be erased.
• [Overwrite] is only available when memory cards lack sufficient free
space.
• Movies may not be saved if the battery runs out while saving is in
progress.
• When editing movies, you should use a fully charged battery or an
AC adapter kit (= 114, sold separately).
C
Downloaded from ManualsCamera.com Manuals
Y
P
O
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
82
Cover
Preliminary Notes and
Legal Information
4
Downloaded from ManualsCamera.com Manuals
6
Contents: Basic Operations
Basic Guide
Advanced Guide
Wi-Fi Functions
Y
P
O
Use Wi-Fi functions to send images from the camera to
a variety of compatible devices, and use the camera with
Web services
C
What You Can Do With Wi-Fi....84
Using Wi-Fi to Send Images From the Camera.....................85
Wi-Fi (Wireless LAN) Precautions..............................85
Security Precautions................86
Glossary.....................................87
Registering a Camera Nickname (First time only)........................88
Connecting to Web Services....89
Connecting to a Smartphone...91
Connecting to Another Camera....93
Connecting to a Computer.......94
Connecting to a Printer............99
Sending Images.......................101
Sending Images to a Computer
via CANON iMAGE GATEWAY...............................103
Geotagging Images on the
Camera....................................103
Editing or Erasing Wi-Fi Settings.........................104
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
83
Cover
What You Can Do With Wi-Fi
Connecting to a Computer
This camera is an approved Wi-Fi * product. You can wirelessly connect to
and send images to the following devices.
Note that, in this chapter, wireless LAN functions other than Wi-Fi may be
referred to as Wi-Fi.
®
*Wi-Fi is a brand name that indicates interoperability certification of Wi-Fi
devices.
Use the included software to wirelessly send images from the
camera to a computer. Refer to the Software Guide for details.
Connecting to a Printer
Send images wirelessly to a PictBridge-compatible printer
(supporting DPS over IP) to print them.
Connecting to Web Services
CANON iMAGE GATEWAY is an online photo service available
to those who have purchased this product. If you register for
free as a member, you can use CANON iMAGE GATEWAY
to access various Web services, such as social networking
services set on a computer.
Images on the camera can also be sent automatically to a
computer via CANON iMAGE GATEWAY.
Connecting to a Smartphone
C
Send images to smartphones and tablet computers that
have Wi-Fi functions. You can also geotag your shots from a
connected smartphone or tablet. Installation of a dedicated
application on the smartphone or tablet is required. See the
Canon website for details.
For convenience in this manual, smartphones, tablets, and
other compatible devices are collectively referred to as
“smartphones”.
Y
P
O
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Connecting to Another Camera
Use the Wi-Fi function to send images between Canon-brand,
compact digital cameras.
Downloaded from ManualsCamera.com Manuals
84
Using Wi-Fi to Send Images From the
Camera
Operation
Device
Preparations
Connection
Send/Print/
Import
Registering a camera
nickname (= 88)
○
○
○
○
○
Installing the included
software (= 18)*1
○
–
–
○
–
Adjusting settings for
using Web services
from CANON iMAGE
GATEWAY (= 89)
○
–
–
–
–
Installing the dedicated
application on the
smartphone (= 91)
–
○
–
–
–
○
(= 89)
○
(= 91)
○
(= 93)
○
(= 94)
○
(= 99)
○*2
○
○
–
Transferring images to a
computer (= 98)
–
–
–
○
Printing images
(= 99)*3
–
–
–
–
Establishing a connection
with the camera
Sending images
(= 101)
C
–
–
○
*1Instructions in this guide apply when the software has been installed correctly from
the included CD-ROM (= 18).
*2 Images are sent automatically when transferred via a server (= 103).
*3For detailed printing instructions, see “Printing Images” (= 117).
Downloaded from ManualsCamera.com Manuals
Wi-Fi (Wireless LAN) Precautions
Cover
Preliminary Notes and
Legal Information
• The model number is ELPH 130 IS IXUS 140
PC1889 / ELPH 120 IS IXUS 135 PC1896 (including
WLAN module model WM218). To identify
your model, check the label on the bottom of
the camera for a number beginning with PC.
Contents: Basic Operations
• Countries and Regions Permitting WLAN
Use
- Use of WLAN is restricted in some countries and regions, and illegal
use may be punishable under national or local regulations. To avoid
violating WLAN regulations, visit the Canon website to check where use
is allowed.
Note that Canon cannot be held liable for any problems arising from
WLAN use in other countries and regions.
• Doing any of the following may incur legal penalties:
- Altering or modifying the product
- Removing the certification labels from the product
• According to foreign exchange and foreign trade law regulations, export
permission (or service transaction permission) from the Japanese
government is necessary to export strategic resources or services
(including this product) outside Japan.
1
2
3
4
5
6
7
8
9
Y
P
O
• Because this product includes American encryption software, it falls
under U.S. Export Administration Regulations, and cannot be exported to
or brought into a country under U.S. trade embargo.
• Be sure to make notes of the wireless LAN settings you use.
The wireless LAN settings saved to this product may be erased due to
incorrect operation of the product, the effects of radio waves or static
electricity, accident or malfunction. Be sure to make notes of wireless
LAN settings as a precaution. Please note that Canon accepts no
responsibility for degradation of content, direct or indirect damages or
loss of revenue arising from use of the product.
Basic Guide
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
85
• When transferring this product to another person, disposing of it, or
sending it for repair, be sure to note the wireless LAN settings and reset
the product to its default settings (erase settings) if necessary.
• Canon will not make compensation for loss or theft of the product.
Canon accepts no responsibility for damages incurred due to
unauthorized access to registered data (image transfer destinations, etc.)
if the product is lost or stolen.
• Be sure to use the product as directed in this guide.
Be sure to use the wireless LAN function of this product within the
guidelines noted in this guide. Canon accepts no responsibility for
damages or loss if the function and product are used in ways other than
as described in this guide.
• Do not use the wireless LAN function of this product near medical
equipment or other electronic equipment.
Use of the wireless LAN function near medical equipment or other
electronic equipment may affect operation of those devices.
Radio Wave Interference Precautions
C
• This product may receive interference from other devices that emit radio
waves. To avoid interference, be sure to use this product as far away as
possible from such devices, or avoid using the devices at the same time
as this product.
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions
more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
• Only use networks you are authorized to use.
This product searches for Wi-Fi networks in the vicinity and displays the
results on the screen. Networks you are not authorized to use (unknown
networks) may also be displayed. However, attempting to connect to or
using such networks could be regarded as unauthorized access. Be sure
to use only networks you are authorized to use, and do not attempt to
connect to other unknown networks.
Y
P
O
If security settings have not been properly set, the following problems may
occur.
• Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions and
attempt to acquire the data you are sending.
• Unauthorized network access
Third parties with malicious intent may gain unauthorized access to
the network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access
such as impersonation (where someone assumes an identity to gain
access to unauthorized information) or springboard attacks (where
someone gains unauthorized access to your network as a springboard to
cover their tracks when infiltrating other systems).
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
To prevent these types of problems from occurring, be sure to thoroughly
secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security
settings.
Downloaded from ManualsCamera.com Manuals
86
Cover
Glossary
Wi-Fi related terms are explained here. Also refer to the explanations of
terms given in the respective sections of this guide.
• Access point
A device that relays radio wave signals to create a Wi-Fi network. This
term also refers to a network that you can use to connect to the Internet
via Wi-Fi.
• Firewall
This is a system that protects networks from computer viruses, external
unauthorized access, and security threats. This is set on the Wi-Fi router
or computer.
• SSID/ESSID
Preconfigured numbers and letters used to identify a specific access
point. Also called the “access point name” or “network name”.
• Encryption key
This is a key used to encrypt data for transmission to and from an access
point.
• IP address
This is an address used to identify a device within a network.
• MAC address
This is a unique address pre-assigned to a network device. It is also
referred to as a “physical address”.
C
Downloaded from ManualsCamera.com Manuals
The camera can print to PictBridge-compatible printers
via Wi-Fi. PictBridge technical standards make it easy
to connect digital cameras, printers, and other devices
directly. Additionally, a new standard called DPS over IP
enables PictBridge connections in network environments,
and the camera is also compatible with this standard.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
Y
P
O
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
87
Cover
Registering a Camera Nickname
(First time only)
To start with, register a camera nickname.
This nickname will be displayed on the screen of target devices when
connecting to other devices via Wi-Fi.
1 Access the Wi-Fi menu.
zz
Press the <1> button to turn the camera on.
zz
Press the <o> button.
2 Access the keyboard.
zz
Press the <m> button.
3 Enter a nickname.
C
zz
Press the <o><p><q><r> buttons to
choose a character, and then press the
<m> button to enter it.
zz
Up to 16 characters can be used.
zz
Choose [ ] or [ ] and press the <m>
button to move the cursor.
zz
Choose [ ] and press the <m> button.
The previous character will be deleted.
• When connecting wirelessly to any device other than a computer, a memory
card must be inserted in the camera. Additionally, the memory card must
contain images in order for you to access Web services or connect to a
smartphone or printer wirelessly.
• To change the camera’s nickname, choose [Wi-Fi Settings] on the [3] tab, and
then choose [Change Device Nickname].
• If the Wi-Fi menu is not displayed but only the display information changes
when you press the <o> button, first press the <p> button to switch from
detailed information display (= 68).
Y
P
O
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4 Save the settings.
zz
Press the <n> button, press the
<o><p> buttons to choose [OK], and
Downloaded from ManualsCamera.com
Manuals
then press the <m>
button.
88
Connecting to Web Services
2 Connect the camera to a
computer with the interface
cable (= 20).
Set up the camera to use a variety of Web services as follows.
Adjusting Settings for Using Web Services
From CANON iMAGE GATEWAY
Adjust account settings for the Web services you want to use.
• A computer is required for Web service settings, starting with CANON
iMAGE GATEWAY.
• Because CameraWindow is used to adjust settings, be sure to install it
from the included CD-ROM beforehand (= 19).
• For information on countries and regions where CANON iMAGE
GATEWAY is available, visit the Canon website (http://canon.com/cig).
1 Register as a CANON iMAGE
GATEWAY member.
zz
From a computer or other device
C
connected to the Internet, access http://
canon.com/cig and visit the CANON
iMAGE GATEWAY site for your region.
zz
Follow the instructions displayed to
complete member registration (free of
charge).
zz
You must have an account with Web
services other than CANON iMAGE
GATEWAY if you desire to use them. For
further details, check the websites for
each Web service you want to register.
Downloaded from ManualsCamera.com Manuals
zz
On a computer running Windows, there
is no need to connect the interface cable
if you complete settings in advance
(= 95). In this case, you can connect
via Wi-Fi.
3 Display CameraWindow
Y
P
O
(= 21).
4 Access the CANON iMAGE
GATEWAY login screen.
zz
Click [Camera Settings], and then click
[Set Up Web Services].
5 Login to CANON iMAGE
GATEWAY.
zz
Enter your CANON iMAGE GATEWAY
login name and password, and then click
[Login].
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
89
6 Set a Web service you want to use.
zz
Follow the on-screen instructions to complete
settings for Web services you want to use.
zz
Once the Web service settings are
complete, click [Finish] at the bottom of
the window to close it.
7 Apply Web service settings to
the camera.
zz
Choose the name of the Web service you
want to set on the camera, and click [ ]
in the middle of the lists.
XX
The name of the Web service that will be
saved to the camera will be displayed in
the [Camera] list.
zz
Click [o] or [p] to change the order of
the Web services that will be displayed in
the camera’s Wi-Fi menu.
zz
After you finish adjusting settings in the
[Camera] list to your liking, close the window.
XX
The settings of Web services and for
transferring images via the server are
applied to the camera.
C
• An Internet connection is required to access CANON iMAGE
GATEWAY (an Internet browser must be installed on the computer,
you must have an account with an Internet service provider, and an
Internet connection must be established).
• When connecting to CANON iMAGE GATEWAY, check the CANON
iMAGE GATEWAY website for browser (Microsoft Internet Explorer,
etc.) settings, conditions, and version information.
Downloaded
from ManualsCamera.com Manuals
• Separate ISP connection and access point fees may be applicable.
Cover
• After logging in to CANON iMAGE GATEWAY the second time in step 5, the
screen in step 7 will be displayed. To change settings for Web services you
use, click [Edit Web Services].
• To add or change Web services, repeat the above procedures starting from
step 2.
Connecting to Web Services
Connect to Web services registered to the camera.
1 Access the Wi-Fi menu.
Y
P
O
zz
Press the <o> button.
2 Choose a Web service.
zz
Press the <o><p><q><r> buttons to
choose the icon of the Web service that
you want to connect to, and then press
the <m> button.
zz
If the Web service has multiple recipients,
select the desired recipient on the [Select
Recipient] screen, and press the <m>
button.
3 Connect to an access point.
zz
With a WPS-compatible access point,
connect to the access point by following
steps 4 – 6 in “Adding a Computer”
(= 96).
zz
With an access point that is not WPScompatible, connect to the access point
by following steps 2 – 3 in “Connecting to
Access Points in the List” (= 98).
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
90
XX
When you have connected to the Web
service, the image transfer screen will be
displayed. Proceed to “Sending Images”
(= 101). However, when [Send via
Server] is selected, images will be sent
as soon as a connection is established
(= 103).
• When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect
to it in step 2. To change access points, select [Switch Network]
from the screen that will be displayed when the connection is
being established, and follow steps 4 – 5 in “Adding a Computer”
(= 96).
• After you have accessed the Wi-Fi menu once, you can access it again by
pressing the <o> button. The recent target device is listed first, so you can
easily connect again by pressing the <o><p> buttons to choose it. To add
a new device, display the device selection screen by pressing the <q><r>
buttons, and then configure the setting.
If you prefer not to display recent target devices, press the <n> button,
and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
C
Connecting to a Smartphone
When establishing a Wi-Fi connection with a smartphone, you can either
use the camera as an access point (Camera Access Point mode) or use
another access point.
Follow these instructions when using the camera as an access point. When
using another access point, see Connecting to Access Points in the List
(= 98).
Installing CameraWindow on a Smartphone
Y
P
O
Before connecting your camera to a smartphone, first install the free
dedicated application, CameraWindow, on your smartphone.
1 Connect the smartphone to a
network.
2 Install CameraWindow.
zz
For an iPhone, iPad, or iPod touch,
download and install CameraWindow
from the Mac App Store.
zz
For an Android device, download and
install CameraWindow from Google Play.
3 Register the smartphone name.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
On the smartphone, start CameraWindow
and enter a name for the smartphone that
will be displayed on the camera.
Downloaded from ManualsCamera.com Manuals
91
• For details on this application (supported smartphones and included functions),
refer to the Canon website.
Establishing the Smartphone Connection
4 Use the smartphone to connect
to the network displayed on the
camera screen.
zz
Choose the displayed SSID (network
1 Access the Wi-Fi menu.
zz
Press the <o> button.
2 Choose a smartphone.
zz
Press the <o><p><q><r> buttons
to choose [ ], and then press the <m>
button.
name) from the smartphone’s Wi-Fi
setting menu.
zz
Enter the encryption key displayed on the
camera screen into the password field on
the smartphone.
Y
P
O
5 Start CameraWindow on the
smartphone.
XX
Once the smartphone is recognized on
3 Choose [Add a Device].
zz
Press the <o><p> buttons to choose
[Add a Device], and then press the <m>
button.
C
XX
The camera’s SSID and encryption key
are displayed on the screen.
the camera, the device connection screen
will be displayed on the camera.
6 Choose a smartphone to
connect to.
zz
Press the <o><p> buttons to choose
the smartphone for the connection
(=91), and then press the <m>
button.
7 Adjust the privacy settings.
zz
Press the <q><r> buttons to choose
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
[Yes], and then press the <m> button.
XX
You can now use the smartphone to
receive images sent from the camera,
or to geotag images on the camera
(= 103).
Downloaded from ManualsCamera.com Manuals
92
XX
When the smartphone has been added
successfully, the image transfer screen
will be displayed. Proceed to “Sending
Images” (= 101).
• When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect to
it in step 3. To change access points, select [Switch Network] from
the screen that will be displayed when the connection is being
established, and follow steps 4 – 5 in “Adding a Computer” (= 96).
• All camera images can be viewed from the connected smartphone
when you choose [Yes] in step 7. To keep camera images private, so
that they cannot be viewed from the smartphone, choose [No] in step 7.
• You can connect to smartphones that you have already connected to by
choosing them on the [Select a Device] screen in step 3.
• After you have accessed the Wi-Fi menu once, you can access it again by
pressing the <o> button. The recent target device is listed first, so you can
easily connect again by pressing the <o><p> buttons to choose it. To add
a new device, display the device selection screen by pressing the <q><r>
buttons, and then configure the setting.
If you prefer not to display recent target devices, press the <n> button,
and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
• The image quality level for movies that can be sent may differ depending
on the smartphone. Refer to the instruction manual provided with your
smartphone for details.
• To add multiple smartphones, repeat the above procedures starting from step 1.
• To change privacy settings for smartphones added to the list, choose the
smartphone whose settings you want to change from [Edit a Device] in step 3,
and then choose [View Settings].
C
Downloaded from ManualsCamera.com Manuals
Connecting to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
• Only Canon-brand cameras equipped with a Wi-Fi function can be connected to
wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected
to if they do not have a Wi-Fi function. You cannot connect to PowerShot SD430
DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with this camera.
1 Access the Wi-Fi menu.
zz
Press the <o> button.
Y
P
O
2 Choose a camera.
zz
Press the <o><p><q><r> buttons to
choose [4], and then press the <m>
button.
3 Choose [Add a Device].
zz
Press the <o><p> buttons to choose
[Add a Device], and then press the <m>
button.
zz
Follow steps 1 – 3 on the target camera.
XX
Camera connection information will be added
when [Start connection on target camera] is
displayed on both camera screens.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
XX
When the target camera has been added
successfully, the image transfer screen
will be displayed. Proceed to “Sending
Images” (= 101).
93
• After you have accessed the Wi-Fi menu once, you can access it again by
pressing the <o> button. The recent target device is listed first, so you can
easily connect again by pressing the <o><p> buttons to choose it. To add
a new device, display the device selection screen by pressing the <q><r>
buttons, and then configure the setting.
If you prefer not to display recent target devices, press the <n> button,
and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
• To add multiple cameras, repeat the above procedures starting from step 1.
• Once a camera is added, the camera nickname will be displayed on the screen
in step 3. To connect to a camera again, simply choose the camera nickname
from the list.
Connecting to a Computer
Configure computer settings for the connection, add the computer as a
connection destination, and transfer images to the computer wirelessly
using the included software CameraWindow as follows.
• When connected to a computer, the camera is used to establish the
connection and then the computer (included software CameraWindow) is used
to transfer images.
Preparing to Register a Computer
Y
P
O
Prepare to register a computer.
Checking Your Computer Environment
For computer environments that allow Wi-Fi connection with a camera, refer
to “System Requirements” (= 19).
Additionally, the included software CameraWindow must be installed
(= 19).
C
Downloaded from ManualsCamera.com Manuals
• Windows 7 Starter and Home Basic editions are not supported.
• Windows 7 N (European version) and KN (South Korean version)
require a separate download and installation of Windows Media
Feature Pack.
For further details, see the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
94
Cover
Checking Your Wi-Fi Environment
To use Wi-Fi, a Wi-Fi base unit (Wi-Fi router, etc.) that acts as your access
point must be connected to a computer. Be sure to use a Wi-Fi base unit
that conforms to the Wi-Fi standard listed in Specifications (= 140).
If you are already using Wi-Fi, confirm the following items and mark each
one on the Check sheet. For instructions on checking network settings,
refer to the access point user guide.
• If system administrator status is needed to adjust network settings,
contact the system administrator for details.
• These settings are very important for network security. Exercise
adequate caution when changing these settings.
Check sheet
Computer Settings for Connecting via Wi-Fi (Windows only)
Y
P
O
On a computer running Windows, you must configure the following settings
before you can connect the camera to the computer wirelessly.
1 Confirm the computer is
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
○ None
○ WEP (open system
Network certificate/data encryption (encryption method/
authentication)
encryption mode)
○ WPA-PSK (TKIP)
The method for encrypting data during transmission via
○ WPA-PSK (AES)
Wi-Fi.
○ WPA2-PSK (TKIP)
○ WPA2-PSK (AES)
C
Encryption key (network key)
The data encryption key used for transmission via Wi-Fi.
Key index (sent key)
The key specified when using WEP for Network certificate/
data encryption.
• A router is a device that creates a network (LAN) structure for connecting
multiple computers. A router that contains an internal Wi-Fi function is called a
“Wi-Fi router”.
• This guide refers to all Wi-Fi routers and base stations as “access points”.
• If you use MAC address filtering on your Wi-Fi network, be sure to add the
camera’s MAC address to your access point. You can check your camera’s
MAC address by choosing the [3] tab, [Wi-Fi Settings], and then [Check MAC
Address].
○1
Downloaded from ManualsCamera.com Manuals
connected to Wi-Fi.
zz
For instructions on checking your network
connection, refer to the computer user
manual.
2 Configure the setting.
zz
Click in the following order: [Start] menu
► [All Programs] ► [Canon Utilities] ►
[CameraWindow] ► [Wi-Fi connection
setup].
zz
In the application that opens, follow the
on-screen instructions and configure the
setting.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
95
• The following Windows settings are configured when you run the utility in step 2.
-Turn on media streaming.
This will enable the camera to find the computer to access via Wi-Fi.
-Turn on network discovery.
This will enable the computer to find the camera.
-Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
-Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
• Some security software may prevent you from completing the settings as
described here. Check the settings of your security software.
Adding a Computer
Add a computer to your list of devices to connect to via Wi-Fi.
Follow these instructions when using a Wi-Fi Protected Setup (WPS)
compatible access point to establish a push-button connection.
If your access point is not WPS-compatible, establish a connection as
described in “Connecting to Access Points in the List” (= 98).
C
• WPS makes it easy to complete settings when connecting devices over Wi-Fi.
You can use either Push Button Configuration Method or PIN Method for
settings on a WPS supported device.
• Refer to the user guide provided with your access point to check if it supports
WPS.
• Be sure to also read the user guide included with your access point.
1 Access the Wi-Fi menu.
zz
Press the <o> button.
Downloaded from ManualsCamera.com Manuals
2 Choose a computer.
zz
Press the <o><p><q><r> buttons to
choose [
button.
], and then press the <m>
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
3 Choose [Add a Device].
zz
Press the <o><p> buttons to choose
Y
P
O
[Add a Device], and then press the <m>
button.
XX
A list of detected access points will be
displayed in the [Select Network] screen.
4 Choose [WPS Connection].
zz
Press the <o><p> buttons to choose
[WPS Connection], and then press the
<m> button.
5 Choose [PBC Method].
zz
Press the <o><p> buttons to choose
[PBC Method], and then press the <m>
button.
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
96
XX
After driver installation is complete, and
6 Establish the connection.
zz
On the access point, hold down the WPS
connection button for a few seconds.
zz
On the camera, press the <m> button.
XX
The camera will connect to the access
point.
XX
A list of computers connected to the
access point will appear in the [Select a
Device] screen.
7 Choose a computer to connect to.
zz
Press the <o><p> buttons to choose
the computer name, and then press the
<m> button.
zz
When using a Macintosh computer,
see Using CameraWindow to Transfer
Images to a Computer (= 98).
C
8 Install a driver (first Windows
connection only).
zz
When the screen at left is displayed, click
the Start menu on the computer, click
[Control Panel], and then click [Add a
device].
zz
Double click the connected camera icon.
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
zz
Proceed to Using CameraWindow
to Transfer Images to a Computer
(= 98).
• When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect
to it in step 3. To change access points, select [Switch Network]
from the screen that will be displayed when the connection is
being established, and follow steps 4 – 5 in “Adding a Computer”
(= 96).
Y
P
O
• You can connect to computers that you have already connected to by choosing
them on the [Select a Device] screen in step 3.
• If you chose [PIN Method] in step 5, a PIN code will be displayed on the
screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user guide included
with your access point.
• To add multiple computers, repeat the above procedures starting from step 1.
• To disconnect from the camera, turn off the camera.
• After you have accessed the Wi-Fi menu once, you can access it again by
pressing the <o> button. The recent target device is listed first, so you can
easily connect again by pressing the <o><p> buttons to choose it. To add
a new device, display the device selection screen by pressing the <q><r>
buttons, and then configure the setting.
If you prefer not to display recent target devices, press the <n> button,
and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
XX
Driver installation will begin.
Downloaded from ManualsCamera.com Manuals
97
5 Choose a computer to connect to.
Connecting to Access Points in the List
1 View the listed access points.
zz
Choose the computer to connect to,
following steps 7 – 8 in “Adding a
Computer” (= 97). The computer is
now added to the list.
zz
View the listed networks (access points)
as described in steps 1 – 3 of “Adding a
Computer” (= 96).
2 Choose an access point.
zz
Press the <o><p> buttons to choose a
network (access point), and then press
the <m> button.
3 Enter the access point’s
encryption key.
zz
Press the <m> button to access the
C
keyboard, and then enter the encryption
key (= 88).
zz
Press the <o><p> buttons to choose
[Next], and then press the <m> button.
4 Choose [Auto].
zz
Press the <o><p> buttons to choose
[Auto], and then press the <m> button.
XX
A list of other devices connected to the
access point will appear in the [Select a
Device] screen.
Downloaded from ManualsCamera.com Manuals
• For information on the access point’s encryption key, refer to the body of the
access point or its user manual.
• Up to 16 access points will be displayed. If no access points are detected,
choose [Manual Settings] in step 2 to manually set an access point. Follow onscreen instructions and enter an SSID, security settings, and an encryption key.
• When you use an access point that you have already connected to for
connecting to another device, [*] is displayed for the encryption key in step 3.
To use the same encryption key, press the <o><p> buttons to choose [Next],
and then press the <m> button.
• To add multiple computers, repeat the above procedures starting from step 1.
Y
P
O
Using CameraWindow to Transfer Images to a
Computer
Use the computer (included software CameraWindow) to transfer images
from the camera to the computer.
• For details on how to use CameraWindow, see the Software Guide (= 18).
1 Display CameraWindow.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
In Windows, click [Downloads Images
From Canon Camera using Canon
CameraWindow].
XX
CameraWindow will be displayed.
98
XX
On a Macintosh computer,
CameraWindow is automatically
displayed when a Wi-Fi connection is
established between the camera and
computer.
2 Import images.
zz
Click [Import Images from Camera], and
then click [Import Untransferred Images].
XX
Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
zz
Click [OK] in the screen that is displayed
after image import is complete.
• If CameraWindow is not displayed when using a Macintosh computer, click the
[CameraWindow] icon in the Dock.
• Movies will take longer to import since the file size is larger than still images.
• To disconnect from the camera, turn off the camera.
• You can also specify to save all images or only selected images to the
computer, and you can change the destination folder. Refer to the Software
Guide (= 18) for details.
C
Downloaded from ManualsCamera.com Manuals
Connecting to a Printer
Connect the camera to a printer via Wi-Fi to print as follows.
When establishing a Wi-Fi connection with a printer, you can either use the
camera as an access point (Camera Access Point mode) or use another
access point.
Follow these instructions when using the camera as an access point. When
using another access point, see Connecting to Access Points in the List
(= 98) in “Adding a Computer”.
1 Access the Wi-Fi menu.
Y
P
O
zz
Press the <o> button.
2 Choose a printer.
zz
Press the <o><p><q><r> buttons to
choose [2], and then press the <m>
button.
3 Choose [Add a Device].
zz
Press the <o><p> buttons to choose
[Add a Device], and then press the <m>
button.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
99
4 Use the printer to connect to
the network displayed on the
camera screen.
zz
Choose the displayed SSID (network
name) from the printer’s Wi-Fi setting
menu.
zz
Enter the encryption key displayed on the
camera screen into the password field on
the printer.
5 Choose the printer.
zz
Once the printer is ready for the
connection, press the <m> button when
the printer name is displayed on the
camera.
XX
When the printer has been added
successfully, the printing screen will be
displayed.
6 Choose an image to print.
C
zz
Press the <q><r> buttons to choose an
image.
zz
Press the <m> button, choose [c], and
press the <m> button again to access
the printing screen.
zz
Press the <o><p> buttons to choose
[Print], and then press the <m> button.
XX
Printing now begins.
zz
For detailed printing instructions, see
“Printing Images” (= 117).
Downloaded from ManualsCamera.com Manuals
Cover
• When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect
to it in step 3. To change access points, select [Switch Network]
from the screen that will be displayed when the connection is
being established, and follow steps 4 – 5 in “Adding a Computer”
(= 96).
• You can connect to printers that you have already connected to by choosing
them on the [Select a Device] screen in step 3.
• After you have accessed the Wi-Fi menu once, you can access it again by
pressing the <o> button. The recent target device is listed first, so you can
easily connect again by pressing the <o><p> buttons to choose it. To add
a new device, display the device selection screen by pressing the <q><r>
buttons, and then configure the setting.
If you prefer not to display recent target devices, press the <n> button,
and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].
Y
P
O
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
100
Sending Images
zz
Repeat this process to choose additional
images.
Send images wirelessly to destinations registered on the camera as follows.
• Images can be uploaded to social networking services or sent to email
addresses, via CANON iMAGE GATEWAY. For details, refer to the CANON
iMAGE GATEWAY website.
• Up to 50 images can be sent together at once. You can send movies together
as long as the total playback time is within two minutes. However, if the
destination is a Web service, the number of movies and images that can be
sent may be less depending on the Web service. See the desired Web service
for details.
• Depending on the condition of the network you are using, it may take a long
time to send movies. Be sure to keep an eye on the camera battery level.
• When connected to a computer, images are transferred using the computer
(included software CameraWindow) instead of the camera (= 98).
1 Choose [Select and send].
C
zz
Press the <o><p><q><r> buttons to
choose [Select and send], and then press
the <m> button.
2 Choose images.
zz
Press the <o><p><q><r> buttons to
choose an image to send, and then press
the <m> button. [ ] is displayed.
zz
To cancel selection, press the <m>
button again. [ ] is no longer displayed.
Downloaded from ManualsCamera.com Manuals
zz
After you finish choosing images, press
the <n> button.
3 Send the images.
zz
Press the <o><p><q><r> buttons to
Y
P
O
choose [ ], and then press the <m>
button. Press the <o><p> buttons to
choose the resolution (size) of images
to send, and then press the <n>
button.
zz
Press the <o><p><q><r> buttons to
choose [Send], and then press the <m>
button.
zz
When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the <m> button.
XX
Image transfer will begin. The screen
darkens during image transfer.
XX
After images are uploaded to a Web
service, [OK] is displayed. Press the
<m> button to return to the playback
screen.
XX
After sending images to a camera or
smartphone, [Transfer completed] will be
displayed, and the display will return to
the image transfer screen.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
101
• Keep your fingers or other objects off the Wi-Fi transmitterreceiver. Covering this may decrease the speed of your image
transfers.
• On the screen, wireless signal strength is indicated by the
following icons.
[ ] high, [ ] medium, [ ] low, [ ] weak
• To disconnect from the camera, press the <n> button.
After the confirmation message, press the <q><r> buttons to
Wi-Fi Antenna choose [OK], and then press the <m> button. You can also use
Area
the smartphone to end the connection.
• Only images larger than the resolution you selected in step 3
will be resized.
• Movies cannot be resized.
• To send only one of the displayed images, choose [Resize] on
the screen in step 1, change the size, and choose [Send this
image].
Cover
Adding Comments
Using the camera, you can add comments (alphanumeric characters and
symbols) to images that you send to email addresses, social networking
services, etc. The number of characters and symbols that can be entered
may differ depending on the Web service.
1 Choose [ ].
zz
Press the <o><p><q><r> buttons to
Y
P
O
choose [
button.
], and then press the <m>
2 Add a comment.
zz
Follow step 3 in “Registering a Camera
C
Nickname (First time only)” (= 88) to
add a comment.
3 Send the image.
zz
Follow the steps in “Sending Images”
(= 101) to send the image.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• When a comment is not entered, the comment set in CANON iMAGE
GATEWAY is automatically sent.
Downloaded from ManualsCamera.com Manuals
102
XX
Once the connection is established, the
Sending Images to a Computer via
CANON iMAGE GATEWAY
Images on the memory card that have not been transferred already can be
sent to a computer via CANON iMAGE GATEWAY.
If the computer that you intend to send images to is turned off, the images
will be stored temporarily on the CANON iMAGE GATEWAY server.
However, the images will be deleted after a while. Start up the computer so
that they can be saved.
1 Choose the type of images
to send (only when sending
movies with images).
zz
Press the <n> button, and then
choose [Wi-Fi Settings] on the [3] tab
(= 28).
zz
Press the <o><p> buttons to choose
[Send via Server], press the <q><r>
buttons to choose [Stills/Movies], and
then press the <m> button.
zz
When sending only images, go to step 2.
2 Send the images.
C
zz
Follow the steps in “Connecting to Web
Services” (= 90) to choose [
Downloaded from ManualsCamera.com Manuals
].
images are sent. (The screen will close in
about one minute.)
XX
After the images are sent, [OK] is
displayed. Press the <m> button to
return to the playback screen.
XX
When the images have been sent successfully
to the CANON iMAGE GATEWAY server, [ ]
is displayed on the screen.
3 Turn on the computer.
Y
P
O
zz
Images are automatically saved to the
computer when you turn it on.
• When sending images, you should use a fully charged battery or an
AC adapter kit (sold separately, = 114).
• Even if images were imported to the computer through a different method, any
images not sent to the computer via CANON iMAGE GATEWAY will be sent to
the computer.
Geotagging Images on the Camera
GPS data recorded on a smartphone using the dedicated CameraWindow
application (= 91) can be added to images on the camera. Images are
tagged with information including the latitude, longitude, and elevation.
• Before shooting, make sure the date and time and your home time
zone are set correctly. (See Setting the Date and Time (= 13).)
Additionally, in [Time Zone] (= 108), specify any shooting
destinations that are in other time zones.
• The smartphone you will use for geotagging must be authorized to
view the images on the camera (= 92).
• Others may be able to locate or identify you by using location data
in your geotagged still images or movies. Be careful when sharing
these images with others, as when posting images online where
many others can view them.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
103
Editing or Erasing Wi-Fi Settings
4 Choose a device to edit.
zz
Press the <o><p> buttons to choose
Edit or erase Wi-Fi settings as follows.
the device to edit, and then press the
<m> button.
Editing Connection Information
Edit connection information saved to the camera. You can change device
nicknames (display names) that are displayed on the camera, and erase
connection information.
The following explains the procedure when the target device is a computer.
zz
Pressing the <o> button will show recent
target devices. To access the Wi-Fi menu,
press the <q><r> buttons.
2 Choose a device to edit.
zz
Press the <o><p><q><r> buttons to
choose the icon of the device to edit, and
then press the <m> button.
C
zz
Press the <o><p> buttons to choose
[Edit a Device], and then press the <m>
button.
Downloaded from ManualsCamera.com Manuals
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
5 Choose an option to edit.
zz
Press the <o><p> buttons to choose an
1 Access the Wi-Fi menu.
3 Choose [Edit a Device].
Cover
Y
P
O
option to edit, and then press the <m>
button.
zz
The settings you can change depend on
what device or service the camera will
access.
Configurable Settings
Connection
4
c
Web
Services
[Change Device Nickname] (= 105)
O
O
O
O
–
[View Settings] (= 92)
–
O
–
–
–
[Erase Connection Info] (= 105)
O
O
O
O
–
O: Configurable –: Not configurable
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
104
Changing a Device Nickname
You can change the device nickname (display name) that is displayed on
the camera.
Change the nickname.
zz
Following step 5 in “Editing Connection
Information” (= 104), choose [Change
Device Nickname] and press the <m>
button.
zz
Select the input field and press the <m>
button. Use the keyboard displayed to
enter a new nickname (= 88).
1 Choose [Erase Connection
C
zz
Following step 5 in “Editing Connection
Information” (= 104), choose [Erase
Connection Info] and press the <m>
button.
2 Choose the connection
information to erase.
zz
After [Erase?] is displayed, press the
<q><r> buttons to choose [OK], and
then press the <m> button.
XX
The selected connection information will
be erased.
Downloaded from ManualsCamera.com Manuals
Return the Wi-Fi settings to default if you transfer ownership of the camera
to another person, or dispose of it.
1 Choose [Wi-Fi Settings].
zz
Press the <n> button, and then
choose [Wi-Fi Settings] on the [3] tab
(= 28).
Y
P
O
2 Choose [Reset Settings].
zz
Press the <o><p> buttons to choose
Erasing Connection Information
Erase connection information (information about devices that you have
connected to) as follows.
Info].
Returning the Wi-Fi Settings to Default
[Reset Settings], and then press the
<m> button.
3 Restore the default settings.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
XX
The Wi-Fi settings are now reset.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• When returning the Wi-Fi settings to defaults, all Web services set using a
computer will also be erased from the camera. Be sure that you want to reset
all Wi-Fi settings before using this option.
To clear the settings completed in “Sending Images to a Computer via CANON
iMAGE GATEWAY” (= 103), connect your camera to the computer and use
CameraWindow to erase the connection information.
• To reset other settings (aside from Wi-Fi) to defaults, choose [Reset All] in the
[3] tab.
105
Cover
Preliminary Notes and
Legal Information
4
Downloaded from ManualsCamera.com Manuals
7
Setting Menu
Y
P
O
Customize or adjust basic camera functions for greater
convenience
C
Adjusting Basic Camera
Functions................................107
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
106
Adjusting Basic Camera Functions
Hiding Hints and Tips
Functions can be configured on the [3] tab. Customize commonly used
functions as desired, for greater convenience (= 28).
Silencing Camera Operations
Hints and tips are normally shown when you choose FUNC. menu
(= 27) or Menu (= 28) items. If you prefer, you can deactivate this
information.
zz
Choose [Hints & Tips], and then choose
Silence camera sounds and movies as follows.
[Off].
zz
Choose [Mute], and then choose [On].
Y
P
O
Date and Time
• Operation can also be silenced by holding down the <p> button as you turn
the camera on.
• Sound is not played during movies if you mute camera sounds (= 67). To
restore sound during movies, press the <o> button. Adjust volume with the
<o><p> buttons, as needed.
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
C
Adjust the date and time as follows.
zz
Choose [Date/Time], and then press the
<m> button.
zz
Press the <q><r> buttons to choose
an item, and then press the <o><p>
buttons to adjust the setting.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Choose [Volume], and then press the
<m> button.
zz
Choose an item, and then press the
<q><r> buttons to adjust the volume.
Downloaded from ManualsCamera.com Manuals
107
World Clock
Lens Retraction Timing
To ensure that your shots will have the correct local date and time when you
travel abroad, simply register the destination in advance and switch to that
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in Setting the Date and Time (= 13).
1 Specify your destination.
zz
Choose [Time Zone], and then press the
<m> button.
zz
Press the <o><p> buttons to choose
[ World], and then press the <m>
button.
zz
Press the <q><r> buttons to choose the
destination.
zz
To set daylight saving time (1 hour
ahead), press the <o><p> buttons to
choose [ ].
zz
Press the <m> button.
C
2 Switch to the destination time
zone.
zz
Press the <o><p> buttons to choose
[ World], and then press the <n>
button.
XX
[ ] is now shown on the shooting screen
(= 131).
• Adjusting the date or time while in [ ] mode (= 13) will automatically
Home] time and date.
update your [
Downloaded from ManualsCamera.com Manuals
The lens is normally retracted for safety about one minute after you press
the <1> button in Shooting mode (= 25). To have the lens retracted
immediately after you press the <1> button, set the retraction timing to [0 sec.].
zz
Choose [Lens Retract], and then choose
[0 sec.].
Y
P
O
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When the
camera is not in use, the screen quickly darkens to reduce battery consumption.
1 Configure the setting.
zz
Choose [Eco Mode], and then choose [On].
XX
[ ] is now shown on the shooting screen
(= 131).
XX
The screen darkens when the camera is
not used for approximately two seconds;
approximately ten seconds after darkening,
the screen turns off. The camera turns off
after approximately three minutes of inactivity.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2 Shoot.
zz
To activate the screen and prepare for
shooting when the screen is off but the lens
is still out, press the shutter button halfway.
108
Cover
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed (= 25).
• For maximum brightness, press and hold the <p> button for at least one
second when the shooting screen is displayed or when in single-image display.
(This will override the [LCD Brightness] setting on the [3] tab.) To restore
the original brightness, press and hold the <p> button again for at least one
second or restart the camera.
zz
Choose [Power Saving], and then press
the <m> button.
Hiding the Start-up Screen
zz
After choosing an item, press the
<q><r> buttons to adjust it as needed.
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
Y
P
O
zz
Choose [Start-up Image], and then
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
• These power-saving functions are not available when you have set Eco mode
(= 108) to [On].
Screen Brightness
Adjust screen brightness as follows.
C
zz
Choose [LCD Brightness], and then
press the <q><r> buttons to adjust the
brightness.
choose [Off].
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back them
up.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
1 Access the [Format] screen.
zz
Choose [Format], and then press the
<m> button.
Downloaded from ManualsCamera.com Manuals
109
Cover
Low-Level Formatting
2 Choose [OK].
zz
Press the <o><p> buttons to choose
[Cancel], press the <q><r> buttons to
choose [OK], and then press the <m>
button.
3 Format the memory card.
zz
To begin the formatting process, press
the <o><p> buttons to choose [OK],
and then press the <m> button.
zz
When formatting is finished, [Memory
card formatting complete] is displayed.
Press the <m> button.
• Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards, take
steps to protect personal information if necessary, as by physically
destroying cards.
C
• The total card capacity indicated on the formatting screen may be less than
the advertised capacity.
Downloaded from ManualsCamera.com Manuals
Perform low-level formatting in these cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing is
slower, continuous shooting is slower, or movie recording suddenly stops.
Low-level formatting erases all data on a memory card. Before low-level
formatting, copy images on the memory card to a computer, or take other
steps to back them up.
zz
On the screen in step 2 of “Formatting
Memory Cards” (= 110), press the
<o><p> buttons to choose [Low Level
Format], and then press the <q><r>
buttons to select this option. A [ ] icon is
displayed.
zz
Follow steps 2 – 3 in “Formatting Memory
Cards” (= 110) to continue with the
formatting process.
Y
P
O
• Low-level formatting takes longer than Formatting Memory Cards (= 109),
because data is erased from all storage regions of the memory card.
• You can cancel low-level formatting in progress by choosing [Stop]. In this
case, all data will be erased, but the memory card can be used normally.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
110
File Numbering
Metric/Non-Metric Display
Your shots are automatically numbered in sequential order (0001 – 9999)
and saved in folders that store up to 2,000 images each. You can change
how the camera assigns file numbers.
zz
Choose [File Numbering], and then
Change the unit of measurement shown in GPS information for elevation
(= 68) and elsewhere from m/cm to ft/in as needed.
zz
Choose [Units], and then choose [ft/in].
choose an option.
Continuous
Images are numbered consecutively
(until the 9999th shot is taken/saved)
even if you switch memory cards.
Auto Reset
Image numbering is reset to 0001
if you switch memory cards, or
when a new folder is created.
• Regardless of the option selected in this setting, shots may be numbered
consecutively after the last number of existing images on newly inserted
memory cards. To start saving shots from 0001, use an empty (or formatted
(= 109)) memory card.
• Refer to the Software Guide (= 18) for information on the card folder
structure and image formats.
Date-Based Image Storage
C
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
Y
P
O
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed
on the screen. Other certification logos are printed in this guide, on the
camera packaging, or on the camera body.
zz
Choose [Certification Logo Display], and
then press the <m> button.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Choose [Create Folder], and then choose
[Daily].
XX
Images will now be saved in folders
created on the shooting date.
Downloaded from ManualsCamera.com Manuals
111
Display Language
Cover
Restoring Defaults
Change the display language as needed.
zz
Choose [Language
the <m> button.
If you accidentally change a setting, you can restore default camera
settings.
], and then press
zz
Press the <o><p><q><r> buttons to
choose a language, and then press the
<m> button.
• You can also access the [Language] screen in Playback mode by pressing and
holding the <m> button and immediately pressing the <n> button.
Adjusting Other Settings
The following settings can also be adjusted on the [3] tab.
• [Video System] (= 115)
• [Wi-Fi Settings] (= 83)
Downloaded from ManualsCamera.com Manuals
C
zz
Choose [Reset All], and then press the
<m> button.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
XX
Default settings are now restored.
Y
P
O
• The following functions are not restored to default settings.
-Shooting mode (= 45)
-Colors chosen in Color Accent (= 49) or Color Swap (= 49)
-Custom white balance data you have recorded (= 58)
-Wi-Fi settings (= 83)
-[3] tab settings [Date/Time] (= 107), [Time Zone] (= 108), [Video
] (= 112)
System] (= 115), and [Language
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
112
Cover
Preliminary Notes and
Legal Information
4
Downloaded from ManualsCamera.com Manuals
8
Accessories
Y
P
O
Enjoy the camera in more ways with optional Canon
accessories and other compatible accessories sold
separately
C
Optional Accessories.............114
Using Optional Accessories..115
Printing Images.......................117
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
113
Cover
Optional Accessories
The following camera accessories are sold separately. Note that availability
varies by area, and some accessories may no longer be available.
Power Supplies
Flash Unit
Battery Pack NB-11L
zz
Rechargeable lithium-ion battery
Battery Charger CB-2LF/CB-2LFE
zz
Charger for Battery Pack NB-11L
• CB-2LD and CB-2LDE are also supported.
• The battery includes a convenient cover which you can attach to know the
charging status at a glance. Attach the cover so that o is visible on a charged
battery, and attach it so that o is not visible on an uncharged battery.
AC Adapter Kit ACK-DC90
zz
For powering the camera using
• The battery charger and AC adapter kit can be used in areas with
100 – 240 V AC power (50/60 Hz).
• For power outlets in a different format, use a commercially available
adapter for the plug. Never use an electrical transformer designed
for traveling, which may damage the battery.
C
household power. Recommended when
using the camera over extended periods,
or when connecting the camera to a
printer or computer. Cannot be used to
charge the camera battery.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
High-Power Flash HF-DC2
Y
P
O
zz
External flash for illuminating subjects
that are out of range of the built-in flash.
High-Power Flash HF-DC1 can also be
used.
Other Accessories
AV Cable AVC-DC400
zz
Connect the camera to a TV to enjoy
playback on the larger TV screen.
Printers
anon-brand PictBridgeC
Compatible Printers
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Printing images without a computer is
Downloaded from ManualsCamera.com Manuals
possible by connecting the camera to
a Canon-brand PictBridge-compatible
printer. For details, visit your nearest
Canon dealer.
114
Still Images
Using Optional Accessories
Still Images
Movies
video input.
Movies
Playback on a TV
Connecting the camera to a TV with the AV Cable AVC-DC400 (sold
separately) enables you to view your shots on the larger screen of the TV
as you control the camera.
For details on connection or how to switch inputs, refer to the TV manual.
• Some information may not be displayed on the TV (= 132).
1 Make sure the camera and TV
are off.
Black or white
Yellow
2 Connect the camera to the TV.
zz
On the TV, insert the cable plugs fully into
the video inputs as shown.
Yellow
Black
C
zz
On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
Downloaded from ManualsCamera.com Manuals
3 Turn the TV on and switch to
zz
Switch the TV input to the video input you
connected the cable to in step 2.
4 Turn the camera on.
zz
Press the <1> button to turn the camera
on.
XX
Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
zz
When finished, turn off the camera and
TV before disconnecting the cable.
Y
P
O
• Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the <n> button and choose [Video
System] on the [3] tab.
• When the camera and TV are connected, you can also shoot while previewing
shots on the larger screen of the TV. To shoot, follow the same steps as when
using the camera screen.
However, AF-Point Zoom (= 41) and Stitch Assist (= 53) are not
available.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
115
Still Images
Movies
Powering the Camera with Household Power
4 Close the cover.
zz
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)
eliminates the need to monitor the remaining battery level.
1 Make sure the camera is off.
2 Open the cover.
zz
Follow step 2 in “Inserting the Battery
and Memory Card” (= 12) to open
the memory card/battery cover, and then
open the coupler cable port cover as
shown.
3 Insert the coupler.
zz
Insert the coupler facing the direction
shown, just as you would a battery
(following step 3 in “Inserting the Battery
and Memory Card” (= 12)).
C
Terminals
5 Connect the power cord.
zz
Insert the adapter plug into the end of the
Y
P
O
coupler cable.
zz
Insert one end of the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
zz
Turn the camera on and use it as desired.
zz
When finished, turn the camera off and
unplug the power cord from the outlet.
• Do not disconnect the adapter or unplug the power cord while
the camera is still on. This may erase your shots or damage the
camera.
• Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Make sure the coupler cable passes
through the port.
Coupler Cable Port
Downloaded
from ManualsCamera.com Manuals
116
Still Images
Printing Images
Movies
Your shots can easily be printed by connecting the camera to a printer. On
the camera, you can specify images to set up batch printing, prepare orders
for photo development services, and prepare orders or print images for
photobooks.
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
Still Images
Easy Print
3 Turn the printer on.
4 Turn the camera on.
zz
Press the <1> button to turn the camera
on.
5 Choose an image.
zz
Press the <q><r> buttons to choose an
Y
P
O
image.
6 Access the printing screen.
zz
Press the <m> button, choose [c], and
Easily print your shots by connecting the camera to a PictBridge-compatible
printer (sold separately) with the included interface cable (= 2).
1 Make sure the camera and
printer are off.
C
2 Connect the camera to the
printer.
zz
Open the cover. Holding the smaller
cable plug in the orientation shown, insert
the plug fully into the camera terminal.
zz
Connect the larger cable plug to the
printer. For other connection details, refer
to the printer manual.
press the <m> button again.
7 Print the image.
zz
Press the <o><p> buttons to choose
[Print], and then press the <m> button.
XX
Printing now begins.
zz
To print other images, repeat steps 5 – 6
after printing is finished.
zz
When you are finished printing, turn the
camera and printer off and disconnect
the cable.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• For Canon-brand PictBridge-compatible printers (sold separately), see
“Printers” (= 114).
Downloaded from ManualsCamera.com Manuals
117
Still Images
Configuring Print Settings
Cropping Images Before Printing (Cropping)
1 Access the printing screen.
zz
Follow steps 1 – 6 in “Easy Print”
(= 117) to access the screen at left.
2 Configure the settings.
item, and then press the <q><r> buttons
to choose an option.
Date
File No.
Both
Off
Default
Matches current printer settings.
Prints images with the date added.
Prints images with both the date and file number added.
–
–
Uses information from the time of shooting to print under
optimal settings.
Corrects red-eye.
No. of Copies Choose the number of copies to print.
Cropping
Paper
Settings
C
Off
On
Red-Eye 1
–
Specify a desired image area to print (= 118).
–
Specify the paper size, layout, and other details
(= 119).
Downloaded from ManualsCamera.com Manuals
1 Choose [Cropping].
Settings” (= 118) to access the printing
screen, choose [Cropping] and press the
<m> button.
XX
A cropping frame is now displayed,
indicating the image area to print.
Y
P
O
2 Adjust the cropping frame as
Prints images with the file number added.
Matches current printer settings.
By cropping images before printing, you can print a desired image area
instead of the entire image.
zz
After following step 1 in “Configuring Print
zz
Press the <o><p> buttons to choose an
Default
Still Images
needed.
zz
To resize the frame, move the zoom lever.
zz
To move the frame, press the
<o><p><q><r> buttons.
zz
To rotate the frame, press the <m>
button.
zz
Press the <n> button, press the
<o><p> buttons to choose [OK], and
then press the <m> button.
3 Print the image.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
zz
Follow step 7 in “Easy Print” (= 117)
to print.
• Cropping may not be possible at small image sizes, or at some
aspect ratios.
• Dates may not be printed correctly if you crop images shot with
[Date Stamp
] selected.
118
Cover
Still Images
4 Choose a layout.
Choosing Paper Size and Layout Before Printing
zz
Press the <o><p> buttons to choose
an option.
zz
When choosing [N-up], press the
<q><r> buttons to specify the number of
images per sheet.
zz
Press the <m> button.
1 Choose [Paper Settings].
zz
After following step 1 in “Configuring Print
Settings” (= 118) to access the printing
screen, choose [Paper Settings] and
press the <m> button.
zz
Press the <o><p> buttons to choose an
option, and then press the <m> button.
C
zz
Press the <o><p> buttons to choose an
option, and then press the <m> button.
Downloaded from ManualsCamera.com Manuals
Y
P
O
Available Layout Options
2 Choose a paper size.
3 Choose a type of paper.
5 Print the image.
Default
Matches current printer settings.
Bordered
Prints with blank space around the image.
Borderless
Borderless, edge-to-edge printing.
N-up
Choose how many images to print per sheet.
ID Photo
Prints images for identification purposes.
Only available for images with a resolution of L and an aspect ratio of
4:3.
Fixed Size
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
119
Still Images
Printing ID Photos
Movies
Printing Movie Scenes
1 Choose [ID Photo].
1 Access the printing screen.
zz
Following steps 1 – 4 in “Choosing
zz
Follow steps 1 – 6 in “Easy Print”
Paper Size and Layout Before Printing”
(= 119), choose [ID Photo] and press
the <m> button.
2 Choose the long and short side
length.
zz
Press the <o><p> buttons to choose
an item. Choose the length by pressing
the <q><r> buttons, and then press the
<m> button.
3 Choose the printing area.
zz
Follow step 2 in “Cropping Images Before
C
Printing (Cropping)” (= 118) to choose
the printing area.
4 Print the image.
Downloaded from ManualsCamera.com Manuals
(= 117) to choose a movie. The screen
at left is displayed.
2 Choose a printing method.
Y
P
O
zz
Press the <o><p> buttons to choose
[ ], and then press the <q><r> buttons
to choose the printing method.
3 Print the image.
Movie Printing Options
Single
Prints the current scene as a still image.
Sequence
Prints a series of scenes, a certain interval apart, on a single sheet of
paper. You can also print the folder number, file number, and elapsed
time for the frame by setting [Caption] to [On].
• To cancel printing in progress, press the <m> button.
• [ID Photo] and [Sequence] cannot be chosen on Canon-brand PictBridgecompatible printers from CP720/CP730 and earlier models.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
120
Still Images
Adding Images to the Print List (DPOF)
Batch printing (= 123) and ordering prints from a photo development
service can be set up on the camera. Choose up to 998 images on a
memory card and configure relevant settings, such as the number of copies,
as follows. The printing information you prepare this way will conform to
DPOF (Digital Print Order Format) standards.
Still Images
Configuring Print Settings
Specify the printing format, whether to add the date or file number, and
other settings as follows. These settings apply to all images in the print list.
zz
Press the <n> button, and then
choose [Print Settings] on the [2] tab.
Choose and configure settings as desired
(= 28).
Standard
Print Type
Date
File No.
Clear DPOF
data
One image is printed per sheet.
C
Index
Smaller versions of multiple images are printed
per sheet.
Both
Both standard and index formats are printed.
On
Images are printed with the shooting date.
Off
–
On
Images are printed with the file number.
Off
–
On
All image print list settings are cleared after
printing.
–
Off ManualsCamera.com
Downloaded from
Manuals
Cover
• Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
• Setting [Date] to [On] may cause some printers to print the date twice.
• Specifying [Index] will prevent you from choosing [On] for both [Date] and [File
No.] at the same time.
• The date is printed in a format matching setting details in [Date/Time] on the
[3] tab, accessible by pressing the <n> button (= 13).
• Index printing is not available on some Canon-brand PictBridge-compatible
printers (sold separately).
Y
P
O
Still Images
Setting Up Printing for Individual Images
1 Choose [Select Images & Qty.].
zz
Press the <n> button, choose
[Select Images & Qty.] on the [2] tab,
and then press the <m> button.
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
XX
You can now specify the number of copies.
zz
If you specify index printing for the image,
it is labeled with a [ ] icon. To cancel
index printing for the image, press the
<m> button again. [ ] is no longer
displayed.
121
3 Specify the number of prints.
zz
Press the <o><p> buttons to specify
the number of prints (up to 99).
zz
To set up printing for other images and
specify the number of prints, repeat steps
2 – 3.
zz
Printing quantity cannot be specified for
index prints. You can only choose which
images to print, by following step 2.
zz
When finished, press the <n> button
to return to the menu screen.
Still Images
Setting Up Printing for a Range of Images
zz
Following step 1 in “Setting Up Printing
for Individual Images” (= 121), choose
[Select Range] and press the <m>
button.
C
zz
Follow steps 2 – 3 in “Selecting a Range”
(= 73) to specify images.
zz
Press the <o><p> buttons to choose
[Order], and then press the <m> button.
Downloaded from ManualsCamera.com Manuals
Still Images
Setting Up Printing for All Images
zz
Following step 1 in “Setting Up Printing
for Individual Images” (= 121), choose
[Select All Images] and press the <m>
button.
zz
Press the <q><r> buttons to choose
Y
P
O
[OK], and then press the <m> button.
Still Images
Clearing All Images from the Print List
zz
Following step 1 in “Setting Up Printing
for Individual Images” (= 121), choose
[Clear All Selections] and press the <m>
button.
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
122
Still Images
Printing Images Added to the Print List (DPOF)
zz
When images have been added to the
print list (= 121 – 122), the screen
at left is displayed after you connect
the camera to a PictBridge-compatible
printer. Press the <o><p> buttons to
choose [Print now], and then simply press
the <m> button to print the images in the
print list.
zz
Any DPOF print job that you temporarily
stop will be resumed from the next image.
Still Images
Adding Images to a Photobook
Photobooks can be set up on the camera by choosing up to 998 images
on a memory card and importing them into the software on your computer,
where they are stored in their own folder. This is convenient when ordering
printed photobooks online or printing photobooks with your own printer.
Choosing a Selection Method
C
zz
Press the <n> button, choose
[Photobook Set-up] on the [1] tab, and
then choose how you will select images.
Downloaded from ManualsCamera.com Manuals
Cover
• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
• After importing images to your computer, also refer to the Software Guide
(= 18) and the printer manual for further information.
Still Images
Y
P
O
Adding Images Individually
1 Choose [Select].
zz
Following the procedure in “Choosing
a Selection Method” (= 123), choose
[Select] and press the <m> button.
2 Choose an image.
zz
Press the <q><r> buttons to choose an
image, and then press the <m> button.
XX
[ ] is displayed.
zz
To remove the image from the photobook,
press the <m> button again. [ ] is no
longer displayed.
zz
Repeat this process to specify other
images.
zz
When finished, press the <n> button
to return to the menu screen.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
123
Cover
Still Images
Preliminary Notes and
Legal Information
Adding All Images to a Photobook
Contents: Basic Operations
zz
Following the procedure in “Choosing
a Selection Method” (= 123), choose
[Select All Images] and press the <m>
button.
Basic Guide
Advanced Guide
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Still Images
Removing All Images from a Photobook
zz
Following the procedure in “Choosing
a Selection Method” (= 123), choose
[Clear All Selections] and press the <m>
button.
C
zz
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
Downloaded from ManualsCamera.com Manuals
Y
P
O
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
124
Cover
Preliminary Notes and
Legal Information
4
Downloaded from ManualsCamera.com Manuals
9
Appendix
Y
P
O
Helpful information when using the camera
C
Troubleshooting......................126
On-Screen Messages..............129
On-Screen Information...........131
Functions and Menu Tables......................................134
Handling Precautions.............140
Specifications..........................140
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
125
Troubleshooting
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Strange display on the screen under low light (= 26).
Strange display on the screen when shooting.
Nothing happens when the power button is pressed.
Note that the following display problems are not recorded in still images but are
recorded in movies.
• The screen may darken under bright light.
• The screen may flicker under fluorescent or LED lighting.
• Purplish banding may appear on the screen if you compose a shot that includes a
bright light source.
• Confirm that the battery is charged (= 11).
No date stamp is added to images.
Power
• Confirm that the battery is inserted facing the correct way (= 12).
• Configure the [Date Stamp
] setting (= 107). Note that date stamps are not added to
images automatically, merely because you have configured the [Date/Time] setting (= 37).
• Confirm that the memory card/battery cover is fully closed (= 12).
• Dirty battery terminals reduce battery performance. Try cleaning the terminals with a
cotton swab and reinserting the battery a few times.
The battery is depleted quickly.
• Battery performance decreases at low temperatures. Try warming the battery a little
by putting it in your pocket, for example, ensuring that the terminals do not touch any
metal objects.
• If these measures do not help and the battery is still depleted soon after charging, it
has reached the end of its life. Purchase a new battery.
The lens is not retracted.
C
• Do not open the memory card/battery cover while the camera is on. Close the cover,
turn the camera on, and then turn it off again (= 12).
The battery is swollen.
• Battery swelling is normal and does not pose any safety concerns. However, if battery
swelling prevents the battery from fitting in the camera, contact a Canon Customer
Support Help Desk.
Display on a TV
Camera images look distorted or not displayed on a TV (= 115).
Shooting
Cannot shoot.
• InDownloaded
Playback mode (= 14), press
the shutter button halfwayManuals
(= 26).
from
ManualsCamera.com
Y
P
O
• Date stamps are not added in shooting modes (= 138) in which this setting cannot
be configured (= 37).
[h] flashes on the screen when the shutter button is pressed, and
shooting is not possible (= 32).
[
] is displayed when the shutter button is pressed halfway (= 37).
• Set [IS Mode] to [Continuous] (= 65).
• Set the flash mode to [h] (= 64).
• Increase the ISO speed (= 56).
• Mount the camera on a tripod or take other measures to keep it still. In this case, you
should set [IS Mode] to [Off] (= 65).
Shots are out of focus.
• Press the shutter button halfway to focus on subjects before pressing it all the way
down to shoot (= 26).
• Make sure subjects are within focusing range (= 142).
• Set [AF-assist Beam] to [On] (= 42).
• Confirm that unneeded functions such as macro are deactivated.
• Try shooting with focus lock or AF lock (= 62, 63).
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
• To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter button
halfway. Otherwise, try pressing the shutter button halfway repeatedly.
126
• Set the flash mode to [h] (= 64).
• Adjust brightness by using exposure compensation (= 55).
• Adjust contrast by using i-Contrast (= 57, 80).
• Use AE lock or spot metering (= 55, 56).
The elapsed time shown is incorrect, or recording is interrupted.
• Use the camera to format the memory card, or switch to a card that supports highspeed recording. Note that even if the elapsed time display is incorrect, the length of
movies on the memory card corresponds to the actual recording time (= 109, 142).
[
Subjects look too bright, highlights are washed-out.
Shots look too dark despite the flash firing (= 32).
• Zooming is not possible when shooting movies in [
Subjects in flash shots look too bright, highlights are washed-out.
• Shoot within flash range (= 142).
• Set the flash mode to [!] (= 37).
Shots look grainy.
• Lower the ISO speed (= 56).
Subjects are affected by red-eye (= 39).
Y
P
O
Zooming is not possible.
• Shoot within flash range (= 142).
• Increase the ISO speed (= 56).
• This is caused by light from the flash reflecting off dust or airborne particles.
] is displayed and shooting stops automatically.
The camera’s internal memory buffer filled up as the camera could not record to the
memory card quickly enough. Try one of the following measures.
• Use the camera to perform low-level formatting of the memory card (= 110).
• Lower the image quality (= 40).
• Switch to a memory card that supports high-speed recording (= 142).
• Set the flash mode to [!] (= 37).
• Adjust brightness by using exposure compensation (= 55).
• Use AE lock or spot metering (= 55, 56).
• Reduce the lighting on subjects.
White dots or similar image artifacts appear in flash shots.
Cover
Shooting Movies
Subjects in shots look too dark.
C
• Set [Red-Eye Lamp] to [On] (= 42) to activate the red-eye reduction lamp
(= 3) in flash shots. Note that while the red-eye reduction lamp is on (for about
one second), it is not possible to shoot, because the lamp is counteracting red-eye.
For best results, have subjects look at the red-eye reduction lamp. Also try increasing
the lighting in indoor scenes and shooting at closer range.
• Edit images using red-eye correction (= 81).
Recording to the memory card takes too long, or continuous shooting is slower.
• Use the camera to perform low-level formatting of the memory card (= 110).
] mode (= 47).
Playback
Playback is not possible.
• Image or movie playback may not be possible if a computer is used to rename files or
alter the folder structure. Refer to the Software Guide (= 18) for details on folder
structure and file names.
Playback stops, or audio skips.
• Switch to a memory card that you have performed low-level formatting on with the
camera (= 110).
• There may be brief interruptions when playing movies copied to memory cards that
have slow read speeds.
• When movies are played on a computer, frames may be dropped and audio may skip
if computer performance is inadequate.
Sound is not played during movies.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• Adjust the volume (= 67) if you have activated [Mute] (= 107) or the sound in
the movie is faint.
• No sound is played for movies shot in [ ] mode (= 47) because audio is not
recorded in this mode.
Shooting settings or FUNC. menu settings are not available.
Memory Card
• Available setting items vary by shooting mode. Refer to “Functions Available in Each
Downloaded
fromMenu”,
ManualsCamera.com
134 – 137).
Shooting
Mode”, “FUNC.
and “Shooting Menu” (= Manuals
• Restart the camera, with the memory card in it (= 12).
The memory card is not recognized.
127
Computer
Cannot transfer images to a computer.
When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
• Press the <1> button to enter Playback mode. Hold the <n> button down as
you press the <o> and <m> buttons at the same time. On the next screen, press
the <q><r> buttons to choose [B], and then press the <m> button.
Wi-Fi
• The write-protect tab of the memory card in the destination camera is set to the
locked position. Slide the write-protect tab to the unlocked position.
• Images cannot be resized to be bigger than the resolution setting of their original size.
• In Playback mode, the Wi-Fi menu cannot be accessed during detailed information
display, magnified display, or index display. Switch to single-image display and a
viewing mode other than detailed information display. Similarly, the Wi-Fi menu
cannot be accessed during filtered image display according to specified conditions.
Cancel the playback state of the image in image search mode.
• The Wi-Fi menu cannot be accessed while the camera is connected to a printer,
computer, or TV via a cable. Disconnect the cable.
C
• A total of 20 items of connection information can be added to the camera. Erase
unneeded connection information from the camera first, and then add new devices/
destinations (= 104).
• To add Web services to send images to, install CameraWindow and complete the
settings in CameraWindow (= 89).
• Multiple images may take a long time to send. Try resizing the image to [
to reduce sending time (= 101).
Y
P
O
] or [
]
• Movies may take a long time to send.
• Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band. Note
that images may take a long time to send even when [ ] is displayed.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
• When sending images to a computer from a memory card with a large amount
of images (approximately 1,000), the connection may be disrupted. Import any
necessary images to a computer, and then reduce the number of images on the
memory card by erasing unnecessary images.
Want to erase Wi-Fi connection information before disposing of the
camera or giving it to someone else.
• Reset the Wi-Fi settings (= 105).
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Cannot resize images for sending.
Images take a long time to send./The Wi-Fi connection is disrupted.
• The Wi-Fi menu is not available in Shooting mode. Switch to Playback mode and try
again.
• To add a smartphone as a device, first install the dedicated application
CameraWindow on your smartphone.
• The destination device has insufficient storage space. Increase the storage space on
the destination device and resend the images.
• Movies cannot be resized.
Cannot access the Wi-Fi menu by pressing the <o> button.
Cannot add a device/destination.
Cover
Cannot send images.
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• To add a computer as a device, first install the included software CameraWindow
on the computer. Also check your computer and Wi-Fi environment and settings
(= 94, 95).
• Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
Downloaded from ManualsCamera.com Manuals
128
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
• The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (= 12).
Memory card locked
• The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position (= 12).
Cannot record!
• Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (= 12).
Memory card error (= 110)
• If the same error message is displayed even after you have formatted a supported
memory card (= 2) and have inserted it facing the correct way, contact a Canon
Customer Support Help Desk (= 12).
Insufficient space on card
C
• There is not enough free space on the memory card to shoot (= 30, 44, 54)
or edit images (= 78 – 81). Either erase unneeded images (= 74) or insert a
memory card with enough free space (= 12).
Charge the battery (= 11)
No Image.
• The memory card does not contain any images that can be displayed.
Protected! (= 72)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back MOV/Cannot play back MP4
• Unsupported or corrupt images cannot be displayed.
• It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Downloaded from ManualsCamera.com Manuals
Cover
Cannot magnify!/Cannot play back this content in Smart Shuffle/
Cannot rotate/Cannot modify image/Cannot modify/Cannot assign to
category/Unselectable image.
Preliminary Notes and
Legal Information
• The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies. Magnify* (= 70), Smart Shuffle* (= 72),
Rotate (= 76), Edit* (= 78 – 81), Print List* (= 121), and Photobook Setup* (= 123).
Basic Guide
Invalid selection range
• When specifying a range for image selection (= 73, 76, 122), you attempted to
choose an initial image that was after the final image, or vice-versa.
Y
P
O
Exceeded selection limit
• More than 998 images were selected for Print List (= 121) or Photobook Set-up
(= 123). Choose 998 images or less.
• Print List (= 121) or Photobook Set-up (= 123) settings could not be saved
correctly. Reduce the number of selected images and try again.
• You attempted to choose more than 500 images in Protect (= 72), Erase
(= 74), Favorites (= 77), Print List (= 121), or Photobook Set-up (= 123).
Communication error
• An excessive amount of images (approx. 1,000) on the memory card prevented printing
or image transfer to a computer. To transfer the images, use a commercially available
USB card reader. To print, insert the memory card directly into the printer card slot.
Naming error!
• The folder could not be created or images could not be recorded, because the highest
supported folder number (999) for storing images on the card has been reached and
the highest supported image number (9999) for images in folders has been reached.
In the [3] menu, change [File Numbering] to [Auto Reset] (= 111), or format the
memory card (= 109).
Contents: Basic Operations
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Lens Error
• This error may occur if the lens is held while it is moving, or when the camera is used
in dusty or sandy locations.
• Frequent display of this error message may indicate camera damage. In this case,
contact a Canon Customer Support Help Desk.
129
A camera error was detected (error number)
• If this error message is displayed immediately after a shot, the image may not have
been saved. Switch to Playback mode to check for the image.
• Frequent display of this error message may indicate camera damage. In this case,
write down the error number (Exx) and contact a Canon Customer Support Help
Desk.
File Error
• Correct printing (= 117) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
Wi-Fi
Connection failed
• No access points were recognized. Check the access point settings (= 96).
• A device could not be found. Turn the camera off and on again, and retry the
connection.
• Check the device you want to connect to and make sure it is ready for connection.
• Check the paper size setting (= 119). If this error message is displayed when the
setting is correct, restart the printer and complete the setting on the camera again.
Ink absorber full
• Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
Contents: Basic Operations
Basic Guide
Advanced Guide
• The WPS buttons on numerous access points were pressed simultaneously. Try
reconnecting again.
1
2
3
4
5
6
7
8
9
Y
P
O
• Check to make sure that the access point is turned on.
• When connecting to an access point manually, make sure that you entered the
correct SSID.
Incorrect Wi-Fi encryption key/Incorrect Wi-Fi security settings
• Check the access point security settings (= 95).
IP address conflict
C
Preliminary Notes and
Legal Information
Cannot determine access point
No access points found
Print error
Cover
• Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
• You may be in an environment where Wi-Fi signals are obstructed.
• Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices,
and other devices that operate on the 2.4 GHz band.
• Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
• Check the connected device to make sure it is not experiencing errors.
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Sending failed
Memory card error
• If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk.
Downloaded from ManualsCamera.com Manuals
130
Cover
On-Screen Information
Receiving failed
Insufficient space on card
• There is not enough free space on the memory card to receive images. Erase images
to create space on the memory card, or insert a memory card with sufficient space.
Preliminary Notes and
Legal Information
Shooting (Information Display)
Contents: Basic Operations
Receiving failed
Memory card locked
Basic Guide
• The write-protect tab of the memory card in the camera to receive the images is set to
the locked position. Slide the write-protect tab to the unlocked position.
Receiving failed
Naming error!
• When the highest folder number (999), and the highest image number (9999) have
been reached on the receiving camera, images cannot be received.
Insufficient space on server
• Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space.
• Save the images sent via a server (= 103) on your computer.
SSL certificate not valid
Connect to a computer, use the supplied software to reset
C
• Check to make sure the date/time settings on the camera are correct. After confirming
that the settings are correct, follow the on-screen instructions and reset the settings.
Check network settings
• Check to make sure your computer can connect to the Internet with the current
network settings.
Downloaded from ManualsCamera.com Manuals
Advanced Guide
Y
P
O
Battery level
(= 132)
White balance
(= 57)
My Colors (= 58)
Drive mode
(= 59)
Eco mode (= 108)
Self-timer (= 35)
Grid lines (= 40)
Camera shake
warning (= 32)
Metering method
(= 56)
Compression (image
quality) (= 65) /
Resolution (= 39)
Recordable shots
(= 141)
Movie resolution
(= 40)
Remaining time
(= 142)
Digital zoom
magnification
(= 35), Digital
tele-converter
(= 60)
Shooting mode
(= 134), Scene
icon (= 33)
Focusing range
(= 60), AF lock
(= 63)
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
131
Flash mode
(= 37, 64)
Red-eye correction
(= 39)
Spot AE point frame
(= 56)
AF frame (= 61)
Image stabilization
(= 65)
Date stamp
(= 37)
ISO speed (= 56)
Time zone (= 108)
AE lock (= 55),
FE lock (= 64)
Shutter speed
Aperture value
Exposure
compensation level
(= 55)
i-Contrast (= 57)
Zoom bar (= 31)
IS mode icon
(= 34)
Blink detection
(= 41)
Exposure
compensation bar
(= 55)
Battery Level
An on-screen icon or message indicates the battery charge level.
Display
Details
Sufficient charge
Slightly depleted, but sufficient
(Blinking red)
[Charge the battery]
Nearly depleted—charge the battery soon
Depleted—charge the battery immediately
Downloaded from ManualsCamera.com Manuals
C
Playback (Detailed Information Display)
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
Y
P
O
Movies (= 31,
67) / GPS
information display
(= 68)
Shooting mode
(= 134)
ISO speed
(= 56), Playback
speed (= 47)
Exposure
compensation level
(= 55)
White balance
(= 57)
Histogram (= 68)
Image editing
(= 78 – 81)
Compression (image
quality) (= 65) /
Resolution (= 39,
40), MOV
(movies)
Images have been
saved on a computer
(= 103)
Battery level
(= 132)
Metering method
(= 56)
Folder number - File
number (= 111)
Current image no. /
Total no. of images
Shutter speed (still
images), Image
quality / Frame rate
(movies) (= 40)
Aperture value
i-Contrast (= 57,
80)
Flash (= 64)
Focusing range
(= 60)
File size
Still images:
Resolution (= 141)
Movies: Playback
time (= 142)
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
132
Protection (= 72)
Favorites (= 77)
My Colors (= 58,
80)
Red-eye correction
(= 39, 81)
Cover
Shooting date/time
(= 13)
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
• Some information may not be displayed when viewing images on a TV
(= 115).
Advanced Guide
Summary of Movie Control Panel in “Viewing” (= 67)
Exit
Play
Slow Motion (Press the <q><r> buttons to adjust the playback speed. No
sound is played.)
Skip Backward* (To continue skipping backward, keep holding down the <m>
button.)
Previous Frame (For fast-rewind, keep holding down the <m> button.)
Next Frame (For fast-forward, keep holding down the <m> button.)
C
Skip Forward* (To continue skipping forward, keep holding down the <m>
button.)
*
Edit (= 81)
c
Shown when the camera is connected to a PictBridge-compatible printer
(= 117).
*Displays the frame approx. 4 sec. before or after the current frame.
• To skip forward or back during movie playback, press the <q><r> buttons.
Downloaded from ManualsCamera.com Manuals
Y
P
O
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
133
Cover
Functions and Menu Tables
Preliminary Notes and
Legal Information
Functions Available in Each Shooting Mode
Shooting Mode
4
A
Function
Exposure Compensation (= 55)
Flash (= 37, 64)
h
Z
!
AE Lock (= 55)/FE Lock (= 64)*2
AF Lock (= 63)
Focusing Range (= 60)
eu
Tracking AF (= 61)
Screen Display (= 26)
No Information Display
Information Display
Contents: Basic Operations
Y
T
P
t
N
x
v
–
–
O
O
–
O
O
O
–
O
–
–
O
O
–
O
–
–
O
O
–
O
–
–
O
O
–
O
–
–
–
–
–
O
–
–
–
–
O
–
O
–
O
O
O
O
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
O
–
–
O
O
O
O
O
–
O
O
O
O
O
O
O
–
O
G
I
–
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
–
O
O
O
O
O
O
O
O
–
O
–
–
O
O
–
O
–
–
O
O
–
O
–
–
O
O
–
O
–
–
O
–
–
O
–
–
O
O
–
O
–
–
O
O
–
O
–
–
O
O
–
O
–
–
O
O
–
O
–
–
O
–
–
O
O
O
O
O
O
O
–
–
O
–
–
O
–
–
O
O
O
O
O
–
O
O
–
O
O
–
O
O
O
O
O
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
*1
*1 Not available, but switches to [Z] in some cases.
*2 FE lock not available in [!] flash mode.
Downloaded from ManualsCamera.com Manuals
C
Y
P
O
O Available or set automatically. – Not available.
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
134
Cover
FUNC. Menu
Shooting Mode
A
G
I
O
–
O
O
–
O
–
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
–
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
–
O
–
O
O
O
O
Function
Metering Method (= 56)
 
My Colors (= 58)
1
1
    *  * 
White Balance (= 57)
         
ISO Speed (= 56)
 
*3
       
Self-Timer (= 35)
][$
Self-Timer Settings (= 36)
Delay*4
Shots*5
Drive Mode (= 59)
 
 
 
 
*2
Preliminary Notes and
Legal Information
4
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
Y
P
O
N
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
–
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
O
O
–
–
*6
–
O
O
O
O
O
O
O
–
C
O
t
O
–
O
O
P
x
v
O
–
O
O
Y
T
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Still Image Aspect Ratio (= 38)
O
O
O
     
*1 White balance is not available.
*2 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and skin tone.
*3 Not available in [x] or [v].
*4 Cannot be set to 0 seconds in modes without selection of the number of shots.
*5 One
shot (cannot be
modified)
in modes without selectionManuals
of the number of shots.
Downloaded
from
ManualsCamera.com
*6 Only [ ] and [ ] are available.
O Available or set automatically. – Not available.
135
Cover
Shooting Mode
4
A
 
Y
T
G
I
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
Function
Resolution (= 39)
Compression (= 65)
–
O
–
–
O
O
O
O
O
O
O
O
Movie Quality (= 40)
 
*1 Synchronizes with the aspect ratio setting and is automatically set (= 47).
C
Downloaded from ManualsCamera.com Manuals
–
–
O
–
P
t
N
x
v
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
O
–
O
–
O
–
O
–
–
–
–
–
–
–
–
O
O
O
O
Y
P
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
*1
O
O
O
O
O
O
O
O
O
O Available or set automatically. – Not available.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
136
Cover
4 Shooting Menu
Preliminary Notes and
Legal Information
Shooting Mode
4
A
Function
AF Frame (= 61)
Face AiAF*1
Tracking AF
Center
AF Frame Size (= 62)*2
Normal
Small
Digital Zoom (= 35, 60)
Standard
Off
1.6x/2.0x
AF-Point Zoom (= 41)
On
Off
Servo AF (= 62)
On
Off
Continuous AF (= 63)
On
Off
AF-assist Beam (= 42)
On
Off
O
–
–
G
I
O
O
O
O
O
O
O
–
–
–
–
O
O
O
O
–
–
O
O
–
O
O
O
O
O
–
O
O
–
O
O
O
O
O
O
O
O
–
*3
O
O
O
O
–
O
O
–
O
O
O
O
O
–
O
O
O
O
O
O
O
–
*1 Operation when no faces are detected varies by shooting mode.
*2 Available when the AF frame is set to [Center].
*3 [On] when subject movement is detected in [A] mode.
Downloaded from ManualsCamera.com Manuals
C
O
–
–
O
–
–
O
O
O
–
–
O
–
–
–
O
–
O
Y
P
O
O
O
O
O
O
O
O
O
O
Y
T
P
t
N
x
v
O
O
O
O
O
O
–
–
O
O
O
O
–
–
O
–
–
–
–
O
O
O
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O
–
O
O
–
O
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
O
O
–
O
O
–
O
O
–
–
O
–
O
O
O
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
O
–
O
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
O Available or set automatically. – Not available.
137
Cover
Shooting Mode
4
A
On
Off
On/Off
Red-Eye Lamp
i-Contrast (= 57)
Auto
Off
Review image after shooting (= 43)
Display Time Off/Quick/2 sec./4 sec./8 sec./Hold
Off
Display Info
Detailed
Blink Detection (= 41)
On
Off
Grid Lines (= 40)
On
Off
IS Mode (= 65)
Off/Continuous
Shoot Only
Date Stamp
t
N
x
v
–
O
O
–
O
O
O
O
O
–
–
–
O
O
O
–
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
–
O
–
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
O
–
O
O
–
O
–
O
–
O
–
O
O
–
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
(= 37)
Off
Date / Date & Time
P
I
Function
Flash Settings (= 39, 42)
Red-Eye Corr.
Y
T
G
Downloaded from ManualsCamera.com Manuals
C
Y
P
O
O Available or set automatically. – Not available.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
138
Cover
3 Set up Menu
Item
2 Print Menu
Ref. Page
Item
Ref. Page
Item
Preliminary Notes and
Legal Information
Ref. Page
Item
Ref. Page
Mute
= 107
Format
Select All Images
= 122
Volume
= 107
File Numbering
= 111
Select Images & Qty.
= 121
Clear All Selections
= 122
Hints & Tips
= 107
Create Folder
= 111
Select Range
= 122
Print Settings
= 121
Date/Time
= 13
Units
= 111
Time Zone
= 108
Video System
= 115
Lens Retract
= 108
Wi-Fi Settings
= 83
= 108
Certification Logo Display
= 109, 110
–
Print
Contents: Basic Operations
Basic Guide
Advanced Guide
Slideshow
= 71
Cropping
= 79
Erase
= 74
Resize
= 78
Protect
= 72
My Colors
= 80
1
2
3
4
5
6
7
8
9
Rotate
= 76
Scroll Display
= 68
Index
Favorites
= 77
Auto Rotate
= 77
Photobook Set-up
= 123
Resume
= 68
i-Contrast
= 80
Transition
= 68
Red-Eye Correction
= 81
Eco Mode
= 25, 109
Language
LCD Brightness
= 109
Reset All
Start-up Image
= 109
Power Saving
1 Playback Menu
Item
Ref. Page
Item
Downloaded from ManualsCamera.com Manuals
= 111
= 14
= 112
C
Ref. Page
Playback Mode FUNC. Menu
Y
P
O
Item
Rotate
Ref. Page
Item
Ref. Page
= 76
Play Movie
= 67
Protect
= 72
Smart Shuffle
= 72
Favorites
= 77
Image Search
= 69
Erase
= 74
Slideshow
= 71
Print
= 121
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
139
Specifications
Handling Precautions
Cover
Preliminary Notes and
Legal Information
• The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
Camera Effective
Pixels (Max.)
Approx. 16 million pixels
Contents: Basic Operations
• Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic fields, which may cause malfunction or
erase image data.
Lens Focal Length
8x zoom: 5.0 (W) – 40.0 (T) mm
(35mm film equivalent: 28 (W) – 224 (T) mm)
Basic Guide
Advanced Guide
LCD Monitor
ELPH 130 IS IXUS 140
3.0 type color TFT LCD
Effective Pixels: Approx. 461,000 dots
ELPH 120 IS IXUS 135
2.7 type color TFT LCD
Effective Pixels: Approx. 230,000 dots
File Format
Design rule for Camera File system, DPOF (version 1.1)
compliant
Data Type
Still Images: Exif 2.3 (JPEG)
Movies: MOV (Image data: H.264; Audio data: Linear PCM
(monaural))
Interface
Hi-speed USB
Analog audio output (monaural)
Analog video output (NTSC/PAL)
Wi-Fi Standards
IEEE802.11b/g/n*
*2.4 GHz band only
Wi-Fi Transmission
Methods
OFDM modulation (IEEE 802.11g/n)
DSSS modulation (IEEE 802.11b)
• If water droplets or dirt adheres to the camera or screen, wipe with a dry
soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
• Never use cleaners containing organic solvents to clean the camera or
screen.
• Use a blower brush to remove dust from the lens. If cleaning is difficult,
contact a Canon Customer Support Help Desk.
• To prevent condensation from forming on the camera after sudden
temperature changes (when the camera is transferred from cold to warm
environments), put the camera in an airtight, resealable plastic bag and
let it gradually adjust to the temperature before removing it from the bag.
C
• If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove the
battery and memory card, and wait until the moisture has evaporated
before resuming use.
• Before long-term battery storage, use up the battery’s remaining charge,
remove it from the camera, and store it in a plastic bag or similar
container. Storing a partially charged battery over extended periods
(about a year) may shorten its life or affect performance.
Downloaded from ManualsCamera.com Manuals
Y
P
O
Wi-Fi Communication Infrastructure mode*, Ad hoc mode
*Supports Wi-Fi Protected Setup
Modes
Supported Wi-Fi
Channels
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
ELPH 130 IS ELPH 120 IS 1 – 11
IXUS 140 IXUS 135 1 – 13
Wi-Fi Security
WEP, WPA-PSK (AES/TKIP),
WPA2-PSK (AES/TKIP)
Power Source
Battery Pack NB-11L
AC Adapter Kit ACK-DC90
140
Cover
Dimensions (Based
on CIPA Guidelines)
Weight (Based on
CIPA Guidelines)
Number of 4:3 Shots per Memory Card
ELPH 130 IS IXUS 140
95.4 x 56.0 x 20.6 mm (3.76 x 2.20 x 0.81 in.)
ELPH 120 IS IXUS 135
92.9 x 52.4 x 21.6 mm (3.66 x 2.06 x 0.85 in.)
Recording Pixels
ELPH 130 IS IXUS 140
Approx. 133 g (approx. 4.69 oz.; including the battery and
memory card)
Approx. 117 g (approx. 4.13 oz.; camera body only)
ELPH 120 IS IXUS 135
Approx. 134 g (approx. 4.73 oz.; including the battery and
memory card)
Approx. 118 g (approx. 4.16 oz.; camera body only)
Number of Shots/Recording Time, Playback Time
ELPH 130 IS IXUS 140
Number of Shots
in Eco mode
Approx. 190
Approx. 260
Movie Recording Time*1
Continuous Shooting*2
Approx. 45 minutes
Playback Time
Approx. 4 hours
ELPH 120 IS IXUS 135
C
Number of Shots
in Eco mode
Approx. 200
Approx. 275
Movie Recording Time*1
Continuous Shooting*2
Approx. 1 hour, 35 minutes
Playback Time
Approx. 50 minutes
Approx. 5 hours
(Large)
16M/4608x3456
(Medium 1)
8M/3264x2448
Y
P
O
(Medium 2)
2M/1600x1200
(Small)
0.3M/640x480
Approx. 1 hour, 30 minutes
*1Time under default camera settings, when normal operations are performed, such as
shooting, pausing, turning the camera on and off, and zooming.
*2Time available when shooting the maximum movie length (until recording stops
automatically) repeatedly.
•The number of shots that can be taken is based on measurement guidelines of the
Camera & Imaging Products Association (CIPA).
•Under some shooting conditions, the number of shots and recording time may be less
Downloaded
from ManualsCamera.com Manuals
than
mentioned above.
•Number of shots/time with a fully charged battery.
Compression
Ratio
Number of Shots per Memory Card
(Approx. shots)
Preliminary Notes and
Legal Information
Contents: Basic Operations
8 GB
32 GB
1131
4567
Basic Guide
1903
7684
Advanced Guide
2252
9094
3721
15020
1
2
3
4
5
6
7
8
9
7442
30040
12927
52176
27291
110150
40937
165225
•The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
•The values in the table are based on 4:3 aspect ratio. If the aspect ratio is changed
(= 38), more images can be shot because the data size per image will be smaller
than with 4:3 images. However, since [ ] 16:9 images have a setting of 1920 x 1080
pixels, their data size will be larger than 4:3 images.
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
141
Cover
Recording Time per Memory Card
Shooting Range
Recording Time per Memory Card
Image Quality
8 GB
32 GB
49 min. 15 sec.
3 hr. 19 min. 00 sec.
1 hr. 28 min. 53 sec.
5 hr. 59 min. 05 sec.
•The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
ELPH 130 IS IXUS 140
•Recording will automatically stop when the clip file size reaches 4 GB, or when
the recording time reaches approximately 10 minutes when shooting in [ ], or
approximately 1 hour when shooting in [ ].
ELPH 120 IS IXUS 135
•Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 29 minutes and 59 seconds when shooting in
[ ], or approximately 1 hour when shooting in [ ].
•Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
Flash Range
ELPH 130 IS IXUS 140
Maximum wide angle (j)
50 cm – 3.5 m (1.6 – 11 ft.)
Maximum telephoto (i)
1.3 – 1.7 m (4.3 – 5.6 ft)
ELPH 120 IS IXUS 135
Maximum wide angle (j)
50 cm – 3.0 m (1.6 – 9.8 ft.)
Maximum telephoto (i)
1.3 – 1.5 m (4.3 – 4.9 ft)
Downloaded from ManualsCamera.com Manuals
C
Shooting Mode
Focusing Range
A
–
Maximum Wide
Angle (j)
Maximum Telephoto
(i)
1 cm (0.4 in.) – infinity 1.3 m (4.3 ft.) – infinity
5 cm (2.0 in.) – infinity 1.3 m (4.3 ft.) – infinity
Other modes
1 cm (0.4 in.) – 50 cm
(1.6 ft.)
3 m (9.8 ft.) – infinity
e*
u*
–
3 m (9.8 ft.) – infinity
*Not available in some shooting modes.
Y
P
O
Continuous Shooting Speed
Shooting Mode
G
Speed
Approx. 0.8 shots/sec.
Approx. 2.9 shots/sec.
Shutter Speed
[A] mode, automatically set range
1 – 1/2000 sec.
Aperture
f/number
f/3.2 / f/9.0 (W), f/6.9 / f/20 (T)
Battery Pack NB-11L
Type:
Nominal Voltage:
Nominal Capacity:
Charging Cycles:
Operating Temperatures:
Dimensions:
Weight:
Rechargeable lithium-ion battery
3.6 V DC
680 mAh
Approx. 300 times
0 – 40 °C (32 – 104 °F)
34.6 x 40.2 x 5.2 mm (1.36 x 1.58 x 0.20 in.)
Approx. 13 g (approx. 0.46 oz.)
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
142
Cover
Battery Charger CB-2LF/CB-2LFE
Preliminary Notes and
Legal Information
Rated Input:
100 – 240 V AC (50/60 Hz)
4.2 V DC, 0.41 A
Rated Output:
Charging Time:
Approx. 2 hr. (when using NB-11L)
Charge Indicator:Charging: orange / Fully charged: green
(two-indicator system)
Operating Temperatures: 5 – 40 °C (41 – 104 °F)
Contents: Basic Operations
Basic Guide
Advanced Guide
•All data is based on tests by Canon.
•Camera specifications or appearance are subject to change without notice.
C
Downloaded from ManualsCamera.com Manuals
Y
P
O
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
143
Index
D
A
C
AC adapter kit......................................114
Accessories.........................................114
Access point
Manual settings.............................. 98
Number of display items................. 98
Adding target devices
Camera.......................................... 93
Computer....................................... 96
Printer............................................. 99
Smartphone.................................... 91
Web services.................................. 89
AE lock................................................. 55
AF frames............................................. 61
AF lock................................................. 63
Aspect ratio.......................................... 38
AUTO mode (shooting mode)......... 15, 31
AV cable..............................................115
Camera................................................ 111
Adding target devices..................... 93
Nickname....................................... 88
Reset all........................................112
Camera access point mode............ 91, 99
Camera shake...................................... 65
CameraWindow
Display........................................... 98
CANON iMAGE GATEWAY
Settings.......................................... 89
Center (AF frame mode)...................... 62
Clock.................................................... 29
Color Accent (shooting mode).............. 49
Color Swap (shooting mode)................ 49
Color (white balance)........................... 57
Compression ratio (image quality)........ 65
Computer
Adding target devices..................... 96
Environment................................... 19
Preparation..................................... 94
Connection
Web services.................................. 90
Connection information
Changing nickname..................... 105
Editing.......................................... 104
Erase............................................ 105
Continuous shooting............................. 59
Creative filters (shooting mode)........... 46
Cropping............................................... 79
Custom white balance.......................... 58
B
Batteries  Date/time (date/time battery)
Battery
Charging..........................................11
Eco mode..................................... 108
Level............................................. 132
Power saving.................................. 25
Battery charger....................................... 2
Black and white images........................ 58
Blink detection...................................... 41
Downloaded from ManualsCamera.com Manuals
C
Date/time
Adding date stamps....................... 37
Changing........................................ 13
Date/time battery............................ 14
Settings.......................................... 13
World clock................................... 108
DC coupler..........................................116
DIGITAL CAMERA Solution Disk............ 2
Digital tele-converter............................ 60
Digital zoom.......................................... 35
Display language.................................. 14
DPOF.................................................. 121
Drive mode........................................... 59
Y
P
O
E
Eco mode........................................... 108
Editing
Cropping......................................... 79
i-Contrast........................................ 80
My Colors....................................... 80
Red-eye correction......................... 81
Resizing images............................. 78
Erasing................................................. 74
Error messages.................................. 129
Exposure
AE lock........................................... 55
Compensation................................ 55
FE lock........................................... 64
F
Face AiAF (AF frame mode)................. 61
Face self-timer (shooting mode)........... 51
Favorites............................................... 77
FE lock................................................. 64
File numbering..................................... 111
Fireworks (shooting mode)................... 45
Fish-eye effect (shooting mode)........... 46
Flash
Deactivating flash........................... 37
On.................................................. 64
Slow synchro.................................. 64
Focusing
AF frames....................................... 61
AF lock........................................... 63
AF-point zoom................................ 41
Servo AF........................................ 62
Focusing range
Infinity............................................. 60
Macro............................................. 60
Focus lock............................................ 62
FUNC. menu
Basic operations............................. 27
Table..................................... 135, 139
G
GPS...................................................... 68
Grid lines.............................................. 40
I
i-Contrast........................................ 57, 80
Image quality  Compression ratio
(image quality)
Images
Erasing........................................... 74
Playback  Viewing
Protecting....................................... 72
Indicator................................................ 29
Infinity (focus mode)............................. 60
Interface cable.................................. 2, 20
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
144
ISO speed............................................ 56
L
Lamp.................................................... 42
Long shutter (shooting mode).............. 52
Low light (shooting mode).................... 45
M
MAC address........................................ 95
Macro (focus mode)............................. 60
Magnified display.................................. 70
Memory cards................................... 2, 88
Recording time............................. 142
Menu
Basic operations............................. 28
Table............................................. 134
Metering method.................................. 56
Miniature effect (shooting mode).......... 47
Monochrome (shooting mode)............. 48
Movies
Editing............................................ 81
Image quality
(resolution/frame rate).................... 40
Recording time............................. 142
My Colors....................................... 58, 80
PictBridge.................................... 114, 117
Playback  Viewing
Portrait (shooting mode)....................... 45
Poster effect (shooting mode).............. 46
Power  AC adapter kit
 Battery
Power saving........................................ 25
Printing................................................117
Program AE.......................................... 55
Protecting............................................. 72
P (shooting mode)................................ 55
R
Red-eye correction......................... 39, 81
Reset all..............................................112
Resetting Wi-Fi settings..................... 105
Resizing images................................... 78
Resolution (image size)........................ 39
Rotating................................................ 76
S
C
Saving images to a computer............... 98
Screen
Display language............................ 14
Icons..................................... 131, 132
Menu  FUNC. menu, Menu
N
SD/SDHC/SDXC memory cards
Nickname
 Memory cards
Camera.......................................... 88
Searching............................................. 69
Device.......................................... 105
Self-timer.............................................. 35
P
2-second self-timer......................... 36
Customizing the self-timer.............. 36
Package contents................................... 2
Face self-timer (shooting mode).... 51
Photobook set-up............................... 123
Wink self-timer
(shooting mode).... 51
Downloaded from ManualsCamera.com
Manuals
Sending images.................................. 101
Maximum number of images
that can be sent together............. 101
Sepia tone images................................ 58
Servo AF............................................... 62
Shooting
Shooting date/time  Date/time
Shooting information.................... 131
Slideshow............................................. 71
Smartphone
Adding target devices..................... 91
Changing privacy settings.............. 93
Privacy settings.............................. 92
Smart Shuffle........................................ 72
Smart Shutter (shooting mode)............ 50
Smile (shooting mode)......................... 50
Snow (shooting mode)......................... 45
Software
DIGITAL CAMERA Solution Disk..... 2
Installation...................................... 19
Saving images to a computer......... 19
Sounds............................................... 107
Stitch Assist (shooting mode)............... 53
Y
P
O
Strap..................................................2, 11
Super vivid (shooting mode)................. 46
T
Terminal....................................... 115, 117
Toy camera effect (shooting mode)...... 48
Tracking AF.......................................... 61
Traveling with the camera.................. 108
Troubleshooting.................................. 126
TV display............................................115
V
Viewing................................................. 16
Image search................................. 69
Index display.................................. 69
Magnified display........................... 70
Single-image display...................... 16
Slideshow....................................... 71
Smart Shuffle................................. 72
TV display.....................................115
W
Web services
Adding target devices..................... 89
Connection..................................... 90
Display order.................................. 90
White balance (color)........................... 57
Wi-Fi..................................................... 84
Access point................................... 95
Settings.......................................... 95
Windows
CameraWindow display................. 98
Settings.......................................... 95
Wink self-timer (shooting mode)........... 51
World Clock........................................ 108
WPS
PBC Method................................... 96
PIN Method.................................... 97
Wrist strap  Strap
Cover
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Z
Zoom........................................ 15, 31, 35
145
Cover
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
FCC/IC Notice
Models: ELPH 130 IS PC1889/ ELPH 120 IS PC1896 (including WLAN Module Model
WM218, FCC ID: AZD218)
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however, that
these low power wireless devices are absolutely safe. Low power Wireless devices
emit low levels of radio frequency energy (RF) in the microwave range while being
used. Whereas high levels of RF can produce health effects (by heating tissue),
exposure to low-level RF that does not produce heating effects causes no known
adverse health effects. Many studies of low-level RF exposures have not found any
biological effects. Some studies have suggested that some biological effects might
occur, but such findings have not been confirmed by additional research. This model
has been tested and found to comply with FCC/IC radiation exposure limits set forth
for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)
Exposure rules.
C
This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
USA and Canada only:
The Lithium ion/polymer battery that powers the product is recyclable.
Please call 1-800-8-BATTERY for information on how to recycle this
battery.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
For CA, USA only
Included lithium battery contains Perchlorate Material - special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
Y
P
O
Trademark Acknowledgments
• The SDXC logo is a trademark of SD-3C, LLC.
• This device incorporates exFAT technology licensed from Microsoft.
• Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™
are trademarks or registered trademarks of the Wi-Fi Alliance.
About MPEG-4 Licensing
This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or decoding
MPEG-4 compliant video that was encoded only (1) for a personal and
non-commercial purpose or (2) by a video provider licensed under the AT&T
patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
This product is installed with the WLAN Module which is certified to
standards set by IDA Singapore.
Downloaded from ManualsCamera.com Manuals
146
Cover
FCC Notice
(Digital Camera, Model ELPH 130 IS PC1889/ ELPH 120 IS PC1896 systems)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class
B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
C
The cable with the ferrite core provided with the digital camera must be used with this
equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC
rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you could
be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Park, Melville, New York 11747, U.S.A.
Tel No. 1-800-OK-CANON (1-800-652-2666)
Canadian Radio Interference Regulations
Battery Charger CB-2LF
IMPORTANT SAFETY INSTRUCTIONSSAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK
OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE
INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug adapter of
the proper configuration for the power outlet, if needed.
Y
P
O
Battery Charger CB-2LFE
The adapter can be used with a power supply between 100 and 240 V AC.
Contact your Canon dealer for information about plug adapter for overseas use.
For U.S.A. customers only: For areas where 120 V AC power is not used, you will
need a special plug adapter.
For only United States
Use a UL listed, 1.8-3m(6-10ft), Type SPT-2 or NTSPT-2, AWG no.18 power
supply cord, rated for 125V 7A, with a non-polarized NEMA 1-15P plug rated for
125V 15A
Battery Charger CB-2LFE
In normal use, keep the LED side face-up.
Disclaimer
• Reprinting, transmitting, or storing in a retrieval system any part of
this guide without the permission of Canon is prohibited.
• Canon reserves the right to change the contents of this guide at any
time without prior notice.
• Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
• The above items notwithstanding, Canon accepts no liability for
damages due to mistaken operation of the products.
Preliminary Notes and
Legal Information
Contents: Basic Operations
Basic Guide
Advanced Guide
1
2
3
4
5
6
7
8
9
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
CAN ICES-3 (B)/NMB-3 (B)
Downloaded from ManualsCamera.com Manuals
147